diff options
| -rw-r--r-- | include/linux/fmc-sdb.h | 36 | ||||
| -rw-r--r-- | include/linux/fmc.h | 237 | ||||
| -rw-r--r-- | include/linux/ipmi-fru.h | 135 | ||||
| -rw-r--r-- | include/linux/sdb.h | 159 |
4 files changed, 567 insertions, 0 deletions
diff --git a/include/linux/fmc-sdb.h b/include/linux/fmc-sdb.h new file mode 100644 index 000000000000..1974317a9b3d --- /dev/null +++ b/include/linux/fmc-sdb.h @@ -0,0 +1,36 @@ +/* + * This file is separate from sdb.h, because I want that one to remain + * unchanged (as far as possible) from the official sdb distribution + * + * This file and associated functionality are a playground for me to + * understand stuff which will later be implemented in more generic places. + */ +#include <linux/sdb.h> + +/* This is the union of all currently defined types */ +union sdb_record { + struct sdb_interconnect ic; + struct sdb_device dev; + struct sdb_bridge bridge; + struct sdb_integration integr; + struct sdb_empty empty; +}; + +struct fmc_device; + +/* Every sdb table is turned into this structure */ +struct sdb_array { + int len; + int level; + unsigned long baseaddr; + struct fmc_device *fmc; /* the device that hosts it */ + struct sdb_array *parent; /* NULL at root */ + union sdb_record *record; /* copies of the struct */ + struct sdb_array **subtree; /* only valid for bridge items */ +}; + +extern int fmc_scan_sdb_tree(struct fmc_device *fmc, unsigned long address); +extern void fmc_show_sdb_tree(const struct fmc_device *fmc); +extern signed long fmc_find_sdb_device(struct sdb_array *tree, uint64_t vendor, + uint32_t device, unsigned long *sz); +extern int fmc_free_sdb_tree(struct fmc_device *fmc); diff --git a/include/linux/fmc.h b/include/linux/fmc.h new file mode 100644 index 000000000000..a3c498503983 --- /dev/null +++ b/include/linux/fmc.h @@ -0,0 +1,237 @@ +/* + * Copyright (C) 2012 CERN (www.cern.ch) + * Author: Alessandro Rubini <rubini@gnudd.com> + * + * Released according to the GNU GPL, version 2 or any later version. + * + * This work is part of the White Rabbit project, a research effort led + * by CERN, the European Institute for Nuclear Research. + */ +#ifndef __LINUX_FMC_H__ +#define __LINUX_FMC_H__ +#include <linux/types.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +struct fmc_device; +struct fmc_driver; + +/* + * This bus abstraction is developed separately from drivers, so we need + * to check the version of the data structures we receive. + */ + +#define FMC_MAJOR 3 +#define FMC_MINOR 0 +#define FMC_VERSION ((FMC_MAJOR << 16) | FMC_MINOR) +#define __FMC_MAJOR(x) ((x) >> 16) +#define __FMC_MINOR(x) ((x) & 0xffff) + +/* + * The device identification, as defined by the IPMI FRU (Field Replaceable + * Unit) includes four different strings to describe the device. Here we + * only match the "Board Manufacturer" and the "Board Product Name", + * ignoring the "Board Serial Number" and "Board Part Number". All 4 are + * expected to be strings, so they are treated as zero-terminated C strings. + * Unspecified string (NULL) means "any", so if both are unspecified this + * is a catch-all driver. So null entries are allowed and we use array + * and length. This is unlike pci and usb that use null-terminated arrays + */ +struct fmc_fru_id { + char *manufacturer; + char *product_name; +}; + +/* + * If the FPGA is already programmed (think Etherbone or the second + * SVEC slot), we can match on SDB devices in the memory image. This + * match uses an array of devices that must all be present, and the + * match is based on vendor and device only. Further checks are expected + * to happen in the probe function. Zero means "any" and catch-all is allowed. + */ +struct fmc_sdb_one_id { + uint64_t vendor; + uint32_t device; +}; +struct fmc_sdb_id { + struct fmc_sdb_one_id *cores; + int cores_nr; +}; + +struct fmc_device_id { + struct fmc_fru_id *fru_id; + int fru_id_nr; + struct fmc_sdb_id *sdb_id; + int sdb_id_nr; +}; + +/* This sizes the module_param_array used by generic module parameters */ +#define FMC_MAX_CARDS 32 + +/* The driver is a pretty simple thing */ +struct fmc_driver { + unsigned long version; + struct device_driver driver; + int (*probe)(struct fmc_device *); + int (*remove)(struct fmc_device *); + const struct fmc_device_id id_table; + /* What follows is for generic module parameters */ + int busid_n; + int busid_val[FMC_MAX_CARDS]; + int gw_n; + char *gw_val[FMC_MAX_CARDS]; +}; +#define to_fmc_driver(x) container_of((x), struct fmc_driver, driver) + +/* These are the generic parameters, that drivers may instantiate */ +#define FMC_PARAM_BUSID(_d) \ + module_param_array_named(busid, _d.busid_val, int, &_d.busid_n, 0444) +#define FMC_PARAM_GATEWARE(_d) \ + module_param_array_named(gateware, _d.gw_val, charp, &_d.gw_n, 0444) + +/* + * Drivers may need to configure gpio pins in the carrier. To read input + * (a very uncommon operation, and definitely not in the hot paths), just + * configure one gpio only and get 0 or 1 as retval of the config method + */ +struct fmc_gpio { + char *carrier_name; /* name or NULL for virtual pins */ + int gpio; + int _gpio; /* internal use by the carrier */ + int mode; /* GPIOF_DIR_OUT etc, from <linux/gpio.h> */ + int irqmode; /* IRQF_TRIGGER_LOW and so on */ +}; + +/* The numbering of gpio pins allows access to raw pins or virtual roles */ +#define FMC_GPIO_RAW(x) (x) /* 4096 of them */ +#define __FMC_GPIO_IS_RAW(x) ((x) < 0x1000) +#define FMC_GPIO_IRQ(x) ((x) + 0x1000) /* 256 of them */ +#define FMC_GPIO_LED(x) ((x) + 0x1100) /* 256 of them */ +#define FMC_GPIO_KEY(x) ((x) + 0x1200) /* 256 of them */ +#define FMC_GPIO_TP(x) ((x) + 0x1300) /* 256 of them */ +#define FMC_GPIO_USER(x) ((x) + 0x1400) /* 256 of them */ +/* We may add SCL and SDA, or other roles if the need arises */ + +/* GPIOF_DIR_IN etc are missing before 3.0. copy from <linux/gpio.h> */ +#ifndef GPIOF_DIR_IN +# define GPIOF_DIR_OUT (0 << 0) +# define GPIOF_DIR_IN (1 << 0) +# define GPIOF_INIT_LOW (0 << 1) +# define GPIOF_INIT_HIGH (1 << 1) +#endif + +/* + * The operations are offered by each carrier and should make driver + * design completely independent of the carrier. Named GPIO pins may be + * the exception. + */ +struct fmc_operations { + uint32_t (*readl)(struct fmc_device *fmc, int offset); + void (*writel)(struct fmc_device *fmc, uint32_t value, int offset); + int (*validate)(struct fmc_device *fmc, struct fmc_driver *drv); + int (*reprogram)(struct fmc_device *f, struct fmc_driver *d, char *gw); + int (*irq_request)(struct fmc_device *fmc, irq_handler_t h, + char *name, int flags); + void (*irq_ack)(struct fmc_device *fmc); + int (*irq_free)(struct fmc_device *fmc); + int (*gpio_config)(struct fmc_device *fmc, struct fmc_gpio *gpio, + int ngpio); + int (*read_ee)(struct fmc_device *fmc, int pos, void *d, int l); + int (*write_ee)(struct fmc_device *fmc, int pos, const void *d, int l); +}; + +/* Prefer this helper rather than calling of fmc->reprogram directly */ +extern int fmc_reprogram(struct fmc_device *f, struct fmc_driver *d, char *gw, + int sdb_entry); + +/* + * The device reports all information needed to access hw. + * + * If we have eeprom_len and not contents, the core reads it. + * Then, parsing of identifiers is done by the core which fills fmc_fru_id.. + * Similarly a device that must be matched based on SDB cores must + * fill the entry point and the core will scan the bus (FIXME: sdb match) + */ +struct fmc_device { + unsigned long version; + unsigned long flags; + struct module *owner; /* char device must pin it */ + struct fmc_fru_id id; /* for EEPROM-based match */ + struct fmc_operations *op; /* carrier-provided */ + int irq; /* according to host bus. 0 == none */ + int eeprom_len; /* Usually 8kB, may be less */ + int eeprom_addr; /* 0x50, 0x52 etc */ + uint8_t *eeprom; /* Full contents or leading part */ + char *carrier_name; /* "SPEC" or similar, for special use */ + void *carrier_data; /* "struct spec *" or equivalent */ + __iomem void *fpga_base; /* May be NULL (Etherbone) */ + __iomem void *slot_base; /* Set by the driver */ + struct fmc_device **devarray; /* Allocated by the bus */ + int slot_id; /* Index in the slot array */ + int nr_slots; /* Number of slots in this carrier */ + unsigned long memlen; /* Used for the char device */ + struct device dev; /* For Linux use */ + struct device *hwdev; /* The underlying hardware device */ + unsigned long sdbfs_entry; + struct sdb_array *sdb; + uint32_t device_id; /* Filled by the device */ + char *mezzanine_name; /* Defaults to ``fmc'' */ + void *mezzanine_data; +}; +#define to_fmc_device(x) container_of((x), struct fmc_device, dev) + +#define FMC_DEVICE_HAS_GOLDEN 1 +#define FMC_DEVICE_HAS_CUSTOM 2 +#define FMC_DEVICE_NO_MEZZANINE 4 +#define FMC_DEVICE_MATCH_SDB 8 /* fmc-core must scan sdb in fpga */ + +/* + * If fpga_base can be used, the carrier offers no readl/writel methods, and + * this expands to a single, fast, I/O access. + */ +static inline uint32_t fmc_readl(struct fmc_device *fmc, int offset) +{ + if (unlikely(fmc->op->readl)) + return fmc->op->readl(fmc, offset); + return readl(fmc->fpga_base + offset); +} +static inline void fmc_writel(struct fmc_device *fmc, uint32_t val, int off) +{ + if (unlikely(fmc->op->writel)) + fmc->op->writel(fmc, val, off); + else + writel(val, fmc->fpga_base + off); +} + +/* pci-like naming */ +static inline void *fmc_get_drvdata(const struct fmc_device *fmc) +{ + return dev_get_drvdata(&fmc->dev); +} + +static inline void fmc_set_drvdata(struct fmc_device *fmc, void *data) +{ + dev_set_drvdata(&fmc->dev, data); +} + +/* The 4 access points */ +extern int fmc_driver_register(struct fmc_driver *drv); +extern void fmc_driver_unregister(struct fmc_driver *drv); +extern int fmc_device_register(struct fmc_device *tdev); +extern void fmc_device_unregister(struct fmc_device *tdev); + +/* Two more for device sets, all driven by the same FPGA */ +extern int fmc_device_register_n(struct fmc_device **devs, int n); +extern void fmc_device_unregister_n(struct fmc_device **devs, int n); + +/* Internal cross-calls between files; not exported to other modules */ +extern int fmc_match(struct device *dev, struct device_driver *drv); +extern int fmc_fill_id_info(struct fmc_device *fmc); +extern void fmc_free_id_info(struct fmc_device *fmc); +extern void fmc_dump_eeprom(const struct fmc_device *fmc); +extern void fmc_dump_sdb(const struct fmc_device *fmc); + +#endif /* __LINUX_FMC_H__ */ diff --git a/include/linux/ipmi-fru.h b/include/linux/ipmi-fru.h new file mode 100644 index 000000000000..4d3a76380e32 --- /dev/null +++ b/include/linux/ipmi-fru.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) 2012 CERN (www.cern.ch) + * Author: Alessandro Rubini <rubini@gnudd.com> + * + * Released according to the GNU GPL, version 2 or any later version. + * + * This work is part of the White Rabbit project, a research effort led + * by CERN, the European Institute for Nuclear Research. + */ +#ifndef __LINUX_IPMI_FRU_H__ +#define __LINUX_IPMI_FRU_H__ +#ifdef __KERNEL__ +# include <linux/types.h> +# include <linux/string.h> +#else +# include <stdint.h> +# include <string.h> +#endif + +/* + * These structures match the unaligned crap we have in FRU1011.pdf + * (http://download.intel.com/design/servers/ipmi/FRU1011.pdf) + */ + +/* chapter 8, page 5 */ +struct fru_common_header { + uint8_t format; /* 0x01 */ + uint8_t internal_use_off; /* multiple of 8 bytes */ + uint8_t chassis_info_off; /* multiple of 8 bytes */ + uint8_t board_area_off; /* multiple of 8 bytes */ + uint8_t product_area_off; /* multiple of 8 bytes */ + uint8_t multirecord_off; /* multiple of 8 bytes */ + uint8_t pad; /* must be 0 */ + uint8_t checksum; /* sum modulo 256 must be 0 */ +}; + +/* chapter 9, page 5 -- internal_use: not used by us */ + +/* chapter 10, page 6 -- chassis info: not used by us */ + +/* chapter 13, page 9 -- used by board_info_area below */ +struct fru_type_length { + uint8_t type_length; + uint8_t data[0]; +}; + +/* chapter 11, page 7 */ +struct fru_board_info_area { + uint8_t format; /* 0x01 */ + uint8_t area_len; /* multiple of 8 bytes */ + uint8_t language; /* I hope it's 0 */ + uint8_t mfg_date[3]; /* LSB, minutes since 1996-01-01 */ + struct fru_type_length tl[0]; /* type-length stuff follows */ + + /* + * the TL there are in order: + * Board Manufacturer + * Board Product Name + * Board Serial Number + * Board Part Number + * FRU File ID (may be null) + * more manufacturer-specific stuff + * 0xc1 as a terminator + * 0x00 pad to a multiple of 8 bytes - 1 + * checksum (sum of all stuff module 256 must be zero) + */ +}; + +enum fru_type { + FRU_TYPE_BINARY = 0x00, + FRU_TYPE_BCDPLUS = 0x40, + FRU_TYPE_ASCII6 = 0x80, + FRU_TYPE_ASCII = 0xc0, /* not ascii: depends on language */ +}; + +/* + * some helpers + */ +static inline struct fru_board_info_area *fru_get_board_area( + const struct fru_common_header *header) +{ + /* we know for sure that the header is 8 bytes in size */ + return (struct fru_board_info_area *)(header + header->board_area_off); +} + +static inline int fru_type(struct fru_type_length *tl) +{ + return tl->type_length & 0xc0; +} + +static inline int fru_length(struct fru_type_length *tl) +{ + return (tl->type_length & 0x3f) + 1; /* len of whole record */ +} + +/* assume ascii-latin1 encoding */ +static inline int fru_strlen(struct fru_type_length *tl) +{ + return fru_length(tl) - 1; +} + +static inline char *fru_strcpy(char *dest, struct fru_type_length *tl) +{ + int len = fru_strlen(tl); + memcpy(dest, tl->data, len); + dest[len] = '\0'; + return dest; +} + +static inline struct fru_type_length *fru_next_tl(struct fru_type_length *tl) +{ + return tl + fru_length(tl); +} + +static inline int fru_is_eof(struct fru_type_length *tl) +{ + return tl->type_length == 0xc1; +} + +/* + * External functions defined in fru-parse.c. + */ +extern int fru_header_cksum_ok(struct fru_common_header *header); +extern int fru_bia_cksum_ok(struct fru_board_info_area *bia); + +/* All these 4 return allocated strings by calling fru_alloc() */ +extern char *fru_get_board_manufacturer(struct fru_common_header *header); +extern char *fru_get_product_name(struct fru_common_header *header); +extern char *fru_get_serial_number(struct fru_common_header *header); +extern char *fru_get_part_number(struct fru_common_header *header); + +/* This must be defined by the caller of the above functions */ +extern void *fru_alloc(size_t size); + +#endif /* __LINUX_IMPI_FRU_H__ */ diff --git a/include/linux/sdb.h b/include/linux/sdb.h new file mode 100644 index 000000000000..fbb76a46c8a5 --- /dev/null +++ b/include/linux/sdb.h @@ -0,0 +1,159 @@ +/* + * This is the official version 1.1 of sdb.h + */ +#ifndef __SDB_H__ +#define __SDB_H__ +#ifdef __KERNEL__ +#include <linux/types.h> +#else +#include <stdint.h> +#endif + +/* + * All structures are 64 bytes long and are expected + * to live in an array, one for each interconnect. + * Most fields of the structures are shared among the + * various types, and most-specific fields are at the + * beginning (for alignment reasons, and to keep the + * magic number at the head of the interconnect record + */ + +/* Product, 40 bytes at offset 24, 8-byte aligned + * + * device_id is vendor-assigned; version is device-specific, + * date is hex (e.g 0x20120501), name is UTF-8, blank-filled + * and not terminated with a 0 byte. + */ +struct sdb_product { + uint64_t vendor_id; /* 0x18..0x1f */ + uint32_t device_id; /* 0x20..0x23 */ + uint32_t version; /* 0x24..0x27 */ + uint32_t date; /* 0x28..0x2b */ + uint8_t name[19]; /* 0x2c..0x3e */ + uint8_t record_type; /* 0x3f */ +}; + +/* + * Component, 56 bytes at offset 8, 8-byte aligned + * + * The address range is first to last, inclusive + * (for example 0x100000 - 0x10ffff) + */ +struct sdb_component { + uint64_t addr_first; /* 0x08..0x0f */ + uint64_t addr_last; /* 0x10..0x17 */ + struct sdb_product product; /* 0x18..0x3f */ +}; + +/* Type of the SDB record */ +enum sdb_record_type { + sdb_type_interconnect = 0x00, + sdb_type_device = 0x01, + sdb_type_bridge = 0x02, + sdb_type_integration = 0x80, + sdb_type_repo_url = 0x81, + sdb_type_synthesis = 0x82, + sdb_type_empty = 0xFF, +}; + +/* Type 0: interconnect (first of the array) + * + * sdb_records is the length of the table including this first + * record, version is 1. The bus type is enumerated later. + */ +#define SDB_MAGIC 0x5344422d /* "SDB-" */ +struct sdb_interconnect { + uint32_t sdb_magic; /* 0x00-0x03 */ + uint16_t sdb_records; /* 0x04-0x05 */ + uint8_t sdb_version; /* 0x06 */ + uint8_t sdb_bus_type; /* 0x07 */ + struct sdb_component sdb_component; /* 0x08-0x3f */ +}; + +/* Type 1: device + * + * class is 0 for "custom device", other values are + * to be standardized; ABI version is for the driver, + * bus-specific bits are defined by each bus (see below) + */ +struct sdb_device { + uint16_t abi_class; /* 0x00-0x01 */ + uint8_t abi_ver_major; /* 0x02 */ + uint8_t abi_ver_minor; /* 0x03 */ + uint32_t bus_specific; /* 0x04-0x07 */ + struct sdb_component sdb_component; /* 0x08-0x3f */ +}; + +/* Type 2: bridge + * + * child is the address of the nested SDB table + */ +struct sdb_bridge { + uint64_t sdb_child; /* 0x00-0x07 */ + struct sdb_component sdb_component; /* 0x08-0x3f */ +}; + +/* Type 0x80: integration + * + * all types with bit 7 set are meta-information, so + * software can ignore the types it doesn't know. Here we + * just provide product information for an aggregate device + */ +struct sdb_integration { + uint8_t reserved[24]; /* 0x00-0x17 */ + struct sdb_product product; /* 0x08-0x3f */ +}; + +/* Type 0x81: Top module repository url + * + * again, an informative field that software can ignore + */ +struct sdb_repo_url { + uint8_t repo_url[63]; /* 0x00-0x3e */ + uint8_t record_type; /* 0x3f */ +}; + +/* Type 0x82: Synthesis tool information + * + * this informative record + */ +struct sdb_synthesis { + uint8_t syn_name[16]; /* 0x00-0x0f */ + uint8_t commit_id[16]; /* 0x10-0x1f */ + uint8_t tool_name[8]; /* 0x20-0x27 */ + uint32_t tool_version; /* 0x28-0x2b */ + uint32_t date; /* 0x2c-0x2f */ + uint8_t user_name[15]; /* 0x30-0x3e */ + uint8_t record_type; /* 0x3f */ +}; + +/* Type 0xff: empty + * + * this allows keeping empty slots during development, + * so they can be filled later with minimal efforts and + * no misleading description is ever shipped -- hopefully. + * It can also be used to pad a table to a desired length. + */ +struct sdb_empty { + uint8_t reserved[63]; /* 0x00-0x3e */ + uint8_t record_type; /* 0x3f */ +}; + +/* The type of bus, for bus-specific flags */ +enum sdb_bus_type { + sdb_wishbone = 0x00, + sdb_data = 0x01, +}; + +#define SDB_WB_WIDTH_MASK 0x0f +#define SDB_WB_ACCESS8 0x01 +#define SDB_WB_ACCESS16 0x02 +#define SDB_WB_ACCESS32 0x04 +#define SDB_WB_ACCESS64 0x08 +#define SDB_WB_LITTLE_ENDIAN 0x80 + +#define SDB_DATA_READ 0x04 +#define SDB_DATA_WRITE 0x02 +#define SDB_DATA_EXEC 0x01 + +#endif /* __SDB_H__ */ |