Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c

1 files changed, 372 insertions, 144 deletions

diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 85f955f70417..55a2c0acfee7 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -44,6 +44,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
 	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_m88_cable_length_table)
 
 static const u16 e1000_igp_2_cable_length_table[] =
 	{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
@@ -130,7 +132,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 	u16 phy_id;
 	u16 retry_count = 0;
 
-	if (!(phy->ops.read_phy_reg))
+	if (!(phy->ops.read_reg))
 		goto out;
 
 	while (retry_count < 2) {
@@ -151,29 +153,29 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 			goto out;
 
 		/*
-		 * If the PHY ID is still unknown, we may have an 82577i
-		 * without link.  We will try again after setting Slow
-		 * MDIC mode. No harm in trying again in this case since
-		 * the PHY ID is unknown at this point anyway
+		 * If the PHY ID is still unknown, we may have an 82577
+		 * without link.  We will try again after setting Slow MDIC
+		 * mode. No harm in trying again in this case since the PHY
+		 * ID is unknown at this point anyway.
 		 */
-		ret_val = phy->ops.acquire_phy(hw);
+		ret_val = phy->ops.acquire(hw);
 		if (ret_val)
 			goto out;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
 		if (ret_val)
 			goto out;
-		phy->ops.release_phy(hw);
+		phy->ops.release(hw);
 
 		retry_count++;
 	}
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if (retry_count) {
-		ret_val = phy->ops.acquire_phy(hw);
+		ret_val = phy->ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
-		phy->ops.release_phy(hw);
+		phy->ops.release(hw);
 	}
 
 	return ret_val;
@@ -211,7 +213,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -238,11 +240,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Read did not complete\n");
+		e_dbg("MDI Read did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 	*data = (u16) mdic;
@@ -264,7 +266,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -292,11 +294,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Write did not complete\n");
+		e_dbg("MDI Write did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 
@@ -317,14 +319,14 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
 {
 	s32 ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					   data);
 
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -342,14 +344,14 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
 {
 	s32 ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					    data);
 
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -371,10 +373,10 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -392,7 +394,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
 
 release:
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 out:
 	return ret_val;
 }
@@ -442,10 +444,10 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -463,7 +465,7 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
 
 release:
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -515,10 +517,10 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -533,7 +535,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
 	*data = (u16)kmrnctrlsta;
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -587,10 +589,10 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -602,7 +604,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
 	udelay(2);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -649,7 +651,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	u16 phy_data;
 
 	/* Enable CRS on TX. This must be set for half-duplex operation. */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
 	if (ret_val)
 		goto out;
 
@@ -658,7 +660,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	/* Enable downshift */
 	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
-	ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
+	ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
 
 out:
 	return ret_val;
@@ -776,12 +778,12 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	/* Commit the changes. */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error committing the PHY changes\n");
+		e_dbg("Error committing the PHY changes\n");
 		return ret_val;
 	}
 
 	if (phy->type == e1000_phy_82578) {
-		ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
 		                            &phy_data);
 		if (ret_val)
 			return ret_val;
@@ -789,7 +791,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 		/* 82578 PHY - set the downshift count to 1x. */
 		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
 		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
-		ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
 		                             phy_data);
 		if (ret_val)
 			return ret_val;
@@ -813,7 +815,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 
 	ret_val = e1000_phy_hw_reset(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error resetting the PHY.\n");
+		e_dbg("Error resetting the PHY.\n");
 		return ret_val;
 	}
 
@@ -824,9 +826,9 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 	msleep(100);
 
 	/* disable lplu d0 during driver init */
-	ret_val = e1000_set_d0_lplu_state(hw, 0);
+	ret_val = e1000_set_d0_lplu_state(hw, false);
 	if (ret_val) {
-		hw_dbg(hw, "Error Disabling LPLU D0\n");
+		e_dbg("Error Disabling LPLU D0\n");
 		return ret_val;
 	}
 	/* Configure mdi-mdix settings */
@@ -962,39 +964,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 				 NWAY_AR_10T_HD_CAPS);
 	mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
 
-	hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised);
+	e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
 
 	/* Do we want to advertise 10 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
-		hw_dbg(hw, "Advertise 10mb Half duplex\n");
+		e_dbg("Advertise 10mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
 	}
 
 	/* Do we want to advertise 10 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
-		hw_dbg(hw, "Advertise 10mb Full duplex\n");
+		e_dbg("Advertise 10mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
-		hw_dbg(hw, "Advertise 100mb Half duplex\n");
+		e_dbg("Advertise 100mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
-		hw_dbg(hw, "Advertise 100mb Full duplex\n");
+		e_dbg("Advertise 100mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
 	}
 
 	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
 	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
-		hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n");
+		e_dbg("Advertise 1000mb Half duplex request denied!\n");
 
 	/* Do we want to advertise 1000 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
-		hw_dbg(hw, "Advertise 1000mb Full duplex\n");
+		e_dbg("Advertise 1000mb Full duplex\n");
 		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
 	}
 
@@ -1053,7 +1055,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		ret_val = -E1000_ERR_CONFIG;
 		return ret_val;
 	}
@@ -1062,7 +1064,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
 	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
 		ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
@@ -1099,13 +1101,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (phy->autoneg_advertised == 0)
 		phy->autoneg_advertised = phy->autoneg_mask;
 
-	hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n");
+	e_dbg("Reconfiguring auto-neg advertisement params\n");
 	ret_val = e1000_phy_setup_autoneg(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Setting up Auto-Negotiation\n");
+		e_dbg("Error Setting up Auto-Negotiation\n");
 		return ret_val;
 	}
-	hw_dbg(hw, "Restarting Auto-Neg\n");
+	e_dbg("Restarting Auto-Neg\n");
 
 	/*
 	 * Restart auto-negotiation by setting the Auto Neg Enable bit and
@@ -1127,7 +1129,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		ret_val = e1000_wait_autoneg(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error while waiting for "
+			e_dbg("Error while waiting for "
 				 "autoneg to complete\n");
 			return ret_val;
 		}
@@ -1165,10 +1167,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 		 * PHY will be set to 10H, 10F, 100H or 100F
 		 * depending on user settings.
 		 */
-		hw_dbg(hw, "Forcing Speed and Duplex\n");
+		e_dbg("Forcing Speed and Duplex\n");
 		ret_val = e1000_phy_force_speed_duplex(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error Forcing Speed and Duplex\n");
+			e_dbg("Error Forcing Speed and Duplex\n");
 			return ret_val;
 		}
 	}
@@ -1185,11 +1187,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 		return ret_val;
 
 	if (link) {
-		hw_dbg(hw, "Valid link established!!!\n");
+		e_dbg("Valid link established!!!\n");
 		e1000e_config_collision_dist(hw);
 		ret_val = e1000e_config_fc_after_link_up(hw);
 	} else {
-		hw_dbg(hw, "Unable to establish link!!!\n");
+		e_dbg("Unable to establish link!!!\n");
 	}
 
 	return ret_val;
@@ -1235,12 +1237,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "IGP PSCR: %X\n", phy_data);
+	e_dbg("IGP PSCR: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 						     PHY_FORCE_LIMIT,
@@ -1250,7 +1252,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -1294,7 +1296,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data);
+	e_dbg("M88E1000 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -1312,7 +1314,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 		return ret_val;
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
 						     100000, &link);
@@ -1320,17 +1322,22 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!link) {
-			/*
-			 * We didn't get link.
-			 * Reset the DSP and cross our fingers.
-			 */
-			ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
-					   0x001d);
-			if (ret_val)
-				return ret_val;
-			ret_val = e1000e_phy_reset_dsp(hw);
-			if (ret_val)
-				return ret_val;
+			if (hw->phy.type != e1000_phy_m88) {
+				e_dbg("Link taking longer than expected.\n");
+			} else {
+				/*
+				 * We didn't get link.
+				 * Reset the DSP and cross our fingers.
+				 */
+				ret_val = e1e_wphy(hw,
+						M88E1000_PHY_PAGE_SELECT,
+						0x001d);
+				if (ret_val)
+					return ret_val;
+				ret_val = e1000e_phy_reset_dsp(hw);
+				if (ret_val)
+					return ret_val;
+			}
 		}
 
 		/* Try once more */
@@ -1340,6 +1347,9 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 			return ret_val;
 	}
 
+	if (hw->phy.type != e1000_phy_m88)
+		return 0;
+
 	ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
 	if (ret_val)
 		return ret_val;
@@ -1369,6 +1379,73 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ *  @hw: pointer to the HW structure
+ *
+ *  Forces the speed and duplex settings of the PHY.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &data);
+
+	ret_val = e1e_wphy(hw, PHY_CONTROL, data);
+	if (ret_val)
+		goto out;
+
+	/* Disable MDI-X support for 10/100 */
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	data &= ~IFE_PMC_AUTO_MDIX;
+	data &= ~IFE_PMC_FORCE_MDIX;
+
+	ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
+	if (ret_val)
+		goto out;
+
+	e_dbg("IFE PMC: %X\n", data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			e_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
  *  @hw: pointer to the HW structure
  *  @phy_ctrl: pointer to current value of PHY_CONTROL
@@ -1403,11 +1480,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
 	if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
 		ctrl &= ~E1000_CTRL_FD;
 		*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	} else {
 		ctrl |= E1000_CTRL_FD;
 		*phy_ctrl |= MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	}
 
 	/* Forcing 10mb or 100mb? */
@@ -1415,12 +1492,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
 		ctrl |= E1000_CTRL_SPD_100;
 		*phy_ctrl |= MII_CR_SPEED_100;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-		hw_dbg(hw, "Forcing 100mb\n");
+		e_dbg("Forcing 100mb\n");
 	} else {
 		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
 		*phy_ctrl |= MII_CR_SPEED_10;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-		hw_dbg(hw, "Forcing 10mb\n");
+		e_dbg("Forcing 10mb\n");
 	}
 
 	e1000e_config_collision_dist(hw);
@@ -1523,8 +1600,8 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 	switch (phy->type) {
 	case e1000_phy_m88:
 	case e1000_phy_gg82563:
+	case e1000_phy_bm:
 	case e1000_phy_82578:
-	case e1000_phy_82577:
 		offset	= M88E1000_PHY_SPEC_STATUS;
 		mask	= M88E1000_PSSR_DOWNSHIFT;
 		break;
@@ -1535,7 +1612,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 		break;
 	default:
 		/* speed downshift not supported */
-		phy->speed_downgraded = 0;
+		phy->speed_downgraded = false;
 		return 0;
 	}
 
@@ -1555,7 +1632,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
  *
  *  Polarity is determined based on the PHY specific status register.
  **/
-static s32 e1000_check_polarity_m88(struct e1000_hw *hw)
+s32 e1000_check_polarity_m88(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -1580,7 +1657,7 @@ static s32 e1000_check_polarity_m88(struct e1000_hw *hw)
  *  Polarity is determined based on the PHY port status register, and the
  *  current speed (since there is no polarity at 100Mbps).
  **/
-static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
+s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -1618,6 +1695,39 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	/*
+	 * Polarity is determined based on the reversal feature being enabled.
+	 */
+	if (phy->polarity_correction) {
+		offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+		mask = IFE_PESC_POLARITY_REVERSED;
+	} else {
+		offset = IFE_PHY_SPECIAL_CONTROL;
+		mask = IFE_PSC_FORCE_POLARITY;
+	}
+
+	ret_val = e1e_rphy(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->cable_polarity = (phy_data & mask)
+		                       ? e1000_rev_polarity_reversed
+		                       : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
  *  e1000_wait_autoneg - Wait for auto-neg completion
  *  @hw: pointer to the HW structure
  *
@@ -1717,15 +1827,21 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 	if (ret_val)
-		return ret_val;
+		goto out;
 
 	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-		M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	        M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_m88_cable_length_table[index];
-	phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
+out:
 	return ret_val;
 }
 
@@ -1736,7 +1852,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
  *  The automatic gain control (agc) normalizes the amplitude of the
  *  received signal, adjusting for the attenuation produced by the
  *  cable.  By reading the AGC registers, which represent the
- *  combination of course and fine gain value, the value can be put
+ *  combination of coarse and fine gain value, the value can be put
  *  into a lookup table to obtain the approximate cable length
  *  for each channel.
  **/
@@ -1761,7 +1877,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
 
 		/*
 		 * Getting bits 15:9, which represent the combination of
-		 * course and fine gain values.  The result is a number
+		 * coarse and fine gain values.  The result is a number
 		 * that can be put into the lookup table to obtain the
 		 * approximate cable length.
 		 */
@@ -1815,8 +1931,8 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 	u16 phy_data;
 	bool link;
 
-	if (hw->phy.media_type != e1000_media_type_copper) {
-		hw_dbg(hw, "Phy info is only valid for copper media\n");
+	if (phy->media_type != e1000_media_type_copper) {
+		e_dbg("Phy info is only valid for copper media\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1825,7 +1941,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1893,11 +2009,11 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
-	phy->polarity_correction = 1;
+	phy->polarity_correction = true;
 
 	ret_val = e1000_check_polarity_igp(hw);
 	if (ret_val)
@@ -1936,6 +2052,61 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_get_phy_info_ife - Retrieves various IFE PHY states
+ *  @hw: pointer to the HW structure
+ *
+ *  Populates "phy" structure with various feature states.
+ **/
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		e_dbg("Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+	if (ret_val)
+		goto out;
+	phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
+	                           ? false : true;
+
+	if (phy->polarity_correction) {
+		ret_val = e1000_check_polarity_ife(hw);
+		if (ret_val)
+			goto out;
+	} else {
+		/* Polarity is forced */
+		phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
+		                      ? e1000_rev_polarity_reversed
+		                      : e1000_rev_polarity_normal;
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+
+	/* The following parameters are undefined for 10/100 operation. */
+	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+	phy->local_rx = e1000_1000t_rx_status_undefined;
+	phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_phy_sw_reset - PHY software reset
  *  @hw: pointer to the HW structure
  *
@@ -1980,7 +2151,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 	if (ret_val)
 		return 0;
 
-	ret_val = phy->ops.acquire_phy(hw);
+	ret_val = phy->ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -1995,7 +2166,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 
 	udelay(150);
 
-	phy->ops.release_phy(hw);
+	phy->ops.release(hw);
 
 	return e1000_get_phy_cfg_done(hw);
 }
@@ -2021,7 +2192,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw)
  **/
 s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
 {
-	hw_dbg(hw, "Running IGP 3 PHY init script\n");
+	e_dbg("Running IGP 3 PHY init script\n");
 
 	/* PHY init IGP 3 */
 	/* Enable rise/fall, 10-mode work in class-A */
@@ -2189,28 +2360,34 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 {
 	s32 ret_val = -E1000_ERR_PHY_TYPE;
-	u32 phy_addr= 0;
-	u32 i = 0;
+	u32 phy_addr = 0;
+	u32 i;
 	enum e1000_phy_type phy_type = e1000_phy_unknown;
 
-	do {
-		for (phy_addr = 0; phy_addr < 4; phy_addr++) {
-			hw->phy.addr = phy_addr;
+	hw->phy.id = phy_type;
+
+	for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+		hw->phy.addr = phy_addr;
+		i = 0;
+
+		do {
 			e1000e_get_phy_id(hw);
 			phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
 
-			/* 
+			/*
 			 * If phy_type is valid, break - we found our
 			 * PHY address
 			 */
 			if (phy_type  != e1000_phy_unknown) {
 				ret_val = 0;
-				break;
+				goto out;
 			}
-		}
-		i++;
-	} while ((ret_val != 0) && (i < 100));
+			msleep(1);
+			i++;
+		} while (i < 10);
+	}
 
+out:
 	return ret_val;
 }
 
@@ -2246,7 +2423,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
 	u32 page = offset >> IGP_PAGE_SHIFT;
 	u32 page_shift = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2284,7 +2461,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
 	                                    data);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2305,7 +2482,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
 	u32 page = offset >> IGP_PAGE_SHIFT;
 	u32 page_shift = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2342,7 +2519,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 	                                   data);
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2361,7 +2538,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
 	s32 ret_val;
 	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2387,7 +2564,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					   data);
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2405,7 +2582,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
 	s32 ret_val;
 	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2431,7 +2608,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
 					    data);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2464,7 +2641,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 	/* Gig must be disabled for MDIO accesses to page 800 */
 	if ((hw->mac.type == e1000_pchlan) &&
 	   (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
-		hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+		e_dbg("Attempting to access page 800 while gig enabled.\n");
 
 	/* All operations in this function are phy address 1 */
 	hw->phy.addr = 1;
@@ -2474,20 +2651,26 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 	                          (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not read PHY page 769\n");
 		goto out;
+	}
 
 	/* First clear bit 4 to avoid a power state change */
 	phy_reg &= ~(BM_WUC_HOST_WU_BIT);
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not clear PHY page 769 bit 4\n");
 		goto out;
+	}
 
 	/* Write bit 2 = 1, and clear bit 4 to 769_17 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
 	                                    phy_reg | BM_WUC_ENABLE_BIT);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not write PHY page 769 bit 2\n");
 		goto out;
+	}
 
 	/* Select page 800 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -2495,21 +2678,25 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 
 	/* Write the page 800 offset value using opcode 0x11 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not write address opcode to page 800\n");
 		goto out;
+	}
 
 	if (read) {
 	        /* Read the page 800 value using opcode 0x12 */
 		ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 		                                   data);
 	} else {
-	        /* Read the page 800 value using opcode 0x12 */
+	        /* Write the page 800 value using opcode 0x12 */
 		ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 						    *data);
 	}
 
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not access data value from page 800\n");
 		goto out;
+	}
 
 	/*
 	 * Restore 769_17.2 to its original value
@@ -2520,12 +2707,53 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 
 	/* Clear 769_17.2 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (ret_val) {
+		e_dbg("Could not clear PHY page 769 bit 2\n");
+		goto out;
+	}
 
 out:
 	return ret_val;
 }
 
 /**
+ * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_up_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+	mii_reg &= ~MII_CR_POWER_DOWN;
+	e1e_wphy(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_down_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+	mii_reg |= MII_CR_POWER_DOWN;
+	e1e_wphy(hw, PHY_CONTROL, mii_reg);
+	msleep(1);
+}
+
+/**
  *  e1000e_commit_phy - Soft PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -2534,8 +2762,8 @@ out:
  **/
 s32 e1000e_commit_phy(struct e1000_hw *hw)
 {
-	if (hw->phy.ops.commit_phy)
-		return hw->phy.ops.commit_phy(hw);
+	if (hw->phy.ops.commit)
+		return hw->phy.ops.commit(hw);
 
 	return 0;
 }
@@ -2614,7 +2842,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 	bool in_slow_mode = false;
 
 	if (!locked) {
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2670,7 +2898,7 @@ out:
 		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -2723,7 +2951,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 	bool in_slow_mode = false;
 
 	if (!locked) {
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2796,7 +3024,7 @@ out:
 		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -2872,7 +3100,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 	/* masking with 0x3F to remove the page from offset */
 	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
 	if (ret_val) {
-		hw_dbg(hw, "Could not write PHY the HV address register\n");
+		e_dbg("Could not write PHY the HV address register\n");
 		goto out;
 	}
 
@@ -2883,7 +3111,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
 
 	if (ret_val) {
-		hw_dbg(hw, "Could not read data value from HV data register\n");
+		e_dbg("Could not read data value from HV data register\n");
 		goto out;
 	}
 
@@ -2911,12 +3139,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 		goto out;
 
 	/* Do not apply workaround if in PHY loopback bit 14 set */
-	hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
 	if (data & PHY_CONTROL_LB)
 		goto out;
 
 	/* check if link is up and at 1Gbps */
-	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
+	ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
 	if (ret_val)
 		goto out;
 
@@ -2932,13 +3160,13 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	mdelay(200);
 
 	/* flush the packets in the fifo buffer */
-	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
 	                                HV_MUX_DATA_CTRL_GEN_TO_MAC |
 	                                HV_MUX_DATA_CTRL_FORCE_SPEED);
 	if (ret_val)
 		goto out;
 
-	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
 	                                HV_MUX_DATA_CTRL_GEN_TO_MAC);
 
 out:
@@ -2959,7 +3187,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 data;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
 
 	if (!ret_val)
 		phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
@@ -2984,13 +3212,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	u16 phy_data;
 	bool link;
 
-	ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
 		goto out;
 
 	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
 
-	ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
 		goto out;
 
@@ -2998,23 +3226,23 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	 * Clear Auto-Crossover to force MDI manually.  82577 requires MDI
 	 * forced whenever speed and duplex are forced.
 	 */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data);
 	if (ret_val)
 		goto out;
 
 	phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX;
 	phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX;
 
-	ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data);
+	ret_val = phy->ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data);
 	if (ret_val)
 		goto out;
 
-	hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+	e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 		                                     PHY_FORCE_LIMIT,
@@ -3024,7 +3252,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 			goto out;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -3060,7 +3288,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 		goto out;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		ret_val = -E1000_ERR_CONFIG;
 		goto out;
 	}
@@ -3071,7 +3299,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 	if (ret_val)
 		goto out;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
 	if (ret_val)
 		goto out;
 
@@ -3083,7 +3311,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 		if (ret_val)
 			goto out;
 
-		ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data);
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
 		if (ret_val)
 			goto out;
 
@@ -3117,7 +3345,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data, length;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
 	if (ret_val)
 		goto out;
 
@@ -3125,7 +3353,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 	         I82577_DSTATUS_CABLE_LENGTH_SHIFT;
 
 	if (length == E1000_CABLE_LENGTH_UNDEFINED)
-		ret_val = E1000_ERR_PHY;
+		ret_val = -E1000_ERR_PHY;
 
 	phy->cable_length = length;