Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

10 files changed, 339 insertions, 74 deletions

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 5ec5a2b0e989..0b2a1ccd276d 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -1475,9 +1475,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	u32 val;
 
 	if (pdev->revision >= NX_P3_A0 && pdev->revision <= NX_P3_B1) {
-		pr_warning("%s: chip revisions between 0x%x-0x%x "
-				"will not be enabled.\n",
-				module_name(THIS_MODULE), NX_P3_A0, NX_P3_B1);
+		pr_warn("%s: chip revisions between 0x%x-0x%x will not be enabled\n",
+			module_name(THIS_MODULE), NX_P3_A0, NX_P3_B1);
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index b84f5ea3d659..e56c1bb36141 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -39,8 +39,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 3
-#define _QLCNIC_LINUX_SUBVERSION 61
-#define QLCNIC_LINUX_VERSIONID  "5.3.61"
+#define _QLCNIC_LINUX_SUBVERSION 62
+#define QLCNIC_LINUX_VERSIONID  "5.3.62"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@@ -540,6 +540,8 @@ struct qlcnic_hardware_context {
 	u8 lb_mode;
 	u16 vxlan_port;
 	struct device *hwmon_dev;
+	u32 post_mode;
+	bool run_post;
 };
 
 struct qlcnic_adapter_stats {
@@ -2283,6 +2285,7 @@ extern const struct ethtool_ops qlcnic_ethtool_failed_ops;
 
 #define PCI_DEVICE_ID_QLOGIC_QLE824X		0x8020
 #define PCI_DEVICE_ID_QLOGIC_QLE834X		0x8030
+#define PCI_DEVICE_ID_QLOGIC_QLE8830		0x8830
 #define PCI_DEVICE_ID_QLOGIC_VF_QLE834X	0x8430
 #define PCI_DEVICE_ID_QLOGIC_QLE844X		0x8040
 #define PCI_DEVICE_ID_QLOGIC_VF_QLE844X	0x8440
@@ -2307,6 +2310,7 @@ static inline bool qlcnic_83xx_check(struct qlcnic_adapter *adapter)
 	bool status;
 
 	status = ((device == PCI_DEVICE_ID_QLOGIC_QLE834X) ||
+		  (device == PCI_DEVICE_ID_QLOGIC_QLE8830) ||
 		  (device == PCI_DEVICE_ID_QLOGIC_QLE844X) ||
 		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE844X) ||
 		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE834X)) ? true : false;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 476e4998ef99..840bf36b5e9d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -35,6 +35,35 @@ static void qlcnic_83xx_get_beacon_state(struct qlcnic_adapter *);
 #define QLC_SKIP_INACTIVE_PCI_REGS	7
 #define QLC_MAX_LEGACY_FUNC_SUPP	8
 
+/* 83xx Module type */
+#define QLC_83XX_MODULE_FIBRE_10GBASE_LRM	0x1 /* 10GBase-LRM */
+#define QLC_83XX_MODULE_FIBRE_10GBASE_LR	0x2 /* 10GBase-LR */
+#define QLC_83XX_MODULE_FIBRE_10GBASE_SR	0x3 /* 10GBase-SR */
+#define QLC_83XX_MODULE_DA_10GE_PASSIVE_CP	0x4 /* 10GE passive
+						     * copper(compliant)
+						     */
+#define QLC_83XX_MODULE_DA_10GE_ACTIVE_CP	0x5 /* 10GE active limiting
+						     * copper(compliant)
+						     */
+#define QLC_83XX_MODULE_DA_10GE_LEGACY_CP	0x6 /* 10GE passive copper
+						     * (legacy, best effort)
+						     */
+#define QLC_83XX_MODULE_FIBRE_1000BASE_SX	0x7 /* 1000Base-SX */
+#define QLC_83XX_MODULE_FIBRE_1000BASE_LX	0x8 /* 1000Base-LX */
+#define QLC_83XX_MODULE_FIBRE_1000BASE_CX	0x9 /* 1000Base-CX */
+#define QLC_83XX_MODULE_TP_1000BASE_T		0xa /* 1000Base-T*/
+#define QLC_83XX_MODULE_DA_1GE_PASSIVE_CP	0xb /* 1GE passive copper
+						     * (legacy, best effort)
+						     */
+#define QLC_83XX_MODULE_UNKNOWN			0xf /* Unknown module type */
+
+/* Port types */
+#define QLC_83XX_10_CAPABLE	 BIT_8
+#define QLC_83XX_100_CAPABLE	 BIT_9
+#define QLC_83XX_1G_CAPABLE	 BIT_10
+#define QLC_83XX_10G_CAPABLE	 BIT_11
+#define QLC_83XX_AUTONEG_ENABLE	 BIT_15
+
 static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = {
 	{QLCNIC_CMD_CONFIGURE_IP_ADDR, 6, 1},
 	{QLCNIC_CMD_CONFIG_INTRPT, 18, 34},
@@ -667,6 +696,7 @@ void qlcnic_83xx_write_crb(struct qlcnic_adapter *adapter, char *buf,
 
 int qlcnic_83xx_get_port_info(struct qlcnic_adapter *adapter)
 {
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	int status;
 
 	status = qlcnic_83xx_get_port_config(adapter);
@@ -674,13 +704,20 @@ int qlcnic_83xx_get_port_info(struct qlcnic_adapter *adapter)
 		dev_err(&adapter->pdev->dev,
 			"Get Port Info failed\n");
 	} else {
-		if (QLC_83XX_SFP_10G_CAPABLE(adapter->ahw->port_config))
-			adapter->ahw->port_type = QLCNIC_XGBE;
-		else
-			adapter->ahw->port_type = QLCNIC_GBE;
 
-		if (QLC_83XX_AUTONEG(adapter->ahw->port_config))
-			adapter->ahw->link_autoneg = AUTONEG_ENABLE;
+		if (ahw->port_config & QLC_83XX_10G_CAPABLE) {
+			ahw->port_type = QLCNIC_XGBE;
+		} else if (ahw->port_config & QLC_83XX_10_CAPABLE ||
+			   ahw->port_config & QLC_83XX_100_CAPABLE ||
+			   ahw->port_config & QLC_83XX_1G_CAPABLE) {
+			ahw->port_type = QLCNIC_GBE;
+		} else {
+			ahw->port_type = QLCNIC_XGBE;
+		}
+
+		if (QLC_83XX_AUTONEG(ahw->port_config))
+			ahw->link_autoneg = AUTONEG_ENABLE;
+
 	}
 	return status;
 }
@@ -2664,7 +2701,7 @@ static int qlcnic_83xx_poll_flash_status_reg(struct qlcnic_adapter *adapter)
 		    QLC_83XX_FLASH_STATUS_READY)
 			break;
 
-		msleep(QLC_83XX_FLASH_STATUS_REG_POLL_DELAY);
+		usleep_range(1000, 1100);
 	} while (--retries);
 
 	if (!retries)
@@ -3176,22 +3213,33 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
 			break;
 		}
 		config = cmd.rsp.arg[3];
-		if (QLC_83XX_SFP_PRESENT(config)) {
-			switch (ahw->module_type) {
-			case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
-			case LINKEVENT_MODULE_OPTICAL_SRLR:
-			case LINKEVENT_MODULE_OPTICAL_LRM:
-			case LINKEVENT_MODULE_OPTICAL_SFP_1G:
-				ahw->supported_type = PORT_FIBRE;
-				break;
-			case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
-			case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
-			case LINKEVENT_MODULE_TWINAX:
-				ahw->supported_type = PORT_TP;
-				break;
-			default:
-				ahw->supported_type = PORT_OTHER;
-			}
+		switch (QLC_83XX_SFP_MODULE_TYPE(config)) {
+		case QLC_83XX_MODULE_FIBRE_10GBASE_LRM:
+		case QLC_83XX_MODULE_FIBRE_10GBASE_LR:
+		case QLC_83XX_MODULE_FIBRE_10GBASE_SR:
+			ahw->supported_type = PORT_FIBRE;
+			ahw->port_type = QLCNIC_XGBE;
+			break;
+		case QLC_83XX_MODULE_FIBRE_1000BASE_SX:
+		case QLC_83XX_MODULE_FIBRE_1000BASE_LX:
+		case QLC_83XX_MODULE_FIBRE_1000BASE_CX:
+			ahw->supported_type = PORT_FIBRE;
+			ahw->port_type = QLCNIC_GBE;
+			break;
+		case QLC_83XX_MODULE_TP_1000BASE_T:
+			ahw->supported_type = PORT_TP;
+			ahw->port_type = QLCNIC_GBE;
+			break;
+		case QLC_83XX_MODULE_DA_10GE_PASSIVE_CP:
+		case QLC_83XX_MODULE_DA_10GE_ACTIVE_CP:
+		case QLC_83XX_MODULE_DA_10GE_LEGACY_CP:
+		case QLC_83XX_MODULE_DA_1GE_PASSIVE_CP:
+			ahw->supported_type = PORT_DA;
+			ahw->port_type = QLCNIC_XGBE;
+			break;
+		default:
+			ahw->supported_type = PORT_OTHER;
+			ahw->port_type = QLCNIC_XGBE;
 		}
 		if (config & 1)
 			err = 1;
@@ -3204,9 +3252,9 @@ out:
 int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
 			     struct ethtool_cmd *ecmd)
 {
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	u32 config = 0;
 	int status = 0;
-	struct qlcnic_hardware_context *ahw = adapter->ahw;
 
 	if (!test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
 		/* Get port configuration info */
@@ -3229,20 +3277,41 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
 		ecmd->autoneg = AUTONEG_DISABLE;
 	}
 
-	if (ahw->port_type == QLCNIC_XGBE) {
-		ecmd->supported = SUPPORTED_10000baseT_Full;
-		ecmd->advertising = ADVERTISED_10000baseT_Full;
+	ecmd->supported = (SUPPORTED_10baseT_Full |
+			   SUPPORTED_100baseT_Full |
+			   SUPPORTED_1000baseT_Full |
+			   SUPPORTED_10000baseT_Full |
+			   SUPPORTED_Autoneg);
+
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		if (ahw->port_config & QLC_83XX_10_CAPABLE)
+			ecmd->advertising |= SUPPORTED_10baseT_Full;
+		if (ahw->port_config & QLC_83XX_100_CAPABLE)
+			ecmd->advertising |= SUPPORTED_100baseT_Full;
+		if (ahw->port_config & QLC_83XX_1G_CAPABLE)
+			ecmd->advertising |= SUPPORTED_1000baseT_Full;
+		if (ahw->port_config & QLC_83XX_10G_CAPABLE)
+			ecmd->advertising |= SUPPORTED_10000baseT_Full;
+		if (ahw->port_config & QLC_83XX_AUTONEG_ENABLE)
+			ecmd->advertising |= ADVERTISED_Autoneg;
 	} else {
-		ecmd->supported = (SUPPORTED_10baseT_Half |
-				   SUPPORTED_10baseT_Full |
-				   SUPPORTED_100baseT_Half |
-				   SUPPORTED_100baseT_Full |
-				   SUPPORTED_1000baseT_Half |
-				   SUPPORTED_1000baseT_Full);
-		ecmd->advertising = (ADVERTISED_100baseT_Half |
-				     ADVERTISED_100baseT_Full |
-				     ADVERTISED_1000baseT_Half |
-				     ADVERTISED_1000baseT_Full);
+		switch (ahw->link_speed) {
+		case SPEED_10:
+			ecmd->advertising = SUPPORTED_10baseT_Full;
+			break;
+		case SPEED_100:
+			ecmd->advertising = SUPPORTED_100baseT_Full;
+			break;
+		case SPEED_1000:
+			ecmd->advertising = SUPPORTED_1000baseT_Full;
+			break;
+		case SPEED_10000:
+			ecmd->advertising = SUPPORTED_10000baseT_Full;
+			break;
+		default:
+			break;
+		}
+
 	}
 
 	switch (ahw->supported_type) {
@@ -3258,6 +3327,12 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
 		ecmd->port = PORT_TP;
 		ecmd->transceiver = XCVR_INTERNAL;
 		break;
+	case PORT_DA:
+		ecmd->supported |= SUPPORTED_FIBRE;
+		ecmd->advertising |= ADVERTISED_FIBRE;
+		ecmd->port = PORT_DA;
+		ecmd->transceiver = XCVR_EXTERNAL;
+		break;
 	default:
 		ecmd->supported |= SUPPORTED_FIBRE;
 		ecmd->advertising |= ADVERTISED_FIBRE;
@@ -3272,35 +3347,60 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
 int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter,
 			     struct ethtool_cmd *ecmd)
 {
-	int status = 0;
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	u32 config = adapter->ahw->port_config;
+	int status = 0;
 
-	if (ecmd->autoneg)
-		adapter->ahw->port_config |= BIT_15;
-
-	switch (ethtool_cmd_speed(ecmd)) {
-	case SPEED_10:
-		adapter->ahw->port_config |= BIT_8;
-		break;
-	case SPEED_100:
-		adapter->ahw->port_config |= BIT_9;
-		break;
-	case SPEED_1000:
-		adapter->ahw->port_config |= BIT_10;
-		break;
-	case SPEED_10000:
-		adapter->ahw->port_config |= BIT_11;
-		break;
-	default:
-		return -EINVAL;
+	/* 83xx devices do not support Half duplex */
+	if (ecmd->duplex == DUPLEX_HALF) {
+			netdev_info(adapter->netdev,
+				    "Half duplex mode not supported\n");
+			return -EINVAL;
 	}
 
+	if (ecmd->autoneg) {
+		ahw->port_config |= QLC_83XX_AUTONEG_ENABLE;
+		ahw->port_config |= (QLC_83XX_100_CAPABLE |
+				     QLC_83XX_1G_CAPABLE |
+				     QLC_83XX_10G_CAPABLE);
+	} else { /* force speed */
+		ahw->port_config &= ~QLC_83XX_AUTONEG_ENABLE;
+		switch (ethtool_cmd_speed(ecmd)) {
+		case SPEED_10:
+			ahw->port_config &= ~(QLC_83XX_100_CAPABLE |
+					      QLC_83XX_1G_CAPABLE |
+					      QLC_83XX_10G_CAPABLE);
+			ahw->port_config |= QLC_83XX_10_CAPABLE;
+			break;
+		case SPEED_100:
+			ahw->port_config &= ~(QLC_83XX_10_CAPABLE |
+					      QLC_83XX_1G_CAPABLE |
+					      QLC_83XX_10G_CAPABLE);
+			ahw->port_config |= QLC_83XX_100_CAPABLE;
+			break;
+		case SPEED_1000:
+			ahw->port_config &= ~(QLC_83XX_10_CAPABLE |
+					      QLC_83XX_100_CAPABLE |
+					      QLC_83XX_10G_CAPABLE);
+			ahw->port_config |= QLC_83XX_1G_CAPABLE;
+			break;
+		case SPEED_10000:
+			ahw->port_config &= ~(QLC_83XX_10_CAPABLE |
+					      QLC_83XX_100_CAPABLE |
+					      QLC_83XX_1G_CAPABLE);
+			ahw->port_config |= QLC_83XX_10G_CAPABLE;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
 	status = qlcnic_83xx_set_port_config(adapter);
 	if (status) {
-		dev_info(&adapter->pdev->dev,
-			 "Failed to Set Link Speed and autoneg.\n");
-		adapter->ahw->port_config = config;
+		netdev_info(adapter->netdev,
+			    "Failed to Set Link Speed and autoneg.\n");
+		ahw->port_config = config;
 	}
+
 	return status;
 }
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index 2bf101a47d02..f3346a3779d3 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -83,6 +83,7 @@
 /* Firmware image definitions */
 #define QLC_83XX_BOOTLOADER_FLASH_ADDR	0x10000
 #define QLC_83XX_FW_FILE_NAME		"83xx_fw.bin"
+#define QLC_83XX_POST_FW_FILE_NAME	"83xx_post_fw.bin"
 #define QLC_84XX_FW_FILE_NAME		"84xx_fw.bin"
 #define QLC_83XX_BOOT_FROM_FLASH	0
 #define QLC_83XX_BOOT_FROM_FILE		0x12345678
@@ -360,7 +361,6 @@ enum qlcnic_83xx_states {
 #define QLC_83XX_SFP_MODULE_TYPE(data)		(((data) >> 4) & 0x1F)
 #define QLC_83XX_SFP_CU_LENGTH(data)		(LSB((data) >> 16))
 #define QLC_83XX_SFP_TX_FAULT(data)		((data) & BIT_10)
-#define QLC_83XX_SFP_10G_CAPABLE(data)		((data) & BIT_11)
 #define QLC_83XX_LINK_STATS(data)		((data) & BIT_0)
 #define QLC_83XX_CURRENT_LINK_SPEED(data)	(((data) >> 3) & 7)
 #define QLC_83XX_LINK_PAUSE(data)		(((data) >> 6) & 3)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 3172cdf591fe..2bb48d57e7a5 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2074,6 +2074,121 @@ static void qlcnic_83xx_init_hw(struct qlcnic_adapter *p_dev)
 		dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
 }
 
+/* POST FW related definations*/
+#define QLC_83XX_POST_SIGNATURE_REG	0x41602014
+#define QLC_83XX_POST_MODE_REG		0x41602018
+#define QLC_83XX_POST_FAST_MODE		0
+#define QLC_83XX_POST_MEDIUM_MODE	1
+#define QLC_83XX_POST_SLOW_MODE		2
+
+/* POST Timeout values in milliseconds */
+#define QLC_83XX_POST_FAST_MODE_TIMEOUT	690
+#define QLC_83XX_POST_MED_MODE_TIMEOUT	2930
+#define QLC_83XX_POST_SLOW_MODE_TIMEOUT	7500
+
+/* POST result values */
+#define QLC_83XX_POST_PASS			0xfffffff0
+#define QLC_83XX_POST_ASIC_STRESS_TEST_FAIL	0xffffffff
+#define QLC_83XX_POST_DDR_TEST_FAIL		0xfffffffe
+#define QLC_83XX_POST_ASIC_MEMORY_TEST_FAIL	0xfffffffc
+#define QLC_83XX_POST_FLASH_TEST_FAIL		0xfffffff8
+
+static int qlcnic_83xx_run_post(struct qlcnic_adapter *adapter)
+{
+	struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info;
+	struct device *dev = &adapter->pdev->dev;
+	int timeout, count, ret = 0;
+	u32 signature;
+
+	/* Set timeout values with extra 2 seconds of buffer */
+	switch (adapter->ahw->post_mode) {
+	case QLC_83XX_POST_FAST_MODE:
+		timeout = QLC_83XX_POST_FAST_MODE_TIMEOUT + 2000;
+		break;
+	case QLC_83XX_POST_MEDIUM_MODE:
+		timeout = QLC_83XX_POST_MED_MODE_TIMEOUT + 2000;
+		break;
+	case QLC_83XX_POST_SLOW_MODE:
+		timeout = QLC_83XX_POST_SLOW_MODE_TIMEOUT + 2000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	strncpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
+		QLC_FW_FILE_NAME_LEN);
+
+	ret = request_firmware(&fw_info->fw, fw_info->fw_file_name, dev);
+	if (ret) {
+		dev_err(dev, "POST firmware can not be loaded, skipping POST\n");
+		return 0;
+	}
+
+	ret = qlcnic_83xx_copy_fw_file(adapter);
+	if (ret)
+		return ret;
+
+	/* clear QLC_83XX_POST_SIGNATURE_REG register */
+	qlcnic_ind_wr(adapter, QLC_83XX_POST_SIGNATURE_REG, 0);
+
+	/* Set POST mode */
+	qlcnic_ind_wr(adapter, QLC_83XX_POST_MODE_REG,
+		      adapter->ahw->post_mode);
+
+	QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID,
+			    QLC_83XX_BOOT_FROM_FILE);
+
+	qlcnic_83xx_start_hw(adapter);
+
+	count = 0;
+	do {
+		msleep(100);
+		count += 100;
+
+		signature = qlcnic_ind_rd(adapter, QLC_83XX_POST_SIGNATURE_REG);
+		if (signature == QLC_83XX_POST_PASS)
+			break;
+	} while (timeout > count);
+
+	if (timeout <= count) {
+		dev_err(dev, "POST timed out, signature = 0x%08x\n", signature);
+		return -EIO;
+	}
+
+	switch (signature) {
+	case QLC_83XX_POST_PASS:
+		dev_info(dev, "POST passed, Signature = 0x%08x\n", signature);
+		break;
+	case QLC_83XX_POST_ASIC_STRESS_TEST_FAIL:
+		dev_err(dev, "POST failed, Test case : ASIC STRESS TEST, Signature = 0x%08x\n",
+			signature);
+		ret = -EIO;
+		break;
+	case QLC_83XX_POST_DDR_TEST_FAIL:
+		dev_err(dev, "POST failed, Test case : DDT TEST, Signature = 0x%08x\n",
+			signature);
+		ret = -EIO;
+		break;
+	case QLC_83XX_POST_ASIC_MEMORY_TEST_FAIL:
+		dev_err(dev, "POST failed, Test case : ASIC MEMORY TEST, Signature = 0x%08x\n",
+			signature);
+		ret = -EIO;
+		break;
+	case QLC_83XX_POST_FLASH_TEST_FAIL:
+		dev_err(dev, "POST failed, Test case : FLASH TEST, Signature = 0x%08x\n",
+			signature);
+		ret = -EIO;
+		break;
+	default:
+		dev_err(dev, "POST failed, Test case : INVALID, Signature = 0x%08x\n",
+			signature);
+		ret = -EIO;
+		break;
+	}
+
+	return ret;
+}
+
 static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter)
 {
 	struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info;
@@ -2118,8 +2233,27 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter)
 
 	if (qlcnic_83xx_copy_bootloader(adapter))
 		return err;
+
+	/* Check if POST needs to be run */
+	if (adapter->ahw->run_post) {
+		err = qlcnic_83xx_run_post(adapter);
+		if (err)
+			return err;
+
+		/* No need to run POST in next reset sequence */
+		adapter->ahw->run_post = false;
+
+		/* Again reset the adapter to load regular firmware  */
+		qlcnic_83xx_stop_hw(adapter);
+		qlcnic_83xx_init_hw(adapter);
+
+		err = qlcnic_83xx_copy_bootloader(adapter);
+		if (err)
+			return err;
+	}
+
 	/* Boot either flash image or firmware image from host file system */
-	if (qlcnic_load_fw_file) {
+	if (qlcnic_load_fw_file == 1) {
 		if (qlcnic_83xx_load_fw_image_from_host(adapter))
 			return err;
 	} else {
@@ -2283,6 +2417,7 @@ static int qlcnic_83xx_get_fw_info(struct qlcnic_adapter *adapter)
 		fw_info = ahw->fw_info;
 		switch (pdev->device) {
 		case PCI_DEVICE_ID_QLOGIC_QLE834X:
+		case PCI_DEVICE_ID_QLOGIC_QLE8830:
 			strncpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME,
 				QLC_FW_FILE_NAME_LEN);
 			break;
@@ -2327,6 +2462,25 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac)
 	adapter->rx_mac_learn = false;
 	ahw->msix_supported = !!qlcnic_use_msi_x;
 
+	/* Check if POST needs to be run */
+	switch (qlcnic_load_fw_file) {
+	case 2:
+		ahw->post_mode = QLC_83XX_POST_FAST_MODE;
+		ahw->run_post = true;
+		break;
+	case 3:
+		ahw->post_mode = QLC_83XX_POST_MEDIUM_MODE;
+		ahw->run_post = true;
+		break;
+	case 4:
+		ahw->post_mode = QLC_83XX_POST_SLOW_MODE;
+		ahw->run_post = true;
+		break;
+	default:
+		ahw->run_post = false;
+		break;
+	}
+
 	qlcnic_83xx_init_rings(adapter);
 
 	err = qlcnic_83xx_init_mailbox_work(adapter);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 03cd4c3d7835..69b46c051cc0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -341,7 +341,7 @@ qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg)
 			}
 			return -EIO;
 		}
-		msleep(1);
+		usleep_range(1000, 1500);
 	}
 
 	if (id_reg)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index c4262c23ed7c..be41e4c77b65 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -537,7 +537,7 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter)
 	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_3 + 0xc, 0);
 	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x8, 0);
 	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0xc, 0);
-	msleep(1);
+	usleep_range(1000, 1500);
 
 	QLC_SHARED_REG_WR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
 	QLC_SHARED_REG_WR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);
@@ -1198,7 +1198,7 @@ qlcnic_load_firmware(struct qlcnic_adapter *adapter)
 			flashaddr += 8;
 		}
 	}
-	msleep(1);
+	usleep_range(1000, 1500);
 
 	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x18, 0x1020);
 	QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0x80001e);
@@ -1295,7 +1295,7 @@ next:
 		rc = qlcnic_validate_firmware(adapter);
 		if (rc != 0) {
 			release_firmware(adapter->fw);
-			msleep(1);
+			usleep_range(1000, 1500);
 			goto next;
 		}
 	}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index e45bf09af0c9..18e5de72e9b4 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -1753,7 +1753,7 @@ qlcnic_83xx_process_rcv(struct qlcnic_adapter *adapter,
 
 	if (qlcnic_encap_length(sts_data[1]) &&
 	    skb->ip_summed == CHECKSUM_UNNECESSARY) {
-		skb->encapsulation = 1;
+		skb->csum_level = 1;
 		adapter->stats.encap_rx_csummed++;
 	}
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index cf08b2de071e..f5e29f7bdae3 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled)");
 module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644);
 
 int qlcnic_load_fw_file;
-MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file)");
+MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file, 2=POST in fast mode, 3= POST in medium mode, 4=POST in slow mode)");
 module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444);
 
 static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -111,6 +111,7 @@ static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter)
 static const struct pci_device_id qlcnic_pci_tbl[] = {
 	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE824X),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE834X),
+	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE8830),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_VF_QLE834X),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE844X),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_VF_QLE844X),
@@ -228,6 +229,11 @@ static const struct qlcnic_board_info qlcnic_boards[] = {
 	  PCI_DEVICE_ID_QLOGIC_QLE834X,
 	  0x0, 0x0, "8300 Series 1/10GbE Controller" },
 	{ PCI_VENDOR_ID_QLOGIC,
+	  PCI_DEVICE_ID_QLOGIC_QLE8830,
+	  0x0,
+	  0x0,
+	  "8830 Series 1/10GbE Controller" },
+	{ PCI_VENDOR_ID_QLOGIC,
 	  PCI_DEVICE_ID_QLOGIC_QLE824X,
 	  PCI_VENDOR_ID_QLOGIC,
 	  0x203,
@@ -1131,6 +1137,7 @@ static void qlcnic_get_bar_length(u32 dev_id, ulong *bar)
 		*bar = QLCNIC_82XX_BAR0_LENGTH;
 		break;
 	case PCI_DEVICE_ID_QLOGIC_QLE834X:
+	case PCI_DEVICE_ID_QLOGIC_QLE8830:
 	case PCI_DEVICE_ID_QLOGIC_QLE844X:
 	case PCI_DEVICE_ID_QLOGIC_VF_QLE834X:
 	case PCI_DEVICE_ID_QLOGIC_VF_QLE844X:
@@ -2474,6 +2481,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ahw->reg_tbl = (u32 *) qlcnic_reg_tbl;
 		break;
 	case PCI_DEVICE_ID_QLOGIC_QLE834X:
+	case PCI_DEVICE_ID_QLOGIC_QLE8830:
 	case PCI_DEVICE_ID_QLOGIC_QLE844X:
 		qlcnic_83xx_register_map(ahw);
 		break;
diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index 3e96f269150d..6c904a6cad2a 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -1922,7 +1922,7 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 			sbq_desc->p.skb = NULL;
 			skb_reserve(skb, NET_IP_ALIGN);
 		}
-		while (length > 0) {
+		do {
 			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
 			size = (length < rx_ring->lbq_buf_size) ? length :
 				rx_ring->lbq_buf_size;
@@ -1939,7 +1939,7 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 			skb->truesize += size;
 			length -= size;
 			i++;
-		}
+		} while (length > 0);
 		ql_update_mac_hdr_len(qdev, ib_mac_rsp, lbq_desc->p.pg_chunk.va,
 				      &hlen);
 		__pskb_pull_tail(skb, hlen);