serial: 8250_pci: Split out Pericom driver

Pericom along with Acces I/O support consumes a lot of LOCs in 8250_pci.c.
For the sake of easier maintenance, split it to a separate driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122133512.8947-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 228 insertions, 400 deletions

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 81aac3c25ead..e8b5469e9dfa 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1318,89 +1318,6 @@ static int pci_default_setup(struct serial_private *priv,
 
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
-static void
-pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
-			       unsigned int quot, unsigned int quot_frac)
-{
-	int scr;
-	int lcr;
-
-	for (scr = 16; scr > 4; scr--) {
-		unsigned int maxrate = port->uartclk / scr;
-		unsigned int divisor = max(maxrate / baud, 1U);
-		int delta = maxrate / divisor - baud;
-
-		if (baud > maxrate + baud / 50)
-			continue;
-
-		if (delta > baud / 50)
-			divisor++;
-
-		if (divisor > 0xffff)
-			continue;
-
-		/* Update delta due to possible divisor change */
-		delta = maxrate / divisor - baud;
-		if (abs(delta) < baud / 50) {
-			lcr = serial_port_in(port, UART_LCR);
-			serial_port_out(port, UART_LCR, lcr | 0x80);
-			serial_port_out(port, UART_DLL, divisor & 0xff);
-			serial_port_out(port, UART_DLM, divisor >> 8 & 0xff);
-			serial_port_out(port, 2, 16 - scr);
-			serial_port_out(port, UART_LCR, lcr);
-			return;
-		}
-	}
-}
-static int pci_pericom_setup(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	unsigned int bar, offset = board->first_offset, maxnr;
-
-	bar = FL_GET_BASE(board->flags);
-	if (board->flags & FL_BASE_BARS)
-		bar += idx;
-	else
-		offset += idx * board->uart_offset;
-
-
-	maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
-		(board->reg_shift + 3);
-
-	if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
-		return 1;
-
-	port->port.set_divisor = pericom_do_set_divisor;
-
-	return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-static int pci_pericom_setup_four_at_eight(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	unsigned int bar, offset = board->first_offset, maxnr;
-
-	bar = FL_GET_BASE(board->flags);
-	if (board->flags & FL_BASE_BARS)
-		bar += idx;
-	else
-		offset += idx * board->uart_offset;
-
-	if (idx==3)
-		offset = 0x38;
-
-	maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
-		(board->reg_shift + 3);
-
-	if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
-		return 1;
-
-	port->port.set_divisor = pericom_do_set_divisor;
-
-	return setup_port(priv, port, bar, offset, board->reg_shift);
-}
 
 static int
 ce4100_serial_setup(struct serial_private *priv,
@@ -1886,42 +1803,6 @@ pci_moxa_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_WCH_CH384_8S	0x3853
 #define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
 
-#define PCI_VENDOR_ID_ACCESIO			0x494f
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB	0x1051
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S	0x1053
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB	0x105C
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S	0x105E
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB	0x1091
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2	0x1093
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB	0x1099
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4	0x109B
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB	0x10D1
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM	0x10D3
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB	0x10DA
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM	0x10DC
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1	0x1108
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2	0x1110
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2	0x1111
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4	0x1118
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4	0x1119
-#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S	0x1152
-#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S	0x115A
-#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2	0x1190
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2	0x1191
-#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4	0x1198
-#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4	0x1199
-#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM	0x11D0
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4	0x105A
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4	0x105B
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8	0x106A
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8	0x106B
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4	0x1098
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8	0x10A9
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM	0x10D9
-#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM	0x10E9
-#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM	0x11D8
-
-
 #define	PCI_DEVICE_ID_MOXA_CP102E	0x1024
 #define	PCI_DEVICE_ID_MOXA_CP102EL	0x1025
 #define	PCI_DEVICE_ID_MOXA_CP104EL_A	0x1045
@@ -2199,16 +2080,6 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.exit		= pci_plx9050_exit,
 	},
 	/*
-	 * Pericom (Only 7954 - It have a offset jump for port 4)
-	 */
-	{
-		.vendor		= PCI_VENDOR_ID_PERICOM,
-		.device		= PCI_DEVICE_ID_PERICOM_PI7C9X7954,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup_four_at_eight,
-	},
-	/*
 	 * PLX
 	 */
 	{
@@ -2238,125 +2109,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.setup		= pci_default_setup,
 		.exit		= pci_plx9050_exit,
 	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup_four_at_eight,
-	},
-	{
-		.vendor     = PCI_VENDOR_ID_ACCESIO,
-		.device     = PCI_ANY_ID,
-		.subvendor  = PCI_ANY_ID,
-		.subdevice  = PCI_ANY_ID,
-		.setup      = pci_pericom_setup,
-	},	/*
+	/*
 	 * SBS Technologies, Inc., PMC-OCTALPRO 232
 	 */
 	{
@@ -2948,10 +2701,6 @@ enum pci_board_num_t {
 	pbn_wch382_2,
 	pbn_wch384_4,
 	pbn_wch384_8,
-	pbn_pericom_PI7C9X7951,
-	pbn_pericom_PI7C9X7952,
-	pbn_pericom_PI7C9X7954,
-	pbn_pericom_PI7C9X7958,
 	pbn_sunix_pci_1s,
 	pbn_sunix_pci_2s,
 	pbn_sunix_pci_4s,
@@ -3696,33 +3445,6 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset    = 8,
 		.first_offset   = 0x00,
 	},
-	/*
-	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
-	 */
-	[pbn_pericom_PI7C9X7951] = {
-		.flags          = FL_BASE0,
-		.num_ports      = 1,
-		.base_baud      = 921600,
-		.uart_offset	= 0x8,
-	},
-	[pbn_pericom_PI7C9X7952] = {
-		.flags          = FL_BASE0,
-		.num_ports      = 2,
-		.base_baud      = 921600,
-		.uart_offset	= 0x8,
-	},
-	[pbn_pericom_PI7C9X7954] = {
-		.flags          = FL_BASE0,
-		.num_ports      = 4,
-		.base_baud      = 921600,
-		.uart_offset	= 0x8,
-	},
-	[pbn_pericom_PI7C9X7958] = {
-		.flags          = FL_BASE0,
-		.num_ports      = 8,
-		.base_baud      = 921600,
-		.uart_offset	= 0x8,
-	},
 	[pbn_sunix_pci_1s] = {
 		.num_ports	= 1,
 		.base_baud      = 921600,
@@ -3834,6 +3556,10 @@ static const struct pci_device_id blacklist[] = {
 	{ PCI_VDEVICE(EXAR, PCI_ANY_ID), },
 	{ PCI_VDEVICE(COMMTECH, PCI_ANY_ID), },
 
+	/* Pericom devices */
+	{ PCI_VDEVICE(PERICOM, PCI_ANY_ID), },
+	{ PCI_VDEVICE(ACCESSIO, PCI_ANY_ID), },
+
 	/* End of the black list */
 	{ }
 };
@@ -5028,127 +4754,6 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b3_8_115200 },
 	/*
-	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
-	 */
-	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_pericom_PI7C9X7951 },
-	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_pericom_PI7C9X7952 },
-	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_pericom_PI7C9X7954 },
-	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_pericom_PI7C9X7958 },
-	/*
-	 * ACCES I/O Products quad
-	 */
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7951 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7952 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
-	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
-	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
 	 */
 	{	PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c
new file mode 100644
index 000000000000..df27f0daea7a
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pericom.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for Pericom UART */
+
+#include <linux/bits.h>
+#include <linux/module.h>
+#include <linux/overflow.h>
+#include <linux/pci.h>
+
+#include "8250.h"
+
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SDB	0x1051
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2S	0x1053
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_4	0x105a
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_4	0x105b
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SDB	0x105c
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4S	0x105e
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_8	0x106a
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_8	0x106b
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_2DB	0x1091
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_2	0x1093
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4	0x1098
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4DB	0x1099
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_4	0x109b
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_8	0x10a9
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SMDB	0x10d1
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2SM	0x10d3
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SM	0x10d9
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SMDB	0x10da
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4SM	0x10dc
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_COM_8SM	0x10e9
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_1	0x1108
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_2	0x1110
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_2	0x1111
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_4	0x1118
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_4	0x1119
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2S	0x1152
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4S	0x115a
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_2	0x1190
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_2	0x1191
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_4	0x1198
+#define PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_4	0x1199
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2SM	0x11d0
+#define PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4SM	0x11d8
+
+struct pericom8250 {
+	void __iomem *virt;
+	unsigned int nr;
+	int line[];
+};
+
+static void pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
+				   unsigned int quot, unsigned int quot_frac)
+{
+	int scr;
+
+	for (scr = 16; scr > 4; scr--) {
+		unsigned int maxrate = port->uartclk / scr;
+		unsigned int divisor = max(maxrate / baud, 1U);
+		int delta = maxrate / divisor - baud;
+
+		if (baud > maxrate + baud / 50)
+			continue;
+
+		if (delta > baud / 50)
+			divisor++;
+
+		if (divisor > 0xffff)
+			continue;
+
+		/* Update delta due to possible divisor change */
+		delta = maxrate / divisor - baud;
+		if (abs(delta) < baud / 50) {
+			int lcr = serial_port_in(port, UART_LCR);
+
+			serial_port_out(port, UART_LCR, lcr | 0x80);
+			serial_port_out(port, UART_DLL, divisor & 0xff);
+			serial_port_out(port, UART_DLM, (divisor >> 8) & 0xff);
+			serial_port_out(port, 2, 16 - scr);
+			serial_port_out(port, UART_LCR, lcr);
+			return;
+		}
+	}
+}
+
+static int pericom8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	unsigned int nr, i, bar = 0, maxnr;
+	struct pericom8250 *pericom;
+	struct uart_8250_port uart;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	maxnr = pci_resource_len(pdev, bar) >> 3;
+
+	if (pdev->vendor == PCI_VENDOR_ID_PERICOM)
+		nr = pdev->device & 0x0f;
+	else if (pdev->vendor == PCI_VENDOR_ID_ACCESSIO)
+		nr = BIT(((pdev->device & 0x38) >> 3) - 1);
+	else
+		nr = 1;
+
+	pericom = devm_kzalloc(&pdev->dev, struct_size(pericom, line, nr), GFP_KERNEL);
+	if (!pericom)
+		return -ENOMEM;
+
+	pericom->virt = pcim_iomap(pdev, bar, 0);
+	if (!pericom->virt)
+		return -ENOMEM;
+
+	memset(&uart, 0, sizeof(uart));
+
+	uart.port.dev = &pdev->dev;
+	uart.port.irq = pdev->irq;
+	uart.port.private_data = pericom;
+	uart.port.iotype = UPIO_PORT;
+	uart.port.uartclk = 921600 * 16;
+	uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+	uart.port.set_divisor = pericom_do_set_divisor;
+	for (i = 0; i < nr && i < maxnr; i++) {
+		unsigned int offset = (i == 3 && nr == 4) ? 0x38 : i * 0x8;
+
+		uart.port.iobase = pci_resource_start(pdev, bar) + offset;
+
+		dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+			uart.port.iobase, uart.port.irq, uart.port.iotype);
+
+		pericom->line[i] = serial8250_register_8250_port(&uart);
+		if (pericom->line[i] < 0) {
+			dev_err(&pdev->dev,
+				"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+				uart.port.iobase, uart.port.irq,
+				uart.port.iotype, pericom->line[i]);
+			break;
+		}
+	}
+	pericom->nr = i;
+
+	pci_set_drvdata(pdev, pericom);
+	return 0;
+}
+
+static void pericom8250_remove(struct pci_dev *pdev)
+{
+	struct pericom8250 *pericom = pci_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < pericom->nr; i++)
+		serial8250_unregister_port(pericom->line[i]);
+}
+
+static const struct pci_device_id pericom8250_pci_ids[] = {
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 * (Only 7954 has an offset jump for port 4)
+	 */
+	{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951) },
+	{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952) },
+	{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954) },
+	{ PCI_VDEVICE(PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958) },
+
+	/*
+	 * ACCES I/O Products quad
+	 * (Only 7954 has an offset jump for port 4)
+	 */
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SDB) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2S) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SDB) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4S) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM422_8) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM485_8) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_2DB) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_2) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_4DB) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM232_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM232_8) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_2SMDB) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_2SM) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SM) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_4SMDB) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_COM_4SM) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_COM_8SM) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_1) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_2) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_2) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM422_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM485_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2S) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4S) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_2) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_2) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM232_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_MPCIE_ICM232_4) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_2SM) },
+	{ PCI_VDEVICE(ACCESSIO, PCI_DEVICE_ID_ACCESSIO_PCIE_ICM_4SM) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, pericom8250_pci_ids);
+
+static struct pci_driver pericom8250_pci_driver = {
+	.name           = "8250_pericom",
+	.id_table       = pericom8250_pci_ids,
+	.probe          = pericom8250_probe,
+	.remove         = pericom8250_remove,
+};
+module_pci_driver(pericom8250_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Pericom UART driver");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 8cd11aa63ed5..9d415a38cc71 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -498,6 +498,14 @@ config SERIAL_8250_MID
 	  present on the UART found on Intel Medfield SOC and various other
 	  Intel platforms.
 
+config SERIAL_8250_PERICOM
+	tristate "Support for Pericom and Acces I/O serial ports"
+	default SERIAL_8250
+	depends on SERIAL_8250 && PCI
+	help
+	  Selecting this option will enable handling of the extra features
+	  present on the Pericom and Acces I/O UARTs.
+
 config SERIAL_8250_PXA
 	tristate "PXA serial port support"
 	depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index b9bcd73c8997..4e4913e0e4d2 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_LPSS)		+= 8250_lpss.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
+obj-$(CONFIG_SERIAL_8250_PERICOM)	+= 8250_pericom.o
 obj-$(CONFIG_SERIAL_8250_PXA)		+= 8250_pxa.o
 obj-$(CONFIG_SERIAL_8250_TEGRA)		+= 8250_tegra.o
 obj-$(CONFIG_SERIAL_8250_BCM7271)	+= 8250_bcm7271.o