summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml54
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.txt55
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.yaml170
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt1
-rw-r--r--Documentation/driver-api/thermal/sysfs-api.rst26
-rw-r--r--MAINTAINERS10
-rw-r--r--arch/arm64/configs/defconfig1
-rw-r--r--drivers/clk/qcom/clk-rpmh.c2
-rw-r--r--drivers/clk/qcom/gcc-qcs404.c2
-rw-r--r--drivers/clk/qcom/gcc-sdm845.c2
-rw-r--r--drivers/cpufreq/cpufreq-dt-platdev.c2
-rw-r--r--drivers/cpufreq/cpufreq_conservative.c2
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c2
-rw-r--r--drivers/cpufreq/cpufreq_performance.c2
-rw-r--r--drivers/cpufreq/cpufreq_powersave.c2
-rw-r--r--drivers/cpufreq/cpufreq_userspace.c2
-rw-r--r--drivers/cpufreq/qcom-cpufreq-hw.c2
-rw-r--r--drivers/thermal/Kconfig12
-rw-r--r--drivers/thermal/Makefile1
-rw-r--r--drivers/thermal/amlogic_thermal.c333
-rw-r--r--drivers/thermal/cpu_cooling.c404
-rw-r--r--drivers/thermal/qcom/tsens-8960.c4
-rw-r--r--drivers/thermal/qcom/tsens-common.c529
-rw-r--r--drivers/thermal/qcom/tsens-v0_1.c11
-rw-r--r--drivers/thermal/qcom/tsens-v1.c198
-rw-r--r--drivers/thermal/qcom/tsens-v2.c13
-rw-r--r--drivers/thermal/qcom/tsens.c62
-rw-r--r--drivers/thermal/qcom/tsens.h288
-rw-r--r--drivers/thermal/qoriq_thermal.c120
-rw-r--r--drivers/thermal/rcar_gen3_thermal.c4
-rw-r--r--drivers/thermal/thermal-generic-adc.c9
-rw-r--r--drivers/thermal/thermal_core.c107
-rw-r--r--drivers/thermal/thermal_mmio.c1
-rw-r--r--include/linux/cpu_cooling.h18
-rw-r--r--include/linux/energy_model.h3
-rw-r--r--include/linux/thermal.h11
-rw-r--r--kernel/sched/cpufreq_schedutil.c2
37 files changed, 1878 insertions, 589 deletions
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
new file mode 100644
index 000000000000..f761681e4c0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Thermal
+
+maintainers:
+ - Guillaume La Roque <glaroque@baylibre.com>
+
+description: Binding for Amlogic Thermal
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,g12a-cpu-thermal
+ - amlogic,g12a-ddr-thermal
+ - const: amlogic,g12a-thermal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ amlogic,ao-secure:
+ description: phandle to the ao-secure syscon
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - amlogic,ao-secure
+
+examples:
+ - |
+ cpu_temp: temperature-sensor@ff634800 {
+ compatible = "amlogic,g12a-cpu-thermal",
+ "amlogic,g12a-thermal";
+ reg = <0xff634800 0x50>;
+ interrupts = <0x0 0x24 0x0>;
+ clocks = <&clk 164>;
+ #thermal-sensor-cells = <0>;
+ amlogic,ao-secure = <&sec_AO>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
deleted file mode 100644
index 673cc1831ee9..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* QCOM SoC Temperature Sensor (TSENS)
-
-Required properties:
-- compatible:
- Must be one of the following:
- - "qcom,msm8916-tsens" (MSM8916)
- - "qcom,msm8974-tsens" (MSM8974)
- - "qcom,msm8996-tsens" (MSM8996)
- - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
- - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
- - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
- The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
- with version 2 of the TSENS IP. MSM8996 is the only exception because the
- generic property did not exist when support was added.
- Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
- any SoC with version 1 of the TSENS IP.
-
-- reg: Address range of the thermal registers.
- New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
- register spaces separately, with order being TM before SROT.
- See Example 2, below.
-
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
-- #qcom,sensors: Number of sensors in tsens block
-- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
-nvmem cells
-
-Example 1 (legacy support before a fallback tsens-v2 property was introduced):
-tsens: thermal-sensor@900000 {
- compatible = "qcom,msm8916-tsens";
- reg = <0x4a8000 0x2000>;
- nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
- nvmem-cell-names = "caldata", "calsel";
- #thermal-sensor-cells = <1>;
- };
-
-Example 2 (for any platform containing v2 of the TSENS IP):
-tsens0: thermal-sensor@c263000 {
- compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
- reg = <0xc263000 0x1ff>, /* TM */
- <0xc222000 0x1ff>; /* SROT */
- #qcom,sensors = <13>;
- #thermal-sensor-cells = <1>;
- };
-
-Example 3 (for any platform containing v1 of the TSENS IP):
-tsens: thermal-sensor@4a9000 {
- compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
- reg = <0x004a9000 0x1000>, /* TM */
- <0x004a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_caldata>;
- nvmem-cell-names = "calib";
- #qcom,sensors = <10>;
- #thermal-sensor-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
new file mode 100644
index 000000000000..eef13b9446a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM SoC Temperature Sensor (TSENS)
+
+maintainers:
+ - Amit Kucheria <amit.kucheria@linaro.org>
+
+description: |
+ QCOM SoCs have TSENS IP to allow temperature measurement. There are currently
+ three distinct major versions of the IP that is supported by a single driver.
+ The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
+ everything before v1 when there was no versioning information.
+
+properties:
+ compatible:
+ oneOf:
+ - description: v0.1 of TSENS
+ items:
+ - enum:
+ - qcom,msm8916-tsens
+ - qcom,msm8974-tsens
+ - const: qcom,tsens-v0_1
+
+ - description: v1 of TSENS
+ items:
+ - enum:
+ - qcom,msm8976-tsens
+ - qcom,qcs404-tsens
+ - const: qcom,tsens-v1
+
+ - description: v2 of TSENS
+ items:
+ - enum:
+ - qcom,msm8996-tsens
+ - qcom,msm8998-tsens
+ - qcom,sdm845-tsens
+ - const: qcom,tsens-v2
+
+ reg:
+ maxItems: 2
+ items:
+ - description: TM registers
+ - description: SROT registers
+
+ nvmem-cells:
+ minItems: 1
+ maxItems: 2
+ description:
+ Reference to an nvmem node for the calibration data
+
+ nvmem-cells-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - enum:
+ - caldata
+ - calsel
+
+ "#qcom,sensors":
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 1
+ - maximum: 16
+ description:
+ Number of sensors enabled on this platform
+
+ "#thermal-sensor-cells":
+ const: 1
+ description:
+ Number of cells required to uniquely identify the thermal sensors. Since
+ we have multiple sensors this is set to 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8916-tsens
+ - qcom,msm8974-tsens
+ - qcom,msm8976-tsens
+ - qcom,qcs404-tsens
+ - qcom,tsens-v0_1
+ - qcom,tsens-v1
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: Combined interrupt if upper or lower threshold crossed
+ interrupt-names:
+ items:
+ - const: uplow
+
+ else:
+ properties:
+ interrupts:
+ items:
+ - description: Combined interrupt if upper or lower threshold crossed
+ - description: Interrupt if critical threshold crossed
+ interrupt-names:
+ items:
+ - const: uplow
+ - const: critical
+
+required:
+ - compatible
+ - reg
+ - "#qcom,sensors"
+ - interrupts
+ - interrupt-names
+ - "#thermal-sensor-cells"
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example 1 (legacy: for pre v1 IP):
+ tsens1: thermal-sensor@900000 {
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
+
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "caldata", "calsel";
+
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <5>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example 2 (for any platform containing v1 of the TSENS IP):
+ tsens2: thermal-sensor@4a9000 {
+ compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+
+ nvmem-cells = <&tsens_caldata>;
+ nvmem-cell-names = "calib";
+
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <10>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example 3 (for any platform containing v2 of the TSENS IP):
+ tsens3: thermal-sensor@c263000 {
+ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+ reg = <0xc263000 0x1ff>,
+ <0xc222000 0x1ff>;
+
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index b6ab60f6abbf..12c740b975f7 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -8,6 +8,7 @@ Required properties:
- compatible : "renesas,<soctype>-thermal",
Examples with soctypes are:
- "renesas,r8a774a1-thermal" (RZ/G2M)
+ - "renesas,r8a774b1-thermal" (RZ/G2N)
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
- "renesas,r8a77965-thermal" (R-Car M3-N)
diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
index fab2c9b36d08..b40b1f839148 100644
--- a/Documentation/driver-api/thermal/sysfs-api.rst
+++ b/Documentation/driver-api/thermal/sysfs-api.rst
@@ -725,24 +725,10 @@ method, the sys I/F structure will be built like this::
|---temp1_input: 37000
|---temp1_crit: 100000
-4. Event Notification
+4. Export Symbol APIs
=====================
-The framework includes a simple notification mechanism, in the form of a
-netlink event. Netlink socket initialization is done during the _init_
-of the framework. Drivers which intend to use the notification mechanism
-just need to call thermal_generate_netlink_event() with two arguments viz
-(originator, event). The originator is a pointer to struct thermal_zone_device
-from where the event has been originated. An integer which represents the
-thermal zone device will be used in the message to identify the zone. The
-event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,
-THERMAL_DEV_FAULT}. Notification can be sent when the current temperature
-crosses any of the configured thresholds.
-
-5. Export Symbol APIs
-=====================
-
-5.1. get_tz_trend
+4.1. get_tz_trend
-----------------
This function returns the trend of a thermal zone, i.e the rate of change
@@ -751,14 +737,14 @@ are supposed to implement the callback. If they don't, the thermal
framework calculated the trend by comparing the previous and the current
temperature values.
-5.2. get_thermal_instance
+4.2. get_thermal_instance
-------------------------
This function returns the thermal_instance corresponding to a given
{thermal_zone, cooling_device, trip_point} combination. Returns NULL
if such an instance does not exist.
-5.3. thermal_notify_framework
+4.3. thermal_notify_framework
-----------------------------
This function handles the trip events from sensor drivers. It starts
@@ -768,14 +754,14 @@ and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
The throttling policy is based on the configured platform data; if no
platform data is provided, this uses the step_wise throttling policy.
-5.4. thermal_cdev_update
+4.4. thermal_cdev_update
------------------------
This function serves as an arbitrator to set the state of a cooling
device. It sets the cooling device to the deepest cooling state if
possible.
-6. thermal_emergency_poweroff
+5. thermal_emergency_poweroff
=============================
On an event of critical trip temperature crossing. Thermal framework
diff --git a/MAINTAINERS b/MAINTAINERS
index 061d59a4a80b..ec1565dffa12 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13688,6 +13688,7 @@ L: linux-pm@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/thermal/qcom/
+F: Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
M: Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -16310,6 +16311,15 @@ F: Documentation/driver-api/thermal/cpu-cooling-api.rst
F: drivers/thermal/cpu_cooling.c
F: include/linux/cpu_cooling.h
+THERMAL DRIVER FOR AMLOGIC SOCS
+M: Guillaume La Roque <glaroque@baylibre.com>
+L: linux-pm@vger.kernel.org
+L: linux-amlogic@lists.infradead.org
+W: http://linux-meson.com/
+S: Supported
+F: drivers/thermal/amlogic_thermal.c
+F: Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+
THINKPAD ACPI EXTRAS DRIVER
M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
L: ibm-acpi-devel@lists.sourceforge.net
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c9a867ac32d4..89b4feced426 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -71,6 +71,7 @@ CONFIG_COMPAT=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_HIBERNATION=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+CONFIG_ENERGY_MODEL=y
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_PSCI_CPUIDLE=y
CONFIG_CPU_FREQ=y
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 2dbbe47e8d4f..7ed313ad6e43 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -500,7 +500,7 @@ static int __init clk_rpmh_init(void)
{
return platform_driver_register(&clk_rpmh_driver);
}
-subsys_initcall(clk_rpmh_init);
+core_initcall(clk_rpmh_init);
static void __exit clk_rpmh_exit(void)
{
diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c
index bd32212f37e6..9b0c4ce2ef4e 100644
--- a/drivers/clk/qcom/gcc-qcs404.c
+++ b/drivers/clk/qcom/gcc-qcs404.c
@@ -2855,7 +2855,7 @@ static int __init gcc_qcs404_init(void)
{
return platform_driver_register(&gcc_qcs404_driver);
}
-subsys_initcall(gcc_qcs404_init);
+core_initcall(gcc_qcs404_init);
static void __exit gcc_qcs404_exit(void)
{
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index d2142fe46a8e..f7b370f3acef 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -3628,7 +3628,7 @@ static int __init gcc_sdm845_init(void)
{
return platform_driver_register(&gcc_sdm845_driver);
}
-subsys_initcall(gcc_sdm845_init);
+core_initcall(gcc_sdm845_init);
static void __exit gcc_sdm845_exit(void)
{
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 54bc76743b1f..f1d170dcf4d3 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -180,4 +180,4 @@ create_pdev:
-1, data,
sizeof(struct cpufreq_dt_platform_data)));
}
-device_initcall(cpufreq_dt_platdev_init);
+core_initcall(cpufreq_dt_platdev_init);
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index b66e81c06a57..737ff3b9c2c0 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -346,7 +346,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
return CPU_FREQ_GOV_CONSERVATIVE;
}
-fs_initcall(cpufreq_gov_dbs_init);
+core_initcall(cpufreq_gov_dbs_init);
#else
module_init(cpufreq_gov_dbs_init);
#endif
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index dced033875bf..82a4d37ddecb 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -483,7 +483,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
return CPU_FREQ_GOV_ONDEMAND;
}
-fs_initcall(cpufreq_gov_dbs_init);
+core_initcall(cpufreq_gov_dbs_init);
#else
module_init(cpufreq_gov_dbs_init);
#endif
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index aaa04dfcacd9..def9afe0f5b8 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -50,5 +50,5 @@ MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION("CPUfreq policy governor 'performance'");
MODULE_LICENSE("GPL");
-fs_initcall(cpufreq_gov_performance_init);
+core_initcall(cpufreq_gov_performance_init);
module_exit(cpufreq_gov_performance_exit);
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index c143dc237d87..1ae66019eb83 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -43,7 +43,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
return &cpufreq_gov_powersave;
}
-fs_initcall(cpufreq_gov_powersave_init);
+core_initcall(cpufreq_gov_powersave_init);
#else
module_init(cpufreq_gov_powersave_init);
#endif
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index cbd81c58cb8f..b43e7cd502c5 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -147,7 +147,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
return &cpufreq_gov_userspace;
}
-fs_initcall(cpufreq_gov_userspace_init);
+core_initcall(cpufreq_gov_userspace_init);
#else
module_init(cpufreq_gov_userspace_init);
#endif
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index a9ae2f84a4ef..fc92a8842e25 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -334,7 +334,7 @@ static int __init qcom_cpufreq_hw_init(void)
{
return platform_driver_register(&qcom_cpufreq_hw_driver);
}
-device_initcall(qcom_cpufreq_hw_init);
+postcore_initcall(qcom_cpufreq_hw_init);
static void __exit qcom_cpufreq_hw_exit(void)
{
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 001a21abcc28..59b79fc48266 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -144,6 +144,7 @@ config THERMAL_GOV_USER_SPACE
config THERMAL_GOV_POWER_ALLOCATOR
bool "Power allocator thermal governor"
+ depends on ENERGY_MODEL
help
Enable this to manage platform thermals by dynamically
allocating and limiting power to devices.
@@ -348,6 +349,17 @@ config MTK_THERMAL
Enable this option if you want to have support for thermal management
controller present in Mediatek SoCs
+config AMLOGIC_THERMAL
+ tristate "Amlogic Thermal Support"
+ default ARCH_MESON
+ depends on OF && ARCH_MESON
+ help
+ If you say yes here you get support for Amlogic Thermal
+ for G12 SoC Family.
+
+ This driver can also be built as a module. If so, the module will
+ be called amlogic_thermal.
+
menu "Intel thermal drivers"
depends on X86 || X86_INTEL_QUARK || COMPILE_TEST
source "drivers/thermal/intel/Kconfig"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 74a37c7f847a..baeb70bf0568 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
+obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
new file mode 100644
index 000000000000..8a9e9bc421c6
--- /dev/null
+++ b/drivers/thermal/amlogic_thermal.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Thermal Sensor Driver
+ *
+ * Copyright (C) 2017 Huan Biao <huan.biao@amlogic.com>
+ * Copyright (C) 2019 Guillaume La Roque <glaroque@baylibre.com>
+ *
+ * Register value to celsius temperature formulas:
+ * Read_Val m * U
+ * U = ---------, Uptat = ---------
+ * 2^16 1 + n * U
+ *
+ * Temperature = A * ( Uptat + u_efuse / 2^16 )- B
+ *
+ * A B m n : calibration parameters
+ * u_efuse : fused calibration value, it's a signed 16 bits value
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define TSENSOR_CFG_REG1 0x4
+ #define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
+ #define TSENSOR_CFG_REG1_RSET_ADC BIT(11)
+ #define TSENSOR_CFG_REG1_VCM_EN BIT(10)
+ #define TSENSOR_CFG_REG1_VBG_EN BIT(9)
+ #define TSENSOR_CFG_REG1_OUT_CTL BIT(6)
+ #define TSENSOR_CFG_REG1_FILTER_EN BIT(5)
+ #define TSENSOR_CFG_REG1_DEM_EN BIT(3)
+ #define TSENSOR_CFG_REG1_CH_SEL GENMASK(1, 0)
+ #define TSENSOR_CFG_REG1_ENABLE \
+ (TSENSOR_CFG_REG1_FILTER_EN | \
+ TSENSOR_CFG_REG1_VCM_EN | \
+ TSENSOR_CFG_REG1_VBG_EN | \
+ TSENSOR_CFG_REG1_DEM_EN | \
+ TSENSOR_CFG_REG1_CH_SEL)
+
+#define TSENSOR_STAT0 0x40
+
+#define TSENSOR_STAT9 0x64
+
+#define TSENSOR_READ_TEMP_MASK GENMASK(15, 0)
+#define TSENSOR_TEMP_MASK GENMASK(11, 0)
+
+#define TSENSOR_TRIM_SIGN_MASK BIT(15)
+#define TSENSOR_TRIM_TEMP_MASK GENMASK(14, 0)
+#define TSENSOR_TRIM_VERSION_MASK GENMASK(31, 24)
+
+#define TSENSOR_TRIM_VERSION(_version) \
+ FIELD_GET(TSENSOR_TRIM_VERSION_MASK, _version)
+
+#define TSENSOR_TRIM_CALIB_VALID_MASK (GENMASK(3, 2) | BIT(7))
+
+#define TSENSOR_CALIB_OFFSET 1
+#define TSENSOR_CALIB_SHIFT 4
+
+/**
+ * struct amlogic_thermal_soc_calib_data
+ * @A, B, m, n: calibration parameters
+ * This structure is required for configuration of amlogic thermal driver.
+ */
+struct amlogic_thermal_soc_calib_data {
+ int A;
+ int B;
+ int m;
+ int n;
+};
+
+/**
+ * struct amlogic_thermal_data
+ * @u_efuse_off: register offset to read fused calibration value
+ * @calibration_parameters: calibration parameters structure pointer
+ * @regmap_config: regmap config for the device
+ * This structure is required for configuration of amlogic thermal driver.
+ */
+struct amlogic_thermal_data {
+ int u_efuse_off;
+ const struct amlogic_thermal_soc_calib_data *calibration_parameters;
+ const struct regmap_config *regmap_config;
+};
+
+struct amlogic_thermal {
+ struct platform_device *pdev;
+ const struct amlogic_thermal_data *data;
+ struct regmap *regmap;
+ struct regmap *sec_ao_map;
+ struct clk *clk;
+ struct thermal_zone_device *tzd;
+ u32 trim_info;
+};
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree milliCelsius.
+ */
+static int amlogic_thermal_code_to_millicelsius(struct amlogic_thermal *pdata,
+ int temp_code)
+{
+ const struct amlogic_thermal_soc_calib_data *param =
+ pdata->data->calibration_parameters;
+ int temp;
+ s64 factor, Uptat, uefuse;
+
+ uefuse = pdata->trim_info & TSENSOR_TRIM_SIGN_MASK ?
+ ~(pdata->trim_info & TSENSOR_TRIM_TEMP_MASK) + 1 :
+ (pdata->trim_info & TSENSOR_TRIM_TEMP_MASK);
+
+ factor = param->n * temp_code;
+ factor = div_s64(factor, 100);
+
+ Uptat = temp_code * param->m;
+ Uptat = div_s64(Uptat, 100);
+ Uptat = Uptat * BIT(16);
+ Uptat = div_s64(Uptat, BIT(16) + factor);
+
+ temp = (Uptat + uefuse) * param->A;
+ temp = div_s64(temp, BIT(16));
+ temp = (temp - param->B) * 100;
+
+ return temp;
+}
+
+static int amlogic_thermal_initialize(struct amlogic_thermal *pdata)
+{
+ int ret = 0;
+ int ver;
+
+ regmap_read(pdata->sec_ao_map, pdata->data->u_efuse_off,
+ &pdata->trim_info);
+
+ ver = TSENSOR_TRIM_VERSION(pdata->trim_info);
+
+ if ((ver & TSENSOR_TRIM_CALIB_VALID_MASK) == 0) {
+ ret = -EINVAL;
+ dev_err(&pdata->pdev->dev,
+ "tsensor thermal calibration not supported: 0x%x!\n",
+ ver);
+ }
+
+ return ret;
+}
+
+static int amlogic_thermal_enable(struct amlogic_thermal *data)
+{
+ int ret;
+
+ ret = clk_prepare_enable(data->clk);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
+ TSENSOR_CFG_REG1_ENABLE, TSENSOR_CFG_REG1_ENABLE);
+
+ return 0;
+}
+
+static int amlogic_thermal_disable(struct amlogic_thermal *data)
+{
+ regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
+ TSENSOR_CFG_REG1_ENABLE, 0);
+ clk_disable_unprepare(data->clk);
+
+ return 0;
+}
+
+static int amlogic_thermal_get_temp(void *data, int *temp)
+{
+ unsigned int tval;
+ struct amlogic_thermal *pdata = data;
+
+ if (!data)
+ return -EINVAL;
+
+ regmap_read(pdata->regmap, TSENSOR_STAT0, &tval);
+ *temp =
+ amlogic_thermal_code_to_millicelsius(pdata,
+ tval & TSENSOR_READ_TEMP_MASK);
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops amlogic_thermal_ops = {
+ .get_temp = amlogic_thermal_get_temp,
+};
+
+static const struct regmap_config amlogic_thermal_regmap_config_g12a = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = TSENSOR_STAT9,
+};
+
+static const struct amlogic_thermal_soc_calib_data amlogic_thermal_g12a = {
+ .A = 9411,
+ .B = 3159,
+ .m = 424,
+ .n = 324,
+};
+
+static const struct amlogic_thermal_data amlogic_thermal_g12a_cpu_param = {
+ .u_efuse_off = 0x128,
+ .calibration_parameters = &amlogic_thermal_g12a,
+ .regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
+static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
+ .u_efuse_off = 0xf0,
+ .calibration_parameters = &amlogic_thermal_g12a,
+ .regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
+static const struct of_device_id of_amlogic_thermal_match[] = {
+ {
+ .compatible = "amlogic,g12a-ddr-thermal",
+ .data = &amlogic_thermal_g12a_ddr_param,
+ },
+ {
+ .compatible = "amlogic,g12a-cpu-thermal",
+ .data = &amlogic_thermal_g12a_cpu_param,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
+
+static int amlogic_thermal_probe(struct platform_device *pdev)
+{
+ struct amlogic_thermal *pdata;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+ int ret;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->data = of_device_get_match_data(dev);
+ pdata->pdev = pdev;
+ platform_set_drvdata(pdev, pdata);
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base)) {
+ dev_err(dev, "failed to get io address\n");
+ return PTR_ERR(base);
+ }
+
+ pdata->regmap = devm_regmap_init_mmio(dev, base,
+ pdata->data->regmap_config);
+ if (IS_ERR(pdata->regmap))
+ return PTR_ERR(pdata->regmap);
+
+ pdata->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(pdata->clk)) {
+ if (PTR_ERR(pdata->clk) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get clock\n");
+ return PTR_ERR(pdata->clk);
+ }
+
+ pdata->sec_ao_map = syscon_regmap_lookup_by_phandle
+ (pdev->dev.of_node, "amlogic,ao-secure");
+ if (IS_ERR(pdata->sec_ao_map)) {
+ dev_err(dev, "syscon regmap lookup failed.\n");
+ return PTR_ERR(pdata->sec_ao_map);
+ }
+
+ pdata->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ 0,
+ pdata,
+ &amlogic_thermal_ops);
+ if (IS_ERR(pdata->tzd)) {
+ ret = PTR_ERR(pdata->tzd);
+ dev_err(dev, "Failed to register tsensor: %d\n", ret);
+ return ret;
+ }
+
+ ret = amlogic_thermal_initialize(pdata);
+ if (ret)
+ return ret;
+
+ ret = amlogic_thermal_enable(pdata);
+
+ return ret;
+}
+
+static int amlogic_thermal_remove(struct platform_device *pdev)
+{
+ struct amlogic_thermal *data = platform_get_drvdata(pdev);
+
+ return amlogic_thermal_disable(data);
+}
+
+static int __maybe_unused amlogic_thermal_suspend(struct device *dev)
+{
+ struct amlogic_thermal *data = dev_get_drvdata(dev);
+
+ return amlogic_thermal_disable(data);
+}
+
+static int __maybe_unused amlogic_thermal_resume(struct device *dev)
+{
+ struct amlogic_thermal *data = dev_get_drvdata(dev);
+
+ return amlogic_thermal_enable(data);
+}
+
+static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops,
+ amlogic_thermal_suspend, amlogic_thermal_resume);
+
+static struct platform_driver amlogic_thermal_driver = {
+ .driver = {
+ .name = "amlogic_thermal",
+ .pm = &amlogic_thermal_pm_ops,
+ .of_match_table = of_amlogic_thermal_match,
+ },
+ .probe = amlogic_thermal_probe,
+ .remove = amlogic_thermal_remove,
+};
+
+module_platform_driver(amlogic_thermal_driver);
+
+MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 6b9865c786ba..52569b27b426 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
+#include <linux/energy_model.h>
#include <trace/events/thermal.h>
@@ -38,19 +39,6 @@
*/
/**
- * struct freq_table - frequency table along with power entries
- * @frequency: frequency in KHz
- * @power: power in mW
- *
- * This structure is built when the cooling device registers and helps
- * in translating frequency to power and vice versa.
- */
-struct freq_table {
- u32 frequency;
- u32 power;
-};
-
-/**
* struct time_in_idle - Idle time stats
* @time: previous reading of the absolute time that this cpu was idle
* @timestamp: wall time of the last invocation of get_cpu_idle_time_us()
@@ -69,7 +57,7 @@ struct time_in_idle {
* cooling devices.
* @max_level: maximum cooling level. One less than total number of valid
* cpufreq frequencies.
- * @freq_table: Freq table in descending order of frequencies
+ * @em: Reference on the Energy Model of the device
* @cdev: thermal_cooling_device pointer to keep track of the
* registered cooling device.
* @policy: cpufreq policy.
@@ -84,7 +72,7 @@ struct cpufreq_cooling_device {
u32 last_load;
unsigned int cpufreq_state;
unsigned int max_level;
- struct freq_table *freq_table; /* In descending order */
+ struct em_perf_domain *em;
struct cpufreq_policy *policy;
struct list_head node;
struct time_in_idle *idle_time;
@@ -95,8 +83,7 @@ static DEFINE_IDA(cpufreq_ida);
static DEFINE_MUTEX(cooling_list_lock);
static LIST_HEAD(cpufreq_cdev_list);
-/* Below code defines functions to be used for cpufreq as cooling device */
-
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
/**
* get_level: Find the level for a particular frequency
* @cpufreq_cdev: cpufreq_cdev for which the property is required
@@ -107,114 +94,40 @@ static LIST_HEAD(cpufreq_cdev_list);
static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev,
unsigned int freq)
{
- struct freq_table *freq_table = cpufreq_cdev->freq_table;
- unsigned long level;
+ int i;
- for (level = 1; level <= cpufreq_cdev->max_level; level++)
- if (freq > freq_table[level].frequency)
+ for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) {
+ if (freq > cpufreq_cdev->em->table[i].frequency)
break;
-
- return level - 1;
-}
-
-/**
- * update_freq_table() - Update the freq table with power numbers
- * @cpufreq_cdev: the cpufreq cooling device in which to update the table
- * @capacitance: dynamic power coefficient for these cpus
- *
- * Update the freq table with power numbers. This table will be used in
- * cpu_power_to_freq() and cpu_freq_to_power() to convert between power and
- * frequency efficiently. Power is stored in mW, frequency in KHz. The
- * resulting table is in descending order.
- *
- * Return: 0 on success, -EINVAL if there are no OPPs for any CPUs,
- * or -ENOMEM if we run out of memory.
- */
-static int update_freq_table(struct cpufreq_cooling_device *cpufreq_cdev,
- u32 capacitance)
-{
- struct freq_table *freq_table = cpufreq_cdev->freq_table;
- struct dev_pm_opp *opp;
- struct device *dev = NULL;
- int num_opps = 0, cpu = cpufreq_cdev->policy->cpu, i;
-
- dev = get_cpu_device(cpu);
- if (unlikely(!dev)) {
- pr_warn("No cpu device for cpu %d\n", cpu);
- return -ENODEV;
}
- num_opps = dev_pm_opp_get_opp_count(dev);
- if (num_opps < 0)
- return num_opps;
-
- /*
- * The cpufreq table is also built from the OPP table and so the count
- * should match.
- */
- if (num_opps != cpufreq_cdev->max_level + 1) {
- dev_warn(dev, "Number of OPPs not matching with max_levels\n");
- return -EINVAL;
- }
-
- for (i = 0; i <= cpufreq_cdev->max_level; i++) {
- unsigned long freq = freq_table[i].frequency * 1000;
- u32 freq_mhz = freq_table[i].frequency / 1000;
- u64 power;
- u32 voltage_mv;
-
- /*
- * Find ceil frequency as 'freq' may be slightly lower than OPP
- * freq due to truncation while converting to kHz.
- */
- opp = dev_pm_opp_find_freq_ceil(dev, &freq);
- if (IS_ERR(opp)) {
- dev_err(dev, "failed to get opp for %lu frequency\n",
- freq);
- return -EINVAL;
- }
-
- voltage_mv = dev_pm_opp_get_voltage(opp) / 1000;
- dev_pm_opp_put(opp);
-
- /*
- * Do the multiplication with MHz and millivolt so as
- * to not overflow.
- */
- power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv;
- do_div(power, 1000000000);
-
- /* power is stored in mW */
- freq_table[i].power = power;
- }
-
- return 0;
+ return cpufreq_cdev->max_level - i - 1;
}
static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_cdev,
u32 freq)
{
int i;
- struct freq_table *freq_table = cpufreq_cdev->freq_table;
- for (i = 1; i <= cpufreq_cdev->max_level; i++)
- if (freq > freq_table[i].frequency)
+ for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) {
+ if (freq > cpufreq_cdev->em->table[i].frequency)
break;
+ }
- return freq_table[i - 1].power;
+ return cpufreq_cdev->em->table[i + 1].power;
}
static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev,
u32 power)
{
int i;
- struct freq_table *freq_table = cpufreq_cdev->freq_table;
- for (i = 1; i <= cpufreq_cdev->max_level; i++)
- if (power > freq_table[i].power)
+ for (i = cpufreq_cdev->max_level - 1; i >= 0; i--) {
+ if (power > cpufreq_cdev->em->table[i].power)
break;
+ }
- return freq_table[i - 1].frequency;
+ return cpufreq_cdev->em->table[i + 1].frequency;
}
/**
@@ -265,76 +178,6 @@ static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev,
return (raw_cpu_power * cpufreq_cdev->last_load) / 100;
}
-/* cpufreq cooling device callback functions are defined below */
-
-/**
- * cpufreq_get_max_state - callback function to get the max cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: fill this variable with the max cooling state.
- *
- * Callback for the thermal cooling device to return the cpufreq
- * max cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
- unsigned long *state)
-{
- struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
-
- *state = cpufreq_cdev->max_level;
- return 0;
-}
-
-/**
- * cpufreq_get_cur_state - callback function to get the current cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: fill this variable with the current cooling state.
- *
- * Callback for the thermal cooling device to return the cpufreq
- * current cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
- unsigned long *state)
-{
- struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
-
- *state = cpufreq_cdev->cpufreq_state;
-
- return 0;
-}
-
-/**
- * cpufreq_set_cur_state - callback function to set the current cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: set this variable to the current cooling state.
- *
- * Callback for the thermal cooling device to change the cpufreq
- * current cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
- unsigned long state)
-{
- struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
-
- /* Request state should be less than max_level */
- if (WARN_ON(state > cpufreq_cdev->max_level))
- return -EINVAL;
-
- /* Check if the old cooling action is same as new cooling action */
- if (cpufreq_cdev->cpufreq_state == state)
- return 0;
-
- cpufreq_cdev->cpufreq_state = state;
-
- return freq_qos_update_request(&cpufreq_cdev->qos_req,
- cpufreq_cdev->freq_table[state].frequency);
-}
-
/**
* cpufreq_get_requested_power() - get the current power
* @cdev: &thermal_cooling_device pointer
@@ -425,7 +268,7 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev,
struct thermal_zone_device *tz,
unsigned long state, u32 *power)
{
- unsigned int freq, num_cpus;
+ unsigned int freq, num_cpus, idx;
struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
/* Request state should be less than max_level */
@@ -434,7 +277,8 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev,
num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus);
- freq = cpufreq_cdev->freq_table[state].frequency;
+ idx = cpufreq_cdev->max_level - state;
+ freq = cpufreq_cdev->em->table[idx].frequency;
*power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus;
return 0;
@@ -479,43 +323,142 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev,
return 0;
}
-/* Bind cpufreq callbacks to thermal cooling device ops */
+static inline bool em_is_sane(struct cpufreq_cooling_device *cpufreq_cdev,
+ struct em_perf_domain *em) {
+ struct cpufreq_policy *policy;
+ unsigned int nr_levels;
-static struct thermal_cooling_device_ops cpufreq_cooling_ops = {
- .get_max_state = cpufreq_get_max_state,
- .get_cur_state = cpufreq_get_cur_state,
- .set_cur_state = cpufreq_set_cur_state,
-};
+ if (!em)
+ return false;
-static struct thermal_cooling_device_ops cpufreq_power_cooling_ops = {
- .get_max_state = cpufreq_get_max_state,
- .get_cur_state = cpufreq_get_cur_state,
- .set_cur_state = cpufreq_set_cur_state,
- .get_requested_power = cpufreq_get_requested_power,
- .state2power = cpufreq_state2power,
- .power2state = cpufreq_power2state,
-};
+ policy = cpufreq_cdev->policy;
+ if (!cpumask_equal(policy->related_cpus, to_cpumask(em->cpus))) {
+ pr_err("The span of pd %*pbl is misaligned with cpufreq policy %*pbl\n",
+ cpumask_pr_args(to_cpumask(em->cpus)),
+ cpumask_pr_args(policy->related_cpus));
+ return false;
+ }
-static unsigned int find_next_max(struct cpufreq_frequency_table *table,
- unsigned int prev_max)
+ nr_levels = cpufreq_cdev->max_level + 1;
+ if (em->nr_cap_states != nr_levels) {
+ pr_err("The number of cap states in pd %*pbl (%u) doesn't match the number of cooling levels (%u)\n",
+ cpumask_pr_args(to_cpumask(em->cpus)),
+ em->nr_cap_states, nr_levels);
+ return false;
+ }
+
+ return true;
+}
+#endif /* CONFIG_THERMAL_GOV_POWER_ALLOCATOR */
+
+static unsigned int get_state_freq(struct cpufreq_cooling_device *cpufreq_cdev,
+ unsigned long state)
{
- struct cpufreq_frequency_table *pos;
- unsigned int max = 0;
+ struct cpufreq_policy *policy;
+ unsigned long idx;
- cpufreq_for_each_valid_entry(pos, table) {
- if (pos->frequency > max && pos->frequency < prev_max)
- max = pos->frequency;
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
+ /* Use the Energy Model table if available */
+ if (cpufreq_cdev->em) {
+ idx = cpufreq_cdev->max_level - state;
+ return cpufreq_cdev->em->table[idx].frequency;
}
+#endif
+
+ /* Otherwise, fallback on the CPUFreq table */
+ policy = cpufreq_cdev->policy;
+ if (policy->freq_table_sorted == CPUFREQ_TABLE_SORTED_ASCENDING)
+ idx = cpufreq_cdev->max_level - state;
+ else
+ idx = state;
+
+ return policy->freq_table[idx].frequency;
+}
+
+/* cpufreq cooling device callback functions are defined below */
+
+/**
+ * cpufreq_get_max_state - callback function to get the max cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the max cooling state.
+ *
+ * Callback for the thermal cooling device to return the cpufreq
+ * max cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+
+ *state = cpufreq_cdev->max_level;
+ return 0;
+}
+
+/**
+ * cpufreq_get_cur_state - callback function to get the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the current cooling state.
+ *
+ * Callback for the thermal cooling device to return the cpufreq
+ * current cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
- return max;
+ *state = cpufreq_cdev->cpufreq_state;
+
+ return 0;
}
/**
+ * cpufreq_set_cur_state - callback function to set the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: set this variable to the current cooling state.
+ *
+ * Callback for the thermal cooling device to change the cpufreq
+ * current cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+
+ /* Request state should be less than max_level */
+ if (WARN_ON(state > cpufreq_cdev->max_level))
+ return -EINVAL;
+
+ /* Check if the old cooling action is same as new cooling action */
+ if (cpufreq_cdev->cpufreq_state == state)
+ return 0;
+
+ cpufreq_cdev->cpufreq_state = state;
+
+ return freq_qos_update_request(&cpufreq_cdev->qos_req,
+ get_state_freq(cpufreq_cdev, state));
+}
+
+/* Bind cpufreq callbacks to thermal cooling device ops */
+
+static struct thermal_cooling_device_ops cpufreq_cooling_ops = {
+ .get_max_state = cpufreq_get_max_state,
+ .get_cur_state = cpufreq_get_cur_state,
+ .set_cur_state = cpufreq_set_cur_state,
+};
+
+/**
* __cpufreq_cooling_register - helper function to create cpufreq cooling device
* @np: a valid struct device_node to the cooling device device tree node
* @policy: cpufreq policy
* Normally this should be same as cpufreq policy->related_cpus.
- * @capacitance: dynamic power coefficient for these cpus
+ * @em: Energy Model of the cpufreq policy
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
@@ -527,12 +470,13 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table,
*/
static struct thermal_cooling_device *
__cpufreq_cooling_register(struct device_node *np,
- struct cpufreq_policy *policy, u32 capacitance)
+ struct cpufreq_policy *policy,
+ struct em_perf_domain *em)
{
struct thermal_cooling_device *cdev;
struct cpufreq_cooling_device *cpufreq_cdev;
char dev_name[THERMAL_NAME_LENGTH];
- unsigned int freq, i, num_cpus;
+ unsigned int i, num_cpus;
struct device *dev;
int ret;
struct thermal_cooling_device_ops *cooling_ops;
@@ -573,51 +517,36 @@ __cpufreq_cooling_register(struct device_node *np,
/* max_level is an index, not a counter */
cpufreq_cdev->max_level = i - 1;
- cpufreq_cdev->freq_table = kmalloc_array(i,
- sizeof(*cpufreq_cdev->freq_table),
- GFP_KERNEL);
- if (!cpufreq_cdev->freq_table) {
- cdev = ERR_PTR(-ENOMEM);
- goto free_idle_time;
- }
-
ret = ida_simple_get(&cpufreq_ida, 0, 0, GFP_KERNEL);
if (ret < 0) {
cdev = ERR_PTR(ret);
- goto free_table;
+ goto free_idle_time;
}
cpufreq_cdev->id = ret;
snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
cpufreq_cdev->id);
- /* Fill freq-table in descending order of frequencies */
- for (i = 0, freq = -1; i <= cpufreq_cdev->max_level; i++) {
- freq = find_next_max(policy->freq_table, freq);
- cpufreq_cdev->freq_table[i].frequency = freq;
-
- /* Warn for duplicate entries */
- if (!freq)
- pr_warn("%s: table has duplicate entries\n", __func__);
- else
- pr_debug("%s: freq:%u KHz\n", __func__, freq);
- }
-
- if (capacitance) {
- ret = update_freq_table(cpufreq_cdev, capacitance);
- if (ret) {
- cdev = ERR_PTR(ret);
- goto remove_ida;
- }
-
- cooling_ops = &cpufreq_power_cooling_ops;
- } else {
- cooling_ops = &cpufreq_cooling_ops;
+ cooling_ops = &cpufreq_cooling_ops;
+
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
+ if (em_is_sane(cpufreq_cdev, em)) {
+ cpufreq_cdev->em = em;
+ cooling_ops->get_requested_power = cpufreq_get_requested_power;
+ cooling_ops->state2power = cpufreq_state2power;
+ cooling_ops->power2state = cpufreq_power2state;
+ } else
+#endif
+ if (policy->freq_table_sorted == CPUFREQ_TABLE_UNSORTED) {
+ pr_err("%s: unsorted frequency tables are not supported\n",
+ __func__);
+ cdev = ERR_PTR(-EINVAL);
+ goto remove_ida;
}
ret = freq_qos_add_request(&policy->constraints,
&cpufreq_cdev->qos_req, FREQ_QOS_MAX,
- cpufreq_cdev->freq_table[0].frequency);
+ get_state_freq(cpufreq_cdev, 0));
if (ret < 0) {
pr_err("%s: Failed to add freq constraint (%d)\n", __func__,
ret);
@@ -640,8 +569,6 @@ remove_qos_req:
freq_qos_remove_request(&cpufreq_cdev->qos_req);
remove_ida:
ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
-free_table:
- kfree(cpufreq_cdev->freq_table);
free_idle_time:
kfree(cpufreq_cdev->idle_time);
free_cdev:
@@ -663,7 +590,7 @@ free_cdev:
struct thermal_cooling_device *
cpufreq_cooling_register(struct cpufreq_policy *policy)
{
- return __cpufreq_cooling_register(NULL, policy, 0);
+ return __cpufreq_cooling_register(NULL, policy, NULL);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
@@ -691,7 +618,6 @@ of_cpufreq_cooling_register(struct cpufreq_policy *policy)
{
struct device_node *np = of_get_cpu_node(policy->cpu, NULL);
struct thermal_cooling_device *cdev = NULL;
- u32 capacitance = 0;
if (!np) {
pr_err("cpu_cooling: OF node not available for cpu%d\n",
@@ -700,10 +626,9 @@ of_cpufreq_cooling_register(struct cpufreq_policy *policy)
}
if (of_find_property(np, "#cooling-cells", NULL)) {
- of_property_read_u32(np, "dynamic-power-coefficient",
- &capacitance);
+ struct em_perf_domain *em = em_cpu_get(policy->cpu);
- cdev = __cpufreq_cooling_register(np, policy, capacitance);
+ cdev = __cpufreq_cooling_register(np, policy, em);
if (IS_ERR(cdev)) {
pr_err("cpu_cooling: cpu%d failed to register as cooling device: %ld\n",
policy->cpu, PTR_ERR(cdev));
@@ -739,7 +664,6 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
freq_qos_remove_request(&cpufreq_cdev->qos_req);
ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
kfree(cpufreq_cdev->idle_time);
- kfree(cpufreq_cdev->freq_table);
kfree(cpufreq_cdev);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index e46a4e3f25c4..fb77acb8d13b 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -245,11 +245,11 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
return adc_code * slope + offset;
}
-static int get_temp_8960(struct tsens_priv *priv, int id, int *temp)
+static int get_temp_8960(struct tsens_sensor *s, int *temp)
{
int ret;
u32 code, trdy;
- const struct tsens_sensor *s = &priv->sensor[id];
+ struct tsens_priv *priv = s->priv;
unsigned long timeout;
timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 528df8801254..c8d57ee0a5bb 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -3,6 +3,7 @@
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/nvmem-consumer.h>
@@ -12,6 +13,31 @@
#include <linux/regmap.h>
#include "tsens.h"
+/**
+ * struct tsens_irq_data - IRQ status and temperature violations
+ * @up_viol: upper threshold violated
+ * @up_thresh: upper threshold temperature value
+ * @up_irq_mask: mask register for upper threshold irqs
+ * @up_irq_clear: clear register for uppper threshold irqs
+ * @low_viol: lower threshold violated
+ * @low_thresh: lower threshold temperature value
+ * @low_irq_mask: mask register for lower threshold irqs
+ * @low_irq_clear: clear register for lower threshold irqs
+ *
+ * Structure containing data about temperature threshold settings and
+ * irq status if they were violated.
+ */
+struct tsens_irq_data {
+ u32 up_viol;
+ int up_thresh;
+ u32 up_irq_mask;
+ u32 up_irq_clear;
+ u32 low_viol;
+ int low_thresh;
+ u32 low_irq_mask;
+ u32 low_irq_clear;
+};
+
char *qfprom_read(struct device *dev, const char *cname)
{
struct nvmem_cell *cell;
@@ -42,8 +68,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
for (i = 0; i < priv->num_sensors; i++) {
dev_dbg(priv->dev,
- "sensor%d - data_point1:%#x data_point2:%#x\n",
- i, p1[i], p2[i]);
+ "%s: sensor%d - data_point1:%#x data_point2:%#x\n",
+ __func__, i, p1[i], p2[i]);
priv->sensor[i].slope = SLOPE_DEFAULT;
if (mode == TWO_PT_CALIB) {
@@ -60,10 +86,18 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
(CAL_DEGC_PT1 *
priv->sensor[i].slope);
- dev_dbg(priv->dev, "offset:%d\n", priv->sensor[i].offset);
+ dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset);
}
}
+static inline u32 degc_to_code(int degc, const struct tsens_sensor *s)
+{
+ u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR);
+
+ pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc);
+ return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE);
+}
+
static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
{
int degc, num, den;
@@ -83,12 +117,353 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
return degc;
}
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
+/**
+ * tsens_hw_to_mC - Return sign-extended temperature in mCelsius.
+ * @s: Pointer to sensor struct
+ * @field: Index into regmap_field array pointing to temperature data
+ *
+ * This function handles temperature returned in ADC code or deciCelsius
+ * depending on IP version.
+ *
+ * Return: Temperature in milliCelsius on success, a negative errno will
+ * be returned in error cases
+ */
+static int tsens_hw_to_mC(struct tsens_sensor *s, int field)
+{
+ struct tsens_priv *priv = s->priv;
+ u32 resolution;
+ u32 temp = 0;
+ int ret;
+
+ resolution = priv->fields[LAST_TEMP_0].msb -
+ priv->fields[LAST_TEMP_0].lsb;
+
+ ret = regmap_field_read(priv->rf[field], &temp);
+ if (ret)
+ return ret;
+
+ /* Convert temperature from ADC code to milliCelsius */
+ if (priv->feat->adc)
+ return code_to_degc(temp, s) * 1000;
+
+ /* deciCelsius -> milliCelsius along with sign extension */
+ return sign_extend32(temp, resolution) * 100;
+}
+
+/**
+ * tsens_mC_to_hw - Convert temperature to hardware register value
+ * @s: Pointer to sensor struct
+ * @temp: temperature in milliCelsius to be programmed to hardware
+ *
+ * This function outputs the value to be written to hardware in ADC code
+ * or deciCelsius depending on IP version.
+ *
+ * Return: ADC code or temperature in deciCelsius.
+ */
+static int tsens_mC_to_hw(struct tsens_sensor *s, int temp)
+{
+ struct tsens_priv *priv = s->priv;
+
+ /* milliC to adc code */
+ if (priv->feat->adc)
+ return degc_to_code(temp / 1000, s);
+
+ /* milliC to deciC */
+ return temp / 100;
+}
+
+static inline enum tsens_ver tsens_version(struct tsens_priv *priv)
+{
+ return priv->feat->ver_major;
+}
+
+static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id,
+ enum tsens_irq_type irq_type, bool enable)
+{
+ u32 index = 0;
+
+ switch (irq_type) {
+ case UPPER:
+ index = UP_INT_CLEAR_0 + hw_id;
+ break;
+ case LOWER:
+ index = LOW_INT_CLEAR_0 + hw_id;
+ break;
+ }
+ regmap_field_write(priv->rf[index], enable ? 0 : 1);
+}
+
+static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id,
+ enum tsens_irq_type irq_type, bool enable)
+{
+ u32 index_mask = 0, index_clear = 0;
+
+ /*
+ * To enable the interrupt flag for a sensor:
+ * - clear the mask bit
+ * To disable the interrupt flag for a sensor:
+ * - Mask further interrupts for this sensor
+ * - Write 1 followed by 0 to clear the interrupt
+ */
+ switch (irq_type) {
+ case UPPER:
+ index_mask = UP_INT_MASK_0 + hw_id;
+ index_clear = UP_INT_CLEAR_0 + hw_id;
+ break;
+ case LOWER:
+ index_mask = LOW_INT_MASK_0 + hw_id;
+ index_clear = LOW_INT_CLEAR_0 + hw_id;
+ break;
+ }
+
+ if (enable) {
+ regmap_field_write(priv->rf[index_mask], 0);
+ } else {
+ regmap_field_write(priv->rf[index_mask], 1);
+ regmap_field_write(priv->rf[index_clear], 1);
+ regmap_field_write(priv->rf[index_clear], 0);
+ }
+}
+
+/**
+ * tsens_set_interrupt - Set state of an interrupt
+ * @priv: Pointer to tsens controller private data
+ * @hw_id: Hardware ID aka. sensor number
+ * @irq_type: irq_type from enum tsens_irq_type
+ * @enable: false = disable, true = enable
+ *
+ * Call IP-specific function to set state of an interrupt
+ *
+ * Return: void
+ */
+static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id,
+ enum tsens_irq_type irq_type, bool enable)
+{
+ dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__,
+ irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW",
+ enable ? "en" : "dis");
+ if (tsens_version(priv) > VER_1_X)
+ tsens_set_interrupt_v2(priv, hw_id, irq_type, enable);
+ else
+ tsens_set_interrupt_v1(priv, hw_id, irq_type, enable);
+}
+
+/**
+ * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold
+ * @priv: Pointer to tsens controller private data
+ * @hw_id: Hardware ID aka. sensor number
+ * @d: Pointer to irq state data
+ *
+ * Return: 0 if threshold was not violated, 1 if it was violated and negative
+ * errno in case of errors
+ */
+static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id,
+ struct tsens_irq_data *d)
{
- struct tsens_sensor *s = &priv->sensor[i];
- u32 temp_idx = LAST_TEMP_0 + s->hw_id;
- u32 valid_idx = VALID_0 + s->hw_id;
- u32 last_temp = 0, valid, mask;
+ int ret;
+
+ ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol);
+ if (ret)
+ return ret;
+ if (d->up_viol || d->low_viol)
+ return 1;
+
+ return 0;
+}
+
+static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id,
+ struct tsens_sensor *s, struct tsens_irq_data *d)
+{
+ int ret;
+
+ ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear);
+ if (ret)
+ return ret;
+ if (tsens_version(priv) > VER_1_X) {
+ ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask);
+ if (ret)
+ return ret;
+ } else {
+ /* No mask register on older TSENS */
+ d->up_irq_mask = 0;
+ d->low_irq_mask = 0;
+ }
+
+ d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id);
+ d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id);
+
+ dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u) | clr(%u|%u) | mask(%u|%u)\n",
+ hw_id, __func__, (d->up_viol || d->low_viol) ? "(V)" : "",
+ d->low_viol, d->up_viol, d->low_irq_clear, d->up_irq_clear,
+ d->low_irq_mask, d->up_irq_mask);
+ dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d)\n", hw_id, __func__,
+ (d->up_viol || d->low_viol) ? "(violation)" : "",
+ d->low_thresh, d->up_thresh);
+
+ return 0;
+}
+
+static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver)
+{
+ if (ver > VER_1_X)
+ return mask & (1 << hw_id);
+
+ /* v1, v0.1 don't have a irq mask register */
+ return 0;
+}
+
+/**
+ * tsens_irq_thread - Threaded interrupt handler for uplow interrupts
+ * @irq: irq number
+ * @data: tsens controller private data
+ *
+ * Check all sensors to find ones that violated their threshold limits. If the
+ * temperature is still outside the limits, call thermal_zone_device_update() to
+ * update the thresholds, else re-enable the interrupts.
+ *
+ * The level-triggered interrupt might deassert if the temperature returned to
+ * within the threshold limits by the time the handler got scheduled. We
+ * consider the irq to have been handled in that case.
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t tsens_irq_thread(int irq, void *data)
+{
+ struct tsens_priv *priv = data;
+ struct tsens_irq_data d;
+ bool enable = true, disable = false;
+ unsigned long flags;
+ int temp, ret, i;
+
+ for (i = 0; i < priv->num_sensors; i++) {
+ bool trigger = false;
+ struct tsens_sensor *s = &priv->sensor[i];
+ u32 hw_id = s->hw_id;
+
+ if (IS_ERR(priv->sensor[i].tzd))
+ continue;
+ if (!tsens_threshold_violated(priv, hw_id, &d))
+ continue;
+ ret = get_temp_tsens_valid(s, &temp);
+ if (ret) {
+ dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__);
+ continue;
+ }
+
+ spin_lock_irqsave(&priv->ul_lock, flags);
+
+ tsens_read_irq_state(priv, hw_id, s, &d);
+
+ if (d.up_viol &&
+ !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) {
+ tsens_set_interrupt(priv, hw_id, UPPER, disable);
+ if (d.up_thresh > temp) {
+ dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
+ priv->sensor[i].hw_id, __func__);
+ tsens_set_interrupt(priv, hw_id, UPPER, enable);
+ } else {
+ trigger = true;
+ /* Keep irq masked */
+ }
+ } else if (d.low_viol &&
+ !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) {
+ tsens_set_interrupt(priv, hw_id, LOWER, disable);
+ if (d.low_thresh < temp) {
+ dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
+ priv->sensor[i].hw_id, __func__);
+ tsens_set_interrupt(priv, hw_id, LOWER, enable);
+ } else {
+ trigger = true;
+ /* Keep irq masked */
+ }
+ }
+
+ spin_unlock_irqrestore(&priv->ul_lock, flags);
+
+ if (trigger) {
+ dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
+ hw_id, __func__, temp);
+ thermal_zone_device_update(priv->sensor[i].tzd,
+ THERMAL_EVENT_UNSPECIFIED);
+ } else {
+ dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
+ hw_id, __func__, temp);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+int tsens_set_trips(void *_sensor, int low, int high)
+{
+ struct tsens_sensor *s = _sensor;
+ struct tsens_priv *priv = s->priv;
+ struct device *dev = priv->dev;
+ struct tsens_irq_data d;
+ unsigned long flags;
+ int high_val, low_val, cl_high, cl_low;
+ u32 hw_id = s->hw_id;
+
+ dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
+ hw_id, __func__, low, high);
+
+ cl_high = clamp_val(high, -40000, 120000);
+ cl_low = clamp_val(low, -40000, 120000);
+
+ high_val = tsens_mC_to_hw(s, cl_high);
+ low_val = tsens_mC_to_hw(s, cl_low);
+
+ spin_lock_irqsave(&priv->ul_lock, flags);
+
+ tsens_read_irq_state(priv, hw_id, s, &d);
+
+ /* Write the new thresholds and clear the status */
+ regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val);
+ regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val);
+ tsens_set_interrupt(priv, hw_id, LOWER, true);
+ tsens_set_interrupt(priv, hw_id, UPPER, true);
+
+ spin_unlock_irqrestore(&priv->ul_lock, flags);
+
+ dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n",
+ s->hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
+
+ return 0;
+}
+
+int tsens_enable_irq(struct tsens_priv *priv)
+{
+ int ret;
+ int val = tsens_version(priv) > VER_1_X ? 7 : 1;
+
+ ret = regmap_field_write(priv->rf[INT_EN], val);
+ if (ret < 0)
+ dev_err(priv->dev, "%s: failed to enable interrupts\n", __func__);
+
+ return ret;
+}
+
+void tsens_disable_irq(struct tsens_priv *priv)
+{
+ regmap_field_write(priv->rf[INT_EN], 0);
+}
+
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
+{
+ struct tsens_priv *priv = s->priv;
+ int hw_id = s->hw_id;
+ u32 temp_idx = LAST_TEMP_0 + hw_id;
+ u32 valid_idx = VALID_0 + hw_id;
+ u32 valid;
int ret;
ret = regmap_field_read(priv->rf[valid_idx], &valid);
@@ -106,29 +481,18 @@ int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
}
/* Valid bit is set, OK to read the temperature */
- ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
- if (ret)
- return ret;
-
- if (priv->feat->adc) {
- /* Convert temperature from ADC code to milliCelsius */
- *temp = code_to_degc(last_temp, s) * 1000;
- } else {
- mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
- priv->fields[LAST_TEMP_0].lsb);
- /* Convert temperature from deciCelsius to milliCelsius */
- *temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
- }
+ *temp = tsens_hw_to_mC(s, temp_idx);
return 0;
}
-int get_temp_common(struct tsens_priv *priv, int i, int *temp)
+int get_temp_common(struct tsens_sensor *s, int *temp)
{
- struct tsens_sensor *s = &priv->sensor[i];
+ struct tsens_priv *priv = s->priv;
+ int hw_id = s->hw_id;
int last_temp = 0, ret;
- ret = regmap_field_read(priv->rf[LAST_TEMP_0 + s->hw_id], &last_temp);
+ ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
if (ret)
return ret;
@@ -137,6 +501,77 @@ int get_temp_common(struct tsens_priv *priv, int i, int *temp)
return 0;
}
+#ifdef CONFIG_DEBUG_FS
+static int dbg_sensors_show(struct seq_file *s, void *data)
+{
+ struct platform_device *pdev = s->private;
+ struct tsens_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ seq_printf(s, "max: %2d\nnum: %2d\n\n",
+ priv->feat->max_sensors, priv->num_sensors);
+
+ seq_puts(s, " id slope offset\n--------------------------\n");
+ for (i = 0; i < priv->num_sensors; i++) {
+ seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id,
+ priv->sensor[i].slope, priv->sensor[i].offset);
+ }
+
+ return 0;
+}
+
+static int dbg_version_show(struct seq_file *s, void *data)
+{
+ struct platform_device *pdev = s->private;
+ struct tsens_priv *priv = platform_get_drvdata(pdev);
+ u32 maj_ver, min_ver, step_ver;
+ int ret;
+
+ if (tsens_version(priv) > VER_0_1) {
+ ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(priv->rf[VER_STEP], &step_ver);
+ if (ret)
+ return ret;
+ seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
+ } else {
+ seq_puts(s, "0.1.0\n");
+ }
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dbg_version);
+DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
+
+static void tsens_debug_init(struct platform_device *pdev)
+{
+ struct tsens_priv *priv = platform_get_drvdata(pdev);
+ struct dentry *root, *file;
+
+ root = debugfs_lookup("tsens", NULL);
+ if (!root)
+ priv->debug_root = debugfs_create_dir("tsens", NULL);
+ else
+ priv->debug_root = root;
+
+ file = debugfs_lookup("version", priv->debug_root);
+ if (!file)
+ debugfs_create_file("version", 0444, priv->debug_root,
+ pdev, &dbg_version_fops);
+
+ /* A directory for each instance of the TSENS IP */
+ priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
+ debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
+}
+#else
+static inline void tsens_debug_init(struct platform_device *pdev) {}
+#endif
+
static const struct regmap_config tsens_config = {
.name = "tm",
.reg_bits = 32,
@@ -197,6 +632,15 @@ int __init init_common(struct tsens_priv *priv)
goto err_put_device;
}
+ if (tsens_version(priv) > VER_0_1) {
+ for (i = VER_MAJOR; i <= VER_STEP; i++) {
+ priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
+ priv->fields[i]);
+ if (IS_ERR(priv->rf[i]))
+ return PTR_ERR(priv->rf[i]);
+ }
+ }
+
priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[TSENS_EN]);
if (IS_ERR(priv->rf[TSENS_EN])) {
@@ -207,7 +651,7 @@ int __init init_common(struct tsens_priv *priv)
if (ret)
goto err_put_device;
if (!enabled) {
- dev_err(dev, "tsens device is not enabled\n");
+ dev_err(dev, "%s: device not enabled\n", __func__);
ret = -ENODEV;
goto err_put_device;
}
@@ -218,24 +662,31 @@ int __init init_common(struct tsens_priv *priv)
ret = PTR_ERR(priv->rf[SENSOR_EN]);
goto err_put_device;
}
- /* now alloc regmap_fields in tm_map */
- for (i = 0, j = LAST_TEMP_0; i < priv->feat->max_sensors; i++, j++) {
- priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
- priv->fields[j]);
- if (IS_ERR(priv->rf[j])) {
- ret = PTR_ERR(priv->rf[j]);
- goto err_put_device;
- }
+ priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map,
+ priv->fields[INT_EN]);
+ if (IS_ERR(priv->rf[INT_EN])) {
+ ret = PTR_ERR(priv->rf[INT_EN]);
+ goto err_put_device;
}
- for (i = 0, j = VALID_0; i < priv->feat->max_sensors; i++, j++) {
- priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
- priv->fields[j]);
- if (IS_ERR(priv->rf[j])) {
- ret = PTR_ERR(priv->rf[j]);
- goto err_put_device;
+
+ /* This loop might need changes if enum regfield_ids is reordered */
+ for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
+ for (i = 0; i < priv->feat->max_sensors; i++) {
+ int idx = j + i;
+
+ priv->rf[idx] = devm_regmap_field_alloc(dev, priv->tm_map,
+ priv->fields[idx]);
+ if (IS_ERR(priv->rf[idx])) {
+ ret = PTR_ERR(priv->rf[idx]);
+ goto err_put_device;
+ }
}
}
+ spin_lock_init(&priv->ul_lock);
+ tsens_enable_irq(priv);
+ tsens_debug_init(op);
+
return 0;
err_put_device:
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 055647bcee67..4b8dd6de02ce 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -347,9 +347,20 @@ static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
/* INTERRUPT ENABLE */
[INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
+ /* UPPER/LOWER TEMPERATURE THRESHOLDS */
+ REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9),
+ REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+
+ /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
+ REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+ REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+
+ /* NO CRITICAL INTERRUPT SUPPORT on v0.1 */
+
/* Sn_STATUS */
REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9),
/* No VALID field on v0.1 */
+ /* xxx_STATUS bits: 1 == threshold violated */
REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10),
REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 870f502f2cb6..bd2ddb684a45 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -6,6 +6,7 @@
#include <linux/bitops.h>
#include <linux/regmap.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "tsens.h"
/* ----- SROT ------ */
@@ -17,6 +18,70 @@
#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004
#define TM_Sn_STATUS_OFF 0x0044
#define TM_TRDY_OFF 0x0084
+#define TM_HIGH_LOW_INT_STATUS_OFF 0x0088
+#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090
+
+/* eeprom layout data for msm8956/76 (v1) */
+#define MSM8976_BASE0_MASK 0xff
+#define MSM8976_BASE1_MASK 0xff
+#define MSM8976_BASE1_SHIFT 8
+
+#define MSM8976_S0_P1_MASK 0x3f00
+#define MSM8976_S1_P1_MASK 0x3f00000
+#define MSM8976_S2_P1_MASK 0x3f
+#define MSM8976_S3_P1_MASK 0x3f000
+#define MSM8976_S4_P1_MASK 0x3f00
+#define MSM8976_S5_P1_MASK 0x3f00000
+#define MSM8976_S6_P1_MASK 0x3f
+#define MSM8976_S7_P1_MASK 0x3f000
+#define MSM8976_S8_P1_MASK 0x1f8
+#define MSM8976_S9_P1_MASK 0x1f8000
+#define MSM8976_S10_P1_MASK 0xf8000000
+#define MSM8976_S10_P1_MASK_1 0x1
+
+#define MSM8976_S0_P2_MASK 0xfc000
+#define MSM8976_S1_P2_MASK 0xfc000000
+#define MSM8976_S2_P2_MASK 0xfc0
+#define MSM8976_S3_P2_MASK 0xfc0000
+#define MSM8976_S4_P2_MASK 0xfc000
+#define MSM8976_S5_P2_MASK 0xfc000000
+#define MSM8976_S6_P2_MASK 0xfc0
+#define MSM8976_S7_P2_MASK 0xfc0000
+#define MSM8976_S8_P2_MASK 0x7e00
+#define MSM8976_S9_P2_MASK 0x7e00000
+#define MSM8976_S10_P2_MASK 0x7e
+
+#define MSM8976_S0_P1_SHIFT 8
+#define MSM8976_S1_P1_SHIFT 20
+#define MSM8976_S2_P1_SHIFT 0
+#define MSM8976_S3_P1_SHIFT 12
+#define MSM8976_S4_P1_SHIFT 8
+#define MSM8976_S5_P1_SHIFT 20
+#define MSM8976_S6_P1_SHIFT 0
+#define MSM8976_S7_P1_SHIFT 12
+#define MSM8976_S8_P1_SHIFT 3
+#define MSM8976_S9_P1_SHIFT 15
+#define MSM8976_S10_P1_SHIFT 27
+#define MSM8976_S10_P1_SHIFT_1 0
+
+#define MSM8976_S0_P2_SHIFT 14
+#define MSM8976_S1_P2_SHIFT 26
+#define MSM8976_S2_P2_SHIFT 6
+#define MSM8976_S3_P2_SHIFT 18
+#define MSM8976_S4_P2_SHIFT 14
+#define MSM8976_S5_P2_SHIFT 26
+#define MSM8976_S6_P2_SHIFT 6
+#define MSM8976_S7_P2_SHIFT 18
+#define MSM8976_S8_P2_SHIFT 9
+#define MSM8976_S9_P2_SHIFT 21
+#define MSM8976_S10_P2_SHIFT 1
+
+#define MSM8976_CAL_SEL_MASK 0x3
+
+#define MSM8976_CAL_DEGC_PT1 30
+#define MSM8976_CAL_DEGC_PT2 120
+#define MSM8976_SLOPE_FACTOR 1000
+#define MSM8976_SLOPE_DEFAULT 3200
/* eeprom layout data for qcs404/405 (v1) */
#define BASE0_MASK 0x000007f8
@@ -77,6 +142,30 @@
#define CAL_SEL_MASK 7
#define CAL_SEL_SHIFT 0
+static void compute_intercept_slope_8976(struct tsens_priv *priv,
+ u32 *p1, u32 *p2, u32 mode)
+{
+ int i;
+
+ priv->sensor[0].slope = 3313;
+ priv->sensor[1].slope = 3275;
+ priv->sensor[2].slope = 3320;
+ priv->sensor[3].slope = 3246;
+ priv->sensor[4].slope = 3279;
+ priv->sensor[5].slope = 3257;
+ priv->sensor[6].slope = 3234;
+ priv->sensor[7].slope = 3269;
+ priv->sensor[8].slope = 3255;
+ priv->sensor[9].slope = 3239;
+ priv->sensor[10].slope = 3286;
+
+ for (i = 0; i < priv->num_sensors; i++) {
+ priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) -
+ (MSM8976_CAL_DEGC_PT1 *
+ priv->sensor[i].slope);
+ }
+}
+
static int calibrate_v1(struct tsens_priv *priv)
{
u32 base0 = 0, base1 = 0;
@@ -143,7 +232,72 @@ static int calibrate_v1(struct tsens_priv *priv)
return 0;
}
-/* v1.x: qcs404,405 */
+static int calibrate_8976(struct tsens_priv *priv)
+{
+ int base0 = 0, base1 = 0, i;
+ u32 p1[11], p2[11];
+ int mode = 0, tmp = 0;
+ u32 *qfprom_cdata;
+
+ qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK);
+ dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT;
+ p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT;
+ p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT;
+ p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT;
+ p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT;
+ p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT;
+ p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT;
+ p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT;
+ p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT;
+ p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT;
+ p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT;
+ p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT;
+
+ for (i = 0; i < priv->num_sensors; i++)
+ p2[i] = ((base1 + p2[i]) << 2);
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK;
+ p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT;
+ p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT;
+ p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT;
+ p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT;
+ p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT;
+ p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT;
+ p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT;
+ p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT;
+ p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT;
+ p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT;
+ p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT;
+ tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1;
+ p1[10] |= tmp;
+
+ for (i = 0; i < priv->num_sensors; i++)
+ p1[i] = (((base0) + p1[i]) << 2);
+ break;
+ default:
+ for (i = 0; i < priv->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope_8976(priv, p1, p2, mode);
+ kfree(qfprom_cdata);
+
+ return 0;
+}
+
+/* v1.x: msm8956,8976,qcs404,405 */
static const struct tsens_features tsens_v1_feat = {
.ver_major = VER_1_X,
@@ -168,9 +322,36 @@ static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
/* INTERRUPT ENABLE */
[INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
+ /* UPPER/LOWER TEMPERATURE THRESHOLDS */
+ REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9),
+ REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+
+ /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
+ REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+ REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+ [LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 0, 0),
+ [LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 1, 1),
+ [LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 2, 2),
+ [LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 3, 3),
+ [LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 4, 4),
+ [LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 5, 5),
+ [LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 6, 6),
+ [LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 7, 7),
+ [UP_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 8, 8),
+ [UP_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 9, 9),
+ [UP_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10),
+ [UP_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11),
+ [UP_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12),
+ [UP_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13),
+ [UP_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14),
+ [UP_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15),
+
+ /* NO CRITICAL INTERRUPT SUPPORT on v1 */
+
/* Sn_STATUS */
REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9),
REG_FIELD_FOR_EACH_SENSOR11(VALID, TM_Sn_STATUS_OFF, 14, 14),
+ /* xxx_STATUS bits: 1 == threshold violated */
REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10),
REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
@@ -192,3 +373,18 @@ const struct tsens_plat_data data_tsens_v1 = {
.feat = &tsens_v1_feat,
.fields = tsens_v1_regfields,
};
+
+static const struct tsens_ops ops_8976 = {
+ .init = init_common,
+ .calibrate = calibrate_8976,
+ .get_temp = get_temp_tsens_valid,
+};
+
+/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
+const struct tsens_plat_data data_8976 = {
+ .num_sensors = 11,
+ .ops = &ops_8976,
+ .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
+ .feat = &tsens_v1_feat,
+ .fields = tsens_v1_regfields,
+};
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 0a4f2b8fcab6..a4d15e1abfdd 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -50,9 +50,22 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
/* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */
[INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 2),
+ /* TEMPERATURE THRESHOLDS */
+ REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 0, 11),
+ REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12, 23),
+
+ /* INTERRUPTS [CLEAR/STATUS/MASK] */
+ REG_FIELD_SPLIT_BITS_0_15(LOW_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF),
+ REG_FIELD_SPLIT_BITS_0_15(LOW_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF),
+ REG_FIELD_SPLIT_BITS_0_15(LOW_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF),
+ REG_FIELD_SPLIT_BITS_16_31(UP_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF),
+ REG_FIELD_SPLIT_BITS_16_31(UP_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF),
+ REG_FIELD_SPLIT_BITS_16_31(UP_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF),
+
/* Sn_STATUS */
REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11),
REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21),
+ /* xxx_STATUS bits: 1 == threshold violated */
REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS, TM_Sn_STATUS_OFF, 16, 16),
REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 17, 17),
REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 18, 18),
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 0627d8615c30..015e7d201598 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -3,9 +3,11 @@
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -14,19 +16,19 @@
static int tsens_get_temp(void *data, int *temp)
{
- const struct tsens_sensor *s = data;
+ struct tsens_sensor *s = data;
struct tsens_priv *priv = s->priv;
- return priv->ops->get_temp(priv, s->id, temp);
+ return priv->ops->get_temp(s, temp);
}
static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
{
- const struct tsens_sensor *s = data;
+ struct tsens_sensor *s = data;
struct tsens_priv *priv = s->priv;
if (priv->ops->get_trend)
- return priv->ops->get_trend(priv, s->id, trend);
+ return priv->ops->get_trend(s, trend);
return -ENOTSUPP;
}
@@ -61,6 +63,9 @@ static const struct of_device_id tsens_table[] = {
.compatible = "qcom,msm8974-tsens",
.data = &data_8974,
}, {
+ .compatible = "qcom,msm8976-tsens",
+ .data = &data_8976,
+ }, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
}, {
@@ -77,17 +82,18 @@ MODULE_DEVICE_TABLE(of, tsens_table);
static const struct thermal_zone_of_device_ops tsens_of_ops = {
.get_temp = tsens_get_temp,
.get_trend = tsens_get_trend,
+ .set_trips = tsens_set_trips,
};
static int tsens_register(struct tsens_priv *priv)
{
- int i;
+ int i, ret, irq;
struct thermal_zone_device *tzd;
+ struct platform_device *pdev;
for (i = 0; i < priv->num_sensors; i++) {
priv->sensor[i].priv = priv;
- priv->sensor[i].id = i;
- tzd = devm_thermal_zone_of_sensor_register(priv->dev, i,
+ tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id,
&priv->sensor[i],
&tsens_of_ops);
if (IS_ERR(tzd))
@@ -96,7 +102,31 @@ static int tsens_register(struct tsens_priv *priv)
if (priv->ops->enable)
priv->ops->enable(priv, i);
}
- return 0;
+
+ pdev = of_find_device_by_node(priv->dev->of_node);
+ if (!pdev)
+ return -ENODEV;
+
+ irq = platform_get_irq_byname(pdev, "uplow");
+ if (irq < 0) {
+ ret = irq;
+ goto err_put_device;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, tsens_irq_thread,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ dev_name(&pdev->dev), priv);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: failed to get irq\n", __func__);
+ goto err_put_device;
+ }
+
+ enable_irq_wake(irq);
+
+err_put_device:
+ put_device(&pdev->dev);
+ return ret;
}
static int tsens_probe(struct platform_device *pdev)
@@ -128,7 +158,7 @@ static int tsens_probe(struct platform_device *pdev)
of_property_read_u32(np, "#qcom,sensors", &num_sensors);
if (num_sensors <= 0) {
- dev_err(dev, "invalid number of sensors\n");
+ dev_err(dev, "%s: invalid number of sensors\n", __func__);
return -EINVAL;
}
@@ -150,12 +180,14 @@ static int tsens_probe(struct platform_device *pdev)
priv->feat = data->feat;
priv->fields = data->fields;
+ platform_set_drvdata(pdev, priv);
+
if (!priv->ops || !priv->ops->init || !priv->ops->get_temp)
return -EINVAL;
ret = priv->ops->init(priv);
if (ret < 0) {
- dev_err(dev, "tsens init failed\n");
+ dev_err(dev, "%s: init failed\n", __func__);
return ret;
}
@@ -163,22 +195,20 @@ static int tsens_probe(struct platform_device *pdev)
ret = priv->ops->calibrate(priv);
if (ret < 0) {
if (ret != -EPROBE_DEFER)
- dev_err(dev, "tsens calibration failed\n");
+ dev_err(dev, "%s: calibration failed\n", __func__);
return ret;
}
}
- ret = tsens_register(priv);
-
- platform_set_drvdata(pdev, priv);
-
- return ret;
+ return tsens_register(priv);
}
static int tsens_remove(struct platform_device *pdev)
{
struct tsens_priv *priv = platform_get_drvdata(pdev);
+ debugfs_remove_recursive(priv->debug_root);
+ tsens_disable_irq(priv);
if (priv->ops->disable)
priv->ops->disable(priv);
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index b89083b61c38..e24a865fbc34 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -13,8 +13,10 @@
#define CAL_DEGC_PT2 120
#define SLOPE_FACTOR 1000
#define SLOPE_DEFAULT 3200
+#define THRESHOLD_MAX_ADC_CODE 0x3ff
+#define THRESHOLD_MIN_ADC_CODE 0x0
-
+#include <linux/interrupt.h>
#include <linux/thermal.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -27,12 +29,16 @@ enum tsens_ver {
VER_2_X,
};
+enum tsens_irq_type {
+ LOWER,
+ UPPER,
+};
+
/**
* struct tsens_sensor - data for each sensor connected to the tsens device
* @priv: tsens device instance that this sensor is connected to
* @tzd: pointer to the thermal zone that this sensor is in
* @offset: offset of temperature adjustment curve
- * @id: Sensor ID
* @hw_id: HW ID can be used in case of platform-specific IDs
* @slope: slope of temperature adjustment curve
* @status: 8960-specific variable to track 8960 and 8660 status register offset
@@ -41,7 +47,6 @@ struct tsens_sensor {
struct tsens_priv *priv;
struct thermal_zone_device *tzd;
int offset;
- unsigned int id;
unsigned int hw_id;
int slope;
u32 status;
@@ -62,13 +67,13 @@ struct tsens_ops {
/* mandatory callbacks */
int (*init)(struct tsens_priv *priv);
int (*calibrate)(struct tsens_priv *priv);
- int (*get_temp)(struct tsens_priv *priv, int i, int *temp);
+ int (*get_temp)(struct tsens_sensor *s, int *temp);
/* optional callbacks */
int (*enable)(struct tsens_priv *priv, int i);
void (*disable)(struct tsens_priv *priv);
int (*suspend)(struct tsens_priv *priv);
int (*resume)(struct tsens_priv *priv);
- int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend);
+ int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend);
};
#define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
@@ -102,22 +107,66 @@ struct tsens_ops {
[_name##_##14] = REG_FIELD(_offset + 56, _startbit, _stopbit), \
[_name##_##15] = REG_FIELD(_offset + 60, _startbit, _stopbit)
-/* reg_field IDs to use as an index into an array */
+#define REG_FIELD_SPLIT_BITS_0_15(_name, _offset) \
+ [_name##_##0] = REG_FIELD(_offset, 0, 0), \
+ [_name##_##1] = REG_FIELD(_offset, 1, 1), \
+ [_name##_##2] = REG_FIELD(_offset, 2, 2), \
+ [_name##_##3] = REG_FIELD(_offset, 3, 3), \
+ [_name##_##4] = REG_FIELD(_offset, 4, 4), \
+ [_name##_##5] = REG_FIELD(_offset, 5, 5), \
+ [_name##_##6] = REG_FIELD(_offset, 6, 6), \
+ [_name##_##7] = REG_FIELD(_offset, 7, 7), \
+ [_name##_##8] = REG_FIELD(_offset, 8, 8), \
+ [_name##_##9] = REG_FIELD(_offset, 9, 9), \
+ [_name##_##10] = REG_FIELD(_offset, 10, 10), \
+ [_name##_##11] = REG_FIELD(_offset, 11, 11), \
+ [_name##_##12] = REG_FIELD(_offset, 12, 12), \
+ [_name##_##13] = REG_FIELD(_offset, 13, 13), \
+ [_name##_##14] = REG_FIELD(_offset, 14, 14), \
+ [_name##_##15] = REG_FIELD(_offset, 15, 15)
+
+#define REG_FIELD_SPLIT_BITS_16_31(_name, _offset) \
+ [_name##_##0] = REG_FIELD(_offset, 16, 16), \
+ [_name##_##1] = REG_FIELD(_offset, 17, 17), \
+ [_name##_##2] = REG_FIELD(_offset, 18, 18), \
+ [_name##_##3] = REG_FIELD(_offset, 19, 19), \
+ [_name##_##4] = REG_FIELD(_offset, 20, 20), \
+ [_name##_##5] = REG_FIELD(_offset, 21, 21), \
+ [_name##_##6] = REG_FIELD(_offset, 22, 22), \
+ [_name##_##7] = REG_FIELD(_offset, 23, 23), \
+ [_name##_##8] = REG_FIELD(_offset, 24, 24), \
+ [_name##_##9] = REG_FIELD(_offset, 25, 25), \
+ [_name##_##10] = REG_FIELD(_offset, 26, 26), \
+ [_name##_##11] = REG_FIELD(_offset, 27, 27), \
+ [_name##_##12] = REG_FIELD(_offset, 28, 28), \
+ [_name##_##13] = REG_FIELD(_offset, 29, 29), \
+ [_name##_##14] = REG_FIELD(_offset, 30, 30), \
+ [_name##_##15] = REG_FIELD(_offset, 31, 31)
+
+/*
+ * reg_field IDs to use as an index into an array
+ * If you change the order of the entries, check the devm_regmap_field_alloc()
+ * calls in init_common()
+ */
enum regfield_ids {
/* ----- SROT ------ */
/* HW_VER */
- VER_MAJOR = 0,
+ VER_MAJOR,
VER_MINOR,
VER_STEP,
/* CTRL_OFFSET */
- TSENS_EN = 3,
+ TSENS_EN,
TSENS_SW_RST,
SENSOR_EN,
CODE_OR_TEMP,
/* ----- TM ------ */
+ /* TRDY */
+ TRDY,
+ /* INTERRUPT ENABLE */
+ INT_EN, /* v2+ has separate enables for crit, upper and lower irq */
/* STATUS */
- LAST_TEMP_0 = 7, /* Last temperature reading */
+ LAST_TEMP_0, /* Last temperature reading */
LAST_TEMP_1,
LAST_TEMP_2,
LAST_TEMP_3,
@@ -133,7 +182,7 @@ enum regfield_ids {
LAST_TEMP_13,
LAST_TEMP_14,
LAST_TEMP_15,
- VALID_0 = 23, /* VALID reading or not */
+ VALID_0, /* VALID reading or not */
VALID_1,
VALID_2,
VALID_3,
@@ -149,38 +198,6 @@ enum regfield_ids {
VALID_13,
VALID_14,
VALID_15,
- MIN_STATUS_0, /* MIN threshold violated */
- MIN_STATUS_1,
- MIN_STATUS_2,
- MIN_STATUS_3,
- MIN_STATUS_4,
- MIN_STATUS_5,
- MIN_STATUS_6,
- MIN_STATUS_7,
- MIN_STATUS_8,
- MIN_STATUS_9,
- MIN_STATUS_10,
- MIN_STATUS_11,
- MIN_STATUS_12,
- MIN_STATUS_13,
- MIN_STATUS_14,
- MIN_STATUS_15,
- MAX_STATUS_0, /* MAX threshold violated */
- MAX_STATUS_1,
- MAX_STATUS_2,
- MAX_STATUS_3,
- MAX_STATUS_4,
- MAX_STATUS_5,
- MAX_STATUS_6,
- MAX_STATUS_7,
- MAX_STATUS_8,
- MAX_STATUS_9,
- MAX_STATUS_10,
- MAX_STATUS_11,
- MAX_STATUS_12,
- MAX_STATUS_13,
- MAX_STATUS_14,
- MAX_STATUS_15,
LOWER_STATUS_0, /* LOWER threshold violated */
LOWER_STATUS_1,
LOWER_STATUS_2,
@@ -197,6 +214,70 @@ enum regfield_ids {
LOWER_STATUS_13,
LOWER_STATUS_14,
LOWER_STATUS_15,
+ LOW_INT_STATUS_0, /* LOWER interrupt status */
+ LOW_INT_STATUS_1,
+ LOW_INT_STATUS_2,
+ LOW_INT_STATUS_3,
+ LOW_INT_STATUS_4,
+ LOW_INT_STATUS_5,
+ LOW_INT_STATUS_6,
+ LOW_INT_STATUS_7,
+ LOW_INT_STATUS_8,
+ LOW_INT_STATUS_9,
+ LOW_INT_STATUS_10,
+ LOW_INT_STATUS_11,
+ LOW_INT_STATUS_12,
+ LOW_INT_STATUS_13,
+ LOW_INT_STATUS_14,
+ LOW_INT_STATUS_15,
+ LOW_INT_CLEAR_0, /* LOWER interrupt clear */
+ LOW_INT_CLEAR_1,
+ LOW_INT_CLEAR_2,
+ LOW_INT_CLEAR_3,
+ LOW_INT_CLEAR_4,
+ LOW_INT_CLEAR_5,
+ LOW_INT_CLEAR_6,
+ LOW_INT_CLEAR_7,
+ LOW_INT_CLEAR_8,
+ LOW_INT_CLEAR_9,
+ LOW_INT_CLEAR_10,
+ LOW_INT_CLEAR_11,
+ LOW_INT_CLEAR_12,
+ LOW_INT_CLEAR_13,
+ LOW_INT_CLEAR_14,
+ LOW_INT_CLEAR_15,
+ LOW_INT_MASK_0, /* LOWER interrupt mask */
+ LOW_INT_MASK_1,
+ LOW_INT_MASK_2,
+ LOW_INT_MASK_3,
+ LOW_INT_MASK_4,
+ LOW_INT_MASK_5,
+ LOW_INT_MASK_6,
+ LOW_INT_MASK_7,
+ LOW_INT_MASK_8,
+ LOW_INT_MASK_9,
+ LOW_INT_MASK_10,
+ LOW_INT_MASK_11,
+ LOW_INT_MASK_12,
+ LOW_INT_MASK_13,
+ LOW_INT_MASK_14,
+ LOW_INT_MASK_15,
+ LOW_THRESH_0, /* LOWER threshold values */
+ LOW_THRESH_1,
+ LOW_THRESH_2,
+ LOW_THRESH_3,
+ LOW_THRESH_4,
+ LOW_THRESH_5,
+ LOW_THRESH_6,
+ LOW_THRESH_7,
+ LOW_THRESH_8,
+ LOW_THRESH_9,
+ LOW_THRESH_10,
+ LOW_THRESH_11,
+ LOW_THRESH_12,
+ LOW_THRESH_13,
+ LOW_THRESH_14,
+ LOW_THRESH_15,
UPPER_STATUS_0, /* UPPER threshold violated */
UPPER_STATUS_1,
UPPER_STATUS_2,
@@ -213,6 +294,70 @@ enum regfield_ids {
UPPER_STATUS_13,
UPPER_STATUS_14,
UPPER_STATUS_15,
+ UP_INT_STATUS_0, /* UPPER interrupt status */
+ UP_INT_STATUS_1,
+ UP_INT_STATUS_2,
+ UP_INT_STATUS_3,
+ UP_INT_STATUS_4,
+ UP_INT_STATUS_5,
+ UP_INT_STATUS_6,
+ UP_INT_STATUS_7,
+ UP_INT_STATUS_8,
+ UP_INT_STATUS_9,
+ UP_INT_STATUS_10,
+ UP_INT_STATUS_11,
+ UP_INT_STATUS_12,
+ UP_INT_STATUS_13,
+ UP_INT_STATUS_14,
+ UP_INT_STATUS_15,
+ UP_INT_CLEAR_0, /* UPPER interrupt clear */
+ UP_INT_CLEAR_1,
+ UP_INT_CLEAR_2,
+ UP_INT_CLEAR_3,
+ UP_INT_CLEAR_4,
+ UP_INT_CLEAR_5,
+ UP_INT_CLEAR_6,
+ UP_INT_CLEAR_7,
+ UP_INT_CLEAR_8,
+ UP_INT_CLEAR_9,
+ UP_INT_CLEAR_10,
+ UP_INT_CLEAR_11,
+ UP_INT_CLEAR_12,
+ UP_INT_CLEAR_13,
+ UP_INT_CLEAR_14,
+ UP_INT_CLEAR_15,
+ UP_INT_MASK_0, /* UPPER interrupt mask */
+ UP_INT_MASK_1,
+ UP_INT_MASK_2,
+ UP_INT_MASK_3,
+ UP_INT_MASK_4,
+ UP_INT_MASK_5,
+ UP_INT_MASK_6,
+ UP_INT_MASK_7,
+ UP_INT_MASK_8,
+ UP_INT_MASK_9,
+ UP_INT_MASK_10,
+ UP_INT_MASK_11,
+ UP_INT_MASK_12,
+ UP_INT_MASK_13,
+ UP_INT_MASK_14,
+ UP_INT_MASK_15,
+ UP_THRESH_0, /* UPPER threshold values */
+ UP_THRESH_1,
+ UP_THRESH_2,
+ UP_THRESH_3,
+ UP_THRESH_4,
+ UP_THRESH_5,
+ UP_THRESH_6,
+ UP_THRESH_7,
+ UP_THRESH_8,
+ UP_THRESH_9,
+ UP_THRESH_10,
+ UP_THRESH_11,
+ UP_THRESH_12,
+ UP_THRESH_13,
+ UP_THRESH_14,
+ UP_THRESH_15,
CRITICAL_STATUS_0, /* CRITICAL threshold violated */
CRITICAL_STATUS_1,
CRITICAL_STATUS_2,
@@ -229,13 +374,38 @@ enum regfield_ids {
CRITICAL_STATUS_13,
CRITICAL_STATUS_14,
CRITICAL_STATUS_15,
- /* TRDY */
- TRDY,
- /* INTERRUPT ENABLE */
- INT_EN, /* Pre-V1, V1.x */
- LOW_INT_EN, /* V2.x */
- UP_INT_EN, /* V2.x */
- CRIT_INT_EN, /* V2.x */
+ MIN_STATUS_0, /* MIN threshold violated */
+ MIN_STATUS_1,
+ MIN_STATUS_2,
+ MIN_STATUS_3,
+ MIN_STATUS_4,
+ MIN_STATUS_5,
+ MIN_STATUS_6,
+ MIN_STATUS_7,
+ MIN_STATUS_8,
+ MIN_STATUS_9,
+ MIN_STATUS_10,
+ MIN_STATUS_11,
+ MIN_STATUS_12,
+ MIN_STATUS_13,
+ MIN_STATUS_14,
+ MIN_STATUS_15,
+ MAX_STATUS_0, /* MAX threshold violated */
+ MAX_STATUS_1,
+ MAX_STATUS_2,
+ MAX_STATUS_3,
+ MAX_STATUS_4,
+ MAX_STATUS_5,
+ MAX_STATUS_6,
+ MAX_STATUS_7,
+ MAX_STATUS_8,
+ MAX_STATUS_9,
+ MAX_STATUS_10,
+ MAX_STATUS_11,
+ MAX_STATUS_12,
+ MAX_STATUS_13,
+ MAX_STATUS_14,
+ MAX_STATUS_15,
/* Keep last */
MAX_REGFIELDS
@@ -295,6 +465,8 @@ struct tsens_context {
* @feat: features of the IP
* @fields: bitfield locations
* @ops: pointer to list of callbacks supported by this device
+ * @debug_root: pointer to debugfs dentry for all tsens
+ * @debug: pointer to debugfs dentry for tsens controller
* @sensor: list of sensors attached to this device
*/
struct tsens_priv {
@@ -303,19 +475,31 @@ struct tsens_priv {
struct regmap *tm_map;
struct regmap *srot_map;
u32 tm_offset;
+
+ /* lock for upper/lower threshold interrupts */
+ spinlock_t ul_lock;
+
struct regmap_field *rf[MAX_REGFIELDS];
struct tsens_context ctx;
const struct tsens_features *feat;
const struct reg_field *fields;
const struct tsens_ops *ops;
+
+ struct dentry *debug_root;
+ struct dentry *debug;
+
struct tsens_sensor sensor[0];
};
char *qfprom_read(struct device *dev, const char *cname);
void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
int init_common(struct tsens_priv *priv);
-int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp);
-int get_temp_common(struct tsens_priv *priv, int i, int *temp);
+int get_temp_tsens_valid(struct tsens_sensor *s, int *temp);
+int get_temp_common(struct tsens_sensor *s, int *temp);
+int tsens_enable_irq(struct tsens_priv *priv);
+void tsens_disable_irq(struct tsens_priv *priv);
+int tsens_set_trips(void *_sensor, int low, int high);
+irqreturn_t tsens_irq_thread(int irq, void *data);
/* TSENS target */
extern const struct tsens_plat_data data_8960;
@@ -324,7 +508,7 @@ extern const struct tsens_plat_data data_8960;
extern const struct tsens_plat_data data_8916, data_8974;
/* TSENS v1 targets */
-extern const struct tsens_plat_data data_tsens_v1;
+extern const struct tsens_plat_data data_tsens_v1, data_8976;
/* TSENS v2 targets */
extern const struct tsens_plat_data data_8996, data_tsens_v2;
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 39542c670301..45e9fcb172cc 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -13,7 +13,16 @@
#include "thermal_core.h"
-#define SITES_MAX 16
+#define SITES_MAX 16
+#define TMR_DISABLE 0x0
+#define TMR_ME 0x80000000
+#define TMR_ALPF 0x0c000000
+#define TMR_ALPF_V2 0x03000000
+#define TMTMIR_DEFAULT 0x0000000f
+#define TIER_DISABLE 0x0
+#define TEUMR0_V2 0x51009c00
+#define TMU_VER1 0x1
+#define TMU_VER2 0x2
/*
* QorIQ TMU Registers
@@ -24,17 +33,12 @@ struct qoriq_tmu_site_regs {
u8 res0[0x8];
};
-struct qoriq_tmu_regs {
+struct qoriq_tmu_regs_v1 {
u32 tmr; /* Mode Register */
-#define TMR_DISABLE 0x0
-#define TMR_ME 0x80000000
-#define TMR_ALPF 0x0c000000
u32 tsr; /* Status Register */
u32 tmtmir; /* Temperature measurement interval Register */
-#define TMTMIR_DEFAULT 0x0000000f
u8 res0[0x14];
u32 tier; /* Interrupt Enable Register */
-#define TIER_DISABLE 0x0
u32 tidr; /* Interrupt Detect Register */
u32 tiscr; /* Interrupt Site Capture Register */
u32 ticscr; /* Interrupt Critical Site Capture Register */
@@ -54,10 +58,50 @@ struct qoriq_tmu_regs {
u32 ipbrr0; /* IP Block Revision Register 0 */
u32 ipbrr1; /* IP Block Revision Register 1 */
u8 res6[0x310];
- u32 ttr0cr; /* Temperature Range 0 Control Register */
- u32 ttr1cr; /* Temperature Range 1 Control Register */
- u32 ttr2cr; /* Temperature Range 2 Control Register */
- u32 ttr3cr; /* Temperature Range 3 Control Register */
+ u32 ttrcr[4]; /* Temperature Range Control Register */
+};
+
+struct qoriq_tmu_regs_v2 {
+ u32 tmr; /* Mode Register */
+ u32 tsr; /* Status Register */
+ u32 tmsr; /* monitor site register */
+ u32 tmtmir; /* Temperature measurement interval Register */
+ u8 res0[0x10];
+ u32 tier; /* Interrupt Enable Register */
+ u32 tidr; /* Interrupt Detect Register */
+ u8 res1[0x8];
+ u32 tiiscr; /* interrupt immediate site capture register */
+ u32 tiascr; /* interrupt average site capture register */
+ u32 ticscr; /* Interrupt Critical Site Capture Register */
+ u32 res2;
+ u32 tmhtcr; /* monitor high temperature capture register */
+ u32 tmltcr; /* monitor low temperature capture register */
+ u32 tmrtrcr; /* monitor rising temperature rate capture register */
+ u32 tmftrcr; /* monitor falling temperature rate capture register */
+ u32 tmhtitr; /* High Temperature Immediate Threshold */
+ u32 tmhtatr; /* High Temperature Average Threshold */
+ u32 tmhtactr; /* High Temperature Average Crit Threshold */
+ u32 res3;
+ u32 tmltitr; /* monitor low temperature immediate threshold */
+ u32 tmltatr; /* monitor low temperature average threshold register */
+ u32 tmltactr; /* monitor low temperature average critical threshold */
+ u32 res4;
+ u32 tmrtrctr; /* monitor rising temperature rate critical threshold */
+ u32 tmftrctr; /* monitor falling temperature rate critical threshold*/
+ u8 res5[0x8];
+ u32 ttcfgr; /* Temperature Configuration Register */
+ u32 tscfgr; /* Sensor Configuration Register */
+ u8 res6[0x78];
+ struct qoriq_tmu_site_regs site[SITES_MAX];
+ u8 res7[0x9f8];
+ u32 ipbrr0; /* IP Block Revision Register 0 */
+ u32 ipbrr1; /* IP Block Revision Register 1 */
+ u8 res8[0x300];
+ u32 teumr0;
+ u32 teumr1;
+ u32 teumr2;
+ u32 res9;
+ u32 ttrcr[4]; /* Temperature Range Control Register */
};
struct qoriq_tmu_data;
@@ -72,7 +116,9 @@ struct qoriq_sensor {
};
struct qoriq_tmu_data {
- struct qoriq_tmu_regs __iomem *regs;
+ int ver;
+ struct qoriq_tmu_regs_v1 __iomem *regs;
+ struct qoriq_tmu_regs_v2 __iomem *regs_v2;
struct clk *clk;
bool little_endian;
struct qoriq_sensor *sensor[SITES_MAX];
@@ -132,12 +178,23 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
return PTR_ERR(qdata->sensor[id]->tzd);
}
- sites |= 0x1 << (15 - id);
+ if (qdata->ver == TMU_VER1)
+ sites |= 0x1 << (15 - id);
+ else
+ sites |= 0x1 << id;
}
/* Enable monitoring */
- if (sites != 0)
- tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
+ if (sites != 0) {
+ if (qdata->ver == TMU_VER1) {
+ tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
+ &qdata->regs->tmr);
+ } else {
+ tmu_write(qdata, sites, &qdata->regs_v2->tmsr);
+ tmu_write(qdata, TMR_ME | TMR_ALPF_V2,
+ &qdata->regs_v2->tmr);
+ }
+ }
return 0;
}
@@ -150,16 +207,21 @@ static int qoriq_tmu_calibration(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
- if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
- dev_err(&pdev->dev, "missing calibration range.\n");
- return -ENODEV;
+ len = of_property_count_u32_elems(np, "fsl,tmu-range");
+ if (len < 0 || len > 4) {
+ dev_err(&pdev->dev, "invalid range data.\n");
+ return len;
+ }
+
+ val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
+ if (val != 0) {
+ dev_err(&pdev->dev, "failed to read range data.\n");
+ return val;
}
/* Init temperature range registers */
- tmu_write(data, range[0], &data->regs->ttr0cr);
- tmu_write(data, range[1], &data->regs->ttr1cr);
- tmu_write(data, range[2], &data->regs->ttr2cr);
- tmu_write(data, range[3], &data->regs->ttr3cr);
+ for (i = 0; i < len; i++)
+ tmu_write(data, range[i], &data->regs->ttrcr[i]);
calibration = of_get_property(np, "fsl,tmu-calibration", &len);
if (calibration == NULL || len % 8) {
@@ -183,7 +245,12 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
tmu_write(data, TIER_DISABLE, &data->regs->tier);
/* Set update_interval */
- tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+ if (data->ver == TMU_VER1) {
+ tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+ } else {
+ tmu_write(data, TMTMIR_DEFAULT, &data->regs_v2->tmtmir);
+ tmu_write(data, TEUMR0_V2, &data->regs_v2->teumr0);
+ }
/* Disable monitoring */
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
@@ -192,6 +259,7 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
static int qoriq_tmu_probe(struct platform_device *pdev)
{
int ret;
+ u32 ver;
struct qoriq_tmu_data *data;
struct device_node *np = pdev->dev.of_node;
@@ -220,6 +288,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
return ret;
}
+ /* version register offset at: 0xbf8 on both v1 and v2 */
+ ver = tmu_read(data, &data->regs->ipbrr0);
+ data->ver = (ver >> 8) & 0xff;
+ if (data->ver == TMU_VER2)
+ data->regs_v2 = (void __iomem *)data->regs;
+
qoriq_tmu_init_device(data); /* TMU initialization */
ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 755d2b5bd2c2..1460cf9d9f1c 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -315,6 +315,10 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
.data = &rcar_gen3_ths_tj_1_m3_w,
},
{
+ .compatible = "renesas,r8a774b1-thermal",
+ .data = &rcar_gen3_ths_tj_1,
+ },
+ {
.compatible = "renesas,r8a7795-thermal",
.data = &rcar_gen3_ths_tj_1,
},
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index dcecf2e8dc8e..ae5743c9a894 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -134,7 +134,8 @@ static int gadc_thermal_probe(struct platform_device *pdev)
gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel");
if (IS_ERR(gti->channel)) {
ret = PTR_ERR(gti->channel);
- dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
return ret;
}
@@ -142,8 +143,10 @@ static int gadc_thermal_probe(struct platform_device *pdev)
&gadc_thermal_ops);
if (IS_ERR(gti->tz_dev)) {
ret = PTR_ERR(gti->tz_dev);
- dev_err(&pdev->dev, "Thermal zone sensor register failed: %d\n",
- ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Thermal zone sensor register failed: %d\n",
+ ret);
return ret;
}
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index d4481cc8958f..9a321dc548c8 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -19,8 +19,6 @@
#include <linux/reboot.h>
#include <linux/string.h>
#include <linux/of.h>
-#include <net/netlink.h>
-#include <net/genetlink.h>
#include <linux/suspend.h>
#define CREATE_TRACE_POINTS
@@ -304,7 +302,7 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
&tz->poll_queue,
msecs_to_jiffies(delay));
else
- cancel_delayed_work_sync(&tz->poll_queue);
+ cancel_delayed_work(&tz->poll_queue);
}
static void monitor_thermal_zone(struct thermal_zone_device *tz)
@@ -1414,7 +1412,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
mutex_unlock(&thermal_list_lock);
- thermal_zone_device_set_polling(tz, 0);
+ cancel_delayed_work_sync(&tz->poll_queue);
thermal_set_governor(tz, NULL);
@@ -1464,97 +1462,6 @@ exit:
}
EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
-#ifdef CONFIG_NET
-static const struct genl_multicast_group thermal_event_mcgrps[] = {
- { .name = THERMAL_GENL_MCAST_GROUP_NAME, },
-};
-
-static struct genl_family thermal_event_genl_family __ro_after_init = {
- .module = THIS_MODULE,
- .name = THERMAL_GENL_FAMILY_NAME,
- .version = THERMAL_GENL_VERSION,
- .maxattr = THERMAL_GENL_ATTR_MAX,
- .mcgrps = thermal_event_mcgrps,
- .n_mcgrps = ARRAY_SIZE(thermal_event_mcgrps),
-};
-
-int thermal_generate_netlink_event(struct thermal_zone_device *tz,
- enum events event)
-{
- struct sk_buff *skb;
- struct nlattr *attr;
- struct thermal_genl_event *thermal_event;
- void *msg_header;
- int size;
- int result;
- static unsigned int thermal_event_seqnum;
-
- if (!tz)
- return -EINVAL;
-
- /* allocate memory */
- size = nla_total_size(sizeof(struct thermal_genl_event)) +
- nla_total_size(0);
-
- skb = genlmsg_new(size, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- /* add the genetlink message header */
- msg_header = genlmsg_put(skb, 0, thermal_event_seqnum++,
- &thermal_event_genl_family, 0,
- THERMAL_GENL_CMD_EVENT);
- if (!msg_header) {
- nlmsg_free(skb);
- return -ENOMEM;
- }
-
- /* fill the data */
- attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT,
- sizeof(struct thermal_genl_event));
-
- if (!attr) {
- nlmsg_free(skb);
- return -EINVAL;
- }
-
- thermal_event = nla_data(attr);
- if (!thermal_event) {
- nlmsg_free(skb);
- return -EINVAL;
- }
-
- memset(thermal_event, 0, sizeof(struct thermal_genl_event));
-
- thermal_event->orig = tz->id;
- thermal_event->event = event;
-
- /* send multicast genetlink message */
- genlmsg_end(skb, msg_header);
-
- result = genlmsg_multicast(&thermal_event_genl_family, skb, 0,
- 0, GFP_ATOMIC);
- if (result)
- dev_err(&tz->device, "Failed to send netlink event:%d", result);
-
- return result;
-}
-EXPORT_SYMBOL_GPL(thermal_generate_netlink_event);
-
-static int __init genetlink_init(void)
-{
- return genl_register_family(&thermal_event_genl_family);
-}
-
-static void genetlink_exit(void)
-{
- genl_unregister_family(&thermal_event_genl_family);
-}
-#else /* !CONFIG_NET */
-static inline int genetlink_init(void) { return 0; }
-static inline void genetlink_exit(void) {}
-#endif /* !CONFIG_NET */
-
static int thermal_pm_notify(struct notifier_block *nb,
unsigned long mode, void *_unused)
{
@@ -1607,13 +1514,9 @@ static int __init thermal_init(void)
if (result)
goto unregister_governors;
- result = genetlink_init();
- if (result)
- goto unregister_class;
-
result = of_parse_thermal_zones();
if (result)
- goto exit_netlink;
+ goto unregister_class;
result = register_pm_notifier(&thermal_pm_nb);
if (result)
@@ -1622,8 +1525,6 @@ static int __init thermal_init(void)
return 0;
-exit_netlink:
- genetlink_exit();
unregister_class:
class_unregister(&thermal_class);
unregister_governors:
@@ -1636,4 +1537,4 @@ error:
mutex_destroy(&poweroff_lock);
return result;
}
-fs_initcall(thermal_init);
+core_initcall(thermal_init);
diff --git a/drivers/thermal/thermal_mmio.c b/drivers/thermal/thermal_mmio.c
index 40524fa13533..d0bdf1ea3331 100644
--- a/drivers/thermal/thermal_mmio.c
+++ b/drivers/thermal/thermal_mmio.c
@@ -110,7 +110,6 @@ static struct platform_driver thermal_mmio_driver = {
.probe = thermal_mmio_probe,
.driver = {
.name = "thermal-mmio",
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(thermal_mmio_id_table),
},
};
diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h
index bae54bb7c048..b74732535e4b 100644
--- a/include/linux/cpu_cooling.h
+++ b/include/linux/cpu_cooling.h
@@ -33,6 +33,13 @@ cpufreq_cooling_register(struct cpufreq_policy *policy);
*/
void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev);
+/**
+ * of_cpufreq_cooling_register - create cpufreq cooling device based on DT.
+ * @policy: cpufreq policy.
+ */
+struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct cpufreq_policy *policy);
+
#else /* !CONFIG_CPU_THERMAL */
static inline struct thermal_cooling_device *
cpufreq_cooling_register(struct cpufreq_policy *policy)
@@ -45,21 +52,12 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
{
return;
}
-#endif /* CONFIG_CPU_THERMAL */
-#if defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL)
-/**
- * of_cpufreq_cooling_register - create cpufreq cooling device based on DT.
- * @policy: cpufreq policy.
- */
-struct thermal_cooling_device *
-of_cpufreq_cooling_register(struct cpufreq_policy *policy);
-#else
static inline struct thermal_cooling_device *
of_cpufreq_cooling_register(struct cpufreq_policy *policy)
{
return NULL;
}
-#endif /* defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL) */
+#endif /* CONFIG_CPU_THERMAL */
#endif /* __CPU_COOLING_H__ */
diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h
index 73f8c3cb9588..d249b88a4d5a 100644
--- a/include/linux/energy_model.h
+++ b/include/linux/energy_model.h
@@ -9,7 +9,6 @@
#include <linux/sched/topology.h>
#include <linux/types.h>
-#ifdef CONFIG_ENERGY_MODEL
/**
* em_cap_state - Capacity state of a performance domain
* @frequency: The CPU frequency in KHz, for consistency with CPUFreq
@@ -40,6 +39,7 @@ struct em_perf_domain {
unsigned long cpus[0];
};
+#ifdef CONFIG_ENERGY_MODEL
#define EM_CPU_MAX_POWER 0xFFFF
struct em_data_callback {
@@ -160,7 +160,6 @@ static inline int em_pd_nr_cap_states(struct em_perf_domain *pd)
}
#else
-struct em_perf_domain {};
struct em_data_callback {};
#define EM_DATA_CB(_active_power_cb) { }
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index e45659c75920..d9111aebb97d 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -544,15 +544,4 @@ static inline void thermal_notify_framework(struct thermal_zone_device *tz,
{ }
#endif /* CONFIG_THERMAL */
-#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL)
-extern int thermal_generate_netlink_event(struct thermal_zone_device *tz,
- enum events event);
-#else
-static inline int thermal_generate_netlink_event(struct thermal_zone_device *tz,
- enum events event)
-{
- return 0;
-}
-#endif
-
#endif /* __THERMAL_H__ */
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 86800b4d5453..322ca8860f54 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -915,7 +915,7 @@ static int __init sugov_register(void)
{
return cpufreq_register_governor(&schedutil_gov);
}
-fs_initcall(sugov_register);
+core_initcall(sugov_register);
#ifdef CONFIG_ENERGY_MODEL
extern bool sched_energy_update;