diff options
| -rw-r--r-- | arch/arm/mach-sa1100/jornada720.c | 12 | ||||
| -rw-r--r-- | drivers/pcmcia/sa1111_jornada720.c | 83 |
2 files changed, 67 insertions, 28 deletions
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 0a2ca9be00e6..6298bad09ef3 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -190,6 +190,17 @@ static struct platform_device s1d13xxxfb_device = { .resource = s1d13xxxfb_resources, }; +static struct gpiod_lookup_table jornada_pcmcia_gpiod_table = { + .dev_id = "1800", + .table = { + GPIO_LOOKUP("sa1111", 0, "s0-power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 1, "s1-power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 2, "s0-3v", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 3, "s1-3v", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct resource sa1111_resources[] = { [0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN), [1] = DEFINE_RES_IRQ(IRQ_GPIO1), @@ -265,6 +276,7 @@ static int __init jornada720_init(void) udelay(20); /* give it some time to restart */ gpiod_add_lookup_table(&jornada_ts_gpiod_table); + gpiod_add_lookup_table(&jornada_pcmcia_gpiod_table); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c index 3d4ca87ca76c..1083e1b4f25d 100644 --- a/drivers/pcmcia/sa1111_jornada720.c +++ b/drivers/pcmcia/sa1111_jornada720.c @@ -6,29 +6,62 @@ * */ #include <linux/module.h> -#include <linux/kernel.h> #include <linux/device.h> #include <linux/errno.h> +#include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/io.h> #include <mach/hardware.h> -#include <asm/hardware/sa1111.h> #include <asm/mach-types.h> #include "sa1111_generic.h" -/* Does SOCKET1_3V actually do anything? */ -#define SOCKET0_POWER GPIO_GPIO0 -#define SOCKET0_3V GPIO_GPIO2 -#define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3) -#define SOCKET1_3V GPIO_GPIO3 +/* + * Socket 0 power: GPIO A0 + * Socket 0 3V: GPIO A2 + * Socket 1 power: GPIO A1 & GPIO A3 + * Socket 1 3V: GPIO A3 + * Does Socket 1 3V actually do anything? + */ +enum { + J720_GPIO_PWR, + J720_GPIO_3V, + J720_GPIO_MAX, +}; +struct jornada720_data { + struct gpio_desc *gpio[J720_GPIO_MAX]; +}; + +static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + struct device *dev = skt->socket.dev.parent; + struct jornada720_data *j; + + j = devm_kzalloc(dev, sizeof(*j), GFP_KERNEL); + if (!j) + return -ENOMEM; + + j->gpio[J720_GPIO_PWR] = devm_gpiod_get(dev, skt->nr ? "s1-power" : + "s0-power", GPIOD_OUT_LOW); + if (IS_ERR(j->gpio[J720_GPIO_PWR])) + return PTR_ERR(j->gpio[J720_GPIO_PWR]); + + j->gpio[J720_GPIO_3V] = devm_gpiod_get(dev, skt->nr ? "s1-3v" : + "s0-3v", GPIOD_OUT_LOW); + if (IS_ERR(j->gpio[J720_GPIO_3V])) + return PTR_ERR(j->gpio[J720_GPIO_3V]); + + skt->driver_data = j; + + return 0; +} static int jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) { - struct sa1111_pcmcia_socket *s = to_skt(skt); - unsigned int pa_dwr_mask, pa_dwr_set; + struct jornada720_data *j = skt->driver_data; + DECLARE_BITMAP(values, J720_GPIO_MAX) = { 0, }; int ret; printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__, @@ -36,35 +69,34 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s switch (skt->nr) { case 0: - pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V; - switch (state->Vcc) { default: case 0: - pa_dwr_set = 0; + __assign_bit(J720_GPIO_PWR, values, 0); + __assign_bit(J720_GPIO_3V, values, 0); break; case 33: - pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; + __assign_bit(J720_GPIO_PWR, values, 1); + __assign_bit(J720_GPIO_3V, values, 1); break; case 50: - pa_dwr_set = SOCKET0_POWER; + __assign_bit(J720_GPIO_PWR, values, 1); + __assign_bit(J720_GPIO_3V, values, 0); break; } break; case 1: - pa_dwr_mask = SOCKET1_POWER; - switch (state->Vcc) { default: case 0: - pa_dwr_set = 0; + __assign_bit(J720_GPIO_PWR, values, 0); + __assign_bit(J720_GPIO_3V, values, 0); break; case 33: - pa_dwr_set = SOCKET1_POWER; - break; case 50: - pa_dwr_set = SOCKET1_POWER; + __assign_bit(J720_GPIO_PWR, values, 1); + __assign_bit(J720_GPIO_3V, values, 1); break; } break; @@ -81,13 +113,15 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s ret = sa1111_pcmcia_configure_socket(skt, state); if (ret == 0) - sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); + ret = gpiod_set_array_value_cansleep(J720_GPIO_MAX, j->gpio, + NULL, values); return ret; } static struct pcmcia_low_level jornada720_pcmcia_ops = { .owner = THIS_MODULE, + .hw_init = jornada720_pcmcia_hw_init, .configure_socket = jornada720_pcmcia_configure_socket, .first = 0, .nr = 2, @@ -95,16 +129,9 @@ static struct pcmcia_low_level jornada720_pcmcia_ops = { int pcmcia_jornada720_init(struct sa1111_dev *sadev) { - unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; - /* Fixme: why messing around with SA11x0's GPIO1? */ GRER |= 0x00000002; - /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ - sa1111_set_io_dir(sadev, pin, 0, 0); - sa1111_set_io(sadev, pin, 0); - sa1111_set_sleep_io(sadev, pin, 0); - sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops, sa11xx_drv_pcmcia_add_one); |