summaryrefslogtreecommitdiffstats
path: root/net
diff options
context:
space:
mode:
authorAlexander Aring <alex.aring@gmail.com>2015-09-18 11:30:43 +0200
committerMarcel Holtmann <marcel@holtmann.org>2015-09-22 11:51:20 +0200
commit87a93e4eceb495f93e3f37b100334d2641765b6c (patch)
treed917662b1912a9788cdf431fc735b243e32dfb6c /net
parent838b83d63d2909f9136f3030dc4fffa8230c31da (diff)
downloadlinux-stable-87a93e4eceb495f93e3f37b100334d2641765b6c.tar.gz
linux-stable-87a93e4eceb495f93e3f37b100334d2641765b6c.tar.bz2
linux-stable-87a93e4eceb495f93e3f37b100334d2641765b6c.zip
ieee802154: change needed headroom/tailroom
This patch cleanups needed_headroom, needed_tailroom and hard_header_len fields for wpan and lowpan interfaces. For wpan interfaces the worst case mac header len should be part of needed_headroom, currently this is set as hard_header_len, but hard_header_len should be set to the minimum header length which xmit call assumes and this is the minimum frame length of 802.15.4. The hard_header_len value will check inside send callbacl of AF_PACKET raw sockets. For lowpan interfaces, if fragmentation isn't needed the skb will call dev_hard_header for 802154 layer and queue it afterwards. This happens without new skb allocation, so we need the same headroom and tailroom lengths like 802154 inside 802154 6lowpan layer. At least we assume as minimum header length an ipv6 header size. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'net')
-rw-r--r--net/6lowpan/nhc.h2
-rw-r--r--net/ieee802154/6lowpan/core.c14
-rw-r--r--net/ieee802154/6lowpan/tx.c12
-rw-r--r--net/ieee802154/header_ops.c2
-rw-r--r--net/mac802154/iface.c17
-rw-r--r--net/mac802154/tx.c3
6 files changed, 36 insertions, 14 deletions
diff --git a/net/6lowpan/nhc.h b/net/6lowpan/nhc.h
index ed44938eb5de..c249f17fa37b 100644
--- a/net/6lowpan/nhc.h
+++ b/net/6lowpan/nhc.h
@@ -8,8 +8,6 @@
#include <net/6lowpan.h>
#include <net/ipv6.h>
-#define LOWPAN_NHC_MAX_ID_LEN 1
-
/**
* LOWPAN_NHC - helper macro to generate nh id fields and lowpan_nhc struct
*
diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c
index 9f0cfa598e3a..44420ed95574 100644
--- a/net/ieee802154/6lowpan/core.c
+++ b/net/ieee802154/6lowpan/core.c
@@ -104,9 +104,8 @@ static void lowpan_setup(struct net_device *ldev)
ldev->addr_len = IEEE802154_ADDR_LEN;
memset(ldev->broadcast, 0xff, IEEE802154_ADDR_LEN);
ldev->type = ARPHRD_6LOWPAN;
- /* Frame Control + Sequence Number + Address fields + Security Header */
- ldev->hard_header_len = 2 + 1 + 20 + 14;
- ldev->needed_tailroom = 2; /* FCS */
+ /* We need an ipv6hdr as minimum len when calling xmit */
+ ldev->hard_header_len = sizeof(struct ipv6hdr);
ldev->mtu = IPV6_MIN_MTU;
ldev->priv_flags |= IFF_NO_QUEUE;
ldev->flags = IFF_BROADCAST | IFF_MULTICAST;
@@ -156,6 +155,15 @@ static int lowpan_newlink(struct net *src_net, struct net_device *ldev,
lowpan_dev_info(ldev)->wdev = wdev;
/* Set the lowpan hardware address to the wpan hardware address. */
memcpy(ldev->dev_addr, wdev->dev_addr, IEEE802154_ADDR_LEN);
+ /* We need headroom for possible wpan_dev_hard_header call and tailroom
+ * for encryption/fcs handling. The lowpan interface will replace
+ * the IPv6 header with 6LoWPAN header. At worst case the 6LoWPAN
+ * header has LOWPAN_IPHC_MAX_HEADER_LEN more bytes than the IPv6
+ * header.
+ */
+ ldev->needed_headroom = LOWPAN_IPHC_MAX_HEADER_LEN +
+ wdev->needed_headroom;
+ ldev->needed_tailroom = wdev->needed_tailroom;
lowpan_netdev_setup(ldev, LOWPAN_LLTYPE_IEEE802154);
diff --git a/net/ieee802154/6lowpan/tx.c b/net/ieee802154/6lowpan/tx.c
index 6067e064a3fe..7e0563eaea98 100644
--- a/net/ieee802154/6lowpan/tx.c
+++ b/net/ieee802154/6lowpan/tx.c
@@ -10,6 +10,7 @@
#include <net/6lowpan.h>
#include <net/ieee802154_netdev.h>
+#include <net/mac802154.h>
#include "6lowpan_i.h"
@@ -36,6 +37,13 @@ lowpan_addr_info *lowpan_skb_priv(const struct sk_buff *skb)
sizeof(struct lowpan_addr_info));
}
+/* This callback will be called from AF_PACKET and IPv6 stack, the AF_PACKET
+ * sockets gives an 8 byte array for addresses only!
+ *
+ * TODO I think AF_PACKET DGRAM (sending/receiving) RAW (sending) makes no
+ * sense here. We should disable it, the right use-case would be AF_INET6
+ * RAW/DGRAM sockets.
+ */
int lowpan_header_create(struct sk_buff *skb, struct net_device *ldev,
unsigned short type, const void *_daddr,
const void *_saddr, unsigned int len)
@@ -77,13 +85,13 @@ lowpan_alloc_frag(struct sk_buff *skb, int size,
struct sk_buff *frag;
int rc;
- frag = alloc_skb(wdev->hard_header_len + wdev->needed_tailroom + size,
+ frag = alloc_skb(wdev->needed_headroom + wdev->needed_tailroom + size,
GFP_ATOMIC);
if (likely(frag)) {
frag->dev = wdev;
frag->priority = skb->priority;
- skb_reserve(frag, wdev->hard_header_len);
+ skb_reserve(frag, wdev->needed_headroom);
skb_reset_network_header(frag);
*mac_cb(frag) = *mac_cb(skb);
diff --git a/net/ieee802154/header_ops.c b/net/ieee802154/header_ops.c
index d8443b057022..c7439f0fbbdf 100644
--- a/net/ieee802154/header_ops.c
+++ b/net/ieee802154/header_ops.c
@@ -85,7 +85,7 @@ ieee802154_hdr_push_sechdr(u8 *buf, const struct ieee802154_sechdr *hdr)
int
ieee802154_hdr_push(struct sk_buff *skb, struct ieee802154_hdr *hdr)
{
- u8 buf[MAC802154_FRAME_HARD_HEADER_LEN];
+ u8 buf[IEEE802154_MAX_HEADER_LEN];
int pos = 2;
int rc;
struct ieee802154_hdr_fc *fc = &hdr->fc;
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index 8afe26d72971..b5a0936ce514 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -537,8 +537,18 @@ static void ieee802154_if_setup(struct net_device *dev)
dev->addr_len = IEEE802154_EXTENDED_ADDR_LEN;
memset(dev->broadcast, 0xff, IEEE802154_EXTENDED_ADDR_LEN);
- dev->hard_header_len = MAC802154_FRAME_HARD_HEADER_LEN;
- dev->needed_tailroom = 2 + 16; /* FCS + MIC */
+ /* Let hard_header_len set to IEEE802154_MIN_HEADER_LEN. AF_PACKET
+ * will not send frames without any payload, but ack frames
+ * has no payload, so substract one that we can send a 3 bytes
+ * frame. The xmit callback assumes at least a hard header where two
+ * bytes fc and sequence field are set.
+ */
+ dev->hard_header_len = IEEE802154_MIN_HEADER_LEN - 1;
+ /* The auth_tag header is for security and places in private payload
+ * room of mac frame which stucks between payload and FCS field.
+ */
+ dev->needed_tailroom = IEEE802154_MAX_AUTH_TAG_LEN +
+ IEEE802154_FCS_LEN;
dev->mtu = IEEE802154_MTU;
dev->tx_queue_len = 300;
dev->flags = IFF_NOARP | IFF_BROADCAST;
@@ -617,7 +627,8 @@ ieee802154_if_add(struct ieee802154_local *local, const char *name,
if (!ndev)
return ERR_PTR(-ENOMEM);
- ndev->needed_headroom = local->hw.extra_tx_headroom;
+ ndev->needed_headroom = local->hw.extra_tx_headroom +
+ IEEE802154_MAX_HEADER_LEN;
ret = dev_alloc_name(ndev, ndev->name);
if (ret < 0)
diff --git a/net/mac802154/tx.c b/net/mac802154/tx.c
index 7ed439172f30..66d7ecb7c56b 100644
--- a/net/mac802154/tx.c
+++ b/net/mac802154/tx.c
@@ -77,9 +77,6 @@ ieee802154_tx(struct ieee802154_local *local, struct sk_buff *skb)
put_unaligned_le16(crc, skb_put(skb, 2));
}
- if (skb_cow_head(skb, local->hw.extra_tx_headroom))
- goto err_tx;
-
/* Stop the netif queue on each sub_if_data object. */
ieee802154_stop_queue(&local->hw);