nvmem: sort config symbols alphabetically

1. Match what most subsystems do
2. Simplify maintenance a bit
3. Reduce amount of conflicts for new drivers patches

While at it unify indent level in Makefile.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 151 insertions, 149 deletions

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 691375c13381..7f2557934834 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -21,6 +21,40 @@ config NVMEM_SYSFS
 	 This interface is mostly used by userspace applications to
 	 read/write directly into nvmem.
 
+# Devices
+
+config NVMEM_APPLE_EFUSES
+	tristate "Apple eFuse support"
+	depends on ARCH_APPLE || COMPILE_TEST
+	default ARCH_APPLE
+	help
+	  Say y here to enable support for reading eFuses on Apple SoCs
+	  such as the M1. These are e.g. used to store factory programmed
+	  calibration data required for the PCIe or the USB-C PHY.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-apple-efuses.
+
+config NVMEM_BCM_OCOTP
+	tristate "Broadcom On-Chip OTP Controller support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM
+	default ARCH_BCM_IPROC
+	help
+	  Say y here to enable read/write access to the Broadcom OTP
+	  controller.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-bcm-ocotp.
+
+config NVMEM_BRCM_NVRAM
+	tristate "Broadcom's NVRAM support"
+	depends on ARCH_BCM_5301X || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver provides support for Broadcom's NVRAM that can be accessed
+	  using I/O mapping.
+
 config NVMEM_IMX_IIM
 	tristate "i.MX IC Identification Module support"
 	depends on ARCH_MXC || COMPILE_TEST
@@ -64,6 +98,19 @@ config NVMEM_JZ4780_EFUSE
 	  To compile this driver as a module, choose M here: the module
 	  will be called nvmem_jz4780_efuse.
 
+config NVMEM_LAYERSCAPE_SFP
+	tristate "Layerscape SFP (Security Fuse Processor) support"
+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on HAS_IOMEM
+	select REGMAP_MMIO
+	help
+	  This driver provides support to read the eFuses on Freescale
+	  Layerscape SoC's. For example, the vendor provides a per part
+	  unique ID there.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called layerscape-sfp.
+
 config NVMEM_LPC18XX_EEPROM
 	tristate "NXP LPC18XX EEPROM Memory Support"
 	depends on ARCH_LPC18XX || COMPILE_TEST
@@ -84,17 +131,32 @@ config NVMEM_LPC18XX_OTP
 	  To compile this driver as a module, choose M here: the module
 	  will be called nvmem_lpc18xx_otp.
 
-config NVMEM_MXS_OCOTP
-	tristate "Freescale MXS On-Chip OTP Memory Support"
-	depends on ARCH_MXS || COMPILE_TEST
-	depends on HAS_IOMEM
+config NVMEM_MESON_EFUSE
+	tristate "Amlogic Meson GX eFuse Support"
+	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
 	help
-	  If you say Y here, you will get readonly access to the
-	  One Time Programmable memory pages that are stored
-	  on the Freescale i.MX23/i.MX28 processor.
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson GX SoCs.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called nvmem-mxs-ocotp.
+	  will be called nvmem_meson_efuse.
+
+config NVMEM_MESON_MX_EFUSE
+	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_mx_efuse.
+
+config NVMEM_MICROCHIP_OTPC
+	tristate "Microchip OTPC support"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  This driver enable the OTP controller available on Microchip SAMA7G5
+	  SoCs. It controlls the access to the OTP memory connected to it.
 
 config NVMEM_MTK_EFUSE
 	tristate "Mediatek SoCs EFUSE support"
@@ -107,12 +169,17 @@ config NVMEM_MTK_EFUSE
 	  This driver can also be built as a module. If so, the module
 	  will be called efuse-mtk.
 
-config NVMEM_MICROCHIP_OTPC
-	tristate "Microchip OTPC support"
-	depends on ARCH_AT91 || COMPILE_TEST
+config NVMEM_MXS_OCOTP
+	tristate "Freescale MXS On-Chip OTP Memory Support"
+	depends on ARCH_MXS || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
-	  This driver enable the OTP controller available on Microchip SAMA7G5
-	  SoCs. It controlls the access to the OTP memory connected to it.
+	  If you say Y here, you will get readonly access to the
+	  One Time Programmable memory pages that are stored
+	  on the Freescale i.MX23/i.MX28 processor.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-mxs-ocotp.
 
 config NVMEM_NINTENDO_OTP
 	tristate "Nintendo Wii and Wii U OTP Support"
@@ -137,13 +204,21 @@ config NVMEM_QCOM_QFPROM
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_qfprom.
 
-config NVMEM_SPMI_SDAM
-	tristate "SPMI SDAM Support"
-	depends on SPMI
+config NVMEM_RAVE_SP_EEPROM
+	tristate "Rave SP EEPROM Support"
+	depends on RAVE_SP_CORE
 	help
-	  This driver supports the Shared Direct Access Memory Module on
-	  Qualcomm Technologies, Inc. PMICs. It provides the clients
-	  an interface to read/write to the SDAM module's shared memory.
+	  Say y here to enable Rave SP EEPROM support.
+
+config NVMEM_RMEM
+	tristate "Reserved Memory Based Driver Support"
+	depends on HAS_IOMEM
+	help
+	  This driver maps reserved memory into an nvmem device. It might be
+	  useful to expose information left by firmware in memory.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-rmem.
 
 config NVMEM_ROCKCHIP_EFUSE
 	tristate "Rockchip eFuse Support"
@@ -167,79 +242,16 @@ config NVMEM_ROCKCHIP_OTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_rockchip_otp.
 
-config NVMEM_BCM_OCOTP
-	tristate "Broadcom On-Chip OTP Controller support"
-	depends on ARCH_BCM_IPROC || COMPILE_TEST
-	depends on HAS_IOMEM
-	default ARCH_BCM_IPROC
-	help
-	  Say y here to enable read/write access to the Broadcom OTP
-	  controller.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called nvmem-bcm-ocotp.
-
-config NVMEM_STM32_ROMEM
-	tristate "STMicroelectronics STM32 factory-programmed memory support"
-	depends on ARCH_STM32 || COMPILE_TEST
-	help
-	  Say y here to enable read-only access for STMicroelectronics STM32
-	  factory-programmed memory area.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called nvmem-stm32-romem.
-
-config NVMEM_SUNXI_SID
-	tristate "Allwinner SoCs SID support"
-	depends on ARCH_SUNXI
-	help
-	  This is a driver for the 'security ID' available on various Allwinner
-	  devices.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called nvmem_sunxi_sid.
-
-config NVMEM_UNIPHIER_EFUSE
-	tristate "UniPhier SoCs eFuse support"
-	depends on ARCH_UNIPHIER || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This is a simple driver to dump specified values of UniPhier SoC
-	  from eFuse.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called nvmem-uniphier-efuse.
-
-config NVMEM_VF610_OCOTP
-	tristate "VF610 SoC OCOTP support"
-	depends on SOC_VF610 || COMPILE_TEST
+config NVMEM_SC27XX_EFUSE
+	tristate "Spreadtrum SC27XX eFuse Support"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
-	  This is a driver for the 'OCOTP' peripheral available on Vybrid
-	  devices like VF5xx and VF6xx.
-
-	  This driver can also be build as a module. If so, the module will
-	  be called nvmem-vf610-ocotp.
-
-config NVMEM_MESON_EFUSE
-	tristate "Amlogic Meson GX eFuse Support"
-	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
-	help
-	  This is a driver to retrieve specific values from the eFuse found on
-	  the Amlogic Meson GX SoCs.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called nvmem_meson_efuse.
-
-config NVMEM_MESON_MX_EFUSE
-	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
-	depends on ARCH_MESON || COMPILE_TEST
-	help
-	  This is a driver to retrieve specific values from the eFuse found on
-	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
+	  This is a simple driver to dump specified values of Spreadtrum
+	  SC27XX PMICs from eFuse.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called nvmem_meson_mx_efuse.
+	  will be called nvmem-sc27xx-efuse.
 
 config NVMEM_SNVS_LPGPR
 	tristate "Support for Low Power General Purpose Register"
@@ -251,32 +263,13 @@ config NVMEM_SNVS_LPGPR
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-snvs-lpgpr.
 
-config NVMEM_RAVE_SP_EEPROM
-	tristate "Rave SP EEPROM Support"
-	depends on RAVE_SP_CORE
-	help
-	  Say y here to enable Rave SP EEPROM support.
-
-config NVMEM_SC27XX_EFUSE
-	tristate "Spreadtrum SC27XX eFuse Support"
-	depends on MFD_SC27XX_PMIC || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This is a simple driver to dump specified values of Spreadtrum
-	  SC27XX PMICs from eFuse.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called nvmem-sc27xx-efuse.
-
-config NVMEM_ZYNQMP
-	bool "Xilinx ZYNQMP SoC nvmem firmware support"
-	depends on ARCH_ZYNQMP
+config NVMEM_SPMI_SDAM
+	tristate "SPMI SDAM Support"
+	depends on SPMI
 	help
-	  This is a driver to access hardware related data like
-	  soc revision, IDCODE... etc by using the firmware
-	  interface.
-
-	  If sure, say yes. If unsure, say no.
+	  This driver supports the Shared Direct Access Memory Module on
+	  Qualcomm Technologies, Inc. PMICs. It provides the clients
+	  an interface to read/write to the SDAM module's shared memory.
 
 config NVMEM_SPRD_EFUSE
 	tristate "Spreadtrum SoC eFuse Support"
@@ -289,36 +282,15 @@ config NVMEM_SPRD_EFUSE
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-sprd-efuse.
 
-config NVMEM_RMEM
-	tristate "Reserved Memory Based Driver Support"
-	depends on HAS_IOMEM
-	help
-	  This driver maps reserved memory into an nvmem device. It might be
-	  useful to expose information left by firmware in memory.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called nvmem-rmem.
-
-config NVMEM_BRCM_NVRAM
-	tristate "Broadcom's NVRAM support"
-	depends on ARCH_BCM_5301X || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This driver provides support for Broadcom's NVRAM that can be accessed
-	  using I/O mapping.
-
-config NVMEM_LAYERSCAPE_SFP
-	tristate "Layerscape SFP (Security Fuse Processor) support"
-	depends on ARCH_LAYERSCAPE || COMPILE_TEST
-	depends on HAS_IOMEM
-	select REGMAP_MMIO
+config NVMEM_STM32_ROMEM
+	tristate "STMicroelectronics STM32 factory-programmed memory support"
+	depends on ARCH_STM32 || COMPILE_TEST
 	help
-	  This driver provides support to read the eFuses on Freescale
-	  Layerscape SoC's. For example, the vendor provides a per part
-	  unique ID there.
+	  Say y here to enable read-only access for STMicroelectronics STM32
+	  factory-programmed memory area.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called layerscape-sfp.
+	  will be called nvmem-stm32-romem.
 
 config NVMEM_SUNPLUS_OCOTP
 	tristate "Sunplus SoC OTP support"
@@ -332,17 +304,15 @@ config NVMEM_SUNPLUS_OCOTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-sunplus-ocotp.
 
-config NVMEM_APPLE_EFUSES
-	tristate "Apple eFuse support"
-	depends on ARCH_APPLE || COMPILE_TEST
-	default ARCH_APPLE
+config NVMEM_SUNXI_SID
+	tristate "Allwinner SoCs SID support"
+	depends on ARCH_SUNXI
 	help
-	  Say y here to enable support for reading eFuses on Apple SoCs
-	  such as the M1. These are e.g. used to store factory programmed
-	  calibration data required for the PCIe or the USB-C PHY.
+	  This is a driver for the 'security ID' available on various Allwinner
+	  devices.
 
-	  This driver can also be built as a module. If so, the module will
-	  be called nvmem-apple-efuses.
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_sunxi_sid.
 
 config NVMEM_U_BOOT_ENV
 	tristate "U-Boot environment variables support"
@@ -357,4 +327,36 @@ config NVMEM_U_BOOT_ENV
 
 	  If compiled as module it will be called nvmem_u-boot-env.
 
+config NVMEM_UNIPHIER_EFUSE
+	tristate "UniPhier SoCs eFuse support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of UniPhier SoC
+	  from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-uniphier-efuse.
+
+config NVMEM_VF610_OCOTP
+	tristate "VF610 SoC OCOTP support"
+	depends on SOC_VF610 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver for the 'OCOTP' peripheral available on Vybrid
+	  devices like VF5xx and VF6xx.
+
+	  This driver can also be build as a module. If so, the module will
+	  be called nvmem-vf610-ocotp.
+
+config NVMEM_ZYNQMP
+	bool "Xilinx ZYNQMP SoC nvmem firmware support"
+	depends on ARCH_ZYNQMP
+	help
+	  This is a driver to access hardware related data like
+	  soc revision, IDCODE... etc by using the firmware
+	  interface.
+
+	  If sure, say yes. If unsure, say no.
+
 endif