diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/smc91x.h | |
download | linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/smc91x.h')
-rw-r--r-- | drivers/net/smc91x.h | 1032 |
1 files changed, 1032 insertions, 0 deletions
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h new file mode 100644 index 000000000000..ddd2688e7d33 --- /dev/null +++ b/drivers/net/smc91x.h @@ -0,0 +1,1032 @@ +/*------------------------------------------------------------------------ + . smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device. + . + . Copyright (C) 1996 by Erik Stahlman + . Copyright (C) 2001 Standard Microsystems Corporation + . Developed by Simple Network Magic Corporation + . Copyright (C) 2003 Monta Vista Software, Inc. + . Unified SMC91x driver by Nicolas Pitre + . + . This program is free software; you can redistribute it and/or modify + . it under the terms of the GNU General Public License as published by + . the Free Software Foundation; either version 2 of the License, or + . (at your option) any later version. + . + . This program is distributed in the hope that it will be useful, + . but WITHOUT ANY WARRANTY; without even the implied warranty of + . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + . GNU General Public License for more details. + . + . You should have received a copy of the GNU General Public License + . along with this program; if not, write to the Free Software + . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + . + . Information contained in this file was obtained from the LAN91C111 + . manual from SMC. To get a copy, if you really want one, you can find + . information under www.smsc.com. + . + . Authors + . Erik Stahlman <erik@vt.edu> + . Daris A Nevil <dnevil@snmc.com> + . Nicolas Pitre <nico@cam.org> + . + ---------------------------------------------------------------------------*/ +#ifndef _SMC91X_H_ +#define _SMC91X_H_ + + +/* + * Define your architecture specific bus configuration parameters here. + */ + +#if defined(CONFIG_ARCH_LUBBOCK) + +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 1 + +/* The first two address lines aren't connected... */ +#define SMC_IO_SHIFT 2 + +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) + +#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6) + +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 1 + +#define SMC_IO_SHIFT 0 + +#define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r))) +#define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v) +#define SMC_insw(a, r, p, l) \ + do { \ + unsigned long __port = (a) + (r); \ + u16 *__p = (u16 *)(p); \ + int __l = (l); \ + insw(__port, __p, __l); \ + while (__l > 0) { \ + *__p = swab16(*__p); \ + __p++; \ + __l--; \ + } \ + } while (0) +#define SMC_outsw(a, r, p, l) \ + do { \ + unsigned long __port = (a) + (r); \ + u16 *__p = (u16 *)(p); \ + int __l = (l); \ + while (__l > 0) { \ + /* Believe it or not, the swab isn't needed. */ \ + outw( /* swab16 */ (*__p++), __port); \ + __l--; \ + } \ + } while (0) +#define set_irq_type(irq, type) + +#elif defined(CONFIG_SA1100_PLEB) +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) inb((a) + (r)) +#define SMC_insb(a, r, p, l) insb((a) + (r), p, (l)) +#define SMC_inw(a, r) inw((a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outb(v, a, r) outb(v, (a) + (r)) +#define SMC_outsb(a, r, p, l) outsb((a) + (r), p, (l)) +#define SMC_outw(v, a, r) outw(v, (a) + (r)) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) + +#define set_irq_type(irq, type) do {} while (0) + +#elif defined(CONFIG_SA1100_ASSABET) + +#include <asm/arch/neponset.h> + +/* We can only do 8-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 0 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 1 + +/* The first two address lines aren't connected... */ +#define SMC_IO_SHIFT 2 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) +#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) + +#elif defined(CONFIG_ARCH_INNOKOM) || \ + defined(CONFIG_MACH_MAINSTONE) || \ + defined(CONFIG_ARCH_PXA_IDP) || \ + defined(CONFIG_ARCH_RAMSES) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 +#define SMC_USE_PXA_DMA 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +/* We actually can't write halfwords properly if not word aligned */ +static inline void +SMC_outw(u16 val, unsigned long ioaddr, int reg) +{ + if (reg & 2) { + unsigned int v = val << 16; + v |= readl(ioaddr + (reg & ~2)) & 0xffff; + writel(v, ioaddr + (reg & ~2)); + } else { + writew(val, ioaddr + reg); + } +} + +#elif defined(CONFIG_ARCH_OMAP) + +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#elif defined(CONFIG_SH_SH4202_MICRODEV) + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 + +#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000) +#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000) +#define SMC_inl(a, r) inl((a) + (r) - 0xa0000000) +#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000) +#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000) +#define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000) +#define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l) +#define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l) +#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l) + +#define set_irq_type(irq, type) do {} while(0) + +#elif defined(CONFIG_ISA) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 + +#define SMC_inb(a, r) inb((a) + (r)) +#define SMC_inw(a, r) inw((a) + (r)) +#define SMC_outb(v, a, r) outb(v, (a) + (r)) +#define SMC_outw(v, a, r) outw(v, (a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) + +#elif defined(CONFIG_M32R) + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 + +#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000) +#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000) +#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000) +#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000) +#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l) + +#define set_irq_type(irq, type) do {} while(0) + +#define RPC_LSA_DEFAULT RPC_LED_TX_RX +#define RPC_LSB_DEFAULT RPC_LED_100_10 + +#elif defined(CONFIG_MACH_LPD7A400) || defined(CONFIG_MACH_LPD7A404) + +/* The LPD7A40X_IOBARRIER is necessary to overcome a mismatch between + * the way that the CPU handles chip selects and the way that the SMC + * chip expects the chip select to operate. Refer to + * Documentation/arm/Sharp-LH/IOBarrier for details. The read from + * IOBARRIER is a byte as a least-common denominator of possible + * regions to use as the barrier. It would be wasteful to read 32 + * bits from a byte oriented region. + * + * There is no explicit protection against interrupts intervening + * between the writew and the IOBARRIER. In SMC ISR there is a + * preamble that performs an IOBARRIER in the extremely unlikely event + * that the driver interrupts itself between a writew to the chip an + * the IOBARRIER that follows *and* the cache is large enough that the + * first off-chip access while handing the interrupt is to the SMC + * chip. Other devices in the same address space as the SMC chip must + * be aware of the potential for trouble and perform a similar + * IOBARRIER on entry to their ISR. + */ + +#include <asm/arch/constants.h> /* IOBARRIER_VIRT */ + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 0 +#define LPD7A40X_IOBARRIER readb (IOBARRIER_VIRT) + +#define SMC_inw(a,r) readw ((void*) ((a) + (r))) +#define SMC_insw(a,r,p,l) readsw ((void*) ((a) + (r)), p, l) +#define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7A40X_IOBARRIER; }) + +static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) +{ + unsigned short* ps = (unsigned short*) p; + while (l-- > 0) { + writew (*ps++, a + r); + LPD7A40X_IOBARRIER; + } +} + +#define SMC_INTERRUPT_PREAMBLE LPD7A40X_IOBARRIER + +#define RPC_LSA_DEFAULT RPC_LED_TX_RX +#define RPC_LSB_DEFAULT RPC_LED_100_10 + +#else + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#define RPC_LSA_DEFAULT RPC_LED_100_10 +#define RPC_LSB_DEFAULT RPC_LED_TX_RX + +#endif + + +#ifdef SMC_USE_PXA_DMA +/* + * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is + * always happening in irq context so no need to worry about races. TX is + * different and probably not worth it for that reason, and not as critical + * as RX which can overrun memory and lose packets. + */ +#include <linux/dma-mapping.h> +#include <asm/dma.h> +#include <asm/arch/pxa-regs.h> + +#ifdef SMC_insl +#undef SMC_insl +#define SMC_insl(a, r, p, l) \ + smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) +static inline void +smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, + u_char *buf, int len) +{ + dma_addr_t dmabuf; + + /* fallback if no DMA available */ + if (dma == (unsigned char)-1) { + readsl(ioaddr + reg, buf, len); + return; + } + + /* 64 bit alignment is required for memory to memory DMA */ + if ((long)buf & 4) { + *((u32 *)buf) = SMC_inl(ioaddr, reg); + buf += 4; + len--; + } + + len *= 4; + dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); + DCSR(dma) = DCSR_NODESC; + DTADR(dma) = dmabuf; + DSADR(dma) = physaddr + reg; + DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | + DCMD_WIDTH4 | (DCMD_LENGTH & len)); + DCSR(dma) = DCSR_NODESC | DCSR_RUN; + while (!(DCSR(dma) & DCSR_STOPSTATE)) + cpu_relax(); + DCSR(dma) = 0; + dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); +} +#endif + +#ifdef SMC_insw +#undef SMC_insw +#define SMC_insw(a, r, p, l) \ + smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) +static inline void +smc_pxa_dma_insw(u_long ioaddr, u_long physaddr, int reg, int dma, + u_char *buf, int len) +{ + dma_addr_t dmabuf; + + /* fallback if no DMA available */ + if (dma == (unsigned char)-1) { + readsw(ioaddr + reg, buf, len); + return; + } + + /* 64 bit alignment is required for memory to memory DMA */ + while ((long)buf & 6) { + *((u16 *)buf) = SMC_inw(ioaddr, reg); + buf += 2; + len--; + } + + len *= 2; + dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); + DCSR(dma) = DCSR_NODESC; + DTADR(dma) = dmabuf; + DSADR(dma) = physaddr + reg; + DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | + DCMD_WIDTH2 | (DCMD_LENGTH & len)); + DCSR(dma) = DCSR_NODESC | DCSR_RUN; + while (!(DCSR(dma) & DCSR_STOPSTATE)) + cpu_relax(); + DCSR(dma) = 0; + dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); +} +#endif + +static void +smc_pxa_dma_irq(int dma, void *dummy, struct pt_regs *regs) +{ + DCSR(dma) = 0; +} +#endif /* SMC_USE_PXA_DMA */ + + +/* Because of bank switching, the LAN91x uses only 16 I/O ports */ +#ifndef SMC_IO_SHIFT +#define SMC_IO_SHIFT 0 +#endif +#define SMC_IO_EXTENT (16 << SMC_IO_SHIFT) +#define SMC_DATA_EXTENT (4) + +/* + . Bank Select Register: + . + . yyyy yyyy 0000 00xx + . xx = bank number + . yyyy yyyy = 0x33, for identification purposes. +*/ +#define BANK_SELECT (14 << SMC_IO_SHIFT) + + +// Transmit Control Register +/* BANK 0 */ +#define TCR_REG SMC_REG(0x0000, 0) +#define TCR_ENABLE 0x0001 // When 1 we can transmit +#define TCR_LOOP 0x0002 // Controls output pin LBK +#define TCR_FORCOL 0x0004 // When 1 will force a collision +#define TCR_PAD_EN 0x0080 // When 1 will pad tx frames < 64 bytes w/0 +#define TCR_NOCRC 0x0100 // When 1 will not append CRC to tx frames +#define TCR_MON_CSN 0x0400 // When 1 tx monitors carrier +#define TCR_FDUPLX 0x0800 // When 1 enables full duplex operation +#define TCR_STP_SQET 0x1000 // When 1 stops tx if Signal Quality Error +#define TCR_EPH_LOOP 0x2000 // When 1 enables EPH block loopback +#define TCR_SWFDUP 0x8000 // When 1 enables Switched Full Duplex mode + +#define TCR_CLEAR 0 /* do NOTHING */ +/* the default settings for the TCR register : */ +#define TCR_DEFAULT (TCR_ENABLE | TCR_PAD_EN) + + +// EPH Status Register +/* BANK 0 */ +#define EPH_STATUS_REG SMC_REG(0x0002, 0) +#define ES_TX_SUC 0x0001 // Last TX was successful +#define ES_SNGL_COL 0x0002 // Single collision detected for last tx +#define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx +#define ES_LTX_MULT 0x0008 // Last tx was a multicast +#define ES_16COL 0x0010 // 16 Collisions Reached +#define ES_SQET 0x0020 // Signal Quality Error Test +#define ES_LTXBRD 0x0040 // Last tx was a broadcast +#define ES_TXDEFR 0x0080 // Transmit Deferred +#define ES_LATCOL 0x0200 // Late collision detected on last tx +#define ES_LOSTCARR 0x0400 // Lost Carrier Sense +#define ES_EXC_DEF 0x0800 // Excessive Deferral +#define ES_CTR_ROL 0x1000 // Counter Roll Over indication +#define ES_LINK_OK 0x4000 // Driven by inverted value of nLNK pin +#define ES_TXUNRN 0x8000 // Tx Underrun + + +// Receive Control Register +/* BANK 0 */ +#define RCR_REG SMC_REG(0x0004, 0) +#define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted +#define RCR_PRMS 0x0002 // Enable promiscuous mode +#define RCR_ALMUL 0x0004 // When set accepts all multicast frames +#define RCR_RXEN 0x0100 // IFF this is set, we can receive packets +#define RCR_STRIP_CRC 0x0200 // When set strips CRC from rx packets +#define RCR_ABORT_ENB 0x0200 // When set will abort rx on collision +#define RCR_FILT_CAR 0x0400 // When set filters leading 12 bit s of carrier +#define RCR_SOFTRST 0x8000 // resets the chip + +/* the normal settings for the RCR register : */ +#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN) +#define RCR_CLEAR 0x0 // set it to a base state + + +// Counter Register +/* BANK 0 */ +#define COUNTER_REG SMC_REG(0x0006, 0) + + +// Memory Information Register +/* BANK 0 */ +#define MIR_REG SMC_REG(0x0008, 0) + + +// Receive/Phy Control Register +/* BANK 0 */ +#define RPC_REG SMC_REG(0x000A, 0) +#define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode. +#define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode +#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode +#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb +#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb +#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect +#define RPC_LED_RES (0x01) // LED = Reserved +#define RPC_LED_10 (0x02) // LED = 10Mbps link detect +#define RPC_LED_FD (0x03) // LED = Full Duplex Mode +#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred +#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect +#define RPC_LED_TX (0x06) // LED = TX packet occurred +#define RPC_LED_RX (0x07) // LED = RX packet occurred + +#ifndef RPC_LSA_DEFAULT +#define RPC_LSA_DEFAULT RPC_LED_100 +#endif +#ifndef RPC_LSB_DEFAULT +#define RPC_LSB_DEFAULT RPC_LED_FD +#endif + +#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) + + +/* Bank 0 0x0C is reserved */ + +// Bank Select Register +/* All Banks */ +#define BSR_REG 0x000E + + +// Configuration Reg +/* BANK 1 */ +#define CONFIG_REG SMC_REG(0x0000, 1) +#define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy +#define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL +#define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus +#define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode. + +// Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low +#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN) + + +// Base Address Register +/* BANK 1 */ +#define BASE_REG SMC_REG(0x0002, 1) + + +// Individual Address Registers +/* BANK 1 */ +#define ADDR0_REG SMC_REG(0x0004, 1) +#define ADDR1_REG SMC_REG(0x0006, 1) +#define ADDR2_REG SMC_REG(0x0008, 1) + + +// General Purpose Register +/* BANK 1 */ +#define GP_REG SMC_REG(0x000A, 1) + + +// Control Register +/* BANK 1 */ +#define CTL_REG SMC_REG(0x000C, 1) +#define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received +#define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically +#define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt +#define CTL_CR_ENABLE 0x0040 // When 1 enables Counter Rollover interrupt +#define CTL_TE_ENABLE 0x0020 // When 1 enables Transmit Error interrupt +#define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store +#define CTL_RELOAD 0x0002 // When set reads EEPROM into registers +#define CTL_STORE 0x0001 // When set stores registers into EEPROM + + +// MMU Command Register +/* BANK 2 */ +#define MMU_CMD_REG SMC_REG(0x0000, 2) +#define MC_BUSY 1 // When 1 the last release has not completed +#define MC_NOP (0<<5) // No Op +#define MC_ALLOC (1<<5) // OR with number of 256 byte packets +#define MC_RESET (2<<5) // Reset MMU to initial state +#define MC_REMOVE (3<<5) // Remove the current rx packet +#define MC_RELEASE (4<<5) // Remove and release the current rx packet +#define MC_FREEPKT (5<<5) // Release packet in PNR register +#define MC_ENQUEUE (6<<5) // Enqueue the packet for transmit +#define MC_RSTTXFIFO (7<<5) // Reset the TX FIFOs + + +// Packet Number Register +/* BANK 2 */ +#define PN_REG SMC_REG(0x0002, 2) + + +// Allocation Result Register +/* BANK 2 */ +#define AR_REG SMC_REG(0x0003, 2) +#define AR_FAILED 0x80 // Alocation Failed + + +// TX FIFO Ports Register +/* BANK 2 */ +#define TXFIFO_REG SMC_REG(0x0004, 2) +#define TXFIFO_TEMPTY 0x80 // TX FIFO Empty + +// RX FIFO Ports Register +/* BANK 2 */ +#define RXFIFO_REG SMC_REG(0x0005, 2) +#define RXFIFO_REMPTY 0x80 // RX FIFO Empty + +#define FIFO_REG SMC_REG(0x0004, 2) + +// Pointer Register +/* BANK 2 */ +#define PTR_REG SMC_REG(0x0006, 2) +#define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area +#define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access +#define PTR_READ 0x2000 // When 1 the operation is a read + + +// Data Register +/* BANK 2 */ +#define DATA_REG SMC_REG(0x0008, 2) + + +// Interrupt Status/Acknowledge Register +/* BANK 2 */ +#define INT_REG SMC_REG(0x000C, 2) + + +// Interrupt Mask Register +/* BANK 2 */ +#define IM_REG SMC_REG(0x000D, 2) +#define IM_MDINT 0x80 // PHY MI Register 18 Interrupt +#define IM_ERCV_INT 0x40 // Early Receive Interrupt +#define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section +#define IM_RX_OVRN_INT 0x10 // Set by Receiver Overruns +#define IM_ALLOC_INT 0x08 // Set when allocation request is completed +#define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty +#define IM_TX_INT 0x02 // Transmit Interrupt +#define IM_RCV_INT 0x01 // Receive Interrupt + + +// Multicast Table Registers +/* BANK 3 */ +#define MCAST_REG1 SMC_REG(0x0000, 3) +#define MCAST_REG2 SMC_REG(0x0002, 3) +#define MCAST_REG3 SMC_REG(0x0004, 3) +#define MCAST_REG4 SMC_REG(0x0006, 3) + + +// Management Interface Register (MII) +/* BANK 3 */ +#define MII_REG SMC_REG(0x0008, 3) +#define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup +#define MII_MDOE 0x0008 // MII Output Enable +#define MII_MCLK 0x0004 // MII Clock, pin MDCLK +#define MII_MDI 0x0002 // MII Input, pin MDI +#define MII_MDO 0x0001 // MII Output, pin MDO + + +// Revision Register +/* BANK 3 */ +/* ( hi: chip id low: rev # ) */ +#define REV_REG SMC_REG(0x000A, 3) + + +// Early RCV Register +/* BANK 3 */ +/* this is NOT on SMC9192 */ +#define ERCV_REG SMC_REG(0x000C, 3) +#define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received +#define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask + + +// External Register +/* BANK 7 */ +#define EXT_REG SMC_REG(0x0000, 7) + + +#define CHIP_9192 3 +#define CHIP_9194 4 +#define CHIP_9195 5 +#define CHIP_9196 6 +#define CHIP_91100 7 +#define CHIP_91100FD 8 +#define CHIP_91111FD 9 + +static const char * chip_ids[ 16 ] = { + NULL, NULL, NULL, + /* 3 */ "SMC91C90/91C92", + /* 4 */ "SMC91C94", + /* 5 */ "SMC91C95", + /* 6 */ "SMC91C96", + /* 7 */ "SMC91C100", + /* 8 */ "SMC91C100FD", + /* 9 */ "SMC91C11xFD", + NULL, NULL, NULL, + NULL, NULL, NULL}; + + +/* + . Transmit status bits +*/ +#define TS_SUCCESS 0x0001 +#define TS_LOSTCAR 0x0400 +#define TS_LATCOL 0x0200 +#define TS_16COL 0x0010 + +/* + . Receive status bits +*/ +#define RS_ALGNERR 0x8000 +#define RS_BRODCAST 0x4000 +#define RS_BADCRC 0x2000 +#define RS_ODDFRAME 0x1000 +#define RS_TOOLONG 0x0800 +#define RS_TOOSHORT 0x0400 +#define RS_MULTICAST 0x0001 +#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) + + +/* + * PHY IDs + * LAN83C183 == LAN91C111 Internal PHY + */ +#define PHY_LAN83C183 0x0016f840 +#define PHY_LAN83C180 0x02821c50 + +/* + * PHY Register Addresses (LAN91C111 Internal PHY) + * + * Generic PHY registers can be found in <linux/mii.h> + * + * These phy registers are specific to our on-board phy. + */ + +// PHY Configuration Register 1 +#define PHY_CFG1_REG 0x10 +#define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled +#define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled +#define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down +#define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler +#define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable +#define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled +#define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm) +#define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db +#define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust +#define PHY_CFG1_TLVL_MASK 0x003C +#define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time + + +// PHY Configuration Register 2 +#define PHY_CFG2_REG 0x11 +#define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled +#define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled +#define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt) +#define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo + +// PHY Status Output (and Interrupt status) Register +#define PHY_INT_REG 0x12 // Status Output (Interrupt Status) +#define PHY_INT_INT 0x8000 // 1=bits have changed since last read +#define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected +#define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync +#define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx +#define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx +#define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx +#define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected +#define PHY_INT_JAB 0x0100 // 1=Jabber detected +#define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode +#define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex + +// PHY Interrupt/Status Mask Register +#define PHY_MASK_REG 0x13 // Interrupt Mask +// Uses the same bit definitions as PHY_INT_REG + + +/* + * SMC91C96 ethernet config and status registers. + * These are in the "attribute" space. + */ +#define ECOR 0x8000 +#define ECOR_RESET 0x80 +#define ECOR_LEVEL_IRQ 0x40 +#define ECOR_WR_ATTRIB 0x04 +#define ECOR_ENABLE 0x01 + +#define ECSR 0x8002 +#define ECSR_IOIS8 0x20 +#define ECSR_PWRDWN 0x04 +#define ECSR_INT 0x02 + +#define ATTRIB_SIZE ((64*1024) << SMC_IO_SHIFT) + + +/* + * Macros to abstract register access according to the data bus + * capabilities. Please use those and not the in/out primitives. + * Note: the following macros do *not* select the bank -- this must + * be done separately as needed in the main code. The SMC_REG() macro + * only uses the bank argument for debugging purposes (when enabled). + */ + +#if SMC_DEBUG > 0 +#define SMC_REG(reg, bank) \ + ({ \ + int __b = SMC_CURRENT_BANK(); \ + if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \ + printk( "%s: bank reg screwed (0x%04x)\n", \ + CARDNAME, __b ); \ + BUG(); \ + } \ + reg<<SMC_IO_SHIFT; \ + }) +#else +#define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT) +#endif + +#if SMC_CAN_USE_8BIT +#define SMC_GET_PN() SMC_inb( ioaddr, PN_REG ) +#define SMC_SET_PN(x) SMC_outb( x, ioaddr, PN_REG ) +#define SMC_GET_AR() SMC_inb( ioaddr, AR_REG ) +#define SMC_GET_TXFIFO() SMC_inb( ioaddr, TXFIFO_REG ) +#define SMC_GET_RXFIFO() SMC_inb( ioaddr, RXFIFO_REG ) +#define SMC_GET_INT() SMC_inb( ioaddr, INT_REG ) +#define SMC_ACK_INT(x) SMC_outb( x, ioaddr, INT_REG ) +#define SMC_GET_INT_MASK() SMC_inb( ioaddr, IM_REG ) +#define SMC_SET_INT_MASK(x) SMC_outb( x, ioaddr, IM_REG ) +#else +#define SMC_GET_PN() (SMC_inw( ioaddr, PN_REG ) & 0xFF) +#define SMC_SET_PN(x) SMC_outw( x, ioaddr, PN_REG ) +#define SMC_GET_AR() (SMC_inw( ioaddr, PN_REG ) >> 8) +#define SMC_GET_TXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) & 0xFF) +#define SMC_GET_RXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) >> 8) +#define SMC_GET_INT() (SMC_inw( ioaddr, INT_REG ) & 0xFF) +#define SMC_ACK_INT(x) \ + do { \ + unsigned long __flags; \ + int __mask; \ + local_irq_save(__flags); \ + __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \ + SMC_outw( __mask | (x), ioaddr, INT_REG ); \ + local_irq_restore(__flags); \ + } while (0) +#define SMC_GET_INT_MASK() (SMC_inw( ioaddr, INT_REG ) >> 8) +#define SMC_SET_INT_MASK(x) SMC_outw( (x) << 8, ioaddr, INT_REG ) +#endif + +#define SMC_CURRENT_BANK() SMC_inw( ioaddr, BANK_SELECT ) +#define SMC_SELECT_BANK(x) SMC_outw( x, ioaddr, BANK_SELECT ) +#define SMC_GET_BASE() SMC_inw( ioaddr, BASE_REG ) +#define SMC_SET_BASE(x) SMC_outw( x, ioaddr, BASE_REG ) +#define SMC_GET_CONFIG() SMC_inw( ioaddr, CONFIG_REG ) +#define SMC_SET_CONFIG(x) SMC_outw( x, ioaddr, CONFIG_REG ) +#define SMC_GET_COUNTER() SMC_inw( ioaddr, COUNTER_REG ) +#define SMC_GET_CTL() SMC_inw( ioaddr, CTL_REG ) +#define SMC_SET_CTL(x) SMC_outw( x, ioaddr, CTL_REG ) +#define SMC_GET_MII() SMC_inw( ioaddr, MII_REG ) +#define SMC_SET_MII(x) SMC_outw( x, ioaddr, MII_REG ) +#define SMC_GET_MIR() SMC_inw( ioaddr, MIR_REG ) +#define SMC_SET_MIR(x) SMC_outw( x, ioaddr, MIR_REG ) +#define SMC_GET_MMU_CMD() SMC_inw( ioaddr, MMU_CMD_REG ) +#define SMC_SET_MMU_CMD(x) SMC_outw( x, ioaddr, MMU_CMD_REG ) +#define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG ) +#define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG ) +#define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG ) +#define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG ) +#define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG ) +#define SMC_GET_REV() SMC_inw( ioaddr, REV_REG ) +#define SMC_GET_RPC() SMC_inw( ioaddr, RPC_REG ) +#define SMC_SET_RPC(x) SMC_outw( x, ioaddr, RPC_REG ) +#define SMC_GET_TCR() SMC_inw( ioaddr, TCR_REG ) +#define SMC_SET_TCR(x) SMC_outw( x, ioaddr, TCR_REG ) + +#ifndef SMC_GET_MAC_ADDR +#define SMC_GET_MAC_ADDR(addr) \ + do { \ + unsigned int __v; \ + __v = SMC_inw( ioaddr, ADDR0_REG ); \ + addr[0] = __v; addr[1] = __v >> 8; \ + __v = SMC_inw( ioaddr, ADDR1_REG ); \ + addr[2] = __v; addr[3] = __v >> 8; \ + __v = SMC_inw( ioaddr, ADDR2_REG ); \ + addr[4] = __v; addr[5] = __v >> 8; \ + } while (0) +#endif + +#define SMC_SET_MAC_ADDR(addr) \ + do { \ + SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \ + SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \ + SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \ + } while (0) + +#define SMC_SET_MCAST(x) \ + do { \ + const unsigned char *mt = (x); \ + SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \ + SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \ + SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \ + SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \ + } while (0) + +#if SMC_CAN_USE_32BIT +/* + * Some setups just can't write 8 or 16 bits reliably when not aligned + * to a 32 bit boundary. I tell you that exists! + * We re-do the ones here that can be easily worked around if they can have + * their low parts written to 0 without adverse effects. + */ +#undef SMC_SELECT_BANK +#define SMC_SELECT_BANK(x) SMC_outl( (x)<<16, ioaddr, 12<<SMC_IO_SHIFT ) +#undef SMC_SET_RPC +#define SMC_SET_RPC(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(8, 0) ) +#undef SMC_SET_PN +#define SMC_SET_PN(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(0, 2) ) +#undef SMC_SET_PTR +#define SMC_SET_PTR(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(4, 2) ) +#endif + +#if SMC_CAN_USE_32BIT +#define SMC_PUT_PKT_HDR(status, length) \ + SMC_outl( (status) | (length) << 16, ioaddr, DATA_REG ) +#define SMC_GET_PKT_HDR(status, length) \ + do { \ + unsigned int __val = SMC_inl( ioaddr, DATA_REG ); \ + (status) = __val & 0xffff; \ + (length) = __val >> 16; \ + } while (0) +#else +#define SMC_PUT_PKT_HDR(status, length) \ + do { \ + SMC_outw( status, ioaddr, DATA_REG ); \ + SMC_outw( length, ioaddr, DATA_REG ); \ + } while (0) +#define SMC_GET_PKT_HDR(status, length) \ + do { \ + (status) = SMC_inw( ioaddr, DATA_REG ); \ + (length) = SMC_inw( ioaddr, DATA_REG ); \ + } while (0) +#endif + +#if SMC_CAN_USE_32BIT +#define _SMC_PUSH_DATA(p, l) \ + do { \ + char *__ptr = (p); \ + int __len = (l); \ + if (__len >= 2 && (unsigned long)__ptr & 2) { \ + __len -= 2; \ + SMC_outw( *(u16 *)__ptr, ioaddr, DATA_REG ); \ + __ptr += 2; \ + } \ + SMC_outsl( ioaddr, DATA_REG, __ptr, __len >> 2); \ + if (__len & 2) { \ + __ptr += (__len & ~3); \ + SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \ + } \ + } while (0) +#define _SMC_PULL_DATA(p, l) \ + do { \ + char *__ptr = (p); \ + int __len = (l); \ + if ((unsigned long)__ptr & 2) { \ + /* \ + * We want 32bit alignment here. \ + * Since some buses perform a full 32bit \ + * fetch even for 16bit data we can't use \ + * SMC_inw() here. Back both source (on chip \ + * and destination) pointers of 2 bytes. \ + */ \ + __ptr -= 2; \ + __len += 2; \ + SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \ + } \ + __len += 2; \ + SMC_insl( ioaddr, DATA_REG, __ptr, __len >> 2); \ + } while (0) +#elif SMC_CAN_USE_16BIT +#define _SMC_PUSH_DATA(p, l) SMC_outsw( ioaddr, DATA_REG, p, (l) >> 1 ) +#define _SMC_PULL_DATA(p, l) SMC_insw ( ioaddr, DATA_REG, p, (l) >> 1 ) +#elif SMC_CAN_USE_8BIT +#define _SMC_PUSH_DATA(p, l) SMC_outsb( ioaddr, DATA_REG, p, l ) +#define _SMC_PULL_DATA(p, l) SMC_insb ( ioaddr, DATA_REG, p, l ) +#endif + +#if ! SMC_CAN_USE_16BIT +#define SMC_outw(x, ioaddr, reg) \ + do { \ + unsigned int __val16 = (x); \ + SMC_outb( __val16, ioaddr, reg ); \ + SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ + } while (0) +#define SMC_inw(ioaddr, reg) \ + ({ \ + unsigned int __val16; \ + __val16 = SMC_inb( ioaddr, reg ); \ + __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ + __val16; \ + }) +#endif + +#if SMC_CAN_USE_DATACS +#define SMC_PUSH_DATA(p, l) \ + if ( lp->datacs ) { \ + unsigned char *__ptr = (p); \ + int __len = (l); \ + if (__len >= 2 && (unsigned long)__ptr & 2) { \ + __len -= 2; \ + SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \ + __ptr += 2; \ + } \ + outsl(lp->datacs, __ptr, __len >> 2); \ + if (__len & 2) { \ + __ptr += (__len & ~3); \ + SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \ + } \ + } else { \ + _SMC_PUSH_DATA(p, l); \ + } + +#define SMC_PULL_DATA(p, l) \ + if ( lp->datacs ) { \ + unsigned char *__ptr = (p); \ + int __len = (l); \ + if ((unsigned long)__ptr & 2) { \ + /* \ + * We want 32bit alignment here. \ + * Since some buses perform a full 32bit \ + * fetch even for 16bit data we can't use \ + * SMC_inw() here. Back both source (on chip \ + * and destination) pointers of 2 bytes. \ + */ \ + __ptr -= 2; \ + __len += 2; \ + SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \ + } \ + __len += 2; \ + insl( lp->datacs, __ptr, __len >> 2); \ + } else { \ + _SMC_PULL_DATA(p, l); \ + } +#else +#define SMC_PUSH_DATA(p, l) _SMC_PUSH_DATA(p, l) +#define SMC_PULL_DATA(p, l) _SMC_PULL_DATA(p, l) +#endif + +#if !defined (SMC_INTERRUPT_PREAMBLE) +# define SMC_INTERRUPT_PREAMBLE +#endif + +#endif /* _SMC91X_H_ */ |