diff options
author | Heiko Stübner <heiko@sntech.de> | 2013-06-06 16:44:25 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2013-06-16 11:56:51 +0200 |
commit | 7970cb770dffa23cb20a36f46602e688e075f5d9 (patch) | |
tree | 4a375606b2664a493719a636d06b1ca13dc4328e /include/linux/pinctrl | |
parent | 78bafc66180d42f972b443b0b573a1b6ff9aa522 (diff) | |
download | linux-stable-7970cb770dffa23cb20a36f46602e688e075f5d9.tar.gz linux-stable-7970cb770dffa23cb20a36f46602e688e075f5d9.tar.bz2 linux-stable-7970cb770dffa23cb20a36f46602e688e075f5d9.zip |
pinctrl: add pinconf-generic define for a pin-default pull
There exist controllers that don't support to set the pull to up or down
separately but instead automatically set the pull direction based on
embedded knowledge inside the controller, for example depending on the
selected mux function of the pin.
Therefore this patch adds another config option to use this default
pull-state for a pin where it is not possible to know or decide if the
pin will be pulled up or down.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/linux/pinctrl')
-rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index ac05b3cfeacc..d414a7729424 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -40,6 +40,10 @@ * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high * impedance to GROUND). If the argument is != 0 pull-down is enabled, * if it is 0, pull-down is disabled. + * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based + * on embedded knowledge of the controller, like current mux function. + * If the argument is != 0 pull up/down is enabled, if it is 0, + * the pull is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two * active transistors on the output. Setting this config will enable @@ -86,6 +90,7 @@ enum pin_config_param { PIN_CONFIG_BIAS_BUS_HOLD, PIN_CONFIG_BIAS_PULL_UP, PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, PIN_CONFIG_DRIVE_PUSH_PULL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, |