diff options
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/stamp.c | 454 |
1 files changed, 442 insertions, 12 deletions
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9e775e6ad48e..328f002f76a0 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -701,6 +701,65 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { }; #endif +#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) +static struct bfin5xx_spi_chip ad7314_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) +static unsigned short ad7816_platform_data[] = { + GPIO_PF4, /* rdwr_pin */ + GPIO_PF5, /* convert_pin */ + GPIO_PF7, /* busy_pin */ + 0, +}; + +static struct bfin5xx_spi_chip ad7816_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) +static unsigned long adt7310_platform_data[3] = { +/* INT bound temperature alarm event. line 1 */ + IRQ_PG4, IRQF_TRIGGER_LOW, +/* CT bound temperature alarm event irq_flags. line 0 */ + IRQF_TRIGGER_LOW, +}; + +static struct bfin5xx_spi_chip adt7310_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) +static unsigned short ad7298_platform_data[] = { + GPIO_PF7, /* busy_pin */ + 0, +}; + +static struct bfin5xx_spi_chip ad7298_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) +static unsigned long adt7316_spi_data[2] = { + IRQF_TRIGGER_LOW, /* interrupt flags */ + GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ +}; + +static struct bfin5xx_spi_chip adt7316_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 @@ -944,6 +1003,13 @@ static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { }; #endif +#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE) +static struct bfin5xx_spi_chip spi_ad7476_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -1062,6 +1128,67 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) + { + .modalias = "ad7314", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .controller_data = &ad7314_spi_chip_info, + .mode = SPI_MODE_1, + }, +#endif + +#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) + { + .modalias = "ad7818", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad7816_platform_data, + .controller_data = &ad7816_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) + { + .modalias = "adt7310", + .max_speed_hz = 1000000, + .irq = IRQ_PG5, /* CT alarm event. Line 0 */ + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = adt7310_platform_data, + .controller_data = &adt7310_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) + { + .modalias = "ad7298", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad7298_platform_data, + .controller_data = &ad7298_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) + { + .modalias = "adt7316", + .max_speed_hz = 1000000, + .irq = IRQ_PG5, /* interrupt line */ + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = adt7316_spi_data, + .controller_data = &adt7316_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", @@ -1161,6 +1288,233 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif +#if defined(CONFIG_AD7476) \ + || defined(CONFIG_AD7476_MODULE) + { + .modalias = "ad7476", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_ad7476_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_ADE7753) \ + || defined(CONFIG_ADE7753_MODULE) + { + .modalias = "ade7753", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if defined(CONFIG_ADE7754) \ + || defined(CONFIG_ADE7754_MODULE) + { + .modalias = "ade7754", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if defined(CONFIG_ADE7758) \ + || defined(CONFIG_ADE7758_MODULE) + { + .modalias = "ade7758", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if defined(CONFIG_ADE7759) \ + || defined(CONFIG_ADE7759_MODULE) + { + .modalias = "ade7759", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if defined(CONFIG_ADE7854_SPI) \ + || defined(CONFIG_ADE7854_SPI_MODULE) + { + .modalias = "ade7854", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_ADIS16060) \ + || defined(CONFIG_ADIS16060_MODULE) + { + .modalias = "adis16060_r", + .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_0, + }, + { + .modalias = "adis16060_w", + .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, /* CS for write, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if defined(CONFIG_ADIS16130) \ + || defined(CONFIG_ADIS16130_MODULE) + { + .modalias = "adis16130", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS for read, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_ADIS16201) \ + || defined(CONFIG_ADIS16201_MODULE) + { + .modalias = "adis16201", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16203) \ + || defined(CONFIG_ADIS16203_MODULE) + { + .modalias = "adis16203", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16204) \ + || defined(CONFIG_ADIS16204_MODULE) + { + .modalias = "adis16204", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16209) \ + || defined(CONFIG_ADIS16209_MODULE) + { + .modalias = "adis16209", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16220) \ + || defined(CONFIG_ADIS16220_MODULE) + { + .modalias = "adis16220", + .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16240) \ + || defined(CONFIG_ADIS16240_MODULE) + { + .modalias = "adis16240", + .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16260) \ + || defined(CONFIG_ADIS16260_MODULE) + { + .modalias = "adis16260", + .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16261) \ + || defined(CONFIG_ADIS16261_MODULE) + { + .modalias = "adis16261", + .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_ADIS16300) \ + || defined(CONFIG_ADIS16300_MODULE) + { + .modalias = "adis16300", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16350) \ + || defined(CONFIG_ADIS16350_MODULE) + { + .modalias = "adis16364", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if defined(CONFIG_ADIS16400) \ + || defined(CONFIG_ADIS16400_MODULE) + { + .modalias = "adis16400", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif }; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -1829,6 +2183,21 @@ static struct platform_device ad5398_userspace_consumer_device = { #endif #endif +#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +/* INT bound temperature alarm event. line 1 */ +static unsigned long adt7410_platform_data[2] = { + IRQ_PG4, IRQF_TRIGGER_LOW, +}; +#endif + +#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) +/* INT bound temperature alarm event. line 1 */ +static unsigned long adt7316_i2c_data[2] = { + IRQF_TRIGGER_LOW, /* interrupt flags */ + GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ +}; +#endif + static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) { @@ -1873,12 +2242,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { { I2C_BOARD_INFO("ad7414", 0x9), .irq = IRQ_PG5, - /* - * platform_data pointer is borrwoed by the driver to - * store custimer defined IRQ ALART level mode. - * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid. - */ - .platform_data = (void *)IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_LOW, }, #endif @@ -1886,12 +2250,56 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { { I2C_BOARD_INFO("ad7417", 0xb), .irq = IRQ_PG5, - /* - * platform_data pointer is borrwoed by the driver to - * store custimer defined IRQ ALART level mode. - * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid. - */ - .platform_data = (void *)IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_LOW, + .platform_data = (void *)GPIO_PF4, + }, +#endif + +#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE) + { + I2C_BOARD_INFO("ade7854", 0x38), + }, +#endif + +#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE) + { + I2C_BOARD_INFO("adt75", 0x9), + .irq = IRQ_PG5, + .irq_flags = IRQF_TRIGGER_LOW, + }, +#endif + +#if defined(CONFIG_ADT7408) || defined(CONFIG_ADT7408_MODULE) + { + I2C_BOARD_INFO("adt7408", 0x18), + .irq = IRQ_PG5, + .irq_flags = IRQF_TRIGGER_LOW, + }, +#endif + +#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) + { + I2C_BOARD_INFO("adt7410", 0x48), + /* CT critical temperature event. line 0 */ + .irq = IRQ_PG5, + .irq_flags = IRQF_TRIGGER_LOW, + .platform_data = (void *)&adt7410_platform_data, + }, +#endif + +#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE) + { + I2C_BOARD_INFO("ad7291", 0x20), + .irq = IRQ_PG5, + .irq_flags = IRQF_TRIGGER_LOW, + }, +#endif + +#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) + { + I2C_BOARD_INFO("adt7316", 0x48), + .irq = IRQ_PG6, + .platform_data = (void *)&adt7316_i2c_data, }, #endif @@ -2272,6 +2680,23 @@ static struct platform_device adp150_userspace_consumer_device = { #endif #endif +#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ + defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) + +static struct resource iio_gpio_trigger_resources[] = { + [0] = { + .start = IRQ_PF5, + .end = IRQ_PF5, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct platform_device iio_gpio_trigger = { + .name = "iio_gpio_trigger", + .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources), + .resource = iio_gpio_trigger_resources, +}; +#endif static struct platform_device *stamp_devices[] __initdata = { @@ -2412,6 +2837,11 @@ static struct platform_device *stamp_devices[] __initdata = { &adp150_userspace_consumer_device, #endif #endif + +#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ + defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) + &iio_gpio_trigger, +#endif }; static int __init stamp_init(void) |