diff options
56 files changed, 922 insertions, 236 deletions
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml index 02ecc93417ef..0ccd632d5620 100644 --- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A10 MMC Controller allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml new file mode 100644 index 000000000000..bc403ae9e5d9 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/amlogic,meson-gx-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic SD / eMMC controller for S905/GXBB family SoCs + +description: + The MMC 5.1 compliant host controller on Amlogic provides the + interface for SD, eMMC and SDIO devices + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + oneOf: + - const: amlogic,meson-axg-mmc + - items: + - const: amlogic,meson-gx-mmc + - const: amlogic,meson-gxbb-mmc + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: mmc controller instance + - description: card detect + + clocks: + maxItems: 3 + + clock-names: + items: + - const: core + - const: clkin0 + - const: clkin1 + + resets: + maxItems: 1 + + amlogic,dram-access-quirk: + type: boolean + description: + set when controller's internal DMA engine cannot access the DRAM memory, + like on the G12A dedicated SDIO controller. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mmc@70000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x70000 0x2000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + clocks = <&clk_mmc>, <&xtal>, <&clk_div>; + clock-names = "core", "clkin0", "clkin1"; + pinctrl-0 = <&emm_pins>; + resets = <&reset_mmc>; + }; diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt deleted file mode 100644 index ccc5358db131..000000000000 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt +++ /dev/null @@ -1,39 +0,0 @@ -Amlogic SD / eMMC controller for S905/GXBB family SoCs - -The MMC 5.1 compliant host controller on Amlogic provides the -interface for SD, eMMC and SDIO devices. - -This file documents the properties in addition to those available in -the MMC core bindings, documented by mmc.txt. - -Required properties: -- compatible : contains one of: - - "amlogic,meson-gx-mmc" - - "amlogic,meson-gxbb-mmc" - - "amlogic,meson-gxl-mmc" - - "amlogic,meson-gxm-mmc" - - "amlogic,meson-axg-mmc" -- clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names. -- clock-names: Should contain the following: - "core" - Main peripheral bus clock - "clkin0" - Parent clock of internal mux - "clkin1" - Other parent clock of internal mux - The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the - clock rate requested by the MMC core. -- resets : phandle of the internal reset line - -Optional properties: -- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the - DRAM memory, like on the G12A dedicated SDIO controller. - -Example: - - sd_emmc_a: mmc@70000 { - compatible = "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x2000>; - interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - pinctrl-0 = <&emmc_pins>; - resets = <&reset RESET_SD_EMMC_A>; - }; diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml index 1c391bec43dc..1a6cda82f296 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson SDHC controller allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml maintainers: - Martin Blumenstingl <martin.blumenstingl@googlemail.com> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index 4053de758db6..8296c34cfa00 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mmc/arasan,sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Arasan SDHCI Controller @@ -10,7 +10,7 @@ maintainers: - Adrian Hunter <adrian.hunter@intel.com> allOf: - - $ref: "mmc-controller.yaml#" + - $ref: mmc-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index 8b1a0fdcb5e3..adacd0535c14 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -29,6 +29,9 @@ properties: clocks: maxItems: 1 + resets: + maxItems: 1 + # PHY DLL input delays: # They are used to delay the data valid window, and align the window to # sampling clock. The delay starts from 5ns (for delay parameter equal to 0) @@ -36,43 +39,43 @@ properties: cdns,phy-input-delay-sd-highspeed: description: Value of the delay in the input path for SD high-speed timing - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f cdns,phy-input-delay-legacy: description: Value of the delay in the input path for legacy timing - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr12: description: Value of the delay in the input path for SD UHS SDR12 timing - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr25: description: Value of the delay in the input path for SD UHS SDR25 timing - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr50: description: Value of the delay in the input path for SD UHS SDR50 timing - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f cdns,phy-input-delay-sd-uhs-ddr50: description: Value of the delay in the input path for SD UHS DDR50 timing - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f cdns,phy-input-delay-mmc-highspeed: description: Value of the delay in the input path for MMC high-speed timing - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f @@ -83,7 +86,7 @@ properties: # Each delay property represents the fraction of the clock period. # The approximate delay value will be # (<delay property value>/128)*sdmclk_clock_period. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x1f @@ -91,7 +94,7 @@ properties: description: | Value of the delay introduced on the sdclk output for all modes except HS200, HS400 and HS400_ES. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x7f @@ -99,7 +102,7 @@ properties: description: | Value of the delay introduced on the sdclk output for HS200, HS400 and HS400_ES speed modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x7f @@ -107,7 +110,7 @@ properties: description: | Value of the delay introduced on the dat_strobe input used in HS400 / HS400_ES speed modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 0x7f diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index dc6256f04b42..7f721fbfb009 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -10,7 +10,7 @@ maintainers: - Shawn Guo <shawnguo@kernel.org> allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml description: | The Enhanced Secure Digital Host Controller on Freescale i.MX family @@ -29,15 +29,24 @@ properties: - fsl,imx53-esdhc - fsl,imx6q-usdhc - fsl,imx6sl-usdhc - - fsl,imx6sll-usdhc - fsl,imx6sx-usdhc - - fsl,imx6ull-usdhc - fsl,imx7d-usdhc - fsl,imx7ulp-usdhc - fsl,imx8mm-usdhc - fsl,imxrt1050-usdhc - nxp,s32g2-usdhc - items: + - const: fsl,imx50-esdhc + - const: fsl,imx53-esdhc + - items: + - enum: + - fsl,imx6sll-usdhc + - fsl,imx6ull-usdhc + - const: fsl,imx6sx-usdhc + - items: + - const: fsl,imx7d-usdhc + - const: fsl,imx6sl-usdhc + - items: - enum: - fsl,imx8mq-usdhc - const: fsl,imx7d-usdhc @@ -98,12 +107,12 @@ properties: Specify the number of delay cells for override mode. This is used to set the clock delay for DLL(Delay Line) on override mode to select a proper data sampling window in case the clock quality is not good - due to signal path is too long on the board. Please refer to eSDHC/uSDHC + because the signal path is too long on the board. Please refer to eSDHC/uSDHC chapter, DLL (Delay Line) section in RM for details. default: 0 voltage-ranges: - $ref: '/schemas/types.yaml#/definitions/uint32-matrix' + $ref: /schemas/types.yaml#/definitions/uint32-matrix description: | Specify the voltage range in case there are software transparent level shifters on the outputs of the controller. Two cells are required, first @@ -127,7 +136,7 @@ properties: Specify the increasing delay cell steps in tuning procedure. The uSDHC use one delay cell as default increasing step to do tuning process. This property allows user to change the tuning step to more than one delay - cells which is useful for some special boards or cards when the default + cell which is useful for some special boards or cards when the default tuning step can't find the proper delay window within limited tuning retries. default: 0 diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml index ffa162722b8e..221f5bc047bd 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml @@ -10,7 +10,7 @@ maintainers: - Markus Pargmann <mpa@pengutronix.de> allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml index fa6cfe092fc9..1f63faf17743 100644 --- a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Sparx5 Mobile Storage Host Controller allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml maintainers: - Lars Povlsen <lars.povlsen@microchip.com> @@ -35,7 +35,7 @@ properties: microchip,clock-delay: description: Delay clock to card to meet setup time requirements. Each step increase by 1.25ns. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 15 diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml index 911a5996e099..588be73168fa 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml @@ -41,7 +41,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - sdhci0_pwrseq { + pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml index 3397dbff88c2..b35e00e8c65e 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml @@ -35,7 +35,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - wifi_pwrseq: wifi_pwrseq { + pwrseq { compatible = "mmc-pwrseq-sd8787"; powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml index 64e3644eefeb..00feaafc1063 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml @@ -55,7 +55,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - sdhci0_pwrseq { + pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; clocks = <&clk_32768_ck>; diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml index c0662ce9946d..36acc40c7d18 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml @@ -10,7 +10,7 @@ maintainers: - Ulf Hansson <ulf.hansson@linaro.org> allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml - $ref: /schemas/spi/spi-peripheral-props.yaml description: | diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml index bec8f8c71ff2..32e512a68ed6 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml @@ -17,7 +17,7 @@ description: | and the properties used by the mxsmmc driver. allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml index fda0b45ee577..72987f0326a1 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml @@ -99,53 +99,53 @@ properties: The DQS trim values are only used on controllers which support HS400 timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,default-trim: description: Specify the default outbound clock trimmer value. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,dqs-trim: description: Specify DQS trim value for HS400 timing. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-1v8: description: Specify drive strength calibration offsets for 1.8 V signaling modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-1v8-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 1.8 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-3v3: description: Specify drive strength calibration offsets for 3.3 V signaling modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-3v3-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 3.3 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-sdr104: description: Specify drive strength calibration offsets for SDR104 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-hs400: description: Specify drive strength calibration offsets for HS400 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-1v8: description: Specify drive strength calibration offsets for 1.8 V signaling modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-1v8-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 1.8 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-3v3: description: Specify drive strength calibration offsets for 3.3 V @@ -157,25 +157,25 @@ properties: refer to the reference manual of the SoC for correct values. The SDR104 and HS400 timing specific values are used in corresponding modes if specified. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-3v3-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 3.3 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-sdr104: description: Specify drive strength calibration offsets for SDR104 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-hs400: description: Specify drive strength calibration offsets for HS400 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,only-1-8v: description: The presence of this property indicates that the controller operates at a 1.8 V fixed I/O voltage. - $ref: "/schemas/types.yaml#/definitions/flag" + $ref: /schemas/types.yaml#/definitions/flag required: - compatible @@ -186,7 +186,7 @@ required: - reset-names allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml index b0d81ebe0f6e..1b7d88ed3799 100644 --- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Actions Semi Owl SoCs SD/MMC/SDIO controller allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml index c36ba561c387..024313b79ec9 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml @@ -10,7 +10,7 @@ maintainers: - Wolfram Sang <wsa+renesas@sang-engineering.com> allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 7bfb10c62566..7756a8687eaf 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mmc/renesas,sdhi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas SDHI SD/MMC controller @@ -59,6 +59,7 @@ properties: - renesas,sdhi-r9a07g043 # RZ/G2UL - renesas,sdhi-r9a07g044 # RZ/G2{L,LC} - renesas,sdhi-r9a07g054 # RZ/V2L + - renesas,sdhi-r9a09g011 # RZ/V2M - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2 - items: - enum: @@ -111,7 +112,7 @@ properties: max-frequency: true allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml - if: properties: @@ -121,6 +122,7 @@ allOf: - renesas,sdhi-r9a07g043 - renesas,sdhi-r9a07g044 - renesas,sdhi-r9a07g054 + - renesas,sdhi-r9a09g011 then: properties: clocks: diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index c7e14b7dba9e..211cd0b0bc5f 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -14,7 +14,7 @@ description: file and the Rockchip specific extensions. allOf: - - $ref: "synopsys-dw-mshc-common.yaml#" + - $ref: synopsys-dw-mshc-common.yaml# maintainers: - Heiko Stuebner <heiko@sntech.de> @@ -39,6 +39,7 @@ properties: - rockchip,rk3368-dw-mshc - rockchip,rk3399-dw-mshc - rockchip,rk3568-dw-mshc + - rockchip,rk3588-dw-mshc - rockchip,rv1108-dw-mshc - rockchip,rv1126-dw-mshc - const: rockchip,rk3288-dw-mshc diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml index fdaa18481aa0..6ee78a38bd74 100644 --- a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml @@ -112,7 +112,7 @@ required: - samsung,dw-mshc-sdr-timing allOf: - - $ref: "synopsys-dw-mshc-common.yaml#" + - $ref: synopsys-dw-mshc-common.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 6b89238f0565..64df6919abaf 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -34,6 +34,8 @@ properties: - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0 - items: - enum: + - qcom,ipq5332-sdhci + - qcom,ipq9574-sdhci - qcom,qcs404-sdhci - qcom,sc7180-sdhci - qcom,sc7280-sdhci @@ -125,11 +127,13 @@ properties: phandle to apps_smmu node with sid mask. interconnects: + minItems: 1 items: - description: data path, sdhc to ddr - description: config path, cpu to sdhc interconnect-names: + minItems: 1 items: - const: sdhc-ddr - const: cpu-sdhc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml index 3d46c2525787..09455f9fa8de 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Marvell PXA SDHCI v2/v3 +title: Marvell PXA SDHCI v1/v2/v3 maintainers: - Ulf Hansson <ulf.hansson@linaro.org> @@ -34,6 +34,7 @@ allOf: properties: compatible: enum: + - mrvl,pxav1-mmc - mrvl,pxav2-mmc - mrvl,pxav3-mmc - marvell,armada-380-sdhci @@ -61,6 +62,22 @@ properties: - const: io - const: core + pinctrl-names: + description: + Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between + SDIO CMD and GPIO mode. + items: + - const: default + - const: state_cmd_gpio + + pinctrl-0: + description: + Should contain default pinctrl. + + pinctrl-1: + description: + Should switch CMD pin to GPIO mode as a high output. + mrvl,clk-delay-cycles: description: Specify a number of cycles to delay for tuning. $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml index a586fad0a46b..c71424aeaccd 100644 --- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml @@ -55,6 +55,16 @@ properties: minItems: 1 maxItems: 3 + socionext,syscon-uhs-mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that configures UHS mode + - description: ID of SD instance + description: + A phandle to syscon with one argument that configures UHS mode. + The argument is the ID of SD instance. + allOf: - $ref: mmc-controller.yaml diff --git a/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml new file mode 100644 index 000000000000..51e1b04e799f --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/starfive,jh7110-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive Designware Mobile Storage Host Controller + +description: + StarFive uses the Synopsys designware mobile storage host controller + to interface a SoC with storage medium such as eMMC or SD/MMC cards. + +allOf: + - $ref: synopsys-dw-mshc-common.yaml# + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-mmc + + reg: + maxItems: 1 + + clocks: + items: + - description: biu clock + - description: ciu clock + + clock-names: + items: + - const: biu + - const: ciu + + interrupts: + maxItems: 1 + + starfive,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller syscon node + - description: offset of SYS_SYSCONSAIF__SYSCFG register for MMC controller + - description: shift of SYS_SYSCONSAIF__SYSCFG register for MMC controller + - description: mask of SYS_SYSCONSAIF__SYSCFG register for MMC controller + description: + Should be four parameters, the phandle to System Register Controller + syscon node and the offset/shift/mask of SYS_SYSCONSAIF__SYSCFG register + for MMC controller. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - starfive,sysreg + +unevaluatedProperties: false + +examples: + - | + mmc@16010000 { + compatible = "starfive,jh7110-mmc"; + reg = <0x16010000 0x10000>; + clocks = <&syscrg 91>, + <&syscrg 93>; + clock-names = "biu","ciu"; + resets = <&syscrg 64>; + reset-names = "reset"; + interrupts = <74>; + fifo-depth = <32>; + fifo-watermark-aligned; + data-addr = <0>; + starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml index 23aa8e6b2d70..611687166735 100644 --- a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml @@ -12,7 +12,7 @@ maintainers: - Li-hao Kuo <lhjeff911@gmail.com> allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 8dfad89c78a7..6f11b2adf103 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Synopsys Designware Mobile Storage Host Controller Common Properties allOf: - - $ref: "mmc-controller.yaml#" + - $ref: mmc-controller.yaml# maintainers: - Ulf Hansson <ulf.hansson@linaro.org> diff --git a/MAINTAINERS b/MAINTAINERS index 203c2f141919..70429a8e59bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19924,6 +19924,12 @@ F: Documentation/devicetree/bindings/clock/starfive,jh7100-*.yaml F: drivers/clk/starfive/clk-starfive-jh7100* F: include/dt-bindings/clock/starfive-jh7100*.h +STARFIVE JH7110 MMC/SD/SDIO DRIVER +M: William Qiu <william.qiu@starfivetech.com> +S: Supported +F: Documentation/devicetree/bindings/mmc/starfive* +F: drivers/mmc/host/dw_mmc-starfive.c + STARFIVE JH71X0 PINCTRL DRIVERS M: Emil Renner Berthing <kernel@esmil.dk> M: Jianlong Huang <jianlong.huang@starfivetech.com> diff --git a/drivers/memstick/core/Kconfig b/drivers/memstick/core/Kconfig index 08192fd70eb4..50fa0711da9d 100644 --- a/drivers/memstick/core/Kconfig +++ b/drivers/memstick/core/Kconfig @@ -20,6 +20,7 @@ config MEMSTICK_UNSAFE_RESUME config MSPRO_BLOCK tristate "MemoryStick Pro block device driver" depends on BLOCK + imply IOSCHED_BFQ help Say Y here to enable the MemoryStick Pro block device driver support. This provides a block device driver, which you can use @@ -29,6 +30,7 @@ config MSPRO_BLOCK config MS_BLOCK tristate "MemoryStick Standard device driver" depends on BLOCK + imply IOSCHED_BFQ help Say Y here to enable the MemoryStick Standard device driver support. This provides a block device driver, which you can use diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index 6f25c34e4fec..bf4e29ef023c 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -15,7 +15,7 @@ config PWRSEQ_EMMC config PWRSEQ_SD8787 tristate "HW reset support for SD8787 BT + Wifi module" - depends on OF && (MWIFIEX || BT_MRVL_SDIO || LIBERTAS_SDIO || WILC1000_SDIO) + depends on OF && (MWIFIEX != n || BT_MRVL_SDIO != n || LIBERTAS_SDIO != n || WILC1000_SDIO != n) help This selects hardware reset support for the SD8787 BT + Wifi module. By default this option is set to n. @@ -37,6 +37,7 @@ config PWRSEQ_SIMPLE config MMC_BLOCK tristate "MMC block device driver" depends on BLOCK + imply IOSCHED_BFQ default y help Say Y here to enable the MMC block device driver support. diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 20da7ed43e6d..672ab90c4b2d 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -470,6 +470,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, struct mmc_data data = {}; struct mmc_request mrq = {}; struct scatterlist sg; + bool r1b_resp, use_r1b_resp = false; + unsigned int busy_timeout_ms; int err; unsigned int target_part; @@ -545,6 +547,13 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, (cmd.opcode == MMC_SWITCH)) return mmc_sanitize(card, idata->ic.cmd_timeout_ms); + /* If it's an R1B response we need some more preparations. */ + busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS; + r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B; + if (r1b_resp) + use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd, + busy_timeout_ms); + mmc_wait_for_req(card->host, &mrq); memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp)); @@ -596,14 +605,14 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, if (idata->ic.postsleep_min_us) usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us); - if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { - /* - * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we - * allow to override the default timeout value if a custom timeout is specified. - */ - err = mmc_poll_for_busy(card, idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS, - false, MMC_BUSY_IO); - } + /* No need to poll when using HW busy detection. */ + if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) + return 0; + + /* Ensure RPMB/R1B command has completed by polling with CMD13. */ + if (idata->rpmb || r1b_resp) + err = mmc_poll_for_busy(card, busy_timeout_ms, false, + MMC_BUSY_IO); return err; } diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index d17eda753b7e..096093f7be00 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -588,6 +588,32 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) EXPORT_SYMBOL(mmc_alloc_host); +static void devm_mmc_host_release(struct device *dev, void *res) +{ + mmc_free_host(*(struct mmc_host **)res); +} + +struct mmc_host *devm_mmc_alloc_host(struct device *dev, int extra) +{ + struct mmc_host **dr, *host; + + dr = devres_alloc(devm_mmc_host_release, sizeof(*dr), GFP_KERNEL); + if (!dr) + return NULL; + + host = mmc_alloc_host(extra, dev); + if (!host) { + devres_free(dr); + return NULL; + } + + *dr = host; + devres_add(dev, dr); + + return host; +} +EXPORT_SYMBOL(devm_mmc_alloc_host); + static int mmc_validate_host_caps(struct mmc_host *host) { struct device *dev = host->parent; diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 81c55bfd6e0c..3b3adbddf664 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -575,6 +575,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd, cmd->busy_timeout = timeout_ms; return true; } +EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd); /** * __mmc_switch - modify EXT_CSD register diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 988467fbb621..3bac1e71411b 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -119,14 +119,14 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev) pwrseq->ext_clk = devm_clk_get(dev, "ext_clock"); if (IS_ERR(pwrseq->ext_clk) && PTR_ERR(pwrseq->ext_clk) != -ENOENT) - return PTR_ERR(pwrseq->ext_clk); + return dev_err_probe(dev, PTR_ERR(pwrseq->ext_clk), "external clock not ready\n"); pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(pwrseq->reset_gpios) && PTR_ERR(pwrseq->reset_gpios) != -ENOENT && PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) { - return PTR_ERR(pwrseq->reset_gpios); + return dev_err_probe(dev, PTR_ERR(pwrseq->reset_gpios), "reset GPIOs not ready\n"); } device_property_read_u32(dev, "post-power-on-delay-ms", diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 79dbf90216b5..b774bf51981d 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -766,7 +766,7 @@ EXPORT_SYMBOL_GPL(sdio_retune_crc_disable); * sdio_retune_crc_enable - re-enable retuning on CRC errors * @func: SDIO function attached to host * - * This is the compement to sdio_retune_crc_disable(). + * This is the complement to sdio_retune_crc_disable(). */ void sdio_retune_crc_enable(struct sdio_func *func) { diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index dd2a4b6ab6ad..2a2d949a9344 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -23,6 +23,7 @@ struct mmc_gpio { char *ro_label; char *cd_label; u32 cd_debounce_delay_ms; + int cd_irq; }; static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id) @@ -53,12 +54,24 @@ int mmc_gpio_alloc(struct mmc_host *host) ctx->ro_label = devm_kasprintf(host->parent, GFP_KERNEL, "%s ro", devname); if (!ctx->ro_label) return -ENOMEM; + ctx->cd_irq = -EINVAL; host->slot.handler_priv = ctx; host->slot.cd_irq = -EINVAL; return 0; } +void mmc_gpio_set_cd_irq(struct mmc_host *host, int irq) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + if (!ctx || irq < 0) + return; + + ctx->cd_irq = irq; +} +EXPORT_SYMBOL(mmc_gpio_set_cd_irq); + int mmc_gpio_get_ro(struct mmc_host *host) { struct mmc_gpio *ctx = host->slot.handler_priv; @@ -98,7 +111,9 @@ void mmc_gpiod_request_cd_irq(struct mmc_host *host) * Do not use IRQ if the platform prefers to poll, e.g., because that * IRQ number is already used by another unit and cannot be shared. */ - if (!(host->caps & MMC_CAP_NEEDS_POLL)) + if (ctx->cd_irq >= 0) + irq = ctx->cd_irq; + else if (!(host->caps & MMC_CAP_NEEDS_POLL)) irq = gpiod_to_irq(ctx->cd_gpio); if (irq >= 0) { diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index e13b0b0b8ebb..4745fe217ade 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -348,6 +348,7 @@ config MMC_SDHCI_PXAV2 depends on MMC_SDHCI_PLTFM depends on ARCH_MMP || COMPILE_TEST default CPU_PXA910 + select MMC_SDHCI_IO_ACCESSORS help This selects the Marvell(R) PXAV2 SD Host Controller. If you have a PXA9XX platform with SD Host Controller @@ -816,6 +817,16 @@ config MMC_DW_ROCKCHIP Synopsys DesignWare Memory Card Interface driver. Select this option for platforms based on RK3066, RK3188 and RK3288 SoC's. +config MMC_DW_STARFIVE + tristate "StarFive specific extensions for Synopsys DW Memory Card Interface" + depends on SOC_STARFIVE + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for StarFive JH7110 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on StarFive JH7110 SoC. + config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" depends on SUPERH || ARCH_RENESAS || COMPILE_TEST diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index b498c17cd124..a693fa3d3f1c 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o +obj-$(CONFIG_MMC_DW_STARFIVE) += dw_mmc-starfive.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index bb9bbf1c927b..dd18440a90c5 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1817,7 +1817,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t) atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); state = STATE_WAITING_NOTBUSY; } else if (host->mrq->stop) { - atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); atmci_send_stop_cmd(host, data); state = STATE_SENDING_STOP; } else { @@ -1850,8 +1849,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t) * command to send. */ if (host->mrq->stop) { - atmci_writel(host, ATMCI_IER, - ATMCI_CMDRDY); atmci_send_stop_cmd(host, data); state = STATE_SENDING_STOP; } else { diff --git a/drivers/mmc/host/dw_mmc-starfive.c b/drivers/mmc/host/dw_mmc-starfive.c new file mode 100644 index 000000000000..40f5969b07a6 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-starfive.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * StarFive Designware Mobile Storage Host Controller Driver + * + * Copyright (c) 2022 StarFive Technology Co., Ltd. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +#define ALL_INT_CLR 0x1ffff +#define MAX_DELAY_CHAIN 32 + +struct starfive_priv { + struct device *dev; + struct regmap *reg_syscon; + u32 syscon_offset; + u32 syscon_shift; + u32 syscon_mask; +}; + +static void dw_mci_starfive_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + int ret; + unsigned int clock; + + if (ios->timing == MMC_TIMING_MMC_DDR52 || ios->timing == MMC_TIMING_UHS_DDR50) { + clock = (ios->clock > 50000000 && ios->clock <= 52000000) ? 100000000 : ios->clock; + ret = clk_set_rate(host->ciu_clk, clock); + if (ret) + dev_dbg(host->dev, "Use an external frequency divider %uHz\n", ios->clock); + host->bus_hz = clk_get_rate(host->ciu_clk); + } else { + dev_dbg(host->dev, "Using the internal divider\n"); + } +} + +static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot, + u32 opcode) +{ + static const int grade = MAX_DELAY_CHAIN; + struct dw_mci *host = slot->host; + struct starfive_priv *priv = host->priv; + int rise_point = -1, fall_point = -1; + int err, prev_err; + int i; + bool found = 0; + u32 regval; + + /* + * Use grade as the max delay chain, and use the rise_point and + * fall_point to ensure the best sampling point of a data input + * signals. + */ + for (i = 0; i < grade; i++) { + regval = i << priv->syscon_shift; + err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset, + priv->syscon_mask, regval); + if (err) + return err; + mci_writel(host, RINTSTS, ALL_INT_CLR); + + err = mmc_send_tuning(slot->mmc, opcode, NULL); + if (!err) + found = 1; + + if (i > 0) { + if (err && !prev_err) + fall_point = i - 1; + if (!err && prev_err) + rise_point = i; + } + + if (rise_point != -1 && fall_point != -1) + goto tuning_out; + + prev_err = err; + err = 0; + } + +tuning_out: + if (found) { + if (rise_point == -1) + rise_point = 0; + if (fall_point == -1) + fall_point = grade - 1; + if (fall_point < rise_point) { + if ((rise_point + fall_point) > + (grade - 1)) + i = fall_point / 2; + else + i = (rise_point + grade - 1) / 2; + } else { + i = (rise_point + fall_point) / 2; + } + + regval = i << priv->syscon_shift; + err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset, + priv->syscon_mask, regval); + if (err) + return err; + mci_writel(host, RINTSTS, ALL_INT_CLR); + + dev_info(host->dev, "Found valid delay chain! use it [delay=%d]\n", i); + } else { + dev_err(host->dev, "No valid delay chain! use default\n"); + err = -EINVAL; + } + + mci_writel(host, RINTSTS, ALL_INT_CLR); + return err; +} + +static int dw_mci_starfive_parse_dt(struct dw_mci *host) +{ + struct of_phandle_args args; + struct starfive_priv *priv; + int ret; + + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + ret = of_parse_phandle_with_fixed_args(host->dev->of_node, + "starfive,sysreg", 3, 0, &args); + if (ret) { + dev_err(host->dev, "Failed to parse starfive,sysreg\n"); + return -EINVAL; + } + + priv->reg_syscon = syscon_node_to_regmap(args.np); + of_node_put(args.np); + if (IS_ERR(priv->reg_syscon)) + return PTR_ERR(priv->reg_syscon); + + priv->syscon_offset = args.args[0]; + priv->syscon_shift = args.args[1]; + priv->syscon_mask = args.args[2]; + + host->priv = priv; + + return 0; +} + +static const struct dw_mci_drv_data starfive_data = { + .common_caps = MMC_CAP_CMD23, + .set_ios = dw_mci_starfive_set_ios, + .parse_dt = dw_mci_starfive_parse_dt, + .execute_tuning = dw_mci_starfive_execute_tuning, +}; + +static const struct of_device_id dw_mci_starfive_match[] = { + { .compatible = "starfive,jh7110-mmc", + .data = &starfive_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_starfive_match); + +static int dw_mci_starfive_probe(struct platform_device *pdev) +{ + return dw_mci_pltfm_register(pdev, &starfive_data); +} + +static struct platform_driver dw_mci_starfive_driver = { + .probe = dw_mci_starfive_probe, + .remove = dw_mci_pltfm_remove, + .driver = { + .name = "dwmmc_starfive", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .of_match_table = dw_mci_starfive_match, + }, +}; +module_platform_driver(dw_mci_starfive_driver); + +MODULE_DESCRIPTION("StarFive JH7110 Specific DW-MSHC Driver Extension"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:dwmmc_starfive"); diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index eda1e2ddcaca..698450afa7bb 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -21,6 +21,7 @@ #include <linux/of_device.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/scatterlist.h> #include <asm/cacheflush.h> @@ -158,6 +159,8 @@ struct jz4740_mmc_host { struct mmc_request *req; struct mmc_command *cmd; + bool vqmmc_enabled; + unsigned long waiting; uint32_t cmdat; @@ -935,6 +938,8 @@ static void jz4740_mmc_request(struct mmc_host *mmc, struct mmc_request *req) static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct jz4740_mmc_host *host = mmc_priv(mmc); + int ret; + if (ios->clock) jz4740_mmc_set_clock_rate(host, ios->clock); @@ -947,12 +952,25 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk_prepare_enable(host->clk); break; case MMC_POWER_ON: + if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { + ret = regulator_enable(mmc->supply.vqmmc); + if (ret) + dev_err(&host->pdev->dev, "Failed to set vqmmc power!\n"); + else + host->vqmmc_enabled = true; + } break; - default: + case MMC_POWER_OFF: if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { + regulator_disable(mmc->supply.vqmmc); + host->vqmmc_enabled = false; + } clk_disable_unprepare(host->clk); break; + default: + break; } switch (ios->bus_width) { @@ -978,6 +996,23 @@ static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_SDIO, enable); } +static int jz4740_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) +{ + int ret; + + /* vqmmc regulator is available */ + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = mmc_regulator_set_vqmmc(mmc, ios); + return ret < 0 ? ret : 0; + } + + /* no vqmmc regulator, assume fixed regulator at 3/3.3V */ + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) + return 0; + + return -EINVAL; +} + static const struct mmc_host_ops jz4740_mmc_ops = { .request = jz4740_mmc_request, .pre_req = jz4740_mmc_pre_request, @@ -986,6 +1021,7 @@ static const struct mmc_host_ops jz4740_mmc_ops = { .get_ro = mmc_gpio_get_ro, .get_cd = mmc_gpio_get_cd, .enable_sdio_irq = jz4740_mmc_enable_sdio_irq, + .start_signal_voltage_switch = jz4740_voltage_switch, }; static const struct of_device_id jz4740_mmc_of_match[] = { diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 5c94ad4661ce..2b963a81c2ad 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -150,12 +150,11 @@ struct sd_emmc_desc { struct meson_host { struct device *dev; - struct meson_mmc_data *data; + const struct meson_mmc_data *data; struct mmc_host *mmc; struct mmc_command *cmd; void __iomem *regs; - struct clk *core_clk; struct clk *mux_clk; struct clk *mmc_clk; unsigned long req_rate; @@ -1083,20 +1082,6 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) return IRQ_HANDLED; } -/* - * NOTE: we only need this until the GPIO/pinctrl driver can handle - * interrupts. For now, the MMC core will use this for polling. - */ -static int meson_mmc_get_cd(struct mmc_host *mmc) -{ - int status = mmc_gpio_get_cd(mmc); - - if (status == -ENOSYS) - return 1; /* assume present */ - - return status; -} - static void meson_mmc_cfg_init(struct meson_host *host) { u32 cfg = 0; @@ -1165,7 +1150,7 @@ static void meson_mmc_ack_sdio_irq(struct mmc_host *mmc) static const struct mmc_host_ops meson_mmc_ops = { .request = meson_mmc_request, .set_ios = meson_mmc_set_ios, - .get_cd = meson_mmc_get_cd, + .get_cd = mmc_gpio_get_cd, .pre_req = meson_mmc_pre_req, .post_req = meson_mmc_post_req, .execute_tuning = meson_mmc_resampling_tuning, @@ -1180,9 +1165,10 @@ static int meson_mmc_probe(struct platform_device *pdev) struct resource *res; struct meson_host *host; struct mmc_host *mmc; - int ret; + struct clk *core_clk; + int cd_irq, ret; - mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev); + mmc = devm_mmc_alloc_host(&pdev->dev, sizeof(struct meson_host)); if (!mmc) return -ENOMEM; host = mmc_priv(mmc); @@ -1198,51 +1184,39 @@ static int meson_mmc_probe(struct platform_device *pdev) host->vqmmc_enabled = false; ret = mmc_regulator_get_supply(mmc); if (ret) - goto free_host; + return ret; ret = mmc_of_parse(mmc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_warn(&pdev->dev, "error parsing DT: %d\n", ret); - goto free_host; - } + if (ret) + return dev_err_probe(&pdev->dev, ret, "error parsing DT\n"); mmc->caps |= MMC_CAP_CMD23; if (mmc->caps & MMC_CAP_SDIO_IRQ) mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; - host->data = (struct meson_mmc_data *) - of_device_get_match_data(&pdev->dev); - if (!host->data) { - ret = -EINVAL; - goto free_host; - } + host->data = of_device_get_match_data(&pdev->dev); + if (!host->data) + return -EINVAL; ret = device_reset_optional(&pdev->dev); - if (ret) { - dev_err_probe(&pdev->dev, ret, "device reset failed\n"); - goto free_host; - } + if (ret) + return dev_err_probe(&pdev->dev, ret, "device reset failed\n"); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(host->regs)) { - ret = PTR_ERR(host->regs); - goto free_host; - } + host->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(host->regs)) + return PTR_ERR(host->regs); host->irq = platform_get_irq(pdev, 0); - if (host->irq <= 0) { - ret = -EINVAL; - goto free_host; - } + if (host->irq <= 0) + return -EINVAL; + + cd_irq = platform_get_irq_optional(pdev, 1); + mmc_gpio_set_cd_irq(mmc, cd_irq); host->pinctrl = devm_pinctrl_get(&pdev->dev); - if (IS_ERR(host->pinctrl)) { - ret = PTR_ERR(host->pinctrl); - goto free_host; - } + if (IS_ERR(host->pinctrl)) + return PTR_ERR(host->pinctrl); host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl, "clk-gate"); @@ -1252,19 +1226,13 @@ static int meson_mmc_probe(struct platform_device *pdev) host->pins_clk_gate = NULL; } - host->core_clk = devm_clk_get(&pdev->dev, "core"); - if (IS_ERR(host->core_clk)) { - ret = PTR_ERR(host->core_clk); - goto free_host; - } - - ret = clk_prepare_enable(host->core_clk); - if (ret) - goto free_host; + core_clk = devm_clk_get_enabled(&pdev->dev, "core"); + if (IS_ERR(core_clk)) + return PTR_ERR(core_clk); ret = meson_mmc_clk_init(host); if (ret) - goto err_core_clk; + return ret; /* set config to sane default */ meson_mmc_cfg_init(host); @@ -1348,10 +1316,6 @@ err_free_irq: free_irq(host->irq, host); err_init_clk: clk_disable_unprepare(host->mmc_clk); -err_core_clk: - clk_disable_unprepare(host->core_clk); -free_host: - mmc_free_host(mmc); return ret; } @@ -1366,9 +1330,7 @@ static int meson_mmc_remove(struct platform_device *pdev) free_irq(host->irq, host); clk_disable_unprepare(host->mmc_clk); - clk_disable_unprepare(host->core_clk); - mmc_free_host(host->mmc); return 0; } diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index 52ed30f2d9f4..2d002c81dcf3 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -611,6 +611,9 @@ static int moxart_probe(struct platform_device *pdev) mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2); mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2); mmc->ocr_avail = 0xffff00; /* Support 2.0v - 3.6v power. */ + mmc->max_blk_size = 2048; /* Max. block length in REG_DATA_CONTROL */ + mmc->max_req_size = DATA_LEN_MASK; /* bits 0-23 in REG_DATA_LENGTH */ + mmc->max_blk_count = mmc->max_req_size / 512; if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) { if (PTR_ERR(host->dma_chan_tx) == -EPROBE_DEFER || @@ -628,6 +631,8 @@ static int moxart_probe(struct platform_device *pdev) } dev_dbg(dev, "PIO mode transfer enabled\n"); host->have_dma = false; + + mmc->max_seg_size = mmc->max_req_size; } else { dev_dbg(dev, "DMA channels found (%p,%p)\n", host->dma_chan_tx, host->dma_chan_rx); @@ -646,6 +651,10 @@ static int moxart_probe(struct platform_device *pdev) cfg.src_addr = host->reg_phys + REG_DATA_WINDOW; cfg.dst_addr = 0; dmaengine_slave_config(host->dma_chan_rx, &cfg); + + mmc->max_seg_size = min3(mmc->max_req_size, + dma_get_max_seg_size(host->dma_chan_rx->device->dev), + dma_get_max_seg_size(host->dma_chan_tx->device->dev)); } if (readl(host->base + REG_BUS_WIDTH) & BUS_WIDTH_4_SUPPORT) diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 29f562115c66..f38003f6b1ca 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -210,6 +210,11 @@ static const struct renesas_sdhi_quirks sdhi_quirks_r8a77990 = { .manual_tap_correction = true, }; +static const struct renesas_sdhi_quirks sdhi_quirks_r9a09g011 = { + .fixed_addr_mode = true, + .hs400_disabled = true, +}; + /* * Note for r8a7796 / r8a774a1: we can't distinguish ES1.1 and 1.2 as of now. * So, we want to treat them equally and only have a match for ES1.2 to enforce @@ -251,6 +256,11 @@ static const struct renesas_sdhi_of_data_with_quirks of_r8a77990_compatible = { .quirks = &sdhi_quirks_r8a77990, }; +static const struct renesas_sdhi_of_data_with_quirks of_r9a09g011_compatible = { + .of_data = &of_data_rcar_gen3, + .quirks = &sdhi_quirks_r9a09g011, +}; + static const struct renesas_sdhi_of_data_with_quirks of_rcar_gen3_compatible = { .of_data = &of_data_rcar_gen3, }; @@ -274,6 +284,7 @@ static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = { { .compatible = "renesas,sdhi-r8a77970", .data = &of_r8a77970_compatible, }, { .compatible = "renesas,sdhi-r8a77990", .data = &of_r8a77990_compatible, }, { .compatible = "renesas,sdhi-r8a77995", .data = &of_rcar_gen3_nohs400_compatible, }, + { .compatible = "renesas,sdhi-r9a09g011", .data = &of_r9a09g011_compatible, }, { .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, }, { .compatible = "renesas,rcar-gen4-sdhi", .data = &of_rcar_gen3_compatible, }, {}, diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index f2cf3d70db79..4c22337199cf 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -255,7 +255,6 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) struct sdhci_brcmstb_priv *priv; u32 actual_clock_mhz; struct sdhci_host *host; - struct resource *iomem; struct clk *clk; struct clk *base_clk = NULL; int res; @@ -291,8 +290,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) } /* Map in the non-standard CFG registers */ - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 1); - priv->cfg_regs = devm_ioremap_resource(&pdev->dev, iomem); + priv->cfg_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); if (IS_ERR(priv->cfg_regs)) { res = PTR_ERR(priv->cfg_regs); goto err; @@ -324,13 +322,11 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) * will allow these modes to be specified by device tree * properties through mmc_of_parse(). */ - host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); + sdhci_read_caps(host); if (match_priv->flags & BRCMSTB_MATCH_FLAGS_NO_64BIT) host->caps &= ~SDHCI_CAN_64BIT; - host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_DDR50); - host->quirks |= SDHCI_QUIRK_MISSING_CAPS; if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT) host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 9e73c34b6401..58f042fdd4f4 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -338,6 +338,16 @@ struct pltfm_imx_data { struct clk *clk_ahb; struct clk *clk_per; unsigned int actual_clock; + + /* + * USDHC has one limition, require the SDIO device a different + * register setting. Driver has to recognize card type during + * the card init, but at this stage, mmc_host->card is not + * available. So involve this field to save the card type + * during card init through usdhc_init_card(). + */ + unsigned int init_card_type; + enum { NO_CMD_PENDING, /* no multiblock command pending */ MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */ @@ -430,9 +440,12 @@ static inline void esdhc_wait_for_card_clock_gate_off(struct sdhci_host *host) } /* Enable the auto tuning circuit to check the CMD line and BUS line */ -static inline void usdhc_auto_tuning_mode_sel(struct sdhci_host *host) +static inline void usdhc_auto_tuning_mode_sel_and_en(struct sdhci_host *host) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); u32 buswidth, auto_tune_buswidth; + u32 reg; buswidth = USDHC_GET_BUSWIDTH(readl(host->ioaddr + SDHCI_HOST_CONTROL)); @@ -448,9 +461,27 @@ static inline void usdhc_auto_tuning_mode_sel(struct sdhci_host *host) break; } + /* + * For USDHC, auto tuning circuit can not handle the async sdio + * device interrupt correctly. When sdio device use 4 data lines, + * async sdio interrupt will use the shared DAT[1], if enable auto + * tuning circuit check these 4 data lines, include the DAT[1], + * this circuit will detect this interrupt, take this as a data on + * DAT[1], and adjust the delay cell wrongly. + * This is the hardware design limitation, to avoid this, for sdio + * device, config the auto tuning circuit only check DAT[0] and CMD + * line. + */ + if (imx_data->init_card_type == MMC_TYPE_SDIO) + auto_tune_buswidth = ESDHC_VEND_SPEC2_AUTO_TUNE_1BIT_EN; + esdhc_clrset_le(host, ESDHC_VEND_SPEC2_AUTO_TUNE_MODE_MASK, auto_tune_buswidth | ESDHC_VEND_SPEC2_AUTO_TUNE_CMD_EN, ESDHC_VEND_SPEC2); + + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); } static u32 esdhc_readl_le(struct sdhci_host *host, int reg) @@ -682,14 +713,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) } else { v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; m &= ~ESDHC_MIX_CTRL_FBCLK_SEL; - m &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; } if (val & SDHCI_CTRL_EXEC_TUNING) { v |= ESDHC_MIX_CTRL_EXE_TUNE; m |= ESDHC_MIX_CTRL_FBCLK_SEL; - m |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; - usdhc_auto_tuning_mode_sel(host); } else { v &= ~ESDHC_MIX_CTRL_EXE_TUNE; } @@ -1023,13 +1051,15 @@ static void esdhc_reset_tuning(struct sdhci_host *host) /* Reset the tuning circuit */ if (esdhc_is_usdhc(imx_data)) { + ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL); + ctrl &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { - ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL); ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; ctrl &= ~ESDHC_MIX_CTRL_FBCLK_SEL; writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL); writel(0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL); ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE; @@ -1052,9 +1082,19 @@ static void esdhc_reset_tuning(struct sdhci_host *host) } } +static void usdhc_init_card(struct mmc_host *mmc, struct mmc_card *card) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + + imx_data->init_card_type = card->type; +} + static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); + int err; /* * i.MX uSDHC internally already uses a fixed optimized timing for @@ -1069,7 +1109,12 @@ static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) * correct delay cell. */ esdhc_reset_tuning(host); - return sdhci_execute_tuning(mmc, opcode); + err = sdhci_execute_tuning(mmc, opcode); + /* If tuning done, enable auto tuning */ + if (!err && !host->tuning_err) + usdhc_auto_tuning_mode_sel_and_en(host); + + return err; } static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val) @@ -1103,11 +1148,8 @@ static void esdhc_post_tuning(struct sdhci_host *host) { u32 reg; - usdhc_auto_tuning_mode_sel(host); - reg = readl(host->ioaddr + ESDHC_MIX_CTRL); reg &= ~ESDHC_MIX_CTRL_EXE_TUNE; - reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; writel(reg, host->ioaddr + ESDHC_MIX_CTRL); } @@ -1674,6 +1716,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) * to replace the standard one in sdhci_ops. */ host->mmc_host_ops.execute_tuning = usdhc_execute_tuning; + + /* + * Link usdhc specific mmc_host_ops init card function, + * to distinguish the card type. + */ + host->mmc_host_ops.init_card = usdhc_init_card; } err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data); diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c index 6db35b1b8557..86eb0045515e 100644 --- a/drivers/mmc/host/sdhci-iproc.c +++ b/drivers/mmc/host/sdhci-iproc.c @@ -18,6 +18,7 @@ struct sdhci_iproc_data { u32 caps; u32 caps1; u32 mmc_caps; + bool missing_caps; }; struct sdhci_iproc_host { @@ -251,7 +252,6 @@ static const struct sdhci_iproc_data iproc_data = { static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = { .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | - SDHCI_QUIRK_MISSING_CAPS | SDHCI_QUIRK_NO_HISPD_BIT, .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, .ops = &sdhci_iproc_32only_ops, @@ -266,6 +266,7 @@ static const struct sdhci_iproc_data bcm2835_data = { .caps1 = SDHCI_DRIVER_TYPE_A | SDHCI_DRIVER_TYPE_C, .mmc_caps = 0x00000000, + .missing_caps = true, }; static const struct sdhci_ops sdhci_iproc_bcm2711_ops = { @@ -295,8 +296,7 @@ static const struct sdhci_iproc_data bcm2711_data = { }; static const struct sdhci_pltfm_data sdhci_bcm7211a0_pltfm_data = { - .quirks = SDHCI_QUIRK_MISSING_CAPS | - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_BROKEN_DMA | SDHCI_QUIRK_BROKEN_ADMA, .ops = &sdhci_iproc_ops, @@ -315,6 +315,7 @@ static const struct sdhci_iproc_data bcm7211a0_data = { SDHCI_CAN_DO_HISPD, .caps1 = SDHCI_DRIVER_TYPE_C | SDHCI_DRIVER_TYPE_D, + .missing_caps = true, }; static const struct of_device_id sdhci_iproc_of_match[] = { @@ -397,9 +398,10 @@ static int sdhci_iproc_probe(struct platform_device *pdev) } } - if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) { - host->caps = iproc_host->data->caps; - host->caps1 = iproc_host->data->caps1; + if (iproc_host->data->missing_caps) { + __sdhci_read_caps(host, NULL, + &iproc_host->data->caps, + &iproc_host->data->caps1); } ret = sdhci_add_host(host); diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index a7343d4bc50e..d1490469184b 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -48,6 +48,7 @@ #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL 29 #define DWCMSHC_EMMC_DLL_START_POINT 16 #define DWCMSHC_EMMC_DLL_INC 8 +#define DWCMSHC_EMMC_DLL_BYPASS BIT(24) #define DWCMSHC_EMMC_DLL_DLYENA BIT(27) #define DLL_TXCLK_TAPNUM_DEFAULT 0x10 #define DLL_TXCLK_TAPNUM_90_DEGREES 0xA @@ -60,6 +61,7 @@ #define DLL_RXCLK_NO_INVERTER 1 #define DLL_RXCLK_INVERTER 0 #define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8 +#define DLL_RXCLK_ORI_GATE BIT(31) #define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24) #define DLL_CMDOUT_SRC_CLK_NEG BIT(28) #define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29) @@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock sdhci_writel(host, extra, reg); if (clock <= 52000000) { - /* Disable DLL and reset both of sample and drive clock */ - sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL); - sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK); + /* + * Disable DLL and reset both of sample and drive clock. + * The bypass bit and start bit need to be set if DLL is not locked. + */ + sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL); + sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK); sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK); sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT); /* @@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock } extra = 0x1 << 16 | /* tune clock stop en */ - 0x2 << 17 | /* pre-change delay */ + 0x3 << 17 | /* pre-change delay */ 0x3 << 19; /* post-change delay */ sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL); @@ -446,6 +451,7 @@ static const struct acpi_device_id sdhci_dwcmshc_acpi_ids[] = { }, {} }; +MODULE_DEVICE_TABLE(acpi, sdhci_dwcmshc_acpi_ids); #endif static int dwcmshc_probe(struct platform_device *pdev) @@ -528,6 +534,11 @@ static int dwcmshc_probe(struct platform_device *pdev) goto err_clk; } +#ifdef CONFIG_ACPI + if (pltfm_data == &sdhci_dwcmshc_bf3_pdata) + sdhci_enable_v4_mode(host); +#endif + host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; err = sdhci_setup_host(host); diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index c359f867df0a..01975d145200 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -251,13 +251,16 @@ static int ricoh_probe(struct sdhci_pci_chip *chip) static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot) { - slot->host->caps = + u32 caps = FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) | FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) | SDHCI_TIMEOUT_CLK_UNIT | SDHCI_CAN_VDD_330 | SDHCI_CAN_DO_HISPD | SDHCI_CAN_DO_SDMA; + u32 caps1 = 0; + + __sdhci_read_caps(slot->host, NULL, &caps, &caps1); return 0; } @@ -286,8 +289,7 @@ static const struct sdhci_pci_fixes sdhci_ricoh_mmc = { #endif .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_CLOCK_BEFORE_RESET | - SDHCI_QUIRK_NO_CARD_NO_RESET | - SDHCI_QUIRK_MISSING_CAPS + SDHCI_QUIRK_NO_CARD_NO_RESET, }; static void ene_714_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c index f18906b5575f..fc306eb1f845 100644 --- a/drivers/mmc/host/sdhci-pxav2.c +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -20,6 +20,9 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/mmc.h> +#include <linux/pinctrl/consumer.h> #include "sdhci.h" #include "sdhci-pltfm.h" @@ -41,6 +44,13 @@ #define MMC_CARD 0x1000 #define MMC_WIDTH 0x0100 +struct sdhci_pxav2_host { + struct mmc_request *sdio_mrq; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_cmd_gpio; +}; + static void pxav2_reset(struct sdhci_host *host, u8 mask) { struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); @@ -80,6 +90,71 @@ static void pxav2_reset(struct sdhci_host *host, u8 mask) } } +static u16 pxav1_readw(struct sdhci_host *host, int reg) +{ + /* Workaround for data abort exception on SDH2 and SDH4 on PXA168 */ + if (reg == SDHCI_HOST_VERSION) + return readl(host->ioaddr + SDHCI_HOST_VERSION - 2) >> 16; + + return readw(host->ioaddr + reg); +} + +static u32 pxav1_irq(struct sdhci_host *host, u32 intmask) +{ + struct sdhci_pxav2_host *pxav2_host = sdhci_pltfm_priv(sdhci_priv(host)); + struct mmc_request *sdio_mrq; + + if (pxav2_host->sdio_mrq && (intmask & SDHCI_INT_CMD_MASK)) { + /* The dummy CMD0 for the SDIO workaround just completed */ + sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, SDHCI_INT_STATUS); + intmask &= ~SDHCI_INT_CMD_MASK; + + /* Restore MMC function to CMD pin */ + if (pxav2_host->pinctrl && pxav2_host->pins_default) + pinctrl_select_state(pxav2_host->pinctrl, pxav2_host->pins_default); + + sdio_mrq = pxav2_host->sdio_mrq; + pxav2_host->sdio_mrq = NULL; + mmc_request_done(host->mmc, sdio_mrq); + } + + return intmask; +} + +static void pxav1_request_done(struct sdhci_host *host, struct mmc_request *mrq) +{ + u16 tmp; + struct sdhci_pxav2_host *pxav2_host; + + /* If this is an SDIO command, perform errata workaround for silicon bug */ + if (mrq->cmd && !mrq->cmd->error && + (mrq->cmd->opcode == SD_IO_RW_DIRECT || + mrq->cmd->opcode == SD_IO_RW_EXTENDED)) { + /* Reset data port */ + tmp = readw(host->ioaddr + SDHCI_TIMEOUT_CONTROL); + tmp |= 0x400; + writew(tmp, host->ioaddr + SDHCI_TIMEOUT_CONTROL); + + /* Clock is now stopped, so restart it by sending a dummy CMD0 */ + pxav2_host = sdhci_pltfm_priv(sdhci_priv(host)); + pxav2_host->sdio_mrq = mrq; + + /* Set CMD as high output rather than MMC function while we do CMD0 */ + if (pxav2_host->pinctrl && pxav2_host->pins_cmd_gpio) + pinctrl_select_state(pxav2_host->pinctrl, pxav2_host->pins_cmd_gpio); + + sdhci_writel(host, 0, SDHCI_ARGUMENT); + sdhci_writew(host, 0, SDHCI_TRANSFER_MODE); + sdhci_writew(host, SDHCI_MAKE_CMD(MMC_GO_IDLE_STATE, SDHCI_CMD_RESP_NONE), + SDHCI_COMMAND); + + /* Don't finish this request until the dummy CMD0 finishes */ + return; + } + + mmc_request_done(host->mmc, mrq); +} + static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width) { u8 ctrl; @@ -101,6 +176,27 @@ static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width) writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); } +struct sdhci_pxa_variant { + const struct sdhci_ops *ops; + unsigned int extra_quirks; +}; + +static const struct sdhci_ops pxav1_sdhci_ops = { + .read_w = pxav1_readw, + .set_clock = sdhci_set_clock, + .irq = pxav1_irq, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .set_bus_width = pxav2_mmc_set_bus_width, + .reset = pxav2_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .request_done = pxav1_request_done, +}; + +static const struct sdhci_pxa_variant __maybe_unused pxav1_variant = { + .ops = &pxav1_sdhci_ops, + .extra_quirks = SDHCI_QUIRK_NO_BUSY_IRQ | SDHCI_QUIRK_32BIT_DMA_SIZE, +}; + static const struct sdhci_ops pxav2_sdhci_ops = { .set_clock = sdhci_set_clock, .get_max_clock = sdhci_pltfm_clk_get_max_clock, @@ -109,11 +205,14 @@ static const struct sdhci_ops pxav2_sdhci_ops = { .set_uhs_signaling = sdhci_set_uhs_signaling, }; +static const struct sdhci_pxa_variant pxav2_variant = { + .ops = &pxav2_sdhci_ops, +}; + #ifdef CONFIG_OF static const struct of_device_id sdhci_pxav2_of_match[] = { - { - .compatible = "mrvl,pxav2-mmc", - }, + { .compatible = "mrvl,pxav1-mmc", .data = &pxav1_variant, }, + { .compatible = "mrvl,pxav2-mmc", .data = &pxav2_variant, }, {}, }; MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match); @@ -155,40 +254,53 @@ static int sdhci_pxav2_probe(struct platform_device *pdev) { struct sdhci_pltfm_host *pltfm_host; struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + struct sdhci_pxav2_host *pxav2_host; struct device *dev = &pdev->dev; struct sdhci_host *host = NULL; - const struct of_device_id *match; + const struct sdhci_pxa_variant *variant; int ret; - struct clk *clk; + struct clk *clk, *clk_core; - host = sdhci_pltfm_init(pdev, NULL, 0); + host = sdhci_pltfm_init(pdev, NULL, sizeof(*pxav2_host)); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); + pxav2_host = sdhci_pltfm_priv(pltfm_host); - clk = devm_clk_get(dev, "PXA-SDHCLK"); + clk = devm_clk_get(dev, "io"); + if (IS_ERR(clk) && PTR_ERR(clk) != -EPROBE_DEFER) + clk = devm_clk_get(dev, NULL); if (IS_ERR(clk)) { - dev_err(dev, "failed to get io clock\n"); ret = PTR_ERR(clk); + dev_err_probe(dev, ret, "failed to get io clock\n"); goto free; } pltfm_host->clk = clk; ret = clk_prepare_enable(clk); if (ret) { - dev_err(&pdev->dev, "failed to enable io clock\n"); + dev_err(dev, "failed to enable io clock\n"); goto free; } + clk_core = devm_clk_get_optional_enabled(dev, "core"); + if (IS_ERR(clk_core)) { + ret = PTR_ERR(clk_core); + dev_err_probe(dev, ret, "failed to enable core clock\n"); + goto disable_clk; + } + host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; - match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev); - if (match) { + variant = of_device_get_match_data(dev); + if (variant) pdata = pxav2_get_mmc_pdata(dev); - } + else + variant = &pxav2_variant; + if (pdata) { if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { /* on-chip device */ @@ -208,7 +320,23 @@ static int sdhci_pxav2_probe(struct platform_device *pdev) host->mmc->pm_caps |= pdata->pm_caps; } - host->ops = &pxav2_sdhci_ops; + host->quirks |= variant->extra_quirks; + host->ops = variant->ops; + + /* Set up optional pinctrl for PXA168 SDIO IRQ fix */ + pxav2_host->pinctrl = devm_pinctrl_get(dev); + if (!IS_ERR(pxav2_host->pinctrl)) { + pxav2_host->pins_cmd_gpio = pinctrl_lookup_state(pxav2_host->pinctrl, + "state_cmd_gpio"); + if (IS_ERR(pxav2_host->pins_cmd_gpio)) + pxav2_host->pins_cmd_gpio = NULL; + pxav2_host->pins_default = pinctrl_lookup_state(pxav2_host->pinctrl, + "default"); + if (IS_ERR(pxav2_host->pins_default)) + pxav2_host->pins_default = NULL; + } else { + pxav2_host->pinctrl = NULL; + } ret = sdhci_add_host(host); if (ret) diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index a6d89a3f1946..e39dcc998772 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -124,10 +124,8 @@ static int armada_38x_quirks(struct platform_device *pdev, struct resource *res; host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; - host->quirks |= SDHCI_QUIRK_MISSING_CAPS; - host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); - host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); + sdhci_read_caps(host); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "conf-sdio3"); diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 525f979e2a97..7f4ee2e12735 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -553,8 +553,7 @@ static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host, static const struct sdhci_pltfm_data sdhci_sprd_pdata = { .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | - SDHCI_QUIRK_MISSING_CAPS, + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, .quirks2 = SDHCI_QUIRK2_BROKEN_HS200 | SDHCI_QUIRK2_USE_32BIT_BLK_CNT | SDHCI_QUIRK2_PRESET_VALUE_BROKEN, @@ -671,8 +670,7 @@ static int sdhci_sprd_probe(struct platform_device *pdev) * will allow these modes to be specified only by device * tree properties through mmc_of_parse(). */ - host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); - host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); + sdhci_read_caps(host); host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_DDR50); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index f3af1bd0f7b9..3241916141d7 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -4121,9 +4121,6 @@ void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver, v = ver ? *ver : sdhci_readw(host, SDHCI_HOST_VERSION); host->version = (v & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; - if (host->quirks & SDHCI_QUIRK_MISSING_CAPS) - return; - if (caps) { host->caps = *caps; } else { diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 605eaee805f7..f4f2085c274c 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -423,8 +423,6 @@ struct sdhci_host { #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) /* Controller cannot support End Attribute in NOP ADMA descriptor */ #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) -/* Controller is missing device caps. Use caps provided by host */ -#define SDHCI_QUIRK_MISSING_CAPS (1<<27) /* Controller uses Auto CMD12 command to stop the transfer */ #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) /* Controller doesn't have HISPD bit field in HI-SPEED SD card */ diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c index 3a8defdcca77..61acd69fac0e 100644 --- a/drivers/mmc/host/uniphier-sd.c +++ b/drivers/mmc/host/uniphier-sd.c @@ -8,6 +8,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/dma-mapping.h> +#include <linux/mfd/syscon.h> #include <linux/mfd/tmio.h> #include <linux/mmc/host.h> #include <linux/module.h> @@ -15,6 +16,7 @@ #include <linux/of_device.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/reset.h> #include "tmio_mmc.h" @@ -48,6 +50,12 @@ #define UNIPHIER_SD_DMA_ADDR_L 0x440 #define UNIPHIER_SD_DMA_ADDR_H 0x444 +/* SD control */ +#define UNIPHIER_SDCTRL_CHOFFSET 0x200 +#define UNIPHIER_SDCTRL_MODE 0x30 +#define UNIPHIER_SDCTRL_MODE_UHS1MOD BIT(15) +#define UNIPHIER_SDCTRL_MODE_SDRSEL BIT(14) + /* * IP is extended to support various features: built-in DMA engine, * 1/1024 divisor, etc. @@ -66,6 +74,8 @@ struct uniphier_sd_priv { struct reset_control *rst_hw; struct dma_chan *chan; enum dma_data_direction dma_dir; + struct regmap *sdctrl_regmap; + u32 sdctrl_ch; unsigned long clk_rate; unsigned long caps; }; @@ -420,6 +430,42 @@ static void uniphier_sd_hw_reset(struct mmc_host *mmc) usleep_range(300, 1000); } +static void uniphier_sd_speed_switch(struct tmio_mmc_host *host) +{ + struct uniphier_sd_priv *priv = uniphier_sd_priv(host); + unsigned int offset; + u32 val = 0; + + if (!(host->mmc->caps & MMC_CAP_UHS)) + return; + + if (host->mmc->ios.timing == MMC_TIMING_UHS_SDR50 || + host->mmc->ios.timing == MMC_TIMING_UHS_SDR104) + val = UNIPHIER_SDCTRL_MODE_SDRSEL; + + offset = UNIPHIER_SDCTRL_CHOFFSET * priv->sdctrl_ch + + UNIPHIER_SDCTRL_MODE; + regmap_write_bits(priv->sdctrl_regmap, offset, + UNIPHIER_SDCTRL_MODE_SDRSEL, val); +} + +static void uniphier_sd_uhs_enable(struct tmio_mmc_host *host, bool uhs_en) +{ + struct uniphier_sd_priv *priv = uniphier_sd_priv(host); + unsigned int offset; + u32 val; + + if (!(host->mmc->caps & MMC_CAP_UHS)) + return; + + val = (uhs_en) ? UNIPHIER_SDCTRL_MODE_UHS1MOD : 0; + + offset = UNIPHIER_SDCTRL_CHOFFSET * priv->sdctrl_ch + + UNIPHIER_SDCTRL_MODE; + regmap_write_bits(priv->sdctrl_regmap, offset, + UNIPHIER_SDCTRL_MODE_UHS1MOD, val); +} + static void uniphier_sd_set_clock(struct tmio_mmc_host *host, unsigned int clock) { @@ -433,6 +479,8 @@ static void uniphier_sd_set_clock(struct tmio_mmc_host *host, tmp &= ~CLK_CTL_SCLKEN; writel(tmp, host->ctl + (CTL_SD_CARD_CLK_CTL << 1)); + uniphier_sd_speed_switch(host); + if (clock == 0) return; @@ -500,14 +548,17 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc, struct uniphier_sd_priv *priv = uniphier_sd_priv(host); struct pinctrl_state *pinstate = NULL; u32 val, tmp; + bool uhs_en; switch (ios->signal_voltage) { case MMC_SIGNAL_VOLTAGE_330: val = UNIPHIER_SD_VOLT_330; + uhs_en = false; break; case MMC_SIGNAL_VOLTAGE_180: val = UNIPHIER_SD_VOLT_180; pinstate = priv->pinstate_uhs; + uhs_en = true; break; default: return -ENOTSUPP; @@ -523,12 +574,19 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc, else pinctrl_select_default_state(mmc_dev(mmc)); + uniphier_sd_uhs_enable(host, uhs_en); + return 0; } -static int uniphier_sd_uhs_init(struct tmio_mmc_host *host, - struct uniphier_sd_priv *priv) +static int uniphier_sd_uhs_init(struct tmio_mmc_host *host) { + struct uniphier_sd_priv *priv = uniphier_sd_priv(host); + struct device *dev = &host->pdev->dev; + struct device_node *np = dev->of_node; + struct of_phandle_args args; + int ret; + priv->pinctrl = devm_pinctrl_get(mmc_dev(host->mmc)); if (IS_ERR(priv->pinctrl)) return PTR_ERR(priv->pinctrl); @@ -537,8 +595,20 @@ static int uniphier_sd_uhs_init(struct tmio_mmc_host *host, if (IS_ERR(priv->pinstate_uhs)) return PTR_ERR(priv->pinstate_uhs); - host->ops.start_signal_voltage_switch = - uniphier_sd_start_signal_voltage_switch; + ret = of_parse_phandle_with_fixed_args(np, + "socionext,syscon-uhs-mode", + 1, 0, &args); + if (ret) { + dev_err(dev, "Can't get syscon-uhs-mode property\n"); + return ret; + } + priv->sdctrl_regmap = syscon_node_to_regmap(args.np); + of_node_put(args.np); + if (IS_ERR(priv->sdctrl_regmap)) { + dev_err(dev, "Can't map syscon-uhs-mode\n"); + return PTR_ERR(priv->sdctrl_regmap); + } + priv->sdctrl_ch = args.args[0]; return 0; } @@ -601,12 +671,15 @@ static int uniphier_sd_probe(struct platform_device *pdev) } if (host->mmc->caps & MMC_CAP_UHS) { - ret = uniphier_sd_uhs_init(host, priv); + ret = uniphier_sd_uhs_init(host); if (ret) { dev_warn(dev, "failed to setup UHS (error %d). Disabling UHS.", ret); host->mmc->caps &= ~MMC_CAP_UHS; + } else { + host->ops.start_signal_voltage_switch = + uniphier_sd_start_signal_voltage_switch; } } diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 8fdd3cf971a3..812e6b583b25 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -527,6 +527,7 @@ struct mmc_host { struct device_node; struct mmc_host *mmc_alloc_host(int extra, struct device *); +struct mmc_host *devm_mmc_alloc_host(struct device *dev, int extra); int mmc_add_host(struct mmc_host *); void mmc_remove_host(struct mmc_host *); void mmc_free_host(struct mmc_host *); diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index 4ae2f2908f99..5d3d15e97868 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -15,6 +15,7 @@ struct mmc_host; int mmc_gpio_get_ro(struct mmc_host *host); int mmc_gpio_get_cd(struct mmc_host *host); +void mmc_gpio_set_cd_irq(struct mmc_host *host, int irq); int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, unsigned int debounce); |