diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/ahci.c | |
download | linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/ahci.c')
-rw-r--r-- | drivers/scsi/ahci.c | 1065 |
1 files changed, 1065 insertions, 0 deletions
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c new file mode 100644 index 000000000000..3a15b13e747a --- /dev/null +++ b/drivers/scsi/ahci.c @@ -0,0 +1,1065 @@ +/* + * ahci.c - AHCI SATA support + * + * Copyright 2004 Red Hat, Inc. + * + * The contents of this file are subject to the Open + * Software License version 1.1 that can be found at + * http://www.opensource.org/licenses/osl-1.1.txt and is included herein + * by reference. + * + * Alternatively, the contents of this file may be used under the terms + * of the GNU General Public License version 2 (the "GPL") as distributed + * in the kernel source COPYING file, in which case the provisions of + * the GPL are applicable instead of the above. If you wish to allow + * the use of your version of this file only under the terms of the + * GPL and not to allow others to use your version of this file under + * the OSL, indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by the GPL. + * If you do not delete the provisions above, a recipient may use your + * version of this file under either the OSL or the GPL. + * + * Version 1.0 of the AHCI specification: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include "scsi.h" +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <asm/io.h> + +#define DRV_NAME "ahci" +#define DRV_VERSION "1.00" + + +enum { + AHCI_PCI_BAR = 5, + AHCI_MAX_SG = 168, /* hardware max is 64K */ + AHCI_DMA_BOUNDARY = 0xffffffff, + AHCI_USE_CLUSTERING = 0, + AHCI_CMD_SLOT_SZ = 32 * 32, + AHCI_RX_FIS_SZ = 256, + AHCI_CMD_TBL_HDR = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16), + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ + + AHCI_RX_FIS_SZ, + AHCI_IRQ_ON_SG = (1 << 31), + AHCI_CMD_ATAPI = (1 << 5), + AHCI_CMD_WRITE = (1 << 6), + + RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ + + board_ahci = 0, + + /* global controller registers */ + HOST_CAP = 0x00, /* host capabilities */ + HOST_CTL = 0x04, /* global host control */ + HOST_IRQ_STAT = 0x08, /* interrupt status */ + HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ + HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ + + /* HOST_CTL bits */ + HOST_RESET = (1 << 0), /* reset controller; self-clear */ + HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ + HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ + + /* HOST_CAP bits */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + + /* registers for each SATA port */ + PORT_LST_ADDR = 0x00, /* command list DMA addr */ + PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ + PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ + PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ + PORT_IRQ_STAT = 0x10, /* interrupt status */ + PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ + PORT_CMD = 0x18, /* port command */ + PORT_TFDATA = 0x20, /* taskfile data */ + PORT_SIG = 0x24, /* device TF signature */ + PORT_CMD_ISSUE = 0x38, /* command issue */ + PORT_SCR = 0x28, /* SATA phy register block */ + PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ + PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ + PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ + PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ + + /* PORT_IRQ_{STAT,MASK} bits */ + PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ + PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ + PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ + PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ + PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ + PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ + PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ + PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ + + PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ + PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ + PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ + PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ + PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ + PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ + PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ + PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ + PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ + + PORT_IRQ_FATAL = PORT_IRQ_TF_ERR | + PORT_IRQ_HBUS_ERR | + PORT_IRQ_HBUS_DATA_ERR | + PORT_IRQ_IF_ERR, + DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY | + PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE | + PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS | + PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS | + PORT_IRQ_D2H_REG_FIS, + + /* PORT_CMD bits */ + PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ + PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ + PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ + PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ + PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ + PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ + + PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ + PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ + PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ +}; + +struct ahci_cmd_hdr { + u32 opts; + u32 status; + u32 tbl_addr; + u32 tbl_addr_hi; + u32 reserved[4]; +}; + +struct ahci_sg { + u32 addr; + u32 addr_hi; + u32 reserved; + u32 flags_size; +}; + +struct ahci_host_priv { + unsigned long flags; + u32 cap; /* cache of HOST_CAP register */ + u32 port_map; /* cache of HOST_PORTS_IMPL reg */ +}; + +struct ahci_port_priv { + struct ahci_cmd_hdr *cmd_slot; + dma_addr_t cmd_slot_dma; + void *cmd_tbl; + dma_addr_t cmd_tbl_dma; + struct ahci_sg *cmd_tbl_sg; + void *rx_fis; + dma_addr_t rx_fis_dma; +}; + +static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static int ahci_qc_issue(struct ata_queued_cmd *qc); +static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); +static void ahci_phy_reset(struct ata_port *ap); +static void ahci_irq_clear(struct ata_port *ap); +static void ahci_eng_timeout(struct ata_port *ap); +static int ahci_port_start(struct ata_port *ap); +static void ahci_port_stop(struct ata_port *ap); +static void ahci_host_stop(struct ata_host_set *host_set); +static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); +static void ahci_qc_prep(struct ata_queued_cmd *qc); +static u8 ahci_check_status(struct ata_port *ap); +static u8 ahci_check_err(struct ata_port *ap); +static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); + +static Scsi_Host_Template ahci_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = AHCI_MAX_SG, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = AHCI_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = AHCI_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, +}; + +static struct ata_port_operations ahci_ops = { + .port_disable = ata_port_disable, + + .check_status = ahci_check_status, + .check_altstatus = ahci_check_status, + .check_err = ahci_check_err, + .dev_select = ata_noop_dev_select, + + .tf_read = ahci_tf_read, + + .phy_reset = ahci_phy_reset, + + .qc_prep = ahci_qc_prep, + .qc_issue = ahci_qc_issue, + + .eng_timeout = ahci_eng_timeout, + + .irq_handler = ahci_interrupt, + .irq_clear = ahci_irq_clear, + + .scr_read = ahci_scr_read, + .scr_write = ahci_scr_write, + + .port_start = ahci_port_start, + .port_stop = ahci_port_stop, + .host_stop = ahci_host_stop, +}; + +static struct ata_port_info ahci_port_info[] = { + /* board_ahci */ + { + .sht = &ahci_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA, + .pio_mask = 0x03, /* pio3-4 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &ahci_ops, + }, +}; + +static struct pci_device_id ahci_pci_tbl[] = { + { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH6 */ + { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH6M */ + { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7 */ + { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7M */ + { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7R */ + { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ULi M5288 */ + { } /* terminate list */ +}; + + +static struct pci_driver ahci_pci_driver = { + .name = DRV_NAME, + .id_table = ahci_pci_tbl, + .probe = ahci_init_one, + .remove = ata_pci_remove_one, +}; + + +static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port) +{ + return base + 0x100 + (port * 0x80); +} + +static inline void *ahci_port_base (void *base, unsigned int port) +{ + return (void *) ahci_port_base_ul((unsigned long)base, port); +} + +static void ahci_host_stop(struct ata_host_set *host_set) +{ + struct ahci_host_priv *hpriv = host_set->private_data; + kfree(hpriv); +} + +static int ahci_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct ahci_host_priv *hpriv = ap->host_set->private_data; + struct ahci_port_priv *pp; + int rc; + void *mem, *mmio = ap->host_set->mmio_base; + void *port_mmio = ahci_port_base(mmio, ap->port_no); + dma_addr_t mem_dma; + + rc = ata_port_start(ap); + if (rc) + return rc; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + rc = -ENOMEM; + goto err_out; + } + memset(pp, 0, sizeof(*pp)); + + mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); + if (!mem) { + rc = -ENOMEM; + goto err_out_kfree; + } + memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += AHCI_RX_FIS_SZ; + mem_dma += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR; + + ap->private_data = pp; + + if (hpriv->cap & HOST_CAP_64) + writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); + writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); + readl(port_mmio + PORT_LST_ADDR); /* flush */ + + if (hpriv->cap & HOST_CAP_64) + writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); + writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); + readl(port_mmio + PORT_FIS_ADDR); /* flush */ + + writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | + PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | + PORT_CMD_START, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + + return 0; + +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + + +static void ahci_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct ahci_port_priv *pp = ap->private_data; + void *mmio = ap->host_set->mmio_base; + void *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX); + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + + /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so + * this is slightly incorrect. + */ + msleep(500); + + ap->private_data = NULL; + dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, + pp->cmd_slot, pp->cmd_slot_dma); + kfree(pp); + ata_port_stop(ap); +} + +static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) +{ + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: sc_reg = 0; break; + case SCR_CONTROL: sc_reg = 1; break; + case SCR_ERROR: sc_reg = 2; break; + case SCR_ACTIVE: sc_reg = 3; break; + default: + return 0xffffffffU; + } + + return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, + u32 val) +{ + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: sc_reg = 0; break; + case SCR_CONTROL: sc_reg = 1; break; + case SCR_ERROR: sc_reg = 2; break; + case SCR_ACTIVE: sc_reg = 3; break; + default: + return; + } + + writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + +static void ahci_phy_reset(struct ata_port *ap) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + struct ata_taskfile tf; + struct ata_device *dev = &ap->device[0]; + u32 tmp; + + __sata_phy_reset(ap); + + if (ap->flags & ATA_FLAG_PORT_DISABLED) + return; + + tmp = readl(port_mmio + PORT_SIG); + tf.lbah = (tmp >> 24) & 0xff; + tf.lbam = (tmp >> 16) & 0xff; + tf.lbal = (tmp >> 8) & 0xff; + tf.nsect = (tmp) & 0xff; + + dev->class = ata_dev_classify(&tf); + if (!ata_dev_present(dev)) + ata_port_disable(ap); +} + +static u8 ahci_check_status(struct ata_port *ap) +{ + void *mmio = (void *) ap->ioaddr.cmd_addr; + + return readl(mmio + PORT_TFDATA) & 0xFF; +} + +static u8 ahci_check_err(struct ata_port *ap) +{ + void *mmio = (void *) ap->ioaddr.cmd_addr; + + return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF; +} + +static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + + ata_tf_from_fis(d2h_fis, tf); +} + +static void ahci_fill_sg(struct ata_queued_cmd *qc) +{ + struct ahci_port_priv *pp = qc->ap->private_data; + unsigned int i; + + VPRINTK("ENTER\n"); + + /* + * Next, the S/G list. + */ + for (i = 0; i < qc->n_elem; i++) { + u32 sg_len; + dma_addr_t addr; + + addr = sg_dma_address(&qc->sg[i]); + sg_len = sg_dma_len(&qc->sg[i]); + + pp->cmd_tbl_sg[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->cmd_tbl_sg[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + pp->cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len - 1); + } +} + +static void ahci_qc_prep(struct ata_queued_cmd *qc) +{ + struct ahci_port_priv *pp = qc->ap->private_data; + u32 opts; + const u32 cmd_fis_len = 5; /* five dwords */ + + /* + * Fill in command slot information (currently only one slot, + * slot 0, is currently since we don't do queueing) + */ + + opts = (qc->n_elem << 16) | cmd_fis_len; + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + case ATA_PROT_ATAPI_DMA: + opts |= AHCI_CMD_ATAPI; + break; + + default: + /* do nothing */ + break; + } + + pp->cmd_slot[0].opts = cpu_to_le32(opts); + pp->cmd_slot[0].status = 0; + pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); + + /* + * Fill in command table information. First, the header, + * a SATA Register - Host to Device command FIS. + */ + ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ahci_fill_sg(qc); +} + +static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) +{ + void *mmio = ap->host_set->mmio_base; + void *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + int work; + + /* stop DMA */ + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for engine to stop. TODO: this could be + * as long as 500 msec + */ + work = 1000; + while (work-- > 0) { + tmp = readl(port_mmio + PORT_CMD); + if ((tmp & PORT_CMD_LIST_ON) == 0) + break; + udelay(10); + } + + /* clear SATA phy error, if any */ + tmp = readl(port_mmio + PORT_SCR_ERR); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* if DRQ/BSY is set, device needs to be reset. + * if so, issue COMRESET + */ + tmp = readl(port_mmio + PORT_TFDATA); + if (tmp & (ATA_BUSY | ATA_DRQ)) { + writel(0x301, port_mmio + PORT_SCR_CTL); + readl(port_mmio + PORT_SCR_CTL); /* flush */ + udelay(10); + writel(0x300, port_mmio + PORT_SCR_CTL); + readl(port_mmio + PORT_SCR_CTL); /* flush */ + } + + /* re-start DMA */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + + printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id); +} + +static void ahci_eng_timeout(struct ata_port *ap) +{ + void *mmio = ap->host_set->mmio_base; + void *port_mmio = ahci_port_base(mmio, ap->port_no); + struct ata_queued_cmd *qc; + + DPRINTK("ENTER\n"); + + ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (!qc) { + printk(KERN_ERR "ata%u: BUG: timeout without command\n", + ap->id); + } else { + /* hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + } + +} + +static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + void *mmio = ap->host_set->mmio_base; + void *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 status, serr, ci; + + serr = readl(port_mmio + PORT_SCR_ERR); + writel(serr, port_mmio + PORT_SCR_ERR); + + status = readl(port_mmio + PORT_IRQ_STAT); + writel(status, port_mmio + PORT_IRQ_STAT); + + ci = readl(port_mmio + PORT_CMD_ISSUE); + if (likely((ci & 0x1) == 0)) { + if (qc) { + ata_qc_complete(qc, 0); + qc = NULL; + } + } + + if (status & PORT_IRQ_FATAL) { + ahci_intr_error(ap, status); + if (qc) + ata_qc_complete(qc, ATA_ERR); + } + + return 1; +} + +static void ahci_irq_clear(struct ata_port *ap) +{ + /* TODO */ +} + +static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct ahci_host_priv *hpriv; + unsigned int i, handled = 0; + void *mmio; + u32 irq_stat, irq_ack = 0; + + VPRINTK("ENTER\n"); + + hpriv = host_set->private_data; + mmio = host_set->mmio_base; + + /* sigh. 0xffffffff is a valid return from h/w */ + irq_stat = readl(mmio + HOST_IRQ_STAT); + irq_stat &= hpriv->port_map; + if (!irq_stat) + return IRQ_NONE; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap; + u32 tmp; + + VPRINTK("port %u\n", i); + ap = host_set->ports[i]; + tmp = irq_stat & (1 << i); + if (tmp && ap) { + struct ata_queued_cmd *qc; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (ahci_host_intr(ap, qc)) + irq_ack |= (1 << i); + } + } + + if (irq_ack) { + writel(irq_ack, mmio + HOST_IRQ_STAT); + handled = 1; + } + + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static int ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void *port_mmio = (void *) ap->ioaddr.cmd_addr; + + writel(1, port_mmio + PORT_SCR_ACT); + readl(port_mmio + PORT_SCR_ACT); /* flush */ + + writel(1, port_mmio + PORT_CMD_ISSUE); + readl(port_mmio + PORT_CMD_ISSUE); /* flush */ + + return 0; +} + +static void ahci_setup_port(struct ata_ioports *port, unsigned long base, + unsigned int port_idx) +{ + VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx); + base = ahci_port_base_ul(base, port_idx); + VPRINTK("base now==0x%lx\n", base); + + port->cmd_addr = base; + port->scr_addr = base + PORT_SCR; + + VPRINTK("EXIT\n"); +} + +static int ahci_host_init(struct ata_probe_ent *probe_ent) +{ + struct ahci_host_priv *hpriv = probe_ent->private_data; + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + void __iomem *mmio = probe_ent->mmio_base; + u32 tmp, cap_save; + u16 tmp16; + unsigned int i, j, using_dac; + int rc; + void __iomem *port_mmio; + + cap_save = readl(mmio + HOST_CAP); + cap_save &= ( (1<<28) | (1<<17) ); + cap_save |= (1 << 27); + + /* global controller reset */ + tmp = readl(mmio + HOST_CTL); + if ((tmp & HOST_RESET) == 0) { + writel(tmp | HOST_RESET, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + /* reset must complete within 1 second, or + * the hardware should be considered fried. + */ + ssleep(1); + + tmp = readl(mmio + HOST_CTL); + if (tmp & HOST_RESET) { + printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n", + pci_name(pdev), tmp); + return -EIO; + } + + writel(HOST_AHCI_EN, mmio + HOST_CTL); + (void) readl(mmio + HOST_CTL); /* flush */ + writel(cap_save, mmio + HOST_CAP); + writel(0xf, mmio + HOST_PORTS_IMPL); + (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ + + pci_read_config_word(pdev, 0x92, &tmp16); + tmp16 |= 0xf; + pci_write_config_word(pdev, 0x92, tmp16); + + hpriv->cap = readl(mmio + HOST_CAP); + hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); + probe_ent->n_ports = (hpriv->cap & 0x1f) + 1; + + VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n", + hpriv->cap, hpriv->port_map, probe_ent->n_ports); + + using_dac = hpriv->cap & HOST_CAP_64; + if (using_dac && + !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n", + pci_name(pdev)); + return rc; + } + } + + hpriv->flags |= HOST_CAP_64; + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + return rc; + } + } + + for (i = 0; i < probe_ent->n_ports; i++) { +#if 0 /* BIOSen initialize this incorrectly */ + if (!(hpriv->port_map & (1 << i))) + continue; +#endif + + port_mmio = ahci_port_base(mmio, i); + VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio); + + ahci_setup_port(&probe_ent->port[i], + (unsigned long) mmio, i); + + /* make sure port is not active */ + tmp = readl(port_mmio + PORT_CMD); + VPRINTK("PORT_CMD 0x%x\n", tmp); + if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | + PORT_CMD_FIS_RX | PORT_CMD_START)) { + tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | + PORT_CMD_FIS_RX | PORT_CMD_START); + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + + /* spec says 500 msecs for each bit, so + * this is slightly incorrect. + */ + msleep(500); + } + + writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); + + j = 0; + while (j < 100) { + msleep(10); + tmp = readl(port_mmio + PORT_SCR_STAT); + if ((tmp & 0xf) == 0x3) + break; + j++; + } + + tmp = readl(port_mmio + PORT_SCR_ERR); + VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* ack any pending irq events for this port */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << i, mmio + HOST_IRQ_STAT); + + /* set irq mask (enables interrupts) */ + writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); + } + + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); + + pci_set_master(pdev); + + return 0; +} + +/* move to PCI layer, integrate w/ MSI stuff */ +static void pci_enable_intx(struct pci_dev *pdev) +{ + u16 pci_command; + + pci_read_config_word(pdev, PCI_COMMAND, &pci_command); + if (pci_command & PCI_COMMAND_INTX_DISABLE) { + pci_command &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(pdev, PCI_COMMAND, pci_command); + } +} + +static void ahci_print_info(struct ata_probe_ent *probe_ent) +{ + struct ahci_host_priv *hpriv = probe_ent->private_data; + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + void *mmio = probe_ent->mmio_base; + u32 vers, cap, impl, speed; + const char *speed_s; + u16 cc; + const char *scc_s; + + vers = readl(mmio + HOST_VERSION); + cap = hpriv->cap; + impl = hpriv->port_map; + + speed = (cap >> 20) & 0xf; + if (speed == 1) + speed_s = "1.5"; + else if (speed == 2) + speed_s = "3"; + else + speed_s = "?"; + + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == 0x0101) + scc_s = "IDE"; + else if (cc == 0x0106) + scc_s = "SATA"; + else if (cc == 0x0104) + scc_s = "RAID"; + else + scc_s = "unknown"; + + printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x " + "%u slots %u ports %s Gbps 0x%x impl %s mode\n" + , + pci_name(pdev), + + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, + + ((cap >> 8) & 0x1f) + 1, + (cap & 0x1f) + 1, + speed_s, + impl, + scc_s); + + printk(KERN_INFO DRV_NAME "(%s) flags: " + "%s%s%s%s%s%s" + "%s%s%s%s%s%s%s\n" + , + pci_name(pdev), + + cap & (1 << 31) ? "64bit " : "", + cap & (1 << 30) ? "ncq " : "", + cap & (1 << 28) ? "ilck " : "", + cap & (1 << 27) ? "stag " : "", + cap & (1 << 26) ? "pm " : "", + cap & (1 << 25) ? "led " : "", + + cap & (1 << 24) ? "clo " : "", + cap & (1 << 19) ? "nz " : "", + cap & (1 << 18) ? "only " : "", + cap & (1 << 17) ? "pmp " : "", + cap & (1 << 15) ? "pio " : "", + cap & (1 << 14) ? "slum " : "", + cap & (1 << 13) ? "part " : "" + ); +} + +static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + struct ahci_host_priv *hpriv; + unsigned long base; + void *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int pci_dev_busy = 0; + int rc; + + VPRINTK("ENTER\n"); + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + pci_enable_intx(pdev); + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = ioremap(pci_resource_start(pdev, AHCI_PCI_BAR), + pci_resource_len(pdev, AHCI_PCI_BAR)); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + base = (unsigned long) mmio_base; + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) { + rc = -ENOMEM; + goto err_out_iounmap; + } + memset(hpriv, 0, sizeof(*hpriv)); + + probe_ent->sht = ahci_port_info[board_idx].sht; + probe_ent->host_flags = ahci_port_info[board_idx].host_flags; + probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask; + probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask; + probe_ent->port_ops = ahci_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + probe_ent->private_data = hpriv; + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out_hpriv; + + ahci_print_info(probe_ent); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_hpriv: + kfree(hpriv); +err_out_iounmap: + iounmap(mmio_base); +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + + +static int __init ahci_init(void) +{ + return pci_module_init(&ahci_pci_driver); +} + + +static void __exit ahci_exit(void) +{ + pci_unregister_driver(&ahci_pci_driver); +} + + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("AHCI SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); + +module_init(ahci_init); +module_exit(ahci_exit); |