summaryrefslogtreecommitdiffstats
path: root/include/linux/ethtool.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/ethtool.h
downloadlinux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/ethtool.h')
-rw-r--r--include/linux/ethtool.h471
1 files changed, 471 insertions, 0 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
new file mode 100644
index 000000000000..c85b210490ea
--- /dev/null
+++ b/include/linux/ethtool.h
@@ -0,0 +1,471 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ * christopher.leech@intel.com,
+ * scott.feldman@intel.com)
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+ u32 cmd;
+ u32 supported; /* Features this interface supports */
+ u32 advertising; /* Features this interface advertises */
+ u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
+ u8 duplex; /* Duplex, half or full */
+ u8 port; /* Which connector port */
+ u8 phy_address;
+ u8 transceiver; /* Which transceiver to use */
+ u8 autoneg; /* Enable or disable autonegotiation */
+ u32 maxtxpkt; /* Tx pkts before generating tx int */
+ u32 maxrxpkt; /* Rx pkts before generating rx int */
+ u32 reserved[4];
+};
+
+#define ETHTOOL_BUSINFO_LEN 32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+ u32 cmd;
+ char driver[32]; /* driver short name, "tulip", "eepro100" */
+ char version[32]; /* driver version string */
+ char fw_version[32]; /* firmware version string, if applicable */
+ char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
+ /* For PCI devices, use pci_name(pci_dev). */
+ char reserved1[32];
+ char reserved2[16];
+ u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
+ u32 testinfo_len;
+ u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
+ u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX 6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+ u32 cmd;
+ u32 supported;
+ u32 wolopts;
+ u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+ u32 cmd;
+ u32 data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+ u32 cmd;
+ u32 version; /* driver-specific, indicates different chips/revs */
+ u32 len; /* bytes */
+ u8 data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+ u32 cmd;
+ u32 magic;
+ u32 offset; /* in bytes */
+ u32 len; /* in bytes */
+ u8 data[0];
+};
+
+/* for configuring coalescing parameters of chip */
+struct ethtool_coalesce {
+ u32 cmd; /* ETHTOOL_{G,S}COALESCE */
+
+ /* How many usecs to delay an RX interrupt after
+ * a packet arrives. If 0, only rx_max_coalesced_frames
+ * is used.
+ */
+ u32 rx_coalesce_usecs;
+
+ /* How many packets to delay an RX interrupt after
+ * a packet arrives. If 0, only rx_coalesce_usecs is
+ * used. It is illegal to set both usecs and max frames
+ * to zero as this would cause RX interrupts to never be
+ * generated.
+ */
+ u32 rx_max_coalesced_frames;
+
+ /* Same as above two parameters, except that these values
+ * apply while an IRQ is being serviced by the host. Not
+ * all cards support this feature and the values are ignored
+ * in that case.
+ */
+ u32 rx_coalesce_usecs_irq;
+ u32 rx_max_coalesced_frames_irq;
+
+ /* How many usecs to delay a TX interrupt after
+ * a packet is sent. If 0, only tx_max_coalesced_frames
+ * is used.
+ */
+ u32 tx_coalesce_usecs;
+
+ /* How many packets to delay a TX interrupt after
+ * a packet is sent. If 0, only tx_coalesce_usecs is
+ * used. It is illegal to set both usecs and max frames
+ * to zero as this would cause TX interrupts to never be
+ * generated.
+ */
+ u32 tx_max_coalesced_frames;
+
+ /* Same as above two parameters, except that these values
+ * apply while an IRQ is being serviced by the host. Not
+ * all cards support this feature and the values are ignored
+ * in that case.
+ */
+ u32 tx_coalesce_usecs_irq;
+ u32 tx_max_coalesced_frames_irq;
+
+ /* How many usecs to delay in-memory statistics
+ * block updates. Some drivers do not have an in-memory
+ * statistic block, and in such cases this value is ignored.
+ * This value must not be zero.
+ */
+ u32 stats_block_coalesce_usecs;
+
+ /* Adaptive RX/TX coalescing is an algorithm implemented by
+ * some drivers to improve latency under low packet rates and
+ * improve throughput under high packet rates. Some drivers
+ * only implement one of RX or TX adaptive coalescing. Anything
+ * not implemented by the driver causes these values to be
+ * silently ignored.
+ */
+ u32 use_adaptive_rx_coalesce;
+ u32 use_adaptive_tx_coalesce;
+
+ /* When the packet rate (measured in packets per second)
+ * is below pkt_rate_low, the {rx,tx}_*_low parameters are
+ * used.
+ */
+ u32 pkt_rate_low;
+ u32 rx_coalesce_usecs_low;
+ u32 rx_max_coalesced_frames_low;
+ u32 tx_coalesce_usecs_low;
+ u32 tx_max_coalesced_frames_low;
+
+ /* When the packet rate is below pkt_rate_high but above
+ * pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+
+ /* When the packet rate is (measured in packets per second)
+ * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+ * used.
+ */
+ u32 pkt_rate_high;
+ u32 rx_coalesce_usecs_high;
+ u32 rx_max_coalesced_frames_high;
+ u32 tx_coalesce_usecs_high;
+ u32 tx_max_coalesced_frames_high;
+
+ /* How often to do adaptive coalescing packet rate sampling,
+ * measured in seconds. Must not be zero.
+ */
+ u32 rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+ u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
+
+ /* Read only attributes. These indicate the maximum number
+ * of pending RX/TX ring entries the driver will allow the
+ * user to set.
+ */
+ u32 rx_max_pending;
+ u32 rx_mini_max_pending;
+ u32 rx_jumbo_max_pending;
+ u32 tx_max_pending;
+
+ /* Values changeable by the user. The valid values are
+ * in the range 1 to the "*_max_pending" counterpart above.
+ */
+ u32 rx_pending;
+ u32 rx_mini_pending;
+ u32 rx_jumbo_pending;
+ u32 tx_pending;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+ u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
+
+ /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+ * being true) the user may set 'autonet' here non-zero to have the
+ * pause parameters be auto-negotiated too. In such a case, the
+ * {rx,tx}_pause values below determine what capabilities are
+ * advertised.
+ *
+ * If 'autoneg' is zero or the link is not being auto-negotiated,
+ * then {rx,tx}_pause force the driver to use/not-use pause
+ * flow control.
+ */
+ u32 autoneg;
+ u32 rx_pause;
+ u32 tx_pause;
+};
+
+#define ETH_GSTRING_LEN 32
+enum ethtool_stringset {
+ ETH_SS_TEST = 0,
+ ETH_SS_STATS,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+ u32 cmd; /* ETHTOOL_GSTRINGS */
+ u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
+ u32 len; /* number of strings in the string set */
+ u8 data[0];
+};
+
+enum ethtool_test_flags {
+ ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
+ ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+ u32 cmd; /* ETHTOOL_TEST */
+ u32 flags; /* ETH_TEST_FL_xxx */
+ u32 reserved;
+ u32 len; /* result length, in number of u64 elements */
+ u64 data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+ u32 cmd; /* ETHTOOL_GSTATS */
+ u32 n_stats; /* number of u64's being returned */
+ u64 data[0];
+};
+
+struct net_device;
+
+/* Some generic methods drivers may use in their ethtool_ops */
+u32 ethtool_op_get_link(struct net_device *dev);
+u32 ethtool_op_get_tx_csum(struct net_device *dev);
+int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
+u32 ethtool_op_get_sg(struct net_device *dev);
+int ethtool_op_set_sg(struct net_device *dev, u32 data);
+u32 ethtool_op_get_tso(struct net_device *dev);
+int ethtool_op_set_tso(struct net_device *dev, u32 data);
+
+/**
+ * &ethtool_ops - Alter and report network device settings
+ * get_settings: Get device-specific settings
+ * set_settings: Set device-specific settings
+ * get_drvinfo: Report driver information
+ * get_regs: Get device registers
+ * get_wol: Report whether Wake-on-Lan is enabled
+ * set_wol: Turn Wake-on-Lan on or off
+ * get_msglevel: Report driver message level
+ * set_msglevel: Set driver message level
+ * nway_reset: Restart autonegotiation
+ * get_link: Get link status
+ * get_eeprom: Read data from the device EEPROM
+ * set_eeprom: Write data to the device EEPROM
+ * get_coalesce: Get interrupt coalescing parameters
+ * set_coalesce: Set interrupt coalescing parameters
+ * get_ringparam: Report ring sizes
+ * set_ringparam: Set ring sizes
+ * get_pauseparam: Report pause parameters
+ * set_pauseparam: Set pause paramters
+ * get_rx_csum: Report whether receive checksums are turned on or off
+ * set_rx_csum: Turn receive checksum on or off
+ * get_tx_csum: Report whether transmit checksums are turned on or off
+ * set_tx_csum: Turn transmit checksums on or off
+ * get_sg: Report whether scatter-gather is enabled
+ * set_sg: Turn scatter-gather on or off
+ * get_tso: Report whether TCP segmentation offload is enabled
+ * set_tso: Turn TCP segmentation offload on or off
+ * self_test: Run specified self-tests
+ * get_strings: Return a set of strings that describe the requested objects
+ * phys_id: Identify the device
+ * get_stats: Return statistics about the device
+ *
+ * Description:
+ *
+ * get_settings:
+ * @get_settings is passed an &ethtool_cmd to fill in. It returns
+ * an negative errno or zero.
+ *
+ * set_settings:
+ * @set_settings is passed an &ethtool_cmd and should attempt to set
+ * all the settings this device supports. It may return an error value
+ * if something goes wrong (otherwise 0).
+ *
+ * get_eeprom:
+ * Should fill in the magic field. Don't need to check len for zero
+ * or wraparound. Fill in the data argument with the eeprom values
+ * from offset to offset + len. Update len to the amount read.
+ * Returns an error or zero.
+ *
+ * set_eeprom:
+ * Should validate the magic field. Don't need to check len for zero
+ * or wraparound. Update len to the amount written. Returns an error
+ * or zero.
+ */
+struct ethtool_ops {
+ int (*get_settings)(struct net_device *, struct ethtool_cmd *);
+ int (*set_settings)(struct net_device *, struct ethtool_cmd *);
+ void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
+ int (*get_regs_len)(struct net_device *);
+ void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
+ void (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
+ int (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
+ u32 (*get_msglevel)(struct net_device *);
+ void (*set_msglevel)(struct net_device *, u32);
+ int (*nway_reset)(struct net_device *);
+ u32 (*get_link)(struct net_device *);
+ int (*get_eeprom_len)(struct net_device *);
+ int (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
+ int (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
+ int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
+ int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
+ void (*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
+ int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
+ void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
+ int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
+ u32 (*get_rx_csum)(struct net_device *);
+ int (*set_rx_csum)(struct net_device *, u32);
+ u32 (*get_tx_csum)(struct net_device *);
+ int (*set_tx_csum)(struct net_device *, u32);
+ u32 (*get_sg)(struct net_device *);
+ int (*set_sg)(struct net_device *, u32);
+ u32 (*get_tso)(struct net_device *);
+ int (*set_tso)(struct net_device *, u32);
+ int (*self_test_count)(struct net_device *);
+ void (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
+ void (*get_strings)(struct net_device *, u32 stringset, u8 *);
+ int (*phys_id)(struct net_device *, u32);
+ int (*get_stats_count)(struct net_device *);
+ void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
+ int (*begin)(struct net_device *);
+ void (*complete)(struct net_device *);
+};
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET 0x00000001 /* Get settings. */
+#define ETHTOOL_SSET 0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
+#define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
+ * (ethtool_value) */
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
+ * (ethtool_value). */
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET ETHTOOL_GSET
+#define SPARC_ETH_SSET ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half (1 << 0)
+#define SUPPORTED_10baseT_Full (1 << 1)
+#define SUPPORTED_100baseT_Half (1 << 2)
+#define SUPPORTED_100baseT_Full (1 << 3)
+#define SUPPORTED_1000baseT_Half (1 << 4)
+#define SUPPORTED_1000baseT_Full (1 << 5)
+#define SUPPORTED_Autoneg (1 << 6)
+#define SUPPORTED_TP (1 << 7)
+#define SUPPORTED_AUI (1 << 8)
+#define SUPPORTED_MII (1 << 9)
+#define SUPPORTED_FIBRE (1 << 10)
+#define SUPPORTED_BNC (1 << 11)
+#define SUPPORTED_10000baseT_Full (1 << 12)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half (1 << 0)
+#define ADVERTISED_10baseT_Full (1 << 1)
+#define ADVERTISED_100baseT_Half (1 << 2)
+#define ADVERTISED_100baseT_Full (1 << 3)
+#define ADVERTISED_1000baseT_Half (1 << 4)
+#define ADVERTISED_1000baseT_Full (1 << 5)
+#define ADVERTISED_Autoneg (1 << 6)
+#define ADVERTISED_TP (1 << 7)
+#define ADVERTISED_AUI (1 << 8)
+#define ADVERTISED_MII (1 << 9)
+#define ADVERTISED_FIBRE (1 << 10)
+#define ADVERTISED_BNC (1 << 11)
+#define ADVERTISED_10000baseT_Full (1 << 12)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things. When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was foced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define SPEED_10000 10000
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+
+/* Which connector port. */
+#define PORT_TP 0x00
+#define PORT_AUI 0x01
+#define PORT_MII 0x02
+#define PORT_FIBRE 0x03
+#define PORT_BNC 0x04
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL 0x00
+#define XCVR_EXTERNAL 0x01
+#define XCVR_DUMMY1 0x02
+#define XCVR_DUMMY2 0x03
+#define XCVR_DUMMY3 0x04
+
+/* Enable or disable autonegotiation. If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE 0x00
+#define AUTONEG_ENABLE 0x01
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY (1 << 0)
+#define WAKE_UCAST (1 << 1)
+#define WAKE_MCAST (1 << 2)
+#define WAKE_BCAST (1 << 3)
+#define WAKE_ARP (1 << 4)
+#define WAKE_MAGIC (1 << 5)
+#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
+
+#endif /* _LINUX_ETHTOOL_H */