diff options
-rw-r--r-- | drivers/net/phy/micrel.c | 93 | ||||
-rw-r--r-- | include/linux/micrel_phy.h | 1 |
2 files changed, 50 insertions, 44 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index a0e944099020..d2e790cd3651 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -57,7 +57,7 @@ #define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9) #define KSZ9021_CTRL_INT_ACTIVE_HIGH BIT(14) #define KS8737_CTRL_INT_ACTIVE_HIGH BIT(14) -#define KSZ8051_RMII_50MHZ_CLK BIT(7) +#define KSZPHY_RMII_REF_CLK_SEL BIT(7) /* Write/read to/from extended registers */ #define MII_KSZPHY_EXTREG 0x0b @@ -76,15 +76,19 @@ struct kszphy_type { u32 led_mode_reg; bool has_broadcast_disable; + bool has_rmii_ref_clk_sel; }; struct kszphy_priv { const struct kszphy_type *type; int led_mode; + bool rmii_ref_clk_sel; + bool rmii_ref_clk_sel_val; }; static const struct kszphy_type ksz8021_type = { .led_mode_reg = MII_KSZPHY_CTRL_2, + .has_rmii_ref_clk_sel = true, }; static const struct kszphy_type ksz8041_type = { @@ -100,21 +104,6 @@ static const struct kszphy_type ksz8081_type = { .has_broadcast_disable = true, }; -static int ksz_config_flags(struct phy_device *phydev) -{ - int regval; - - if (phydev->dev_flags & (MICREL_PHY_50MHZ_CLK | MICREL_PHY_25MHZ_CLK)) { - regval = phy_read(phydev, MII_KSZPHY_CTRL); - if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) - regval |= KSZ8051_RMII_50MHZ_CLK; - else - regval &= ~KSZ8051_RMII_50MHZ_CLK; - return phy_write(phydev, MII_KSZPHY_CTRL, regval); - } - return 0; -} - static int kszphy_extended_write(struct phy_device *phydev, u32 regnum, u16 val) { @@ -189,6 +178,22 @@ static int ks8737_config_intr(struct phy_device *phydev) return rc < 0 ? rc : 0; } +static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val) +{ + int ctrl; + + ctrl = phy_read(phydev, MII_KSZPHY_CTRL); + if (ctrl < 0) + return ctrl; + + if (val) + ctrl |= KSZPHY_RMII_REF_CLK_SEL; + else + ctrl &= ~KSZPHY_RMII_REF_CLK_SEL; + + return phy_write(phydev, MII_KSZPHY_CTRL, ctrl); +} + static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val) { int rc, temp, shift; @@ -243,6 +248,7 @@ static int kszphy_config_init(struct phy_device *phydev) { struct kszphy_priv *priv = phydev->priv; const struct kszphy_type *type; + int ret; if (!priv) return 0; @@ -252,6 +258,14 @@ static int kszphy_config_init(struct phy_device *phydev) if (type->has_broadcast_disable) kszphy_broadcast_disable(phydev); + if (priv->rmii_ref_clk_sel) { + ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val); + if (ret) { + dev_err(&phydev->dev, "failed to set rmii reference clock\n"); + return ret; + } + } + if (priv->led_mode >= 0) kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode); @@ -262,10 +276,8 @@ static int ksz8021_config_init(struct phy_device *phydev) { int rc; - kszphy_config_init(phydev); - - rc = ksz_config_flags(phydev); - if (rc < 0) + rc = kszphy_config_init(phydev); + if (rc) return rc; rc = kszphy_broadcast_disable(phydev); @@ -273,16 +285,6 @@ static int ksz8021_config_init(struct phy_device *phydev) return rc < 0 ? rc : 0; } -static int ks8051_config_init(struct phy_device *phydev) -{ - int rc; - - kszphy_config_init(phydev); - - rc = ksz_config_flags(phydev); - return rc < 0 ? rc : 0; -} - static int ksz9021_load_values_from_of(struct phy_device *phydev, struct device_node *of_node, u16 reg, char *field1, char *field2, @@ -517,6 +519,7 @@ static int kszphy_probe(struct phy_device *phydev) const struct kszphy_type *type = phydev->drv->driver_data; struct device_node *np = phydev->dev.of_node; struct kszphy_priv *priv; + struct clk *clk; int ret; priv = devm_kzalloc(&phydev->dev, sizeof(*priv), GFP_KERNEL); @@ -542,28 +545,32 @@ static int kszphy_probe(struct phy_device *phydev) priv->led_mode = -1; } - return 0; -} - -static int ksz8021_probe(struct phy_device *phydev) -{ - struct clk *clk; - clk = devm_clk_get(&phydev->dev, "rmii-ref"); if (!IS_ERR(clk)) { unsigned long rate = clk_get_rate(clk); + priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel; + + /* FIXME: add support for PHY revisions that have this bit + * inverted (e.g. through new property or based on PHY ID). + */ if (rate > 24500000 && rate < 25500000) { - phydev->dev_flags |= MICREL_PHY_25MHZ_CLK; + priv->rmii_ref_clk_sel_val = false; } else if (rate > 49500000 && rate < 50500000) { - phydev->dev_flags |= MICREL_PHY_50MHZ_CLK; + priv->rmii_ref_clk_sel_val = true; } else { dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate); return -EINVAL; } } - return kszphy_probe(phydev); + /* Support legacy board-file configuration */ + if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { + priv->rmii_ref_clk_sel = true; + priv->rmii_ref_clk_sel_val = true; + } + + return 0; } static struct phy_driver ksphy_driver[] = { @@ -589,7 +596,7 @@ static struct phy_driver ksphy_driver[] = { SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, - .probe = ksz8021_probe, + .probe = kszphy_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -606,7 +613,7 @@ static struct phy_driver ksphy_driver[] = { SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, - .probe = ksz8021_probe, + .probe = kszphy_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -658,7 +665,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8051_type, .probe = kszphy_probe, - .config_init = ks8051_config_init, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 53d33dee70e1..2e5b194b9b19 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -37,7 +37,6 @@ /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 -#define MICREL_PHY_25MHZ_CLK 0x00000002 #define MICREL_KSZ9021_EXTREG_CTRL 0xB #define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC |