diff options
| -rw-r--r-- | drivers/mmc/card/block.c | 230 |
1 files changed, 182 insertions, 48 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 3200e2ca6a9d..ff347319ff80 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -525,6 +525,19 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) return result; } +static int send_stop(struct mmc_card *card, u32 *status) +{ + struct mmc_command cmd = {0}; + int err; + + cmd.opcode = MMC_STOP_TRANSMISSION; + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 5); + if (err == 0) + *status = cmd.resp[0]; + return err; +} + static int get_card_status(struct mmc_card *card, u32 *status, int retries) { struct mmc_command cmd = {0}; @@ -540,6 +553,137 @@ static int get_card_status(struct mmc_card *card, u32 *status, int retries) return err; } +#define ERR_RETRY 2 +#define ERR_ABORT 1 +#define ERR_CONTINUE 0 + +static int mmc_blk_cmd_error(struct request *req, const char *name, int error, + bool status_valid, u32 status) +{ + switch (error) { + case -EILSEQ: + /* response crc error, retry the r/w cmd */ + pr_err("%s: %s sending %s command, card status %#x\n", + req->rq_disk->disk_name, "response CRC error", + name, status); + return ERR_RETRY; + + case -ETIMEDOUT: + pr_err("%s: %s sending %s command, card status %#x\n", + req->rq_disk->disk_name, "timed out", name, status); + + /* If the status cmd initially failed, retry the r/w cmd */ + if (!status_valid) + return ERR_RETRY; + + /* + * If it was a r/w cmd crc error, or illegal command + * (eg, issued in wrong state) then retry - we should + * have corrected the state problem above. + */ + if (status & (R1_COM_CRC_ERROR | R1_ILLEGAL_COMMAND)) + return ERR_RETRY; + + /* Otherwise abort the command */ + return ERR_ABORT; + + default: + /* We don't understand the error code the driver gave us */ + pr_err("%s: unknown error %d sending read/write command, card status %#x\n", + req->rq_disk->disk_name, error, status); + return ERR_ABORT; + } +} + +/* + * Initial r/w and stop cmd error recovery. + * We don't know whether the card received the r/w cmd or not, so try to + * restore things back to a sane state. Essentially, we do this as follows: + * - Obtain card status. If the first attempt to obtain card status fails, + * the status word will reflect the failed status cmd, not the failed + * r/w cmd. If we fail to obtain card status, it suggests we can no + * longer communicate with the card. + * - Check the card state. If the card received the cmd but there was a + * transient problem with the response, it might still be in a data transfer + * mode. Try to send it a stop command. If this fails, we can't recover. + * - If the r/w cmd failed due to a response CRC error, it was probably + * transient, so retry the cmd. + * - If the r/w cmd timed out, but we didn't get the r/w cmd status, retry. + * - If the r/w cmd timed out, and the r/w cmd failed due to CRC error or + * illegal cmd, retry. + * Otherwise we don't understand what happened, so abort. + */ +static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, + struct mmc_blk_request *brq) +{ + bool prev_cmd_status_valid = true; + u32 status, stop_status = 0; + int err, retry; + + /* + * Try to get card status which indicates both the card state + * and why there was no response. If the first attempt fails, + * we can't be sure the returned status is for the r/w command. + */ + for (retry = 2; retry >= 0; retry--) { + err = get_card_status(card, &status, 0); + if (!err) + break; + + prev_cmd_status_valid = false; + pr_err("%s: error %d sending status command, %sing\n", + req->rq_disk->disk_name, err, retry ? "retry" : "abort"); + } + + /* We couldn't get a response from the card. Give up. */ + if (err) + return ERR_ABORT; + + /* + * Check the current card state. If it is in some data transfer + * mode, tell it to stop (and hopefully transition back to TRAN.) + */ + if (R1_CURRENT_STATE(status) == R1_STATE_DATA || + R1_CURRENT_STATE(status) == R1_STATE_RCV) { + err = send_stop(card, &stop_status); + if (err) + pr_err("%s: error %d sending stop command\n", + req->rq_disk->disk_name, err); + + /* + * If the stop cmd also timed out, the card is probably + * not present, so abort. Other errors are bad news too. + */ + if (err) + return ERR_ABORT; + } + + /* Check for set block count errors */ + if (brq->sbc.error) + return mmc_blk_cmd_error(req, "SET_BLOCK_COUNT", brq->sbc.error, + prev_cmd_status_valid, status); + + /* Check for r/w command errors */ + if (brq->cmd.error) + return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error, + prev_cmd_status_valid, status); + + /* Now for stop errors. These aren't fatal to the transfer. */ + pr_err("%s: error %d sending stop command, original cmd response %#x, card status %#x\n", + req->rq_disk->disk_name, brq->stop.error, + brq->cmd.resp[0], status); + + /* + * Subsitute in our own stop status as this will give the error + * state which happened during the execution of the r/w command. + */ + if (stop_status) { + brq->stop.resp[0] = stop_status; + brq->stop.error = 0; + } + return ERR_CONTINUE; +} + static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) { struct mmc_blk_data *md = mq->data; @@ -673,7 +817,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret = 1, disable_multi = 0; + int ret = 1, disable_multi = 0, retry = 0; /* * Reliable writes are used to implement Forced Unit Access and @@ -685,7 +829,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) (md->flags & MMC_BLK_REL_WR); do { - u32 readcmd, writecmd, status = 0; + u32 readcmd, writecmd; memset(&brq, 0, sizeof(struct mmc_blk_request)); brq.mrq.cmd = &brq.cmd; @@ -802,55 +946,29 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) mmc_queue_bounce_post(mq); /* - * Check for errors here, but don't jump to cmd_err - * until later as we need to wait for the card to leave - * programming mode even when things go wrong. + * sbc.error indicates a problem with the set block count + * command. No data will have been transferred. + * + * cmd.error indicates a problem with the r/w command. No + * data will have been transferred. + * + * stop.error indicates a problem with the stop command. Data + * may have been transferred, or may still be transferring. */ - if (brq.sbc.error || brq.cmd.error || - brq.data.error || brq.stop.error) { - if (brq.data.blocks > 1 && rq_data_dir(req) == READ) { - /* Redo read one sector at a time */ - printk(KERN_WARNING "%s: retrying using single " - "block read\n", req->rq_disk->disk_name); - disable_multi = 1; - continue; + if (brq.sbc.error || brq.cmd.error || brq.stop.error) { + switch (mmc_blk_cmd_recovery(card, req, &brq)) { + case ERR_RETRY: + if (retry++ < 5) + continue; + case ERR_ABORT: + goto cmd_abort; + case ERR_CONTINUE: + break; } - get_card_status(card, &status, 0); - } - - if (brq.sbc.error) { - printk(KERN_ERR "%s: error %d sending SET_BLOCK_COUNT " - "command, response %#x, card status %#x\n", - req->rq_disk->disk_name, brq.sbc.error, - brq.sbc.resp[0], status); - } - - if (brq.cmd.error) { - printk(KERN_ERR "%s: error %d sending read/write " - "command, response %#x, card status %#x\n", - req->rq_disk->disk_name, brq.cmd.error, - brq.cmd.resp[0], status); - } - - if (brq.data.error) { - if (brq.data.error == -ETIMEDOUT && brq.mrq.stop) - /* 'Stop' response contains card status */ - status = brq.mrq.stop->resp[0]; - printk(KERN_ERR "%s: error %d transferring data," - " sector %u, nr %u, card status %#x\n", - req->rq_disk->disk_name, brq.data.error, - (unsigned)blk_rq_pos(req), - (unsigned)blk_rq_sectors(req), status); - } - - if (brq.stop.error) { - printk(KERN_ERR "%s: error %d sending stop command, " - "response %#x, card status %#x\n", - req->rq_disk->disk_name, brq.stop.error, - brq.stop.resp[0], status); } if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { + u32 status; do { int err = get_card_status(card, &status, 5); if (err) { @@ -867,8 +985,22 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) (R1_CURRENT_STATE(status) == R1_STATE_PRG)); } - if (brq.cmd.error || brq.stop.error || brq.data.error) { + if (brq.data.error) { + pr_err("%s: error %d transferring data, sector %u nr %u, cmd response %#x card status %#x\n", + req->rq_disk->disk_name, brq.data.error, + (unsigned)blk_rq_pos(req), + (unsigned)blk_rq_sectors(req), + brq.cmd.resp[0], brq.stop.resp[0]); + if (rq_data_dir(req) == READ) { + if (brq.data.blocks > 1) { + /* Redo read one sector at a time */ + pr_warning("%s: retrying using single block read\n", + req->rq_disk->disk_name); + disable_multi = 1; + continue; + } + /* * After an error, we redo I/O one sector at a * time, so we only reach here after trying to @@ -878,8 +1010,9 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) ret = __blk_end_request(req, -EIO, brq.data.blksz); spin_unlock_irq(&md->lock); continue; + } else { + goto cmd_err; } - goto cmd_err; } /* @@ -916,6 +1049,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) spin_unlock_irq(&md->lock); } + cmd_abort: spin_lock_irq(&md->lock); while (ret) ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req)); |