diff options
author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2017-01-15 23:32:52 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-01-19 14:38:57 +0100 |
commit | 8c9faa556a37e62799fd22d7409386b1b8ddd4e7 (patch) | |
tree | d63fbd9e1a31b17f7e618943eeb7c06678346cee /drivers/tty/serial/meson_uart.c | |
parent | 9ed90d20449b01beb71a4e125d291a36c80c4ad4 (diff) | |
download | linux-stable-8c9faa556a37e62799fd22d7409386b1b8ddd4e7.tar.gz linux-stable-8c9faa556a37e62799fd22d7409386b1b8ddd4e7.tar.bz2 linux-stable-8c9faa556a37e62799fd22d7409386b1b8ddd4e7.zip |
tty: serial: meson: allow baud-rates higher than 115200
The vendor driver allows setting baud-rates higher than 115200 baud.
There is a check in the vendor driver which prevents using more than
115200 baud during startup, however it does not have such a check in
.set_termios.
Higher baud-rates are often used by the bluetooth modules embedded into
the SDIO wifi chips (Amlogic devices use brcmfmac based wifi chips quite
often, 2000000 baud seems to be a common value for the UART baud-rate in
Amlogic's "libbt").
I have tested this on a Meson GXL device with uart_A (to which the
bluetooth module is connected, where initialization times out with
115200 baud) and uart_AO (which I manually set to 2000000 baud and then
connected with my USB UART adapter to that).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/meson_uart.c')
-rw-r--r-- | drivers/tty/serial/meson_uart.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 6aea0f4a9165..60f16795d16b 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -364,7 +364,7 @@ static void meson_uart_set_termios(struct uart_port *port, writel(val, port->membase + AML_UART_CONTROL); - baud = uart_get_baud_rate(port, termios, old, 9600, 115200); + baud = uart_get_baud_rate(port, termios, old, 9600, 4000000); meson_uart_change_speed(port, baud); port->read_status_mask = AML_UART_TX_FIFO_WERR; |