tty: serial: msm: Add RX DMA support

Add receive DMA support for UARTDM type of controllers.

Tested on APQ8064, which have UARTDM v1.3 and ADM DMA engine
and APQ8016, which have UARTDM v1.4 and BAM DMA engine.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 229 insertions, 3 deletions

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 7006d979d9d2..3efb80f511db 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -33,6 +33,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
@@ -44,6 +45,7 @@
 #define UARTDM_BURST_SIZE	16   /* in bytes */
 #define UARTDM_TX_AIGN(x)	((x) & ~0x3) /* valid for > 1p3 */
 #define UARTDM_TX_MAX		256   /* in bytes, valid for <= 1p3 */
+#define UARTDM_RX_SIZE		(UART_XMIT_SIZE / 4)
 
 enum {
 	UARTDM_1P1 = 1,
@@ -73,9 +75,11 @@ struct msm_port {
 	unsigned int		old_snap_state;
 	bool			break_detected;
 	struct msm_dma		tx_dma;
+	struct msm_dma		rx_dma;
 };
 
 static void msm_handle_tx(struct uart_port *port);
+static void msm_start_rx_dma(struct msm_port *msm_port);
 
 void msm_stop_dma(struct uart_port *port, struct msm_dma *dma)
 {
@@ -114,6 +118,15 @@ static void msm_release_dma(struct msm_port *msm_port)
 	}
 
 	memset(dma, 0, sizeof(*dma));
+
+	dma = &msm_port->rx_dma;
+	if (dma->chan) {
+		msm_stop_dma(&msm_port->uart, dma);
+		dma_release_channel(dma->chan);
+		kfree(dma->virt);
+	}
+
+	memset(dma, 0, sizeof(*dma));
 }
 
 static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
@@ -159,6 +172,54 @@ no_tx:
 	memset(dma, 0, sizeof(*dma));
 }
 
+static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
+{
+	struct device *dev = msm_port->uart.dev;
+	struct dma_slave_config conf;
+	struct msm_dma *dma;
+	u32 crci = 0;
+	int ret;
+
+	dma = &msm_port->rx_dma;
+
+	/* allocate DMA resources, if available */
+	dma->chan = dma_request_slave_channel_reason(dev, "rx");
+	if (IS_ERR(dma->chan))
+		goto no_rx;
+
+	of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci);
+
+	dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL);
+	if (!dma->virt)
+		goto rel_rx;
+
+	memset(&conf, 0, sizeof(conf));
+	conf.direction = DMA_DEV_TO_MEM;
+	conf.device_fc = true;
+	conf.src_addr = base + UARTDM_RF;
+	conf.src_maxburst = UARTDM_BURST_SIZE;
+	conf.slave_id = crci;
+
+	ret = dmaengine_slave_config(dma->chan, &conf);
+	if (ret)
+		goto err;
+
+	dma->dir = DMA_FROM_DEVICE;
+
+	if (msm_port->is_uartdm < UARTDM_1P4)
+		dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE;
+	else
+		dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE;
+
+	return;
+err:
+	kfree(dma->virt);
+rel_rx:
+	dma_release_channel(dma->chan);
+no_rx:
+	memset(dma, 0, sizeof(*dma));
+}
+
 static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
 	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
@@ -306,12 +367,151 @@ unmap:
 	dma_unmap_single(port->dev, dma->phys, count, dma->dir);
 	return ret;
 }
+
+static void msm_complete_rx_dma(void *args)
+{
+	struct msm_port *msm_port = args;
+	struct uart_port *port = &msm_port->uart;
+	struct tty_port *tport = &port->state->port;
+	struct msm_dma *dma = &msm_port->rx_dma;
+	int count = 0, i, sysrq;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Already stopped */
+	if (!dma->count)
+		goto done;
+
+	val = msm_read(port, UARTDM_DMEN);
+	val &= ~dma->enable_bit;
+	msm_write(port, val, UARTDM_DMEN);
+
+	/* Restore interrupts */
+	msm_port->imr |= UART_IMR_RXLEV | UART_IMR_RXSTALE;
+	msm_write(port, msm_port->imr, UART_IMR);
+
+	if (msm_read(port, UART_SR) & UART_SR_OVERRUN) {
+		port->icount.overrun++;
+		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	}
+
+	count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
+
+	port->icount.rx += count;
+
+	dma->count = 0;
+
+	dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
+
+	for (i = 0; i < count; i++) {
+		char flag = TTY_NORMAL;
+
+		if (msm_port->break_detected && dma->virt[i] == 0) {
+			port->icount.brk++;
+			flag = TTY_BREAK;
+			msm_port->break_detected = false;
+			if (uart_handle_break(port))
+				continue;
+		}
+
+		if (!(port->read_status_mask & UART_SR_RX_BREAK))
+			flag = TTY_NORMAL;
+
+		spin_unlock_irqrestore(&port->lock, flags);
+		sysrq = uart_handle_sysrq_char(port, dma->virt[i]);
+		spin_lock_irqsave(&port->lock, flags);
+		if (!sysrq)
+			tty_insert_flip_char(tport, dma->virt[i], flag);
+	}
+
+	msm_start_rx_dma(msm_port);
+done:
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (count)
+		tty_flip_buffer_push(tport);
+}
+
+static void msm_start_rx_dma(struct msm_port *msm_port)
+{
+	struct msm_dma *dma = &msm_port->rx_dma;
+	struct uart_port *uart = &msm_port->uart;
+	u32 val;
+	int ret;
+
+	if (!dma->chan)
+		return;
+
+	dma->phys = dma_map_single(uart->dev, dma->virt,
+				   UARTDM_RX_SIZE, dma->dir);
+	ret = dma_mapping_error(uart->dev, dma->phys);
+	if (ret)
+		return;
+
+	dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
+						UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
+						DMA_PREP_INTERRUPT);
+	if (!dma->desc)
+		goto unmap;
+
+	dma->desc->callback = msm_complete_rx_dma;
+	dma->desc->callback_param = msm_port;
+
+	dma->cookie = dmaengine_submit(dma->desc);
+	ret = dma_submit_error(dma->cookie);
+	if (ret)
+		goto unmap;
+	/*
+	 * Using DMA for FIFO off-load, no need for "Rx FIFO over
+	 * watermark" or "stale" interrupts, disable them
+	 */
+	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+
+	/*
+	 * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
+	 * we need RXSTALE to flush input DMA fifo to memory
+	 */
+	if (msm_port->is_uartdm < UARTDM_1P4)
+		msm_port->imr |= UART_IMR_RXSTALE;
+
+	msm_write(uart, msm_port->imr, UART_IMR);
+
+	dma->count = UARTDM_RX_SIZE;
+
+	dma_async_issue_pending(dma->chan);
+
+	msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+	msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+
+	val = msm_read(uart, UARTDM_DMEN);
+	val |= dma->enable_bit;
+
+	if (msm_port->is_uartdm < UARTDM_1P4)
+		msm_write(uart, val, UARTDM_DMEN);
+
+	msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX);
+
+	if (msm_port->is_uartdm > UARTDM_1P3)
+		msm_write(uart, val, UARTDM_DMEN);
+
+	return;
+unmap:
+	dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
+}
+
 static void msm_stop_rx(struct uart_port *port)
 {
 	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_dma *dma = &msm_port->rx_dma;
 
 	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
 	msm_write(port, msm_port->imr, UART_IMR);
+
+	if (dma->chan)
+		msm_stop_dma(port, dma);
 }
 
 static void msm_enable_ms(struct uart_port *port)
@@ -392,6 +592,9 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
 		msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
 	msm_write(port, 0xFFFFFF, UARTDM_DMRX);
 	msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+
+	/* Try to use DMA */
+	msm_start_rx_dma(msm_port);
 }
 
 static void msm_handle_rx(struct uart_port *port)
@@ -558,8 +761,10 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
 	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_dma *dma = &msm_port->rx_dma;
 	unsigned long flags;
 	unsigned int misr;
+	u32 val;
 
 	spin_lock_irqsave(&port->lock, flags);
 	misr = msm_read(port, UART_MISR);
@@ -571,10 +776,21 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id)
 	}
 
 	if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
-		if (msm_port->is_uartdm)
+		if (dma->count) {
+			val = UART_CR_CMD_STALE_EVENT_DISABLE;
+			msm_write(port, val, UART_CR);
+			val = UART_CR_CMD_RESET_STALE_INT;
+			msm_write(port, val, UART_CR);
+			/*
+			 * Flush DMA input fifo to memory, this will also
+			 * trigger DMA RX completion
+			 */
+			dmaengine_terminate_all(dma->chan);
+		} else if (msm_port->is_uartdm) {
 			msm_handle_rx_dm(port, misr);
-		else
+		} else {
 			msm_handle_rx(port);
+		}
 	}
 	if (misr & UART_IMR_TXLEV)
 		msm_handle_tx(port);
@@ -773,8 +989,10 @@ static int msm_startup(struct uart_port *port)
 	data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
 	msm_write(port, data, UART_MR1);
 
-	if (msm_port->is_uartdm)
+	if (msm_port->is_uartdm) {
 		msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
+		msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
+	}
 
 	return 0;
 }
@@ -797,11 +1015,16 @@ static void msm_shutdown(struct uart_port *port)
 static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_dma *dma = &msm_port->rx_dma;
 	unsigned long flags;
 	unsigned int baud, mr;
 
 	spin_lock_irqsave(&port->lock, flags);
 
+	if (dma->chan) /* Terminate if any */
+		msm_stop_dma(port, dma);
+
 	/* calculate and set baud rate */
 	baud = uart_get_baud_rate(port, termios, old, 300, 115200);
 	baud = msm_set_baud_rate(port, baud);
@@ -866,6 +1089,9 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
+	/* Try to use DMA */
+	msm_start_rx_dma(msm_port);
+
 	spin_unlock_irqrestore(&port->lock, flags);
 }