summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--sound/soc/codecs/wm8903.c20
-rw-r--r--sound/soc/codecs/wm8903.h19
2 files changed, 6 insertions, 33 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 02de5ae42d63..b9843f72c455 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -1014,7 +1014,7 @@ static int wm8903_add_widgets(struct snd_soc_codec *codec)
static int wm8903_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg, reg2;
+ u16 reg;
switch (level) {
case SND_SOC_BIAS_ON:
@@ -1038,23 +1038,15 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
wm8903_run_sequence(codec, 0);
wm8903_sync_reg_cache(codec, codec->reg_cache);
- /* Enable low impedence charge pump output */
- reg = snd_soc_read(codec,
- WM8903_CONTROL_INTERFACE_TEST_1);
- snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
- reg | WM8903_TEST_KEY);
- reg2 = snd_soc_read(codec, WM8903_CHARGE_PUMP_TEST_1);
- snd_soc_write(codec, WM8903_CHARGE_PUMP_TEST_1,
- reg2 | WM8903_CP_SW_KELVIN_MODE_MASK);
- snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
- reg);
-
/* By default no bypass paths are enabled so
* enable Class W support.
*/
dev_dbg(codec->dev, "Enabling Class W\n");
- snd_soc_write(codec, WM8903_CLASS_W_0, reg |
- WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
+ snd_soc_update_bits(codec, WM8903_CLASS_W_0,
+ WM8903_CP_DYN_FREQ |
+ WM8903_CP_DYN_V,
+ WM8903_CP_DYN_FREQ |
+ WM8903_CP_DYN_V);
}
reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0);
diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h
index e47b8c8be921..5f23d3ca45f8 100644
--- a/sound/soc/codecs/wm8903.h
+++ b/sound/soc/codecs/wm8903.h
@@ -94,8 +94,6 @@ extern int wm8903_mic_detect(struct snd_soc_codec *codec,
#define WM8903_INTERRUPT_STATUS_1_MASK 0x7A
#define WM8903_INTERRUPT_POLARITY_1 0x7B
#define WM8903_INTERRUPT_CONTROL 0x7E
-#define WM8903_CONTROL_INTERFACE_TEST_1 0x81
-#define WM8903_CHARGE_PUMP_TEST_1 0x95
#define WM8903_CLOCK_RATE_TEST_4 0xA4
#define WM8903_ANALOGUE_OUTPUT_BIAS_0 0xAC
@@ -1202,23 +1200,6 @@ extern int wm8903_mic_detect(struct snd_soc_codec *codec,
#define WM8903_IRQ_POL_WIDTH 1 /* IRQ_POL */
/*
- * R129 (0x81) - Control Interface Test 1
- */
-#define WM8903_USER_KEY 0x0002 /* USER_KEY */
-#define WM8903_USER_KEY_MASK 0x0002 /* USER_KEY */
-#define WM8903_USER_KEY_SHIFT 1 /* USER_KEY */
-#define WM8903_USER_KEY_WIDTH 1 /* USER_KEY */
-#define WM8903_TEST_KEY 0x0001 /* TEST_KEY */
-#define WM8903_TEST_KEY_MASK 0x0001 /* TEST_KEY */
-#define WM8903_TEST_KEY_SHIFT 0 /* TEST_KEY */
-#define WM8903_TEST_KEY_WIDTH 1 /* TEST_KEY */
-
-/*
- * R149 (0x95) - Charge Pump Test 1
- */
-#define WM8903_CP_SW_KELVIN_MODE_MASK 0x0006 /* CP_SW_KELVIN_MODE - [2:1] */
-#define WM8903_CP_SW_KELVIN_MODE_SHIFT 1 /* CP_SW_KELVIN_MODE - [2:1] */
-#define WM8903_CP_SW_KELVIN_MODE_WIDTH 2 /* CP_SW_KELVIN_MODE - [2:1] */
/*
* R164 (0xA4) - Clock Rate Test 4