diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-03-20 10:10:46 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-03-20 10:10:46 +0100 |
commit | 85a09bf492333300ca0a09199bce4cf1a5bdd5cb (patch) | |
tree | 8209918ef0d536cb401247f315a3aba60b15bdf5 /drivers/phy | |
parent | a8f25c36f7322fd089e6d006b4e3708038882561 (diff) | |
parent | e7f4da4c44fe74e1c9277bac9b12ea1ef4eb70db (diff) | |
download | linux-stable-85a09bf492333300ca0a09199bce4cf1a5bdd5cb.tar.gz linux-stable-85a09bf492333300ca0a09199bce4cf1a5bdd5cb.tar.bz2 linux-stable-85a09bf492333300ca0a09199bce4cf1a5bdd5cb.zip |
Merge tag 'phy-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 4.17
*) Add USB PHY driver for MDM6600 on Droid
*) Add USB PHY driver for STM32 USB PHY Controller
*) Add inno-usb2-phy driver for hi3798cv200 SoC
*) Add combo phy driver (SATA/USB/PCIE) for HiSilicon STB SoCs
*) Add USB3 PHY driver for Meson GXL and GXM
*) Add support for R8A77965 Gen3 USB 2.0 PHY in phy-rcar-gen3-usb2 driver
*) Add support for qualcomm QUSB2 V2 and QMP V3 USB3 PHY in phy-qcom-qusb2
and phy-qcom-qmp PHY driver respectively
*) Add support for runtime PM in phy-qcom-qusb2 and phy-qcom-qmp PHY drivers
*) Add support for Allwinner R40 USB PHY in sun4i-usb PHY driver
*) Add support in rockchip-typec PHY driver to make extcon optional and
fallback to working in host mode if extcon is missing
*) Add support in rockchip-typec PHY driver to mux PHYs connected to DP
*) Add support to configure slew rate parameters in phy-mtk-tphy PHY driver
*) Add workaround for missing Vbus det interrupts on Allwinner A23/A33
*) Add USB speed related PHY modes in phy core
*) Fix PHY 'structure' documentation
*) Force rockchip-typec PHY to USB2 if DP-only mode is used
*) Fix phy-qcom-qusb2 and phy-qcom-qmp PHY drivers to follow PHY reset and
initialization sequence as per hardware programming manual
*) Fix Marvell BG2CD SoC USB failure in phy-berlin-usb driver
*) Minor fixes in lpc18xx-usb-otg, xusb-tegra210 and phy-rockchip-emmc PHY
drivers
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
30 files changed, 3153 insertions, 394 deletions
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index aa857be692cf..d4dcd39b8d76 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -112,6 +112,7 @@ enum sun4i_usb_phy_type { sun8i_a33_phy, sun8i_a83t_phy, sun8i_h3_phy, + sun8i_r40_phy, sun8i_v3s_phy, sun50i_a64_phy, }; @@ -410,11 +411,13 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data) return true; /* - * The A31 companion pmic (axp221) does not generate vbus change - * interrupts when the board is driving vbus, so we must poll + * The A31/A23/A33 companion pmics (AXP221/AXP223) do not + * generate vbus change interrupts when the board is driving + * vbus using the N_VBUSEN pin on the pmic, so we must poll * when using the pmic for vbus-det _and_ we're driving vbus. */ - if (data->cfg->type == sun6i_a31_phy && + if ((data->cfg->type == sun6i_a31_phy || + data->cfg->type == sun8i_a33_phy) && data->vbus_power_supply && data->phys[0].regulator_on) return true; @@ -885,7 +888,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { .num_phys = 2, - .type = sun4i_a10_phy, + .type = sun6i_a31_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, @@ -919,6 +922,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { .phy0_dual_route = true, }; +static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { + .num_phys = 3, + .type = sun8i_r40_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .enable_pmu_unk1 = true, + .phy0_dual_route = true, +}; + static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { .num_phys = 1, .type = sun8i_v3s_phy, @@ -948,6 +961,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg }, { .compatible = "allwinner,sun8i-a83t-usb-phy", .data = &sun8i_a83t_cfg }, { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg }, + { .compatible = "allwinner,sun8i-r40-usb-phy", .data = &sun8i_r40_cfg }, { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg }, { .compatible = "allwinner,sun50i-a64-usb-phy", .data = &sun50i_a64_cfg}, diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index cb8f4501652b..23fe1cda2f70 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -18,10 +18,21 @@ config PHY_MESON_GXL_USB2 default ARCH_MESON depends on OF && (ARCH_MESON || COMPILE_TEST) depends on USB_SUPPORT - select USB_COMMON select GENERIC_PHY select REGMAP_MMIO help Enable this to support the Meson USB2 PHYs found in Meson GXL and GXM SoCs. If unsure, say N. + +config PHY_MESON_GXL_USB3 + tristate "Meson GXL and GXM USB3 PHY drivers" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + depends on USB_SUPPORT + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson USB3 PHY and OTG detection + IP block found in Meson GXL and GXM SoCs. + If unsure, say N. diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index cfdc98715c30..4fd8848c194d 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o +obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index e90c4ee25dfe..9f9b5414b97a 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -11,14 +11,15 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> -#include <linux/usb/of.h> /* bits [31:27] are read-only */ #define U2P_R0 0x0 @@ -70,12 +71,11 @@ /* bits [31:14] are read-only */ #define U2P_R2 0x8 - #define U2P_R2_DATA_IN_MASK GENMASK(3, 0) - #define U2P_R2_DATA_IN_EN_MASK GENMASK(7, 4) - #define U2P_R2_ADDR_MASK GENMASK(11, 8) - #define U2P_R2_DATA_OUT_SEL BIT(12) - #define U2P_R2_CLK BIT(13) - #define U2P_R2_DATA_OUT_MASK GENMASK(17, 14) + #define U2P_R2_TESTDATA_IN_MASK GENMASK(7, 0) + #define U2P_R2_TESTADDR_MASK GENMASK(11, 8) + #define U2P_R2_TESTDATA_OUT_SEL BIT(12) + #define U2P_R2_TESTCLK BIT(13) + #define U2P_R2_TESTDATA_OUT_MASK GENMASK(17, 14) #define U2P_R2_ACA_PIN_RANGE_C BIT(18) #define U2P_R2_ACA_PIN_RANGE_B BIT(19) #define U2P_R2_ACA_PIN_RANGE_A BIT(20) @@ -99,6 +99,8 @@ struct phy_meson_gxl_usb2_priv { struct regmap *regmap; enum phy_mode mode; int is_enabled; + struct clk *clk; + struct reset_control *reset; }; static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = { @@ -108,6 +110,31 @@ static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = { .max_register = U2P_R3, }; +static int phy_meson_gxl_usb2_init(struct phy *phy) +{ + struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = reset_control_reset(priv->reset); + if (ret) + return ret; + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + return 0; +} + +static int phy_meson_gxl_usb2_exit(struct phy *phy) +{ + struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + + clk_disable_unprepare(priv->clk); + + return 0; +} + static int phy_meson_gxl_usb2_reset(struct phy *phy) { struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); @@ -195,6 +222,8 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy) } static const struct phy_ops phy_meson_gxl_usb2_ops = { + .init = phy_meson_gxl_usb2_init, + .exit = phy_meson_gxl_usb2_exit, .power_on = phy_meson_gxl_usb2_power_on, .power_off = phy_meson_gxl_usb2_power_off, .set_mode = phy_meson_gxl_usb2_set_mode, @@ -210,6 +239,7 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) struct phy_meson_gxl_usb2_priv *priv; struct phy *phy; void __iomem *base; + int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -222,28 +252,34 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - switch (of_usb_get_dr_mode_by_phy(dev->of_node, -1)) { - case USB_DR_MODE_PERIPHERAL: - priv->mode = PHY_MODE_USB_DEVICE; - break; - case USB_DR_MODE_OTG: - priv->mode = PHY_MODE_USB_OTG; - break; - case USB_DR_MODE_HOST: - default: - priv->mode = PHY_MODE_USB_HOST; - break; - } + /* start in host mode */ + priv->mode = PHY_MODE_USB_HOST; priv->regmap = devm_regmap_init_mmio(dev, base, &phy_meson_gxl_usb2_regmap_conf); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); + priv->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(priv->clk)) { + ret = PTR_ERR(priv->clk); + if (ret == -ENOENT) + priv->clk = NULL; + else + return ret; + } + + priv->reset = devm_reset_control_get_optional_shared(dev, "phy"); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops); if (IS_ERR(phy)) { - dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(phy); + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + + return ret; } phy_set_drvdata(phy, priv); diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb3.c b/drivers/phy/amlogic/phy-meson-gxl-usb3.c new file mode 100644 index 000000000000..d37d94ddf9c0 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-gxl-usb3.c @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Meson GXL USB3 PHY and OTG mode detection driver + * + * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/platform_device.h> + +#define USB_R0 0x00 + #define USB_R0_P30_FSEL_MASK GENMASK(5, 0) + #define USB_R0_P30_PHY_RESET BIT(6) + #define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7) + #define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8) + #define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9) + #define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14) + #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17) + #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18) + #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19) + #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29) + #define USB_R0_U2D_ACT BIT(31) + +#define USB_R1 0x04 + #define USB_R1_U3H_BIGENDIAN_GS BIT(0) + #define USB_R1_U3H_PME_ENABLE BIT(1) + #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2) + #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7) + #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12) + #define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16) + #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17) + #define USB_R1_U3H_HOST_MSI_ENABLE BIT(18) + #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19) + #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25) + +#define USB_R2 0x08 + #define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0) + #define USB_R2_P30_CR_READ BIT(16) + #define USB_R2_P30_CR_WRITE BIT(17) + #define USB_R2_P30_CR_CAP_ADDR BIT(18) + #define USB_R2_P30_CR_CAP_DATA BIT(19) + #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20) + #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26) + +#define USB_R3 0x0c + #define USB_R3_P30_SSC_ENABLE BIT(0) + #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1) + #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4) + #define USB_R3_P30_REF_SSP_EN BIT(13) + #define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16) + #define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19) + #define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24) + +#define USB_R4 0x10 + #define USB_R4_P21_PORT_RESET_0 BIT(0) + #define USB_R4_P21_SLEEP_M0 BIT(1) + #define USB_R4_MEM_PD_MASK GENMASK(3, 2) + #define USB_R4_P21_ONLY BIT(4) + +#define USB_R5 0x14 + #define USB_R5_ID_DIG_SYNC BIT(0) + #define USB_R5_ID_DIG_REG BIT(1) + #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2) + #define USB_R5_ID_DIG_EN_0 BIT(4) + #define USB_R5_ID_DIG_EN_1 BIT(5) + #define USB_R5_ID_DIG_CURR BIT(6) + #define USB_R5_ID_DIG_IRQ BIT(7) + #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8) + #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16) + +/* read-only register */ +#define USB_R6 0x18 + #define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0) + #define USB_R6_P30_CR_ACK BIT(16) + +struct phy_meson_gxl_usb3_priv { + struct regmap *regmap; + enum phy_mode mode; + struct clk *clk_phy; + struct clk *clk_peripheral; + struct reset_control *reset; +}; + +static const struct regmap_config phy_meson_gxl_usb3_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = USB_R6, +}; + +static int phy_meson_gxl_usb3_power_on(struct phy *phy) +{ + struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); + + regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, + USB_R5_ID_DIG_EN_0); + regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, + USB_R5_ID_DIG_EN_1); + regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_TH_MASK, + FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff)); + + return 0; +} + +static int phy_meson_gxl_usb3_power_off(struct phy *phy) +{ + struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); + + regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, 0); + regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, 0); + + return 0; +} + +static int phy_meson_gxl_usb3_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); + + switch (mode) { + case PHY_MODE_USB_HOST: + regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, 0); + regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, + 0); + break; + + case PHY_MODE_USB_DEVICE: + regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, + USB_R0_U2D_ACT); + regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, + USB_R4_P21_SLEEP_M0); + break; + + default: + dev_err(&phy->dev, "unsupported PHY mode %d\n", mode); + return -EINVAL; + } + + priv->mode = mode; + + return 0; +} + +static int phy_meson_gxl_usb3_init(struct phy *phy) +{ + struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = reset_control_reset(priv->reset); + if (ret) + goto err; + + ret = clk_prepare_enable(priv->clk_phy); + if (ret) + goto err; + + ret = clk_prepare_enable(priv->clk_peripheral); + if (ret) + goto err_disable_clk_phy; + + ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode); + if (ret) + goto err_disable_clk_peripheral; + + regmap_update_bits(priv->regmap, USB_R1, + USB_R1_U3H_FLADJ_30MHZ_REG_MASK, + FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20)); + + return 0; + +err_disable_clk_peripheral: + clk_disable_unprepare(priv->clk_peripheral); +err_disable_clk_phy: + clk_disable_unprepare(priv->clk_phy); +err: + return ret; +} + +static int phy_meson_gxl_usb3_exit(struct phy *phy) +{ + struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); + + clk_disable_unprepare(priv->clk_peripheral); + clk_disable_unprepare(priv->clk_phy); + + return 0; +} + +static const struct phy_ops phy_meson_gxl_usb3_ops = { + .power_on = phy_meson_gxl_usb3_power_on, + .power_off = phy_meson_gxl_usb3_power_off, + .set_mode = phy_meson_gxl_usb3_set_mode, + .init = phy_meson_gxl_usb3_init, + .exit = phy_meson_gxl_usb3_exit, + .owner = THIS_MODULE, +}; + +static int phy_meson_gxl_usb3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_meson_gxl_usb3_priv *priv; + struct resource *res; + struct phy *phy; + struct phy_provider *phy_provider; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_meson_gxl_usb3_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->clk_phy = devm_clk_get(dev, "phy"); + if (IS_ERR(priv->clk_phy)) + return PTR_ERR(priv->clk_phy); + + priv->clk_peripheral = devm_clk_get(dev, "peripheral"); + if (IS_ERR(priv->clk_peripheral)) + return PTR_ERR(priv->clk_peripheral); + + priv->reset = devm_reset_control_array_get_shared(dev); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + /* + * default to host mode as hardware defaults and/or boot-loader + * behavior can result in this PHY starting up in device mode. this + * default and the initialization in phy_meson_gxl_usb3_init ensure + * that we reproducibly start in a known mode on all devices. + */ + priv->mode = PHY_MODE_USB_HOST; + + phy = devm_phy_create(dev, np, &phy_meson_gxl_usb3_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + + return ret; + } + + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id phy_meson_gxl_usb3_of_match[] = { + { .compatible = "amlogic,meson-gxl-usb3-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb3_of_match); + +static struct platform_driver phy_meson_gxl_usb3_driver = { + .probe = phy_meson_gxl_usb3_probe, + .driver = { + .name = "phy-meson-gxl-usb3", + .of_match_table = phy_meson_gxl_usb3_of_match, + }, +}; +module_platform_driver(phy_meson_gxl_usb3_driver); + +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); +MODULE_DESCRIPTION("Meson GXL USB3 PHY and OTG detection driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index 6164c4cd0f65..b40ee54a1a50 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -4,6 +4,7 @@ config PHY_HI6220_USB tristate "hi6220 USB PHY support" depends on (ARCH_HISI && ARM64) || COMPILE_TEST + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help @@ -11,6 +12,25 @@ config PHY_HI6220_USB To compile this driver as a module, choose M here. +config PHY_HISTB_COMBPHY + tristate "HiSilicon STB SoCs COMBPHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON STB SoCs COMBPHY. + If unsure, say N. + +config PHY_HISI_INNO_USB2 + tristate "HiSilicon INNO USB2 PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Support for INNO USB2 PHY on HiSilicon SoCs. This Phy supports + USB 1.5Mb/s, USB 12Mb/s, USB 480Mb/s speeds. It supports one + USB host port to accept one USB device. + config PHY_HIX5HD2_SATA tristate "HIX5HD2 SATA PHY Driver" depends on ARCH_HIX5HD2 && OF && HAS_IOMEM diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile index 541b348187a8..f662a4fe18d8 100644 --- a/drivers/phy/hisilicon/Makefile +++ b/drivers/phy/hisilicon/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o +obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o +obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c new file mode 100644 index 000000000000..524381249a2b --- /dev/null +++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c @@ -0,0 +1,197 @@ +/* + * HiSilicon INNO USB2 PHY Driver. + * + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/reset.h> + +#define INNO_PHY_PORT_NUM 2 +#define REF_CLK_STABLE_TIME 100 /* unit:us */ +#define UTMI_CLK_STABLE_TIME 200 /* unit:us */ +#define TEST_CLK_STABLE_TIME 2 /* unit:ms */ +#define PHY_CLK_STABLE_TIME 2 /* unit:ms */ +#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */ +#define POR_RST_COMPLETE_TIME 300 /* unit:us */ +#define PHY_TEST_DATA GENMASK(7, 0) +#define PHY_TEST_ADDR GENMASK(15, 8) +#define PHY_TEST_PORT GENMASK(18, 16) +#define PHY_TEST_WREN BIT(21) +#define PHY_TEST_CLK BIT(22) /* rising edge active */ +#define PHY_TEST_RST BIT(23) /* low active */ +#define PHY_CLK_ENABLE BIT(2) + +struct hisi_inno_phy_port { + struct reset_control *utmi_rst; + struct hisi_inno_phy_priv *priv; +}; + +struct hisi_inno_phy_priv { + void __iomem *mmio; + struct clk *ref_clk; + struct reset_control *por_rst; + struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM]; +}; + +static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv, + u8 port, u32 addr, u32 data) +{ + void __iomem *reg = priv->mmio; + u32 val; + + val = (data & PHY_TEST_DATA) | + ((addr << 8) & PHY_TEST_ADDR) | + ((port << 16) & PHY_TEST_PORT) | + PHY_TEST_WREN | PHY_TEST_RST; + writel(val, reg); + + val |= PHY_TEST_CLK; + writel(val, reg); + + val &= ~PHY_TEST_CLK; + writel(val, reg); +} + +static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv) +{ + /* The phy clk is controlled by the port0 register 0x06. */ + hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE); + msleep(PHY_CLK_STABLE_TIME); +} + +static int hisi_inno_phy_init(struct phy *phy) +{ + struct hisi_inno_phy_port *port = phy_get_drvdata(phy); + struct hisi_inno_phy_priv *priv = port->priv; + int ret; + + ret = clk_prepare_enable(priv->ref_clk); + if (ret) + return ret; + udelay(REF_CLK_STABLE_TIME); + + reset_control_deassert(priv->por_rst); + udelay(POR_RST_COMPLETE_TIME); + + /* Set up phy registers */ + hisi_inno_phy_setup(priv); + + reset_control_deassert(port->utmi_rst); + udelay(UTMI_RST_COMPLETE_TIME); + + return 0; +} + +static int hisi_inno_phy_exit(struct phy *phy) +{ + struct hisi_inno_phy_port *port = phy_get_drvdata(phy); + struct hisi_inno_phy_priv *priv = port->priv; + + reset_control_assert(port->utmi_rst); + reset_control_assert(priv->por_rst); + clk_disable_unprepare(priv->ref_clk); + + return 0; +} + +static const struct phy_ops hisi_inno_phy_ops = { + .init = hisi_inno_phy_init, + .exit = hisi_inno_phy_exit, + .owner = THIS_MODULE, +}; + +static int hisi_inno_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct hisi_inno_phy_priv *priv; + struct phy_provider *provider; + struct device_node *child; + struct resource *res; + int i = 0; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + priv->ref_clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->ref_clk)) + return PTR_ERR(priv->ref_clk); + + priv->por_rst = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(priv->por_rst)) + return PTR_ERR(priv->por_rst); + + for_each_child_of_node(np, child) { + struct reset_control *rst; + struct phy *phy; + + rst = of_reset_control_get_exclusive(child, NULL); + if (IS_ERR(rst)) + return PTR_ERR(rst); + priv->ports[i].utmi_rst = rst; + priv->ports[i].priv = priv; + + phy = devm_phy_create(dev, child, &hisi_inno_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, &priv->ports[i]); + i++; + + if (i > INNO_PHY_PORT_NUM) { + dev_warn(dev, "Support %d ports in maximum\n", i); + break; + } + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id hisi_inno_phy_of_match[] = { + { .compatible = "hisilicon,inno-usb2-phy", }, + { .compatible = "hisilicon,hi3798cv200-usb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match); + +static struct platform_driver hisi_inno_phy_driver = { + .probe = hisi_inno_phy_probe, + .driver = { + .name = "hisi-inno-phy", + .of_match_table = hisi_inno_phy_of_match, + } +}; +module_platform_driver(hisi_inno_phy_driver); + +MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/hisilicon/phy-histb-combphy.c b/drivers/phy/hisilicon/phy-histb-combphy.c new file mode 100644 index 000000000000..5777b3120017 --- /dev/null +++ b/drivers/phy/hisilicon/phy-histb-combphy.c @@ -0,0 +1,289 @@ +/* + * COMBPHY driver for HiSilicon STB SoCs + * + * Copyright (C) 2016-2017 HiSilicon Co., Ltd. http://www.hisilicon.com + * + * Authors: Jianguo Sun <sunjianguo1@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <dt-bindings/phy/phy.h> + +#define COMBPHY_MODE_PCIE 0 +#define COMBPHY_MODE_USB3 1 +#define COMBPHY_MODE_SATA 2 + +#define COMBPHY_CFG_REG 0x0 +#define COMBPHY_BYPASS_CODEC BIT(31) +#define COMBPHY_TEST_WRITE BIT(24) +#define COMBPHY_TEST_DATA_SHIFT 20 +#define COMBPHY_TEST_DATA_MASK GENMASK(23, 20) +#define COMBPHY_TEST_ADDR_SHIFT 12 +#define COMBPHY_TEST_ADDR_MASK GENMASK(16, 12) +#define COMBPHY_CLKREF_OUT_OEN BIT(0) + +struct histb_combphy_mode { + int fixed; + int select; + u32 reg; + u32 shift; + u32 mask; +}; + +struct histb_combphy_priv { + void __iomem *mmio; + struct regmap *syscon; + struct reset_control *por_rst; + struct clk *ref_clk; + struct phy *phy; + struct histb_combphy_mode mode; +}; + +static void nano_register_write(struct histb_combphy_priv *priv, + u32 addr, u32 data) +{ + void __iomem *reg = priv->mmio + COMBPHY_CFG_REG; + u32 val; + + /* Set up address and data for the write */ + val = readl(reg); + val &= ~COMBPHY_TEST_ADDR_MASK; + val |= addr << COMBPHY_TEST_ADDR_SHIFT; + val &= ~COMBPHY_TEST_DATA_MASK; + val |= data << COMBPHY_TEST_DATA_SHIFT; + writel(val, reg); + + /* Flip strobe control to trigger the write */ + val &= ~COMBPHY_TEST_WRITE; + writel(val, reg); + val |= COMBPHY_TEST_WRITE; + writel(val, reg); +} + +static int is_mode_fixed(struct histb_combphy_mode *mode) +{ + return (mode->fixed != PHY_NONE) ? true : false; +} + +static int histb_combphy_set_mode(struct histb_combphy_priv *priv) +{ + struct histb_combphy_mode *mode = &priv->mode; + struct regmap *syscon = priv->syscon; + u32 hw_sel; + + if (is_mode_fixed(mode)) + return 0; + + switch (mode->select) { + case PHY_TYPE_SATA: + hw_sel = COMBPHY_MODE_SATA; + break; + case PHY_TYPE_PCIE: + hw_sel = COMBPHY_MODE_PCIE; + break; + case PHY_TYPE_USB3: + hw_sel = COMBPHY_MODE_USB3; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(syscon, mode->reg, mode->mask, + hw_sel << mode->shift); +} + +static int histb_combphy_init(struct phy *phy) +{ + struct histb_combphy_priv *priv = phy_get_drvdata(phy); + u32 val; + int ret; + + ret = histb_combphy_set_mode(priv); + if (ret) + return ret; + + /* Clear bypass bit to enable encoding/decoding */ + val = readl(priv->mmio + COMBPHY_CFG_REG); + val &= ~COMBPHY_BYPASS_CODEC; + writel(val, priv->mmio + COMBPHY_CFG_REG); + + ret = clk_prepare_enable(priv->ref_clk); + if (ret) + return ret; + + reset_control_deassert(priv->por_rst); + + /* Enable EP clock */ + val = readl(priv->mmio + COMBPHY_CFG_REG); + val |= COMBPHY_CLKREF_OUT_OEN; + writel(val, priv->mmio + COMBPHY_CFG_REG); + + /* Need to wait for EP clock stable */ + mdelay(5); + + /* Configure nano phy registers as suggested by vendor */ + nano_register_write(priv, 0x1, 0x8); + nano_register_write(priv, 0xc, 0x9); + nano_register_write(priv, 0x1a, 0x4); + + return 0; +} + +static int histb_combphy_exit(struct phy *phy) +{ + struct histb_combphy_priv *priv = phy_get_drvdata(phy); + u32 val; + + /* Disable EP clock */ + val = readl(priv->mmio + COMBPHY_CFG_REG); + val &= ~COMBPHY_CLKREF_OUT_OEN; + writel(val, priv->mmio + COMBPHY_CFG_REG); + + reset_control_assert(priv->por_rst); + clk_disable_unprepare(priv->ref_clk); + + return 0; +} + +static const struct phy_ops histb_combphy_ops = { + .init = histb_combphy_init, + .exit = histb_combphy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *histb_combphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct histb_combphy_priv *priv = dev_get_drvdata(dev); + struct histb_combphy_mode *mode = &priv->mode; + + if (args->args_count < 1) { + dev_err(dev, "invalid number of arguments\n"); + return ERR_PTR(-EINVAL); + } + + mode->select = args->args[0]; + + if (mode->select < PHY_TYPE_SATA || mode->select > PHY_TYPE_USB3) { + dev_err(dev, "invalid phy mode select argument\n"); + return ERR_PTR(-EINVAL); + } + + if (is_mode_fixed(mode) && mode->select != mode->fixed) { + dev_err(dev, "mode select %d mismatch fixed phy mode %d\n", + mode->select, mode->fixed); + return ERR_PTR(-EINVAL); + } + + return priv->phy; +} + +static int histb_combphy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct histb_combphy_priv *priv; + struct device_node *np = dev->of_node; + struct histb_combphy_mode *mode; + struct resource *res; + u32 vals[3]; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + priv->syscon = syscon_node_to_regmap(np->parent); + if (IS_ERR(priv->syscon)) { + dev_err(dev, "failed to find peri_ctrl syscon regmap\n"); + return PTR_ERR(priv->syscon); + } + + mode = &priv->mode; + mode->fixed = PHY_NONE; + + ret = of_property_read_u32(np, "hisilicon,fixed-mode", &mode->fixed); + if (ret == 0) + dev_dbg(dev, "found fixed phy mode %d\n", mode->fixed); + + ret = of_property_read_u32_array(np, "hisilicon,mode-select-bits", + vals, ARRAY_SIZE(vals)); + if (ret == 0) { + if (is_mode_fixed(mode)) { + dev_err(dev, "found select bits for fixed mode phy\n"); + return -EINVAL; + } + + mode->reg = vals[0]; + mode->shift = vals[1]; + mode->mask = vals[2]; + dev_dbg(dev, "found mode select bits\n"); + } else { + if (!is_mode_fixed(mode)) { + dev_err(dev, "no valid select bits found for non-fixed phy\n"); + return -ENODEV; + } + } + + priv->ref_clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->ref_clk)) { + dev_err(dev, "failed to find ref clock\n"); + return PTR_ERR(priv->ref_clk); + } + + priv->por_rst = devm_reset_control_get(dev, NULL); + if (IS_ERR(priv->por_rst)) { + dev_err(dev, "failed to get poweron reset\n"); + return PTR_ERR(priv->por_rst); + } + + priv->phy = devm_phy_create(dev, NULL, &histb_combphy_ops); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create combphy\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, histb_combphy_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id histb_combphy_of_match[] = { + { .compatible = "hisilicon,hi3798cv200-combphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, histb_combphy_of_match); + +static struct platform_driver histb_combphy_driver = { + .probe = histb_combphy_probe, + .driver = { + .name = "combphy", + .of_match_table = histb_combphy_of_match, + }, +}; +module_platform_driver(histb_combphy_driver); + +MODULE_DESCRIPTION("HiSilicon STB COMBPHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/marvell/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c index 2017751ede26..8f2b5cae360f 100644 --- a/drivers/phy/marvell/phy-berlin-usb.c +++ b/drivers/phy/marvell/phy-berlin-usb.c @@ -127,7 +127,7 @@ static int phy_berlin_usb_power_on(struct phy *phy) writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5), priv->base + USB_PHY_ANALOG); writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 | - DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) | + DISCON_THRESHOLD_270 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) | INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL); writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1); diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 1e96d0740ef5..38c281b5abbb 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -306,6 +306,8 @@ struct mtk_tphy { const struct mtk_phy_pdata *pdata; struct mtk_phy_instance **phys; int nphys; + int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ + int src_coef; /* coefficient for slew rate calibrate */ }; static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, @@ -360,16 +362,17 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, writel(tmp, fmreg + U3P_U2FREQ_FMMONR1); if (fm_out) { - /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */ - tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF; - tmp /= fm_out; + /* ( 1024 / FM_OUT ) x reference clock frequency x coef */ + tmp = tphy->src_ref_clk * tphy->src_coef; + tmp = (tmp * U3P_FM_DET_CYCLE_CNT) / fm_out; calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR); } else { /* if FM detection fail, set default value */ calibration_val = 4; } - dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d\n", - instance->index, fm_out, calibration_val); + dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n", + instance->index, fm_out, calibration_val, + tphy->src_ref_clk, tphy->src_coef); /* set HS slew rate */ tmp = readl(com + U3P_USBPHYACR5); @@ -688,8 +691,7 @@ static void pcie_phy_instance_power_on(struct mtk_tphy *tphy, u32 tmp; tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD); - tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN | - P3C_REG_IP_SW_RST); + tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST); writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD); tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE); @@ -1042,6 +1044,13 @@ static int mtk_tphy_probe(struct platform_device *pdev) tphy->u3phya_ref = NULL; } + tphy->src_ref_clk = U3P_REF_CLK; + tphy->src_coef = U3P_SLEW_RATE_COEF; + /* update parameters of slew rate calibrate if exist */ + device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", + &tphy->src_ref_clk); + device_property_read_u32(dev, "mediatek,src-coef", &tphy->src_coef); + port = 0; for_each_child_of_node(np, child_np) { struct mtk_phy_instance *instance; diff --git a/drivers/phy/motorola/Kconfig b/drivers/phy/motorola/Kconfig index 6bb7d6bdf1bf..82651524ffb9 100644 --- a/drivers/phy/motorola/Kconfig +++ b/drivers/phy/motorola/Kconfig @@ -10,3 +10,11 @@ config PHY_CPCAP_USB help Enable this for USB to work on Motorola phones and tablets such as Droid 4. + +config PHY_MAPPHONE_MDM6600 + tristate "Motorola Mapphone MDM6600 modem USB PHY driver" + depends on OF && USB_SUPPORT + select GENERIC_PHY + help + Enable this for MDM6600 USB modem to work on Motorola phones + and tablets such as Droid 4. diff --git a/drivers/phy/motorola/Makefile b/drivers/phy/motorola/Makefile index b6cd618d671a..3514f985b355 100644 --- a/drivers/phy/motorola/Makefile +++ b/drivers/phy/motorola/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_PHY_CPCAP_USB) += phy-cpcap-usb.o +obj-$(CONFIG_PHY_MAPPHONE_MDM6600) += phy-mapphone-mdm6600.o diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c new file mode 100644 index 000000000000..5439dd90d0dd --- /dev/null +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Motorola Mapphone MDM6600 modem GPIO controlled USB PHY driver + * Copyright (C) 2018 Tony Lindgren <tony@atomide.com> + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <linux/gpio/consumer.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> + +#define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */ +#define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */ + +enum phy_mdm6600_ctrl_lines { + PHY_MDM6600_ENABLE, /* USB PHY enable */ + PHY_MDM6600_POWER, /* Device power */ + PHY_MDM6600_RESET, /* Device reset */ + PHY_MDM6600_NR_CTRL_LINES, +}; + +enum phy_mdm6600_bootmode_lines { + PHY_MDM6600_MODE0, /* out USB mode0 and OOB wake */ + PHY_MDM6600_MODE1, /* out USB mode1, in OOB wake */ + PHY_MDM6600_NR_MODE_LINES, +}; + +enum phy_mdm6600_cmd_lines { + PHY_MDM6600_CMD0, + PHY_MDM6600_CMD1, + PHY_MDM6600_CMD2, + PHY_MDM6600_NR_CMD_LINES, +}; + +enum phy_mdm6600_status_lines { + PHY_MDM6600_STATUS0, + PHY_MDM6600_STATUS1, + PHY_MDM6600_STATUS2, + PHY_MDM6600_NR_STATUS_LINES, +}; + +/* + * MDM6600 command codes. These are based on Motorola Mapphone Linux + * kernel tree. + */ +enum phy_mdm6600_cmd { + PHY_MDM6600_CMD_BP_PANIC_ACK, + PHY_MDM6600_CMD_DATA_ONLY_BYPASS, /* Reroute USB to CPCAP PHY */ + PHY_MDM6600_CMD_FULL_BYPASS, /* Reroute USB to CPCAP PHY */ + PHY_MDM6600_CMD_NO_BYPASS, /* Request normal USB mode */ + PHY_MDM6600_CMD_BP_SHUTDOWN_REQ, /* Request device power off */ + PHY_MDM6600_CMD_BP_UNKNOWN_5, + PHY_MDM6600_CMD_BP_UNKNOWN_6, + PHY_MDM6600_CMD_UNDEFINED, +}; + +/* + * MDM6600 status codes. These are based on Motorola Mapphone Linux + * kernel tree. + */ +enum phy_mdm6600_status { + PHY_MDM6600_STATUS_PANIC, /* Seems to be really off */ + PHY_MDM6600_STATUS_PANIC_BUSY_WAIT, + PHY_MDM6600_STATUS_QC_DLOAD, + PHY_MDM6600_STATUS_RAM_DOWNLOADER, /* MDM6600 USB flashing mode */ + PHY_MDM6600_STATUS_PHONE_CODE_AWAKE, /* MDM6600 normal USB mode */ + PHY_MDM6600_STATUS_PHONE_CODE_ASLEEP, + PHY_MDM6600_STATUS_SHUTDOWN_ACK, + PHY_MDM6600_STATUS_UNDEFINED, +}; + +static const char * const +phy_mdm6600_status_name[] = { + "off", "busy", "qc_dl", "ram_dl", "awake", + "asleep", "shutdown", "undefined", +}; + +struct phy_mdm6600 { + struct device *dev; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct gpio_desc *ctrl_gpios[PHY_MDM6600_NR_CTRL_LINES]; + struct gpio_descs *mode_gpios; + struct gpio_descs *status_gpios; + struct gpio_descs *cmd_gpios; + struct delayed_work bootup_work; + struct delayed_work status_work; + struct completion ack; + bool enabled; /* mdm6600 phy enabled */ + bool running; /* mdm6600 boot done */ + int status; +}; + +static int phy_mdm6600_init(struct phy *x) +{ + struct phy_mdm6600 *ddata = phy_get_drvdata(x); + struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; + + if (!ddata->enabled) + return -EPROBE_DEFER; + + gpiod_set_value_cansleep(enable_gpio, 0); + + return 0; +} + +static int phy_mdm6600_power_on(struct phy *x) +{ + struct phy_mdm6600 *ddata = phy_get_drvdata(x); + struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; + + if (!ddata->enabled) + return -ENODEV; + + gpiod_set_value_cansleep(enable_gpio, 1); + + return 0; +} + +static int phy_mdm6600_power_off(struct phy *x) +{ + struct phy_mdm6600 *ddata = phy_get_drvdata(x); + struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; + + if (!ddata->enabled) + return -ENODEV; + + gpiod_set_value_cansleep(enable_gpio, 0); + + return 0; +} + +static const struct phy_ops gpio_usb_ops = { + .init = phy_mdm6600_init, + .power_on = phy_mdm6600_power_on, + .power_off = phy_mdm6600_power_off, + .owner = THIS_MODULE, +}; + +/** + * phy_mdm6600_cmd() - send a command request to mdm6600 + * @ddata: device driver data + * + * Configures the three command request GPIOs to the specified value. + */ +static void phy_mdm6600_cmd(struct phy_mdm6600 *ddata, int val) +{ + int values[PHY_MDM6600_NR_CMD_LINES]; + int i; + + val &= (1 << PHY_MDM6600_NR_CMD_LINES) - 1; + for (i = 0; i < PHY_MDM6600_NR_CMD_LINES; i++) + values[i] = (val & BIT(i)) >> i; + + gpiod_set_array_value_cansleep(PHY_MDM6600_NR_CMD_LINES, + ddata->cmd_gpios->desc, values); +} + +/** + * phy_mdm6600_status() - read mdm6600 status lines + * @ddata: device driver data + */ +static void phy_mdm6600_status(struct work_struct *work) +{ + struct phy_mdm6600 *ddata; + struct device *dev; + int values[PHY_MDM6600_NR_STATUS_LINES]; + int error, i, val = 0; + + ddata = container_of(work, struct phy_mdm6600, status_work.work); + dev = ddata->dev; + + error = gpiod_get_array_value_cansleep(PHY_MDM6600_NR_CMD_LINES, + ddata->status_gpios->desc, + values); + if (error) + return; + + for (i = 0; i < PHY_MDM6600_NR_CMD_LINES; i++) { + val |= values[i] << i; + dev_dbg(ddata->dev, "XXX %s: i: %i values[i]: %i val: %i\n", + __func__, i, values[i], val); + } + ddata->status = val; + + dev_info(dev, "modem status: %i %s\n", + ddata->status, + phy_mdm6600_status_name[ddata->status & 7]); + complete(&ddata->ack); +} + +static irqreturn_t phy_mdm6600_irq_thread(int irq, void *data) +{ + struct phy_mdm6600 *ddata = data; + + schedule_delayed_work(&ddata->status_work, msecs_to_jiffies(10)); + + return IRQ_HANDLED; +} + +/** + * phy_mdm6600_wakeirq_thread - handle mode1 line OOB wake after booting + * @irq: interrupt + * @data: interrupt handler data + * + * GPIO mode1 is used initially as output to configure the USB boot + * mode for mdm6600. After booting it is used as input for OOB wake + * signal from mdm6600 to the SoC. Just use it for debug info only + * for now. + */ +static irqreturn_t phy_mdm6600_wakeirq_thread(int irq, void *data) +{ + struct phy_mdm6600 *ddata = data; + struct gpio_desc *mode_gpio1; + + mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1]; + dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", + gpiod_get_value(mode_gpio1)); + + return IRQ_HANDLED; +} + +/** + * phy_mdm6600_init_irq() - initialize mdm6600 status IRQ lines + * @ddata: device driver data + */ +static void phy_mdm6600_init_irq(struct phy_mdm6600 *ddata) +{ + struct device *dev = ddata->dev; + int i, error, irq; + + for (i = PHY_MDM6600_STATUS0; + i <= PHY_MDM6600_STATUS2; i++) { + struct gpio_desc *gpio = ddata->status_gpios->desc[i]; + + irq = gpiod_to_irq(gpio); + if (irq <= 0) + continue; + + error = devm_request_threaded_irq(dev, irq, NULL, + phy_mdm6600_irq_thread, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "mdm6600", + ddata); + if (error) + dev_warn(dev, "no modem status irq%i: %i\n", + irq, error); + } +} + +struct phy_mdm6600_map { + const char *name; + int direction; +}; + +static const struct phy_mdm6600_map +phy_mdm6600_ctrl_gpio_map[PHY_MDM6600_NR_CTRL_LINES] = { + { "enable", GPIOD_OUT_LOW, }, /* low = phy disabled */ + { "power", GPIOD_OUT_LOW, }, /* low = off */ + { "reset", GPIOD_OUT_HIGH, }, /* high = reset */ +}; + +/** + * phy_mdm6600_init_lines() - initialize mdm6600 GPIO lines + * @ddata: device driver data + */ +static int phy_mdm6600_init_lines(struct phy_mdm6600 *ddata) +{ + struct device *dev = ddata->dev; + int i; + + /* MDM6600 control lines */ + for (i = 0; i < ARRAY_SIZE(phy_mdm6600_ctrl_gpio_map); i++) { + const struct phy_mdm6600_map *map = + &phy_mdm6600_ctrl_gpio_map[i]; + struct gpio_desc **gpio = &ddata->ctrl_gpios[i]; + + *gpio = devm_gpiod_get(dev, map->name, map->direction); + if (IS_ERR(*gpio)) { + dev_info(dev, "gpio %s error %li\n", + map->name, PTR_ERR(*gpio)); + return PTR_ERR(*gpio); + } + } + + /* MDM6600 USB start-up mode output lines */ + ddata->mode_gpios = devm_gpiod_get_array(dev, "motorola,mode", + GPIOD_OUT_LOW); + if (IS_ERR(ddata->mode_gpios)) + return PTR_ERR(ddata->mode_gpios); + + if (ddata->mode_gpios->ndescs != PHY_MDM6600_NR_MODE_LINES) + return -EINVAL; + + /* MDM6600 status input lines */ + ddata->status_gpios = devm_gpiod_get_array(dev, "motorola,status", + GPIOD_IN); + if (IS_ERR(ddata->status_gpios)) + return PTR_ERR(ddata->status_gpios); + + if (ddata->status_gpios->ndescs != PHY_MDM6600_NR_STATUS_LINES) + return -EINVAL; + + /* MDM6600 cmd output lines */ + ddata->cmd_gpios = devm_gpiod_get_array(dev, "motorola,cmd", + GPIOD_OUT_LOW); + if (IS_ERR(ddata->cmd_gpios)) + return PTR_ERR(ddata->cmd_gpios); + + if (ddata->cmd_gpios->ndescs != PHY_MDM6600_NR_CMD_LINES) + return -EINVAL; + + return 0; +} + +/** + * phy_mdm6600_device_power_on() - power on mdm6600 device + * @ddata: device driver data + * + * To get the integrated USB phy in MDM6600 takes some hoops. We must ensure + * the shared USB bootmode GPIOs are configured, then request modem start-up, + * reset and power-up.. And then we need to recycle the shared USB bootmode + * GPIOs as they are also used for Out of Band (OOB) wake for the USB and + * TS 27.010 serial mux. + */ +static int phy_mdm6600_device_power_on(struct phy_mdm6600 *ddata) +{ + struct gpio_desc *mode_gpio0, *mode_gpio1, *reset_gpio, *power_gpio; + int error = 0, wakeirq; + + mode_gpio0 = ddata->mode_gpios->desc[PHY_MDM6600_MODE0]; + mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1]; + reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + power_gpio = ddata->ctrl_gpios[PHY_MDM6600_POWER]; + + /* + * Shared GPIOs must be low for normal USB mode. After booting + * they are used for OOB wake signaling. These can be also used + * to configure USB flashing mode later on based on a module + * parameter. + */ + gpiod_set_value_cansleep(mode_gpio0, 0); + gpiod_set_value_cansleep(mode_gpio1, 0); + + /* Request start-up mode */ + phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_NO_BYPASS); + + /* Request a reset first */ + gpiod_set_value_cansleep(reset_gpio, 0); + msleep(100); + + /* Toggle power GPIO to request mdm6600 to start */ + gpiod_set_value_cansleep(power_gpio, 1); + msleep(100); + gpiod_set_value_cansleep(power_gpio, 0); + + /* + * Looks like the USB PHY needs between 2.2 to 4 seconds. + * If we try to use it before that, we will get L3 errors + * from omap-usb-host trying to access the PHY. See also + * phy_mdm6600_init() for -EPROBE_DEFER. + */ + msleep(PHY_MDM6600_PHY_DELAY_MS); + ddata->enabled = true; + + /* Booting up the rest of MDM6600 will take total about 8 seconds */ + dev_info(ddata->dev, "Waiting for power up request to complete..\n"); + if (wait_for_completion_timeout(&ddata->ack, + msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS))) { + if (ddata->status > PHY_MDM6600_STATUS_PANIC && + ddata->status < PHY_MDM6600_STATUS_SHUTDOWN_ACK) + dev_info(ddata->dev, "Powered up OK\n"); + } else { + ddata->enabled = false; + error = -ETIMEDOUT; + dev_err(ddata->dev, "Timed out powering up\n"); + } + + /* Reconfigure mode1 GPIO as input for OOB wake */ + gpiod_direction_input(mode_gpio1); + + wakeirq = gpiod_to_irq(mode_gpio1); + if (wakeirq <= 0) + return wakeirq; + + error = devm_request_threaded_irq(ddata->dev, wakeirq, NULL, + phy_mdm6600_wakeirq_thread, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "mdm6600-wake", + ddata); + if (error) + dev_warn(ddata->dev, "no modem wakeirq irq%i: %i\n", + wakeirq, error); + + ddata->running = true; + + return error; +} + +/** + * phy_mdm6600_device_power_off() - power off mdm6600 device + * @ddata: device driver data + */ +static void phy_mdm6600_device_power_off(struct phy_mdm6600 *ddata) +{ + struct gpio_desc *reset_gpio = + ddata->ctrl_gpios[PHY_MDM6600_RESET]; + + ddata->enabled = false; + phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_BP_SHUTDOWN_REQ); + msleep(100); + + gpiod_set_value_cansleep(reset_gpio, 1); + + dev_info(ddata->dev, "Waiting for power down request to complete.. "); + if (wait_for_completion_timeout(&ddata->ack, + msecs_to_jiffies(5000))) { + if (ddata->status == PHY_MDM6600_STATUS_PANIC) + dev_info(ddata->dev, "Powered down OK\n"); + } else { + dev_err(ddata->dev, "Timed out powering down\n"); + } +} + +static void phy_mdm6600_deferred_power_on(struct work_struct *work) +{ + struct phy_mdm6600 *ddata; + int error; + + ddata = container_of(work, struct phy_mdm6600, bootup_work.work); + + error = phy_mdm6600_device_power_on(ddata); + if (error) + dev_err(ddata->dev, "Device not functional\n"); +} + +static const struct of_device_id phy_mdm6600_id_table[] = { + { .compatible = "motorola,mapphone-mdm6600", }, + {}, +}; +MODULE_DEVICE_TABLE(of, phy_mdm6600_id_table); + +static int phy_mdm6600_probe(struct platform_device *pdev) +{ + struct phy_mdm6600 *ddata; + int error; + + ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + INIT_DELAYED_WORK(&ddata->bootup_work, + phy_mdm6600_deferred_power_on); + INIT_DELAYED_WORK(&ddata->status_work, phy_mdm6600_status); + init_completion(&ddata->ack); + + ddata->dev = &pdev->dev; + platform_set_drvdata(pdev, ddata); + + error = phy_mdm6600_init_lines(ddata); + if (error) + return error; + + phy_mdm6600_init_irq(ddata); + + ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops); + if (IS_ERR(ddata->generic_phy)) { + error = PTR_ERR(ddata->generic_phy); + goto cleanup; + } + + phy_set_drvdata(ddata->generic_phy, ddata); + + ddata->phy_provider = + devm_of_phy_provider_register(ddata->dev, + of_phy_simple_xlate); + if (IS_ERR(ddata->phy_provider)) { + error = PTR_ERR(ddata->phy_provider); + goto cleanup; + } + + schedule_delayed_work(&ddata->bootup_work, 0); + + /* + * See phy_mdm6600_device_power_on(). We should be able + * to remove this eventually when ohci-platform can deal + * with -EPROBE_DEFER. + */ + msleep(PHY_MDM6600_PHY_DELAY_MS + 500); + + return 0; + +cleanup: + phy_mdm6600_device_power_off(ddata); + return error; +} + +static int phy_mdm6600_remove(struct platform_device *pdev) +{ + struct phy_mdm6600 *ddata = platform_get_drvdata(pdev); + struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + + if (!ddata->running) + wait_for_completion_timeout(&ddata->ack, + msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS)); + + gpiod_set_value_cansleep(reset_gpio, 1); + phy_mdm6600_device_power_off(ddata); + + cancel_delayed_work_sync(&ddata->bootup_work); + cancel_delayed_work_sync(&ddata->status_work); + + return 0; +} + +static struct platform_driver phy_mdm6600_driver = { + .probe = phy_mdm6600_probe, + .remove = phy_mdm6600_remove, + .driver = { + .name = "phy-mapphone-mdm6600", + .of_match_table = of_match_ptr(phy_mdm6600_id_table), + }, +}; + +module_platform_driver(phy_mdm6600_driver); + +MODULE_ALIAS("platform:gpio_usb"); +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); +MODULE_DESCRIPTION("mdm6600 gpio usb phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 8f6e8e28996d..09ac8afb97ac 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -351,6 +351,8 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode) mutex_lock(&phy->mutex); ret = phy->ops->set_mode(phy, mode); + if (!ret) + phy->attrs.mode = mode; mutex_unlock(&phy->mutex); return ret; diff --git a/drivers/phy/phy-lpc18xx-usb-otg.c b/drivers/phy/phy-lpc18xx-usb-otg.c index 3b7a71eb5b7e..7de280a45421 100644 --- a/drivers/phy/phy-lpc18xx-usb-otg.c +++ b/drivers/phy/phy-lpc18xx-usb-otg.c @@ -60,8 +60,14 @@ static int lpc18xx_usb_otg_phy_power_on(struct phy *phy) return ret; /* The bit in CREG is cleared to enable the PHY */ - return regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0, + ret = regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0, LPC18XX_CREG_CREG0_USB0PHY, 0); + if (ret) { + clk_disable(lpc->clk); + return ret; + } + + return 0; } static int lpc18xx_usb_otg_phy_power_off(struct phy *phy) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e17f0351ccc2..6470c5d61d1c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/clk.h> @@ -31,124 +22,7 @@ #include <dt-bindings/phy/phy.h> -/* QMP PHY QSERDES COM registers */ -#define QSERDES_COM_BG_TIMER 0x00c -#define QSERDES_COM_SSC_EN_CENTER 0x010 -#define QSERDES_COM_SSC_ADJ_PER1 0x014 -#define QSERDES_COM_SSC_ADJ_PER2 0x018 -#define QSERDES_COM_SSC_PER1 0x01c -#define QSERDES_COM_SSC_PER2 0x020 -#define QSERDES_COM_SSC_STEP_SIZE1 0x024 -#define QSERDES_COM_SSC_STEP_SIZE2 0x028 -#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034 -#define QSERDES_COM_CLK_ENABLE1 0x038 -#define QSERDES_COM_SYS_CLK_CTRL 0x03c -#define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040 -#define QSERDES_COM_PLL_IVCO 0x048 -#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c -#define QSERDES_COM_LOCK_CMP2_MODE0 0x050 -#define QSERDES_COM_LOCK_CMP3_MODE0 0x054 -#define QSERDES_COM_LOCK_CMP1_MODE1 0x058 -#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c -#define QSERDES_COM_LOCK_CMP3_MODE1 0x060 -#define QSERDES_COM_BG_TRIM 0x070 -#define QSERDES_COM_CLK_EP_DIV 0x074 -#define QSERDES_COM_CP_CTRL_MODE0 0x078 -#define QSERDES_COM_CP_CTRL_MODE1 0x07c -#define QSERDES_COM_PLL_RCTRL_MODE0 0x084 -#define QSERDES_COM_PLL_RCTRL_MODE1 0x088 -#define QSERDES_COM_PLL_CCTRL_MODE0 0x090 -#define QSERDES_COM_PLL_CCTRL_MODE1 0x094 -#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8 -#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac -#define QSERDES_COM_RESETSM_CNTRL 0x0b4 -#define QSERDES_COM_RESTRIM_CTRL 0x0bc -#define QSERDES_COM_RESCODE_DIV_NUM 0x0c4 -#define QSERDES_COM_LOCK_CMP_EN 0x0c8 -#define QSERDES_COM_LOCK_CMP_CFG 0x0cc -#define QSERDES_COM_DEC_START_MODE0 0x0d0 -#define QSERDES_COM_DEC_START_MODE1 0x0d4 -#define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc -#define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0 -#define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4 -#define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8 -#define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec -#define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0 -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108 -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110 -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114 -#define QSERDES_COM_VCO_TUNE_CTRL 0x124 -#define QSERDES_COM_VCO_TUNE_MAP 0x128 -#define QSERDES_COM_VCO_TUNE1_MODE0 0x12c -#define QSERDES_COM_VCO_TUNE2_MODE0 0x130 -#define QSERDES_COM_VCO_TUNE1_MODE1 0x134 -#define QSERDES_COM_VCO_TUNE2_MODE1 0x138 -#define QSERDES_COM_VCO_TUNE_TIMER1 0x144 -#define QSERDES_COM_VCO_TUNE_TIMER2 0x148 -#define QSERDES_COM_BG_CTRL 0x170 -#define QSERDES_COM_CLK_SELECT 0x174 -#define QSERDES_COM_HSCLK_SEL 0x178 -#define QSERDES_COM_CORECLK_DIV 0x184 -#define QSERDES_COM_CORE_CLK_EN 0x18c -#define QSERDES_COM_C_READY_STATUS 0x190 -#define QSERDES_COM_CMN_CONFIG 0x194 -#define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c -#define QSERDES_COM_DEBUG_BUS0 0x1a0 -#define QSERDES_COM_DEBUG_BUS1 0x1a4 -#define QSERDES_COM_DEBUG_BUS2 0x1a8 -#define QSERDES_COM_DEBUG_BUS3 0x1ac -#define QSERDES_COM_DEBUG_BUS_SEL 0x1b0 -#define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc - -/* QMP PHY TX registers */ -#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 -#define QSERDES_TX_DEBUG_BUS_SEL 0x064 -#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 -#define QSERDES_TX_LANE_MODE 0x094 -#define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac - -/* QMP PHY RX registers */ -#define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010 -#define QSERDES_RX_UCDR_SO_GAIN 0x01c -#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040 -#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048 -#define QSERDES_RX_RX_TERM_BW 0x090 -#define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4 -#define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8 -#define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc -#define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0 -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8 -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0 -#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108 -#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c -#define QSERDES_RX_SIGDET_ENABLES 0x110 -#define QSERDES_RX_SIGDET_CNTRL 0x114 -#define QSERDES_RX_SIGDET_LVL 0x118 -#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c -#define QSERDES_RX_RX_BAND 0x120 -#define QSERDES_RX_RX_INTERFACE_MODE 0x12c - -/* QMP PHY PCS registers */ -#define QPHY_POWER_DOWN_CONTROL 0x04 -#define QPHY_TXDEEMPH_M6DB_V0 0x24 -#define QPHY_TXDEEMPH_M3P5DB_V0 0x28 -#define QPHY_ENDPOINT_REFCLK_DRIVE 0x54 -#define QPHY_RX_IDLE_DTCT_CNTRL 0x58 -#define QPHY_POWER_STATE_CONFIG1 0x60 -#define QPHY_POWER_STATE_CONFIG2 0x64 -#define QPHY_POWER_STATE_CONFIG4 0x6c -#define QPHY_LOCK_DETECT_CONFIG1 0x80 -#define QPHY_LOCK_DETECT_CONFIG2 0x84 -#define QPHY_LOCK_DETECT_CONFIG3 0x88 -#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0 -#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4 -#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8 -#define QPHY_OSC_DTCT_ACTIONS 0x1AC -#define QPHY_RX_SIGDET_LVL 0x1D8 -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0 +#include "phy-qcom-qmp.h" /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) @@ -164,6 +38,34 @@ /* QPHY_COM_PCS_READY_STATUS bit */ #define PCS_READY BIT(0) +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */ +/* DP PHY soft reset */ +#define SW_DPPHY_RESET BIT(0) +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */ +#define SW_DPPHY_RESET_MUX BIT(1) +/* USB3 PHY soft reset */ +#define SW_USB3PHY_RESET BIT(2) +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */ +#define SW_USB3PHY_RESET_MUX BIT(3) + +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */ +#define USB3_MODE BIT(0) /* enables USB3 mode */ +#define DP_MODE BIT(1) /* enables DP mode */ + +/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */ +#define ARCVR_DTCT_EN BIT(0) +#define ALFPS_DTCT_EN BIT(1) +#define ARCVR_DTCT_EVENT_SEL BIT(4) + +/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */ +#define IRQ_CLEAR BIT(0) + +/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */ +#define RCVR_DETECT BIT(0) + +/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */ +#define CLAMP_EN BIT(0) /* enables i/o clamp_n */ + #define PHY_INIT_COMPLETE_TIMEOUT 1000 #define POWER_DOWN_DELAY_US_MIN 10 #define POWER_DOWN_DELAY_US_MAX 11 @@ -210,6 +112,9 @@ enum qphy_reg_layout { QPHY_SW_RESET, QPHY_START_CTRL, QPHY_PCS_READY_STATUS, + QPHY_PCS_AUTONOMOUS_MODE_CTRL, + QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR, + QPHY_PCS_LFPS_RXTERM_IRQ_STATUS, }; static const unsigned int pciephy_regs_layout[] = { @@ -237,6 +142,18 @@ static const unsigned int usb3phy_regs_layout[] = { [QPHY_SW_RESET] = 0x00, [QPHY_START_CTRL] = 0x08, [QPHY_PCS_READY_STATUS] = 0x17c, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8, + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178, +}; + +static const unsigned int qmp_v3_usb3phy_regs_layout[] = { + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x08, + [QPHY_PCS_READY_STATUS] = 0x174, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc, + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, }; static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { @@ -467,6 +384,112 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3), }; +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { + /* FLL settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), + + /* Lock Det settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), +}; + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -511,6 +534,12 @@ struct qmp_phy_cfg { /* power_down delay in usec */ int pwrdn_delay_min; int pwrdn_delay_max; + + /* true, if PHY has a separate DP_COM control block */ + bool has_phy_dp_com_ctrl; + /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ + unsigned int tx_b_lane_offset; + unsigned int rx_b_lane_offset; }; /** @@ -520,6 +549,7 @@ struct qmp_phy_cfg { * @tx: iomapped memory space for lane's tx * @rx: iomapped memory space for lane's rx * @pcs: iomapped memory space for lane's pcs + * @pcs_misc: iomapped memory space for lane's pcs_misc * @pipe_clk: pipe lock * @index: lane index * @qmp: QMP phy to which this lane belongs @@ -530,6 +560,7 @@ struct qmp_phy { void __iomem *tx; void __iomem *rx; void __iomem *pcs; + void __iomem *pcs_misc; struct clk *pipe_clk; unsigned int index; struct qcom_qmp *qmp; @@ -541,6 +572,7 @@ struct qmp_phy { * * @dev: device * @serdes: iomapped memory space for phy's serdes + * @dp_com: iomapped memory space for phy's dp_com control block * * @clks: array of clocks required by phy * @resets: array of resets required by phy @@ -550,12 +582,15 @@ struct qmp_phy { * @phys: array of per-lane phy descriptors * @phy_mutex: mutex lock for PHY common block initialization * @init_count: phy common block initialization count + * @phy_initialized: indicate if PHY has been initialized + * @mode: current PHY mode */ struct qcom_qmp { struct device *dev; void __iomem *serdes; + void __iomem *dp_com; - struct clk **clks; + struct clk_bulk_data *clks; struct reset_control **resets; struct regulator_bulk_data *vregs; @@ -564,6 +599,8 @@ struct qcom_qmp { struct mutex phy_mutex; int init_count; + bool phy_initialized; + enum phy_mode mode; }; static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) @@ -595,6 +632,10 @@ static const char * const msm8996_phy_clk_l[] = { "aux", "cfg_ahb", "ref", }; +static const char * const qmp_v3_phy_clk_l[] = { + "aux", "cfg_ahb", "ref", "com_aux", +}; + /* list of resets */ static const char * const msm8996_pciephy_reset_l[] = { "phy", "common", "cfg", @@ -701,6 +742,38 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .pwrdn_delay_max = 1005, /* us */ }; +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = qmp_v3_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), + .tx_tbl = qmp_v3_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl), + .rx_tbl = qmp_v3_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl), + .pcs_tbl = qmp_v3_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl), + .clk_list = qmp_v3_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = msm8996_phy_vreg_l, + .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .regs = qmp_v3_usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PHYSTATUS, + + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, + + .has_phy_dp_com_ctrl = true, + .tx_b_lane_offset = 0x400, + .rx_b_lane_offset = 0x400, +}; + static void qcom_qmp_phy_configure(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -724,44 +797,20 @@ static int qcom_qmp_phy_poweron(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; - int num = qmp->cfg->num_vregs; int ret; - dev_vdbg(&phy->dev, "Powering on QMP phy\n"); - - /* turn on regulator supplies */ - ret = regulator_bulk_enable(num, qmp->vregs); - if (ret) { - dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret); - return ret; - } - ret = clk_prepare_enable(qphy->pipe_clk); - if (ret) { + if (ret) dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret); - regulator_bulk_disable(num, qmp->vregs); - return ret; - } - return 0; -} - -static int qcom_qmp_phy_poweroff(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - - clk_disable_unprepare(qphy->pipe_clk); - - regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs); - - return 0; + return ret; } static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *serdes = qmp->serdes; + void __iomem *dp_com = qmp->dp_com; int ret, i; mutex_lock(&qmp->phy_mutex); @@ -770,7 +819,23 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) return 0; } + /* turn on regulator supplies */ + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs); + if (ret) { + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret); + goto err_reg_enable; + } + for (i = 0; i < cfg->num_resets; i++) { + ret = reset_control_assert(qmp->resets[i]); + if (ret) { + dev_err(qmp->dev, "%s reset assert failed\n", + cfg->reset_list[i]); + goto err_rst_assert; + } + } + + for (i = cfg->num_resets - 1; i >= 0; i--) { ret = reset_control_deassert(qmp->resets[i]); if (ret) { dev_err(qmp->dev, "%s reset deassert failed\n", @@ -779,10 +844,33 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) } } + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); + if (ret) { + dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret); + goto err_rst; + } + if (cfg->has_phy_com_ctrl) qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], SW_PWRDN); + if (cfg->has_phy_dp_com_ctrl) { + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL, + SW_PWRDN); + /* override hardware control for reset of qmp phy */ + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL, + USB3_MODE | DP_MODE); + + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */ + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + } + /* Serdes configuration */ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl, cfg->serdes_tbl_num); @@ -803,7 +891,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) if (ret) { dev_err(qmp->dev, "phy common block init timed-out\n"); - goto err_rst; + goto err_com_init; } } @@ -811,9 +899,14 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) return 0; +err_com_init: + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); err_rst: - while (--i >= 0) + while (++i < cfg->num_resets) reset_control_assert(qmp->resets[i]); +err_rst_assert: + regulator_bulk_disable(cfg->num_vregs, qmp->vregs); +err_reg_enable: mutex_unlock(&qmp->phy_mutex); return ret; @@ -843,6 +936,10 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) while (--i >= 0) reset_control_assert(qmp->resets[i]); + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); + + regulator_bulk_disable(cfg->num_vregs, qmp->vregs); + mutex_unlock(&qmp->phy_mutex); return 0; @@ -857,24 +954,16 @@ static int qcom_qmp_phy_init(struct phy *phy) void __iomem *tx = qphy->tx; void __iomem *rx = qphy->rx; void __iomem *pcs = qphy->pcs; + void __iomem *dp_com = qmp->dp_com; void __iomem *status; unsigned int mask, val; - int ret, i; + int ret; dev_vdbg(qmp->dev, "Initializing QMP phy\n"); - for (i = 0; i < qmp->cfg->num_clks; i++) { - ret = clk_prepare_enable(qmp->clks[i]); - if (ret) { - dev_err(qmp->dev, "failed to enable %s clk, err=%d\n", - qmp->cfg->clk_list[i], ret); - goto err_clk; - } - } - ret = qcom_qmp_phy_com_init(qmp); if (ret) - goto err_clk; + return ret; if (cfg->has_lane_rst) { ret = reset_control_deassert(qphy->lane_rst); @@ -887,7 +976,16 @@ static int qcom_qmp_phy_init(struct phy *phy) /* Tx, Rx, and PCS configurations */ qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); + /* Configuration for other LANE for USB-DP combo PHY */ + if (cfg->has_phy_dp_com_ctrl) + qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs, + cfg->tx_tbl, cfg->tx_tbl_num); + qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); + if (cfg->has_phy_dp_com_ctrl) + qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs, + cfg->rx_tbl, cfg->rx_tbl_num); + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); /* @@ -899,11 +997,13 @@ static int qcom_qmp_phy_init(struct phy *phy) if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); - /* start SerDes and Phy-Coding-Sublayer */ - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - /* Pull PHY out of reset state */ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (cfg->has_phy_dp_com_ctrl) + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); + + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; mask = cfg->mask_pcs_ready; @@ -914,6 +1014,7 @@ static int qcom_qmp_phy_init(struct phy *phy) dev_err(qmp->dev, "phy initialization timed-out\n"); goto err_pcs_ready; } + qmp->phy_initialized = true; return ret; @@ -922,9 +1023,6 @@ err_pcs_ready: reset_control_assert(qphy->lane_rst); err_lane_rst: qcom_qmp_phy_com_exit(qmp); -err_clk: - while (--i >= 0) - clk_disable_unprepare(qmp->clks[i]); return ret; } @@ -934,7 +1032,8 @@ static int qcom_qmp_phy_exit(struct phy *phy) struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; const struct qmp_phy_cfg *cfg = qmp->cfg; - int i = cfg->num_clks; + + clk_disable_unprepare(qphy->pipe_clk); /* PHY reset */ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); @@ -950,8 +1049,127 @@ static int qcom_qmp_phy_exit(struct phy *phy) qcom_qmp_phy_com_exit(qmp); - while (--i >= 0) - clk_disable_unprepare(qmp->clks[i]); + qmp->phy_initialized = false; + + return 0; +} + +static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + + qmp->mode = mode; + + return 0; +} + +static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy) +{ + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *pcs = qphy->pcs; + void __iomem *pcs_misc = qphy->pcs_misc; + u32 intr_mask; + + if (qmp->mode == PHY_MODE_USB_HOST_SS || + qmp->mode == PHY_MODE_USB_DEVICE_SS) + intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN; + else + intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL; + + /* Clear any pending interrupts status */ + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); + /* Writing 1 followed by 0 clears the interrupt */ + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); + + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], + ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL); + + /* Enable required PHY autonomous mode interrupts */ + qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask); + + /* Enable i/o clamp_n for autonomous mode */ + if (pcs_misc) + qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN); +} + +static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy) +{ + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *pcs = qphy->pcs; + void __iomem *pcs_misc = qphy->pcs_misc; + + /* Disable i/o clamp_n on resume for normal mode */ + if (pcs_misc) + qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN); + + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], + ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN); + + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); + /* Writing 1 followed by 0 clears the interrupt */ + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); +} + +static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + struct qmp_phy *qphy = qmp->phys[0]; + const struct qmp_phy_cfg *cfg = qmp->cfg; + + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode); + + /* Supported only for USB3 PHY */ + if (cfg->type != PHY_TYPE_USB3) + return 0; + + if (!qmp->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } + + qcom_qmp_phy_enable_autonomous_mode(qphy); + + clk_disable_unprepare(qphy->pipe_clk); + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); + + return 0; +} + +static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + struct qmp_phy *qphy = qmp->phys[0]; + const struct qmp_phy_cfg *cfg = qmp->cfg; + int ret = 0; + + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode); + + /* Supported only for USB3 PHY */ + if (cfg->type != PHY_TYPE_USB3) + return 0; + + if (!qmp->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } + + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); + if (ret) { + dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret); + return ret; + } + + ret = clk_prepare_enable(qphy->pipe_clk); + if (ret) { + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret); + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); + return ret; + } + + qcom_qmp_phy_disable_autonomous_mode(qphy); return 0; } @@ -1000,29 +1218,17 @@ static int qcom_qmp_phy_reset_init(struct device *dev) static int qcom_qmp_phy_clk_init(struct device *dev) { struct qcom_qmp *qmp = dev_get_drvdata(dev); - int ret, i; + int num = qmp->cfg->num_clks; + int i; - qmp->clks = devm_kcalloc(dev, qmp->cfg->num_clks, - sizeof(*qmp->clks), GFP_KERNEL); + qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL); if (!qmp->clks) return -ENOMEM; - for (i = 0; i < qmp->cfg->num_clks; i++) { - struct clk *_clk; - const char *name = qmp->cfg->clk_list[i]; - - _clk = devm_clk_get(dev, name); - if (IS_ERR(_clk)) { - ret = PTR_ERR(_clk); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to get %s clk, %d\n", - name, ret); - return ret; - } - qmp->clks[i] = _clk; - } + for (i = 0; i < num; i++) + qmp->clks[i].id = qmp->cfg->clk_list[i]; - return 0; + return devm_clk_bulk_get(dev, num, qmp->clks); } /* @@ -1078,7 +1284,7 @@ static const struct phy_ops qcom_qmp_phy_gen_ops = { .init = qcom_qmp_phy_init, .exit = qcom_qmp_phy_exit, .power_on = qcom_qmp_phy_poweron, - .power_off = qcom_qmp_phy_poweroff, + .set_mode = qcom_qmp_phy_set_mode, .owner = THIS_MODULE, }; @@ -1097,7 +1303,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) /* * Get memory resources for each phy lane: - * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2; and + * pcs_misc (optional) -> 3. */ qphy->tx = of_iomap(np, 0); if (!qphy->tx) @@ -1111,6 +1318,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) if (!qphy->pcs) return -ENOMEM; + qphy->pcs_misc = of_iomap(np, 3); + if (!qphy->pcs_misc) + dev_vdbg(dev, "PHY pcs_misc-reg not used\n"); + /* * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3 * based phys, so they essentially have pipe clock. So, @@ -1169,11 +1380,19 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,ipq8074-qmp-pcie-phy", .data = &ipq8074_pciephy_cfg, + }, { + .compatible = "qcom,qmp-v3-usb3-phy", + .data = &qmp_v3_usb3phy_cfg, }, { }, }; MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table); +static const struct dev_pm_ops qcom_qmp_phy_pm_ops = { + SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend, + qcom_qmp_phy_runtime_resume, NULL) +}; + static int qcom_qmp_phy_probe(struct platform_device *pdev) { struct qcom_qmp *qmp; @@ -1192,6 +1411,11 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) qmp->dev = dev; dev_set_drvdata(dev, qmp); + /* Get the specific init parameters of QMP phy */ + qmp->cfg = of_device_get_match_data(dev); + if (!qmp->cfg) + return -EINVAL; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) @@ -1200,10 +1424,18 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) /* per PHY serdes; usually located at base address */ qmp->serdes = base; - mutex_init(&qmp->phy_mutex); + /* per PHY dp_com; if PHY has dp_com control block */ + if (qmp->cfg->has_phy_dp_com_ctrl) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "dp_com"); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); - /* Get the specific init parameters of QMP phy */ - qmp->cfg = of_device_get_match_data(dev); + qmp->dp_com = base; + } + + mutex_init(&qmp->phy_mutex); ret = qcom_qmp_phy_clk_init(dev); if (ret) @@ -1229,12 +1461,21 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) return -ENOMEM; id = 0; + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + /* + * Prevent runtime pm from being ON by default. Users can enable + * it using power/control in sysfs. + */ + pm_runtime_forbid(dev); + for_each_available_child_of_node(dev->of_node, child) { /* Create per-lane phy */ ret = qcom_qmp_phy_create(dev, child, id); if (ret) { dev_err(dev, "failed to create lane%d phy, %d\n", id, ret); + pm_runtime_disable(dev); return ret; } @@ -1246,6 +1487,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) if (ret) { dev_err(qmp->dev, "failed to register pipe clock source\n"); + pm_runtime_disable(dev); return ret; } id++; @@ -1254,6 +1496,8 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (!IS_ERR(phy_provider)) dev_info(dev, "Registered Qcom-QMP phy\n"); + else + pm_runtime_disable(dev); return PTR_ERR_OR_ZERO(phy_provider); } @@ -1262,6 +1506,7 @@ static struct platform_driver qcom_qmp_phy_driver = { .probe = qcom_qmp_phy_probe, .driver = { .name = "qcom-qmp-phy", + .pm = &qcom_qmp_phy_pm_ops, .of_match_table = qcom_qmp_phy_of_match_table, }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h new file mode 100644 index 000000000000..d1c6905d0439 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -0,0 +1,280 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_H_ +#define QCOM_PHY_QMP_H_ + +/* Only for QMP V2 PHY - QSERDES COM registers */ +#define QSERDES_COM_BG_TIMER 0x00c +#define QSERDES_COM_SSC_EN_CENTER 0x010 +#define QSERDES_COM_SSC_ADJ_PER1 0x014 +#define QSERDES_COM_SSC_ADJ_PER2 0x018 +#define QSERDES_COM_SSC_PER1 0x01c +#define QSERDES_COM_SSC_PER2 0x020 +#define QSERDES_COM_SSC_STEP_SIZE1 0x024 +#define QSERDES_COM_SSC_STEP_SIZE2 0x028 +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034 +#define QSERDES_COM_CLK_ENABLE1 0x038 +#define QSERDES_COM_SYS_CLK_CTRL 0x03c +#define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040 +#define QSERDES_COM_PLL_IVCO 0x048 +#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c +#define QSERDES_COM_LOCK_CMP2_MODE0 0x050 +#define QSERDES_COM_LOCK_CMP3_MODE0 0x054 +#define QSERDES_COM_LOCK_CMP1_MODE1 0x058 +#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c +#define QSERDES_COM_LOCK_CMP3_MODE1 0x060 +#define QSERDES_COM_BG_TRIM 0x070 +#define QSERDES_COM_CLK_EP_DIV 0x074 +#define QSERDES_COM_CP_CTRL_MODE0 0x078 +#define QSERDES_COM_CP_CTRL_MODE1 0x07c +#define QSERDES_COM_PLL_RCTRL_MODE0 0x084 +#define QSERDES_COM_PLL_RCTRL_MODE1 0x088 +#define QSERDES_COM_PLL_CCTRL_MODE0 0x090 +#define QSERDES_COM_PLL_CCTRL_MODE1 0x094 +#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8 +#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac +#define QSERDES_COM_RESETSM_CNTRL 0x0b4 +#define QSERDES_COM_RESTRIM_CTRL 0x0bc +#define QSERDES_COM_RESCODE_DIV_NUM 0x0c4 +#define QSERDES_COM_LOCK_CMP_EN 0x0c8 +#define QSERDES_COM_LOCK_CMP_CFG 0x0cc +#define QSERDES_COM_DEC_START_MODE0 0x0d0 +#define QSERDES_COM_DEC_START_MODE1 0x0d4 +#define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc +#define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0 +#define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4 +#define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8 +#define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec +#define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0 +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108 +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110 +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114 +#define QSERDES_COM_VCO_TUNE_CTRL 0x124 +#define QSERDES_COM_VCO_TUNE_MAP 0x128 +#define QSERDES_COM_VCO_TUNE1_MODE0 0x12c +#define QSERDES_COM_VCO_TUNE2_MODE0 0x130 +#define QSERDES_COM_VCO_TUNE1_MODE1 0x134 +#define QSERDES_COM_VCO_TUNE2_MODE1 0x138 +#define QSERDES_COM_VCO_TUNE_TIMER1 0x144 +#define QSERDES_COM_VCO_TUNE_TIMER2 0x148 +#define QSERDES_COM_BG_CTRL 0x170 +#define QSERDES_COM_CLK_SELECT 0x174 +#define QSERDES_COM_HSCLK_SEL 0x178 +#define QSERDES_COM_CORECLK_DIV 0x184 +#define QSERDES_COM_CORE_CLK_EN 0x18c +#define QSERDES_COM_C_READY_STATUS 0x190 +#define QSERDES_COM_CMN_CONFIG 0x194 +#define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c +#define QSERDES_COM_DEBUG_BUS0 0x1a0 +#define QSERDES_COM_DEBUG_BUS1 0x1a4 +#define QSERDES_COM_DEBUG_BUS2 0x1a8 +#define QSERDES_COM_DEBUG_BUS3 0x1ac +#define QSERDES_COM_DEBUG_BUS_SEL 0x1b0 +#define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc + +/* Only for QMP V2 PHY - TX registers */ +#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 +#define QSERDES_TX_DEBUG_BUS_SEL 0x064 +#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 +#define QSERDES_TX_LANE_MODE 0x094 +#define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac + +/* Only for QMP V2 PHY - RX registers */ +#define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010 +#define QSERDES_RX_UCDR_SO_GAIN 0x01c +#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040 +#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048 +#define QSERDES_RX_RX_TERM_BW 0x090 +#define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4 +#define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8 +#define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc +#define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0 +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8 +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0 +#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108 +#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c +#define QSERDES_RX_SIGDET_ENABLES 0x110 +#define QSERDES_RX_SIGDET_CNTRL 0x114 +#define QSERDES_RX_SIGDET_LVL 0x118 +#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c +#define QSERDES_RX_RX_BAND 0x120 +#define QSERDES_RX_RX_INTERFACE_MODE 0x12c + +/* Only for QMP V2 PHY - PCS registers */ +#define QPHY_POWER_DOWN_CONTROL 0x04 +#define QPHY_TXDEEMPH_M6DB_V0 0x24 +#define QPHY_TXDEEMPH_M3P5DB_V0 0x28 +#define QPHY_ENDPOINT_REFCLK_DRIVE 0x54 +#define QPHY_RX_IDLE_DTCT_CNTRL 0x58 +#define QPHY_POWER_STATE_CONFIG1 0x60 +#define QPHY_POWER_STATE_CONFIG2 0x64 +#define QPHY_POWER_STATE_CONFIG4 0x6c +#define QPHY_LOCK_DETECT_CONFIG1 0x80 +#define QPHY_LOCK_DETECT_CONFIG2 0x84 +#define QPHY_LOCK_DETECT_CONFIG3 0x88 +#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0 +#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4 +#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8 +#define QPHY_OSC_DTCT_ACTIONS 0x1AC +#define QPHY_RX_SIGDET_LVL 0x1D8 +#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC +#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0 + +/* Only for QMP V3 PHY - DP COM registers */ +#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00 +#define QPHY_V3_DP_COM_SW_RESET 0x04 +#define QPHY_V3_DP_COM_POWER_DOWN_CTRL 0x08 +#define QPHY_V3_DP_COM_SWI_CTRL 0x0c +#define QPHY_V3_DP_COM_TYPEC_CTRL 0x10 +#define QPHY_V3_DP_COM_TYPEC_PWRDN_CTRL 0x14 +#define QPHY_V3_DP_COM_RESET_OVRD_CTRL 0x1c + +/* Only for QMP V3 PHY - QSERDES COM registers */ +#define QSERDES_V3_COM_BG_TIMER 0x00c +#define QSERDES_V3_COM_SSC_EN_CENTER 0x010 +#define QSERDES_V3_COM_SSC_ADJ_PER1 0x014 +#define QSERDES_V3_COM_SSC_ADJ_PER2 0x018 +#define QSERDES_V3_COM_SSC_PER1 0x01c +#define QSERDES_V3_COM_SSC_PER2 0x020 +#define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024 +#define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028 +#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034 +#define QSERDES_V3_COM_CLK_ENABLE1 0x038 +#define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c +#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040 +#define QSERDES_V3_COM_PLL_IVCO 0x048 +#define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098 +#define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c +#define QSERDES_V3_COM_LOCK_CMP3_MODE0 0x0a0 +#define QSERDES_V3_COM_LOCK_CMP1_MODE1 0x0a4 +#define QSERDES_V3_COM_LOCK_CMP2_MODE1 0x0a8 +#define QSERDES_V3_COM_LOCK_CMP3_MODE1 0x0ac +#define QSERDES_V3_COM_CLK_EP_DIV 0x05c +#define QSERDES_V3_COM_CP_CTRL_MODE0 0x060 +#define QSERDES_V3_COM_CP_CTRL_MODE1 0x064 +#define QSERDES_V3_COM_PLL_RCTRL_MODE0 0x068 +#define QSERDES_V3_COM_PLL_RCTRL_MODE1 0x06c +#define QSERDES_V3_COM_PLL_CCTRL_MODE0 0x070 +#define QSERDES_V3_COM_PLL_CCTRL_MODE1 0x074 +#define QSERDES_V3_COM_SYSCLK_EN_SEL 0x080 +#define QSERDES_V3_COM_RESETSM_CNTRL 0x088 +#define QSERDES_V3_COM_RESETSM_CNTRL2 0x08c +#define QSERDES_V3_COM_LOCK_CMP_EN 0x090 +#define QSERDES_V3_COM_LOCK_CMP_CFG 0x094 +#define QSERDES_V3_COM_DEC_START_MODE0 0x0b0 +#define QSERDES_V3_COM_DEC_START_MODE1 0x0b4 +#define QSERDES_V3_COM_DIV_FRAC_START1_MODE0 0x0b8 +#define QSERDES_V3_COM_DIV_FRAC_START2_MODE0 0x0bc +#define QSERDES_V3_COM_DIV_FRAC_START3_MODE0 0x0c0 +#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1 0x0c4 +#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1 0x0c8 +#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1 0x0cc +#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0 0x0d8 +#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0 0x0dc +#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1 0x0e0 +#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1 0x0e4 +#define QSERDES_V3_COM_VCO_TUNE_CTRL 0x0ec +#define QSERDES_V3_COM_VCO_TUNE_MAP 0x0f0 +#define QSERDES_V3_COM_VCO_TUNE1_MODE0 0x0f4 +#define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8 +#define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc +#define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100 +#define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c +#define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120 +#define QSERDES_V3_COM_CLK_SELECT 0x138 +#define QSERDES_V3_COM_HSCLK_SEL 0x13c +#define QSERDES_V3_COM_CORECLK_DIV_MODE0 0x148 +#define QSERDES_V3_COM_CORECLK_DIV_MODE1 0x14c +#define QSERDES_V3_COM_CORE_CLK_EN 0x154 +#define QSERDES_V3_COM_C_READY_STATUS 0x158 +#define QSERDES_V3_COM_CMN_CONFIG 0x15c +#define QSERDES_V3_COM_SVS_MODE_CLK_SEL 0x164 +#define QSERDES_V3_COM_DEBUG_BUS0 0x168 +#define QSERDES_V3_COM_DEBUG_BUS1 0x16c +#define QSERDES_V3_COM_DEBUG_BUS2 0x170 +#define QSERDES_V3_COM_DEBUG_BUS3 0x174 +#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178 + +/* Only for QMP V3 PHY - TX registers */ +#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044 +#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX 0x048 +#define QSERDES_V3_TX_DEBUG_BUS_SEL 0x058 +#define QSERDES_V3_TX_HIGHZ_DRVR_EN 0x060 +#define QSERDES_V3_TX_LANE_MODE_1 0x08c +#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4 + +/* Only for QMP V3 PHY - RX registers */ +#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c +#define QSERDES_V3_RX_UCDR_SO_GAIN 0x014 +#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 +#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 +#define QSERDES_V3_RX_RX_TERM_BW 0x07c +#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8 +#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc +#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d4 +#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3 0x0d8 +#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4 0x0dc +#define QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x0f8 +#define QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x0fc +#define QSERDES_V3_RX_SIGDET_ENABLES 0x100 +#define QSERDES_V3_RX_SIGDET_CNTRL 0x104 +#define QSERDES_V3_RX_SIGDET_LVL 0x108 +#define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL 0x10c +#define QSERDES_V3_RX_RX_BAND 0x110 +#define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c + +/* Only for QMP V3 PHY - PCS registers */ +#define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004 +#define QPHY_V3_PCS_TXMGN_V0 0x00c +#define QPHY_V3_PCS_TXMGN_V1 0x010 +#define QPHY_V3_PCS_TXMGN_V2 0x014 +#define QPHY_V3_PCS_TXMGN_V3 0x018 +#define QPHY_V3_PCS_TXMGN_V4 0x01c +#define QPHY_V3_PCS_TXMGN_LS 0x020 +#define QPHY_V3_PCS_TXDEEMPH_M6DB_V0 0x024 +#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0 0x028 +#define QPHY_V3_PCS_TXDEEMPH_M6DB_V1 0x02c +#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1 0x030 +#define QPHY_V3_PCS_TXDEEMPH_M6DB_V2 0x034 +#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2 0x038 +#define QPHY_V3_PCS_TXDEEMPH_M6DB_V3 0x03c +#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3 0x040 +#define QPHY_V3_PCS_TXDEEMPH_M6DB_V4 0x044 +#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4 0x048 +#define QPHY_V3_PCS_TXDEEMPH_M6DB_LS 0x04c +#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS 0x050 +#define QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE 0x054 +#define QPHY_V3_PCS_RX_IDLE_DTCT_CNTRL 0x058 +#define QPHY_V3_PCS_RATE_SLEW_CNTRL 0x05c +#define QPHY_V3_PCS_POWER_STATE_CONFIG1 0x060 +#define QPHY_V3_PCS_POWER_STATE_CONFIG2 0x064 +#define QPHY_V3_PCS_POWER_STATE_CONFIG4 0x06c +#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L 0x070 +#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H 0x074 +#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L 0x078 +#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H 0x07c +#define QPHY_V3_PCS_LOCK_DETECT_CONFIG1 0x080 +#define QPHY_V3_PCS_LOCK_DETECT_CONFIG2 0x084 +#define QPHY_V3_PCS_LOCK_DETECT_CONFIG3 0x088 +#define QPHY_V3_PCS_TSYNC_RSYNC_TIME 0x08c +#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK 0x0a0 +#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK 0x0a4 +#define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK 0x0b0 +#define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME 0x0b8 +#define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME 0x0bc +#define QPHY_V3_PCS_FLL_CNTRL1 0x0c4 +#define QPHY_V3_PCS_FLL_CNTRL2 0x0c8 +#define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc +#define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0 +#define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4 +#define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8 + +/* Only for QMP V3 PHY - PCS_MISC registers */ +#define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 6c575244c0fb..94afeac1a19e 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/clk.h> @@ -37,28 +29,57 @@ #define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c #define QUSB2PHY_PLL_PWR_CTRL 0x18 -#define QUSB2PHY_PLL_STATUS 0x38 +/* QUSB2PHY_PLL_STATUS register bits */ #define PLL_LOCKED BIT(5) -#define QUSB2PHY_PORT_TUNE1 0x80 -#define QUSB2PHY_PORT_TUNE2 0x84 -#define QUSB2PHY_PORT_TUNE3 0x88 -#define QUSB2PHY_PORT_TUNE4 0x8c -#define QUSB2PHY_PORT_TUNE5 0x90 -#define QUSB2PHY_PORT_TEST2 0x9c +/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */ +#define CORE_READY_STATUS BIT(0) -#define QUSB2PHY_PORT_POWERDOWN 0xb4 +/* QUSB2PHY_PORT_POWERDOWN register bits */ #define CLAMP_N_EN BIT(5) #define FREEZIO_N BIT(1) #define POWER_DOWN BIT(0) +/* QUSB2PHY_PWR_CTRL1 register bits */ +#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5) +#define PWR_CTRL1_CLAMP_N_EN BIT(1) + #define QUSB2PHY_REFCLK_ENABLE BIT(0) #define PHY_CLK_SCHEME_SEL BIT(0) +/* QUSB2PHY_INTR_CTRL register bits */ +#define DMSE_INTR_HIGH_SEL BIT(4) +#define DPSE_INTR_HIGH_SEL BIT(3) +#define CHG_DET_INTR_EN BIT(2) +#define DMSE_INTR_EN BIT(1) +#define DPSE_INTR_EN BIT(0) + +/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */ +#define CORE_PLL_EN_FROM_RESET BIT(4) +#define CORE_RESET BIT(5) +#define CORE_RESET_MUX BIT(6) + +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c +#define QUSB2PHY_PLL_CMODE 0x2c +#define QUSB2PHY_PLL_LOCK_DELAY 0x184 +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4 +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194 +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198 +#define QUSB2PHY_PWR_CTRL2 0x214 +#define QUSB2PHY_IMP_CTRL1 0x220 +#define QUSB2PHY_IMP_CTRL2 0x224 +#define QUSB2PHY_CHG_CTRL2 0x23c + struct qusb2_phy_init_tbl { unsigned int offset; unsigned int val; + /* + * register part of layout ? + * if yes, then offset gives index in the reg-layout + */ + int in_layout; }; #define QUSB2_PHY_INIT_CFG(o, v) \ @@ -67,30 +88,136 @@ struct qusb2_phy_init_tbl { .val = v, \ } +#define QUSB2_PHY_INIT_CFG_L(o, v) \ + { \ + .offset = o, \ + .val = v, \ + .in_layout = 1, \ + } + +/* set of registers with offsets different per-PHY */ +enum qusb2phy_reg_layout { + QUSB2PHY_PLL_CORE_INPUT_OVERRIDE, + QUSB2PHY_PLL_STATUS, + QUSB2PHY_PORT_TUNE1, + QUSB2PHY_PORT_TUNE2, + QUSB2PHY_PORT_TUNE3, + QUSB2PHY_PORT_TUNE4, + QUSB2PHY_PORT_TUNE5, + QUSB2PHY_PORT_TEST1, + QUSB2PHY_PORT_TEST2, + QUSB2PHY_PORT_POWERDOWN, + QUSB2PHY_INTR_CTRL, +}; + +static const unsigned int msm8996_regs_layout[] = { + [QUSB2PHY_PLL_STATUS] = 0x38, + [QUSB2PHY_PORT_TUNE1] = 0x80, + [QUSB2PHY_PORT_TUNE2] = 0x84, + [QUSB2PHY_PORT_TUNE3] = 0x88, + [QUSB2PHY_PORT_TUNE4] = 0x8c, + [QUSB2PHY_PORT_TUNE5] = 0x90, + [QUSB2PHY_PORT_TEST1] = 0xb8, + [QUSB2PHY_PORT_TEST2] = 0x9c, + [QUSB2PHY_PORT_POWERDOWN] = 0xb4, + [QUSB2PHY_INTR_CTRL] = 0xbc, +}; + static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = { - QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE1, 0xf8), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE2, 0xb3), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE3, 0x83), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE4, 0xc0), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc0), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), - QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TEST2, 0x14), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), }; +static const unsigned int qusb2_v2_regs_layout[] = { + [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, + [QUSB2PHY_PLL_STATUS] = 0x1a0, + [QUSB2PHY_PORT_TUNE1] = 0x240, + [QUSB2PHY_PORT_TUNE2] = 0x244, + [QUSB2PHY_PORT_TUNE3] = 0x248, + [QUSB2PHY_PORT_TUNE4] = 0x24c, + [QUSB2PHY_PORT_TUNE5] = 0x250, + [QUSB2PHY_PORT_TEST1] = 0x254, + [QUSB2PHY_PORT_TEST2] = 0x258, + [QUSB2PHY_PORT_POWERDOWN] = 0x210, + [QUSB2PHY_INTR_CTRL] = 0x230, +}; + +static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0), +}; + struct qusb2_phy_cfg { const struct qusb2_phy_init_tbl *tbl; /* number of entries in the table */ unsigned int tbl_num; /* offset to PHY_CLK_SCHEME register in TCSR map */ unsigned int clk_scheme_offset; + + /* array of registers with different offsets */ + const unsigned int *regs; + unsigned int mask_core_ready; + unsigned int disable_ctrl; + unsigned int autoresume_en; + + /* true if PHY has PLL_TEST register to select clk_scheme */ + bool has_pll_test; + + /* true if TUNE1 register must be updated by fused value, else TUNE2 */ + bool update_tune1_with_efuse; + + /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */ + bool has_pll_override; }; static const struct qusb2_phy_cfg msm8996_phy_cfg = { - .tbl = msm8996_init_tbl, - .tbl_num = ARRAY_SIZE(msm8996_init_tbl), + .tbl = msm8996_init_tbl, + .tbl_num = ARRAY_SIZE(msm8996_init_tbl), + .regs = msm8996_regs_layout, + + .has_pll_test = true, + .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN), + .mask_core_ready = PLL_LOCKED, + .autoresume_en = BIT(3), +}; + +static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { + .tbl = qusb2_v2_init_tbl, + .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), + .regs = qusb2_v2_regs_layout, + + .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | + POWER_DOWN), + .mask_core_ready = CORE_READY_STATUS, + .has_pll_override = true, + .autoresume_en = BIT(0), }; static const char * const qusb2_phy_vreg_names[] = { @@ -116,6 +243,8 @@ static const char * const qusb2_phy_vreg_names[] = { * * @cfg: phy config data * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme + * @phy_initialized: indicate if PHY has been initialized + * @mode: current PHY mode */ struct qusb2_phy { struct phy *phy; @@ -132,6 +261,8 @@ struct qusb2_phy { const struct qusb2_phy_cfg *cfg; bool has_se_clk_scheme; + bool phy_initialized; + enum phy_mode mode; }; static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val) @@ -160,26 +291,32 @@ static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val) static inline void qcom_qusb2_phy_configure(void __iomem *base, + const unsigned int *regs, const struct qusb2_phy_init_tbl tbl[], int num) { int i; - for (i = 0; i < num; i++) - writel(tbl[i].val, base + tbl[i].offset); + for (i = 0; i < num; i++) { + if (tbl[i].in_layout) + writel(tbl[i].val, base + regs[tbl[i].offset]); + else + writel(tbl[i].val, base + tbl[i].offset); + } } /* * Fetches HS Tx tuning value from nvmem and sets the - * QUSB2PHY_PORT_TUNE2 register. + * QUSB2PHY_PORT_TUNE1/2 register. * For error case, skip setting the value and use the default value. */ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) { struct device *dev = &qphy->phy->dev; + const struct qusb2_phy_cfg *cfg = qphy->cfg; u8 *val; /* - * Read efuse register having TUNE2 parameter's high nibble. + * Read efuse register having TUNE2/1 parameter's high nibble. * If efuse register shows value as 0x0, or if we fail to find * a valid efuse register settings, then use default value * as 0xB for high nibble that we have already set while @@ -191,58 +328,169 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) return; } - /* Fused TUNE2 value is the higher nibble only */ - qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4); + /* Fused TUNE1/2 value is the higher nibble only */ + if (cfg->update_tune1_with_efuse) + qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + val[0] << 0x4); + else + qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2], + val[0] << 0x4); + } -static int qusb2_phy_poweron(struct phy *phy) +static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode) { struct qusb2_phy *qphy = phy_get_drvdata(phy); - int num = ARRAY_SIZE(qphy->vregs); + + qphy->mode = mode; + + return 0; +} + +static int __maybe_unused qusb2_phy_runtime_suspend(struct device *dev) +{ + struct qusb2_phy *qphy = dev_get_drvdata(dev); + const struct qusb2_phy_cfg *cfg = qphy->cfg; + u32 intr_mask; + + dev_vdbg(dev, "Suspending QUSB2 Phy, mode:%d\n", qphy->mode); + + if (!qphy->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } + + /* + * Enable DP/DM interrupts to detect line state changes based on current + * speed. In other words, enable the triggers _opposite_ of what the + * current D+/D- levels are e.g. if currently D+ high, D- low + * (HS 'J'/Suspend), configure the mask to trigger on D+ low OR D- high + */ + intr_mask = DPSE_INTR_EN | DMSE_INTR_EN; + switch (qphy->mode) { + case PHY_MODE_USB_HOST_HS: + case PHY_MODE_USB_HOST_FS: + case PHY_MODE_USB_DEVICE_HS: + case PHY_MODE_USB_DEVICE_FS: + intr_mask |= DMSE_INTR_HIGH_SEL; + break; + case PHY_MODE_USB_HOST_LS: + case PHY_MODE_USB_DEVICE_LS: + intr_mask |= DPSE_INTR_HIGH_SEL; + break; + default: + /* No device connected, enable both DP/DM high interrupt */ + intr_mask |= DMSE_INTR_HIGH_SEL; + intr_mask |= DPSE_INTR_HIGH_SEL; + break; + } + + writel(intr_mask, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]); + + /* hold core PLL into reset */ + if (cfg->has_pll_override) { + qusb2_setbits(qphy->base, + cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE], + CORE_PLL_EN_FROM_RESET | CORE_RESET | + CORE_RESET_MUX); + } + + /* enable phy auto-resume only if device is connected on bus */ + if (qphy->mode != PHY_MODE_INVALID) { + qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1], + cfg->autoresume_en); + /* Autoresume bit has to be toggled in order to enable it */ + qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1], + cfg->autoresume_en); + } + + if (!qphy->has_se_clk_scheme) + clk_disable_unprepare(qphy->ref_clk); + + clk_disable_unprepare(qphy->cfg_ahb_clk); + clk_disable_unprepare(qphy->iface_clk); + + return 0; +} + +static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev) +{ + struct qusb2_phy *qphy = dev_get_drvdata(dev); + const struct qusb2_phy_cfg *cfg = qphy->cfg; int ret; - dev_vdbg(&phy->dev, "%s(): Powering-on QUSB2 phy\n", __func__); + dev_vdbg(dev, "Resuming QUSB2 phy, mode:%d\n", qphy->mode); - /* turn on regulator supplies */ - ret = regulator_bulk_enable(num, qphy->vregs); - if (ret) - return ret; + if (!qphy->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } ret = clk_prepare_enable(qphy->iface_clk); if (ret) { - dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret); - regulator_bulk_disable(num, qphy->vregs); + dev_err(dev, "failed to enable iface_clk, %d\n", ret); return ret; } - return 0; -} + ret = clk_prepare_enable(qphy->cfg_ahb_clk); + if (ret) { + dev_err(dev, "failed to enable cfg ahb clock, %d\n", ret); + goto disable_iface_clk; + } -static int qusb2_phy_poweroff(struct phy *phy) -{ - struct qusb2_phy *qphy = phy_get_drvdata(phy); + if (!qphy->has_se_clk_scheme) { + clk_prepare_enable(qphy->ref_clk); + if (ret) { + dev_err(dev, "failed to enable ref clk, %d\n", ret); + goto disable_ahb_clk; + } + } - clk_disable_unprepare(qphy->iface_clk); + writel(0x0, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]); - regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + /* bring core PLL out of reset */ + if (cfg->has_pll_override) { + qusb2_clrbits(qphy->base, + cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE], + CORE_RESET | CORE_RESET_MUX); + } return 0; + +disable_ahb_clk: + clk_disable_unprepare(qphy->cfg_ahb_clk); +disable_iface_clk: + clk_disable_unprepare(qphy->iface_clk); + + return ret; } static int qusb2_phy_init(struct phy *phy) { struct qusb2_phy *qphy = phy_get_drvdata(phy); - unsigned int val; + const struct qusb2_phy_cfg *cfg = qphy->cfg; + unsigned int val = 0; unsigned int clk_scheme; int ret; dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__); + /* turn on regulator supplies */ + ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + if (ret) + return ret; + + ret = clk_prepare_enable(qphy->iface_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret); + goto poweroff_phy; + } + /* enable ahb interface clock to program phy */ ret = clk_prepare_enable(qphy->cfg_ahb_clk); if (ret) { dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); - return ret; + goto disable_iface_clk; } /* Perform phy reset */ @@ -262,20 +510,23 @@ static int qusb2_phy_init(struct phy *phy) } /* Disable the PHY */ - qusb2_setbits(qphy->base, QUSB2PHY_PORT_POWERDOWN, - CLAMP_N_EN | FREEZIO_N | POWER_DOWN); + qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); - /* save reset value to override reference clock scheme later */ - val = readl(qphy->base + QUSB2PHY_PLL_TEST); + if (cfg->has_pll_test) { + /* save reset value to override reference clock scheme later */ + val = readl(qphy->base + QUSB2PHY_PLL_TEST); + } - qcom_qusb2_phy_configure(qphy->base, qphy->cfg->tbl, - qphy->cfg->tbl_num); + qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, + cfg->tbl_num); /* Set efuse value for tuning the PHY */ qusb2_phy_set_tune2_param(qphy); /* Enable the PHY */ - qusb2_clrbits(qphy->base, QUSB2PHY_PORT_POWERDOWN, POWER_DOWN); + qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN], + POWER_DOWN); /* Required to get phy pll lock successfully */ usleep_range(150, 160); @@ -308,32 +559,37 @@ static int qusb2_phy_init(struct phy *phy) } if (!qphy->has_se_clk_scheme) { - val &= ~CLK_REF_SEL; ret = clk_prepare_enable(qphy->ref_clk); if (ret) { dev_err(&phy->dev, "failed to enable ref clk, %d\n", ret); goto assert_phy_reset; } - } else { - val |= CLK_REF_SEL; } - writel(val, qphy->base + QUSB2PHY_PLL_TEST); + if (cfg->has_pll_test) { + if (!qphy->has_se_clk_scheme) + val &= ~CLK_REF_SEL; + else + val |= CLK_REF_SEL; - /* ensure above write is through */ - readl(qphy->base + QUSB2PHY_PLL_TEST); + writel(val, qphy->base + QUSB2PHY_PLL_TEST); + + /* ensure above write is through */ + readl(qphy->base + QUSB2PHY_PLL_TEST); + } /* Required to get phy pll lock successfully */ usleep_range(100, 110); - val = readb(qphy->base + QUSB2PHY_PLL_STATUS); - if (!(val & PLL_LOCKED)) { + val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]); + if (!(val & cfg->mask_core_ready)) { dev_err(&phy->dev, "QUSB2PHY pll lock failed: status reg = %x\n", val); ret = -EBUSY; goto disable_ref_clk; } + qphy->phy_initialized = true; return 0; @@ -344,6 +600,11 @@ assert_phy_reset: reset_control_assert(qphy->phy_reset); disable_ahb_clk: clk_disable_unprepare(qphy->cfg_ahb_clk); +disable_iface_clk: + clk_disable_unprepare(qphy->iface_clk); +poweroff_phy: + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + return ret; } @@ -352,8 +613,8 @@ static int qusb2_phy_exit(struct phy *phy) struct qusb2_phy *qphy = phy_get_drvdata(phy); /* Disable the PHY */ - qusb2_setbits(qphy->base, QUSB2PHY_PORT_POWERDOWN, - CLAMP_N_EN | FREEZIO_N | POWER_DOWN); + qusb2_setbits(qphy->base, qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); if (!qphy->has_se_clk_scheme) clk_disable_unprepare(qphy->ref_clk); @@ -361,6 +622,11 @@ static int qusb2_phy_exit(struct phy *phy) reset_control_assert(qphy->phy_reset); clk_disable_unprepare(qphy->cfg_ahb_clk); + clk_disable_unprepare(qphy->iface_clk); + + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + + qphy->phy_initialized = false; return 0; } @@ -368,8 +634,7 @@ static int qusb2_phy_exit(struct phy *phy) static const struct phy_ops qusb2_phy_gen_ops = { .init = qusb2_phy_init, .exit = qusb2_phy_exit, - .power_on = qusb2_phy_poweron, - .power_off = qusb2_phy_poweroff, + .set_mode = qusb2_phy_set_mode, .owner = THIS_MODULE, }; @@ -377,11 +642,19 @@ static const struct of_device_id qusb2_phy_of_match_table[] = { { .compatible = "qcom,msm8996-qusb2-phy", .data = &msm8996_phy_cfg, + }, { + .compatible = "qcom,qusb2-v2-phy", + .data = &qusb2_v2_phy_cfg, }, { }, }; MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table); +static const struct dev_pm_ops qusb2_phy_pm_ops = { + SET_RUNTIME_PM_OPS(qusb2_phy_runtime_suspend, + qusb2_phy_runtime_resume, NULL) +}; + static int qusb2_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -459,11 +732,19 @@ static int qusb2_phy_probe(struct platform_device *pdev) qphy->cell = NULL; dev_dbg(dev, "failed to lookup tune2 hstx trim value\n"); } + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + /* + * Prevent runtime pm from being ON by default. Users can enable + * it using power/control in sysfs. + */ + pm_runtime_forbid(dev); generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops); if (IS_ERR(generic_phy)) { ret = PTR_ERR(generic_phy); dev_err(dev, "failed to create phy, %d\n", ret); + pm_runtime_disable(dev); return ret; } qphy->phy = generic_phy; @@ -474,6 +755,8 @@ static int qusb2_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (!IS_ERR(phy_provider)) dev_info(dev, "Registered Qcom-QUSB2 phy\n"); + else + pm_runtime_disable(dev); return PTR_ERR_OR_ZERO(phy_provider); } @@ -482,6 +765,7 @@ static struct platform_driver qusb2_phy_driver = { .probe = qusb2_phy_probe, .driver = { .name = "qcom-qusb2-phy", + .pm = &qusb2_phy_pm_ops, .of_match_table = qusb2_phy_of_match_table, }, }; diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig index b17635b407bc..14fd219535ef 100644 --- a/drivers/phy/ralink/Kconfig +++ b/drivers/phy/ralink/Kconfig @@ -4,6 +4,7 @@ config PHY_RALINK_USB tristate "Ralink USB PHY driver" depends on RALINK || COMPILE_TEST + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 9c90e7d67e0a..fb8f05e39cf7 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -397,6 +397,10 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS, }, { + .compatible = "renesas,usb2-phy-r8a77965", + .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS, + }, + { .compatible = "renesas,rcar-gen3-usb2-phy", }, { } diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index f5325b2b679e..0e15119ddfc6 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -29,6 +29,7 @@ config PHY_ROCKCHIP_INNO_USB2 config PHY_ROCKCHIP_PCIE tristate "Rockchip PCIe PHY Driver" depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c index f1b24f18e9b2..b237360f95f6 100644 --- a/drivers/phy/rockchip/phy-rockchip-emmc.c +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c @@ -76,6 +76,13 @@ #define PHYCTRL_OTAPDLYSEL_MASK 0xf #define PHYCTRL_OTAPDLYSEL_SHIFT 0x7 +#define PHYCTRL_IS_CALDONE(x) \ + ((((x) >> PHYCTRL_CALDONE_SHIFT) & \ + PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE) +#define PHYCTRL_IS_DLLRDY(x) \ + ((((x) >> PHYCTRL_DLLRDY_SHIFT) & \ + PHYCTRL_DLLRDY_MASK) == PHYCTRL_DLLRDY_DONE) + struct rockchip_emmc_phy { unsigned int reg_offset; struct regmap *reg_base; @@ -89,7 +96,7 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) unsigned int dllrdy; unsigned int freqsel = PHYCTRL_FREQSEL_200M; unsigned long rate; - unsigned long timeout; + int ret; /* * Keep phyctrl_pdb and phyctrl_endll low to allow @@ -160,17 +167,19 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) PHYCTRL_PDB_SHIFT)); /* - * According to the user manual, it asks driver to - * wait 5us for calpad busy trimming + * According to the user manual, it asks driver to wait 5us for + * calpad busy trimming. However it is documented that this value is + * PVT(A.K.A process,voltage and temperature) relevant, so some + * failure cases are found which indicates we should be more tolerant + * to calpad busy trimming. */ - udelay(5); - regmap_read(rk_phy->reg_base, - rk_phy->reg_offset + GRF_EMMCPHY_STATUS, - &caldone); - caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK; - if (caldone != PHYCTRL_CALDONE_DONE) { - pr_err("rockchip_emmc_phy_power: caldone timeout.\n"); - return -ETIMEDOUT; + ret = regmap_read_poll_timeout(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_STATUS, + caldone, PHYCTRL_IS_CALDONE(caldone), + 0, 50); + if (ret) { + pr_err("%s: caldone failed, ret=%d\n", __func__, ret); + return ret; } /* Set the frequency of the DLL operation */ @@ -210,28 +219,15 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) * NOTE: There appear to be corner cases where the DLL seems to take * extra long to lock for reasons that aren't understood. In some * extreme cases we've seen it take up to over 10ms (!). We'll be - * generous and give it 50ms. We still busy wait here because: - * - In most cases it should be super fast. - * - This is not called lots during normal operation so it shouldn't - * be a power or performance problem to busy wait. We expect it - * only at boot / resume. In both cases, eMMC is probably on the - * critical path so busy waiting a little extra time should be OK. + * generous and give it 50ms. */ - timeout = jiffies + msecs_to_jiffies(50); - do { - udelay(1); - - regmap_read(rk_phy->reg_base, - rk_phy->reg_offset + GRF_EMMCPHY_STATUS, - &dllrdy); - dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK; - if (dllrdy == PHYCTRL_DLLRDY_DONE) - break; - } while (!time_after(jiffies, timeout)); - - if (dllrdy != PHYCTRL_DLLRDY_DONE) { - pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n"); - return -ETIMEDOUT; + ret = regmap_read_poll_timeout(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_STATUS, + dllrdy, PHYCTRL_IS_DLLRDY(dllrdy), + 0, 50 * USEC_PER_MSEC); + if (ret) { + pr_err("%s: dllrdy failed. ret=%d\n", __func__, ret); + return ret; } return 0; diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index 7492c8978217..76a4b58ec771 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -355,11 +355,26 @@ struct usb3phy_reg { u32 write_enable; }; +/** + * struct rockchip_usb3phy_port_cfg: usb3-phy port configuration. + * @reg: the base address for usb3-phy config. + * @typec_conn_dir: the register of type-c connector direction. + * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable. + * @external_psm: the register of type-c phy external psm clock. + * @pipe_status: the register of type-c phy pipe status. + * @usb3_host_disable: the register of type-c usb3 host disable. + * @usb3_host_port: the register of type-c usb3 host port. + * @uphy_dp_sel: the register of type-c phy DP select control. + */ struct rockchip_usb3phy_port_cfg { + unsigned int reg; struct usb3phy_reg typec_conn_dir; struct usb3phy_reg usb3tousb2_en; struct usb3phy_reg external_psm; struct usb3phy_reg pipe_status; + struct usb3phy_reg usb3_host_disable; + struct usb3phy_reg usb3_host_port; + struct usb3phy_reg uphy_dp_sel; }; struct rockchip_typec_phy { @@ -372,7 +387,7 @@ struct rockchip_typec_phy { struct reset_control *uphy_rst; struct reset_control *pipe_rst; struct reset_control *tcphy_rst; - struct rockchip_usb3phy_port_cfg port_cfgs; + const struct rockchip_usb3phy_port_cfg *port_cfgs; /* mutex to protect access to individual PHYs */ struct mutex lock; @@ -424,6 +439,30 @@ struct phy_reg dp_pll_cfg[] = { { 0x4, CMN_DIAG_PLL1_INCLK_CTRL }, }; +static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = { + { + .reg = 0xff7c0000, + .typec_conn_dir = { 0xe580, 0, 16 }, + .usb3tousb2_en = { 0xe580, 3, 19 }, + .external_psm = { 0xe588, 14, 30 }, + .pipe_status = { 0xe5c0, 0, 0 }, + .usb3_host_disable = { 0x2434, 0, 16 }, + .usb3_host_port = { 0x2434, 12, 28 }, + .uphy_dp_sel = { 0x6268, 19, 19 }, + }, + { + .reg = 0xff800000, + .typec_conn_dir = { 0xe58c, 0, 16 }, + .usb3tousb2_en = { 0xe58c, 3, 19 }, + .external_psm = { 0xe594, 14, 30 }, + .pipe_status = { 0xe5c0, 16, 16 }, + .usb3_host_disable = { 0x2444, 0, 16 }, + .usb3_host_port = { 0x2444, 12, 28 }, + .uphy_dp_sel = { 0x6268, 3, 19 }, + }, + { /* sentinel */ } +}; + static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy) { u32 i, rdata; @@ -691,7 +730,7 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) { - struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; int ret, i; u32 val; @@ -782,6 +821,9 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) u8 mode; int ret; + if (!edev) + return MODE_DFP_USB; + ufp = extcon_get_state(edev, EXTCON_USB); dp = extcon_get_state(edev, EXTCON_DISP_DP); @@ -818,10 +860,22 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) return mode; } +static int tcphy_cfg_usb3_to_usb2_only(struct rockchip_typec_phy *tcphy, + bool value) +{ + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + + property_enable(tcphy, &cfg->usb3tousb2_en, value); + property_enable(tcphy, &cfg->usb3_host_disable, value); + property_enable(tcphy, &cfg->usb3_host_port, !value); + + return 0; +} + static int rockchip_usb3_phy_power_on(struct phy *phy) { struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); - struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; const struct usb3phy_reg *reg = &cfg->pipe_status; int timeout, new_mode, ret = 0; u32 val; @@ -835,8 +889,10 @@ static int rockchip_usb3_phy_power_on(struct phy *phy) } /* DP-only mode; fall back to USB2 */ - if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) + if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) { + tcphy_cfg_usb3_to_usb2_only(tcphy, true); goto unlock_ret; + } if (tcphy->mode == new_mode) goto unlock_ret; @@ -852,6 +908,9 @@ static int rockchip_usb3_phy_power_on(struct phy *phy) regmap_read(tcphy->grf_regs, reg->offset, &val); if (!(val & BIT(reg->enable_bit))) { tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB); + + /* enable usb3 host */ + tcphy_cfg_usb3_to_usb2_only(tcphy, false); goto unlock_ret; } usleep_range(10, 20); @@ -872,6 +931,7 @@ static int rockchip_usb3_phy_power_off(struct phy *phy) struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); mutex_lock(&tcphy->lock); + tcphy_cfg_usb3_to_usb2_only(tcphy, false); if (tcphy->mode == MODE_DISCONNECT) goto unlock; @@ -894,6 +954,7 @@ static const struct phy_ops rockchip_usb3_phy_ops = { static int rockchip_dp_phy_power_on(struct phy *phy) { struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; int new_mode, ret = 0; u32 val; @@ -926,6 +987,8 @@ static int rockchip_dp_phy_power_on(struct phy *phy) if (ret) goto unlock_ret; + property_enable(tcphy, &cfg->uphy_dp_sel, 1); + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, val, val & DP_MODE_A2, 1000, PHY_MODE_SET_TIMEOUT); @@ -984,51 +1047,9 @@ static const struct phy_ops rockchip_dp_phy_ops = { .owner = THIS_MODULE, }; -static int tcphy_get_param(struct device *dev, - struct usb3phy_reg *reg, - const char *name) -{ - u32 buffer[3]; - int ret; - - ret = of_property_read_u32_array(dev->of_node, name, buffer, 3); - if (ret) { - dev_err(dev, "Can not parse %s\n", name); - return ret; - } - - reg->offset = buffer[0]; - reg->enable_bit = buffer[1]; - reg->write_enable = buffer[2]; - return 0; -} - static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy, struct device *dev) { - struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; - int ret; - - ret = tcphy_get_param(dev, &cfg->typec_conn_dir, - "rockchip,typec-conn-dir"); - if (ret) - return ret; - - ret = tcphy_get_param(dev, &cfg->usb3tousb2_en, - "rockchip,usb3tousb2-en"); - if (ret) - return ret; - - ret = tcphy_get_param(dev, &cfg->external_psm, - "rockchip,external-psm"); - if (ret) - return ret; - - ret = tcphy_get_param(dev, &cfg->pipe_status, - "rockchip,pipe-status"); - if (ret) - return ret; - tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); if (IS_ERR(tcphy->grf_regs)) { @@ -1071,7 +1092,7 @@ static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy, static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy) { - struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; reset_control_assert(tcphy->tcphy_rst); reset_control_assert(tcphy->uphy_rst); @@ -1092,17 +1113,43 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev) struct rockchip_typec_phy *tcphy; struct phy_provider *phy_provider; struct resource *res; - int ret; + const struct rockchip_usb3phy_port_cfg *phy_cfgs; + const struct of_device_id *match; + int index, ret; tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL); if (!tcphy) return -ENOMEM; + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) { + dev_err(dev, "phy configs are not assigned!\n"); + return -EINVAL; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); tcphy->base = devm_ioremap_resource(dev, res); if (IS_ERR(tcphy->base)) return PTR_ERR(tcphy->base); + phy_cfgs = match->data; + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == res->start) { + tcphy->port_cfgs = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!tcphy->port_cfgs) { + dev_err(dev, "no phy-config can be matched with %s node\n", + np->name); + return -EINVAL; + } + ret = tcphy_parse_dt(tcphy, dev); if (ret) return ret; @@ -1115,9 +1162,13 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev) tcphy->extcon = extcon_get_edev_by_phandle(dev, 0); if (IS_ERR(tcphy->extcon)) { - if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER) - dev_err(dev, "Invalid or missing extcon\n"); - return PTR_ERR(tcphy->extcon); + if (PTR_ERR(tcphy->extcon) == -ENODEV) { + tcphy->extcon = NULL; + } else { + if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER) + dev_err(dev, "Invalid or missing extcon\n"); + return PTR_ERR(tcphy->extcon); + } } pm_runtime_enable(dev); @@ -1162,8 +1213,11 @@ static int rockchip_typec_phy_remove(struct platform_device *pdev) } static const struct of_device_id rockchip_typec_phy_dt_ids[] = { - { .compatible = "rockchip,rk3399-typec-phy" }, - {} + { + .compatible = "rockchip,rk3399-typec-phy", + .data = &rk3399_usb3phy_port_cfgs + }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids); diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig index b7e0645a7bd9..2a5d33cb0e7e 100644 --- a/drivers/phy/samsung/Kconfig +++ b/drivers/phy/samsung/Kconfig @@ -49,7 +49,7 @@ config PHY_EXYNOS4210_USB2 config PHY_EXYNOS4X12_USB2 bool depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 + default SOC_EXYNOS3250 || SOC_EXYNOS4412 config PHY_EXYNOS5250_USB2 bool diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig index 0814d3f87ec6..609719bdfa50 100644 --- a/drivers/phy/st/Kconfig +++ b/drivers/phy/st/Kconfig @@ -31,3 +31,17 @@ config PHY_STIH407_USB help Enable this support to enable the picoPHY device used by USB2 and USB3 controllers on STMicroelectronics STiH407 SoC families. + +config PHY_STM32_USBPHYC + tristate "STMicroelectronics STM32 USB HS PHY Controller driver" + depends on ARCH_STM32 || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the High-Speed USB transceivers that are part + of some STMicroelectronics STM32 SoCs. + + This driver controls the entire USB PHY block: the USB PHY controller + (USBPHYC) and the two 8-bit wide UTMI+ interfaces. First interface is + used by an HS USB Host controller, and the second one is shared + between an HS USB OTG controller and an HS USB Host controller, + selected by a USB switch. diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile index e2adfe2166d2..c0091ad1fd48 100644 --- a/drivers/phy/st/Makefile +++ b/drivers/phy/st/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o +obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c new file mode 100644 index 000000000000..bc4e78a19c91 --- /dev/null +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -0,0 +1,461 @@ +// SPDX-Licence-Identifier: GPL-2.0 +/* + * STMicroelectronics STM32 USB PHY Controller driver + * + * Copyright (C) 2018 STMicroelectronics + * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. + */ +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/reset.h> + +#define STM32_USBPHYC_PLL 0x0 +#define STM32_USBPHYC_MISC 0x8 +#define STM32_USBPHYC_VERSION 0x3F4 + +/* STM32_USBPHYC_PLL bit fields */ +#define PLLNDIV GENMASK(6, 0) +#define PLLFRACIN GENMASK(25, 10) +#define PLLEN BIT(26) +#define PLLSTRB BIT(27) +#define PLLSTRBYP BIT(28) +#define PLLFRACCTL BIT(29) +#define PLLDITHEN0 BIT(30) +#define PLLDITHEN1 BIT(31) + +/* STM32_USBPHYC_MISC bit fields */ +#define SWITHOST BIT(0) + +/* STM32_USBPHYC_VERSION bit fields */ +#define MINREV GENMASK(3, 0) +#define MAJREV GENMASK(7, 4) + +static const char * const supplies_names[] = { + "vdda1v1", /* 1V1 */ + "vdda1v8", /* 1V8 */ +}; + +#define NUM_SUPPLIES ARRAY_SIZE(supplies_names) + +#define PLL_LOCK_TIME_US 100 +#define PLL_PWR_DOWN_TIME_US 5 +#define PLL_FVCO_MHZ 2880 +#define PLL_INFF_MIN_RATE_HZ 19200000 +#define PLL_INFF_MAX_RATE_HZ 38400000 +#define HZ_PER_MHZ 1000000L + +struct pll_params { + u8 ndiv; + u16 frac; +}; + +struct stm32_usbphyc_phy { + struct phy *phy; + struct stm32_usbphyc *usbphyc; + struct regulator_bulk_data supplies[NUM_SUPPLIES]; + u32 index; + bool active; +}; + +struct stm32_usbphyc { + struct device *dev; + void __iomem *base; + struct clk *clk; + struct reset_control *rst; + struct stm32_usbphyc_phy **phys; + int nphys; + int switch_setup; + bool pll_enabled; +}; + +static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) +{ + writel_relaxed(readl_relaxed(reg) | bits, reg); +} + +static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) +{ + writel_relaxed(readl_relaxed(reg) & ~bits, reg); +} + +static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params) +{ + unsigned long long fvco, ndiv, frac; + + /* _ + * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1 + * | FVCO = 2880MHz + * < + * | NDIV = integer part of input bits to set the LDF + * |_FRACT = fractional part of input bits to set the LDF + * => PLLNDIV = integer part of (FVCO / (INFF*2)) + * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16 + * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16 + */ + fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; + + ndiv = fvco; + do_div(ndiv, (clk_rate * 2)); + pll_params->ndiv = (u8)ndiv; + + frac = fvco * (1 << 16); + do_div(frac, (clk_rate * 2)); + frac = frac - (ndiv * (1 << 16)); + pll_params->frac = (u16)frac; +} + +static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) +{ + struct pll_params pll_params; + u32 clk_rate = clk_get_rate(usbphyc->clk); + u32 ndiv, frac; + u32 usbphyc_pll; + + if ((clk_rate < PLL_INFF_MIN_RATE_HZ) || + (clk_rate > PLL_INFF_MAX_RATE_HZ)) { + dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n", + clk_rate); + return -EINVAL; + } + + stm32_usbphyc_get_pll_params(clk_rate, &pll_params); + ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv); + frac = FIELD_PREP(PLLFRACIN, pll_params.frac); + + usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv; + + if (pll_params.frac) + usbphyc_pll |= PLLFRACCTL | frac; + + writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); + + dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", + clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), + FIELD_GET(PLLFRACIN, usbphyc_pll)); + + return 0; +} + +static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc) +{ + int i; + + for (i = 0; i < usbphyc->nphys; i++) + if (usbphyc->phys[i]->active) + return true; + + return false; +} + +static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) +{ + void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; + bool pllen = (readl_relaxed(pll_reg) & PLLEN); + int ret; + + /* Check if one phy port has already configured the pll */ + if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc)) + return 0; + + if (pllen) { + stm32_usbphyc_clr_bits(pll_reg, PLLEN); + /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ + udelay(PLL_PWR_DOWN_TIME_US); + } + + ret = stm32_usbphyc_pll_init(usbphyc); + if (ret) + return ret; + + stm32_usbphyc_set_bits(pll_reg, PLLEN); + + /* Wait for maximum lock time */ + udelay(PLL_LOCK_TIME_US); + + if (!(readl_relaxed(pll_reg) & PLLEN)) { + dev_err(usbphyc->dev, "PLLEN not set\n"); + return -EIO; + } + + return 0; +} + +static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) +{ + void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; + + /* Check if other phy port active */ + if (stm32_usbphyc_has_one_phy_active(usbphyc)) + return 0; + + stm32_usbphyc_clr_bits(pll_reg, PLLEN); + /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ + udelay(PLL_PWR_DOWN_TIME_US); + + if (readl_relaxed(pll_reg) & PLLEN) { + dev_err(usbphyc->dev, "PLL not reset\n"); + return -EIO; + } + + return 0; +} + +static int stm32_usbphyc_phy_init(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; + int ret; + + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return ret; + + usbphyc_phy->active = true; + + return 0; +} + +static int stm32_usbphyc_phy_exit(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; + + usbphyc_phy->active = false; + + return stm32_usbphyc_pll_disable(usbphyc); +} + +static int stm32_usbphyc_phy_power_on(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies); +} + +static int stm32_usbphyc_phy_power_off(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies); +} + +static const struct phy_ops stm32_usbphyc_phy_ops = { + .init = stm32_usbphyc_phy_init, + .exit = stm32_usbphyc_phy_exit, + .power_on = stm32_usbphyc_phy_power_on, + .power_off = stm32_usbphyc_phy_power_off, + .owner = THIS_MODULE, +}; + +static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, + u32 utmi_switch) +{ + if (!utmi_switch) + stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC, + SWITHOST); + else + stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC, + SWITHOST); + usbphyc->switch_setup = utmi_switch; +} + +static struct phy *stm32_usbphyc_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); + struct stm32_usbphyc_phy *usbphyc_phy = NULL; + struct device_node *phynode = args->np; + + int port = 0; + + for (port = 0; port < usbphyc->nphys; port++) { + if (phynode == usbphyc->phys[port]->phy->dev.of_node) { + usbphyc_phy = usbphyc->phys[port]; + break; + } + } + if (!usbphyc_phy) { + dev_err(dev, "failed to find phy\n"); + return ERR_PTR(-EINVAL); + } + + if (((usbphyc_phy->index == 0) && (args->args_count != 0)) || + ((usbphyc_phy->index == 1) && (args->args_count != 1))) { + dev_err(dev, "invalid number of cells for phy port%d\n", + usbphyc_phy->index); + return ERR_PTR(-EINVAL); + } + + /* Configure the UTMI switch for PHY port#2 */ + if (usbphyc_phy->index == 1) { + if (usbphyc->switch_setup < 0) { + stm32_usbphyc_switch_setup(usbphyc, args->args[0]); + } else { + if (args->args[0] != usbphyc->switch_setup) { + dev_err(dev, "phy port1 already used\n"); + return ERR_PTR(-EBUSY); + } + } + } + + return usbphyc_phy->phy; +} + +static int stm32_usbphyc_probe(struct platform_device *pdev) +{ + struct stm32_usbphyc *usbphyc; + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + struct resource *res; + struct phy_provider *phy_provider; + u32 version; + int ret, port = 0; + + usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); + if (!usbphyc) + return -ENOMEM; + usbphyc->dev = dev; + dev_set_drvdata(dev, usbphyc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + usbphyc->base = devm_ioremap_resource(dev, res); + if (IS_ERR(usbphyc->base)) + return PTR_ERR(usbphyc->base); + + usbphyc->clk = devm_clk_get(dev, 0); + if (IS_ERR(usbphyc->clk)) { + ret = PTR_ERR(usbphyc->clk); + dev_err(dev, "clk get failed: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(usbphyc->clk); + if (ret) { + dev_err(dev, "clk enable failed: %d\n", ret); + return ret; + } + + usbphyc->rst = devm_reset_control_get(dev, 0); + if (!IS_ERR(usbphyc->rst)) { + reset_control_assert(usbphyc->rst); + udelay(2); + reset_control_deassert(usbphyc->rst); + } + + usbphyc->switch_setup = -EINVAL; + usbphyc->nphys = of_get_child_count(np); + usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys, + sizeof(*usbphyc->phys), GFP_KERNEL); + if (!usbphyc->phys) { + ret = -ENOMEM; + goto clk_disable; + } + + for_each_child_of_node(np, child) { + struct stm32_usbphyc_phy *usbphyc_phy; + struct phy *phy; + u32 index; + int i; + + phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, + "failed to create phy%d: %d\n", i, ret); + goto put_child; + } + + usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy), + GFP_KERNEL); + if (!usbphyc_phy) { + ret = -ENOMEM; + goto put_child; + } + + for (i = 0; i < NUM_SUPPLIES; i++) + usbphyc_phy->supplies[i].supply = supplies_names[i]; + + ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES, + usbphyc_phy->supplies); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&phy->dev, + "failed to get regulators: %d\n", ret); + goto put_child; + } + + ret = of_property_read_u32(child, "reg", &index); + if (ret || index > usbphyc->nphys) { + dev_err(&phy->dev, "invalid reg property: %d\n", ret); + goto put_child; + } + + usbphyc->phys[port] = usbphyc_phy; + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, usbphyc_phy); + + usbphyc->phys[port]->phy = phy; + usbphyc->phys[port]->usbphyc = usbphyc; + usbphyc->phys[port]->index = index; + usbphyc->phys[port]->active = false; + + port++; + } + + phy_provider = devm_of_phy_provider_register(dev, + stm32_usbphyc_of_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + dev_err(dev, "failed to register phy provider: %d\n", ret); + goto clk_disable; + } + + version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); + dev_info(dev, "registered rev:%lu.%lu\n", + FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); + + return 0; + +put_child: + of_node_put(child); +clk_disable: + clk_disable_unprepare(usbphyc->clk); + + return ret; +} + +static int stm32_usbphyc_remove(struct platform_device *pdev) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); + + clk_disable_unprepare(usbphyc->clk); + + return 0; +} + +static const struct of_device_id stm32_usbphyc_of_match[] = { + { .compatible = "st,stm32mp1-usbphyc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); + +static struct platform_driver stm32_usbphyc_driver = { + .probe = stm32_usbphyc_probe, + .remove = stm32_usbphyc_remove, + .driver = { + .of_match_table = stm32_usbphyc_of_match, + .name = "stm32-usbphyc", + } +}; +module_platform_driver(stm32_usbphyc_driver); + +MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver"); +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c index 9d0689ebd28c..05bee32a3a4d 100644 --- a/drivers/phy/tegra/xusb-tegra210.c +++ b/drivers/phy/tegra/xusb-tegra210.c @@ -169,6 +169,7 @@ #define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN (1 << 0) #define XUSB_PADCTL_UPHY_PLL_P0_CTL4 0x36c +#define XUSB_PADCTL_UPHY_PLL_CTL4_XDIGCLK_EN (1 << 19) #define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN (1 << 15) #define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT 12 #define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK 0x3 @@ -537,11 +538,8 @@ static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb) value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SATA_VAL << XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT); - /* XXX PLL0_XDIGCLK_EN */ - /* - value &= ~(1 << 19); + value &= ~XUSB_PADCTL_UPHY_PLL_CTL4_XDIGCLK_EN; padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL4); - */ value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1); value &= ~((XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK << diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 63e916d4d069..11aa5902a9ac 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -418,7 +418,7 @@ tegra_xusb_port_find_lane(struct tegra_xusb_port *port, { struct tegra_xusb_lane *lane, *match = ERR_PTR(-ENODEV); - for (map = map; map->type; map++) { + for (; map->type; map++) { if (port->index != map->port) continue; |