diff options
| -rw-r--r-- | Documentation/power/regulator/machine.txt | 140 | ||||
| -rw-r--r-- | Documentation/power/regulator/regulator.txt | 8 | ||||
| -rw-r--r-- | drivers/regulator/bq24022.c | 21 | ||||
| -rw-r--r-- | drivers/regulator/core.c | 457 | ||||
| -rw-r--r-- | include/linux/regulator/driver.h | 8 | ||||
| -rw-r--r-- | include/linux/regulator/machine.h | 30 |
6 files changed, 334 insertions, 330 deletions
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index c9a35665cf70..ce3487d99abe 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -2,17 +2,8 @@ Regulator Machine Driver Interface =================================== The regulator machine driver interface is intended for board/machine specific -initialisation code to configure the regulator subsystem. Typical things that -machine drivers would do are :- +initialisation code to configure the regulator subsystem. - 1. Regulator -> Device mapping. - 2. Regulator supply configuration. - 3. Power Domain constraint setting. - - - -1. Regulator -> device mapping -============================== Consider the following machine :- Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] @@ -21,81 +12,82 @@ Consider the following machine :- The drivers for consumers A & B must be mapped to the correct regulator in order to control their power supply. This mapping can be achieved in machine -initialisation code by calling :- +initialisation code by creating a struct regulator_consumer_supply for +each regulator. + +struct regulator_consumer_supply { + struct device *dev; /* consumer */ + const char *supply; /* consumer supply - e.g. "vcc" */ +}; -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply); +e.g. for the machine above -and is shown with the following code :- +static struct regulator_consumer_supply regulator1_consumers[] = { +{ + .dev = &platform_consumerB_device.dev, + .supply = "Vcc", +},}; -regulator_set_device_supply("Regulator-1", devB, "Vcc"); -regulator_set_device_supply("Regulator-2", devA, "Vcc"); +static struct regulator_consumer_supply regulator2_consumers[] = { +{ + .dev = &platform_consumerA_device.dev, + .supply = "Vcc", +},}; This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2 to the 'Vcc' supply for Consumer A. - -2. Regulator supply configuration. -================================== -Consider the following machine (again) :- - - Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] - | - +-> [Consumer B @ 3.3V] +Constraints can now be registered by defining a struct regulator_init_data +for each regulator power domain. This structure also maps the consumers +to their supply regulator :- + +static struct regulator_init_data regulator1_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(regulator1_consumers), + .consumer_supplies = regulator1_consumers, +}; Regulator-1 supplies power to Regulator-2. This relationship must be registered with the core so that Regulator-1 is also enabled when Consumer A enables it's -supply (Regulator-2). - -This relationship can be register with the core via :- - -int regulator_set_supply(const char *regulator, const char *regulator_supply); - -In this example we would use the following code :- - -regulator_set_supply("Regulator-2", "Regulator-1"); - -Relationships can be queried by calling :- - -const char *regulator_get_supply(const char *regulator); - - -3. Power Domain constraint setting. -=================================== -Each power domain within a system has physical constraints on voltage and -current. This must be defined in software so that the power domain is always -operated within specifications. - -Consider the following machine (again) :- - - Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] - | - +-> [Consumer B @ 3.3V] - -This gives us two regulators and two power domains: - - Domain 1: Regulator-2, Consumer B. - Domain 2: Consumer A. - -Constraints can be registered by calling :- - -int regulator_set_platform_constraints(const char *regulator, - struct regulation_constraints *constraints); - -The example is defined as follows :- - -struct regulation_constraints domain_1 = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, +supply (Regulator-2). The supply regulator is set by the supply_regulator_dev +field below:- + +static struct regulator_init_data regulator2_data = { + .supply_regulator_dev = &platform_regulator1_device.dev, + .constraints = { + .min_uV = 1800000, + .max_uV = 2000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(regulator2_consumers), + .consumer_supplies = regulator2_consumers, }; -struct regulation_constraints domain_2 = { - .min_uV = 1800000, - .max_uV = 2000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, +Finally the regulator devices must be registered in the usual manner. + +static struct platform_device regulator_devices[] = { +{ + .name = "regulator", + .id = DCDC_1, + .dev = { + .platform_data = ®ulator1_data, + }, +}, +{ + .name = "regulator", + .id = DCDC_2, + .dev = { + .platform_data = ®ulator2_data, + }, +}, }; +/* register regulator 1 device */ +platform_device_register(&wm8350_regulator_devices[0]); -regulator_set_platform_constraints("Regulator-1", &domain_1); -regulator_set_platform_constraints("Regulator-2", &domain_2); +/* register regulator 2 device */ +platform_device_register(&wm8350_regulator_devices[1]); diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt index a69050143592..4200accb9bba 100644 --- a/Documentation/power/regulator/regulator.txt +++ b/Documentation/power/regulator/regulator.txt @@ -10,11 +10,11 @@ Registration Drivers can register a regulator by calling :- -struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data); +struct regulator_dev *regulator_register(struct device *dev, + struct regulator_desc *regulator_desc); -This will register the regulators capabilities and operations the regulator -core. The core does not touch reg_data (private to regulator driver). +This will register the regulators capabilities and operations to the regulator +core. Regulators can be unregistered by calling :- diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 263699d6152d..366565aba865 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -18,13 +18,13 @@ #include <linux/regulator/bq24022.h> #include <linux/regulator/driver.h> + static int bq24022_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "setting current limit to %s mA\n", + dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n", max_uA >= 500000 ? "500" : "100"); /* REVISIT: maybe return error if min_uA != 0 ? */ @@ -34,18 +34,16 @@ static int bq24022_set_current_limit(struct regulator_dev *rdev, static int bq24022_get_current_limit(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000; } static int bq24022_enable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "enabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "enabling charger\n"); gpio_set_value(pdata->gpio_nce, 0); return 0; @@ -53,10 +51,9 @@ static int bq24022_enable(struct regulator_dev *rdev) static int bq24022_disable(struct regulator_dev *rdev) { - struct platform_device *pdev = rdev_get_drvdata(rdev); - struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); - dev_dbg(&pdev->dev, "disabling charger\n"); + dev_dbg(rdev_get_dev(rdev), "disabling charger\n"); gpio_set_value(pdata->gpio_nce, 1); return 0; @@ -108,7 +105,7 @@ static int __init bq24022_probe(struct platform_device *pdev) ret = gpio_direction_output(pdata->gpio_iset2, 0); ret = gpio_direction_output(pdata->gpio_nce, 1); - bq24022 = regulator_register(&bq24022_desc, pdev); + bq24022 = regulator_register(&bq24022_desc, &pdev->dev, pdata); if (IS_ERR(bq24022)) { dev_dbg(&pdev->dev, "couldn't register regulator\n"); ret = PTR_ERR(bq24022); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9c7986261568..84202eaace57 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2,8 +2,9 @@ * core.c -- Voltage/Current Regulator framework. * * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * Copyright 2008 SlimLogic Ltd. * - * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * Author: Liam Girdwood <lrg@slimlogic.co.uk> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -64,14 +65,9 @@ struct regulator_map { struct list_head list; struct device *dev; const char *supply; - const char *regulator; + struct regulator_dev *regulator; }; -static inline struct regulator_dev *to_rdev(struct device *d) -{ - return container_of(d, struct regulator_dev, dev); -} - /* * struct regulator * @@ -227,7 +223,7 @@ static ssize_t device_requested_uA_show(struct device *dev, static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); ssize_t ret; mutex_lock(&rdev->mutex); @@ -240,7 +236,7 @@ static ssize_t regulator_uV_show(struct device *dev, static ssize_t regulator_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); } @@ -248,7 +244,7 @@ static ssize_t regulator_uA_show(struct device *dev, static ssize_t regulator_opmode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int mode = _regulator_get_mode(rdev); switch (mode) { @@ -267,7 +263,7 @@ static ssize_t regulator_opmode_show(struct device *dev, static ssize_t regulator_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); int state = _regulator_is_enabled(rdev); if (state > 0) @@ -281,7 +277,7 @@ static ssize_t regulator_state_show(struct device *dev, static ssize_t regulator_min_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -292,7 +288,7 @@ static ssize_t regulator_min_uA_show(struct device *dev, static ssize_t regulator_max_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -303,7 +299,7 @@ static ssize_t regulator_max_uA_show(struct device *dev, static ssize_t regulator_min_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -314,7 +310,7 @@ static ssize_t regulator_min_uV_show(struct device *dev, static ssize_t regulator_max_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "constraint not defined\n"); @@ -325,7 +321,7 @@ static ssize_t regulator_max_uV_show(struct device *dev, static ssize_t regulator_total_uA_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); struct regulator *regulator; int uA = 0; @@ -339,14 +335,14 @@ static ssize_t regulator_total_uA_show(struct device *dev, static ssize_t regulator_num_users_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", rdev->use_count); } static ssize_t regulator_type_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); switch (rdev->desc->type) { case REGULATOR_VOLTAGE: @@ -360,7 +356,7 @@ static ssize_t regulator_type_show(struct device *dev, static ssize_t regulator_suspend_mem_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -370,7 +366,7 @@ static ssize_t regulator_suspend_mem_uV_show(struct device *dev, static ssize_t regulator_suspend_disk_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -380,7 +376,7 @@ static ssize_t regulator_suspend_disk_uV_show(struct device *dev, static ssize_t regulator_suspend_standby_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -406,7 +402,7 @@ static ssize_t suspend_opmode_show(struct regulator_dev *rdev, static ssize_t regulator_suspend_mem_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -417,7 +413,7 @@ static ssize_t regulator_suspend_mem_mode_show(struct device *dev, static ssize_t regulator_suspend_disk_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -428,7 +424,7 @@ static ssize_t regulator_suspend_disk_mode_show(struct device *dev, static ssize_t regulator_suspend_standby_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -439,7 +435,7 @@ static ssize_t regulator_suspend_standby_mode_show(struct device *dev, static ssize_t regulator_suspend_mem_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -453,7 +449,7 @@ static ssize_t regulator_suspend_mem_state_show(struct device *dev, static ssize_t regulator_suspend_disk_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -467,7 +463,7 @@ static ssize_t regulator_suspend_disk_state_show(struct device *dev, static ssize_t regulator_suspend_standby_state_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); if (!rdev->constraints) return sprintf(buf, "not defined\n"); @@ -512,7 +508,7 @@ static struct device_attribute regulator_dev_attrs[] = { static void regulator_dev_release(struct device *dev) { - struct regulator_dev *rdev = to_rdev(dev); + struct regulator_dev *rdev = dev_get_drvdata(dev); kfree(rdev); } @@ -569,8 +565,11 @@ static int suspend_set_state(struct regulator_dev *rdev, /* enable & disable are mandatory for suspend control */ if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) + !rdev->desc->ops->set_suspend_disable) { + printk(KERN_ERR "%s: no way to set suspend state\n", + __func__); return -EINVAL; + } if (rstate->enabled) ret = rdev->desc->ops->set_suspend_enable(rdev); @@ -656,6 +655,125 @@ static void print_constraints(struct regulator_dev *rdev) printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); } +/** + * set_machine_constraints - sets regulator constraints + * @regulator: regulator source + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + + rdev->constraints = constraints; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + rdev->desc->ops->set_voltage) { + ret = rdev->desc->ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV" + " constraint\n", __func__, + rdev->constraints->min_uV); + rdev->constraints = NULL; + goto out; + } + } + + /* are we enabled at boot time by firmware / bootloader */ + if (rdev->constraints->boot_on) + rdev->use_count = 1; + + /* do we need to setup our suspend state */ + if (constraints->initial_state) + ret = suspend_prepare(rdev, constraints->initial_state); + + print_constraints(rdev); +out: + return ret; +} + +/** + * set_supply - set regulator supply regulator + * @regulator: regulator name + * @supply: supply regulator name + * + * Called by platform initialisation code to set the supply regulator for this + * regulator. This ensures that a regulators supply will also be enabled by the + * core if it's child is enabled. + */ +static int set_supply(struct regulator_dev *rdev, + struct regulator_dev *supply_rdev) +{ + int err; + + err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, + "supply"); + if (err) { + printk(KERN_ERR + "%s: could not add device link %s err %d\n", + __func__, supply_rdev->dev.kobj.name, err); + goto out; + } + rdev->supply = supply_rdev; + list_add(&rdev->slist, &supply_rdev->supply_list); +out: + return err; +} + +/** + * set_consumer_device_supply: Bind a regulator to a symbolic supply + * @regulator: regulator source + * @dev: device the supply applies to + * @supply: symbolic name for supply + * + * Allows platform initialisation code to map physical regulator + * sources to symbolic names for supplies for use by devices. Devices + * should use these symbolic names to request regulators, avoiding the + * need to provide board-specific regulator names as platform data. + */ +static int set_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev, const char *supply) +{ + struct regulator_map *node; + + if (supply == NULL) + return -EINVAL; + + node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (node == NULL) + return -ENOMEM; + + node->regulator = rdev; + node->dev = consumer_dev; + node->supply = supply; + + list_add(&node->list, ®ulator_map_list); + return 0; +} + +static void unset_consumer_device_supply(struct regulator_dev *rdev, + struct device *consumer_dev) +{ + struct regulator_map *node, *n; + + list_for_each_entry_safe(node, n, ®ulator_map_list, list) { + if (rdev == node->regulator && + consumer_dev == node->dev) { + list_del(&node->list); + kfree(node); + return; + } + } +} + #define REG_STR_SIZE 32 static struct regulator *create_regulator(struct regulator_dev *rdev, @@ -746,7 +864,6 @@ struct regulator *regulator_get(struct device *dev, const char *id) struct regulator_dev *rdev; struct regulator_map *map; struct regulator *regulator = ERR_PTR(-ENODEV); - const char *supply = id; if (id == NULL) { printk(KERN_ERR "regulator: get() with no identifier\n"); @@ -758,15 +875,9 @@ struct regulator *regulator_get(struct device *dev, const char *id) list_for_each_entry(map, ®ulator_map_list, list) { if (dev == map->dev && strcmp(map->supply, id) == 0) { - supply = map->regulator; - break; - } - } - - list_for_each_entry(rdev, ®ulator_list, list) { - if (strcmp(supply, rdev->desc->name) == 0 && - try_module_get(rdev->owner)) + rdev = map->regulator; goto found; + } } printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n", id); @@ -774,12 +885,16 @@ struct regulator *regulator_get(struct device *dev, const char *id) return regulator; found: + if (!try_module_get(rdev->owner)) + goto out; + regulator = create_regulator(rdev, dev, id); if (regulator == NULL) { regulator = ERR_PTR(-ENOMEM); module_put(rdev->owner); } +out: mutex_unlock(®ulator_list_mutex); return regulator; } @@ -1559,11 +1674,12 @@ EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); * Returns 0 on success. */ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data) + struct device *dev, void *driver_data) { static atomic_t regulator_no = ATOMIC_INIT(0); struct regulator_dev *rdev; - int ret; + struct regulator_init_data *init_data = dev->platform_data; + int ret, i; if (regulator_desc == NULL) return ERR_PTR(-EINVAL); @@ -1582,7 +1698,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, mutex_lock(®ulator_list_mutex); mutex_init(&rdev->mutex); - rdev->reg_data = reg_data; + rdev->reg_data = driver_data; rdev->owner = regulator_desc->owner; rdev->desc = regulator_desc; INIT_LIST_HEAD(&rdev->consumer_list); @@ -1591,20 +1707,68 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, INIT_LIST_HEAD(&rdev->slist); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); + /* preform any regulator specific init */ + if (init_data->regulator_init) { + ret = init_data->regulator_init(rdev->reg_data); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + /* set regulator constraints */ + ret = set_machine_constraints(rdev, &init_data->constraints); + if (ret < 0) { + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + + /* register with sysfs */ rdev->dev.class = ®ulator_class; - device_initialize(&rdev->dev); + rdev->dev.parent = dev; snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id), - "regulator_%ld_%s", - (unsigned long)atomic_inc_return(®ulator_no) - 1, - regulator_desc->name); - - ret = device_add(&rdev->dev); - if (ret == 0) - list_add(&rdev->list, ®ulator_list); - else { + "regulator.%d", atomic_inc_return(®ulator_no) - 1); + ret = device_register(&rdev->dev); + if (ret != 0) { kfree(rdev); rdev = ERR_PTR(ret); + goto out; + } + + dev_set_drvdata(&rdev->dev, rdev); + + /* set supply regulator if it exists */ + if (init_data->supply_regulator_dev) { + ret = set_supply(rdev, + dev_get_drvdata(init_data->supply_regulator_dev)); + if (ret < 0) { + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } + } + + /* add consumers devices */ + for (i = 0; i < init_data->num_consumer_supplies; i++) { + ret = set_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev, + init_data->consumer_supplies[i].supply); + if (ret < 0) { + for (--i; i >= 0; i--) + unset_consumer_device_supply(rdev, + init_data->consumer_supplies[i].dev); + device_unregister(&rdev->dev); + kfree(rdev); + rdev = ERR_PTR(ret); + goto out; + } } + + list_add(&rdev->list, ®ulator_list); +out: mutex_unlock(®ulator_list_mutex); return rdev; } @@ -1631,187 +1795,6 @@ void regulator_unregister(struct regulator_dev *rdev) EXPORT_SYMBOL_GPL(regulator_unregister); /** - * regulator_set_supply - set regulator supply regulator - * @regulator: regulator name - * @supply: supply regulator name - * - * Called by platform initialisation code to set the supply regulator for this - * regulator. This ensures that a regulators supply will also be enabled by the - * core if it's child is enabled. - */ -int regulator_set_supply(const char *regulator, const char *supply) -{ - struct regulator_dev *rdev, *supply_rdev; - int err; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found_regulator; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_regulator: - list_for_each_entry(supply_rdev, ®ulator_list, list) { - if (!strcmp(supply_rdev->desc->name, supply)) - goto found_supply; - } - mutex_unlock(®ulator_list_mutex); - return -ENODEV; - -found_supply: - err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, - "supply"); - if (err) { - printk(KERN_ERR - "%s: could not add device link %s err %d\n", - __func__, supply_rdev->dev.kobj.name, err); - goto out; - } - rdev->supply = supply_rdev; - list_add(&rdev->slist, &supply_rdev->supply_list); -out: - mutex_unlock(®ulator_list_mutex); - return err; -} -EXPORT_SYMBOL_GPL(regulator_set_supply); - -/** - * regulator_get_supply - get regulator supply regulator - * @regulator: regulator name - * - * Returns the supply supply regulator name or NULL if no supply regulator - * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc) - */ -const char *regulator_get_supply(const char *regulator) -{ - struct regulator_dev *rdev; - - if (regulator == NULL) - return NULL; - - mutex_lock(®ulator_list_mutex); - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(rdev->desc->name, regulator)) - goto found; - } - mutex_unlock(®ulator_list_mutex); - return NULL; - -found: - mutex_unlock(®ulator_list_mutex); - if (rdev->supply) - return rdev->supply->desc->name; - else - return NULL; -} -EXPORT_SYMBOL_GPL(regulator_get_supply); - -/** - * regulator_set_machine_constraints - sets regulator constraints - * @regulator: regulator source - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -int regulator_set_machine_constraints(const char *regulator_name, - struct regulation_constraints *constraints) -{ - struct regulator_dev *rdev; - int ret = 0; - - if (regulator_name == NULL) - return -EINVAL; - - mutex_lock(®ulator_list_mutex); - - list_for_each_entry(rdev, ®ulator_list, list) { - if (!strcmp(regulator_name, rdev->desc->name)) - goto found; - } - ret = -ENODEV; - goto out; - -found: - mutex_lock(&rdev->mutex); - rdev->constraints = constraints; - - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - rdev->desc->ops->set_voltage) { - ret = rdev->desc->ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV" - " constraint\n", __func__, - rdev->constraints->min_uV); - rdev->constraints = NULL; - goto out; - } - } - - /* are we enabled at boot time by firmware / bootloader */ - if (rdev->constraints->boot_on) - rdev->use_count = 1; - - /* do we need to setup our suspend state */ - if (constraints->initial_state) - ret = suspend_prepare(rdev, constraints->initial_state); - - print_constraints(rdev); - mutex_unlock(&rdev->mutex); - -out: - mutex_unlock(®ulator_list_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(regulator_set_machine_constraints); - - -/** - * regulator_set_device_supply: Bind a regulator to a symbolic supply - * @regulator: regulator source - * @dev: device the supply applies to - * @supply: symbolic name for supply - * - * Allows platform initialisation code to map physical regulator - * sources to symbolic names for supplies for use by devices. Devices - * should use these symbolic names to request regulators, avoiding the - * need to provide board-specific regulator names as platform data. - */ -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply) -{ - struct regulator_map *node; - - if (regulator == NULL || supply == NULL) - return -EINVAL; - - node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); - if (node == NULL) - return -ENOMEM; - - node->regulator = regulator; - node->dev = dev; - node->supply = supply; - - mutex_lock(®ulator_list_mutex); - list_add(&node->list, ®ulator_map_list); - mutex_unlock(®ulator_list_mutex); - return 0; -} -EXPORT_SYMBOL_GPL(regulator_set_device_supply); - -/** * regulator_suspend_prepare: prepare regulators for system wide suspend * @state: system suspend state * @@ -1893,6 +1876,18 @@ int rdev_get_id(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(rdev_get_id); +struct device *rdev_get_dev(struct regulator_dev *rdev) +{ + return &rdev->dev; +} +EXPORT_SYMBOL_GPL(rdev_get_dev); + +void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data) +{ + return reg_init_data->driver_data; +} +EXPORT_SYMBOL_GPL(regulator_get_init_drvdata); + static int __init regulator_init(void) { printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 1d712c7172a2..bc01b42a8583 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -18,8 +18,8 @@ #include <linux/device.h> #include <linux/regulator/consumer.h> -struct regulator_constraints; struct regulator_dev; +struct regulator_init_data; /** * struct regulator_ops - regulator operations. @@ -85,15 +85,17 @@ struct regulator_desc { struct module *owner; }; - struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data); + struct device *dev, void *driver_data); void regulator_unregister(struct regulator_dev *rdev); int regulator_notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); void *rdev_get_drvdata(struct regulator_dev *rdev); +struct device *rdev_get_dev(struct regulator_dev *rdev); int rdev_get_id(struct regulator_dev *rdev); +void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); + #endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 11e737dbfcf2..c6d69331a81e 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -89,15 +89,33 @@ struct regulation_constraints { unsigned apply_uV:1; /* apply uV constraint iff min == max */ }; -int regulator_set_supply(const char *regulator, const char *regulator_supply); +/** + * struct regulator_consumer_supply - supply -> device mapping + * + * This maps a supply name to a device. + */ +struct regulator_consumer_supply { + struct device *dev; /* consumer */ + const char *supply; /* consumer supply - e.g. "vcc" */ +}; -const char *regulator_get_supply(const char *regulator); +/** + * struct regulator_init_data - regulator platform initialisation data. + * + * Initialisation constraints, our supply and consumers supplies. + */ +struct regulator_init_data { + struct device *supply_regulator_dev; /* or NULL for LINE */ -int regulator_set_machine_constraints(const char *regulator, - struct regulation_constraints *constraints); + struct regulation_constraints constraints; -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply); + int num_consumer_supplies; + struct regulator_consumer_supply *consumer_supplies; + + /* optional regulator machine specific init */ + int (*regulator_init)(void *driver_data); + void *driver_data; /* core does not touch this */ +}; int regulator_suspend_prepare(suspend_state_t state); |