diff options
-rw-r--r-- | drivers/net/ethernet/dec/tulip/dmfe.c | 152 |
1 files changed, 76 insertions, 76 deletions
diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c index 322213d901d5..c8205606c775 100644 --- a/drivers/net/ethernet/dec/tulip/dmfe.c +++ b/drivers/net/ethernet/dec/tulip/dmfe.c @@ -328,10 +328,10 @@ static void allocate_rx_buffer(struct net_device *); static void update_cr6(u32, void __iomem *); static void send_filter_frame(struct DEVICE *); static void dm9132_id_table(struct DEVICE *); -static u16 phy_read(void __iomem *, u8, u8, u32); -static void phy_write(void __iomem *, u8, u8, u16, u32); -static void phy_write_1bit(void __iomem *, u32); -static u16 phy_read_1bit(void __iomem *); +static u16 dmfe_phy_read(void __iomem *, u8, u8, u32); +static void dmfe_phy_write(void __iomem *, u8, u8, u16, u32); +static void dmfe_phy_write_1bit(void __iomem *, u32); +static u16 dmfe_phy_read_1bit(void __iomem *); static u8 dmfe_sense_speed(struct dmfe_board_info *); static void dmfe_process_mode(struct dmfe_board_info *); static void dmfe_timer(unsigned long); @@ -770,7 +770,7 @@ static int dmfe_stop(struct DEVICE *dev) /* Reset & stop DM910X board */ dw32(DCR0, DM910X_RESET); udelay(100); - phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); /* free interrupt */ free_irq(db->pdev->irq, dev); @@ -1154,7 +1154,7 @@ static void dmfe_timer(unsigned long data) if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) { db->cr6_data &= ~0x40000; update_cr6(db->cr6_data, ioaddr); - phy_write(ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); db->cr6_data |= 0x40000; update_cr6(db->cr6_data, ioaddr); db->timer.expires = DMFE_TIMER_WUT + HZ * 2; @@ -1230,9 +1230,9 @@ static void dmfe_timer(unsigned long data) */ /* need a dummy read because of PHY's register latch*/ - phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); - link_ok_phy = (phy_read (db->ioaddr, - db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; + dmfe_phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); + link_ok_phy = (dmfe_phy_read (db->ioaddr, + db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; if (link_ok_phy != link_ok) { DMFE_DBUG (0, "PHY and chip report different link status", 0); @@ -1247,8 +1247,8 @@ static void dmfe_timer(unsigned long data) /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ /* AUTO or force 1M Homerun/Longrun don't need */ if ( !(db->media_mode & 0x38) ) - phy_write(db->ioaddr, db->phy_addr, - 0, 0x1000, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, + 0, 0x1000, db->chip_id); /* AUTO mode, if INT phyxcer link failed, select EXT device */ if (db->media_mode & DMFE_AUTO) { @@ -1649,16 +1649,16 @@ static u8 dmfe_sense_speed(struct dmfe_board_info *db) /* CR6 bit18=0, select 10/100M */ update_cr6(db->cr6_data & ~0x40000, ioaddr); - phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); - phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); if ( (phy_mode & 0x24) == 0x24 ) { if (db->chip_id == PCI_DM9132_ID) /* DM9132 */ - phy_mode = phy_read(db->ioaddr, - db->phy_addr, 7, db->chip_id) & 0xf000; + phy_mode = dmfe_phy_read(db->ioaddr, + db->phy_addr, 7, db->chip_id) & 0xf000; else /* DM9102/DM9102A */ - phy_mode = phy_read(db->ioaddr, - db->phy_addr, 17, db->chip_id) & 0xf000; + phy_mode = dmfe_phy_read(db->ioaddr, + db->phy_addr, 17, db->chip_id) & 0xf000; switch (phy_mode) { case 0x1000: db->op_mode = DMFE_10MHF; break; case 0x2000: db->op_mode = DMFE_10MFD; break; @@ -1695,15 +1695,15 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db) /* DM9009 Chip: Phyxcer reg18 bit12=0 */ if (db->chip_id == PCI_DM9009_ID) { - phy_reg = phy_read(db->ioaddr, - db->phy_addr, 18, db->chip_id) & ~0x1000; + phy_reg = dmfe_phy_read(db->ioaddr, + db->phy_addr, 18, db->chip_id) & ~0x1000; - phy_write(db->ioaddr, - db->phy_addr, 18, phy_reg, db->chip_id); + dmfe_phy_write(db->ioaddr, + db->phy_addr, 18, phy_reg, db->chip_id); } /* Phyxcer capability setting */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; if (db->media_mode & DMFE_AUTO) { /* AUTO Mode */ @@ -1724,13 +1724,13 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db) phy_reg|=db->PHY_reg4; db->media_mode|=DMFE_AUTO; } - phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); /* Restart Auto-Negotiation */ if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) - phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); if ( !db->chip_type ) - phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); } @@ -1762,7 +1762,7 @@ static void dmfe_process_mode(struct dmfe_board_info *db) /* 10/100M phyxcer force mode need */ if ( !(db->media_mode & 0x18)) { /* Forece Mode */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); if ( !(phy_reg & 0x1) ) { /* parter without N-Way capability */ phy_reg = 0x0; @@ -1772,12 +1772,12 @@ static void dmfe_process_mode(struct dmfe_board_info *db) case DMFE_100MHF: phy_reg = 0x2000; break; case DMFE_100MFD: phy_reg = 0x2100; break; } - phy_write(db->ioaddr, - db->phy_addr, 0, phy_reg, db->chip_id); + dmfe_phy_write(db->ioaddr, + db->phy_addr, 0, phy_reg, db->chip_id); if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) mdelay(20); - phy_write(db->ioaddr, - db->phy_addr, 0, phy_reg, db->chip_id); + dmfe_phy_write(db->ioaddr, + db->phy_addr, 0, phy_reg, db->chip_id); } } } @@ -1787,8 +1787,8 @@ static void dmfe_process_mode(struct dmfe_board_info *db) * Write a word to Phy register */ -static void phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset, - u16 phy_data, u32 chip_id) +static void dmfe_phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset, + u16 phy_data, u32 chip_id) { u16 i; @@ -1799,34 +1799,34 @@ static void phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset, /* Send 33 synchronization clock to Phy controller */ for (i = 0; i < 35; i++) - phy_write_1bit(ioaddr, PHY_DATA_1); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); /* Send start command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0); - phy_write_1bit(ioaddr, PHY_DATA_1); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); /* Send write command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0); - phy_write_1bit(ioaddr, PHY_DATA_1); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); /* Send Phy address */ for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, + phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); /* Send register address */ for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - offset & i ? PHY_DATA_1 : PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, + offset & i ? PHY_DATA_1 : PHY_DATA_0); /* written trasnition */ - phy_write_1bit(ioaddr, PHY_DATA_1); - phy_write_1bit(ioaddr, PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); /* Write a word data to PHY controller */ for ( i = 0x8000; i > 0; i >>= 1) - phy_write_1bit(ioaddr, - phy_data & i ? PHY_DATA_1 : PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, + phy_data & i ? PHY_DATA_1 : PHY_DATA_0); } } @@ -1835,7 +1835,7 @@ static void phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset, * Read a word data from phy register */ -static u16 phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id) +static u16 dmfe_phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id) { int i; u16 phy_data; @@ -1848,33 +1848,33 @@ static u16 phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id) /* Send 33 synchronization clock to Phy controller */ for (i = 0; i < 35; i++) - phy_write_1bit(ioaddr, PHY_DATA_1); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); /* Send start command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0); - phy_write_1bit(ioaddr, PHY_DATA_1); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); /* Send read command(10) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_1); - phy_write_1bit(ioaddr, PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); + dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); /* Send Phy address */ for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, + phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); /* Send register address */ for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - offset & i ? PHY_DATA_1 : PHY_DATA_0); + dmfe_phy_write_1bit(ioaddr, + offset & i ? PHY_DATA_1 : PHY_DATA_0); /* Skip transition state */ - phy_read_1bit(ioaddr); + dmfe_phy_read_1bit(ioaddr); /* read 16bit data */ for (phy_data = 0, i = 0; i < 16; i++) { phy_data <<= 1; - phy_data |= phy_read_1bit(ioaddr); + phy_data |= dmfe_phy_read_1bit(ioaddr); } } @@ -1886,7 +1886,7 @@ static u16 phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id) * Write one bit data to Phy Controller */ -static void phy_write_1bit(void __iomem *ioaddr, u32 phy_data) +static void dmfe_phy_write_1bit(void __iomem *ioaddr, u32 phy_data) { dw32(DCR9, phy_data); /* MII Clock Low */ udelay(1); @@ -1901,7 +1901,7 @@ static void phy_write_1bit(void __iomem *ioaddr, u32 phy_data) * Read one bit phy data from PHY controller */ -static u16 phy_read_1bit(void __iomem *ioaddr) +static u16 dmfe_phy_read_1bit(void __iomem *ioaddr) { u16 phy_data; @@ -1995,11 +1995,11 @@ static void dmfe_parse_srom(struct dmfe_board_info * db) /* Check DM9801 or DM9802 present or not */ db->HPNA_present = 0; update_cr6(db->cr6_data | 0x40000, db->ioaddr); - tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); + tmp_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) { /* DM9801 or DM9802 present */ db->HPNA_timer = 8; - if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { + if ( dmfe_phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { /* DM9801 HomeRun */ db->HPNA_present = 1; dmfe_program_DM9801(db, tmp_reg); @@ -2025,29 +2025,29 @@ static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev) switch(HPNA_rev) { case 0xb900: /* DM9801 E3 */ db->HPNA_command |= 0x1000; - reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); + reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000; - reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); break; case 0xb901: /* DM9801 E4 */ - reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor; - reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3; break; case 0xb902: /* DM9801 E5 */ case 0xb903: /* DM9801 E6 */ default: db->HPNA_command |= 0x1000; - reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5; - reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor; break; } - phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); - phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); - phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); } @@ -2060,10 +2060,10 @@ static void dmfe_program_DM9802(struct dmfe_board_info * db) uint phy_reg; if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR; - phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); - phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); + phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor; - phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); } @@ -2077,7 +2077,7 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) uint phy_reg; /* Got remote device status */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; + phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; switch(phy_reg) { case 0x00: phy_reg = 0x0a00;break; /* LP/LS */ case 0x20: phy_reg = 0x0900;break; /* LP/HS */ @@ -2087,8 +2087,8 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) /* Check remote device status match our setting ot not */ if ( phy_reg != (db->HPNA_command & 0x0f00) ) { - phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, - db->chip_id); + dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, + db->chip_id); db->HPNA_timer=8; } else db->HPNA_timer=600; /* Match, every 10 minutes, check */ |