diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/pci-skeleton.c | |
download | linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/pci-skeleton.c')
-rw-r--r-- | drivers/net/pci-skeleton.c | 1977 |
1 files changed, 1977 insertions, 0 deletions
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c new file mode 100644 index 000000000000..bb1c3d8981ee --- /dev/null +++ b/drivers/net/pci-skeleton.c @@ -0,0 +1,1977 @@ +/* + + drivers/net/pci-skeleton.c + + Maintained by Jeff Garzik <jgarzik@pobox.com> + + Original code came from 8139too.c, which in turns was based + originally on Donald Becker's rtl8139.c driver, versions 1.11 + and older. This driver was originally based on rtl8139.c + version 1.07. Header of rtl8139.c version 1.11: + + -----<snip>----- + + Written 1997-2000 by Donald Becker. + This software may be used and distributed according to the + terms of the GNU General Public License (GPL), incorporated + herein by reference. Drivers based on or derived from this + code fall under the GPL and must retain the authorship, + copyright and license notice. This file is not a complete + program and may only be used when the entire operating + system is licensed under the GPL. + + This driver is for boards based on the RTL8129 and RTL8139 + PCI ethernet chips. + + The author may be reached as becker@scyld.com, or C/O Scyld + Computing Corporation 410 Severn Ave., Suite 210 Annapolis + MD 21403 + + Support and updates available at + http://www.scyld.com/network/rtl8139.html + + Twister-tuning table provided by Kinston + <shangh@realtek.com.tw>. + + -----<snip>----- + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + +----------------------------------------------------------------------------- + + Theory of Operation + +I. Board Compatibility + +This device driver is designed for the RealTek RTL8139 series, the RealTek +Fast Ethernet controllers for PCI and CardBus. This chip is used on many +low-end boards, sometimes with its markings changed. + + +II. Board-specific settings + +PCI bus devices are configured by the system at boot time, so no jumpers +need to be set on the board. The system BIOS will assign the +PCI INTA signal to a (preferably otherwise unused) system IRQ line. + +III. Driver operation + +IIIa. Rx Ring buffers + +The receive unit uses a single linear ring buffer rather than the more +common (and more efficient) descriptor-based architecture. Incoming frames +are sequentially stored into the Rx region, and the host copies them into +skbuffs. + +Comment: While it is theoretically possible to process many frames in place, +any delay in Rx processing would cause us to drop frames. More importantly, +the Linux protocol stack is not designed to operate in this manner. + +IIIb. Tx operation + +The RTL8139 uses a fixed set of four Tx descriptors in register space. +In a stunningly bad design choice, Tx frames must be 32 bit aligned. Linux +aligns the IP header on word boundaries, and 14 byte ethernet header means +that almost all frames will need to be copied to an alignment buffer. + +IVb. References + +http://www.realtek.com.tw/cn/cn.html +http://www.scyld.com/expert/NWay.html + +IVc. Errata + +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/crc32.h> +#include <asm/io.h> + +#define NETDRV_VERSION "1.0.0" +#define MODNAME "netdrv" +#define NETDRV_DRIVER_LOAD_MSG "MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded" +#define PFX MODNAME ": " + +static char version[] __devinitdata = +KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n" +KERN_INFO " Support available from http://foo.com/bar/baz.html\n"; + +/* define to 1 to enable PIO instead of MMIO */ +#undef USE_IO_OPS + +/* define to 1 to enable copious debugging info */ +#undef NETDRV_DEBUG + +/* define to 1 to disable lightweight runtime debugging checks */ +#undef NETDRV_NDEBUG + + +#ifdef NETDRV_DEBUG +/* note: prints function name for you */ +# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args) +#else +# define DPRINTK(fmt, args...) +#endif + +#ifdef NETDRV_NDEBUG +# define assert(expr) do {} while (0) +#else +# define assert(expr) \ + if(!(expr)) { \ + printk( "Assertion failed! %s,%s,%s,line=%d\n", \ + #expr,__FILE__,__FUNCTION__,__LINE__); \ + } +#endif + + +/* A few user-configurable values. */ +/* media options */ +static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1}; + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 20; + +/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + The RTL chips use a 64 element hash table based on the Ethernet CRC. */ +static int multicast_filter_limit = 32; + +/* Size of the in-memory receive ring. */ +#define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */ +#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX) +#define RX_BUF_PAD 16 +#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */ +#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD) + +/* Number of Tx descriptor registers. */ +#define NUM_TX_DESC 4 + +/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/ +#define MAX_ETH_FRAME_SIZE 1536 + +/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */ +#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE +#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC) + +/* PCI Tuning Parameters + Threshold is bytes transferred to chip before transmission starts. */ +#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */ + +/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */ +#define RX_FIFO_THRESH 6 /* Rx buffer level before first PCI xfer. */ +#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ +#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ + + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (6*HZ) + + +enum { + HAS_CHIP_XCVR = 0x020000, + HAS_LNK_CHNG = 0x040000, +}; + +#define NETDRV_MIN_IO_SIZE 0x80 +#define RTL8139B_IO_SIZE 256 + +#define NETDRV_CAPS HAS_CHIP_XCVR|HAS_LNK_CHNG + +typedef enum { + RTL8139 = 0, + NETDRV_CB, + SMC1211TX, + /*MPX5030,*/ + DELTA8139, + ADDTRON8139, +} board_t; + + +/* indexed by board_t, above */ +static struct { + const char *name; +} board_info[] __devinitdata = { + { "RealTek RTL8139 Fast Ethernet" }, + { "RealTek RTL8139B PCI/CardBus" }, + { "SMC1211TX EZCard 10/100 (RealTek RTL8139)" }, +/* { MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/ + { "Delta Electronics 8139 10/100BaseTX" }, + { "Addtron Technolgy 8139 10/100BaseTX" }, +}; + + +static struct pci_device_id netdrv_pci_tbl[] = { + {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB }, + {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX }, +/* {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MPX5030 },*/ + {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DELTA8139 }, + {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 }, + {0,} +}; +MODULE_DEVICE_TABLE (pci, netdrv_pci_tbl); + + +/* The rest of these values should never change. */ + +/* Symbolic offsets to registers. */ +enum NETDRV_registers { + MAC0 = 0, /* Ethernet hardware address. */ + MAR0 = 8, /* Multicast filter. */ + TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */ + TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */ + RxBuf = 0x30, + RxEarlyCnt = 0x34, + RxEarlyStatus = 0x36, + ChipCmd = 0x37, + RxBufPtr = 0x38, + RxBufAddr = 0x3A, + IntrMask = 0x3C, + IntrStatus = 0x3E, + TxConfig = 0x40, + ChipVersion = 0x43, + RxConfig = 0x44, + Timer = 0x48, /* A general-purpose counter. */ + RxMissed = 0x4C, /* 24 bits valid, write clears. */ + Cfg9346 = 0x50, + Config0 = 0x51, + Config1 = 0x52, + FlashReg = 0x54, + MediaStatus = 0x58, + Config3 = 0x59, + Config4 = 0x5A, /* absent on RTL-8139A */ + HltClk = 0x5B, + MultiIntr = 0x5C, + TxSummary = 0x60, + BasicModeCtrl = 0x62, + BasicModeStatus = 0x64, + NWayAdvert = 0x66, + NWayLPAR = 0x68, + NWayExpansion = 0x6A, + /* Undocumented registers, but required for proper operation. */ + FIFOTMS = 0x70, /* FIFO Control and test. */ + CSCR = 0x74, /* Chip Status and Configuration Register. */ + PARA78 = 0x78, + PARA7c = 0x7c, /* Magic transceiver parameter register. */ + Config5 = 0xD8, /* absent on RTL-8139A */ +}; + +enum ClearBitMasks { + MultiIntrClear = 0xF000, + ChipCmdClear = 0xE2, + Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1), +}; + +enum ChipCmdBits { + CmdReset = 0x10, + CmdRxEnb = 0x08, + CmdTxEnb = 0x04, + RxBufEmpty = 0x01, +}; + +/* Interrupt register bits, using my own meaningful names. */ +enum IntrStatusBits { + PCIErr = 0x8000, + PCSTimeout = 0x4000, + RxFIFOOver = 0x40, + RxUnderrun = 0x20, + RxOverflow = 0x10, + TxErr = 0x08, + TxOK = 0x04, + RxErr = 0x02, + RxOK = 0x01, +}; +enum TxStatusBits { + TxHostOwns = 0x2000, + TxUnderrun = 0x4000, + TxStatOK = 0x8000, + TxOutOfWindow = 0x20000000, + TxAborted = 0x40000000, + TxCarrierLost = 0x80000000, +}; +enum RxStatusBits { + RxMulticast = 0x8000, + RxPhysical = 0x4000, + RxBroadcast = 0x2000, + RxBadSymbol = 0x0020, + RxRunt = 0x0010, + RxTooLong = 0x0008, + RxCRCErr = 0x0004, + RxBadAlign = 0x0002, + RxStatusOK = 0x0001, +}; + +/* Bits in RxConfig. */ +enum rx_mode_bits { + AcceptErr = 0x20, + AcceptRunt = 0x10, + AcceptBroadcast = 0x08, + AcceptMulticast = 0x04, + AcceptMyPhys = 0x02, + AcceptAllPhys = 0x01, +}; + +/* Bits in TxConfig. */ +enum tx_config_bits { + TxIFG1 = (1 << 25), /* Interframe Gap Time */ + TxIFG0 = (1 << 24), /* Enabling these bits violates IEEE 802.3 */ + TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */ + TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */ + TxClearAbt = (1 << 0), /* Clear abort (WO) */ + TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ + + TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */ +}; + +/* Bits in Config1 */ +enum Config1Bits { + Cfg1_PM_Enable = 0x01, + Cfg1_VPD_Enable = 0x02, + Cfg1_PIO = 0x04, + Cfg1_MMIO = 0x08, + Cfg1_LWAKE = 0x10, + Cfg1_Driver_Load = 0x20, + Cfg1_LED0 = 0x40, + Cfg1_LED1 = 0x80, +}; + +enum RxConfigBits { + /* Early Rx threshold, none or X/16 */ + RxCfgEarlyRxNone = 0, + RxCfgEarlyRxShift = 24, + + /* rx fifo threshold */ + RxCfgFIFOShift = 13, + RxCfgFIFONone = (7 << RxCfgFIFOShift), + + /* Max DMA burst */ + RxCfgDMAShift = 8, + RxCfgDMAUnlimited = (7 << RxCfgDMAShift), + + /* rx ring buffer length */ + RxCfgRcv8K = 0, + RxCfgRcv16K = (1 << 11), + RxCfgRcv32K = (1 << 12), + RxCfgRcv64K = (1 << 11) | (1 << 12), + + /* Disable packet wrap at end of Rx buffer */ + RxNoWrap = (1 << 7), +}; + + +/* Twister tuning parameters from RealTek. + Completely undocumented, but required to tune bad links. */ +enum CSCRBits { + CSCR_LinkOKBit = 0x0400, + CSCR_LinkChangeBit = 0x0800, + CSCR_LinkStatusBits = 0x0f000, + CSCR_LinkDownOffCmd = 0x003c0, + CSCR_LinkDownCmd = 0x0f3c0, +}; + + +enum Cfg9346Bits { + Cfg9346_Lock = 0x00, + Cfg9346_Unlock = 0xC0, +}; + + +#define PARA78_default 0x78fa8388 +#define PARA7c_default 0xcb38de43 /* param[0][3] */ +#define PARA7c_xxx 0xcb38de43 +static const unsigned long param[4][4] = { + {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43}, + {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, + {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, + {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83} +}; + +struct ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; + + +typedef enum { + CH_8139 = 0, + CH_8139_K, + CH_8139A, + CH_8139B, + CH_8130, + CH_8139C, +} chip_t; + + +/* directly indexed by chip_t, above */ +const static struct { + const char *name; + u8 version; /* from RTL8139C docs */ + u32 RxConfigMask; /* should clear the bits supported by this chip */ +} rtl_chip_info[] = { + { "RTL-8139", + 0x40, + 0xf0fe0040, /* XXX copied from RTL8139A, verify */ + }, + + { "RTL-8139 rev K", + 0x60, + 0xf0fe0040, + }, + + { "RTL-8139A", + 0x70, + 0xf0fe0040, + }, + + { "RTL-8139B", + 0x78, + 0xf0fc0040 + }, + + { "RTL-8130", + 0x7C, + 0xf0fe0040, /* XXX copied from RTL8139A, verify */ + }, + + { "RTL-8139C", + 0x74, + 0xf0fc0040, /* XXX copied from RTL8139B, verify */ + }, + +}; + + +struct netdrv_private { + board_t board; + void *mmio_addr; + int drv_flags; + struct pci_dev *pci_dev; + struct net_device_stats stats; + struct timer_list timer; /* Media selection timer. */ + unsigned char *rx_ring; + unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */ + unsigned int tx_flag; + atomic_t cur_tx; + atomic_t dirty_tx; + /* The saved address of a sent-in-place packet/buffer, for skfree(). */ + struct ring_info tx_info[NUM_TX_DESC]; + unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */ + unsigned char *tx_bufs; /* Tx bounce buffer region. */ + dma_addr_t rx_ring_dma; + dma_addr_t tx_bufs_dma; + char phys[4]; /* MII device addresses. */ + char twistie, twist_row, twist_col; /* Twister tune state. */ + unsigned int full_duplex:1; /* Full-duplex operation requested. */ + unsigned int duplex_lock:1; + unsigned int default_port:4; /* Last dev->if_port value. */ + unsigned int media2:4; /* Secondary monitored media port. */ + unsigned int medialock:1; /* Don't sense media type. */ + unsigned int mediasense:1; /* Media sensing in progress. */ + spinlock_t lock; + chip_t chipset; +}; + +MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>"); +MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_PARM (multicast_filter_limit, "i"); +MODULE_PARM (max_interrupt_work, "i"); +MODULE_PARM (media, "1-" __MODULE_STRING(8) "i"); +MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses"); +MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt"); +MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex"); + +static int read_eeprom (void *ioaddr, int location, int addr_len); +static int netdrv_open (struct net_device *dev); +static int mdio_read (struct net_device *dev, int phy_id, int location); +static void mdio_write (struct net_device *dev, int phy_id, int location, + int val); +static void netdrv_timer (unsigned long data); +static void netdrv_tx_timeout (struct net_device *dev); +static void netdrv_init_ring (struct net_device *dev); +static int netdrv_start_xmit (struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t netdrv_interrupt (int irq, void *dev_instance, + struct pt_regs *regs); +static int netdrv_close (struct net_device *dev); +static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); +static struct net_device_stats *netdrv_get_stats (struct net_device *dev); +static void netdrv_set_rx_mode (struct net_device *dev); +static void netdrv_hw_start (struct net_device *dev); + + +#ifdef USE_IO_OPS + +#define NETDRV_R8(reg) inb (((unsigned long)ioaddr) + (reg)) +#define NETDRV_R16(reg) inw (((unsigned long)ioaddr) + (reg)) +#define NETDRV_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg))) +#define NETDRV_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg)) +#define NETDRV_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg)) +#define NETDRV_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg)) +#define NETDRV_W8_F NETDRV_W8 +#define NETDRV_W16_F NETDRV_W16 +#define NETDRV_W32_F NETDRV_W32 +#undef readb +#undef readw +#undef readl +#undef writeb +#undef writew +#undef writel +#define readb(addr) inb((unsigned long)(addr)) +#define readw(addr) inw((unsigned long)(addr)) +#define readl(addr) inl((unsigned long)(addr)) +#define writeb(val,addr) outb((val),(unsigned long)(addr)) +#define writew(val,addr) outw((val),(unsigned long)(addr)) +#define writel(val,addr) outl((val),(unsigned long)(addr)) + +#else + +/* write MMIO register, with flush */ +/* Flush avoids rtl8139 bug w/ posted MMIO writes */ +#define NETDRV_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0) +#define NETDRV_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0) +#define NETDRV_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0) + + +#if MMIO_FLUSH_AUDIT_COMPLETE + +/* write MMIO register */ +#define NETDRV_W8(reg, val8) writeb ((val8), ioaddr + (reg)) +#define NETDRV_W16(reg, val16) writew ((val16), ioaddr + (reg)) +#define NETDRV_W32(reg, val32) writel ((val32), ioaddr + (reg)) + +#else + +/* write MMIO register, then flush */ +#define NETDRV_W8 NETDRV_W8_F +#define NETDRV_W16 NETDRV_W16_F +#define NETDRV_W32 NETDRV_W32_F + +#endif /* MMIO_FLUSH_AUDIT_COMPLETE */ + +/* read MMIO register */ +#define NETDRV_R8(reg) readb (ioaddr + (reg)) +#define NETDRV_R16(reg) readw (ioaddr + (reg)) +#define NETDRV_R32(reg) ((unsigned long) readl (ioaddr + (reg))) + +#endif /* USE_IO_OPS */ + + +static const u16 netdrv_intr_mask = + PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | + TxErr | TxOK | RxErr | RxOK; + +static const unsigned int netdrv_rx_config = + RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap | + (RX_FIFO_THRESH << RxCfgFIFOShift) | + (RX_DMA_BURST << RxCfgDMAShift); + + +static int __devinit netdrv_init_board (struct pci_dev *pdev, + struct net_device **dev_out, + void **ioaddr_out) +{ + void *ioaddr = NULL; + struct net_device *dev; + struct netdrv_private *tp; + int rc, i; + u32 pio_start, pio_end, pio_flags, pio_len; + unsigned long mmio_start, mmio_end, mmio_flags, mmio_len; + u32 tmp; + + DPRINTK ("ENTER\n"); + + assert (pdev != NULL); + assert (ioaddr_out != NULL); + + *ioaddr_out = NULL; + *dev_out = NULL; + + /* dev zeroed in alloc_etherdev */ + dev = alloc_etherdev (sizeof (*tp)); + if (dev == NULL) { + printk (KERN_ERR PFX "unable to alloc new ethernet\n"); + DPRINTK ("EXIT, returning -ENOMEM\n"); + return -ENOMEM; + } + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + tp = dev->priv; + + /* enable device (incl. PCI PM wakeup), and bus-mastering */ + rc = pci_enable_device (pdev); + if (rc) + goto err_out; + + pio_start = pci_resource_start (pdev, 0); + pio_end = pci_resource_end (pdev, 0); + pio_flags = pci_resource_flags (pdev, 0); + pio_len = pci_resource_len (pdev, 0); + + mmio_start = pci_resource_start (pdev, 1); + mmio_end = pci_resource_end (pdev, 1); + mmio_flags = pci_resource_flags (pdev, 1); + mmio_len = pci_resource_len (pdev, 1); + + /* set this immediately, we need to know before + * we talk to the chip directly */ + DPRINTK("PIO region size == 0x%02X\n", pio_len); + DPRINTK("MMIO region size == 0x%02lX\n", mmio_len); + + /* make sure PCI base addr 0 is PIO */ + if (!(pio_flags & IORESOURCE_IO)) { + printk (KERN_ERR PFX "region #0 not a PIO resource, aborting\n"); + rc = -ENODEV; + goto err_out; + } + + /* make sure PCI base addr 1 is MMIO */ + if (!(mmio_flags & IORESOURCE_MEM)) { + printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n"); + rc = -ENODEV; + goto err_out; + } + + /* check for weird/broken PCI region reporting */ + if ((pio_len < NETDRV_MIN_IO_SIZE) || + (mmio_len < NETDRV_MIN_IO_SIZE)) { + printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); + rc = -ENODEV; + goto err_out; + } + + rc = pci_request_regions (pdev, "pci-skeleton"); + if (rc) + goto err_out; + + pci_set_master (pdev); + +#ifdef USE_IO_OPS + ioaddr = (void *) pio_start; +#else + /* ioremap MMIO region */ + ioaddr = ioremap (mmio_start, mmio_len); + if (ioaddr == NULL) { + printk (KERN_ERR PFX "cannot remap MMIO, aborting\n"); + rc = -EIO; + goto err_out_free_res; + } +#endif /* USE_IO_OPS */ + + /* Soft reset the chip. */ + NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset); + + /* Check that the chip has finished the reset. */ + for (i = 1000; i > 0; i--) + if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0) + break; + else + udelay (10); + + /* Bring the chip out of low-power mode. */ + /* <insert device-specific code here> */ + +#ifndef USE_IO_OPS + /* sanity checks -- ensure PIO and MMIO registers agree */ + assert (inb (pio_start+Config0) == readb (ioaddr+Config0)); + assert (inb (pio_start+Config1) == readb (ioaddr+Config1)); + assert (inb (pio_start+TxConfig) == readb (ioaddr+TxConfig)); + assert (inb (pio_start+RxConfig) == readb (ioaddr+RxConfig)); +#endif /* !USE_IO_OPS */ + + /* identify chip attached to board */ + tmp = NETDRV_R8 (ChipVersion); + for (i = ARRAY_SIZE (rtl_chip_info) - 1; i >= 0; i--) + if (tmp == rtl_chip_info[i].version) { + tp->chipset = i; + goto match; + } + + /* if unknown chip, assume array element #0, original RTL-8139 in this case */ + printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8139\n", + pci_name(pdev)); + printk (KERN_DEBUG PFX "PCI device %s: TxConfig = 0x%lx\n", pci_name(pdev), NETDRV_R32 (TxConfig)); + tp->chipset = 0; + +match: + DPRINTK ("chipset id (%d) == index %d, '%s'\n", + tmp, + tp->chipset, + rtl_chip_info[tp->chipset].name); + + i = register_netdev (dev); + if (i) + goto err_out_unmap; + + DPRINTK ("EXIT, returning 0\n"); + *ioaddr_out = ioaddr; + *dev_out = dev; + return 0; + +err_out_unmap: +#ifndef USE_IO_OPS + iounmap(ioaddr); +err_out_free_res: +#endif + pci_release_regions (pdev); +err_out: + free_netdev (dev); + DPRINTK ("EXIT, returning %d\n", rc); + return rc; +} + + +static int __devinit netdrv_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev = NULL; + struct netdrv_private *tp; + int i, addr_len, option; + void *ioaddr = NULL; + static int board_idx = -1; + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + static int printed_version; + if (!printed_version++) + printk(version); +#endif + + DPRINTK ("ENTER\n"); + + assert (pdev != NULL); + assert (ent != NULL); + + board_idx++; + + i = netdrv_init_board (pdev, &dev, &ioaddr); + if (i < 0) { + DPRINTK ("EXIT, returning %d\n", i); + return i; + } + + tp = dev->priv; + + assert (ioaddr != NULL); + assert (dev != NULL); + assert (tp != NULL); + + addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6; + for (i = 0; i < 3; i++) + ((u16 *) (dev->dev_addr))[i] = + le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len)); + + /* The Rtl8139-specific entries in the device structure. */ + dev->open = netdrv_open; + dev->hard_start_xmit = netdrv_start_xmit; + dev->stop = netdrv_close; + dev->get_stats = netdrv_get_stats; + dev->set_multicast_list = netdrv_set_rx_mode; + dev->do_ioctl = netdrv_ioctl; + dev->tx_timeout = netdrv_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + dev->irq = pdev->irq; + dev->base_addr = (unsigned long) ioaddr; + + /* dev->priv/tp zeroed and aligned in alloc_etherdev */ + tp = dev->priv; + + /* note: tp->chipset set in netdrv_init_board */ + tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | NETDRV_CAPS; + tp->pci_dev = pdev; + tp->board = ent->driver_data; + tp->mmio_addr = ioaddr; + spin_lock_init(&tp->lock); + + pci_set_drvdata(pdev, dev); + + tp->phys[0] = 32; + + printk (KERN_INFO "%s: %s at 0x%lx, " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " + "IRQ %d\n", + dev->name, + board_info[ent->driver_data].name, + dev->base_addr, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5], + dev->irq); + + printk (KERN_DEBUG "%s: Identified 8139 chip type '%s'\n", + dev->name, rtl_chip_info[tp->chipset].name); + + /* Put the chip into low-power mode. */ + NETDRV_W8_F (Cfg9346, Cfg9346_Unlock); + + /* The lower four bits are the media type. */ + option = (board_idx > 7) ? 0 : media[board_idx]; + if (option > 0) { + tp->full_duplex = (option & 0x200) ? 1 : 0; + tp->default_port = option & 15; + if (tp->default_port) + tp->medialock = 1; + } + + if (tp->full_duplex) { + printk (KERN_INFO + "%s: Media type forced to Full Duplex.\n", + dev->name); + mdio_write (dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL); + tp->duplex_lock = 1; + } + + DPRINTK ("EXIT - returning 0\n"); + return 0; +} + + +static void __devexit netdrv_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdrv_private *np; + + DPRINTK ("ENTER\n"); + + assert (dev != NULL); + + np = dev->priv; + assert (np != NULL); + + unregister_netdev (dev); + +#ifndef USE_IO_OPS + iounmap (np->mmio_addr); +#endif /* !USE_IO_OPS */ + + pci_release_regions (pdev); + + free_netdev (dev); + + pci_set_drvdata (pdev, NULL); + + pci_disable_device (pdev); + + DPRINTK ("EXIT\n"); +} + + +/* Serial EEPROM section. */ + +/* EEPROM_Ctrl bits. */ +#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */ +#define EE_CS 0x08 /* EEPROM chip select. */ +#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */ +#define EE_WRITE_0 0x00 +#define EE_WRITE_1 0x02 +#define EE_DATA_READ 0x01 /* EEPROM chip data out. */ +#define EE_ENB (0x80 | EE_CS) + +/* Delay between EEPROM clock transitions. + No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. + */ + +#define eeprom_delay() readl(ee_addr) + +/* The EEPROM commands include the alway-set leading bit. */ +#define EE_WRITE_CMD (5) +#define EE_READ_CMD (6) +#define EE_ERASE_CMD (7) + +static int __devinit read_eeprom (void *ioaddr, int location, int addr_len) +{ + int i; + unsigned retval = 0; + void *ee_addr = ioaddr + Cfg9346; + int read_cmd = location | (EE_READ_CMD << addr_len); + + DPRINTK ("ENTER\n"); + + writeb (EE_ENB & ~EE_CS, ee_addr); + writeb (EE_ENB, ee_addr); + eeprom_delay (); + + /* Shift the read command bits out. */ + for (i = 4 + addr_len; i >= 0; i--) { + int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + writeb (EE_ENB | dataval, ee_addr); + eeprom_delay (); + writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); + eeprom_delay (); + } + writeb (EE_ENB, ee_addr); + eeprom_delay (); + + for (i = 16; i > 0; i--) { + writeb (EE_ENB | EE_SHIFT_CLK, ee_addr); + eeprom_delay (); + retval = + (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 : + 0); + writeb (EE_ENB, ee_addr); + eeprom_delay (); + } + + /* Terminate the EEPROM access. */ + writeb (~EE_CS, ee_addr); + eeprom_delay (); + + DPRINTK ("EXIT - returning %d\n", retval); + return retval; +} + +/* MII serial management: mostly bogus for now. */ +/* Read and write the MII management registers using software-generated + serial MDIO protocol. + The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back PCI I/O cycles, but we insert a delay to avoid + "overclocking" issues. */ +#define MDIO_DIR 0x80 +#define MDIO_DATA_OUT 0x04 +#define MDIO_DATA_IN 0x02 +#define MDIO_CLK 0x01 +#define MDIO_WRITE0 (MDIO_DIR) +#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) + +#define mdio_delay() readb(mdio_addr) + + +static char mii_2_8139_map[8] = { + BasicModeCtrl, + BasicModeStatus, + 0, + 0, + NWayAdvert, + NWayLPAR, + NWayExpansion, + 0 +}; + + +/* Syncronize the MII management interface by shifting 32 one bits out. */ +static void mdio_sync (void *mdio_addr) +{ + int i; + + DPRINTK ("ENTER\n"); + + for (i = 32; i >= 0; i--) { + writeb (MDIO_WRITE1, mdio_addr); + mdio_delay (); + writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr); + mdio_delay (); + } + + DPRINTK ("EXIT\n"); +} + + +static int mdio_read (struct net_device *dev, int phy_id, int location) +{ + struct netdrv_private *tp = dev->priv; + void *mdio_addr = tp->mmio_addr + Config4; + int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; + int retval = 0; + int i; + + DPRINTK ("ENTER\n"); + + if (phy_id > 31) { /* Really a 8139. Use internal registers. */ + DPRINTK ("EXIT after directly using 8139 internal regs\n"); + return location < 8 && mii_2_8139_map[location] ? + readw (tp->mmio_addr + mii_2_8139_map[location]) : 0; + } + mdio_sync (mdio_addr); + /* Shift the read command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; + + writeb (MDIO_DIR | dataval, mdio_addr); + mdio_delay (); + writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr); + mdio_delay (); + } + + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + writeb (0, mdio_addr); + mdio_delay (); + retval = + (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1 + : 0); + writeb (MDIO_CLK, mdio_addr); + mdio_delay (); + } + + DPRINTK ("EXIT, returning %d\n", (retval >> 1) & 0xffff); + return (retval >> 1) & 0xffff; +} + + +static void mdio_write (struct net_device *dev, int phy_id, int location, + int value) +{ + struct netdrv_private *tp = dev->priv; + void *mdio_addr = tp->mmio_addr + Config4; + int mii_cmd = + (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; + int i; + + DPRINTK ("ENTER\n"); + + if (phy_id > 31) { /* Really a 8139. Use internal registers. */ + if (location < 8 && mii_2_8139_map[location]) { + writew (value, + tp->mmio_addr + mii_2_8139_map[location]); + readw (tp->mmio_addr + mii_2_8139_map[location]); + } + DPRINTK ("EXIT after directly using 8139 internal regs\n"); + return; + } + mdio_sync (mdio_addr); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = + (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + writeb (dataval, mdio_addr); + mdio_delay (); + writeb (dataval | MDIO_CLK, mdio_addr); + mdio_delay (); + } + + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + writeb (0, mdio_addr); + mdio_delay (); + writeb (MDIO_CLK, mdio_addr); + mdio_delay (); + } + + DPRINTK ("EXIT\n"); +} + + +static int netdrv_open (struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + int retval; +#ifdef NETDRV_DEBUG + void *ioaddr = tp->mmio_addr; +#endif + + DPRINTK ("ENTER\n"); + + retval = request_irq (dev->irq, netdrv_interrupt, SA_SHIRQ, dev->name, dev); + if (retval) { + DPRINTK ("EXIT, returning %d\n", retval); + return retval; + } + + tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN, + &tp->tx_bufs_dma); + tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN, + &tp->rx_ring_dma); + if (tp->tx_bufs == NULL || tp->rx_ring == NULL) { + free_irq(dev->irq, dev); + + if (tp->tx_bufs) + pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN, + tp->tx_bufs, tp->tx_bufs_dma); + if (tp->rx_ring) + pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN, + tp->rx_ring, tp->rx_ring_dma); + + DPRINTK ("EXIT, returning -ENOMEM\n"); + return -ENOMEM; + + } + + tp->full_duplex = tp->duplex_lock; + tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000; + + netdrv_init_ring (dev); + netdrv_hw_start (dev); + + DPRINTK ("%s: netdrv_open() ioaddr %#lx IRQ %d" + " GP Pins %2.2x %s-duplex.\n", + dev->name, pci_resource_start (tp->pci_dev, 1), + dev->irq, NETDRV_R8 (MediaStatus), + tp->full_duplex ? "full" : "half"); + + /* Set the timer to switch to check for link beat and perhaps switch + to an alternate media type. */ + init_timer (&tp->timer); + tp->timer.expires = jiffies + 3 * HZ; + tp->timer.data = (unsigned long) dev; + tp->timer.function = &netdrv_timer; + add_timer (&tp->timer); + + DPRINTK ("EXIT, returning 0\n"); + return 0; +} + + +/* Start the hardware at open or resume. */ +static void netdrv_hw_start (struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + u32 i; + + DPRINTK ("ENTER\n"); + + /* Soft reset the chip. */ + NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset); + udelay (100); + + /* Check that the chip has finished the reset. */ + for (i = 1000; i > 0; i--) + if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0) + break; + + /* Restore our idea of the MAC address. */ + NETDRV_W32_F (MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0))); + NETDRV_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4))); + + /* Must enable Tx/Rx before setting transfer thresholds! */ + NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | + CmdRxEnb | CmdTxEnb); + + i = netdrv_rx_config | + (NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); + NETDRV_W32_F (RxConfig, i); + + /* Check this value: the documentation for IFG contradicts ifself. */ + NETDRV_W32 (TxConfig, (TX_DMA_BURST << TxDMAShift)); + + /* unlock Config[01234] and BMCR register writes */ + NETDRV_W8_F (Cfg9346, Cfg9346_Unlock); + udelay (10); + + tp->cur_rx = 0; + + /* Lock Config[01234] and BMCR register writes */ + NETDRV_W8_F (Cfg9346, Cfg9346_Lock); + udelay (10); + + /* init Rx ring buffer DMA address */ + NETDRV_W32_F (RxBuf, tp->rx_ring_dma); + + /* init Tx buffer DMA addresses */ + for (i = 0; i < NUM_TX_DESC; i++) + NETDRV_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); + + NETDRV_W32_F (RxMissed, 0); + + netdrv_set_rx_mode (dev); + + /* no early-rx interrupts */ + NETDRV_W16 (MultiIntr, NETDRV_R16 (MultiIntr) & MultiIntrClear); + + /* make sure RxTx has started */ + NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | + CmdRxEnb | CmdTxEnb); + + /* Enable all known interrupts by setting the interrupt mask. */ + NETDRV_W16_F (IntrMask, netdrv_intr_mask); + + netif_start_queue (dev); + + DPRINTK ("EXIT\n"); +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void netdrv_init_ring (struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + int i; + + DPRINTK ("ENTER\n"); + + tp->cur_rx = 0; + atomic_set (&tp->cur_tx, 0); + atomic_set (&tp->dirty_tx, 0); + + for (i = 0; i < NUM_TX_DESC; i++) { + tp->tx_info[i].skb = NULL; + tp->tx_info[i].mapping = 0; + tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE]; + } + + DPRINTK ("EXIT\n"); +} + + +static void netdrv_timer (unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + int next_tick = 60 * HZ; + int mii_lpa; + + mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA); + + if (!tp->duplex_lock && mii_lpa != 0xffff) { + int duplex = (mii_lpa & LPA_100FULL) + || (mii_lpa & 0x01C0) == 0x0040; + if (tp->full_duplex != duplex) { + tp->full_duplex = duplex; + printk (KERN_INFO + "%s: Setting %s-duplex based on MII #%d link" + " partner ability of %4.4x.\n", dev->name, + tp->full_duplex ? "full" : "half", + tp->phys[0], mii_lpa); + NETDRV_W8 (Cfg9346, Cfg9346_Unlock); + NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20); + NETDRV_W8 (Cfg9346, Cfg9346_Lock); + } + } + + DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n", + dev->name, NETDRV_R16 (NWayLPAR)); + DPRINTK ("%s: Other registers are IntMask %4.4x IntStatus %4.4x" + " RxStatus %4.4x.\n", dev->name, + NETDRV_R16 (IntrMask), + NETDRV_R16 (IntrStatus), + NETDRV_R32 (RxEarlyStatus)); + DPRINTK ("%s: Chip config %2.2x %2.2x.\n", + dev->name, NETDRV_R8 (Config0), + NETDRV_R8 (Config1)); + + tp->timer.expires = jiffies + next_tick; + add_timer (&tp->timer); +} + + +static void netdrv_tx_clear (struct netdrv_private *tp) +{ + int i; + + atomic_set (&tp->cur_tx, 0); + atomic_set (&tp->dirty_tx, 0); + + /* Dump the unsent Tx packets. */ + for (i = 0; i < NUM_TX_DESC; i++) { + struct ring_info *rp = &tp->tx_info[i]; + if (rp->mapping != 0) { + pci_unmap_single (tp->pci_dev, rp->mapping, + rp->skb->len, PCI_DMA_TODEVICE); + rp->mapping = 0; + } + if (rp->skb) { + dev_kfree_skb (rp->skb); + rp->skb = NULL; + tp->stats.tx_dropped++; + } + } +} + + +static void netdrv_tx_timeout (struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + int i; + u8 tmp8; + unsigned long flags; + + DPRINTK ("%s: Transmit timeout, status %2.2x %4.4x " + "media %2.2x.\n", dev->name, + NETDRV_R8 (ChipCmd), + NETDRV_R16 (IntrStatus), + NETDRV_R8 (MediaStatus)); + + /* disable Tx ASAP, if not already */ + tmp8 = NETDRV_R8 (ChipCmd); + if (tmp8 & CmdTxEnb) + NETDRV_W8 (ChipCmd, tmp8 & ~CmdTxEnb); + + /* Disable interrupts by clearing the interrupt mask. */ + NETDRV_W16 (IntrMask, 0x0000); + + /* Emit info to figure out what went wrong. */ + printk (KERN_DEBUG "%s: Tx queue start entry %d dirty entry %d.\n", + dev->name, atomic_read (&tp->cur_tx), + atomic_read (&tp->dirty_tx)); + for (i = 0; i < NUM_TX_DESC; i++) + printk (KERN_DEBUG "%s: Tx descriptor %d is %8.8lx.%s\n", + dev->name, i, NETDRV_R32 (TxStatus0 + (i * 4)), + i == atomic_read (&tp->dirty_tx) % NUM_TX_DESC ? + " (queue head)" : ""); + + /* Stop a shared interrupt from scavenging while we are. */ + spin_lock_irqsave (&tp->lock, flags); + + netdrv_tx_clear (tp); + + spin_unlock_irqrestore (&tp->lock, flags); + + /* ...and finally, reset everything */ + netdrv_hw_start (dev); + + netif_wake_queue (dev); +} + + + +static int netdrv_start_xmit (struct sk_buff *skb, struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + int entry; + + /* Calculate the next Tx descriptor entry. */ + entry = atomic_read (&tp->cur_tx) % NUM_TX_DESC; + + assert (tp->tx_info[entry].skb == NULL); + assert (tp->tx_info[entry].mapping == 0); + + tp->tx_info[entry].skb = skb; + /* tp->tx_info[entry].mapping = 0; */ + memcpy (tp->tx_buf[entry], skb->data, skb->len); + + /* Note: the chip doesn't have auto-pad! */ + NETDRV_W32 (TxStatus0 + (entry * sizeof(u32)), + tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); + + dev->trans_start = jiffies; + atomic_inc (&tp->cur_tx); + if ((atomic_read (&tp->cur_tx) - atomic_read (&tp->dirty_tx)) >= NUM_TX_DESC) + netif_stop_queue (dev); + + DPRINTK ("%s: Queued Tx packet at %p size %u to slot %d.\n", + dev->name, skb->data, skb->len, entry); + + return 0; +} + + +static void netdrv_tx_interrupt (struct net_device *dev, + struct netdrv_private *tp, + void *ioaddr) +{ + int cur_tx, dirty_tx, tx_left; + + assert (dev != NULL); + assert (tp != NULL); + assert (ioaddr != NULL); + + dirty_tx = atomic_read (&tp->dirty_tx); + + cur_tx = atomic_read (&tp->cur_tx); + tx_left = cur_tx - dirty_tx; + while (tx_left > 0) { + int entry = dirty_tx % NUM_TX_DESC; + int txstatus; + + txstatus = NETDRV_R32 (TxStatus0 + (entry * sizeof (u32))); + + if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted))) + break; /* It still hasn't been Txed */ + + /* Note: TxCarrierLost is always asserted at 100mbps. */ + if (txstatus & (TxOutOfWindow | TxAborted)) { + /* There was an major error, log it. */ + DPRINTK ("%s: Transmit error, Tx status %8.8x.\n", + dev->name, txstatus); + tp->stats.tx_errors++; + if (txstatus & TxAborted) { + tp->stats.tx_aborted_errors++; + NETDRV_W32 (TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift)); + } + if (txstatus & TxCarrierLost) + tp->stats.tx_carrier_errors++; + if (txstatus & TxOutOfWindow) + tp->stats.tx_window_errors++; + } else { + if (txstatus & TxUnderrun) { + /* Add 64 to the Tx FIFO threshold. */ + if (tp->tx_flag < 0x00300000) + tp->tx_flag += 0x00020000; + tp->stats.tx_fifo_errors++; + } + tp->stats.collisions += (txstatus >> 24) & 15; + tp->stats.tx_bytes += txstatus & 0x7ff; + tp->stats.tx_packets++; + } + + /* Free the original skb. */ + if (tp->tx_info[entry].mapping != 0) { + pci_unmap_single(tp->pci_dev, + tp->tx_info[entry].mapping, + tp->tx_info[entry].skb->len, + PCI_DMA_TODEVICE); + tp->tx_info[entry].mapping = 0; + } + dev_kfree_skb_irq (tp->tx_info[entry].skb); + tp->tx_info[entry].skb = NULL; + dirty_tx++; + if (dirty_tx < 0) { /* handle signed int overflow */ + atomic_sub (cur_tx, &tp->cur_tx); /* XXX racy? */ + dirty_tx = cur_tx - tx_left + 1; + } + if (netif_queue_stopped (dev)) + netif_wake_queue (dev); + + cur_tx = atomic_read (&tp->cur_tx); + tx_left = cur_tx - dirty_tx; + + } + +#ifndef NETDRV_NDEBUG + if (atomic_read (&tp->cur_tx) - dirty_tx > NUM_TX_DESC) { + printk (KERN_ERR + "%s: Out-of-sync dirty pointer, %d vs. %d.\n", + dev->name, dirty_tx, atomic_read (&tp->cur_tx)); + dirty_tx += NUM_TX_DESC; + } +#endif /* NETDRV_NDEBUG */ + + atomic_set (&tp->dirty_tx, dirty_tx); +} + + +/* TODO: clean this up! Rx reset need not be this intensive */ +static void netdrv_rx_err (u32 rx_status, struct net_device *dev, + struct netdrv_private *tp, void *ioaddr) +{ + u8 tmp8; + int tmp_work = 1000; + + DPRINTK ("%s: Ethernet frame had errors, status %8.8x.\n", + dev->name, rx_status); + if (rx_status & RxTooLong) { + DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n", + dev->name, rx_status); + /* A.C.: The chip hangs here. */ + } + tp->stats.rx_errors++; + if (rx_status & (RxBadSymbol | RxBadAlign)) + tp->stats.rx_frame_errors++; + if (rx_status & (RxRunt | RxTooLong)) + tp->stats.rx_length_errors++; + if (rx_status & RxCRCErr) + tp->stats.rx_crc_errors++; + /* Reset the receiver, based on RealTek recommendation. (Bug?) */ + tp->cur_rx = 0; + + /* disable receive */ + tmp8 = NETDRV_R8 (ChipCmd) & ChipCmdClear; + NETDRV_W8_F (ChipCmd, tmp8 | CmdTxEnb); + + /* A.C.: Reset the multicast list. */ + netdrv_set_rx_mode (dev); + + /* XXX potentially temporary hack to + * restart hung receiver */ + while (--tmp_work > 0) { + tmp8 = NETDRV_R8 (ChipCmd); + if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb)) + break; + NETDRV_W8_F (ChipCmd, + (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb); + } + + /* G.S.: Re-enable receiver */ + /* XXX temporary hack to work around receiver hang */ + netdrv_set_rx_mode (dev); + + if (tmp_work <= 0) + printk (KERN_WARNING PFX "tx/rx enable wait too long\n"); +} + + +/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the + field alignments and semantics. */ +static void netdrv_rx_interrupt (struct net_device *dev, + struct netdrv_private *tp, void *ioaddr) +{ + unsigned char *rx_ring; + u16 cur_rx; + + assert (dev != NULL); + assert (tp != NULL); + assert (ioaddr != NULL); + + rx_ring = tp->rx_ring; + cur_rx = tp->cur_rx; + + DPRINTK ("%s: In netdrv_rx(), current %4.4x BufAddr %4.4x," + " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx, + NETDRV_R16 (RxBufAddr), + NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd)); + + while ((NETDRV_R8 (ChipCmd) & RxBufEmpty) == 0) { + int ring_offset = cur_rx % RX_BUF_LEN; + u32 rx_status; + unsigned int rx_size; + unsigned int pkt_size; + struct sk_buff *skb; + + /* read size+status of next frame from DMA ring buffer */ + rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset)); + rx_size = rx_status >> 16; + pkt_size = rx_size - 4; + + DPRINTK ("%s: netdrv_rx() status %4.4x, size %4.4x," + " cur %4.4x.\n", dev->name, rx_status, + rx_size, cur_rx); +#if NETDRV_DEBUG > 2 + { + int i; + DPRINTK ("%s: Frame contents ", dev->name); + for (i = 0; i < 70; i++) + printk (" %2.2x", + rx_ring[ring_offset + i]); + printk (".\n"); + } +#endif + + /* If Rx err or invalid rx_size/rx_status received + * (which happens if we get lost in the ring), + * Rx process gets reset, so we abort any further + * Rx processing. + */ + if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) || + (!(rx_status & RxStatusOK))) { + netdrv_rx_err (rx_status, dev, tp, ioaddr); + return; + } + + /* Malloc up new buffer, compatible with net-2e. */ + /* Omit the four octet CRC from the length. */ + + /* TODO: consider allocating skb's outside of + * interrupt context, both to speed interrupt processing, + * and also to reduce the chances of having to + * drop packets here under memory pressure. + */ + + skb = dev_alloc_skb (pkt_size + 2); + if (skb) { + skb->dev = dev; + skb_reserve (skb, 2); /* 16 byte align the IP fields. */ + + eth_copy_and_sum (skb, &rx_ring[ring_offset + 4], pkt_size, 0); + skb_put (skb, pkt_size); + + skb->protocol = eth_type_trans (skb, dev); + netif_rx (skb); + dev->last_rx = jiffies; + tp->stats.rx_bytes += pkt_size; + tp->stats.rx_packets++; + } else { + printk (KERN_WARNING + "%s: Memory squeeze, dropping packet.\n", + dev->name); + tp->stats.rx_dropped++; + } + + cur_rx = (cur_rx + rx_size + 4 + 3) & ~3; + NETDRV_W16_F (RxBufPtr, cur_rx - 16); + } + + DPRINTK ("%s: Done netdrv_rx(), current %4.4x BufAddr %4.4x," + " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx, + NETDRV_R16 (RxBufAddr), + NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd)); + + tp->cur_rx = cur_rx; +} + + +static void netdrv_weird_interrupt (struct net_device *dev, + struct netdrv_private *tp, + void *ioaddr, + int status, int link_changed) +{ + printk (KERN_DEBUG "%s: Abnormal interrupt, status %8.8x.\n", + dev->name, status); + + assert (dev != NULL); + assert (tp != NULL); + assert (ioaddr != NULL); + + /* Update the error count. */ + tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed); + NETDRV_W32 (RxMissed, 0); + + if ((status & RxUnderrun) && link_changed && + (tp->drv_flags & HAS_LNK_CHNG)) { + /* Really link-change on new chips. */ + int lpar = NETDRV_R16 (NWayLPAR); + int duplex = (lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 + || tp->duplex_lock; + if (tp->full_duplex != duplex) { + tp->full_duplex = duplex; + NETDRV_W8 (Cfg9346, Cfg9346_Unlock); + NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20); + NETDRV_W8 (Cfg9346, Cfg9346_Lock); + } + status &= ~RxUnderrun; + } + + /* XXX along with netdrv_rx_err, are we double-counting errors? */ + if (status & + (RxUnderrun | RxOverflow | RxErr | RxFIFOOver)) + tp->stats.rx_errors++; + + if (status & (PCSTimeout)) + tp->stats.rx_length_errors++; + if (status & (RxUnderrun | RxFIFOOver)) + tp->stats.rx_fifo_errors++; + if (status & RxOverflow) { + tp->stats.rx_over_errors++; + tp->cur_rx = NETDRV_R16 (RxBufAddr) % RX_BUF_LEN; + NETDRV_W16_F (RxBufPtr, tp->cur_rx - 16); + } + if (status & PCIErr) { + u16 pci_cmd_status; + pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status); + + printk (KERN_ERR "%s: PCI Bus error %4.4x.\n", + dev->name, pci_cmd_status); + } +} + + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static irqreturn_t netdrv_interrupt (int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_instance; + struct netdrv_private *tp = dev->priv; + int boguscnt = max_interrupt_work; + void *ioaddr = tp->mmio_addr; + int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */ + int handled = 0; + + spin_lock (&tp->lock); + + do { + status = NETDRV_R16 (IntrStatus); + + /* h/w no longer present (hotplug?) or major error, bail */ + if (status == 0xFFFF) + break; + + handled = 1; + /* Acknowledge all of the current interrupt sources ASAP */ + NETDRV_W16_F (IntrStatus, status); + + DPRINTK ("%s: interrupt status=%#4.4x new intstat=%#4.4x.\n", + dev->name, status, + NETDRV_R16 (IntrStatus)); + + if ((status & + (PCIErr | PCSTimeout | RxUnderrun | RxOverflow | + RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0) + break; + + /* Check uncommon events with one test. */ + if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow | + RxFIFOOver | TxErr | RxErr)) + netdrv_weird_interrupt (dev, tp, ioaddr, + status, link_changed); + + if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver)) /* Rx interrupt */ + netdrv_rx_interrupt (dev, tp, ioaddr); + + if (status & (TxOK | TxErr)) + netdrv_tx_interrupt (dev, tp, ioaddr); + + boguscnt--; + } while (boguscnt > 0); + + if (boguscnt <= 0) { + printk (KERN_WARNING + "%s: Too much work at interrupt, " + "IntrStatus=0x%4.4x.\n", dev->name, + status); + + /* Clear all interrupt sources. */ + NETDRV_W16 (IntrStatus, 0xffff); + } + + spin_unlock (&tp->lock); + + DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n", + dev->name, NETDRV_R16 (IntrStatus)); + return IRQ_RETVAL(handled); +} + + +static int netdrv_close (struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + unsigned long flags; + + DPRINTK ("ENTER\n"); + + netif_stop_queue (dev); + + DPRINTK ("%s: Shutting down ethercard, status was 0x%4.4x.\n", + dev->name, NETDRV_R16 (IntrStatus)); + + del_timer_sync (&tp->timer); + + spin_lock_irqsave (&tp->lock, flags); + + /* Stop the chip's Tx and Rx DMA processes. */ + NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear)); + + /* Disable interrupts by clearing the interrupt mask. */ + NETDRV_W16 (IntrMask, 0x0000); + + /* Update the error counts. */ + tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed); + NETDRV_W32 (RxMissed, 0); + + spin_unlock_irqrestore (&tp->lock, flags); + + synchronize_irq (); + free_irq (dev->irq, dev); + + netdrv_tx_clear (tp); + + pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN, + tp->rx_ring, tp->rx_ring_dma); + pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN, + tp->tx_bufs, tp->tx_bufs_dma); + tp->rx_ring = NULL; + tp->tx_bufs = NULL; + + /* Green! Put the chip in low-power mode. */ + NETDRV_W8 (Cfg9346, Cfg9346_Unlock); + NETDRV_W8 (Config1, 0x03); + NETDRV_W8 (Cfg9346, Cfg9346_Lock); + + DPRINTK ("EXIT\n"); + return 0; +} + + +static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct netdrv_private *tp = dev->priv; + struct mii_ioctl_data *data = if_mii(rq); + unsigned long flags; + int rc = 0; + + DPRINTK ("ENTER\n"); + + switch (cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = tp->phys[0] & 0x3f; + /* Fall Through */ + + case SIOCGMIIREG: /* Read MII PHY register. */ + spin_lock_irqsave (&tp->lock, flags); + data->val_out = mdio_read (dev, data->phy_id & 0x1f, data->reg_num & 0x1f); + spin_unlock_irqrestore (&tp->lock, flags); + break; + + case SIOCSMIIREG: /* Write MII PHY register. */ + if (!capable (CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + + spin_lock_irqsave (&tp->lock, flags); + mdio_write (dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); + spin_unlock_irqrestore (&tp->lock, flags); + break; + + default: + rc = -EOPNOTSUPP; + break; + } + + DPRINTK ("EXIT, returning %d\n", rc); + return rc; +} + + +static struct net_device_stats *netdrv_get_stats (struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + + DPRINTK ("ENTER\n"); + + assert (tp != NULL); + + if (netif_running(dev)) { + unsigned long flags; + + spin_lock_irqsave (&tp->lock, flags); + + tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed); + NETDRV_W32 (RxMissed, 0); + + spin_unlock_irqrestore (&tp->lock, flags); + } + + DPRINTK ("EXIT\n"); + return &tp->stats; +} + +/* Set or clear the multicast filter for this adaptor. + This routine is not state sensitive and need not be SMP locked. */ + +static void netdrv_set_rx_mode (struct net_device *dev) +{ + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + u32 mc_filter[2]; /* Multicast hash filter */ + int i, rx_mode; + u32 tmp; + + DPRINTK ("ENTER\n"); + + DPRINTK ("%s: netdrv_set_rx_mode(%4.4x) done -- Rx config %8.8x.\n", + dev->name, dev->flags, NETDRV_R32 (RxConfig)); + + /* Note: do not reorder, GCC is clever about common statements. */ + if (dev->flags & IFF_PROMISC) { + /* Unconditionally log net taps. */ + printk (KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + rx_mode = + AcceptBroadcast | AcceptMulticast | AcceptMyPhys | + AcceptAllPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else if ((dev->mc_count > multicast_filter_limit) + || (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else { + struct dev_mc_list *mclist; + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0; + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + } + + /* if called from irq handler, lock already acquired */ + if (!in_irq ()) + spin_lock_irq (&tp->lock); + + /* We can safely update without stopping the chip. */ + tmp = netdrv_rx_config | rx_mode | + (NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); + NETDRV_W32_F (RxConfig, tmp); + NETDRV_W32_F (MAR0 + 0, mc_filter[0]); + NETDRV_W32_F (MAR0 + 4, mc_filter[1]); + + if (!in_irq ()) + spin_unlock_irq (&tp->lock); + + DPRINTK ("EXIT\n"); +} + + +#ifdef CONFIG_PM + +static int netdrv_suspend (struct pci_dev *pdev, u32 state) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdrv_private *tp = dev->priv; + void *ioaddr = tp->mmio_addr; + unsigned long flags; + + if (!netif_running(dev)) + return 0; + netif_device_detach (dev); + + spin_lock_irqsave (&tp->lock, flags); + + /* Disable interrupts, stop Tx and Rx. */ + NETDRV_W16 (IntrMask, 0x0000); + NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear)); + + /* Update the error counts. */ + tp->stats.rx_missed_errors += NETDRV_R32 (RxMissed); + NETDRV_W32 (RxMissed, 0); + + spin_unlock_irqrestore (&tp->lock, flags); + + pci_save_state (pdev); + pci_set_power_state (pdev, PCI_D3hot); + + return 0; +} + + +static int netdrv_resume (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdrv_private *tp = dev->priv; + + if (!netif_running(dev)) + return 0; + pci_set_power_state (pdev, PCI_D0); + pci_restore_state (pdev); + netif_device_attach (dev); + netdrv_hw_start (dev); + + return 0; +} + +#endif /* CONFIG_PM */ + + +static struct pci_driver netdrv_pci_driver = { + .name = MODNAME, + .id_table = netdrv_pci_tbl, + .probe = netdrv_init_one, + .remove = __devexit_p(netdrv_remove_one), +#ifdef CONFIG_PM + .suspend = netdrv_suspend, + .resume = netdrv_resume, +#endif /* CONFIG_PM */ +}; + + +static int __init netdrv_init_module (void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + printk(version); +#endif + return pci_module_init (&netdrv_pci_driver); +} + + +static void __exit netdrv_cleanup_module (void) +{ + pci_unregister_driver (&netdrv_pci_driver); +} + + +module_init(netdrv_init_module); +module_exit(netdrv_cleanup_module); |