diff options
author | Ranjan Kumar <ranjan.kumar@broadcom.com> | 2023-08-29 14:30:19 +0530 |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2023-08-30 21:39:06 -0400 |
commit | 4ca10f3e31745d35249a727ecd108eb58f0a8c5e (patch) | |
tree | 2893b4292081cd990622ca4f296c436e9efd83bd /drivers/scsi | |
parent | be946e31bcf2b1c01f1af443c238bc15fe9f6294 (diff) | |
download | linux-stable-4ca10f3e31745d35249a727ecd108eb58f0a8c5e.tar.gz linux-stable-4ca10f3e31745d35249a727ecd108eb58f0a8c5e.tar.bz2 linux-stable-4ca10f3e31745d35249a727ecd108eb58f0a8c5e.zip |
scsi: mpt3sas: Perform additional retries if doorbell read returns 0
The driver retries certain register reads 3 times if the returned value is
0. This was done because the controller could return 0 for certain
registers if other registers were being accessed concurrently by the BMC.
In certain systems with increased BMC interactions, the register values
returned can be 0 for longer than 3 retries. Change the retry count from 3
to 30 for the affected registers to prevent problems with out-of-band
management.
Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 46 | ||||
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.h | 1 |
2 files changed, 34 insertions, 13 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 53f5492579cb..5284584e4cd2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -138,6 +138,9 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc); static void _base_clear_outstanding_commands(struct MPT3SAS_ADAPTER *ioc); +static u32 +_base_readl_ext_retry(const volatile void __iomem *addr); + /** * mpt3sas_base_check_cmd_timeout - Function * to check timeout and command termination due @@ -213,6 +216,20 @@ _base_readl_aero(const volatile void __iomem *addr) return ret_val; } +static u32 +_base_readl_ext_retry(const volatile void __iomem *addr) +{ + u32 i, ret_val; + + for (i = 0 ; i < 30 ; i++) { + ret_val = readl(addr); + if (ret_val == 0) + continue; + } + + return ret_val; +} + static inline u32 _base_readl(const volatile void __iomem *addr) { @@ -940,7 +957,7 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) dump_stack(); - doorbell = ioc->base_readl(&ioc->chip->Doorbell); + doorbell = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt3sas_print_fault_code(ioc, doorbell & MPI2_DOORBELL_DATA_MASK); @@ -6686,7 +6703,7 @@ mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked) { u32 s, sc; - s = ioc->base_readl(&ioc->chip->Doorbell); + s = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); sc = s & MPI2_IOC_STATE_MASK; return cooked ? sc : s; } @@ -6831,7 +6848,7 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout) __func__, count, timeout)); return 0; } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { - doorbell = ioc->base_readl(&ioc->chip->Doorbell); + doorbell = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt3sas_print_fault_code(ioc, doorbell); @@ -6871,7 +6888,7 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout) count = 0; cntdn = 1000 * timeout; do { - doorbell_reg = ioc->base_readl(&ioc->chip->Doorbell); + doorbell_reg = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); if (!(doorbell_reg & MPI2_DOORBELL_USED)) { dhsprintk(ioc, ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", @@ -7019,7 +7036,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, __le32 *mfp; /* make sure doorbell is not in use */ - if ((ioc->base_readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + if ((ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { ioc_err(ioc, "doorbell is in use (line=%d)\n", __LINE__); return -EFAULT; } @@ -7068,7 +7085,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, } /* read the first two 16-bits, it gives the total length of the reply */ - reply[0] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) + reply[0] = le16_to_cpu(ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); if ((_base_wait_for_doorbell_int(ioc, 5))) { @@ -7076,7 +7093,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, __LINE__); return -EFAULT; } - reply[1] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) + reply[1] = le16_to_cpu(ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); @@ -7087,10 +7104,10 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, return -EFAULT; } if (i >= reply_bytes/2) /* overflow case */ - ioc->base_readl(&ioc->chip->Doorbell); + ioc->base_readl_ext_retry(&ioc->chip->Doorbell); else reply[i] = le16_to_cpu( - ioc->base_readl(&ioc->chip->Doorbell) + ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); } @@ -7949,7 +7966,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) goto out; } - host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic); drsprintk(ioc, ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", count, host_diagnostic)); @@ -7969,7 +7986,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) for (count = 0; count < (300000000 / MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { - host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic); if (host_diagnostic == 0xFFFFFFFF) { ioc_info(ioc, @@ -8359,10 +8376,13 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->rdpq_array_enable_assigned = 0; ioc->use_32bit_dma = false; ioc->dma_mask = 64; - if (ioc->is_aero_ioc) + if (ioc->is_aero_ioc) { ioc->base_readl = &_base_readl_aero; - else + ioc->base_readl_ext_retry = &_base_readl_ext_retry; + } else { ioc->base_readl = &_base_readl; + ioc->base_readl_ext_retry = &_base_readl; + } r = mpt3sas_base_map_resources(ioc); if (r) goto out_free_resources; diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 05364aa15ecd..10055c7e4a9f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1618,6 +1618,7 @@ struct MPT3SAS_ADAPTER { u8 diag_trigger_active; u8 atomic_desc_capable; BASE_READ_REG base_readl; + BASE_READ_REG base_readl_ext_retry; struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event; struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi; |