diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-03-05 12:22:41 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-03-05 12:22:41 -0800 |
commit | a567500598961a487f6c9a78b61d419c8df90c8b (patch) | |
tree | 8a47c2962e5cb640e794a216e9abf4de6fac5566 /drivers/phy | |
parent | 69bec725985324e79b1c47ea287815ac4ddb0521 (diff) | |
parent | 89636adde4a05953e3bf18807ba1f6f205572f67 (diff) | |
download | linux-stable-a567500598961a487f6c9a78b61d419c8df90c8b.tar.gz linux-stable-a567500598961a487f6c9a78b61d419c8df90c8b.tar.bz2 linux-stable-a567500598961a487f6c9a78b61d419c8df90c8b.zip |
Merge tag 'phy-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing
Kishon writes:
phy: for 4.6
*) Add driver for rockchip Display Port PHY
*) Add driver for the Rockchip SoC internal eMMC PHY
*) Add usb-uart functionality in rockchip-usb
*) cleanup rcar usb2 PHY driver
*) Fix for randconfig error
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/Kconfig | 16 | ||||
-rw-r--r-- | drivers/phy/Makefile | 2 | ||||
-rw-r--r-- | drivers/phy/phy-rcar-gen3-usb2.c | 83 | ||||
-rw-r--r-- | drivers/phy/phy-rockchip-dp.c | 151 | ||||
-rw-r--r-- | drivers/phy/phy-rockchip-emmc.c | 229 | ||||
-rw-r--r-- | drivers/phy/phy-rockchip-usb.c | 233 |
6 files changed, 605 insertions, 109 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 0124d17bd9fe..26566db09de0 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -32,7 +32,7 @@ config PHY_BERLIN_SATA config ARMADA375_USBCLUSTER_PHY def_bool y depends on MACH_ARMADA_375 || COMPILE_TEST - depends on OF + depends on OF && HAS_IOMEM select GENERIC_PHY config PHY_DM816X_USB @@ -337,6 +337,20 @@ config PHY_ROCKCHIP_USB help Enable this to support the Rockchip USB 2.0 PHY. +config PHY_ROCKCHIP_EMMC + tristate "Rockchip EMMC PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip EMMC PHY. + +config PHY_ROCKCHIP_DP + tristate "Rockchip Display Port PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip Display Port PHY. + config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index c80f09df3bb8..24596a96a887 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -37,6 +37,8 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index ef332ef4abc7..bc4f7dd821aa 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -74,20 +74,6 @@ #define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */ #define USB2_ADPCTRL_DRVVBUS BIT(4) -/******* HSUSB registers (original offset is +0x100) *******/ -#define HSUSB_LPSTS 0x02 -#define HSUSB_UGCTRL2 0x84 - -/* Low Power Status register (LPSTS) */ -#define HSUSB_LPSTS_SUSPM 0x4000 - -/* USB General control register 2 (UGCTRL2) */ -#define HSUSB_UGCTRL2_MASK 0x00000031 /* bit[31:6] should be 0 */ -#define HSUSB_UGCTRL2_USB0SEL 0x00000030 -#define HSUSB_UGCTRL2_USB0SEL_HOST 0x00000010 -#define HSUSB_UGCTRL2_USB0SEL_HS_USB 0x00000020 -#define HSUSB_UGCTRL2_USB0SEL_OTG 0x00000030 - struct rcar_gen3_data { void __iomem *base; struct clk *clk; @@ -95,8 +81,8 @@ struct rcar_gen3_data { struct rcar_gen3_chan { struct rcar_gen3_data usb2; - struct rcar_gen3_data hsusb; struct phy *phy; + bool has_otg; }; static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host) @@ -202,24 +188,15 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) { struct rcar_gen3_chan *channel = phy_get_drvdata(p); void __iomem *usb2_base = channel->usb2.base; - void __iomem *hsusb_base = channel->hsusb.base; - u32 val; /* Initialize USB2 part */ writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE); writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); - /* Initialize HSUSB part */ - if (hsusb_base) { - val = readl(hsusb_base + HSUSB_UGCTRL2); - val = (val & ~HSUSB_UGCTRL2_USB0SEL) | - HSUSB_UGCTRL2_USB0SEL_OTG; - writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2); - - /* Initialize otg part */ + /* Initialize otg part */ + if (channel->has_otg) rcar_gen3_init_otg(channel); - } return 0; } @@ -237,7 +214,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) { struct rcar_gen3_chan *channel = phy_get_drvdata(p); void __iomem *usb2_base = channel->usb2.base; - void __iomem *hsusb_base = channel->hsusb.base; u32 val; val = readl(usb2_base + USB2_USBCTR); @@ -246,33 +222,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) val &= ~USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); - /* - * TODO: To reduce power consuming, this driver should set the SUSPM - * after the PHY detects ID pin as peripheral. - */ - if (hsusb_base) { - /* Power on HSUSB PHY */ - val = readw(hsusb_base + HSUSB_LPSTS); - val |= HSUSB_LPSTS_SUSPM; - writew(val, hsusb_base + HSUSB_LPSTS); - } - - return 0; -} - -static int rcar_gen3_phy_usb2_power_off(struct phy *p) -{ - struct rcar_gen3_chan *channel = phy_get_drvdata(p); - void __iomem *hsusb_base = channel->hsusb.base; - u32 val; - - if (hsusb_base) { - /* Power off HSUSB PHY */ - val = readw(hsusb_base + HSUSB_LPSTS); - val &= ~HSUSB_LPSTS_SUSPM; - writew(val, hsusb_base + HSUSB_LPSTS); - } - return 0; } @@ -280,7 +229,6 @@ static struct phy_ops rcar_gen3_phy_usb2_ops = { .init = rcar_gen3_phy_usb2_init, .exit = rcar_gen3_phy_usb2_exit, .power_on = rcar_gen3_phy_usb2_power_on, - .power_off = rcar_gen3_phy_usb2_power_off, .owner = THIS_MODULE, }; @@ -313,6 +261,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) struct rcar_gen3_chan *channel; struct phy_provider *provider; struct resource *res; + int irq; if (!dev->of_node) { dev_err(dev, "This driver needs device tree\n"); @@ -323,29 +272,19 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (!channel) return -ENOMEM; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); channel->usb2.base = devm_ioremap_resource(dev, res); if (IS_ERR(channel->usb2.base)) return PTR_ERR(channel->usb2.base); - /* "hsusb" memory resource is optional */ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb"); - - /* To avoid error message by devm_ioremap_resource() */ - if (res) { - int irq; - - channel->hsusb.base = devm_ioremap_resource(dev, res); - if (IS_ERR(channel->hsusb.base)) - channel->hsusb.base = NULL; - /* call request_irq for OTG */ - irq = platform_get_irq(pdev, 0); - if (irq >= 0) - irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq, - IRQF_SHARED, dev_name(dev), - channel); + /* call request_irq for OTG */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq, + IRQF_SHARED, dev_name(dev), channel); if (irq < 0) dev_err(dev, "No irq handler (%d)\n", irq); + channel->has_otg = true; } /* devm_phy_create() will call pm_runtime_enable(dev); */ diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c new file mode 100644 index 000000000000..77e2d02e6bee --- /dev/null +++ b/drivers/phy/phy-rockchip-dp.c @@ -0,0 +1,151 @@ +/* + * Rockchip DP PHY driver + * + * Copyright (C) 2016 FuZhou Rockchip Co., Ltd. + * Author: Yakir Yang <ykk@@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define GRF_SOC_CON12 0x0274 + +#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20) +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4) + +#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21) +#define GRF_EDP_PHY_SIDDQ_ON 0 +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5) + +struct rockchip_dp_phy { + struct device *dev; + struct regmap *grf; + struct clk *phy_24m; +}; + +static int rockchip_set_phy_state(struct phy *phy, bool enable) +{ + struct rockchip_dp_phy *dp = phy_get_drvdata(phy); + int ret; + + if (enable) { + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_HIWORD_MASK | + GRF_EDP_PHY_SIDDQ_ON); + if (ret < 0) { + dev_err(dp->dev, "Can't enable PHY power %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(dp->phy_24m); + } else { + clk_disable_unprepare(dp->phy_24m); + + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_HIWORD_MASK | + GRF_EDP_PHY_SIDDQ_OFF); + } + + return ret; +} + +static int rockchip_dp_phy_power_on(struct phy *phy) +{ + return rockchip_set_phy_state(phy, true); +} + +static int rockchip_dp_phy_power_off(struct phy *phy) +{ + return rockchip_set_phy_state(phy, false); +} + +static const struct phy_ops rockchip_dp_phy_ops = { + .power_on = rockchip_dp_phy_power_on, + .power_off = rockchip_dp_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_dp_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct rockchip_dp_phy *dp; + struct phy *phy; + int ret; + + if (!np) + return -ENODEV; + + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); + if (IS_ERR(dp)) + return -ENOMEM; + + dp->dev = dev; + + dp->phy_24m = devm_clk_get(dev, "24m"); + if (IS_ERR(dp->phy_24m)) { + dev_err(dev, "cannot get clock 24m\n"); + return PTR_ERR(dp->phy_24m); + } + + ret = clk_set_rate(dp->phy_24m, 24000000); + if (ret < 0) { + dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret); + return ret; + } + + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(dp->grf)) { + dev_err(dev, "rk3288-dp needs rockchip,grf property\n"); + return PTR_ERR(dp->grf); + } + + ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER | + GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK); + if (ret != 0) { + dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret); + return ret; + } + + phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, dp); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_dp_phy_dt_ids[] = { + { .compatible = "rockchip,rk3288-dp-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids); + +static struct platform_driver rockchip_dp_phy_driver = { + .probe = rockchip_dp_phy_probe, + .driver = { + .name = "rockchip-dp-phy", + .of_match_table = rockchip_dp_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_dp_phy_driver); + +MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip DP PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c new file mode 100644 index 000000000000..887b4c27195f --- /dev/null +++ b/drivers/phy/phy-rockchip-emmc.c @@ -0,0 +1,229 @@ +/* + * Rockchip emmc PHY driver + * + * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com> + * Copyright (C) 2016 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* + * The higher 16-bit of this register is used for write protection + * only if BIT(x + 16) set to 1 the BIT(x) can be written. + */ +#define HIWORD_UPDATE(val, mask, shift) \ + ((val) << (shift) | (mask) << ((shift) + 16)) + +/* Register definition */ +#define GRF_EMMCPHY_CON0 0x0 +#define GRF_EMMCPHY_CON1 0x4 +#define GRF_EMMCPHY_CON2 0x8 +#define GRF_EMMCPHY_CON3 0xc +#define GRF_EMMCPHY_CON4 0x10 +#define GRF_EMMCPHY_CON5 0x14 +#define GRF_EMMCPHY_CON6 0x18 +#define GRF_EMMCPHY_STATUS 0x20 + +#define PHYCTRL_PDB_MASK 0x1 +#define PHYCTRL_PDB_SHIFT 0x0 +#define PHYCTRL_PDB_PWR_ON 0x1 +#define PHYCTRL_PDB_PWR_OFF 0x0 +#define PHYCTRL_ENDLL_MASK 0x1 +#define PHYCTRL_ENDLL_SHIFT 0x1 +#define PHYCTRL_ENDLL_ENABLE 0x1 +#define PHYCTRL_ENDLL_DISABLE 0x0 +#define PHYCTRL_CALDONE_MASK 0x1 +#define PHYCTRL_CALDONE_SHIFT 0x6 +#define PHYCTRL_CALDONE_DONE 0x1 +#define PHYCTRL_CALDONE_GOING 0x0 +#define PHYCTRL_DLLRDY_MASK 0x1 +#define PHYCTRL_DLLRDY_SHIFT 0x5 +#define PHYCTRL_DLLRDY_DONE 0x1 +#define PHYCTRL_DLLRDY_GOING 0x0 + +struct rockchip_emmc_phy { + unsigned int reg_offset; + struct regmap *reg_base; +}; + +static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, + bool on_off) +{ + unsigned int caldone; + unsigned int dllrdy; + + /* + * Keep phyctrl_pdb and phyctrl_endll low to allow + * initialization of CALIO state M/C DFFs + */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF, + PHYCTRL_PDB_MASK, + PHYCTRL_PDB_SHIFT)); + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE, + PHYCTRL_ENDLL_MASK, + PHYCTRL_ENDLL_SHIFT)); + + /* Already finish power_off above */ + if (on_off == PHYCTRL_PDB_PWR_OFF) + return 0; + + /* + * According to the user manual, calpad calibration + * cycle takes more than 2us without the minimal recommended + * value, so we may need a little margin here + */ + udelay(3); + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON, + PHYCTRL_PDB_MASK, + PHYCTRL_PDB_SHIFT)); + + /* + * According to the user manual, it asks driver to + * wait 5us for calpad busy trimming + */ + udelay(5); + regmap_read(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_STATUS, + &caldone); + caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK; + if (caldone != PHYCTRL_CALDONE_DONE) { + pr_err("rockchip_emmc_phy_power: caldone timeout.\n"); + return -ETIMEDOUT; + } + + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE, + PHYCTRL_ENDLL_MASK, + PHYCTRL_ENDLL_SHIFT)); + /* + * After enable analog DLL circuits, we need extra 10.2us + * for dll to be ready for work. + */ + udelay(11); + regmap_read(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_STATUS, + &dllrdy); + dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK; + if (dllrdy != PHYCTRL_DLLRDY_DONE) { + pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int rockchip_emmc_phy_power_off(struct phy *phy) +{ + struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); + int ret = 0; + + /* Power down emmc phy analog blocks */ + ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); + if (ret) + return ret; + + return 0; +} + +static int rockchip_emmc_phy_power_on(struct phy *phy) +{ + struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); + int ret = 0; + + /* Power up emmc phy analog blocks */ + ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); + if (ret) + return ret; + + return 0; +} + +static const struct phy_ops ops = { + .power_on = rockchip_emmc_phy_power_on, + .power_off = rockchip_emmc_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_emmc_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rockchip_emmc_phy *rk_phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct regmap *grf; + unsigned int reg_offset; + + grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); + if (IS_ERR(grf)) { + dev_err(dev, "Missing rockchip,grf property\n"); + return PTR_ERR(grf); + } + + rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); + if (!rk_phy) + return -ENOMEM; + + if (of_property_read_u32(dev->of_node, "reg", ®_offset)) { + dev_err(dev, "missing reg property in node %s\n", + dev->of_node->name); + return -EINVAL; + } + + rk_phy->reg_offset = reg_offset; + rk_phy->reg_base = grf; + + generic_phy = devm_phy_create(dev, dev->of_node, &ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, rk_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_emmc_phy_dt_ids[] = { + { .compatible = "rockchip,rk3399-emmc-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids); + +static struct platform_driver rockchip_emmc_driver = { + .probe = rockchip_emmc_phy_probe, + .driver = { + .name = "rockchip-emmc-phy", + .of_match_table = rockchip_emmc_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_emmc_driver); + +MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip EMMC PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 33a80eba1cb4..f62d899063a3 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -30,21 +30,23 @@ #include <linux/regmap.h> #include <linux/mfd/syscon.h> -/* - * The higher 16-bit of this register is used for write protection - * only if BIT(13 + 16) set to 1 the BIT(13) can be written. - */ -#define SIDDQ_WRITE_ENA BIT(29) -#define SIDDQ_ON BIT(13) -#define SIDDQ_OFF (0 << 13) +static int enable_usb_uart; + +#define HIWORD_UPDATE(val, mask) \ + ((val) | (mask) << 16) + +#define UOC_CON0_SIDDQ BIT(13) struct rockchip_usb_phys { int reg; const char *pll_name; }; +struct rockchip_usb_phy_base; struct rockchip_usb_phy_pdata { struct rockchip_usb_phys *phys; + int (*init_usb_uart)(struct regmap *grf); + int usb_uart_phy; }; struct rockchip_usb_phy_base { @@ -61,13 +63,15 @@ struct rockchip_usb_phy { struct clk *clk480m; struct clk_hw clk480m_hw; struct phy *phy; + bool uart_enabled; }; static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, bool siddq) { - return regmap_write(phy->base->reg_base, phy->reg_offset, - SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF)); + u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ); + + return regmap_write(phy->base->reg_base, phy->reg_offset, val); } static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw, @@ -108,7 +112,7 @@ static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw) if (ret < 0) return ret; - return (val & SIDDQ_ON) ? 0 : 1; + return (val & UOC_CON0_SIDDQ) ? 0 : 1; } static const struct clk_ops rockchip_usb_phy480m_ops = { @@ -122,6 +126,9 @@ static int rockchip_usb_phy_power_off(struct phy *_phy) { struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + if (phy->uart_enabled) + return -EBUSY; + clk_disable_unprepare(phy->clk480m); return 0; @@ -131,6 +138,9 @@ static int rockchip_usb_phy_power_on(struct phy *_phy) { struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + if (phy->uart_enabled) + return -EBUSY; + return clk_prepare_enable(phy->clk480m); } @@ -144,8 +154,10 @@ static void rockchip_usb_phy_action(void *data) { struct rockchip_usb_phy *rk_phy = data; - of_clk_del_provider(rk_phy->np); - clk_unregister(rk_phy->clk480m); + if (!rk_phy->uart_enabled) { + of_clk_del_provider(rk_phy->np); + clk_unregister(rk_phy->clk480m); + } if (rk_phy->clk) clk_put(rk_phy->clk); @@ -194,30 +206,35 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, return -EINVAL; } - if (rk_phy->clk) { - clk_name = __clk_get_name(rk_phy->clk); - init.flags = 0; - init.parent_names = &clk_name; - init.num_parents = 1; + if (enable_usb_uart && base->pdata->usb_uart_phy == i) { + dev_dbg(base->dev, "phy%d used as uart output\n", i); + rk_phy->uart_enabled = true; } else { - init.flags = CLK_IS_ROOT; - init.parent_names = NULL; - init.num_parents = 0; - } + if (rk_phy->clk) { + clk_name = __clk_get_name(rk_phy->clk); + init.flags = 0; + init.parent_names = &clk_name; + init.num_parents = 1; + } else { + init.flags = CLK_IS_ROOT; + init.parent_names = NULL; + init.num_parents = 0; + } - init.ops = &rockchip_usb_phy480m_ops; - rk_phy->clk480m_hw.init = &init; + init.ops = &rockchip_usb_phy480m_ops; + rk_phy->clk480m_hw.init = &init; - rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw); - if (IS_ERR(rk_phy->clk480m)) { - err = PTR_ERR(rk_phy->clk480m); - goto err_clk; - } + rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw); + if (IS_ERR(rk_phy->clk480m)) { + err = PTR_ERR(rk_phy->clk480m); + goto err_clk; + } - err = of_clk_add_provider(child, of_clk_src_simple_get, - rk_phy->clk480m); - if (err < 0) - goto err_clk_prov; + err = of_clk_add_provider(child, of_clk_src_simple_get, + rk_phy->clk480m); + if (err < 0) + goto err_clk_prov; + } err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy); if (err) @@ -230,13 +247,21 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, } phy_set_drvdata(rk_phy->phy, rk_phy); - /* only power up usb phy when it use, so disable it when init*/ - return rockchip_usb_phy_power(rk_phy, 1); + /* + * When acting as uart-pipe, just keep clock on otherwise + * only power up usb phy when it use, so disable it when init + */ + if (rk_phy->uart_enabled) + return clk_prepare_enable(rk_phy->clk); + else + return rockchip_usb_phy_power(rk_phy, 1); err_devm_action: - of_clk_del_provider(child); + if (!rk_phy->uart_enabled) + of_clk_del_provider(child); err_clk_prov: - clk_unregister(rk_phy->clk480m); + if (!rk_phy->uart_enabled) + clk_unregister(rk_phy->clk480m); err_clk: if (rk_phy->clk) clk_put(rk_phy->clk); @@ -259,6 +284,86 @@ static const struct rockchip_usb_phy_pdata rk3188_pdata = { }, }; +#define RK3288_UOC0_CON0 0x320 +#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0) +#define RK3288_UOC0_CON0_DISABLE BIT(4) + +#define RK3288_UOC0_CON2 0x328 +#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2) + +#define RK3288_UOC0_CON3 0x32c +#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0) +#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1) +#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1) +#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3) +#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3) +#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5) +#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6) +#define RK3288_UOC0_CON3_BYPASSSEL BIT(7) + +/* + * Enable the bypass of uart2 data through the otg usb phy. + * Original description in the TRM. + * 1. Disable the OTG block by setting OTGDISABLE0 to 1’b1. + * 2. Disable the pull-up resistance on the D+ line by setting + * OPMODE0[1:0] to 2’b01. + * 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend + * mode, set COMMONONN to 1’b1. + * 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1’b0. + * 5. Set BYPASSSEL0 to 1’b1. + * 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0. + * To receive data, monitor FSVPLUS0. + * + * The actual code in the vendor kernel does some things differently. + */ +static int __init rk3288_init_usb_uart(struct regmap *grf) +{ + u32 val; + int ret; + + /* + * COMMON_ON and DISABLE settings are described in the TRM, + * but were not present in the original code. + * Also disable the analog phy components to save power. + */ + val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N + | RK3288_UOC0_CON0_DISABLE + | UOC_CON0_SIDDQ, + RK3288_UOC0_CON0_COMMON_ON_N + | RK3288_UOC0_CON0_DISABLE + | UOC_CON0_SIDDQ); + ret = regmap_write(grf, RK3288_UOC0_CON0, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL, + RK3288_UOC0_CON2_SOFT_CON_SEL); + ret = regmap_write(grf, RK3288_UOC0_CON2, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING + | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC + | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED, + RK3288_UOC0_CON3_UTMI_SUSPENDN + | RK3288_UOC0_CON3_UTMI_OPMODE_MASK + | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK + | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED); + ret = regmap_write(grf, RK3288_UOC0_CON3, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL + | RK3288_UOC0_CON3_BYPASSDMEN, + RK3288_UOC0_CON3_BYPASSSEL + | RK3288_UOC0_CON3_BYPASSDMEN); + ret = regmap_write(grf, RK3288_UOC0_CON3, val); + if (ret) + return ret; + + return 0; +} + static const struct rockchip_usb_phy_pdata rk3288_pdata = { .phys = (struct rockchip_usb_phys[]){ { .reg = 0x320, .pll_name = "sclk_otgphy0_480m" }, @@ -266,6 +371,8 @@ static const struct rockchip_usb_phy_pdata rk3288_pdata = { { .reg = 0x348, .pll_name = "sclk_otgphy2_480m" }, { /* sentinel */ } }, + .init_usb_uart = rk3288_init_usb_uart, + .usb_uart_phy = 0, }; static int rockchip_usb_phy_probe(struct platform_device *pdev) @@ -328,6 +435,60 @@ static struct platform_driver rockchip_usb_driver = { module_platform_driver(rockchip_usb_driver); +#ifndef MODULE +static int __init rockchip_init_usb_uart(void) +{ + const struct of_device_id *match; + const struct rockchip_usb_phy_pdata *data; + struct device_node *np; + struct regmap *grf; + int ret; + + if (!enable_usb_uart) + return 0; + + np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids, + &match); + if (!np) { + pr_err("%s: failed to find usbphy node\n", __func__); + return -ENOTSUPP; + } + + pr_debug("%s: using settings for %s\n", __func__, match->compatible); + data = match->data; + + if (!data->init_usb_uart) { + pr_err("%s: usb-uart not available on %s\n", + __func__, match->compatible); + return -ENOTSUPP; + } + + grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(grf)) { + pr_err("%s: Missing rockchip,grf property, %lu\n", + __func__, PTR_ERR(grf)); + return PTR_ERR(grf); + } + + ret = data->init_usb_uart(grf); + if (ret) { + pr_err("%s: could not init usb_uart, %d\n", __func__, ret); + enable_usb_uart = 0; + return ret; + } + + return 0; +} +early_initcall(rockchip_init_usb_uart); + +static int __init rockchip_usb_uart(char *buf) +{ + enable_usb_uart = true; + return 0; +} +early_param("rockchip.usb_uart", rockchip_usb_uart); +#endif + MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>"); MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver"); MODULE_LICENSE("GPL v2"); |