diff options
| -rw-r--r-- | drivers/hwmon/jc42.c | 182 |
1 files changed, 72 insertions, 110 deletions
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index ba1a3f781fde..baa912a3ba75 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -161,6 +161,21 @@ static struct jc42_chips jc42_chips[] = { { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; +enum temp_index { + t_input = 0, + t_crit, + t_min, + t_max, + t_num_temp +}; + +static const u8 temp_regs[t_num_temp] = { + [t_input] = JC42_REG_TEMP, + [t_crit] = JC42_REG_TEMP_CRITICAL, + [t_min] = JC42_REG_TEMP_LOWER, + [t_max] = JC42_REG_TEMP_UPPER, +}; + /* Each client has this additional data */ struct jc42_data { struct i2c_client *client; @@ -170,10 +185,7 @@ struct jc42_data { unsigned long last_updated; /* In jiffies */ u16 orig_config; /* original configuration */ u16 config; /* current configuration */ - u16 temp_input; /* Temperatures */ - u16 temp_crit; - u16 temp_min; - u16 temp_max; + u16 temp[t_num_temp];/* Temperatures */ }; #define JC42_TEMP_MIN_EXTENDED (-40000) @@ -207,40 +219,19 @@ static struct jc42_data *jc42_update_device(struct device *dev) struct jc42_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; struct jc42_data *ret = data; - int val; + int i, val; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp_input = val; - - val = i2c_smbus_read_word_swapped(client, - JC42_REG_TEMP_CRITICAL); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp_crit = val; - - val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_LOWER); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; + for (i = 0; i < t_num_temp; i++) { + val = i2c_smbus_read_word_swapped(client, temp_regs[i]); + if (val < 0) { + ret = ERR_PTR(val); + goto abort; + } + data->temp[i] = val; } - data->temp_min = val; - - val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_UPPER); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp_max = val; - data->last_updated = jiffies; data->valid = true; } @@ -249,79 +240,55 @@ abort: return ret; } -/* sysfs stuff */ - -/* read routines for temperature limits */ -#define show(value) \ -static ssize_t show_##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct jc42_data *data = jc42_update_device(dev); \ - if (IS_ERR(data)) \ - return PTR_ERR(data); \ - return sprintf(buf, "%d\n", jc42_temp_from_reg(data->value)); \ -} +/* sysfs functions */ -show(temp_input); -show(temp_crit); -show(temp_min); -show(temp_max); - -/* read routines for hysteresis values */ -static ssize_t show_temp_crit_hyst(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct jc42_data *data = jc42_update_device(dev); - int temp, hyst; - if (IS_ERR(data)) return PTR_ERR(data); - - temp = jc42_temp_from_reg(data->temp_crit); - hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) - >> JC42_CFG_HYST_SHIFT]; - return sprintf(buf, "%d\n", temp - hyst); + return sprintf(buf, "%d\n", + jc42_temp_from_reg(data->temp[attr->index])); } -static ssize_t show_temp_max_hyst(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_temp_hyst(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct jc42_data *data = jc42_update_device(dev); int temp, hyst; if (IS_ERR(data)) return PTR_ERR(data); - temp = jc42_temp_from_reg(data->temp_max); + temp = jc42_temp_from_reg(data->temp[attr->index]); hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) >> JC42_CFG_HYST_SHIFT]; return sprintf(buf, "%d\n", temp - hyst); } -/* write routines */ -#define set(value, reg) \ -static ssize_t set_##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct jc42_data *data = dev_get_drvdata(dev); \ - int err, ret = count; \ - long val; \ - if (kstrtol(buf, 10, &val) < 0) \ - return -EINVAL; \ - mutex_lock(&data->update_lock); \ - data->value = jc42_temp_to_reg(val, data->extended); \ - err = i2c_smbus_write_word_swapped(data->client, reg, data->value); \ - if (err < 0) \ - ret = err; \ - mutex_unlock(&data->update_lock); \ - return ret; \ -} +static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct jc42_data *data = dev_get_drvdata(dev); + int err, ret = count; + int nr = attr->index; + long val; -set(temp_min, JC42_REG_TEMP_LOWER); -set(temp_max, JC42_REG_TEMP_UPPER); -set(temp_crit, JC42_REG_TEMP_CRITICAL); + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + mutex_lock(&data->update_lock); + data->temp[nr] = jc42_temp_to_reg(val, data->extended); + err = i2c_smbus_write_word_swapped(data->client, temp_regs[nr], + data->temp[nr]); + if (err < 0) + ret = err; + mutex_unlock(&data->update_lock); + return ret; +} /* * JC42.4 compliant chips only support four hysteresis values. @@ -340,7 +307,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev, if (kstrtoul(buf, 10, &val) < 0) return -EINVAL; - diff = jc42_temp_from_reg(data->temp_crit) - val; + diff = jc42_temp_from_reg(data->temp[t_crit]) - val; hyst = 0; if (diff > 0) { if (diff < 2250) @@ -372,25 +339,20 @@ static ssize_t show_alarm(struct device *dev, if (IS_ERR(data)) return PTR_ERR(data); - val = data->temp_input; + val = data->temp[t_input]; if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY)) val = 0; return sprintf(buf, "%u\n", (val >> bit) & 1); } -static DEVICE_ATTR(temp1_input, S_IRUGO, - show_temp_input, NULL); -static DEVICE_ATTR(temp1_crit, S_IRUGO, - show_temp_crit, set_temp_crit); -static DEVICE_ATTR(temp1_min, S_IRUGO, - show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IRUGO, - show_temp_max, set_temp_max); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, t_input); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, set_temp, t_crit); +static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, set_temp, t_min); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, set_temp, t_max); -static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, - show_temp_crit_hyst, set_temp_crit_hyst); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, - show_temp_max_hyst, NULL); +static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_hyst, + set_temp_crit_hyst, t_crit); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_hyst, NULL, t_max); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, JC42_ALARM_CRIT_BIT); @@ -400,12 +362,12 @@ static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, JC42_ALARM_MAX_BIT); static struct attribute *jc42_attributes[] = { - &dev_attr_temp1_input.attr, - &dev_attr_temp1_crit.attr, - &dev_attr_temp1_min.attr, - &dev_attr_temp1_max.attr, - &dev_attr_temp1_crit_hyst.attr, - &dev_attr_temp1_max_hyst.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, @@ -420,12 +382,12 @@ static umode_t jc42_attribute_mode(struct kobject *kobj, unsigned int config = data->config; bool readonly; - if (attr == &dev_attr_temp1_crit.attr) + if (attr == &sensor_dev_attr_temp1_crit.dev_attr.attr) readonly = config & JC42_CFG_TCRIT_LOCK; - else if (attr == &dev_attr_temp1_min.attr || - attr == &dev_attr_temp1_max.attr) + else if (attr == &sensor_dev_attr_temp1_min.dev_attr.attr || + attr == &sensor_dev_attr_temp1_max.dev_attr.attr) readonly = config & JC42_CFG_EVENT_LOCK; - else if (attr == &dev_attr_temp1_crit_hyst.attr) + else if (attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr) readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK); else readonly = true; |