Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

26 files changed, 2735 insertions, 47 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b7d5ef234ac9..4e007c6a4b44 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -2,6 +2,14 @@
 # Misc strange devices
 #
 
+# This one has to live outside of the MISC_DEVICES conditional,
+# because it may be selected by drivers/platform/x86/hp_accel.
+config SENSORS_LIS3LV02D
+	tristate
+	depends on INPUT
+	select INPUT_POLLDEV
+	default n
+
 menuconfig MISC_DEVICES
 	bool "Misc devices"
 	---help---
@@ -394,6 +402,16 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
+config SPEAR13XX_PCIE_GADGET
+	bool "PCIe gadget support for SPEAr13XX platform"
+	depends on ARCH_SPEAR13XX
+	default n
+	help
+	 This option enables gadget support for PCIe controller. If
+	 board file defines any controller as PCIe endpoint then a sysfs
+	 entry will be created for that controller. User can use these
+	 sysfs node to configure PCIe EP as per his requirements.
+
 config TI_DAC7512
 	tristate "Texas Instruments DAC7512"
 	depends on SPI && SYSFS
@@ -462,5 +480,6 @@ source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
 source "drivers/misc/iwmc3200top/Kconfig"
 source "drivers/misc/ti-st/Kconfig"
+source "drivers/misc/lis3lv02d/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc20cb9..f5468602961f 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,8 +37,10 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-$(CONFIG_HMC6352)		+= hmc6352.o
 obj-y				+= eeprom/
 obj-y				+= cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET)	+= spear13xx_pcie_gadget.o
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
 obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
 obj-y				+= ti-st/
 obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
+obj-y				+= lis3lv02d/
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index 644d4cd071cc..81db7811cf68 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -245,9 +245,8 @@ static int apds9802als_probe(struct i2c_client *client,
 	als_set_default_config(client);
 	mutex_init(&data->mutex);
 
+	pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
-	pm_runtime_get(&client->dev);
-	pm_runtime_put(&client->dev);
 
 	return res;
 als_error1:
@@ -255,12 +254,19 @@ als_error1:
 	return res;
 }
 
-static int apds9802als_remove(struct i2c_client *client)
+static int __devexit apds9802als_remove(struct i2c_client *client)
 {
 	struct als_data *data = i2c_get_clientdata(client);
 
+	pm_runtime_get_sync(&client->dev);
+
 	als_set_power_state(client, false);
 	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
 	kfree(data);
 	return 0;
 }
@@ -275,9 +281,6 @@ static int apds9802als_suspend(struct i2c_client *client, pm_message_t mesg)
 static int apds9802als_resume(struct i2c_client *client)
 {
 	als_set_default_config(client);
-
-	pm_runtime_get(&client->dev);
-	pm_runtime_put(&client->dev);
 	return 0;
 }
 
@@ -323,7 +326,7 @@ static struct i2c_driver apds9802als_driver = {
 		.pm = APDS9802ALS_PM_OPS,
 	},
 	.probe = apds9802als_probe,
-	.remove = apds9802als_remove,
+	.remove = __devexit_p(apds9802als_remove),
 	.suspend = apds9802als_suspend,
 	.resume = apds9802als_resume,
 	.id_table = apds9802als_id,
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index 3891124001f2..a844810b50f6 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -75,7 +75,7 @@ out:
 	return tc;
 
 fail_ioremap:
-	release_resource(r);
+	release_mem_region(r->start, ATMEL_TC_IOMEM_SIZE);
 fail:
 	tc = NULL;
 	goto out;
@@ -95,7 +95,7 @@ void atmel_tc_free(struct atmel_tc *tc)
 	spin_lock(&tc_list_lock);
 	if (tc->regs) {
 		iounmap(tc->regs);
-		release_resource(tc->iomem);
+		release_mem_region(tc->iomem->start, ATMEL_TC_IOMEM_SIZE);
 		tc->regs = NULL;
 		tc->iomem = NULL;
 	}
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index d5f3a3fd2319..d07cd67c951c 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -196,10 +196,11 @@ static int __devexit bh1780_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
+static int bh1780_suspend(struct device *dev)
 {
 	struct bh1780_data *ddata;
 	int state, ret;
+	struct i2c_client *client = to_i2c_client(dev);
 
 	ddata = i2c_get_clientdata(client);
 	state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
@@ -217,14 +218,14 @@ static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int bh1780_resume(struct i2c_client *client)
+static int bh1780_resume(struct device *dev)
 {
 	struct bh1780_data *ddata;
 	int state, ret;
+	struct i2c_client *client = to_i2c_client(dev);
 
 	ddata = i2c_get_clientdata(client);
 	state = ddata->power_state;
-
 	ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
 				"CONTROL");
 
@@ -233,9 +234,10 @@ static int bh1780_resume(struct i2c_client *client)
 
 	return 0;
 }
+static SIMPLE_DEV_PM_OPS(bh1780_pm, bh1780_suspend, bh1780_resume);
+#define BH1780_PMOPS (&bh1780_pm)
 #else
-#define bh1780_suspend NULL
-#define bh1780_resume NULL
+#define BH1780_PMOPS NULL
 #endif /* CONFIG_PM */
 
 static const struct i2c_device_id bh1780_id[] = {
@@ -247,11 +249,10 @@ static struct i2c_driver bh1780_driver = {
 	.probe		= bh1780_probe,
 	.remove		= bh1780_remove,
 	.id_table	= bh1780_id,
-	.suspend	= bh1780_suspend,
-	.resume		= bh1780_resume,
 	.driver = {
-		.name = "bh1780"
-	},
+		.name = "bh1780",
+		.pm	= BH1780_PMOPS,
+},
 };
 
 static int __init bh1780_init(void)
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index b6e1c9a6679e..5f898cb706a6 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -2,7 +2,7 @@
 
     This driver supports the bmp085 digital barometric pressure
     and temperature sensor from Bosch Sensortec. The datasheet
-    is avaliable from their website:
+    is available from their website:
     http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
 
     A pressure measurement is issued by reading from pressure0_input.
@@ -402,7 +402,7 @@ exit:
 	return status;
 }
 
-static int bmp085_probe(struct i2c_client *client,
+static int __devinit bmp085_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct bmp085_data *data;
@@ -429,7 +429,7 @@ static int bmp085_probe(struct i2c_client *client,
 	if (err)
 		goto exit_free;
 
-	dev_info(&data->client->dev, "Succesfully initialized bmp085!\n");
+	dev_info(&data->client->dev, "Successfully initialized bmp085!\n");
 	goto exit;
 
 exit_free:
@@ -438,7 +438,7 @@ exit:
 	return err;
 }
 
-static int bmp085_remove(struct i2c_client *client)
+static int __devexit bmp085_remove(struct i2c_client *client)
 {
 	sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
 	kfree(i2c_get_clientdata(client));
@@ -458,7 +458,7 @@ static struct i2c_driver bmp085_driver = {
 	},
 	.id_table	= bmp085_id,
 	.probe		= bmp085_probe,
-	.remove		= bmp085_remove,
+	.remove		= __devexit_p(bmp085_remove),
 
 	.detect		= bmp085_detect,
 	.address_list	= normal_i2c
diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c
index 338dcc121507..778fc3fdfb9b 100644
--- a/drivers/misc/c2port/c2port-duramar2150.c
+++ b/drivers/misc/c2port/c2port-duramar2150.c
@@ -41,7 +41,7 @@ static void duramar2150_c2port_access(struct c2port_device *dev, int status)
 		outb(v | (C2D | C2CK), DIR_PORT);
 	else
 		/* When access is "off" is important that both lines are set
-		 * as inputs or hi-impedence */
+		 * as inputs or hi-impedance */
 		outb(v & ~(C2D | C2CK), DIR_PORT);
 
 	mutex_unlock(&update_lock);
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile
index 7b80cbf1a609..467c8e9ca3c9 100644
--- a/drivers/misc/cb710/Makefile
+++ b/drivers/misc/cb710/Makefile
@@ -1,6 +1,4 @@
-ifeq ($(CONFIG_CB710_DEBUG),y)
-	EXTRA_CFLAGS		+= -DDEBUG
-endif
+ccflags-$(CONFIG_CB710_DEBUG)	:= -DDEBUG
 
 obj-$(CONFIG_CB710_CORE)	+= cb710.o
 
diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c
index 46b3439673e9..16d7179e2f9b 100644
--- a/drivers/misc/ep93xx_pwm.c
+++ b/drivers/misc/ep93xx_pwm.c
@@ -249,11 +249,11 @@ static ssize_t ep93xx_pwm_set_invert(struct device *dev,
 
 static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL);
 static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL);
-static DEVICE_ATTR(freq, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(freq, S_IWUSR | S_IRUGO,
 		   ep93xx_pwm_get_freq, ep93xx_pwm_set_freq);
-static DEVICE_ATTR(duty_percent, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(duty_percent, S_IWUSR | S_IRUGO,
 		   ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent);
-static DEVICE_ATTR(invert, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(invert, S_IWUSR | S_IRUGO,
 		   ep93xx_pwm_get_invert, ep93xx_pwm_set_invert);
 
 static struct attribute *ep93xx_pwm_attrs[] = {
diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c
index 234bfcaf2099..ca938fc8a8d6 100644
--- a/drivers/misc/hmc6352.c
+++ b/drivers/misc/hmc6352.c
@@ -75,7 +75,7 @@ static ssize_t compass_heading_data_show(struct device *dev,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	unsigned char i2c_data[2];
-	unsigned int ret;
+	int ret;
 
 	mutex_lock(&compass_mutex);
 	ret = compass_command(client, 'A');
@@ -86,7 +86,7 @@ static ssize_t compass_heading_data_show(struct device *dev,
 	msleep(10); /* sending 'A' cmd we need to wait for 7-10 millisecs */
 	ret = i2c_master_recv(client, i2c_data, 2);
 	mutex_unlock(&compass_mutex);
-	if (ret != 1) {
+	if (ret < 0) {
 		dev_warn(dev, "i2c read data cmd failed\n");
 		return ret;
 	}
diff --git a/drivers/misc/ibmasm/remote.h b/drivers/misc/ibmasm/remote.h
index 72acf5af7a2a..00dbf1d4373a 100644
--- a/drivers/misc/ibmasm/remote.h
+++ b/drivers/misc/ibmasm/remote.h
@@ -20,7 +20,7 @@
  *
  * Author: Max Asböck <amax@us.ibm.com>
  *
- * Orignally written by Pete Reynolds
+ * Originally written by Pete Reynolds
  */
 
 #ifndef _IBMASM_REMOTE_H_
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
index 727af07f1fbd..b1f4563be9ae 100644
--- a/drivers/misc/iwmc3200top/main.c
+++ b/drivers/misc/iwmc3200top/main.c
@@ -268,7 +268,7 @@ static void iwmct_irq_read_worker(struct work_struct *ws)
 		LOG_INFO(priv, IRQ, "ACK barker arrived "
 				"- starting FW download\n");
 	} else { /* REBOOT barker */
-		LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker);
+		LOG_INFO(priv, IRQ, "Received reboot barker: %x\n", barker);
 		priv->barker = barker;
 
 		if (barker & BARKER_DNLOAD_SYNC_MSK) {
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 59c118c19a91..74f16f167b8e 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -645,7 +645,7 @@ static int validate_simple_test(char *put_str)
 
 	while (*chk_str != '\0' && *put_str != '\0') {
 		/* If someone does a * to match the rest of the string, allow
-		 * it, or stop if the recieved string is complete.
+		 * it, or stop if the received string is complete.
 		 */
 		if (*put_str == '#' || *chk_str == '*')
 			return 0;
@@ -988,7 +988,7 @@ static void kgdbts_run_tests(void)
 
 static int kgdbts_option_setup(char *opt)
 {
-	if (strlen(opt) > MAX_CONFIG_LEN) {
+	if (strlen(opt) >= MAX_CONFIG_LEN) {
 		printk(KERN_ERR "kgdbts: config string too long\n");
 		return -ENOSPC;
 	}
diff --git a/drivers/misc/lis3lv02d/Kconfig b/drivers/misc/lis3lv02d/Kconfig
new file mode 100644
index 000000000000..8f474e6fc7b4
--- /dev/null
+++ b/drivers/misc/lis3lv02d/Kconfig
@@ -0,0 +1,37 @@
+#
+# STMicroelectonics LIS3LV02D and similar accelerometers
+#
+
+config SENSORS_LIS3_SPI
+	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
+	depends on !ACPI && SPI_MASTER && INPUT
+	select SENSORS_LIS3LV02D
+	default n
+	help
+	  This driver provides support for the LIS3LV02Dx accelerometer connected
+	  via SPI. The accelerometer data is readable via
+	  /sys/devices/platform/lis3lv02d.
+
+	  This driver also provides an absolute input class device, allowing
+	  the laptop to act as a pinball machine-esque joystick.
+
+	  This driver can also be built as modules.  If so, the core module
+	  will be called lis3lv02d and a specific module for the SPI transport
+	  is called lis3lv02d_spi.
+
+config SENSORS_LIS3_I2C
+	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
+	depends on I2C && INPUT
+	select SENSORS_LIS3LV02D
+	default n
+	help
+	  This driver provides support for the LIS3LV02Dx accelerometer connected
+	  via I2C. The accelerometer data is readable via
+	  /sys/devices/platform/lis3lv02d.
+
+	  This driver also provides an absolute input class device, allowing
+	  the device to act as a pinball machine-esque joystick.
+
+	  This driver can also be built as modules.  If so, the core module
+	  will be called lis3lv02d and a specific module for the I2C transport
+	  is called lis3lv02d_i2c.
diff --git a/drivers/misc/lis3lv02d/Makefile b/drivers/misc/lis3lv02d/Makefile
new file mode 100644
index 000000000000..4bf58b16fcf8
--- /dev/null
+++ b/drivers/misc/lis3lv02d/Makefile
@@ -0,0 +1,7 @@
+#
+# STMicroelectonics LIS3LV02D and similar accelerometers
+#
+
+obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o
+obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d_spi.o
+obj-$(CONFIG_SENSORS_LIS3_I2C)	+= lis3lv02d_i2c.o
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
new file mode 100644
index 000000000000..b928bc14e97b
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -0,0 +1,999 @@
+/*
+ *  lis3lv02d.c - ST LIS3LV02DL accelerometer driver
+ *
+ *  Copyright (C) 2007-2008 Yan Burman
+ *  Copyright (C) 2008 Eric Piel
+ *  Copyright (C) 2008-2009 Pavel Machek
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input-polldev.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/freezer.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pm_runtime.h>
+#include <linux/atomic.h>
+#include "lis3lv02d.h"
+
+#define DRIVER_NAME     "lis3lv02d"
+
+/* joystick device poll interval in milliseconds */
+#define MDPS_POLL_INTERVAL 50
+#define MDPS_POLL_MIN	   0
+#define MDPS_POLL_MAX	   2000
+
+#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */
+
+#define SELFTEST_OK	       0
+#define SELFTEST_FAIL	       -1
+#define SELFTEST_IRQ	       -2
+
+#define IRQ_LINE0	       0
+#define IRQ_LINE1	       1
+
+/*
+ * The sensor can also generate interrupts (DRDY) but it's pretty pointless
+ * because they are generated even if the data do not change. So it's better
+ * to keep the interrupt for the free-fall event. The values are updated at
+ * 40Hz (at the lowest frequency), but as it can be pretty time consuming on
+ * some low processor, we poll the sensor only at 20Hz... enough for the
+ * joystick.
+ */
+
+#define LIS3_PWRON_DELAY_WAI_12B	(5000)
+#define LIS3_PWRON_DELAY_WAI_8B		(3000)
+
+/*
+ * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG
+ * LIS302D spec says: 18 mG / digit
+ * LIS3_ACCURACY is used to increase accuracy of the intermediate
+ * calculation results.
+ */
+#define LIS3_ACCURACY			1024
+/* Sensitivity values for -2G +2G scale */
+#define LIS3_SENSITIVITY_12B		((LIS3_ACCURACY * 1000) / 1024)
+#define LIS3_SENSITIVITY_8B		(18 * LIS3_ACCURACY)
+
+#define LIS3_DEFAULT_FUZZ_12B		3
+#define LIS3_DEFAULT_FLAT_12B		3
+#define LIS3_DEFAULT_FUZZ_8B		1
+#define LIS3_DEFAULT_FLAT_8B		1
+
+struct lis3lv02d lis3_dev = {
+	.misc_wait   = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
+};
+EXPORT_SYMBOL_GPL(lis3_dev);
+
+/* just like param_set_int() but does sanity-check so that it won't point
+ * over the axis array size
+ */
+static int param_set_axis(const char *val, const struct kernel_param *kp)
+{
+	int ret = param_set_int(val, kp);
+	if (!ret) {
+		int val = *(int *)kp->arg;
+		if (val < 0)
+			val = -val;
+		if (!val || val > 3)
+			return -EINVAL;
+	}
+	return ret;
+}
+
+static struct kernel_param_ops param_ops_axis = {
+	.set = param_set_axis,
+	.get = param_get_int,
+};
+
+module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644);
+MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions");
+
+static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg)
+{
+	s8 lo;
+	if (lis3->read(lis3, reg, &lo) < 0)
+		return 0;
+
+	return lo;
+}
+
+static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg)
+{
+	u8 lo, hi;
+
+	lis3->read(lis3, reg - 1, &lo);
+	lis3->read(lis3, reg, &hi);
+	/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+	return (s16)((hi << 8) | lo);
+}
+
+/**
+ * lis3lv02d_get_axis - For the given axis, give the value converted
+ * @axis:      1,2,3 - can also be negative
+ * @hw_values: raw values returned by the hardware
+ *
+ * Returns the converted value.
+ */
+static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3])
+{
+	if (axis > 0)
+		return hw_values[axis - 1];
+	else
+		return -hw_values[-axis - 1];
+}
+
+/**
+ * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
+ * @lis3: pointer to the device struct
+ * @x:    where to store the X axis value
+ * @y:    where to store the Y axis value
+ * @z:    where to store the Z axis value
+ *
+ * Note that 40Hz input device can eat up about 10% CPU at 800MHZ
+ */
+static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
+{
+	int position[3];
+	int i;
+
+	if (lis3->blkread) {
+		if (lis3_dev.whoami == WAI_12B) {
+			u16 data[3];
+			lis3->blkread(lis3, OUTX_L, 6, (u8 *)data);
+			for (i = 0; i < 3; i++)
+				position[i] = (s16)le16_to_cpu(data[i]);
+		} else {
+			u8 data[5];
+			/* Data: x, dummy, y, dummy, z */
+			lis3->blkread(lis3, OUTX, 5, data);
+			for (i = 0; i < 3; i++)
+				position[i] = (s8)data[i * 2];
+		}
+	} else {
+		position[0] = lis3->read_data(lis3, OUTX);
+		position[1] = lis3->read_data(lis3, OUTY);
+		position[2] = lis3->read_data(lis3, OUTZ);
+	}
+
+	for (i = 0; i < 3; i++)
+		position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY;
+
+	*x = lis3lv02d_get_axis(lis3->ac.x, position);
+	*y = lis3lv02d_get_axis(lis3->ac.y, position);
+	*z = lis3lv02d_get_axis(lis3->ac.z, position);
+}
+
+/* conversion btw sampling rate and the register values */
+static int lis3_12_rates[4] = {40, 160, 640, 2560};
+static int lis3_8_rates[2] = {100, 400};
+static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
+
+/* ODR is Output Data Rate */
+static int lis3lv02d_get_odr(void)
+{
+	u8 ctrl;
+	int shift;
+
+	lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
+	ctrl &= lis3_dev.odr_mask;
+	shift = ffs(lis3_dev.odr_mask) - 1;
+	return lis3_dev.odrs[(ctrl >> shift)];
+}
+
+static int lis3lv02d_set_odr(int rate)
+{
+	u8 ctrl;
+	int i, len, shift;
+
+	if (!rate)
+		return -EINVAL;
+
+	lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
+	ctrl &= ~lis3_dev.odr_mask;
+	len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */
+	shift = ffs(lis3_dev.odr_mask) - 1;
+
+	for (i = 0; i < len; i++)
+		if (lis3_dev.odrs[i] == rate) {
+			lis3_dev.write(&lis3_dev, CTRL_REG1,
+					ctrl | (i << shift));
+			return 0;
+		}
+	return -EINVAL;
+}
+
+static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
+{
+	u8 ctlreg, reg;
+	s16 x, y, z;
+	u8 selftest;
+	int ret;
+	u8 ctrl_reg_data;
+	unsigned char irq_cfg;
+
+	mutex_lock(&lis3->mutex);
+
+	irq_cfg = lis3->irq_cfg;
+	if (lis3_dev.whoami == WAI_8B) {
+		lis3->data_ready_count[IRQ_LINE0] = 0;
+		lis3->data_ready_count[IRQ_LINE1] = 0;
+
+		/* Change interrupt cfg to data ready for selftest */
+		atomic_inc(&lis3_dev.wake_thread);
+		lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY;
+		lis3->read(lis3, CTRL_REG3, &ctrl_reg_data);
+		lis3->write(lis3, CTRL_REG3, (ctrl_reg_data &
+				~(LIS3_IRQ1_MASK | LIS3_IRQ2_MASK)) |
+				(LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY));
+	}
+
+	if (lis3_dev.whoami == WAI_3DC) {
+		ctlreg = CTRL_REG4;
+		selftest = CTRL4_ST0;
+	} else {
+		ctlreg = CTRL_REG1;
+		if (lis3_dev.whoami == WAI_12B)
+			selftest = CTRL1_ST;
+		else
+			selftest = CTRL1_STP;
+	}
+
+	lis3->read(lis3, ctlreg, &reg);
+	lis3->write(lis3, ctlreg, (reg | selftest));
+	msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+	/* Read directly to avoid axis remap */
+	x = lis3->read_data(lis3, OUTX);
+	y = lis3->read_data(lis3, OUTY);
+	z = lis3->read_data(lis3, OUTZ);
+
+	/* back to normal settings */
+	lis3->write(lis3, ctlreg, reg);
+	msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+	results[0] = x - lis3->read_data(lis3, OUTX);
+	results[1] = y - lis3->read_data(lis3, OUTY);
+	results[2] = z - lis3->read_data(lis3, OUTZ);
+
+	ret = 0;
+
+	if (lis3_dev.whoami == WAI_8B) {
+		/* Restore original interrupt configuration */
+		atomic_dec(&lis3_dev.wake_thread);
+		lis3->write(lis3, CTRL_REG3, ctrl_reg_data);
+		lis3->irq_cfg = irq_cfg;
+
+		if ((irq_cfg & LIS3_IRQ1_MASK) &&
+			lis3->data_ready_count[IRQ_LINE0] < 2) {
+			ret = SELFTEST_IRQ;
+			goto fail;
+		}
+
+		if ((irq_cfg & LIS3_IRQ2_MASK) &&
+			lis3->data_ready_count[IRQ_LINE1] < 2) {
+			ret = SELFTEST_IRQ;
+			goto fail;
+		}
+	}
+
+	if (lis3->pdata) {
+		int i;
+		for (i = 0; i < 3; i++) {
+			/* Check against selftest acceptance limits */
+			if ((results[i] < lis3->pdata->st_min_limits[i]) ||
+			    (results[i] > lis3->pdata->st_max_limits[i])) {
+				ret = SELFTEST_FAIL;
+				goto fail;
+			}
+		}
+	}
+
+	/* test passed */
+fail:
+	mutex_unlock(&lis3->mutex);
+	return ret;
+}
+
+/*
+ * Order of registers in the list affects to order of the restore process.
+ * Perhaps it is a good idea to set interrupt enable register as a last one
+ * after all other configurations
+ */
+static u8 lis3_wai8_regs[] = { FF_WU_CFG_1, FF_WU_THS_1, FF_WU_DURATION_1,
+			       FF_WU_CFG_2, FF_WU_THS_2, FF_WU_DURATION_2,
+			       CLICK_CFG, CLICK_SRC, CLICK_THSY_X, CLICK_THSZ,
+			       CLICK_TIMELIMIT, CLICK_LATENCY, CLICK_WINDOW,
+			       CTRL_REG1, CTRL_REG2, CTRL_REG3};
+
+static u8 lis3_wai12_regs[] = {FF_WU_CFG, FF_WU_THS_L, FF_WU_THS_H,
+			       FF_WU_DURATION, DD_CFG, DD_THSI_L, DD_THSI_H,
+			       DD_THSE_L, DD_THSE_H,
+			       CTRL_REG1, CTRL_REG3, CTRL_REG2};
+
+static inline void lis3_context_save(struct lis3lv02d *lis3)
+{
+	int i;
+	for (i = 0; i < lis3->regs_size; i++)
+		lis3->read(lis3, lis3->regs[i], &lis3->reg_cache[i]);
+	lis3->regs_stored = true;
+}
+
+static inline void lis3_context_restore(struct lis3lv02d *lis3)
+{
+	int i;
+	if (lis3->regs_stored)
+		for (i = 0; i < lis3->regs_size; i++)
+			lis3->write(lis3, lis3->regs[i], lis3->reg_cache[i]);
+}
+
+void lis3lv02d_poweroff(struct lis3lv02d *lis3)
+{
+	if (lis3->reg_ctrl)
+		lis3_context_save(lis3);
+	/* disable X,Y,Z axis and power down */
+	lis3->write(lis3, CTRL_REG1, 0x00);
+	if (lis3->reg_ctrl)
+		lis3->reg_ctrl(lis3, LIS3_REG_OFF);
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
+
+void lis3lv02d_poweron(struct lis3lv02d *lis3)
+{
+	u8 reg;
+
+	lis3->init(lis3);
+
+	/*
+	 * Common configuration
+	 * BDU: (12 bits sensors only) LSB and MSB values are not updated until
+	 *      both have been read. So the value read will always be correct.
+	 * Set BOOT bit to refresh factory tuning values.
+	 */
+	lis3->read(lis3, CTRL_REG2, &reg);
+	if (lis3->whoami ==  WAI_12B)
+		reg |= CTRL2_BDU | CTRL2_BOOT;
+	else
+		reg |= CTRL2_BOOT_8B;
+	lis3->write(lis3, CTRL_REG2, reg);
+
+	/* LIS3 power on delay is quite long */
+	msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+	if (lis3->reg_ctrl)
+		lis3_context_restore(lis3);
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
+
+
+static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
+{
+	int x, y, z;
+
+	mutex_lock(&lis3_dev.mutex);
+	lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+	input_report_abs(pidev->input, ABS_X, x);
+	input_report_abs(pidev->input, ABS_Y, y);
+	input_report_abs(pidev->input, ABS_Z, z);
+	input_sync(pidev->input);
+	mutex_unlock(&lis3_dev.mutex);
+}
+
+static void lis3lv02d_joystick_open(struct input_polled_dev *pidev)
+{
+	if (lis3_dev.pm_dev)
+		pm_runtime_get_sync(lis3_dev.pm_dev);
+
+	if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev)
+		atomic_set(&lis3_dev.wake_thread, 1);
+	/*
+	 * Update coordinates for the case where poll interval is 0 and
+	 * the chip in running purely under interrupt control
+	 */
+	lis3lv02d_joystick_poll(pidev);
+}
+
+static void lis3lv02d_joystick_close(struct input_polled_dev *pidev)
+{
+	atomic_set(&lis3_dev.wake_thread, 0);
+	if (lis3_dev.pm_dev)
+		pm_runtime_put(lis3_dev.pm_dev);
+}
+
+static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+{
+	if (!test_bit(0, &lis3_dev.misc_opened))
+		goto out;
+
+	/*
+	 * Be careful: on some HP laptops the bios force DD when on battery and
+	 * the lid is closed. This leads to interrupts as soon as a little move
+	 * is done.
+	 */
+	atomic_inc(&lis3_dev.count);
+
+	wake_up_interruptible(&lis3_dev.misc_wait);
+	kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
+out:
+	if (atomic_read(&lis3_dev.wake_thread))
+		return IRQ_WAKE_THREAD;
+	return IRQ_HANDLED;
+}
+
+static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3)
+{
+	struct input_dev *dev = lis3->idev->input;
+	u8 click_src;
+
+	mutex_lock(&lis3->mutex);
+	lis3->read(lis3, CLICK_SRC, &click_src);
+
+	if (click_src & CLICK_SINGLE_X) {
+		input_report_key(dev, lis3->mapped_btns[0], 1);
+		input_report_key(dev, lis3->mapped_btns[0], 0);
+	}
+
+	if (click_src & CLICK_SINGLE_Y) {
+		input_report_key(dev, lis3->mapped_btns[1], 1);
+		input_report_key(dev, lis3->mapped_btns[1], 0);
+	}
+
+	if (click_src & CLICK_SINGLE_Z) {
+		input_report_key(dev, lis3->mapped_btns[2], 1);
+		input_report_key(dev, lis3->mapped_btns[2], 0);
+	}
+	input_sync(dev);
+	mutex_unlock(&lis3->mutex);
+}
+
+static inline void lis302dl_data_ready(struct lis3lv02d *lis3, int index)
+{
+	int dummy;
+
+	/* Dummy read to ack interrupt */
+	lis3lv02d_get_xyz(lis3, &dummy, &dummy, &dummy);
+	lis3->data_ready_count[index]++;
+}
+
+static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data)
+{
+	struct lis3lv02d *lis3 = data;
+	u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ1_MASK;
+
+	if (irq_cfg == LIS3_IRQ1_CLICK)
+		lis302dl_interrupt_handle_click(lis3);
+	else if (unlikely(irq_cfg == LIS3_IRQ1_DATA_READY))
+		lis302dl_data_ready(lis3, IRQ_LINE0);
+	else
+		lis3lv02d_joystick_poll(lis3->idev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data)
+{
+	struct lis3lv02d *lis3 = data;
+	u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ2_MASK;
+
+	if (irq_cfg == LIS3_IRQ2_CLICK)
+		lis302dl_interrupt_handle_click(lis3);
+	else if (unlikely(irq_cfg == LIS3_IRQ2_DATA_READY))
+		lis302dl_data_ready(lis3, IRQ_LINE1);
+	else
+		lis3lv02d_joystick_poll(lis3->idev);
+
+	return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &lis3_dev.misc_opened))
+		return -EBUSY; /* already open */
+
+	if (lis3_dev.pm_dev)
+		pm_runtime_get_sync(lis3_dev.pm_dev);
+
+	atomic_set(&lis3_dev.count, 0);
+	return 0;
+}
+
+static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+{
+	fasync_helper(-1, file, 0, &lis3_dev.async_queue);
+	clear_bit(0, &lis3_dev.misc_opened); /* release the device */
+	if (lis3_dev.pm_dev)
+		pm_runtime_put(lis3_dev.pm_dev);
+	return 0;
+}
+
+static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+				size_t count, loff_t *pos)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	u32 data;
+	unsigned char byte_data;
+	ssize_t retval = 1;
+
+	if (count < 1)
+		return -EINVAL;
+
+	add_wait_queue(&lis3_dev.misc_wait, &wait);
+	while (true) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		data = atomic_xchg(&lis3_dev.count, 0);
+		if (data)
+			break;
+
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto out;
+		}
+
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			goto out;
+		}
+
+		schedule();
+	}
+
+	if (data < 255)
+		byte_data = data;
+	else
+		byte_data = 255;
+
+	/* make sure we are not going into copy_to_user() with
+	 * TASK_INTERRUPTIBLE state */
+	set_current_state(TASK_RUNNING);
+	if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+		retval = -EFAULT;
+
+out:
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&lis3_dev.misc_wait, &wait);
+
+	return retval;
+}
+
+static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &lis3_dev.misc_wait, wait);
+	if (atomic_read(&lis3_dev.count))
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+{
+	return fasync_helper(fd, file, on, &lis3_dev.async_queue);
+}
+
+static const struct file_operations lis3lv02d_misc_fops = {
+	.owner   = THIS_MODULE,
+	.llseek  = no_llseek,
+	.read    = lis3lv02d_misc_read,
+	.open    = lis3lv02d_misc_open,
+	.release = lis3lv02d_misc_release,
+	.poll    = lis3lv02d_misc_poll,
+	.fasync  = lis3lv02d_misc_fasync,
+};
+
+static struct miscdevice lis3lv02d_misc_device = {
+	.minor   = MISC_DYNAMIC_MINOR,
+	.name    = "freefall",
+	.fops    = &lis3lv02d_misc_fops,
+};
+
+int lis3lv02d_joystick_enable(void)
+{
+	struct input_dev *input_dev;
+	int err;
+	int max_val, fuzz, flat;
+	int btns[] = {BTN_X, BTN_Y, BTN_Z};
+
+	if (lis3_dev.idev)
+		return -EINVAL;
+
+	lis3_dev.idev = input_allocate_polled_device();
+	if (!lis3_dev.idev)
+		return -ENOMEM;
+
+	lis3_dev.idev->poll = lis3lv02d_joystick_poll;
+	lis3_dev.idev->open = lis3lv02d_joystick_open;
+	lis3_dev.idev->close = lis3lv02d_joystick_close;
+	lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
+	lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN;
+	lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX;
+	input_dev = lis3_dev.idev->input;
+
+	input_dev->name       = "ST LIS3LV02DL Accelerometer";
+	input_dev->phys       = DRIVER_NAME "/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor  = 0;
+	input_dev->dev.parent = &lis3_dev.pdev->dev;
+
+	set_bit(EV_ABS, input_dev->evbit);
+	max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY;
+	if (lis3_dev.whoami == WAI_12B) {
+		fuzz = LIS3_DEFAULT_FUZZ_12B;
+		flat = LIS3_DEFAULT_FLAT_12B;
+	} else {
+		fuzz = LIS3_DEFAULT_FUZZ_8B;
+		flat = LIS3_DEFAULT_FLAT_8B;
+	}
+	fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY;
+	flat = (flat * lis3_dev.scale) / LIS3_ACCURACY;
+
+	input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat);
+	input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat);
+	input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat);
+
+	lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns);
+	lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns);
+	lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns);
+
+	err = input_register_polled_device(lis3_dev.idev);
+	if (err) {
+		input_free_polled_device(lis3_dev.idev);
+		lis3_dev.idev = NULL;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable);
+
+void lis3lv02d_joystick_disable(void)
+{
+	if (lis3_dev.irq)
+		free_irq(lis3_dev.irq, &lis3_dev);
+	if (lis3_dev.pdata && lis3_dev.pdata->irq2)
+		free_irq(lis3_dev.pdata->irq2, &lis3_dev);
+
+	if (!lis3_dev.idev)
+		return;
+
+	if (lis3_dev.irq)
+		misc_deregister(&lis3lv02d_misc_device);
+	input_unregister_polled_device(lis3_dev.idev);
+	input_free_polled_device(lis3_dev.idev);
+	lis3_dev.idev = NULL;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
+
+/* Sysfs stuff */
+static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3)
+{
+	/*
+	 * SYSFS functions are fast visitors so put-call
+	 * immediately after the get-call. However, keep
+	 * chip running for a while and schedule delayed
+	 * suspend. This way periodic sysfs calls doesn't
+	 * suffer from relatively long power up time.
+	 */
+
+	if (lis3->pm_dev) {
+		pm_runtime_get_sync(lis3->pm_dev);
+		pm_runtime_put_noidle(lis3->pm_dev);
+		pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY);
+	}
+}
+
+static ssize_t lis3lv02d_selftest_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	s16 values[3];
+
+	static const char ok[] = "OK";
+	static const char fail[] = "FAIL";
+	static const char irq[] = "FAIL_IRQ";
+	const char *res;
+
+	lis3lv02d_sysfs_poweron(&lis3_dev);
+	switch (lis3lv02d_selftest(&lis3_dev, values)) {
+	case SELFTEST_FAIL:
+		res = fail;
+		break;
+	case SELFTEST_IRQ:
+		res = irq;
+		break;
+	case SELFTEST_OK:
+	default:
+		res = ok;
+		break;
+	}
+	return sprintf(buf, "%s %d %d %d\n", res,
+		values[0], values[1], values[2]);
+}
+
+static ssize_t lis3lv02d_position_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int x, y, z;
+
+	lis3lv02d_sysfs_poweron(&lis3_dev);
+	mutex_lock(&lis3_dev.mutex);
+	lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+	mutex_unlock(&lis3_dev.mutex);
+	return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
+}
+
+static ssize_t lis3lv02d_rate_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	lis3lv02d_sysfs_poweron(&lis3_dev);
+	return sprintf(buf, "%d\n", lis3lv02d_get_odr());
+}
+
+static ssize_t lis3lv02d_rate_set(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	unsigned long rate;
+
+	if (strict_strtoul(buf, 0, &rate))
+		return -EINVAL;
+
+	lis3lv02d_sysfs_poweron(&lis3_dev);
+	if (lis3lv02d_set_odr(rate))
+		return -EINVAL;
+
+	return count;
+}
+
+static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL);
+static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
+static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show,
+					    lis3lv02d_rate_set);
+
+static struct attribute *lis3lv02d_attributes[] = {
+	&dev_attr_selftest.attr,
+	&dev_attr_position.attr,
+	&dev_attr_rate.attr,
+	NULL
+};
+
+static struct attribute_group lis3lv02d_attribute_group = {
+	.attrs = lis3lv02d_attributes
+};
+
+
+static int lis3lv02d_add_fs(struct lis3lv02d *lis3)
+{
+	lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+	if (IS_ERR(lis3->pdev))
+		return PTR_ERR(lis3->pdev);
+
+	return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
+}
+
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3)
+{
+	sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
+	platform_device_unregister(lis3->pdev);
+	if (lis3->pm_dev) {
+		/* Barrier after the sysfs remove */
+		pm_runtime_barrier(lis3->pm_dev);
+
+		/* SYSFS may have left chip running. Turn off if necessary */
+		if (!pm_runtime_suspended(lis3->pm_dev))
+			lis3lv02d_poweroff(&lis3_dev);
+
+		pm_runtime_disable(lis3->pm_dev);
+		pm_runtime_set_suspended(lis3->pm_dev);
+	}
+	kfree(lis3->reg_cache);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
+
+static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
+				struct lis3lv02d_platform_data *p)
+{
+	int err;
+	int ctrl2 = p->hipass_ctrl;
+
+	if (p->click_flags) {
+		dev->write(dev, CLICK_CFG, p->click_flags);
+		dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit);
+		dev->write(dev, CLICK_LATENCY, p->click_latency);
+		dev->write(dev, CLICK_WINDOW, p->click_window);
+		dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf);
+		dev->write(dev, CLICK_THSY_X,
+			(p->click_thresh_x & 0xf) |
+			(p->click_thresh_y << 4));
+
+		if (dev->idev) {
+			struct input_dev *input_dev = lis3_dev.idev->input;
+			input_set_capability(input_dev, EV_KEY, BTN_X);
+			input_set_capability(input_dev, EV_KEY, BTN_Y);
+			input_set_capability(input_dev, EV_KEY, BTN_Z);
+		}
+	}
+
+	if (p->wakeup_flags) {
+		dev->write(dev, FF_WU_CFG_1, p->wakeup_flags);
+		dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f);
+		/* pdata value + 1 to keep this backward compatible*/
+		dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1);
+		ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/
+	}
+
+	if (p->wakeup_flags2) {
+		dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2);
+		dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f);
+		/* pdata value + 1 to keep this backward compatible*/
+		dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1);
+		ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/
+	}
+	/* Configure hipass filters */
+	dev->write(dev, CTRL_REG2, ctrl2);
+
+	if (p->irq2) {
+		err = request_threaded_irq(p->irq2,
+					NULL,
+					lis302dl_interrupt_thread2_8b,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT |
+					(p->irq_flags2 & IRQF_TRIGGER_MASK),
+					DRIVER_NAME, &lis3_dev);
+		if (err < 0)
+			pr_err("No second IRQ. Limited functionality\n");
+	}
+}
+
+/*
+ * Initialise the accelerometer and the various subsystems.
+ * Should be rather independent of the bus system.
+ */
+int lis3lv02d_init_device(struct lis3lv02d *dev)
+{
+	int err;
+	irq_handler_t thread_fn;
+	int irq_flags = 0;
+
+	dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
+
+	switch (dev->whoami) {
+	case WAI_12B:
+		pr_info("12 bits sensor found\n");
+		dev->read_data = lis3lv02d_read_12;
+		dev->mdps_max_val = 2048;
+		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
+		dev->odrs = lis3_12_rates;
+		dev->odr_mask = CTRL1_DF0 | CTRL1_DF1;
+		dev->scale = LIS3_SENSITIVITY_12B;
+		dev->regs = lis3_wai12_regs;
+		dev->regs_size = ARRAY_SIZE(lis3_wai12_regs);
+		break;
+	case WAI_8B:
+		pr_info("8 bits sensor found\n");
+		dev->read_data = lis3lv02d_read_8;
+		dev->mdps_max_val = 128;
+		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+		dev->odrs = lis3_8_rates;
+		dev->odr_mask = CTRL1_DR;
+		dev->scale = LIS3_SENSITIVITY_8B;
+		dev->regs = lis3_wai8_regs;
+		dev->regs_size = ARRAY_SIZE(lis3_wai8_regs);
+		break;
+	case WAI_3DC:
+		pr_info("8 bits 3DC sensor found\n");
+		dev->read_data = lis3lv02d_read_8;
+		dev->mdps_max_val = 128;
+		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+		dev->odrs = lis3_3dc_rates;
+		dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
+		dev->scale = LIS3_SENSITIVITY_8B;
+		break;
+	default:
+		pr_err("unknown sensor type 0x%X\n", dev->whoami);
+		return -EINVAL;
+	}
+
+	dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs),
+				     sizeof(lis3_wai12_regs)), GFP_KERNEL);
+
+	if (dev->reg_cache == NULL) {
+		printk(KERN_ERR DRIVER_NAME "out of memory\n");
+		return -ENOMEM;
+	}
+
+	mutex_init(&dev->mutex);
+	atomic_set(&dev->wake_thread, 0);
+
+	lis3lv02d_add_fs(dev);
+	lis3lv02d_poweron(dev);
+
+	if (dev->pm_dev) {
+		pm_runtime_set_active(dev->pm_dev);
+		pm_runtime_enable(dev->pm_dev);
+	}
+
+	if (lis3lv02d_joystick_enable())
+		pr_err("joystick initialization failed\n");
+
+	/* passing in platform specific data is purely optional and only
+	 * used by the SPI transport layer at the moment */
+	if (dev->pdata) {
+		struct lis3lv02d_platform_data *p = dev->pdata;
+
+		if (dev->whoami == WAI_8B)
+			lis3lv02d_8b_configure(dev, p);
+
+		irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK;
+
+		dev->irq_cfg = p->irq_cfg;
+		if (p->irq_cfg)
+			dev->write(dev, CTRL_REG3, p->irq_cfg);
+
+		if (p->default_rate)
+			lis3lv02d_set_odr(p->default_rate);
+	}
+
+	/* bail if we did not get an IRQ from the bus layer */
+	if (!dev->irq) {
+		pr_debug("No IRQ. Disabling /dev/freefall\n");
+		goto out;
+	}
+
+	/*
+	 * The sensor can generate interrupts for free-fall and direction
+	 * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+	 * the things simple and _fast_ we activate it only for free-fall, so
+	 * no need to read register (very slow with ACPI). For the same reason,
+	 * we forbid shared interrupts.
+	 *
+	 * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+	 * io-apic is not configurable (and generates a warning) but I keep it
+	 * in case of support for other hardware.
+	 */
+	if (dev->pdata && dev->whoami == WAI_8B)
+		thread_fn = lis302dl_interrupt_thread1_8b;
+	else
+		thread_fn = NULL;
+
+	err = request_threaded_irq(dev->irq, lis302dl_interrupt,
+				thread_fn,
+				IRQF_TRIGGER_RISING | IRQF_ONESHOT |
+				irq_flags,
+				DRIVER_NAME, &lis3_dev);
+
+	if (err < 0) {
+		pr_err("Cannot get IRQ\n");
+		goto out;
+	}
+
+	if (misc_register(&lis3lv02d_misc_device))
+		pr_err("misc_register failed\n");
+out:
+	return 0;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_init_device);
+
+MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
+MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
new file mode 100644
index 000000000000..a1939589eb2c
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -0,0 +1,291 @@
+/*
+ *  lis3lv02d.h - ST LIS3LV02DL accelerometer driver
+ *
+ *  Copyright (C) 2007-2008 Yan Burman
+ *  Copyright (C) 2008-2009 Eric Piel
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/platform_device.h>
+#include <linux/input-polldev.h>
+#include <linux/regulator/consumer.h>
+
+/*
+ * This driver tries to support the "digital" accelerometer chips from
+ * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL,
+ * LIS35DE, or LIS202DL. They are very similar in terms of programming, with
+ * almost the same registers. In addition to differing on physical properties,
+ * they differ on the number of axes (2/3), precision (8/12 bits), and special
+ * features (freefall detection, click...). Unfortunately, not all the
+ * differences can be probed via a register.
+ * They can be connected either via I²C or SPI.
+ */
+
+#include <linux/lis3lv02d.h>
+
+enum lis3_reg {
+	WHO_AM_I	= 0x0F,
+	OFFSET_X	= 0x16,
+	OFFSET_Y	= 0x17,
+	OFFSET_Z	= 0x18,
+	GAIN_X		= 0x19,
+	GAIN_Y		= 0x1A,
+	GAIN_Z		= 0x1B,
+	CTRL_REG1	= 0x20,
+	CTRL_REG2	= 0x21,
+	CTRL_REG3	= 0x22,
+	CTRL_REG4	= 0x23,
+	HP_FILTER_RESET	= 0x23,
+	STATUS_REG	= 0x27,
+	OUTX_L		= 0x28,
+	OUTX_H		= 0x29,
+	OUTX		= 0x29,
+	OUTY_L		= 0x2A,
+	OUTY_H		= 0x2B,
+	OUTY		= 0x2B,
+	OUTZ_L		= 0x2C,
+	OUTZ_H		= 0x2D,
+	OUTZ		= 0x2D,
+};
+
+enum lis302d_reg {
+	FF_WU_CFG_1	= 0x30,
+	FF_WU_SRC_1	= 0x31,
+	FF_WU_THS_1	= 0x32,
+	FF_WU_DURATION_1 = 0x33,
+	FF_WU_CFG_2	= 0x34,
+	FF_WU_SRC_2	= 0x35,
+	FF_WU_THS_2	= 0x36,
+	FF_WU_DURATION_2 = 0x37,
+	CLICK_CFG	= 0x38,
+	CLICK_SRC	= 0x39,
+	CLICK_THSY_X	= 0x3B,
+	CLICK_THSZ	= 0x3C,
+	CLICK_TIMELIMIT	= 0x3D,
+	CLICK_LATENCY	= 0x3E,
+	CLICK_WINDOW	= 0x3F,
+};
+
+enum lis3lv02d_reg {
+	FF_WU_CFG	= 0x30,
+	FF_WU_SRC	= 0x31,
+	FF_WU_ACK	= 0x32,
+	FF_WU_THS_L	= 0x34,
+	FF_WU_THS_H	= 0x35,
+	FF_WU_DURATION	= 0x36,
+	DD_CFG		= 0x38,
+	DD_SRC		= 0x39,
+	DD_ACK		= 0x3A,
+	DD_THSI_L	= 0x3C,
+	DD_THSI_H	= 0x3D,
+	DD_THSE_L	= 0x3E,
+	DD_THSE_H	= 0x3F,
+};
+
+enum lis3_who_am_i {
+	WAI_3DC		= 0x33,	/* 8 bits: LIS3DC, HP3DC */
+	WAI_12B		= 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
+	WAI_8B		= 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
+	WAI_6B		= 0x52, /* 6 bits: LIS331DLF - not supported */
+};
+
+enum lis3lv02d_ctrl1_12b {
+	CTRL1_Xen	= 0x01,
+	CTRL1_Yen	= 0x02,
+	CTRL1_Zen	= 0x04,
+	CTRL1_ST	= 0x08,
+	CTRL1_DF0	= 0x10,
+	CTRL1_DF1	= 0x20,
+	CTRL1_PD0	= 0x40,
+	CTRL1_PD1	= 0x80,
+};
+
+/* Delta to ctrl1_12b version */
+enum lis3lv02d_ctrl1_8b {
+	CTRL1_STM	= 0x08,
+	CTRL1_STP	= 0x10,
+	CTRL1_FS	= 0x20,
+	CTRL1_PD	= 0x40,
+	CTRL1_DR	= 0x80,
+};
+
+enum lis3lv02d_ctrl1_3dc {
+	CTRL1_ODR0	= 0x10,
+	CTRL1_ODR1	= 0x20,
+	CTRL1_ODR2	= 0x40,
+	CTRL1_ODR3	= 0x80,
+};
+
+enum lis3lv02d_ctrl2 {
+	CTRL2_DAS	= 0x01,
+	CTRL2_SIM	= 0x02,
+	CTRL2_DRDY	= 0x04,
+	CTRL2_IEN	= 0x08,
+	CTRL2_BOOT	= 0x10,
+	CTRL2_BLE	= 0x20,
+	CTRL2_BDU	= 0x40, /* Block Data Update */
+	CTRL2_FS	= 0x80, /* Full Scale selection */
+};
+
+enum lis3lv02d_ctrl4_3dc {
+	CTRL4_SIM	= 0x01,
+	CTRL4_ST0	= 0x02,
+	CTRL4_ST1	= 0x04,
+	CTRL4_FS0	= 0x10,
+	CTRL4_FS1	= 0x20,
+};
+
+enum lis302d_ctrl2 {
+	HP_FF_WU2	= 0x08,
+	HP_FF_WU1	= 0x04,
+	CTRL2_BOOT_8B   = 0x40,
+};
+
+enum lis3lv02d_ctrl3 {
+	CTRL3_CFS0	= 0x01,
+	CTRL3_CFS1	= 0x02,
+	CTRL3_FDS	= 0x10,
+	CTRL3_HPFF	= 0x20,
+	CTRL3_HPDD	= 0x40,
+	CTRL3_ECK	= 0x80,
+};
+
+enum lis3lv02d_status_reg {
+	STATUS_XDA	= 0x01,
+	STATUS_YDA	= 0x02,
+	STATUS_ZDA	= 0x04,
+	STATUS_XYZDA	= 0x08,
+	STATUS_XOR	= 0x10,
+	STATUS_YOR	= 0x20,
+	STATUS_ZOR	= 0x40,
+	STATUS_XYZOR	= 0x80,
+};
+
+enum lis3lv02d_ff_wu_cfg {
+	FF_WU_CFG_XLIE	= 0x01,
+	FF_WU_CFG_XHIE	= 0x02,
+	FF_WU_CFG_YLIE	= 0x04,
+	FF_WU_CFG_YHIE	= 0x08,
+	FF_WU_CFG_ZLIE	= 0x10,
+	FF_WU_CFG_ZHIE	= 0x20,
+	FF_WU_CFG_LIR	= 0x40,
+	FF_WU_CFG_AOI	= 0x80,
+};
+
+enum lis3lv02d_ff_wu_src {
+	FF_WU_SRC_XL	= 0x01,
+	FF_WU_SRC_XH	= 0x02,
+	FF_WU_SRC_YL	= 0x04,
+	FF_WU_SRC_YH	= 0x08,
+	FF_WU_SRC_ZL	= 0x10,
+	FF_WU_SRC_ZH	= 0x20,
+	FF_WU_SRC_IA	= 0x40,
+};
+
+enum lis3lv02d_dd_cfg {
+	DD_CFG_XLIE	= 0x01,
+	DD_CFG_XHIE	= 0x02,
+	DD_CFG_YLIE	= 0x04,
+	DD_CFG_YHIE	= 0x08,
+	DD_CFG_ZLIE	= 0x10,
+	DD_CFG_ZHIE	= 0x20,
+	DD_CFG_LIR	= 0x40,
+	DD_CFG_IEND	= 0x80,
+};
+
+enum lis3lv02d_dd_src {
+	DD_SRC_XL	= 0x01,
+	DD_SRC_XH	= 0x02,
+	DD_SRC_YL	= 0x04,
+	DD_SRC_YH	= 0x08,
+	DD_SRC_ZL	= 0x10,
+	DD_SRC_ZH	= 0x20,
+	DD_SRC_IA	= 0x40,
+};
+
+enum lis3lv02d_click_src_8b {
+	CLICK_SINGLE_X	= 0x01,
+	CLICK_DOUBLE_X	= 0x02,
+	CLICK_SINGLE_Y	= 0x04,
+	CLICK_DOUBLE_Y	= 0x08,
+	CLICK_SINGLE_Z	= 0x10,
+	CLICK_DOUBLE_Z	= 0x20,
+	CLICK_IA	= 0x40,
+};
+
+enum lis3lv02d_reg_state {
+	LIS3_REG_OFF	= 0x00,
+	LIS3_REG_ON	= 0x01,
+};
+
+union axis_conversion {
+	struct {
+		int x, y, z;
+	};
+	int as_array[3];
+
+};
+
+struct lis3lv02d {
+	void			*bus_priv; /* used by the bus layer only */
+	struct device		*pm_dev; /* for pm_runtime purposes */
+	int (*init) (struct lis3lv02d *lis3);
+	int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
+	int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
+	int (*blkread) (struct lis3lv02d *lis3, int reg, int len, u8 *ret);
+	int (*reg_ctrl) (struct lis3lv02d *lis3, bool state);
+
+	int                     *odrs;     /* Supported output data rates */
+	u8			*regs;	   /* Regs to store / restore */
+	int			regs_size;
+	u8                      *reg_cache;
+	bool			regs_stored;
+	u8                      odr_mask;  /* ODR bit mask */
+	u8			whoami;    /* indicates measurement precision */
+	s16 (*read_data) (struct lis3lv02d *lis3, int reg);
+	int			mdps_max_val;
+	int			pwron_delay;
+	int                     scale; /*
+					* relationship between 1 LBS and mG
+					* (1/1000th of earth gravity)
+					*/
+
+	struct input_polled_dev	*idev;     /* input device */
+	struct platform_device	*pdev;     /* platform device */
+	struct regulator_bulk_data regulators[2];
+	atomic_t		count;     /* interrupt count after last read */
+	union axis_conversion	ac;        /* hw -> logical axis */
+	int			mapped_btns[3];
+
+	u32			irq;       /* IRQ number */
+	struct fasync_struct	*async_queue; /* queue for the misc device */
+	wait_queue_head_t	misc_wait; /* Wait queue for the misc device */
+	unsigned long		misc_opened; /* bit0: whether the device is open */
+	int                     data_ready_count[2];
+	atomic_t		wake_thread;
+	unsigned char           irq_cfg;
+
+	struct lis3lv02d_platform_data *pdata;	/* for passing board config */
+	struct mutex		mutex;     /* Serialize poll and selftest */
+};
+
+int lis3lv02d_init_device(struct lis3lv02d *lis3);
+int lis3lv02d_joystick_enable(void);
+void lis3lv02d_joystick_disable(void);
+void lis3lv02d_poweroff(struct lis3lv02d *lis3);
+void lis3lv02d_poweron(struct lis3lv02d *lis3);
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
+
+extern struct lis3lv02d lis3_dev;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
new file mode 100644
index 000000000000..b20dfb4522d2
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -0,0 +1,279 @@
+/*
+ * drivers/hwmon/lis3lv02d_i2c.c
+ *
+ * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
+ * Driver is based on corresponding SPI driver written by Daniel Mack
+ * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ).
+ *
+ * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include "lis3lv02d.h"
+
+#define DRV_NAME	"lis3lv02d_i2c"
+
+static const char reg_vdd[]    = "Vdd";
+static const char reg_vdd_io[] = "Vdd_IO";
+
+static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state)
+{
+	int ret;
+	if (state == LIS3_REG_OFF) {
+		ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators),
+					lis3->regulators);
+	} else {
+		ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators),
+					lis3->regulators);
+		/* Chip needs time to wakeup. Not mentioned in datasheet */
+		usleep_range(10000, 20000);
+	}
+	return ret;
+}
+
+static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
+{
+	struct i2c_client *c = lis3->bus_priv;
+	return i2c_smbus_write_byte_data(c, reg, value);
+}
+
+static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
+{
+	struct i2c_client *c = lis3->bus_priv;
+	*v = i2c_smbus_read_byte_data(c, reg);
+	return 0;
+}
+
+static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len,
+				u8 *v)
+{
+	struct i2c_client *c = lis3->bus_priv;
+	reg |= (1 << 7); /* 7th bit enables address auto incrementation */
+	return i2c_smbus_read_i2c_block_data(c, reg, len, v);
+}
+
+static int lis3_i2c_init(struct lis3lv02d *lis3)
+{
+	u8 reg;
+	int ret;
+
+	if (lis3->reg_ctrl)
+		lis3_reg_ctrl(lis3, LIS3_REG_ON);
+
+	lis3->read(lis3, WHO_AM_I, &reg);
+	if (reg != lis3->whoami)
+		printk(KERN_ERR "lis3: power on failure\n");
+
+	/* power up the device */
+	ret = lis3->read(lis3, CTRL_REG1, &reg);
+	if (ret < 0)
+		return ret;
+
+	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
+	return lis3->write(lis3, CTRL_REG1, reg);
+}
+
+/* Default axis mapping but it can be overwritten by platform data */
+static union axis_conversion lis3lv02d_axis_map =
+	{ .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } };
+
+static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	int ret = 0;
+	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
+
+	if (pdata) {
+		/* Regulator control is optional */
+		if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL)
+			lis3_dev.reg_ctrl = lis3_reg_ctrl;
+
+		if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
+			(i2c_check_functionality(client->adapter,
+						I2C_FUNC_SMBUS_I2C_BLOCK)))
+			lis3_dev.blkread  = lis3_i2c_blockread;
+
+		if (pdata->axis_x)
+			lis3lv02d_axis_map.x = pdata->axis_x;
+
+		if (pdata->axis_y)
+			lis3lv02d_axis_map.y = pdata->axis_y;
+
+		if (pdata->axis_z)
+			lis3lv02d_axis_map.z = pdata->axis_z;
+
+		if (pdata->setup_resources)
+			ret = pdata->setup_resources();
+
+		if (ret)
+			goto fail;
+	}
+
+	if (lis3_dev.reg_ctrl) {
+		lis3_dev.regulators[0].supply = reg_vdd;
+		lis3_dev.regulators[1].supply = reg_vdd_io;
+		ret = regulator_bulk_get(&client->dev,
+					ARRAY_SIZE(lis3_dev.regulators),
+					lis3_dev.regulators);
+		if (ret < 0)
+			goto fail;
+	}
+
+	lis3_dev.pdata	  = pdata;
+	lis3_dev.bus_priv = client;
+	lis3_dev.init	  = lis3_i2c_init;
+	lis3_dev.read	  = lis3_i2c_read;
+	lis3_dev.write	  = lis3_i2c_write;
+	lis3_dev.irq	  = client->irq;
+	lis3_dev.ac	  = lis3lv02d_axis_map;
+	lis3_dev.pm_dev	  = &client->dev;
+
+	i2c_set_clientdata(client, &lis3_dev);
+
+	/* Provide power over the init call */
+	if (lis3_dev.reg_ctrl)
+		lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
+
+	ret = lis3lv02d_init_device(&lis3_dev);
+
+	if (lis3_dev.reg_ctrl)
+		lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
+
+	if (ret == 0)
+		return 0;
+fail:
+	if (pdata && pdata->release_resources)
+		pdata->release_resources();
+	return ret;
+}
+
+static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
+{
+	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
+
+	if (pdata && pdata->release_resources)
+		pdata->release_resources();
+
+	lis3lv02d_joystick_disable();
+	lis3lv02d_remove_fs(&lis3_dev);
+
+	if (lis3_dev.reg_ctrl)
+		regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
+				lis3_dev.regulators);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lis3lv02d_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+		lis3lv02d_poweroff(lis3);
+	return 0;
+}
+
+static int lis3lv02d_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+	/*
+	 * pm_runtime documentation says that devices should always
+	 * be powered on at resume. Pm_runtime turns them off after system
+	 * wide resume is complete.
+	 */
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
+		pm_runtime_suspended(dev))
+		lis3lv02d_poweron(lis3);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_RUNTIME
+static int lis3_i2c_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+	lis3lv02d_poweroff(lis3);
+	return 0;
+}
+
+static int lis3_i2c_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+	lis3lv02d_poweron(lis3);
+	return 0;
+}
+#endif /* CONFIG_PM_RUNTIME */
+
+static const struct i2c_device_id lis3lv02d_id[] = {
+	{"lis3lv02d", 0 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
+
+static const struct dev_pm_ops lis3_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
+				lis3lv02d_i2c_resume)
+	SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
+			   lis3_i2c_runtime_resume,
+			   NULL)
+};
+
+static struct i2c_driver lis3lv02d_i2c_driver = {
+	.driver	 = {
+		.name   = DRV_NAME,
+		.owner  = THIS_MODULE,
+		.pm     = &lis3_pm_ops,
+	},
+	.probe	= lis3lv02d_i2c_probe,
+	.remove	= __devexit_p(lis3lv02d_i2c_remove),
+	.id_table = lis3lv02d_id,
+};
+
+static int __init lis3lv02d_init(void)
+{
+	return i2c_add_driver(&lis3lv02d_i2c_driver);
+}
+
+static void __exit lis3lv02d_exit(void)
+{
+	i2c_del_driver(&lis3lv02d_i2c_driver);
+}
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("lis3lv02d I2C interface");
+MODULE_LICENSE("GPL");
+
+module_init(lis3lv02d_init);
+module_exit(lis3lv02d_exit);
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
new file mode 100644
index 000000000000..c1f8a8fbf694
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -0,0 +1,145 @@
+/*
+ * lis3lv02d_spi - SPI glue layer for lis3lv02d
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+#include <linux/pm.h>
+
+#include "lis3lv02d.h"
+
+#define DRV_NAME 	"lis3lv02d_spi"
+#define LIS3_SPI_READ	0x80
+
+static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v)
+{
+	struct spi_device *spi = lis3->bus_priv;
+	int ret = spi_w8r8(spi, reg | LIS3_SPI_READ);
+	if (ret < 0)
+		return -EINVAL;
+
+	*v = (u8) ret;
+	return 0;
+}
+
+static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val)
+{
+	u8 tmp[2] = { reg, val };
+	struct spi_device *spi = lis3->bus_priv;
+	return spi_write(spi, tmp, sizeof(tmp));
+}
+
+static int lis3_spi_init(struct lis3lv02d *lis3)
+{
+	u8 reg;
+	int ret;
+
+	/* power up the device */
+	ret = lis3->read(lis3, CTRL_REG1, &reg);
+	if (ret < 0)
+		return ret;
+
+	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
+	return lis3->write(lis3, CTRL_REG1, reg);
+}
+
+static union axis_conversion lis3lv02d_axis_normal =
+	{ .as_array = { 1, 2, 3 } };
+
+static int __devinit lis302dl_spi_probe(struct spi_device *spi)
+{
+	int ret;
+
+	spi->bits_per_word = 8;
+	spi->mode = SPI_MODE_0;
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return ret;
+
+	lis3_dev.bus_priv	= spi;
+	lis3_dev.init		= lis3_spi_init;
+	lis3_dev.read		= lis3_spi_read;
+	lis3_dev.write		= lis3_spi_write;
+	lis3_dev.irq		= spi->irq;
+	lis3_dev.ac		= lis3lv02d_axis_normal;
+	lis3_dev.pdata		= spi->dev.platform_data;
+	spi_set_drvdata(spi, &lis3_dev);
+
+	return lis3lv02d_init_device(&lis3_dev);
+}
+
+static int __devexit lis302dl_spi_remove(struct spi_device *spi)
+{
+	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+	lis3lv02d_joystick_disable();
+	lis3lv02d_poweroff(lis3);
+
+	return lis3lv02d_remove_fs(&lis3_dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lis3lv02d_spi_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+		lis3lv02d_poweroff(&lis3_dev);
+
+	return 0;
+}
+
+static int lis3lv02d_spi_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+		lis3lv02d_poweron(lis3);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lis3lv02d_spi_pm, lis3lv02d_spi_suspend,
+			 lis3lv02d_spi_resume);
+
+static struct spi_driver lis302dl_spi_driver = {
+	.driver	 = {
+		.name   = DRV_NAME,
+		.owner  = THIS_MODULE,
+		.pm	= &lis3lv02d_spi_pm,
+	},
+	.probe	= lis302dl_spi_probe,
+	.remove	= __devexit_p(lis302dl_spi_remove),
+};
+
+static int __init lis302dl_init(void)
+{
+	return spi_register_driver(&lis302dl_spi_driver);
+}
+
+static void __exit lis302dl_exit(void)
+{
+	spi_unregister_driver(&lis302dl_spi_driver);
+}
+
+module_init(lis302dl_init);
+module_exit(lis302dl_exit);
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("lis3lv02d SPI glue layer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 380ba806495d..a19cb710a246 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -735,6 +735,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = {
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2,  },
 	{ }
 };
+MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
 
 static struct pci_driver pch_phub_driver = {
 	.name = "pch_phub",
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
index 7c4c306dfa8a..0003a1d56f7f 100644
--- a/drivers/misc/sgi-gru/Makefile
+++ b/drivers/misc/sgi-gru/Makefile
@@ -1,6 +1,4 @@
-ifdef CONFIG_SGI_GRU_DEBUG
-  EXTRA_CFLAGS	+= -DDEBUG
-endif
+ccflags-$(CONFIG_SGI_GRU_DEBUG)	:= -DDEBUG
 
 obj-$(CONFIG_SGI_GRU) := gru.o
 gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o gruhandles.o grukdump.o
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 28852dfa310d..ecafa4ba238b 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -348,15 +348,15 @@ static unsigned long gru_chiplet_cpu_to_mmr(int chiplet, int cpu, int *corep)
 
 static int gru_irq_count[GRU_CHIPLETS_PER_BLADE];
 
-static void gru_noop(unsigned int irq)
+static void gru_noop(struct irq_data *d)
 {
 }
 
 static struct irq_chip gru_chip[GRU_CHIPLETS_PER_BLADE] = {
 	[0 ... GRU_CHIPLETS_PER_BLADE - 1] {
-		.mask		= gru_noop,
-		.unmask		= gru_noop,
-		.ack		= gru_noop
+		.irq_mask	= gru_noop,
+		.irq_unmask	= gru_noop,
+		.irq_ack	= gru_noop
 	}
 };
 
@@ -373,7 +373,7 @@ static int gru_chiplet_setup_tlb_irq(int chiplet, char *irq_name,
 
 	if (gru_irq_count[chiplet] == 0) {
 		gru_chip[chiplet].name = irq_name;
-		ret = set_irq_chip(irq, &gru_chip[chiplet]);
+		ret = irq_set_chip(irq, &gru_chip[chiplet]);
 		if (ret) {
 			printk(KERN_ERR "%s: set_irq_chip failed, errno=%d\n",
 			       GRU_DRIVER_ID_STR, -ret);
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 34749ee88dfa..9e9bddaa95ae 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -229,7 +229,7 @@ again:
 	bid = blade_id < 0 ? uv_numa_blade_id() : blade_id;
 	bs = gru_base[bid];
 
-	/* Handle the case where migration occured while waiting for the sema */
+	/* Handle the case where migration occurred while waiting for the sema */
 	down_read(&bs->bs_kgts_sema);
 	if (blade_id < 0 && bid != uv_numa_blade_id()) {
 		up_read(&bs->bs_kgts_sema);
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 7a8b9068ea03..5c3ce2459675 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -379,7 +379,7 @@ struct gru_thread_state {
 						   required for contest */
 	char			ts_cch_req_slice;/* CCH packet slice */
 	char			ts_blade;	/* If >= 0, migrate context if
-						   ref from diferent blade */
+						   ref from different blade */
 	char			ts_force_cch_reload;
 	char			ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
 							  allocated CB */
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 000000000000..ec3b8c911833
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,908 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand<pratyush.anand@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pci_regs.h>
+#include <linux/configfs.h>
+#include <mach/pcie.h>
+#include <mach/misc_regs.h>
+
+#define IN0_MEM_SIZE	(200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE	(0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE	(20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE	(12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE	(12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE	(12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK	(SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT	0
+#define INT_TYPE_INTX	1
+#define INT_TYPE_MSI	2
+struct spear_pcie_gadget_config {
+	void __iomem *base;
+	void __iomem *va_app_base;
+	void __iomem *va_dbi_base;
+	char int_type[10];
+	ulong requested_msi;
+	ulong configured_msi;
+	ulong bar0_size;
+	ulong bar0_rw_offset;
+	void __iomem *va_bar0_address;
+};
+
+struct pcie_gadget_target {
+	struct configfs_subsystem subsys;
+	struct spear_pcie_gadget_config config;
+};
+
+struct pcie_gadget_target_attr {
+	struct configfs_attribute	attr;
+	ssize_t		(*show)(struct spear_pcie_gadget_config *config,
+						char *buf);
+	ssize_t		(*store)(struct spear_pcie_gadget_config *config,
+						 const char *buf,
+						 size_t count);
+};
+
+static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+	/* Enable DBI access */
+	writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+	/* disable DBI access */
+	writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+		int where, int size, u32 *val)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+	*val = readl(va_address);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+		int where, int size, u32 val)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+	if (size == 4)
+		writel(val, va_address);
+	else if (size == 2)
+		writew(val, va_address + (where & 2));
+	else if (size == 1)
+		writeb(val, va_address + (where & 3));
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL	48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+		u32 pos, int cap, int *ttl)
+{
+	u32 id;
+
+	while ((*ttl)--) {
+		spear_dbi_read_reg(config, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+	return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+			u32 pos, int cap)
+{
+	int ttl = PCI_FIND_CAP_TTL;
+
+	return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+				u8 hdr_type)
+{
+	u32 status;
+
+	spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	switch (hdr_type) {
+	case PCI_HEADER_TYPE_NORMAL:
+	case PCI_HEADER_TYPE_BRIDGE:
+		return PCI_CAPABILITY_LIST;
+	case PCI_HEADER_TYPE_CARDBUS:
+		return PCI_CB_CAPABILITY_LIST;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it. Possible values for @cap:
+ *
+ * %PCI_CAP_ID_PM	Power Management
+ * %PCI_CAP_ID_AGP	Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD	Vital Product Data
+ * %PCI_CAP_ID_SLOTID	Slot Identification
+ * %PCI_CAP_ID_MSI	Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP	CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX	PCI-X
+ * %PCI_CAP_ID_EXP	PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+		int cap)
+{
+	u32 pos;
+	u32 hdr_type;
+
+	spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+	pos = pci_find_own_cap_start(config, hdr_type);
+	if (pos)
+		pos = pci_find_own_next_cap(config, pos, cap);
+
+	return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+	return 0;
+}
+
+/*
+ * configfs interfaces show/store functions
+ */
+static ssize_t pcie_gadget_show_link(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+		return sprintf(buf, "UP");
+	else
+		return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	if (sysfs_streq(buf, "UP"))
+		writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+			&app_reg->app_ctrl_0);
+	else if (sysfs_streq(buf, "DOWN"))
+		writel(readl(&app_reg->app_ctrl_0)
+				& ~(1 << APP_LTSSM_ENABLE_ID),
+				&app_reg->app_ctrl_0);
+	else
+		return -EINVAL;
+	return count;
+}
+
+static ssize_t pcie_gadget_show_int_type(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	u32 cap, vec, flags;
+	ulong vector;
+
+	if (sysfs_streq(buf, "INTA"))
+		spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+	else if (sysfs_streq(buf, "MSI")) {
+		vector = config->requested_msi;
+		vec = 0;
+		while (vector > 1) {
+			vector /= 2;
+			vec++;
+		}
+		spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+		cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+		spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+		flags &= ~PCI_MSI_FLAGS_QMASK;
+		flags |= vec << 1;
+		spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+	} else
+		return -EINVAL;
+
+	strcpy(config->int_type, buf);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_no_of_msi(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	u32 cap, vec, flags;
+	ulong vector;
+
+	if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+			!= (1 << CFG_MSI_EN_ID))
+		vector = 0;
+	else {
+		cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+		spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+		flags &= ~PCI_MSI_FLAGS_QSIZE;
+		vec = flags >> 4;
+		vector = 1;
+		while (vec--)
+			vector *= 2;
+	}
+	config->configured_msi = vector;
+
+	return sprintf(buf, "%lu", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	if (strict_strtoul(buf, 0, &config->requested_msi))
+		return -EINVAL;
+	if (config->requested_msi > 32)
+		config->requested_msi = 32;
+
+	return count;
+}
+
+static ssize_t pcie_gadget_store_inta(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong en;
+
+	if (strict_strtoul(buf, 0, &en))
+		return -EINVAL;
+
+	if (en)
+		writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+				&app_reg->app_ctrl_0);
+	else
+		writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+				&app_reg->app_ctrl_0);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_store_send_msi(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong vector;
+	u32 ven_msi;
+
+	if (strict_strtoul(buf, 0, &vector))
+		return -EINVAL;
+
+	if (!config->configured_msi)
+		return -EINVAL;
+
+	if (vector >= config->configured_msi)
+		return -EINVAL;
+
+	ven_msi = readl(&app_reg->ven_msi_1);
+	ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+	ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+	ven_msi &= ~VEN_MSI_TC_MASK;
+	ven_msi |= 0 << VEN_MSI_TC_ID;
+	ven_msi &= ~VEN_MSI_VECTOR_MASK;
+	ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+	/* generating interrupt for msi vector */
+	ven_msi |= VEN_MSI_REQ_EN;
+	writel(ven_msi, &app_reg->ven_msi_1);
+	udelay(1);
+	ven_msi &= ~VEN_MSI_REQ_EN;
+	writel(ven_msi, &app_reg->ven_msi_1);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_vendor_id(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	u32 id;
+
+	spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+	return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong id;
+
+	if (strict_strtoul(buf, 0, &id))
+		return -EINVAL;
+
+	spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_device_id(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	u32 id;
+
+	spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+	return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong id;
+
+	if (strict_strtoul(buf, 0, &id))
+		return -EINVAL;
+
+	spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_size(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	return sprintf(buf, "%lx", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong size;
+	u32 pos, pos1;
+	u32 no_of_bit = 0;
+
+	if (strict_strtoul(buf, 0, &size))
+		return -EINVAL;
+	/* min bar size is 256 */
+	if (size <= 0x100)
+		size = 0x100;
+	/* max bar size is 1MB*/
+	else if (size >= 0x100000)
+		size = 0x100000;
+	else {
+		pos = 0;
+		pos1 = 0;
+		while (pos < 21) {
+			pos = find_next_bit((ulong *)&size, 21, pos);
+			if (pos != 21)
+				pos1 = pos + 1;
+			pos++;
+			no_of_bit++;
+		}
+		if (no_of_bit == 2)
+			pos1--;
+
+		size = 1 << pos1;
+	}
+	config->bar0_size = size;
+	spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_address(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+	return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong address;
+
+	if (strict_strtoul(buf, 0, &address))
+		return -EINVAL;
+
+	address &= ~(config->bar0_size - 1);
+	if (config->va_bar0_address)
+		iounmap(config->va_bar0_address);
+	config->va_bar0_address = ioremap(address, config->bar0_size);
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	writel(address, &app_reg->pim0_mem_addr_start);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	return sprintf(buf, "%lx", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong offset;
+
+	if (strict_strtoul(buf, 0, &offset))
+		return -EINVAL;
+
+	if (offset % 4)
+		return -EINVAL;
+
+	config->bar0_rw_offset = offset;
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_data(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	ulong data;
+
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+	return sprintf(buf, "%lx", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong data;
+
+	if (strict_strtoul(buf, 0, &data))
+		return -EINVAL;
+
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+	return count;
+}
+
+/*
+ * Attribute definitions.
+ */
+
+#define PCIE_GADGET_TARGET_ATTR_RO(_name)				\
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name =	\
+	__CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
+
+#define PCIE_GADGET_TARGET_ATTR_WO(_name)				\
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name =	\
+	__CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
+
+#define PCIE_GADGET_TARGET_ATTR_RW(_name)				\
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name =	\
+	__CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
+			pcie_gadget_store_##_name)
+PCIE_GADGET_TARGET_ATTR_RW(link);
+PCIE_GADGET_TARGET_ATTR_RW(int_type);
+PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
+PCIE_GADGET_TARGET_ATTR_WO(inta);
+PCIE_GADGET_TARGET_ATTR_WO(send_msi);
+PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
+PCIE_GADGET_TARGET_ATTR_RW(device_id);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
+
+static struct configfs_attribute *pcie_gadget_target_attrs[] = {
+	&pcie_gadget_target_link.attr,
+	&pcie_gadget_target_int_type.attr,
+	&pcie_gadget_target_no_of_msi.attr,
+	&pcie_gadget_target_inta.attr,
+	&pcie_gadget_target_send_msi.attr,
+	&pcie_gadget_target_vendor_id.attr,
+	&pcie_gadget_target_device_id.attr,
+	&pcie_gadget_target_bar0_size.attr,
+	&pcie_gadget_target_bar0_address.attr,
+	&pcie_gadget_target_bar0_rw_offset.attr,
+	&pcie_gadget_target_bar0_data.attr,
+	NULL,
+};
+
+static struct pcie_gadget_target *to_target(struct config_item *item)
+{
+	return item ?
+		container_of(to_configfs_subsystem(to_config_group(item)),
+				struct pcie_gadget_target, subsys) : NULL;
+}
+
+/*
+ * Item operations and type for pcie_gadget_target.
+ */
+
+static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
+					   struct configfs_attribute *attr,
+					   char *buf)
+{
+	ssize_t ret = -EINVAL;
+	struct pcie_gadget_target *target = to_target(item);
+	struct pcie_gadget_target_attr *t_attr =
+		container_of(attr, struct pcie_gadget_target_attr, attr);
+
+	if (t_attr->show)
+		ret = t_attr->show(&target->config, buf);
+	return ret;
+}
+
+static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
+					struct configfs_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	ssize_t ret = -EINVAL;
+	struct pcie_gadget_target *target = to_target(item);
+	struct pcie_gadget_target_attr *t_attr =
+		container_of(attr, struct pcie_gadget_target_attr, attr);
+
+	if (t_attr->store)
+		ret = t_attr->store(&target->config, buf, count);
+	return ret;
+}
+
+static struct configfs_item_operations pcie_gadget_target_item_ops = {
+	.show_attribute		= pcie_gadget_target_attr_show,
+	.store_attribute	= pcie_gadget_target_attr_store,
+};
+
+static struct config_item_type pcie_gadget_target_type = {
+	.ct_attrs		= pcie_gadget_target_attrs,
+	.ct_item_ops		= &pcie_gadget_target_item_ops,
+	.ct_owner		= THIS_MODULE,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	/*setup registers for outbound translation */
+
+	writel(config->base, &app_reg->in0_mem_addr_start);
+	writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+			&app_reg->in0_mem_addr_limit);
+	writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+			&app_reg->in1_mem_addr_limit);
+	writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+	writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+			&app_reg->in_io_addr_limit);
+	writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+	writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+			&app_reg->in_cfg0_addr_limit);
+	writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+	writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+			&app_reg->in_cfg1_addr_limit);
+	writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+	writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+			&app_reg->in_msg_addr_limit);
+
+	writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+	writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+	/*setup registers for inbound translation */
+
+	/* Keep AORAM mapped at BAR0 as default */
+	config->bar0_size = INBOUND_ADDR_MASK + 1;
+	spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+	spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+	config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
+			config->bar0_size);
+
+	writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+	writel(0, &app_reg->pim1_mem_addr_start);
+	writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_rom_addr_start);
+
+	writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+			| ((u32)1 << REG_TRANSLATION_ENABLE),
+			&app_reg->app_ctrl_0);
+	/* disable all rx interrupts */
+	writel(0, &app_reg->int_mask);
+
+	/* Select INTA as default*/
+	spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+	struct resource *res0, *res1;
+	unsigned int status = 0;
+	int irq;
+	struct clk *clk;
+	static struct pcie_gadget_target *target;
+	struct spear_pcie_gadget_config *config;
+	struct config_item		*cg_item;
+	struct configfs_subsystem *subsys;
+
+	/* get resource for application registers*/
+
+	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res0) {
+		dev_err(&pdev->dev, "no resource defined\n");
+		return -EBUSY;
+	}
+	if (!request_mem_region(res0->start, resource_size(res0),
+				pdev->name)) {
+		dev_err(&pdev->dev, "pcie gadget region already	claimed\n");
+		return -EBUSY;
+	}
+	/* get resource for dbi registers*/
+
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res1) {
+		dev_err(&pdev->dev, "no resource defined\n");
+		goto err_rel_res0;
+	}
+	if (!request_mem_region(res1->start, resource_size(res1),
+				pdev->name)) {
+		dev_err(&pdev->dev, "pcie gadget region already	claimed\n");
+		goto err_rel_res0;
+	}
+
+	target = kzalloc(sizeof(*target), GFP_KERNEL);
+	if (!target) {
+		dev_err(&pdev->dev, "out of memory\n");
+		status = -ENOMEM;
+		goto err_rel_res;
+	}
+
+	cg_item = &target->subsys.su_group.cg_item;
+	sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
+	cg_item->ci_type	= &pcie_gadget_target_type;
+	config = &target->config;
+	config->va_app_base = (void __iomem *)ioremap(res0->start,
+			resource_size(res0));
+	if (!config->va_app_base) {
+		dev_err(&pdev->dev, "ioremap fail\n");
+		status = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	config->base = (void __iomem *)res1->start;
+
+	config->va_dbi_base = (void __iomem *)ioremap(res1->start,
+			resource_size(res1));
+	if (!config->va_dbi_base) {
+		dev_err(&pdev->dev, "ioremap fail\n");
+		status = -ENOMEM;
+		goto err_iounmap_app;
+	}
+
+	dev_set_drvdata(&pdev->dev, target);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no update irq?\n");
+		status = irq;
+		goto err_iounmap;
+	}
+
+	status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+	if (status) {
+		dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+				claimed\n", irq);
+		goto err_iounmap;
+	}
+
+	/* Register configfs hooks */
+	subsys = &target->subsys;
+	config_group_init(&subsys->su_group);
+	mutex_init(&subsys->su_mutex);
+	status = configfs_register_subsystem(subsys);
+	if (status)
+		goto err_irq;
+
+	/*
+	 * init basic pcie application registers
+	 * do not enable clock if it is PCIE0.Ideally , all controller should
+	 * have been independent from others with respect to clock. But PCIE1
+	 * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
+	 */
+	if (pdev->id == 1) {
+		/*
+		 * Ideally CFG Clock should have been also enabled here. But
+		 * it is done currently during board init routne
+		 */
+		clk = clk_get_sys("pcie1", NULL);
+		if (IS_ERR(clk)) {
+			pr_err("%s:couldn't get clk for pcie1\n", __func__);
+			goto err_irq;
+		}
+		if (clk_enable(clk)) {
+			pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+			goto err_irq;
+		}
+	} else if (pdev->id == 2) {
+		/*
+		 * Ideally CFG Clock should have been also enabled here. But
+		 * it is done currently during board init routne
+		 */
+		clk = clk_get_sys("pcie2", NULL);
+		if (IS_ERR(clk)) {
+			pr_err("%s:couldn't get clk for pcie2\n", __func__);
+			goto err_irq;
+		}
+		if (clk_enable(clk)) {
+			pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+			goto err_irq;
+		}
+	}
+	spear13xx_pcie_device_init(config);
+
+	return 0;
+err_irq:
+	free_irq(irq, NULL);
+err_iounmap:
+	iounmap(config->va_dbi_base);
+err_iounmap_app:
+	iounmap(config->va_app_base);
+err_kzalloc:
+	kfree(config);
+err_rel_res:
+	release_mem_region(res1->start, resource_size(res1));
+err_rel_res0:
+	release_mem_region(res0->start, resource_size(res0));
+	return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+	struct resource *res0, *res1;
+	static struct pcie_gadget_target *target;
+	struct spear_pcie_gadget_config *config;
+	int irq;
+
+	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	irq = platform_get_irq(pdev, 0);
+	target = dev_get_drvdata(&pdev->dev);
+	config = &target->config;
+
+	free_irq(irq, NULL);
+	iounmap(config->va_dbi_base);
+	iounmap(config->va_app_base);
+	release_mem_region(res1->start, resource_size(res1));
+	release_mem_region(res0->start, resource_size(res0));
+	configfs_unregister_subsystem(&target->subsys);
+	kfree(target);
+
+	return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+	.probe = spear_pcie_gadget_probe,
+	.remove = spear_pcie_gadget_remove,
+	.shutdown = spear_pcie_gadget_shutdown,
+	.driver = {
+		.name = "pcie-gadget-spear",
+		.bus = &platform_bus_type
+	},
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+	return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+	platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 9ee4c788aa69..b4488c8f6b23 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -649,7 +649,7 @@ static int kim_probe(struct platform_device *pdev)
 		/* multiple devices could exist */
 		st_kim_devices[pdev->id] = pdev;
 	} else {
-		/* platform's sure about existance of 1 device */
+		/* platform's sure about existence of 1 device */
 		st_kim_devices[0] = pdev;
 	}