Merge tag 'usb-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.2 merge window

- dwc2 adds hibernation support
- preparation for sunxi glue to musb driver
- new ULPI bus
- new ULPI PHY driver for TUSB1210
- musb patches to support multiple DMA engines on same binary
- support for R-Car E2 on renesas_usbhs

Signed-off-by: Felipe Balbi <balbi@ti.com>

12 files changed, 294 insertions, 134 deletions

diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 3bfd56778c29..7ab00d61d30a 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -629,4 +629,10 @@ struct mcb_device_id {
 	kernel_ulong_t driver_data;
 };
 
+struct ulpi_device_id {
+	__u16 vendor;
+	__u16 product;
+	kernel_ulong_t driver_data;
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/phy/phy-sun4i-usb.h b/include/linux/phy/phy-sun4i-usb.h
new file mode 100644
index 000000000000..50aed92ea89c
--- /dev/null
+++ b/include/linux/phy/phy-sun4i-usb.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PHY_SUN4I_USB_H_
+#define PHY_SUN4I_USB_H_
+
+#include "phy.h"
+
+/**
+ * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
+ * @phy: reference to a sun4i usb phy
+ * @enabled: wether to enable or disable squelch detect
+ */
+void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled);
+
+#endif
diff --git a/include/linux/ulpi/driver.h b/include/linux/ulpi/driver.h
new file mode 100644
index 000000000000..388f6e08b9d4
--- /dev/null
+++ b/include/linux/ulpi/driver.h
@@ -0,0 +1,60 @@
+#ifndef __LINUX_ULPI_DRIVER_H
+#define __LINUX_ULPI_DRIVER_H
+
+#include <linux/mod_devicetable.h>
+
+#include <linux/device.h>
+
+struct ulpi_ops;
+
+/**
+ * struct ulpi - describes ULPI PHY device
+ * @id: vendor and product ids for ULPI device
+ * @ops: I/O access
+ * @dev: device interface
+ */
+struct ulpi {
+	struct ulpi_device_id id;
+	struct ulpi_ops *ops;
+	struct device dev;
+};
+
+#define to_ulpi_dev(d) container_of(d, struct ulpi, dev)
+
+static inline void ulpi_set_drvdata(struct ulpi *ulpi, void *data)
+{
+	dev_set_drvdata(&ulpi->dev, data);
+}
+
+static inline void *ulpi_get_drvdata(struct ulpi *ulpi)
+{
+	return dev_get_drvdata(&ulpi->dev);
+}
+
+/**
+ * struct ulpi_driver - describes a ULPI PHY driver
+ * @id_table: array of device identifiers supported by this driver
+ * @probe: binds this driver to ULPI device
+ * @remove: unbinds this driver from ULPI device
+ * @driver: the name and owner members must be initialized by the drivers
+ */
+struct ulpi_driver {
+	const struct ulpi_device_id *id_table;
+	int (*probe)(struct ulpi *ulpi);
+	void (*remove)(struct ulpi *ulpi);
+	struct device_driver driver;
+};
+
+#define to_ulpi_driver(d) container_of(d, struct ulpi_driver, driver)
+
+int ulpi_register_driver(struct ulpi_driver *drv);
+void ulpi_unregister_driver(struct ulpi_driver *drv);
+
+#define module_ulpi_driver(__ulpi_driver) \
+	module_driver(__ulpi_driver, ulpi_register_driver, \
+		      ulpi_unregister_driver)
+
+int ulpi_read(struct ulpi *ulpi, u8 addr);
+int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val);
+
+#endif /* __LINUX_ULPI_DRIVER_H */
diff --git a/include/linux/ulpi/interface.h b/include/linux/ulpi/interface.h
new file mode 100644
index 000000000000..4de8ab491038
--- /dev/null
+++ b/include/linux/ulpi/interface.h
@@ -0,0 +1,23 @@
+#ifndef __LINUX_ULPI_INTERFACE_H
+#define __LINUX_ULPI_INTERFACE_H
+
+#include <linux/types.h>
+
+struct ulpi;
+
+/**
+ * struct ulpi_ops - ULPI register access
+ * @dev: the interface provider
+ * @read: read operation for ULPI register access
+ * @write: write operation for ULPI register access
+ */
+struct ulpi_ops {
+	struct device *dev;
+	int (*read)(struct ulpi_ops *ops, u8 addr);
+	int (*write)(struct ulpi_ops *ops, u8 addr, u8 val);
+};
+
+struct ulpi *ulpi_register_interface(struct device *, struct ulpi_ops *);
+void ulpi_unregister_interface(struct ulpi *);
+
+#endif /* __LINUX_ULPI_INTERFACE_H */
diff --git a/include/linux/ulpi/regs.h b/include/linux/ulpi/regs.h
new file mode 100644
index 000000000000..b5b8b8804560
--- /dev/null
+++ b/include/linux/ulpi/regs.h
@@ -0,0 +1,130 @@
+#ifndef __LINUX_ULPI_REGS_H
+#define __LINUX_ULPI_REGS_H
+
+/*
+ * Macros for Set and Clear
+ * See ULPI 1.1 specification to find the registers with Set and Clear offsets
+ */
+#define ULPI_SET(a)				(a + 1)
+#define ULPI_CLR(a)				(a + 2)
+
+/*
+ * Register Map
+ */
+#define ULPI_VENDOR_ID_LOW			0x00
+#define ULPI_VENDOR_ID_HIGH			0x01
+#define ULPI_PRODUCT_ID_LOW			0x02
+#define ULPI_PRODUCT_ID_HIGH			0x03
+#define ULPI_FUNC_CTRL				0x04
+#define ULPI_IFC_CTRL				0x07
+#define ULPI_OTG_CTRL				0x0a
+#define ULPI_USB_INT_EN_RISE			0x0d
+#define ULPI_USB_INT_EN_FALL			0x10
+#define ULPI_USB_INT_STS			0x13
+#define ULPI_USB_INT_LATCH			0x14
+#define ULPI_DEBUG				0x15
+#define ULPI_SCRATCH				0x16
+/* Optional Carkit Registers */
+#define ULPI_CARKIT_CTRL			0x19
+#define ULPI_CARKIT_INT_DELAY			0x1c
+#define ULPI_CARKIT_INT_EN			0x1d
+#define ULPI_CARKIT_INT_STS			0x20
+#define ULPI_CARKIT_INT_LATCH			0x21
+#define ULPI_CARKIT_PLS_CTRL			0x22
+/* Other Optional Registers */
+#define ULPI_TX_POS_WIDTH			0x25
+#define ULPI_TX_NEG_WIDTH			0x26
+#define ULPI_POLARITY_RECOVERY			0x27
+/* Access Extended Register Set */
+#define ULPI_ACCESS_EXTENDED			0x2f
+/* Vendor Specific */
+#define ULPI_VENDOR_SPECIFIC			0x30
+/* Extended Registers */
+#define ULPI_EXT_VENDOR_SPECIFIC		0x80
+
+/*
+ * Register Bits
+ */
+
+/* Function Control */
+#define ULPI_FUNC_CTRL_XCVRSEL			BIT(0)
+#define  ULPI_FUNC_CTRL_XCVRSEL_MASK		0x3
+#define  ULPI_FUNC_CTRL_HIGH_SPEED		0x0
+#define  ULPI_FUNC_CTRL_FULL_SPEED		0x1
+#define  ULPI_FUNC_CTRL_LOW_SPEED		0x2
+#define  ULPI_FUNC_CTRL_FS4LS			0x3
+#define ULPI_FUNC_CTRL_TERMSELECT		BIT(2)
+#define ULPI_FUNC_CTRL_OPMODE			BIT(3)
+#define  ULPI_FUNC_CTRL_OPMODE_MASK		(0x3 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NORMAL		(0x0 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING	(0x1 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI	(0x2 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP	(0x3 << 3)
+#define ULPI_FUNC_CTRL_RESET			BIT(5)
+#define ULPI_FUNC_CTRL_SUSPENDM			BIT(6)
+
+/* Interface Control */
+#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE		BIT(0)
+#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE		BIT(1)
+#define ULPI_IFC_CTRL_CARKITMODE		BIT(2)
+#define ULPI_IFC_CTRL_CLOCKSUSPENDM		BIT(3)
+#define ULPI_IFC_CTRL_AUTORESUME		BIT(4)
+#define ULPI_IFC_CTRL_EXTERNAL_VBUS		BIT(5)
+#define ULPI_IFC_CTRL_PASSTHRU			BIT(6)
+#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE	BIT(7)
+
+/* OTG Control */
+#define ULPI_OTG_CTRL_ID_PULLUP			BIT(0)
+#define ULPI_OTG_CTRL_DP_PULLDOWN		BIT(1)
+#define ULPI_OTG_CTRL_DM_PULLDOWN		BIT(2)
+#define ULPI_OTG_CTRL_DISCHRGVBUS		BIT(3)
+#define ULPI_OTG_CTRL_CHRGVBUS			BIT(4)
+#define ULPI_OTG_CTRL_DRVVBUS			BIT(5)
+#define ULPI_OTG_CTRL_DRVVBUS_EXT		BIT(6)
+#define ULPI_OTG_CTRL_EXTVBUSIND		BIT(7)
+
+/* USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT		BIT(0)
+#define ULPI_INT_VBUS_VALID			BIT(1)
+#define ULPI_INT_SESS_VALID			BIT(2)
+#define ULPI_INT_SESS_END			BIT(3)
+#define ULPI_INT_IDGRD				BIT(4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0			BIT(0)
+#define ULPI_DEBUG_LINESTATE1			BIT(1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR		BIT(0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV		BIT(1)
+#define ULPI_CARKIT_CTRL_TXDEN			BIT(2)
+#define ULPI_CARKIT_CTRL_RXDEN			BIT(3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN		BIT(4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN		BIT(5)
+#define ULPI_CARKIT_CTRL_MICEN			BIT(6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE		BIT(0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL		BIT(1)
+#define ULPI_CARKIT_INT_EN_CARINTDET		BIT(2)
+#define ULPI_CARKIT_INT_EN_DP_RISE		BIT(3)
+#define ULPI_CARKIT_INT_EN_DP_FALL		BIT(4)
+
+/* Carkit Interrupt Status and
+ * Carkit Interrupt Latch
+ */
+#define ULPI_CARKIT_INT_IDFLOAT			BIT(0)
+#define ULPI_CARKIT_INT_CARINTDET		BIT(1)
+#define ULPI_CARKIT_INT_DP			BIT(2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN		BIT(0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN		BIT(1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	BIT(2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	BIT(3)
+
+#endif /* __LINUX_ULPI_REGS_H */
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 7dbecf9a4656..e55a1504266e 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -18,6 +18,7 @@
 #ifndef __ASM_ARCH_MSM_HSUSB_H
 #define __ASM_ARCH_MSM_HSUSB_H
 
+#include <linux/extcon.h>
 #include <linux/types.h>
 #include <linux/usb/otg.h>
 #include <linux/clk.h>
@@ -120,6 +121,17 @@ struct msm_otg_platform_data {
 };
 
 /**
+ * struct msm_usb_cable - structure for exteternal connector cable
+ *			  state tracking
+ * @nb: hold event notification callback
+ * @conn: used for notification registration
+ */
+struct msm_usb_cable {
+	struct notifier_block		nb;
+	struct extcon_specific_cable_nb conn;
+};
+
+/**
  * struct msm_otg: OTG driver data. Shared by HCD and DCD.
  * @otg: USB OTG Transceiver structure.
  * @pdata: otg device platform data.
@@ -138,6 +150,11 @@ struct msm_otg_platform_data {
  * @chg_type: The type of charger attached.
  * @dcd_retires: The retry count used to track Data contact
  *               detection process.
+ * @manual_pullup: true if VBUS is not routed to USB controller/phy
+ *	and controller driver therefore enables pull-up explicitly before
+ *	starting controller using usbcmd run/stop bit.
+ * @vbus: VBUS signal state trakining, using extcon framework
+ * @id: ID signal state trakining, using extcon framework
  */
 struct msm_otg {
 	struct usb_phy phy;
@@ -166,6 +183,11 @@ struct msm_otg {
 	struct reset_control *phy_rst;
 	struct reset_control *link_rst;
 	int vdd_levels[3];
+
+	bool manual_pullup;
+
+	struct msm_usb_cable vbus;
+	struct msm_usb_cable id;
 };
 
 #endif
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
index a29f6030afb1..e159b39f67a2 100644
--- a/include/linux/usb/msm_hsusb_hw.h
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -21,6 +21,8 @@
 
 #define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
 #define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
+#define USB_GENCONFIG_2      (MSM_USB_BASE + 0x00a0)
+
 #define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
 
 #define USB_USBCMD           (MSM_USB_BASE + 0x0140)
@@ -30,6 +32,9 @@
 #define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
 #define USB_PHY_CTRL2        (MSM_USB_BASE + 0x0278)
 
+#define GENCONFIG_2_SESS_VLD_CTRL_EN	BIT(7)
+#define USBCMD_SESS_VLD_CTRL		BIT(25)
+
 #define USBCMD_RESET   2
 #define USB_USBINTR          (MSM_USB_BASE + 0x0148)
 
@@ -50,6 +55,10 @@
 #define ULPI_PWR_CLK_MNG_REG	0x88
 #define OTG_COMP_DISABLE	BIT(0)
 
+#define ULPI_MISC_A			0x96
+#define ULPI_MISC_A_VBUSVLDEXTSEL	BIT(1)
+#define ULPI_MISC_A_VBUSVLDEXT		BIT(0)
+
 #define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
 #define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
 #define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
index 148b8fa5b1a2..725120224472 100644
--- a/include/linux/usb/net2280.h
+++ b/include/linux/usb/net2280.h
@@ -168,6 +168,9 @@ struct net2280_regs {
 #define     ENDPOINT_B_INTERRUPT                                2
 #define     ENDPOINT_A_INTERRUPT                                1
 #define     ENDPOINT_0_INTERRUPT                                0
+#define     USB3380_IRQSTAT0_EP_INTR_MASK_IN (0xF << 17)
+#define     USB3380_IRQSTAT0_EP_INTR_MASK_OUT (0xF << 1)
+
 	u32		irqstat1;
 #define     POWER_STATE_CHANGE_INTERRUPT                        27
 #define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index bc91b5d380fd..e39f251cf861 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -205,6 +205,8 @@ extern struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index);
 extern struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index);
 extern struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
 	const char *phandle, u8 index);
+extern struct usb_phy *devm_usb_get_phy_by_node(struct device *dev,
+	struct device_node *node, struct notifier_block *nb);
 extern void usb_put_phy(struct usb_phy *);
 extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
 extern int usb_bind_phy(const char *dev_name, u8 index,
@@ -238,6 +240,12 @@ static inline struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
 	return ERR_PTR(-ENXIO);
 }
 
+static inline struct usb_phy *devm_usb_get_phy_by_node(struct device *dev,
+	struct device_node *node, struct notifier_block *nb)
+{
+	return ERR_PTR(-ENXIO);
+}
+
 static inline void usb_put_phy(struct usb_phy *x)
 {
 }
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index f06529c14141..3dd5a781da99 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -169,8 +169,7 @@ struct renesas_usbhs_driver_param {
 #define USBHS_USB_DMAC_XFER_SIZE	32	/* hardcode the xfer size */
 };
 
-#define USBHS_TYPE_R8A7790 1
-#define USBHS_TYPE_R8A7791 2
+#define USBHS_TYPE_RCAR_GEN2	1
 
 /*
  * option:
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 5c295c26ad37..5f07407a367a 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -12,6 +12,8 @@
 #define __LINUX_USB_ULPI_H
 
 #include <linux/usb/otg.h>
+#include <linux/ulpi/regs.h>
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -49,138 +51,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-/*
- * Macros for Set and Clear
- * See ULPI 1.1 specification to find the registers with Set and Clear offsets
- */
-#define ULPI_SET(a)				(a + 1)
-#define ULPI_CLR(a)				(a + 2)
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Register Map
- */
-#define ULPI_VENDOR_ID_LOW			0x00
-#define ULPI_VENDOR_ID_HIGH			0x01
-#define ULPI_PRODUCT_ID_LOW			0x02
-#define ULPI_PRODUCT_ID_HIGH			0x03
-#define ULPI_FUNC_CTRL				0x04
-#define ULPI_IFC_CTRL				0x07
-#define ULPI_OTG_CTRL				0x0a
-#define ULPI_USB_INT_EN_RISE			0x0d
-#define ULPI_USB_INT_EN_FALL			0x10
-#define ULPI_USB_INT_STS			0x13
-#define ULPI_USB_INT_LATCH			0x14
-#define ULPI_DEBUG				0x15
-#define ULPI_SCRATCH				0x16
-/* Optional Carkit Registers */
-#define ULPI_CARCIT_CTRL			0x19
-#define ULPI_CARCIT_INT_DELAY			0x1c
-#define ULPI_CARCIT_INT_EN			0x1d
-#define ULPI_CARCIT_INT_STS			0x20
-#define ULPI_CARCIT_INT_LATCH			0x21
-#define ULPI_CARCIT_PLS_CTRL			0x22
-/* Other Optional Registers */
-#define ULPI_TX_POS_WIDTH			0x25
-#define ULPI_TX_NEG_WIDTH			0x26
-#define ULPI_POLARITY_RECOVERY			0x27
-/* Access Extended Register Set */
-#define ULPI_ACCESS_EXTENDED			0x2f
-/* Vendor Specific */
-#define ULPI_VENDOR_SPECIFIC			0x30
-/* Extended Registers */
-#define ULPI_EXT_VENDOR_SPECIFIC		0x80
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Register Bits
- */
-
-/* Function Control */
-#define ULPI_FUNC_CTRL_XCVRSEL			(1 << 0)
-#define  ULPI_FUNC_CTRL_XCVRSEL_MASK		(3 << 0)
-#define  ULPI_FUNC_CTRL_HIGH_SPEED		(0 << 0)
-#define  ULPI_FUNC_CTRL_FULL_SPEED		(1 << 0)
-#define  ULPI_FUNC_CTRL_LOW_SPEED		(2 << 0)
-#define  ULPI_FUNC_CTRL_FS4LS			(3 << 0)
-#define ULPI_FUNC_CTRL_TERMSELECT		(1 << 2)
-#define ULPI_FUNC_CTRL_OPMODE			(1 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_MASK		(3 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_NORMAL		(0 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING	(1 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI	(2 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP	(3 << 3)
-#define ULPI_FUNC_CTRL_RESET			(1 << 5)
-#define ULPI_FUNC_CTRL_SUSPENDM			(1 << 6)
-
-/* Interface Control */
-#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE		(1 << 0)
-#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE		(1 << 1)
-#define ULPI_IFC_CTRL_CARKITMODE		(1 << 2)
-#define ULPI_IFC_CTRL_CLOCKSUSPENDM		(1 << 3)
-#define ULPI_IFC_CTRL_AUTORESUME		(1 << 4)
-#define ULPI_IFC_CTRL_EXTERNAL_VBUS		(1 << 5)
-#define ULPI_IFC_CTRL_PASSTHRU			(1 << 6)
-#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE	(1 << 7)
-
-/* OTG Control */
-#define ULPI_OTG_CTRL_ID_PULLUP			(1 << 0)
-#define ULPI_OTG_CTRL_DP_PULLDOWN		(1 << 1)
-#define ULPI_OTG_CTRL_DM_PULLDOWN		(1 << 2)
-#define ULPI_OTG_CTRL_DISCHRGVBUS		(1 << 3)
-#define ULPI_OTG_CTRL_CHRGVBUS			(1 << 4)
-#define ULPI_OTG_CTRL_DRVVBUS			(1 << 5)
-#define ULPI_OTG_CTRL_DRVVBUS_EXT		(1 << 6)
-#define ULPI_OTG_CTRL_EXTVBUSIND		(1 << 7)
-
-/* USB Interrupt Enable Rising,
- * USB Interrupt Enable Falling,
- * USB Interrupt Status and
- * USB Interrupt Latch
- */
-#define ULPI_INT_HOST_DISCONNECT		(1 << 0)
-#define ULPI_INT_VBUS_VALID			(1 << 1)
-#define ULPI_INT_SESS_VALID			(1 << 2)
-#define ULPI_INT_SESS_END			(1 << 3)
-#define ULPI_INT_IDGRD				(1 << 4)
-
-/* Debug */
-#define ULPI_DEBUG_LINESTATE0			(1 << 0)
-#define ULPI_DEBUG_LINESTATE1			(1 << 1)
-
-/* Carkit Control */
-#define ULPI_CARKIT_CTRL_CARKITPWR		(1 << 0)
-#define ULPI_CARKIT_CTRL_IDGNDDRV		(1 << 1)
-#define ULPI_CARKIT_CTRL_TXDEN			(1 << 2)
-#define ULPI_CARKIT_CTRL_RXDEN			(1 << 3)
-#define ULPI_CARKIT_CTRL_SPKLEFTEN		(1 << 4)
-#define ULPI_CARKIT_CTRL_SPKRIGHTEN		(1 << 5)
-#define ULPI_CARKIT_CTRL_MICEN			(1 << 6)
-
-/* Carkit Interrupt Enable */
-#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE		(1 << 0)
-#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL		(1 << 1)
-#define ULPI_CARKIT_INT_EN_CARINTDET		(1 << 2)
-#define ULPI_CARKIT_INT_EN_DP_RISE		(1 << 3)
-#define ULPI_CARKIT_INT_EN_DP_FALL		(1 << 4)
-
-/* Carkit Interrupt Status and
- * Carkit Interrupt Latch
- */
-#define ULPI_CARKIT_INT_IDFLOAT			(1 << 0)
-#define ULPI_CARKIT_INT_CARINTDET		(1 << 1)
-#define ULPI_CARKIT_INT_DP			(1 << 2)
-
-/* Carkit Pulse Control*/
-#define ULPI_CARKIT_PLS_CTRL_TXPLSEN		(1 << 0)
-#define ULPI_CARKIT_PLS_CTRL_RXPLSEN		(1 << 1)
-#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	(1 << 2)
-#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	(1 << 3)
-
-/*-------------------------------------------------------------------------*/
-
 #if IS_ENABLED(CONFIG_USB_ULPI)
 struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
 					unsigned int flags);
diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h
index f92eb635b9d3..11525d8d89a7 100644
--- a/include/linux/usb/usb338x.h
+++ b/include/linux/usb/usb338x.h
@@ -43,6 +43,10 @@
 #define     IN_ENDPOINT_TYPE                    12
 #define     OUT_ENDPOINT_ENABLE                 10
 #define     OUT_ENDPOINT_TYPE                    8
+#define USB3380_EP_CFG_MASK_IN ((0x3 << IN_ENDPOINT_TYPE) | \
+				BIT(IN_ENDPOINT_ENABLE))
+#define USB3380_EP_CFG_MASK_OUT ((0x3 << OUT_ENDPOINT_TYPE) | \
+				BIT(OUT_ENDPOINT_ENABLE))
 
 struct usb338x_usb_ext_regs {
 	u32     usbclass;