summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/sharpsl.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-04-06 12:15:41 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-04-06 12:15:41 -0700
commit3fd14cdcc05a682b03743683ce3a726898b20555 (patch)
treed9f1a1f18d8a4168dec47d85397f36eae7f61633 /drivers/mtd/nand/raw/sharpsl.c
parent83c7c18b169bdac3dabab763d16549c1e4688a8b (diff)
parentfe5f31a8010a0cb13e72cfb72905fefa2a41730c (diff)
downloadlinux-stable-3fd14cdcc05a682b03743683ce3a726898b20555.tar.gz
linux-stable-3fd14cdcc05a682b03743683ce3a726898b20555.tar.bz2
linux-stable-3fd14cdcc05a682b03743683ce3a726898b20555.zip
Merge tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon: "MTD Core: - Remove support for asynchronous erase (not implemented by any of the existing drivers anyway) - Remove Cyrille from the list of SPI NOR and MTD maintainers - Fix kernel doc headers - Allow users to define the partitions parsers they want to test through a DT property (compatible of the partitions subnode) - Remove the bfin-async-flash driver (the only architecture using it has been removed) - Fix pagetest test - Add extra checks in mtd_erase() - Simplify the MTD partition creation logic and get rid of mtd_add_device_partitions() MTD Drivers: - Add endianness information to the physmap DT binding - Add Eon EN29LV400A IDs to JEDEC probe logic - Use %*ph where appropriate SPI NOR Drivers: - Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller - Remove an unneeded driver.bus assigned in the fsl-qspi driver NAND Core: - Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices - Move onenand code base to the drivers/mtd/nand/ dir - Rework timing mode selection - Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported - Stop embedding ONFI/JEDEC param page in nand_chip NAND Drivers: - Rework/cleanup of the mxc driver - Various cleanups in the vf610 driver - Migrate the fsmc and vf610 to ->exec_op() - Get rid of the pxa driver (replaced by marvell_nand) - Support ->setup_data_interface() in the GPMI driver - Fix probe error path in several drivers - Remove support for unused hw_syndrome mode in sunxi_nand - Various minor improvements" * tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits) dt-bindings: fsl-quadspi: Add the example of two SPI NOR mtd: fsl-quadspi: Distinguish the mtd device names mtd: nand: Fix some function description mismatches in core.c mtd: fsl-quadspi: Remove unneeded driver.bus assignment mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk mtd: rawnand: s3c2410: enhance the probe function error path mtd: rawnand: tango: fix probe function error path mtd: rawnand: sh_flctl: fix the probe function error path mtd: rawnand: omap2: fix the probe function error path mtd: rawnand: mxc: fix probe function error path mtd: rawnand: denali: fix probe function error path mtd: rawnand: davinci: fix probe function error path mtd: rawnand: cafe: fix probe function error path mtd: rawnand: brcmnand: fix probe function error path mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode mtd: rawnand: marvell: Fix clock resource by adding a register clock mtd: ftl: Use DIV_ROUND_UP() mtd: Fix some function description mismatches in mtdcore.c mtd: physmap_of: update struct map_info's swap as per map requirement dt-bindings: mtd-physmap: Add endianness supports ...
Diffstat (limited to 'drivers/mtd/nand/raw/sharpsl.c')
-rw-r--r--drivers/mtd/nand/raw/sharpsl.c233
1 files changed, 233 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/sharpsl.c b/drivers/mtd/nand/raw/sharpsl.c
new file mode 100644
index 000000000000..e93df02c825e
--- /dev/null
+++ b/drivers/mtd/nand/raw/sharpsl.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2004 Richard Purdie
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * Based on Sharp's NAND driver sharp_sl.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+struct sharpsl_nand {
+ struct nand_chip chip;
+
+ void __iomem *io;
+};
+
+static inline struct sharpsl_nand *mtd_to_sharpsl(struct mtd_info *mtd)
+{
+ return container_of(mtd_to_nand(mtd), struct sharpsl_nand, chip);
+}
+
+/* register offset */
+#define ECCLPLB 0x00 /* line parity 7 - 0 bit */
+#define ECCLPUB 0x04 /* line parity 15 - 8 bit */
+#define ECCCP 0x08 /* column parity 5 - 0 bit */
+#define ECCCNTR 0x0C /* ECC byte counter */
+#define ECCCLRR 0x10 /* cleare ECC */
+#define FLASHIO 0x14 /* Flash I/O */
+#define FLASHCTL 0x18 /* Flash Control */
+
+/* Flash control bit */
+#define FLRYBY (1 << 5)
+#define FLCE1 (1 << 4)
+#define FLWP (1 << 3)
+#define FLALE (1 << 2)
+#define FLCLE (1 << 1)
+#define FLCE0 (1 << 0)
+
+/*
+ * hardware specific access to control-lines
+ * ctrl:
+ * NAND_CNE: bit 0 -> ! bit 0 & 4
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 2
+ *
+ */
+static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits = ctrl & 0x07;
+
+ bits |= (ctrl & 0x01) << 4;
+
+ bits ^= 0x11;
+
+ writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int sharpsl_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
+}
+
+static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ writeb(0, sharpsl->io + ECCCLRR);
+}
+
+static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
+ ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
+ ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
+ return readb(sharpsl->io + ECCCNTR) != 0;
+}
+
+/*
+ * Main initialization routine
+ */
+static int sharpsl_nand_probe(struct platform_device *pdev)
+{
+ struct nand_chip *this;
+ struct mtd_info *mtd;
+ struct resource *r;
+ int err = 0;
+ struct sharpsl_nand *sharpsl;
+ struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
+
+ if (!data) {
+ dev_err(&pdev->dev, "no platform data!\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for MTD device structure and private data */
+ sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
+ if (!sharpsl)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no io memory resource defined!\n");
+ err = -ENODEV;
+ goto err_get_res;
+ }
+
+ /* map physical address */
+ sharpsl->io = ioremap(r->start, resource_size(r));
+ if (!sharpsl->io) {
+ dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *)(&sharpsl->chip);
+
+ /* Link the private data with the MTD structure */
+ mtd = nand_to_mtd(this);
+ mtd->dev.parent = &pdev->dev;
+ mtd_set_ooblayout(mtd, data->ecc_layout);
+
+ platform_set_drvdata(pdev, sharpsl);
+
+ /*
+ * PXA initialize
+ */
+ writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
+
+ /* Set address of NAND IO lines */
+ this->IO_ADDR_R = sharpsl->io + FLASHIO;
+ this->IO_ADDR_W = sharpsl->io + FLASHIO;
+ /* Set address of hardware control function */
+ this->cmd_ctrl = sharpsl_nand_hwcontrol;
+ this->dev_ready = sharpsl_nand_dev_ready;
+ /* 15 us command delay time */
+ this->chip_delay = 15;
+ /* set eccmode using hardware ECC */
+ this->ecc.mode = NAND_ECC_HW;
+ this->ecc.size = 256;
+ this->ecc.bytes = 3;
+ this->ecc.strength = 1;
+ this->badblock_pattern = data->badblock_pattern;
+ this->ecc.hwctl = sharpsl_nand_enable_hwecc;
+ this->ecc.calculate = sharpsl_nand_calculate_ecc;
+ this->ecc.correct = nand_correct_data;
+
+ /* Scan to find existence of the device */
+ err = nand_scan(mtd, 1);
+ if (err)
+ goto err_scan;
+
+ /* Register the partitions */
+ mtd->name = "sharpsl-nand";
+
+ err = mtd_device_parse_register(mtd, data->part_parsers, NULL,
+ data->partitions, data->nr_partitions);
+ if (err)
+ goto err_add;
+
+ /* Return happy */
+ return 0;
+
+err_add:
+ nand_release(mtd);
+
+err_scan:
+ iounmap(sharpsl->io);
+err_ioremap:
+err_get_res:
+ kfree(sharpsl);
+ return err;
+}
+
+/*
+ * Clean up routine
+ */
+static int sharpsl_nand_remove(struct platform_device *pdev)
+{
+ struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
+
+ /* Release resources, unregister device */
+ nand_release(nand_to_mtd(&sharpsl->chip));
+
+ iounmap(sharpsl->io);
+
+ /* Free the MTD device structure */
+ kfree(sharpsl);
+
+ return 0;
+}
+
+static struct platform_driver sharpsl_nand_driver = {
+ .driver = {
+ .name = "sharpsl-nand",
+ },
+ .probe = sharpsl_nand_probe,
+ .remove = sharpsl_nand_remove,
+};
+
+module_platform_driver(sharpsl_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");