diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/sunxi.txt | 3 | ||||
| -rw-r--r-- | drivers/clk/sunxi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-sunxi.c | 185 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-usb.c | 233 |
4 files changed, 319 insertions, 103 deletions
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 60b44285250d..4fa11af3d378 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -20,6 +20,7 @@ Required properties: "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates "allwinner,sun4i-a10-ahb-clk" - for the AHB clock + "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 @@ -66,6 +67,8 @@ Required properties: "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 + "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 + "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 Required properties for all clocks: - reg : shall be the control register address for the clock. diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 3a5292e3fcf8..058f273d6154 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -9,6 +9,7 @@ obj-y += clk-mod0.o obj-y += clk-sun8i-mbus.o obj-y += clk-sun9i-core.o obj-y += clk-sun9i-mmc.o +obj-y += clk-usb.o obj-$(CONFIG_MFD_SUN6I_PRCM) += \ clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \ diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 379324eb5486..7e1e2bd189b6 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -482,6 +482,45 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, } /** + * sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB + * AHB rate is calculated as follows + * rate = parent_rate >> p + */ + +static void sun5i_a13_get_ahb_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u32 div; + + /* divide only */ + if (parent_rate < *freq) + *freq = parent_rate; + + /* + * user manual says valid speed is 8k ~ 276M, but tests show it + * can work at speeds up to 300M, just after reparenting to pll6 + */ + if (*freq < 8000) + *freq = 8000; + if (*freq > 300000000) + *freq = 300000000; + + div = order_base_2(DIV_ROUND_UP(parent_rate, *freq)); + + /* p = 0 ~ 3 */ + if (div > 3) + div = 3; + + *freq = parent_rate >> div; + + /* we were called to round the frequency, we can now return */ + if (p == NULL) + return; + + *p = div; +} + +/** * sun4i_get_apb1_factors() - calculates m, p factors for APB1 * APB1 rate is calculated as follows * rate = (parent_rate >> p) / (m + 1); @@ -616,6 +655,11 @@ static struct clk_factors_config sun6i_a31_pll6_config = { .n_start = 1, }; +static struct clk_factors_config sun5i_a13_ahb_config = { + .pshift = 4, + .pwidth = 2, +}; + static struct clk_factors_config sun4i_apb1_config = { .mshift = 0, .mwidth = 5, @@ -676,6 +720,13 @@ static const struct factors_data sun6i_a31_pll6_data __initconst = { .name = "pll6x2", }; +static const struct factors_data sun5i_a13_ahb_data __initconst = { + .mux = 6, + .muxmask = BIT(1) | BIT(0), + .table = &sun5i_a13_ahb_config, + .getter = sun5i_a13_get_ahb_factors, +}; + static const struct factors_data sun4i_apb1_data __initconst = { .mux = 24, .muxmask = BIT(1) | BIT(0), @@ -838,59 +889,6 @@ static void __init sunxi_divider_clk_setup(struct device_node *node, /** - * sunxi_gates_reset... - reset bits in leaf gate clk registers handling - */ - -struct gates_reset_data { - void __iomem *reg; - spinlock_t *lock; - struct reset_controller_dev rcdev; -}; - -static int sunxi_gates_reset_assert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - struct gates_reset_data *data = container_of(rcdev, - struct gates_reset_data, - rcdev); - unsigned long flags; - u32 reg; - - spin_lock_irqsave(data->lock, flags); - - reg = readl(data->reg); - writel(reg & ~BIT(id), data->reg); - - spin_unlock_irqrestore(data->lock, flags); - - return 0; -} - -static int sunxi_gates_reset_deassert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - struct gates_reset_data *data = container_of(rcdev, - struct gates_reset_data, - rcdev); - unsigned long flags; - u32 reg; - - spin_lock_irqsave(data->lock, flags); - - reg = readl(data->reg); - writel(reg | BIT(id), data->reg); - - spin_unlock_irqrestore(data->lock, flags); - - return 0; -} - -static struct reset_control_ops sunxi_gates_reset_ops = { - .assert = sunxi_gates_reset_assert, - .deassert = sunxi_gates_reset_deassert, -}; - -/** * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks */ @@ -898,7 +896,6 @@ static struct reset_control_ops sunxi_gates_reset_ops = { struct gates_data { DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); - u32 reset_mask; }; static const struct gates_data sun4i_axi_gates_data __initconst = { @@ -997,26 +994,10 @@ static const struct gates_data sun8i_a23_apb2_gates_data __initconst = { .mask = {0x1F0007}, }; -static const struct gates_data sun4i_a10_usb_gates_data __initconst = { - .mask = {0x1C0}, - .reset_mask = 0x07, -}; - -static const struct gates_data sun5i_a13_usb_gates_data __initconst = { - .mask = {0x140}, - .reset_mask = 0x03, -}; - -static const struct gates_data sun6i_a31_usb_gates_data __initconst = { - .mask = { BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8) }, - .reset_mask = BIT(2) | BIT(1) | BIT(0), -}; - static void __init sunxi_gates_clk_setup(struct device_node *node, struct gates_data *data) { struct clk_onecell_data *clk_data; - struct gates_reset_data *reset_data; const char *clk_parent; const char *clk_name; void __iomem *reg; @@ -1057,21 +1038,6 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, clk_data->clk_num = i; of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); - - /* Register a reset controler for gates with reset bits */ - if (data->reset_mask == 0) - return; - - reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); - if (!reset_data) - return; - - reset_data->reg = reg; - reset_data->lock = &clk_lock; - reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1; - reset_data->rcdev.ops = &sunxi_gates_reset_ops; - reset_data->rcdev.of_node = node; - reset_controller_register(&reset_data->rcdev); } @@ -1080,13 +1046,20 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, * sunxi_divs_clk_setup() helper data */ -#define SUNXI_DIVS_MAX_QTY 2 +#define SUNXI_DIVS_MAX_QTY 4 #define SUNXI_DIVISOR_WIDTH 2 struct divs_data { const struct factors_data *factors; /* data for the factor clock */ - int ndivs; /* number of children */ + int ndivs; /* number of outputs */ + /* + * List of outputs. Refer to the diagram for sunxi_divs_clk_setup(): + * self or base factor clock refers to the output from the pll + * itself. The remaining refer to fixed or configurable divider + * outputs. + */ struct { + u8 self; /* is it the base factor clock? (only one) */ u8 fixed; /* is it a fixed divisor? if not... */ struct clk_div_table *table; /* is it a table based divisor? */ u8 shift; /* otherwise it's a normal divisor with this shift */ @@ -1109,23 +1082,27 @@ static const struct divs_data pll5_divs_data __initconst = { .div = { { .shift = 0, .pow = 0, }, /* M, DDR */ { .shift = 16, .pow = 1, }, /* P, other */ + /* No output for the base factor clock */ } }; static const struct divs_data pll6_divs_data __initconst = { .factors = &sun4i_pll6_data, - .ndivs = 2, + .ndivs = 4, .div = { { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ { .fixed = 2 }, /* P, other */ + { .self = 1 }, /* base factor clock, 2x */ + { .fixed = 4 }, /* pll6 / 4, used as ahb input */ } }; static const struct divs_data sun6i_a31_pll6_divs_data __initconst = { .factors = &sun6i_a31_pll6_data, - .ndivs = 1, + .ndivs = 2, .div = { { .fixed = 2 }, /* normal output */ + { .self = 1 }, /* base factor clock, 2x */ } }; @@ -1156,6 +1133,10 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, int ndivs = SUNXI_DIVS_MAX_QTY, i = 0; int flags, clkflags; + /* if number of children known, use it */ + if (data->ndivs) + ndivs = data->ndivs; + /* Set up factor clock that we will be dividing */ pclk = sunxi_factors_clk_setup(node, data->factors); parent = __clk_get_name(pclk); @@ -1166,7 +1147,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, if (!clk_data) return; - clks = kzalloc((SUNXI_DIVS_MAX_QTY+1) * sizeof(*clks), GFP_KERNEL); + clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL); if (!clks) goto free_clkdata; @@ -1176,15 +1157,17 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, * our RAM clock! */ clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT; - /* if number of children known, use it */ - if (data->ndivs) - ndivs = data->ndivs; - for (i = 0; i < ndivs; i++) { if (of_property_read_string_index(node, "clock-output-names", i, &clk_name) != 0) break; + /* If this is the base factor clock, only update clks */ + if (data->div[i].self) { + clk_data->clks[i] = pclk; + continue; + } + gate_hw = NULL; rate_hw = NULL; rate_ops = NULL; @@ -1243,9 +1226,6 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, clk_register_clkdev(clks[i], clk_name, NULL); } - /* The last clock available on the getter is the parent */ - clks[i++] = pclk; - /* Adjust to the real max */ clk_data->clk_num = i; @@ -1269,6 +1249,7 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, {.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,}, {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, + {.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} @@ -1324,9 +1305,6 @@ static const struct of_device_id clk_gates_match[] __initconst = { {.compatible = "allwinner,sun9i-a80-apb1-gates-clk", .data = &sun9i_a80_apb1_gates_data,}, {.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,}, {.compatible = "allwinner,sun8i-a23-apb2-gates-clk", .data = &sun8i_a23_apb2_gates_data,}, - {.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,}, - {.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,}, - {.compatible = "allwinner,sun6i-a31-usb-clk", .data = &sun6i_a31_usb_gates_data,}, {} }; @@ -1348,15 +1326,15 @@ static void __init sunxi_init_clocks(const char *clocks[], int nclocks) { unsigned int i; + /* Register divided output clocks */ + of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup); + /* Register factor clocks */ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); /* Register divider clocks */ of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup); - /* Register divided output clocks */ - of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup); - /* Register mux clocks */ of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); @@ -1385,6 +1363,7 @@ static void __init sun4i_a10_init_clocks(struct device_node *node) CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); static const char *sun5i_critical_clocks[] __initdata = { + "cpu", "pll5_ddr", "ahb_sdram", }; diff --git a/drivers/clk/sunxi/clk-usb.c b/drivers/clk/sunxi/clk-usb.c new file mode 100644 index 000000000000..a86ed2f8d7af --- /dev/null +++ b/drivers/clk/sunxi/clk-usb.c @@ -0,0 +1,233 @@ +/* + * Copyright 2013-2015 Emilio López + * + * Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/reset-controller.h> +#include <linux/spinlock.h> + + +/** + * sunxi_usb_reset... - reset bits in usb clk registers handling + */ + +struct usb_reset_data { + void __iomem *reg; + spinlock_t *lock; + struct clk *clk; + struct reset_controller_dev rcdev; +}; + +static int sunxi_usb_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct usb_reset_data *data = container_of(rcdev, + struct usb_reset_data, + rcdev); + unsigned long flags; + u32 reg; + + clk_prepare_enable(data->clk); + spin_lock_irqsave(data->lock, flags); + + reg = readl(data->reg); + writel(reg & ~BIT(id), data->reg); + + spin_unlock_irqrestore(data->lock, flags); + clk_disable_unprepare(data->clk); + + return 0; +} + +static int sunxi_usb_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct usb_reset_data *data = container_of(rcdev, + struct usb_reset_data, + rcdev); + unsigned long flags; + u32 reg; + + clk_prepare_enable(data->clk); + spin_lock_irqsave(data->lock, flags); + + reg = readl(data->reg); + writel(reg | BIT(id), data->reg); + + spin_unlock_irqrestore(data->lock, flags); + clk_disable_unprepare(data->clk); + + return 0; +} + +static struct reset_control_ops sunxi_usb_reset_ops = { + .assert = sunxi_usb_reset_assert, + .deassert = sunxi_usb_reset_deassert, +}; + +/** + * sunxi_usb_clk_setup() - Setup function for usb gate clocks + */ + +#define SUNXI_USB_MAX_SIZE 32 + +struct usb_clk_data { + u32 clk_mask; + u32 reset_mask; + bool reset_needs_clk; +}; + +static void __init sunxi_usb_clk_setup(struct device_node *node, + const struct usb_clk_data *data, + spinlock_t *lock) +{ + struct clk_onecell_data *clk_data; + struct usb_reset_data *reset_data; + const char *clk_parent; + const char *clk_name; + void __iomem *reg; + int qty; + int i = 0; + int j = 0; + + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); + if (IS_ERR(reg)) + return; + + clk_parent = of_clk_get_parent_name(node, 0); + if (!clk_parent) + return; + + /* Worst-case size approximation and memory allocation */ + qty = find_last_bit((unsigned long *)&data->clk_mask, + SUNXI_USB_MAX_SIZE); + + clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); + if (!clk_data) + return; + + clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL); + if (!clk_data->clks) { + kfree(clk_data); + return; + } + + for_each_set_bit(i, (unsigned long *)&data->clk_mask, + SUNXI_USB_MAX_SIZE) { + of_property_read_string_index(node, "clock-output-names", + j, &clk_name); + clk_data->clks[i] = clk_register_gate(NULL, clk_name, + clk_parent, 0, + reg, i, 0, lock); + WARN_ON(IS_ERR(clk_data->clks[i])); + + j++; + } + + /* Adjust to the real max */ + clk_data->clk_num = i; + + of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + + /* Register a reset controller for usb with reset bits */ + if (data->reset_mask == 0) + return; + + reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); + if (!reset_data) + return; + + if (data->reset_needs_clk) { + reset_data->clk = of_clk_get(node, 0); + if (IS_ERR(reset_data->clk)) { + pr_err("Could not get clock for reset controls\n"); + kfree(reset_data); + return; + } + } + + reset_data->reg = reg; + reset_data->lock = lock; + reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1; + reset_data->rcdev.ops = &sunxi_usb_reset_ops; + reset_data->rcdev.of_node = node; + reset_controller_register(&reset_data->rcdev); +} + +static const struct usb_clk_data sun4i_a10_usb_clk_data __initconst = { + .clk_mask = BIT(8) | BIT(7) | BIT(6), + .reset_mask = BIT(2) | BIT(1) | BIT(0), +}; + +static DEFINE_SPINLOCK(sun4i_a10_usb_lock); + +static void __init sun4i_a10_usb_setup(struct device_node *node) +{ + sunxi_usb_clk_setup(node, &sun4i_a10_usb_clk_data, &sun4i_a10_usb_lock); +} +CLK_OF_DECLARE(sun4i_a10_usb, "allwinner,sun4i-a10-usb-clk", sun4i_a10_usb_setup); + +static const struct usb_clk_data sun5i_a13_usb_clk_data __initconst = { + .clk_mask = BIT(8) | BIT(6), + .reset_mask = BIT(1) | BIT(0), +}; + +static void __init sun5i_a13_usb_setup(struct device_node *node) +{ + sunxi_usb_clk_setup(node, &sun5i_a13_usb_clk_data, &sun4i_a10_usb_lock); +} +CLK_OF_DECLARE(sun5i_a13_usb, "allwinner,sun5i-a13-usb-clk", sun5i_a13_usb_setup); + +static const struct usb_clk_data sun6i_a31_usb_clk_data __initconst = { + .clk_mask = BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8), + .reset_mask = BIT(2) | BIT(1) | BIT(0), +}; + +static void __init sun6i_a31_usb_setup(struct device_node *node) +{ + sunxi_usb_clk_setup(node, &sun6i_a31_usb_clk_data, &sun4i_a10_usb_lock); +} +CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk", sun6i_a31_usb_setup); + +static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = { + .clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1), + .reset_mask = BIT(19) | BIT(18) | BIT(17), + .reset_needs_clk = 1, +}; + +static DEFINE_SPINLOCK(a80_usb_mod_lock); + +static void __init sun9i_a80_usb_mod_setup(struct device_node *node) +{ + sunxi_usb_clk_setup(node, &sun9i_a80_usb_mod_data, &a80_usb_mod_lock); +} +CLK_OF_DECLARE(sun9i_a80_usb_mod, "allwinner,sun9i-a80-usb-mod-clk", sun9i_a80_usb_mod_setup); + +static const struct usb_clk_data sun9i_a80_usb_phy_data __initconst = { + .clk_mask = BIT(10) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1), + .reset_mask = BIT(21) | BIT(20) | BIT(19) | BIT(18) | BIT(17), + .reset_needs_clk = 1, +}; + +static DEFINE_SPINLOCK(a80_usb_phy_lock); + +static void __init sun9i_a80_usb_phy_setup(struct device_node *node) +{ + sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock); +} +CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup); |