libsas: use ata_dev_classify()

Use the ata device class from libata in libsas instead of checking
the supported command set and switch to using ata_dev_classify()
instead of our own method.

Cc: Tejun Heo <tj@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 11 insertions, 55 deletions

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 766098af4eb7..9f68db7ed5f1 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -138,7 +138,7 @@ static void sas_ata_task_done(struct sas_task *task)
 
 	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
 	    ((stat->stat == SAM_STAT_CHECK_CONDITION &&
-	      dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
+	      dev->sata_dev.class == ATA_DEV_ATAPI))) {
 		memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
 
 		if (!link->sactive) {
@@ -278,7 +278,7 @@ static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
 	return to_sas_internal(dev->port->ha->core.shost->transportt);
 }
 
-static void sas_get_ata_command_set(struct domain_device *dev);
+static int sas_get_ata_command_set(struct domain_device *dev);
 
 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 {
@@ -303,8 +303,7 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 		}
 		memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
 		       sizeof(struct dev_to_host_fis));
-		/* TODO switch to ata_dev_classify() */
-		sas_get_ata_command_set(dev);
+		dev->sata_dev.class = sas_get_ata_command_set(dev);
 	}
 	return 0;
 }
@@ -425,18 +424,7 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
 	if (ret && ret != -EAGAIN)
 		sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret);
 
-	/* XXX: if the class changes during the reset the upper layer
-	 * should be informed, if the device has gone away we assume
-	 * libsas will eventually delete it
-	 */
-	switch (dev->sata_dev.command_set) {
-	case ATA_COMMAND_SET:
-		*class = ATA_DEV_ATA;
-		break;
-	case ATAPI_COMMAND_SET:
-		*class = ATA_DEV_ATAPI;
-		break;
-	}
+	*class = dev->sata_dev.class;
 
 	ap->cbl = ATA_CBL_SATA;
 	return ret;
@@ -626,50 +614,18 @@ void sas_ata_task_abort(struct sas_task *task)
 	complete(waiting);
 }
 
-static void sas_get_ata_command_set(struct domain_device *dev)
+static int sas_get_ata_command_set(struct domain_device *dev)
 {
 	struct dev_to_host_fis *fis =
 		(struct dev_to_host_fis *) dev->frame_rcvd;
+	struct ata_taskfile tf;
 
 	if (dev->dev_type == SAS_SATA_PENDING)
-		return;
+		return ATA_DEV_UNKNOWN;
+
+	ata_tf_from_fis((const u8 *)fis, &tf);
 
-	if ((fis->sector_count == 1 && /* ATA */
-	     fis->lbal         == 1 &&
-	     fis->lbam         == 0 &&
-	     fis->lbah         == 0 &&
-	     fis->device       == 0)
-	    ||
-	    (fis->sector_count == 0 && /* CE-ATA (mATA) */
-	     fis->lbal         == 0 &&
-	     fis->lbam         == 0xCE &&
-	     fis->lbah         == 0xAA &&
-	     (fis->device & ~0x10) == 0))
-
-		dev->sata_dev.command_set = ATA_COMMAND_SET;
-
-	else if ((fis->interrupt_reason == 1 &&	/* ATAPI */
-		  fis->lbal             == 1 &&
-		  fis->byte_count_low   == 0x14 &&
-		  fis->byte_count_high  == 0xEB &&
-		  (fis->device & ~0x10) == 0))
-
-		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
-
-	else if ((fis->sector_count == 1 && /* SEMB */
-		  fis->lbal         == 1 &&
-		  fis->lbam         == 0x3C &&
-		  fis->lbah         == 0xC3 &&
-		  fis->device       == 0)
-		||
-		 (fis->interrupt_reason == 1 &&	/* SATA PM */
-		  fis->lbal             == 1 &&
-		  fis->byte_count_low   == 0x69 &&
-		  fis->byte_count_high  == 0x96 &&
-		  (fis->device & ~0x10) == 0))
-
-		/* Treat it as a superset? */
-		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+	return ata_dev_classify(&tf);
 }
 
 void sas_probe_sata(struct asd_sas_port *port)
@@ -775,7 +731,7 @@ int sas_discover_sata(struct domain_device *dev)
 	if (dev->dev_type == SAS_SATA_PM)
 		return -ENODEV;
 
-	sas_get_ata_command_set(dev);
+	dev->sata_dev.class = sas_get_ata_command_set(dev);
 	sas_fill_in_rphy(dev, dev->rphy);
 
 	res = sas_notify_lldd_dev_found(dev);