diff options
| author | Heiner Kallweit <hkallweit1@gmail.com> | 2016-11-09 22:58:34 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2016-11-11 16:00:01 +0000 |
| commit | 8263cb33c8636e4b333d97ef5995a2b484ea48ea (patch) | |
| tree | 9321bbc7547bca95086f242fc8b72c6553a17a84 /drivers/spi/spi-fsl-espi.c | |
| parent | aca75157d9beb7b171a178446ecdb4d047b9f934 (diff) | |
| download | linux-stable-8263cb33c8636e4b333d97ef5995a2b484ea48ea.tar.gz linux-stable-8263cb33c8636e4b333d97ef5995a2b484ea48ea.tar.bz2 linux-stable-8263cb33c8636e4b333d97ef5995a2b484ea48ea.zip | |
spi: fsl-espi: add support for dual output read mode
This patch adds support for dual output read mode.
It was successfully tested on a P1014-based device with S25FL128S
SPINOR flash. With 50MHz SPI clock the read rate is 11MByte/s.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-fsl-espi.c')
| -rw-r--r-- | drivers/spi/spi-fsl-espi.c | 13 |
1 files changed, 12 insertions, 1 deletions
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 9ccbfbc75933..6624c5a06ffc 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -334,6 +334,8 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) mpc8xxx_spi->tx_len = mpc8xxx_spi->rxskip; mpc8xxx_spi->rx_len = t->len - mpc8xxx_spi->rxskip; mpc8xxx_spi->rx = t->rx_buf + mpc8xxx_spi->rxskip; + if (t->rx_nbits == SPI_NBITS_DUAL) + spcom |= SPCOM_DO; } fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPCOM, spcom); @@ -369,6 +371,11 @@ static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans) int ret; mspi->rxskip = fsl_espi_check_rxskip_mode(m); + if (trans->rx_nbits == SPI_NBITS_DUAL && !mspi->rxskip) { + dev_err(mspi->dev, "Dual output mode requires RXSKIP mode!\n"); + return -EINVAL; + } + fsl_espi_copy_to_buf(m, mspi); fsl_espi_setup_transfer(spi, trans); @@ -387,7 +394,7 @@ static int fsl_espi_do_one_msg(struct spi_master *master, struct spi_message *m) { struct mpc8xxx_spi *mspi = spi_master_get_devdata(m->spi->master); - unsigned int delay_usecs = 0; + unsigned int delay_usecs = 0, rx_nbits = 0; struct spi_transfer *t, trans = {}; int ret; @@ -398,6 +405,8 @@ static int fsl_espi_do_one_msg(struct spi_master *master, list_for_each_entry(t, &m->transfers, transfer_list) { if (t->delay_usecs > delay_usecs) delay_usecs = t->delay_usecs; + if (t->rx_nbits > rx_nbits) + rx_nbits = t->rx_nbits; } t = list_first_entry(&m->transfers, struct spi_transfer, @@ -409,6 +418,7 @@ static int fsl_espi_do_one_msg(struct spi_master *master, trans.delay_usecs = delay_usecs; trans.tx_buf = mspi->local_buf; trans.rx_buf = mspi->local_buf; + trans.rx_nbits = rx_nbits; if (trans.len) ret = fsl_espi_trans(m, &trans); @@ -580,6 +590,7 @@ static int fsl_espi_probe(struct device *dev, struct resource *mem, mpc8xxx_spi_probe(dev, mem, irq); + master->mode_bits |= SPI_RX_DUAL; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); master->setup = fsl_espi_setup; master->cleanup = fsl_espi_cleanup; |