USB: Remove remnants of Wireless USB and UWB

Wireless USB has long been defunct, and kernel support for it was
removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and
UWB from the kernel tree.").

Nevertheless, some vestiges of the old implementation still clutter up
the USB subsystem and one or two other places.  Let's get rid of them
once and for all.

The only parts still left are the user-facing APIs in
include/uapi/linux/usb/ch9.h.  (There are also a couple of misleading
instances, such as the Sierra Wireless USB modem, which is a USB modem
made by Sierra Wireless.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 55 insertions, 185 deletions

diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 725b8dbcfe5f..b19e38d5fd10 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -1051,9 +1051,6 @@ int usb_get_bos_descriptor(struct usb_device *dev)
 		}
 
 		switch (cap_type) {
-		case USB_CAP_TYPE_WIRELESS_USB:
-			/* Wireless USB cap descriptor is handled by wusb */
-			break;
 		case USB_CAP_TYPE_EXT:
 			dev->bos->ext_cap =
 				(struct usb_ext_cap_descriptor *)buffer;
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 2c14a9636056..a247da73f34d 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -424,7 +424,6 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 	case USB_SPEED_UNKNOWN:		/* usb 1.1 root hub code */
 	case USB_SPEED_FULL:
 		speed = "12"; break;
-	case USB_SPEED_WIRELESS:	/* Wireless has no real fixed speed */
 	case USB_SPEED_HIGH:
 		speed = "480"; break;
 	case USB_SPEED_SUPER:
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6af0a31ff147..12b6dfeaf658 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -156,27 +156,6 @@ static const u8 usb3_rh_dev_descriptor[18] = {
 	0x01        /*  __u8  bNumConfigurations; */
 };
 
-/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
-static const u8 usb25_rh_dev_descriptor[18] = {
-	0x12,       /*  __u8  bLength; */
-	USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
-	0x50, 0x02, /*  __le16 bcdUSB; v2.5 */
-
-	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	    /*  __u8  bDeviceSubClass; */
-	0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
-	0xFF,       /*  __u8  bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
-
-	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
-	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
-	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
-
-	0x03,       /*  __u8  iManufacturer; */
-	0x02,       /*  __u8  iProduct; */
-	0x01,       /*  __u8  iSerialNumber; */
-	0x01        /*  __u8  bNumConfigurations; */
-};
-
 /* usb 2.0 root hub device descriptor */
 static const u8 usb2_rh_dev_descriptor[18] = {
 	0x12,       /*  __u8  bLength; */
@@ -368,7 +347,7 @@ static const u8 ss_rh_config_descriptor[] = {
 };
 
 /* authorized_default behaviour:
- * -1 is authorized for all devices except wireless (old behaviour)
+ * -1 is authorized for all devices (leftover from wireless USB)
  * 0 is unauthorized for all devices
  * 1 is authorized for all devices
  * 2 is authorized for internal devices
@@ -383,7 +362,7 @@ module_param(authorized_default, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(authorized_default,
 		"Default USB device authorization: 0 is not authorized, 1 is "
 		"authorized, 2 is authorized for internal devices, -1 is "
-		"authorized except for wireless USB (default, old behaviour)");
+		"authorized (default, same as 1)");
 /*-------------------------------------------------------------------------*/
 
 /**
@@ -578,9 +557,6 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 			case HCD_USB3:
 				bufp = usb3_rh_dev_descriptor;
 				break;
-			case HCD_USB25:
-				bufp = usb25_rh_dev_descriptor;
-				break;
 			case HCD_USB2:
 				bufp = usb2_rh_dev_descriptor;
 				break;
@@ -602,7 +578,6 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 				bufp = ss_rh_config_descriptor;
 				len = sizeof ss_rh_config_descriptor;
 				break;
-			case HCD_USB25:
 			case HCD_USB2:
 				bufp = hs_rh_config_descriptor;
 				len = sizeof hs_rh_config_descriptor;
@@ -2848,18 +2823,14 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
 		break;
 
-	case USB_AUTHORIZE_ALL:
-		hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
-		break;
-
 	case USB_AUTHORIZE_INTERNAL:
 		hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
 		break;
 
+	case USB_AUTHORIZE_ALL:
 	case USB_AUTHORIZE_WIRED:
 	default:
-		hcd->dev_policy = hcd->wireless ?
-			USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
+		hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
 		break;
 	}
 
@@ -2903,9 +2874,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	case HCD_USB2:
 		rhdev->speed = USB_SPEED_HIGH;
 		break;
-	case HCD_USB25:
-		rhdev->speed = USB_SPEED_WIRELESS;
-		break;
 	case HCD_USB3:
 		rhdev->speed = USB_SPEED_SUPER;
 		break;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 878913f4b4b3..b3c09e4c8492 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2140,22 +2140,6 @@ EXPORT_SYMBOL_GPL(usb_set_device_state);
  * USB-3.0 buses the address is assigned by the controller hardware
  * and it usually is not the same as the device number.
  *
- * WUSB devices are simple: they have no hubs behind, so the mapping
- * device <-> virtual port number becomes 1:1. Why? to simplify the
- * life of the device connection logic in
- * drivers/usb/wusbcore/devconnect.c. When we do the initial secret
- * handshake we need to assign a temporary address in the unauthorized
- * space. For simplicity we use the first virtual port number found to
- * be free [drivers/usb/wusbcore/devconnect.c:wusbhc_devconnect_ack()]
- * and that becomes it's address [X < 128] or its unauthorized address
- * [X | 0x80].
- *
- * We add 1 as an offset to the one-based USB-stack port number
- * (zero-based wusb virtual port index) for two reasons: (a) dev addr
- * 0 is reserved by USB for default address; (b) Linux's USB stack
- * uses always #1 for the root hub of the controller. So USB stack's
- * port #1, which is wusb virtual-port #0 has address #2.
- *
  * Devices connected under xHCI are not as simple.  The host controller
  * supports virtualization, so the hardware assigns device addresses and
  * the HCD must setup data structures before issuing a set address
@@ -2168,19 +2152,13 @@ static void choose_devnum(struct usb_device *udev)
 
 	/* be safe when more hub events are proceed in parallel */
 	mutex_lock(&bus->devnum_next_mutex);
-	if (udev->wusb) {
-		devnum = udev->portnum + 1;
-		BUG_ON(test_bit(devnum, bus->devmap.devicemap));
-	} else {
-		/* Try to allocate the next devnum beginning at
-		 * bus->devnum_next. */
-		devnum = find_next_zero_bit(bus->devmap.devicemap, 128,
-					    bus->devnum_next);
-		if (devnum >= 128)
-			devnum = find_next_zero_bit(bus->devmap.devicemap,
-						    128, 1);
-		bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
-	}
+
+	/* Try to allocate the next devnum beginning at bus->devnum_next. */
+	devnum = find_next_zero_bit(bus->devmap.devicemap, 128,
+			bus->devnum_next);
+	if (devnum >= 128)
+		devnum = find_next_zero_bit(bus->devmap.devicemap, 128, 1);
+	bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
 	if (devnum < 128) {
 		set_bit(devnum, bus->devmap.devicemap);
 		udev->devnum = devnum;
@@ -2198,9 +2176,7 @@ static void release_devnum(struct usb_device *udev)
 
 static void update_devnum(struct usb_device *udev, int devnum)
 {
-	/* The address for a WUSB device is managed by wusbcore. */
-	if (!udev->wusb)
-		udev->devnum = devnum;
+	udev->devnum = devnum;
 	if (!udev->devaddr)
 		udev->devaddr = (u8)devnum;
 }
@@ -2693,20 +2669,6 @@ int usb_authorize_device(struct usb_device *usb_dev)
 		goto error_autoresume;
 	}
 
-	if (usb_dev->wusb) {
-		struct usb_device_descriptor *descr;
-
-		descr = usb_get_device_descriptor(usb_dev);
-		if (IS_ERR(descr)) {
-			result = PTR_ERR(descr);
-			dev_err(&usb_dev->dev, "can't re-read device descriptor for "
-				"authorization: %d\n", result);
-			goto error_device_descriptor;
-		}
-		usb_dev->descriptor = *descr;
-		kfree(descr);
-	}
-
 	usb_dev->authorized = 1;
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
@@ -2723,7 +2685,6 @@ int usb_authorize_device(struct usb_device *usb_dev)
 	}
 	dev_info(&usb_dev->dev, "authorized to connect\n");
 
-error_device_descriptor:
 	usb_autosuspend_device(usb_dev);
 error_autoresume:
 out_authorized:
@@ -2806,17 +2767,6 @@ out:
 	return USB_SSP_GEN_UNKNOWN;
 }
 
-/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
-static unsigned hub_is_wusb(struct usb_hub *hub)
-{
-	struct usb_hcd *hcd;
-	if (hub->hdev->parent != NULL)  /* not a root hub? */
-		return 0;
-	hcd = bus_to_hcd(hub->hdev->bus);
-	return hcd->wireless;
-}
-
-
 #ifdef CONFIG_USB_FEW_INIT_RETRIES
 #define PORT_RESET_TRIES	2
 #define SET_ADDRESS_TRIES	1
@@ -2969,9 +2919,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		udev->tx_lanes = 1;
 		udev->ssp_rate = USB_SSP_GEN_UNKNOWN;
 	}
-	if (hub_is_wusb(hub))
-		udev->speed = USB_SPEED_WIRELESS;
-	else if (udev->ssp_rate != USB_SSP_GEN_UNKNOWN)
+	if (udev->ssp_rate != USB_SSP_GEN_UNKNOWN)
 		udev->speed = USB_SPEED_SUPER_PLUS;
 	else if (hub_is_superspeed(hub->hdev))
 		udev->speed = USB_SPEED_SUPER;
@@ -4880,13 +4828,10 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (initial) {
 		/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
 		 * it's fixed size except for full speed devices.
-		 * For Wireless USB devices, ep0 max packet is always 512 (tho
-		 * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
 		 */
 		switch (udev->speed) {
 		case USB_SPEED_SUPER_PLUS:
 		case USB_SPEED_SUPER:
-		case USB_SPEED_WIRELESS:	/* fixed at 512 */
 			udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
 			break;
 		case USB_SPEED_HIGH:		/* fixed at 64 */
@@ -4907,10 +4852,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		}
 	}
 
-	if (udev->speed == USB_SPEED_WIRELESS)
-		speed = "variable speed Wireless";
-	else
-		speed = usb_speed_string(udev->speed);
+	speed = usb_speed_string(udev->speed);
 
 	/*
 	 * The controller driver may be NULL if the controller device
@@ -5003,50 +4945,44 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 			}
 		}
 
+		for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) {
+			retval = hub_set_address(udev, devnum);
+			if (retval >= 0)
+				break;
+			msleep(200);
+		}
+		if (retval < 0) {
+			if (retval != -ENODEV)
+				dev_err(&udev->dev, "device not accepting address %d, error %d\n",
+						devnum, retval);
+			goto fail;
+		}
+		if (udev->speed >= USB_SPEED_SUPER) {
+			devnum = udev->devnum;
+			dev_info(&udev->dev,
+					"%s SuperSpeed%s%s USB device number %d using %s\n",
+					(udev->config) ? "reset" : "new",
+				 (udev->speed == USB_SPEED_SUPER_PLUS) ?
+						" Plus" : "",
+				 (udev->ssp_rate == USB_SSP_GEN_2x2) ?
+						" Gen 2x2" :
+				 (udev->ssp_rate == USB_SSP_GEN_2x1) ?
+						" Gen 2x1" :
+				 (udev->ssp_rate == USB_SSP_GEN_1x2) ?
+						" Gen 1x2" : "",
+				 devnum, driver_name);
+		}
+
 		/*
-		 * If device is WUSB, we already assigned an
-		 * unauthorized address in the Connect Ack sequence;
-		 * authorization will assign the final address.
+		 * cope with hardware quirkiness:
+		 *  - let SET_ADDRESS settle, some device hardware wants it
+		 *  - read ep0 maxpacket even for high and low speed,
 		 */
-		if (udev->wusb == 0) {
-			for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) {
-				retval = hub_set_address(udev, devnum);
-				if (retval >= 0)
-					break;
-				msleep(200);
-			}
-			if (retval < 0) {
-				if (retval != -ENODEV)
-					dev_err(&udev->dev, "device not accepting address %d, error %d\n",
-							devnum, retval);
-				goto fail;
-			}
-			if (udev->speed >= USB_SPEED_SUPER) {
-				devnum = udev->devnum;
-				dev_info(&udev->dev,
-						"%s SuperSpeed%s%s USB device number %d using %s\n",
-						(udev->config) ? "reset" : "new",
-					 (udev->speed == USB_SPEED_SUPER_PLUS) ?
-							" Plus" : "",
-					 (udev->ssp_rate == USB_SSP_GEN_2x2) ?
-							" Gen 2x2" :
-					 (udev->ssp_rate == USB_SSP_GEN_2x1) ?
-							" Gen 2x1" :
-					 (udev->ssp_rate == USB_SSP_GEN_1x2) ?
-							" Gen 1x2" : "",
-					 devnum, driver_name);
-			}
+		msleep(10);
 
-			/* cope with hardware quirkiness:
-			 *  - let SET_ADDRESS settle, some device hardware wants it
-			 *  - read ep0 maxpacket even for high and low speed,
-			 */
-			msleep(10);
-			if (do_new_scheme)
-				break;
-		}
+		if (do_new_scheme)
+			break;
 
-		/* !do_new_scheme || wusb */
 		maxp0 = get_bMaxPacketSize0(udev, buf, 8, retries == 0);
 		if (maxp0 < 0) {
 			retval = maxp0;
@@ -5128,7 +5064,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 
 	usb_detect_quirks(udev);
 
-	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
+	if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
 			udev->lpm_capable = usb_device_supports_lpm(udev);
@@ -5404,7 +5340,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		usb_set_device_state(udev, USB_STATE_POWERED);
 		udev->bus_mA = hub->mA_per_port;
 		udev->level = hdev->level + 1;
-		udev->wusb = hub_is_wusb(hub);
 
 		/* Devices connected to SuperSpeed hubs are USB 3.0 or later */
 		if (hub_is_superspeed(hub->hdev))
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 323dc02becbe..5d21718afb05 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -161,9 +161,6 @@ static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
 	case USB_SPEED_HIGH:
 		speed = "480";
 		break;
-	case USB_SPEED_WIRELESS:
-		speed = "480";
-		break;
 	case USB_SPEED_SUPER:
 		speed = "5000";
 		break;
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 9f3c54032556..7576920e2d5a 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -480,8 +480,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			urb->iso_frame_desc[n].status = -EXDEV;
 			urb->iso_frame_desc[n].actual_length = 0;
 		}
-	} else if (urb->num_sgs && !urb->dev->bus->no_sg_constraint &&
-			dev->speed != USB_SPEED_WIRELESS) {
+	} else if (urb->num_sgs && !urb->dev->bus->no_sg_constraint) {
 		struct scatterlist *sg;
 		int i;
 
@@ -540,17 +539,9 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	case USB_ENDPOINT_XFER_ISOC:
 	case USB_ENDPOINT_XFER_INT:
 		/* too small? */
-		switch (dev->speed) {
-		case USB_SPEED_WIRELESS:
-			if ((urb->interval < 6)
-				&& (xfertype == USB_ENDPOINT_XFER_INT))
-				return -EINVAL;
-			fallthrough;
-		default:
-			if (urb->interval <= 0)
-				return -EINVAL;
-			break;
-		}
+		if (urb->interval <= 0)
+			return -EINVAL;
+
 		/* too big? */
 		switch (dev->speed) {
 		case USB_SPEED_SUPER_PLUS:
@@ -560,10 +551,6 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 				return -EINVAL;
 			max = 1 << 15;
 			break;
-		case USB_SPEED_WIRELESS:
-			if (urb->interval > 16)
-				return -EINVAL;
-			break;
 		case USB_SPEED_HIGH:	/* units are microframes */
 			/* NOTE usb handles 2^15 */
 			if (urb->interval > (1024 * 8))
@@ -587,10 +574,8 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 		default:
 			return -EINVAL;
 		}
-		if (dev->speed != USB_SPEED_WIRELESS) {
-			/* Round down to a power of 2, no more than max */
-			urb->interval = min(max, 1 << ilog2(urb->interval));
-		}
+		/* Round down to a power of 2, no more than max */
+		urb->interval = min(max, 1 << ilog2(urb->interval));
 	}
 
 	return usb_hcd_submit_urb(urb, mem_flags);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index bba87e5b7f8a..0945ff8df500 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -602,14 +602,6 @@ struct device_type usb_device_type = {
 #endif
 };
 
-
-/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
-static unsigned usb_bus_is_wusb(struct usb_bus *bus)
-{
-	struct usb_hcd *hcd = bus_to_hcd(bus);
-	return hcd->wireless;
-}
-
 static bool usb_dev_authorized(struct usb_device *dev, struct usb_hcd *hcd)
 {
 	struct usb_hub *hub;
@@ -749,9 +741,6 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 #endif
 
 	dev->authorized = usb_dev_authorized(dev, usb_hcd);
-	if (!root_hub)
-		dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
-
 	return dev;
 }
 EXPORT_SYMBOL_GPL(usb_alloc_dev);