diff options
25 files changed, 1305 insertions, 266 deletions
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt index 474531d2b2c5..da8c5b73ad10 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -3,15 +3,39 @@ Binding for Thermal Sensor driver for BCM2835 SoCs. Required parameters: ------------------- -compatible: should be one of: "brcm,bcm2835-thermal", - "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" -reg: Address range of the thermal registers. -clocks: Phandle of the clock used by the thermal sensor. +compatible: should be one of: "brcm,bcm2835-thermal", + "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" +reg: Address range of the thermal registers. +clocks: Phandle of the clock used by the thermal sensor. +#thermal-sensor-cells: should be 0 (see thermal.txt) Example: +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + coefficients = <(-538) 407000>; + + cooling-maps { + }; + }; +}; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal new file mode 100644 index 000000000000..68e047170039 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal @@ -0,0 +1,37 @@ +* Broadcom Northstar Thermal + +This binding describes thermal sensor that is part of Northstar's DMU (Device +Management Unit). + +Required properties: +- compatible : Must be "brcm,ns-thermal" +- reg : iomem address range of PVTMON registers +- #thermal-sensor-cells : Should be <0> + +Example: + +thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; +}; + +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt new file mode 100644 index 000000000000..e241bb5a5584 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt @@ -0,0 +1,36 @@ +* Dialog DA9062/61 TJUNC Thermal Module + +This module is part of the DA9061/DA9062. For more details about entire +DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt + +Junction temperature thermal module uses an interrupt signal to identify +high THERMAL_TRIP_HOT temperatures for the PMIC device. + +Required properties: + +- compatible: should be one of the following valid compatible string lines: + "dlg,da9061-thermal", "dlg,da9062-thermal" + "dlg,da9062-thermal" + +Optional properties: + +- polling-delay-passive : Specify the polling period, measured in + milliseconds, between thermal zone device update checks. + +Example: DA9062 + + pmic0: da9062@58 { + thermal { + compatible = "dlg,da9062-thermal"; + polling-delay-passive = <3000>; + }; + }; + +Example: DA9061 using a fall-back compatible for the DA9062 onkey driver + + pmic0: da9061@58 { + thermal { + compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; + polling-delay-passive = <3000>; + }; + }; diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index ef473dc7f55e..bb9a0a53e76b 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -582,3 +582,24 @@ platform data is provided, this uses the step_wise throttling policy. This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. + +6. thermal_emergency_poweroff: + +On an event of critical trip temperature crossing. Thermal framework +allows the system to shutdown gracefully by calling orderly_poweroff(). +In the event of a failure of orderly_poweroff() to shut down the system +we are in danger of keeping the system alive at undesirably high +temperatures. To mitigate this high risk scenario we program a work +queue to fire after a pre-determined number of seconds to start +an emergency shutdown of the device using the kernel_power_off() +function. In case kernel_power_off() fails then finally +emergency_restart() is called in the worst case. + +The delay should be carefully profiled so as to give adequate time for +orderly_poweroff(). In case of failure of an orderly_poweroff() the +emergency poweroff kicks in after the delay has elapsed and shuts down +the system. + +If set to 0 emergency poweroff will not be supported. So a carefully +profiled non-zero positive value is a must for emergerncy poweroff to be +triggered. diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 6871ecc5b951..b5b5facb8747 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -15,6 +15,23 @@ menuconfig THERMAL if THERMAL +config THERMAL_EMERGENCY_POWEROFF_DELAY_MS + int "Emergency poweroff delay in milli-seconds" + depends on THERMAL + default 0 + help + Thermal subsystem will issue a graceful shutdown when + critical temperatures are reached using orderly_poweroff(). In + case of failure of an orderly_poweroff(), the thermal emergency + poweroff kicks in after a delay has elapsed and shuts down the system. + This config is number of milliseconds to delay before emergency + poweroff kicks in. Similarly to the critical trip point, + the delay should be carefully profiled so as to give adequate + time for orderly_poweroff() to finish on regular execution. + If set to 0 emergency poweroff will not be supported. + + In doubt, leave as 0. + config THERMAL_HWMON bool prompt "Expose thermal sensors as hwmon device" @@ -291,6 +308,16 @@ config ARMADA_THERMAL Enable this option if you want to have support for thermal management controller present in Armada 370 and Armada XP SoC. +config DA9062_THERMAL + tristate "DA9062/DA9061 Dialog Semiconductor thermal driver" + depends on MFD_DA9062 || COMPILE_TEST + depends on OF + help + Enable this for the Dialog Semiconductor thermal sensor driver. + This will report PMIC junction over-temperature for one thermal trip + zone. + Compatible with the DA9062 and DA9061 PMICs. + config INTEL_POWERCLAMP tristate "Intel PowerClamp idle injection driver" depends on THERMAL @@ -380,6 +407,11 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs +menu "Broadcom thermal drivers" +depends on ARCH_BCM || COMPILE_TEST +source "drivers/thermal/broadcom/Kconfig" +endmenu + menu "Texas Instruments thermal drivers" depends on ARCH_HAS_BANDGAP || COMPILE_TEST depends on HAS_IOMEM diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index c2372f10dae5..094d7039981c 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -27,6 +27,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o # platform thermal drivers +obj-y += broadcom/ obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o @@ -41,6 +42,7 @@ obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o +obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig new file mode 100644 index 000000000000..ab08af4654ef --- /dev/null +++ b/drivers/thermal/broadcom/Kconfig @@ -0,0 +1,16 @@ +config BCM2835_THERMAL + tristate "Thermal sensors on bcm2835 SoC" + depends on ARCH_BCM2835 || COMPILE_TEST + depends on HAS_IOMEM + depends on THERMAL_OF + help + Support for thermal sensors on Broadcom bcm2835 SoCs. + +config BCM_NS_THERMAL + tristate "Northstar thermal driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + help + Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, + BCM4709 and BCM47094. It contains DMU (Device Management Unit) block + with a thermal sensor that allows checking CPU temperature. This + driver provides support for it. diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile new file mode 100644 index 000000000000..c6f62e4fd0ee --- /dev/null +++ b/drivers/thermal/broadcom/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o +obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c new file mode 100644 index 000000000000..0ecf80890c84 --- /dev/null +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -0,0 +1,314 @@ +/* + * Driver for Broadcom BCM2835 SoC temperature sensor + * + * Copyright (C) 2016 Martin Sperl + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/thermal.h> + +#define BCM2835_TS_TSENSCTL 0x00 +#define BCM2835_TS_TSENSSTAT 0x04 + +#define BCM2835_TS_TSENSCTL_PRWDW BIT(0) +#define BCM2835_TS_TSENSCTL_RSTB BIT(1) + +/* + * bandgap reference voltage in 6 mV increments + * 000b = 1178 mV, 001b = 1184 mV, ... 111b = 1220 mV + */ +#define BCM2835_TS_TSENSCTL_CTRL_BITS 3 +#define BCM2835_TS_TSENSCTL_CTRL_SHIFT 2 +#define BCM2835_TS_TSENSCTL_CTRL_MASK \ + GENMASK(BCM2835_TS_TSENSCTL_CTRL_BITS + \ + BCM2835_TS_TSENSCTL_CTRL_SHIFT - 1, \ + BCM2835_TS_TSENSCTL_CTRL_SHIFT) +#define BCM2835_TS_TSENSCTL_CTRL_DEFAULT 1 +#define BCM2835_TS_TSENSCTL_EN_INT BIT(5) +#define BCM2835_TS_TSENSCTL_DIRECT BIT(6) +#define BCM2835_TS_TSENSCTL_CLR_INT BIT(7) +#define BCM2835_TS_TSENSCTL_THOLD_SHIFT 8 +#define BCM2835_TS_TSENSCTL_THOLD_BITS 10 +#define BCM2835_TS_TSENSCTL_THOLD_MASK \ + GENMASK(BCM2835_TS_TSENSCTL_THOLD_BITS + \ + BCM2835_TS_TSENSCTL_THOLD_SHIFT - 1, \ + BCM2835_TS_TSENSCTL_THOLD_SHIFT) +/* + * time how long the block to be asserted in reset + * which based on a clock counter (TSENS clock assumed) + */ +#define BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT 18 +#define BCM2835_TS_TSENSCTL_RSTDELAY_BITS 8 +#define BCM2835_TS_TSENSCTL_REGULEN BIT(26) + +#define BCM2835_TS_TSENSSTAT_DATA_BITS 10 +#define BCM2835_TS_TSENSSTAT_DATA_SHIFT 0 +#define BCM2835_TS_TSENSSTAT_DATA_MASK \ + GENMASK(BCM2835_TS_TSENSSTAT_DATA_BITS + \ + BCM2835_TS_TSENSSTAT_DATA_SHIFT - 1, \ + BCM2835_TS_TSENSSTAT_DATA_SHIFT) +#define BCM2835_TS_TSENSSTAT_VALID BIT(10) +#define BCM2835_TS_TSENSSTAT_INTERRUPT BIT(11) + +struct bcm2835_thermal_data { + struct thermal_zone_device *tz; + void __iomem *regs; + struct clk *clk; + struct dentry *debugfsdir; +}; + +static int bcm2835_thermal_adc2temp(u32 adc, int offset, int slope) +{ + return offset + slope * adc; +} + +static int bcm2835_thermal_temp2adc(int temp, int offset, int slope) +{ + temp -= offset; + temp /= slope; + + if (temp < 0) + temp = 0; + if (temp >= BIT(BCM2835_TS_TSENSSTAT_DATA_BITS)) + temp = BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1; + + return temp; +} + +static int bcm2835_thermal_get_temp(void *d, int *temp) +{ + struct bcm2835_thermal_data *data = d; + u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT); + + if (!(val & BCM2835_TS_TSENSSTAT_VALID)) + return -EIO; + + val &= BCM2835_TS_TSENSSTAT_DATA_MASK; + + *temp = bcm2835_thermal_adc2temp( + val, + thermal_zone_get_offset(data->tz), + thermal_zone_get_slope(data->tz)); + + return 0; +} + +static const struct debugfs_reg32 bcm2835_thermal_regs[] = { + { + .name = "ctl", + .offset = 0 + }, + { + .name = "stat", + .offset = 4 + } +}; + +static void bcm2835_thermal_debugfs(struct platform_device *pdev) +{ + struct thermal_zone_device *tz = platform_get_drvdata(pdev); + struct bcm2835_thermal_data *data = tz->devdata; + struct debugfs_regset32 *regset; + + data->debugfsdir = debugfs_create_dir("bcm2835_thermal", NULL); + if (!data->debugfsdir) + return; + + regset = devm_kzalloc(&pdev->dev, sizeof(*regset), GFP_KERNEL); + if (!regset) + return; + + regset->regs = bcm2835_thermal_regs; + regset->nregs = ARRAY_SIZE(bcm2835_thermal_regs); + regset->base = data->regs; + + debugfs_create_regset32("regset", 0444, data->debugfsdir, regset); +} + +static struct thermal_zone_of_device_ops bcm2835_thermal_ops = { + .get_temp = bcm2835_thermal_get_temp, +}; + +/* + * Note: as per Raspberry Foundation FAQ + * (https://www.raspberrypi.org/help/faqs/#performanceOperatingTemperature) + * the recommended temperature range for the SoC -40C to +85C + * so the trip limit is set to 80C. + * this applies to all the BCM283X SoC + */ + +static const struct of_device_id bcm2835_thermal_of_match_table[] = { + { + .compatible = "brcm,bcm2835-thermal", + }, + { + .compatible = "brcm,bcm2836-thermal", + }, + { + .compatible = "brcm,bcm2837-thermal", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table); + +static int bcm2835_thermal_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct thermal_zone_device *tz; + struct bcm2835_thermal_data *data; + struct resource *res; + int err = 0; + u32 val; + unsigned long rate; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + match = of_match_device(bcm2835_thermal_of_match_table, + &pdev->dev); + if (!match) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->regs)) { + err = PTR_ERR(data->regs); + dev_err(&pdev->dev, "Could not get registers: %d\n", err); + return err; + } + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) { + err = PTR_ERR(data->clk); + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, "Could not get clk: %d\n", err); + return err; + } + + err = clk_prepare_enable(data->clk); + if (err) + return err; + + rate = clk_get_rate(data->clk); + if ((rate < 1920000) || (rate > 5000000)) + dev_warn(&pdev->dev, + "Clock %pCn running at %pCr Hz is outside of the recommended range: 1.92 to 5MHz\n", + data->clk, data->clk); + + /* register of thermal sensor and get info from DT */ + tz = thermal_zone_of_sensor_register(&pdev->dev, 0, data, + &bcm2835_thermal_ops); + if (IS_ERR(tz)) { + err = PTR_ERR(tz); + dev_err(&pdev->dev, + "Failed to register the thermal device: %d\n", + err); + goto err_clk; + } + + /* + * right now the FW does set up the HW-block, so we are not + * touching the configuration registers. + * But if the HW is not enabled, then set it up + * using "sane" values used by the firmware right now. + */ + val = readl(data->regs + BCM2835_TS_TSENSCTL); + if (!(val & BCM2835_TS_TSENSCTL_RSTB)) { + int trip_temp, offset, slope; + + slope = thermal_zone_get_slope(tz); + offset = thermal_zone_get_offset(tz); + /* + * For now we deal only with critical, otherwise + * would need to iterate + */ + err = tz->ops->get_trip_temp(tz, 0, &trip_temp); + if (err < 0) { + err = PTR_ERR(tz); + dev_err(&pdev->dev, + "Not able to read trip_temp: %d\n", + err); + goto err_tz; + } + + /* set bandgap reference voltage and enable voltage regulator */ + val = (BCM2835_TS_TSENSCTL_CTRL_DEFAULT << + BCM2835_TS_TSENSCTL_CTRL_SHIFT) | + BCM2835_TS_TSENSCTL_REGULEN; + + /* use the recommended reset duration */ + val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT); + + /* trip_adc value from info */ + val |= bcm2835_thermal_temp2adc(trip_temp, + offset, + slope) + << BCM2835_TS_TSENSCTL_THOLD_SHIFT; + + /* write the value back to the register as 2 steps */ + writel(val, data->regs + BCM2835_TS_TSENSCTL); + val |= BCM2835_TS_TSENSCTL_RSTB; + writel(val, data->regs + BCM2835_TS_TSENSCTL); + } + + data->tz = tz; + + platform_set_drvdata(pdev, tz); + + bcm2835_thermal_debugfs(pdev); + + return 0; +err_tz: + thermal_zone_of_sensor_unregister(&pdev->dev, tz); +err_clk: + clk_disable_unprepare(data->clk); + + return err; +} + +static int bcm2835_thermal_remove(struct platform_device *pdev) +{ + struct thermal_zone_device *tz = platform_get_drvdata(pdev); + struct bcm2835_thermal_data *data = tz->devdata; + + debugfs_remove_recursive(data->debugfsdir); + thermal_zone_of_sensor_unregister(&pdev->dev, tz); + clk_disable_unprepare(data->clk); + + return 0; +} + +static struct platform_driver bcm2835_thermal_driver = { + .probe = bcm2835_thermal_probe, + .remove = bcm2835_thermal_remove, + .driver = { + .name = "bcm2835_thermal", + .of_match_table = bcm2835_thermal_of_match_table, + }, +}; +module_platform_driver(bcm2835_thermal_driver); + +MODULE_AUTHOR("Martin Sperl"); +MODULE_DESCRIPTION("Thermal driver for bcm2835 chip"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/broadcom/ns-thermal.c b/drivers/thermal/broadcom/ns-thermal.c new file mode 100644 index 000000000000..322e741a2463 --- /dev/null +++ b/drivers/thermal/broadcom/ns-thermal.c @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/thermal.h> + +#define PVTMON_CONTROL0 0x00 +#define PVTMON_CONTROL0_SEL_MASK 0x0000000e +#define PVTMON_CONTROL0_SEL_TEMP_MONITOR 0x00000000 +#define PVTMON_CONTROL0_SEL_TEST_MODE 0x0000000e +#define PVTMON_STATUS 0x08 + +struct ns_thermal { + struct thermal_zone_device *tz; + void __iomem *pvtmon; +}; + +static int ns_thermal_get_temp(void *data, int *temp) +{ + struct ns_thermal *ns_thermal = data; + int offset = thermal_zone_get_offset(ns_thermal->tz); + int slope = thermal_zone_get_slope(ns_thermal->tz); + u32 val; + + val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0); + if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) { + /* Clear current mode selection */ + val &= ~PVTMON_CONTROL0_SEL_MASK; + + /* Set temp monitor mode (it's the default actually) */ + val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR; + + writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0); + } + + val = readl(ns_thermal->pvtmon + PVTMON_STATUS); + *temp = slope * val + offset; + + return 0; +} + +static const struct thermal_zone_of_device_ops ns_thermal_ops = { + .get_temp = ns_thermal_get_temp, +}; + +static int ns_thermal_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ns_thermal *ns_thermal; + + ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL); + if (!ns_thermal) + return -ENOMEM; + + ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0); + if (WARN_ON(!ns_thermal->pvtmon)) + return -ENOENT; + + ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0, + ns_thermal, + &ns_thermal_ops); + if (IS_ERR(ns_thermal->tz)) { + iounmap(ns_thermal->pvtmon); + return PTR_ERR(ns_thermal->tz); + } + + platform_set_drvdata(pdev, ns_thermal); + + return 0; +} + +static int ns_thermal_remove(struct platform_device *pdev) +{ + struct ns_thermal *ns_thermal = platform_get_drvdata(pdev); + + iounmap(ns_thermal->pvtmon); + + return 0; +} + +static const struct of_device_id ns_thermal_of_match[] = { + { .compatible = "brcm,ns-thermal", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ns_thermal_of_match); + +static struct platform_driver ns_thermal_driver = { + .probe = ns_thermal_probe, + .remove = ns_thermal_remove, + .driver = { + .name = "ns-thermal", + .of_match_table = ns_thermal_of_match, + }, +}; +module_platform_driver(ns_thermal_driver); + +MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>"); +MODULE_DESCRIPTION("Northstar thermal driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c new file mode 100644 index 000000000000..dd8dd947b7f0 --- /dev/null +++ b/drivers/thermal/da9062-thermal.c @@ -0,0 +1,315 @@ +/* + * Thermal device driver for DA9062 and DA9061 + * Copyright (C) 2017 Dialog Semiconductor + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* When over-temperature is reached, an interrupt from the device will be + * triggered. Following this event the interrupt will be disabled and + * periodic transmission of uevents (HOT trip point) should define the + * first level of temperature supervision. It is expected that any final + * implementation of the thermal driver will include a .notify() function + * to implement these uevents to userspace. + * + * These uevents are intended to indicate non-invasive temperature control + * of the system, where the necessary measures for cooling are the + * responsibility of the host software. Once the temperature falls again, + * the IRQ is re-enabled so the start of a new over-temperature event can + * be detected without constant software monitoring. + */ + +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include <linux/workqueue.h> + +#include <linux/mfd/da9062/core.h> +#include <linux/mfd/da9062/registers.h> + +/* Minimum, maximum and default polling millisecond periods are provided + * here as an example. It is expected that any final implementation to also + * include a modification of these settings to match the required + * application. + */ +#define DA9062_DEFAULT_POLLING_MS_PERIOD 3000 +#define DA9062_MAX_POLLING_MS_PERIOD 10000 +#define DA9062_MIN_POLLING_MS_PERIOD 1000 + +#define DA9062_MILLI_CELSIUS(t) ((t) * 1000) + +struct da9062_thermal_config { + const char *name; +}; + +struct da9062_thermal { + struct da9062 *hw; + struct delayed_work work; + struct thermal_zone_device *zone; + enum thermal_device_mode mode; + struct mutex lock; /* protection for da9062_thermal temperature */ + int temperature; + int irq; + const struct da9062_thermal_config *config; + struct device *dev; +}; + +static void da9062_thermal_poll_on(struct work_struct *work) +{ + struct da9062_thermal *thermal = container_of(work, + struct da9062_thermal, + work.work); + unsigned long delay; + unsigned int val; + int ret; + + /* clear E_TEMP */ + ret = regmap_write(thermal->hw->regmap, + DA9062AA_EVENT_B, + DA9062AA_E_TEMP_MASK); + if (ret < 0) { + dev_err(thermal->dev, + "Cannot clear the TJUNC temperature status\n"); + goto err_enable_irq; + } + + /* Now read E_TEMP again: it is acting like a status bit. + * If over-temperature, then this status will be true. + * If not over-temperature, this status will be false. + */ + ret = regmap_read(thermal->hw->regmap, + DA9062AA_EVENT_B, + &val); + if (ret < 0) { + dev_err(thermal->dev, + "Cannot check the TJUNC temperature status\n"); + goto err_enable_irq; + } + + if (val & DA9062AA_E_TEMP_MASK) { + mutex_lock(&thermal->lock); + thermal->temperature = DA9062_MILLI_CELSIUS(125); + mutex_unlock(&thermal->lock); + thermal_zone_device_update(thermal->zone, + THERMAL_EVENT_UNSPECIFIED); + + delay = msecs_to_jiffies(thermal->zone->passive_delay); + schedule_delayed_work(&thermal->work, delay); + return; + } + + mutex_lock(&thermal->lock); + thermal->temperature = DA9062_MILLI_CELSIUS(0); + mutex_unlock(&thermal->lock); + thermal_zone_device_update(thermal->zone, + THERMAL_EVENT_UNSPECIFIED); + +err_enable_irq: + enable_irq(thermal->irq); +} + +static irqreturn_t da9062_thermal_irq_handler(int irq, void *data) +{ + struct da9062_thermal *thermal = data; + + disable_irq_nosync(thermal->irq); + schedule_delayed_work(&thermal->work, 0); + + return IRQ_HANDLED; +} + +static int da9062_thermal_get_mode(struct thermal_zone_device *z, + enum thermal_device_mode *mode) +{ + struct da9062_thermal *thermal = z->devdata; + *mode = thermal->mode; + return 0; +} + +static int da9062_thermal_get_trip_type(struct thermal_zone_device *z, + int trip, + enum thermal_trip_type *type) +{ + struct da9062_thermal *thermal = z->devdata; + + switch (trip) { + case 0: + *type = THERMAL_TRIP_HOT; + break; + default: + dev_err(thermal->dev, + "Driver does not support more than 1 trip-wire\n"); + return -EINVAL; + } + + return 0; +} + +static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z, + int trip, + int *temp) +{ + struct da9062_thermal *thermal = z->devdata; + + switch (trip) { + case 0: + *temp = DA9062_MILLI_CELSIUS(125); + break; + default: + dev_err(thermal->dev, + "Driver does not support more than 1 trip-wire\n"); + return -EINVAL; + } + + return 0; +} + +static int da9062_thermal_get_temp(struct thermal_zone_device *z, + int *temp) +{ + struct da9062_thermal *thermal = z->devdata; + + mutex_lock(&thermal->lock); + *temp = thermal->temperature; + mutex_unlock(&thermal->lock); + + return 0; +} + +static struct thermal_zone_device_ops da9062_thermal_ops = { + .get_temp = da9062_thermal_get_temp, + .get_mode = da9062_thermal_get_mode, + .get_trip_type = da9062_thermal_get_trip_type, + .get_trip_temp = da9062_thermal_get_trip_temp, +}; + +static const struct da9062_thermal_config da9062_config = { + .name = "da9062-thermal", +}; + +static const struct of_device_id da9062_compatible_reg_id_table[] = { + { .compatible = "dlg,da9062-thermal", .data = &da9062_config }, + { }, +}; + +MODULE_DEVICE_TABLE(of, da9062_compatible_reg_id_table); + +static int da9062_thermal_probe(struct platform_device *pdev) +{ + struct da9062 *chip = dev_get_drvdata(pdev->dev.parent); + struct da9062_thermal *thermal; + unsigned int pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD; + const struct of_device_id *match; + int ret = 0; + + match = of_match_node(da9062_compatible_reg_id_table, + pdev->dev.of_node); + if (!match) + return -ENXIO; + + if (pdev->dev.of_node) { + if (!of_property_read_u32(pdev->dev.of_node, + "polling-delay-passive", + &pp_tmp)) { + if (pp_tmp < DA9062_MIN_POLLING_MS_PERIOD || + pp_tmp > DA9062_MAX_POLLING_MS_PERIOD) { + dev_warn(&pdev->dev, + "Out-of-range polling period %d ms\n", + pp_tmp); + pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD; + } + } + } + + thermal = devm_kzalloc(&pdev->dev, sizeof(struct da9062_thermal), + GFP_KERNEL); + if (!thermal) { + ret = -ENOMEM; + goto err; + } + + thermal->config = match->data; + thermal->hw = chip; + thermal->mode = THERMAL_DEVICE_ENABLED; + thermal->dev = &pdev->dev; + + INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on); + mutex_init(&thermal->lock); + + thermal->zone = thermal_zone_device_register(thermal->config->name, + 1, 0, thermal, + &da9062_thermal_ops, NULL, pp_tmp, + 0); + if (IS_ERR(thermal->zone)) { + dev_err(&pdev->dev, "Cannot register thermal zone device\n"); + ret = PTR_ERR(thermal->zone); + goto err; + } + + dev_dbg(&pdev->dev, + "TJUNC temperature polling period set at %d ms\n", + thermal->zone->passive_delay); + + ret = platform_get_irq_byname(pdev, "THERMAL"); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get platform IRQ.\n"); + goto err_zone; + } + thermal->irq = ret; + + ret = request_threaded_irq(thermal->irq, NULL, + da9062_thermal_irq_handler, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "THERMAL", thermal); + if (ret) { + dev_err(&pdev->dev, + "Failed to request thermal device IRQ.\n"); + goto err_zone; + } + + platform_set_drvdata(pdev, thermal); + return 0; + +err_zone: + thermal_zone_device_unregister(thermal->zone); +err: + return ret; +} + +static int da9062_thermal_remove(struct platform_device *pdev) +{ + struct da9062_thermal *thermal = platform_get_drvdata(pdev); + + free_irq(thermal->irq, thermal); + cancel_delayed_work_sync(&thermal->work); + thermal_zone_device_unregister(thermal->zone); + return 0; +} + +static struct platform_driver da9062_thermal_driver = { + .probe = da9062_thermal_probe, + .remove = da9062_thermal_remove, + .driver = { + .name = "da9062-thermal", + .of_match_table = da9062_compatible_reg_id_table, + }, +}; + +module_platform_driver(da9062_thermal_driver); + +MODULE_AUTHOR("Steve Twiss"); +MODULE_DESCRIPTION("Thermal TJUNC device driver for Dialog DA9062 and DA9061"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9062-thermal"); diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index 4bf4ad58cffd..ef59256887ff 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -28,6 +28,8 @@ #include <trace/events/thermal.h> +#define SCALE_ERROR_MITIGATION 100 + static DEFINE_IDA(devfreq_ida); /** @@ -45,6 +47,12 @@ static DEFINE_IDA(devfreq_ida); * @freq_table_size: Size of the @freq_table and @power_table * @power_ops: Pointer to devfreq_cooling_power, used to generate the * @power_table. + * @res_util: Resource utilization scaling factor for the power. + * It is multiplied by 100 to minimize the error. It is used + * for estimation of the power budget instead of using + * 'utilization' (which is 'busy_time / 'total_time'). + * The 'res_util' range is from 100 to (power_table[state] * 100) + * for the corresponding 'state'. */ struct devfreq_cooling_device { int id; @@ -55,6 +63,8 @@ struct devfreq_cooling_device { u32 *freq_table; size_t freq_table_size; struct devfreq_cooling_power *power_ops; + u32 res_util; + int capped_state; }; /** @@ -164,27 +174,12 @@ freq_get_state(struct devfreq_cooling_device *dfc, unsigned long freq) return THERMAL_CSTATE_INVALID; } -/** - * get_static_power() - calculate the static power - * @dfc: Pointer to devfreq cooling device - * @freq: Frequency in Hz - * - * Calculate the static power in milliwatts using the supplied - * get_static_power(). The current voltage is calculated using the - * OPP library. If no get_static_power() was supplied, assume the - * static power is negligible. - */ -static unsigned long -get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq) +static unsigned long get_voltage(struct devfreq *df, unsigned long freq) { - struct devfreq *df = dfc->devfreq; struct device *dev = df->dev.parent; unsigned long voltage; struct dev_pm_opp *opp; - if (!dfc->power_ops->get_static_power) - return 0; - opp = dev_pm_opp_find_freq_exact(dev, freq, true); if (PTR_ERR(opp) == -ERANGE) opp = dev_pm_opp_find_freq_exact(dev, freq, false); @@ -202,9 +197,35 @@ get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq) dev_err_ratelimited(dev, "Failed to get voltage for frequency %lu\n", freq); - return 0; } + return voltage; +} + +/** + * get_static_power() - calculate the static power + * @dfc: Pointer to devfreq cooling device + * @freq: Frequency in Hz + * + * Calculate the static power in milliwatts using the supplied + * get_static_power(). The current voltage is calculated using the + * OPP library. If no get_static_power() was supplied, assume the + * static power is negligible. + */ +static unsigned long +get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq) +{ + struct devfreq *df = dfc->devfreq; + unsigned long voltage; + + if (!dfc->power_ops->get_static_power) + return 0; + + voltage = get_voltage(df, freq); + + if (voltage == 0) + return 0; + return dfc->power_ops->get_static_power(df, voltage); } @@ -239,6 +260,16 @@ get_dynamic_power(struct devfreq_cooling_device *dfc, unsigned long freq, return power; } + +static inline unsigned long get_total_power(struct devfreq_cooling_device *dfc, + unsigned long freq, + unsigned long voltage) +{ + return get_static_power(dfc, freq) + get_dynamic_power(dfc, freq, + voltage); +} + + static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cdev, struct thermal_zone_device *tz, u32 *power) @@ -248,27 +279,55 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd struct devfreq_dev_status *status = &df->last_status; unsigned long state; unsigned long freq = status->current_frequency; - u32 dyn_power, static_power; + unsigned long voltage; + u32 dyn_power = 0; + u32 static_power = 0; + int res; - /* Get dynamic power for state */ state = freq_get_state(dfc, freq); - if (state == THERMAL_CSTATE_INVALID) - return -EAGAIN; + if (state == THERMAL_CSTATE_INVALID) { + res = -EAGAIN; + goto fail; + } - dyn_power = dfc->power_table[state]; + if (dfc->power_ops->get_real_power) { + voltage = get_voltage(df, freq); + if (voltage == 0) { + res = -EINVAL; + goto fail; + } - /* Scale dynamic power for utilization */ - dyn_power = (dyn_power * status->busy_time) / status->total_time; + res = dfc->power_ops->get_real_power(df, power, freq, voltage); + if (!res) { + state = dfc->capped_state; + dfc->res_util = dfc->power_table[state]; + dfc->res_util *= SCALE_ERROR_MITIGATION; - /* Get static power */ - static_power = get_static_power(dfc, freq); + if (*power > 1) + dfc->res_util /= *power; + } else { + goto fail; + } + } else { + dyn_power = dfc->power_table[state]; - trace_thermal_power_devfreq_get_power(cdev, status, freq, dyn_power, - static_power); + /* Scale dynamic power for utilization */ + dyn_power *= status->busy_time; + dyn_power /= status->total_time; + /* Get static power */ + static_power = get_static_power(dfc, freq); - *power = dyn_power + static_power; + *power = dyn_power + static_power; + } + + trace_thermal_power_devfreq_get_power(cdev, status, freq, dyn_power, + static_power, *power); return 0; +fail: + /* It is safe to set max in this case */ + dfc->res_util = SCALE_ERROR_MITIGATION; + return res; } static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev, @@ -301,26 +360,34 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev, unsigned long busy_time; s32 dyn_power; u32 static_power; + s32 est_power; int i; - static_power = get_static_power(dfc, freq); + if (dfc->power_ops->get_real_power) { + /* Scale for resource utilization */ + est_power = power * dfc->res_util; + est_power /= SCALE_ERROR_MITIGATION; + } else { + static_power = get_static_power(dfc, freq); - dyn_power = power - static_power; - dyn_power = dyn_power > 0 ? dyn_power : 0; + dyn_power = power - static_power; + dyn_power = dyn_power > 0 ? dyn_power : 0; - /* Scale dynamic power for utilization */ - busy_time = status->busy_time ?: 1; - dyn_power = (dyn_power * status->total_time) / busy_time; + /* Scale dynamic power for utilization */ + busy_time = status->busy_time ?: 1; + est_power = (dyn_power * status->total_time) / busy_time; + } /* * Find the first cooling state that is within the power * budget for dynamic power. */ for (i = 0; i < dfc->freq_table_size - 1; i++) - if (dyn_power >= dfc->power_table[i]) + if (est_power >= dfc->power_table[i]) break; *state = i; + dfc->capped_state = i; trace_thermal_power_devfreq_limit(cdev, freq, *state, power); return 0; } @@ -376,7 +443,7 @@ static int devfreq_cooling_gen_tables(struct devfreq_cooling_device *dfc) } for (i = 0, freq = ULONG_MAX; i < num_opps; i++, freq--) { - unsigned long power_dyn, voltage; + unsigned long power, voltage; struct dev_pm_opp *opp; opp = dev_pm_opp_find_freq_floor(dev, &freq); @@ -389,12 +456,15 @@ static int devfreq_cooling_gen_tables(struct devfreq_cooling_device *dfc) dev_pm_opp_put(opp); if (dfc->power_ops) { - power_dyn = get_dynamic_power(dfc, freq, voltage); + if (dfc->power_ops->get_real_power) + power = get_total_power(dfc, freq, voltage); + else + power = get_dynamic_power(dfc, freq, voltage); - dev_dbg(dev, "Dynamic power table: %lu MHz @ %lu mV: %lu = %lu mW\n", - freq / 1000000, voltage, power_dyn, power_dyn); + dev_dbg(dev, "Power table: %lu MHz @ %lu mV: %lu = %lu mW\n", + freq / 1000000, voltage, power, power); - power_table[i] = power_dyn; + power_table[i] = power; } freq_table[i] = freq; diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c index b2bbaa1c60b0..c27868b2c6af 100644 --- a/drivers/thermal/intel_soc_dts_thermal.c +++ b/drivers/thermal/intel_soc_dts_thermal.c @@ -73,8 +73,12 @@ static int __init intel_soc_thermal_init(void) IRQF_TRIGGER_RISING | IRQF_ONESHOT, "soc_dts", soc_dts); if (err) { - pr_err("request_threaded_irq ret %d\n", err); - goto error_irq; + /* + * Do not just error out because the user space thermal + * daemon such as DPTF may use polling instead of being + * interrupt driven. + */ + pr_warn("request_threaded_irq ret %d\n", err); } } @@ -88,7 +92,6 @@ static int __init intel_soc_thermal_init(void) error_trips: if (soc_dts_thres_irq) free_irq(soc_dts_thres_irq, soc_dts); -error_irq: intel_soc_dts_iosf_exit(soc_dts); return err; diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 1aff7fde54b1..7737f14846f9 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -191,7 +191,7 @@ static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { }; static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { - TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2 + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 }; static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index d33c845244b1..37fcefd06d9f 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -20,12 +20,14 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/mutex.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/spinlock.h> #include <linux/thermal.h> +#include "thermal_core.h" + /* Register offsets */ #define REG_GEN3_IRQSTR 0x04 #define REG_GEN3_IRQMSK 0x08 @@ -41,6 +43,14 @@ #define REG_GEN3_THCODE2 0x54 #define REG_GEN3_THCODE3 0x58 +/* IRQ{STR,MSK,EN} bits */ +#define IRQ_TEMP1 BIT(0) +#define IRQ_TEMP2 BIT(1) +#define IRQ_TEMP3 BIT(2) +#define IRQ_TEMPD1 BIT(3) +#define IRQ_TEMPD2 BIT(4) +#define IRQ_TEMPD3 BIT(5) + /* CTSR bits */ #define CTSR_PONM BIT(8) #define CTSR_AOUT BIT(7) @@ -72,11 +82,15 @@ struct rcar_gen3_thermal_tsc { void __iomem *base; struct thermal_zone_device *zone; struct equation_coefs coef; - struct mutex lock; + int low; + int high; }; struct rcar_gen3_thermal_priv { struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM]; + unsigned int num_tscs; + spinlock_t lock; /* Protect interrupts on and off */ + const struct rcar_gen3_thermal_data *data; }; struct rcar_gen3_thermal_data { @@ -114,6 +128,7 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc, #define FIXPT_SHIFT 7 #define FIXPT_INT(_x) ((_x) << FIXPT_SHIFT) +#define INT_FIXPT(_x) ((_x) >> FIXPT_SHIFT) #define FIXPT_DIV(_a, _b) DIV_ROUND_CLOSEST(((_a) << FIXPT_SHIFT), (_b)) #define FIXPT_TO_MCELSIUS(_x) ((_x) * 1000 >> FIXPT_SHIFT) @@ -163,16 +178,12 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp) u32 reg; /* Read register and convert to mili Celsius */ - mutex_lock(&tsc->lock); - reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; val1 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1, tsc->coef.a1); val2 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2, tsc->coef.a2); mcelsius = FIXPT_TO_MCELSIUS((val1 + val2) / 2); - mutex_unlock(&tsc->lock); - /* Make sure we are inside specifications */ if ((mcelsius < MCELSIUS(-40)) || (mcelsius > MCELSIUS(125))) return -EIO; @@ -183,10 +194,90 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp) return 0; } +static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc, + int mcelsius) +{ + int celsius, val1, val2; + + celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); + val1 = celsius * tsc->coef.a1 + tsc->coef.b1; + val2 = celsius * tsc->coef.a2 + tsc->coef.b2; + + return INT_FIXPT((val1 + val2) / 2); +} + +static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high) +{ + struct rcar_gen3_thermal_tsc *tsc = devdata; + + low = clamp_val(low, -40000, 125000); + high = clamp_val(high, -40000, 125000); + + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, + rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); + + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, + rcar_gen3_thermal_mcelsius_to_temp(tsc, high)); + + tsc->low = low; + tsc->high = high; + + return 0; +} + static struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = { .get_temp = rcar_gen3_thermal_get_temp, + .set_trips = rcar_gen3_thermal_set_trips, }; +static void rcar_thermal_irq_set(struct rcar_gen3_thermal_priv *priv, bool on) +{ + unsigned int i; + u32 val = on ? IRQ_TEMPD1 | IRQ_TEMP2 : 0; + + for (i = 0; i < priv->num_tscs; i++) + rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQMSK, val); +} + +static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data) +{ + struct rcar_gen3_thermal_priv *priv = data; + u32 status; + int i, ret = IRQ_HANDLED; + + spin_lock(&priv->lock); + for (i = 0; i < priv->num_tscs; i++) { + status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR); + rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0); + if (status) + ret = IRQ_WAKE_THREAD; + } + + if (ret == IRQ_WAKE_THREAD) + rcar_thermal_irq_set(priv, false); + + spin_unlock(&priv->lock); + + return ret; +} + +static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, void *data) +{ + struct rcar_gen3_thermal_priv *priv = data; + unsigned long flags; + int i; + + for (i = 0; i < priv->num_tscs; i++) + thermal_zone_device_update(priv->tscs[i]->zone, + THERMAL_EVENT_UNSPECIFIED); + + spin_lock_irqsave(&priv->lock, flags); + rcar_thermal_irq_set(priv, true); + spin_unlock_irqrestore(&priv->lock, flags); + + return IRQ_HANDLED; +} + static void r8a7795_thermal_init(struct rcar_gen3_thermal_tsc *tsc) { rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_THBGR); @@ -195,7 +286,11 @@ static void r8a7795_thermal_init(struct rcar_gen3_thermal_tsc *tsc) usleep_range(1000, 2000); rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_PONM); + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F); + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0); + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2); + rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN); @@ -219,9 +314,14 @@ static void r8a7796_thermal_init(struct rcar_gen3_thermal_tsc *tsc) usleep_range(1000, 2000); rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F); + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0); + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2); + reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR); reg_val |= THCTR_THSST; rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val); + + usleep_range(1000, 2000); } static const struct rcar_gen3_thermal_data r8a7795_data = { @@ -255,9 +355,8 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct resource *res; struct thermal_zone_device *zone; - int ret, i; - const struct rcar_gen3_thermal_data *match_data = - of_device_get_match_data(dev); + int ret, irq, i; + char *irqname; /* default values if FUSEs are missing */ /* TODO: Read values from hardware on supported platforms */ @@ -272,24 +371,50 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; + priv->data = of_device_get_match_data(dev); + + spin_lock_init(&priv->lock); + platform_set_drvdata(pdev, priv); + /* + * Request 2 (of the 3 possible) IRQs, the driver only needs to + * to trigger on the low and high trip points of the current + * temp window at this point. + */ + for (i = 0; i < 2; i++) { + irq = platform_get_irq(pdev, i); + if (irq < 0) + return irq; + + irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d", + dev_name(dev), i); + if (!irqname) + return -ENOMEM; + + ret = devm_request_threaded_irq(dev, irq, rcar_gen3_thermal_irq, + rcar_gen3_thermal_irq_thread, + IRQF_SHARED, irqname, priv); + if (ret) + return ret; + } + pm_runtime_enable(dev); pm_runtime_get_sync(dev); for (i = 0; i < TSC_MAX_NUM; i++) { struct rcar_gen3_thermal_tsc *tsc; + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) + break; + tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL); if (!tsc) { ret = -ENOMEM; goto error_unregister; } - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (!res) - break; - tsc->base = devm_ioremap_resource(dev, res); if (IS_ERR(tsc->base)) { ret = PTR_ERR(tsc->base); @@ -297,9 +422,8 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) } priv->tscs[i] = tsc; - mutex_init(&tsc->lock); - match_data->thermal_init(tsc); + priv->data->thermal_init(tsc); rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]); zone = devm_thermal_zone_of_sensor_register(dev, i, tsc, @@ -310,8 +434,23 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) goto error_unregister; } tsc->zone = zone; + + ret = of_thermal_get_ntrips(tsc->zone); + if (ret < 0) + goto error_unregister; + + dev_info(dev, "TSC%d: Loaded %d trip points\n", i, ret); } + priv->num_tscs = i; + + if (!priv->num_tscs) { + ret = -ENODEV; + goto error_unregister; + } + + rcar_thermal_irq_set(priv, true); + return 0; error_unregister: @@ -320,9 +459,39 @@ error_unregister: return ret; } +static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev) +{ + struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev); + + rcar_thermal_irq_set(priv, false); + + return 0; +} + +static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev) +{ + struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev); + unsigned int i; + + for (i = 0; i < priv->num_tscs; i++) { + struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; + + priv->data->thermal_init(tsc); + rcar_gen3_thermal_set_trips(tsc, tsc->low, tsc->high); + } + + rcar_thermal_irq_set(priv, true); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, rcar_gen3_thermal_suspend, + rcar_gen3_thermal_resume); + static struct platform_driver rcar_gen3_thermal_driver = { .driver = { .name = "rcar_gen3_thermal", + .pm = &rcar_gen3_thermal_pm_ops, .of_match_table = rcar_gen3_thermal_dt_ids, }, .probe = rcar_gen3_thermal_probe, diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 11f0675cb7e5..b21b9cc2c8d6 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -45,8 +45,10 @@ static LIST_HEAD(thermal_governor_list); static DEFINE_MUTEX(thermal_list_lock); static DEFINE_MUTEX(thermal_governor_lock); +static DEFINE_MUTEX(poweroff_lock); static atomic_t in_suspend; +static bool power_off_triggered; static struct thermal_governor *def_governor; @@ -322,6 +324,54 @@ static void handle_non_critical_trips(struct thermal_zone_device *tz, def_governor->throttle(tz, trip); } +/** + * thermal_emergency_poweroff_func - emergency poweroff work after a known delay + * @work: work_struct associated with the emergency poweroff function + * + * This function is called in very critical situations to force + * a kernel poweroff after a configurable timeout value. + */ +static void thermal_emergency_poweroff_func(struct work_struct *work) +{ + /* + * We have reached here after the emergency thermal shutdown + * Waiting period has expired. This means orderly_poweroff has + * not been able to shut off the system for some reason. + * Try to shut down the system immediately using kernel_power_off + * if populated + */ + WARN(1, "Attempting kernel_power_off: Temperature too high\n"); + kernel_power_off(); + + /* + * Worst of the worst case trigger emergency restart + */ + WARN(1, "Attempting emergency_restart: Temperature too high\n"); + emergency_restart(); +} + +static DECLARE_DELAYED_WORK(thermal_emergency_poweroff_work, + thermal_emergency_poweroff_func); + +/** + * thermal_emergency_poweroff - Trigger an emergency system poweroff + * + * This may be called from any critical situation to trigger a system shutdown + * after a known period of time. By default this is not scheduled. + */ +void thermal_emergency_poweroff(void) +{ + int poweroff_delay_ms = CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS; + /* + * poweroff_delay_ms must be a carefully profiled positive value. + * Its a must for thermal_emergency_poweroff_work to be scheduled + */ + if (poweroff_delay_ms <= 0) + return; + schedule_delayed_work(&thermal_emergency_poweroff_work, + msecs_to_jiffies(poweroff_delay_ms)); +} + static void handle_critical_trips(struct thermal_zone_device *tz, int trip, enum thermal_trip_type trip_type) { @@ -342,7 +392,17 @@ static void handle_critical_trips(struct thermal_zone_device *tz, dev_emerg(&tz->device, "critical temperature reached(%d C),shutting down\n", tz->temperature / 1000); - orderly_poweroff(true); + mutex_lock(&poweroff_lock); + if (!power_off_triggered) { + /* + * Queue a backup emergency shutdown in the event of + * orderly_poweroff failure + */ + thermal_emergency_poweroff(); + orderly_poweroff(true); + power_off_triggered = true; + } + mutex_unlock(&poweroff_lock); } } @@ -1463,6 +1523,7 @@ static int __init thermal_init(void) { int result; + mutex_init(&poweroff_lock); result = thermal_register_governors(); if (result) goto error; @@ -1497,6 +1558,7 @@ error: ida_destroy(&thermal_cdev_ida); mutex_destroy(&thermal_list_lock); mutex_destroy(&thermal_governor_lock); + mutex_destroy(&poweroff_lock); return result; } diff --git a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c index 118d7d847715..4167373327d9 100644 --- a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c @@ -410,8 +410,6 @@ const struct ti_bandgap_data dra752_data = { .domain = "cpu", .register_cooling = ti_thermal_register_cpu_cooling, .unregister_cooling = ti_thermal_unregister_cpu_cooling, - .slope = DRA752_GRADIENT_SLOPE, - .constant = DRA752_GRADIENT_CONST, .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, }, @@ -419,8 +417,6 @@ const struct ti_bandgap_data dra752_data = { .registers = &dra752_gpu_temp_sensor_registers, .ts_data = &dra752_gpu_temp_sensor_data, .domain = "gpu", - .slope = DRA752_GRADIENT_SLOPE, - .constant = DRA752_GRADIENT_CONST, .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, }, @@ -428,8 +424,6 @@ const struct ti_bandgap_data dra752_data = { .registers = &dra752_core_temp_sensor_registers, .ts_data = &dra752_core_temp_sensor_data, .domain = "core", - .slope = DRA752_GRADIENT_SLOPE, - .constant = DRA752_GRADIENT_CONST, .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, }, @@ -437,8 +431,6 @@ const struct ti_bandgap_data dra752_data = { .registers = &dra752_dspeve_temp_sensor_registers, .ts_data = &dra752_dspeve_temp_sensor_data, .domain = "dspeve", - .slope = DRA752_GRADIENT_SLOPE, - .constant = DRA752_GRADIENT_CONST, .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, }, @@ -446,8 +438,6 @@ const struct ti_bandgap_data dra752_data = { .registers = &dra752_iva_temp_sensor_registers, .ts_data = &dra752_iva_temp_sensor_data, .domain = "iva", - .slope = DRA752_GRADIENT_SLOPE, - .constant = DRA752_GRADIENT_CONST, .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, }, diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c index 3ee34340edab..c6d217913dd1 100644 --- a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c @@ -91,8 +91,6 @@ const struct ti_bandgap_data omap34xx_data = { .registers = &omap34xx_mpu_temp_sensor_registers, .ts_data = &omap34xx_mpu_temp_sensor_data, .domain = "cpu", - .slope = 0, - .constant = 20000, .slope_pcb = 0, .constant_pcb = 20000, .register_cooling = NULL, @@ -164,8 +162,6 @@ const struct ti_bandgap_data omap36xx_data = { .registers = &omap36xx_mpu_temp_sensor_registers, .ts_data = &omap36xx_mpu_temp_sensor_data, .domain = "cpu", - .slope = 0, - .constant = 20000, .slope_pcb = 0, .constant_pcb = 20000, .register_cooling = NULL, diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c index d255d33da9eb..fd1113360603 100644 --- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c @@ -82,8 +82,6 @@ const struct ti_bandgap_data omap4430_data = { .registers = &omap4430_mpu_temp_sensor_registers, .ts_data = &omap4430_mpu_temp_sensor_data, .domain = "cpu", - .slope = OMAP_GRADIENT_SLOPE_4430, - .constant = OMAP_GRADIENT_CONST_4430, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4430, .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4430, .register_cooling = ti_thermal_register_cpu_cooling, @@ -222,8 +220,6 @@ const struct ti_bandgap_data omap4460_data = { .registers = &omap4460_mpu_temp_sensor_registers, .ts_data = &omap4460_mpu_temp_sensor_data, .domain = "cpu", - .slope = OMAP_GRADIENT_SLOPE_4460, - .constant = OMAP_GRADIENT_CONST_4460, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4460, .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4460, .register_cooling = ti_thermal_register_cpu_cooling, @@ -255,8 +251,6 @@ const struct ti_bandgap_data omap4470_data = { .registers = &omap4460_mpu_temp_sensor_registers, .ts_data = &omap4460_mpu_temp_sensor_data, .domain = "cpu", - .slope = OMAP_GRADIENT_SLOPE_4470, - .constant = OMAP_GRADIENT_CONST_4470, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4470, .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4470, .register_cooling = ti_thermal_register_cpu_cooling, diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c index 79ff70c446ba..cd9a304fb571 100644 --- a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c @@ -336,8 +336,6 @@ const struct ti_bandgap_data omap5430_data = { .domain = "cpu", .register_cooling = ti_thermal_register_cpu_cooling, .unregister_cooling = ti_thermal_unregister_cpu_cooling, - .slope = OMAP_GRADIENT_SLOPE_5430_CPU, - .constant = OMAP_GRADIENT_CONST_5430_CPU, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU, .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_5430_CPU, }, @@ -345,8 +343,6 @@ const struct ti_bandgap_data omap5430_data = { .registers = &omap5430_gpu_temp_sensor_registers, .ts_data = &omap5430_gpu_temp_sensor_data, .domain = "gpu", - .slope = OMAP_GRADIENT_SLOPE_5430_GPU, - .constant = OMAP_GRADIENT_CONST_5430_GPU, .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU, .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_5430_GPU, }, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index fe0adb898764..209c664c2823 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -254,8 +254,6 @@ struct ti_bandgap { * @ts_data: pointer to struct with thresholds, limits of temperature sensor * @registers: pointer to the list of register offsets and bitfields * @domain: the name of the domain where the sensor is located - * @slope: sensor gradient slope info for hotspot extrapolation equation - * @constant: sensor gradient const info for hotspot extrapolation equation * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation * with no external influence * @constant_pcb: sensor gradient const info for hotspot extrapolation equation @@ -274,8 +272,6 @@ struct ti_temp_sensor { struct temp_sensor_registers *registers; char *domain; /* for hotspot extrapolation */ - const int slope; - const int constant; const int slope_pcb; const int constant_pcb; int (*register_cooling)(struct ti_bandgap *bgp, int id); diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 0586bd0f2bab..02790f69e26c 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -96,8 +96,8 @@ static inline int __ti_thermal_get_temp(void *devdata, int *temp) return ret; /* Default constants */ - slope = s->slope; - constant = s->constant; + slope = thermal_zone_get_slope(data->ti_thermal); + constant = thermal_zone_get_offset(data->ti_thermal); pcb_tz = data->pcb_tz; /* In case pcb zone is available, use the extrapolation rule with it */ @@ -126,119 +126,6 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, return __ti_thermal_get_temp(data, temp); } -/* Bind callback functions for thermal zone */ -static int ti_thermal_bind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - struct ti_thermal_data *data = thermal->devdata; - int id; - - if (!data || IS_ERR(data)) - return -ENODEV; - - /* check if this is the cooling device we registered */ - if (data->cool_dev != cdev) - return 0; - - id = data->sensor_id; - - /* Simple thing, two trips, one passive another critical */ - return thermal_zone_bind_cooling_device(thermal, 0, cdev, - /* bind with min and max states defined by cpu_cooling */ - THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT, - THERMAL_WEIGHT_DEFAULT); -} - -/* Unbind callback functions for thermal zone */ -static int ti_thermal_unbind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - struct ti_thermal_data *data = thermal->devdata; - - if (!data || IS_ERR(data)) - return -ENODEV; - - /* check if this is the cooling device we registered */ - if (data->cool_dev != cdev) - return 0; - - /* Simple thing, two trips, one passive another critical */ - return thermal_zone_unbind_cooling_device(thermal, 0, cdev); -} - -/* Get mode callback functions for thermal zone */ -static int ti_thermal_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) -{ - struct ti_thermal_data *data = thermal->devdata; - - if (data) - *mode = data->mode; - - return 0; -} - -/* Set mode callback functions for thermal zone */ -static int ti_thermal_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) -{ - struct ti_thermal_data *data = thermal->devdata; - struct ti_bandgap *bgp; - - bgp = data->bgp; - - if (!data->ti_thermal) { - dev_notice(&thermal->device, "thermal zone not registered\n"); - return 0; - } - - mutex_lock(&data->ti_thermal->lock); - - if (mode == THERMAL_DEVICE_ENABLED) - data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; - else - data->ti_thermal->polling_delay = 0; - - mutex_unlock(&data->ti_thermal->lock); - - data->mode = mode; - ti_bandgap_write_update_interval(bgp, data->sensor_id, - data->ti_thermal->polling_delay); - thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); - dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", - data->ti_thermal->polling_delay); - - return 0; -} - -/* Get trip type callback functions for thermal zone */ -static int ti_thermal_get_trip_type(struct thermal_zone_device *thermal, - int trip, enum thermal_trip_type *type) -{ - if (!ti_thermal_is_valid_trip(trip)) - return -EINVAL; - - if (trip + 1 == OMAP_TRIP_NUMBER) - *type = THERMAL_TRIP_CRITICAL; - else - *type = THERMAL_TRIP_PASSIVE; - - return 0; -} - -/* Get trip temperature callback functions for thermal zone */ -static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal, - int trip, int *temp) -{ - if (!ti_thermal_is_valid_trip(trip)) - return -EINVAL; - - *temp = ti_thermal_get_trip_value(trip); - - return 0; -} - static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend) { struct ti_thermal_data *data = p; @@ -262,38 +149,11 @@ static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend) return 0; } -/* Get the temperature trend callback functions for thermal zone */ -static int ti_thermal_get_trend(struct thermal_zone_device *thermal, - int trip, enum thermal_trend *trend) -{ - return __ti_thermal_get_trend(thermal->devdata, trip, trend); -} - -/* Get critical temperature callback functions for thermal zone */ -static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal, - int *temp) -{ - /* shutdown zone */ - return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp); -} - static const struct thermal_zone_of_device_ops ti_of_thermal_ops = { .get_temp = __ti_thermal_get_temp, .get_trend = __ti_thermal_get_trend, }; -static struct thermal_zone_device_ops ti_thermal_ops = { - .get_temp = ti_thermal_get_temp, - .get_trend = ti_thermal_get_trend, - .bind = ti_thermal_bind, - .unbind = ti_thermal_unbind, - .get_mode = ti_thermal_get_mode, - .set_mode = ti_thermal_set_mode, - .get_trip_type = ti_thermal_get_trip_type, - .get_trip_temp = ti_thermal_get_trip_temp, - .get_crit_temp = ti_thermal_get_crit_temp, -}; - static struct ti_thermal_data *ti_thermal_build_data(struct ti_bandgap *bgp, int id) { @@ -331,18 +191,10 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, data->ti_thermal = devm_thermal_zone_of_sensor_register(bgp->dev, id, data, &ti_of_thermal_ops); if (IS_ERR(data->ti_thermal)) { - /* Create thermal zone */ - data->ti_thermal = thermal_zone_device_register(domain, - OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops, - NULL, FAST_TEMP_MONITORING_RATE, - FAST_TEMP_MONITORING_RATE); - if (IS_ERR(data->ti_thermal)) { - dev_err(bgp->dev, "thermal zone device is NULL\n"); - return PTR_ERR(data->ti_thermal); - } - data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; - data->our_zone = true; + dev_err(bgp->dev, "thermal zone device is NULL\n"); + return PTR_ERR(data->ti_thermal); } + ti_bandgap_set_sensor_data(bgp, id, data); ti_bandgap_write_update_interval(bgp, data->sensor_id, data->ti_thermal->polling_delay); diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal.h b/drivers/thermal/ti-soc-thermal/ti-thermal.h index f8b7ffea6194..8e85ca973967 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal.h +++ b/drivers/thermal/ti-soc-thermal/ti-thermal.h @@ -25,22 +25,6 @@ #include "ti-bandgap.h" -/* sensors gradient and offsets */ -#define OMAP_GRADIENT_SLOPE_4430 0 -#define OMAP_GRADIENT_CONST_4430 20000 -#define OMAP_GRADIENT_SLOPE_4460 348 -#define OMAP_GRADIENT_CONST_4460 -9301 -#define OMAP_GRADIENT_SLOPE_4470 308 -#define OMAP_GRADIENT_CONST_4470 -7896 - -#define OMAP_GRADIENT_SLOPE_5430_CPU 65 -#define OMAP_GRADIENT_CONST_5430_CPU -1791 -#define OMAP_GRADIENT_SLOPE_5430_GPU 117 -#define OMAP_GRADIENT_CONST_5430_GPU -2992 - -#define DRA752_GRADIENT_SLOPE 0 -#define DRA752_GRADIENT_CONST 2000 - /* PCB sensor calculation constants */ #define OMAP_GRADIENT_SLOPE_W_PCB_4430 0 #define OMAP_GRADIENT_CONST_W_PCB_4430 20000 diff --git a/include/linux/devfreq_cooling.h b/include/linux/devfreq_cooling.h index c35d0c0e0ada..4635f95000a4 100644 --- a/include/linux/devfreq_cooling.h +++ b/include/linux/devfreq_cooling.h @@ -34,6 +34,23 @@ * If get_dynamic_power() is NULL, then the * dynamic power is calculated as * @dyn_power_coeff * frequency * voltage^2 + * @get_real_power: When this is set, the framework uses it to ask the + * device driver for the actual power. + * Some devices have more sophisticated methods + * (like power counters) to approximate the actual power + * that they use. + * This function provides more accurate data to the + * thermal governor. When the driver does not provide + * such function, framework just uses pre-calculated + * table and scale the power by 'utilization' + * (based on 'busy_time' and 'total_time' taken from + * devfreq 'last_status'). + * The value returned by this function must be lower + * or equal than the maximum power value + * for the current state + * (which can be found in power_table[state]). + * When this interface is used, the power_table holds + * max total (static + dynamic) power value for each OPP. */ struct devfreq_cooling_power { unsigned long (*get_static_power)(struct devfreq *devfreq, @@ -41,6 +58,8 @@ struct devfreq_cooling_power { unsigned long (*get_dynamic_power)(struct devfreq *devfreq, unsigned long freq, unsigned long voltage); + int (*get_real_power)(struct devfreq *df, u32 *power, + unsigned long freq, unsigned long voltage); unsigned long dyn_power_coeff; }; diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h index 2b4a8ff72d0d..6cde5b3514c2 100644 --- a/include/trace/events/thermal.h +++ b/include/trace/events/thermal.h @@ -151,9 +151,9 @@ TRACE_EVENT(thermal_power_cpu_limit, TRACE_EVENT(thermal_power_devfreq_get_power, TP_PROTO(struct thermal_cooling_device *cdev, struct devfreq_dev_status *status, unsigned long freq, - u32 dynamic_power, u32 static_power), + u32 dynamic_power, u32 static_power, u32 power), - TP_ARGS(cdev, status, freq, dynamic_power, static_power), + TP_ARGS(cdev, status, freq, dynamic_power, static_power, power), TP_STRUCT__entry( __string(type, cdev->type ) @@ -161,6 +161,7 @@ TRACE_EVENT(thermal_power_devfreq_get_power, __field(u32, load ) __field(u32, dynamic_power ) __field(u32, static_power ) + __field(u32, power) ), TP_fast_assign( @@ -169,11 +170,13 @@ TRACE_EVENT(thermal_power_devfreq_get_power, __entry->load = (100 * status->busy_time) / status->total_time; __entry->dynamic_power = dynamic_power; __entry->static_power = static_power; + __entry->power = power; ), - TP_printk("type=%s freq=%lu load=%u dynamic_power=%u static_power=%u", + TP_printk("type=%s freq=%lu load=%u dynamic_power=%u static_power=%u power=%u", __get_str(type), __entry->freq, - __entry->load, __entry->dynamic_power, __entry->static_power) + __entry->load, __entry->dynamic_power, __entry->static_power, + __entry->power) ); TRACE_EVENT(thermal_power_devfreq_limit, |