diff options
-rw-r--r-- | drivers/remoteproc/Kconfig | 15 | ||||
-rw-r--r-- | drivers/remoteproc/Makefile | 1 | ||||
-rw-r--r-- | drivers/remoteproc/qcom_q6v5_adsp.c | 501 |
3 files changed, 517 insertions, 0 deletions
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 8894935583e2..f0abd2608044 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -92,6 +92,21 @@ config QCOM_Q6V5_COMMON depends on ARCH_QCOM depends on QCOM_SMEM +config QCOM_Q6V5_ADSP + tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader" + depends on OF && ARCH_QCOM + depends on QCOM_SMEM + depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n) + depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n + depends on QCOM_SYSMON || QCOM_SYSMON=n + select MFD_SYSCON + select QCOM_MDT_LOADER + select QCOM_Q6V5_COMMON + select QCOM_RPROC_COMMON + help + Say y here to support the Peripheral Image Loader + for the Qualcomm Technology Inc. ADSP remote processors. + config QCOM_Q6V5_MSS tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support" depends on OF && ARCH_QCOM diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 050f41ac93b0..ce5d061e92be 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o +obj-$(CONFIG_QCOM_Q6V5_ADSP) += qcom_q6v5_adsp.o obj-$(CONFIG_QCOM_Q6V5_MSS) += qcom_q6v5_mss.o obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c new file mode 100644 index 000000000000..3285a8b333c4 --- /dev/null +++ b/drivers/remoteproc/qcom_q6v5_adsp.c @@ -0,0 +1,501 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Qualcomm Technology Inc. ADSP Peripheral Image Loader for SDM845. + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/remoteproc.h> +#include <linux/reset.h> +#include <linux/soc/qcom/mdt_loader.h> +#include <linux/soc/qcom/smem.h> +#include <linux/soc/qcom/smem_state.h> + +#include "qcom_common.h" +#include "qcom_q6v5.h" +#include "remoteproc_internal.h" + +/* time out value */ +#define ACK_TIMEOUT 1000 +#define BOOT_FSM_TIMEOUT 10000 +/* mask values */ +#define EVB_MASK GENMASK(27, 4) +/*QDSP6SS register offsets*/ +#define RST_EVB_REG 0x10 +#define CORE_START_REG 0x400 +#define BOOT_CMD_REG 0x404 +#define BOOT_STATUS_REG 0x408 +#define RET_CFG_REG 0x1C +/*TCSR register offsets*/ +#define LPASS_MASTER_IDLE_REG 0x8 +#define LPASS_HALTACK_REG 0x4 +#define LPASS_PWR_ON_REG 0x10 +#define LPASS_HALTREQ_REG 0x0 + +/* list of clocks required by ADSP PIL */ +static const char * const adsp_clk_id[] = { + "sway_cbcr", "lpass_aon", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", + "qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core", +}; + +struct adsp_pil_data { + int crash_reason_smem; + const char *firmware_name; + + const char *ssr_name; + const char *sysmon_name; + int ssctl_id; +}; + +struct qcom_adsp { + struct device *dev; + struct rproc *rproc; + + struct qcom_q6v5 q6v5; + + struct clk *xo; + + int num_clks; + struct clk_bulk_data *clks; + + void __iomem *qdsp6ss_base; + + struct reset_control *pdc_sync_reset; + struct reset_control *cc_lpass_restart; + + struct regmap *halt_map; + unsigned int halt_lpass; + + int crash_reason_smem; + + struct completion start_done; + struct completion stop_done; + + phys_addr_t mem_phys; + phys_addr_t mem_reloc; + void *mem_region; + size_t mem_size; + + struct qcom_rproc_glink glink_subdev; + struct qcom_rproc_ssr ssr_subdev; + struct qcom_sysmon *sysmon; +}; + +static int qcom_adsp_shutdown(struct qcom_adsp *adsp) +{ + unsigned long timeout; + unsigned int val; + int ret; + + /* Reset the retention logic */ + val = readl(adsp->qdsp6ss_base + RET_CFG_REG); + val |= 0x1; + writel(val, adsp->qdsp6ss_base + RET_CFG_REG); + + clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks); + + /* QDSP6 master port needs to be explicitly halted */ + ret = regmap_read(adsp->halt_map, + adsp->halt_lpass + LPASS_PWR_ON_REG, &val); + if (ret || !val) + goto reset; + + ret = regmap_read(adsp->halt_map, + adsp->halt_lpass + LPASS_MASTER_IDLE_REG, + &val); + if (ret || val) + goto reset; + + regmap_write(adsp->halt_map, + adsp->halt_lpass + LPASS_HALTREQ_REG, 1); + + /* Wait for halt ACK from QDSP6 */ + timeout = jiffies + msecs_to_jiffies(ACK_TIMEOUT); + for (;;) { + ret = regmap_read(adsp->halt_map, + adsp->halt_lpass + LPASS_HALTACK_REG, &val); + if (ret || val || time_after(jiffies, timeout)) + break; + + usleep_range(1000, 1100); + } + + ret = regmap_read(adsp->halt_map, + adsp->halt_lpass + LPASS_MASTER_IDLE_REG, &val); + if (ret || !val) + dev_err(adsp->dev, "port failed halt\n"); + +reset: + /* Assert the LPASS PDC Reset */ + reset_control_assert(adsp->pdc_sync_reset); + /* Place the LPASS processor into reset */ + reset_control_assert(adsp->cc_lpass_restart); + /* wait after asserting subsystem restart from AOSS */ + usleep_range(200, 300); + + /* Clear the halt request for the AXIM and AHBM for Q6 */ + regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 0); + + /* De-assert the LPASS PDC Reset */ + reset_control_deassert(adsp->pdc_sync_reset); + /* Remove the LPASS reset */ + reset_control_deassert(adsp->cc_lpass_restart); + /* wait after de-asserting subsystem restart from AOSS */ + usleep_range(200, 300); + + return 0; +} + +static int adsp_load(struct rproc *rproc, const struct firmware *fw) +{ + struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; + + return qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0, + adsp->mem_region, adsp->mem_phys, adsp->mem_size, + &adsp->mem_reloc); +} + +static int adsp_start(struct rproc *rproc) +{ + struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; + int ret; + unsigned int val; + + qcom_q6v5_prepare(&adsp->q6v5); + + ret = clk_prepare_enable(adsp->xo); + if (ret) + goto disable_irqs; + + dev_pm_genpd_set_performance_state(adsp->dev, INT_MAX); + ret = pm_runtime_get_sync(adsp->dev); + if (ret) + goto disable_xo_clk; + + ret = clk_bulk_prepare_enable(adsp->num_clks, adsp->clks); + if (ret) { + dev_err(adsp->dev, "adsp clk_enable failed\n"); + goto disable_power_domain; + } + + /* Program boot address */ + writel(adsp->mem_phys >> 4, adsp->qdsp6ss_base + RST_EVB_REG); + + /* De-assert QDSP6 stop core. QDSP6 will execute after out of reset */ + writel(0x1, adsp->qdsp6ss_base + CORE_START_REG); + + /* Trigger boot FSM to start QDSP6 */ + writel(0x1, adsp->qdsp6ss_base + BOOT_CMD_REG); + + /* Wait for core to come out of reset */ + ret = readl_poll_timeout(adsp->qdsp6ss_base + BOOT_STATUS_REG, + val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT); + if (ret) { + dev_err(adsp->dev, "failed to bootup adsp\n"); + goto disable_adsp_clks; + } + + ret = qcom_q6v5_wait_for_start(&adsp->q6v5, msecs_to_jiffies(5 * HZ)); + if (ret == -ETIMEDOUT) { + dev_err(adsp->dev, "start timed out\n"); + goto disable_adsp_clks; + } + + return 0; + +disable_adsp_clks: + clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks); +disable_power_domain: + dev_pm_genpd_set_performance_state(adsp->dev, 0); + pm_runtime_put(adsp->dev); +disable_xo_clk: + clk_disable_unprepare(adsp->xo); +disable_irqs: + qcom_q6v5_unprepare(&adsp->q6v5); + + return ret; +} + +static void qcom_adsp_pil_handover(struct qcom_q6v5 *q6v5) +{ + struct qcom_adsp *adsp = container_of(q6v5, struct qcom_adsp, q6v5); + + clk_disable_unprepare(adsp->xo); + dev_pm_genpd_set_performance_state(adsp->dev, 0); + pm_runtime_put(adsp->dev); +} + +static int adsp_stop(struct rproc *rproc) +{ + struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; + int handover; + int ret; + + ret = qcom_q6v5_request_stop(&adsp->q6v5); + if (ret == -ETIMEDOUT) + dev_err(adsp->dev, "timed out on wait\n"); + + ret = qcom_adsp_shutdown(adsp); + if (ret) + dev_err(adsp->dev, "failed to shutdown: %d\n", ret); + + handover = qcom_q6v5_unprepare(&adsp->q6v5); + if (handover) + qcom_adsp_pil_handover(&adsp->q6v5); + + return ret; +} + +static void *adsp_da_to_va(struct rproc *rproc, u64 da, int len) +{ + struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv; + int offset; + + offset = da - adsp->mem_reloc; + if (offset < 0 || offset + len > adsp->mem_size) + return NULL; + + return adsp->mem_region + offset; +} + +static const struct rproc_ops adsp_ops = { + .start = adsp_start, + .stop = adsp_stop, + .da_to_va = adsp_da_to_va, + .parse_fw = qcom_register_dump_segments, + .load = adsp_load, +}; + +static int adsp_init_clock(struct qcom_adsp *adsp) +{ + int i, ret; + + adsp->xo = devm_clk_get(adsp->dev, "xo"); + if (IS_ERR(adsp->xo)) { + ret = PTR_ERR(adsp->xo); + if (ret != -EPROBE_DEFER) + dev_err(adsp->dev, "failed to get xo clock"); + return ret; + } + + adsp->num_clks = ARRAY_SIZE(adsp_clk_id); + adsp->clks = devm_kcalloc(adsp->dev, adsp->num_clks, + sizeof(*adsp->clks), GFP_KERNEL); + if (IS_ERR(adsp->clks)) { + ret = PTR_ERR(adsp->clks); + if (ret != -EPROBE_DEFER) + dev_err(adsp->dev, "failed to get adsp clock"); + return ret; + } + + for (i = 0; i < adsp->num_clks; i++) + adsp->clks[i].id = adsp_clk_id[i]; + + return devm_clk_bulk_get(adsp->dev, adsp->num_clks, adsp->clks); +} + +static int adsp_init_reset(struct qcom_adsp *adsp) +{ + adsp->pdc_sync_reset = devm_reset_control_get_exclusive(adsp->dev, + "pdc_sync"); + if (IS_ERR(adsp->pdc_sync_reset)) { + dev_err(adsp->dev, "failed to acquire pdc_sync reset\n"); + return PTR_ERR(adsp->pdc_sync_reset); + } + + adsp->cc_lpass_restart = devm_reset_control_get_exclusive(adsp->dev, + "cc_lpass"); + if (IS_ERR(adsp->cc_lpass_restart)) { + dev_err(adsp->dev, "failed to acquire cc_lpass restart\n"); + return PTR_ERR(adsp->cc_lpass_restart); + } + + return 0; +} + +static int adsp_init_mmio(struct qcom_adsp *adsp, + struct platform_device *pdev) +{ + struct device_node *syscon; + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + adsp->qdsp6ss_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (IS_ERR(adsp->qdsp6ss_base)) { + dev_err(adsp->dev, "failed to map QDSP6SS registers\n"); + return PTR_ERR(adsp->qdsp6ss_base); + } + + syscon = of_parse_phandle(pdev->dev.of_node, "qcom,halt-regs", 0); + if (!syscon) { + dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n"); + return -EINVAL; + } + + adsp->halt_map = syscon_node_to_regmap(syscon); + of_node_put(syscon); + if (IS_ERR(adsp->halt_map)) + return PTR_ERR(adsp->halt_map); + + ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,halt-regs", + 1, &adsp->halt_lpass); + if (ret < 0) { + dev_err(&pdev->dev, "no offset in syscon\n"); + return ret; + } + + return 0; +} + +static int adsp_alloc_memory_region(struct qcom_adsp *adsp) +{ + struct device_node *node; + struct resource r; + int ret; + + node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0); + if (!node) { + dev_err(adsp->dev, "no memory-region specified\n"); + return -EINVAL; + } + + ret = of_address_to_resource(node, 0, &r); + if (ret) + return ret; + + adsp->mem_phys = adsp->mem_reloc = r.start; + adsp->mem_size = resource_size(&r); + adsp->mem_region = devm_ioremap_wc(adsp->dev, + adsp->mem_phys, adsp->mem_size); + if (!adsp->mem_region) { + dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n", + &r.start, adsp->mem_size); + return -EBUSY; + } + + return 0; +} + +static int adsp_probe(struct platform_device *pdev) +{ + const struct adsp_pil_data *desc; + struct qcom_adsp *adsp; + struct rproc *rproc; + int ret; + + desc = of_device_get_match_data(&pdev->dev); + if (!desc) + return -EINVAL; + + rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops, + desc->firmware_name, sizeof(*adsp)); + if (!rproc) { + dev_err(&pdev->dev, "unable to allocate remoteproc\n"); + return -ENOMEM; + } + + adsp = (struct qcom_adsp *)rproc->priv; + adsp->dev = &pdev->dev; + adsp->rproc = rproc; + platform_set_drvdata(pdev, adsp); + + ret = adsp_alloc_memory_region(adsp); + if (ret) + goto free_rproc; + + ret = adsp_init_clock(adsp); + if (ret) + goto free_rproc; + + pm_runtime_enable(adsp->dev); + + ret = adsp_init_reset(adsp); + if (ret) + goto disable_pm; + + ret = adsp_init_mmio(adsp, pdev); + if (ret) + goto disable_pm; + + ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, + qcom_adsp_pil_handover); + if (ret) + goto disable_pm; + + qcom_add_glink_subdev(rproc, &adsp->glink_subdev); + qcom_add_ssr_subdev(rproc, &adsp->ssr_subdev, desc->ssr_name); + adsp->sysmon = qcom_add_sysmon_subdev(rproc, + desc->sysmon_name, + desc->ssctl_id); + + ret = rproc_add(rproc); + if (ret) + goto disable_pm; + + return 0; + +disable_pm: + pm_runtime_disable(adsp->dev); +free_rproc: + rproc_free(rproc); + + return ret; +} + +static int adsp_remove(struct platform_device *pdev) +{ + struct qcom_adsp *adsp = platform_get_drvdata(pdev); + + rproc_del(adsp->rproc); + + qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev); + qcom_remove_sysmon_subdev(adsp->sysmon); + qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev); + pm_runtime_disable(adsp->dev); + rproc_free(adsp->rproc); + + return 0; +} + +static const struct adsp_pil_data adsp_resource_init = { + .crash_reason_smem = 423, + .firmware_name = "adsp.mdt", + .ssr_name = "lpass", + .sysmon_name = "adsp", + .ssctl_id = 0x14, +}; + +static const struct of_device_id adsp_of_match[] = { + { .compatible = "qcom,sdm845-adsp-pil", .data = &adsp_resource_init }, + { }, +}; +MODULE_DEVICE_TABLE(of, adsp_of_match); + +static struct platform_driver adsp_pil_driver = { + .probe = adsp_probe, + .remove = adsp_remove, + .driver = { + .name = "qcom_q6v5_adsp", + .of_match_table = adsp_of_match, + }, +}; + +module_platform_driver(adsp_pil_driver); +MODULE_DESCRIPTION("QTI SDM845 ADSP Peripheral Image Loader"); +MODULE_LICENSE("GPL v2"); |