diff options
-rw-r--r-- | Documentation/devicetree/bindings/iio/accel/mma8452.txt | 6 | ||||
-rw-r--r-- | drivers/iio/accel/mma8452.c | 21 |
2 files changed, 21 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt index e3c37467d7da..3c10e8581144 100644 --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -7,13 +7,18 @@ Required properties: * "fsl,mma8453" * "fsl,mma8652" * "fsl,mma8653" + - reg: the I2C address of the chip Optional properties: - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: interrupt mapping for GPIO IRQ + - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's + interrupt line in use. + Example: mma8453fc@1d { @@ -21,4 +26,5 @@ Example: reg = <0x1d>; interrupt-parent = <&gpio1>; interrupts = <5 0>; + interrupt-names = "INT2"; }; diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 1eccc2dcf14c..116a6e401a6a 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -29,6 +29,7 @@ #include <linux/iio/events.h> #include <linux/delay.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #define MMA8452_STATUS 0x00 #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0)) @@ -1130,13 +1131,21 @@ static int mma8452_probe(struct i2c_client *client, MMA8452_INT_FF_MT; int enabled_interrupts = MMA8452_INT_TRANS | MMA8452_INT_FF_MT; + int irq2; - /* Assume wired to INT1 pin */ - ret = i2c_smbus_write_byte_data(client, - MMA8452_CTRL_REG5, - supported_interrupts); - if (ret < 0) - return ret; + irq2 = of_irq_get_byname(client->dev.of_node, "INT2"); + + if (irq2 == client->irq) { + dev_dbg(&client->dev, "using interrupt line INT2\n"); + } else { + ret = i2c_smbus_write_byte_data(client, + MMA8452_CTRL_REG5, + supported_interrupts); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "using interrupt line INT1\n"); + } ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG4, |