summaryrefslogtreecommitdiffstats
path: root/tools/lguest
diff options
context:
space:
mode:
authorRusty Russell <rusty@rustcorp.com.au>2015-02-13 17:13:43 +1030
committerRusty Russell <rusty@rustcorp.com.au>2015-02-13 17:15:52 +1030
commitd39a6785f40af658224bc3ff3d4c4a5a2f7c9eda (patch)
tree8882a1116659a2efcd512f226cafe77eab9b7fe4 /tools/lguest
parent55c2d7884e9a97c2f2d46d5818f783bf3dcc5314 (diff)
downloadlinux-stable-d39a6785f40af658224bc3ff3d4c4a5a2f7c9eda.tar.gz
linux-stable-d39a6785f40af658224bc3ff3d4c4a5a2f7c9eda.tar.bz2
linux-stable-d39a6785f40af658224bc3ff3d4c4a5a2f7c9eda.zip
tools/lguest: more documentation and checking of virtio 1.0 compliance.
This is from all the non-PCI parts of the spec. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Diffstat (limited to 'tools/lguest')
-rw-r--r--tools/lguest/lguest.c307
1 files changed, 293 insertions, 14 deletions
diff --git a/tools/lguest/lguest.c b/tools/lguest/lguest.c
index 4c7c2aa66c89..bc444aff2333 100644
--- a/tools/lguest/lguest.c
+++ b/tools/lguest/lguest.c
@@ -170,6 +170,9 @@ struct device {
/* Is it operational */
bool running;
+ /* Has it written FEATURES_OK but not re-checked it? */
+ bool wrote_features_ok;
+
/* PCI configuration */
union {
struct pci_config config;
@@ -668,7 +671,26 @@ static void trigger_irq(struct virtqueue *vq)
return;
vq->pending_used = 0;
- /* If they don't want an interrupt, don't send one... */
+ /*
+ * 2.4.7.1:
+ *
+ * If the VIRTIO_F_EVENT_IDX feature bit is not negotiated:
+ * The driver MUST set flags to 0 or 1.
+ */
+ if (vq->vring.avail->flags > 1)
+ errx(1, "%s: avail->flags = %u\n",
+ vq->dev->name, vq->vring.avail->flags);
+
+ /*
+ * 2.4.7.2:
+ *
+ * If the VIRTIO_F_EVENT_IDX feature bit is not negotiated:
+ *
+ * - The device MUST ignore the used_event value.
+ * - After the device writes a descriptor index into the used ring:
+ * - If flags is 1, the device SHOULD NOT send an interrupt.
+ * - If flags is 0, the device MUST send an interrupt.
+ */
if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) {
return;
}
@@ -703,6 +725,14 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
struct vring_desc *desc;
u16 last_avail = lg_last_avail(vq);
+ /*
+ * 2.4.7.1:
+ *
+ * The driver MUST handle spurious interrupts from the device.
+ *
+ * That's why this is a while loop.
+ */
+
/* There's nothing available? */
while (last_avail == vq->vring.avail->idx) {
u64 event;
@@ -776,12 +806,62 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
* descriptor chain.
*/
if (desc[i].flags & VRING_DESC_F_INDIRECT) {
+ /* 2.4.5.3.1:
+ *
+ * The driver MUST NOT set the VIRTQ_DESC_F_INDIRECT
+ * flag unless the VIRTIO_F_INDIRECT_DESC feature was
+ * negotiated.
+ */
+ if (!(vq->dev->features_accepted &
+ (1<<VIRTIO_RING_F_INDIRECT_DESC)))
+ errx(1, "%s: vq indirect not negotiated",
+ vq->dev->name);
+
+ /*
+ * 2.4.5.3.1:
+ *
+ * The driver MUST NOT set the VIRTQ_DESC_F_INDIRECT
+ * flag within an indirect descriptor (ie. only one
+ * table per descriptor).
+ */
+ if (desc != vq->vring.desc)
+ errx(1, "%s: Indirect within indirect",
+ vq->dev->name);
+
+ /*
+ * Proposed update VIRTIO-134 spells this out:
+ *
+ * A driver MUST NOT set both VIRTQ_DESC_F_INDIRECT
+ * and VIRTQ_DESC_F_NEXT in flags.
+ */
+ if (desc[i].flags & VRING_DESC_F_NEXT)
+ errx(1, "%s: indirect and next together",
+ vq->dev->name);
+
if (desc[i].len % sizeof(struct vring_desc))
errx(1, "Invalid size for indirect buffer table");
+ /*
+ * 2.4.5.3.2:
+ *
+ * The device MUST ignore the write-only flag
+ * (flags&VIRTQ_DESC_F_WRITE) in the descriptor that
+ * refers to an indirect table.
+ *
+ * We ignore it here: :)
+ */
max = desc[i].len / sizeof(struct vring_desc);
desc = check_pointer(desc[i].addr, desc[i].len);
i = 0;
+
+ /* 2.4.5.3.1:
+ *
+ * A driver MUST NOT create a descriptor chain longer
+ * than the Queue Size of the device.
+ */
+ if (max > vq->pci_config.queue_size)
+ errx(1, "%s: indirect has too many entries",
+ vq->dev->name);
}
/* Grab the first descriptor, and check it's OK. */
@@ -1082,6 +1162,7 @@ static void reset_device(struct device *dev)
}
}
dev->running = false;
+ dev->wrote_features_ok = false;
/* Now we care if threads die. */
signal(SIGCHLD, (void *)kill_launcher);
@@ -1703,6 +1784,18 @@ static void check_virtqueue(struct device *d, struct virtqueue *vq)
|| vq->pci_config.queue_used_hi)
errx(1, "%s: invalid 64-bit queue address", d->name);
+ /*
+ * 2.4.1:
+ *
+ * The driver MUST ensure that the physical address of the first byte
+ * of each virtqueue part is a multiple of the specified alignment
+ * value in the above table.
+ */
+ if (vq->pci_config.queue_desc_lo % 16
+ || vq->pci_config.queue_avail_lo % 2
+ || vq->pci_config.queue_used_lo % 4)
+ errx(1, "%s: invalid alignment in queue addresses", d->name);
+
/* Initialize the virtqueue and check they're all in range. */
vq->vring.num = vq->pci_config.queue_size;
vq->vring.desc = check_pointer(vq->pci_config.queue_desc_lo,
@@ -1715,6 +1808,16 @@ static void check_virtqueue(struct device *d, struct virtqueue *vq)
sizeof(*vq->vring.used)
+ (sizeof(vq->vring.used->ring[0])
* vq->vring.num));
+
+ /*
+ * 2.4.9.1:
+ *
+ * The driver MUST initialize flags in the used ring to 0
+ * when allocating the used ring.
+ */
+ if (vq->vring.used->flags != 0)
+ errx(1, "%s: invalid initial used.flags %#x",
+ d->name, vq->vring.used->flags);
}
static void start_virtqueue(struct virtqueue *vq)
@@ -1768,12 +1871,12 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
d->mmio->cfg.device_feature = (d->features >> 32);
else
d->mmio->cfg.device_feature = 0;
- goto write_through32;
+ goto feature_write_through32;
case offsetof(struct virtio_pci_mmio, cfg.guest_feature_select):
if (val > 1)
errx(1, "%s: Unexpected driver select %u",
d->name, val);
- goto write_through32;
+ goto feature_write_through32;
case offsetof(struct virtio_pci_mmio, cfg.guest_feature):
if (d->mmio->cfg.guest_feature_select == 0) {
d->features_accepted &= ~((u64)0xFFFFFFFF);
@@ -1783,11 +1886,19 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
d->features_accepted &= 0xFFFFFFFF;
d->features_accepted |= ((u64)val) << 32;
}
+ /*
+ * 2.2.1:
+ *
+ * The driver MUST NOT accept a feature which the device did
+ * not offer
+ */
if (d->features_accepted & ~d->features)
errx(1, "%s: over-accepted features %#llx of %#llx",
d->name, d->features_accepted, d->features);
- goto write_through32;
- case offsetof(struct virtio_pci_mmio, cfg.device_status):
+ goto feature_write_through32;
+ case offsetof(struct virtio_pci_mmio, cfg.device_status): {
+ u8 prev;
+
verbose("%s: device status -> %#x\n", d->name, val);
/*
* 4.1.4.3.1:
@@ -1795,8 +1906,15 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
* The device MUST reset when 0 is written to device_status,
* and present a 0 in device_status once that is done.
*/
- if (val == 0)
+ if (val == 0) {
reset_device(d);
+ goto write_through8;
+ }
+
+ /* 2.1.1: The driver MUST NOT clear a device status bit. */
+ if (d->mmio->cfg.device_status & ~val)
+ errx(1, "%s: unset of device status bit %#x -> %#x",
+ d->name, d->mmio->cfg.device_status, val);
/*
* 2.1.2:
@@ -1808,7 +1926,67 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
&& !(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK))
start_virtqueues(d);
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ * - Reset the device.
+ * - Set the ACKNOWLEDGE status bit: the guest OS has
+ * notice the device.
+ * - Set the DRIVER status bit: the guest OS knows how
+ * to drive the device.
+ * - Read device feature bits, and write the subset
+ * of feature bits understood by the OS and driver
+ * to the device. During this step the driver MAY
+ * read (but MUST NOT write) the device-specific
+ * configuration fields to check that it can
+ * support the device before accepting it.
+ * - Set the FEATURES_OK status bit. The driver
+ * MUST not accept new feature bits after this
+ * step.
+ * - Re-read device status to ensure the FEATURES_OK
+ * bit is still set: otherwise, the device does
+ * not support our subset of features and the
+ * device is unusable.
+ * - Perform device-specific setup, including
+ * discovery of virtqueues for the device,
+ * optional per-bus setup, reading and possibly
+ * writing the device’s virtio configuration
+ * space, and population of virtqueues.
+ * - Set the DRIVER_OK status bit. At this point the
+ * device is “live”.
+ */
+ prev = 0;
+ switch (val & ~d->mmio->cfg.device_status) {
+ case VIRTIO_CONFIG_S_DRIVER_OK:
+ prev |= VIRTIO_CONFIG_S_FEATURES_OK; /* fall thru */
+ case VIRTIO_CONFIG_S_FEATURES_OK:
+ prev |= VIRTIO_CONFIG_S_DRIVER; /* fall thru */
+ case VIRTIO_CONFIG_S_DRIVER:
+ prev |= VIRTIO_CONFIG_S_ACKNOWLEDGE; /* fall thru */
+ case VIRTIO_CONFIG_S_ACKNOWLEDGE:
+ break;
+ default:
+ errx(1, "%s: unknown device status bit %#x -> %#x",
+ d->name, d->mmio->cfg.device_status, val);
+ }
+ if (d->mmio->cfg.device_status != prev)
+ errx(1, "%s: unexpected status transition %#x -> %#x",
+ d->name, d->mmio->cfg.device_status, val);
+
+ /* If they just wrote FEATURES_OK, we make sure they read */
+ switch (val & ~d->mmio->cfg.device_status) {
+ case VIRTIO_CONFIG_S_FEATURES_OK:
+ d->wrote_features_ok = true;
+ break;
+ case VIRTIO_CONFIG_S_DRIVER_OK:
+ if (d->wrote_features_ok)
+ errx(1, "%s: did not re-read FEATURES_OK",
+ d->name);
+ break;
+ }
goto write_through8;
+ }
case offsetof(struct virtio_pci_mmio, cfg.queue_select):
vq = vq_by_num(d, val);
/*
@@ -1844,7 +2022,9 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
case offsetof(struct virtio_pci_mmio, cfg.queue_msix_vector):
errx(1, "%s: attempt to set MSIX vector to %u",
d->name, val);
- case offsetof(struct virtio_pci_mmio, cfg.queue_enable):
+ case offsetof(struct virtio_pci_mmio, cfg.queue_enable): {
+ struct virtqueue *vq = vq_by_num(d, d->mmio->cfg.queue_select);
+
/*
* 4.1.4.3.2:
*
@@ -1852,17 +2032,27 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
*/
if (val != 1)
errx(1, "%s: setting queue_enable to %u", d->name, val);
- d->mmio->cfg.queue_enable = val;
- save_vq_config(&d->mmio->cfg,
- vq_by_num(d, d->mmio->cfg.queue_select));
+
/*
- * 4.1.4.3.2:
+ * 3.1.1:
*
- * The driver MUST configure the other virtqueue fields before
- * enabling the virtqueue with queue_enable.
+ * 7. Perform device-specific setup, including discovery of
+ * virtqueues for the device, optional per-bus setup,
+ * reading and possibly writing the device’s virtio
+ * configuration space, and population of virtqueues.
+ * 8. Set the DRIVER_OK status bit.
+ *
+ * All our devices require all virtqueues to be enabled, so
+ * they should have done that before setting DRIVER_OK.
*/
- check_virtqueue(d, vq_by_num(d, d->mmio->cfg.queue_select));
+ if (d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK)
+ errx(1, "%s: enabling vs after DRIVER_OK", d->name);
+
+ d->mmio->cfg.queue_enable = val;
+ save_vq_config(&d->mmio->cfg, vq);
+ check_virtqueue(d, vq);
goto write_through16;
+ }
case offsetof(struct virtio_pci_mmio, cfg.queue_notify_off):
errx(1, "%s: attempt to write to queue_notify_off", d->name);
case offsetof(struct virtio_pci_mmio, cfg.queue_desc_lo):
@@ -1880,6 +2070,26 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
if (d->mmio->cfg.queue_enable)
errx(1, "%s: changing queue on live device",
d->name);
+
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * 5. Set the FEATURES_OK status bit. The driver MUST not
+ * accept new feature bits after this step.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_FEATURES_OK))
+ errx(1, "%s: enabling vs before FEATURES_OK", d->name);
+
+ /*
+ * 6. Re-read device status to ensure the FEATURES_OK bit is
+ * still set...
+ */
+ if (d->wrote_features_ok)
+ errx(1, "%s: didn't re-read FEATURES_OK before setup",
+ d->name);
+
goto write_through32;
case offsetof(struct virtio_pci_mmio, notify):
vq = vq_by_num(d, val);
@@ -1909,6 +2119,27 @@ static void emulate_mmio_write(struct device *d, u32 off, u32 val, u32 mask)
errx(1, "%s: Unexpected write to offset %u", d->name, off);
}
+feature_write_through32:
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * - Set the DRIVER status bit: the guest OS knows how
+ * to drive the device.
+ * - Read device feature bits, and write the subset
+ * of feature bits understood by the OS and driver
+ * to the device.
+ *...
+ * - Set the FEATURES_OK status bit. The driver MUST not
+ * accept new feature bits after this step.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+ errx(1, "%s: feature write before VIRTIO_CONFIG_S_DRIVER",
+ d->name);
+ if (d->mmio->cfg.device_status & VIRTIO_CONFIG_S_FEATURES_OK)
+ errx(1, "%s: feature write after VIRTIO_CONFIG_S_FEATURES_OK",
+ d->name);
/*
* 4.1.3.1:
@@ -1951,12 +2182,29 @@ static u32 emulate_mmio_read(struct device *d, u32 off, u32 mask)
case offsetof(struct virtio_pci_mmio, cfg.device_feature):
case offsetof(struct virtio_pci_mmio, cfg.guest_feature_select):
case offsetof(struct virtio_pci_mmio, cfg.guest_feature):
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * - Set the DRIVER status bit: the guest OS knows how
+ * to drive the device.
+ * - Read device feature bits, and write the subset
+ * of feature bits understood by the OS and driver
+ * to the device.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+ errx(1, "%s: feature read before VIRTIO_CONFIG_S_DRIVER",
+ d->name);
goto read_through32;
case offsetof(struct virtio_pci_mmio, cfg.msix_config):
errx(1, "%s: read of msix_config", d->name);
case offsetof(struct virtio_pci_mmio, cfg.num_queues):
goto read_through16;
case offsetof(struct virtio_pci_mmio, cfg.device_status):
+ /* As they did read, any write of FEATURES_OK is now fine. */
+ d->wrote_features_ok = false;
+ goto read_through8;
case offsetof(struct virtio_pci_mmio, cfg.config_generation):
/*
* 4.1.4.3.1:
@@ -1971,6 +2219,15 @@ static u32 emulate_mmio_read(struct device *d, u32 off, u32 mask)
*/
goto read_through8;
case offsetof(struct virtio_pci_mmio, notify):
+ /*
+ * 3.1.1:
+ *
+ * The driver MUST NOT notify the device before setting
+ * DRIVER_OK.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER_OK))
+ errx(1, "%s: notify before VIRTIO_CONFIG_S_DRIVER_OK",
+ d->name);
goto read_through16;
case offsetof(struct virtio_pci_mmio, isr):
if (mask != 0xFF)
@@ -1992,6 +2249,23 @@ static u32 emulate_mmio_read(struct device *d, u32 off, u32 mask)
if (off > d->mmio_size - 4)
errx(1, "%s: read past end (%#x)",
d->name, getreg(eip));
+
+ /*
+ * 3.1.1:
+ * The driver MUST follow this sequence to initialize a device:
+ *...
+ * 3. Set the DRIVER status bit: the guest OS knows how to
+ * drive the device.
+ * 4. Read device feature bits, and write the subset of
+ * feature bits understood by the OS and driver to the
+ * device. During this step the driver MAY read (but MUST NOT
+ * write) the device-specific configuration fields to check
+ * that it can support the device before accepting it.
+ */
+ if (!(d->mmio->cfg.device_status & VIRTIO_CONFIG_S_DRIVER))
+ errx(1, "%s: config read before VIRTIO_CONFIG_S_DRIVER",
+ d->name);
+
if (mask == 0xFFFFFFFF)
goto read_through32;
else if (mask == 0xFFFF)
@@ -2200,6 +2474,10 @@ static void init_pci_config(struct pci_config *pci, u16 type,
*
* The device MUST either present notify_off_multiplier as an even
* power of 2, or present notify_off_multiplier as 0.
+ *
+ * 2.1.2:
+ *
+ * The device MUST initialize device status to 0 upon reset.
*/
memset(pci, 0, sizeof(*pci));
@@ -2340,6 +2618,7 @@ static struct device *new_pci_device(const char *name, u16 type,
dev->name = name;
dev->vq = NULL;
dev->running = false;
+ dev->wrote_features_ok = false;
dev->mmio_size = sizeof(struct virtio_pci_mmio);
dev->mmio = calloc(1, dev->mmio_size);
dev->features = (u64)1 << VIRTIO_F_VERSION_1;