diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-05-15 21:46:41 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-11 16:28:56 -0700 |
commit | ef7f54297df683665145859501f63c801f6c7ea8 (patch) | |
tree | b41a8cc3d8b786984859e0ba483ddbe796314ff7 /drivers/net/ethernet/tehuti | |
parent | ded19addf9c937d83b9bfb4d73a836732569041b (diff) | |
download | linux-stable-ef7f54297df683665145859501f63c801f6c7ea8.tar.gz linux-stable-ef7f54297df683665145859501f63c801f6c7ea8.tar.bz2 linux-stable-ef7f54297df683665145859501f63c801f6c7ea8.zip |
tehuti: Move the Tehuti driver
Move the Tehuti driver into drivers/net/ethernet/tehuti/ and
make the necessary Kconfig and Makefile changes.
CC: Alexander Indenbaum <baum@tehutinetworks.net>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/tehuti')
-rw-r--r-- | drivers/net/ethernet/tehuti/Kconfig | 26 | ||||
-rw-r--r-- | drivers/net/ethernet/tehuti/Makefile | 5 | ||||
-rw-r--r-- | drivers/net/ethernet/tehuti/tehuti.c | 2470 | ||||
-rw-r--r-- | drivers/net/ethernet/tehuti/tehuti.h | 561 |
4 files changed, 3062 insertions, 0 deletions
diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig new file mode 100644 index 000000000000..914ad4059eae --- /dev/null +++ b/drivers/net/ethernet/tehuti/Kconfig @@ -0,0 +1,26 @@ +# +# Tehuti network device configuration +# + +config NET_VENDOR_TEHUTI + bool "Tehuti devices" + depends on PCI + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Tehuti cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_TEHUTI + +config TEHUTI + tristate "Tehuti Networks 10G Ethernet" + depends on PCI + ---help--- + Tehuti Networks 10G Ethernet NIC + +endif # NET_VENDOR_TEHUTI diff --git a/drivers/net/ethernet/tehuti/Makefile b/drivers/net/ethernet/tehuti/Makefile new file mode 100644 index 000000000000..f995421ddbc8 --- /dev/null +++ b/drivers/net/ethernet/tehuti/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Tehuti network device drivers. +# + +obj-$(CONFIG_TEHUTI) += tehuti.o diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c new file mode 100644 index 000000000000..749bbf18dc6a --- /dev/null +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -0,0 +1,2470 @@ +/* + * Tehuti Networks(R) Network Driver + * ethtool interface implementation + * Copyright (C) 2007 Tehuti Networks Ltd. All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * RX HW/SW interaction overview + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * There are 2 types of RX communication channels between driver and NIC. + * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming + * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds + * info about buffer's location, size and ID. An ID field is used to identify a + * buffer when it's returned with data via RXD Fifo (see below) + * 2) RX Data Fifo - RXD - holds descriptors of full buffers. This Fifo is + * filled by HW and is readen by SW. Each descriptor holds status and ID. + * HW pops descriptor from RXF Fifo, stores ID, fills buffer with incoming data, + * via dma moves it into host memory, builds new RXD descriptor with same ID, + * pushes it into RXD Fifo and raises interrupt to indicate new RX data. + * + * Current NIC configuration (registers + firmware) makes NIC use 2 RXF Fifos. + * One holds 1.5K packets and another - 26K packets. Depending on incoming + * packet size, HW desides on a RXF Fifo to pop buffer from. When packet is + * filled with data, HW builds new RXD descriptor for it and push it into single + * RXD Fifo. + * + * RX SW Data Structures + * ~~~~~~~~~~~~~~~~~~~~~ + * skb db - used to keep track of all skbs owned by SW and their dma addresses. + * For RX case, ownership lasts from allocating new empty skb for RXF until + * accepting full skb from RXD and passing it to OS. Each RXF Fifo has its own + * skb db. Implemented as array with bitmask. + * fifo - keeps info about fifo's size and location, relevant HW registers, + * usage and skb db. Each RXD and RXF Fifo has its own fifo structure. + * Implemented as simple struct. + * + * RX SW Execution Flow + * ~~~~~~~~~~~~~~~~~~~~ + * Upon initialization (ifconfig up) driver creates RX fifos and initializes + * relevant registers. At the end of init phase, driver enables interrupts. + * NIC sees that there is no RXF buffers and raises + * RD_INTR interrupt, isr fills skbs and Rx begins. + * Driver has two receive operation modes: + * NAPI - interrupt-driven mixed with polling + * interrupt-driven only + * + * Interrupt-driven only flow is following. When buffer is ready, HW raises + * interrupt and isr is called. isr collects all available packets + * (bdx_rx_receive), refills skbs (bdx_rx_alloc_skbs) and exit. + + * Rx buffer allocation note + * ~~~~~~~~~~~~~~~~~~~~~~~~~ + * Driver cares to feed such amount of RxF descriptors that respective amount of + * RxD descriptors can not fill entire RxD fifo. The main reason is lack of + * overflow check in Bordeaux for RxD fifo free/used size. + * FIXME: this is NOT fully implemented, more work should be done + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "tehuti.h" + +static DEFINE_PCI_DEVICE_TABLE(bdx_pci_tbl) = { + {0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x1FC9, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x1FC9, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, bdx_pci_tbl); + +/* Definitions needed by ISR or NAPI functions */ +static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f); +static void bdx_tx_cleanup(struct bdx_priv *priv); +static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget); + +/* Definitions needed by FW loading */ +static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size); + +/* Definitions needed by hw_start */ +static int bdx_tx_init(struct bdx_priv *priv); +static int bdx_rx_init(struct bdx_priv *priv); + +/* Definitions needed by bdx_close */ +static void bdx_rx_free(struct bdx_priv *priv); +static void bdx_tx_free(struct bdx_priv *priv); + +/* Definitions needed by bdx_probe */ +static void bdx_set_ethtool_ops(struct net_device *netdev); + +/************************************************************************* + * Print Info * + *************************************************************************/ + +static void print_hw_id(struct pci_dev *pdev) +{ + struct pci_nic *nic = pci_get_drvdata(pdev); + u16 pci_link_status = 0; + u16 pci_ctrl = 0; + + pci_read_config_word(pdev, PCI_LINK_STATUS_REG, &pci_link_status); + pci_read_config_word(pdev, PCI_DEV_CTRL_REG, &pci_ctrl); + + pr_info("%s%s\n", BDX_NIC_NAME, + nic->port_num == 1 ? "" : ", 2-Port"); + pr_info("srom 0x%x fpga %d build %u lane# %d max_pl 0x%x mrrs 0x%x\n", + readl(nic->regs + SROM_VER), readl(nic->regs + FPGA_VER) & 0xFFF, + readl(nic->regs + FPGA_SEED), + GET_LINK_STATUS_LANES(pci_link_status), + GET_DEV_CTRL_MAXPL(pci_ctrl), GET_DEV_CTRL_MRRS(pci_ctrl)); +} + +static void print_fw_id(struct pci_nic *nic) +{ + pr_info("fw 0x%x\n", readl(nic->regs + FW_VER)); +} + +static void print_eth_id(struct net_device *ndev) +{ + netdev_info(ndev, "%s, Port %c\n", + BDX_NIC_NAME, (ndev->if_port == 0) ? 'A' : 'B'); + +} + +/************************************************************************* + * Code * + *************************************************************************/ + +#define bdx_enable_interrupts(priv) \ + do { WRITE_REG(priv, regIMR, IR_RUN); } while (0) +#define bdx_disable_interrupts(priv) \ + do { WRITE_REG(priv, regIMR, 0); } while (0) + +/* bdx_fifo_init + * create TX/RX descriptor fifo for host-NIC communication. + * 1K extra space is allocated at the end of the fifo to simplify + * processing of descriptors that wraps around fifo's end + * @priv - NIC private structure + * @f - fifo to initialize + * @fsz_type - fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB + * @reg_XXX - offsets of registers relative to base address + * + * Returns 0 on success, negative value on failure + * + */ +static int +bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type, + u16 reg_CFG0, u16 reg_CFG1, u16 reg_RPTR, u16 reg_WPTR) +{ + u16 memsz = FIFO_SIZE * (1 << fsz_type); + + memset(f, 0, sizeof(struct fifo)); + /* pci_alloc_consistent gives us 4k-aligned memory */ + f->va = pci_alloc_consistent(priv->pdev, + memsz + FIFO_EXTRA_SPACE, &f->da); + if (!f->va) { + pr_err("pci_alloc_consistent failed\n"); + RET(-ENOMEM); + } + f->reg_CFG0 = reg_CFG0; + f->reg_CFG1 = reg_CFG1; + f->reg_RPTR = reg_RPTR; + f->reg_WPTR = reg_WPTR; + f->rptr = 0; + f->wptr = 0; + f->memsz = memsz; + f->size_mask = memsz - 1; + WRITE_REG(priv, reg_CFG0, (u32) ((f->da & TX_RX_CFG0_BASE) | fsz_type)); + WRITE_REG(priv, reg_CFG1, H32_64(f->da)); + + RET(0); +} + +/* bdx_fifo_free - free all resources used by fifo + * @priv - NIC private structure + * @f - fifo to release + */ +static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f) +{ + ENTER; + if (f->va) { + pci_free_consistent(priv->pdev, + f->memsz + FIFO_EXTRA_SPACE, f->va, f->da); + f->va = NULL; + } + RET(); +} + +/* + * bdx_link_changed - notifies OS about hw link state. + * @bdx_priv - hw adapter structure + */ +static void bdx_link_changed(struct bdx_priv *priv) +{ + u32 link = READ_REG(priv, regMAC_LNK_STAT) & MAC_LINK_STAT; + + if (!link) { + if (netif_carrier_ok(priv->ndev)) { + netif_stop_queue(priv->ndev); + netif_carrier_off(priv->ndev); + netdev_err(priv->ndev, "Link Down\n"); + } + } else { + if (!netif_carrier_ok(priv->ndev)) { + netif_wake_queue(priv->ndev); + netif_carrier_on(priv->ndev); + netdev_err(priv->ndev, "Link Up\n"); + } + } +} + +static void bdx_isr_extra(struct bdx_priv *priv, u32 isr) +{ + if (isr & IR_RX_FREE_0) { + bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0); + DBG("RX_FREE_0\n"); + } + + if (isr & IR_LNKCHG0) + bdx_link_changed(priv); + + if (isr & IR_PCIE_LINK) + netdev_err(priv->ndev, "PCI-E Link Fault\n"); + + if (isr & IR_PCIE_TOUT) + netdev_err(priv->ndev, "PCI-E Time Out\n"); + +} + +/* bdx_isr - Interrupt Service Routine for Bordeaux NIC + * @irq - interrupt number + * @ndev - network device + * @regs - CPU registers + * + * Return IRQ_NONE if it was not our interrupt, IRQ_HANDLED - otherwise + * + * It reads ISR register to know interrupt reasons, and proceed them one by one. + * Reasons of interest are: + * RX_DESC - new packet has arrived and RXD fifo holds its descriptor + * RX_FREE - number of free Rx buffers in RXF fifo gets low + * TX_FREE - packet was transmited and RXF fifo holds its descriptor + */ + +static irqreturn_t bdx_isr_napi(int irq, void *dev) +{ + struct net_device *ndev = dev; + struct bdx_priv *priv = netdev_priv(ndev); + u32 isr; + + ENTER; + isr = (READ_REG(priv, regISR) & IR_RUN); + if (unlikely(!isr)) { + bdx_enable_interrupts(priv); + return IRQ_NONE; /* Not our interrupt */ + } + + if (isr & IR_EXTRA) + bdx_isr_extra(priv, isr); + + if (isr & (IR_RX_DESC_0 | IR_TX_FREE_0)) { + if (likely(napi_schedule_prep(&priv->napi))) { + __napi_schedule(&priv->napi); + RET(IRQ_HANDLED); + } else { + /* NOTE: we get here if intr has slipped into window + * between these lines in bdx_poll: + * bdx_enable_interrupts(priv); + * return 0; + * currently intrs are disabled (since we read ISR), + * and we have failed to register next poll. + * so we read the regs to trigger chip + * and allow further interupts. */ + READ_REG(priv, regTXF_WPTR_0); + READ_REG(priv, regRXD_WPTR_0); + } + } + + bdx_enable_interrupts(priv); + RET(IRQ_HANDLED); +} + +static int bdx_poll(struct napi_struct *napi, int budget) +{ + struct bdx_priv *priv = container_of(napi, struct bdx_priv, napi); + int work_done; + + ENTER; + bdx_tx_cleanup(priv); + work_done = bdx_rx_receive(priv, &priv->rxd_fifo0, budget); + if ((work_done < budget) || + (priv->napi_stop++ >= 30)) { + DBG("rx poll is done. backing to isr-driven\n"); + + /* from time to time we exit to let NAPI layer release + * device lock and allow waiting tasks (eg rmmod) to advance) */ + priv->napi_stop = 0; + + napi_complete(napi); + bdx_enable_interrupts(priv); + } + return work_done; +} + +/* bdx_fw_load - loads firmware to NIC + * @priv - NIC private structure + * Firmware is loaded via TXD fifo, so it must be initialized first. + * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC + * can have few of them). So all drivers use semaphore register to choose one + * that will actually load FW to NIC. + */ + +static int bdx_fw_load(struct bdx_priv *priv) +{ + const struct firmware *fw = NULL; + int master, i; + int rc; + + ENTER; + master = READ_REG(priv, regINIT_SEMAPHORE); + if (!READ_REG(priv, regINIT_STATUS) && master) { + rc = request_firmware(&fw, "tehuti/bdx.bin", &priv->pdev->dev); + if (rc) + goto out; + bdx_tx_push_desc_safe(priv, (char *)fw->data, fw->size); + mdelay(100); + } + for (i = 0; i < 200; i++) { + if (READ_REG(priv, regINIT_STATUS)) { + rc = 0; + goto out; + } + mdelay(2); + } + rc = -EIO; +out: + if (master) + WRITE_REG(priv, regINIT_SEMAPHORE, 1); + if (fw) + release_firmware(fw); + + if (rc) { + netdev_err(priv->ndev, "firmware loading failed\n"); + if (rc == -EIO) + DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n", + READ_REG(priv, regVPC), + READ_REG(priv, regVIC), + READ_REG(priv, regINIT_STATUS), i); + RET(rc); + } else { + DBG("%s: firmware loading success\n", priv->ndev->name); + RET(0); + } +} + +static void bdx_restore_mac(struct net_device *ndev, struct bdx_priv *priv) +{ + u32 val; + + ENTER; + DBG("mac0=%x mac1=%x mac2=%x\n", + READ_REG(priv, regUNC_MAC0_A), + READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A)); + + val = (ndev->dev_addr[0] << 8) | (ndev->dev_addr[1]); + WRITE_REG(priv, regUNC_MAC2_A, val); + val = (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]); + WRITE_REG(priv, regUNC_MAC1_A, val); + val = (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]); + WRITE_REG(priv, regUNC_MAC0_A, val); + + DBG("mac0=%x mac1=%x mac2=%x\n", + READ_REG(priv, regUNC_MAC0_A), + READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A)); + RET(); +} + +/* bdx_hw_start - inits registers and starts HW's Rx and Tx engines + * @priv - NIC private structure + */ +static int bdx_hw_start(struct bdx_priv *priv) +{ + int rc = -EIO; + struct net_device *ndev = priv->ndev; + + ENTER; + bdx_link_changed(priv); + + /* 10G overall max length (vlan, eth&ip header, ip payload, crc) */ + WRITE_REG(priv, regFRM_LENGTH, 0X3FE0); + WRITE_REG(priv, regPAUSE_QUANT, 0x96); + WRITE_REG(priv, regRX_FIFO_SECTION, 0x800010); + WRITE_REG(priv, regTX_FIFO_SECTION, 0xE00010); + WRITE_REG(priv, regRX_FULLNESS, 0); + WRITE_REG(priv, regTX_FULLNESS, 0); + WRITE_REG(priv, regCTRLST, + regCTRLST_BASE | regCTRLST_RX_ENA | regCTRLST_TX_ENA); + + WRITE_REG(priv, regVGLB, 0); + WRITE_REG(priv, regMAX_FRAME_A, + priv->rxf_fifo0.m.pktsz & MAX_FRAME_AB_VAL); + + DBG("RDINTCM=%08x\n", priv->rdintcm); /*NOTE: test script uses this */ + WRITE_REG(priv, regRDINTCM0, priv->rdintcm); + WRITE_REG(priv, regRDINTCM2, 0); /*cpu_to_le32(rcm.val)); */ + + DBG("TDINTCM=%08x\n", priv->tdintcm); /*NOTE: test script uses this */ + WRITE_REG(priv, regTDINTCM0, priv->tdintcm); /* old val = 0x300064 */ + + /* Enable timer interrupt once in 2 secs. */ + /*WRITE_REG(priv, regGTMR0, ((GTMR_SEC * 2) & GTMR_DATA)); */ + bdx_restore_mac(priv->ndev, priv); + + WRITE_REG(priv, regGMAC_RXF_A, GMAC_RX_FILTER_OSEN | + GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB); + +#define BDX_IRQ_TYPE ((priv->nic->irq_type == IRQ_MSI) ? 0 : IRQF_SHARED) + + rc = request_irq(priv->pdev->irq, bdx_isr_napi, BDX_IRQ_TYPE, + ndev->name, ndev); + if (rc) + goto err_irq; + bdx_enable_interrupts(priv); + + RET(0); + +err_irq: + RET(rc); +} + +static void bdx_hw_stop(struct bdx_priv *priv) +{ + ENTER; + bdx_disable_interrupts(priv); + free_irq(priv->pdev->irq, priv->ndev); + + netif_carrier_off(priv->ndev); + netif_stop_queue(priv->ndev); + + RET(); +} + +static int bdx_hw_reset_direct(void __iomem *regs) +{ + u32 val, i; + ENTER; + + /* reset sequences: read, write 1, read, write 0 */ + val = readl(regs + regCLKPLL); + writel((val | CLKPLL_SFTRST) + 0x8, regs + regCLKPLL); + udelay(50); + val = readl(regs + regCLKPLL); + writel(val & ~CLKPLL_SFTRST, regs + regCLKPLL); + + /* check that the PLLs are locked and reset ended */ + for (i = 0; i < 70; i++, mdelay(10)) + if ((readl(regs + regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) { + /* do any PCI-E read transaction */ + readl(regs + regRXD_CFG0_0); + return 0; + } + pr_err("HW reset failed\n"); + return 1; /* failure */ +} + +static int bdx_hw_reset(struct bdx_priv *priv) +{ + u32 val, i; + ENTER; + + if (priv->port == 0) { + /* reset sequences: read, write 1, read, write 0 */ + val = READ_REG(priv, regCLKPLL); + WRITE_REG(priv, regCLKPLL, (val | CLKPLL_SFTRST) + 0x8); + udelay(50); + val = READ_REG(priv, regCLKPLL); + WRITE_REG(priv, regCLKPLL, val & ~CLKPLL_SFTRST); + } + /* check that the PLLs are locked and reset ended */ + for (i = 0; i < 70; i++, mdelay(10)) + if ((READ_REG(priv, regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) { + /* do any PCI-E read transaction */ + READ_REG(priv, regRXD_CFG0_0); + return 0; + } + pr_err("HW reset failed\n"); + return 1; /* failure */ +} + +static int bdx_sw_reset(struct bdx_priv *priv) +{ + int i; + + ENTER; + /* 1. load MAC (obsolete) */ + /* 2. disable Rx (and Tx) */ + WRITE_REG(priv, regGMAC_RXF_A, 0); + mdelay(100); + /* 3. disable port */ + WRITE_REG(priv, regDIS_PORT, 1); + /* 4. disable queue */ + WRITE_REG(priv, regDIS_QU, 1); + /* 5. wait until hw is disabled */ + for (i = 0; i < 50; i++) { + if (READ_REG(priv, regRST_PORT) & 1) + break; + mdelay(10); + } + if (i == 50) + netdev_err(priv->ndev, "SW reset timeout. continuing anyway\n"); + + /* 6. disable intrs */ + WRITE_REG(priv, regRDINTCM0, 0); + WRITE_REG(priv, regTDINTCM0, 0); + WRITE_REG(priv, regIMR, 0); + READ_REG(priv, regISR); + + /* 7. reset queue */ + WRITE_REG(priv, regRST_QU, 1); + /* 8. reset port */ + WRITE_REG(priv, regRST_PORT, 1); + /* 9. zero all read and write pointers */ + for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10) + DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR); + for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10) + WRITE_REG(priv, i, 0); + /* 10. unseet port disable */ + WRITE_REG(priv, regDIS_PORT, 0); + /* 11. unset queue disable */ + WRITE_REG(priv, regDIS_QU, 0); + /* 12. unset queue reset */ + WRITE_REG(priv, regRST_QU, 0); + /* 13. unset port reset */ + WRITE_REG(priv, regRST_PORT, 0); + /* 14. enable Rx */ + /* skiped. will be done later */ + /* 15. save MAC (obsolete) */ + for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10) + DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR); + + RET(0); +} + +/* bdx_reset - performs right type of reset depending on hw type */ +static int bdx_reset(struct bdx_priv *priv) +{ + ENTER; + RET((priv->pdev->device == 0x3009) + ? bdx_hw_reset(priv) + : bdx_sw_reset(priv)); +} + +/** + * bdx_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int bdx_close(struct net_device *ndev) +{ + struct bdx_priv *priv = NULL; + + ENTER; + priv = netdev_priv(ndev); + + napi_disable(&priv->napi); + + bdx_reset(priv); + bdx_hw_stop(priv); + bdx_rx_free(priv); + bdx_tx_free(priv); + RET(0); +} + +/** + * bdx_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int bdx_open(struct net_device *ndev) +{ + struct bdx_priv *priv; + int rc; + + ENTER; + priv = netdev_priv(ndev); + bdx_reset(priv); + if (netif_running(ndev)) + netif_stop_queue(priv->ndev); + + if ((rc = bdx_tx_init(priv)) || + (rc = bdx_rx_init(priv)) || + (rc = bdx_fw_load(priv))) + goto err; + + bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0); + + rc = bdx_hw_start(priv); + if (rc) + goto err; + + napi_enable(&priv->napi); + + print_fw_id(priv->nic); + + RET(0); + +err: + bdx_close(ndev); + RET(rc); +} + +static int bdx_range_check(struct bdx_priv *priv, u32 offset) +{ + return (offset > (u32) (BDX_REGS_SIZE / priv->nic->port_num)) ? + -EINVAL : 0; +} + +static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd) +{ + struct bdx_priv *priv = netdev_priv(ndev); + u32 data[3]; + int error; + + ENTER; + + DBG("jiffies=%ld cmd=%d\n", jiffies, cmd); + if (cmd != SIOCDEVPRIVATE) { + error = copy_from_user(data, ifr->ifr_data, sizeof(data)); + if (error) { + pr_err("can't copy from user\n"); + RET(-EFAULT); + } + DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]); + } + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + switch (data[0]) { + + case BDX_OP_READ: + error = bdx_range_check(priv, data[1]); + if (error < 0) + return error; + data[2] = READ_REG(priv, data[1]); + DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2], + data[2]); + error = copy_to_user(ifr->ifr_data, data, sizeof(data)); + if (error) + RET(-EFAULT); + break; + + case BDX_OP_WRITE: + error = bdx_range_check(priv, data[1]); + if (error < 0) + return error; + WRITE_REG(priv, data[1], data[2]); + DBG("write_reg(0x%x, 0x%x)\n", data[1], data[2]); + break; + + default: + RET(-EOPNOTSUPP); + } + return 0; +} + +static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) +{ + ENTER; + if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) + RET(bdx_ioctl_priv(ndev, ifr, cmd)); + else + RET(-EOPNOTSUPP); +} + +/* + * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid + * by passing VLAN filter table to hardware + * @ndev network device + * @vid VLAN vid + * @op add or kill operation + */ +static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable) +{ + struct bdx_priv *priv = netdev_priv(ndev); + u32 reg, bit, val; + + ENTER; + DBG2("vid=%d value=%d\n", (int)vid, enable); + if (unlikely(vid >= 4096)) { + pr_err("invalid VID: %u (> 4096)\n", vid); + RET(); + } + reg = regVLAN_0 + (vid / 32) * 4; + bit = 1 << vid % 32; + val = READ_REG(priv, reg); + DBG2("reg=%x, val=%x, bit=%d\n", reg, val, bit); + if (enable) + val |= bit; + else + val &= ~bit; + DBG2("new val %x\n", val); + WRITE_REG(priv, reg, val); + RET(); +} + +/* + * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table + * @ndev network device + * @vid VLAN vid to add + */ +static void bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid) +{ + __bdx_vlan_rx_vid(ndev, vid, 1); +} + +/* + * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table + * @ndev network device + * @vid VLAN vid to kill + */ +static void bdx_vlan_rx_kill_vid(struct net_device *ndev, unsigned short vid) +{ + __bdx_vlan_rx_vid(ndev, vid, 0); +} + +/** + * bdx_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int bdx_change_mtu(struct net_device *ndev, int new_mtu) +{ + ENTER; + + if (new_mtu == ndev->mtu) + RET(0); + + /* enforce minimum frame size */ + if (new_mtu < ETH_ZLEN) { + netdev_err(ndev, "mtu %d is less then minimal %d\n", + new_mtu, ETH_ZLEN); + RET(-EINVAL); + } + + ndev->mtu = new_mtu; + if (netif_running(ndev)) { + bdx_close(ndev); + bdx_open(ndev); + } + RET(0); +} + +static void bdx_setmulti(struct net_device *ndev) +{ + struct bdx_priv *priv = netdev_priv(ndev); + + u32 rxf_val = + GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB | GMAC_RX_FILTER_OSEN; + int i; + + ENTER; + /* IMF - imperfect (hash) rx multicat filter */ + /* PMF - perfect rx multicat filter */ + + /* FIXME: RXE(OFF) */ + if (ndev->flags & IFF_PROMISC) { + rxf_val |= GMAC_RX_FILTER_PRM; + } else if (ndev->flags & IFF_ALLMULTI) { + /* set IMF to accept all multicast frmaes */ + for (i = 0; i < MAC_MCST_HASH_NUM; i++) + WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, ~0); + } else if (!netdev_mc_empty(ndev)) { + u8 hash; + struct netdev_hw_addr *ha; + u32 reg, val; + + /* set IMF to deny all multicast frames */ + for (i = 0; i < MAC_MCST_HASH_NUM; i++) + WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, 0); + /* set PMF to deny all multicast frames */ + for (i = 0; i < MAC_MCST_NUM; i++) { + WRITE_REG(priv, regRX_MAC_MCST0 + i * 8, 0); + WRITE_REG(priv, regRX_MAC_MCST1 + i * 8, 0); + } + + /* use PMF to accept first MAC_MCST_NUM (15) addresses */ + /* TBD: sort addresses and write them in ascending order + * into RX_MAC_MCST regs. we skip this phase now and accept ALL + * multicast frames throu IMF */ + /* accept the rest of addresses throu IMF */ + netdev_for_each_mc_addr(ha, ndev) { + hash = 0; + for (i = 0; i < ETH_ALEN; i++) + hash ^= ha->addr[i]; + reg = regRX_MCST_HASH0 + ((hash >> 5) << 2); + val = READ_REG(priv, reg); + val |= (1 << (hash % 32)); + WRITE_REG(priv, reg, val); + } + + } else { + DBG("only own mac %d\n", netdev_mc_count(ndev)); + rxf_val |= GMAC_RX_FILTER_AB; + } + WRITE_REG(priv, regGMAC_RXF_A, rxf_val); + /* enable RX */ + /* FIXME: RXE(ON) */ + RET(); +} + +static int bdx_set_mac(struct net_device *ndev, void *p) +{ + struct bdx_priv *priv = netdev_priv(ndev); + struct sockaddr *addr = p; + + ENTER; + /* + if (netif_running(dev)) + return -EBUSY + */ + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + bdx_restore_mac(ndev, priv); + RET(0); +} + +static int bdx_read_mac(struct bdx_priv *priv) +{ + u16 macAddress[3], i; + ENTER; + + macAddress[2] = READ_REG(priv, regUNC_MAC0_A); + macAddress[2] = READ_REG(priv, regUNC_MAC0_A); + macAddress[1] = READ_REG(priv, regUNC_MAC1_A); + macAddress[1] = READ_REG(priv, regUNC_MAC1_A); + macAddress[0] = READ_REG(priv, regUNC_MAC2_A); + macAddress[0] = READ_REG(priv, regUNC_MAC2_A); + for (i = 0; i < 3; i++) { + priv->ndev->dev_addr[i * 2 + 1] = macAddress[i]; + priv->ndev->dev_addr[i * 2] = macAddress[i] >> 8; + } + RET(0); +} + +static u64 bdx_read_l2stat(struct bdx_priv *priv, int reg) +{ + u64 val; + + val = READ_REG(priv, reg); + val |= ((u64) READ_REG(priv, reg + 8)) << 32; + return val; +} + +/*Do the statistics-update work*/ +static void bdx_update_stats(struct bdx_priv *priv) +{ + struct bdx_stats *stats = &priv->hw_stats; + u64 *stats_vector = (u64 *) stats; + int i; + int addr; + + /*Fill HW structure */ + addr = 0x7200; + /*First 12 statistics - 0x7200 - 0x72B0 */ + for (i = 0; i < 12; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x72C0); + /* 0x72C0-0x72E0 RSRV */ + addr = 0x72F0; + for (; i < 16; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x7330); + /* 0x7330-0x7360 RSRV */ + addr = 0x7370; + for (; i < 19; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x73A0); + /* 0x73A0-0x73B0 RSRV */ + addr = 0x73C0; + for (; i < 23; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x7400); + BDX_ASSERT((sizeof(struct bdx_stats) / sizeof(u64)) != i); +} + +static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len, + u16 rxd_vlan); +static void print_rxfd(struct rxf_desc *rxfd); + +/************************************************************************* + * Rx DB * + *************************************************************************/ + +static void bdx_rxdb_destroy(struct rxdb *db) +{ + vfree(db); +} + +static struct rxdb *bdx_rxdb_create(int nelem) +{ + struct rxdb *db; + int i; + + db = vmalloc(sizeof(struct rxdb) + + (nelem * sizeof(int)) + + (nelem * sizeof(struct rx_map))); + if (likely(db != NULL)) { + db->stack = (int *)(db + 1); + db->elems = (void *)(db->stack + nelem); + db->nelem = nelem; + db->top = nelem; + for (i = 0; i < nelem; i++) + db->stack[i] = nelem - i - 1; /* to make first allocs + close to db struct*/ + } + + return db; +} + +static inline int bdx_rxdb_alloc_elem(struct rxdb *db) +{ + BDX_ASSERT(db->top <= 0); + return db->stack[--(db->top)]; +} + +static inline void *bdx_rxdb_addr_elem(struct rxdb *db, int n) +{ + BDX_ASSERT((n < 0) || (n >= db->nelem)); + return db->elems + n; +} + +static inline int bdx_rxdb_available(struct rxdb *db) +{ + return db->top; +} + +static inline void bdx_rxdb_free_elem(struct rxdb *db, int n) +{ + BDX_ASSERT((n >= db->nelem) || (n < 0)); + db->stack[(db->top)++] = n; +} + +/************************************************************************* + * Rx Init * + *************************************************************************/ + +/* bdx_rx_init - initialize RX all related HW and SW resources + * @priv - NIC private structure + * + * Returns 0 on success, negative value on failure + * + * It creates rxf and rxd fifos, update relevant HW registers, preallocate + * skb for rx. It assumes that Rx is desabled in HW + * funcs are grouped for better cache usage + * + * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be + * filled and packets will be dropped by nic without getting into host or + * cousing interrupt. Anyway, in that condition, host has no chance to process + * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles + */ + +/* TBD: ensure proper packet size */ + +static int bdx_rx_init(struct bdx_priv *priv) +{ + ENTER; + + if (bdx_fifo_init(priv, &priv->rxd_fifo0.m, priv->rxd_size, + regRXD_CFG0_0, regRXD_CFG1_0, + regRXD_RPTR_0, regRXD_WPTR_0)) + goto err_mem; + if (bdx_fifo_init(priv, &priv->rxf_fifo0.m, priv->rxf_size, + regRXF_CFG0_0, regRXF_CFG1_0, + regRXF_RPTR_0, regRXF_WPTR_0)) + goto err_mem; + priv->rxdb = bdx_rxdb_create(priv->rxf_fifo0.m.memsz / + sizeof(struct rxf_desc)); + if (!priv->rxdb) + goto err_mem; + + priv->rxf_fifo0.m.pktsz = priv->ndev->mtu + VLAN_ETH_HLEN; + return 0; + +err_mem: + netdev_err(priv->ndev, "Rx init failed\n"); + return -ENOMEM; +} + +/* bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo + * @priv - NIC private structure + * @f - RXF fifo + */ +static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f) +{ + struct rx_map *dm; + struct rxdb *db = priv->rxdb; + u16 i; + + ENTER; + DBG("total=%d free=%d busy=%d\n", db->nelem, bdx_rxdb_available(db), + db->nelem - bdx_rxdb_available(db)); + while (bdx_rxdb_available(db) > 0) { + i = bdx_rxdb_alloc_elem(db); + dm = bdx_rxdb_addr_elem(db, i); + dm->dma = 0; + } + for (i = 0; i < db->nelem; i++) { + dm = bdx_rxdb_addr_elem(db, i); + if (dm->dma) { + pci_unmap_single(priv->pdev, + dm->dma, f->m.pktsz, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(dm->skb); + } + } +} + +/* bdx_rx_free - release all Rx resources + * @priv - NIC private structure + * It assumes that Rx is desabled in HW + */ +static void bdx_rx_free(struct bdx_priv *priv) +{ + ENTER; + if (priv->rxdb) { + bdx_rx_free_skbs(priv, &priv->rxf_fifo0); + bdx_rxdb_destroy(priv->rxdb); + priv->rxdb = NULL; + } + bdx_fifo_free(priv, &priv->rxf_fifo0.m); + bdx_fifo_free(priv, &priv->rxd_fifo0.m); + + RET(); +} + +/************************************************************************* + * Rx Engine * + *************************************************************************/ + +/* bdx_rx_alloc_skbs - fill rxf fifo with new skbs + * @priv - nic's private structure + * @f - RXF fifo that needs skbs + * It allocates skbs, build rxf descs and push it (rxf descr) into rxf fifo. + * skb's virtual and physical addresses are stored in skb db. + * To calculate free space, func uses cached values of RPTR and WPTR + * When needed, it also updates RPTR and WPTR. + */ + +/* TBD: do not update WPTR if no desc were written */ + +static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f) +{ + struct sk_buff *skb; + struct rxf_desc *rxfd; + struct rx_map *dm; + int dno, delta, idx; + struct rxdb *db = priv->rxdb; + + ENTER; + dno = bdx_rxdb_available(db) - 1; + while (dno > 0) { + skb = dev_alloc_skb(f->m.pktsz + NET_IP_ALIGN); + if (!skb) { + pr_err("NO MEM: dev_alloc_skb failed\n"); + break; + } + skb->dev = priv->ndev; + skb_reserve(skb, NET_IP_ALIGN); + + idx = bdx_rxdb_alloc_elem(db); + dm = bdx_rxdb_addr_elem(db, idx); + dm->dma = pci_map_single(priv->pdev, + skb->data, f->m.pktsz, + PCI_DMA_FROMDEVICE); + dm->skb = skb; + rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr); + rxfd->info = CPU_CHIP_SWAP32(0x10003); /* INFO=1 BC=3 */ + rxfd->va_lo = idx; + rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma)); + rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma)); + rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz); + print_rxfd(rxfd); + + f->m.wptr += sizeof(struct rxf_desc); + delta = f->m.wptr - f->m.memsz; + if (unlikely(delta >= 0)) { + f->m.wptr = delta; + if (delta > 0) { + memcpy(f->m.va, f->m.va + f->m.memsz, delta); + DBG("wrapped descriptor\n"); + } + } + dno--; + } + /*TBD: to do - delayed rxf wptr like in txd */ + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); + RET(); +} + +static inline void +NETIF_RX_MUX(struct bdx_priv *priv, u32 rxd_val1, u16 rxd_vlan, + struct sk_buff *skb) +{ + ENTER; + DBG("rxdd->flags.bits.vtag=%d\n", GET_RXD_VTAG(rxd_val1)); + if (GET_RXD_VTAG(rxd_val1)) { + DBG("%s: vlan rcv vlan '%x' vtag '%x'\n", + priv->ndev->name, + GET_RXD_VLAN_ID(rxd_vlan), + GET_RXD_VTAG(rxd_val1)); + __vlan_hwaccel_put_tag(skb, GET_RXD_VLAN_TCI(rxd_vlan)); + } + netif_receive_skb(skb); +} + +static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd) +{ + struct rxf_desc *rxfd; + struct rx_map *dm; + struct rxf_fifo *f; + struct rxdb *db; + struct sk_buff *skb; + int delta; + + ENTER; + DBG("priv=%p rxdd=%p\n", priv, rxdd); + f = &priv->rxf_fifo0; + db = priv->rxdb; + DBG("db=%p f=%p\n", db, f); + dm = bdx_rxdb_addr_elem(db, rxdd->va_lo); + DBG("dm=%p\n", dm); + skb = dm->skb; + rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr); + rxfd->info = CPU_CHIP_SWAP32(0x10003); /* INFO=1 BC=3 */ + rxfd->va_lo = rxdd->va_lo; + rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma)); + rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma)); + rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz); + print_rxfd(rxfd); + + f->m.wptr += sizeof(struct rxf_desc); + delta = f->m.wptr - f->m.memsz; + if (unlikely(delta >= 0)) { + f->m.wptr = delta; + if (delta > 0) { + memcpy(f->m.va, f->m.va + f->m.memsz, delta); + DBG("wrapped descriptor\n"); + } + } + RET(); +} + +/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS + * NOTE: a special treatment is given to non-continuous descriptors + * that start near the end, wraps around and continue at the beginning. a second + * part is copied right after the first, and then descriptor is interpreted as + * normal. fifo has an extra space to allow such operations + * @priv - nic's private structure + * @f - RXF fifo that needs skbs + */ + +/* TBD: replace memcpy func call by explicite inline asm */ + +static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget) +{ + struct net_device *ndev = priv->ndev; + struct sk_buff *skb, *skb2; + struct rxd_desc *rxdd; + struct rx_map *dm; + struct rxf_fifo *rxf_fifo; + int tmp_len, size; + int done = 0; + int max_done = BDX_MAX_RX_DONE; + struct rxdb *db = NULL; + /* Unmarshalled descriptor - copy of descriptor in host order */ + u32 rxd_val1; + u16 len; + u16 rxd_vlan; + + ENTER; + max_done = budget; + + f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_WR_PTR; + + size = f->m.wptr - f->m.rptr; + if (size < 0) + size = f->m.memsz + size; /* size is negative :-) */ + + while (size > 0) { + + rxdd = (struct rxd_desc *)(f->m.va + f->m.rptr); + rxd_val1 = CPU_CHIP_SWAP32(rxdd->rxd_val1); + + len = CPU_CHIP_SWAP16(rxdd->len); + + rxd_vlan = CPU_CHIP_SWAP16(rxdd->rxd_vlan); + + print_rxdd(rxdd, rxd_val1, len, rxd_vlan); + + tmp_len = GET_RXD_BC(rxd_val1) << 3; + BDX_ASSERT(tmp_len <= 0); + size -= tmp_len; + if (size < 0) /* test for partially arrived descriptor */ + break; + + f->m.rptr += tmp_len; + + tmp_len = f->m.rptr - f->m.memsz; + if (unlikely(tmp_len >= 0)) { + f->m.rptr = tmp_len; + if (tmp_len > 0) { + DBG("wrapped desc rptr=%d tmp_len=%d\n", + f->m.rptr, tmp_len); + memcpy(f->m.va + f->m.memsz, f->m.va, tmp_len); + } + } + + if (unlikely(GET_RXD_ERR(rxd_val1))) { + DBG("rxd_err = 0x%x\n", GET_RXD_ERR(rxd_val1)); + ndev->stats.rx_errors++; + bdx_recycle_skb(priv, rxdd); + continue; + } + + rxf_fifo = &priv->rxf_fifo0; + db = priv->rxdb; + dm = bdx_rxdb_addr_elem(db, rxdd->va_lo); + skb = dm->skb; + + if (len < BDX_COPYBREAK && + (skb2 = dev_alloc_skb(len + NET_IP_ALIGN))) { + skb_reserve(skb2, NET_IP_ALIGN); + /*skb_put(skb2, len); */ + pci_dma_sync_single_for_cpu(priv->pdev, + dm->dma, rxf_fifo->m.pktsz, + PCI_DMA_FROMDEVICE); + memcpy(skb2->data, skb->data, len); + bdx_recycle_skb(priv, rxdd); + skb = skb2; + } else { + pci_unmap_single(priv->pdev, + dm->dma, rxf_fifo->m.pktsz, + PCI_DMA_FROMDEVICE); + bdx_rxdb_free_elem(db, rxdd->va_lo); + } + + ndev->stats.rx_bytes += len; + + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, ndev); + + /* Non-IP packets aren't checksum-offloaded */ + if (GET_RXD_PKT_ID(rxd_val1) == 0) + skb_checksum_none_assert(skb); + else + skb->ip_summed = CHECKSUM_UNNECESSARY; + + NETIF_RX_MUX(priv, rxd_val1, rxd_vlan, skb); + + if (++done >= max_done) + break; + } + + ndev->stats.rx_packets += done; + + /* FIXME: do smth to minimize pci accesses */ + WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR); + + bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0); + + RET(done); +} + +/************************************************************************* + * Debug / Temprorary Code * + *************************************************************************/ +static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len, + u16 rxd_vlan) +{ + DBG("ERROR: rxdd bc %d rxfq %d to %d type %d err %d rxp %d pkt_id %d vtag %d len %d vlan_id %d cfi %d prio %d va_lo %d va_hi %d\n", + GET_RXD_BC(rxd_val1), GET_RXD_RXFQ(rxd_val1), GET_RXD_TO(rxd_val1), + GET_RXD_TYPE(rxd_val1), GET_RXD_ERR(rxd_val1), + GET_RXD_RXP(rxd_val1), GET_RXD_PKT_ID(rxd_val1), + GET_RXD_VTAG(rxd_val1), len, GET_RXD_VLAN_ID(rxd_vlan), + GET_RXD_CFI(rxd_vlan), GET_RXD_PRIO(rxd_vlan), rxdd->va_lo, + rxdd->va_hi); +} + +static void print_rxfd(struct rxf_desc *rxfd) +{ + DBG("=== RxF desc CHIP ORDER/ENDIANESS =============\n" + "info 0x%x va_lo %u pa_lo 0x%x pa_hi 0x%x len 0x%x\n", + rxfd->info, rxfd->va_lo, rxfd->pa_lo, rxfd->pa_hi, rxfd->len); +} + +/* + * TX HW/SW interaction overview + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * There are 2 types of TX communication channels between driver and NIC. + * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets + * 2) TX Data Fifo - TXD - holds descriptors of full buffers. + * + * Currently NIC supports TSO, checksuming and gather DMA + * UFO and IP fragmentation is on the way + * + * RX SW Data Structures + * ~~~~~~~~~~~~~~~~~~~~~ + * txdb - used to keep track of all skbs owned by SW and their dma addresses. + * For TX case, ownership lasts from geting packet via hard_xmit and until HW + * acknowledges sent by TXF descriptors. + * Implemented as cyclic buffer. + * fifo - keeps info about fifo's size and location, relevant HW registers, + * usage and skb db. Each RXD and RXF Fifo has its own fifo structure. + * Implemented as simple struct. + * + * TX SW Execution Flow + * ~~~~~~~~~~~~~~~~~~~~ + * OS calls driver's hard_xmit method with packet to sent. + * Driver creates DMA mappings, builds TXD descriptors and kicks HW + * by updating TXD WPTR. + * When packet is sent, HW write us TXF descriptor and SW frees original skb. + * To prevent TXD fifo overflow without reading HW registers every time, + * SW deploys "tx level" technique. + * Upon strart up, tx level is initialized to TXD fifo length. + * For every sent packet, SW gets its TXD descriptor sizei + * (from precalculated array) and substructs it from tx level. + * The size is also stored in txdb. When TXF ack arrives, SW fetch size of + * original TXD descriptor from txdb and adds it to tx level. + * When Tx level drops under some predefined treshhold, the driver + * stops the TX queue. When TX level rises above that level, + * the tx queue is enabled again. + * + * This technique avoids eccessive reading of RPTR and WPTR registers. + * As our benchmarks shows, it adds 1.5 Gbit/sec to NIS's throuput. + */ + +/************************************************************************* + * Tx DB * + *************************************************************************/ +static inline int bdx_tx_db_size(struct txdb *db) +{ + int taken = db->wptr - db->rptr; + if (taken < 0) + taken = db->size + 1 + taken; /* (size + 1) equals memsz */ + + return db->size - taken; +} + +/* __bdx_tx_ptr_next - helper function, increment read/write pointer + wrap + * @d - tx data base + * @ptr - read or write pointer + */ +static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr) +{ + BDX_ASSERT(db == NULL || pptr == NULL); /* sanity */ + + BDX_ASSERT(*pptr != db->rptr && /* expect either read */ + *pptr != db->wptr); /* or write pointer */ + + BDX_ASSERT(*pptr < db->start || /* pointer has to be */ + *pptr >= db->end); /* in range */ + + ++*pptr; + if (unlikely(*pptr == db->end)) + *pptr = db->start; +} + +/* bdx_tx_db_inc_rptr - increment read pointer + * @d - tx data base + */ +static inline void bdx_tx_db_inc_rptr(struct txdb *db) +{ + BDX_ASSERT(db->rptr == db->wptr); /* can't read from empty db */ + __bdx_tx_db_ptr_next(db, &db->rptr); +} + +/* bdx_tx_db_inc_rptr - increment write pointer + * @d - tx data base + */ +static inline void bdx_tx_db_inc_wptr(struct txdb *db) +{ + __bdx_tx_db_ptr_next(db, &db->wptr); + BDX_ASSERT(db->rptr == db->wptr); /* we can not get empty db as + a result of write */ +} + +/* bdx_tx_db_init - creates and initializes tx db + * @d - tx data base + * @sz_type - size of tx fifo + * Returns 0 on success, error code otherwise + */ +static int bdx_tx_db_init(struct txdb *d, int sz_type) +{ + int memsz = FIFO_SIZE * (1 << (sz_type + 1)); + + d->start = vmalloc(memsz); + if (!d->start) + return -ENOMEM; + + /* + * In order to differentiate between db is empty and db is full + * states at least one element should always be empty in order to + * avoid rptr == wptr which means db is empty + */ + d->size = memsz / sizeof(struct tx_map) - 1; + d->end = d->start + d->size + 1; /* just after last element */ + + /* all dbs are created equally empty */ + d->rptr = d->start; + d->wptr = d->start; + + return 0; +} + +/* bdx_tx_db_close - closes tx db and frees all memory + * @d - tx data base + */ +static void bdx_tx_db_close(struct txdb *d) +{ + BDX_ASSERT(d == NULL); + + vfree(d->start); + d->start = NULL; +} + +/************************************************************************* + * Tx Engine * + *************************************************************************/ + +/* sizes of tx desc (including padding if needed) as function + * of skb's frag number */ +static struct { + u16 bytes; + u16 qwords; /* qword = 64 bit */ +} txd_sizes[MAX_SKB_FRAGS + 1]; + +/* txdb_map_skb - creates and stores dma mappings for skb's data blocks + * @priv - NIC private structure + * @skb - socket buffer to map + * + * It makes dma mappings for skb's data blocks and writes them to PBL of + * new tx descriptor. It also stores them in the tx db, so they could be + * unmaped after data was sent. It is reponsibility of a caller to make + * sure that there is enough space in the tx db. Last element holds pointer + * to skb itself and marked with zero length + */ +static inline void +bdx_tx_map_skb(struct bdx_priv *priv, struct sk_buff *skb, + struct txd_desc *txdd) +{ + struct txdb *db = &priv->txdb; + struct pbl *pbl = &txdd->pbl[0]; + int nr_frags = skb_shinfo(skb)->nr_frags; + int i; + + db->wptr->len = skb_headlen(skb); + db->wptr->addr.dma = pci_map_single(priv->pdev, skb->data, + db->wptr->len, PCI_DMA_TODEVICE); + pbl->len = CPU_CHIP_SWAP32(db->wptr->len); + pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma)); + pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma)); + DBG("=== pbl len: 0x%x ================\n", pbl->len); + DBG("=== pbl pa_lo: 0x%x ================\n", pbl->pa_lo); + DBG("=== pbl pa_hi: 0x%x ================\n", pbl->pa_hi); + bdx_tx_db_inc_wptr(db); + + for (i = 0; i < nr_frags; i++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[i]; + db->wptr->len = frag->size; + db->wptr->addr.dma = + pci_map_page(priv->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + + pbl++; + pbl->len = CPU_CHIP_SWAP32(db->wptr->len); + pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma)); + pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma)); + bdx_tx_db_inc_wptr(db); + } + + /* add skb clean up info. */ + db->wptr->len = -txd_sizes[nr_frags].bytes; + db->wptr->addr.skb = skb; + bdx_tx_db_inc_wptr(db); +} + +/* init_txd_sizes - precalculate sizes of descriptors for skbs up to 16 frags + * number of frags is used as index to fetch correct descriptors size, + * instead of calculating it each time */ +static void __init init_txd_sizes(void) +{ + int i, lwords; + + /* 7 - is number of lwords in txd with one phys buffer + * 3 - is number of lwords used for every additional phys buffer */ + for (i = 0; i < MAX_SKB_FRAGS + 1; i++) { + lwords = 7 + (i * 3); + if (lwords & 1) + lwords++; /* pad it with 1 lword */ + txd_sizes[i].qwords = lwords >> 1; + txd_sizes[i].bytes = lwords << 2; + } +} + +/* bdx_tx_init - initialize all Tx related stuff. + * Namely, TXD and TXF fifos, database etc */ +static int bdx_tx_init(struct bdx_priv *priv) +{ + if (bdx_fifo_init(priv, &priv->txd_fifo0.m, priv->txd_size, + regTXD_CFG0_0, + regTXD_CFG1_0, regTXD_RPTR_0, regTXD_WPTR_0)) + goto err_mem; + if (bdx_fifo_init(priv, &priv->txf_fifo0.m, priv->txf_size, + regTXF_CFG0_0, + regTXF_CFG1_0, regTXF_RPTR_0, regTXF_WPTR_0)) + goto err_mem; + + /* The TX db has to keep mappings for all packets sent (on TxD) + * and not yet reclaimed (on TxF) */ + if (bdx_tx_db_init(&priv->txdb, max(priv->txd_size, priv->txf_size))) + goto err_mem; + + priv->tx_level = BDX_MAX_TX_LEVEL; +#ifdef BDX_DELAY_WPTR + priv->tx_update_mark = priv->tx_level - 1024; +#endif + return 0; + +err_mem: + netdev_err(priv->ndev, "Tx init failed\n"); + return -ENOMEM; +} + +/* + * bdx_tx_space - calculates available space in TX fifo + * @priv - NIC private structure + * Returns available space in TX fifo in bytes + */ +static inline int bdx_tx_space(struct bdx_priv *priv) +{ + struct txd_fifo *f = &priv->txd_fifo0; + int fsize; + + f->m.rptr = READ_REG(priv, f->m.reg_RPTR) & TXF_WPTR_WR_PTR; + fsize = f->m.rptr - f->m.wptr; + if (fsize <= 0) + fsize = f->m.memsz + fsize; + return fsize; +} + +/* bdx_tx_transmit - send packet to NIC + * @skb - packet to send + * ndev - network device assigned to NIC + * Return codes: + * o NETDEV_TX_OK everything ok. + * o NETDEV_TX_BUSY Cannot transmit packet, try later + * Usually a bug, means queue start/stop flow control is broken in + * the driver. Note: the driver must NOT put the skb in its DMA ring. + * o NETDEV_TX_LOCKED Locking failed, please retry quickly. + */ +static netdev_tx_t bdx_tx_transmit(struct sk_buff *skb, + struct net_device *ndev) +{ + struct bdx_priv *priv = netdev_priv(ndev); + struct txd_fifo *f = &priv->txd_fifo0; + int txd_checksum = 7; /* full checksum */ + int txd_lgsnd = 0; + int txd_vlan_id = 0; + int txd_vtag = 0; + int txd_mss = 0; + + int nr_frags = skb_shinfo(skb)->nr_frags; + struct txd_desc *txdd; + int len; + unsigned long flags; + + ENTER; + local_irq_save(flags); + if (!spin_trylock(&priv->tx_lock)) { + local_irq_restore(flags); + DBG("%s[%s]: TX locked, returning NETDEV_TX_LOCKED\n", + BDX_DRV_NAME, ndev->name); + return NETDEV_TX_LOCKED; + } + + /* build tx descriptor */ + BDX_ASSERT(f->m.wptr >= f->m.memsz); /* started with valid wptr */ + txdd = (struct txd_desc *)(f->m.va + f->m.wptr); + if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) + txd_checksum = 0; + + if (skb_shinfo(skb)->gso_size) { + txd_mss = skb_shinfo(skb)->gso_size; + txd_lgsnd = 1; + DBG("skb %p skb len %d gso size = %d\n", skb, skb->len, + txd_mss); + } + + if (vlan_tx_tag_present(skb)) { + /*Cut VLAN ID to 12 bits */ + txd_vlan_id = vlan_tx_tag_get(skb) & BITS_MASK(12); + txd_vtag = 1; + } + + txdd->length = CPU_CHIP_SWAP16(skb->len); + txdd->mss = CPU_CHIP_SWAP16(txd_mss); + txdd->txd_val1 = + CPU_CHIP_SWAP32(TXD_W1_VAL + (txd_sizes[nr_frags].qwords, txd_checksum, txd_vtag, + txd_lgsnd, txd_vlan_id)); + DBG("=== TxD desc =====================\n"); + DBG("=== w1: 0x%x ================\n", txdd->txd_val1); + DBG("=== w2: mss 0x%x len 0x%x\n", txdd->mss, txdd->length); + + bdx_tx_map_skb(priv, skb, txdd); + + /* increment TXD write pointer. In case of + fifo wrapping copy reminder of the descriptor + to the beginning */ + f->m.wptr += txd_sizes[nr_frags].bytes; + len = f->m.wptr - f->m.memsz; + if (unlikely(len >= 0)) { + f->m.wptr = len; + if (len > 0) { + BDX_ASSERT(len > f->m.memsz); + memcpy(f->m.va, f->m.va + f->m.memsz, len); + } + } + BDX_ASSERT(f->m.wptr >= f->m.memsz); /* finished with valid wptr */ + + priv->tx_level -= txd_sizes[nr_frags].bytes; + BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL); +#ifdef BDX_DELAY_WPTR + if (priv->tx_level > priv->tx_update_mark) { + /* Force memory writes to complete before letting h/w + know there are new descriptors to fetch. + (might be needed on platforms like IA64) + wmb(); */ + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); + } else { + if (priv->tx_noupd++ > BDX_NO_UPD_PACKETS) { + priv->tx_noupd = 0; + WRITE_REG(priv, f->m.reg_WPTR, + f->m.wptr & TXF_WPTR_WR_PTR); + } + } +#else + /* Force memory writes to complete before letting h/w + know there are new descriptors to fetch. + (might be needed on platforms like IA64) + wmb(); */ + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); + +#endif +#ifdef BDX_LLTX + ndev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */ +#endif + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += skb->len; + + if (priv->tx_level < BDX_MIN_TX_LEVEL) { + DBG("%s: %s: TX Q STOP level %d\n", + BDX_DRV_NAME, ndev->name, priv->tx_level); + netif_stop_queue(ndev); + } + + spin_unlock_irqrestore(&priv->tx_lock, flags); + return NETDEV_TX_OK; +} + +/* bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ. + * @priv - bdx adapter + * It scans TXF fifo for descriptors, frees DMA mappings and reports to OS + * that those packets were sent + */ +static void bdx_tx_cleanup(struct bdx_priv *priv) +{ + struct txf_fifo *f = &priv->txf_fifo0; + struct txdb *db = &priv->txdb; + int tx_level = 0; + + ENTER; + f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_MASK; + BDX_ASSERT(f->m.rptr >= f->m.memsz); /* started with valid rptr */ + + while (f->m.wptr != f->m.rptr) { + f->m.rptr += BDX_TXF_DESC_SZ; + f->m.rptr &= f->m.size_mask; + + /* unmap all the fragments */ + /* first has to come tx_maps containing dma */ + BDX_ASSERT(db->rptr->len == 0); + do { + BDX_ASSERT(db->rptr->addr.dma == 0); + pci_unmap_page(priv->pdev, db->rptr->addr.dma, + db->rptr->len, PCI_DMA_TODEVICE); + bdx_tx_db_inc_rptr(db); + } while (db->rptr->len > 0); + tx_level -= db->rptr->len; /* '-' koz len is negative */ + + /* now should come skb pointer - free it */ + dev_kfree_skb_irq(db->rptr->addr.skb); + bdx_tx_db_inc_rptr(db); + } + + /* let h/w know which TXF descriptors were cleaned */ + BDX_ASSERT((f->m.wptr & TXF_WPTR_WR_PTR) >= f->m.memsz); + WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR); + + /* We reclaimed resources, so in case the Q is stopped by xmit callback, + * we resume the transmition and use tx_lock to synchronize with xmit.*/ + spin_lock(&priv->tx_lock); + priv->tx_level += tx_level; + BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL); +#ifdef BDX_DELAY_WPTR + if (priv->tx_noupd) { + priv->tx_noupd = 0; + WRITE_REG(priv, priv->txd_fifo0.m.reg_WPTR, + priv->txd_fifo0.m.wptr & TXF_WPTR_WR_PTR); + } +#endif + + if (unlikely(netif_queue_stopped(priv->ndev) && + netif_carrier_ok(priv->ndev) && + (priv->tx_level >= BDX_MIN_TX_LEVEL))) { + DBG("%s: %s: TX Q WAKE level %d\n", + BDX_DRV_NAME, priv->ndev->name, priv->tx_level); + netif_wake_queue(priv->ndev); + } + spin_unlock(&priv->tx_lock); +} + +/* bdx_tx_free_skbs - frees all skbs from TXD fifo. + * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod + */ +static void bdx_tx_free_skbs(struct bdx_priv *priv) +{ + struct txdb *db = &priv->txdb; + + ENTER; + while (db->rptr != db->wptr) { + if (likely(db->rptr->len)) + pci_unmap_page(priv->pdev, db->rptr->addr.dma, + db->rptr->len, PCI_DMA_TODEVICE); + else + dev_kfree_skb(db->rptr->addr.skb); + bdx_tx_db_inc_rptr(db); + } + RET(); +} + +/* bdx_tx_free - frees all Tx resources */ +static void bdx_tx_free(struct bdx_priv *priv) +{ + ENTER; + bdx_tx_free_skbs(priv); + bdx_fifo_free(priv, &priv->txd_fifo0.m); + bdx_fifo_free(priv, &priv->txf_fifo0.m); + bdx_tx_db_close(&priv->txdb); +} + +/* bdx_tx_push_desc - push descriptor to TxD fifo + * @priv - NIC private structure + * @data - desc's data + * @size - desc's size + * + * Pushes desc to TxD fifo and overlaps it if needed. + * NOTE: this func does not check for available space. this is responsibility + * of the caller. Neither does it check that data size is smaller than + * fifo size. + */ +static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) +{ + struct txd_fifo *f = &priv->txd_fifo0; + int i = f->m.memsz - f->m.wptr; + + if (size == 0) + return; + + if (i > size) { + memcpy(f->m.va + f->m.wptr, data, size); + f->m.wptr += size; + } else { + memcpy(f->m.va + f->m.wptr, data, i); + f->m.wptr = size - i; + memcpy(f->m.va, data + i, f->m.wptr); + } + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); +} + +/* bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way + * @priv - NIC private structure + * @data - desc's data + * @size - desc's size + * + * NOTE: this func does check for available space and, if necessary, waits for + * NIC to read existing data before writing new one. + */ +static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size) +{ + int timer = 0; + ENTER; + + while (size > 0) { + /* we substruct 8 because when fifo is full rptr == wptr + which also means that fifo is empty, we can understand + the difference, but could hw do the same ??? :) */ + int avail = bdx_tx_space(priv) - 8; + if (avail <= 0) { + if (timer++ > 300) { /* prevent endless loop */ + DBG("timeout while writing desc to TxD fifo\n"); + break; + } + udelay(50); /* give hw a chance to clean fifo */ + continue; + } + avail = min(avail, size); + DBG("about to push %d bytes starting %p size %d\n", avail, + data, size); + bdx_tx_push_desc(priv, data, avail); + size -= avail; + data += avail; + } + RET(); +} + +static const struct net_device_ops bdx_netdev_ops = { + .ndo_open = bdx_open, + .ndo_stop = bdx_close, + .ndo_start_xmit = bdx_tx_transmit, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = bdx_ioctl, + .ndo_set_multicast_list = bdx_setmulti, + .ndo_change_mtu = bdx_change_mtu, + .ndo_set_mac_address = bdx_set_mac, + .ndo_vlan_rx_add_vid = bdx_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = bdx_vlan_rx_kill_vid, +}; + +/** + * bdx_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in bdx_pci_tbl + * + * Returns 0 on success, negative on failure + * + * bdx_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + * + * functions and their order used as explained in + * /usr/src/linux/Documentation/DMA-{API,mapping}.txt + * + */ + +/* TBD: netif_msg should be checked and implemented. I disable it for now */ +static int __devinit +bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *ndev; + struct bdx_priv *priv; + int err, pci_using_dac, port; + unsigned long pciaddr; + u32 regionSize; + struct pci_nic *nic; + + ENTER; + + nic = vmalloc(sizeof(*nic)); + if (!nic) + RET(-ENOMEM); + + /************** pci *****************/ + err = pci_enable_device(pdev); + if (err) /* it triggers interrupt, dunno why. */ + goto err_pci; /* it's not a problem though */ + + if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) && + !(err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))) { + pci_using_dac = 1; + } else { + if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) || + (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) { + pr_err("No usable DMA configuration, aborting\n"); + goto err_dma; + } + pci_using_dac = 0; + } + + err = pci_request_regions(pdev, BDX_DRV_NAME); + if (err) + goto err_dma; + + pci_set_master(pdev); + + pciaddr = pci_resource_start(pdev, 0); + if (!pciaddr) { + err = -EIO; + pr_err("no MMIO resource\n"); + goto err_out_res; + } + regionSize = pci_resource_len(pdev, 0); + if (regionSize < BDX_REGS_SIZE) { + err = -EIO; + pr_err("MMIO resource (%x) too small\n", regionSize); + goto err_out_res; + } + + nic->regs = ioremap(pciaddr, regionSize); + if (!nic->regs) { + err = -EIO; + pr_err("ioremap failed\n"); + goto err_out_res; + } + + if (pdev->irq < 2) { + err = -EIO; + pr_err("invalid irq (%d)\n", pdev->irq); + goto err_out_iomap; + } + pci_set_drvdata(pdev, nic); + + if (pdev->device == 0x3014) + nic->port_num = 2; + else + nic->port_num = 1; + + print_hw_id(pdev); + + bdx_hw_reset_direct(nic->regs); + + nic->irq_type = IRQ_INTX; +#ifdef BDX_MSI + if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) { + err = pci_enable_msi(pdev); + if (err) + pr_err("Can't eneble msi. error is %d\n", err); + else + nic->irq_type = IRQ_MSI; + } else + DBG("HW does not support MSI\n"); +#endif + + /************** netdev **************/ + for (port = 0; port < nic->port_num; port++) { + ndev = alloc_etherdev(sizeof(struct bdx_priv)); + if (!ndev) { + err = -ENOMEM; + pr_err("alloc_etherdev failed\n"); + goto err_out_iomap; + } + + ndev->netdev_ops = &bdx_netdev_ops; + ndev->tx_queue_len = BDX_NDEV_TXQ_LEN; + + bdx_set_ethtool_ops(ndev); /* ethtool interface */ + + /* these fields are used for info purposes only + * so we can have them same for all ports of the board */ + ndev->if_port = port; + ndev->base_addr = pciaddr; + ndev->mem_start = pciaddr; + ndev->mem_end = pciaddr + regionSize; + ndev->irq = pdev->irq; + ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO + | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER | NETIF_F_RXCSUM + /*| NETIF_F_FRAGLIST */ + ; + ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | + NETIF_F_TSO | NETIF_F_HW_VLAN_TX; + + if (pci_using_dac) + ndev->features |= NETIF_F_HIGHDMA; + + /************** priv ****************/ + priv = nic->priv[port] = netdev_priv(ndev); + + priv->pBdxRegs = nic->regs + port * 0x8000; + priv->port = port; + priv->pdev = pdev; + priv->ndev = ndev; + priv->nic = nic; + priv->msg_enable = BDX_DEF_MSG_ENABLE; + + netif_napi_add(ndev, &priv->napi, bdx_poll, 64); + + if ((readl(nic->regs + FPGA_VER) & 0xFFF) == 308) { + DBG("HW statistics not supported\n"); + priv->stats_flag = 0; + } else { + priv->stats_flag = 1; + } + + /* Initialize fifo sizes. */ + priv->txd_size = 2; + priv->txf_size = 2; + priv->rxd_size = 2; + priv->rxf_size = 3; + + /* Initialize the initial coalescing registers. */ + priv->rdintcm = INT_REG_VAL(0x20, 1, 4, 12); + priv->tdintcm = INT_REG_VAL(0x20, 1, 0, 12); + + /* ndev->xmit_lock spinlock is not used. + * Private priv->tx_lock is used for synchronization + * between transmit and TX irq cleanup. In addition + * set multicast list callback has to use priv->tx_lock. + */ +#ifdef BDX_LLTX + ndev->features |= NETIF_F_LLTX; +#endif + spin_lock_init(&priv->tx_lock); + + /*bdx_hw_reset(priv); */ + if (bdx_read_mac(priv)) { + pr_err("load MAC address failed\n"); + goto err_out_iomap; + } + SET_NETDEV_DEV(ndev, &pdev->dev); + err = register_netdev(ndev); + if (err) { + pr_err("register_netdev failed\n"); + goto err_out_free; + } + netif_carrier_off(ndev); + netif_stop_queue(ndev); + + print_eth_id(ndev); + } + RET(0); + +err_out_free: + free_netdev(ndev); +err_out_iomap: + iounmap(nic->regs); +err_out_res: + pci_release_regions(pdev); +err_dma: + pci_disable_device(pdev); +err_pci: + vfree(nic); + + RET(err); +} + +/****************** Ethtool interface *********************/ +/* get strings for statistics counters */ +static const char + bdx_stat_names[][ETH_GSTRING_LEN] = { + "InUCast", /* 0x7200 */ + "InMCast", /* 0x7210 */ + "InBCast", /* 0x7220 */ + "InPkts", /* 0x7230 */ + "InErrors", /* 0x7240 */ + "InDropped", /* 0x7250 */ + "FrameTooLong", /* 0x7260 */ + "FrameSequenceErrors", /* 0x7270 */ + "InVLAN", /* 0x7280 */ + "InDroppedDFE", /* 0x7290 */ + "InDroppedIntFull", /* 0x72A0 */ + "InFrameAlignErrors", /* 0x72B0 */ + + /* 0x72C0-0x72E0 RSRV */ + + "OutUCast", /* 0x72F0 */ + "OutMCast", /* 0x7300 */ + "OutBCast", /* 0x7310 */ + "OutPkts", /* 0x7320 */ + + /* 0x7330-0x7360 RSRV */ + + "OutVLAN", /* 0x7370 */ + "InUCastOctects", /* 0x7380 */ + "OutUCastOctects", /* 0x7390 */ + + /* 0x73A0-0x73B0 RSRV */ + + "InBCastOctects", /* 0x73C0 */ + "OutBCastOctects", /* 0x73D0 */ + "InOctects", /* 0x73E0 */ + "OutOctects", /* 0x73F0 */ +}; + +/* + * bdx_get_settings - get device-specific settings + * @netdev + * @ecmd + */ +static int bdx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + u32 rdintcm; + u32 tdintcm; + struct bdx_priv *priv = netdev_priv(netdev); + + rdintcm = priv->rdintcm; + tdintcm = priv->tdintcm; + + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); + ethtool_cmd_speed_set(ecmd, SPEED_10000); + ecmd->duplex = DUPLEX_FULL; + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; /* what does it mean? */ + ecmd->autoneg = AUTONEG_DISABLE; + + /* PCK_TH measures in multiples of FIFO bytes + We translate to packets */ + ecmd->maxtxpkt = + ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ); + ecmd->maxrxpkt = + ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc)); + + return 0; +} + +/* + * bdx_get_drvinfo - report driver information + * @netdev + * @drvinfo + */ +static void +bdx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) +{ + struct bdx_priv *priv = netdev_priv(netdev); + + strlcat(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver)); + strlcat(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version)); + strlcat(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcat(drvinfo->bus_info, pci_name(priv->pdev), + sizeof(drvinfo->bus_info)); + + drvinfo->n_stats = ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names) : 0); + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = 0; + drvinfo->eedump_len = 0; +} + +/* + * bdx_get_coalesce - get interrupt coalescing parameters + * @netdev + * @ecoal + */ +static int +bdx_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal) +{ + u32 rdintcm; + u32 tdintcm; + struct bdx_priv *priv = netdev_priv(netdev); + + rdintcm = priv->rdintcm; + tdintcm = priv->tdintcm; + + /* PCK_TH measures in multiples of FIFO bytes + We translate to packets */ + ecoal->rx_coalesce_usecs = GET_INT_COAL(rdintcm) * INT_COAL_MULT; + ecoal->rx_max_coalesced_frames = + ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc)); + + ecoal->tx_coalesce_usecs = GET_INT_COAL(tdintcm) * INT_COAL_MULT; + ecoal->tx_max_coalesced_frames = + ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ); + + /* adaptive parameters ignored */ + return 0; +} + +/* + * bdx_set_coalesce - set interrupt coalescing parameters + * @netdev + * @ecoal + */ +static int +bdx_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal) +{ + u32 rdintcm; + u32 tdintcm; + struct bdx_priv *priv = netdev_priv(netdev); + int rx_coal; + int tx_coal; + int rx_max_coal; + int tx_max_coal; + + /* Check for valid input */ + rx_coal = ecoal->rx_coalesce_usecs / INT_COAL_MULT; + tx_coal = ecoal->tx_coalesce_usecs / INT_COAL_MULT; + rx_max_coal = ecoal->rx_max_coalesced_frames; + tx_max_coal = ecoal->tx_max_coalesced_frames; + + /* Translate from packets to multiples of FIFO bytes */ + rx_max_coal = + (((rx_max_coal * sizeof(struct rxf_desc)) + PCK_TH_MULT - 1) + / PCK_TH_MULT); + tx_max_coal = + (((tx_max_coal * BDX_TXF_DESC_SZ) + PCK_TH_MULT - 1) + / PCK_TH_MULT); + + if ((rx_coal > 0x7FFF) || (tx_coal > 0x7FFF) || + (rx_max_coal > 0xF) || (tx_max_coal > 0xF)) + return -EINVAL; + + rdintcm = INT_REG_VAL(rx_coal, GET_INT_COAL_RC(priv->rdintcm), + GET_RXF_TH(priv->rdintcm), rx_max_coal); + tdintcm = INT_REG_VAL(tx_coal, GET_INT_COAL_RC(priv->tdintcm), 0, + tx_max_coal); + + priv->rdintcm = rdintcm; + priv->tdintcm = tdintcm; + + WRITE_REG(priv, regRDINTCM0, rdintcm); + WRITE_REG(priv, regTDINTCM0, tdintcm); + + return 0; +} + +/* Convert RX fifo size to number of pending packets */ +static inline int bdx_rx_fifo_size_to_packets(int rx_size) +{ + return (FIFO_SIZE * (1 << rx_size)) / sizeof(struct rxf_desc); +} + +/* Convert TX fifo size to number of pending packets */ +static inline int bdx_tx_fifo_size_to_packets(int tx_size) +{ + return (FIFO_SIZE * (1 << tx_size)) / BDX_TXF_DESC_SZ; +} + +/* + * bdx_get_ringparam - report ring sizes + * @netdev + * @ring + */ +static void +bdx_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) +{ + struct bdx_priv *priv = netdev_priv(netdev); + + /*max_pending - the maximum-sized FIFO we allow */ + ring->rx_max_pending = bdx_rx_fifo_size_to_packets(3); + ring->tx_max_pending = bdx_tx_fifo_size_to_packets(3); + ring->rx_pending = bdx_rx_fifo_size_to_packets(priv->rxf_size); + ring->tx_pending = bdx_tx_fifo_size_to_packets(priv->txd_size); +} + +/* + * bdx_set_ringparam - set ring sizes + * @netdev + * @ring + */ +static int +bdx_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) +{ + struct bdx_priv *priv = netdev_priv(netdev); + int rx_size = 0; + int tx_size = 0; + + for (; rx_size < 4; rx_size++) { + if (bdx_rx_fifo_size_to_packets(rx_size) >= ring->rx_pending) + break; + } + if (rx_size == 4) + rx_size = 3; + + for (; tx_size < 4; tx_size++) { + if (bdx_tx_fifo_size_to_packets(tx_size) >= ring->tx_pending) + break; + } + if (tx_size == 4) + tx_size = 3; + + /*Is there anything to do? */ + if ((rx_size == priv->rxf_size) && + (tx_size == priv->txd_size)) + return 0; + + priv->rxf_size = rx_size; + if (rx_size > 1) + priv->rxd_size = rx_size - 1; + else + priv->rxd_size = rx_size; + + priv->txf_size = priv->txd_size = tx_size; + + if (netif_running(netdev)) { + bdx_close(netdev); + bdx_open(netdev); + } + return 0; +} + +/* + * bdx_get_strings - return a set of strings that describe the requested objects + * @netdev + * @data + */ +static void bdx_get_strings(struct net_device *netdev, u32 stringset, u8 *data) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(data, *bdx_stat_names, sizeof(bdx_stat_names)); + break; + } +} + +/* + * bdx_get_sset_count - return number of statistics or tests + * @netdev + */ +static int bdx_get_sset_count(struct net_device *netdev, int stringset) +{ + struct bdx_priv *priv = netdev_priv(netdev); + + switch (stringset) { + case ETH_SS_STATS: + BDX_ASSERT(ARRAY_SIZE(bdx_stat_names) + != sizeof(struct bdx_stats) / sizeof(u64)); + return (priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names) : 0; + } + + return -EINVAL; +} + +/* + * bdx_get_ethtool_stats - return device's hardware L2 statistics + * @netdev + * @stats + * @data + */ +static void bdx_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct bdx_priv *priv = netdev_priv(netdev); + + if (priv->stats_flag) { + + /* Update stats from HW */ + bdx_update_stats(priv); + + /* Copy data to user buffer */ + memcpy(data, &priv->hw_stats, sizeof(priv->hw_stats)); + } +} + +/* + * bdx_set_ethtool_ops - ethtool interface implementation + * @netdev + */ +static void bdx_set_ethtool_ops(struct net_device *netdev) +{ + static const struct ethtool_ops bdx_ethtool_ops = { + .get_settings = bdx_get_settings, + .get_drvinfo = bdx_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_coalesce = bdx_get_coalesce, + .set_coalesce = bdx_set_coalesce, + .get_ringparam = bdx_get_ringparam, + .set_ringparam = bdx_set_ringparam, + .get_strings = bdx_get_strings, + .get_sset_count = bdx_get_sset_count, + .get_ethtool_stats = bdx_get_ethtool_stats, + }; + + SET_ETHTOOL_OPS(netdev, &bdx_ethtool_ops); +} + +/** + * bdx_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * bdx_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit bdx_remove(struct pci_dev *pdev) +{ + struct pci_nic *nic = pci_get_drvdata(pdev); + struct net_device *ndev; + int port; + + for (port = 0; port < nic->port_num; port++) { + ndev = nic->priv[port]->ndev; + unregister_netdev(ndev); + free_netdev(ndev); + } + + /*bdx_hw_reset_direct(nic->regs); */ +#ifdef BDX_MSI + if (nic->irq_type == IRQ_MSI) + pci_disable_msi(pdev); +#endif + + iounmap(nic->regs); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + vfree(nic); + + RET(); +} + +static struct pci_driver bdx_pci_driver = { + .name = BDX_DRV_NAME, + .id_table = bdx_pci_tbl, + .probe = bdx_probe, + .remove = __devexit_p(bdx_remove), +}; + +/* + * print_driver_id - print parameters of the driver build + */ +static void __init print_driver_id(void) +{ + pr_info("%s, %s\n", BDX_DRV_DESC, BDX_DRV_VERSION); + pr_info("Options: hw_csum %s\n", BDX_MSI_STRING); +} + +static int __init bdx_module_init(void) +{ + ENTER; + init_txd_sizes(); + print_driver_id(); + RET(pci_register_driver(&bdx_pci_driver)); +} + +module_init(bdx_module_init); + +static void __exit bdx_module_exit(void) +{ + ENTER; + pci_unregister_driver(&bdx_pci_driver); + RET(); +} + +module_exit(bdx_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(BDX_DRV_DESC); +MODULE_FIRMWARE("tehuti/bdx.bin"); diff --git a/drivers/net/ethernet/tehuti/tehuti.h b/drivers/net/ethernet/tehuti/tehuti.h new file mode 100644 index 000000000000..709ebd6e28b4 --- /dev/null +++ b/drivers/net/ethernet/tehuti/tehuti.h @@ -0,0 +1,561 @@ +/* + * Tehuti Networks(R) Network Driver + * Copyright (C) 2007 Tehuti Networks Ltd. All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _TEHUTI_H +#define _TEHUTI_H + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/crc32.h> +#include <linux/uaccess.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/if_vlan.h> +#include <linux/interrupt.h> +#include <linux/vmalloc.h> +#include <linux/firmware.h> +#include <asm/byteorder.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +/* Compile Time Switches */ +/* start */ +#define BDX_TSO +#define BDX_LLTX +#define BDX_DELAY_WPTR +/* #define BDX_MSI */ +/* end */ + +#if !defined CONFIG_PCI_MSI +# undef BDX_MSI +#endif + +#define BDX_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK) + +/* ioctl ops */ +#define BDX_OP_READ 1 +#define BDX_OP_WRITE 2 + +/* RX copy break size */ +#define BDX_COPYBREAK 257 + +#define DRIVER_AUTHOR "Tehuti Networks(R)" +#define BDX_DRV_DESC "Tehuti Networks(R) Network Driver" +#define BDX_DRV_NAME "tehuti" +#define BDX_NIC_NAME "Tehuti 10 Giga TOE SmartNIC" +#define BDX_NIC2PORT_NAME "Tehuti 2-Port 10 Giga TOE SmartNIC" +#define BDX_DRV_VERSION "7.29.3" + +#ifdef BDX_MSI +# define BDX_MSI_STRING "msi " +#else +# define BDX_MSI_STRING "" +#endif + +/* netdev tx queue len for Luxor. default value is, btw, 1000 + * ifcontig eth1 txqueuelen 3000 - to change it at runtime */ +#define BDX_NDEV_TXQ_LEN 3000 + +#define FIFO_SIZE 4096 +#define FIFO_EXTRA_SPACE 1024 + +#if BITS_PER_LONG == 64 +# define H32_64(x) (u32) ((u64)(x) >> 32) +# define L32_64(x) (u32) ((u64)(x) & 0xffffffff) +#elif BITS_PER_LONG == 32 +# define H32_64(x) 0 +# define L32_64(x) ((u32) (x)) +#else /* BITS_PER_LONG == ?? */ +# error BITS_PER_LONG is undefined. Must be 64 or 32 +#endif /* BITS_PER_LONG */ + +#ifdef __BIG_ENDIAN +# define CPU_CHIP_SWAP32(x) swab32(x) +# define CPU_CHIP_SWAP16(x) swab16(x) +#else +# define CPU_CHIP_SWAP32(x) (x) +# define CPU_CHIP_SWAP16(x) (x) +#endif + +#define READ_REG(pp, reg) readl(pp->pBdxRegs + reg) +#define WRITE_REG(pp, reg, val) writel(val, pp->pBdxRegs + reg) + +#ifndef NET_IP_ALIGN +# define NET_IP_ALIGN 2 +#endif + +#ifndef NETDEV_TX_OK +# define NETDEV_TX_OK 0 +#endif + +#define LUXOR_MAX_PORT 2 +#define BDX_MAX_RX_DONE 150 +#define BDX_TXF_DESC_SZ 16 +#define BDX_MAX_TX_LEVEL (priv->txd_fifo0.m.memsz - 16) +#define BDX_MIN_TX_LEVEL 256 +#define BDX_NO_UPD_PACKETS 40 + +struct pci_nic { + int port_num; + void __iomem *regs; + int irq_type; + struct bdx_priv *priv[LUXOR_MAX_PORT]; +}; + +enum { IRQ_INTX, IRQ_MSI, IRQ_MSIX }; + +#define PCK_TH_MULT 128 +#define INT_COAL_MULT 2 + +#define BITS_MASK(nbits) ((1<<nbits)-1) +#define GET_BITS_SHIFT(x, nbits, nshift) (((x)>>nshift)&BITS_MASK(nbits)) +#define BITS_SHIFT_MASK(nbits, nshift) (BITS_MASK(nbits)<<nshift) +#define BITS_SHIFT_VAL(x, nbits, nshift) (((x)&BITS_MASK(nbits))<<nshift) +#define BITS_SHIFT_CLEAR(x, nbits, nshift) \ + ((x)&(~BITS_SHIFT_MASK(nbits, nshift))) + +#define GET_INT_COAL(x) GET_BITS_SHIFT(x, 15, 0) +#define GET_INT_COAL_RC(x) GET_BITS_SHIFT(x, 1, 15) +#define GET_RXF_TH(x) GET_BITS_SHIFT(x, 4, 16) +#define GET_PCK_TH(x) GET_BITS_SHIFT(x, 4, 20) + +#define INT_REG_VAL(coal, coal_rc, rxf_th, pck_th) \ + ((coal)|((coal_rc)<<15)|((rxf_th)<<16)|((pck_th)<<20)) + +struct fifo { + dma_addr_t da; /* physical address of fifo (used by HW) */ + char *va; /* virtual address of fifo (used by SW) */ + u32 rptr, wptr; /* cached values of RPTR and WPTR registers, + they're 32 bits on both 32 and 64 archs */ + u16 reg_CFG0, reg_CFG1; + u16 reg_RPTR, reg_WPTR; + u16 memsz; /* memory size allocated for fifo */ + u16 size_mask; + u16 pktsz; /* skb packet size to allocate */ + u16 rcvno; /* number of buffers that come from this RXF */ +}; + +struct txf_fifo { + struct fifo m; /* minimal set of variables used by all fifos */ +}; + +struct txd_fifo { + struct fifo m; /* minimal set of variables used by all fifos */ +}; + +struct rxf_fifo { + struct fifo m; /* minimal set of variables used by all fifos */ +}; + +struct rxd_fifo { + struct fifo m; /* minimal set of variables used by all fifos */ +}; + +struct rx_map { + u64 dma; + struct sk_buff *skb; +}; + +struct rxdb { + int *stack; + struct rx_map *elems; + int nelem; + int top; +}; + +union bdx_dma_addr { + dma_addr_t dma; + struct sk_buff *skb; +}; + +/* Entry in the db. + * if len == 0 addr is dma + * if len != 0 addr is skb */ +struct tx_map { + union bdx_dma_addr addr; + int len; +}; + +/* tx database - implemented as circular fifo buffer*/ +struct txdb { + struct tx_map *start; /* points to the first element */ + struct tx_map *end; /* points just AFTER the last element */ + struct tx_map *rptr; /* points to the next element to read */ + struct tx_map *wptr; /* points to the next element to write */ + int size; /* number of elements in the db */ +}; + +/*Internal stats structure*/ +struct bdx_stats { + u64 InUCast; /* 0x7200 */ + u64 InMCast; /* 0x7210 */ + u64 InBCast; /* 0x7220 */ + u64 InPkts; /* 0x7230 */ + u64 InErrors; /* 0x7240 */ + u64 InDropped; /* 0x7250 */ + u64 FrameTooLong; /* 0x7260 */ + u64 FrameSequenceErrors; /* 0x7270 */ + u64 InVLAN; /* 0x7280 */ + u64 InDroppedDFE; /* 0x7290 */ + u64 InDroppedIntFull; /* 0x72A0 */ + u64 InFrameAlignErrors; /* 0x72B0 */ + + /* 0x72C0-0x72E0 RSRV */ + + u64 OutUCast; /* 0x72F0 */ + u64 OutMCast; /* 0x7300 */ + u64 OutBCast; /* 0x7310 */ + u64 OutPkts; /* 0x7320 */ + + /* 0x7330-0x7360 RSRV */ + + u64 OutVLAN; /* 0x7370 */ + u64 InUCastOctects; /* 0x7380 */ + u64 OutUCastOctects; /* 0x7390 */ + + /* 0x73A0-0x73B0 RSRV */ + + u64 InBCastOctects; /* 0x73C0 */ + u64 OutBCastOctects; /* 0x73D0 */ + u64 InOctects; /* 0x73E0 */ + u64 OutOctects; /* 0x73F0 */ +}; + +struct bdx_priv { + void __iomem *pBdxRegs; + struct net_device *ndev; + + struct napi_struct napi; + + /* RX FIFOs: 1 for data (full) descs, and 2 for free descs */ + struct rxd_fifo rxd_fifo0; + struct rxf_fifo rxf_fifo0; + struct rxdb *rxdb; /* rx dbs to store skb pointers */ + int napi_stop; + + /* Tx FIFOs: 1 for data desc, 1 for empty (acks) desc */ + struct txd_fifo txd_fifo0; + struct txf_fifo txf_fifo0; + + struct txdb txdb; + int tx_level; +#ifdef BDX_DELAY_WPTR + int tx_update_mark; + int tx_noupd; +#endif + spinlock_t tx_lock; /* NETIF_F_LLTX mode */ + + /* rarely used */ + u8 port; + u32 msg_enable; + int stats_flag; + struct bdx_stats hw_stats; + struct pci_dev *pdev; + + struct pci_nic *nic; + + u8 txd_size; + u8 txf_size; + u8 rxd_size; + u8 rxf_size; + u32 rdintcm; + u32 tdintcm; +}; + +/* RX FREE descriptor - 64bit*/ +struct rxf_desc { + u32 info; /* Buffer Count + Info - described below */ + u32 va_lo; /* VAdr[31:0] */ + u32 va_hi; /* VAdr[63:32] */ + u32 pa_lo; /* PAdr[31:0] */ + u32 pa_hi; /* PAdr[63:32] */ + u32 len; /* Buffer Length */ +}; + +#define GET_RXD_BC(x) GET_BITS_SHIFT((x), 5, 0) +#define GET_RXD_RXFQ(x) GET_BITS_SHIFT((x), 2, 8) +#define GET_RXD_TO(x) GET_BITS_SHIFT((x), 1, 15) +#define GET_RXD_TYPE(x) GET_BITS_SHIFT((x), 4, 16) +#define GET_RXD_ERR(x) GET_BITS_SHIFT((x), 6, 21) +#define GET_RXD_RXP(x) GET_BITS_SHIFT((x), 1, 27) +#define GET_RXD_PKT_ID(x) GET_BITS_SHIFT((x), 3, 28) +#define GET_RXD_VTAG(x) GET_BITS_SHIFT((x), 1, 31) +#define GET_RXD_VLAN_ID(x) GET_BITS_SHIFT((x), 12, 0) +#define GET_RXD_VLAN_TCI(x) GET_BITS_SHIFT((x), 16, 0) +#define GET_RXD_CFI(x) GET_BITS_SHIFT((x), 1, 12) +#define GET_RXD_PRIO(x) GET_BITS_SHIFT((x), 3, 13) + +struct rxd_desc { + u32 rxd_val1; + u16 len; + u16 rxd_vlan; + u32 va_lo; + u32 va_hi; +}; + +/* PBL describes each virtual buffer to be */ +/* transmitted from the host.*/ +struct pbl { + u32 pa_lo; + u32 pa_hi; + u32 len; +}; + +/* First word for TXD descriptor. It means: type = 3 for regular Tx packet, + * hw_csum = 7 for ip+udp+tcp hw checksums */ +#define TXD_W1_VAL(bc, checksum, vtag, lgsnd, vlan_id) \ + ((bc) | ((checksum)<<5) | ((vtag)<<8) | \ + ((lgsnd)<<9) | (0x30000) | ((vlan_id)<<20)) + +struct txd_desc { + u32 txd_val1; + u16 mss; + u16 length; + u32 va_lo; + u32 va_hi; + struct pbl pbl[0]; /* Fragments */ +} __packed; + +/* Register region size */ +#define BDX_REGS_SIZE 0x1000 + +/* Registers from 0x0000-0x00fc were remapped to 0x4000-0x40fc */ +#define regTXD_CFG1_0 0x4000 +#define regRXF_CFG1_0 0x4010 +#define regRXD_CFG1_0 0x4020 +#define regTXF_CFG1_0 0x4030 +#define regTXD_CFG0_0 0x4040 +#define regRXF_CFG0_0 0x4050 +#define regRXD_CFG0_0 0x4060 +#define regTXF_CFG0_0 0x4070 +#define regTXD_WPTR_0 0x4080 +#define regRXF_WPTR_0 0x4090 +#define regRXD_WPTR_0 0x40A0 +#define regTXF_WPTR_0 0x40B0 +#define regTXD_RPTR_0 0x40C0 +#define regRXF_RPTR_0 0x40D0 +#define regRXD_RPTR_0 0x40E0 +#define regTXF_RPTR_0 0x40F0 +#define regTXF_RPTR_3 0x40FC + +/* hardware versioning */ +#define FW_VER 0x5010 +#define SROM_VER 0x5020 +#define FPGA_VER 0x5030 +#define FPGA_SEED 0x5040 + +/* Registers from 0x0100-0x0150 were remapped to 0x5100-0x5150 */ +#define regISR regISR0 +#define regISR0 0x5100 + +#define regIMR regIMR0 +#define regIMR0 0x5110 + +#define regRDINTCM0 0x5120 +#define regRDINTCM2 0x5128 + +#define regTDINTCM0 0x5130 + +#define regISR_MSK0 0x5140 + +#define regINIT_SEMAPHORE 0x5170 +#define regINIT_STATUS 0x5180 + +#define regMAC_LNK_STAT 0x0200 +#define MAC_LINK_STAT 0x4 /* Link state */ + +#define regGMAC_RXF_A 0x1240 + +#define regUNC_MAC0_A 0x1250 +#define regUNC_MAC1_A 0x1260 +#define regUNC_MAC2_A 0x1270 + +#define regVLAN_0 0x1800 + +#define regMAX_FRAME_A 0x12C0 + +#define regRX_MAC_MCST0 0x1A80 +#define regRX_MAC_MCST1 0x1A84 +#define MAC_MCST_NUM 15 +#define regRX_MCST_HASH0 0x1A00 +#define MAC_MCST_HASH_NUM 8 + +#define regVPC 0x2300 +#define regVIC 0x2320 +#define regVGLB 0x2340 + +#define regCLKPLL 0x5000 + +/*for 10G only*/ +#define regREVISION 0x6000 +#define regSCRATCH 0x6004 +#define regCTRLST 0x6008 +#define regMAC_ADDR_0 0x600C +#define regMAC_ADDR_1 0x6010 +#define regFRM_LENGTH 0x6014 +#define regPAUSE_QUANT 0x6018 +#define regRX_FIFO_SECTION 0x601C +#define regTX_FIFO_SECTION 0x6020 +#define regRX_FULLNESS 0x6024 +#define regTX_FULLNESS 0x6028 +#define regHASHTABLE 0x602C +#define regMDIO_ST 0x6030 +#define regMDIO_CTL 0x6034 +#define regMDIO_DATA 0x6038 +#define regMDIO_ADDR 0x603C + +#define regRST_PORT 0x7000 +#define regDIS_PORT 0x7010 +#define regRST_QU 0x7020 +#define regDIS_QU 0x7030 + +#define regCTRLST_TX_ENA 0x0001 +#define regCTRLST_RX_ENA 0x0002 +#define regCTRLST_PRM_ENA 0x0010 +#define regCTRLST_PAD_ENA 0x0020 + +#define regCTRLST_BASE (regCTRLST_PAD_ENA|regCTRLST_PRM_ENA) + +#define regRX_FLT 0x1400 + +/* TXD TXF RXF RXD CONFIG 0x0000 --- 0x007c*/ +#define TX_RX_CFG1_BASE 0xffffffff /*0-31 */ +#define TX_RX_CFG0_BASE 0xfffff000 /*31:12 */ +#define TX_RX_CFG0_RSVD 0x0ffc /*11:2 */ +#define TX_RX_CFG0_SIZE 0x0003 /*1:0 */ + +/* TXD TXF RXF RXD WRITE 0x0080 --- 0x00BC */ +#define TXF_WPTR_WR_PTR 0x7ff8 /*14:3 */ + +/* TXD TXF RXF RXD READ 0x00CO --- 0x00FC */ +#define TXF_RPTR_RD_PTR 0x7ff8 /*14:3 */ + +#define TXF_WPTR_MASK 0x7ff0 /* last 4 bits are dropped + * size is rounded to 16 */ + +/* regISR 0x0100 */ +/* regIMR 0x0110 */ +#define IMR_INPROG 0x80000000 /*31 */ +#define IR_LNKCHG1 0x10000000 /*28 */ +#define IR_LNKCHG0 0x08000000 /*27 */ +#define IR_GPIO 0x04000000 /*26 */ +#define IR_RFRSH 0x02000000 /*25 */ +#define IR_RSVD 0x01000000 /*24 */ +#define IR_SWI 0x00800000 /*23 */ +#define IR_RX_FREE_3 0x00400000 /*22 */ +#define IR_RX_FREE_2 0x00200000 /*21 */ +#define IR_RX_FREE_1 0x00100000 /*20 */ +#define IR_RX_FREE_0 0x00080000 /*19 */ +#define IR_TX_FREE_3 0x00040000 /*18 */ +#define IR_TX_FREE_2 0x00020000 /*17 */ +#define IR_TX_FREE_1 0x00010000 /*16 */ +#define IR_TX_FREE_0 0x00008000 /*15 */ +#define IR_RX_DESC_3 0x00004000 /*14 */ +#define IR_RX_DESC_2 0x00002000 /*13 */ +#define IR_RX_DESC_1 0x00001000 /*12 */ +#define IR_RX_DESC_0 0x00000800 /*11 */ +#define IR_PSE 0x00000400 /*10 */ +#define IR_TMR3 0x00000200 /*9 */ +#define IR_TMR2 0x00000100 /*8 */ +#define IR_TMR1 0x00000080 /*7 */ +#define IR_TMR0 0x00000040 /*6 */ +#define IR_VNT 0x00000020 /*5 */ +#define IR_RxFL 0x00000010 /*4 */ +#define IR_SDPERR 0x00000008 /*3 */ +#define IR_TR 0x00000004 /*2 */ +#define IR_PCIE_LINK 0x00000002 /*1 */ +#define IR_PCIE_TOUT 0x00000001 /*0 */ + +#define IR_EXTRA (IR_RX_FREE_0 | IR_LNKCHG0 | IR_PSE | \ + IR_TMR0 | IR_PCIE_LINK | IR_PCIE_TOUT) +#define IR_RUN (IR_EXTRA | IR_RX_DESC_0 | IR_TX_FREE_0) +#define IR_ALL 0xfdfffff7 + +#define IR_LNKCHG0_ofst 27 + +#define GMAC_RX_FILTER_OSEN 0x1000 /* shared OS enable */ +#define GMAC_RX_FILTER_TXFC 0x0400 /* Tx flow control */ +#define GMAC_RX_FILTER_RSV0 0x0200 /* reserved */ +#define GMAC_RX_FILTER_FDA 0x0100 /* filter out direct address */ +#define GMAC_RX_FILTER_AOF 0x0080 /* accept over run */ +#define GMAC_RX_FILTER_ACF 0x0040 /* accept control frames */ +#define GMAC_RX_FILTER_ARUNT 0x0020 /* accept under run */ +#define GMAC_RX_FILTER_ACRC 0x0010 /* accept crc error */ +#define GMAC_RX_FILTER_AM 0x0008 /* accept multicast */ +#define GMAC_RX_FILTER_AB 0x0004 /* accept broadcast */ +#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscuous mode */ + +#define MAX_FRAME_AB_VAL 0x3fff /* 13:0 */ + +#define CLKPLL_PLLLKD 0x0200 /*9 */ +#define CLKPLL_RSTEND 0x0100 /*8 */ +#define CLKPLL_SFTRST 0x0001 /*0 */ + +#define CLKPLL_LKD (CLKPLL_PLLLKD|CLKPLL_RSTEND) + +/* + * PCI-E Device Control Register (Offset 0x88) + * Source: Luxor Data Sheet, 7.1.3.3.3 + */ +#define PCI_DEV_CTRL_REG 0x88 +#define GET_DEV_CTRL_MAXPL(x) GET_BITS_SHIFT(x, 3, 5) +#define GET_DEV_CTRL_MRRS(x) GET_BITS_SHIFT(x, 3, 12) + +/* + * PCI-E Link Status Register (Offset 0x92) + * Source: Luxor Data Sheet, 7.1.3.3.7 + */ +#define PCI_LINK_STATUS_REG 0x92 +#define GET_LINK_STATUS_LANES(x) GET_BITS_SHIFT(x, 6, 4) + +/* Debugging Macros */ + +#define DBG2(fmt, args...) \ + pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args) + +#define BDX_ASSERT(x) BUG_ON(x) + +#ifdef DEBUG + +#define ENTER \ +do { \ + pr_err("%s:%-5d: ENTER\n", __func__, __LINE__); \ +} while (0) + +#define RET(args...) \ +do { \ + pr_err("%s:%-5d: RETURN\n", __func__, __LINE__); \ + return args; \ +} while (0) + +#define DBG(fmt, args...) \ + pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args) +#else +#define ENTER do { } while (0) +#define RET(args...) return args +#define DBG(fmt, args...) \ +do { \ + if (0) \ + pr_err(fmt, ##args); \ +} while (0) +#endif + +#endif /* _BDX__H */ |