diff options
author | Ivan T. Ivanov <ivan.ivanov@linaro.org> | 2015-07-28 11:10:22 +0300 |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2015-07-30 11:43:36 -0500 |
commit | 6f98f545b0b4effdf67e83e214a4eb13cd41fba2 (patch) | |
tree | d8a8e07266d5dc757730df64c4fafcd2fd3c20aa /drivers/usb/phy | |
parent | 736d093b5985c1f6583460c8eea1be3c9ee5635e (diff) | |
download | linux-stable-6f98f545b0b4effdf67e83e214a4eb13cd41fba2.tar.gz linux-stable-6f98f545b0b4effdf67e83e214a4eb13cd41fba2.tar.bz2 linux-stable-6f98f545b0b4effdf67e83e214a4eb13cd41fba2.zip |
usb: phy: msm: Add D+/D- lines route control
apq8016-sbc board is using Dual SPDT USB Switch (TC7USB40MU),
witch is controlled by GPIO to de/multiplex D+/D- USB lines to
USB2513B Hub and uB connector. Add support for this.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 61d86d8bf5b7..c58c3c0dbe35 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/device.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/slab.h> @@ -32,6 +33,7 @@ #include <linux/pm_runtime.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/reboot.h> #include <linux/reset.h> #include <linux/usb.h> @@ -1471,6 +1473,14 @@ static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event, else clear_bit(B_SESS_VLD, &motg->inputs); + if (test_bit(B_SESS_VLD, &motg->inputs)) { + /* Switch D+/D- lines to Device connector */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + } else { + /* Switch D+/D- lines to Hub */ + gpiod_set_value_cansleep(motg->switch_gpio, 1); + } + schedule_work(&motg->sm_work); return NOTIFY_DONE; @@ -1546,6 +1556,11 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup"); + motg->switch_gpio = devm_gpiod_get_optional(&pdev->dev, "switch", + GPIOD_OUT_LOW); + if (IS_ERR(motg->switch_gpio)) + return PTR_ERR(motg->switch_gpio); + ext_id = ERR_PTR(-ENODEV); ext_vbus = ERR_PTR(-ENODEV); if (of_property_read_bool(node, "extcon")) { @@ -1617,6 +1632,19 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) return 0; } +static int msm_otg_reboot_notify(struct notifier_block *this, + unsigned long code, void *unused) +{ + struct msm_otg *motg = container_of(this, struct msm_otg, reboot); + + /* + * Ensure that D+/D- lines are routed to uB connector, so + * we could load bootloader/kernel at next reboot + */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + return NOTIFY_DONE; +} + static int msm_otg_probe(struct platform_device *pdev) { struct regulator_bulk_data regs[3]; @@ -1781,6 +1809,17 @@ static int msm_otg_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Can not create mode change file\n"); } + if (test_bit(B_SESS_VLD, &motg->inputs)) { + /* Switch D+/D- lines to Device connector */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + } else { + /* Switch D+/D- lines to Hub */ + gpiod_set_value_cansleep(motg->switch_gpio, 1); + } + + motg->reboot.notifier_call = msm_otg_reboot_notify; + register_reboot_notifier(&motg->reboot); + pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -1807,6 +1846,14 @@ static int msm_otg_remove(struct platform_device *pdev) if (phy->otg->host || phy->otg->gadget) return -EBUSY; + unregister_reboot_notifier(&motg->reboot); + + /* + * Ensure that D+/D- lines are routed to uB connector, so + * we could load bootloader/kernel at next reboot + */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + extcon_unregister_notifier(motg->id.extcon, EXTCON_USB_HOST, &motg->id.nb); extcon_unregister_notifier(motg->vbus.extcon, EXTCON_USB, &motg->vbus.nb); |