Merge branch 'pci/hotplug'

  - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

  - Remove unnecessary pciehp includes (Lukas Wunner)

  - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

  - Tolerate PCIe Slot Presence Detect being hardwired to zero to
    workaround broken hardware, e.g., the Wilocity switch/wireless device
    (Lukas Wunner)

  - Unify pciehp controller & slot structs (Lukas Wunner)

  - Constify hotplug_slot_ops (Lukas Wunner)

  - Drop hotplug_slot_info (Lukas Wunner)

  - Embed hotplug_slot struct into users instead of allocating it
    separately (Lukas Wunner)

  - Initialize PCIe port service drivers directly instead of relying on
    initcall ordering (Keith Busch)

  - Restore PCI config state after a slot reset (Keith Busch)

  - Save/restore DPC config state along with other PCI config state (Keith
    Busch)

  - Reference count devices during AER handling to avoid race issue with
    concurrent hot removal (Keith Busch)

  - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
    config space because it is probably unreachable (Keith Busch)

  - During error handling, use slot-specific reset instead of secondary
    bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

  - Restore previous AER/DPC handling that does not remove and re-enumerate
    devices on ERR_FATAL (Keith Busch)

  - Notify all drivers that may be affected by error recovery resets (Keith
    Busch)

  - Always generate error recovery uevents, even if a driver doesn't have
    error callbacks (Keith Busch)

  - Make PCIe link active reporting detection generic (Keith Busch)

  - Support D3cold in PCIe hierarchies during system sleep and runtime,
    including hotplug and Thunderbolt ports (Mika Westerberg)

  - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
    are empty or occupied (Jon Derrick)

  - Remove duplicated include from pci/pcie/err.c and unused variable from
    cpqphp (YueHaibing)

  - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
    Pawandeep)

  - Uninline PCI bus accessors for better ftracing (Keith Busch)

  - Remove unused AER Root Port .error_resume method (Keith Busch)

  - Use kfifo in AER instead of a local version (Keith Busch)

  - Use threaded IRQ in AER bottom half (Keith Busch)

  - Use managed resources in AER core (Keith Busch)

  - Reuse pcie_port_find_device() for AER injection (Keith Busch)

  - Abstract AER interrupt handling to disconnect error injection (Keith
    Busch)

  - Refactor AER injection callbacks to simplify future improvments (Keith
    Busch)

* pci/hotplug:
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI/AER: Use threaded IRQ for bottom half
  PCI/AER: Use kfifo_in_spinlocked() to insert locked elements
  PCI/AER: Use kfifo for tracking events instead of reimplementing it
  PCI/AER: Remove error source from AER struct aer_rpc
  PCI/AER: Remove unused aer_error_resume()
  PCI: Uninline PCI bus accessors for better ftracing
  PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls
  PCI: pnv_php: Use kmemdup()
  PCI: cpqphp: Remove set but not used variable 'physical_slot'
  PCI/ERR: Remove duplicated include from err.c
  PCI: Equalize hotplug memory and io for occupied and empty slots
  PCI / ACPI: Whitelist D3 for more PCIe hotplug ports
  ACPI / property: Allow multiple property compatible _DSD entries
  PCI/PME: Implement runtime PM callbacks
  PCI: pciehp: Implement runtime PM callbacks
  PCI/portdrv: Add runtime PM hooks for port service drivers
  PCI/portdrv: Resume upon exit from system suspend if left runtime suspended
  PCI: pciehp: Do not handle events if interrupts are masked
  PCI: pciehp: Disable hotplug interrupt during suspend
  PCI / ACPI: Enable wake automatically for power managed bridges
  PCI: Do not skip power-managed bridges in pci_enable_wake()
  PCI: Make link active reporting detection generic
  PCI: Unify device inaccessible
  PCI/ERR: Always report current recovery status for udev
  PCI/ERR: Simplify broadcast callouts
  PCI/ERR: Run error recovery callbacks for all affected devices
  PCI/ERR: Handle fatal error recovery
  PCI/ERR: Use slot reset if available
  PCI/AER: Don't read upstream ports below fatal errors
  PCI/AER: Take reference on error devices
  PCI/DPC: Save and restore config state
  PCI: portdrv: Restore PCI config state on slot reset
  PCI: portdrv: Initialize service drivers directly
  PCI: hotplug: Document TODOs
  PCI: hotplug: Embed hotplug_slot
  PCI: hotplug: Drop hotplug_slot_info
  PCI: hotplug: Constify hotplug_slot_ops
  PCI: pciehp: Reshuffle controller struct for clarity
  PCI: pciehp: Rename controller struct members for clarity
  PCI: pciehp: Unify controller and slot structs
  PCI: pciehp: Tolerate Presence Detect hardwired to zero
  PCI: pciehp: Drop hotplug_slot_ops wrappers
  PCI: pciehp: Drop unnecessary includes
  PCI: pciehp: Differentiate between surprise and safe removal
  PCI: Simplify disconnected marking

1 files changed, 56 insertions, 1 deletions

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 8f75ba068d45..79c8e955a0ab 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -519,6 +519,46 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
 	return PCI_POWER_ERROR;
 }
 
+static struct acpi_device *acpi_pci_find_companion(struct device *dev);
+
+static bool acpi_pci_bridge_d3(struct pci_dev *dev)
+{
+	const struct fwnode_handle *fwnode;
+	struct acpi_device *adev;
+	struct pci_dev *root;
+	u8 val;
+
+	if (!dev->is_hotplug_bridge)
+		return false;
+
+	/*
+	 * Look for a special _DSD property for the root port and if it
+	 * is set we know the hierarchy behind it supports D3 just fine.
+	 */
+	root = pci_find_pcie_root_port(dev);
+	if (!root)
+		return false;
+
+	adev = ACPI_COMPANION(&root->dev);
+	if (root == dev) {
+		/*
+		 * It is possible that the ACPI companion is not yet bound
+		 * for the root port so look it up manually here.
+		 */
+		if (!adev && !pci_dev_is_added(root))
+			adev = acpi_pci_find_companion(&root->dev);
+	}
+
+	if (!adev)
+		return false;
+
+	fwnode = acpi_fwnode_handle(adev);
+	if (fwnode_property_read_u8(fwnode, "HotPlugSupportInD3", &val))
+		return false;
+
+	return val == 1;
+}
+
 static bool acpi_pci_power_manageable(struct pci_dev *dev)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
@@ -635,6 +675,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev)
 }
 
 static const struct pci_platform_pm_ops acpi_pci_platform_pm = {
+	.bridge_d3 = acpi_pci_bridge_d3,
 	.is_manageable = acpi_pci_power_manageable,
 	.set_state = acpi_pci_set_power_state,
 	.get_state = acpi_pci_get_power_state,
@@ -767,19 +808,33 @@ static void pci_acpi_setup(struct device *dev)
 		return;
 
 	device_set_wakeup_capable(dev, true);
+	/*
+	 * For bridges that can do D3 we enable wake automatically (as
+	 * we do for the power management itself in that case). The
+	 * reason is that the bridge may have additional methods such as
+	 * _DSW that need to be called.
+	 */
+	if (pci_dev->bridge_d3)
+		device_wakeup_enable(dev);
+
 	acpi_pci_wakeup(pci_dev, false);
 }
 
 static void pci_acpi_cleanup(struct device *dev)
 {
 	struct acpi_device *adev = ACPI_COMPANION(dev);
+	struct pci_dev *pci_dev = to_pci_dev(dev);
 
 	if (!adev)
 		return;
 
 	pci_acpi_remove_pm_notifier(adev);
-	if (adev->wakeup.flags.valid)
+	if (adev->wakeup.flags.valid) {
+		if (pci_dev->bridge_d3)
+			device_wakeup_disable(dev);
+
 		device_set_wakeup_capable(dev, false);
+	}
 }
 
 static bool pci_acpi_bus_match(struct device *dev)