summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.yaml31
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-sysregs.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.yaml54
-rw-r--r--Documentation/devicetree/bindings/arm/qcom.yaml44
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.yaml9
-rw-r--r--Documentation/devicetree/bindings/arm/sprd/sprd.yaml (renamed from Documentation/devicetree/bindings/arm/sprd.yaml)2
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi.yaml23
-rw-r--r--Documentation/devicetree/bindings/arm/ux500.yaml36
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml76
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml67
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml59
-rw-r--r--Documentation/devicetree/bindings/clock/sun8i-de2.txt34
-rw-r--r--Documentation/devicetree/bindings/clock/sun9i-de.txt28
-rw-r--r--Documentation/devicetree/bindings/clock/sun9i-usb.txt24
-rw-r--r--Documentation/devicetree/bindings/display/mxsfb.txt1
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-xdma.txt4
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt2
-rw-r--r--Documentation/devicetree/bindings/media/atmel-isi.txt2
-rw-r--r--Documentation/devicetree/bindings/media/fsl-pxp.txt2
-rw-r--r--Documentation/devicetree/bindings/media/rc.yaml1
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt374
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml528
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml130
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-gpbr.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-matrix.txt1
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-smc.txt1
-rw-r--r--Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt1
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-nand.txt1
-rw-r--r--Documentation/devicetree/bindings/net/can/atmel-can.txt3
-rw-r--r--Documentation/devicetree/bindings/net/can/rcar_can.txt5
-rw-r--r--Documentation/devicetree/bindings/net/can/rcar_canfd.txt5
-rw-r--r--Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml42
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml3
-rw-r--r--Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml51
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,tmu.txt1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--MAINTAINERS1
-rw-r--r--arch/arm/boot/dts/Makefile26
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts40
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts38
-rw-r--r--arch/arm/boot/dts/am335x-icev2.dts13
-rw-r--r--arch/arm/boot/dts/am33xx-l4.dtsi16
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi69
-rw-r--r--arch/arm/boot/dts/am3517.dtsi2
-rw-r--r--arch/arm/boot/dts/am3703.dtsi14
-rw-r--r--arch/arm/boot/dts/am3715.dtsi10
-rw-r--r--arch/arm/boot/dts/am4372.dtsi142
-rw-r--r--arch/arm/boot/dts/am437x-l4.dtsi29
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi59
-rw-r--r--arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts115
-rw-r--r--arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts79
-rw-r--r--arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi450
-rw-r--r--arch/arm/boot/dts/armada-388-clearfog.dtsi11
-rw-r--r--arch/arm/boot/dts/armada-388-helios4.dts5
-rw-r--r--arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi13
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts1
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts1
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts1
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts20
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts2
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-swift.dts2
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts18
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts2
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi21
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi49
-rw-r--r--arch/arm/boot/dts/aspeed-g6.dtsi2
-rw-r--r--arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi1
-rw-r--r--arch/arm/boot/dts/at91-kizbox.dts172
-rw-r--r--arch/arm/boot/dts/at91-kizboxmini-base.dts24
-rw-r--r--arch/arm/boot/dts/at91-kizboxmini-common.dtsi (renamed from arch/arm/boot/dts/at91-kizboxmini.dts)163
-rw-r--r--arch/arm/boot/dts/at91-kizboxmini-mb.dts26
-rw-r--r--arch/arm/boot/dts/at91-kizboxmini-rd.dts49
-rw-r--r--arch/arm/boot/dts/at91-nattis-2-natte-2.dts1
-rw-r--r--arch/arm/boot/dts/at91-sam9x60ek.dts647
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts6
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi304
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts270
-rw-r--r--arch/arm/boot/dts/at91-smartkiz.dts109
-rw-r--r--arch/arm/boot/dts/at91sam9260.dtsi16
-rw-r--r--arch/arm/boot/dts/at91sam9261.dtsi6
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi6
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi8
-rw-r--r--arch/arm/boot/dts/at91sam9rl.dtsi8
-rw-r--r--arch/arm/boot/dts/bcm2711.dtsi70
-rw-r--r--arch/arm/boot/dts/bcm2835-common.dtsi6
-rw-r--r--arch/arm/boot/dts/bcm283x.dtsi19
-rw-r--r--arch/arm/boot/dts/bcm958625hr.dts15
-rw-r--r--arch/arm/boot/dts/dm3725.dtsi10
-rw-r--r--arch/arm/boot/dts/dra7-l4.dtsi55
-rw-r--r--arch/arm/boot/dts/dra7.dtsi258
-rw-r--r--arch/arm/boot/dts/dra74x.dtsi71
-rw-r--r--arch/arm/boot/dts/dra76-evm.dts66
-rw-r--r--arch/arm/boot/dts/e60k02.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts6
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos4412-midas.dtsi29
-rw-r--r--arch/arm/boot/dts/exynos4412-n710x.dts5
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4412-tiny4412.dts25
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi12
-rw-r--r--arch/arm/boot/dts/exynos5260-xyref5260.dts4
-rw-r--r--arch/arm/boot/dts/exynos5260.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5410-odroidxu.dts2
-rw-r--r--arch/arm/boot/dts/exynos5410-smdk5410.dts4
-rw-r--r--arch/arm/boot/dts/exynos5410.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts2
-rw-r--r--arch/arm/boot/dts/exynos5420-cpus.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5420-smdk5420.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi339
-rw-r--r--arch/arm/boot/dts/exynos5422-cpus.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi285
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidhc1.dts64
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi78
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts58
-rw-r--r--arch/arm/boot/dts/exynos54xx.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts13
-rw-r--r--arch/arm/boot/dts/exynos5800.dtsi58
-rw-r--r--arch/arm/boot/dts/ibm-power9-dual.dtsi4
-rw-r--r--arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts2
-rw-r--r--arch/arm/boot/dts/imx25-pdk.dts2
-rw-r--r--arch/arm/boot/dts/imx25.dtsi3
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts64
-rw-r--r--arch/arm/boot/dts/imx6dl-gw5907.dts14
-rw-r--r--arch/arm/boot/dts/imx6dl-gw5910.dts14
-rw-r--r--arch/arm/boot/dts/imx6dl-gw5912.dts13
-rw-r--r--arch/arm/boot/dts/imx6dl-gw5913.dts14
-rw-r--r--arch/arm/boot/dts/imx6q-gw5907.dts14
-rw-r--r--arch/arm/boot/dts/imx6q-gw5910.dts14
-rw-r--r--arch/arm/boot/dts/imx6q-gw5912.dts13
-rw-r--r--arch/arm/boot/dts/imx6q-gw5913.dts14
-rw-r--r--arch/arm/boot/dts/imx6q-logicpd.dts10
-rw-r--r--arch/arm/boot/dts/imx6qdl-apalis.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw5907.dtsi399
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw5910.dtsi491
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw5912.dtsi461
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw5913.dtsi348
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore.dtsi15
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi9
-rw-r--r--arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi84
-rw-r--r--arch/arm/boot/dts/imx6sl-tolino-shine3.dts322
-rw-r--r--arch/arm/boot/dts/imx6sll.dtsi9
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb-reva.dts1
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri.dtsi188
-rw-r--r--arch/arm/boot/dts/imx7d-pico.dtsi90
-rw-r--r--arch/arm/boot/dts/imx7d-sdb-reva.dts3
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi2
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi16
-rw-r--r--arch/arm/boot/dts/imx7ulp-com.dts79
-rw-r--r--arch/arm/boot/dts/iwg20d-q7-common.dtsi88
-rw-r--r--arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi1
-rw-r--r--arch/arm/boot/dts/ls1021a-tsn.dts4
-rw-r--r--arch/arm/boot/dts/ls1021a.dtsi19
-rw-r--r--arch/arm/boot/dts/meson.dtsi7
-rw-r--r--arch/arm/boot/dts/meson6.dtsi7
-rw-r--r--arch/arm/boot/dts/meson8.dtsi28
-rw-r--r--arch/arm/boot/dts/meson8b-ec100.dts2
-rw-r--r--arch/arm/boot/dts/meson8b-mxq.dts2
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts2
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi30
-rw-r--r--arch/arm/boot/dts/mmp3-dell-ariel.dts22
-rw-r--r--arch/arm/boot/dts/mmp3.dtsi44
-rw-r--r--arch/arm/boot/dts/omap2.dtsi43
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3-echo.dts461
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts5
-rw-r--r--arch/arm/boot/dts/omap3.dtsi46
-rw-r--r--arch/arm/boot/dts/omap36xx.dtsi4
-rw-r--r--arch/arm/boot/dts/omap4-l4-abe.dtsi7
-rw-r--r--arch/arm/boot/dts/omap4-l4.dtsi30
-rw-r--r--arch/arm/boot/dts/omap4.dtsi44
-rw-r--r--arch/arm/boot/dts/omap5-l4-abe.dtsi6
-rw-r--r--arch/arm/boot/dts/omap5-l4.dtsi24
-rw-r--r--arch/arm/boot/dts/omap5.dtsi40
-rw-r--r--arch/arm/boot/dts/qcom-apq8084.dtsi44
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi7
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts45
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi222
-rw-r--r--arch/arm/boot/dts/r7s72100.dtsi18
-rw-r--r--arch/arm/boot/dts/r8a73a4.dtsi42
-rw-r--r--arch/arm/boot/dts/r8a7740-armadillo800eva.dts3
-rw-r--r--arch/arm/boot/dts/r8a7740.dtsi102
-rw-r--r--arch/arm/boot/dts/r8a7743.dtsi162
-rw-r--r--arch/arm/boot/dts/r8a7744.dtsi162
-rw-r--r--arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts3
-rw-r--r--arch/arm/boot/dts/r8a7745.dtsi122
-rw-r--r--arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts3
-rw-r--r--arch/arm/boot/dts/r8a77470.dtsi86
-rw-r--r--arch/arm/boot/dts/r8a7778.dtsi11
-rw-r--r--arch/arm/boot/dts/r8a7779-marzen.dts3
-rw-r--r--arch/arm/boot/dts/r8a7779.dtsi16
-rw-r--r--arch/arm/boot/dts/r8a7790-lager.dts6
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi167
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts9
-rw-r--r--arch/arm/boot/dts/r8a7791-porter.dts6
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi159
-rw-r--r--arch/arm/boot/dts/r8a7792.dtsi67
-rw-r--r--arch/arm/boot/dts/r8a7793-gose.dts9
-rw-r--r--arch/arm/boot/dts/r8a7793.dtsi123
-rw-r--r--arch/arm/boot/dts/r8a7794-alt.dts6
-rw-r--r--arch/arm/boot/dts/r8a7794-silk.dts3
-rw-r--r--arch/arm/boot/dts/r8a7794.dtsi111
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi6
-rw-r--r--arch/arm/boot/dts/rk3188-bqedison2qc.dts3
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi6
-rw-r--r--arch/arm/boot/dts/rk3288-evb.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3288-tinker.dtsi13
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-brain.dts9
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi22
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi21
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-edp.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-fievel.dts14
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-jaq.dts22
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-jerry.dts22
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-mickey.dts9
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-minnie.dts23
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-pinky.dts22
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-speedy.dts21
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-tiger.dts2
-rw-r--r--arch/arm/boot/dts/rk3288-veyron.dtsi59
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi8
-rw-r--r--arch/arm/boot/dts/rk3xxx.dtsi6
-rw-r--r--arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi81
-rw-r--r--arch/arm/boot/dts/rv1108.dtsi6
-rw-r--r--arch/arm/boot/dts/s3c2416-smdk2416.dts2
-rw-r--r--arch/arm/boot/dts/s3c6410-smdk6410.dts4
-rw-r--r--arch/arm/boot/dts/sam9x60.dtsi691
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi10
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi28
-rw-r--r--arch/arm/boot/dts/sama5d3_can.dtsi4
-rw-r--r--arch/arm/boot/dts/sama5d3_tcb1.dtsi1
-rw-r--r--arch/arm/boot/dts/sama5d3_uart.dtsi4
-rw-r--r--arch/arm/boot/dts/sh73a0.dtsi139
-rw-r--r--arch/arm/boot/dts/ste-ab8500.dtsi102
-rw-r--r--arch/arm/boot/dts/ste-ab8505.dtsi275
-rw-r--r--arch/arm/boot/dts/ste-db8500.dtsi15
-rw-r--r--arch/arm/boot/dts/ste-db8520.dtsi15
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi632
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi75
-rw-r--r--arch/arm/boot/dts/ste-href-ab8505.dtsi234
-rw-r--r--arch/arm/boot/dts/ste-href-family-pinctrl.dtsi532
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi79
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi58
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618.dtsi71
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi67
-rw-r--r--arch/arm/boot/dts/ste-href520-tvk.dts22
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60-stuib.dts10
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60-tvk.dts10
-rw-r--r--arch/arm/boot/dts/ste-hrefprev60.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus-stuib.dts10
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus-tvk.dts10
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus.dtsi1
-rw-r--r--arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi5
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts70
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-golden.dts455
-rw-r--r--arch/arm/boot/dts/stm32429i-eval.dts8
-rw-r--r--arch/arm/boot/dts/stm32f4-pinctrl.dtsi28
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32f469-disco.dts8
-rw-r--r--arch/arm/boot/dts/stm32f7-pinctrl.dtsi22
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi5
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi6
-rw-r--r--arch/arm/boot/dts/stm32mp15-pinctrl.dtsi1092
-rw-r--r--arch/arm/boot/dts/stm32mp151.dtsi (renamed from arch/arm/boot/dts/stm32mp157c.dtsi)301
-rw-r--r--arch/arm/boot/dts/stm32mp153.dtsi45
-rw-r--r--arch/arm/boot/dts/stm32mp157-pinctrl.dtsi953
-rw-r--r--arch/arm/boot/dts/stm32mp157.dtsi31
-rw-r--r--arch/arm/boot/dts/stm32mp157a-avenger96.dts5
-rw-r--r--arch/arm/boot/dts/stm32mp157a-dk1.dts498
-rw-r--r--arch/arm/boot/dts/stm32mp157c-dk2.dts15
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts38
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ev1.dts22
-rw-r--r--arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi90
-rw-r--r--arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi62
-rw-r--r--arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi78
-rw-r--r--arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi62
-rw-r--r--arch/arm/boot/dts/stm32mp15xc.dtsi18
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dkx.dtsi625
-rw-r--r--arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi85
-rw-r--r--arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi57
-rw-r--r--arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi73
-rw-r--r--arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi57
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi35
-rw-r--r--arch/arm/boot/dts/sun5i.dtsi3
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi25
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi36
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi13
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi42
-rw-r--r--arch/arm/boot/dts/sun8i-h3-beelink-x2.dts1
-rw-r--r--arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts72
-rw-r--r--arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi11
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-h3.dtsi35
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi172
-rw-r--r--arch/arm/boot/dts/sun8i-v3s.dtsi2
-rw-r--r--arch/arm/boot/dts/sun9i-a80.dtsi42
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi170
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi13
-rw-r--r--arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi180
-rw-r--r--arch/arm/boot/dts/tegra124-apalis-emc.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi4
-rw-r--r--arch/arm/boot/dts/tegra20-paz00.dts46
-rw-r--r--arch/arm/boot/dts/uniphier-ld4.dtsi3
-rw-r--r--arch/arm/boot/dts/uniphier-pinctrl.dtsi10
-rw-r--r--arch/arm/boot/dts/uniphier-pro4.dtsi3
-rw-r--r--arch/arm/boot/dts/uniphier-pro5.dtsi3
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2.dtsi3
-rw-r--r--arch/arm/boot/dts/uniphier-sld8.dtsi3
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-b.dts10
-rw-r--r--arch/arm/boot/dts/vf610-zii-scu4-aib.dts29
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi135
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--arch/arm/mach-omap2/common.h3
-rw-r--r--arch/arm/mach-omap2/dma.c119
-rw-r--r--arch/arm/mach-omap2/omap_device.c170
-rw-r--r--arch/arm/mach-omap2/omap_device.h4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c18
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.h3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c34
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c34
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c18
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h33
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c124
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c335
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_data.c91
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c61
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_43xx_data.c448
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c1087
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c662
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c873
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_common_data.h1
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_reset.c24
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c1
-rw-r--r--arch/arm/mach-omap2/pm24xx.c22
-rw-r--r--arch/arm/mach-omap2/pm34xx.c5
-rw-r--r--arch/arm/plat-omap/dma.c471
-rw-r--r--arch/arm64/boot/dts/allwinner/Makefile3
-rw-r--r--arch/arm64/boot/dts/allwinner/axp803.dtsi43
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts23
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts60
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi75
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts60
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts8
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts10
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts77
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts62
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts7
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts43
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts60
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts26
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts48
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi65
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts26
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi185
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts88
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi68
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts6
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts11
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts61
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts45
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts43
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts43
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts48
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts9
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts43
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi85
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts14
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts10
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts6
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts8
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi8
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts21
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts23
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts15
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi59
-rw-r--r--arch/arm64/boot/dts/altera/Makefile3
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts223
-rw-r--r--arch/arm64/boot/dts/amlogic/Makefile3
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-a1.dtsi25
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg.dtsi6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi23
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12.dtsi6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi375
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts78
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl.dtsi9
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts62
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1.dtsi12
-rw-r--r--arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts9
-rw-r--r--arch/arm64/boot/dts/bitmain/bm1880.dtsi28
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi2
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2.dts2
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts2
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7-espresso.dts4
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/Makefile4
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts15
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts17
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi63
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts14
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts16
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts24
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts24
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi13
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi10
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi127
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts15
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi57
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts15
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts28
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi21
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-evk.dts25
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h16
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm.dtsi55
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts20
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi70
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn.dtsi61
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-evk.dts27
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts6
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts7
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts376
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-thor96.dts581
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq.dtsi107
-rw-r--r--arch/arm64/boot/dts/freescale/imx8qxp.dtsi12
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts1
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi2
-rw-r--r--arch/arm64/boot/dts/intel/Makefile3
-rw-r--r--arch/arm64/boot/dts/intel/socfpga_agilex.dtsi76
-rw-r--r--arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts135
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts8
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8173.dtsi18
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183.dtsi11
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra132.dtsi4
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi1
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186.dtsi34
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi4
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts2
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194.dtsi56
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts73
-rw-r--r--arch/arm64/boot/dts/qcom/Makefile2
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi19
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi11
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi109
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi92
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi1408
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts385
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi5
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi2996
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi49
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi41
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-pins.dtsi25
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi262
-rw-r--r--arch/arm64/boot/dts/qcom/pm6150.dtsi72
-rw-r--r--arch/arm64/boot/dts/qcom/pm6150l.dtsi31
-rw-r--r--arch/arm64/boot/dts/qcom/pm8004.dtsi10
-rw-r--r--arch/arm64/boot/dts/qcom/pm8916.dtsi6
-rw-r--r--arch/arm64/boot/dts/qcom/pm8994.dtsi4
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404.dtsi160
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-idp.dts430
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180.dtsi2187
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi15
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-db845c.dts18
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-mtp.dts7
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi32
-rw-r--r--arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts7
-rw-r--r--arch/arm64/boot/dts/qcom/sm8150-mtp.dts35
-rw-r--r--arch/arm64/boot/dts/qcom/sm8150.dtsi391
-rw-r--r--arch/arm64/boot/dts/renesas/Makefile27
-rw-r--r--arch/arm64/boot/dts/renesas/hihope-common.dtsi3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1.dtsi206
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774b1.dtsi206
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts116
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0.dtsi164
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts (renamed from arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts (renamed from arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts (renamed from arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77950.dtsi (renamed from arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts (renamed from arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts (renamed from arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts)8
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts (renamed from arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts (renamed from arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77951.dtsi (renamed from arch/arm64/boot/dts/renesas/r8a7795.dtsi)216
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts (renamed from arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts (renamed from arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts (renamed from arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts (renamed from arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts)4
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77960.dtsi (renamed from arch/arm64/boot/dts/renesas/r8a7796.dtsi)206
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77961.dtsi390
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts (renamed from arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts)2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts (renamed from arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts)0
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965.dtsi206
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77970.dtsi52
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77980.dtsi96
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts7
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990.dtsi164
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995.dtsi74
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-common.dtsi6
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb.dtsi3
-rw-r--r--arch/arm64/boot/dts/rockchip/Makefile2
-rw-r--r--arch/arm64/boot/dts/rockchip/px30-evb.dts43
-rw-r--r--arch/arm64/boot/dts/rockchip/px30.dtsi199
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3308.dtsi12
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi23
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368.dtsi6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-firefly.dts6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts28
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi27
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts25
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi97
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts26
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi11
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts30
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts759
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi797
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi13
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts17
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi333
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi3
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi3
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi3
-rw-r--r--arch/arm64/boot/dts/sprd/Makefile3
-rw-r--r--arch/arm64/boot/dts/sprd/sc9863a.dtsi523
-rw-r--r--arch/arm64/boot/dts/sprd/sharkl3.dtsi78
-rw-r--r--arch/arm64/boot/dts/sprd/sp9863a-1h10.dts39
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-main.dtsi144
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi92
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65.dtsi13
-rw-r--r--arch/arm64/boot/dts/ti/k3-am654-base-board.dts80
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts150
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-main.dtsi411
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi149
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi45
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e.dtsi2
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi222
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi213
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts4
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts4
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts4
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts7
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts11
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts6
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts4
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts6
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts17
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts197
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts4
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts11
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts154
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts124
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp.dtsi74
-rw-r--r--drivers/clk/mmp/clk-of-mmp2.c6
-rw-r--r--drivers/dma/ti/omap-dma.c288
-rw-r--r--include/dt-bindings/clock/marvell,mmp2.h2
-rw-r--r--include/dt-bindings/memory/tegra186-mc.h139
-rw-r--r--include/dt-bindings/memory/tegra194-mc.h410
-rw-r--r--include/linux/omap-dma.h18
-rw-r--r--include/sound/aess.h53
585 files changed, 32100 insertions, 15650 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index c6a443352ef8..f74aba48cec1 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -59,6 +59,7 @@ properties:
- friendlyarm,nanopi-k2
- hardkernel,odroid-c2
- nexbox,a95x
+ - videostrong,kii-pro
- wetek,hub
- wetek,play2
- const: amlogic,meson-gxbb
@@ -104,6 +105,7 @@ properties:
- enum:
- amlogic,p230
- amlogic,p231
+ - libretech,aml-s905d-pc
- phicomm,n1
- const: amlogic,s905d
- const: amlogic,meson-gxl
@@ -115,6 +117,7 @@ properties:
- amlogic,q201
- khadas,vim2
- kingnovel,r-box-pro
+ - libretech,aml-s912-pc
- nexbox,a1
- tronsmart,vega-s96
- const: amlogic,s912
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index 6dd8be401673..0357314076bc 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -37,6 +37,16 @@ properties:
- items:
- enum:
+ - overkiz,kizboxmini-base # Overkiz kizbox Mini Base Board
+ - overkiz,kizboxmini-mb # Overkiz kizbox Mini Mother Board
+ - overkiz,kizboxmini-rd # Overkiz kizbox Mini RailDIN
+ - overkiz,smartkiz # Overkiz SmartKiz Board
+ - const: atmel,at91sam9g25
+ - const: atmel,at91sam9x5
+ - const: atmel,at91sam9
+
+ - items:
+ - enum:
- atmel,at91sam9g15
- atmel,at91sam9g25
- atmel,at91sam9g35
@@ -52,11 +62,32 @@ properties:
- const: atmel,sama5d2
- const: atmel,sama5
+ - description: Microchip SAMA5D27 WLSOM1
+ items:
+ - const: microchip,sama5d27-wlsom1
+ - const: atmel,sama5d27
+ - const: atmel,sama5d2
+ - const: atmel,sama5
+
+ - description: Microchip SAMA5D27 WLSOM1 Evaluation Kit
+ items:
+ - const: microchip,sama5d27-wlsom1-ek
+ - const: microchip,sama5d27-wlsom1
+ - const: atmel,sama5d27
+ - const: atmel,sama5d2
+ - const: atmel,sama5
+
- items:
- const: atmel,sama5d27
- const: atmel,sama5d2
- const: atmel,sama5
+ - description: SAM9X60-EK board
+ items:
+ - const: microchip,sam9x60ek
+ - const: microchip,sam9x60
+ - const: atmel,at91sam9
+
- description: Nattis v2 board with Natte v2 power board
items:
- const: axentia,nattis-2
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index e003a553b986..62cd4e89817c 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -45,6 +45,7 @@ RAMC SDRAM/DDR Controller required properties:
"atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
"atmel,sama5d3-ddramc",
+ "microchip,sam9x60-ddramc"
- reg: Should contain registers location and length
Examples:
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index b0a7454a70b8..a8e0b4a813ed 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -128,6 +128,27 @@ properties:
- variscite,dt6customboard
- const: fsl,imx6q
+ - description: i.MX6Q Gateworks Ventana Boards
+ items:
+ - enum:
+ - gw,imx6q-gw51xx
+ - gw,imx6q-gw52xx
+ - gw,imx6q-gw53xx
+ - gw,imx6q-gw5400-a
+ - gw,imx6q-gw54xx
+ - gw,imx6q-gw551x
+ - gw,imx6q-gw552x
+ - gw,imx6q-gw553x
+ - gw,imx6q-gw560x
+ - gw,imx6q-gw5903
+ - gw,imx6q-gw5904
+ - gw,imx6q-gw5907
+ - gw,imx6q-gw5910
+ - gw,imx6q-gw5912
+ - gw,imx6q-gw5913
+ - const: gw,ventana
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -154,10 +175,31 @@ properties:
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
+ - description: i.MX6DL Gateworks Ventana Boards
+ items:
+ - enum:
+ - gw,imx6dl-gw51xx
+ - gw,imx6dl-gw52xx
+ - gw,imx6dl-gw53xx
+ - gw,imx6dl-gw54xx
+ - gw,imx6dl-gw551x
+ - gw,imx6dl-gw552x
+ - gw,imx6dl-gw553x
+ - gw,imx6dl-gw560x
+ - gw,imx6dl-gw5903
+ - gw,imx6dl-gw5904
+ - gw,imx6dl-gw5907
+ - gw,imx6dl-gw5910
+ - gw,imx6dl-gw5912
+ - gw,imx6dl-gw5913
+ - const: gw,ventana
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
- fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
+ - kobo,tolino-shine3
- const: fsl,imx6sl
- description: i.MX6SLL based Boards
@@ -172,6 +214,7 @@ properties:
- enum:
- fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board
- fsl,imx6sx-sdb # i.MX6 SoloX SDB Board
+ - fsl,imx6sx-sdb-reva # i.MX6 SoloX SDB Rev-A Board
- const: fsl,imx6sx
- description: i.MX6UL based Boards
@@ -239,6 +282,7 @@ properties:
items:
- enum:
- fsl,imx7d-sdb # i.MX7 SabreSD Board
+ - fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board
- novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
- toradex,colibri-imx7d # Colibri iMX7 Dual Module
- toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
@@ -263,6 +307,7 @@ properties:
- description: i.MX7ULP based Boards
items:
- enum:
+ - ea,imx7ulp-com # i.MX7ULP Embedded Artists COM Board
- fsl,imx7ulp-evk # i.MX7ULP Evaluation Kit
- const: fsl,imx7ulp
@@ -283,7 +328,9 @@ properties:
items:
- enum:
- boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+ - einfochips,imx8mq-thor96 # i.MX8MQ Thor96 Board
- fsl,imx8mq-evk # i.MX8MQ EVK Board
+ - google,imx8mq-phanbell # Google Coral Edge TPU
- purism,librem5-devkit # Purism Librem5 devkit
- solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
- technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk
@@ -385,6 +432,13 @@ properties:
- fsl,ls2088a-rdb
- const: fsl,ls2088a
+ - description: LX2160A based Boards
+ items:
+ - enum:
+ - fsl,lx2160a-qds
+ - fsl,lx2160a-rdb
+ - const: fsl,lx2160a
+
- description: S32V234 based Boards
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index b5bef5abc281..5976c0b16b65 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -24,28 +24,30 @@ description: |
The 'SoC' element must be one of the following strings:
- apq8016
- apq8074
- apq8084
- apq8096
- msm8916
- msm8974
- msm8992
- msm8994
- msm8996
- mdm9615
- ipq8074
- sdm845
+ apq8016
+ apq8074
+ apq8084
+ apq8096
+ ipq8074
+ mdm9615
+ msm8916
+ msm8974
+ msm8992
+ msm8994
+ msm8996
+ sc7180
+ sdm845
The 'board' element must be one of the following strings:
- cdp
- liquid
- dragonboard
- mtp
- sbc
- hk01
- qrd
+ cdp
+ dragonboard
+ hk01
+ idp
+ liquid
+ mtp
+ qrd
+ sbc
The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
where the minor number may be omitted when it's zero, i.e. v1.0 is the same
@@ -144,4 +146,8 @@ properties:
- qcom,ipq8074-hk01
- const: qcom,ipq8074
+ - items:
+ - enum:
+ - qcom,sc7180-idp
+ - const: qcom,sc7180
...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index d9847b306b83..874b0eaa2a75 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -409,6 +409,9 @@ properties:
- description: Pine64 RockPro64
items:
+ - enum:
+ - pine64,rockpro64-v2.1
+ - pine64,rockpro64-v2.0
- const: pine64,rockpro64
- const: rockchip,rk3399
@@ -422,6 +425,12 @@ properties:
- const: radxa,rockpi4
- const: rockchip,rk3399
+ - description: Radxa ROCK Pi N10
+ items:
+ - const: radxa,rockpi-n10
+ - const: vamrs,rk3399pro-vmarc-som
+ - const: rockchip,rk3399pro
+
- description: Radxa Rock2 Square
items:
- const: radxa,rock2-square
diff --git a/Documentation/devicetree/bindings/arm/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
index c35fb845ccaa..0258a96bfbde 100644
--- a/Documentation/devicetree/bindings/arm/sprd.yaml
+++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -2,7 +2,7 @@
# Copyright 2019 Unisoc Inc.
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/sprd.yaml#
+$id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Unisoc platforms device tree bindings
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index cffe8bb0bad1..327ce6730823 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -342,6 +342,16 @@ properties:
- const: libretech,all-h3-cc-h5
- const: allwinner,sun50i-h5
+ - description: Libre Computer Board ALL-H3-IT H5
+ items:
+ - const: libretech,all-h3-it-h5
+ - const: allwinner,sun50i-h5
+
+ - description: Libre Computer Board ALL-H5-CC H5
+ items:
+ - const: libretech,all-h5-cc-h5
+ - const: allwinner,sun50i-h5
+
- description: Lichee Pi One
items:
- const: licheepi,licheepi-one
@@ -470,6 +480,12 @@ properties:
- const: emlid,neutis-n5
- const: allwinner,sun50i-h5
+ - description: Emlid Neutis N5H3 Developper Board
+ items:
+ - const: emlid,neutis-n5h3-devboard
+ - const: emlid,neutis-n5h3
+ - const: allwinner,sun8i-h3
+
- description: NextThing Co. CHIP
items:
- const: nextthing,chip
@@ -599,11 +615,16 @@ properties:
- const: pine64,pine64-plus
- const: allwinner,sun50i-a64
- - description: Pine64 PineH64
+ - description: Pine64 PineH64 model A
items:
- const: pine64,pine-h64
- const: allwinner,sun50i-h6
+ - description: Pine64 PineH64 model B
+ items:
+ - const: pine64,pine-h64-model-b
+ - const: allwinner,sun50i-h6
+
- description: Pine64 LTS
items:
- const: pine64,pine64-lts
diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml
new file mode 100644
index 000000000000..accaee906050
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ux500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ux500 platforms device tree bindings
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+
+ - description: ST-Ericsson HREF (pre-v60)
+ items:
+ - const: st-ericsson,mop500
+ - const: st-ericsson,u8500
+
+ - description: ST-Ericsson HREF (v60+)
+ items:
+ - const: st-ericsson,hrefv60+
+ - const: st-ericsson,u8500
+
+ - description: Calao Systems Snowball
+ items:
+ - const: calaosystems,snowball-a9500
+ - const: st-ericsson,u9500
+
+ - description: Samsung Galaxy S III mini (GT-I8190)
+ items:
+ - const: samsung,golden
+ - const: st-ericsson,u8500
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
new file mode 100644
index 000000000000..3f995d2b30eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a83t-de2-clk
+ - const: allwinner,sun8i-h3-de2-clk
+ - const: allwinner,sun8i-v3s-de2-clk
+ - const: allwinner,sun50i-a64-de2-clk
+ - const: allwinner,sun50i-h5-de2-clk
+ - const: allwinner,sun50i-h6-de2-clk
+ - items:
+ - const: allwinner,sun8i-r40-de2-clk
+ - const: allwinner,sun8i-h3-de2-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun8i-h3-ccu.h>
+ #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+ de2_clocks: clock@1000000 {
+ compatible = "allwinner,sun8i-h3-de2-clk";
+ reg = <0x01000000 0x100000>;
+ clocks = <&ccu CLK_BUS_DE>,
+ <&ccu CLK_DE>;
+ clock-names = "bus",
+ "mod";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
new file mode 100644
index 000000000000..a82c7c7e942b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun9i-a80-de-clks
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: RAM Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: mod
+ - const: dram
+ - const: bus
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun9i-a80-ccu.h>
+ #include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+ de_clocks: clock@3000000 {
+ compatible = "allwinner,sun9i-a80-de-clks";
+ reg = <0x03000000 0x30>;
+ clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+ clock-names = "mod", "dram", "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
new file mode 100644
index 000000000000..fa0ee03a527f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun9i-a80-usb-clocks
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: High Frequency Oscillator
+
+ clock-names:
+ items:
+ - const: bus
+ - const: hosc
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+ usb_clocks: clock@a08000 {
+ compatible = "allwinner,sun9i-a80-usb-clks";
+ reg = <0x00a08000 0x8>;
+ clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+ clock-names = "bus", "hosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
deleted file mode 100644
index 41a52c2acffd..000000000000
--- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Allwinner Display Engine 2.0/3.0 Clock Control Binding
-------------------------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
- - "allwinner,sun8i-a83t-de2-clk"
- - "allwinner,sun8i-h3-de2-clk"
- - "allwinner,sun8i-v3s-de2-clk"
- - "allwinner,sun50i-a64-de2-clk"
- - "allwinner,sun50i-h5-de2-clk"
- - "allwinner,sun50i-h6-de3-clk"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the display engine subsystem.
- Three are needed:
- - "mod": the display engine module clock (on A83T it's the DE PLL)
- - "bus": the bus clock for the whole display engine subsystem
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset control for the display engine subsystem.
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-de2_clocks: clock@1000000 {
- compatible = "allwinner,sun8i-h3-de2-clk";
- reg = <0x01000000 0x100000>;
- clocks = <&ccu CLK_BUS_DE>,
- <&ccu CLK_DE>;
- clock-names = "bus",
- "mod";
- resets = <&ccu RST_BUS_DE>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt
deleted file mode 100644
index fb18f327b97a..000000000000
--- a/Documentation/devicetree/bindings/clock/sun9i-de.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Allwinner A80 Display Engine Clock Control Binding
---------------------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
- - "allwinner,sun9i-a80-de-clks"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the display engine subsystem.
- Three are needed:
- - "mod": the display engine module clock
- - "dram": the DRAM bus clock for the system
- - "bus": the bus clock for the whole display engine subsystem
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset control for the display engine subsystem.
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-de_clocks: clock@3000000 {
- compatible = "allwinner,sun9i-a80-de-clks";
- reg = <0x03000000 0x30>;
- clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
- clock-names = "mod", "dram", "bus";
- resets = <&ccu RST_BUS_DE>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/sun9i-usb.txt b/Documentation/devicetree/bindings/clock/sun9i-usb.txt
deleted file mode 100644
index 3564bd4f2a20..000000000000
--- a/Documentation/devicetree/bindings/clock/sun9i-usb.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Allwinner A80 USB Clock Control Binding
----------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
- - "allwinner,sun9i-a80-usb-clocks"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
- - "bus": the bus clock for the whole USB subsystem
- - "hosc": the high frequency oscillator (usually at 24MHz)
-- clock-names: Must contain the clock names described just above
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-usb_clocks: clock@a08000 {
- compatible = "allwinner,sun9i-a80-usb-clks";
- reg = <0x00a08000 0x8>;
- clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
- clock-names = "bus", "hosc";
- #clock-cells = <1>;
- #reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
index 472e1ea6c591..c985871c46b3 100644
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
Should be "fsl,imx28-lcdif" for i.MX28.
Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+ Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
- reg: Address and length of the register set for LCDIF
- interrupts: Should contain LCDIF interrupt
- clocks: A list of phandle + clock-specifier pairs, one for each
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
index 0eb2b3207e08..4dc398e1a371 100644
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -2,9 +2,7 @@
* XDMA Controller
Required properties:
-- compatible: Should be "atmel,<chip>-dma".
- <chip> compatible description:
- - sama5d4: first SoC adding the XDMAC
+- compatible: Should be "atmel,sama5d4-dma" or "microchip,sam9x60-dma".
- reg: Should contain DMA registers location and length.
- interrupts: Should contain DMA interrupt.
- #dma-cells: Must be <1>, used to represent the number of integer cells in
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 0c426e371e71..4ea6a8789699 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -18,6 +18,7 @@ properties:
- enum:
- amlogic,meson-g12a-mali
- realtek,rtd1619-mali
+ - rockchip,px30-mali
- const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
reg:
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 4a3c1d496e1a..07c59f301b31 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -1,7 +1,7 @@
* AT91 SAMA5D2 Analog to Digital Converter (ADC)
Required properties:
- - compatible: Should be "atmel,sama5d2-adc".
+ - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc".
- reg: Should contain ADC registers location and length.
- interrupts: Should contain the IRQ line for the ADC.
- clocks: phandle to device clock.
diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
index 332513a151cc..8924c7545b63 100644
--- a/Documentation/devicetree/bindings/media/atmel-isi.txt
+++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
@@ -2,7 +2,7 @@ Atmel Image Sensor Interface (ISI)
----------------------------------
Required properties for ISI:
-- compatible: must be "atmel,at91sam9g45-isi".
+- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
- reg: physical base address and length of the registers set for the device.
- interrupts: should contain IRQ line for the ISI.
- clocks: list of clock specifiers, corresponding to entries in the clock-names
diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt
index 2477e7f87381..f8090e06530d 100644
--- a/Documentation/devicetree/bindings/media/fsl-pxp.txt
+++ b/Documentation/devicetree/bindings/media/fsl-pxp.txt
@@ -8,7 +8,7 @@ i.MX SoCs from i.MX23 to i.MX7.
Required properties:
- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
- imx6dl, imx6sl, imx6ul, imx6sx, imx6ull, or imx7d.
+ imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d.
- reg: the register base and size for the device registers
- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
- clock-names: should be "axi"
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index d11380794ff4..a64ee038d235 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -123,6 +123,7 @@ properties:
- rc-su3000
- rc-tango
- rc-tanix-tx3mini
+ - rc-tanix-tx5max
- rc-tbs-nec
- rc-technisat-ts35
- rc-technisat-usb2
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt
deleted file mode 100644
index ba0bc3f12419..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt
+++ /dev/null
@@ -1,374 +0,0 @@
-NVIDIA Tegra124 SoC EMC (external memory controller)
-====================================================
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-emc".
-- reg : physical base address and length of the controller's registers.
-- nvidia,memory-controller : phandle of the MC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type
-(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
-being its RAM_CODE.
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
-used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
-their unit address.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate in Hz.
-- The following properties contain EMC timing characterization values
-(specified in the board documentation) :
- - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
- - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
- - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
- - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
- - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
- - nvidia,emc-cfg : EMC_CFG
- - nvidia,emc-cfg-2 : EMC_CFG_2
- - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
- - nvidia,emc-mode-1 : Mode Register 1
- - nvidia,emc-mode-2 : Mode Register 2
- - nvidia,emc-mode-4 : Mode Register 4
- - nvidia,emc-mode-reset : Mode Register 0
- - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
- - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
- - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
- - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
- - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
-- nvidia,emc-configuration : EMC timing characterization data. These are the
-registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
-be specified, according to the board documentation:
-
- EMC_RC
- EMC_RFC
- EMC_RFC_SLR
- EMC_RAS
- EMC_RP
- EMC_R2W
- EMC_W2R
- EMC_R2P
- EMC_W2P
- EMC_RD_RCD
- EMC_WR_RCD
- EMC_RRD
- EMC_REXT
- EMC_WEXT
- EMC_WDV
- EMC_WDV_MASK
- EMC_QUSE
- EMC_QUSE_WIDTH
- EMC_IBDLY
- EMC_EINPUT
- EMC_EINPUT_DURATION
- EMC_PUTERM_EXTRA
- EMC_PUTERM_WIDTH
- EMC_PUTERM_ADJ
- EMC_CDB_CNTL_1
- EMC_CDB_CNTL_2
- EMC_CDB_CNTL_3
- EMC_QRST
- EMC_QSAFE
- EMC_RDV
- EMC_RDV_MASK
- EMC_REFRESH
- EMC_BURST_REFRESH_NUM
- EMC_PRE_REFRESH_REQ_CNT
- EMC_PDEX2WR
- EMC_PDEX2RD
- EMC_PCHG2PDEN
- EMC_ACT2PDEN
- EMC_AR2PDEN
- EMC_RW2PDEN
- EMC_TXSR
- EMC_TXSRDLL
- EMC_TCKE
- EMC_TCKESR
- EMC_TPD
- EMC_TFAW
- EMC_TRPAB
- EMC_TCLKSTABLE
- EMC_TCLKSTOP
- EMC_TREFBW
- EMC_FBIO_CFG6
- EMC_ODT_WRITE
- EMC_ODT_READ
- EMC_FBIO_CFG5
- EMC_CFG_DIG_DLL
- EMC_CFG_DIG_DLL_PERIOD
- EMC_DLL_XFORM_DQS0
- EMC_DLL_XFORM_DQS1
- EMC_DLL_XFORM_DQS2
- EMC_DLL_XFORM_DQS3
- EMC_DLL_XFORM_DQS4
- EMC_DLL_XFORM_DQS5
- EMC_DLL_XFORM_DQS6
- EMC_DLL_XFORM_DQS7
- EMC_DLL_XFORM_DQS8
- EMC_DLL_XFORM_DQS9
- EMC_DLL_XFORM_DQS10
- EMC_DLL_XFORM_DQS11
- EMC_DLL_XFORM_DQS12
- EMC_DLL_XFORM_DQS13
- EMC_DLL_XFORM_DQS14
- EMC_DLL_XFORM_DQS15
- EMC_DLL_XFORM_QUSE0
- EMC_DLL_XFORM_QUSE1
- EMC_DLL_XFORM_QUSE2
- EMC_DLL_XFORM_QUSE3
- EMC_DLL_XFORM_QUSE4
- EMC_DLL_XFORM_QUSE5
- EMC_DLL_XFORM_QUSE6
- EMC_DLL_XFORM_QUSE7
- EMC_DLL_XFORM_ADDR0
- EMC_DLL_XFORM_ADDR1
- EMC_DLL_XFORM_ADDR2
- EMC_DLL_XFORM_ADDR3
- EMC_DLL_XFORM_ADDR4
- EMC_DLL_XFORM_ADDR5
- EMC_DLL_XFORM_QUSE8
- EMC_DLL_XFORM_QUSE9
- EMC_DLL_XFORM_QUSE10
- EMC_DLL_XFORM_QUSE11
- EMC_DLL_XFORM_QUSE12
- EMC_DLL_XFORM_QUSE13
- EMC_DLL_XFORM_QUSE14
- EMC_DLL_XFORM_QUSE15
- EMC_DLI_TRIM_TXDQS0
- EMC_DLI_TRIM_TXDQS1
- EMC_DLI_TRIM_TXDQS2
- EMC_DLI_TRIM_TXDQS3
- EMC_DLI_TRIM_TXDQS4
- EMC_DLI_TRIM_TXDQS5
- EMC_DLI_TRIM_TXDQS6
- EMC_DLI_TRIM_TXDQS7
- EMC_DLI_TRIM_TXDQS8
- EMC_DLI_TRIM_TXDQS9
- EMC_DLI_TRIM_TXDQS10
- EMC_DLI_TRIM_TXDQS11
- EMC_DLI_TRIM_TXDQS12
- EMC_DLI_TRIM_TXDQS13
- EMC_DLI_TRIM_TXDQS14
- EMC_DLI_TRIM_TXDQS15
- EMC_DLL_XFORM_DQ0
- EMC_DLL_XFORM_DQ1
- EMC_DLL_XFORM_DQ2
- EMC_DLL_XFORM_DQ3
- EMC_DLL_XFORM_DQ4
- EMC_DLL_XFORM_DQ5
- EMC_DLL_XFORM_DQ6
- EMC_DLL_XFORM_DQ7
- EMC_XM2CMDPADCTRL
- EMC_XM2CMDPADCTRL4
- EMC_XM2CMDPADCTRL5
- EMC_XM2DQPADCTRL2
- EMC_XM2DQPADCTRL3
- EMC_XM2CLKPADCTRL
- EMC_XM2CLKPADCTRL2
- EMC_XM2COMPPADCTRL
- EMC_XM2VTTGENPADCTRL
- EMC_XM2VTTGENPADCTRL2
- EMC_XM2VTTGENPADCTRL3
- EMC_XM2DQSPADCTRL3
- EMC_XM2DQSPADCTRL4
- EMC_XM2DQSPADCTRL5
- EMC_XM2DQSPADCTRL6
- EMC_DSR_VTTGEN_DRV
- EMC_TXDSRVTTGEN
- EMC_FBIO_SPARE
- EMC_ZCAL_WAIT_CNT
- EMC_MRS_WAIT_CNT2
- EMC_CTT
- EMC_CTT_DURATION
- EMC_CFG_PIPE
- EMC_DYN_SELF_REF_CONTROL
- EMC_QPOP
-
-Example SoC include file:
-
-/ {
- emc@7001b000 {
- compatible = "nvidia,tegra124-emc";
- reg = <0x0 0x7001b000 0x0 0x1000>;
-
- nvidia,memory-controller = <&mc>;
- };
-};
-
-Example board file:
-
-/ {
- emc@7001b000 {
- emc-timings-3 {
- nvidia,ram-code = <3>;
-
- timing-12750000 {
- clock-frequency = <12750000>;
-
- nvidia,emc-zcal-cnt-long = <0x00000042>;
- nvidia,emc-auto-cal-interval = <0x001fffff>;
- nvidia,emc-ctt-term-ctrl = <0x00000802>;
- nvidia,emc-cfg = <0x73240000>;
- nvidia,emc-cfg-2 = <0x000008c5>;
- nvidia,emc-sel-dpd-ctrl = <0x00040128>;
- nvidia,emc-bgbias-ctl0 = <0x00000008>;
- nvidia,emc-auto-cal-config = <0xa1430000>;
- nvidia,emc-auto-cal-config2 = <0x00000000>;
- nvidia,emc-auto-cal-config3 = <0x00000000>;
- nvidia,emc-mode-reset = <0x80001221>;
- nvidia,emc-mode-1 = <0x80100003>;
- nvidia,emc-mode-2 = <0x80200008>;
- nvidia,emc-mode-4 = <0x00000000>;
-
- nvidia,emc-configuration = <
- 0x00000000 /* EMC_RC */
- 0x00000003 /* EMC_RFC */
- 0x00000000 /* EMC_RFC_SLR */
- 0x00000000 /* EMC_RAS */
- 0x00000000 /* EMC_RP */
- 0x00000004 /* EMC_R2W */
- 0x0000000a /* EMC_W2R */
- 0x00000003 /* EMC_R2P */
- 0x0000000b /* EMC_W2P */
- 0x00000000 /* EMC_RD_RCD */
- 0x00000000 /* EMC_WR_RCD */
- 0x00000003 /* EMC_RRD */
- 0x00000003 /* EMC_REXT */
- 0x00000000 /* EMC_WEXT */
- 0x00000006 /* EMC_WDV */
- 0x00000006 /* EMC_WDV_MASK */
- 0x00000006 /* EMC_QUSE */
- 0x00000002 /* EMC_QUSE_WIDTH */
- 0x00000000 /* EMC_IBDLY */
- 0x00000005 /* EMC_EINPUT */
- 0x00000005 /* EMC_EINPUT_DURATION */
- 0x00010000 /* EMC_PUTERM_EXTRA */
- 0x00000003 /* EMC_PUTERM_WIDTH */
- 0x00000000 /* EMC_PUTERM_ADJ */
- 0x00000000 /* EMC_CDB_CNTL_1 */
- 0x00000000 /* EMC_CDB_CNTL_2 */
- 0x00000000 /* EMC_CDB_CNTL_3 */
- 0x00000004 /* EMC_QRST */
- 0x0000000c /* EMC_QSAFE */
- 0x0000000d /* EMC_RDV */
- 0x0000000f /* EMC_RDV_MASK */
- 0x00000060 /* EMC_REFRESH */
- 0x00000000 /* EMC_BURST_REFRESH_NUM */
- 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
- 0x00000002 /* EMC_PDEX2WR */
- 0x00000002 /* EMC_PDEX2RD */
- 0x00000001 /* EMC_PCHG2PDEN */
- 0x00000000 /* EMC_ACT2PDEN */
- 0x00000007 /* EMC_AR2PDEN */
- 0x0000000f /* EMC_RW2PDEN */
- 0x00000005 /* EMC_TXSR */
- 0x00000005 /* EMC_TXSRDLL */
- 0x00000004 /* EMC_TCKE */
- 0x00000005 /* EMC_TCKESR */
- 0x00000004 /* EMC_TPD */
- 0x00000000 /* EMC_TFAW */
- 0x00000000 /* EMC_TRPAB */
- 0x00000005 /* EMC_TCLKSTABLE */
- 0x00000005 /* EMC_TCLKSTOP */
- 0x00000064 /* EMC_TREFBW */
- 0x00000000 /* EMC_FBIO_CFG6 */
- 0x00000000 /* EMC_ODT_WRITE */
- 0x00000000 /* EMC_ODT_READ */
- 0x106aa298 /* EMC_FBIO_CFG5 */
- 0x002c00a0 /* EMC_CFG_DIG_DLL */
- 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
- 0x00064000 /* EMC_DLL_XFORM_DQS0 */
- 0x00064000 /* EMC_DLL_XFORM_DQS1 */
- 0x00064000 /* EMC_DLL_XFORM_DQS2 */
- 0x00064000 /* EMC_DLL_XFORM_DQS3 */
- 0x00064000 /* EMC_DLL_XFORM_DQS4 */
- 0x00064000 /* EMC_DLL_XFORM_DQS5 */
- 0x00064000 /* EMC_DLL_XFORM_DQS6 */
- 0x00064000 /* EMC_DLL_XFORM_DQS7 */
- 0x00064000 /* EMC_DLL_XFORM_DQS8 */
- 0x00064000 /* EMC_DLL_XFORM_DQS9 */
- 0x00064000 /* EMC_DLL_XFORM_DQS10 */
- 0x00064000 /* EMC_DLL_XFORM_DQS11 */
- 0x00064000 /* EMC_DLL_XFORM_DQS12 */
- 0x00064000 /* EMC_DLL_XFORM_DQS13 */
- 0x00064000 /* EMC_DLL_XFORM_DQS14 */
- 0x00064000 /* EMC_DLL_XFORM_DQS15 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE0 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE1 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE2 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE3 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR0 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR1 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR2 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR3 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR4 */
- 0x00000000 /* EMC_DLL_XFORM_ADDR5 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE8 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE9 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE10 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE11 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE12 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE13 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE14 */
- 0x00000000 /* EMC_DLL_XFORM_QUSE15 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
- 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ0 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ1 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ2 */
- 0x000fc000 /* EMC_DLL_XFORM_DQ3 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
- 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
- 0x10000280 /* EMC_XM2CMDPADCTRL */
- 0x00000000 /* EMC_XM2CMDPADCTRL4 */
- 0x00111111 /* EMC_XM2CMDPADCTRL5 */
- 0x00000000 /* EMC_XM2DQPADCTRL2 */
- 0x00000000 /* EMC_XM2DQPADCTRL3 */
- 0x77ffc081 /* EMC_XM2CLKPADCTRL */
- 0x00000e0e /* EMC_XM2CLKPADCTRL2 */
- 0x81f1f108 /* EMC_XM2COMPPADCTRL */
- 0x07070004 /* EMC_XM2VTTGENPADCTRL */
- 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
- 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
- 0x51451400 /* EMC_XM2DQSPADCTRL3 */
- 0x00514514 /* EMC_XM2DQSPADCTRL4 */
- 0x00514514 /* EMC_XM2DQSPADCTRL5 */
- 0x51451400 /* EMC_XM2DQSPADCTRL6 */
- 0x0000003f /* EMC_DSR_VTTGEN_DRV */
- 0x00000007 /* EMC_TXDSRVTTGEN */
- 0x00000000 /* EMC_FBIO_SPARE */
- 0x00000042 /* EMC_ZCAL_WAIT_CNT */
- 0x000e000e /* EMC_MRS_WAIT_CNT2 */
- 0x00000000 /* EMC_CTT */
- 0x00000003 /* EMC_CTT_DURATION */
- 0x0000f2f3 /* EMC_CFG_PIPE */
- 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
- 0x0000000a /* EMC_QPOP */
- >;
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
new file mode 100644
index 000000000000..dd1843489ad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@@ -0,0 +1,528 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra124-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 SoC External Memory Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+ The EMC interfaces with the off-chip SDRAM to service the request stream
+ sent from the memory controller.
+
+properties:
+ compatible:
+ const: nvidia,tegra124-emc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: external memory clock
+
+ clock-names:
+ items:
+ - const: emc
+
+ nvidia,memory-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle of the memory controller node
+
+patternProperties:
+ "^emc-timings-[0-9]+$":
+ type: object
+ properties:
+ nvidia,ram-code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+ this timing set is used for
+
+ patternProperties:
+ "^timing-[0-9]+$":
+ type: object
+ properties:
+ clock-frequency:
+ description:
+ external memory clock rate in Hz
+ minimum: 1000000
+ maximum: 1000000000
+
+ nvidia,emc-auto-cal-config:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_AUTO_CAL_CONFIG register for this set of
+ timings
+
+ nvidia,emc-auto-cal-config2:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_AUTO_CAL_CONFIG2 register for this set of
+ timings
+
+ nvidia,emc-auto-cal-config3:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_AUTO_CAL_CONFIG3 register for this set of
+ timings
+
+ nvidia,emc-auto-cal-interval:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ pad calibration interval in microseconds
+ minimum: 0
+ maximum: 2097151
+
+ nvidia,emc-bgbias-ctl0:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_BGBIAS_CTL0 register for this set of timings
+
+ nvidia,emc-cfg:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_CFG register for this set of timings
+
+ nvidia,emc-cfg-2:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_CFG_2 register for this set of timings
+
+ nvidia,emc-ctt-term-ctrl:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_CTT_TERM_CTRL register for this set of timings
+
+ nvidia,emc-mode-1:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_MRW register for this set of timings
+
+ nvidia,emc-mode-2:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_MRW2 register for this set of timings
+
+ nvidia,emc-mode-4:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_MRW4 register for this set of timings
+
+ nvidia,emc-mode-reset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ reset value of the EMC_MRS register for this set of timings
+
+ nvidia,emc-mrs-wait-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMR_MRS_WAIT_CNT register for this set of timings
+
+ nvidia,emc-sel-dpd-ctrl:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_SEL_DPD_CTRL register for this set of timings
+
+ nvidia,emc-xm2dqspadctrl2:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_XM2DQSPADCTRL2 register for this set of timings
+
+ nvidia,emc-zcal-cnt-long:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ number of EMC clocks to wait before issuing any commands after
+ clock change
+ minimum: 0
+ maximum: 1023
+
+ nvidia,emc-zcal-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the EMC_ZCAL_INTERVAL register for this set of timings
+
+ nvidia,emc-configuration:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ EMC timing characterization data. These are the registers (see
+ section "15.6.2 EMC Registers" in the TRM) whose values need to
+ be specified, according to the board documentation.
+ items:
+ - description: EMC_RC
+ - description: EMC_RFC
+ - description: EMC_RFC_SLR
+ - description: EMC_RAS
+ - description: EMC_RP
+ - description: EMC_R2W
+ - description: EMC_W2R
+ - description: EMC_R2P
+ - description: EMC_W2P
+ - description: EMC_RD_RCD
+ - description: EMC_WR_RCD
+ - description: EMC_RRD
+ - description: EMC_REXT
+ - description: EMC_WEXT
+ - description: EMC_WDV
+ - description: EMC_WDV_MASK
+ - description: EMC_QUSE
+ - description: EMC_QUSE_WIDTH
+ - description: EMC_IBDLY
+ - description: EMC_EINPUT
+ - description: EMC_EINPUT_DURATION
+ - description: EMC_PUTERM_EXTRA
+ - description: EMC_PUTERM_WIDTH
+ - description: EMC_PUTERM_ADJ
+ - description: EMC_CDB_CNTL_1
+ - description: EMC_CDB_CNTL_2
+ - description: EMC_CDB_CNTL_3
+ - description: EMC_QRST
+ - description: EMC_QSAFE
+ - description: EMC_RDV
+ - description: EMC_RDV_MASK
+ - description: EMC_REFRESH
+ - description: EMC_BURST_REFRESH_NUM
+ - description: EMC_PRE_REFRESH_REQ_CNT
+ - description: EMC_PDEX2WR
+ - description: EMC_PDEX2RD
+ - description: EMC_PCHG2PDEN
+ - description: EMC_ACT2PDEN
+ - description: EMC_AR2PDEN
+ - description: EMC_RW2PDEN
+ - description: EMC_TXSR
+ - description: EMC_TXSRDLL
+ - description: EMC_TCKE
+ - description: EMC_TCKESR
+ - description: EMC_TPD
+ - description: EMC_TFAW
+ - description: EMC_TRPAB
+ - description: EMC_TCLKSTABLE
+ - description: EMC_TCLKSTOP
+ - description: EMC_TREFBW
+ - description: EMC_FBIO_CFG6
+ - description: EMC_ODT_WRITE
+ - description: EMC_ODT_READ
+ - description: EMC_FBIO_CFG5
+ - description: EMC_CFG_DIG_DLL
+ - description: EMC_CFG_DIG_DLL_PERIOD
+ - description: EMC_DLL_XFORM_DQS0
+ - description: EMC_DLL_XFORM_DQS1
+ - description: EMC_DLL_XFORM_DQS2
+ - description: EMC_DLL_XFORM_DQS3
+ - description: EMC_DLL_XFORM_DQS4
+ - description: EMC_DLL_XFORM_DQS5
+ - description: EMC_DLL_XFORM_DQS6
+ - description: EMC_DLL_XFORM_DQS7
+ - description: EMC_DLL_XFORM_DQS8
+ - description: EMC_DLL_XFORM_DQS9
+ - description: EMC_DLL_XFORM_DQS10
+ - description: EMC_DLL_XFORM_DQS11
+ - description: EMC_DLL_XFORM_DQS12
+ - description: EMC_DLL_XFORM_DQS13
+ - description: EMC_DLL_XFORM_DQS14
+ - description: EMC_DLL_XFORM_DQS15
+ - description: EMC_DLL_XFORM_QUSE0
+ - description: EMC_DLL_XFORM_QUSE1
+ - description: EMC_DLL_XFORM_QUSE2
+ - description: EMC_DLL_XFORM_QUSE3
+ - description: EMC_DLL_XFORM_QUSE4
+ - description: EMC_DLL_XFORM_QUSE5
+ - description: EMC_DLL_XFORM_QUSE6
+ - description: EMC_DLL_XFORM_QUSE7
+ - description: EMC_DLL_XFORM_ADDR0
+ - description: EMC_DLL_XFORM_ADDR1
+ - description: EMC_DLL_XFORM_ADDR2
+ - description: EMC_DLL_XFORM_ADDR3
+ - description: EMC_DLL_XFORM_ADDR4
+ - description: EMC_DLL_XFORM_ADDR5
+ - description: EMC_DLL_XFORM_QUSE8
+ - description: EMC_DLL_XFORM_QUSE9
+ - description: EMC_DLL_XFORM_QUSE10
+ - description: EMC_DLL_XFORM_QUSE11
+ - description: EMC_DLL_XFORM_QUSE12
+ - description: EMC_DLL_XFORM_QUSE13
+ - description: EMC_DLL_XFORM_QUSE14
+ - description: EMC_DLL_XFORM_QUSE15
+ - description: EMC_DLI_TRIM_TXDQS0
+ - description: EMC_DLI_TRIM_TXDQS1
+ - description: EMC_DLI_TRIM_TXDQS2
+ - description: EMC_DLI_TRIM_TXDQS3
+ - description: EMC_DLI_TRIM_TXDQS4
+ - description: EMC_DLI_TRIM_TXDQS5
+ - description: EMC_DLI_TRIM_TXDQS6
+ - description: EMC_DLI_TRIM_TXDQS7
+ - description: EMC_DLI_TRIM_TXDQS8
+ - description: EMC_DLI_TRIM_TXDQS9
+ - description: EMC_DLI_TRIM_TXDQS10
+ - description: EMC_DLI_TRIM_TXDQS11
+ - description: EMC_DLI_TRIM_TXDQS12
+ - description: EMC_DLI_TRIM_TXDQS13
+ - description: EMC_DLI_TRIM_TXDQS14
+ - description: EMC_DLI_TRIM_TXDQS15
+ - description: EMC_DLL_XFORM_DQ0
+ - description: EMC_DLL_XFORM_DQ1
+ - description: EMC_DLL_XFORM_DQ2
+ - description: EMC_DLL_XFORM_DQ3
+ - description: EMC_DLL_XFORM_DQ4
+ - description: EMC_DLL_XFORM_DQ5
+ - description: EMC_DLL_XFORM_DQ6
+ - description: EMC_DLL_XFORM_DQ7
+ - description: EMC_XM2CMDPADCTRL
+ - description: EMC_XM2CMDPADCTRL4
+ - description: EMC_XM2CMDPADCTRL5
+ - description: EMC_XM2DQPADCTRL2
+ - description: EMC_XM2DQPADCTRL3
+ - description: EMC_XM2CLKPADCTRL
+ - description: EMC_XM2CLKPADCTRL2
+ - description: EMC_XM2COMPPADCTRL
+ - description: EMC_XM2VTTGENPADCTRL
+ - description: EMC_XM2VTTGENPADCTRL2
+ - description: EMC_XM2VTTGENPADCTRL3
+ - description: EMC_XM2DQSPADCTRL3
+ - description: EMC_XM2DQSPADCTRL4
+ - description: EMC_XM2DQSPADCTRL5
+ - description: EMC_XM2DQSPADCTRL6
+ - description: EMC_DSR_VTTGEN_DRV
+ - description: EMC_TXDSRVTTGEN
+ - description: EMC_FBIO_SPARE
+ - description: EMC_ZCAL_WAIT_CNT
+ - description: EMC_MRS_WAIT_CNT2
+ - description: EMC_CTT
+ - description: EMC_CTT_DURATION
+ - description: EMC_CFG_PIPE
+ - description: EMC_DYN_SELF_REF_CONTROL
+ - description: EMC_QPOP
+
+ required:
+ - clock-frequency
+ - nvidia,emc-auto-cal-config
+ - nvidia,emc-auto-cal-config2
+ - nvidia,emc-auto-cal-config3
+ - nvidia,emc-auto-cal-interval
+ - nvidia,emc-bgbias-ctl0
+ - nvidia,emc-cfg
+ - nvidia,emc-cfg-2
+ - nvidia,emc-ctt-term-ctrl
+ - nvidia,emc-mode-1
+ - nvidia,emc-mode-2
+ - nvidia,emc-mode-4
+ - nvidia,emc-mode-reset
+ - nvidia,emc-mrs-wait-cnt
+ - nvidia,emc-sel-dpd-ctrl
+ - nvidia,emc-xm2dqspadctrl2
+ - nvidia,emc-zcal-cnt-long
+ - nvidia,emc-zcal-interval
+ - nvidia,emc-configuration
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra124-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mc: memory-controller@70019000 {
+ compatible = "nvidia,tegra124-mc";
+ reg = <0x0 0x70019000 0x0 0x1000>;
+ clocks = <&tegra_car TEGRA124_CLK_MC>;
+ clock-names = "mc";
+
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+ #iommu-cells = <1>;
+ };
+
+ external-memory-controller@7001b000 {
+ compatible = "nvidia,tegra124-emc";
+ reg = <0x0 0x7001b000 0x0 0x1000>;
+ clocks = <&car TEGRA124_CLK_EMC>;
+ clock-names = "emc";
+
+ nvidia,memory-controller = <&mc>;
+
+ emc-timings-0 {
+ nvidia,ram-code = <3>;
+
+ timing-0 {
+ clock-frequency = <12750000>;
+
+ nvidia,emc-zcal-cnt-long = <0x00000042>;
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-ctt-term-ctrl = <0x00000802>;
+ nvidia,emc-cfg = <0x73240000>;
+ nvidia,emc-cfg-2 = <0x000008c5>;
+ nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+ nvidia,emc-bgbias-ctl0 = <0x00000008>;
+ nvidia,emc-auto-cal-config = <0xa1430000>;
+ nvidia,emc-auto-cal-config2 = <0x00000000>;
+ nvidia,emc-auto-cal-config3 = <0x00000000>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-4 = <0x00000000>;
+
+ nvidia,emc-configuration = <
+ 0x00000000 /* EMC_RC */
+ 0x00000003 /* EMC_RFC */
+ 0x00000000 /* EMC_RFC_SLR */
+ 0x00000000 /* EMC_RAS */
+ 0x00000000 /* EMC_RP */
+ 0x00000004 /* EMC_R2W */
+ 0x0000000a /* EMC_W2R */
+ 0x00000003 /* EMC_R2P */
+ 0x0000000b /* EMC_W2P */
+ 0x00000000 /* EMC_RD_RCD */
+ 0x00000000 /* EMC_WR_RCD */
+ 0x00000003 /* EMC_RRD */
+ 0x00000003 /* EMC_REXT */
+ 0x00000000 /* EMC_WEXT */
+ 0x00000006 /* EMC_WDV */
+ 0x00000006 /* EMC_WDV_MASK */
+ 0x00000006 /* EMC_QUSE */
+ 0x00000002 /* EMC_QUSE_WIDTH */
+ 0x00000000 /* EMC_IBDLY */
+ 0x00000005 /* EMC_EINPUT */
+ 0x00000005 /* EMC_EINPUT_DURATION */
+ 0x00010000 /* EMC_PUTERM_EXTRA */
+ 0x00000003 /* EMC_PUTERM_WIDTH */
+ 0x00000000 /* EMC_PUTERM_ADJ */
+ 0x00000000 /* EMC_CDB_CNTL_1 */
+ 0x00000000 /* EMC_CDB_CNTL_2 */
+ 0x00000000 /* EMC_CDB_CNTL_3 */
+ 0x00000004 /* EMC_QRST */
+ 0x0000000c /* EMC_QSAFE */
+ 0x0000000d /* EMC_RDV */
+ 0x0000000f /* EMC_RDV_MASK */
+ 0x00000060 /* EMC_REFRESH */
+ 0x00000000 /* EMC_BURST_REFRESH_NUM */
+ 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+ 0x00000002 /* EMC_PDEX2WR */
+ 0x00000002 /* EMC_PDEX2RD */
+ 0x00000001 /* EMC_PCHG2PDEN */
+ 0x00000000 /* EMC_ACT2PDEN */
+ 0x00000007 /* EMC_AR2PDEN */
+ 0x0000000f /* EMC_RW2PDEN */
+ 0x00000005 /* EMC_TXSR */
+ 0x00000005 /* EMC_TXSRDLL */
+ 0x00000004 /* EMC_TCKE */
+ 0x00000005 /* EMC_TCKESR */
+ 0x00000004 /* EMC_TPD */
+ 0x00000000 /* EMC_TFAW */
+ 0x00000000 /* EMC_TRPAB */
+ 0x00000005 /* EMC_TCLKSTABLE */
+ 0x00000005 /* EMC_TCLKSTOP */
+ 0x00000064 /* EMC_TREFBW */
+ 0x00000000 /* EMC_FBIO_CFG6 */
+ 0x00000000 /* EMC_ODT_WRITE */
+ 0x00000000 /* EMC_ODT_READ */
+ 0x106aa298 /* EMC_FBIO_CFG5 */
+ 0x002c00a0 /* EMC_CFG_DIG_DLL */
+ 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+ 0x00064000 /* EMC_DLL_XFORM_DQS0 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS1 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS2 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS3 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS4 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS5 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS6 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS7 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS8 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS9 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS10 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS11 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS12 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS13 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS14 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS15 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+ 0x10000280 /* EMC_XM2CMDPADCTRL */
+ 0x00000000 /* EMC_XM2CMDPADCTRL4 */
+ 0x00111111 /* EMC_XM2CMDPADCTRL5 */
+ 0x00000000 /* EMC_XM2DQPADCTRL2 */
+ 0x00000000 /* EMC_XM2DQPADCTRL3 */
+ 0x77ffc081 /* EMC_XM2CLKPADCTRL */
+ 0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+ 0x81f1f108 /* EMC_XM2COMPPADCTRL */
+ 0x07070004 /* EMC_XM2VTTGENPADCTRL */
+ 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+ 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL3 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL4 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL5 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL6 */
+ 0x0000003f /* EMC_DSR_VTTGEN_DRV */
+ 0x00000007 /* EMC_TXDSRVTTGEN */
+ 0x00000000 /* EMC_FBIO_SPARE */
+ 0x00000042 /* EMC_ZCAL_WAIT_CNT */
+ 0x000e000e /* EMC_MRS_WAIT_CNT2 */
+ 0x00000000 /* EMC_CTT */
+ 0x00000003 /* EMC_CTT_DURATION */
+ 0x0000f2f3 /* EMC_CFG_PIPE */
+ 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+ 0x0000000a /* EMC_QPOP */
+ >;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
new file mode 100644
index 000000000000..12516bd89cf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) SoC Memory Controller
+
+maintainers:
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ The NVIDIA Tegra186 SoC features a 128 bit memory controller that is split
+ into four 32 bit channels to support LPDDR4 with x16 subpartitions. The MC
+ handles memory requests for 40-bit virtual addresses from internal clients
+ and arbitrates among them to allocate memory bandwidth.
+
+ Up to 15 GiB of physical memory can be supported. Security features such as
+ encryption of traffic to and from DRAM via general security apertures are
+ available for video and other secure applications, as well as DRAM ECC for
+ automotive safety applications (single bit error correction and double bit
+ error detection).
+
+properties:
+ $nodename:
+ pattern: "^memory-controller@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - enum:
+ - nvidia,tegra186-mc
+ - nvidia,tegra194-mc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
+ dma-ranges: true
+
+patternProperties:
+ "^external-memory-controller@[0-9a-f]+$":
+ description:
+ The bulk of the work involved in controlling the external memory
+ controller on NVIDIA Tegra186 and later is performed on the BPMP. This
+ coprocessor exposes the EMC clock that is used to set the frequency at
+ which the external memory is clocked and a remote procedure call that
+ can be used to obtain the set of available frequencies.
+ type: object
+ properties:
+ compatible:
+ items:
+ - enum:
+ - nvidia,tegra186-emc
+ - nvidia,tegra194-emc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: external memory clock
+
+ clock-names:
+ items:
+ - const: emc
+
+ nvidia,bpmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle of the node representing the BPMP
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra186-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ memory-controller@2c00000 {
+ compatible = "nvidia,tegra186-mc";
+ reg = <0x0 0x02c00000 0x0 0xb0000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+
+ /*
+ * Memory clients have access to all 40 bits that the memory
+ * controller can address.
+ */
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+ external-memory-controller@2c60000 {
+ compatible = "nvidia,tegra186-emc";
+ reg = <0x0 0x02c60000 0x0 0x50000>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_EMC>;
+ clock-names = "emc";
+
+ nvidia,bpmp = <&bpmp>;
+ };
+ };
+
+ bpmp: bpmp {
+ compatible = "nvidia,tegra186-bpmp";
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
index a28569540683..e8c525569f10 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
@@ -3,7 +3,9 @@
The GPBR are a set of battery-backed registers.
Required properties:
-- compatible: "atmel,at91sam9260-gpbr", "syscon"
+- compatible: Should be one of the following:
+ "atmel,at91sam9260-gpbr", "syscon"
+ "microchip,sam9x60-gpbr", "syscon"
- reg: contains offset/length value of the GPBR memory
region.
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
index e3ef50ca02a5..89d05c64fb01 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@@ -13,6 +13,7 @@ Required properties:
"atmel,at91sam9n12-matrix", "syscon"
"atmel,at91sam9x5-matrix", "syscon"
"atmel,sama5d3-matrix", "syscon"
+ "microchip,sam9x60-matrix", "syscon"
- reg: Contains offset/length value of the Bus Matrix
memory region.
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
index 1103ce2030fb..5696d9fcb5dc 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -9,6 +9,7 @@ Required properties:
"atmel,at91sam9260-smc", "syscon"
"atmel,sama5d3-smc", "syscon"
"atmel,sama5d2-smc", "syscon"
+ "microchip,sam9x60-smc", "syscon"
- reg: Contains offset/length value of the SMC memory
region.
diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
index 0e1fa5bc6a30..f2e2e28b317c 100644
--- a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
@@ -18,6 +18,7 @@ Required properties:
Optional properties:
===================
+- reg: A hint for the memory regions associated with the P2A controller
- memory-region: A phandle to a reserved_memory region to be used for the PCI
to AHB mapping
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 68b51dc58816..3aa297c97ab6 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -57,6 +57,7 @@ Required properties:
"atmel,at91sam9g45-pmecc"
"atmel,sama5d4-pmecc"
"atmel,sama5d2-pmecc"
+ "microchip,sam9x60-pmecc"
- reg: should contain 2 register ranges. The first one is pointing to the PMECC
block, and the second one to the PMECC_ERRLOC block.
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt
index 14e52a0d86ec..218a3b3eb27e 100644
--- a/Documentation/devicetree/bindings/net/can/atmel-can.txt
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@@ -1,7 +1,8 @@
* AT91 CAN *
Required properties:
- - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+ - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or
+ "microchip,sam9x60-can"
- reg: Should contain CAN controller registers location and length
- interrupts: Should contain IRQ line for the CAN controller
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 19e4a7d91511..85c6551b602a 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -7,6 +7,7 @@ Required properties:
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
"renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
"renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
+ "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
"renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
@@ -36,8 +37,8 @@ Required properties:
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
-Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
-R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+R8A77965, R8A77990, and R8A77995:
For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
be used by both CAN and CAN FD controller at the same time. It needs to be
scaled to maximum frequency if any of these controllers use it. This is done
diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
index a901cd9be29e..13a4e34c0c73 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible: Must contain one or more of the following:
- "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
- "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
+ - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller.
- "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
- "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
- "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
@@ -31,8 +32,8 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
child node supports the "status" property only, which is used to
enable/disable the respective channel.
-Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
-R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+R8A77965, R8A77990, and R8A77995:
In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
and CAN FD controller at the same time. It needs to be scaled to maximum
frequency if any of these controllers use it. This is done using the below
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
new file mode 100644
index 000000000000..5ab436189f3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell MMP3 HSIC PHY
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+ compatible:
+ const: marvell,mmp3-hsic-phy
+
+ reg:
+ maxItems: 1
+ description: base address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to reset
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - "#phy-cells"
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ hsic-phy@f0001800 {
+ compatible = "marvell,mmp3-hsic-phy";
+ reg = <0xf0001800 0x40>;
+ reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 39ad8657d018..bb690e20c368 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -22,6 +22,9 @@ description: |+
properties:
compatible:
const: aspeed,ast2400-pinctrl
+ reg:
+ description: |
+ A hint for the memory regions associated with the pin-controller
patternProperties:
'^.*$':
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 3c6405be07ed..f7f5d57f2c9a 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -23,6 +23,9 @@ description: |+
properties:
compatible:
const: aspeed,ast2500-pinctrl
+ reg:
+ description: |
+ A hint for the memory regions associated with the pin-controller
aspeed,external-nodes:
minItems: 2
maxItems: 2
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 4a21fe77ee1d..7dcab2bf8128 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -30,13 +30,51 @@ properties:
- items:
- const: allwinner,sun50i-h5-pwm
- const: allwinner,sun5i-a13-pwm
+ - const: allwinner,sun50i-h6-pwm
reg:
maxItems: 1
clocks:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: Module Clock
+ - description: Bus Clock
+
+ # Even though it only applies to subschemas under the conditionals,
+ # not listing them here will trigger a warning because of the
+ # additionalsProperties set to false.
+ clock-names: true
+
+ resets:
maxItems: 1
+if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun50i-h6-pwm
+
+then:
+ properties:
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: mod
+ - const: bus
+
+ required:
+ - clock-names
+ - resets
+
+else:
+ properties:
+ clocks:
+ maxItems: 1
+
required:
- "#pwm-cells"
- compatible
@@ -54,4 +92,17 @@ examples:
#pwm-cells = <3>;
};
+ - |
+ #include <dt-bindings/clock/sun50i-h6-ccu.h>
+ #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+ pwm@300a000 {
+ compatible = "allwinner,sun50i-h6-pwm";
+ reg = <0x0300a000 0x400>;
+ clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+ clock-names = "mod", "bus";
+ resets = <&ccu RST_BUS_PWM>;
+ #pwm-cells = <3>;
+ };
+
...
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
index 9dff7e5cae6a..29159f4e65ab 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -11,6 +11,7 @@ Required Properties:
- compatible: must contain one or more of the following:
- "renesas,tmu-r8a7740" for the r8a7740 TMU
- "renesas,tmu-r8a774a1" for the r8a774A1 TMU
+ - "renesas,tmu-r8a774b1" for the r8a774B1 TMU
- "renesas,tmu-r8a774c0" for the r8a774C0 TMU
- "renesas,tmu-r8a7778" for the r8a7778 TMU
- "renesas,tmu-r8a7779" for the r8a7779 TMU
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 7fcd48adc276..9e67944bec9c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1034,6 +1034,8 @@ patternProperties:
description: Variscite Ltd.
"^via,.*":
description: VIA Technologies, Inc.
+ "^videostrong,.*":
+ description: Videostrong Technology Co., Ltd.
"^virtio,.*":
description: Virtual I/O Device Specification, developed by the OASIS consortium
"^vishay,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index ac4967ae5850..6d8160896768 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2092,6 +2092,7 @@ F: drivers/rtc/rtc-pl031.c
F: drivers/watchdog/coh901327_wdt.c
F: Documentation/devicetree/bindings/arm/ste-*
F: Documentation/devicetree/bindings/arm/ux500/
+F: Documentation/devicetree/bindings/arm/ux500.yaml
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
ARM/NUVOTON NPCM ARCHITECTURE
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08011dc8c7a6..d6546d2676b9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -37,18 +37,24 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91-ariag25.dtb \
at91-ariettag25.dtb \
at91-cosino_mega2560.dtb \
- at91-kizboxmini.dtb \
+ at91-kizboxmini-base.dtb \
+ at91-kizboxmini-mb.dtb \
+ at91-kizboxmini-rd.dtb \
+ at91-smartkiz.dtb \
at91-wb45n.dtb \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+ at91-sam9x60ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2-2.dtb \
at91-kizbox3-hs.dtb \
at91-nattis-2-natte-2.dtb \
at91-sama5d27_som1_ek.dtb \
+ at91-sama5d27_wlsom1_ek.dtb \
at91-sama5d2_ptc_ek.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
@@ -422,6 +428,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw560x.dtb \
imx6dl-gw5903.dtb \
imx6dl-gw5904.dtb \
+ imx6dl-gw5907.dtb \
+ imx6dl-gw5910.dtb \
+ imx6dl-gw5912.dtb \
+ imx6dl-gw5913.dtb \
imx6dl-hummingboard.dtb \
imx6dl-hummingboard-emmc-som-v15.dtb \
imx6dl-hummingboard-som-v15.dtb \
@@ -493,6 +503,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw560x.dtb \
imx6q-gw5903.dtb \
imx6q-gw5904.dtb \
+ imx6q-gw5907.dtb \
+ imx6q-gw5910.dtb \
+ imx6q-gw5912.dtb \
+ imx6q-gw5913.dtb \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-hummingboard-emmc-som-v15.dtb \
@@ -554,6 +568,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
+ imx6sl-tolino-shine3.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SLL) += \
imx6sll-evk.dtb \
@@ -612,6 +627,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7s-mba7.dtb \
imx7s-warp.dtb
dtb-$(CONFIG_SOC_IMX7ULP) += \
+ imx7ulp-com.dtb \
imx7ulp-evk.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-moxa-uc-8410a.dtb \
@@ -691,6 +707,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-devkit8000.dtb \
omap3-devkit8000-lcd43.dtb \
omap3-devkit8000-lcd70.dtb \
+ omap3-echo.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
omap3-gta04a3.dtb \
@@ -1129,6 +1146,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-orangepi-zero-plus2.dtb \
sun8i-h3-rervision-dvk.dtb \
+ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
@@ -1182,7 +1200,9 @@ dtb-$(CONFIG_ARCH_U8500) += \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
- ste-hrefv60plus-tvk.dtb
+ ste-hrefv60plus-tvk.dtb \
+ ste-href520-tvk.dtb \
+ ste-ux500-samsung-golden.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ld4-ref.dtb \
uniphier-ld6b-ref.dtb \
@@ -1238,6 +1258,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-clearfog-gtr-s4.dtb \
+ armada-385-clearfog-gtr-l8.dtb \
armada-385-db-88f6820-amc.dtb \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 6f0a6be93098..68252dab32c3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -113,7 +113,7 @@
};
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 0>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -121,35 +121,15 @@
};
panel {
- compatible = "ti,tilcdc,panel";
- status = "okay";
+ compatible = "tfc,s9700rtwv43tr-01b";
+
pinctrl-names = "default";
pinctrl-0 = <&lcd_pins_s0>;
- panel-info {
- ac-bias = <255>;
- ac-bias-intrpt = <0>;
- dma-burst-sz = <16>;
- bpp = <32>;
- fdd = <0x80>;
- sync-edge = <0>;
- sync-ctrl = <1>;
- raster-order = <0>;
- fifo-th = <0>;
- };
+ backlight = <&backlight>;
- display-timings {
- 800x480p62 {
- clock-frequency = <30000000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <39>;
- hback-porch = <39>;
- hsync-len = <47>;
- vback-porch = <29>;
- vfront-porch = <13>;
- vsync-len = <2>;
- hsync-active = <1>;
- vsync-active = <1>;
+ port {
+ panel_0: endpoint@0 {
+ remote-endpoint = <&lcdc_0>;
};
};
};
@@ -500,6 +480,12 @@
status = "okay";
blue-and-red-wiring = "crossed";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&panel_0>;
+ };
+ };
};
&elm {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index a97f9df460c1..32f515a295ee 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -183,36 +183,16 @@
};
panel {
- compatible = "ti,tilcdc,panel";
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
+
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_pins_default>;
pinctrl-1 = <&lcd_pins_sleep>;
backlight = <&lcd_bl>;
- status = "okay";
- panel-info {
- ac-bias = <255>;
- ac-bias-intrpt = <0>;
- dma-burst-sz = <16>;
- bpp = <32>;
- fdd = <0x80>;
- sync-edge = <0>;
- sync-ctrl = <1>;
- raster-order = <0>;
- fifo-th = <0>;
- };
- display-timings {
- 480x272 {
- hactive = <480>;
- vactive = <272>;
- hback-porch = <43>;
- hfront-porch = <8>;
- hsync-len = <4>;
- vback-porch = <12>;
- vfront-porch = <4>;
- vsync-len = <10>;
- clock-frequency = <9000000>;
- hsync-active = <0>;
- vsync-active = <0>;
+
+ port {
+ panel_0: endpoint@0 {
+ remote-endpoint = <&lcdc_0>;
};
};
};
@@ -725,6 +705,12 @@
status = "okay";
blue-and-red-wiring = "crossed";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&panel_0>;
+ };
+ };
};
&rtc {
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 204bccfcc110..021eb57261fe 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -287,6 +287,19 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ /* osd9616p0899-10 */
+ display@3c {
+ compatible = "solomon,ssd1306fb-i2c";
+ reg = <0x3c>;
+ solomon,height = <16>;
+ solomon,width = <96>;
+ solomon,com-seq;
+ solomon,com-invdir;
+ solomon,page-offset = <0>;
+ solomon,prechargep1 = <2>;
+ solomon,prechargep2 = <13>;
+ };
};
&spi0 {
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 3a8a205c27b5..4e2986f0c604 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -225,7 +225,6 @@
target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "adc_tsc";
reg = <0xd000 0x4>,
<0xd010 0x4>;
reg-names = "rev", "sysc";
@@ -1009,7 +1008,6 @@
target-module@30000 { /* 0x48030000, ap 77 08.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spi0";
reg = <0x30000 0x4>,
<0x30110 0x4>,
<0x30114 0x4>;
@@ -1134,7 +1132,6 @@
target-module@42000 { /* 0x48042000, ap 24 1c.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer3";
reg = <0x42000 0x4>,
<0x42010 0x4>,
<0x42014 0x4>;
@@ -1160,7 +1157,6 @@
target-module@44000 { /* 0x48044000, ap 26 26.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer4";
reg = <0x44000 0x4>,
<0x44010 0x4>,
<0x44014 0x4>;
@@ -1187,7 +1183,6 @@
target-module@46000 { /* 0x48046000, ap 28 28.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer5";
reg = <0x46000 0x4>,
<0x46010 0x4>,
<0x46014 0x4>;
@@ -1214,7 +1209,6 @@
target-module@48000 { /* 0x48048000, ap 30 22.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer6";
reg = <0x48000 0x4>,
<0x48010 0x4>,
<0x48014 0x4>;
@@ -1241,7 +1235,6 @@
target-module@4a000 { /* 0x4804a000, ap 85 60.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer7";
reg = <0x4a000 0x4>,
<0x4a010 0x4>,
<0x4a014 0x4>;
@@ -1344,7 +1337,6 @@
target-module@80000 { /* 0x48080000, ap 38 18.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "elm";
reg = <0x80000 0x4>,
<0x80010 0x4>,
<0x80014 0x4>;
@@ -1412,7 +1404,6 @@
target-module@ca000 { /* 0x480ca000, ap 91 40.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spinlock";
reg = <0xca000 0x4>,
<0xca010 0x4>,
<0xca014 0x4>;
@@ -1533,7 +1524,6 @@
target-module@a0000 { /* 0x481a0000, ap 79 24.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spi1";
reg = <0xa0000 0x4>,
<0xa0110 0x4>,
<0xa0114 0x4>;
@@ -1749,7 +1739,6 @@
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
- ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
<&dcan0_fck>;
@@ -1773,7 +1762,6 @@
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
- ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
<&dcan1_fck>;
@@ -1863,7 +1851,6 @@
target-module@0 { /* 0x48300000, ap 66 48.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss0";
reg = <0x0 0x4>,
<0x4 0x4>;
reg-names = "rev", "sysc";
@@ -1916,7 +1903,6 @@
target-module@2000 { /* 0x48302000, ap 68 52.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss1";
reg = <0x2000 0x4>,
<0x2004 0x4>;
reg-names = "rev", "sysc";
@@ -1969,7 +1955,6 @@
target-module@4000 { /* 0x48304000, ap 70 44.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss2";
reg = <0x4000 0x4>,
<0x4004 0x4>;
reg-names = "rev", "sysc";
@@ -2022,7 +2007,6 @@
target-module@e000 { /* 0x4830e000, ap 72 4a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "lcdc";
reg = <0xe000 0x4>,
<0xe054 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 646f11430dad..e403fb765e70 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -439,23 +439,62 @@
status = "disabled";
};
- sham: sham@53100000 {
- compatible = "ti,omap4-sham";
- ti,hwmods = "sham";
- reg = <0x53100000 0x200>;
- interrupts = <109>;
- dmas = <&edma 36 0>;
- dma-names = "rx";
+ sham_target: target-module@53100000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x53100100 0x4>,
+ <0x53100110 0x4>,
+ <0x53100114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53100000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap4-sham";
+ reg = <0 0x200>;
+ interrupts = <109>;
+ dmas = <&edma 36 0>;
+ dma-names = "rx";
+ };
};
- aes: aes@53500000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes";
- reg = <0x53500000 0xa0>;
- interrupts = <103>;
- dmas = <&edma 6 0>,
- <&edma 5 0>;
- dma-names = "tx", "rx";
+ aes_target: target-module@53500000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53500080 0x4>,
+ <0x53500084 0x4>,
+ <0x53500088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53500000 0x1000>;
+
+ aes: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <103>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
+ dma-names = "tx", "rx";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 125379ecab2f..e0b5a00e2078 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -74,7 +74,7 @@
clock-names = "ick";
};
- davinci_mdio: ethernet@5c030000 {
+ davinci_mdio: mdio@5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/am3703.dtsi
new file mode 100644
index 000000000000..2b994ae790c9
--- /dev/null
+++ b/arch/arm/boot/dts/am3703.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+ status = "disabled";
+};
+
+&sgx_module {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/am3715.dtsi
new file mode 100644
index 000000000000..ab328e8c0bd8
--- /dev/null
+++ b/arch/arm/boot/dts/am3715.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ca0aa3f26c0a..e4072d0f871a 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -256,33 +256,92 @@
};
};
- sham: sham@53100000 {
- compatible = "ti,omap5-sham";
- ti,hwmods = "sham";
- reg = <0x53100000 0x300>;
- dmas = <&edma 36 0>;
- dma-names = "rx";
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ sham_target: target-module@53100000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x53100100 0x4>,
+ <0x53100110 0x4>,
+ <0x53100114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53100000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap5-sham";
+ reg = <0 0x300>;
+ dmas = <&edma 36 0>;
+ dma-names = "rx";
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- aes: aes@53501000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes";
- reg = <0x53501000 0xa0>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 6 0>,
- <&edma 5 0>;
- dma-names = "tx", "rx";
+ aes_target: target-module@53501000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53501080 0x4>,
+ <0x53501084 0x4>,
+ <0x53501088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x53501000 0x1000>;
+
+ aes: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
+ dma-names = "tx", "rx";
+ };
};
- des: des@53701000 {
- compatible = "ti,omap4-des";
- ti,hwmods = "des";
- reg = <0x53701000 0xa0>;
- interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 34 0>,
- <&edma 33 0>;
- dma-names = "tx", "rx";
+ des_target: target-module@53701000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x53701030 0x4>,
+ <0x53701034 0x4>,
+ <0x53701038 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l3_clkdm */
+ clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x53701000 0x1000>;
+
+ des: des@0 {
+ compatible = "ti,omap4-des";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma 34 0>,
+ <&edma 33 0>;
+ dma-names = "tx", "rx";
+ };
};
gpmc: gpmc@50000000 {
@@ -305,17 +364,34 @@
status = "disabled";
};
- qspi: spi@47900000 {
- compatible = "ti,am4372-qspi";
- reg = <0x47900000 0x100>,
- <0x30000000 0x4000000>;
- reg-names = "qspi_base", "qspi_mmap";
+ target-module@47900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x47900000 0x4>,
+ <0x47900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "qspi";
- interrupts = <0 138 0x4>;
- num-cs = <4>;
- status = "disabled";
+ #size-cells = <1>;
+ ranges = <0x0 0x47900000 0x1000>,
+ <0x30000000 0x30000000 0x4000000>;
+
+ qspi: spi@0 {
+ compatible = "ti,am4372-qspi";
+ reg = <0 0x100>,
+ <0x30000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ clocks = <&dpll_per_m2_div4_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 138 0x4>;
+ num-cs = <4>;
+ };
};
dss: dss@4832a000 {
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 0dd59ee14585..e18e17d31272 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -225,7 +225,6 @@
target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "adc_tsc";
reg = <0xd000 0x4>,
<0xd010 0x4>;
reg-names = "rev", "sysc";
@@ -763,7 +762,6 @@
target-module@30000 { /* 0x48030000, ap 65 08.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spi0";
reg = <0x30000 0x4>,
<0x30110 0x4>,
<0x30114 0x4>;
@@ -900,7 +898,6 @@
target-module@42000 { /* 0x48042000, ap 20 24.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer3";
reg = <0x42000 0x4>,
<0x42010 0x4>,
<0x42014 0x4>;
@@ -927,7 +924,6 @@
target-module@44000 { /* 0x48044000, ap 22 26.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer4";
reg = <0x44000 0x4>,
<0x44010 0x4>,
<0x44014 0x4>;
@@ -955,7 +951,6 @@
target-module@46000 { /* 0x48046000, ap 24 28.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer5";
reg = <0x46000 0x4>,
<0x46010 0x4>,
<0x46014 0x4>;
@@ -983,7 +978,6 @@
target-module@48000 { /* 0x48048000, ap 26 1a.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer6";
reg = <0x48000 0x4>,
<0x48010 0x4>,
<0x48014 0x4>;
@@ -1011,7 +1005,6 @@
target-module@4a000 { /* 0x4804a000, ap 71 48.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer7";
reg = <0x4a000 0x4>,
<0x4a010 0x4>,
<0x4a014 0x4>;
@@ -1107,7 +1100,6 @@
target-module@80000 { /* 0x48080000, ap 32 18.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "elm";
reg = <0x80000 0x4>,
<0x80010 0x4>,
<0x80014 0x4>;
@@ -1169,7 +1161,6 @@
target-module@ca000 { /* 0x480ca000, ap 77 38.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spinlock";
reg = <0xca000 0x4>,
<0xca010 0x4>,
<0xca014 0x4>;
@@ -1282,7 +1273,6 @@
target-module@a0000 { /* 0x481a0000, ap 67 2c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spi1";
reg = <0xa0000 0x4>,
<0xa0110 0x4>,
<0xa0114 0x4>;
@@ -1313,7 +1303,6 @@
target-module@a2000 { /* 0x481a2000, ap 69 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spi2";
reg = <0xa2000 0x4>,
<0xa2110 0x4>,
<0xa2114 0x4>;
@@ -1344,7 +1333,6 @@
target-module@a4000 { /* 0x481a4000, ap 92 62.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spi3";
reg = <0xa4000 0x4>,
<0xa4110 0x4>,
<0xa4114 0x4>;
@@ -1527,7 +1515,6 @@
target-module@c1000 { /* 0x481c1000, ap 94 68.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer8";
reg = <0xc1000 0x4>,
<0xc1010 0x4>,
<0xc1014 0x4>;
@@ -1556,7 +1543,6 @@
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
- ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
clock-names = "fck";
@@ -1577,7 +1563,6 @@
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
- ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
clock-names = "fck";
@@ -1695,7 +1680,6 @@
target-module@0 { /* 0x48300000, ap 56 40.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss0";
reg = <0x0 0x4>,
<0x4 0x4>;
reg-names = "rev", "sysc";
@@ -1748,7 +1732,6 @@
target-module@2000 { /* 0x48302000, ap 58 4a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss1";
reg = <0x2000 0x4>,
<0x2004 0x4>;
reg-names = "rev", "sysc";
@@ -1801,7 +1784,6 @@
target-module@4000 { /* 0x48304000, ap 60 44.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss2";
reg = <0x4000 0x4>,
<0x4004 0x4>;
reg-names = "rev", "sysc";
@@ -1854,7 +1836,6 @@
target-module@6000 { /* 0x48306000, ap 96 58.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss3";
reg = <0x6000 0x4>,
<0x6004 0x4>;
reg-names = "rev", "sysc";
@@ -1896,7 +1877,6 @@
target-module@8000 { /* 0x48308000, ap 98 54.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss4";
reg = <0x8000 0x4>,
<0x8004 0x4>;
reg-names = "rev", "sysc";
@@ -1938,7 +1918,6 @@
target-module@a000 { /* 0x4830a000, ap 100 60.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss5";
reg = <0xa000 0x4>,
<0xa004 0x4>;
reg-names = "rev", "sysc";
@@ -2086,7 +2065,6 @@
target-module@26000 { /* 0x48326000, ap 86 66.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "vpfe0";
reg = <0x26000 0x4>,
<0x26104 0x4>;
reg-names = "rev", "sysc";
@@ -2113,7 +2091,6 @@
target-module@28000 { /* 0x48328000, ap 75 0e.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "vpfe1";
reg = <0x28000 0x4>,
<0x28104 0x4>;
reg-names = "rev", "sysc";
@@ -2162,7 +2139,6 @@
target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer9";
reg = <0x3d000 0x4>,
<0x3d010 0x4>,
<0x3d014 0x4>;
@@ -2189,7 +2165,6 @@
target-module@3f000 { /* 0x4833f000, ap 104 5c.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer10";
reg = <0x3f000 0x4>,
<0x3f010 0x4>,
<0x3f014 0x4>;
@@ -2216,7 +2191,6 @@
target-module@41000 { /* 0x48341000, ap 106 76.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer11";
reg = <0x41000 0x4>,
<0x41010 0x4>,
<0x41014 0x4>;
@@ -2243,7 +2217,6 @@
target-module@45000 { /* 0x48345000, ap 108 6a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spi4";
reg = <0x45000 0x4>,
<0x45110 0x4>,
<0x45114 0x4>;
@@ -2358,7 +2331,6 @@
target-module@a8000 { /* 0x483a8000, ap 125 6c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "ocp2scp0";
reg = <0xa8000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
@@ -2440,7 +2412,6 @@
target-module@e8000 { /* 0x483e8000, ap 129 78.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "ocp2scp1";
reg = <0xe8000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 398721c7201c..aa5e55f98179 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -9,6 +9,7 @@
aliases {
rtc0 = &tps659038_rtc;
rtc1 = &rtc;
+ display0 = &hdmi0;
};
chosen {
@@ -96,6 +97,48 @@
default-state = "off";
};
};
+
+ hdmi0: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder@0 {
+ compatible = "ti,tpd12s016", "ti,tpd12s015";
+
+ gpios = <0>, /* optional CT_CP_HPD */
+ <0>, /* optional LS_OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
};
&dra7_pmx_core {
@@ -485,3 +528,19 @@
&cpu0 {
vdd-supply = <&smps12_reg>;
};
+
+&hdmi {
+ status = "okay";
+
+ vdda-supply = <&ldo4_reg>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
+&dss {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 000000000000..c9ac630e5874
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+ model = "SolidRun Clearfog GTR L8";
+};
+
+&mdio {
+ switch0: switch0@4 {
+ compatible = "marvell,mv88e6190";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+ reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan8";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan7";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan6";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan5";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan4";
+ phy-handle = <&switch0phy4>;
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "lan3";
+ phy-handle = <&switch0phy5>;
+ };
+
+ port@7 {
+ reg = <7>;
+ label = "lan2";
+ phy-handle = <&switch0phy6>;
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "lan1";
+ phy-handle = <&switch0phy7>;
+ };
+
+ port@10 {
+ reg = <10>;
+ label = "cpu";
+ ethernet = <&eth1>;
+ };
+
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@1 {
+ reg = <0x1>;
+ };
+
+ switch0phy1: switch0phy1@2 {
+ reg = <0x2>;
+ };
+
+ switch0phy2: switch0phy2@3 {
+ reg = <0x3>;
+ };
+
+ switch0phy3: switch0phy3@4 {
+ reg = <0x4>;
+ };
+
+ switch0phy4: switch0phy4@5 {
+ reg = <0x5>;
+ };
+
+ switch0phy5: switch0phy5@6 {
+ reg = <0x6>;
+ };
+
+ switch0phy6: switch0phy6@7 {
+ reg = <0x7>;
+ };
+
+ switch0phy7: switch0phy7@8 {
+ reg = <0x8>;
+ };
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 000000000000..fa653b379490
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+ model = "SolidRun Clearfog GTR S4";
+};
+
+&sfp0 {
+ tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+ switch0: switch0@4 {
+ compatible = "marvell,mv88e6085";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+ reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&eth1>;
+ };
+
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+
+ switch0phy3: switch0phy3@14 {
+ reg = <0x14>;
+ };
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
new file mode 100644
index 000000000000..624bbcae68c0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ * Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+ SERDES mapping -
+ 0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+ 1. 6141 switch (2.5Gbps capable)
+ 2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+ 3. USB 3.0 Host
+ 4. mini PCIe CON2 - PCIe2
+ 5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+ USB 2.0 mapping -
+ 0. USB 2.0 - 0 USB pins header CON12
+ 1. USB 2.0 - 1 mini PCIe CON2
+ 2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+ Pin mapping -
+ 0,1 - console UART
+ 2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+ front panel and PSE controller
+ 4,5 - MDC/MDIO
+ 6..17 - RGMII
+ 18 - Topaz switch reset (active low)
+ 19 - 1512 phy reset
+ 20 - 1512 phy reset (eth2, optional)
+ 21,28,37,38,39,40 - SD0
+ 22 - USB 3.0 current limiter enable (active high)
+ 24 - SFP TX fault (input active high)
+ 25 - SFP present (input active low)
+ 26,27 - I2C1 - connected to SFP
+ 29 - Fan PWM
+ 30 - CON4 mini PCIe wifi disable
+ 31 - CON3 mini PCIe wifi disable
+ 32 - Fuse programming power toggle (1.8v)
+ 33 - CON4 mini PCIe reset
+ 34 - CON2 mini PCIe wifi disable
+ 35 - CON3 mini PCIe reset
+ 36 - Rear button (GPIO active low)
+ 41 - CON1 front panel connector
+ 42 - Front LED1, or front panel CON1
+ 43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+ 44 - CON2 mini PCIe reset
+ 45 - TPM PIRQ signal, or front panel CON1
+ 46 - SFP TX disable
+ 47 - Control isolation of boot sensitive SAR signals
+ 48 - PSE reset
+ 49 - PSE OSS signal
+ 50 - PSE interrupt
+ 52 - Front LED2, or front panel
+ 53 - Front button
+ 54 - SFP LOS (input active high)
+ 55 - Fan sense
+ 56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+ 59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+ compatible = "marvell,armada385", "marvell,armada380";
+
+ aliases {
+ /* So that mvebu u-boot can update the MAC addresses */
+ ethernet1 = &eth0;
+ ethernet2 = &eth1;
+ ethernet3 = &eth2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ v_usb3_con: regulator-v-usb3-con {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "v_usb3_con";
+ vin-supply = <&reg_5p0v>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+
+ rtc@a3800 {
+ status = "okay";
+ };
+
+ i2c@11000 { /* ROM, temp sensor and front panel */
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ i2c@11100 { /* SFP (CON5/CON6) */
+ pinctrl-0 = <&cf_gtr_i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ pinctrl@18000 {
+ cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+
+ cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+
+ cf_gtr_i2c1_pins: i2c1-pins {
+ /* SFP */
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "i2c1";
+ };
+
+ cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+ marvell,pins = "mpp21", "mpp28",
+ "mpp37", "mpp38",
+ "mpp39", "mpp40";
+ marvell,function = "sd0";
+ };
+
+ cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ cf_gtr_spi1_cs_pins: spi1-cs-pins {
+ marvell,pins = "mpp59";
+ marvell,function = "spi1";
+ };
+
+ cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+ marvell,pins = "mpp53";
+ marvell,function = "gpio";
+ };
+
+ cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ };
+
+ sdhci@d8000 {
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ pinctrl-0 = <&cf_gtr_sdhci_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ vmmc = <&reg_3p3v>;
+ wp-inverted;
+ };
+
+ usb@58000 {
+ status = "okay";
+ };
+
+ usb3@f0000 {
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ vbus-supply = <&v_usb3_con>;
+ status = "okay";
+ };
+ };
+
+ pcie {
+ status = "okay";
+ /*
+ * The PCIe units are accessible through
+ * the mini-PCIe connectors on the board.
+ */
+ pcie@1,0 {
+ reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+
+ pcie@2,0 {
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+
+ pcie@3,0 {
+ reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+ };
+ };
+
+ sfp0: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+ pinctrl-names = "default";
+
+ button_0 {
+ label = "Rear Button";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+
+ button_1 {
+ label = "Front Button";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ function = LED_FUNCTION_CPU;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&bm {
+ status = "okay";
+};
+
+&bm_bppi {
+ status = "okay";
+};
+
+&eth0 {
+ /* ethernet@70000 */
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy_dedicated>;
+ phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
+ status = "okay";
+};
+
+&eth1 {
+ /* ethernet@30000 */
+ bm,pool-long = <2>;
+ bm,pool-short = <1>;
+ buffer-manager = <&bm>;
+ phys = <&comphy1 1>;
+ phy-mode = "2500base-x";
+ status = "okay";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+};
+
+&eth2 {
+ /* ethernet@34000 */
+ bm,pool-long = <3>;
+ bm,pool-short = <1>;
+ buffer-manager = <&bm>;
+ managed = "in-band-status";
+ phys = <&comphy5 1>;
+ phy-mode = "sgmii";
+ sfp = <&sfp0>;
+ status = "okay";
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ status = "okay";
+
+ phy_dedicated: ethernet-phy@0 {
+ /*
+ * Annoyingly, the marvell phy driver configures the LED
+ * register, rather than preserving reset-loaded setting.
+ * We undo that rubbish here.
+ */
+ marvell,reg-init = <3 16 0 0x1017>;
+ reg = <0>;
+ };
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spi1 {
+ /*
+ * CS0: W25Q32 flash
+ */
+ pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "w25q32", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <3000000>;
+ status = "okay";
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* U26 temperature sensor placed near SoC */
+ temp1: nct75@4c {
+ compatible = "lm75";
+ reg = <0x4c>;
+ };
+
+ /* U27 temperature sensor placed near RTC battery */
+ temp2: nct75@4d {
+ compatible = "lm75";
+ reg = <0x4d>;
+ };
+
+ /* 2Kb eeprom */
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+};
+
+&ahci0 {
+ status = "okay";
+};
+
+&ahci1 {
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-0 = <&cf_gtr_fan_pwm>;
+ pinctrl-names = "default";
+
+ wifi-disable {
+ gpio-hog;
+ gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "wifi-disable";
+ };
+};
+
+&gpio1 {
+ pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+ pinctrl-names = "default";
+
+ lte-disable {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "lte-disable";
+ };
+
+ /*
+ * This signal, when asserted, isolates Armada 38x sample at reset pins
+ * from control of external devices. Should be de-asserted after reset.
+ */
+ sar-isolation {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "sar-isolation";
+ };
+
+ poe-reset {
+ gpio-hog;
+ gpios = <16 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "poe-reset";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 0d81600ca247..a0aa1d188f0c 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -111,11 +111,6 @@
};
&i2c0 {
- clock-frequency = <400000>;
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
/*
* PCA9655 GPIO expander, up to 1MHz clock.
* 0-CON3 CLKREQ#
@@ -183,6 +178,12 @@
compatible = "microchip,mcp3021";
reg = <0x4c>;
};
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
index 705adfa8c680..fb49df2a3bce 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -140,11 +140,6 @@
soc {
internal-regs {
i2c@11000 {
- clock-frequency = <400000>;
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
/*
* PCA9655 GPIO expander, up to 1MHz clock.
* 0-Board Revision bit 0 #
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 3a7f9c1ac346..363ac4238859 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -71,6 +71,19 @@
};
};
+&i2c0 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+};
+
&pinctrl {
microsom_phy_clk_pins: microsom-phy-clk-pins {
marvell,pins = "mpp45";
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
index b1e10f0c85c9..322587b7b67d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@@ -76,7 +76,6 @@
&mac1 {
status = "okay";
- no-hw-checksum;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
index aaa77a597d1a..54e508530dce 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -75,7 +75,6 @@
&mac1 {
status = "okay";
- no-hw-checksum;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
index 52933598aac6..fe2e11c2da15 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@@ -35,7 +35,6 @@
&mac0 {
status = "okay";
use-ncsi;
- no-hw-checksum;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 13f7aefe045e..6232cd726a7f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -97,22 +97,22 @@
status = "okay";
power-supply@68 {
- compatible = "ibm,cffps2";
+ compatible = "ibm,cffps";
reg = <0x68>;
};
power-supply@69 {
- compatible = "ibm,cffps2";
+ compatible = "ibm,cffps";
reg = <0x69>;
};
power-supply@6a {
- compatible = "ibm,cffps2";
+ compatible = "ibm,cffps";
reg = <0x6a>;
};
power-supply@6b {
- compatible = "ibm,cffps2";
+ compatible = "ibm,cffps";
reg = <0x6b>;
};
};
@@ -352,18 +352,8 @@
&i2c8 {
status = "okay";
- ucd90320@b {
- compatible = "ti,ucd90160";
- reg = <0x0b>;
- };
-
- ucd90320@c {
- compatible = "ti,ucd90160";
- reg = <0x0c>;
- };
-
ucd90320@11 {
- compatible = "ti,ucd90160";
+ compatible = "ti,ucd90320";
reg = <0x11>;
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index c17bb7fce7ff..62a3ab4c1866 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -94,8 +94,6 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
index b8fdd2a8a2c9..d56b5ed09b37 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -82,8 +82,6 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
scm0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index affd2c8743b1..01074b6e3e03 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -14,7 +14,7 @@
bootargs = "console=ttyS4,115200 earlyprintk";
};
- memory {
+ memory@40000000 {
reg = <0x40000000 0x20000000>;
};
@@ -107,10 +107,7 @@
&mac0 {
status = "okay";
-
use-ncsi;
- no-hw-checksum;
-
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
@@ -236,3 +233,16 @@
&wdt2 {
aspeed,alt-boot;
};
+
+&sdmmc {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd2_default>;
+ cd-inverted;
+ disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 569dad93e162..421aa600148b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -77,8 +77,6 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 46c0891aac5a..807a0fc20670 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -179,18 +179,21 @@
compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x1e6e2000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
- pinctrl: pinctrl {
- compatible = "aspeed,ast2400-pinctrl";
- };
-
- p2a: p2a-control {
+ p2a: p2a-control@2c {
+ reg = <0x2c 0x4>;
compatible = "aspeed,ast2400-p2a-ctrl";
status = "disabled";
};
+
+ pinctrl: pinctrl@80 {
+ reg = <0x80 0x18>, <0xa0 0x10>;
+ compatible = "aspeed,ast2400-pinctrl";
+ };
};
rng: hwrng@1e6e2078 {
@@ -346,14 +349,14 @@
lpc_ctrl: lpc-ctrl@0 {
compatible = "aspeed,ast2400-lpc-ctrl";
- reg = <0x0 0x80>;
+ reg = <0x0 0x10>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
- lpc_snoop: lpc-snoop@0 {
+ lpc_snoop: lpc-snoop@10 {
compatible = "aspeed,ast2400-lpc-snoop";
- reg = <0x0 0x80>;
+ reg = <0x10 0x8>;
interrupts = <8>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index a259c63fff06..ebec0fa8baa7 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,13 +47,6 @@
reg = <0x80000000 0>;
};
- edac: sdram@1e6e0000 {
- compatible = "aspeed,ast2500-sdram-edac";
- reg = <0x1e6e0000 0x174>;
- interrupts = <0>;
- status = "disabled";
- };
-
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -213,24 +206,33 @@
#size-cells = <1>;
ranges;
+ edac: memory-controller@1e6e0000 {
+ compatible = "aspeed,ast2500-sdram-edac";
+ reg = <0x1e6e0000 0x174>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
syscon: syscon@1e6e2000 {
compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x1e6e2000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
- pinctrl: pinctrl {
- compatible = "aspeed,ast2500-pinctrl";
- aspeed,external-nodes = <&gfx &lhc>;
-
- };
-
- p2a: p2a-control {
+ p2a: p2a-control@2c {
compatible = "aspeed,ast2500-p2a-ctrl";
+ reg = <0x2c 0x4>;
status = "disabled";
};
+
+ pinctrl: pinctrl@80 {
+ compatible = "aspeed,ast2500-pinctrl";
+ reg = <0x80 0x18>, <0xa0 0x10>;
+ aspeed,external-nodes = <&gfx>, <&lhc>;
+ };
};
rng: hwrng@1e6e2078 {
@@ -460,29 +462,30 @@
lpc_ctrl: lpc-ctrl@0 {
compatible = "aspeed,ast2500-lpc-ctrl";
- reg = <0x0 0x80>;
+ reg = <0x0 0x10>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
- lpc_snoop: lpc-snoop@0 {
+ lpc_snoop: lpc-snoop@10 {
compatible = "aspeed,ast2500-lpc-snoop";
- reg = <0x0 0x80>;
+ reg = <0x10 0x8>;
interrupts = <8>;
status = "disabled";
};
- lhc: lhc@20 {
- compatible = "aspeed,ast2500-lhc";
- reg = <0x20 0x24 0x48 0x8>;
- };
-
lpc_reset: reset-controller@18 {
compatible = "aspeed,ast2500-lpc-reset";
reg = <0x18 0x4>;
#reset-cells = <1>;
};
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+ };
+
+
ibt: ibt@c0 {
compatible = "aspeed,ast2500-ibt-bmc";
reg = <0xc0 0x18>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index b72afbaadaf8..796976d275e1 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -365,7 +365,7 @@
status = "disabled";
};
- wdt4: watchdog@1e7850C0 {
+ wdt4: watchdog@1e7850c0 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e7850C0 0x40>;
status = "disabled";
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
index 7a395ba56512..7468f102bd76 100644
--- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
@@ -71,7 +71,6 @@
&mac1 {
status = "okay";
- no-hw-checksum;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 90996eaf73b2..7d938ccf71b0 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,85 +28,6 @@
};
};
- ahb {
- apb {
- tcb0: timer@fffa0000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>, <1>;
- };
-
- timer@2 {
- compatible = "atmel,tcb-timer";
- reg = <2>;
- };
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "mii";
- pinctrl-0 = <&pinctrl_macb_rmii
- &pinctrl_macb_rmii_mii_alt>;
- status = "okay";
- };
-
- usart3: serial@fffd0000 {
- status = "okay";
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- watchdog@fffffd40 {
- timeout-sec = <15>;
- atmel,max-heartbeat-sec = <16>;
- atmel,min-heartbeat-sec = <0>;
- status = "okay";
- };
- };
-
- usb0: ohci@500000 {
- num-ports = <1>;
- status = "okay";
- };
-
- ebi: ebi@10000000 {
- status = "okay";
-
- nand_controller: nand-controller {
- status = "okay";
- pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
- pinctrl-names = "default";
-
- nand@3 {
- reg = <0x3 0x0 0x800000>;
- rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootstrap@0 {
- label = "bootstrap";
- reg = <0x0 0x20000>;
- };
-
- ubi@20000 {
- label = "ubi";
- reg = <0x20000 0x7fe0000>;
- };
- };
- };
- };
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -127,15 +48,6 @@
};
};
- i2c-gpio-0 {
- status = "okay";
-
- rtc: pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
-
pwm_leds {
compatible = "pwm-leds";
@@ -179,3 +91,87 @@
&pinctrl_tcb1_tiob0>;
};
};
+
+&tcb0 {
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+};
+
+&ebi {
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+};
+
+&macb0 {
+ phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_macb_rmii
+ &pinctrl_macb_rmii_mii_alt>;
+ status = "okay";
+};
+
+&usart3 {
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&watchdog {
+ timeout-sec = <15>;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ status = "okay";
+};
+
+&usb0 {
+ num-ports = <1>;
+ status = "okay";
+};
+
+&i2c_gpio0 {
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/at91-kizboxmini-base.dts
new file mode 100644
index 000000000000..81c29ca5cc1b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ * Author: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox Mini";
+ compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+ "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index cb22f5fb055f..fddf267b2d17 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -1,17 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0
/*
* at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
*
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ * Copyright (C) 2014-2018 Overkiz SAS
+ * Author: Antoine Aubert <a.aubert@overkiz.com>
+ * Gaël Portay <g.portay@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ * Dorian Rocipon <d.rocipon@overkiz.com>
*/
-/dts-v1/;
#include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>
/ {
- model = "Overkiz Kizbox mini";
- compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
chosen {
bootargs = "ubi.mtd=ubi";
stdout-path = &dbgu;
@@ -22,24 +21,16 @@
};
clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
main_xtal {
clock-frequency = <12000000>;
};
- };
- ahb {
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- atmel,has-pmecc;
- atmel,pmecc-cap = <4>;
- atmel,pmecc-sector-size = <512>;
- nand-on-flash-bbt;
- status = "okay";
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ adc_op_clk {
+ status = "disabled";
};
};
@@ -63,17 +54,25 @@
};
};
- pwm_leds {
+ leds: pwm_leds {
compatible = "pwm-leds";
- green {
+ led_blue: pwm_blue {
+ label = "pwm:blue:user";
+ pwms = <&pwm0 2 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "none";
+ status = "disabled";
+ };
+
+ led_green: pwm_green {
label = "pwm:green:user";
pwms = <&pwm0 0 10000000 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
- red {
+ led_red: pwm_red {
label = "pwm:red:user";
pwms = <&pwm0 1 10000000 0>;
max-brightness = <255>;
@@ -82,53 +81,12 @@
};
};
-&dbgu {
+&usart0 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
status = "okay";
};
-&ebi {
- pinctrl-0 = <&pinctrl_ebi_addr_nand
- &pinctrl_ebi_data_0_7>;
- pinctrl-names = "default";
- status = "okay";
-
- nand-controller {
- pinctrl-0 = <&pinctrl_nand_oe_we
- &pinctrl_nand_cs
- &pinctrl_nand_rb>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@3 {
- reg = <0x3 0x0 0x800000>;
- rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootstrap@0 {
- label = "bootstrap";
- reg = <0x0 0x20000>;
- };
-
- ubi@20000 {
- label = "ubi";
- reg = <0x20000 0x7fe0000>;
- };
- };
- };
- };
-};
-
&macb0 {
phy-mode = "rmii";
status = "okay";
@@ -137,26 +95,70 @@
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_pwm0_1
- &pinctrl_pwm0_pwm1_1>;
+ &pinctrl_pwm0_pwm1_1
+ &pinctrl_pwm0_pwm2_1>;
status = "okay";
};
-&tcb0 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>;
- };
+&dbgu {
+ status = "okay";
+};
- timer@1 {
- compatible = "atmel,tcb-timer";
- reg = <1>;
- };
+&watchdog {
+ status = "okay";
};
-&usart0 {
+&adc0 {
+ status = "disabled";
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&ebi {
+ pinctrl-0 = <&pinctrl_ebi_addr_nand
+ &pinctrl_ebi_data_0_7>;
+ pinctrl-names = "default";
status = "okay";
};
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_nand_oe_we
+ &pinctrl_nand_cs
+ &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+};
+
&usb0 {
num-ports = <1>;
status = "okay";
@@ -166,6 +168,3 @@
status = "okay";
};
-&watchdog {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
new file mode 100644
index 000000000000..c07d3076a9bc
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ * Author: Mickael Gardet <m.gardet@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox Mini Mother Board";
+ compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+ "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+ num-ports = <2>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&led_blue {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
new file mode 100644
index 000000000000..ab50f4d22387
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ * Author: Mickael Gardet <m.gardet@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox Mini RailDIN";
+ compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+ "atmel,at91sam9x5", "atmel,at91sam9";
+
+ clocks {
+ adc_op_clk {
+ status = "okay";
+ };
+ };
+};
+
+&pinctrl {
+ adc0 {
+ pinctrl_adc0_ad5: adc0_ad5-0 {
+ /* pull-up disable */
+ atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+};
+
+&usart0 {
+ status = "disabled";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&led_blue {
+ status = "okay";
+};
+
+&adc0 {
+ atmel,adc-vref = <2500>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_ad5>;
+ atmel,adc-channels-used = <0x0020>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index f245944bd5d7..4f123477e631 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -8,7 +8,6 @@
*/
/dts-v1/;
#include "at91-linea.dtsi"
-#include "sama5d3_lcd.dtsi"
#include "at91-natte.dtsi"
/ {
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
new file mode 100644
index 000000000000..9f30132d7d7b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+
+/ {
+ model = "Microchip SAM9X60-EK";
+ compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ regulators: regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_1v8: fixed-regulator-vdd_1v8@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ vdd_1v5: fixed-regulator-vdd_1v5@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD1_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD2_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+ status = "okay";
+
+ sw1 {
+ label = "SW1";
+ gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+ linux,code=<0x104>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay"; /* Conflict with pwm0. */
+
+ red {
+ label = "red";
+ gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ green {
+ label = "green";
+ gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue {
+ label = "blue";
+ gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&adc {
+ vddana-supply = <&vdd1_3v3>;
+ vref-supply = <&vdd1_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+ status = "okay";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ status = "okay";
+};
+
+&classd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_classd_default>;
+ atmel,pwm-type = "diff";
+ atmel,non-overlap-time = <10>;
+ status = "okay";
+};
+
+&dbgu {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+ status = "okay";
+
+ nand_controller: nand-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0xc0000>;
+ };
+
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
+ label = "U-Boot Env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+ };
+ };
+};
+
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c0: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ atmel,fifo-size = <16>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+
+ eeprom@53 {
+ compatible = "atmel,24c32";
+ reg = <0x53>;
+ pagesize = <16>;
+ size = <128>;
+ status = "okay";
+ };
+ };
+};
+
+&flx4 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "disabled";
+
+ spi0: spi@400 {
+ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ clock-names = "spi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
+
+&flx5 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart1: serial@200 {
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(10))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(11))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ clock-names = "usart";
+ pinctrl-0 = <&pinctrl_flx5_default>;
+ pinctrl-names = "default";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+};
+
+&flx6 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c1: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx6_default>;
+ atmel,fifo-size = <16>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+
+ gpio_exp: mcp23008@20 {
+ compatible = "microchip,mcp23008";
+ reg = <0x20>;
+ };
+ };
+};
+
+&i2s {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_default>;
+ #sound-dai-cells = <0>;
+ status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ };
+};
+
+&pinctrl {
+ atmel,mux-mask = <
+ /* A B C */
+ 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */
+ 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */
+ 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */
+ 0x003FFFFF 0x003F8000 0x00000000 /* pioD */
+ >;
+
+ adc {
+ pinctrl_adc_default: adc_default {
+ atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adtrg_default: adtrg_default {
+ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ i2s {
+ pinctrl_i2s_default: i2s {
+ atmel,pins =
+ <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SCK */
+ AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SWS */
+ AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SDIN */
+ AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SDOUT */
+ AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* I2SMCK */
+ };
+ };
+
+ qspi {
+ pinctrl_qspi: qspi {
+ atmel,pins =
+ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+ AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+ };
+
+ nand {
+ pinctrl_nand_oe_we: nand-oe-we-0 {
+ atmel,pins =
+ <AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_nand_rb: nand-rb-0 {
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_nand_cs: nand-cs-0 {
+ atmel,pins =
+ <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ ebi {
+ pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ebi_addr_nand: ebi-addr-0 {
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+ };
+
+ flexcom {
+ pinctrl_flx0_default: flx0_twi {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_flx4_default: flx4_spi {
+ atmel,pins =
+ <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_flx5_default: flx_uart {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+ AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_flx6_default: flx6_twi {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ classd {
+ pinctrl_classd_default: classd {
+ atmel,pins =
+ <AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+ AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+ AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+ AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0 */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX0 */
+ AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN /* Enable CAN0 mux */
+ AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1 RXD1 */
+ AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX1 TXD1 */
+ AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN /* Enable CAN1 mux */
+ AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_rmii: macb0_rmii-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
+ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_0: pwm0_0 {
+ atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_1: pwm0_1 {
+ atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_2: pwm0_2 {
+ atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_3: pwm0_3 {
+ atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ sdmmc0 {
+ pinctrl_sdmmc0_default: sdmmc0 {
+ atmel,pins =
+ <AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA17 CK periph A with pullup */
+ AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA16 CMD periph A with pullup */
+ AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA15 DAT0 periph A */
+ AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA18 DAT1 periph A with pullup */
+ AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */
+ AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */
+ };
+ };
+
+ gpio_keys {
+ pinctrl_key_gpio_default: pinctrl_key_gpio {
+ atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+}; /* pinctrl */
+
+&pmc {
+ atmel,osc-bypass;
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+ status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ status = "okay";
+ cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+ disable-wp;
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay"; /* Conflict with i2s. */
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ at91bootstrap@0 {
+ label = "qspi: at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "qspi: bootloader";
+ reg = <0x40000 0xc0000>;
+ };
+
+ bootloaderenvred@100000 {
+ label = "qspi: bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
+ label = "qspi: bootloader env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "qspi: device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "qspi: kernel";
+ reg = <0x200000 0x600000>;
+ };
+ };
+};
+
+&shutdown_controller {
+ atmel,shdwc-debouncer = <976>;
+ status = "okay";
+
+ input@0 {
+ reg = <0>;
+ };
+};
+
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioD 15 GPIO_ACTIVE_HIGH
+ &pioD 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 7788d5db65c2..6281590150c8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -24,6 +24,10 @@
};
ahb {
+ sdmmc0: sdio-host@a0000000 {
+ microchip,sdcal-inverted;
+ };
+
apb {
qspi1: spi@f0024000 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index fca5716ce44f..b0853bf7901c 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -131,6 +131,9 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <0>, <0>;
dma-names = "tx", "rx";
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
@@ -246,6 +249,9 @@
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 000000000000..db3e2239eee8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+ model = "Microchip SAMA5D27 WLSOM1";
+ compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&flx1 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+ uart6: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(13))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(14))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+ clock-names = "usart";
+ pinctrl-0 = <&pinctrl_flx1_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&i2c1 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ status = "okay";
+
+ mcp16502@5b {
+ compatible = "microchip,mcp16502";
+ reg = <0x5b>;
+ status = "okay";
+ lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+ regulators {
+ vdd_3v3: VDD_IO {
+ regulator-name = "VDD_IO";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ vddio_ddr: VDD_DDR {
+ regulator-name = "VDD_DDR";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1200000>;
+ regulator-changeable-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1200000>;
+ regulator-changeable-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ vdd_core: VDD_CORE {
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ vdd_ddr: VDD_OTHER {
+ regulator-name = "VDD_OTHER";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ regulator-changeable-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ regulator-changeable-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&macb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_default>;
+ phy-mode = "rmii";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ };
+};
+
+&pmc {
+ atmel,osc-bypass;
+};
+
+&qspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi1_default>;
+ status = "disabled";
+
+ qspi1_flash: spi_flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ m25p,fast-read;
+ status = "disabled";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0xc0000>;
+ };
+
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
+ label = "bootloader env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+ };
+};
+
+&pioA {
+ pinctrl_flx1_default: flx1_usart_default {
+ pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+ <PIN_PA23__FLEXCOM1_IO1>,
+ <PIN_PA25__FLEXCOM1_IO3>,
+ <PIN_PA26__FLEXCOM1_IO4>;
+ bias-disable;
+ };
+
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_i2c1_default: i2c1_default {
+ pinmux = <PIN_PD19__TWD1>,
+ <PIN_PD20__TWCK1>;
+ bias-disable;
+ };
+
+ pinctrl_macb0_default: macb0_default {
+ pinmux = <PIN_PB14__GTXCK>,
+ <PIN_PB15__GTXEN>,
+ <PIN_PB16__GRXDV>,
+ <PIN_PB17__GRXER>,
+ <PIN_PB18__GRX0>,
+ <PIN_PB19__GRX1>,
+ <PIN_PB20__GTX0>,
+ <PIN_PB21__GTX1>,
+ <PIN_PB22__GMDC>,
+ <PIN_PB23__GMDIO>;
+ bias-disable;
+ };
+
+ pinctrl_macb0_phy_irq: macb0_phy_irq {
+ pinmux = <PIN_PB24__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_qspi1_default: qspi1_default {
+ pinmux = <PIN_PB5__QSPI1_SCK>,
+ <PIN_PB6__QSPI1_CS>,
+ <PIN_PB7__QSPI1_IO0>,
+ <PIN_PB8__QSPI1_IO1>,
+ <PIN_PB9__QSPI1_IO2>,
+ <PIN_PB10__QSPI1_IO3>;
+ bias-pull-up;
+ };
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 000000000000..0b9fa2942dff
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+
+/ {
+ model = "Microchip SAMA5D27 WLSOM1 EK";
+ compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+ aliases {
+ serial0 = &uart0; /* DBGU */
+ serial1 = &uart6; /* BT */
+ serial2 = &uart5; /* mikro BUS 2 */
+ serial3 = &uart3; /* mikro BUS 1 */
+ i2c1 = &i2c1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+ status = "okay";
+
+ sw4 {
+ label = "USER BUTTON";
+ gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_gpio_default>;
+ status = "okay";
+
+ red {
+ label = "red";
+ gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+ };
+
+ green {
+ label = "green";
+ gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue {
+ label = "blue";
+ gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&adc {
+ vddana-supply = <&vdd_3v3>;
+ vref-supply = <&vdd_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc_default>;
+ status = "okay";
+};
+
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart5: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(11))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(12))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+ clock-names = "usart";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ pinctrl-names = "default";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+};
+
+&flx1 {
+ status = "okay";
+
+ uart6: serial@200 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+};
+
+&macb0 {
+ status = "okay";
+};
+
+&pioA {
+ /*
+ * There is no real pinmux for ADC, if the pin
+ * is not requested by another peripheral then
+ * the muxing is done when channel is enabled.
+ * Requesting pins for ADC is GPIO is
+ * encouraged to prevent conflicts and to
+ * disable bias in order to be in the same
+ * state when the pin is not muxed to the adc.
+ */
+ pinctrl_adc_default: adc_default {
+ pinmux = <PIN_PD25__GPIO>,
+ <PIN_PD26__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_flx0_default: flx0_usart_default {
+ pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+ <PIN_PB29__FLEXCOM0_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_key_gpio_default: key_gpio_default {
+ pinmux = <PIN_PB2__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PA6__GPIO>,
+ <PIN_PA7__GPIO>,
+ <PIN_PA8__GPIO>;
+ bias-pull-down;
+ };
+
+ pinctrl_sdmmc0_default: sdmmc0_default {
+ cmd_data {
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
+ <PIN_PA2__SDMMC0_DAT0>,
+ <PIN_PA3__SDMMC0_DAT1>,
+ <PIN_PA4__SDMMC0_DAT2>,
+ <PIN_PA5__SDMMC0_DAT3>;
+ bias-disable;
+ };
+
+ ck_cd_vddsel {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA11__SDMMC0_VDDSEL>,
+ <PIN_PA12__SDMMC0_WP>,
+ <PIN_PA13__SDMMC0_CD>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart0_default: uart0_default {
+ pinmux = <PIN_PB26__URXD0>,
+ <PIN_PB27__UTXD0>;
+ bias-disable;
+ };
+
+ pinctrl_uart3_default: uart3_default {
+ pinmux = <PIN_PB11__URXD3>,
+ <PIN_PB12__UTXD3>;
+ bias-disable;
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ pinmux = <PIN_PA31__PWML0>,
+ <PIN_PA30__PWMH0>;
+ bias-disable;
+ };
+
+ pinctrl_usb_default: usb_default {
+ pinmux = <PIN_PA10__GPIO>;
+ bias-disable;
+ };
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default>;
+ status = "okay";
+};
+
+&qspi1 {
+ status = "okay";
+
+ qspi1_flash: spi_flash@0 {
+ status = "okay";
+ };
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ mmc-ddr-3_3v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ status = "okay";
+};
+
+&shutdown_controller {
+ atmel,shdwc-debouncer = <976>;
+ atmel,wakeup-rtc-timer;
+
+ input@0 {
+ reg = <0>;
+ atmel,wakeup-type = "low";
+ };
+};
+
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_default>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+ 0
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+};
+
+&usb2 {
+ phy_type = "hsic";
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts
new file mode 100644
index 000000000000..106f23ba4a3b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-smartkiz.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ * Author: Mickael Gardet <m.gardet@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ * Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+ model = "Overkiz SmartKiz";
+ compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+ "atmel,at91sam9x5", "atmel,at91sam9";
+
+ clocks {
+ adc_op_clk {
+ status = "okay";
+ };
+ };
+
+ aliases {
+ serial5 = &uart0;
+ };
+
+ pio_keys {
+ hk_reset {
+ label = "HK_RESET";
+ gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_rf {
+ label = "POWER_RF";
+ gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_wifi {
+ label = "POWER_WIFI";
+ gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+ AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ adc0 {
+ pinctrl_adc0_ad0: adc0_ad0-0 {
+ /* pull-up disable */
+ atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad5: adc0_ad5-0 {
+ /* pull-up disable */
+ atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad6: adc0_ad6-0 {
+ /* pull-up disable */
+ atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad11: adc0_ad11-0 {
+ /* pull-up disable */
+ atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+};
+
+&i2c1 {
+ dmas = <0>, <0>;
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "disabled";
+};
+
+&macb0 {
+ status = "disabled";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&leds {
+ blue {
+ status = "okay";
+ };
+};
+
+&adc0 {
+ atmel,adc-vref = <2500>;
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad11
+ >;
+ atmel,adc-channels-used = <0x0861>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index dee9c0c8a096..6afbb48e7ff0 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -187,7 +187,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -221,7 +221,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -239,7 +239,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -257,7 +257,7 @@
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
- <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -275,7 +275,7 @@
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
- <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+ <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
};
};
@@ -283,7 +283,7 @@
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
- <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
};
@@ -738,7 +738,7 @@
status = "disabled";
};
- watchdog@fffffd40 {
+ watchdog: watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -793,7 +793,7 @@
};
};
- i2c-gpio-0 {
+ i2c_gpio0: i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
&pioA 24 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index dba025a98527..5ed3d745ac86 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -329,7 +329,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -347,7 +347,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -365,7 +365,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 99678abdda93..5c990cfae254 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -183,7 +183,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -201,7 +201,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -219,7 +219,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 691c95ea6175..fd179097a4bf 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -556,7 +556,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -574,7 +574,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -592,7 +592,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -610,7 +610,7 @@
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 8643b7151565..ea024e4b6e09 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -682,7 +682,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -721,7 +721,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -744,7 +744,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -767,7 +767,7 @@
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
- <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 8eedd6eb409b..d1e684d0acfd 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,26 +12,6 @@
interrupt-parent = <&gicv2>;
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges;
-
- /*
- * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
- * that's not good enough for the BCM2711 as some devices can
- * only address the lower 1G of memory (ZONE_DMA).
- */
- linux,cma {
- compatible = "shared-dma-pool";
- size = <0x2000000>; /* 32MB */
- alloc-ranges = <0x0 0x00000000 0x40000000>;
- reusable;
- linux,cma-default;
- };
- };
-
-
soc {
/*
* Defined ranges:
@@ -123,10 +103,8 @@
};
rng@7e104000 {
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-
- /* RNG is incompatible with brcm,bcm2835-rng */
- status = "disabled";
+ compatible = "brcm,bcm2711-rng200";
+ reg = <0x7e104000 0x28>;
};
uart2: serial@7e201400 {
@@ -342,7 +320,36 @@
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>;
+ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
+ <0x6 0x00000000 0x6 0x00000000 0x40000000>;
+
+ pcie0: pcie@7d500000 {
+ compatible = "brcm,bcm2711-pcie";
+ reg = <0x0 0x7d500000 0x9310>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+ IRQ_TYPE_LEVEL_HIGH>;
+ msi-controller;
+ msi-parent = <&pcie0>;
+
+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+ 0x0 0x04000000>;
+ /*
+ * The wrapper around the PCIe block has a bug
+ * preventing it from accessing beyond the first 3GB of
+ * memory.
+ */
+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+ 0x0 0xc0000000>;
+ brcm,enable-ssc;
+ };
genet: ethernet@7d580000 {
compatible = "brcm,bcm2711-genet-v5";
@@ -840,6 +847,19 @@
};
};
+&rmem {
+ #address-cells = <2>;
+};
+
+&cma {
+ /*
+ * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+ * that's not good enough for the BCM2711 as some devices can
+ * only address the lower 1G of memory (ZONE_DMA).
+ */
+ alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
&i2c0 {
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index fe1ab40c7f22..2b1d9d4c0cde 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -70,6 +70,12 @@
system-power-controller;
};
+ rng@7e104000 {
+ compatible = "brcm,bcm2835-rng";
+ reg = <0x7e104000 0x10>;
+ interrupts = <2 29>;
+ };
+
pixelvalve@7e206000 {
compatible = "brcm,bcm2835-pixelvalve0";
reg = <0x7e206000 0x100>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 839491628e87..e1abe8c730ce 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -30,6 +30,19 @@
stdout-path = "serial0:115200n8";
};
+ rmem: reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cma: linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x4000000>; /* 64MB */
+ reusable;
+ linux,cma-default;
+ };
+ };
+
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
@@ -84,12 +97,6 @@
<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
};
- rng@7e104000 {
- compatible = "brcm,bcm2835-rng";
- reg = <0x7e104000 0x10>;
- interrupts = <2 29>;
- };
-
mailbox: mailbox@7e00b880 {
compatible = "brcm,bcm2835-mbox";
reg = <0x7e00b880 0x40>;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a2c9de35ddfb..536fb24f38bb 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -55,18 +55,9 @@
priority = <200>;
};
- /* Hardware I2C block cannot do more than 63 bytes per transfer,
- * which would prevent reading from a SFP's EEPROM (256 byte).
- */
- i2c1: i2c {
- compatible = "i2c-gpio";
- sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- };
-
sfp: sfp {
compatible = "sff,sfp";
- i2c-bus = <&i2c1>;
+ i2c-bus = <&i2c0>;
mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
@@ -74,6 +65,10 @@
};
};
+&i2c0 {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/dm3725.dtsi
new file mode 100644
index 000000000000..d24e906a14b1
--- /dev/null
+++ b/arch/arm/boot/dts/dm3725.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&sgx_module {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 7e7aa101d8a4..c1740868042a 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -186,7 +186,6 @@
target-module@56000 { /* 0x4a056000, ap 9 02.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "dma_system";
reg = <0x56000 0x4>,
<0x5602c 0x4>,
<0x56028 0x4>;
@@ -212,7 +211,7 @@
ranges = <0x0 0x56000 0x1000>;
sdma: dma-controller@0 {
- compatible = "ti,omap4430-sdma";
+ compatible = "ti,omap4430-sdma", "ti,omap-sdma";
reg = <0x0 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@@ -234,7 +233,6 @@
target-module@80000 { /* 0x4a080000, ap 13 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "ocp2scp1";
reg = <0x80000 0x4>,
<0x80010 0x4>,
<0x80014 0x4>;
@@ -302,7 +300,6 @@
target-module@90000 { /* 0x4a090000, ap 59 42.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "ocp2scp3";
reg = <0x90000 0x4>,
<0x90010 0x4>,
<0x90014 0x4>;
@@ -394,7 +391,6 @@
target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_mpu";
reg = <0xd9038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -414,7 +410,6 @@
target-module@dd000 { /* 0x4a0dd000, ap 19 18.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_core";
reg = <0xdd038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -471,7 +466,6 @@
target-module@f6000 { /* 0x4a0f6000, ap 25 78.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spinlock";
reg = <0xf6000 0x4>,
<0xf6010 0x4>,
<0xf6014 0x4>;
@@ -1233,7 +1227,6 @@
target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer9";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
@@ -1748,7 +1741,6 @@
target-module@78000 { /* 0x48078000, ap 39 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "elm";
reg = <0x78000 0x4>,
<0x78010 0x4>,
<0x78014 0x4>;
@@ -1842,7 +1834,6 @@
target-module@86000 { /* 0x48086000, ap 41 5e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer10";
reg = <0x86000 0x4>,
<0x86010 0x4>;
reg-names = "rev", "sysc";
@@ -1870,7 +1861,6 @@
target-module@88000 { /* 0x48088000, ap 43 66.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer11";
reg = <0x88000 0x4>,
<0x88010 0x4>;
reg-names = "rev", "sysc";
@@ -2044,6 +2034,37 @@
<0x00001000 0x000a5000 0x00001000>;
};
+ des_target: target-module@a5000 { /* 0x480a5000 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0xa5030 0x4>,
+ <0xa5034 0x4>,
+ <0xa5038 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xa5000 0x00001000>;
+
+ des: des@0 {
+ compatible = "ti,omap4-des";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */
compatible = "ti,sysc";
status = "disabled";
@@ -2490,7 +2511,6 @@
target-module@3e000 { /* 0x4843e000, ap 25 30.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss0";
reg = <0x3e000 0x4>,
<0x3e004 0x4>;
reg-names = "rev", "sysc";
@@ -2537,7 +2557,6 @@
target-module@40000 { /* 0x48440000, ap 27 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss1";
reg = <0x40000 0x4>,
<0x40004 0x4>;
reg-names = "rev", "sysc";
@@ -2584,7 +2603,6 @@
target-module@42000 { /* 0x48442000, ap 29 20.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "epwmss2";
reg = <0x42000 0x4>,
<0x42004 0x4>;
reg-names = "rev", "sysc";
@@ -3326,7 +3344,6 @@
target-module@20000 { /* 0x48820000, ap 5 08.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer5";
reg = <0x20000 0x4>,
<0x20010 0x4>;
reg-names = "rev", "sysc";
@@ -3354,7 +3371,6 @@
target-module@22000 { /* 0x48822000, ap 7 24.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer6";
reg = <0x22000 0x4>,
<0x22010 0x4>;
reg-names = "rev", "sysc";
@@ -3382,7 +3398,6 @@
target-module@24000 { /* 0x48824000, ap 9 26.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer7";
reg = <0x24000 0x4>,
<0x24010 0x4>;
reg-names = "rev", "sysc";
@@ -3410,7 +3425,6 @@
target-module@26000 { /* 0x48826000, ap 11 0c.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer8";
reg = <0x26000 0x4>,
<0x26010 0x4>;
reg-names = "rev", "sysc";
@@ -3438,7 +3452,6 @@
target-module@28000 { /* 0x48828000, ap 13 16.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer13";
reg = <0x28000 0x4>,
<0x28010 0x4>;
reg-names = "rev", "sysc";
@@ -3466,7 +3479,6 @@
target-module@2a000 { /* 0x4882a000, ap 15 10.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer14";
reg = <0x2a000 0x4>,
<0x2a010 0x4>;
reg-names = "rev", "sysc";
@@ -3494,7 +3506,6 @@
target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer15";
reg = <0x2c000 0x4>,
<0x2c010 0x4>;
reg-names = "rev", "sysc";
@@ -3522,7 +3533,6 @@
target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer16";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
reg-names = "rev", "sysc";
@@ -4422,7 +4432,6 @@
target-module@0 { /* 0x4ae20000, ap 19 08.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer12";
reg = <0x0 0x4>,
<0x10 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 73e5011f531a..40ac514702ac 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -377,44 +377,120 @@
ti,hwmods = "dmm";
};
- mmu0_dsp1: mmu@40d01000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d01000 0x100>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu0_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x0>;
- status = "disabled";
+ target-module@40d01000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d01000 0x4>,
+ <0x40d01010 0x4>,
+ <0x40d01014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d01000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ };
};
- mmu1_dsp1: mmu@40d02000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d02000 0x100>;
- interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu1_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x1>;
- status = "disabled";
+ target-module@40d02000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d02000 0x4>,
+ <0x40d02010 0x4>,
+ <0x40d02014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d02000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ };
};
- mmu_ipu1: mmu@58882000 {
- compatible = "ti,dra7-iommu";
- reg = <0x58882000 0x100>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu1";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
+ target-module@58882000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58882000 0x4>,
+ <0x58882010 0x4>,
+ <0x58882014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_ipu 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58882000 0x100>;
+
+ mmu_ipu1: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
- mmu_ipu2: mmu@55082000 {
- compatible = "ti,dra7-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu2";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55082000 0x100>;
+
+ mmu_ipu2: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
abb_mpu: regulator-abb-mpu {
@@ -652,48 +728,96 @@
};
};
- aes1: aes@4b500000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes1";
- reg = <0x4b500000 0xa0>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
- dma-names = "tx", "rx";
- clocks = <&l3_iclk_div>;
- clock-names = "fck";
- };
-
- aes2: aes@4b700000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes2";
- reg = <0x4b700000 0xa0>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
- dma-names = "tx", "rx";
- clocks = <&l3_iclk_div>;
+ aes1_target: target-module@4b500000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b500080 0x4>,
+ <0x4b500084 0x4>,
+ <0x4b500088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b500000 0x1000>;
+
+ aes1: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
};
- des: des@480a5000 {
- compatible = "ti,omap4-des";
- ti,hwmods = "des";
- reg = <0x480a5000 0xa0>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
- dma-names = "tx", "rx";
- clocks = <&l3_iclk_div>;
+ aes2_target: target-module@4b700000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b700080 0x4>,
+ <0x4b700084 0x4>,
+ <0x4b700088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b700000 0x1000>;
+
+ aes2: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
};
- sham: sham@53100000 {
- compatible = "ti,omap5-sham";
- ti,hwmods = "sham";
- reg = <0x4b101000 0x300>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 119 0>;
- dma-names = "rx";
- clocks = <&l3_iclk_div>;
+ sham_target: target-module@4b101000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x4b101100 0x4>,
+ <0x4b101110 0x4>,
+ <0x4b101114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b101000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap5-sham";
+ reg = <0 0x300>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 119 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
};
opp_supply_mpu: opp-supply@4a003b20 {
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index d1b5b76bc5a8..c5abc436ca1f 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -66,24 +66,63 @@
};
};
- mmu0_dsp2: mmu@41501000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x41501000 0x100>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu0_dsp2";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp2_system 0x0>;
- status = "disabled";
+ target-module@41501000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x41501000 0x4>,
+ <0x41501010 0x4>,
+ <0x41501014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp2 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x41501000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp2: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+ };
};
- mmu1_dsp2: mmu@41502000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x41502000 0x100>;
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu1_dsp2";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp2_system 0x1>;
- status = "disabled";
+ target-module@41502000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x41502000 0x4>,
+ <0x41502010 0x4>,
+ <0x41502014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+
+ clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp2 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x41502000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp2: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..86a3e79909a8 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -13,6 +13,13 @@
model = "TI DRA762 EVM";
compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
+ aliases {
+ display0 = &hdmi0;
+
+ sound0 = &sound0;
+ sound1 = &hdmi;
+ };
+
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
@@ -116,6 +123,48 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>, /* gpio7_30, CT CP HPD */
+ <&gpio7 31 GPIO_ACTIVE_HIGH>, /* gpio7_31, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
};
&i2c1 {
@@ -411,6 +460,23 @@
phy-supply = <&ldo3_reg>;
};
+&dss {
+ status = "ok";
+ vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+ status = "ok";
+
+ vdda-supply = <&ldo1_reg>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
+
&qspi {
spi-max-frequency = <96000000>;
m25p80@0 {
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 5a2c5320437d..ce50c4dc6f2a 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -48,7 +48,8 @@
};
};
- memory {
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index b016b0b68306..044e5da64a76 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -145,12 +145,12 @@
#size-cells = <1>;
ranges = <0 0x02020000 0x40000>;
- smp-sysram@0 {
+ smp-sram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
- smp-sysram@3f000 {
+ smp-sram@3f000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x3f000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 09d3d54d09ff..a1bdf7830a87 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -590,16 +590,16 @@
};
&sysram {
- smp-sysram@0 {
+ smp-sram@0 {
status = "disabled";
};
- smp-sysram@5000 {
+ smp-sram@5000 {
compatible = "samsung,exynos4210-sysram";
reg = <0x5000 0x1000>;
};
- smp-sysram@1f000 {
+ smp-sram@1f000 {
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 554819ae1446..b4466232f0c1 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -79,12 +79,12 @@
#size-cells = <1>;
ranges = <0 0x02020000 0x20000>;
- smp-sysram@0 {
+ smp-sram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
- smp-sysram@1f000 {
+ smp-sram@1f000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x1f000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index ce87d2ff27aa..31719c079d67 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -168,3 +168,8 @@
vdda-supply = <&ldo17_reg>;
status = "okay";
};
+
+&touchkey_reg {
+ gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 83be3a797411..3023bc3b68ce 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -13,6 +13,7 @@
#include "exynos4412.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include <dt-bindings/pinctrl/samsung.h>
@@ -92,6 +93,15 @@
enable-active-high;
};
+ touchkey_reg: voltage-regulator-6 {
+ compatible = "regulator-fixed";
+ regulator-name = "LED_VDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ status = "disabled";
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -197,6 +207,25 @@
};
};
+ i2c-gpio-4 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@20 {
+ compatible = "cypress,midas-touchkey";
+ reg = <0x20>;
+ vdd-supply = <&touchkey_reg>;
+ vcc-supply = <&ldo5_reg>;
+ interrupt-parent = <&gpj0>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ linux,keycodes = <KEY_BACK KEY_MENU>;
+ };
+ };
+
i2c-mhl {
compatible = "i2c-gpio";
gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index fe2bfd76cc4e..98cd1284cd90 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -73,3 +73,8 @@
vdda-supply = <&cam_vdda_reg>;
status = "okay";
};
+
+&touchkey_reg {
+ gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ea55f377d17c..9c39e82e4ecb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -267,7 +267,7 @@
intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
initial-mode = <1>;
};
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 01f37b5ac9c4..3a91de8a8082 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -66,6 +66,31 @@
clock-frequency = <24000000>;
};
};
+
+ panel {
+ compatible = "innolux,at070tn92";
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&lcdc_output>;
+ };
+ };
+ };
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@3 {
+ reg = <3>;
+ lcdc_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
};
&rtc {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 5022aa574b26..48868947373e 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -195,12 +195,12 @@
#size-cells = <1>;
ranges = <0 0x02020000 0x40000>;
- smp-sysram@0 {
+ smp-sram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
- smp-sysram@2f000 {
+ smp-sram@2f000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x2f000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 4801ca759feb..22eb951c614c 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -36,7 +36,7 @@
ranges;
chipid: chipid@10000000 {
- compatible = "samsung,exynos4210-chipid", "syscon";
+ compatible = "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d6c85efdb465..f8ebc620f42d 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -15,7 +15,7 @@
#include "exynos5250.dtsi"
/ {
- model = "Insignal Arndale evaluation board based on EXYNOS5250";
+ model = "Insignal Arndale evaluation board based on Exynos5250";
compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
memory@40000000 {
@@ -154,7 +154,7 @@
compatible = "smsc,usb3503a";
reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 6dc96948a9cc..5c42df024adf 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG SMDK5250 board device tree source
+ * Samsung SMDK5250 board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -12,7 +12,7 @@
#include "exynos5250.dtsi"
/ {
- model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+ model = "Samsung SMDK5250 board based on Exynos5250";
compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
aliases {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e1f0215e3985..b6135af7ef39 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1,16 +1,16 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS5250 SoC device tree source
+ * Samsung Exynos5250 SoC device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
+ * Samsung Exynos5250 SoC device nodes are listed in this file.
+ * Exynos5250 based board files can include this file and provide
* values for board specfic bindings.
*
* Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
* additional nodes can be added to this file.
*/
@@ -171,12 +171,12 @@
#size-cells = <1>;
ranges = <0 0x02020000 0x30000>;
- smp-sysram@0 {
+ smp-sram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
- smp-sysram@2f000 {
+ smp-sram@2f000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x2f000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 36a2b77eeb9d..0dc2ec16aa0a 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG XYREF5260 board device tree source
+ * Samsung XYREF5260 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -10,7 +10,7 @@
#include "exynos5260.dtsi"
/ {
- model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
+ model = "Samsung XYREF5260 board based on Exynos5260";
compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
memory@20000000 {
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index b0811dbbb362..154df70128f3 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS5260 SoC device tree source
+ * Samsung Exynos5260 SoC device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index e0db251e253f..4f9297ae0763 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -170,7 +170,7 @@
intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
initial-mode = <1>;
clock-names = "refclk";
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index dffa5e3ed90c..5282b5deca86 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG SMDK5410 board device tree source
+ * Samsung SMDK5410 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -10,7 +10,7 @@
#include "exynos5410.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
- model = "Samsung SMDK5410 board based on EXYNOS5410";
+ model = "Samsung SMDK5410 board based on Exynos5410";
compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
memory@40000000 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index a4b03d4c3de5..2eab80bf5f3a 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS5410 SoC device tree source
+ * Samsung Exynos5410 SoC device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
- * EXYNOS5410 based board files can include this file and provide
+ * Samsung Exynos5410 SoC device nodes are listed in this file.
+ * Exynos5410 based board files can include this file and provide
* values for board specfic bindings.
*/
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 592d7b45ecc8..ee28d30f5476 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -15,7 +15,7 @@
#include <dt-bindings/clock/samsung,s2mps11.h>
/ {
- model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
+ model = "Insignal Arndale Octa evaluation board based on Exynos5420";
compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
memory@20000000 {
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 0ee6e92a3c29..58d1c54cf925 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS5420 SoC cpu device tree source
+ * Samsung Exynos5420 SoC cpu device tree source
*
* Copyright (c) 2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 8240e5186972..e3f2afe8359a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG SMDK5420 board device tree source
+ * Samsung SMDK5420 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -12,7 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Samsung SMDK5420 board based on EXYNOS5420";
+ model = "Samsung SMDK5420 board based on Exynos5420";
compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
memory@20000000 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index d39907a41f78..b672080e7469 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS5420 SoC device tree source
+ * Samsung Exynos5420 SoC device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
+ * Samsung Exynos5420 SoC device nodes are listed in this file.
+ * Exynos5420 based board files can include this file and provide
* values for board specfic bindings.
*/
@@ -48,62 +48,62 @@
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1250000>;
+ opp-microvolt = <1250000 1250000 1500000>;
clock-latency-ns = <140000>;
};
opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
- opp-microvolt = <1212500>;
+ opp-microvolt = <1212500 1212500 1500000>;
clock-latency-ns = <140000>;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <1175000>;
+ opp-microvolt = <1175000 1175000 1500000>;
clock-latency-ns = <140000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1137500>;
+ opp-microvolt = <1137500 1137500 1500000>;
clock-latency-ns = <140000>;
};
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
- opp-microvolt = <1112500>;
+ opp-microvolt = <1112500 1112500 1500000>;
clock-latency-ns = <140000>;
};
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
- opp-microvolt = <1062500>;
+ opp-microvolt = <1062500 1062500 1500000>;
clock-latency-ns = <140000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1037500>;
+ opp-microvolt = <1037500 1037500 1500000>;
clock-latency-ns = <140000>;
};
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
- opp-microvolt = <1012500>;
+ opp-microvolt = <1012500 1012500 1500000>;
clock-latency-ns = <140000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = < 987500>;
+ opp-microvolt = < 987500 987500 1500000>;
clock-latency-ns = <140000>;
};
opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
- opp-microvolt = < 962500>;
+ opp-microvolt = < 962500 962500 1500000>;
clock-latency-ns = <140000>;
};
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = < 937500>;
+ opp-microvolt = < 937500 937500 1500000>;
clock-latency-ns = <140000>;
};
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
- opp-microvolt = < 912500>;
+ opp-microvolt = < 912500 912500 1500000>;
clock-latency-ns = <140000>;
};
};
@@ -744,6 +744,56 @@
iommus = <&sysmmu_gscl1>;
};
+ gpu: gpu@11800000 {
+ compatible = "samsung,exynos5420-mali", "arm,mali-t628";
+ reg = <0x11800000 0x5000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+
+ clocks = <&clock CLK_G3D>;
+ clock-names = "core";
+ power-domains = <&g3d_pd>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ status = "disabled";
+ #cooling-cells = <2>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-177000000 {
+ opp-hz = /bits/ 64 <177000000>;
+ opp-microvolt = <812500>;
+ };
+ opp-266000000 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-microvolt = <862500>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <912500>;
+ };
+ opp-420000000 {
+ opp-hz = /bits/ 64 <420000000>;
+ opp-microvolt = <962500>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-543000000 {
+ opp-hz = /bits/ 64 <543000000>;
+ opp-microvolt = <1037500>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+ };
+
scaler_0: scaler@12800000 {
compatible = "samsung,exynos5420-scaler";
reg = <0x12800000 0x1294>;
@@ -1042,7 +1092,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
clock-names = "bus";
- operating-points-v2 = <&bus_wcore_opp_table>;
status = "disabled";
};
@@ -1050,7 +1099,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK100_NOC>;
clock-names = "bus";
- operating-points-v2 = <&bus_noc_opp_table>;
status = "disabled";
};
@@ -1058,7 +1106,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
clock-names = "bus";
- operating-points-v2 = <&bus_fsys_apb_opp_table>;
status = "disabled";
};
@@ -1066,7 +1113,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
clock-names = "bus";
- operating-points-v2 = <&bus_fsys_apb_opp_table>;
status = "disabled";
};
@@ -1074,7 +1120,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
clock-names = "bus";
- operating-points-v2 = <&bus_fsys2_opp_table>;
status = "disabled";
};
@@ -1082,7 +1127,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK333>;
clock-names = "bus";
- operating-points-v2 = <&bus_mfc_opp_table>;
status = "disabled";
};
@@ -1090,7 +1134,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK266>;
clock-names = "bus";
- operating-points-v2 = <&bus_gen_opp_table>;
status = "disabled";
};
@@ -1098,7 +1141,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK66>;
clock-names = "bus";
- operating-points-v2 = <&bus_peri_opp_table>;
status = "disabled";
};
@@ -1106,7 +1148,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK333_G2D>;
clock-names = "bus";
- operating-points-v2 = <&bus_g2d_opp_table>;
status = "disabled";
};
@@ -1114,7 +1155,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK266_G2D>;
clock-names = "bus";
- operating-points-v2 = <&bus_g2d_acp_opp_table>;
status = "disabled";
};
@@ -1122,7 +1162,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
clock-names = "bus";
- operating-points-v2 = <&bus_jpeg_opp_table>;
status = "disabled";
};
@@ -1130,7 +1169,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK166>;
clock-names = "bus";
- operating-points-v2 = <&bus_jpeg_apb_opp_table>;
status = "disabled";
};
@@ -1138,7 +1176,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
clock-names = "bus";
- operating-points-v2 = <&bus_disp1_fimd_opp_table>;
status = "disabled";
};
@@ -1146,7 +1183,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
clock-names = "bus";
- operating-points-v2 = <&bus_disp1_opp_table>;
status = "disabled";
};
@@ -1154,7 +1190,6 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
clock-names = "bus";
- operating-points-v2 = <&bus_gscl_opp_table>;
status = "disabled";
};
@@ -1162,252 +1197,8 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
clock-names = "bus";
- operating-points-v2 = <&bus_mscl_opp_table>;
status = "disabled";
};
-
- bus_wcore_opp_table: opp_table2 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
- opp-microvolt = <925000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <111000000>;
- opp-microvolt = <950000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <222000000>;
- opp-microvolt = <950000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <333000000>;
- opp-microvolt = <950000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <987500>;
- };
- };
-
- bus_noc_opp_table: opp_table3 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <67000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <75000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <86000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <100000000>;
- };
- };
-
- bus_fsys_apb_opp_table: opp_table4 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <100000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
- };
- };
-
- bus_fsys2_opp_table: opp_table5 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <75000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <100000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <150000000>;
- };
- };
-
- bus_mfc_opp_table: opp_table6 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <96000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <111000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <167000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <222000000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <333000000>;
- };
- };
-
- bus_gen_opp_table: opp_table7 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <89000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <133000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <178000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <267000000>;
- };
- };
-
- bus_peri_opp_table: opp_table8 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <67000000>;
- };
- };
-
- bus_g2d_opp_table: opp_table9 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <167000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <222000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <300000000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <333000000>;
- };
- };
-
- bus_g2d_acp_opp_table: opp_table10 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <67000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <133000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <178000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <267000000>;
- };
- };
-
- bus_jpeg_opp_table: opp_table11 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <75000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <150000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <200000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <300000000>;
- };
- };
-
- bus_jpeg_apb_opp_table: opp_table12 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <111000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <134000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <167000000>;
- };
- };
-
- bus_disp1_fimd_opp_table: opp_table13 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <120000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
- };
- };
-
- bus_disp1_opp_table: opp_table14 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <120000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <300000000>;
- };
- };
-
- bus_gscl_opp_table: opp_table15 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <150000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <300000000>;
- };
- };
-
- bus_mscl_opp_table: opp_table16 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <167000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <222000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <333000000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <400000000>;
- };
- };
};
thermal-zones {
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index e4a5857c135f..1b8605cf2407 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS5422 SoC cpu device tree source
+ * Samsung Exynos5422 SoC cpu device tree source
*
* Copyright (c) 2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 059fa32d1a8f..5cf1aed20490 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -35,7 +35,264 @@
};
};
- dmc_opp_table: opp_table2 {
+ bus_wcore_opp_table: opp_table2 {
+ compatible = "operating-points-v2";
+
+ /* derived from 532MHz MPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <88700000>;
+ opp-microvolt = <925000 925000 1400000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <133000000>;
+ opp-microvolt = <950000 950000 1400000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <177400000>;
+ opp-microvolt = <950000 950000 1400000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-microvolt = <950000 950000 1400000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <532000000>;
+ opp-microvolt = <1000000 1000000 1400000>;
+ };
+ };
+
+ bus_noc_opp_table: opp_table3 {
+ compatible = "operating-points-v2";
+
+ /* derived from 666MHz CPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <66600000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <74000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <83250000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <111000000>;
+ };
+ };
+
+ bus_fsys_apb_opp_table: opp_table4 {
+ compatible = "operating-points-v2";
+
+ /* derived from 666MHz CPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <111000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ };
+
+ bus_fsys2_opp_table: opp_table5 {
+ compatible = "operating-points-v2";
+
+ /* derived from 600MHz DPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <75000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <120000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ };
+
+ bus_mfc_opp_table: opp_table6 {
+ compatible = "operating-points-v2";
+
+ /* derived from 666MHz CPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <83250000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <111000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <166500000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <333000000>;
+ };
+ };
+
+ bus_gen_opp_table: opp_table7 {
+ compatible = "operating-points-v2";
+
+ /* derived from 532MHz MPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <88700000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <133000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <178000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <266000000>;
+ };
+ };
+
+ bus_peri_opp_table: opp_table8 {
+ compatible = "operating-points-v2";
+
+ /* derived from 666MHz CPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <66600000>;
+ };
+ };
+
+ bus_g2d_opp_table: opp_table9 {
+ compatible = "operating-points-v2";
+
+ /* derived from 666MHz CPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <83250000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <111000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <166500000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <333000000>;
+ };
+ };
+
+ bus_g2d_acp_opp_table: opp_table10 {
+ compatible = "operating-points-v2";
+
+ /* derived from 532MHz MPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <66500000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <133000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <178000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <266000000>;
+ };
+ };
+
+ bus_jpeg_opp_table: opp_table11 {
+ compatible = "operating-points-v2";
+
+ /* derived from 600MHz DPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <75000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_jpeg_apb_opp_table: opp_table12 {
+ compatible = "operating-points-v2";
+
+ /* derived from 666MHz CPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <83250000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <111000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <133000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <166500000>;
+ };
+ };
+
+ bus_disp1_fimd_opp_table: opp_table13 {
+ compatible = "operating-points-v2";
+
+ /* derived from 600MHz DPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <120000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ };
+
+ bus_disp1_opp_table: opp_table14 {
+ compatible = "operating-points-v2";
+
+ /* derived from 600MHz DPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <120000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_gscl_opp_table: opp_table15 {
+ compatible = "operating-points-v2";
+
+ /* derived from 600MHz DPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_mscl_opp_table: opp_table16 {
+ compatible = "operating-points-v2";
+
+ /* derived from 666MHz CPLL */
+ opp00 {
+ opp-hz = /bits/ 64 <84000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <167000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <333000000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <666000000>;
+ };
+ };
+
+ dmc_opp_table: opp_table17 {
compatible = "operating-points-v2";
opp00 {
@@ -134,6 +391,7 @@
};
&bus_wcore {
+ operating-points-v2 = <&bus_wcore_opp_table>;
devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
<&nocp_mem1_0>, <&nocp_mem1_1>;
vdd-supply = <&buck3_reg>;
@@ -142,76 +400,91 @@
};
&bus_noc {
+ operating-points-v2 = <&bus_noc_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys_apb {
+ operating-points-v2 = <&bus_fsys_apb_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys {
+ operating-points-v2 = <&bus_fsys2_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys2 {
+ operating-points-v2 = <&bus_fsys2_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_mfc {
+ operating-points-v2 = <&bus_mfc_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_gen {
+ operating-points-v2 = <&bus_gen_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_peri {
+ operating-points-v2 = <&bus_peri_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_g2d {
+ operating-points-v2 = <&bus_g2d_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_g2d_acp {
+ operating-points-v2 = <&bus_g2d_acp_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_jpeg {
+ operating-points-v2 = <&bus_jpeg_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_jpeg_apb {
+ operating-points-v2 = <&bus_jpeg_apb_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_disp1_fimd {
+ operating-points-v2 = <&bus_disp1_fimd_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_disp1 {
+ operating-points-v2 = <&bus_disp1_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_gscl_scaler {
+ operating-points-v2 = <&bus_gscl_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_mscl {
+ operating-points-v2 = <&bus_mscl_opp_table>;
devfreq = <&bus_wcore>;
status = "okay";
};
@@ -601,6 +874,8 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&buck3_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -613,6 +888,8 @@
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&buck2_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -623,7 +900,6 @@
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
@@ -771,6 +1047,11 @@
vtmu-supply = <&ldo7_reg>;
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index d271e7548826..f163206265bb 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -72,14 +72,14 @@
*/
map1 {
trip = <&cpu0_alert1>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
@@ -116,14 +116,14 @@
};
map1 {
trip = <&cpu1_alert1>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
@@ -160,14 +160,14 @@
};
map1 {
trip = <&cpu2_alert1>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
@@ -204,14 +204,14 @@
};
map1 {
trip = <&cpu3_alert1>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 838872037493..1865a708b49f 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -107,7 +107,7 @@
/*
* When reaching cpu0_alert3, reduce CPU
* by 2 steps. On Exynos5422/5800 that would
- * be: 1600 MHz and 1100 MHz.
+ * (usually) be: 1800 MHz and 1200 MHz.
*/
map3 {
trip = <&cpu0_alert3>;
@@ -122,19 +122,19 @@
};
/*
* When reaching cpu0_alert4, reduce CPU
- * further, down to 600 MHz (12 steps for big,
- * 7 steps for LITTLE).
+ * further, down to 600 MHz (14 steps for big,
+ * 8 steps for LITTLE).
*/
- map4 {
+ cpu0_cooling_map4: map4 {
trip = <&cpu0_alert4>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
@@ -198,16 +198,16 @@
<&cpu6 0 2>,
<&cpu7 0 2>;
};
- map4 {
+ cpu1_cooling_map4: map4 {
trip = <&cpu1_alert4>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
@@ -271,16 +271,16 @@
<&cpu6 0 2>,
<&cpu7 0 2>;
};
- map4 {
+ cpu2_cooling_map4: map4 {
trip = <&cpu2_alert4>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
@@ -344,16 +344,16 @@
<&cpu6 0 2>,
<&cpu7 0 2>;
};
- map4 {
+ cpu3_cooling_map4: map4 {
trip = <&cpu3_alert4>;
- cooling-device = <&cpu0 3 7>,
- <&cpu1 3 7>,
- <&cpu2 3 7>,
- <&cpu3 3 7>,
- <&cpu4 3 12>,
- <&cpu5 3 12>,
- <&cpu6 3 12>,
- <&cpu7 3 12>;
+ cooling-device = <&cpu0 3 8>,
+ <&cpu1 3 8>,
+ <&cpu2 3 8>,
+ <&cpu3 3 8>,
+ <&cpu4 3 14>,
+ <&cpu5 3 14>,
+ <&cpu6 3 14>,
+ <&cpu7 3 14>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index a31ca2ef750f..98feecad5489 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -30,6 +30,64 @@
samsung,asv-bin = <2>;
};
+/*
+ * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
+ * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
+ * Therefore we need to update OPPs tables and thermal maps accordingly.
+ */
+&cluster_a15_opp_table {
+ /delete-node/opp-2000000000;
+ /delete-node/opp-1900000000;
+};
+
+&cluster_a7_opp_table {
+ /delete-node/opp-1400000000;
+};
+
+&cpu0_cooling_map4 {
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
+};
+
+&cpu1_cooling_map4 {
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
+};
+
+&cpu2_cooling_map4 {
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
+};
+
+&cpu3_cooling_map4 {
+ cooling-device = <&cpu0 3 7>,
+ <&cpu1 3 7>,
+ <&cpu2 3 7>,
+ <&cpu3 3 7>,
+ <&cpu4 3 12>,
+ <&cpu5 3 12>,
+ <&cpu6 3 12>,
+ <&cpu7 3 12>;
+};
+
&pwm {
/*
* PWM 0 -- fan
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index f78dee801cd9..8aa5117e58ce 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -62,12 +62,12 @@
#size-cells = <1>;
ranges = <0 0x02020000 0x54000>;
- smp-sysram@0 {
+ smp-sram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
- smp-sysram@53000 {
+ smp-sram@53000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x53000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 60ca3d685247..60ab0effe474 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -156,6 +156,15 @@
assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
+/*
+ * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
+ * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards. Thus we need to
+ * update A7 OPPs table accordingly.
+ */
+&cluster_a7_opp_table {
+ /delete-node/opp-1400000000;
+};
+
&cpu0 {
cpu-supply = <&buck2_reg>;
};
@@ -257,6 +266,8 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-coupled-with = <&buck3_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -269,6 +280,8 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-coupled-with = <&buck2_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index 16177d815ee4..dfb99ab53c3e 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS5800 SoC device tree source
+ * Samsung Exynos5800 SoC device tree source
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
+ * Samsung Exynos5800 SoC device nodes are listed in this file.
+ * Exynos5800 based board files can include this file and provide
* values for board specfic bindings.
*/
@@ -21,67 +21,87 @@
};
&cluster_a15_opp_table {
+ opp-2000000000 {
+ opp-hz = /bits/ 64 <2000000000>;
+ opp-microvolt = <1312500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1900000000 {
+ opp-hz = /bits/ 64 <1900000000>;
+ opp-microvolt = <1262500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1237500>;
+ clock-latency-ns = <140000>;
+ };
opp-1700000000 {
- opp-microvolt = <1250000>;
+ opp-microvolt = <1250000 1250000 1500000>;
};
opp-1600000000 {
- opp-microvolt = <1250000>;
+ opp-microvolt = <1250000 1250000 1500000>;
};
opp-1500000000 {
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1500000>;
};
opp-1400000000 {
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1500000>;
};
opp-1300000000 {
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1500000>;
};
opp-1200000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-1100000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-1000000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-900000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-800000000 {
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
};
opp-700000000 {
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
};
&cluster_a7_opp_table {
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1275000>;
+ clock-latency-ns = <140000>;
+ };
opp-1300000000 {
opp-microvolt = <1250000>;
};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi
index 2abc42eda7b0..a0fa65b44b0f 100644
--- a/arch/arm/boot/dts/ibm-power9-dual.dtsi
+++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi
@@ -86,7 +86,7 @@
#address-cells = <1>;
#size-cells = <0>;
- fsi_occ0: occ {
+ fsi_occ0: occ@1 {
compatible = "ibm,p9-occ";
};
};
@@ -187,7 +187,7 @@
#address-cells = <1>;
#size-cells = <0>;
- fsi_occ1: occ {
+ fsi_occ1: occ@2 {
compatible = "ibm,p9-occ";
};
};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 0fde90df2b54..3f38c2e60a74 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -165,8 +165,6 @@
};
&usbhost1 {
- phy_type = "serial";
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 05cccd12624c..fb66884d8a2f 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -304,8 +304,6 @@
};
&usbhost1 {
- phy_type = "serial";
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 9a097ef014af..40b95a290bd6 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -570,6 +570,9 @@
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
+ maximum-speed = "full-speed";
+ phy_type = "serial";
+ dr_mode = "host";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ed6a3ce874b2..552196d8a60a 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -58,29 +58,27 @@
display1: disp1 {
compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
- display-timings {
- native-mode = <&timing0>;
- timing0: dvi {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- };
- };
- port {
+ port@0 {
+ reg = <0>;
+
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp1>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ parallel_display_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ };
+ };
};
display2: disp2 {
@@ -115,6 +113,42 @@
};
};
+ dvi-connector {
+ compatible = "dvi-connector";
+ digital;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ dvi-encoder {
+ compatible = "ti,tfp410";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&parallel_display_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts
new file mode 100644
index 000000000000..3fa2822beffc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+ compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/imx6dl-gw5910.dts
new file mode 100644
index 000000000000..0d5e7e5da536
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+ compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/imx6dl-gw5912.dts
new file mode 100644
index 000000000000..5260e0142d63
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+ compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts
new file mode 100644
index 000000000000..b74e533c8e67
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts
new file mode 100644
index 000000000000..b25526ef5886
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+ compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/imx6q-gw5910.dts
new file mode 100644
index 000000000000..6aafa2fcee08
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+ compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/imx6q-gw5912.dts
new file mode 100644
index 000000000000..4dcbd943cd93
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+ compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts
new file mode 100644
index 000000000000..6f511f1665fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
index d96ae54be338..7a3d1d3e54a9 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -73,6 +73,16 @@
status = "okay";
};
+&i2c1 {
+ touchscreen@26 {
+ compatible = "ilitek,ili2117";
+ reg = <0x26>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
&ldb {
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index ff1287e6b7ce..1b5bc6b5e806 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -200,7 +200,7 @@
&hdmi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hdmi_ddc>;
+ pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
new file mode 100644
index 000000000000..0bdebddffd51
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ led0 = &led0;
+ led1 = &led1;
+ nand = &gpmi;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+ default-state = "off";
+ };
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ adc@48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <0>;
+ ti,datarate = <5>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <0>;
+ ti,datarate = <5>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <0>;
+ ti,datarate = <5>;
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
new file mode 100644
index 000000000000..be1af7482f89
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_wl: regulator-wl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wl>;
+ compatible = "regulator-fixed";
+ regulator-name = "wl";
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_bt: regulator-bt {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_bt>;
+ compatible = "regulator-fixed";
+ regulator-name = "bt";
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+
+&ecspi3 {
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ accel@19 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <13 0>;
+ interrupt-names = "INT1";
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* serial console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* Sterling-LWB Bluetooth */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* GPS */
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_5p0v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+/* Sterling-LWB SDIO WiFi */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <&reg_3p3v>;
+ non-removable;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_accel: accelmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
+ >;
+ };
+
+ pinctrl_ecspi3: escpi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_bt: regbtgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_wl: regwlgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
new file mode 100644
index 000000000000..8c57fd2f9a0b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ nand = &gpmi;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_vbus: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ accel@19 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <13 0>;
+ interrupt-names = "INT1";
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ no-1-8-v; /* firmware will remove if board revision supports */
+ status = "okay";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
+&wdog2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_accel: accelmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: escpi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
new file mode 100644
index 000000000000..635c203bd64d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ led0 = &led0;
+ led1 = &led1;
+ nand = &gpmi;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+ default-state = "off";
+ };
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
index d91d46b5898f..0fd7f2e24d9c 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET_REF>;
- phy-mode = "rmii";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 7814f1ef0804..756f3a9f1b4f 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -150,10 +150,23 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
phy-mode = "rmii";
+ phy-handle = <&eth_phy>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <4000>;
+ reset-deassert-us = <4000>;
+ };
+ };
};
&gpmi {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 6486df3e2942..978dc1c2ff1b 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
/ {
aliases {
@@ -100,6 +101,10 @@
compatible = "dlg,da9062-rtc";
};
+ da9062_onkey: onkey {
+ compatible = "dlg,da9062-onkey";
+ };
+
watchdog {
compatible = "dlg,da9062-watchdog";
};
@@ -109,6 +114,7 @@
regulator-name = "vdd_arm";
regulator-min-microvolt = <730000>;
regulator-max-microvolt = <1380000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
regulator-always-on;
};
@@ -116,6 +122,7 @@
regulator-name = "vdd_soc";
regulator-min-microvolt = <730000>;
regulator-max-microvolt = <1380000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
regulator-always-on;
};
@@ -123,6 +130,7 @@
regulator-name = "vdd_ddr3";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
regulator-always-on;
};
@@ -130,6 +138,7 @@
regulator-name = "vdd_eth";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index a2a4f33a3e3e..0075637f9b0b 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -60,18 +60,6 @@
regulator-always-on;
};
- reg_5p0v_user_usb: regulator-5p0v-user-usb {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_user_usb>;
- vin-supply = <&reg_5p0v_main>;
- regulator-name = "5V_USER_USB";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
- startup-delay-us = <1000>;
- };
-
reg_3p3v_pmic: regulator-3p3v-pmic {
compatible = "regulator-fixed";
vin-supply = <&reg_12p0v>;
@@ -331,6 +319,39 @@
};
};
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+ usb-emulation {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "usb-emulation";
+ };
+
+ usb-mode1 {
+ gpio-hog;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-mode1";
+ };
+
+ usb-pwr {
+ gpio-hog;
+ gpios = <22 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "usb-pwr-ctrl-en-n";
+ };
+
+ usb-mode2 {
+ gpio-hog;
+ gpios = <23 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-mode2";
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -592,6 +613,16 @@
status = "disabled";
};
+ reg_5p0v_user_usb: charger@32 {
+ compatible = "microchip,ucs1002";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ucs1002_pins>;
+ reg = <0x32>;
+ interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+ <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "a_det", "alert";
+ };
+
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
pinctrl-names = "default";
@@ -629,7 +660,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
@@ -642,7 +673,7 @@
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
@@ -776,6 +807,7 @@
&usbh1 {
vbus-supply = <&reg_5p0v_main>;
disable-over-current;
+ maximum-speed = "full-speed";
status = "okay";
};
@@ -936,6 +968,15 @@
>;
};
+ pinctrl_gpio3_hog: gpio3hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
@@ -983,12 +1024,6 @@
>;
};
- pinctrl_reg_user_usb: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038
- >;
- };
-
pinctrl_rmii_phy_irq: phygrp {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000
@@ -1048,6 +1083,13 @@
>;
};
+ pinctrl_ucs1002_pins: ucs1002grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059
@@ -1056,7 +1098,6 @@
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040
>;
};
@@ -1069,7 +1110,6 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040
>;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
new file mode 100644
index 000000000000..27143ea0f0f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Shine 3 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Toline Shine 3 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+ model = "Tolino Shine 3";
+ compatible = "kobo,tolino-shine3", "fsl,imx6sl";
+};
+
+&gpio_keys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 /* PWR_SW */
+ MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059 /* HALL_EN */
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79
+ MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
+ MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79
+ MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79
+ MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
+ MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
+ MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
+ MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
+ MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
+ MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
+ MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
+ MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
+ MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
+ MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
+ MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
+ MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
+ MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
+ MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
+ MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
+ MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
+ MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
+ MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
+ MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
+ MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
+ MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
+ MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
+ MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
+ MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
+ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
+ MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
+ MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79
+ MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c1_sleep: i2c1grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c2_sleep: i2c2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+ MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+ >;
+ };
+
+ pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
+ >;
+ };
+
+ pinctrl_ricoh_gpio: ricoh_gpiogrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */
+ MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
+ MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9
+ MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9
+ MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9
+ MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9
+ MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9
+ MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
+ MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
+ MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
+ MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
+ MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
+ MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
+ >;
+ };
+
+ pinctrl_wifi_power: wifi-powergrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
+ >;
+ };
+
+ pinctrl_wifi_reset: wifi-resetgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
+ >;
+ };
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+&ricoh619 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 85aa8bb98528..a1bc5bb31756 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -632,6 +632,15 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
+ pxp: pxp@20f0000 {
+ compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+ reg = <0x20f0000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_PXP>;
+ clock-names = "axi";
+ };
+
lcdif: lcd-controller@20f8000 {
compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
reg = <0x020f8000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 91a7548fdb8d..dce5dcf96c25 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -6,6 +6,7 @@
/ {
model = "Freescale i.MX6 SoloX SDB RevA Board";
+ compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx";
};
&i2c1 {
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 212144511b66..265bf4108cb6 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -327,6 +327,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
no-1-8-v;
+ broken-cd;
keep-power-in-suspend;
wakeup-source;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 6d850d997e1e..9145c536d71a 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -220,7 +220,7 @@
&iomuxc {
pinctrl_can_int: canint-grp {
fsl,pins = <
- MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0X14 /* SODIMM 73 */
+ MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */
>;
};
@@ -256,15 +256,15 @@
pinctrl_ecspi1_cs: ecspi1-cs-grp {
fsl,pins = <
- MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */
>;
};
pinctrl_ecspi1: ecspi1-grp {
fsl,pins = <
- MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0
- MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0
- MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0 /* SODIMM 90 */
>;
};
@@ -284,68 +284,68 @@
pinctrl_gpio_bl_on: gpio-bl-on-grp {
fsl,pins = <
- MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x000a0
+ MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */
>;
};
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
- MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */
- MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */
- MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */
- MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x14 /* SODIMM 135 */
- MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x14 /* SODIMM 100 */
- MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x14 /* SODIMM 102 */
- MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x14 /* SODIMM 104 */
- MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x14 /* SODIMM 186 */
+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */
+ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */
+ MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x10b0 /* SODIMM 133 */
+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x10b0 /* SODIMM 135 */
+ MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x10b0 /* SODIMM 100 */
+ MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x70a0 /* SODIMM 102 */
+ MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 /* SODIMM 104 */
+ MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x10b0 /* SODIMM 186 */
>;
};
pinctrl_gpio2: gpio2-grp { /* Camera */
fsl,pins = <
- MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x74 /* SODIMM 69 */
- MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x14 /* SODIMM 75 */
- MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x14 /* SODIMM 85 */
- MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x14 /* SODIMM 96 */
- MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x14 /* SODIMM 98 */
+ MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */
+ MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */
+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x10b0 /* SODIMM 85 */
+ MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x10b0 /* SODIMM 96 */
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x10b0 /* SODIMM 98 */
>;
};
pinctrl_gpio3: gpio3-grp { /* CAN2 */
fsl,pins = <
- MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x14 /* SODIMM 178 */
- MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x14 /* SODIMM 188 */
+ MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */
+ MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */
>;
};
pinctrl_gpio4: gpio4-grp {
fsl,pins = <
- MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x74 /* SODIMM 65 */
+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */
>;
};
pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
fsl,pins = <
- MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x74 /* SODIMM 106 */
+ MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */
>;
};
pinctrl_gpio6: gpio6-grp { /* Wifi pins */
fsl,pins = <
- MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x14 /* SODIMM 89 */
- MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x14 /* SODIMM 79 */
- MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x14 /* SODIMM 81 */
- MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x14 /* SODIMM 97 */
- MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x14 /* SODIMM 101 */
- MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x14 /* SODIMM 103 */
- MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x14 /* SODIMM 94 */
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */
+ MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 /* SODIMM 81 */
+ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 /* SODIMM 97 */
+ MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 /* SODIMM 101 */
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 /* SODIMM 103 */
+ MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0 /* SODIMM 94 */
>;
};
pinctrl_gpio7: gpio7-grp { /* CAN1 */
fsl,pins = <
- MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */
- MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */
+ MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */
+ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */
>;
};
@@ -370,15 +370,15 @@
pinctrl_i2c1: i2c1-grp {
fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */
>;
};
pinctrl_i2c1_gpio: i2c1-gpio-grp {
fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */
>;
};
@@ -398,107 +398,107 @@
pinctrl_lcdif_dat: lcdif-dat-grp {
fsl,pins = <
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079 /* SODIMM 60 */
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079 /* SODIMM 58 */
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079 /* SODIMM 78 */
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079 /* SODIMM 72 */
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079 /* SODIMM 80 */
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079 /* SODIMM 46 */
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079 /* SODIMM 62 */
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079 /* SODIMM 48 */
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079 /* SODIMM 74 */
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079 /* SODIMM 50 */
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079 /* SODIMM 52 */
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079 /* SODIMM 54 */
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079 /* SODIMM 66 */
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079 /* SODIMM 64 */
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079 /* SODIMM 57 */
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079 /* SODIMM 61 */
>;
};
pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079 /* SODIMM 68 */
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079 /* SODIMM 82 */
>;
};
pinctrl_pwm4: pwm4-grp {
fsl,pins = <
- MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079
+ MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */
>;
};
pinctrl_pwm5: pwm5-grp {
fsl,pins = <
- MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079
+ MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */
>;
};
pinctrl_pwm6: pwm6-grp {
fsl,pins = <
- MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079
+ MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */
>;
};
pinctrl_pwm7: pwm7-grp {
fsl,pins = <
- MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079
+ MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */
>;
};
pinctrl_uart1: uart1-grp {
fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1
- MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1
- MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1
+ MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */
+ MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */
+ MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1 /* SODIMM 27 */
+ MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1 /* SODIMM 25 */
>;
};
pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
fsl,pins = <
- MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b0b1 /* DCD */
- MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b0b1 /* DSR */
- MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x1b0b1 /* DTR */
- MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x1b0b1 /* RI */
+ MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */
+ MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */
+ MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */
>;
};
pinctrl_uart2: uart2-grp {
fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1
- MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1
- MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1
+ MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */
+ MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */
+ MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1 /* SODIMM 32 */
+ MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */
>;
};
pinctrl_uart5: uart5-grp {
fsl,pins = <
- MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1
- MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1
+ MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */
+ MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */
>;
};
pinctrl_usbh_reg: gpio-usbh-reg {
fsl,pins = <
- MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x1b0b1 /* SODIMM 129 USBH PEN */
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */
>;
};
pinctrl_usdhc1: usdhc1-grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 /* SODIMM 53 */
>;
};
@@ -533,7 +533,7 @@
MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059
- MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x14
+ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10
>;
};
@@ -547,23 +547,23 @@
&iomuxc_snvs {
pinctrl_snvs_gpio1: snvs-gpio1-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x14 /* SODIMM 93 */
- MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x14 /* SODIMM 95 */
- MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x74 /* SODIMM 105 */
- MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x14 /* SODIMM 131 USBH OC */
- MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x74 /* SODIMM 138 */
+ MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */
+ MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */
+ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */
>;
};
pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x74 /* SODIMM 107 */
+ MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
>;
};
pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
fsl,pins = <
- MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 /* SODIMM 127 */
+ MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */
>;
};
@@ -587,13 +587,13 @@
pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130b0
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */
>;
};
pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* CD */
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */
>;
};
@@ -605,7 +605,7 @@
pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
fsl,pins = <
- MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14
+ MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0
>;
};
};
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index 6f50ebf31a0a..e57da0d32b98 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -7,12 +7,42 @@
#include "imx7d.dtsi"
/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 50000 0>;
+ brightness-levels = <0 36 72 108 144 180 216 255>;
+ default-brightness-level = <6>;
+ };
+
/* Will be filled by the bootloader */
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>;
};
+ panel {
+ compatible = "vxt,vl050-8048nt-c01";
+ backlight = <&backlight>;
+ power-supply = <&reg_lcd_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcdreg_on>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_wlreg_on: regulator-wlreg_on {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -230,6 +260,18 @@
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
@@ -260,6 +302,8 @@
};
&pwm4 { /* Backlight */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
@@ -413,6 +457,40 @@
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x78
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x78
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x78
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14
+ >;
+ };
+
pinctrl_pwm1: pwm1 {
fsl,pins = <
MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
@@ -431,6 +509,12 @@
>;
};
+ pinctrl_pwm4: pwm4grp{
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x7f
+ >;
+ };
+
pinctrl_reg_wlreg_on: regregongrp {
fsl,pins = <
MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59
@@ -577,6 +661,12 @@
>;
};
+ pinctrl_reg_lcdreg_on: reglcdongrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
index 7ce9d8c91985..cabdaa6dc518 100644
--- a/arch/arm/boot/dts/imx7d-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts
@@ -7,6 +7,9 @@
#include "imx7d-sdb.dts"
/ {
+ model = "Freescale i.MX7 SabreSD RevA Board";
+ compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index d8acd7cc7918..92f6d0c2a74f 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -12,7 +12,7 @@
clock-frequency = <996000000>;
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
- nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cells = <&fuse_grade>;
nvmem-cell-names = "speed_grade";
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1b812f4e7453..568d7a984aa6 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -152,8 +152,7 @@
interrupt-parent = <&gpc>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>,
- <&tempmon_temp_grade>;
+ nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
};
@@ -548,11 +547,7 @@
reg = <0x3c 0x4>;
};
- tempmon_temp_grade: temp-grade@10 {
- reg = <0x10 0x4>;
- };
-
- cpu_speed_grade: speed-grade@10 {
+ fuse_grade: fuse-grade@10 {
reg = <0x10 0x4>;
};
};
@@ -658,6 +653,12 @@
reg = <1>;
power-supply = <&reg_1p0d>;
};
+
+ pgc_hsic_phy: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <2>;
+ power-supply = <&reg_1p2>;
+ };
};
};
};
@@ -1101,6 +1102,7 @@
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b30000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pgc_hsic_phy>;
clocks = <&clks IMX7D_USB_CTRL_CLK>;
fsl,usbphy = <&usbphynop3>;
fsl,usbmisc = <&usbmisc3 0>;
diff --git a/arch/arm/boot/dts/imx7ulp-com.dts b/arch/arm/boot/dts/imx7ulp-com.dts
new file mode 100644
index 000000000000..d76fea3b35c6
--- /dev/null
+++ b/arch/arm/boot/dts/imx7ulp-com.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2019 NXP
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Embedded Artists i.MX7ULP COM";
+ compatible = "ea,imx7ulp-com", "fsl,imx7ulp";
+
+ chosen {
+ stdout-path = &lpuart4;
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x4000000>;
+ };
+};
+
+&lpuart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_id>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usdhc0 {
+ assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
+ assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ non-removable;
+ bus-width = <8>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc1 {
+ pinctrl_lpuart4: lpuart4grp {
+ fsl,pins = <
+ IMX7ULP_PAD_PTC3__LPUART4_RX 0x3
+ IMX7ULP_PAD_PTC2__LPUART4_TX 0x3
+ >;
+ };
+
+ pinctrl_usbotg1_id: otg1idgrp {
+ fsl,pins = <
+ IMX7ULP_PAD_PTC13__USB0_ID 0x10003
+ >;
+ };
+
+ pinctrl_usdhc0: usdhc0grp {
+ fsl,pins = <
+ IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43
+ IMX7ULP_PAD_PTD2__SDHC0_CLK 0x10042
+ IMX7ULP_PAD_PTD3__SDHC0_D7 0x43
+ IMX7ULP_PAD_PTD4__SDHC0_D6 0x43
+ IMX7ULP_PAD_PTD5__SDHC0_D5 0x43
+ IMX7ULP_PAD_PTD6__SDHC0_D4 0x43
+ IMX7ULP_PAD_PTD7__SDHC0_D3 0x43
+ IMX7ULP_PAD_PTD8__SDHC0_D2 0x43
+ IMX7ULP_PAD_PTD9__SDHC0_D1 0x43
+ IMX7ULP_PAD_PTD10__SDHC0_D0 0x43
+ IMX7ULP_PAD_PTD11__SDHC0_DQS 0x42
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ae75a1db3d9a..ebbe1518ef8a 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -46,6 +46,49 @@
clock-frequency = <26000000>;
};
+ lcd_backlight: backlight {
+ compatible = "pwm-backlight";
+
+ pwms = <&pwm3 0 5000000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ lvds-receiver {
+ compatible = "ti,ds90cf384a", "lvds-decoder";
+ powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_receiver_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds_receiver_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
+ panel {
+ compatible = "edt,etm0700g0dh6";
+ backlight = <&lcd_backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_receiver_out>;
+ };
+ };
+ };
+
reg_1p5v: 1p5v {
compatible = "regulator-fixed";
regulator-name = "1P5V";
@@ -89,8 +132,7 @@
gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
};
@@ -120,6 +162,18 @@
status = "okay";
};
+&du {
+ status = "okay";
+};
+
+&gpio2 {
+ touch-interrupt {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_LOW>;
+ input;
+ };
+};
+
&hsusb {
status = "okay";
pinctrl-0 = <&usb0_pins>;
@@ -147,6 +201,25 @@
VDDIO-supply = <&reg_3p3v>;
VDDD-supply = <&reg_1p5v>;
};
+
+ touch: touchpanel@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&lvds_receiver_in>;
+ };
+ };
+ };
};
&pci0 {
@@ -180,6 +253,11 @@
function = "i2c2";
};
+ pwm3_pins: pwm3 {
+ groups = "pwm3";
+ function = "pwm3";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data_d";
function = "scif0";
@@ -218,6 +296,12 @@
};
};
+&pwm3 {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&rcar_sound {
pinctrl-0 = <&sound_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
index 0e99df218252..ede2e0c999b1 100644
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -39,7 +39,6 @@
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
- status = "okay";
ports {
port@0 {
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 5b7689094b70..9d8f0c2a8aba 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -203,11 +203,15 @@
/* AR8031 */
sgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
+ /* SGMII1_PHY_INT_B: connected to IRQ2, active low */
+ interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
};
/* AR8031 */
sgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
+ /* SGMII2_PHY_INT_B: connected to IRQ2, active low */
+ interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
};
/* BCM5464 quad PHY */
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2f6977ada447..0855b1fe98e0 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -216,6 +216,25 @@
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1570000 0x10000>;
+
+ extirq: interrupt-controller@1ac {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
};
crypto: crypto@1700000 {
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index c4447f6c8b2c..5d198309058a 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -282,4 +282,11 @@
};
};
};
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index 2d31b7ce3f8c..4716030a48d0 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -36,13 +36,6 @@
ranges = <0x0 0xd0000000 0x40000>;
};
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
-
clk81: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 3c534cd50ee3..eedb92526968 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -3,6 +3,7 @@
* Copyright 2014 Carlo Caione <carlo@caione.org>
*/
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8-gpio.h>
#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
@@ -129,8 +130,8 @@
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";
- opp-182150000 {
- opp-hz = /bits/ 64 <182150000>;
+ opp-182142857 {
+ opp-hz = /bits/ 64 <182142857>;
opp-microvolt = <1150000>;
};
opp-318750000 {
@@ -195,6 +196,14 @@
#size-cells = <1>;
ranges = <0x0 0xc8000000 0x8000>;
+ ddr_clkc: clock-controller@400 {
+ compatible = "amlogic,meson8-ddr-clkc";
+ reg = <0x400 0x20>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ #clock-cells = <1>;
+ };
+
dmcbus: bus@6000 {
compatible = "simple-bus";
reg = <0x6000 0x400>;
@@ -455,6 +464,8 @@
&hhi {
clkc: clock-controller {
compatible = "amlogic,meson8-clkc";
+ clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+ clock-names = "xtal", "ddr_pll";
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -529,8 +540,7 @@
&saradc {
compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
- clocks = <&clkc CLKID_XTAL>,
- <&clkc CLKID_SAR_ADC>;
+ clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
clock-names = "clkin", "core";
amlogic,hhi-sysctrl = <&hhi>;
nvmem-cells = <&temperature_calib>;
@@ -548,31 +558,31 @@
};
&timer_abcde {
- clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "pclk";
};
&uart_AO {
compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "baud", "xtal", "pclk";
};
&uart_A {
compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
clock-names = "baud", "xtal", "pclk";
};
&uart_B {
compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
clock-names = "baud", "xtal", "pclk";
};
&uart_C {
compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
clock-names = "baud", "xtal", "pclk";
};
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index bed1dfef1985..163a200d5a7b 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -377,7 +377,7 @@
status = "okay";
pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+ clocks = <&xtal>, <&xtal>;
clock-names = "clkin0", "clkin1";
};
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 6e39ad52e42d..33037ef62d0a 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -165,7 +165,7 @@
status = "okay";
pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+ clocks = <&xtal>, <&xtal>;
clock-names = "clkin0", "clkin1";
};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a24eccc354b9..a2a47804fc4a 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -340,7 +340,7 @@
status = "okay";
pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+ clocks = <&xtal>, <&xtal>;
clock-names = "clkin0", "clkin1";
};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 099bf8e711c9..e34b039b9357 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -4,6 +4,7 @@
* Author: Carlo Caione <carlo@endlessm.com>
*/
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8b-gpio.h>
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
@@ -125,8 +126,8 @@
opp-hz = /bits/ 64 <255000000>;
opp-microvolt = <1100000>;
};
- opp-364300000 {
- opp-hz = /bits/ 64 <364300000>;
+ opp-364285714 {
+ opp-hz = /bits/ 64 <364285714>;
opp-microvolt = <1100000>;
};
opp-425000000 {
@@ -172,6 +173,14 @@
#size-cells = <1>;
ranges = <0x0 0xc8000000 0x8000>;
+ ddr_clkc: clock-controller@400 {
+ compatible = "amlogic,meson8b-ddr-clkc";
+ reg = <0x400 0x20>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ #clock-cells = <1>;
+ };
+
dmcbus: bus@6000 {
compatible = "simple-bus";
reg = <0x6000 0x400>;
@@ -433,7 +442,9 @@
&hhi {
clkc: clock-controller {
- compatible = "amlogic,meson8-clkc";
+ compatible = "amlogic,meson8b-clkc";
+ clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+ clock-names = "xtal", "ddr_pll";
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -508,8 +519,7 @@
&saradc {
compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
- clocks = <&clkc CLKID_XTAL>,
- <&clkc CLKID_SAR_ADC>;
+ clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
clock-names = "clkin", "core";
amlogic,hhi-sysctrl = <&hhi>;
nvmem-cells = <&temperature_calib>;
@@ -523,31 +533,31 @@
};
&timer_abcde {
- clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "pclk";
};
&uart_AO {
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "baud", "xtal", "pclk";
};
&uart_A {
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
clock-names = "baud", "xtal", "pclk";
};
&uart_B {
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
clock-names = "baud", "xtal", "pclk";
};
&uart_C {
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
+ clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
clock-names = "baud", "xtal", "pclk";
};
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index c1947b5a688d..15449c72c042 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -49,6 +49,28 @@
status = "okay";
};
+&hsic0 {
+ status = "okay";
+
+ usb1@1 {
+ compatible = "usb424,2640";
+ reg = <0x01>;
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+
+ mass-storage@1 {
+ compatible = "usb424,4040";
+ reg = <0x01>;
+ status = "disabled";
+ };
+ };
+};
+
+&hsic_phy0 {
+ status = "okay";
+ reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+};
+
&mmc3 {
status = "okay";
max-frequency = <50000000>;
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index 6f480827b94d..59a108e49b41 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -201,6 +201,50 @@
status = "disabled";
};
+ hsic_phy0: hsic-phy@f0001800 {
+ compatible = "marvell,mmp3-hsic-phy",
+ "usb-nop-xceiv";
+ reg = <0xf0001800 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ hsic0: hsic@f0001000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xf0001000 0x200>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
+ clock-names = "USBCLK";
+ phys = <&hsic_phy0>;
+ phy-names = "usb";
+ phy_type = "hsic";
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ status = "disabled";
+ };
+
+ hsic_phy1: hsic-phy@f0002800 {
+ compatible = "marvell,mmp3-hsic-phy",
+ "usb-nop-xceiv";
+ reg = <0xf0002800 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ hsic1: hsic@f0002000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xf0002000 0x200>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
+ clock-names = "USBCLK";
+ phys = <&hsic_phy1>;
+ phy-names = "usb";
+ phy_type = "hsic";
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ status = "disabled";
+ };
+
mmc1: mmc@d4280000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xd4280000 0x120>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 000bf16de651..0e453fec2e3a 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -8,6 +8,7 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/bus/ti-sysc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
@@ -79,17 +80,37 @@
reg = <0x480FE000 0x1000>;
};
- sdma: dma-controller@48056000 {
- compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
- ti,hwmods = "dma";
- reg = <0x48056000 0x1000>;
- interrupts = <12>,
- <13>,
- <14>,
- <15>;
- #dma-cells = <1>;
- dma-channels = <32>;
- dma-requests = <64>;
+ target-module@48056000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x48056000 0x4>,
+ <0x4805602c 0x4>,
+ <0x48056028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&core_l3_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48056000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap2420-sdma", "ti,omap-sdma";
+ reg = <0 0x1000>;
+ interrupts = <12>,
+ <13>,
+ <14>,
+ <15>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <64>;
+ };
};
i2c1: i2c@48070000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 7f57af2f10ac..15ef7593be12 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -309,6 +309,10 @@
};
};
+&sdma {
+ compatible = "ti,omap2430-sdma", "ti,omap-sdma";
+};
+
&i2c1 {
compatible = "ti,omap2430-i2c";
};
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
new file mode 100644
index 000000000000..93ffeddada1e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de>
+ */
+/dts-v1/;
+
+#include "dm3725.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Amazon Echo (first generation)";
+ compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0xc600000>; /* 198 MB */
+ };
+
+ vcc5v: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc1v8: fixedregulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <40>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+
+ mute-button {
+ label = "mute";
+ linux,code = <KEY_MUTE>;
+ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; /* GPIO_70 */
+ wakeup-source;
+ };
+
+ help-button {
+ label = "help";
+ linux,code = <KEY_HELP>;
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; /* GPIO_72 */
+ wakeup-source;
+ };
+ };
+
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ gpios = <
+ &gpio3 5 GPIO_ACTIVE_HIGH /* GPIO_69 */
+ &gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
+ >;
+ linux,axis = <REL_X>;
+ rotary-encoder,relative-axis;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ lp5523A: lp5523A@32 {
+ compatible = "national,lp5523";
+ label = "q1";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+ enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+
+ lp5523B: lp5523B@33 {
+ compatible = "national,lp5523";
+ label = "q3";
+ reg = <0x33>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+
+ lp5523C: lp5523C@34 {
+ compatible = "national,lp5523";
+ label = "q4";
+ reg = <0x34>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+
+ lp5523D: lp552D@35 {
+ compatible = "national,lp5523";
+ label = "q2";
+ reg = <0x35>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+ tps_pins: pinmux_tps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc2 {
+ status = "okay";
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc3 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ non-removable;
+ disable-wp;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ vmmc-supply = <&vcc3v3>;
+ vqmmc-supply = <&vcc1v8>;
+};
+
+&tps {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps_pins>;
+
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ ti,en-ck32k-xtal;
+ ti,system-power-controller;
+
+ vcc1-supply = <&vcc5v>;
+ vcc2-supply = <&vcc5v>;
+ vcc3-supply = <&vcc5v>;
+ vcc4-supply = <&vcc5v>;
+ vcc5-supply = <&vcc5v>;
+ vcc6-supply = <&vcc5v>;
+ vcc7-supply = <&vcc5v>;
+ vccio-supply = <&vcc5v>;
+
+ regulators {
+
+ vio_reg: regulator@1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-name = "vdd_dsp";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index a638e059135b..c3c6d7d04a76 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -482,6 +482,11 @@
regulator-always-on;
};
+/* First two dma channels are reserved on secure omap3 */
+&sdma {
+ dma-channel-mask = <0xfffffffc>;
+};
+
&twl {
twl_audio: audio {
compatible = "ti,twl4030-audio";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 5698a3e241aa..634ea16a711e 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -206,17 +206,41 @@
reg = <0x48200000 0x1000>;
};
- sdma: dma-controller@48056000 {
- compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
- reg = <0x48056000 0x1000>;
- interrupts = <12>,
- <13>,
- <14>,
- <15>;
- #dma-cells = <1>;
- dma-channels = <32>;
- dma-requests = <96>;
- ti,hwmods = "dma";
+ target-module@48056000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x48056000 0x4>,
+ <0x4805602c 0x4>,
+ <0x48056028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */
+ clocks = <&core_l3_ick>;
+ clock-names = "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48056000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap3430-sdma", "ti,omap-sdma";
+ reg = <0x0 0x1000>;
+ interrupts = <12>,
+ <13>,
+ <14>,
+ <15>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <96>;
+ };
};
gpio1: gpio@48310000 {
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index c618cb257d00..71f3c8f1f924 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -223,6 +223,10 @@
};
};
+&sdma {
+ compatible = "ti,omap3630-sdma", "ti,omap-sdma";
+};
+
/* OMAP3630 needs dss_96m_fck for VENC */
&venc {
clocks = <&dss_tv_fck>, <&dss_96m_fck>;
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
index 6c892fc9d726..a6feb201c569 100644
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -219,7 +219,6 @@
target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "dmic";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
reg-names = "rev", "sysc";
@@ -279,7 +278,6 @@
mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "mcpdm";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
@@ -314,7 +312,6 @@
target-module@38000 { /* 0x40138000, ap 18 12.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer5";
reg = <0x38000 0x4>,
<0x38010 0x4>;
reg-names = "rev", "sysc";
@@ -345,7 +342,6 @@
target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer6";
reg = <0x3a000 0x4>,
<0x3a010 0x4>;
reg-names = "rev", "sysc";
@@ -376,7 +372,6 @@
target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer7";
reg = <0x3c000 0x4>,
<0x3c010 0x4>;
reg-names = "rev", "sysc";
@@ -407,7 +402,6 @@
target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer8";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
@@ -466,7 +460,6 @@
target-module@f1000 { /* 0x401f1000, ap 32 20.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "aess";
reg = <0xf1000 0x4>,
<0xf1010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 83f803be8ee2..408f51cbfbb3 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -136,7 +136,6 @@
target-module@56000 { /* 0x4a056000, ap 7 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "dma_system";
reg = <0x56000 0x4>,
<0x5602c 0x4>,
<0x56028 0x4>;
@@ -160,7 +159,7 @@
ranges = <0x0 0x56000 0x1000>;
sdma: dma-controller@0 {
- compatible = "ti,omap4430-sdma";
+ compatible = "ti,omap4430-sdma", "ti,omap-sdma";
reg = <0x0 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -174,7 +173,6 @@
target-module@58000 { /* 0x4a058000, ap 10 0e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "hsi";
reg = <0x58000 0x4>,
<0x58010 0x4>,
<0x58014 0x4>;
@@ -321,7 +319,6 @@
target-module@66000 { /* 0x4a066000, ap 25 26.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "mmu_dsp";
reg = <0x66000 0x4>,
<0x66010 0x4>,
<0x66014 0x4>;
@@ -335,12 +332,18 @@
/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
clock-names = "fck";
+ resets = <&prm_tesla 1>;
+ reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
- /* mmu_dsp cannot be moved before reset driver */
- status = "disabled";
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
};
};
@@ -420,7 +423,6 @@
target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "ocp2scp_usb_phy";
reg = <0x2d000 0x4>,
<0x2d010 0x4>,
<0x2d014 0x4>;
@@ -499,7 +501,6 @@
target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_mpu";
reg = <0x59038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -523,7 +524,6 @@
target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_iva";
reg = <0x5b038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -547,7 +547,6 @@
target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */
compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_core";
reg = <0x5d038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -613,7 +612,6 @@
target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spinlock";
reg = <0x76000 0x4>,
<0x76010 0x4>,
<0x76014 0x4>;
@@ -721,7 +719,6 @@
target-module@a000 { /* 0x4a10a000, ap 65 50.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "fdif";
reg = <0xa000 0x4>,
<0xa010 0x4>;
reg-names = "rev", "sysc";
@@ -1177,7 +1174,6 @@
target-module@c000 { /* 0x4a31c000, ap 11 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "kbd";
reg = <0xc000 0x4>,
<0xc010 0x4>,
<0xc014 0x4>;
@@ -1422,7 +1418,6 @@
target-module@32000 { /* 0x48032000, ap 5 02.0 */
compatible = "ti,sysc-omap2-timer", "ti,sysc";
- ti,hwmods = "timer2";
reg = <0x32000 0x4>,
<0x32010 0x4>,
<0x32014 0x4>;
@@ -1454,7 +1449,6 @@
target-module@34000 { /* 0x48034000, ap 7 04.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer3";
reg = <0x34000 0x4>,
<0x34010 0x4>;
reg-names = "rev", "sysc";
@@ -1482,7 +1476,6 @@
target-module@36000 { /* 0x48036000, ap 9 0e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer4";
reg = <0x36000 0x4>,
<0x36010 0x4>;
reg-names = "rev", "sysc";
@@ -1510,7 +1503,6 @@
target-module@3e000 { /* 0x4803e000, ap 11 08.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer9";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
@@ -1892,7 +1884,6 @@
target-module@76000 { /* 0x48076000, ap 39 38.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "slimbus2";
reg = <0x76000 0x4>,
<0x76010 0x4>;
reg-names = "rev", "sysc";
@@ -1913,7 +1904,6 @@
target-module@78000 { /* 0x48078000, ap 41 1a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "elm";
reg = <0x78000 0x4>,
<0x78010 0x4>,
<0x78014 0x4>;
@@ -1942,7 +1932,6 @@
target-module@86000 { /* 0x48086000, ap 43 24.0 */
compatible = "ti,sysc-omap2-timer", "ti,sysc";
- ti,hwmods = "timer10";
reg = <0x86000 0x4>,
<0x86010 0x4>,
<0x86014 0x4>;
@@ -1975,7 +1964,6 @@
target-module@88000 { /* 0x48088000, ap 45 2e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer11";
reg = <0x88000 0x4>,
<0x88010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2de8a6b53de9..38b4146d4d33 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -173,14 +173,6 @@
#gpio-cells = <2>;
};
- mmu_dsp: mmu@4a066000 {
- compatible = "ti,omap4-iommu";
- reg = <0x4a066000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_dsp";
- #iommu-cells = <0>;
- };
-
target-module@52000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
ti,hwmods = "iss";
@@ -206,17 +198,37 @@
/* No child device binding, driver in staging */
};
- mmu_ipu: mmu@55082000 {
- compatible = "ti,omap4-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
+
target-module@4012c000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "slimbus1";
reg = <0x4012c000 0x4>,
<0x4012c010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
index 23aa90716f7f..4ec7909df78b 100644
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -203,7 +203,6 @@
target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "dmic";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
reg-names = "rev", "sysc";
@@ -244,7 +243,6 @@
mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "mcpdm";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
@@ -279,7 +277,6 @@
target-module@38000 { /* 0x40138000, ap 18 12.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer5";
reg = <0x38000 0x4>,
<0x38010 0x4>;
reg-names = "rev", "sysc";
@@ -311,7 +308,6 @@
target-module@3a000 { /* 0x4013a000, ap 20 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer6";
reg = <0x3a000 0x4>,
<0x3a010 0x4>;
reg-names = "rev", "sysc";
@@ -343,7 +339,6 @@
target-module@3c000 { /* 0x4013c000, ap 22 16.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer7";
reg = <0x3c000 0x4>,
<0x3c010 0x4>;
reg-names = "rev", "sysc";
@@ -374,7 +369,6 @@
target-module@3e000 { /* 0x4013e000, ap 24 18.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer8";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 25aacf1ba708..34410b7d77e2 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -213,7 +213,6 @@
target-module@56000 { /* 0x4a056000, ap 7 02.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "dma_system";
reg = <0x56000 0x4>,
<0x5602c 0x4>,
<0x56028 0x4>;
@@ -237,7 +236,7 @@
ranges = <0x0 0x56000 0x1000>;
sdma: dma-controller@0 {
- compatible = "ti,omap4430-sdma";
+ compatible = "ti,omap4430-sdma", "ti,omap-sdma";
reg = <0x0 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -349,7 +348,6 @@
target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "mmu_dsp";
reg = <0x66000 0x4>,
<0x66010 0x4>,
<0x66014 0x4>;
@@ -364,12 +362,18 @@
/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
clock-names = "fck";
+ resets = <&prm_dsp 1>;
+ reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
- /* mmu_dsp cannot be moved before reset driver */
- status = "disabled";
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
};
target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
@@ -430,7 +434,6 @@
target-module@0 { /* 0x4a080000, ap 83 28.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "ocp2scp1";
reg = <0x0 0x4>,
<0x10 0x4>,
<0x14 0x4>;
@@ -488,7 +491,6 @@
target-module@10000 { /* 0x4a090000, ap 89 36.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "ocp2scp3";
reg = <0x10000 0x4>,
<0x10010 0x4>,
<0x10014 0x4>;
@@ -627,7 +629,6 @@
target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "spinlock";
reg = <0x76000 0x4>,
<0x76010 0x4>,
<0x76014 0x4>;
@@ -1061,7 +1062,6 @@
target-module@32000 { /* 0x48032000, ap 5 3e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer2";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
@@ -1089,7 +1089,6 @@
target-module@34000 { /* 0x48034000, ap 7 46.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer3";
reg = <0x34000 0x4>,
<0x34010 0x4>;
reg-names = "rev", "sysc";
@@ -1117,7 +1116,6 @@
target-module@36000 { /* 0x48036000, ap 9 4e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer4";
reg = <0x36000 0x4>,
<0x36010 0x4>;
reg-names = "rev", "sysc";
@@ -1145,7 +1143,6 @@
target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer9";
reg = <0x3e000 0x4>,
<0x3e010 0x4>;
reg-names = "rev", "sysc";
@@ -1713,7 +1710,6 @@
target-module@86000 { /* 0x48086000, ap 41 5e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer10";
reg = <0x86000 0x4>,
<0x86010 0x4>;
reg-names = "rev", "sysc";
@@ -1742,7 +1738,6 @@
target-module@88000 { /* 0x48088000, ap 43 66.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer11";
reg = <0x88000 0x4>,
<0x88010 0x4>;
reg-names = "rev", "sysc";
@@ -2358,7 +2353,6 @@
target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "kbd";
reg = <0xc000 0x4>,
<0xc010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 1f6ad1debc90..d0ecf54d5a23 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -186,21 +186,33 @@
#gpio-cells = <2>;
};
- mmu_dsp: mmu@4a066000 {
- compatible = "ti,omap4-iommu";
- reg = <0x4a066000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_dsp";
- #iommu-cells = <0>;
- };
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
- mmu_ipu: mmu@55082000 {
- compatible = "ti,omap4-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
dmm@4e000000 {
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0a0fb147ebb9..fa1852eed37b 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-apq8084.h>
#include <dt-bindings/gpio/gpio.h>
@@ -184,7 +185,7 @@
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 7 0xf04>;
+ interrupts = <GIC_PPI 7 0xf04>;
};
clocks {
@@ -203,10 +204,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
+ interrupts = <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 4 0xf08>,
+ <GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
@@ -253,12 +254,13 @@
tsens: thermal-sensor@fc4a8000 {
compatible = "qcom,msm8974-tsens";
- reg = <0xfc4a8000 0x2000>;
+ reg = <0xfc4a9000 0x1000>, /* TM */
+ <0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
+ #qcom,sensors = <11>;
#thermal-sensor-cells = <1>;
};
-
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -269,50 +271,50 @@
frame@f9021000 {
frame-number = <0>;
- interrupts = <0 8 0x4>,
- <0 7 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
- interrupts = <0 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
- interrupts = <0 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
- interrupts = <0 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
- interrupts = <0 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
- interrupts = <0 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
@@ -404,13 +406,13 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
- interrupts = <0 114 0x0>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -420,7 +422,7 @@
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 123 0>, <0 138 0>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
@@ -433,7 +435,7 @@
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
@@ -449,7 +451,7 @@
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
@@ -463,7 +465,7 @@
compatible = "qcom,smd";
rpm {
- interrupts = <0 168 1>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 8ef26da32ff4..71bb25a8afc0 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -102,6 +102,7 @@
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
+ qcom,saw = <&saw_l2>;
};
};
@@ -353,6 +354,12 @@
regulator;
};
+ saw_l2: regulator@b012000 {
+ compatible = "qcom,saw2";
+ reg = <0xb012000 0x1000>;
+ regulator;
+ };
+
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 26160394d717..d2d48770ec0f 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -259,6 +259,25 @@
status = "ok";
};
+ remoteproc@fb21b000 {
+ status = "ok";
+
+ vddmx-supply = <&pm8841_s1>;
+ vddcx-supply = <&pm8841_s2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+
+ smd-edge {
+ qcom,remote-pid = <4>;
+ label = "pronto";
+
+ wcnss {
+ status = "ok";
+ };
+ };
+ };
+
pinctrl@fd510000 {
sdhc1_pin_a: sdhc1-pin-active {
clk {
@@ -287,6 +306,32 @@
bias-pull-up;
};
};
+
+ wcnss_pin_a: wcnss-pin-active {
+ wlan {
+ pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "wlan";
+
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ bt {
+ pins = "gpio35", "gpio43", "gpio44";
+ function = "bt";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ fm {
+ pins = "gpio41", "gpio42";
+ function = "fm";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
};
sdhci@f9824900 {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 9a84eb0cbbe6..4b161b809dd5 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/interconnect/qcom,msm8974.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
@@ -20,17 +21,17 @@
#size-cells = <1>;
ranges;
- mpss@8000000 {
+ mpss_region: mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
- mba@d100000 {
+ mba_region: mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
- reserved@d200000 {
+ wcnss_region: wcnss@d200000 {
reg = <0x0d200000 0xa00000>;
no-map;
};
@@ -61,8 +62,11 @@
};
rmtfs@fd80000 {
+ compatible = "qcom,rmtfs-mem";
reg = <0x0fd80000 0x180000>;
no-map;
+
+ qcom,client-id = <1>;
};
};
@@ -356,6 +360,15 @@
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+
+ label = "lpass";
+ };
};
smem {
@@ -795,6 +808,119 @@
clock-names = "core";
};
+ remoteproc@fc880000 {
+ compatible = "qcom,msm8974-mss-pil";
+ reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+
+ qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 12>;
+ qcom,smd-edge = <0>;
+
+ label = "modem";
+ };
+ };
+
+ pronto: remoteproc@fb21b000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ memory-region = <&wcnss_region>;
+
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ vddpx-supply = <&pm8941_s3>;
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3680";
+
+ clocks = <&rpmcc RPM_SMD_CXO_A2>;
+ clock-names = "xo";
+
+ vddxo-supply = <&pm8941_l6>;
+ vddrfa-supply = <&pm8941_l11>;
+ vddpa-supply = <&pm8941_l19>;
+ vdddig-supply = <&pm8941_s3>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+ status = "disabled";
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8974-pinctrl";
reg = <0xfd510000 0x4000>;
@@ -1179,6 +1305,79 @@
};
};
+ ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x180000>;
+ reg-names = "ctrl",
+ "mem";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core",
+ "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x100000>;
+ };
+ };
+
+ bimc: interconnect@fc380000 {
+ reg = <0xfc380000 0x6a000>;
+ compatible = "qcom,msm8974-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ snoc: interconnect@fc460000 {
+ reg = <0xfc460000 0x4000>;
+ compatible = "qcom,msm8974-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ pnoc: interconnect@fc468000 {
+ reg = <0xfc468000 0x4000>;
+ compatible = "qcom,msm8974-pnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ ocmemnoc: interconnect@fc470000 {
+ reg = <0xfc470000 0x4000>;
+ compatible = "qcom,msm8974-ocmemnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+ };
+
+ mmssnoc: interconnect@fc478000 {
+ reg = <0xfc478000 0x4000>;
+ compatible = "qcom,msm8974-mmssnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&mmcc MMSS_S0_AXI_CLK>,
+ <&mmcc MMSS_S0_AXI_CLK>;
+ };
+
+ cnoc: interconnect@fc480000 {
+ reg = <0xfc480000 0x4000>;
+ compatible = "qcom,msm8974-cnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ };
+
mdss: mdss@fd900000 {
status = "disabled";
@@ -1225,6 +1424,9 @@
"core",
"vsync";
+ interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+ interconnect-names = "mdp0-mem";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1325,20 +1527,6 @@
smd {
compatible = "qcom,smd";
- adsp {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 8>;
- qcom,smd-edge = <1>;
- };
-
- modem {
- interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 12>;
- qcom,smd-edge = <0>;
- };
-
rpm {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index d03dcd919d6f..75b2796ebfca 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -313,9 +313,9 @@
mmcif: mmc@e804c800 {
compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
reg = <0xe804c800 0x80>;
- interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
@@ -326,9 +326,9 @@
sdhi0: sd@e804e000 {
compatible = "renesas,sdhi-r7s72100";
reg = <0xe804e000 0x100>;
- interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
<&mstp12_clks R7S72100_CLK_SDHI01>;
@@ -342,9 +342,9 @@
sdhi1: sd@e804e800 {
compatible = "renesas,sdhi-r7s72100";
reg = <0xe804e800 0x100>;
- interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
<&mstp12_clks R7S72100_CLK_SDHI11>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index dd865f3c2eda..a5cd31229fbd 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -84,27 +84,27 @@
dma0: dma-controller@e6700020 {
compatible = "renesas,shdma-r8a73a4";
reg = <0 0xe6700020 0 0x89e0>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 758360a2edc3..d960c2767f61 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -60,8 +60,7 @@
enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
- states = <3300000 0
- 1800000 1>;
+ states = <3300000 0>, <1800000 1>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 12ffe73bf2bc..ebc1ff64f530 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -102,14 +102,14 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -124,14 +124,14 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -146,14 +146,14 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -168,14 +168,14 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -198,10 +198,10 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xfff20000 0x425>;
- interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
power-domains = <&pd_a4r>;
status = "disabled";
@@ -212,10 +212,10 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xe6c20000 0x425>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -342,8 +342,8 @@
mmcif0: mmc@e6bd0000 {
compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_MMC>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -352,9 +352,9 @@
sdhi0: sd@e6850000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6850000 0x100>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -365,9 +365,9 @@
sdhi1: sd@e6860000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6860000 0x100>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -378,9 +378,9 @@
sdhi2: sd@e6870000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6870000 0x100>;
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index de981d629bdd..1cd19a569bd0 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -399,6 +399,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -417,6 +420,9 @@
icram2: sram@e6300000 {
compatible = "mmio-sram";
reg = <0 0xe6300000 0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe6300000 0x40000>;
};
/* The memory map in the User's Manual maps the cores to
@@ -600,8 +606,8 @@
compatible = "renesas,r8a7743-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
@@ -614,8 +620,8 @@
compatible = "renesas,r8a7743-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
@@ -628,22 +634,22 @@
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -661,22 +667,22 @@
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1366,20 +1372,20 @@
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1397,20 +1403,20 @@
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1461,10 +1467,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
@@ -1496,10 +1502,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x10800 0 0 0 0>;
@@ -1611,13 +1617,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index fa74a262107b..1c82dd0abd76 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -399,6 +399,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -417,6 +420,9 @@
icram2: sram@e6300000 {
compatible = "mmio-sram";
reg = <0 0xe6300000 0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe6300000 0x40000>;
};
/* The memory map in the User's Manual maps the cores to
@@ -600,8 +606,8 @@
compatible = "renesas,r8a7744-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
@@ -614,8 +620,8 @@
compatible = "renesas,r8a7744-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
@@ -628,22 +634,22 @@
compatible = "renesas,dmac-r8a7744",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -661,22 +667,22 @@
compatible = "renesas,dmac-r8a7744",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1366,20 +1372,20 @@
compatible = "renesas,dmac-r8a7744",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1397,20 +1403,20 @@
compatible = "renesas,dmac-r8a7744",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1461,10 +1467,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
@@ -1496,10 +1502,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x10800 0 0 0 0>;
@@ -1597,13 +1603,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index ce6603b0994b..58d369ad8279 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -76,8 +76,7 @@
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
};
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index c53f7ff20695..3f88a7e34af2 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -363,6 +363,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -381,6 +384,9 @@
icram2: sram@e6300000 {
compatible = "mmio-sram";
reg = <0 0xe6300000 0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe6300000 0x40000>;
};
i2c0: i2c@e6508000 {
#address-cells = <1>;
@@ -543,8 +549,8 @@
compatible = "renesas,r8a7745-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -557,8 +563,8 @@
compatible = "renesas,r8a7745-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -571,22 +577,22 @@
compatible = "renesas,dmac-r8a7745",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -604,22 +610,22 @@
compatible = "renesas,dmac-r8a7745",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1293,20 +1299,20 @@
compatible = "renesas,dmac-r8a7745",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1337,10 +1343,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
@@ -1372,10 +1378,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x10800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 450efe923008..8ac61b50aec0 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -65,8 +65,7 @@
gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
};
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 51806c7f486a..6efcef1670e1 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -242,6 +242,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -260,6 +263,9 @@
icram2: sram@e6300000 {
compatible = "mmio-sram";
reg = <0 0xe6300000 0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe6300000 0x20000>;
};
i2c0: i2c@e6508000 {
@@ -407,8 +413,8 @@
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -421,8 +427,8 @@
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -435,8 +441,8 @@
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a8000 0 0x100>;
- interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 326>;
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -449,8 +455,8 @@
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b8000 0 0x100>;
- interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 327>;
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -463,22 +469,22 @@
compatible = "renesas,dmac-r8a77470",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -496,22 +502,22 @@
compatible = "renesas,dmac-r8a77470",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 10d996d2941f..593c6df90303 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -79,10 +79,10 @@
<0xfe780024 4>,
<0xfe780044 4>,
<0xfe780064 4>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
sense-bitfield-width = <2>;
};
@@ -498,14 +498,17 @@
audio_clk_a: audio_clk_a {
compatible = "fixed-clock";
#clock-cells = <0>;
+ clock-frequency = <0>;
};
audio_clk_b: audio_clk_b {
compatible = "fixed-clock";
#clock-cells = <0>;
+ clock-frequency = <0>;
};
audio_clk_c: audio_clk_c {
compatible = "fixed-clock";
#clock-cells = <0>;
+ clock-frequency = <0>;
};
/* Fixed ratio clocks */
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index c755f0b8fd0d..d2240b89ee52 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -48,8 +48,7 @@
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
ethernet@18000000 {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index ebf5b7cfe215..beb9885e6ffc 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -68,6 +68,14 @@
<0xf0000100 0x100>;
};
+ timer@f0000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xf0000200 0x100>;
+ interrupts = <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+ };
+
timer@f0000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
@@ -164,10 +172,10 @@
<0xfe780044 4>,
<0xfe780064 4>,
<0xfe780000 4>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
sense-bitfield-width = <2>;
};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 6ec2cf7eb354..097fd9317c6e 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -150,8 +150,7 @@
gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -174,8 +173,7 @@
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
audio_clock: audio_clock {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 5a2747758f67..334ba19769b9 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -487,6 +487,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -669,8 +672,8 @@
compatible = "renesas,r8a7790-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -683,8 +686,8 @@
compatible = "renesas,r8a7790-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -697,22 +700,22 @@
compatible = "renesas,dmac-r8a7790",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -730,22 +733,22 @@
compatible = "renesas,dmac-r8a7790",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1300,20 +1303,20 @@
compatible = "renesas,dmac-r8a7790",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1331,20 +1334,20 @@
compatible = "renesas,dmac-r8a7790",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1388,10 +1391,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
@@ -1423,10 +1426,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
pci2: pci@ee0d0000 {
@@ -1446,10 +1449,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x20800 0 0 0 0>;
@@ -1614,13 +1617,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index af6bd8fcd5a4..2b096d5e06fb 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -193,8 +193,7 @@
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -217,8 +216,7 @@
gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -241,8 +239,7 @@
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
audio_clock: audio_clock {
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index d6cf16aac14d..f9ece7ab2010 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -63,8 +63,7 @@
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -85,8 +84,7 @@
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
hdmi-out {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6f875502453c..59a55e87fcc6 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -420,6 +420,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -618,8 +621,8 @@
compatible = "renesas,r8a7791-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -632,8 +635,8 @@
compatible = "renesas,r8a7791-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -646,22 +649,22 @@
compatible = "renesas,dmac-r8a7791",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -679,22 +682,22 @@
compatible = "renesas,dmac-r8a7791",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1338,20 +1341,20 @@
compatible = "renesas,dmac-r8a7791",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1369,20 +1372,20 @@
compatible = "renesas,dmac-r8a7791",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1426,10 +1429,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
@@ -1461,10 +1464,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x10800 0 0 0 0>;
@@ -1598,13 +1601,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index c4ea2d676030..39af16caa2ae 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -345,6 +345,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -466,22 +469,22 @@
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -499,22 +502,22 @@
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 48fbeb6340fd..22ca7cd1e7d2 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -179,8 +179,7 @@
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -203,8 +202,7 @@
gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -227,8 +225,7 @@
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
audio_clock: audio_clock {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index bf05110fac4e..eef035c4d983 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -406,6 +406,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -565,22 +568,22 @@
compatible = "renesas,dmac-r8a7793",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -598,22 +601,22 @@
compatible = "renesas,dmac-r8a7793",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1166,20 +1169,20 @@
compatible = "renesas,dmac-r8a7793",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1197,20 +1200,20 @@
compatible = "renesas,dmac-r8a7793",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 1d22fcdc5d22..f79fce74cd9c 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -60,8 +60,7 @@
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -84,8 +83,7 @@
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
lbsc {
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index b3177aea45d1..2c16ad854300 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -126,8 +126,7 @@
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vga-encoder {
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8d797d34816e..05ef79c6ed7f 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -351,6 +351,9 @@
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe63a0000 0x12000>;
};
icram1: sram@e63c0000 {
@@ -527,22 +530,22 @@
compatible = "renesas,dmac-r8a7794",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -560,22 +563,22 @@
compatible = "renesas,dmac-r8a7794",
"renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1132,20 +1135,20 @@
compatible = "renesas,dmac-r8a7794",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3", "ch4",
"ch5", "ch6", "ch7", "ch8", "ch9",
@@ -1176,10 +1179,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
@@ -1211,10 +1214,10 @@
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x10800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index c70182c5aeb1..cf36e25195b4 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -224,7 +224,7 @@
status = "disabled";
};
- sdmmc: dwmmc@10214000 {
+ sdmmc: mmc@10214000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
clock-frequency = <37500000>;
@@ -238,7 +238,7 @@
status = "disabled";
};
- sdio: dwmmc@10218000 {
+ sdio: mmc@10218000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10218000 0x4000>;
max-frequency = <37500000>;
@@ -252,7 +252,7 @@
status = "disabled";
};
- emmc: dwmmc@1021c000 {
+ emmc: mmc@1021c000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x1021c000 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index c8b62bbd6a4a..ad1afd403052 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -466,9 +466,12 @@
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
vmmcq-supply = <&vccio_wl>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio3>;
interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 340ed6ccb08f..4e90efdc9630 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -662,7 +662,7 @@
};
};
- sdmmc: dwmmc@30000000 {
+ sdmmc: mmc@30000000 {
compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30000000 0x4000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -675,7 +675,7 @@
status = "disabled";
};
- sdio: dwmmc@30010000 {
+ sdio: mmc@30010000 {
compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30010000 0x4000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -688,7 +688,7 @@
status = "disabled";
};
- emmc: dwmmc@30020000 {
+ emmc: mmc@30020000 {
compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30020000 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 2afd686b2033..018802df4c0e 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -97,7 +97,7 @@
};
panel: panel {
- compatible = "lg,lp079qx1-sp0v", "simple-panel";
+ compatible = "lg,lp079qx1-sp0v";
backlight = <&backlight>;
enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&lcd_cs>;
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 0aeef23ca3db..312582c1bd37 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -113,6 +113,17 @@
cpu0-supply = <&vdd_cpu>;
};
+&cpu_opp_table {
+ opp-1704000000 {
+ opp-hz = /bits/ 64 <1704000000>;
+ opp-microvolt = <1350000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1400000>;
+ };
+};
+
&gmac {
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
@@ -175,7 +186,7 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
+ regulator-max-microvolt = <1400000>;
regulator-name = "vdd_arm";
regulator-ramp-delay = <6000>;
regulator-state-mem {
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
index 406146cbff29..aa33d09184ad 100644
--- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
/ {
model = "Google Brain";
@@ -40,6 +41,14 @@
};
&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+ >;
+
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
new file mode 100644
index 000000000000..a10d25ac8f7b
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
+ * chip.
+ *
+ * Copyright 2019 Google, Inc
+ */
+
+&uart0 {
+ bluetooth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
+ <&bt_dev_wake>;
+
+ compatible = "brcm,bcm43540-bt";
+ host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ max-speed = <3000000>;
+ brcm,bt-pcm-int-params = [01 02 00 01 01];
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index ffb60f880b39..05112c25176d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -136,27 +136,6 @@
};
&pinctrl {
- pinctrl-0 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Wake only */
- &suspend_l_wake
- &bt_dev_wake_awake
- >;
- pinctrl-1 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Sleep only */
- &suspend_l_sleep
- &bt_dev_wake_sleep
- >;
-
buttons {
ap_lid_int_l: ap-lid-int-l {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
index 300a7e32c978..32c0f10765dd 100644
--- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -54,7 +54,7 @@
};
panel: panel {
- compatible = "innolux,n116bge", "simple-panel";
+ compatible = "innolux,n116bge";
status = "okay";
power-supply = <&panel_regulator>;
backlight = <&backlight>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
index 9a0f55085839..309b122b4d0d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
@@ -18,8 +18,6 @@
"google,veyron-fievel-rev0", "google,veyron-fievel",
"google,veyron", "rockchip,rk3288";
- /delete-node/ bt-activity;
-
vccsys: vccsys {
compatible = "regulator-fixed";
regulator-name = "vccsys";
@@ -215,7 +213,11 @@
"PHY_PMEB",
"PHY_INT",
- "REC_MODE_L",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
"OTP_OUT",
"",
"USB_OTG_POWER_EN",
@@ -382,7 +384,11 @@
"PWR_LED1",
"TPM_INT_H",
"SPK_ON",
- "FW_WP_AP",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
"",
"CPU_NMI",
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index a4966e505a2f..171ba6185b6d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -273,6 +273,28 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ &bt_dev_wake_awake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ &bt_dev_wake_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index a6ee44f0fe13..66f00d28801a 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -418,6 +418,28 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ &bt_dev_wake_awake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ &bt_dev_wake_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index 06a6a9554c48..ffd1121d19be 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
/ {
model = "Google Mickey";
@@ -411,6 +412,14 @@
};
&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+ >;
+
hdmi {
power_hdmi_on: power-hdmi-on {
rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index c833716dbe48..383fad1a88a1 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
/ {
model = "Google Minnie";
@@ -70,7 +71,7 @@
};
&panel {
- compatible = "auo,b101ean01", "simple-panel";
+ compatible = "auo,b101ean01";
/delete-node/ panel-timing;
@@ -344,6 +345,26 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index f420499f300a..71e6629cc208 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -64,6 +64,28 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ &bt_dev_wake_awake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ &bt_dev_wake_sleep
+ >;
+
/delete-node/ lcd;
backlight {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index 2f2989bc3f9c..e354c61a45e7 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
#include "cros-ec-sbs.dtsi"
/ {
@@ -279,6 +280,26 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
index bebb230e592f..069f0c2c1fdf 100644
--- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
@@ -53,7 +53,7 @@
};
&panel {
- compatible = "auo,b101ean01", "simple-panel";
+ compatible = "auo,b101ean01";
/delete-node/ panel-timing;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 7525e3dd1fc1..54a6838d73f5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -23,30 +23,6 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- bt_activity: bt-activity {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake>;
-
- /*
- * HACK: until we have an LPM driver, we'll use an
- * ugly GPIO key to allow Bluetooth to wake from S3.
- * This is expected to only be used by BT modules that
- * use UART for comms. For BT modules that talk over
- * SDIO we should use a wakeup mechanism related to SDIO.
- *
- * Use KEY_RESERVED here since that will work as a wakeup but
- * doesn't get reported to higher levels (so doesn't confuse
- * Chrome).
- */
- bt-wake {
- label = "BT Wakeup";
- gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESERVED>;
- wakeup-source;
- };
-
- };
power_button: power-button {
compatible = "gpio-keys";
@@ -82,22 +58,17 @@
clocks = <&rk808 RK808_CLKOUT1>;
clock-names = "ext_clock";
pinctrl-names = "default";
- pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
+ pinctrl-0 = <&wifi_enable_h>;
/*
- * Depending on the actual card populated GPIO4 D4 and D5
+ * Depending on the actual card populated GPIO4 D4
* correspond to one of these signals on the module:
*
* D4:
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
- *
- * D5:
- * - BT_I2S_WS_BT_RFDISABLE_L
- * - No connect
*/
- reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
- <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_5v: vcc-5v {
@@ -481,26 +452,6 @@
};
&pinctrl {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Wake only */
- &bt_dev_wake_awake
- >;
- pinctrl-1 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Sleep only */
- &bt_dev_wake_sleep
- >;
-
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
bias-disable;
drive-strength = <8>;
@@ -622,6 +573,10 @@
bt_dev_wake_awake: bt-dev-wake-awake {
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
};
+
+ bt_dev_wake: bt-dev-wake {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
tpm {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 415c75f5783c..9beb662166aa 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -247,7 +247,7 @@
ports = <&vopl_out>, <&vopb_out>;
};
- sdmmc: dwmmc@ff0c0000 {
+ sdmmc: mmc@ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
@@ -261,7 +261,7 @@
status = "disabled";
};
- sdio0: dwmmc@ff0d0000 {
+ sdio0: mmc@ff0d0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
@@ -275,7 +275,7 @@
status = "disabled";
};
- sdio1: dwmmc@ff0e0000 {
+ sdio1: mmc@ff0e0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
@@ -289,7 +289,7 @@
status = "disabled";
};
- emmc: dwmmc@ff0f0000 {
+ emmc: mmc@ff0f0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 97307a405e60..241f43e29c77 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -231,7 +231,7 @@
status = "disabled";
};
- mmc0: dwmmc@10214000 {
+ mmc0: mmc@10214000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10214000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -245,7 +245,7 @@
status = "disabled";
};
- mmc1: dwmmc@10218000 {
+ mmc1: mmc@10218000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10218000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -259,7 +259,7 @@
status = "disabled";
};
- emmc: dwmmc@1021c000 {
+ emmc: mmc@1021c000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x1021c000 0x1000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
new file mode 100644
index 000000000000..df3712aedf8a
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&gmac {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <140>;
+ i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ vqmmc-supply = <&vccio_sd>;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins =
+ <4 RK_PD6 0 &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 5876690ee09e..1fd06e7cb983 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -456,7 +456,7 @@
#reset-cells = <1>;
};
- emmc: dwmmc@30110000 {
+ emmc: mmc@30110000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30110000 0x4000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +468,7 @@
status = "disabled";
};
- sdio: dwmmc@30120000 {
+ sdio: mmc@30120000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30120000 0x4000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -480,7 +480,7 @@
status = "disabled";
};
- sdmmc: dwmmc@30130000 {
+ sdmmc: mmc@30130000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30130000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index cb371bf72f64..811bfdef4e9b 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG SMDK2416 board device tree source
+ * Samsung SMDK2416 board device tree source
*
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*/
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index 3bf6c450a26e..96267f5f02a8 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -4,7 +4,7 @@
*
* Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
*
- * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Device tree source file for Samsung SMDK6410 board which is based on
* Samsung's S3C6410 SoC.
*/
@@ -16,7 +16,7 @@
#include "s3c6410.dtsi"
/ {
- model = "SAMSUNG SMDK6410 board based on S3C6410";
+ model = "Samsung SMDK6410 board based on S3C6410";
compatible = "samsung,mini6410", "samsung,s3c6410";
memory@50000000 {
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
new file mode 100644
index 000000000000..326b39328b58
--- /dev/null
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Microchip SAM9X60 SoC";
+ compatible = "microchip,sam9x60";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ sram: sram@300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x100000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usb1: ohci@600000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00600000 0x100000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
+ status = "disabled";
+ };
+
+ usb2: ehci@700000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00700000 0x100000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+ clock-names = "usb_clk", "ehci_clk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ assigned-clock-rates = <480000000>;
+ status = "disabled";
+ };
+
+ ebi: ebi@10000000 {
+ compatible = "microchip,sam9x60-ebi";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ atmel,smc = <&smc>;
+ microchip,sfr = <&sfr>;
+ reg = <0x10000000 0x60000000>;
+ ranges = <0x0 0x0 0x10000000 0x10000000
+ 0x1 0x0 0x20000000 0x10000000
+ 0x2 0x0 0x30000000 0x10000000
+ 0x3 0x0 0x40000000 0x10000000
+ 0x4 0x0 0x50000000 0x10000000
+ 0x5 0x0 0x60000000 0x10000000>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+ status = "disabled";
+
+ nand_controller: nand-controller {
+ compatible = "microchip,sam9x60-nand-controller";
+ ecc-engine = <&pmecc>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+ };
+ };
+
+ sdmmc0: sdio-host@80000000 {
+ compatible = "microchip,sam9x60-sdhci";
+ reg = <0x80000000 0x300>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+ clock-names = "hclock", "multclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+ assigned-clock-rates = <100000000>;
+ status = "disabled";
+ };
+
+ sdmmc1: sdio-host@90000000 {
+ compatible = "microchip,sam9x60-sdhci";
+ reg = <0x90000000 0x300>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+ clock-names = "hclock", "multclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+ assigned-clock-rates = <100000000>;
+ status = "disabled";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flx4: flexcom@f0000000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0000000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0000000 0x800>;
+ status = "disabled";
+ };
+
+ flx5: flexcom@f0004000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0004000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0004000 0x800>;
+ status = "disabled";
+ };
+
+ dma0: dma-controller@f0008000 {
+ compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+ reg = <0xf0008000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+ clock-names = "dma_clk";
+ };
+
+ ssc: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(38))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(39))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ qspi: spi@f0014000 {
+ compatible = "microchip,sam9x60-qspi";
+ reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(26))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(27))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+ clock-names = "pclk", "qspick";
+ atmel,pmc = <&pmc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s: i2s@f001c000 {
+ compatible = "microchip,sam9x60-i2smcc";
+ reg = <0xf001c000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(36))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ flx11: flexcom@f0020000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0020000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0020000 0x800>;
+ status = "disabled";
+ };
+
+ flx12: flexcom@f0024000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0024000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0024000 0x800>;
+ status = "disabled";
+ };
+
+ pit64b: timer@f0028000 {
+ compatible = "microchip,sam9x60-pit64b";
+ reg = <0xf0028000 0x100>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+ clock-names = "pclk", "gclk";
+ };
+
+ sha: sha@f002c000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xf002c000 0x100>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(34))>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+ clock-names = "sha_clk";
+ status = "okay";
+ };
+
+ trng: trng@f0030000 {
+ compatible = "microchip,sam9x60-trng";
+ reg = <0xf0030000 0x100>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ status = "okay";
+ };
+
+ aes: aes@f0034000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xf0034000 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(33))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ clock-names = "aes_clk";
+ status = "okay";
+ };
+
+ tdes: tdes@f0038000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xf0038000 0x100>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(30))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
+
+ classd: classd@f003c000 {
+ compatible = "atmel,sama5d2-classd";
+ reg = <0xf003c000 0x100>;
+ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(35))>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ can0: can@f8000000 {
+ compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+ reg = <0xf8000000 0x300>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ can1: can@f8004000 {
+ compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+ reg = <0xf8004000 0x300>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ tcb0: timer@f8008000 {
+ compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf8008000 0x100>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ tcb1: timer@f800c000 {
+ compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf800c000 0x100>;
+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ flx6: flexcom@f8010000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8010000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8010000 0x800>;
+ status = "disabled";
+ };
+
+ flx7: flexcom@f8014000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8014000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8014000 0x800>;
+ status = "disabled";
+ };
+
+ flx8: flexcom@f8018000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8018000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8018000 0x800>;
+ status = "disabled";
+ };
+
+ flx0: flexcom@f801c000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf801c000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf801c000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@f8020000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8020000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8020000 0x800>;
+ status = "disabled";
+ };
+
+ flx2: flexcom@f8024000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8024000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8024000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@f8028000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8028000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8028000 0x800>;
+ status = "disabled";
+ };
+
+ macb0: ethernet@f802c000 {
+ compatible = "cdns,sam9x60-macb", "cdns,macb";
+ reg = <0xf802c000 0x1000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
+ macb1: ethernet@f8030000 {
+ compatible = "cdns,sam9x60-macb", "cdns,macb";
+ reg = <0xf8030000 0x1000>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
+ pwm0: pwm@f8034000 {
+ compatible = "microchip,sam9x60-pwm";
+ reg = <0xf8034000 0x300>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+ #pwm-cells = <3>;
+ status="disabled";
+ };
+
+ hlcdc: hlcdc@f8038000 {
+ compatible = "microchip,sam9x60-hlcdc";
+ reg = <0xf8038000 0x4000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ #pwm-cells = <3>;
+ };
+ };
+
+ flx9: flexcom@f8040000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8040000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8040000 0x800>;
+ status = "disabled";
+ };
+
+ flx10: flexcom@f8044000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8044000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8044000 0x800>;
+ status = "disabled";
+ };
+
+ isi: isi@f8048000 {
+ compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+ reg = <0xf8048000 0x100>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+ clock-names = "isi_clk";
+ status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ adc: adc@f804c000 {
+ compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+ reg = <0xf804c000 0x100>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+ clock-names = "adc_clk";
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+ dma-names = "rx";
+ atmel,min-sample-rate-hz = <200000>;
+ atmel,max-sample-rate-hz = <20000000>;
+ atmel,startup-time-ms = <4>;
+ atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ sfr: sfr@f8050000 {
+ compatible = "microchip,sam9x60-sfr", "syscon";
+ reg = <0xf8050000 0x100>;
+ };
+
+ matrix: matrix@ffffde00 {
+ compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+ reg = <0xffffde00 0x200>;
+ };
+
+ pmecc: ecc-engine@ffffe000 {
+ compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+ reg = <0xffffe000 0x300>,
+ <0xffffe600 0x100>;
+ };
+
+ mpddrc: mpddrc@ffffe800 {
+ compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+ reg = <0xffffe800 0x200>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+ clock-names = "ddrck", "mpddr";
+ };
+
+ smc: smc@ffffea00 {
+ compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+ reg = <0xffffea00 0x100>;
+ };
+
+ aic: interrupt-controller@fffff100 {
+ compatible = "microchip,sam9x60-aic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xfffff100 0x100>;
+ atmel,external-irqs = <31>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ pioA: gpio@fffff400 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <26>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <22>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "microchip,sam9x60-pmc", "syscon";
+ reg = <0xfffffc00 0x200>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+ clock-names = "td_slck", "md_slck", "main_xtal";
+ };
+
+ reset_controller: rstc@fffffe00 {
+ compatible = "microchip,sam9x60-rstc";
+ reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k 0>;
+ };
+
+ shutdown_controller: shdwc@fffffe10 {
+ compatible = "microchip,sam9x60-shdwc";
+ reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ atmel,wakeup-rtt-timer;
+ status = "disabled";
+ };
+
+ pit: timer@fffffe40 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffe40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+ };
+
+ clk32k: sckc@fffffe50 {
+ compatible = "microchip,sam9x60-sckc";
+ reg = <0xfffffe50 0x4>;
+ clocks = <&slow_xtal>;
+ #clock-cells = <1>;
+ };
+
+ gpbr: syscon@fffffe60 {
+ compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffe60 0x10>;
+ };
+
+ rtc: rtc@fffffea8 {
+ compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+ reg = <0xfffffea8 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k 0>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 565204816e34..2012b7407c60 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -300,6 +300,8 @@
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+ assigned-clock-rates = <480000000>;
status = "disabled";
};
@@ -309,6 +311,8 @@
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+ assigned-clock-rates = <480000000>;
status = "disabled";
};
@@ -615,6 +619,7 @@
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
#pwm-cells = <3>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ status = "disabled";
};
sfr: sfr@f8030000 {
@@ -884,9 +889,12 @@
clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
};
- secumod@fc040000 {
+ pioBU: secumod@fc040000 {
compatible = "atmel,sama5d2-secumod", "syscon";
reg = <0xfc040000 0x100>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
};
tdes@fc044000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index f770aace0efd..203d40be70a5 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1188,49 +1188,49 @@
usart0_clk: usart0_clk {
#clock-cells = <0>;
reg = <12>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <13>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
usart2_clk: usart2_clk {
#clock-cells = <0>;
reg = <14>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
usart3_clk: usart3_clk {
#clock-cells = <0>;
reg = <15>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
uart0_clk: uart0_clk {
#clock-cells = <0>;
reg = <16>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
twi0_clk: twi0_clk {
reg = <18>;
#clock-cells = <0>;
- atmel,clk-output-range = <0 16625000>;
+ atmel,clk-output-range = <0 41500000>;
};
twi1_clk: twi1_clk {
#clock-cells = <0>;
reg = <19>;
- atmel,clk-output-range = <0 16625000>;
+ atmel,clk-output-range = <0 41500000>;
};
twi2_clk: twi2_clk {
#clock-cells = <0>;
reg = <20>;
- atmel,clk-output-range = <0 16625000>;
+ atmel,clk-output-range = <0 41500000>;
};
mci0_clk: mci0_clk {
@@ -1246,19 +1246,19 @@
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <24>;
- atmel,clk-output-range = <0 133000000>;
+ atmel,clk-output-range = <0 166000000>;
};
spi1_clk: spi1_clk {
#clock-cells = <0>;
reg = <25>;
- atmel,clk-output-range = <0 133000000>;
+ atmel,clk-output-range = <0 166000000>;
};
tcb0_clk: tcb0_clk {
#clock-cells = <0>;
reg = <26>;
- atmel,clk-output-range = <0 133000000>;
+ atmel,clk-output-range = <0 166000000>;
};
pwm_clk: pwm_clk {
@@ -1269,7 +1269,7 @@
adc_clk: adc_clk {
#clock-cells = <0>;
reg = <29>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
dma0_clk: dma0_clk {
@@ -1300,13 +1300,13 @@
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <38>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <39>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
sha_clk: sha_clk {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index cf06a018ed0f..2470dd3fff25 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -36,13 +36,13 @@
can0_clk: can0_clk {
#clock-cells = <0>;
reg = <40>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
can1_clk: can1_clk {
#clock-cells = <0>;
reg = <41>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 1584035daf51..215802b8db30 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -22,6 +22,7 @@
tcb1_clk: tcb1_clk {
#clock-cells = <0>;
reg = <27>;
+ atmel,clk-output-range = <0 166000000>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 4316bdbdc25d..cb62adbd28ed 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -41,13 +41,13 @@
uart0_clk: uart0_clk {
#clock-cells = <0>;
reg = <16>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
uart1_clk: uart1_clk {
#clock-cells = <0>;
reg = <17>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
};
};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 33836990b102..c134154bcce8 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -39,11 +39,18 @@
};
};
+ timer@f0000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xf0000200 0x100>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&periph_clk>;
+ };
+
timer@f0000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
- clocks = <&twd_clk>;
+ clocks = <&periph_clk>;
};
gic: interrupt-controller@f0001000 {
@@ -110,14 +117,14 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -132,14 +139,14 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -154,14 +161,14 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -176,14 +183,14 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -194,10 +201,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
- interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -208,10 +215,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -222,10 +229,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
- interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -236,10 +243,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
- interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -250,10 +257,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
- interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
power-domains = <&pd_c5>;
status = "disabled";
@@ -262,8 +269,8 @@
mmcif: mmc@e6bd0000 {
compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
power-domains = <&pd_a3sp>;
reg-io-width = <4>;
@@ -317,9 +324,9 @@
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -330,8 +337,8 @@
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee120000 0x100>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
disable-wp;
@@ -342,8 +349,8 @@
sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee140000 0x100>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
disable-wp;
@@ -612,19 +619,25 @@
extal2_clk: extal2 {
compatible = "fixed-clock";
#clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
};
extcki_clk: extcki {
compatible = "fixed-clock";
#clock-cells = <0>;
+ /* This value can be overridden by the board. */
+ clock-frequency = <0>;
};
fsiack_clk: fsiack {
compatible = "fixed-clock";
#clock-cells = <0>;
+ /* This value can be overridden by the board. */
clock-frequency = <0>;
};
fsibck_clk: fsibck {
compatible = "fixed-clock";
#clock-cells = <0>;
+ /* This value can be overridden by the board. */
clock-frequency = <0>;
};
@@ -812,7 +825,7 @@
clock-div = <13>;
clock-mult = <1>;
};
- twd_clk: twd {
+ periph_clk: periph {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks SH73A0_CLK_Z>;
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 55fff4d44277..14d4d8617d75 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -6,6 +6,20 @@
#include <dt-bindings/clock/ste-ab8500.h>
/ {
+ /* Essential housekeeping hardware monitors */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&gpadc 0x02>, /* Battery temperature */
+ <&gpadc 0x03>, /* Main charger voltage */
+ <&gpadc 0x08>, /* Main battery voltage */
+ <&gpadc 0x09>, /* VBUS */
+ <&gpadc 0x0a>, /* Main charger current */
+ <&gpadc 0x0b>, /* USB charger current */
+ <&gpadc 0x0c>, /* Backup battery voltage */
+ <&gpadc 0x0d>, /* Die temperature */
+ <&gpadc 0x12>; /* Crystal temperature */
+ };
+
soc {
prcmu@80157000 {
ab8500 {
@@ -33,12 +47,84 @@
interrupt-names = "60S", "ALARM";
};
- ab8500-gpadc {
+ gpadc: ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
interrupts = <32 IRQ_TYPE_LEVEL_HIGH
39 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ /* GPADC channels */
+ bat_ctrl: channel@01 {
+ reg = <0x01>;
+ };
+ btemp_ball: channel@02 {
+ reg = <0x02>;
+ };
+ main_charger_v: channel@03 {
+ reg = <0x03>;
+ };
+ acc_detect1: channel@04 {
+ reg = <0x04>;
+ };
+ acc_detect2: channel@05 {
+ reg = <0x05>;
+ };
+ adc_aux1: channel@06 {
+ reg = <0x06>;
+ };
+ adc_aux2: channel@07 {
+ reg = <0x07>;
+ };
+ main_batt_v: channel@08 {
+ reg = <0x08>;
+ };
+ vbus_v: channel@09 {
+ reg = <0x09>;
+ };
+ main_charger_c: channel@0a {
+ reg = <0x0a>;
+ };
+ usb_charger_c: channel@0b {
+ reg = <0x0b>;
+ };
+ bk_bat_v: channel@0c {
+ reg = <0x0c>;
+ };
+ die_temp: channel@0d {
+ reg = <0x0d>;
+ };
+ usb_id: channel@0e {
+ reg = <0x0e>;
+ };
+ xtal_temp: channel@12 {
+ reg = <0x12>;
+ };
+ vbat_true_meas: channel@13 {
+ reg = <0x13>;
+ };
+ bat_ctrl_and_ibat: channel@1c {
+ reg = <0x1c>;
+ };
+ vbat_meas_and_ibat: channel@1d {
+ reg = <0x1d>;
+ };
+ vbat_true_meas_and_ibat: channel@1e {
+ reg = <0x1e>;
+ };
+ bat_temp_and_ibat: channel@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ ab8500_temp {
+ compatible = "stericsson,abx500-temp";
+ io-channels = <&gpadc 0x06>,
+ <&gpadc 0x07>;
+ io-channel-name = "aux1", "aux2";
};
ab8500_battery: ab8500_battery {
@@ -49,17 +135,31 @@
ab8500_fg {
compatible = "stericsson,ab8500-fg";
battery = <&ab8500_battery>;
+ io-channels = <&gpadc 0x08>;
+ io-channel-name = "main_bat_v";
};
ab8500_btemp {
compatible = "stericsson,ab8500-btemp";
battery = <&ab8500_battery>;
+ io-channels = <&gpadc 0x02>,
+ <&gpadc 0x01>;
+ io-channel-name = "btemp_ball",
+ "bat_ctrl";
};
ab8500_charger {
compatible = "stericsson,ab8500-charger";
battery = <&ab8500_battery>;
vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ io-channels = <&gpadc 0x03>,
+ <&gpadc 0x0a>,
+ <&gpadc 0x09>,
+ <&gpadc 0x0b>;
+ io-channel-name = "main_charger_v",
+ "main_charger_c",
+ "vbus_v",
+ "usb_charger_c";
};
ab8500_chargalg {
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
new file mode 100644
index 000000000000..c72aa250bf6f
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+ /* Essential housekeeping hardware monitors */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&gpadc 0x02>, /* Battery temperature */
+ <&gpadc 0x08>, /* Main battery voltage */
+ <&gpadc 0x09>, /* VBUS */
+ <&gpadc 0x0b>, /* Charger current */
+ <&gpadc 0x0c>; /* Backup battery voltage */
+ };
+
+ soc {
+ prcmu@80157000 {
+ ab8505 {
+ compatible = "stericsson,ab8505";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ab8500_clock: clock-controller {
+ compatible = "stericsson,ab8500-clk";
+ #clock-cells = <1>;
+ };
+
+ ab8505_gpio: ab8505-gpio {
+ compatible = "stericsson,ab8505-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ ab8500-rtc {
+ compatible = "stericsson,ab8500-rtc";
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+ 18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "60S", "ALARM";
+ };
+
+ gpadc: ab8500-gpadc {
+ compatible = "stericsson,ab8500-gpadc";
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+ 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ vddadc-supply = <&ab8500_ldo_adc_reg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ /* GPADC channels */
+ bat_ctrl: channel@01 {
+ reg = <0x01>;
+ };
+ btemp_ball: channel@02 {
+ reg = <0x02>;
+ };
+ acc_detect1: channel@04 {
+ reg = <0x04>;
+ };
+ acc_detect2: channel@05 {
+ reg = <0x05>;
+ };
+ adc_aux1: channel@06 {
+ reg = <0x06>;
+ };
+ adc_aux2: channel@07 {
+ reg = <0x07>;
+ };
+ main_batt_v: channel@08 {
+ reg = <0x08>;
+ };
+ vbus_v: channel@09 {
+ reg = <0x09>;
+ };
+ charger_c: channel@0b {
+ reg = <0x0b>;
+ };
+ bk_bat_v: channel@0c {
+ reg = <0x0c>;
+ };
+ usb_id: channel@0e {
+ reg = <0x0e>;
+ };
+ };
+
+ ab8500_battery: ab8500_battery {
+ status = "disabled";
+ thermistor-on-batctrl;
+ };
+
+ ab8500_fg {
+ status = "disabled";
+ compatible = "stericsson,ab8500-fg";
+ battery = <&ab8500_battery>;
+ io-channels = <&gpadc 0x08>;
+ io-channel-name = "main_bat_v";
+ };
+
+ ab8500_btemp {
+ status = "disabled";
+ compatible = "stericsson,ab8500-btemp";
+ battery = <&ab8500_battery>;
+ io-channels = <&gpadc 0x02>,
+ <&gpadc 0x01>;
+ io-channel-name = "btemp_ball",
+ "bat_ctrl";
+ };
+
+ ab8500_charger {
+ status = "disabled";
+ compatible = "stericsson,ab8500-charger";
+ battery = <&ab8500_battery>;
+ vddadc-supply = <&ab8500_ldo_adc_reg>;
+ io-channels = <&gpadc 0x09>,
+ <&gpadc 0x0b>;
+ io-channel-name = "vbus_v",
+ "usb_charger_c";
+ };
+
+ ab8500_chargalg {
+ status = "disabled";
+ compatible = "stericsson,ab8500-chargalg";
+ battery = <&ab8500_battery>;
+ };
+
+ ab8500_usb: ab8500_usb {
+ compatible = "stericsson,ab8500-usb";
+ interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+ 96 IRQ_TYPE_LEVEL_HIGH
+ 14 IRQ_TYPE_LEVEL_HIGH
+ 15 IRQ_TYPE_LEVEL_HIGH
+ 79 IRQ_TYPE_LEVEL_HIGH
+ 74 IRQ_TYPE_LEVEL_HIGH
+ 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ID_WAKEUP_R",
+ "ID_WAKEUP_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_ADP_PROBE_PLUG",
+ "USB_ADP_PROBE_UNPLUG";
+ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+ v-ape-supply = <&db8500_vape_reg>;
+ musb_1v8-supply = <&db8500_vsmps2_reg>;
+ clocks = <&prcmu_clk PRCMU_SYSCLK>;
+ clock-names = "sysclk";
+ };
+
+ ab8500-ponkey {
+ compatible = "stericsson,ab8500-poweron-key";
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+ 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+ };
+
+ ab8500-sysctrl {
+ compatible = "stericsson,ab8500-sysctrl";
+ };
+
+ ab8500-pwm {
+ compatible = "stericsson,ab8500-pwm";
+ clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+ clock-names = "intclk";
+ };
+
+ ab8500-debugfs {
+ compatible = "stericsson,ab8500-debug";
+ };
+
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+
+ V-AUD-supply = <&ab8500_ldo_audio_reg>;
+ V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+ V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+
+ clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+ clock-names = "audioclk";
+
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
+
+ ab8505-regulators {
+ compatible = "stericsson,ab8505-regulator";
+
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux4_reg: ab8500_ldo_aux4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux5_reg: ab8500_ldo_aux5 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <2790000>;
+ };
+
+ ab8500_ldo_aux6_reg: ab8500_ldo_aux6 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <2790000>;
+ };
+
+ // supply for v-intcore12; VINTCORE12 LDO
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ // supply for gpadc; ADC LDO
+ ab8500_ldo_adc_reg: ab8500_ldo_adc {
+ };
+
+ // supply for ab8500-vaudio; VAUDIO LDO
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ };
+
+ // supply for v-anamic1 VAMIC1 LDO
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ };
+
+ // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ };
+
+ // supply for v-aux8; VAUX8 LDO
+ ab8500_ldo_aux8_reg: ab8500_ldo_aux8 {
+ };
+
+ // supply for U8500 CSI/DSI; VANA LDO
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ };
+ };
+ };
+ };
+
+ sound {
+ stericsson,audio-codec = <&codec>;
+ clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+ clock-names = "sysclk", "ulpclk", "intclk";
+ };
+
+ mcde@a0350000 {
+ vana-supply = <&ab8500_ldo_ana_reg>;
+
+ dsi@a0351000 {
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ };
+ dsi@a0352000 {
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ };
+ dsi@a0353000 {
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi
new file mode 100644
index 000000000000..d309fad32229
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db8500.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+ cpus {
+ cpu@300 {
+ /* cpufreq controls */
+ operating-points = <998400 0
+ 800000 0
+ 400000 0
+ 200000 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi
new file mode 100644
index 000000000000..48bd8728ae27
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db8520.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+ cpus {
+ cpu@300 {
+ /* cpufreq controls */
+ operating-points = <1152000 0
+ 800000 0
+ 400000 0
+ 200000 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
new file mode 100644
index 000000000000..7bf7a2d34cbc
--- /dev/null
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Linaro Ltd.
+ */
+
+#include "ste-nomadik-pinctrl.dtsi"
+
+&pinctrl {
+ /* Settings for all UART default and sleep states */
+ uart0 {
+ u0_a_1_default: u0_a_1_default {
+ default_mux {
+ function = "u0";
+ groups = "u0_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+ ste,config = <&in_pu>;
+ };
+ default_cfg2 {
+ pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ u0_a_1_sleep: u0_a_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO1_AJ3"; /* RTS */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ pins = "GPIO3_AH3"; /* TXD */
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+ };
+
+ uart1 {
+ u1rxtx_a_1_default: u1rxtx_a_1_default {
+ default_mux {
+ function = "u1";
+ groups = "u1rxtx_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO4_AH6"; /* RXD */
+ ste,config = <&in_pu>;
+ };
+ default_cfg2 {
+ pins = "GPIO5_AG6"; /* TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ u1rxtx_a_1_sleep: u1rxtx_a_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO4_AH6"; /* RXD */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO5_AG6"; /* TXD */
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+
+ u1ctsrts_a_1_default: u1ctsrts_a_1_default {
+ default_mux {
+ function = "u1";
+ groups = "u1ctsrts_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO6_AF6"; /* CTS */
+ ste,config = <&in_pu>;
+ };
+ default_cfg2 {
+ pins = "GPIO7_AG5"; /* RTS */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO6_AF6"; /* CTS */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO7_AG5"; /* RTS */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ };
+ };
+
+ uart2 {
+ u2rxtx_c_1_default: u2rxtx_c_1_default {
+ default_mux {
+ function = "u2";
+ groups = "u2rxtx_c_1";
+ };
+ default_cfg1 {
+ pins = "GPIO29_W2"; /* RXD */
+ ste,config = <&in_pu>;
+ };
+ default_cfg2 {
+ pins = "GPIO30_W3"; /* TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ u2rxtx_c_1_sleep: u2rxtx_c_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO29_W2"; /* RXD */
+ ste,config = <&in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO30_W3"; /* TXD */
+ ste,config = <&out_wkup_pdis>;
+ };
+ };
+ };
+
+ /* Settings for all I2C default and sleep states */
+ i2c0 {
+ i2c0_a_1_default: i2c0_a_1_default {
+ default_mux {
+ function = "i2c0";
+ groups = "i2c0_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&in_nopull>;
+ };
+ };
+
+ i2c0_a_1_sleep: i2c0_a_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c1 {
+ i2c1_b_2_default: i2c1_b_2_default {
+ default_mux {
+ function = "i2c1";
+ groups = "i2c1_b_2";
+ };
+ default_cfg1 {
+ pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&in_nopull>;
+ };
+ };
+
+ i2c1_b_2_sleep: i2c1_b_2_sleep {
+ sleep_cfg1 {
+ pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c2 {
+ i2c2_b_2_default: i2c2_b_2_default {
+ default_mux {
+ function = "i2c2";
+ groups = "i2c2_b_2";
+ };
+ default_cfg1 {
+ pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&in_nopull>;
+ };
+ };
+
+ i2c2_b_2_sleep: i2c2_b_2_sleep {
+ sleep_cfg1 {
+ pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c3 {
+ i2c3_c_2_default: i2c3_c_2_default {
+ default_mux {
+ function = "i2c3";
+ groups = "i2c3_c_2";
+ };
+ default_cfg1 {
+ pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&in_nopull>;
+ };
+ };
+
+ i2c3_c_2_sleep: i2c3_c_2_sleep {
+ sleep_cfg1 {
+ pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /*
+ * Activating I2C4 will conflict with UART1 about the same pins so do not
+ * enable I2C4 and UART1 at the same time.
+ */
+ i2c4 {
+ i2c4_b_1_default: i2c4_b_1_default {
+ default_mux {
+ function = "i2c4";
+ groups = "i2c4_b_1";
+ };
+ default_cfg1 {
+ pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&in_nopull>;
+ };
+ };
+
+ i2c4_b_1_sleep: i2c4_b_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /* Settings for all MMC/SD/SDIO default and sleep states */
+ sdi0 {
+ /* This is the external SD card slot, 4 bits wide */
+ mc0_a_1_default: mc0_a_1_default {
+ default_mux {
+ function = "mc0";
+ groups = "mc0_a_1";
+ };
+ default_cfg1 {
+ pins =
+ "GPIO18_AC2", /* CMDDIR */
+ "GPIO19_AC1", /* DAT0DIR */
+ "GPIO20_AB4"; /* DAT2DIR */
+ ste,config = <&out_hi>;
+ };
+ default_cfg2 {
+ pins = "GPIO22_AA3"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg4 {
+ pins =
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ mc0_a_1_sleep: mc0_a_1_sleep {
+ sleep_cfg1 {
+ pins =
+ "GPIO18_AC2", /* CMDDIR */
+ "GPIO19_AC1", /* DAT0DIR */
+ "GPIO20_AB4"; /* DAT2DIR */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO22_AA3", /* FBCLK */
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ };
+
+ mc0_a_2_default: mc0_a_2_default {
+ default_mux {
+ function = "mc0";
+ groups = "mc0_a_2";
+ };
+ default_cfg1 {
+ pins = "GPIO22_AA3"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg2 {
+ pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg3 {
+ pins =
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ mc0_a_2_sleep: mc0_a_2_sleep {
+ sleep_cfg1 {
+ pins =
+ "GPIO22_AA3", /* FBCLK */
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi1 {
+ /* This is the WLAN SDIO 4 bits wide */
+ mc1_a_1_default: mc1_a_1_default {
+ default_mux {
+ function = "mc1";
+ groups = "mc1_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins = "GPIO209_AG15"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins =
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ mc1_a_1_sleep: mc1_a_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO209_AG15", /* FBCLK */
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+
+ mc1_a_2_default: mc1_a_2_default {
+ default_mux {
+ function = "mc1";
+ groups = "mc1_a_2";
+ };
+ default_cfg1 {
+ pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins =
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ mc1_a_2_sleep: mc1_a_2_sleep {
+ sleep_cfg1 {
+ pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi2 {
+ /* This is the eMMC 8 bits wide, usually PoP eMMC */
+ mc2_a_1_default: mc2_a_1_default {
+ default_mux {
+ function = "mc2";
+ groups = "mc2_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO128_A5"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins = "GPIO130_C8"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins =
+ "GPIO129_B4", /* CMD */
+ "GPIO131_A12", /* DAT0 */
+ "GPIO132_C10", /* DAT1 */
+ "GPIO133_B10", /* DAT2 */
+ "GPIO134_B9", /* DAT3 */
+ "GPIO135_A9", /* DAT4 */
+ "GPIO136_C7", /* DAT5 */
+ "GPIO137_A7", /* DAT6 */
+ "GPIO138_C5"; /* DAT7 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ mc2_a_1_sleep: mc2_a_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO128_A5"; /* CLK */
+ ste,config = <&out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO130_C8", /* FBCLK */
+ "GPIO129_B4"; /* CMD */
+ ste,config = <&in_wkup_pdis_en>;
+ };
+ sleep_cfg3 {
+ pins =
+ "GPIO131_A12", /* DAT0 */
+ "GPIO132_C10", /* DAT1 */
+ "GPIO133_B10", /* DAT2 */
+ "GPIO134_B9", /* DAT3 */
+ "GPIO135_A9", /* DAT4 */
+ "GPIO136_C7", /* DAT5 */
+ "GPIO137_A7", /* DAT6 */
+ "GPIO138_C5"; /* DAT7 */
+ ste,config = <&in_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi4 {
+ /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+ mc4_a_1_default: mc4_a_1_default {
+ default_mux {
+ function = "mc4";
+ groups = "mc4_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO203_AE23"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins = "GPIO202_AF25"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ pins =
+ "GPIO201_AF24", /* CMD */
+ "GPIO200_AH26", /* DAT0 */
+ "GPIO199_AH23", /* DAT1 */
+ "GPIO198_AG25", /* DAT2 */
+ "GPIO197_AH24", /* DAT3 */
+ "GPIO207_AJ23", /* DAT4 */
+ "GPIO206_AG24", /* DAT5 */
+ "GPIO205_AG23", /* DAT6 */
+ "GPIO204_AF23"; /* DAT7 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ mc4_a_1_sleep: mc4_a_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO203_AE23"; /* CLK */
+ ste,config = <&out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ pins =
+ "GPIO202_AF25", /* FBCLK */
+ "GPIO201_AF24", /* CMD */
+ "GPIO200_AH26", /* DAT0 */
+ "GPIO199_AH23", /* DAT1 */
+ "GPIO198_AG25", /* DAT2 */
+ "GPIO197_AH24", /* DAT3 */
+ "GPIO207_AJ23", /* DAT4 */
+ "GPIO206_AG24", /* DAT5 */
+ "GPIO205_AG23", /* DAT6 */
+ "GPIO204_AF23"; /* DAT7 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /*
+ * Multi-rate serial ports (MSPs) - MSP3 output is internal and
+ * cannot be muxed onto any pins.
+ */
+ msp0 {
+ msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default {
+ default_msp0_mux {
+ function = "msp0";
+ groups = "msp0txrx_a_1", "msp0tfstck_a_1";
+ };
+ default_msp0_cfg {
+ pins =
+ "GPIO12_AC4", /* TXD */
+ "GPIO15_AC3", /* RXD */
+ "GPIO13_AF3", /* TFS */
+ "GPIO14_AE3"; /* TCK */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ msp1 {
+ msp1txrx_a_1_default: msp1txrx_a_1_default {
+ default_mux {
+ function = "msp1";
+ groups = "msp1txrx_a_1", "msp1_a_1";
+ };
+ default_cfg1 {
+ pins = "GPIO33_AF2";
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ pins =
+ "GPIO34_AE1",
+ "GPIO35_AE2",
+ "GPIO36_AG2";
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ msp2 {
+ msp2_a_1_default: msp2_a_1_default {
+ /* MSP2 usually used for HDMI audio */
+ default_mux {
+ function = "msp2";
+ groups = "msp2_a_1";
+ };
+ default_cfg1 {
+ pins =
+ "GPIO193_AH27", /* TXD */
+ "GPIO194_AF27", /* TCK */
+ "GPIO195_AG28"; /* TFS */
+ ste,config = <&in_pd>;
+ };
+ default_cfg2 {
+ pins = "GPIO196_AG26"; /* RXD */
+ ste,config = <&out_lo>;
+ };
+ };
+ };
+
+ musb {
+ usb_a_1_default: usb_a_1_default {
+ default_mux {
+ function = "usb";
+ groups = "usb_a_1";
+ };
+ default_cfg1 {
+ pins =
+ "GPIO256_AF28", /* NXT */
+ "GPIO258_AD29", /* XCLK */
+ "GPIO259_AC29", /* DIR */
+ "GPIO260_AD28", /* DAT7 */
+ "GPIO261_AD26", /* DAT6 */
+ "GPIO262_AE26", /* DAT5 */
+ "GPIO263_AG29", /* DAT4 */
+ "GPIO264_AE27", /* DAT3 */
+ "GPIO265_AD27", /* DAT2 */
+ "GPIO266_AC28", /* DAT1 */
+ "GPIO267_AC27"; /* DAT0 */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg2 {
+ pins = "GPIO257_AE29"; /* STP */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ usb_a_1_sleep: usb_a_1_sleep {
+ sleep_cfg1 {
+ pins =
+ "GPIO256_AF28", /* NXT */
+ "GPIO258_AD29", /* XCLK */
+ "GPIO259_AC29"; /* DIR */
+ ste,config = <&slpm_wkup_pdis_en>;
+ };
+ sleep_cfg2 {
+ pins = "GPIO257_AE29"; /* STP */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ pins =
+ "GPIO260_AD28", /* DAT7 */
+ "GPIO261_AD26", /* DAT6 */
+ "GPIO262_AE26", /* DAT5 */
+ "GPIO263_AG29", /* DAT4 */
+ "GPIO264_AE27", /* DAT3 */
+ "GPIO265_AD27", /* DAT2 */
+ "GPIO266_AC28", /* DAT1 */
+ "GPIO267_AC27"; /* DAT0 */
+ ste,config = <&slpm_in_wkup_pdis_en>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index bda454d12150..6671f74c9f03 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -14,6 +14,22 @@
#address-cells = <1>;
#size-cells = <1>;
+ /* This stablilizes the device enumeration */
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ };
+
chosen {
};
@@ -36,11 +52,6 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x300>;
- /* cpufreq controls */
- operating-points = <998400 0
- 800000 0
- 400000 0
- 200000 0>;
clocks = <&prcmu_clk PRCMU_ARMSS>;
clock-names = "cpu";
clock-latency = <20000>;
@@ -93,7 +104,7 @@
soc {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "stericsson,db8500";
+ compatible = "stericsson,db8500", "simple-bus";
interrupt-parent = <&intc>;
ranges;
@@ -324,7 +335,7 @@
};
rtc@80154000 {
- compatible = "arm,rtc-pl031", "arm,primecell";
+ compatible = "arm,pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -638,7 +649,7 @@
};
};
- i2c@80004000 {
+ i2c0: i2c@80004000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -651,9 +662,11 @@
clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- i2c@80122000 {
+ i2c1: i2c@80122000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -667,9 +680,11 @@
clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- i2c@80128000 {
+ i2c2: i2c@80128000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -683,9 +698,11 @@
clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- i2c@80110000 {
+ i2c3: i2c@80110000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -699,9 +716,11 @@
clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- i2c@8012a000 {
+ i2c4: i2c@8012a000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -715,9 +734,11 @@
clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- spi@80002000 {
+ ssp0: spi@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -729,9 +750,11 @@
<&dma 8 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- spi@80003000 {
+ ssp1: spi@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -743,9 +766,11 @@
<&dma 9 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- spi@8011a000 {
+ spi0: spi@8011a000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x8011a000 0x1000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -758,9 +783,11 @@
<&dma 0 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- spi@80112000 {
+ spi1: spi@80112000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80112000 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -773,9 +800,11 @@
<&dma 35 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- spi@80111000 {
+ spi2: spi@80111000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80111000 0x1000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -788,9 +817,11 @@
<&dma 33 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- spi@80129000 {
+ spi3: spi@80129000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80129000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
@@ -803,9 +834,11 @@
<&dma 40 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
};
- ux500_serial0: uart@80120000 {
+ serial0: uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -820,7 +853,7 @@
status = "disabled";
};
- ux500_serial1: uart@80121000 {
+ serial1: uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -835,7 +868,7 @@
status = "disabled";
};
- ux500_serial2: uart@80007000 {
+ serial2: uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
deleted file mode 100644
index 95cf38a008e9..000000000000
--- a/arch/arm/boot/dts/ste-href-ab8505.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Linaro Ltd.
- */
-
-/ {
- soc {
- prcmu@80157000 {
- ab8505 {
- ab8505-gpio {
- /* Hog a few default settings */
- pinctrl-names = "default";
- pinctrl-0 = <&gpio2_default_mode>,
- <&gpio10_default_mode>,
- <&gpio11_default_mode>,
- <&gpio13_default_mode>,
- <&gpio34_default_mode>,
- <&gpio50_default_mode>,
- <&pwm_default_mode>,
- <&adi2_default_mode>,
- <&modsclsda_default_mode>,
- <&resethw_default_mode>,
- <&service_default_mode>;
-
- /*
- * Pins 2, 10, 11, 13, 34 and 50
- * are muxed in as GPIO, and configured as INPUT PULL DOWN
- */
- gpio2 {
- gpio2_default_mode: gpio2_default {
- default_mux {
- function = "gpio";
- groups = "gpio2_a_1";
- };
- default_cfg {
- pins = "GPIO2_R5";
- input-enable;
- bias-pull-down;
- };
- };
- };
- gpio10 {
- gpio10_default_mode: gpio10_default {
- default_mux {
- function = "gpio";
- groups = "gpio10_d_1";
- };
- default_cfg {
- pins = "GPIO10_B16";
- input-enable;
- bias-pull-down;
- };
- };
- };
- gpio11 {
- gpio11_default_mode: gpio11_default {
- default_mux {
- function = "gpio";
- groups = "gpio11_d_1";
- };
- default_cfg {
- pins = "GPIO11_B17";
- input-enable;
- bias-pull-down;
- };
- };
- };
- gpio13 {
- gpio13_default_mode: gpio13_default {
- default_mux {
- function = "gpio";
- groups = "gpio13_d_1";
- };
- default_cfg {
- pins = "GPIO13_D17";
- input-enable;
- bias-disable;
- };
- };
- };
- gpio34 {
- gpio34_default_mode: gpio34_default {
- default_mux {
- function = "gpio";
- groups = "gpio34_a_1";
- };
- default_cfg {
- pins = "GPIO34_H14";
- input-enable;
- bias-pull-down;
- };
- };
- };
- gpio50 {
- gpio50_default_mode: gpio50_default {
- default_mux {
- function = "gpio";
- groups = "gpio50_d_1";
- };
- default_cfg {
- pins = "GPIO50_L4";
- input-enable;
- bias-disable;
- };
- };
- };
- /* This sets up the PWM pin 14 */
- pwm {
- pwm_default_mode: pwm_default {
- default_mux {
- function = "pwmout";
- groups = "pwmout1_d_1";
- };
- default_cfg {
- pins = "GPIO14_C16";
- input-enable;
- bias-pull-down;
- };
- };
- };
- /* This sets up audio interface 2 */
- adi2 {
- adi2_default_mode: adi2_default {
- default_mux {
- function = "adi2";
- groups = "adi2_d_1";
- };
- default_cfg {
- pins = "GPIO17_P2",
- "GPIO18_N3",
- "GPIO19_T1",
- "GPIO20_P3";
- input-enable;
- bias-pull-down;
- };
- };
- };
- /* Modem I2C setup (SCL and SDA pins) */
- modsclsda {
- modsclsda_default_mode: modsclsda_default {
- default_mux {
- function = "modsclsda";
- groups = "modsclsda_d_1";
- };
- default_cfg {
- pins = "GPIO40_J15",
- "GPIO41_J14";
- input-enable;
- bias-pull-down;
- };
- };
- };
- resethw {
- resethw_default_mode: resethw_default {
- default_mux {
- function = "resethw";
- groups = "resethw_d_1";
- };
- default_cfg {
- pins = "GPIO52_D16";
- input-enable;
- bias-pull-down;
- };
- };
- };
- service {
- service_default_mode: service_default {
- default_mux {
- function = "service";
- groups = "service_d_1";
- };
- default_cfg {
- pins = "GPIO53_D15";
- input-enable;
- bias-pull-down;
- };
- };
- };
- /*
- * Clock output pins associated with regulators.
- */
- sysclkreq2 {
- sysclkreq2_default_mode: sysclkreq2_default {
- default_mux {
- function = "sysclkreq";
- groups = "sysclkreq2_d_1";
- };
- default_cfg {
- pins = "GPIO1_N4";
- input-enable;
- bias-disable;
- };
- };
- sysclkreq2_sleep_mode: sysclkreq2_sleep {
- default_mux {
- function = "gpio";
- groups = "gpio1_a_1";
- };
- default_cfg {
- pins = "GPIO1_N4";
- input-enable;
- bias-pull-down;
- };
- };
- };
- sysclkreq4 {
- sysclkreq4_default_mode: sysclkreq4_default {
- default_mux {
- function = "sysclkreq";
- groups = "sysclkreq4_d_1";
- };
- default_cfg {
- pins = "GPIO3_P5";
- input-enable;
- bias-disable;
- };
- };
- sysclkreq4_sleep_mode: sysclkreq4_sleep {
- default_mux {
- function = "gpio";
- groups = "gpio3_a_1";
- };
- default_cfg {
- pins = "GPIO3_P5";
- input-enable;
- bias-pull-down;
- };
- };
- };
- };
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 2c382d274ff6..434fa6baf71f 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -3,212 +3,11 @@
* Copyright 2013 Linaro Ltd.
*/
-#include "ste-nomadik-pinctrl.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
/ {
soc {
pinctrl {
- /* Settings for all UART default and sleep states */
- uart0 {
- uart0_default_mode: uart0_default {
- default_mux {
- function = "u0";
- groups = "u0_a_1";
- };
- default_cfg1 {
- pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
- ste,config = <&out_hi>;
- };
- };
-
- uart0_sleep_mode: uart0_sleep {
- sleep_cfg1 {
- pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
- ste,config = <&slpm_in_wkup_pdis>;
- };
-
- sleep_cfg2 {
- pins = "GPIO1_AJ3"; /* RTS */
- ste,config = <&slpm_out_hi_wkup_pdis>;
- };
-
- sleep_cfg3 {
- pins = "GPIO3_AH3"; /* TXD */
- ste,config = <&slpm_out_wkup_pdis>;
- };
- };
- };
-
- uart1 {
- uart1_default_mode: uart1_default {
- default_mux {
- function = "u1";
- groups = "u1rxtx_a_1";
- };
- default_cfg1 {
- pins = "GPIO4_AH6"; /* RXD */
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO5_AG6"; /* TXD */
- ste,config = <&out_hi>;
- };
- };
-
- uart1_sleep_mode: uart1_sleep {
- sleep_cfg1 {
- pins = "GPIO4_AH6"; /* RXD */
- ste,config = <&slpm_in_wkup_pdis>;
- };
-
- sleep_cfg2 {
- pins = "GPIO5_AG6"; /* TXD */
- ste,config = <&slpm_out_wkup_pdis>;
- };
- };
- };
-
- uart2 {
- uart2_default_mode: uart2_default {
- default_mux {
- function = "u2";
- groups = "u2rxtx_c_1";
- };
- default_cfg1 {
- pins = "GPIO29_W2"; /* RXD */
- ste,config = <&in_pu>;
- };
-
- default_cfg2 {
- pins = "GPIO30_W3"; /* TXD */
- ste,config = <&out_hi>;
- };
- };
-
- uart2_sleep_mode: uart2_sleep {
- sleep_cfg1 {
- pins = "GPIO29_W2"; /* RXD */
- ste,config = <&in_wkup_pdis>;
- };
-
- sleep_cfg2 {
- pins = "GPIO30_W3"; /* TXD */
- ste,config = <&out_wkup_pdis>;
- };
- };
- };
-
- /* Settings for all I2C default and sleep states */
- i2c0 {
- i2c0_default_mode: i2c_default {
- default_mux {
- function = "i2c0";
- groups = "i2c0_a_1";
- };
- default_cfg1 {
- pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c0_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- i2c1 {
- i2c1_default_mode: i2c_default {
- default_mux {
- function = "i2c1";
- groups = "i2c1_b_2";
- };
- default_cfg1 {
- pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c1_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- i2c2 {
- i2c2_default_mode: i2c_default {
- default_mux {
- function = "i2c2";
- groups = "i2c2_b_2";
- };
- default_cfg1 {
- pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c2_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- i2c3 {
- i2c3_default_mode: i2c_default {
- default_mux {
- function = "i2c3";
- groups = "i2c3_c_2";
- };
- default_cfg1 {
- pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c3_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- /*
- * Activating I2C4 will conflict with UART1 about the same pins so do not
- * enable I2C4 and UART1 at the same time.
- */
- i2c4 {
- i2c4_default_mode: i2c_default {
- default_mux {
- function = "i2c4";
- groups = "i2c4_b_1";
- };
- default_cfg1 {
- pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
- ste,config = <&in_pu>;
- };
- };
-
- i2c4_sleep_mode: i2c_sleep {
- sleep_cfg1 {
- pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
/* Settings for all SPI default and sleep states */
spi2 {
spi2_default_mode: spi_default {
@@ -270,335 +69,6 @@
};
};
- /* Settings for all MMC/SD/SDIO default and sleep states */
- sdi0 {
- /* This is the external SD card slot, 4 bits wide */
- sdi0_default_mode: sdi0_default {
- default_mux {
- function = "mc0";
- groups = "mc0_a_1";
- };
- default_cfg1 {
- pins =
- "GPIO18_AC2", /* CMDDIR */
- "GPIO19_AC1", /* DAT0DIR */
- "GPIO20_AB4"; /* DAT2DIR */
- ste,config = <&out_hi>;
- };
- default_cfg2 {
- pins = "GPIO22_AA3"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins = "GPIO23_AA4"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg4 {
- pins =
- "GPIO24_AB2", /* CMD */
- "GPIO25_Y4", /* DAT0 */
- "GPIO26_Y2", /* DAT1 */
- "GPIO27_AA2", /* DAT2 */
- "GPIO28_AA1"; /* DAT3 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi0_sleep_mode: sdi0_sleep {
- sleep_cfg1 {
- pins =
- "GPIO18_AC2", /* CMDDIR */
- "GPIO19_AC1", /* DAT0DIR */
- "GPIO20_AB4"; /* DAT2DIR */
- ste,config = <&slpm_out_hi_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO22_AA3", /* FBCLK */
- "GPIO24_AB2", /* CMD */
- "GPIO25_Y4", /* DAT0 */
- "GPIO26_Y2", /* DAT1 */
- "GPIO27_AA2", /* DAT2 */
- "GPIO28_AA1"; /* DAT3 */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- sleep_cfg3 {
- pins = "GPIO23_AA4"; /* CLK */
- ste,config = <&slpm_out_lo_wkup_pdis>;
- };
- };
- };
-
- sdi1 {
- /* This is the WLAN SDIO 4 bits wide */
- sdi1_default_mode: sdi1_default {
- default_mux {
- function = "mc1";
- groups = "mc1_a_1";
- };
- default_cfg1 {
- pins = "GPIO208_AH16"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins = "GPIO209_AG15"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins =
- "GPIO210_AJ15", /* CMD */
- "GPIO211_AG14", /* DAT0 */
- "GPIO212_AF13", /* DAT1 */
- "GPIO213_AG13", /* DAT2 */
- "GPIO214_AH15"; /* DAT3 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi1_sleep_mode: sdi1_sleep {
- sleep_cfg1 {
- pins = "GPIO208_AH16"; /* CLK */
- ste,config = <&slpm_out_lo_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO209_AG15", /* FBCLK */
- "GPIO210_AJ15", /* CMD */
- "GPIO211_AG14", /* DAT0 */
- "GPIO212_AF13", /* DAT1 */
- "GPIO213_AG13", /* DAT2 */
- "GPIO214_AH15"; /* DAT3 */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- sdi2 {
- /* This is the eMMC 8 bits wide, usually PoP eMMC */
- sdi2_default_mode: sdi2_default {
- default_mux {
- function = "mc2";
- groups = "mc2_a_1";
- };
- default_cfg1 {
- pins = "GPIO128_A5"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins = "GPIO130_C8"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins =
- "GPIO129_B4", /* CMD */
- "GPIO131_A12", /* DAT0 */
- "GPIO132_C10", /* DAT1 */
- "GPIO133_B10", /* DAT2 */
- "GPIO134_B9", /* DAT3 */
- "GPIO135_A9", /* DAT4 */
- "GPIO136_C7", /* DAT5 */
- "GPIO137_A7", /* DAT6 */
- "GPIO138_C5"; /* DAT7 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi2_sleep_mode: sdi2_sleep {
- sleep_cfg1 {
- pins = "GPIO128_A5"; /* CLK */
- ste,config = <&out_lo_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO130_C8", /* FBCLK */
- "GPIO129_B4"; /* CMD */
- ste,config = <&in_wkup_pdis_en>;
- };
- sleep_cfg3 {
- pins =
- "GPIO131_A12", /* DAT0 */
- "GPIO132_C10", /* DAT1 */
- "GPIO133_B10", /* DAT2 */
- "GPIO134_B9", /* DAT3 */
- "GPIO135_A9", /* DAT4 */
- "GPIO136_C7", /* DAT5 */
- "GPIO137_A7", /* DAT6 */
- "GPIO138_C5"; /* DAT7 */
- ste,config = <&in_wkup_pdis>;
- };
- };
- };
-
- sdi4 {
- /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
- sdi4_default_mode: sdi4_default {
- default_mux {
- function = "mc4";
- groups = "mc4_a_1";
- };
- default_cfg1 {
- pins = "GPIO203_AE23"; /* CLK */
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins = "GPIO202_AF25"; /* FBCLK */
- ste,config = <&in_nopull>;
- };
- default_cfg3 {
- pins =
- "GPIO201_AF24", /* CMD */
- "GPIO200_AH26", /* DAT0 */
- "GPIO199_AH23", /* DAT1 */
- "GPIO198_AG25", /* DAT2 */
- "GPIO197_AH24", /* DAT3 */
- "GPIO207_AJ23", /* DAT4 */
- "GPIO206_AG24", /* DAT5 */
- "GPIO205_AG23", /* DAT6 */
- "GPIO204_AF23"; /* DAT7 */
- ste,config = <&in_pu>;
- };
- };
-
- sdi4_sleep_mode: sdi4_sleep {
- sleep_cfg1 {
- pins = "GPIO203_AE23"; /* CLK */
- ste,config = <&out_lo_wkup_pdis>;
- };
- sleep_cfg2 {
- pins =
- "GPIO202_AF25", /* FBCLK */
- "GPIO201_AF24", /* CMD */
- "GPIO200_AH26", /* DAT0 */
- "GPIO199_AH23", /* DAT1 */
- "GPIO198_AG25", /* DAT2 */
- "GPIO197_AH24", /* DAT3 */
- "GPIO207_AJ23", /* DAT4 */
- "GPIO206_AG24", /* DAT5 */
- "GPIO205_AG23", /* DAT6 */
- "GPIO204_AF23"; /* DAT7 */
- ste,config = <&slpm_in_wkup_pdis>;
- };
- };
- };
-
- /*
- * Multi-rate serial ports (MSPs) - MSP3 output is internal and
- * cannot be muxed onto any pins.
- */
- msp0 {
- msp0_default_mode: msp0_default {
- default_msp0_mux {
- function = "msp0";
- groups = "msp0txrx_a_1", "msp0tfstck_a_1";
- };
- default_msp0_cfg {
- pins =
- "GPIO12_AC4", /* TXD */
- "GPIO15_AC3", /* RXD */
- "GPIO13_AF3", /* TFS */
- "GPIO14_AE3"; /* TCK */
- ste,config = <&in_nopull>;
- };
- };
- };
-
- msp1 {
- msp1_default_mode: msp1_default {
- default_mux {
- function = "msp1";
- groups = "msp1txrx_a_1", "msp1_a_1";
- };
- default_cfg1 {
- pins = "GPIO33_AF2";
- ste,config = <&out_lo>;
- };
- default_cfg2 {
- pins =
- "GPIO34_AE1",
- "GPIO35_AE2",
- "GPIO36_AG2";
- ste,config = <&in_nopull>;
- };
-
- };
- };
-
- msp2 {
- msp2_default_mode: msp2_default {
- /* MSP2 usually used for HDMI audio */
- default_mux {
- function = "msp2";
- groups = "msp2_a_1";
- };
- default_cfg1 {
- pins =
- "GPIO193_AH27", /* TXD */
- "GPIO194_AF27", /* TCK */
- "GPIO195_AG28"; /* TFS */
- ste,config = <&in_pd>;
- };
- default_cfg2 {
- pins = "GPIO196_AG26"; /* RXD */
- ste,config = <&out_lo>;
- };
- };
- };
-
-
- musb {
- musb_default_mode: musb_default {
- default_mux {
- function = "usb";
- groups = "usb_a_1";
- };
- default_cfg1 {
- pins =
- "GPIO256_AF28", /* NXT */
- "GPIO258_AD29", /* XCLK */
- "GPIO259_AC29", /* DIR */
- "GPIO260_AD28", /* DAT7 */
- "GPIO261_AD26", /* DAT6 */
- "GPIO262_AE26", /* DAT5 */
- "GPIO263_AG29", /* DAT4 */
- "GPIO264_AE27", /* DAT3 */
- "GPIO265_AD27", /* DAT2 */
- "GPIO266_AC28", /* DAT1 */
- "GPIO267_AC27"; /* DAT0 */
- ste,config = <&in_nopull>;
- };
- default_cfg2 {
- pins = "GPIO257_AE29"; /* STP */
- ste,config = <&out_hi>;
- };
- };
-
- musb_sleep_mode: musb_sleep {
- sleep_cfg1 {
- pins =
- "GPIO256_AF28", /* NXT */
- "GPIO258_AD29", /* XCLK */
- "GPIO259_AC29"; /* DIR */
- ste,config = <&slpm_wkup_pdis_en>;
- };
- sleep_cfg2 {
- pins = "GPIO257_AE29"; /* STP */
- ste,config = <&slpm_out_hi_wkup_pdis>;
- };
- sleep_cfg3 {
- pins =
- "GPIO260_AD28", /* DAT7 */
- "GPIO261_AD26", /* DAT6 */
- "GPIO262_AE26", /* DAT5 */
- "GPIO263_AG29", /* DAT4 */
- "GPIO264_AE27", /* DAT3 */
- "GPIO265_AD27", /* DAT2 */
- "GPIO266_AC28", /* DAT1 */
- "GPIO267_AC27"; /* DAT0 */
- ste,config = <&slpm_in_wkup_pdis_en>;
- };
- };
- };
-
mcde {
lcd_default_mode: lcd_default {
default_mux1 {
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
new file mode 100644
index 000000000000..e024520f4d47
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+ soc {
+ i2c@80128000 {
+ lsm303dlh@18 {
+ /* Accelerometer */
+ compatible = "st,lsm303dlh-accel";
+ st,drdy-int-pin = <1>;
+ drive-open-drain;
+ reg = <0x18>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_tvk_mode>;
+ /*
+ * These interrupts cannot be used: the other component
+ * ST-Micro L3D4200D gyro that is connected to the same lines
+ * cannot set its DRDY line to open drain, so it cannot be
+ * shared with other peripherals. The should be defined for
+ * the falling edge if they could be wired together.
+ *
+ * interrupts-extended =
+ * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+ * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+ */
+ };
+ lsm303dlh@1e {
+ /* Magnetometer */
+ compatible = "st,lsm303dlh-magn";
+ reg = <0x1e>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ /*
+ * These interrupts cannot be used: the other component
+ * ST-Micro L3D4200D gyro that is connected to the same lines
+ * cannot set its DRDY line to open drain, so it cannot be
+ * shared with other peripherals. The should be defined for
+ * the falling edge if they could be wired together.
+ *
+ * interrupts-extended =
+ * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+ * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+ */
+ };
+ lis331dl@1c {
+ /* Accelerometer */
+ compatible = "st,lis331dl-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x1c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_tvk_mode>;
+ interrupt-parent = <&gpio2>;
+ /* INT2 would need to be open drain */
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+ <19 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+ mcde@a0350000 {
+ status = "okay";
+
+ dsi@a0351000 {
+ panel {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
new file mode 100644
index 000000000000..cb3677f0a1cb
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+ soc {
+ i2c@80128000 {
+ /* Marked:
+ * 129
+ * M35
+ * L3GD20
+ */
+ l3gd20@6a {
+ /* Gyroscope */
+ compatible = "st,l3gd20";
+ status = "disabled";
+ st,drdy-int-pin = <1>;
+ drive-open-drain;
+ reg = <0x6a>; // 0x6a or 0x6b
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ };
+ /*
+ * Marked:
+ * 2122
+ * C3H
+ * DQEEE
+ * LIS3DH?
+ */
+ lis3dh@18 {
+ /* Accelerometer */
+ compatible = "st,lis3dh-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x18>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_tvk_mode>;
+ };
+ };
+
+ mcde@a0350000 {
+ status = "okay";
+
+ dsi@a0351000 {
+ panel {
+ compatible = "sony,acx424akp";
+ reg = <0>;
+ vddi-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 3bafd26b4824..e1dbfae22595 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -2,7 +2,7 @@
/*
* Copyright 2012 ST-Ericsson AB
*
- * Device Tree for the TVK1281618 UIB
+ * Device Tree for the TVK1281618 family of UIBs
*/
#include <dt-bindings/interrupt-controller/irq.h>
@@ -81,62 +81,8 @@
};
};
};
- /* Sensors mounted on this board variant */
+ /* Sensors mounted on all board variants */
i2c@80128000 {
- lsm303dlh@18 {
- /* Accelerometer */
- compatible = "st,lsm303dlh-accel";
- st,drdy-int-pin = <1>;
- drive-open-drain;
- reg = <0x18>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&accel_tvk_mode>;
- /*
- * These interrupts cannot be used: the other component
- * ST-Micro L3D4200D gyro that is connected to the same lines
- * cannot set its DRDY line to open drain, so it cannot be
- * shared with other peripherals. The should be defined for
- * the falling edge if they could be wired together.
- *
- * interrupts-extended =
- * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
- * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
- */
- };
- lsm303dlh@1e {
- /* Magnetometer */
- compatible = "st,lsm303dlh-magn";
- reg = <0x1e>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- /*
- * These interrupts cannot be used: the other component
- * ST-Micro L3D4200D gyro that is connected to the same lines
- * cannot set its DRDY line to open drain, so it cannot be
- * shared with other peripherals. The should be defined for
- * the falling edge if they could be wired together.
- *
- * interrupts-extended =
- * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
- * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
- */
- };
- lis331dl@1c {
- /* Accelerometer */
- compatible = "st,lis331dl-accel";
- st,drdy-int-pin = <1>;
- reg = <0x1c>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&accel_tvk_mode>;
- interrupt-parent = <&gpio2>;
- /* INT2 would need to be open drain */
- interrupts = <18 IRQ_TYPE_EDGE_RISING>,
- <19 IRQ_TYPE_EDGE_RISING>;
- };
ak8974@f {
/* Magnetometer */
compatible = "asahi-kasei,ak8974";
@@ -268,18 +214,5 @@
};
};
};
-
- mcde@a0350000 {
- status = "okay";
-
- dsi@a0351000 {
- panel {
- compatible = "samsung,s6d16d0";
- reg = <0>;
- vdd1-supply = <&ab8500_ldo_aux1_reg>;
- reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
- };
- };
};
};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4f6acbd8c040..33e3b0b3c53d 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -4,7 +4,6 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
-#include "ste-dbx5x0.dtsi"
#include "ste-href-family-pinctrl.dtsi"
/ {
@@ -16,41 +15,44 @@
soc {
uart@80120000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart1_default_mode>;
- pinctrl-1 = <&uart1_sleep_mode>;
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
};
uart@80007000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart2_default_mode>;
- pinctrl-1 = <&uart2_sleep_mode>;
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
status = "okay";
};
i2c@80004000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c0_default_mode>;
- pinctrl-1 = <&i2c0_sleep_mode>;
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+ status = "okay";
};
i2c@80122000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c1_default_mode>;
- pinctrl-1 = <&i2c1_sleep_mode>;
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
+ status = "okay";
};
i2c@80128000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c2_default_mode>;
- pinctrl-1 = <&i2c2_sleep_mode>;
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+ status = "okay";
lp5521@33 {
compatible = "national,lp5521";
reg = <0x33>;
@@ -96,8 +98,9 @@
i2c@80110000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c3_default_mode>;
- pinctrl-1 = <&i2c3_sleep_mode>;
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+ status = "okay";
};
/* ST6G3244ME level translator for 1.8/2.9 V */
@@ -132,8 +135,8 @@
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi0_default_mode>;
- pinctrl-1 = <&sdi0_sleep_mode>;
+ pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
status = "okay";
};
@@ -145,8 +148,8 @@
bus-width = <4>;
non-removable;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi1_default_mode>;
- pinctrl-1 = <&sdi1_sleep_mode>;
+ pinctrl-0 = <&mc1_a_1_default>;
+ pinctrl-1 = <&mc1_a_1_sleep>;
status = "okay";
};
@@ -160,8 +163,8 @@
non-removable;
vmmc-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi2_default_mode>;
- pinctrl-1 = <&sdi2_sleep_mode>;
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
status = "okay";
};
@@ -175,27 +178,27 @@
non-removable;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi4_default_mode>;
- pinctrl-1 = <&sdi4_sleep_mode>;
+ pinctrl-0 = <&mc4_a_1_default>;
+ pinctrl-1 = <&mc4_a_1_sleep>;
status = "okay";
};
msp0: msp@80123000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp0_default_mode>;
+ pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
status = "okay";
};
msp1: msp@80124000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp1_default_mode>;
+ pinctrl-0 = <&msp1txrx_a_1_default>;
status = "okay";
};
msp2: msp@80117000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp2_default_mode>;
+ pinctrl-0 = <&msp2_a_1_default>;
};
msp3: msp@80125000 {
@@ -209,8 +212,8 @@
ab8500_usb {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
};
ab8500-regulators {
@@ -257,6 +260,14 @@
};
};
+ pinctrl {
+ sdi0 {
+ sdi0_default_mode: sdi0_default {
+ /* Some boards set additional settings here */
+ };
+ };
+ };
+
mcde@a0350000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_default_mode>;
diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts
new file mode 100644
index 000000000000..f8c0c1e6aa04
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href520-tvk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the HREF520 version with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-db8520.dtsi"
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618-r3.dtsi"
+
+/ {
+ model = "ST-Ericsson HREF520 and TVK1281618 UIB";
+ compatible = "st-ericsson,href520", "st-ericsson,u8500";
+
+ soc {
+ vmmci: regulator-gpio {
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index b78be5f4c212..8ce6b723abf2 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -4,8 +4,7 @@
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-db8500.dtsi"
#include "ste-hrefprev60.dtsi"
#include "ste-href-stuib.dtsi"
@@ -13,13 +12,6 @@
model = "ST-Ericsson HREF (pre-v60) and ST UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 60eed262d920..142f5475521f 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -4,17 +4,11 @@
*/
/dts-v1/;
+#include "ste-db8500.dtsi"
#include "ste-hrefprev60.dtsi"
-#include "ste-href-tvk1281618.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
/ {
model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index a036defdf164..115495de8612 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -5,7 +5,6 @@
* Device Tree for the HREF+ prior to the v60 variant.
*/
-#include "ste-dbx5x0.dtsi"
#include "ste-href-ab8500.dtsi"
#include "ste-href.dtsi"
@@ -58,6 +57,7 @@
*/
pinctrl-names = "default";
pinctrl-0 = <&ssp0_hrefprev60_mode>;
+ status = "okay";
};
// External Micro SD slot
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 9be513aad549..1316886e6bcb 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -6,8 +6,7 @@
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-db8500.dtsi"
#include "ste-hrefv60plus.dtsi"
#include "ste-href-stuib.dtsi"
@@ -15,13 +14,6 @@
model = "ST-Ericsson HREF (v60+) and ST UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index 73ea3100f186..5d4b8245f02c 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -6,17 +6,11 @@
*/
/dts-v1/;
+#include "ste-db8500.dtsi"
#include "ste-hrefv60plus.dtsi"
-#include "ste-href-tvk1281618.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
/ {
model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index aece8eb2924f..05b4fbbba57f 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
* Copyright 2012 ST-Ericsson AB
*/
-#include "ste-dbx5x0.dtsi"
#include "ste-href-ab8500.dtsi"
#include "ste-href.dtsi"
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
index 5673a1113aef..bfdb5d9a014f 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -25,6 +25,11 @@
ste,output = <OUTPUT_LOW>;
};
+ gpio_in_nopull: gpio_input_nopull {
+ ste,gpio = <GPIOMODE_ENABLED>;
+ ste,input = <INPUT_NOPULL>;
+ };
+
gpio_in_pu: gpio_input_pull_up {
ste,gpio = <GPIOMODE_ENABLED>;
ste,input = <INPUT_PULLUP>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index efbc4467b8b7..be90e73c923e 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -4,7 +4,7 @@
*/
/dts-v1/;
-#include "ste-dbx5x0.dtsi"
+#include "ste-db8500.dtsi"
#include "ste-href-ab8500.dtsi"
#include "ste-href-family-pinctrl.dtsi"
@@ -12,13 +12,6 @@
model = "Calao Systems Snowball platform with device tree";
compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
@@ -156,19 +149,19 @@
msp0: msp@80123000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp0_default_mode>;
+ pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
status = "okay";
};
msp1: msp@80124000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp1_default_mode>;
+ pinctrl-0 = <&msp1txrx_a_1_default>;
status = "okay";
};
msp2: msp@80117000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp2_default_mode>;
+ pinctrl-0 = <&msp2_a_1_default>;
};
msp3: msp@80125000 {
@@ -238,8 +231,8 @@
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi0_default_mode>;
- pinctrl-1 = <&sdi0_sleep_mode>;
+ pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
/* GPIO218 MMC_CD */
cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
@@ -253,8 +246,8 @@
max-frequency = <100000000>;
bus-width = <4>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi1_default_mode>;
- pinctrl-1 = <&sdi1_sleep_mode>;
+ pinctrl-0 = <&mc1_a_1_default>;
+ pinctrl-1 = <&mc1_a_1_sleep>;
status = "okay";
};
@@ -263,7 +256,7 @@
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
pinctrl-names = "default";
- pinctrl-0 = <&sdi2_sleep_mode>;
+ pinctrl-0 = <&mc2_a_1_sleep>;
status = "okay";
};
@@ -276,49 +269,52 @@
cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi4_default_mode>;
- pinctrl-1 = <&sdi4_sleep_mode>;
+ pinctrl-0 = <&mc4_a_1_default>;
+ pinctrl-1 = <&mc4_a_1_sleep>;
status = "okay";
};
uart@80120000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart1_default_mode>;
- pinctrl-1 = <&uart1_sleep_mode>;
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
};
uart@80007000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart2_default_mode>;
- pinctrl-1 = <&uart2_sleep_mode>;
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
status = "okay";
};
i2c@80004000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c0_default_mode>;
- pinctrl-1 = <&i2c0_sleep_mode>;
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+ status = "okay";
};
i2c@80122000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c1_default_mode>;
- pinctrl-1 = <&i2c1_sleep_mode>;
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
+ status = "okay";
};
i2c@80128000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c2_default_mode>;
- pinctrl-1 = <&i2c2_sleep_mode>;
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+ status = "okay";
lsm303dlh@18 {
/* Accelerometer */
compatible = "st,lsm303dlh-accel";
@@ -367,20 +363,18 @@
i2c@80110000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c3_default_mode>;
- pinctrl-1 = <&i2c3_sleep_mode>;
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+ status = "okay";
};
spi@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
+ status = "okay";
};
prcmu@80157000 {
- cpufreq {
- status = "okay";
- };
-
ab8500 {
ab8500-gpio {
/*
@@ -406,8 +400,8 @@
ab8500_usb {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
};
ext_regulators: ab8500-ext-regulators {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
new file mode 100644
index 000000000000..313f0ab16866
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Note: This device tree cannot be booted directly with the Samsung bootloader.
+ * You need an intermediate, device-tree compatible bootloader
+ * that locks the L2 cache. Otherwise the kernel will crash after decompression.
+ *
+ * There is a port of (mainline) U-Boot, see
+ * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot
+ */
+/ {
+ model = "Samsung Galaxy S III mini (GT-I8190)";
+ compatible = "samsung,golden", "st-ericsson,u8500";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ soc {
+ /* External Micro SD card slot */
+ sdi0_per1@80126000 {
+ status = "okay";
+
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+
+ non-removable;
+ /*
+ * Unfortunately, there is no way to enable the UHS
+ * modes due to a limitation of the SD level translator:
+ * It will either translate to 2.9V or disconnect the
+ * DATA lines, so switching to 1.8V signal voltage fails.
+ */
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&sd_level_translator>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_2_default>;
+ pinctrl-1 = <&mc0_a_2_sleep>;
+ };
+
+ /* WLAN SDIO */
+ sdi1_per2@80118000 {
+ status = "okay";
+
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
+ non-removable;
+ cap-sd-highspeed;
+
+ vmmc-supply = <&wl_reg_on>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_2_default>;
+ pinctrl-1 = <&mc1_a_2_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ /* GPIO216 (WLAN_HOST_WAKE) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default>;
+ };
+ };
+
+ /* eMMC */
+ sdi2_per3@80005000 {
+ status = "okay";
+
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+
+ vmmc-supply = <&vmem_3v3>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
+ };
+
+ /* BT UART */
+ uart@80120000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ /* GPIO222 (BT_VREG_ON) */
+ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ /* GPIO199 (BT_WAKE) */
+ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ /* GPIO97 (BT_HOST_WAKE) */
+ host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default>;
+ };
+ };
+
+ /* GPF UART */
+ uart@80121000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+ };
+
+ /* Debugging console UART */
+ uart@80007000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ };
+
+ i2c@80128000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+
+ imu@68 {
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+
+ /* GPIO206 (ACC_INT) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&ab8500_ldo_aux8_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&imu_default>;
+ };
+ };
+
+ i2c@80110000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+
+ /* GPIO218 (TSP_INT_1V8) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ };
+ };
+
+ prcmu@80157000 {
+ ab8505 {
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ab8505-regulators {
+ ab8500_ldo_aux1 {
+ regulator-name = "sensor_3v";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ab8500_ldo_aux2 {
+ regulator-name = "vreg_tsp_a3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on; /* FIXME */
+ };
+
+ ab8500_ldo_aux3 {
+ regulator-name = "vdd_tf_2v91";
+ };
+
+ ab8500_ldo_aux4 {
+ regulator-name = "key_led_3.3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux5 {
+ regulator-name = "vreg_tsp_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on; /* FIXME */
+ };
+
+ ab8500_ldo_aux6 {
+ regulator-name = "touch_key_2.2v";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ab8500_ldo_aux8 {
+ regulator-name = "sensor_1v8";
+ };
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ /* GPIO67 (VOL_UP) */
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ /* GPIO92 (VOL_DOWN) */
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ home {
+ label = "Home";
+ /* GPIO91 (HOME_KEY) */
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ };
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ /* GPIO195 (MOT_EN) */
+ enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_default>;
+ };
+
+ /* External LDO for eMMC */
+ vmem_3v3: regulator-vmem {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vmem_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ startup-delay-us = <200>;
+
+ /* GPIO223 (MEM_LDO_EN) */
+ gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mem_ldo_default>;
+ };
+
+ /* TI TXS0206-29 level translator for 2.9 V */
+ sd_level_translator: regulator-sd-level-translator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "sd-level-translator";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+
+ startup-delay-us = <200>;
+
+ /* GPIO87 (TXS0206-29_EN) */
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_level_translator_default>;
+ };
+
+ /*
+ * WL_REG_ON takes WLAN out of reset and enables the internal regulators.
+ * The voltage specified here is only used to determine the OCR mask,
+ * the BCM chip is actually connected directly to VBAT.
+ */
+ wl_reg_on: regulator-wl-reg-on {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg-on";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ startup-delay-us = <100000>;
+
+ /* GPIO215 (WLAN_EN) */
+ gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_default>;
+ };
+};
+
+&pinctrl {
+ gpio-keys {
+ gpio_keys_default: gpio_keys_default {
+ golden_cfg1 {
+ pins = "GPIO67", /* VOL_UP */
+ "GPIO91", /* HOME_KEY */
+ "GPIO92"; /* VOL_DOWN */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+
+ sdi0 {
+ sd_level_translator_default: sd_level_translator_default {
+ golden_cfg1 {
+ pins = "GPIO87_B3"; /* TXS0206-29_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
+ sdi2 {
+ mem_ldo_default: mem_ldo_default {
+ golden_cfg1 {
+ pins = "GPIO223_AH9"; /* MEM_LDO_EN */
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+
+ imu {
+ imu_default: imu_default {
+ golden_cfg1 {
+ pins = "GPIO206_AG24"; /* ACC_INT */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+
+ tsp {
+ tsp_default: tsp_default {
+ golden_cfg1 {
+ pins = "GPIO218_AH11"; /* TSP_INT_1V8 */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
+ wlan {
+ wlan_default: wlan_default {
+ golden_cfg1 {
+ pins = "GPIO216_AG12"; /* WLAN_HOST_WAKE */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+
+ wlan_en_default: wlan_en_default {
+ golden_cfg1 {
+ pins = "GPIO215_AH13"; /* WLAN_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
+ bluetooth {
+ bluetooth_default: bluetooth_default {
+ golden_cfg1 {
+ pins = "GPIO199_AH23", /* BT_WAKE */
+ "GPIO222_AJ9"; /* BT_VREG_ON */
+ ste,config = <&gpio_out_lo>;
+ };
+ golden_cfg2 {
+ pins = "GPIO97_D9"; /* BT_HOST_WAKE */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
+ vibrator {
+ vibrator_default: vibrator_default {
+ golden_cfg1 {
+ pins = "GPIO195_AG28"; /* MOT_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+};
+
+&ab8505_gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_default>;
+
+ gpio {
+ gpio_default: gpio_default {
+ golden_mux {
+ /* Change unused pins to GPIO mode */
+ function = "gpio";
+ groups = "gpio3_a_1", /* default: SysClkReq4 */
+ "gpio14_a_1"; /* default: PWMOut1 */
+ };
+ golden_cfg1 {
+ pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+ bias-disable;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 58288aa53fee..c27fa355e5ab 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -95,6 +95,13 @@
regulator-max-microvolt = <3300000>;
};
+ vdd_panel: vdd-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_panel";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
leds {
compatible = "gpio-leds";
green {
@@ -138,6 +145,7 @@
panel_rgb: panel-rgb {
compatible = "ampire,am-480272h3tmqw-t01h";
+ power-supply = <&vdd_panel>;
status = "okay";
port {
panel_in_rgb: endpoint {
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 35202896c093..392fa143ce07 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -163,7 +163,7 @@
st,bank-name = "GPIOK";
};
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -176,7 +176,7 @@
};
};
- usart3_pins_a: usart3@0 {
+ usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
bias-disable;
@@ -189,7 +189,7 @@
};
};
- usbotg_fs_pins_a: usbotg_fs@0 {
+ usbotg_fs_pins_a: usbotg-fs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -200,7 +200,7 @@
};
};
- usbotg_fs_pins_b: usbotg_fs@1 {
+ usbotg_fs_pins_b: usbotg-fs-1 {
pins {
pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
<STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
@@ -211,7 +211,7 @@
};
};
- usbotg_hs_pins_a: usbotg_hs@0 {
+ usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -231,7 +231,7 @@
};
};
- ethernet_mii: mii@0 {
+ ethernet_mii: mii-0 {
pins {
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
<STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
@@ -251,13 +251,13 @@
};
};
- adc3_in8_pin: adc@200 {
+ adc3_in8_pin: adc-200 {
pins {
pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
};
};
- pwm1_pins: pwm@1 {
+ pwm1_pins: pwm-1 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
<STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
@@ -265,14 +265,14 @@
};
};
- pwm3_pins: pwm@3 {
+ pwm3_pins: pwm-3 {
pins {
pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
<STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
};
};
- i2c1_pins: i2c1@0 {
+ i2c1_pins: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
<STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
@@ -282,7 +282,7 @@
};
};
- ltdc_pins: ltdc@0 {
+ ltdc_pins: ltdc-0 {
pins {
pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
<STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
@@ -316,7 +316,7 @@
};
};
- dcmi_pins: dcmi@0 {
+ dcmi_pins: dcmi-0 {
pins {
pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
<STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
@@ -339,7 +339,7 @@
};
};
- sdio_pins: sdio_pins@0 {
+ sdio_pins: sdio-pins-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
@@ -352,7 +352,7 @@
};
};
- sdio_pins_od: sdio_pins_od@0 {
+ sdio_pins_od: sdio-pins-od-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5c8a826b3195..d7770699feb5 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -80,7 +80,7 @@
};
soc {
- romem: nvmem@1fff7800 {
+ romem: efuse@1fff7800 {
compatible = "st,stm32f4-otp";
reg = <0x1fff7800 0x400>;
#address-cells = <1>;
@@ -318,7 +318,6 @@
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
clocks = <&rcc 1 CLK_RTC>;
- clock-names = "ck_rtc";
assigned-clocks = <&rcc 1 CLK_RTC>;
assigned-clock-parents = <&rcc 1 CLK_LSE>;
interrupt-parent = <&exti>;
@@ -789,7 +788,6 @@
rng: rng@50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
- interrupts = <80>;
clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
};
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index f3ce477b7bae..9397db0c43de 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -76,6 +76,13 @@
regulator-max-microvolt = <3300000>;
};
+ vdd_dsi: vdd-dsi {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_dsi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
soc {
dma-ranges = <0xc0000000 0x0 0x10000000>;
};
@@ -155,6 +162,7 @@
compatible = "orisetech,otm8009a";
reg = <0>; /* dsi virtual channel (0..3) */
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ power-supply = <&vdd_dsi>;
status = "okay";
port {
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9314128df185..fe4cfda72a47 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -127,7 +127,7 @@
st,bank-name = "GPIOK";
};
- cec_pins_a: cec@0 {
+ cec_pins_a: cec-0 {
pins {
pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
slew-rate = <0>;
@@ -136,7 +136,7 @@
};
};
- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -149,7 +149,7 @@
};
};
- usart1_pins_b: usart1@1 {
+ usart1_pins_b: usart1-1 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -162,7 +162,7 @@
};
};
- i2c1_pins_b: i2c1@0 {
+ i2c1_pins_b: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
<STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
@@ -172,7 +172,7 @@
};
};
- usbotg_hs_pins_a: usbotg-hs@0 {
+ usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -192,7 +192,7 @@
};
};
- usbotg_hs_pins_b: usbotg-hs@1 {
+ usbotg_hs_pins_b: usbotg-hs-1 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
<STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -212,7 +212,7 @@
};
};
- usbotg_fs_pins_a: usbotg-fs@0 {
+ usbotg_fs_pins_a: usbotg-fs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -223,7 +223,7 @@
};
};
- sdio_pins_a: sdio_pins_a@0 {
+ sdio_pins_a: sdio-pins-a-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -236,7 +236,7 @@
};
};
- sdio_pins_od_a: sdio_pins_od_a@0 {
+ sdio_pins_od_a: sdio-pins-od-a-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -254,7 +254,7 @@
};
};
- sdio_pins_b: sdio_pins_b@0 {
+ sdio_pins_b: sdio-pins-b-0 {
pins {
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
@@ -267,7 +267,7 @@
};
};
- sdio_pins_od_b: sdio_pins_od_b@0 {
+ sdio_pins_od_b: sdio-pins-od-b-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
<STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index d26f93f8b9c2..93c063796780 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -300,7 +300,6 @@
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
clocks = <&rcc 1 CLK_RTC>;
- clock-names = "ck_rtc";
assigned-clocks = <&rcc 1 CLK_RTC>;
assigned-clock-parents = <&rcc 1 CLK_LSE>;
interrupt-parent = <&exti>;
@@ -587,7 +586,7 @@
assigned-clock-rates = <1000000>;
};
- dma1: dma@40026000 {
+ dma1: dma-controller@40026000 {
compatible = "st,stm32-dma";
reg = <0x40026000 0x400>;
interrupts = <11>,
@@ -603,7 +602,7 @@
status = "disabled";
};
- dma2: dma@40026400 {
+ dma2: dma-controller@40026400 {
compatible = "st,stm32-dma";
reg = <0x40026400 0x400>;
interrupts = <56>,
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index c065266ee377..05eb02e6d083 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -231,7 +231,7 @@
status = "disabled";
};
- dma1: dma@40020000 {
+ dma1: dma-controller@40020000 {
compatible = "st,stm32-dma";
reg = <0x40020000 0x400>;
interrupts = <11>,
@@ -249,7 +249,7 @@
status = "disabled";
};
- dma2: dma@40020400 {
+ dma2: dma-controller@40020400 {
compatible = "st,stm32-dma";
reg = <0x40020400 0x400>;
interrupts = <56>,
@@ -329,7 +329,7 @@
status = "disabled";
};
- mdma1: dma@52000000 {
+ mdma1: dma-controller@52000000 {
compatible = "st,stm32h7-mdma";
reg = <0x52000000 0x1000>;
interrupts = <122>;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
new file mode 100644
index 000000000000..0237d4ddaa92
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,1092 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+ adc1_in6_pins_a: adc1-in6 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+ };
+ };
+
+ adc12_ain_pins_a: adc12-ain-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+ <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+ <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+ <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+ };
+ };
+
+ adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+ <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+ };
+ };
+
+ cec_pins_a: cec-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, AF4)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ cec_pins_sleep_a: cec-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
+ cec_pins_b: cec-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF5)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ cec_pins_sleep_b: cec-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
+ dac_ch1_pins_a: dac-ch1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+ };
+ };
+
+ dac_ch2_pins_a: dac-ch2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+ };
+ };
+
+ dcmi_pins_a: dcmi-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */
+ <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */
+ <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+ bias-disable;
+ };
+ };
+
+ dcmi_sleep_pins_a: dcmi-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */
+ <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */
+ <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+ };
+ };
+
+ ethernet0_rgmii_pins_a: rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+ };
+ };
+
+ fmc_pins_a: fmc-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+ bias-pull-up;
+ };
+ };
+
+ fmc_sleep_pins_a: fmc-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+ <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+ };
+ };
+
+ i2c1_pins_a: i2c1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_sleep_a: i2c1-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
+ i2c1_pins_b: i2c1-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_sleep_b: i2c1-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
+ i2c2_pins_a: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_a: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
+ i2c2_pins_b1: i2c2-2 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b1: i2c2-3 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
+ i2c5_pins_a: i2c5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c5_pins_sleep_a: i2c5-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+ };
+ };
+
+ i2s2_pins_a: i2s2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ i2s2_pins_sleep_a: i2s2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+ };
+ };
+
+ ltdc_pins_a: ltdc-a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ ltdc_pins_sleep_a: ltdc-a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
+ ltdc_pins_b: ltdc-b-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ ltdc_pins_sleep_b: ltdc-b-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
+ m_can1_pins_a: m-can1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+ bias-disable;
+ };
+ };
+
+ m_can1_sleep_pins_a: m_can1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+ <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+ };
+ };
+
+ pwm1_pins_a: pwm1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+ <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+ <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_a: pwm1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+ <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+ };
+ };
+
+ pwm2_pins_a: pwm2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm2_sleep_pins_a: pwm2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+ };
+ };
+
+ pwm3_pins_a: pwm3-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm3_sleep_pins_a: pwm3-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+ };
+ };
+
+ pwm4_pins_a: pwm4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+ <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm4_sleep_pins_a: pwm4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+ <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+ };
+ };
+
+ pwm4_pins_b: pwm4-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm4_sleep_pins_b: pwm4-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+ };
+ };
+
+ pwm5_pins_a: pwm5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm5_sleep_pins_a: pwm5-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+ };
+ };
+
+ pwm8_pins_a: pwm8-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_sleep_pins_a: pwm8-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+ };
+ };
+
+ pwm12_pins_a: pwm12-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_sleep_pins_a: pwm12-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+ };
+ };
+
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+ <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+ <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+ };
+ };
+
+ sai2a_pins_a: sai2a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai2a_sleep_pins_a: sai2a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+ };
+ };
+
+ sai2b_pins_a: sai2b-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_a: sai2b-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+ };
+ };
+
+ sai2b_pins_b: sai2b-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_b: sai2b-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+ };
+ };
+
+ sai4a_pins_a: sai4a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai4a_sleep_pins_a: sai4a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+ };
+ };
+
+ sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+ };
+ };
+
+ sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+ <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+ };
+ };
+
+ spdifrx_pins_a: spdifrx-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+ bias-disable;
+ };
+ };
+
+ spdifrx_sleep_pins_a: spdifrx-1 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_pins_b: uart4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_a: uart7-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+ <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+ <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+ bias-disable;
+ };
+ };
+};
+
+&pinctrl_z {
+ i2c2_pins_b2: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b2: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+ };
+ };
+
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c4_pins_sleep_a: i2c4-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+ };
+ };
+
+ spi1_pins_a: spi1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+ <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+ bias-disable;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index ed8b258256d7..fb41d0778b00 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -20,12 +20,6 @@
device_type = "cpu";
reg = <0>;
};
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <1>;
- };
};
psci {
@@ -148,6 +142,11 @@
reg = <1>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers3: timer@40001000 {
@@ -177,6 +176,11 @@
reg = <2>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers4: timer@40002000 {
@@ -204,6 +208,11 @@
reg = <3>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers5: timer@40003000 {
@@ -233,6 +242,11 @@
reg = <4>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers6: timer@40004000 {
@@ -589,6 +603,11 @@
reg = <0>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers8: timer@44001000 {
@@ -620,6 +639,11 @@
reg = <7>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
usart6: serial@44003000 {
@@ -923,33 +947,7 @@
};
};
- m_can1: can@4400e000 {
- compatible = "bosch,m_can";
- reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
- status = "disabled";
- };
-
- m_can2: can@4400f000 {
- compatible = "bosch,m_can";
- reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
- status = "disabled";
- };
-
- dma1: dma@48000000 {
+ dma1: dma-controller@48000000 {
compatible = "st,stm32-dma";
reg = <0x48000000 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -966,7 +964,7 @@
dma-requests = <8>;
};
- dma2: dma@48001000 {
+ dma2: dma-controller@48001000 {
compatible = "st,stm32-dma";
reg = <0x48001000 0x400>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
@@ -1030,6 +1028,21 @@
};
};
+ sdmmc3: sdmmc@48004000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC3_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC3_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
usbotg_hs: usb-otg@49000000 {
compatible = "snps,dwc2";
reg = <0x49000000 0x10000>;
@@ -1242,15 +1255,6 @@
status = "disabled";
};
- cryp1: cryp@54001000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54001000 0x400>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
-
hash1: hash@54002000 {
compatible = "st,stm32f756-hash";
reg = <0x54002000 0x400>;
@@ -1271,7 +1275,7 @@
status = "disabled";
};
- mdma1: dma@58000000 {
+ mdma1: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
@@ -1318,13 +1322,29 @@
arm,primecell-periphid = <0x10153180>;
reg = <0x58005000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC1_K>;
clock-names = "apb_pclk";
resets = <&rcc SDMMC1_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: sdmmc@58007000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x58007000 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
};
crc1: crc@58009000 {
@@ -1349,16 +1369,15 @@
clock-names = "stmmaceth",
"mac-clk-tx",
"mac-clk-rx",
- "ethstp",
- "syscfg-clk";
+ "ethstp";
clocks = <&rcc ETHMAC>,
<&rcc ETHTX>,
<&rcc ETHRX>,
- <&rcc ETHSTP>,
- <&rcc SYSCFG>;
+ <&rcc ETHSTP>;
st,syscon = <&syscfg 0x4>;
snps,mixed-burst;
snps,pbl = <2>;
+ snps,en-tx-lpi-clockgating;
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
status = "disabled";
@@ -1383,26 +1402,6 @@
status = "disabled";
};
- gpu: gpu@59000000 {
- compatible = "vivante,gc";
- reg = <0x59000000 0x800>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc GPU>, <&rcc GPU_K>;
- clock-names = "bus" ,"core";
- resets = <&rcc GPU_R>;
- status = "disabled";
- };
-
- dsi: dsi@5a000000 {
- compatible = "st,stm32-dsi";
- reg = <0x5a000000 0x800>;
- clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
- clock-names = "pclk", "ref", "px_clk";
- resets = <&rcc DSI_R>;
- reset-names = "apb";
- status = "disabled";
- };
-
ltdc: display-controller@5a001000 {
compatible = "st,stm32-ltdc";
reg = <0x5a001000 0x400>;
@@ -1486,7 +1485,7 @@
status = "disabled";
};
- bsec: nvmem@5c005000 {
+ bsec: efuse@5c005000 {
compatible = "st,stm32mp15-bsec";
reg = <0x5c005000 0x400>;
#address-cells = <1>;
@@ -1511,12 +1510,170 @@
#size-cells = <0>;
status = "disabled";
};
+
+ /*
+ * Break node order to solve dependency probe issue between
+ * pinctrl and exti.
+ */
+ pinctrl: pin-controller@50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ status = "disabled";
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ status = "disabled";
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ status = "disabled";
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ status = "disabled";
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ status = "disabled";
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ status = "disabled";
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ status = "disabled";
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ status = "disabled";
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ status = "disabled";
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&rcc GPIOJ>;
+ st,bank-name = "GPIOJ";
+ status = "disabled";
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&rcc GPIOK>;
+ st,bank-name = "GPIOK";
+ status = "disabled";
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&rcc GPIOZ>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ status = "disabled";
+ };
+ };
};
- mlahb {
- compatible = "simple-bus";
+ mlahb: ahb {
+ compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ ranges;
dma-ranges = <0x00000000 0x38000000 0x10000>,
<0x10000000 0x10000000 0x60000>,
<0x30000000 0x30000000 0x60000>;
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
new file mode 100644
index 000000000000..2d759fc6015c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+ cpus {
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ m_can1: can@4400e000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+
+ m_can2: can@4400f000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
deleted file mode 100644
index 3d1ecb408b03..000000000000
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ /dev/null
@@ -1,953 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32mp157-pinctrl";
- ranges = <0 0x50002000 0xa400>;
- interrupt-parent = <&exti>;
- st,syscfg = <&exti 0x60 0xff>;
- pins-are-numbered;
-
- gpioa: gpio@50002000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc GPIOA>;
- st,bank-name = "GPIOA";
- status = "disabled";
- };
-
- gpiob: gpio@50003000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc GPIOB>;
- st,bank-name = "GPIOB";
- status = "disabled";
- };
-
- gpioc: gpio@50004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc GPIOC>;
- st,bank-name = "GPIOC";
- status = "disabled";
- };
-
- gpiod: gpio@50005000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x400>;
- clocks = <&rcc GPIOD>;
- st,bank-name = "GPIOD";
- status = "disabled";
- };
-
- gpioe: gpio@50006000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x400>;
- clocks = <&rcc GPIOE>;
- st,bank-name = "GPIOE";
- status = "disabled";
- };
-
- gpiof: gpio@50007000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000 0x400>;
- clocks = <&rcc GPIOF>;
- st,bank-name = "GPIOF";
- status = "disabled";
- };
-
- gpiog: gpio@50008000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x6000 0x400>;
- clocks = <&rcc GPIOG>;
- st,bank-name = "GPIOG";
- status = "disabled";
- };
-
- gpioh: gpio@50009000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x7000 0x400>;
- clocks = <&rcc GPIOH>;
- st,bank-name = "GPIOH";
- status = "disabled";
- };
-
- gpioi: gpio@5000a000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x8000 0x400>;
- clocks = <&rcc GPIOI>;
- st,bank-name = "GPIOI";
- status = "disabled";
- };
-
- gpioj: gpio@5000b000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x9000 0x400>;
- clocks = <&rcc GPIOJ>;
- st,bank-name = "GPIOJ";
- status = "disabled";
- };
-
- gpiok: gpio@5000c000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0xa000 0x400>;
- clocks = <&rcc GPIOK>;
- st,bank-name = "GPIOK";
- status = "disabled";
- };
-
- adc12_ain_pins_a: adc12-ain-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
- <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
- <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
- <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
- };
- };
-
- adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
- <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
- };
- };
-
- cec_pins_a: cec-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 15, AF4)>;
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- cec_pins_sleep_a: cec-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
- };
- };
-
- cec_pins_b: cec-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 6, AF5)>;
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- cec_pins_sleep_b: cec-sleep-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
- };
- };
-
- dac_ch1_pins_a: dac-ch1 {
- pins {
- pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
- };
- };
-
- dac_ch2_pins_a: dac-ch2 {
- pins {
- pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
- };
- };
-
- dcmi_pins_a: dcmi-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
- <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
- <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
- <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */
- <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
- <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
- <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
- <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
- <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
- <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */
- <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
- <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
- <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */
- <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */
- <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
- bias-disable;
- };
- };
-
- dcmi_sleep_pins_a: dcmi-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */
- <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
- <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
- <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */
- <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
- <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
- <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
- <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
- <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
- <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */
- <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
- <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
- <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */
- <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */
- <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
- };
- };
-
- ethernet0_rgmii_pins_a: rgmii-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
- <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
- <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
- <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
- <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
- <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
- <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
- <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
- <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
- <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
- <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
- <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
- bias-disable;
- };
- };
-
- ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
- <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
- <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
- <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
- <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
- <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
- <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
- <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
- <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
- <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
- <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
- <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
- <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
- };
- };
-
- fmc_pins_a: fmc-0 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
- <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
- <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
- <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
- <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
- <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
- <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
- <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
- <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
- <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
- <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
- <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
- <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
- bias-pull-up;
- };
- };
-
- fmc_sleep_pins_a: fmc-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
- <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
- <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
- <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
- <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
- <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
- <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
- <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
- <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
- <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
- <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
- <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
- <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
- <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
- };
- };
-
- i2c1_pins_a: i2c1-0 {
- pins {
- pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c1_pins_sleep_a: i2c1-1 {
- pins {
- pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
- };
- };
-
- i2c1_pins_b: i2c1-2 {
- pins {
- pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c1_pins_sleep_b: i2c1-3 {
- pins {
- pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
- };
- };
-
- i2c2_pins_a: i2c2-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
- <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c2_pins_sleep_a: i2c2-1 {
- pins {
- pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
- <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
- };
- };
-
- i2c2_pins_b1: i2c2-2 {
- pins {
- pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c2_pins_sleep_b1: i2c2-3 {
- pins {
- pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
- };
- };
-
- i2c5_pins_a: i2c5-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
- <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c5_pins_sleep_a: i2c5-1 {
- pins {
- pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
- <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
-
- };
- };
-
- i2s2_pins_a: i2s2-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
- <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
- <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
- slew-rate = <1>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- i2s2_pins_sleep_a: i2s2-1 {
- pins {
- pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
- <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
- <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
- };
- };
-
- ltdc_pins_a: ltdc-a-0 {
- pins {
- pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
- <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
- <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
- <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */
- <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */
- <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */
- <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */
- <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
- <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */
- <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
- <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
- <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */
- <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */
- <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
- <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
- <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
- <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */
- <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */
- <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */
- <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */
- <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
- <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
- <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
- <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */
- <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */
- <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
- <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- ltdc_pins_sleep_a: ltdc-a-1 {
- pins {
- pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
- <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
- <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
- <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */
- <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */
- <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */
- <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */
- <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
- <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */
- <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
- <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
- <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */
- <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */
- <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
- <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
- <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
- <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */
- <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */
- <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */
- <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */
- <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
- <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
- <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
- <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */
- <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */
- <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
- <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */
- };
- };
-
- ltdc_pins_b: ltdc-b-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
- <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
- <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */
- <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
- <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
- <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
- <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
- <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
- <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
- <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
- <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
- <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
- <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
- <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
- <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
- <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
- <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
- <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
- <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
- <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
- <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
- <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
- <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
- <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
- <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
- <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
- <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- ltdc_pins_sleep_b: ltdc-b-1 {
- pins {
- pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
- <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
- <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */
- <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
- <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */
- <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */
- <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */
- <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */
- <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */
- <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */
- <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */
- <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */
- <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */
- <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */
- <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
- <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
- <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */
- <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */
- <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */
- <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
- <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
- <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
- <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
- <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */
- <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */
- <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */
- <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */
- };
- };
-
- m_can1_pins_a: m-can1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
- slew-rate = <1>;
- drive-push-pull;
- bias-disable;
- };
- pins2 {
- pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
- bias-disable;
- };
- };
-
- m_can1_sleep_pins_a: m_can1-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
- <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
- };
- };
-
- pwm2_pins_a: pwm2-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
- bias-pull-down;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- pwm8_pins_a: pwm8-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
- bias-pull-down;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- pwm12_pins_a: pwm12-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
- bias-pull-down;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- qspi_clk_pins_a: qspi-clk-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- };
-
- qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
- };
- };
-
- qspi_bk1_pins_a: qspi-bk1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
- <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
- <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
- <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
- <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
- <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
- <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
- <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
- };
- };
-
- qspi_bk2_pins_a: qspi-bk2-0 {
- pins1 {
- pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
- <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
- <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
- <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
- <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
- <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
- <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
- <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
- };
- };
-
- sai2a_pins_a: sai2a-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
- <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
- <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
- <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
- slew-rate = <0>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sai2a_sleep_pins_a: sai2a-1 {
- pins {
- pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
- <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
- <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
- <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
- };
- };
-
- sai2b_pins_a: sai2b-0 {
- pins1 {
- pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
- <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
- <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
- slew-rate = <0>;
- drive-push-pull;
- bias-disable;
- };
- pins2 {
- pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
- bias-disable;
- };
- };
-
- sai2b_sleep_pins_a: sai2b-1 {
- pins {
- pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
- <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
- <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
- <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
- };
- };
-
- sai2b_pins_b: sai2b-2 {
- pins {
- pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
- bias-disable;
- };
- };
-
- sai2b_sleep_pins_b: sai2b-3 {
- pins {
- pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
- };
- };
-
- sai4a_pins_a: sai4a-0 {
- pins {
- pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
- slew-rate = <0>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sai4a_sleep_pins_a: sai4a-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
- };
- };
-
- sdmmc1_b4_pins_a: sdmmc1-b4-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
- pins1 {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- pins2{
- pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-open-drain;
- bias-disable;
- };
- };
-
- sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
- };
- };
-
- sdmmc1_dir_pins_a: sdmmc1-dir-0 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
- slew-rate = <3>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2{
- pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
- bias-pull-up;
- };
- };
-
- sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
- <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
- };
- };
-
- spdifrx_pins_a: spdifrx-0 {
- pins {
- pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
- bias-disable;
- };
- };
-
- spdifrx_sleep_pins_a: spdifrx-1 {
- pins {
- pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
- };
- };
-
- uart4_pins_a: uart4-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
- };
-
- uart4_pins_b: uart4-1 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
- };
-
- uart7_pins_a: uart7-0 {
- pins1 {
- pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
- <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
- <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
- bias-disable;
- };
- };
- };
-
- pinctrl_z: pin-controller-z@54004000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32mp157-z-pinctrl";
- ranges = <0 0x54004000 0x400>;
- pins-are-numbered;
- interrupt-parent = <&exti>;
- st,syscfg = <&exti 0x60 0xff>;
-
- gpioz: gpio@54004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x400>;
- clocks = <&rcc GPIOZ>;
- st,bank-name = "GPIOZ";
- st,bank-ioport = <11>;
- status = "disabled";
- };
-
- i2c2_pins_b2: i2c2-0 {
- pins {
- pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c2_pins_sleep_b2: i2c2-1 {
- pins {
- pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
- };
- };
-
- i2c4_pins_a: i2c4-0 {
- pins {
- pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
- <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c4_pins_sleep_a: i2c4-1 {
- pins {
- pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
- <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
- };
- };
-
- spi1_pins_a: spi1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
- <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
-
- pins2 {
- pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
- bias-disable;
- };
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi
new file mode 100644
index 000000000000..3f0a4a91cce6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
+
+/ {
+ soc {
+ gpu: gpu@59000000 {
+ compatible = "vivante,gc";
+ reg = <0x59000000 0x800>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc GPU>, <&rcc GPU_K>;
+ clock-names = "bus" ,"core";
+ resets = <&rcc GPU_R>;
+ status = "disabled";
+ };
+
+ dsi: dsi@5a000000 {
+ compatible = "st,stm32-dsi";
+ reg = <0x5a000000 0x800>;
+ clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+ clock-names = "pclk", "ref", "px_clk";
+ resets = <&rcc DSI_R>;
+ reset-names = "apb";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 628c74a45a25..cbfa4075907e 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -6,8 +6,9 @@
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 984a47cbd13d..d03d4cd2606a 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -6,10 +6,10 @@
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
/ {
model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -23,494 +23,4 @@
chosen {
stdout-path = "serial0:115200n8";
};
-
- memory@c0000000 {
- device_type = "memory";
- reg = <0xc0000000 0x20000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mcuram2: mcuram2@10000000 {
- compatible = "shared-dma-pool";
- reg = <0x10000000 0x40000>;
- no-map;
- };
-
- vdev0vring0: vdev0vring0@10040000 {
- compatible = "shared-dma-pool";
- reg = <0x10040000 0x1000>;
- no-map;
- };
-
- vdev0vring1: vdev0vring1@10041000 {
- compatible = "shared-dma-pool";
- reg = <0x10041000 0x1000>;
- no-map;
- };
-
- vdev0buffer: vdev0buffer@10042000 {
- compatible = "shared-dma-pool";
- reg = <0x10042000 0x4000>;
- no-map;
- };
-
- mcuram: mcuram@30000000 {
- compatible = "shared-dma-pool";
- reg = <0x30000000 0x40000>;
- no-map;
- };
-
- retram: retram@38000000 {
- compatible = "shared-dma-pool";
- reg = <0x38000000 0x10000>;
- no-map;
- };
-
- gpu_reserved: gpu@d4000000 {
- reg = <0xd4000000 0x4000000>;
- no-map;
- };
- };
-
- led {
- compatible = "gpio-leds";
- blue {
- label = "heartbeat";
- gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
- };
-
- sound {
- compatible = "audio-graph-card";
- label = "STM32MP1-DK";
- routing =
- "Playback" , "MCLK",
- "Capture" , "MCLK",
- "MICL" , "Mic Bias";
- dais = <&sai2a_port &sai2b_port &i2s2_port>;
- status = "okay";
- };
-};
-
-&adc {
- pinctrl-names = "default";
- pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
- vdd-supply = <&vdd>;
- vdda-supply = <&vdd>;
- vref-supply = <&vrefbuf>;
- status = "disabled";
- adc1: adc@0 {
- /*
- * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
- * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
- * 5 * (56 + 47kOhms) * 5pF => 2.5us.
- * Use arbitrary margin here (e.g. 5us).
- */
- st,min-sample-time-nsecs = <5000>;
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 6 13 18 19>;
- status = "okay";
- };
- adc2: adc@100 {
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 2 6 18 19>;
- st,min-sample-time-nsecs = <5000>;
- status = "okay";
- };
-};
-
-&cec {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cec_pins_b>;
- pinctrl-1 = <&cec_pins_sleep_b>;
- status = "okay";
-};
-
-&ethernet0 {
- status = "okay";
- pinctrl-0 = <&ethernet0_rgmii_pins_a>;
- pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rgmii-id";
- max-speed = <1000>;
- phy-handle = <&phy0>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-};
-
-&gpu {
- contiguous-area = <&gpu_reserved>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_pins_a>;
- pinctrl-1 = <&i2c1_pins_sleep_a>;
- i2c-scl-rising-time-ns = <100>;
- i2c-scl-falling-time-ns = <7>;
- status = "okay";
- /delete-property/dmas;
- /delete-property/dma-names;
-
- hdmi-transmitter@39 {
- compatible = "sil,sii9022";
- reg = <0x39>;
- iovcc-supply = <&v3v3_hdmi>;
- cvcc12-supply = <&v1v2_hdmi>;
- reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpiog>;
- #sound-dai-cells = <0>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- sii9022_in: endpoint {
- remote-endpoint = <&ltdc_ep0_out>;
- };
- };
-
- port@3 {
- reg = <3>;
- sii9022_tx_endpoint: endpoint {
- remote-endpoint = <&i2s2_endpoint>;
- };
- };
- };
- };
-
- cs42l51: cs42l51@4a {
- compatible = "cirrus,cs42l51";
- reg = <0x4a>;
- #sound-dai-cells = <0>;
- VL-supply = <&v3v3>;
- VD-supply = <&v1v8_audio>;
- VA-supply = <&v1v8_audio>;
- VAHP-supply = <&v1v8_audio>;
- reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
- clocks = <&sai2a>;
- clock-names = "MCLK";
- status = "okay";
-
- cs42l51_port: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cs42l51_tx_endpoint: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&sai2a_endpoint>;
- frame-master;
- bitclock-master;
- };
-
- cs42l51_rx_endpoint: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&sai2b_endpoint>;
- frame-master;
- bitclock-master;
- };
- };
- };
-};
-
-&i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
- /* spare dmas for other usage */
- /delete-property/dmas;
- /delete-property/dma-names;
-
- pmic: stpmic@33 {
- compatible = "st,stpmic1";
- reg = <0x33>;
- interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- status = "okay";
-
- regulators {
- compatible = "st,stpmic1-regulators";
- ldo1-supply = <&v3v3>;
- ldo3-supply = <&vdd_ddr>;
- ldo6-supply = <&v3v3>;
- pwr_sw1-supply = <&bst_out>;
- pwr_sw2-supply = <&bst_out>;
-
- vddcore: buck1 {
- regulator-name = "vddcore";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd_ddr: buck2 {
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd: buck3 {
- regulator-name = "vdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- st,mask-reset;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- v3v3: buck4 {
- regulator-name = "v3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-over-current-protection;
- regulator-initial-mode = <0>;
- };
-
- v1v8_audio: ldo1 {
- regulator-name = "v1v8_audio";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO1 0>;
- };
-
- v3v3_hdmi: ldo2 {
- regulator-name = "v3v3_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO2 0>;
- };
-
- vtt_ddr: ldo3 {
- regulator-name = "vtt_ddr";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- vdd_usb: ldo4 {
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- interrupts = <IT_CURLIM_LDO4 0>;
- };
-
- vdda: ldo5 {
- regulator-name = "vdda";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- interrupts = <IT_CURLIM_LDO5 0>;
- regulator-boot-on;
- };
-
- v1v2_hdmi: ldo6 {
- regulator-name = "v1v2_hdmi";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO6 0>;
- };
-
- vref_ddr: vref_ddr {
- regulator-name = "vref_ddr";
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- bst_out: boost {
- regulator-name = "bst_out";
- interrupts = <IT_OCP_BOOST 0>;
- };
-
- vbus_otg: pwr_sw1 {
- regulator-name = "vbus_otg";
- interrupts = <IT_OCP_OTG 0>;
- };
-
- vbus_sw: pwr_sw2 {
- regulator-name = "vbus_sw";
- interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge = <1>;
- };
- };
-
- onkey {
- compatible = "st,stpmic1-onkey";
- interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
- interrupt-names = "onkey-falling", "onkey-rising";
- power-off-time-sec = <10>;
- status = "okay";
- };
-
- watchdog {
- compatible = "st,stpmic1-wdt";
- status = "disabled";
- };
- };
-};
-
-&i2s2 {
- clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
- clock-names = "pclk", "i2sclk", "x8k", "x11k";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2s2_pins_a>;
- pinctrl-1 = <&i2s2_pins_sleep_a>;
- status = "okay";
-
- i2s2_port: port {
- i2s2_endpoint: endpoint {
- remote-endpoint = <&sii9022_tx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- };
- };
-};
-
-&ipcc {
- status = "okay";
-};
-
-&iwdg2 {
- timeout-sec = <32>;
- status = "okay";
-};
-
-&ltdc {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&ltdc_pins_a>;
- pinctrl-1 = <&ltdc_pins_sleep_a>;
- status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&sii9022_in>;
- };
- };
-};
-
-&m4_rproc {
- memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
- <&vdev0vring1>, <&vdev0buffer>;
- mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
- mbox-names = "vq0", "vq1", "shutdown";
- interrupt-parent = <&exti>;
- interrupts = <68 1>;
- status = "okay";
-};
-
-&pwr_regulators {
- vdd-supply = <&vdd>;
- vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
- status = "okay";
-};
-
-&rtc {
- status = "okay";
-};
-
-&sai2 {
- clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
- clock-names = "pclk", "x8k", "x11k";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
- pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
- status = "okay";
-
- sai2a: audio-controller@4400b004 {
- #clock-cells = <0>;
- dma-names = "tx";
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- status = "okay";
-
- sai2a_port: port {
- sai2a_endpoint: endpoint {
- remote-endpoint = <&cs42l51_tx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <32>;
- };
- };
- };
-
- sai2b: audio-controller@4400b024 {
- dma-names = "rx";
- st,sync = <&sai2a 2>;
- clocks = <&rcc SAI2_K>, <&sai2a>;
- clock-names = "sai_ck", "MCLK";
- status = "okay";
-
- sai2b_port: port {
- sai2b_endpoint: endpoint {
- remote-endpoint = <&cs42l51_rx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <32>;
- };
- };
- };
-};
-
-&sdmmc1 {
- pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
- pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
- broken-cd;
- st,neg-edge;
- bus-width = <4>;
- vmmc-supply = <&v3v3>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
-};
-
-&vrefbuf {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- vdda-supply = <&vdd>;
- status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index d26adcbeba33..7985b80967ca 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -6,11 +6,24 @@
/dts-v1/;
-#include "stm32mp157a-dk1.dts"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = &ethernet0;
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&dsi {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index b8cc0fb0ec48..1fc43251d697 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -5,8 +5,10 @@
*/
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xaa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
@@ -89,6 +91,22 @@
};
};
+&adc {
+ /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+ pinctrl-0 = <&adc1_in6_pins_a>;
+ pinctrl-names = "default";
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vdda>;
+ status = "disabled";
+ adc1: adc@0 {
+ st,adc-channels = <0 1 6>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-nsecs = <400>;
+ status = "okay";
+ };
+};
+
&dac {
pinctrl-names = "default";
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
@@ -305,6 +323,22 @@
status = "okay";
};
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
+
&timers6 {
status = "okay";
/* spare dmas for other usage */
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 3789312c8539..228e35e16884 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -283,6 +283,18 @@
};
};
+&sdmmc3 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc3_b4_pins_a>;
+ pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "disabled";
+};
+
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>;
@@ -296,7 +308,8 @@
status = "disabled";
pwm {
pinctrl-0 = <&pwm2_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm2_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer@1 {
@@ -310,7 +323,8 @@
status = "disabled";
pwm {
pinctrl-0 = <&pwm8_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm8_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer@7 {
@@ -324,7 +338,8 @@
status = "disabled";
pwm {
pinctrl-0 = <&pwm12_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm12_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer@11 {
@@ -340,6 +355,7 @@
&usbotg_hs {
dr_mode = "peripheral";
phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
deleted file mode 100644
index 875adf5e1e30..000000000000
--- a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- st,package = <STM32MP_PKG_AA>;
-
- gpioa: gpio@50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio@50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio@50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio@50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio@50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio@50007000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
- };
-
- gpiog: gpio@50008000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
- };
-
- gpioh: gpio@50009000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
- };
-
- gpioi: gpio@5000a000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 128 16>;
- };
-
- gpioj: gpio@5000b000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 144 16>;
- };
-
- gpiok: gpio@5000c000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl 0 160 8>;
- };
- };
-
- pinctrl_z: pin-controller-z@54004000 {
- st,package = <STM32MP_PKG_AA>;
-
- gpioz: gpio@54004000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
deleted file mode 100644
index 961fa12a59c3..000000000000
--- a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- st,package = <STM32MP_PKG_AB>;
-
- gpioa: gpio@50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio@50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio@50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio@50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio@50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio@50007000 {
- status = "okay";
- ngpios = <6>;
- gpio-ranges = <&pinctrl 6 86 6>;
- };
-
- gpiog: gpio@50008000 {
- status = "okay";
- ngpios = <10>;
- gpio-ranges = <&pinctrl 6 102 10>;
- };
-
- gpioh: gpio@50009000 {
- status = "okay";
- ngpios = <2>;
- gpio-ranges = <&pinctrl 0 112 2>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
deleted file mode 100644
index 26600f188d25..000000000000
--- a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- st,package = <STM32MP_PKG_AC>;
-
- gpioa: gpio@50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio@50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio@50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio@50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio@50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio@50007000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
- };
-
- gpiog: gpio@50008000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
- };
-
- gpioh: gpio@50009000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
- };
-
- gpioi: gpio@5000a000 {
- status = "okay";
- ngpios = <12>;
- gpio-ranges = <&pinctrl 0 128 12>;
- };
- };
-
- pinctrl_z: pin-controller-z@54004000 {
- st,package = <STM32MP_PKG_AC>;
-
- gpioz: gpio@54004000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
deleted file mode 100644
index 910113f3e69a..000000000000
--- a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller@50002000 {
- st,package = <STM32MP_PKG_AD>;
-
- gpioa: gpio@50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio@50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio@50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio@50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio@50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio@50007000 {
- status = "okay";
- ngpios = <6>;
- gpio-ranges = <&pinctrl 6 86 6>;
- };
-
- gpiog: gpio@50008000 {
- status = "okay";
- ngpios = <10>;
- gpio-ranges = <&pinctrl 6 102 10>;
- };
-
- gpioh: gpio@50009000 {
- status = "okay";
- ngpios = <2>;
- gpio-ranges = <&pinctrl 0 112 2>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi
new file mode 100644
index 000000000000..b06a55a2fa18
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+ soc {
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 000000000000..f6672e87aef3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+
+ gpu_reserved: gpu@d4000000 {
+ reg = <0xd4000000 0x4000000>;
+ no-map;
+ };
+ };
+
+ led {
+ compatible = "gpio-leds";
+ blue {
+ label = "heartbeat";
+ gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "STM32MP1-DK";
+ routing =
+ "Playback" , "MCLK",
+ "Capture" , "MCLK",
+ "MICL" , "Mic Bias";
+ dais = <&sai2a_port &sai2b_port &i2s2_port>;
+ status = "okay";
+ };
+};
+
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdd>;
+ vref-supply = <&vrefbuf>;
+ status = "disabled";
+ adc1: adc@0 {
+ /*
+ * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+ * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+ * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+ * Use arbitrary margin here (e.g. 5us).
+ */
+ st,min-sample-time-nsecs = <5000>;
+ /* AIN connector, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 6 13 18 19>;
+ status = "okay";
+ };
+ adc2: adc@100 {
+ /* AIN connector, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 2 6 18 19>;
+ st,min-sample-time-nsecs = <5000>;
+ status = "okay";
+ };
+};
+
+&cec {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cec_pins_b>;
+ pinctrl-1 = <&cec_pins_sleep_b>;
+ status = "okay";
+};
+
+&ethernet0 {
+ status = "okay";
+ pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii-id";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_pins_sleep_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ hdmi-transmitter@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ iovcc-supply = <&v3v3_hdmi>;
+ cvcc12-supply = <&v1v2_hdmi>;
+ reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpiog>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sii9022_in: endpoint {
+ remote-endpoint = <&ltdc_ep0_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ sii9022_tx_endpoint: endpoint {
+ remote-endpoint = <&i2s2_endpoint>;
+ };
+ };
+ };
+ };
+
+ cs42l51: cs42l51@4a {
+ compatible = "cirrus,cs42l51";
+ reg = <0x4a>;
+ #sound-dai-cells = <0>;
+ VL-supply = <&v3v3>;
+ VD-supply = <&v1v8_audio>;
+ VA-supply = <&v1v8_audio>;
+ VAHP-supply = <&v1v8_audio>;
+ reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+ clocks = <&sai2a>;
+ clock-names = "MCLK";
+ status = "okay";
+
+ cs42l51_port: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs42l51_tx_endpoint: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&sai2a_endpoint>;
+ frame-master;
+ bitclock-master;
+ };
+
+ cs42l51_rx_endpoint: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&sai2b_endpoint>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge = <1>;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&i2s2 {
+ clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+ clock-names = "pclk", "i2sclk", "x8k", "x11k";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2s2_pins_a>;
+ pinctrl-1 = <&i2s2_pins_sleep_a>;
+ status = "okay";
+
+ i2s2_port: port {
+ i2s2_endpoint: endpoint {
+ remote-endpoint = <&sii9022_tx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&ltdc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ltdc_pins_a>;
+ pinctrl-1 = <&ltdc_pins_sleep_a>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
+&m4_rproc {
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sai2 {
+ clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+ clock-names = "pclk", "x8k", "x11k";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+ pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+ status = "okay";
+
+ sai2a: audio-controller@4400b004 {
+ #clock-cells = <0>;
+ dma-names = "tx";
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ status = "okay";
+
+ sai2a_port: port {
+ sai2a_endpoint: endpoint {
+ remote-endpoint = <&cs42l51_tx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ };
+ };
+ };
+
+ sai2b: audio-controller@4400b024 {
+ dma-names = "rx";
+ st,sync = <&sai2a 2>;
+ clocks = <&rcc SAI2_K>, <&sai2a>;
+ clock-names = "sai_ck", "MCLK";
+ status = "okay";
+
+ sai2b_port: port {
+ sai2b_endpoint: endpoint {
+ remote-endpoint = <&cs42l51_rx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ };
+ };
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&sdmmc3 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc3_b4_pins_a>;
+ pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "disabled";
+};
+
+&timers1 {
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm1_pins_a>;
+ pinctrl-1 = <&pwm1_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm3_pins_a>;
+ pinctrl-1 = <&pwm3_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@2 {
+ status = "okay";
+ };
+};
+
+&timers4 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+ pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@3 {
+ status = "okay";
+ };
+};
+
+&timers5 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm5_pins_a>;
+ pinctrl-1 = <&pwm5_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@4 {
+ status = "okay";
+ };
+};
+
+&timers6 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ timer@5 {
+ status = "okay";
+ };
+};
+
+&timers12 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm12_pins_a>;
+ pinctrl-1 = <&pwm12_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@11 {
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "peripheral";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>;
+};
+
+&vrefbuf {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vdda-supply = <&vdd>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 000000000000..04f7a43ad66f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 000000000000..328dad140e9b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AB>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 000000000000..7eaa245f44db
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <12>;
+ gpio-ranges = <&pinctrl 0 128 12>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 000000000000..b63e207de216
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AD>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 4c268b70b735..bf531efc0610 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -624,6 +624,16 @@
status = "disabled";
};
+ csi1: csi@1c1d000 {
+ compatible = "allwinner,sun4i-a10-csi1";
+ reg = <0x01c1d000 0x1000>;
+ interrupts = <43>;
+ clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+ clock-names = "bus", "ram";
+ resets = <&ccu RST_CSI1>;
+ status = "disabled";
+ };
+
spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
@@ -670,6 +680,31 @@
function = "can";
};
+ /omit-if-no-ref/
+ csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+ pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+ "PG6", "PG7", "PG8", "PG9", "PG10",
+ "PG11";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+ pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+ "PH5", "PH6", "PH7", "PH8", "PH9",
+ "PH10", "PH11", "PH12", "PH13", "PH14",
+ "PH15", "PH16", "PH17", "PH18", "PH19",
+ "PH20", "PH21", "PH22", "PH23", "PH24",
+ "PH25", "PH26", "PH27";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_clk_pg_pin: csi1-clk-pg-pin {
+ pins = "PG1";
+ function = "csi1";
+ };
+
emac_pins: emac0-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 6befa236ba99..0b526e6e5a95 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -185,7 +185,7 @@
mbus: dram-controller@1c01000 {
compatible = "allwinner,sun5i-a13-mbus";
reg = <0x01c01000 0x1000>;
- clocks = <&ccu 99>;
+ clocks = <&ccu CLK_MBUS>;
dma-ranges = <0x00000000 0x40000000 0x20000000>;
#interconnect-cells = <1>;
};
@@ -275,6 +275,7 @@
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 14>;
resets = <&ccu RST_LCD>;
reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD>,
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 2cf34ae1c17b..7762fbd9a133 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -285,14 +285,19 @@
compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&ccu RST_AHB1_LCD0>;
- reset-names = "lcd";
+ dmas = <&dma 11>;
+ resets = <&ccu RST_AHB1_LCD0>,
+ <&ccu RST_AHB1_LVDS>;
+ reset-names = "lcd",
+ "lvds";
clocks = <&ccu CLK_AHB1_LCD0>,
<&ccu CLK_LCD0_CH0>,
- <&ccu CLK_LCD0_CH1>;
+ <&ccu CLK_LCD0_CH1>,
+ <&ccu 15>;
clock-names = "ahb",
"tcon-ch0",
- "tcon-ch1";
+ "tcon-ch1",
+ "lvds-alt";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
@@ -334,14 +339,18 @@
compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&ccu RST_AHB1_LCD1>;
- reset-names = "lcd";
+ dmas = <&dma 12>;
+ resets = <&ccu RST_AHB1_LCD1>,
+ <&ccu RST_AHB1_LVDS>;
+ reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB1_LCD1>,
<&ccu CLK_LCD1_CH0>,
- <&ccu CLK_LCD1_CH1>;
+ <&ccu CLK_LCD1_CH1>,
+ <&ccu 15>;
clock-names = "ahb",
"tcon-ch0",
- "tcon-ch1";
+ "tcon-ch1",
+ "lvds-alt";
clock-output-names = "tcon1-pixel-clock";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8aebefd6accf..92b5be97085d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -729,6 +729,17 @@
status = "disabled";
};
+ csi1: csi@1c1d000 {
+ compatible = "allwinner,sun7i-a20-csi1",
+ "allwinner,sun4i-a10-csi1";
+ reg = <0x01c1d000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+ clock-names = "bus", "ram";
+ resets = <&ccu RST_CSI1>;
+ status = "disabled";
+ };
+
spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
@@ -803,6 +814,31 @@
};
/omit-if-no-ref/
+ csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+ pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+ "PG6", "PG7", "PG8", "PG9", "PG10",
+ "PG11";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+ pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+ "PH5", "PH6", "PH7", "PH8", "PH9",
+ "PH10", "PH11", "PH12", "PH13", "PH14",
+ "PH15", "PH16", "PH17", "PH18", "PH19",
+ "PH20", "PH21", "PH22", "PH23", "PH24",
+ "PH25", "PH26", "PH27";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_clk_pg_pin: csi1-clk-pg-pin {
+ pins = "PG1";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index f292f96ab39b..48487f6d4ab9 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -182,14 +182,19 @@
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 12>;
clocks = <&ccu CLK_BUS_LCD>,
- <&ccu CLK_LCD_CH0>;
+ <&ccu CLK_LCD_CH0>,
+ <&ccu 13>;
clock-names = "ahb",
- "tcon-ch0";
+ "tcon-ch0",
+ "lvds-alt";
clock-output-names = "tcon-pixel-clock";
#clock-cells = <0>;
- resets = <&ccu RST_BUS_LCD>;
- reset-names = "lcd";
+ resets = <&ccu RST_BUS_LCD>,
+ <&ccu RST_BUS_LVDS>;
+ reset-names = "lcd",
+ "lvds";
status = "disabled";
ports {
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 53c38deb8a08..74ac7ee9383c 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -50,6 +50,7 @@
#include <dt-bindings/reset/sun8i-a83t-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -581,6 +582,12 @@
sid: eeprom@1c14000 {
compatible = "allwinner,sun8i-a83t-sid";
reg = <0x1c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@34 {
+ reg = <0x34 8>;
+ };
};
crypto: crypto@1c15000 {
@@ -999,9 +1006,9 @@
reg = <0x01c30000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- resets = <&ccu 13>;
+ resets = <&ccu CLK_BUS_EMAC>;
reset-names = "stmmaceth";
- clocks = <&ccu 27>;
+ clocks = <&ccu RST_BUS_EMAC>;
clock-names = "stmmaceth";
status = "disabled";
@@ -1095,7 +1102,7 @@
compatible = "allwinner,sun8i-a83t-r-ccu";
reg = <0x01f01400 0x400>;
clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
- <&ccu 6>;
+ <&ccu CLK_PLL_PERIPH>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -1165,5 +1172,34 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ths: thermal-sensor@1f04000 {
+ compatible = "allwinner,sun8i-a83t-ths";
+ reg = <0x01f04000 0x100>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ cpu1_thermal: cpu1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 2>;
+ };
};
};
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index ac9e26b1d906..45a24441ff18 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -143,6 +143,7 @@
};
&ir {
+ linux,rc-map-name = "rc-tanix-tx3mini";
pinctrl-names = "default";
pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 000000000000..02fbe00cde97
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+ model = "Emlid Neutis N5H3 Developer board";
+ compatible = "emlid,neutis-n5h3-devboard",
+ "emlid,neutis-n5h3",
+ "allwinner,sun8i-h3";
+
+ vdd_cpux: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ gpios-states = <0x1>;
+ states = <1100000 0x0>, <1300000 0x1>;
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 000000000000..eedd5da5dc2f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index c73f59900975..6b149271ef13 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -60,8 +60,7 @@
enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1100000 0>, <1300000 1>;
};
reg_vcc_dram: vcc-dram {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index fe773c72a69b..20217e2ca4d3 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -80,7 +80,7 @@
#cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
@@ -90,7 +90,7 @@
#cooling-cells = <2>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
@@ -100,7 +100,7 @@
#cooling-cells = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
@@ -111,6 +111,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -199,6 +208,26 @@
assigned-clocks = <&ccu CLK_GPU>;
assigned-clock-rates = <384000000>;
};
+
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x400>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 421dfbbfd7ee..8f09a24b36ec 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -44,6 +44,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
@@ -78,25 +79,25 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
@@ -180,6 +181,20 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
+ csi0: csi@1c09000 {
+ compatible = "allwinner,sun8i-r40-csi0",
+ "allwinner,sun7i-a20-csi0";
+ reg = <0x01c09000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_DRAM_CSI0>;
+ clock-names = "bus", "isp", "ram";
+ resets = <&ccu RST_BUS_CSI0>;
+ interconnects = <&mbus 5>;
+ interconnect-names = "dma-mem";
+ status = "disabled";
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
@@ -355,6 +370,20 @@
function = "clk_out_a";
};
+ /omit-if-no-ref/
+ csi0_8bits_pins: csi0-8bits-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10",
+ "PE11";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi0_mclk_pin: csi0-mclk-pin {
+ pins = "PE1";
+ function = "csi0";
+ };
+
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
@@ -373,6 +402,26 @@
function = "i2c0";
};
+ i2c1_pins: i2c1-pins {
+ pins = "PB18", "PB19";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "PB20", "PB21";
+ function = "i2c2";
+ };
+
+ i2c3_pins: i2c3-pins {
+ pins = "PI0", "PI1";
+ function = "i2c3";
+ };
+
+ i2c4_pins: i2c4-pins {
+ pins = "PI2", "PI3";
+ function = "i2c4";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -398,6 +447,36 @@
bias-pull-up;
};
+ /omit-if-no-ref/
+ spi0_pc_pins: spi0-pc-pins {
+ pins = "PC0", "PC1", "PC2";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+ pins = "PC23";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi1_pi_pins: spi1-pi-pins {
+ pins = "PI17", "PI18", "PI19";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+ pins = "PI16";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+ pins = "PI15";
+ function = "spi1";
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
@@ -528,6 +607,8 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -539,6 +620,8 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -550,6 +633,8 @@
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -561,6 +646,60 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
resets = <&ccu RST_BUS_I2C4>;
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi0: spi@1c05000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@1c06000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi2: spi@1c07000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c07000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi3: spi@1c0f000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c0f000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -596,6 +735,14 @@
};
};
+ mbus: dram-controller@1c62000 {
+ compatible = "allwinner,sun8i-r40-mbus";
+ reg = <0x01c62000 0x1000>;
+ clocks = <&ccu 155>;
+ dma-ranges = <0x00000000 0x40000000 0x80000000>;
+ #interconnect-cells = <1>;
+ };
+
tcon_top: tcon-top@1c70000 {
compatible = "allwinner,sun8i-r40-tcon-top";
reg = <0x01c70000 0x1000>;
@@ -718,7 +865,7 @@
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c73000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+ clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV0>;
reset-names = "lcd";
@@ -761,7 +908,7 @@
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c74000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+ clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV1>;
reset-names = "lcd";
@@ -803,7 +950,7 @@
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
@@ -848,7 +995,7 @@
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
- <&ccu 7>, <&ccu 16>;
+ <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
clock-names = "bus", "mod", "pll-0", "pll-1";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
@@ -856,6 +1003,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 23ba56df38f7..81ea50838cd5 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -123,8 +123,6 @@
clock-names = "bus",
"mod";
resets = <&display_clocks 0>;
- assigned-clocks = <&display_clocks 6>;
- assigned-clock-rates = <150000000>;
ports {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 1d900f591d5f..ce4fa6706d06 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -387,16 +387,16 @@
usbphy2: phy@a01800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a01800 0x4>;
- clocks = <&usb_clocks CLK_USB1_HSIC>,
+ clocks = <&usb_clocks CLK_USB1_PHY>,
<&usb_clocks CLK_USB_HSIC>,
- <&usb_clocks CLK_USB1_PHY>;
- clock-names = "hsic_480M",
+ <&usb_clocks CLK_USB1_HSIC>;
+ clock-names = "phy",
"hsic_12M",
- "phy";
- resets = <&usb_clocks RST_USB1_HSIC>,
- <&usb_clocks RST_USB1_PHY>;
- reset-names = "hsic",
- "phy";
+ "hsic_480M";
+ resets = <&usb_clocks RST_USB1_PHY>,
+ <&usb_clocks RST_USB1_HSIC>;
+ reset-names = "phy",
+ "hsic";
status = "disabled";
#phy-cells = <0>;
/* usb1 is always used with HSIC */
@@ -429,16 +429,16 @@
usbphy3: phy@a02800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a02800 0x4>;
- clocks = <&usb_clocks CLK_USB2_HSIC>,
+ clocks = <&usb_clocks CLK_USB2_PHY>,
<&usb_clocks CLK_USB_HSIC>,
- <&usb_clocks CLK_USB2_PHY>;
- clock-names = "hsic_480M",
+ <&usb_clocks CLK_USB2_HSIC>;
+ clock-names = "phy",
"hsic_12M",
- "phy";
- resets = <&usb_clocks RST_USB2_HSIC>,
- <&usb_clocks RST_USB2_PHY>;
- reset-names = "hsic",
- "phy";
+ "hsic_480M";
+ resets = <&usb_clocks RST_USB2_PHY>,
+ <&usb_clocks RST_USB2_HSIC>;
+ reset-names = "phy",
+ "hsic";
status = "disabled";
#phy-cells = <0>;
};
@@ -530,9 +530,7 @@
compatible = "allwinner,sun9i-a80-mmc-config-clk";
reg = <0x01c13000 0x10>;
clocks = <&ccu CLK_BUS_MMC>;
- clock-names = "ahb";
resets = <&ccu RST_BUS_MMC>;
- reset-names = "ahb";
#clock-cells = <1>;
#reset-cells = <1>;
clock-output-names = "mmc0_config", "mmc1_config",
@@ -880,8 +878,12 @@
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
clock-names = "ahb", "tcon-ch0";
- resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
- reset-names = "lcd", "edp";
+ resets = <&ccu RST_BUS_LCD0>,
+ <&ccu RST_BUS_EDP>,
+ <&ccu RST_BUS_LVDS>;
+ reset-names = "lcd",
+ "edp",
+ "lvds";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 000000000000..fc67e30fe212
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+ post-power-on-delay-ms = <200>;
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ status = "okay";
+};
+
+
+&de {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+
+&mmc1 {
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_vcc3v3>;
+ vddio-supply = <&reg_vcc3v3>;
+ shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+ device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "LINEIN", "Line In",
+ "MIC1", "Mic",
+ "MIC2", "Mic",
+ "Mic", "MBIAS";
+};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 0afea59486c2..5e9c3060aa08 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -231,6 +231,12 @@
sid: eeprom@1c14000 {
/* compatible is in per SoC .dtsi file */
reg = <0x1c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@34 {
+ reg = <0x34 4>;
+ };
};
usb_otg: usb@1c19000 {
@@ -553,7 +559,7 @@
mbus: dram-controller@1c62000 {
compatible = "allwinner,sun8i-h3-mbus";
reg = <0x01c62000 0x1000>;
- clocks = <&ccu 113>;
+ clocks = <&ccu CLK_MBUS>;
dma-ranges = <0x00000000 0x40000000 0xc0000000>;
#interconnect-cells = <1>;
};
@@ -811,7 +817,7 @@
compatible = "allwinner,sun8i-h3-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu 6>;
+ <&ccu CLK_PLL_VIDEO>;
clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
@@ -831,7 +837,8 @@
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-h3-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ <&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 000000000000..204fba3614f9
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ spi0 = &spi0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_led {
+ label = "librecomputer:blue:status";
+ gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+ };
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ };
+
+ /* This represents the board's 5V input */
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_vcc_dram: vcc-dram {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-dram";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ enable-active-high;
+ };
+
+ reg_vcc_io: vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-io";
+ /* This is simply a MOSFET switch */
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc3v3>;
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ };
+
+ reg_vcc_usbwifi: vcc-usbwifi {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-usbwifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+ enable-active-high;
+ };
+
+ reg_vdd_cpux: vdd-cpux {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpux";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_vcc5v0>;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ enable-active-high;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc_io>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&pio {
+ vcc-pa-supply = <&reg_vcc_io>;
+ vcc-pc-supply = <&reg_vcc_io>;
+ vcc-pd-supply = <&reg_vcc_io>;
+ vcc-pe-supply = <&reg_vcc_io>;
+ vcc-pf-supply = <&reg_vcc_io>;
+ vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+ vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_vcc_usbwifi>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
index d18eaf4a4a3a..32401457ae71 100644
--- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
@@ -84,7 +84,7 @@
};
};
- emc@7001b000 {
+ external-memory-controller@7001b000 {
emc-timings-1 {
nvidia,ram-code = <1>;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
index 784a529e1f19..861d3f22116b 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
@@ -79,7 +79,7 @@
};
};
- emc@7001b000 {
+ external-memory-controller@7001b000 {
emc-timings-3 {
nvidia,ram-code = <3>;
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
index fb6b3e1a0b1f..c91647d13a50 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
@@ -219,7 +219,7 @@
};
};
- emc@7001b000 {
+ external-memory-controller@7001b000 {
emc-timings-1 {
nvidia,ram-code = <1>;
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
index c7c31d4c1a2b..d2beea0bd15f 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
@@ -68,7 +68,7 @@
};
};
- emc@7001b000 {
+ external-memory-controller@7001b000 {
emc-timings-1 {
nvidia,ram-code = <1>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 413bfb981de8..7f330b1f150f 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -622,9 +622,11 @@
#iommu-cells = <1>;
};
- emc: emc@7001b000 {
+ emc: external-memory-controller@7001b000 {
compatible = "nvidia,tegra124-emc";
reg = <0x0 0x7001b000 0x0 0x1000>;
+ clocks = <&tegra_car TEGRA124_CLK_EMC>;
+ clock-names = "emc";
nvidia,memory-controller = <&mc>;
};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 85fce5bc72d6..be0ab9b84b9a 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -311,6 +311,52 @@
reset-names = "i2c";
};
+ memory-controller@7000f400 {
+ nvidia,use-ram-code;
+
+ emc-tables@hynix {
+ nvidia,ram-code = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ emc-table@166500 {
+ reg = <166500>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <166500>;
+ nvidia,emc-registers = <0x0000000a 0x00000016
+ 0x00000008 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x000004df
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000a 0x000000c8
+ 0x00000003 0x00000006 0x00000004 0x00000008
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe03b0323
+ 0x007fe010 0x00001414 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+
+ emc-table@333000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <333000>;
+ nvidia,emc-registers = <0x00000018 0x00000033
+ 0x00000012 0x00000004 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000bff
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x00000008
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xf0440303
+ 0x007fe010 0x00001414 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ };
+ };
+
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 58cd4e8fa5be..64ec46c72a4c 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -410,7 +410,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index 1fee5ffbfb9c..bfdfb764b25b 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -106,6 +106,16 @@
function = "i2c4";
};
+ pinctrl_i2c5: i2c5 {
+ groups = "i2c5";
+ function = "i2c5";
+ };
+
+ pinctrl_i2c6: i2c6 {
+ groups = "i2c6";
+ function = "i2c6";
+ };
+
pinctrl_nand: nand {
groups = "nand";
function = "nand";
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 7f64e5a616d6..2ec04d7972ef 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -600,7 +600,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index eff74717b37c..ea3961f920a0 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -465,7 +465,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
emmc: sdhc@68400000 {
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 4eddbb8d7fca..13b0d4a7741f 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -773,7 +773,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index cbebb6e4c616..4fc6676f5486 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -414,7 +414,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 48086c5e8549..e500911ce0a5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -323,11 +323,6 @@
};
&i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- status = "okay";
-
gpio5: io-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
@@ -350,11 +345,6 @@
};
&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
tca9548@70 {
compatible = "nxp,pca9548";
pinctrl-0 = <&pinctrl_i2c_mux_reset>;
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index d7caf618f980..b642520199ba 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -407,7 +407,7 @@
pinctrl-0 = <&pinctrl_dspi1>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -420,7 +420,7 @@
};
};
- spi-flash@1 {
+ flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -509,7 +509,7 @@
#gpio-cells = <2>;
};
- lm75@48 {
+ temp-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
};
@@ -524,7 +524,7 @@
reg = <0x52>;
};
- ds1682@6b {
+ elapsed-time-recorder@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
@@ -536,7 +536,12 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- adt7411@4a {
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ };
+
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
@@ -548,7 +553,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- gpio9: sx1503q@20 {
+ gpio9: io-expander@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -559,12 +564,12 @@
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
- lm75@4e {
+ temp-sensor@4e {
compatible = "national,lm75";
reg = <0x4e>;
};
- lm75@4f {
+ temp-sensor@4f {
compatible = "national,lm75";
reg = <0x4f>;
};
@@ -576,17 +581,17 @@
reg = <0x23>;
};
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
- at24c08@54 {
+ eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
};
- tca9548@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
#address-cells = <1>;
@@ -625,7 +630,7 @@
};
};
- tca9548@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
reg = <0x71>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ca6425ad794c..db3899b07992 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -59,6 +59,39 @@
regulator-always-on;
};
+ replicator {
+ compatible = "arm,coresight-static-replicator";
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+ };
+ in-ports {
+ /* replicator input port */
+ port {
+ replicator_in_port0: endpoint {
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
amba: amba {
compatible = "simple-bus";
#address-cells = <1>;
@@ -365,5 +398,107 @@
reg = <0xf8005000 0x1000>;
timeout-sec = <10>;
};
+
+ etb@f8801000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0xf8801000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+ };
+
+ tpiu@f8803000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xf8803000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@f8804000 {
+ compatible = "arm,coresight-static-funnel", "arm,primecell";
+ reg = <0xf8804000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ /* funnel output ports */
+ out-ports {
+ port {
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ funnel0_in_port0: endpoint {
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel0_in_port1: endpoint {
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel0_in_port2: endpoint {
+ };
+ };
+ /* The other input ports are not connect to anything */
+ };
+ };
+
+ ptm@f889c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889c000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
+ };
+ };
+ };
+
+ ptm@f889d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889d000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f5d19cc1f4f2..80373fe0280d 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -592,6 +592,7 @@ CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_STM32_BOOSTER=m
CONFIG_REGULATOR_STM32_VREFBUF=m
+CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_TPS51632=y
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 3b1fd8e7d705..75d729943958 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -345,9 +345,12 @@ static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
}
#endif
+struct omap_system_dma_plat_info;
+
void pdata_quirks_init(const struct of_device_id *);
void omap_auxdata_legacy_init(struct device *dev);
void omap_pcs_legacy_init(int irq, void (*rearm)(void));
+extern struct omap_system_dma_plat_info dma_plat_info;
struct omap_sdrc_params;
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 0c105baa5e88..8cc109cc242a 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -30,10 +30,6 @@
#include <linux/omap-dma.h>
#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static enum omap_reg_offsets dma_common_ch_end;
static const struct omap_dma_reg reg_map[] = {
[REVISION] = { 0x0000, 0x00, OMAP_DMA_REG_32BIT },
@@ -81,42 +77,6 @@ static const struct omap_dma_reg reg_map[] = {
[CCDN] = { 0x00d8, 0x60, OMAP_DMA_REG_32BIT },
};
-static void __iomem *dma_base;
-static inline void dma_write(u32 val, int reg, int lch)
-{
- void __iomem *addr = dma_base;
-
- addr += reg_map[reg].offset;
- addr += reg_map[reg].stride * lch;
-
- writel_relaxed(val, addr);
-}
-
-static inline u32 dma_read(int reg, int lch)
-{
- void __iomem *addr = dma_base;
-
- addr += reg_map[reg].offset;
- addr += reg_map[reg].stride * lch;
-
- return readl_relaxed(addr);
-}
-
-static void omap2_clear_dma(int lch)
-{
- int i;
-
- for (i = CSDP; i <= dma_common_ch_end; i += 1)
- dma_write(0, i, lch);
-}
-
-static void omap2_show_dma_caps(void)
-{
- u8 revision = dma_read(REVISION, 0) & 0xff;
- printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
- revision >> 4, revision & 0xf);
-}
-
static unsigned configure_dma_errata(void)
{
unsigned errata = 0;
@@ -211,82 +171,35 @@ static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
{ "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
};
-static struct omap_system_dma_plat_info dma_plat_info __initdata = {
- .reg_map = reg_map,
- .channel_stride = 0x60,
- .show_dma_caps = omap2_show_dma_caps,
- .clear_dma = omap2_clear_dma,
- .dma_write = dma_write,
- .dma_read = dma_read,
+static struct omap_dma_dev_attr dma_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32,
+ .lch_count = 32,
};
-static struct platform_device_info omap_dma_dev_info __initdata = {
- .name = "omap-dma-engine",
- .id = -1,
- .dma_mask = DMA_BIT_MASK(32),
+struct omap_system_dma_plat_info dma_plat_info = {
+ .reg_map = reg_map,
+ .channel_stride = 0x60,
+ .dma_attr = &dma_attr,
};
/* One time initializations */
-static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
+static int __init omap2_system_dma_init(void)
{
- struct platform_device *pdev;
- struct omap_system_dma_plat_info p;
- struct omap_dma_dev_attr *d;
- struct resource *mem;
- char *name = "omap_dma_system";
-
- p = dma_plat_info;
- p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
- p.errata = configure_dma_errata();
+ dma_plat_info.errata = configure_dma_errata();
if (soc_is_omap24xx()) {
/* DMA slave map for drivers not yet converted to DT */
- p.slave_map = omap24xx_sdma_dt_map;
- p.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
+ dma_plat_info.slave_map = omap24xx_sdma_dt_map;
+ dma_plat_info.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
}
- pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
- if (IS_ERR(pdev)) {
- pr_err("%s: Can't build omap_device for %s:%s.\n",
- __func__, name, oh->name);
- return PTR_ERR(pdev);
- }
-
- omap_dma_dev_info.res = pdev->resource;
- omap_dma_dev_info.num_res = pdev->num_resources;
+ if (!soc_is_omap242x())
+ dma_attr.dev_caps |= IS_RW_PRIORITY;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
- return -EINVAL;
- }
-
- dma_base = ioremap(mem->start, resource_size(mem));
- if (!dma_base) {
- dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
- return -ENOMEM;
- }
-
- d = oh->dev_attr;
-
- if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
- d->dev_caps |= HS_CHANNELS_RESERVED;
-
- if (platform_get_irq_byname(pdev, "0") < 0)
- d->dev_caps |= DMA_ENGINE_HANDLE_IRQ;
-
- /* Check the capabilities register for descriptor loading feature */
- if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
- dma_common_ch_end = CCDN;
- else
- dma_common_ch_end = CCFN;
+ if (soc_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+ dma_attr.dev_caps |= HS_CHANNELS_RESERVED;
return 0;
}
-
-static int __init omap2_system_dma_init(void)
-{
- return omap_hwmod_for_each_by_class("dma",
- omap2_system_dma_init_dev, NULL);
-}
omap_arch_initcall(omap2_system_dma_init);
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 1d55602b3f8f..6b4548f3b57f 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -373,176 +373,6 @@ void omap_device_delete(struct omap_device *od)
kfree(od);
}
-/**
- * omap_device_copy_resources - Add legacy IO and IRQ resources
- * @oh: interconnect target module
- * @pdev: platform device to copy resources to
- *
- * We still have legacy DMA and smartreflex needing resources.
- * Let's populate what they need until we can eventually just
- * remove this function. Note that there should be no need to
- * call this from omap_device_build_from_dt(), nor should there
- * be any need to call it for other devices.
- */
-static int
-omap_device_copy_resources(struct omap_hwmod *oh,
- struct platform_device *pdev)
-{
- struct device_node *np, *child;
- struct property *prop;
- struct resource *res;
- const char *name;
- int error, irq = 0;
-
- if (!oh || !oh->od || !oh->od->pdev)
- return -EINVAL;
-
- np = oh->od->pdev->dev.of_node;
- if (!np) {
- error = -ENODEV;
- goto error;
- }
-
- res = kcalloc(2, sizeof(*res), GFP_KERNEL);
- if (!res)
- return -ENOMEM;
-
- /* Do we have a dts range for the interconnect target module? */
- error = omap_hwmod_parse_module_range(oh, np, res);
-
- /* No ranges, rely on device reg entry */
- if (error)
- error = of_address_to_resource(np, 0, res);
- if (error)
- goto free;
-
- /* SmartReflex needs first IO resource name to be "mpu" */
- res[0].name = "mpu";
-
- /*
- * We may have a configured "ti,sysc" interconnect target with a
- * dts child with the interrupt. If so use the first child's
- * first interrupt for "ti-hwmods" legacy support.
- */
- of_property_for_each_string(np, "compatible", prop, name)
- if (!strncmp("ti,sysc-", name, 8))
- break;
-
- child = of_get_next_available_child(np, NULL);
-
- if (name)
- irq = irq_of_parse_and_map(child, 0);
- if (!irq)
- irq = irq_of_parse_and_map(np, 0);
- if (!irq) {
- error = -EINVAL;
- goto free;
- }
-
- /* Legacy DMA code needs interrupt name to be "0" */
- res[1].start = irq;
- res[1].end = irq;
- res[1].flags = IORESOURCE_IRQ;
- res[1].name = "0";
-
- error = platform_device_add_resources(pdev, res, 2);
-
-free:
- kfree(res);
-
-error:
- WARN(error, "%s: %s device %s failed: %i\n",
- __func__, oh->name, dev_name(&pdev->dev),
- error);
-
- return error;
-}
-
-/**
- * omap_device_build - build and register an omap_device with one omap_hwmod
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- *
- * Convenience function for building and registering a single
- * omap_device record, which in turn builds and registers a
- * platform_device record. See omap_device_build_ss() for more
- * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
- * passes along the return value of omap_device_build_ss().
- */
-struct platform_device __init *omap_device_build(const char *pdev_name,
- int pdev_id,
- struct omap_hwmod *oh,
- void *pdata, int pdata_len)
-{
- int ret = -ENOMEM;
- struct platform_device *pdev;
- struct omap_device *od;
-
- if (!oh || !pdev_name)
- return ERR_PTR(-EINVAL);
-
- if (!pdata && pdata_len > 0)
- return ERR_PTR(-EINVAL);
-
- if (strncmp(oh->name, "smartreflex", 11) &&
- strncmp(oh->name, "dma", 3)) {
- pr_warn("%s need to update %s to probe with dt\na",
- __func__, pdev_name);
- ret = -ENODEV;
- goto odbs_exit;
- }
-
- pdev = platform_device_alloc(pdev_name, pdev_id);
- if (!pdev) {
- ret = -ENOMEM;
- goto odbs_exit;
- }
-
- /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
- if (pdev->id != -1)
- dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
- else
- dev_set_name(&pdev->dev, "%s", pdev->name);
-
- /*
- * Must be called before omap_device_alloc() as oh->od
- * only contains the currently registered omap_device
- * and will get overwritten by omap_device_alloc().
- */
- ret = omap_device_copy_resources(oh, pdev);
- if (ret)
- goto odbs_exit1;
-
- od = omap_device_alloc(pdev, &oh, 1);
- if (IS_ERR(od)) {
- ret = PTR_ERR(od);
- goto odbs_exit1;
- }
-
- ret = platform_device_add_data(pdev, pdata, pdata_len);
- if (ret)
- goto odbs_exit2;
-
- ret = omap_device_register(pdev);
- if (ret)
- goto odbs_exit2;
-
- return pdev;
-
-odbs_exit2:
- omap_device_delete(od);
-odbs_exit1:
- platform_device_put(pdev);
-odbs_exit:
-
- pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
-
- return ERR_PTR(ret);
-}
-
#ifdef CONFIG_PM
static int _od_runtime_suspend(struct device *dev)
{
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index ced775e401cf..f77e76a7841a 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -68,10 +68,6 @@ int omap_device_idle(struct platform_device *pdev);
/* Core code interface */
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
- struct omap_hwmod *oh, void *pdata,
- int pdata_len);
-
struct omap_device *omap_device_alloc(struct platform_device *pdev,
struct omap_hwmod **ohs, int oh_cnt);
void omap_device_delete(struct omap_device *od);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index a136788db839..17d337ed18be 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1853,23 +1853,6 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
}
/**
- * _enable_preprogram - Pre-program an IP block during the _enable() process
- * @oh: struct omap_hwmod *
- *
- * Some IP blocks (such as AESS) require some additional programming
- * after enable before they can enter idle. If a function pointer to
- * do so is present in the hwmod data, then call it and pass along the
- * return value; otherwise, return 0.
- */
-static int _enable_preprogram(struct omap_hwmod *oh)
-{
- if (!oh->class->enable_preprogram)
- return 0;
-
- return oh->class->enable_preprogram(oh);
-}
-
-/**
* _enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
@@ -1952,7 +1935,6 @@ static int _enable(struct omap_hwmod *oh)
_update_sysc_cache(oh);
_enable_sysc(oh);
}
- r = _enable_preprogram(oh);
} else {
if (soc_ops.disable_module)
soc_ops.disable_module(oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 2d0fd99d4713..eebf2fdf434c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -501,7 +501,6 @@ struct omap_hwmod_omap4_prcm {
* @sysc: device SYSCONFIG/SYSSTATUS register data
* @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
* @reset: ptr to fn to be executed in place of the standard hwmod reset fn
- * @enable_preprogram: ptr to fn to be executed during device enable
* @lock: ptr to fn to be executed to lock IP registers
* @unlock: ptr to fn to be executed to unlock IP registers
*
@@ -526,7 +525,6 @@ struct omap_hwmod_class {
struct omap_hwmod_class_sysconfig *sysc;
int (*pre_shutdown)(struct omap_hwmod *oh);
int (*reset)(struct omap_hwmod *oh);
- int (*enable_preprogram)(struct omap_hwmod *oh);
void (*lock)(struct omap_hwmod *oh);
void (*unlock)(struct omap_hwmod *oh);
};
@@ -662,7 +660,6 @@ const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
*
*/
-extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index d49df96b4052..b14442cf6179 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -11,7 +11,6 @@
*/
#include <linux/platform_data/i2c-omap.h>
-#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"
@@ -126,21 +125,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
.flags = HWMOD_16BIT_REG,
};
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32,
- .lch_count = 32,
-};
-
-static struct omap_hwmod omap2420_dma_system_hwmod = {
- .name = "dma",
- .class = &omap2xxx_dma_hwmod_class,
- .main_clk = "core_l3_ck",
- .dev_attr = &dma_dev_attr,
- .flags = HWMOD_NO_IDLEST,
-};
-
/* mailbox */
static struct omap_hwmod omap2420_mailbox_hwmod = {
.name = "mailbox",
@@ -328,22 +312,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
- .master = &omap2420_dma_system_hwmod,
- .slave = &omap2xxx_l3_main_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2420_dma_system_hwmod,
- .clk = "sdma_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
.master = &omap2xxx_l4_core_hwmod,
@@ -435,8 +403,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2420_l4_wkup__gpio2,
&omap2420_l4_wkup__gpio3,
&omap2420_l4_wkup__gpio4,
- &omap2420_dma_system__l3,
- &omap2420_l4_core__dma_system,
&omap2420_l4_core__mailbox,
&omap2420_l4_core__mcbsp1,
&omap2420_l4_core__mcbsp2,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c51ef84ff64d..41a37c74f9a6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,7 +12,6 @@
#include <linux/platform_data/i2c-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
-#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"
@@ -121,21 +120,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = {
.class = &omap2xxx_gpio_hwmod_class,
};
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
- .lch_count = 32,
-};
-
-static struct omap_hwmod omap2430_dma_system_hwmod = {
- .name = "dma",
- .class = &omap2xxx_dma_hwmod_class,
- .main_clk = "core_l3_ck",
- .dev_attr = &dma_dev_attr,
- .flags = HWMOD_NO_IDLEST,
-};
-
/* mailbox */
static struct omap_hwmod omap2430_mailbox_hwmod = {
.name = "mailbox",
@@ -508,22 +492,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
- .master = &omap2430_dma_system_hwmod,
- .slave = &omap2xxx_l3_main_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2430_dma_system_hwmod,
- .clk = "sdma_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
.master = &omap2xxx_l4_core_hwmod,
@@ -635,8 +603,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
&omap2430_l4_wkup__gpio3,
&omap2430_l4_wkup__gpio4,
&omap2430_l4_core__gpio5,
- &omap2430_dma_system__l3,
- &omap2430_l4_core__dma_system,
&omap2430_l4_core__mailbox,
&omap2430_l4_core__mcbsp1,
&omap2430_l4_core__mcbsp2,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index f767524d06b5..a445704d43d9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -7,7 +7,6 @@
*/
#include <linux/types.h>
-#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
@@ -95,23 +94,6 @@ struct omap_hwmod_class omap2xxx_gpio_hwmod_class = {
.sysc = &omap2xxx_gpio_sysc,
};
-/* system dma */
-static struct omap_hwmod_class_sysconfig omap2xxx_dma_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x002c,
- .syss_offs = 0x0028,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_dma_hwmod_class = {
- .name = "dma",
- .sysc = &omap2xxx_dma_sysc,
-};
-
/*
* 'mailbox' class
* mailbox module allowing communication between the on-chip processors
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 26e13d4fa19c..5ef76fe3f33d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -28,29 +28,13 @@ extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main;
extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
-extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
-extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer3;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1;
extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2;
extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0;
extern struct omap_hwmod am33xx_l3_main_hwmod;
extern struct omap_hwmod am33xx_l3_s_hwmod;
@@ -61,29 +45,13 @@ extern struct omap_hwmod am33xx_mpu_hwmod;
extern struct omap_hwmod am33xx_pruss_hwmod;
extern struct omap_hwmod am33xx_gfx_hwmod;
extern struct omap_hwmod am33xx_prcm_hwmod;
-extern struct omap_hwmod am33xx_aes0_hwmod;
-extern struct omap_hwmod am33xx_sha0_hwmod;
extern struct omap_hwmod am33xx_ocmcram_hwmod;
extern struct omap_hwmod am33xx_smartreflex0_hwmod;
extern struct omap_hwmod am33xx_smartreflex1_hwmod;
-extern struct omap_hwmod am33xx_dcan0_hwmod;
-extern struct omap_hwmod am33xx_dcan1_hwmod;
-extern struct omap_hwmod am33xx_elm_hwmod;
-extern struct omap_hwmod am33xx_epwmss0_hwmod;
-extern struct omap_hwmod am33xx_epwmss1_hwmod;
-extern struct omap_hwmod am33xx_epwmss2_hwmod;
extern struct omap_hwmod am33xx_gpmc_hwmod;
extern struct omap_hwmod am33xx_rtc_hwmod;
-extern struct omap_hwmod am33xx_spi0_hwmod;
-extern struct omap_hwmod am33xx_spi1_hwmod;
-extern struct omap_hwmod am33xx_spinlock_hwmod;
extern struct omap_hwmod am33xx_timer1_hwmod;
extern struct omap_hwmod am33xx_timer2_hwmod;
-extern struct omap_hwmod am33xx_timer3_hwmod;
-extern struct omap_hwmod am33xx_timer4_hwmod;
-extern struct omap_hwmod am33xx_timer5_hwmod;
-extern struct omap_hwmod am33xx_timer6_hwmod;
-extern struct omap_hwmod am33xx_timer7_hwmod;
extern struct omap_hwmod am33xx_tpcc_hwmod;
extern struct omap_hwmod am33xx_tptc0_hwmod;
extern struct omap_hwmod am33xx_tptc1_hwmod;
@@ -94,7 +62,6 @@ extern struct omap_hwmod_class am33xx_l4_hwmod_class;
extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
extern struct omap_hwmod_class am33xx_control_hwmod_class;
extern struct omap_hwmod_class am33xx_timer_hwmod_class;
-extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
extern struct omap_hwmod_class am33xx_spi_hwmod_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index 7123c455aaa9..ac7d5bb1a02f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -106,50 +106,6 @@ struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
.user = OCP_USER_MPU,
};
-/* l4 per/ls -> DCAN0 */
-struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_dcan0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> DCAN1 */
-struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_dcan1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_elm_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_epwmss0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_epwmss1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_epwmss2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l3s cfg -> gpmc */
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
@@ -158,30 +114,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.user = OCP_USER_MPU,
};
-/* l4 ls -> spinlock */
-struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_spinlock_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi0 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_spi0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi1 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_spi1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l4 per -> timer2 */
struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
.master = &am33xx_l4_ls_hwmod,
@@ -190,46 +122,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
.user = OCP_USER_MPU,
};
-/* l4 per -> timer3 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_timer3_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4 per -> timer4 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_timer4_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4 per -> timer5 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_timer5_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4 per -> timer6 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_timer6_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4 per -> timer7 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_timer7_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l3 main -> tpcc */
struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
.master = &am33xx_l3_main_hwmod,
@@ -268,19 +160,3 @@ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
.slave = &am33xx_ocmcram_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-
-/* l3 main -> sha0 HIB2 */
-struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
- .master = &am33xx_l3_main_hwmod,
- .slave = &am33xx_sha0_hwmod,
- .clk = "sha0_fck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> AES0 HIB2 */
-struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
- .master = &am33xx_l3_main_hwmod,
- .slave = &am33xx_aes0_hwmod,
- .clk = "aes0_fck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 2df8659612ef..78ec1bc8e3a1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -213,57 +213,7 @@ struct omap_hwmod_class am33xx_emif_hwmod_class = {
.sysc = &am33xx_emif_sysc,
};
-/*
- * 'aes0' class
- */
-static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
- .rev_offs = 0x80,
- .sysc_offs = 0x84,
- .syss_offs = 0x88,
- .sysc_flags = SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
- .name = "aes0",
- .sysc = &am33xx_aes0_sysc,
-};
-
-struct omap_hwmod am33xx_aes0_hwmod = {
- .name = "aes",
- .class = &am33xx_aes0_hwmod_class,
- .clkdm_name = "l3_clkdm",
- .main_clk = "aes0_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
- .rev_offs = 0x100,
- .sysc_offs = 0x110,
- .syss_offs = 0x114,
- .sysc_flags = SYSS_HAS_RESET_STATUS,
-};
-static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
- .name = "sha0",
- .sysc = &am33xx_sha0_sysc,
-};
-
-struct omap_hwmod am33xx_sha0_hwmod = {
- .name = "sham",
- .class = &am33xx_sha0_hwmod_class,
- .clkdm_name = "l3_clkdm",
- .main_clk = "l3_gclk",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
/* ocmcram */
static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
@@ -321,122 +271,6 @@ struct omap_hwmod_class am33xx_control_hwmod_class = {
.name = "control",
};
-/*
- * dcan class
- */
-static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
- .name = "d_can",
-};
-
-/* dcan0 */
-struct omap_hwmod am33xx_dcan0_hwmod = {
- .name = "d_can0",
- .class = &am33xx_dcan_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "dcan0_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* dcan1 */
-struct omap_hwmod am33xx_dcan1_hwmod = {
- .name = "d_can1",
- .class = &am33xx_dcan_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "dcan1_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* elm */
-static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_elm_hwmod_class = {
- .name = "elm",
- .sysc = &am33xx_elm_sysc,
-};
-
-struct omap_hwmod am33xx_elm_hwmod = {
- .name = "elm",
- .class = &am33xx_elm_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* pwmss */
-static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
- .rev_offs = 0x0,
- .sysc_offs = 0x4,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
- .name = "epwmss",
- .sysc = &am33xx_epwmss_sysc,
-};
-
-/* epwmss0 */
-struct omap_hwmod am33xx_epwmss0_hwmod = {
- .name = "epwmss0",
- .class = &am33xx_epwmss_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* epwmss1 */
-struct omap_hwmod am33xx_epwmss1_hwmod = {
- .name = "epwmss1",
- .class = &am33xx_epwmss_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* epwmss2 */
-struct omap_hwmod am33xx_epwmss2_hwmod = {
- .name = "epwmss2",
- .class = &am33xx_epwmss_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
/* gpmc */
static struct omap_hwmod_class_sysconfig gpmc_sysc = {
@@ -501,83 +335,6 @@ struct omap_hwmod am33xx_rtc_hwmod = {
},
};
-/* 'spi' class */
-static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0110,
- .syss_offs = 0x0114,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class am33xx_spi_hwmod_class = {
- .name = "mcspi",
- .sysc = &am33xx_mcspi_sysc,
-};
-
-/* spi0 */
-struct omap_hwmod am33xx_spi0_hwmod = {
- .name = "spi0",
- .class = &am33xx_spi_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "dpll_per_m2_div4_ck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* spi1 */
-struct omap_hwmod am33xx_spi1_hwmod = {
- .name = "spi1",
- .class = &am33xx_spi_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "dpll_per_m2_div4_ck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the
- * processes running on multiple processors
- */
-
-static struct omap_hwmod_class_sysconfig am33xx_spinlock_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
- .name = "spinlock",
- .sysc = &am33xx_spinlock_sysc,
-};
-
-struct omap_hwmod am33xx_spinlock_hwmod = {
- .name = "spinlock",
- .class = &am33xx_spinlock_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/* 'timer 2-7' class */
static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
.rev_offs = 0x0000,
@@ -636,66 +393,6 @@ struct omap_hwmod am33xx_timer2_hwmod = {
},
};
-struct omap_hwmod am33xx_timer3_hwmod = {
- .name = "timer3",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer3_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-struct omap_hwmod am33xx_timer4_hwmod = {
- .name = "timer4",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer4_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-struct omap_hwmod am33xx_timer5_hwmod = {
- .name = "timer5",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer5_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-struct omap_hwmod am33xx_timer6_hwmod = {
- .name = "timer6",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer6_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-struct omap_hwmod am33xx_timer7_hwmod = {
- .name = "timer7",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer7_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/* tpcc */
static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
.name = "tpcc",
@@ -772,21 +469,7 @@ struct omap_hwmod am33xx_tptc2_hwmod = {
static void omap_hwmod_am33xx_clkctrl(void)
{
- CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer3_hwmod, AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer4_hwmod, AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer5_hwmod, AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer6_hwmod, AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer7_hwmod, AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex0_hwmod,
AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
@@ -807,8 +490,6 @@ static void omap_hwmod_am33xx_clkctrl(void)
CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET);
}
static void omap_hwmod_am33xx_rst(void)
@@ -826,21 +507,7 @@ void omap_hwmod_am33xx_reg(void)
static void omap_hwmod_am43xx_clkctrl(void)
{
- CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer3_hwmod, AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer4_hwmod, AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer5_hwmod, AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer6_hwmod, AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer7_hwmod, AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex0_hwmod,
AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
@@ -860,8 +527,6 @@ static void omap_hwmod_am43xx_clkctrl(void)
CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET);
}
static void omap_hwmod_am43xx_rst(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index c63f66427e46..f1ea8c604595 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -81,36 +81,6 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = {
.rst_lines_cnt = ARRAY_SIZE(am33xx_wkup_m3_resets),
};
-/*
- * 'adc/tsc' class
- * TouchScreen Controller (Anolog-To-Digital Converter)
- */
-static struct omap_hwmod_class_sysconfig am33xx_adc_tsc_sysc = {
- .rev_offs = 0x00,
- .sysc_offs = 0x10,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_adc_tsc_hwmod_class = {
- .name = "adc_tsc",
- .sysc = &am33xx_adc_tsc_sysc,
-};
-
-static struct omap_hwmod am33xx_adc_tsc_hwmod = {
- .name = "adc_tsc",
- .class = &am33xx_adc_tsc_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .main_clk = "adc_tsc_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
/*
* Modules omap_hwmod structures
@@ -226,34 +196,6 @@ static struct omap_hwmod am33xx_control_hwmod = {
},
};
-/* lcdc */
-static struct omap_hwmod_class_sysconfig lcdc_sysc = {
- .rev_offs = 0x0,
- .sysc_offs = 0x54,
- .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE,
- .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART,
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_lcdc_hwmod_class = {
- .name = "lcdc",
- .sysc = &lcdc_sysc,
-};
-
-static struct omap_hwmod am33xx_lcdc_hwmod = {
- .name = "lcdc",
- .class = &am33xx_lcdc_hwmod_class,
- .clkdm_name = "lcdc_clkdm",
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
- .main_clk = "lcd_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
/*
* Interfaces
@@ -331,21 +273,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
.user = OCP_USER_MPU,
};
-/* L4 WKUP -> ADC_TSC */
-static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
- .master = &am33xx_l4_wkup_hwmod,
- .slave = &am33xx_adc_tsc_hwmod,
- .clk = "dpll_core_m4_div2_ck",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
- .master = &am33xx_l3_main_hwmod,
- .slave = &am33xx_lcdc_hwmod,
- .clk = "dpll_core_m4_ck",
- .user = OCP_USER_MPU,
-};
-
/* l4 wkup -> timer1 */
static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
.master = &am33xx_l4_wkup_hwmod,
@@ -375,32 +302,14 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__smartreflex1,
&am33xx_l4_wkup__timer1,
&am33xx_l4_wkup__rtc,
- &am33xx_l4_wkup__adc_tsc,
&am33xx_l4_hs__pruss,
- &am33xx_l4_per__dcan0,
- &am33xx_l4_per__dcan1,
&am33xx_l4_ls__timer2,
- &am33xx_l4_ls__timer3,
- &am33xx_l4_ls__timer4,
- &am33xx_l4_ls__timer5,
- &am33xx_l4_ls__timer6,
- &am33xx_l4_ls__timer7,
&am33xx_l3_main__tpcc,
- &am33xx_l4_ls__spinlock,
- &am33xx_l4_ls__elm,
- &am33xx_l4_ls__epwmss0,
- &am33xx_l4_ls__epwmss1,
- &am33xx_l4_ls__epwmss2,
&am33xx_l3_s__gpmc,
- &am33xx_l3_main__lcdc,
- &am33xx_l4_ls__mcspi0,
- &am33xx_l4_ls__mcspi1,
&am33xx_l3_main__tptc0,
&am33xx_l3_main__tptc1,
&am33xx_l3_main__tptc2,
&am33xx_l3_main__ocmc,
- &am33xx_l3_main__sha0,
- &am33xx_l3_main__aes0,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f52438bdfc14..3c8d2b6e887a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -16,7 +16,6 @@
#include <linux/power/smartreflex.h>
#include <linux/platform_data/hsmmc-omap.h>
-#include <linux/omap-dma.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
@@ -833,47 +832,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = {
.class = &omap3xxx_gpio_hwmod_class,
};
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
- .lch_count = 32,
-};
-
-static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x002c,
- .syss_offs = 0x0028,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
- .name = "dma",
- .sysc = &omap3xxx_dma_sysc,
-};
-
-/* dma_system */
-static struct omap_hwmod omap3xxx_dma_system_hwmod = {
- .name = "dma",
- .class = &omap3xxx_dma_hwmod_class,
- .main_clk = "core_l3_ick",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_SDMA_SHIFT,
- },
- },
- .dev_attr = &dma_dev_attr,
- .flags = HWMOD_NO_IDLEST,
-};
-
/*
* 'mcbsp' class
* multi channel buffered serial port controller
@@ -2233,23 +2191,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
- .master = &omap3xxx_dma_system_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .clk = "core_l3_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_dma_system_hwmod,
- .clk = "core_l4_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-
/* l4_core -> mcbsp1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
.master = &omap3xxx_l4_core_hwmod,
@@ -2628,8 +2569,6 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_per__gpio4,
&omap3xxx_l4_per__gpio5,
&omap3xxx_l4_per__gpio6,
- &omap3xxx_dma_system__l3,
- &omap3xxx_l4_core__dma_system,
&omap3xxx_l4_core__mcbsp1,
&omap3xxx_l4_per__mcbsp2,
&omap3xxx_l4_per__mcbsp3,
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index b81f83466c94..d0867dbd788e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -112,165 +112,6 @@ static struct omap_hwmod am43xx_synctimer_hwmod = {
},
};
-static struct omap_hwmod am43xx_timer8_hwmod = {
- .name = "timer8",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer8_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_timer9_hwmod = {
- .name = "timer9",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer9_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_timer10_hwmod = {
- .name = "timer10",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer10_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_timer11_hwmod = {
- .name = "timer11",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer11_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_epwmss3_hwmod = {
- .name = "epwmss3",
- .class = &am33xx_epwmss_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_epwmss4_hwmod = {
- .name = "epwmss4",
- .class = &am33xx_epwmss_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_epwmss5_hwmod = {
- .name = "epwmss5",
- .class = &am33xx_epwmss_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_spi2_hwmod = {
- .name = "spi2",
- .class = &am33xx_spi_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "dpll_per_m2_div4_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_spi3_hwmod = {
- .name = "spi3",
- .class = &am33xx_spi_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "dpll_per_m2_div4_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_spi4_hwmod = {
- .name = "spi4",
- .class = &am33xx_spi_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "dpll_per_m2_div4_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = {
- .name = "ocp2scp",
-};
-
-static struct omap_hwmod am43xx_ocp2scp0_hwmod = {
- .name = "ocp2scp0",
- .class = &am43xx_ocp2scp_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod am43xx_ocp2scp1_hwmod = {
- .name = "ocp2scp1",
- .class = &am43xx_ocp2scp_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "l4ls_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
.rev_offs = 0x0000,
@@ -315,89 +156,6 @@ static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
},
};
-static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = {
- .rev_offs = 0,
- .sysc_offs = 0x0010,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_qspi_hwmod_class = {
- .name = "qspi",
- .sysc = &am43xx_qspi_sysc,
-};
-
-static struct omap_hwmod am43xx_qspi_hwmod = {
- .name = "qspi",
- .class = &am43xx_qspi_hwmod_class,
- .clkdm_name = "l3s_clkdm",
- .main_clk = "l3s_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'adc/tsc' class
- * TouchScreen Controller (Analog-To-Digital Converter)
- */
-static struct omap_hwmod_class_sysconfig am43xx_adc_tsc_sysc = {
- .rev_offs = 0x00,
- .sysc_offs = 0x10,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_adc_tsc_hwmod_class = {
- .name = "adc_tsc",
- .sysc = &am43xx_adc_tsc_sysc,
-};
-
-static struct omap_hwmod am43xx_adc_tsc_hwmod = {
- .name = "adc_tsc",
- .class = &am43xx_adc_tsc_hwmod_class,
- .clkdm_name = "l3s_tsc_clkdm",
- .main_clk = "adc_tsc_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-static struct omap_hwmod_class_sysconfig am43xx_des_sysc = {
- .rev_offs = 0x30,
- .sysc_offs = 0x34,
- .syss_offs = 0x38,
- .sysc_flags = SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am43xx_des_hwmod_class = {
- .name = "des",
- .sysc = &am43xx_des_sysc,
-};
-
-static struct omap_hwmod am43xx_des_hwmod = {
- .name = "des",
- .class = &am43xx_des_hwmod_class,
- .clkdm_name = "l3_clkdm",
- .main_clk = "l3_gclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_PER_DES_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/* dss */
static struct omap_hwmod am43xx_dss_core_hwmod = {
@@ -467,44 +225,6 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
};
-static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
- .rev_offs = 0x0,
- .sysc_offs = 0x104,
- .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
- .name = "vpfe",
- .sysc = &am43xx_vpfe_sysc,
-};
-
-static struct omap_hwmod am43xx_vpfe0_hwmod = {
- .name = "vpfe0",
- .class = &am43xx_vpfe_hwmod_class,
- .clkdm_name = "l3s_clkdm",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
- },
- },
-};
-
-static struct omap_hwmod am43xx_vpfe1_hwmod = {
- .name = "vpfe1",
- .class = &am43xx_vpfe_hwmod_class,
- .clkdm_name = "l3s_clkdm",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
- },
- },
-};
-
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__emif = {
.master = &am33xx_l3_main_hwmod,
@@ -562,13 +282,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = {
- .master = &am33xx_l4_wkup_hwmod,
- .slave = &am43xx_adc_tsc_hwmod,
- .clk = "dpll_core_m4_div2_ck",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
.master = &am33xx_l4_wkup_hwmod,
.slave = &am33xx_timer1_hwmod,
@@ -583,90 +296,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer8 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_timer8_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer9 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_timer9_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer10 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_timer10_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer11 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_timer11_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_epwmss3_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_epwmss4_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_epwmss5_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_spi2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi3 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_spi3_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_spi4_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_ocp2scp0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp1 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_ocp2scp1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
.master = &am33xx_l3_s_hwmod,
.slave = &am43xx_usb_otg_ss0_hwmod,
@@ -681,13 +310,6 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
- .master = &am33xx_l3_s_hwmod,
- .slave = &am43xx_qspi_hwmod,
- .clk = "l3s_gclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
.master = &am43xx_dss_core_hwmod,
.slave = &am33xx_l3_main_hwmod,
@@ -716,53 +338,8 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
- .master = &am43xx_vpfe0_hwmod,
- .slave = &am33xx_l3_main_hwmod,
- .clk = "l3_gclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
- .master = &am43xx_vpfe1_hwmod,
- .slave = &am33xx_l3_main_hwmod,
- .clk = "l3_gclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_vpfe0_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am43xx_vpfe1_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l3_main__des = {
- .master = &am33xx_l3_main_hwmod,
- .slave = &am43xx_des_hwmod,
- .clk = "l3_gclk",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
- &am43xx_l4_ls__timer8,
- &am43xx_l4_ls__timer9,
- &am43xx_l4_ls__timer10,
- &am43xx_l4_ls__timer11,
- &am43xx_l4_ls__epwmss3,
- &am43xx_l4_ls__epwmss4,
- &am43xx_l4_ls__epwmss5,
- &am43xx_l4_ls__mcspi2,
- &am43xx_l4_ls__mcspi3,
- &am43xx_l4_ls__mcspi4,
&am43xx_l3_main__pruss,
&am33xx_mpu__l3_main,
&am33xx_mpu__prcm,
@@ -782,44 +359,19 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_wkup__smartreflex0,
&am43xx_l4_wkup__smartreflex1,
&am43xx_l4_wkup__timer1,
- &am43xx_l4_wkup__adc_tsc,
- &am43xx_l3_s__qspi,
- &am33xx_l4_per__dcan0,
- &am33xx_l4_per__dcan1,
&am33xx_l4_ls__timer2,
- &am33xx_l4_ls__timer3,
- &am33xx_l4_ls__timer4,
- &am33xx_l4_ls__timer5,
- &am33xx_l4_ls__timer6,
- &am33xx_l4_ls__timer7,
&am33xx_l3_main__tpcc,
- &am33xx_l4_ls__spinlock,
- &am33xx_l4_ls__elm,
- &am33xx_l4_ls__epwmss0,
- &am33xx_l4_ls__epwmss1,
- &am33xx_l4_ls__epwmss2,
&am33xx_l3_s__gpmc,
- &am33xx_l4_ls__mcspi0,
- &am33xx_l4_ls__mcspi1,
&am33xx_l3_main__tptc0,
&am33xx_l3_main__tptc1,
&am33xx_l3_main__tptc2,
&am33xx_l3_main__ocmc,
- &am33xx_l3_main__sha0,
- &am33xx_l3_main__aes0,
- &am43xx_l3_main__des,
- &am43xx_l4_ls__ocp2scp0,
- &am43xx_l4_ls__ocp2scp1,
&am43xx_l3_s__usbotgss0,
&am43xx_l3_s__usbotgss1,
&am43xx_dss__l3_main,
&am43xx_l4_ls__dss,
&am43xx_l4_ls__dss_dispc,
&am43xx_l4_ls__dss_rfbi,
- &am43xx_l3__vpfe0,
- &am43xx_l3__vpfe1,
- &am43xx_l4_ls__vpfe0,
- &am43xx_l4_ls__vpfe1,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 292f544bd62d..722c641895ba 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -18,9 +18,6 @@
*/
#include <linux/io.h>
-#include <linux/power/smartreflex.h>
-
-#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
@@ -32,9 +29,6 @@
/* Base offset for all OMAP4 interrupts external to MPUSS */
#define OMAP44XX_IRQ_GIC_START 32
-/* Base offset for all OMAP4 dma requests */
-#define OMAP44XX_DMA_REQ_START 1
-
/*
* IP blocks
*/
@@ -238,43 +232,6 @@ static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = {
*/
/*
- * 'aess' class
- * audio engine sub system
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART |
- MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_aess_hwmod_class = {
- .name = "aess",
- .sysc = &omap44xx_aess_sysc,
- .enable_preprogram = omap_hwmod_aess_preprogram,
-};
-
-/* aess */
-static struct omap_hwmod omap44xx_aess_hwmod = {
- .name = "aess",
- .class = &omap44xx_aess_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "aess_fclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
- .lostcontext_mask = OMAP4430_LOSTCONTEXT_DFF_MASK,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
* 'counter' class
* 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
*/
@@ -399,87 +356,6 @@ static struct omap_hwmod omap44xx_debugss_hwmod = {
};
/*
- * 'dma' class
- * dma controller for data exchange between memory to memory (i.e. internal or
- * external memory) and gp peripherals to memory or memory to gp peripherals
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dma_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x002c,
- .syss_offs = 0x0028,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_dma_hwmod_class = {
- .name = "dma",
- .sysc = &omap44xx_dma_sysc,
-};
-
-/* dma dev_attr */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
- .lch_count = 32,
-};
-
-/* dma_system */
-static struct omap_hwmod omap44xx_dma_system_hwmod = {
- .name = "dma_system",
- .class = &omap44xx_dma_hwmod_class,
- .clkdm_name = "l3_dma_clkdm",
- .main_clk = "l3_div_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET,
- },
- },
- .dev_attr = &dma_dev_attr,
-};
-
-/*
- * 'dmic' class
- * digital microphone controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dmic_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_dmic_hwmod_class = {
- .name = "dmic",
- .sysc = &omap44xx_dmic_sysc,
-};
-
-/* dmic */
-static struct omap_hwmod omap44xx_dmic_hwmod = {
- .name = "dmic",
- .class = &omap44xx_dmic_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "func_dmic_abe_gfclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
* 'dsp' class
* dsp sub-system
*/
@@ -804,39 +680,6 @@ static struct omap_hwmod omap44xx_sha0_hwmod = {
},
};
-/*
- * 'elm' class
- * bch error location module
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_elm_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_elm_hwmod_class = {
- .name = "elm",
- .sysc = &omap44xx_elm_sysc,
-};
-
-/* elm */
-static struct omap_hwmod omap44xx_elm_hwmod = {
- .name = "elm",
- .class = &omap44xx_elm_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET,
- },
- },
-};
/*
* 'emif' class
@@ -982,50 +825,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = {
};
/*
- * 'fdif' class
- * face detection hw accelerator module
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_fdif_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- /*
- * FDIF needs 100 OCP clk cycles delay after a softreset before
- * accessing sysconfig again.
- * The lowest frequency at the moment for L3 bus is 100 MHz, so
- * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
- *
- * TODO: Indicate errata when available.
- */
- .srst_udelay = 2,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_fdif_hwmod_class = {
- .name = "fdif",
- .sysc = &omap44xx_fdif_sysc,
-};
-
-/* fdif */
-static struct omap_hwmod omap44xx_fdif_hwmod = {
- .name = "fdif",
- .class = &omap44xx_fdif_hwmod_class,
- .clkdm_name = "iss_clkdm",
- .main_clk = "fdif_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
* 'gpmc' class
* general purpose memory controller
*/
@@ -1063,45 +862,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
/*
- * 'hsi' class
- * mipi high-speed synchronous serial interface (multichannel and full-duplex
- * serial if)
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_hsi_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
- SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_hsi_hwmod_class = {
- .name = "hsi",
- .sysc = &omap44xx_hsi_sysc,
-};
-
-/* hsi */
-static struct omap_hwmod omap44xx_hsi_hwmod = {
- .name = "hsi",
- .class = &omap44xx_hsi_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
- .main_clk = "hsi_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
* 'ipu' class
* imaging processor unit
*/
@@ -1218,177 +978,6 @@ static struct omap_hwmod omap44xx_iva_hwmod = {
};
/*
- * 'kbd' class
- * keyboard controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_kbd_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_kbd_hwmod_class = {
- .name = "kbd",
- .sysc = &omap44xx_kbd_sysc,
-};
-
-/* kbd */
-static struct omap_hwmod omap44xx_kbd_hwmod = {
- .name = "kbd",
- .class = &omap44xx_kbd_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .main_clk = "sys_32k_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-
-/*
- * 'mcpdm' class
- * multi channel pdm controller (proprietary interface with phoenix power
- * ic)
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_mcpdm_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_mcpdm_hwmod_class = {
- .name = "mcpdm",
- .sysc = &omap44xx_mcpdm_sysc,
-};
-
-/* mcpdm */
-static struct omap_hwmod omap44xx_mcpdm_hwmod = {
- .name = "mcpdm",
- .class = &omap44xx_mcpdm_hwmod_class,
- .clkdm_name = "abe_clkdm",
- /*
- * It's suspected that the McPDM requires an off-chip main
- * functional clock, controlled via I2C. This IP block is
- * currently reset very early during boot, before I2C is
- * available, so it doesn't seem that we have any choice in
- * the kernel other than to avoid resetting it.
- *
- * Also, McPDM needs to be configured to NO_IDLE mode when it
- * is in used otherwise vital clocks will be gated which
- * results 'slow motion' audio playback.
- */
- .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
- .main_clk = "pad_clks_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_PDM_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'mmu' class
- * The memory management unit performs virtual to physical address translation
- * for its requestors.
- */
-
-static struct omap_hwmod_class_sysconfig mmu_sysc = {
- .rev_offs = 0x000,
- .sysc_offs = 0x010,
- .syss_offs = 0x014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
- .name = "mmu",
- .sysc = &mmu_sysc,
-};
-
-/* mmu ipu */
-
-static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
-static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
- { .name = "mmu_cache", .rst_shift = 2 },
-};
-
-/* l3_main_2 -> mmu_ipu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_mmu_ipu_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
- .name = "mmu_ipu",
- .class = &omap44xx_mmu_hwmod_class,
- .clkdm_name = "ducati_clkdm",
- .rst_lines = omap44xx_mmu_ipu_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_ipu_resets),
- .main_clk = "ducati_clk_mux_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
- .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* mmu dsp */
-
-static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
-static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
- { .name = "mmu_cache", .rst_shift = 1 },
-};
-
-/* l4_cfg -> dsp */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_mmu_dsp_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
- .name = "mmu_dsp",
- .class = &omap44xx_mmu_hwmod_class,
- .clkdm_name = "tesla_clkdm",
- .rst_lines = omap44xx_mmu_dsp_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_dsp_resets),
- .main_clk = "dpll_iva_m4x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
- .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
* 'mpu' class
* mpu sub-system
*/
@@ -1434,51 +1023,6 @@ static struct omap_hwmod omap44xx_ocmc_ram_hwmod = {
},
};
-/*
- * 'ocp2scp' class
- * bridge to transform ocp interface protocol to scp (serial control port)
- * protocol
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_ocp2scp_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
- .name = "ocp2scp",
- .sysc = &omap44xx_ocp2scp_sysc,
-};
-
-/* ocp2scp_usb_phy */
-static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
- .name = "ocp2scp_usb_phy",
- .class = &omap44xx_ocp2scp_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
- /*
- * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP
- * block as an "optional clock," and normally should never be
- * specified as the main_clk for an OMAP IP block. However it
- * turns out that this clock is actually the main clock for
- * the ocp2scp_usb_phy IP block:
- * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html
- * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems
- * to be the best workaround.
- */
- .main_clk = "ocp2scp_usb_phy_phy_48m",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
/*
* 'prcm' class
@@ -1585,189 +1129,6 @@ static struct omap_hwmod omap44xx_sl2if_hwmod = {
};
/*
- * 'slimbus' class
- * bidirectional, multi-drop, multi-channel two-line serial interface between
- * the device and external components
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_slimbus_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_slimbus_hwmod_class = {
- .name = "slimbus",
- .sysc = &omap44xx_slimbus_sysc,
-};
-
-/* slimbus1 */
-static struct omap_hwmod_opt_clk slimbus1_opt_clks[] = {
- { .role = "fclk_1", .clk = "slimbus1_fclk_1" },
- { .role = "fclk_0", .clk = "slimbus1_fclk_0" },
- { .role = "fclk_2", .clk = "slimbus1_fclk_2" },
- { .role = "slimbus_clk", .clk = "slimbus1_slimbus_clk" },
-};
-
-static struct omap_hwmod omap44xx_slimbus1_hwmod = {
- .name = "slimbus1",
- .class = &omap44xx_slimbus_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .opt_clks = slimbus1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(slimbus1_opt_clks),
-};
-
-/* slimbus2 */
-static struct omap_hwmod_opt_clk slimbus2_opt_clks[] = {
- { .role = "fclk_1", .clk = "slimbus2_fclk_1" },
- { .role = "fclk_0", .clk = "slimbus2_fclk_0" },
- { .role = "slimbus_clk", .clk = "slimbus2_slimbus_clk" },
-};
-
-static struct omap_hwmod omap44xx_slimbus2_hwmod = {
- .name = "slimbus2",
- .class = &omap44xx_slimbus_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .opt_clks = slimbus2_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(slimbus2_opt_clks),
-};
-
-/*
- * 'smartreflex' class
- * smartreflex module (monitor silicon performance and outputs a measure of
- * performance error)
- */
-
-/* The IP is not compliant to type1 / type2 scheme */
-static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = {
- .rev_offs = -ENODEV,
- .sysc_offs = 0x0038,
- .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap36xx_sr_sysc_fields,
-};
-
-static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
- .name = "smartreflex",
- .sysc = &omap44xx_smartreflex_sysc,
-};
-
-/* smartreflex_core */
-static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
- .sensor_voltdm_name = "core",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
- .name = "smartreflex_core",
- .class = &omap44xx_smartreflex_hwmod_class,
- .clkdm_name = "l4_ao_clkdm",
-
- .main_clk = "smartreflex_core_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .dev_attr = &smartreflex_core_dev_attr,
-};
-
-/* smartreflex_iva */
-static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
- .sensor_voltdm_name = "iva",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
- .name = "smartreflex_iva",
- .class = &omap44xx_smartreflex_hwmod_class,
- .clkdm_name = "l4_ao_clkdm",
- .main_clk = "smartreflex_iva_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .dev_attr = &smartreflex_iva_dev_attr,
-};
-
-/* smartreflex_mpu */
-static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
- .sensor_voltdm_name = "mpu",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
- .name = "smartreflex_mpu",
- .class = &omap44xx_smartreflex_hwmod_class,
- .clkdm_name = "l4_ao_clkdm",
- .main_clk = "smartreflex_mpu_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .dev_attr = &smartreflex_mpu_dev_attr,
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the processes
- * running on multiple processors
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_spinlock_hwmod_class = {
- .name = "spinlock",
- .sysc = &omap44xx_spinlock_sysc,
-};
-
-/* spinlock */
-static struct omap_hwmod omap44xx_spinlock_hwmod = {
- .name = "spinlock",
- .class = &omap44xx_spinlock_hwmod_class,
- .clkdm_name = "l4_cfg_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
* 'timer' class
* general purpose timer module with accurate 1ms tick
* This class contains several variants: ['timer_1ms', 'timer']
@@ -1790,21 +1151,6 @@ static struct omap_hwmod_class omap44xx_timer_1ms_hwmod_class = {
.sysc = &omap44xx_timer_1ms_sysc,
};
-static struct omap_hwmod_class_sysconfig omap44xx_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_timer_hwmod_class = {
- .name = "timer",
- .sysc = &omap44xx_timer_sysc,
-};
-
/* timer1 */
static struct omap_hwmod omap44xx_timer1_hwmod = {
.name = "timer1",
@@ -1821,158 +1167,6 @@ static struct omap_hwmod omap44xx_timer1_hwmod = {
},
};
-/* timer2 */
-static struct omap_hwmod omap44xx_timer2_hwmod = {
- .name = "timer2",
- .class = &omap44xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
- .main_clk = "cm2_dm2_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer3 */
-static struct omap_hwmod omap44xx_timer3_hwmod = {
- .name = "timer3",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .main_clk = "cm2_dm3_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer4 */
-static struct omap_hwmod omap44xx_timer4_hwmod = {
- .name = "timer4",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .main_clk = "cm2_dm4_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer5 */
-static struct omap_hwmod omap44xx_timer5_hwmod = {
- .name = "timer5",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer5_sync_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer6 */
-static struct omap_hwmod omap44xx_timer6_hwmod = {
- .name = "timer6",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer6_sync_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer7 */
-static struct omap_hwmod omap44xx_timer7_hwmod = {
- .name = "timer7",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer7_sync_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer8 */
-static struct omap_hwmod omap44xx_timer8_hwmod = {
- .name = "timer8",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer8_sync_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer9 */
-static struct omap_hwmod omap44xx_timer9_hwmod = {
- .name = "timer9",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .main_clk = "cm2_dm9_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer10 */
-static struct omap_hwmod omap44xx_timer10_hwmod = {
- .name = "timer10",
- .class = &omap44xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
- .main_clk = "cm2_dm10_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer11 */
-static struct omap_hwmod omap44xx_timer11_hwmod = {
- .name = "timer11",
- .class = &omap44xx_timer_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .main_clk = "cm2_dm11_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/*
* 'usb_host_fs' class
* full-speed usb host controller
@@ -2213,30 +1407,6 @@ static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dma_system -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
- .master = &omap44xx_dma_system_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* fdif -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_fdif__l3_main_2 = {
- .master = &omap44xx_fdif_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
- .master = &omap44xx_hsi_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* ipu -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
.master = &omap44xx_ipu_hwmod,
@@ -2317,14 +1487,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
- .master = &omap44xx_aess_hwmod,
- .slave = &omap44xx_l4_abe_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* dsp -> l4_abe */
static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
.master = &omap44xx_dsp_hwmod,
@@ -2389,22 +1551,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_aess_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_aess_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
-};
-
/* l4_wkup -> counter_32k */
static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
.master = &omap44xx_l4_wkup_hwmod,
@@ -2453,22 +1599,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_dma_system_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> dmic */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_dmic_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* dsp -> iva */
static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
.master = &omap44xx_dsp_hwmod,
@@ -2613,22 +1743,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sha0 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_per -> elm */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_elm_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> fdif */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__fdif = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_fdif_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_2 -> gpmc */
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
.master = &omap44xx_l3_main_2_hwmod,
@@ -2637,14 +1751,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> hsi */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_hsi_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_2 -> ipu */
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
.master = &omap44xx_l3_main_2_hwmod,
@@ -2677,22 +1783,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
.user = OCP_USER_MPU,
};
-/* l4_wkup -> kbd */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_kbd_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> mcpdm */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcpdm_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_2 -> ocmc_ram */
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
.master = &omap44xx_l3_main_2_hwmod,
@@ -2701,14 +1791,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> ocp2scp_usb_phy */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp2scp_usb_phy = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_ocp2scp_usb_phy_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* mpu_private -> prcm_mpu */
static struct omap_hwmod_ocp_if omap44xx_mpu_private__prcm_mpu = {
.master = &omap44xx_mpu_private_hwmod,
@@ -2757,62 +1839,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_abe -> slimbus1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__slimbus1 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_slimbus1_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> slimbus1 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__slimbus1_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_slimbus1_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_SDMA,
-};
-
-/* l4_per -> slimbus2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__slimbus2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_slimbus2_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_smartreflex_core_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_iva */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_smartreflex_iva_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_mpu */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_smartreflex_mpu_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_spinlock_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
.master = &omap44xx_l4_wkup_hwmod,
@@ -2821,86 +1847,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer2_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer3_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer4_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer5_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer6_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer7 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer7_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer8 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer8_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer9_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer10 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer10_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer11 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer11_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_cfg -> usb_host_fs */
static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
@@ -2953,9 +1899,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__l3_main_1,
&omap44xx_mpu__l3_main_1,
&omap44xx_debugss__l3_main_2,
- &omap44xx_dma_system__l3_main_2,
- &omap44xx_fdif__l3_main_2,
- &omap44xx_hsi__l3_main_2,
&omap44xx_ipu__l3_main_2,
&omap44xx_iss__l3_main_2,
&omap44xx_iva__l3_main_2,
@@ -2966,7 +1909,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
@@ -2975,16 +1917,12 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
&omap44xx_l4_cfg__ctrl_module_pad_core,
&omap44xx_l4_wkup__ctrl_module_wkup,
&omap44xx_l4_wkup__ctrl_module_pad_wkup,
&omap44xx_l3_instr__debugss,
- &omap44xx_l4_cfg__dma_system,
- &omap44xx_l4_abe__dmic,
&omap44xx_dsp__iva,
/* &omap44xx_dsp__sl2if, */
&omap44xx_l4_cfg__dsp,
@@ -3002,44 +1940,19 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__dss_rfbi,
&omap44xx_l3_main_2__dss_venc,
&omap44xx_l4_per__dss_venc,
- &omap44xx_l4_per__elm,
- &omap44xx_l4_cfg__fdif,
&omap44xx_l3_main_2__gpmc,
- &omap44xx_l4_cfg__hsi,
&omap44xx_l3_main_2__ipu,
&omap44xx_l3_main_2__iss,
/* &omap44xx_iva__sl2if, */
&omap44xx_l3_main_2__iva,
- &omap44xx_l4_wkup__kbd,
- &omap44xx_l4_abe__mcpdm,
- &omap44xx_l3_main_2__mmu_ipu,
- &omap44xx_l4_cfg__mmu_dsp,
&omap44xx_l3_main_2__ocmc_ram,
- &omap44xx_l4_cfg__ocp2scp_usb_phy,
&omap44xx_mpu_private__prcm_mpu,
&omap44xx_l4_wkup__cm_core_aon,
&omap44xx_l4_cfg__cm_core,
&omap44xx_l4_wkup__prm,
&omap44xx_l4_wkup__scrm,
/* &omap44xx_l3_main_2__sl2if, */
- &omap44xx_l4_abe__slimbus1,
- &omap44xx_l4_abe__slimbus1_dma,
- &omap44xx_l4_per__slimbus2,
- &omap44xx_l4_cfg__smartreflex_core,
- &omap44xx_l4_cfg__smartreflex_iva,
- &omap44xx_l4_cfg__smartreflex_mpu,
- &omap44xx_l4_cfg__spinlock,
&omap44xx_l4_wkup__timer1,
- &omap44xx_l4_per__timer2,
- &omap44xx_l4_per__timer3,
- &omap44xx_l4_per__timer4,
- &omap44xx_l4_abe__timer5,
- &omap44xx_l4_abe__timer6,
- &omap44xx_l4_abe__timer7,
- &omap44xx_l4_abe__timer8,
- &omap44xx_l4_per__timer9,
- &omap44xx_l4_per__timer10,
- &omap44xx_l4_per__timer11,
/* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_tll_hs,
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index cc5ad6acab1d..ad398f6bc011 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -17,8 +17,6 @@
#include <linux/io.h>
#include <linux/power/smartreflex.h>
-#include <linux/omap-dma.h>
-
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm1_54xx.h"
@@ -28,10 +26,6 @@
/* Base offset for all OMAP5 interrupts external to MPUSS */
#define OMAP54XX_IRQ_GIC_START 32
-/* Base offset for all OMAP5 dma requests */
-#define OMAP54XX_DMA_REQ_START 1
-
-
/*
* IP blocks
*/
@@ -233,87 +227,6 @@ static struct omap_hwmod omap54xx_counter_32k_hwmod = {
};
/*
- * 'dma' class
- * dma controller for data exchange between memory to memory (i.e. internal or
- * external memory) and gp peripherals to memory or memory to gp peripherals
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_dma_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x002c,
- .syss_offs = 0x0028,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_dma_hwmod_class = {
- .name = "dma",
- .sysc = &omap54xx_dma_sysc,
-};
-
-/* dma dev_attr */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
- .lch_count = 32,
-};
-
-/* dma_system */
-static struct omap_hwmod omap54xx_dma_system_hwmod = {
- .name = "dma_system",
- .class = &omap54xx_dma_hwmod_class,
- .clkdm_name = "dma_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET,
- },
- },
- .dev_attr = &dma_dev_attr,
-};
-
-/*
- * 'dmic' class
- * digital microphone controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_dmic_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_dmic_hwmod_class = {
- .name = "dmic",
- .sysc = &omap54xx_dmic_sysc,
-};
-
-/* dmic */
-static struct omap_hwmod omap54xx_dmic_hwmod = {
- .name = "dmic",
- .class = &omap54xx_dmic_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "dmic_gfclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_ABE_DMIC_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_ABE_DMIC_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
* 'dss' class
* display sub-system
*/
@@ -593,154 +506,8 @@ static struct omap_hwmod omap54xx_emif2_hwmod = {
},
};
-/*
- * 'kbd' class
- * keyboard controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_kbd_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_kbd_hwmod_class = {
- .name = "kbd",
- .sysc = &omap54xx_kbd_sysc,
-};
-
-/* kbd */
-static struct omap_hwmod omap54xx_kbd_hwmod = {
- .name = "kbd",
- .class = &omap54xx_kbd_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .main_clk = "sys_32k_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_WKUPAON_KBD_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'mcpdm' class
- * multi channel pdm controller (proprietary interface with phoenix power
- * ic)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_mcpdm_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_mcpdm_hwmod_class = {
- .name = "mcpdm",
- .sysc = &omap54xx_mcpdm_sysc,
-};
-
-/* mcpdm */
-static struct omap_hwmod omap54xx_mcpdm_hwmod = {
- .name = "mcpdm",
- .class = &omap54xx_mcpdm_hwmod_class,
- .clkdm_name = "abe_clkdm",
- /*
- * It's suspected that the McPDM requires an off-chip main
- * functional clock, controlled via I2C. This IP block is
- * currently reset very early during boot, before I2C is
- * available, so it doesn't seem that we have any choice in
- * the kernel other than to avoid resetting it. XXX This is
- * really a hardware issue workaround: every IP block should
- * be able to source its main functional clock from either
- * on-chip or off-chip sources. McPDM seems to be the only
- * current exception.
- */
-
- .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
- .main_clk = "pad_clks_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_ABE_MCPDM_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_ABE_MCPDM_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'mmu' class
- * The memory management unit performs virtual to physical address translation
- * for its requestors.
- */
-static struct omap_hwmod_class_sysconfig omap54xx_mmu_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_mmu_hwmod_class = {
- .name = "mmu",
- .sysc = &omap54xx_mmu_sysc,
-};
-
-static struct omap_hwmod_rst_info omap54xx_mmu_dsp_resets[] = {
- { .name = "mmu_cache", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap54xx_mmu_dsp_hwmod = {
- .name = "mmu_dsp",
- .class = &omap54xx_mmu_hwmod_class,
- .clkdm_name = "dsp_clkdm",
- .rst_lines = omap54xx_mmu_dsp_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap54xx_mmu_dsp_resets),
- .main_clk = "dpll_iva_h11x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_DSP_DSP_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP54XX_RM_DSP_RSTCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_DSP_DSP_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* mmu ipu */
-static struct omap_hwmod_rst_info omap54xx_mmu_ipu_resets[] = {
- { .name = "mmu_cache", .rst_shift = 2 },
-};
-
-static struct omap_hwmod omap54xx_mmu_ipu_hwmod = {
- .name = "mmu_ipu",
- .class = &omap54xx_mmu_hwmod_class,
- .clkdm_name = "ipu_clkdm",
- .rst_lines = omap54xx_mmu_ipu_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap54xx_mmu_ipu_resets),
- .main_clk = "dpll_core_h22x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_IPU_IPU_CLKCTRL_OFFSET,
- .rstctrl_offs = OMAP54XX_RM_IPU_RSTCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_IPU_IPU_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
/*
* 'mpu' class
@@ -766,76 +533,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
},
};
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the processes
- * running on multiple processors
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_spinlock_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_spinlock_hwmod_class = {
- .name = "spinlock",
- .sysc = &omap54xx_spinlock_sysc,
-};
-
-/* spinlock */
-static struct omap_hwmod omap54xx_spinlock_hwmod = {
- .name = "spinlock",
- .class = &omap54xx_spinlock_hwmod_class,
- .clkdm_name = "l4cfg_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'ocp2scp' class
- * bridge to transform ocp interface protocol to scp (serial control port)
- * protocol
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
- .name = "ocp2scp",
- .sysc = &omap54xx_ocp2scp_sysc,
-};
-
-/* ocp2scp1 */
-static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
- .name = "ocp2scp1",
- .class = &omap54xx_ocp2scp_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
/*
* 'timer' class
@@ -858,21 +555,6 @@ static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = {
.sysc = &omap54xx_timer_1ms_sysc,
};
-static struct omap_hwmod_class_sysconfig omap54xx_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_timer_hwmod_class = {
- .name = "timer",
- .sysc = &omap54xx_timer_sysc,
-};
-
/* timer1 */
static struct omap_hwmod omap54xx_timer1_hwmod = {
.name = "timer1",
@@ -889,158 +571,6 @@ static struct omap_hwmod omap54xx_timer1_hwmod = {
},
};
-/* timer2 */
-static struct omap_hwmod omap54xx_timer2_hwmod = {
- .name = "timer2",
- .class = &omap54xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer2_gfclk_mux",
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4PER_TIMER2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer3 */
-static struct omap_hwmod omap54xx_timer3_hwmod = {
- .name = "timer3",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer3_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4PER_TIMER3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer4 */
-static struct omap_hwmod omap54xx_timer4_hwmod = {
- .name = "timer4",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer4_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4PER_TIMER4_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer5 */
-static struct omap_hwmod omap54xx_timer5_hwmod = {
- .name = "timer5",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer5_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_ABE_TIMER5_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_ABE_TIMER5_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer6 */
-static struct omap_hwmod omap54xx_timer6_hwmod = {
- .name = "timer6",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer6_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_ABE_TIMER6_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_ABE_TIMER6_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer7 */
-static struct omap_hwmod omap54xx_timer7_hwmod = {
- .name = "timer7",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer7_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_ABE_TIMER7_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_ABE_TIMER7_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer8 */
-static struct omap_hwmod omap54xx_timer8_hwmod = {
- .name = "timer8",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .main_clk = "timer8_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_ABE_TIMER8_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_ABE_TIMER8_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer9 */
-static struct omap_hwmod omap54xx_timer9_hwmod = {
- .name = "timer9",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer9_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4PER_TIMER9_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer10 */
-static struct omap_hwmod omap54xx_timer10_hwmod = {
- .name = "timer10",
- .class = &omap54xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer10_gfclk_mux",
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4PER_TIMER10_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer11 */
-static struct omap_hwmod omap54xx_timer11_hwmod = {
- .name = "timer11",
- .class = &omap54xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer11_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4PER_TIMER11_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/*
* 'usb_host_hs' class
* high-speed multi-port usb host controller
@@ -1193,35 +723,6 @@ static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = {
.opt_clks_cnt = ARRAY_SIZE(usb_otg_ss_opt_clks),
};
-
-/*
- * 'ocp2scp' class
- * bridge to transform ocp interface protocol to scp (serial control port)
- * protocol
- */
-/* ocp2scp3 */
-static struct omap_hwmod omap54xx_ocp2scp3_hwmod;
-/* l4_cfg -> ocp2scp3 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_ocp2scp3_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap54xx_ocp2scp3_hwmod = {
- .name = "ocp2scp3",
- .class = &omap54xx_ocp2scp_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
/*
* 'sata' class
* sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx)
@@ -1303,14 +804,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> mmu_dsp */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mmu_dsp = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_mmu_dsp_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* mpu -> l3_main_1 */
static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
.master = &omap54xx_mpu_hwmod,
@@ -1335,14 +828,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3_main_2 -> mmu_ipu */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__mmu_ipu = {
- .master = &omap54xx_l3_main_2_hwmod,
- .slave = &omap54xx_mmu_ipu_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_1 -> l3_main_3 */
static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
.master = &omap54xx_l3_main_1_hwmod,
@@ -1423,22 +908,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__dma_system = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_dma_system_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> dmic */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = {
- .master = &omap54xx_l4_abe_hwmod,
- .slave = &omap54xx_dmic_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU,
-};
-
/* l3_main_2 -> dss */
static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = {
.master = &omap54xx_l3_main_2_hwmod,
@@ -1503,22 +972,6 @@ static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> kbd */
-static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = {
- .master = &omap54xx_l4_wkup_hwmod,
- .slave = &omap54xx_kbd_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> mcpdm */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcpdm = {
- .master = &omap54xx_l4_abe_hwmod,
- .slave = &omap54xx_mcpdm_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU,
-};
-
/* l4_cfg -> mpu */
static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
.master = &omap54xx_l4_cfg_hwmod,
@@ -1527,22 +980,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__spinlock = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_spinlock_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ocp2scp1 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_ocp2scp1_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
.master = &omap54xx_l4_wkup_hwmod,
@@ -1551,86 +988,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer2 = {
- .master = &omap54xx_l4_per_hwmod,
- .slave = &omap54xx_timer2_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer3 = {
- .master = &omap54xx_l4_per_hwmod,
- .slave = &omap54xx_timer3_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer4 = {
- .master = &omap54xx_l4_per_hwmod,
- .slave = &omap54xx_timer4_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer5 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer5 = {
- .master = &omap54xx_l4_abe_hwmod,
- .slave = &omap54xx_timer5_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> timer6 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer6 = {
- .master = &omap54xx_l4_abe_hwmod,
- .slave = &omap54xx_timer6_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> timer7 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer7 = {
- .master = &omap54xx_l4_abe_hwmod,
- .slave = &omap54xx_timer7_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_abe -> timer8 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer8 = {
- .master = &omap54xx_l4_abe_hwmod,
- .slave = &omap54xx_timer8_hwmod,
- .clk = "abe_iclk",
- .user = OCP_USER_MPU,
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer9 = {
- .master = &omap54xx_l4_per_hwmod,
- .slave = &omap54xx_timer9_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer10 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer10 = {
- .master = &omap54xx_l4_per_hwmod,
- .slave = &omap54xx_timer10_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer11 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer11 = {
- .master = &omap54xx_l4_per_hwmod,
- .slave = &omap54xx_timer11_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_cfg -> usb_host_hs */
static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
.master = &omap54xx_l4_cfg_hwmod,
@@ -1673,9 +1030,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l3_main_1__l4_wkup,
&omap54xx_mpu__mpu_private,
&omap54xx_l4_wkup__counter_32k,
- &omap54xx_l4_cfg__dma_system,
- &omap54xx_l4_abe__dmic,
- &omap54xx_l4_cfg__mmu_dsp,
&omap54xx_l3_main_2__dss,
&omap54xx_l3_main_2__dss_dispc,
&omap54xx_l3_main_2__dss_dsi1_a,
@@ -1684,27 +1038,11 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l3_main_2__dss_rfbi,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
- &omap54xx_l3_main_2__mmu_ipu,
- &omap54xx_l4_wkup__kbd,
- &omap54xx_l4_abe__mcpdm,
&omap54xx_l4_cfg__mpu,
- &omap54xx_l4_cfg__spinlock,
- &omap54xx_l4_cfg__ocp2scp1,
&omap54xx_l4_wkup__timer1,
- &omap54xx_l4_per__timer2,
- &omap54xx_l4_per__timer3,
- &omap54xx_l4_per__timer4,
- &omap54xx_l4_abe__timer5,
- &omap54xx_l4_abe__timer6,
- &omap54xx_l4_abe__timer7,
- &omap54xx_l4_abe__timer8,
- &omap54xx_l4_per__timer9,
- &omap54xx_l4_per__timer10,
- &omap54xx_l4_per__timer11,
&omap54xx_l4_cfg__usb_host_hs,
&omap54xx_l4_cfg__usb_tll_hs,
&omap54xx_l4_cfg__usb_otg_ss,
- &omap54xx_l4_cfg__ocp2scp3,
&omap54xx_l4_cfg__sata,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index f8715bd96687..acef3733db4c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -15,9 +15,6 @@
*/
#include <linux/io.h>
-#include <linux/power/smartreflex.h>
-
-#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
@@ -29,10 +26,6 @@
/* Base offset for all DRA7XX interrupts external to MPUSS */
#define DRA7XX_IRQ_GIC_START 32
-/* Base offset for all DRA7XX dma requests */
-#define DRA7XX_DMA_REQ_START 1
-
-
/*
* IP blocks
*/
@@ -284,156 +277,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
};
/*
- * 'dcan' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_dcan_hwmod_class = {
- .name = "dcan",
-};
-
-/* dcan1 */
-static struct omap_hwmod dra7xx_dcan1_hwmod = {
- .name = "dcan1",
- .class = &dra7xx_dcan_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .main_clk = "dcan1_sys_clk_mux",
- .flags = HWMOD_CLKDM_NOAUTO,
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_WKUPAON_DCAN1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* dcan2 */
-static struct omap_hwmod dra7xx_dcan2_hwmod = {
- .name = "dcan2",
- .class = &dra7xx_dcan_hwmod_class,
- .clkdm_name = "l4per2_clkdm",
- .main_clk = "sys_clkin1",
- .flags = HWMOD_CLKDM_NOAUTO,
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER2_DCAN2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* pwmss */
-static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
- .rev_offs = 0x0,
- .sysc_offs = 0x4,
- .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_RESET_STATUS,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-/*
- * epwmss class
- */
-static struct omap_hwmod_class dra7xx_epwmss_hwmod_class = {
- .name = "epwmss",
- .sysc = &dra7xx_epwmss_sysc,
-};
-
-/* epwmss0 */
-static struct omap_hwmod dra7xx_epwmss0_hwmod = {
- .name = "epwmss0",
- .class = &dra7xx_epwmss_hwmod_class,
- .clkdm_name = "l4per2_clkdm",
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- .clkctrl_offs = DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER2_PWMSS1_CONTEXT_OFFSET,
- },
- },
-};
-
-/* epwmss1 */
-static struct omap_hwmod dra7xx_epwmss1_hwmod = {
- .name = "epwmss1",
- .class = &dra7xx_epwmss_hwmod_class,
- .clkdm_name = "l4per2_clkdm",
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- .clkctrl_offs = DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER2_PWMSS2_CONTEXT_OFFSET,
- },
- },
-};
-
-/* epwmss2 */
-static struct omap_hwmod dra7xx_epwmss2_hwmod = {
- .name = "epwmss2",
- .class = &dra7xx_epwmss_hwmod_class,
- .clkdm_name = "l4per2_clkdm",
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- .clkctrl_offs = DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER2_PWMSS3_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'dma' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_dma_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x002c,
- .syss_offs = 0x0028,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_dma_hwmod_class = {
- .name = "dma",
- .sysc = &dra7xx_dma_sysc,
-};
-
-/* dma dev_attr */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
- .lch_count = 32,
-};
-
-/* dma_system */
-static struct omap_hwmod dra7xx_dma_system_hwmod = {
- .name = "dma_system",
- .class = &dra7xx_dma_hwmod_class,
- .clkdm_name = "dma_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET,
- },
- },
- .dev_attr = &dma_dev_attr,
-};
-
-/*
* 'tpcc' class
*
*/
@@ -626,112 +469,9 @@ static struct omap_hwmod dra7xx_dss_hdmi_hwmod = {
.parent_hwmod = &dra7xx_dss_hwmod,
};
-/* AES (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig dra7xx_aes_sysc = {
- .rev_offs = 0x0080,
- .sysc_offs = 0x0084,
- .syss_offs = 0x0088,
- .sysc_flags = SYSS_HAS_RESET_STATUS,
-};
-static struct omap_hwmod_class dra7xx_aes_hwmod_class = {
- .name = "aes",
- .sysc = &dra7xx_aes_sysc,
-};
-/* AES1 */
-static struct omap_hwmod dra7xx_aes1_hwmod = {
- .name = "aes1",
- .class = &dra7xx_aes_hwmod_class,
- .clkdm_name = "l4sec_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4SEC_AES1_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4SEC_AES1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* AES2 */
-static struct omap_hwmod dra7xx_aes2_hwmod = {
- .name = "aes2",
- .class = &dra7xx_aes_hwmod_class,
- .clkdm_name = "l4sec_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4SEC_AES2_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4SEC_AES2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig dra7xx_sha0_sysc = {
- .rev_offs = 0x100,
- .sysc_offs = 0x110,
- .syss_offs = 0x114,
- .sysc_flags = SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class dra7xx_sha0_hwmod_class = {
- .name = "sham",
- .sysc = &dra7xx_sha0_sysc,
-};
-static struct omap_hwmod dra7xx_sha0_hwmod = {
- .name = "sham",
- .class = &dra7xx_sha0_hwmod_class,
- .clkdm_name = "l4sec_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
- * 'elm' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_elm_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_elm_hwmod_class = {
- .name = "elm",
- .sysc = &dra7xx_elm_sysc,
-};
-
-/* elm */
-
-static struct omap_hwmod dra7xx_elm_hwmod = {
- .name = "elm",
- .class = &dra7xx_elm_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_ELM_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER_ELM_CONTEXT_OFFSET,
- },
- },
-};
/*
* 'gpmc' class
@@ -797,55 +537,6 @@ static struct omap_hwmod dra7xx_mpu_hwmod = {
},
};
-/*
- * 'ocp2scp' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_ocp2scp_hwmod_class = {
- .name = "ocp2scp",
- .sysc = &dra7xx_ocp2scp_sysc,
-};
-
-/* ocp2scp1 */
-static struct omap_hwmod dra7xx_ocp2scp1_hwmod = {
- .name = "ocp2scp1",
- .class = &dra7xx_ocp2scp_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* ocp2scp3 */
-static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
- .name = "ocp2scp3",
- .class = &dra7xx_ocp2scp_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
/*
* 'PCIE' class
@@ -1032,103 +723,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
};
/*
- * 'smartreflex' class
- *
- */
-
-/* The IP is not compliant to type1 / type2 scheme */
-static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = {
- .rev_offs = -ENODEV,
- .sysc_offs = 0x0038,
- .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap36xx_sr_sysc_fields,
-};
-
-static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = {
- .name = "smartreflex",
- .sysc = &dra7xx_smartreflex_sysc,
-};
-
-/* smartreflex_core */
-/* smartreflex_core dev_attr */
-static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
- .sensor_voltdm_name = "core",
-};
-
-static struct omap_hwmod dra7xx_smartreflex_core_hwmod = {
- .name = "smartreflex_core",
- .class = &dra7xx_smartreflex_hwmod_class,
- .clkdm_name = "coreaon_clkdm",
- .main_clk = "wkupaon_iclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .dev_attr = &smartreflex_core_dev_attr,
-};
-
-/* smartreflex_mpu */
-/* smartreflex_mpu dev_attr */
-static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
- .sensor_voltdm_name = "mpu",
-};
-
-static struct omap_hwmod dra7xx_smartreflex_mpu_hwmod = {
- .name = "smartreflex_mpu",
- .class = &dra7xx_smartreflex_hwmod_class,
- .clkdm_name = "coreaon_clkdm",
- .main_clk = "wkupaon_iclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .dev_attr = &smartreflex_mpu_dev_attr,
-};
-
-/*
- * 'spinlock' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_spinlock_hwmod_class = {
- .name = "spinlock",
- .sysc = &dra7xx_spinlock_sysc,
-};
-
-/* spinlock */
-static struct omap_hwmod dra7xx_spinlock_hwmod = {
- .name = "spinlock",
- .class = &dra7xx_spinlock_hwmod_class,
- .clkdm_name = "l4cfg_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
* 'timer' class
*
* This class contains several variants: ['timer_1ms', 'timer_secure',
@@ -1225,213 +819,6 @@ static struct omap_hwmod dra7xx_timer4_hwmod = {
},
};
-/* timer5 */
-static struct omap_hwmod dra7xx_timer5_hwmod = {
- .name = "timer5",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "ipu_clkdm",
- .main_clk = "timer5_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_IPU_TIMER5_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_IPU_TIMER5_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer6 */
-static struct omap_hwmod dra7xx_timer6_hwmod = {
- .name = "timer6",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "ipu_clkdm",
- .main_clk = "timer6_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_IPU_TIMER6_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_IPU_TIMER6_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer7 */
-static struct omap_hwmod dra7xx_timer7_hwmod = {
- .name = "timer7",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "ipu_clkdm",
- .main_clk = "timer7_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_IPU_TIMER7_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_IPU_TIMER7_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer8 */
-static struct omap_hwmod dra7xx_timer8_hwmod = {
- .name = "timer8",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "ipu_clkdm",
- .main_clk = "timer8_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_IPU_TIMER8_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_IPU_TIMER8_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer9 */
-static struct omap_hwmod dra7xx_timer9_hwmod = {
- .name = "timer9",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer9_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER_TIMER9_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer10 */
-static struct omap_hwmod dra7xx_timer10_hwmod = {
- .name = "timer10",
- .class = &dra7xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer10_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER_TIMER10_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer11 */
-static struct omap_hwmod dra7xx_timer11_hwmod = {
- .name = "timer11",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer11_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER_TIMER11_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer12 */
-static struct omap_hwmod dra7xx_timer12_hwmod = {
- .name = "timer12",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .main_clk = "secure_32k_clk_src_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET,
- },
- },
-};
-
-/* timer13 */
-static struct omap_hwmod dra7xx_timer13_hwmod = {
- .name = "timer13",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per3_clkdm",
- .main_clk = "timer13_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer14 */
-static struct omap_hwmod dra7xx_timer14_hwmod = {
- .name = "timer14",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per3_clkdm",
- .main_clk = "timer14_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer15 */
-static struct omap_hwmod dra7xx_timer15_hwmod = {
- .name = "timer15",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per3_clkdm",
- .main_clk = "timer15_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer16 */
-static struct omap_hwmod dra7xx_timer16_hwmod = {
- .name = "timer16",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per3_clkdm",
- .main_clk = "timer16_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* DES (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig dra7xx_des_sysc = {
- .rev_offs = 0x0030,
- .sysc_offs = 0x0034,
- .syss_offs = 0x0038,
- .sysc_flags = SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class dra7xx_des_hwmod_class = {
- .name = "des",
- .sysc = &dra7xx_des_sysc,
-};
-
-/* DES */
-static struct omap_hwmod dra7xx_des_hwmod = {
- .name = "des",
- .class = &dra7xx_des_hwmod_class,
- .clkdm_name = "l4sec_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
/*
* 'usb_otg_ss' class
*
@@ -1690,30 +1077,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> dcan1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
- .master = &dra7xx_l4_wkup_hwmod,
- .slave = &dra7xx_dcan1_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> dcan2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__dcan2 = {
- .master = &dra7xx_l4_per2_hwmod,
- .slave = &dra7xx_dcan2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_dma_system_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_1 -> tpcc */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = {
.master = &dra7xx_l3_main_1_hwmod,
@@ -1762,38 +1125,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3_main_1 -> aes1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes1 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_aes1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> aes2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes2 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_aes2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> sha0 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__sha0 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_sha0_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> elm */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_elm_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_1 -> gpmc */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
.master = &dra7xx_l3_main_1_hwmod,
@@ -1810,22 +1141,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> ocp2scp1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_ocp2scp1_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ocp2scp3 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_ocp2scp3_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l3_main_1 -> pciess1 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
.master = &dra7xx_l3_main_1_hwmod,
@@ -1882,30 +1197,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_cfg -> smartreflex_core */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_core = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_smartreflex_core_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_mpu */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_smartreflex_mpu_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_spinlock_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer1 = {
.master = &dra7xx_l4_wkup_hwmod,
@@ -1938,110 +1229,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer4 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_per3 -> timer5 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer5 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer5_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer6 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer6 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer6_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer7 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer7 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer7_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer8 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer8 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer8_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer9 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer9 = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_timer9_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer10 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer10 = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_timer10_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer11 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer11 = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_timer11_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> timer12 */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer12 = {
- .master = &dra7xx_l4_wkup_hwmod,
- .slave = &dra7xx_timer12_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer13 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer13 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer13_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer14 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer14 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer14_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer15 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer15 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer15_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer16 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer16 = {
- .master = &dra7xx_l4_per3_hwmod,
- .slave = &dra7xx_timer16_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> des */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_des_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_per3 -> usb_otg_ss1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
.master = &dra7xx_l4_per3_hwmod,
@@ -2106,30 +1293,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_per2 -> epwmss0 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss0 = {
- .master = &dra7xx_l4_per2_hwmod,
- .slave = &dra7xx_epwmss0_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU,
-};
-
-/* l4_per2 -> epwmss1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss1 = {
- .master = &dra7xx_l4_per2_hwmod,
- .slave = &dra7xx_epwmss1_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU,
-};
-
-/* l4_per2 -> epwmss2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss2 = {
- .master = &dra7xx_l4_per2_hwmod,
- .slave = &dra7xx_epwmss2_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l3_main_1__dmm,
&dra7xx_l3_main_2__l3_instr,
@@ -2146,48 +1309,24 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l3_main_1__bb2d,
&dra7xx_l4_wkup__counter_32k,
&dra7xx_l4_wkup__ctrl_module_wkup,
- &dra7xx_l4_wkup__dcan1,
- &dra7xx_l4_per2__dcan2,
- &dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__tpcc,
&dra7xx_l3_main_1__tptc0,
&dra7xx_l3_main_1__tptc1,
&dra7xx_l3_main_1__dss,
&dra7xx_l3_main_1__dispc,
&dra7xx_l3_main_1__hdmi,
- &dra7xx_l3_main_1__aes1,
- &dra7xx_l3_main_1__aes2,
- &dra7xx_l3_main_1__sha0,
- &dra7xx_l4_per1__elm,
&dra7xx_l3_main_1__gpmc,
&dra7xx_l4_cfg__mpu,
- &dra7xx_l4_cfg__ocp2scp1,
- &dra7xx_l4_cfg__ocp2scp3,
&dra7xx_l3_main_1__pciess1,
&dra7xx_l4_cfg__pciess1,
&dra7xx_l3_main_1__pciess2,
&dra7xx_l4_cfg__pciess2,
&dra7xx_l3_main_1__qspi,
&dra7xx_l4_cfg__sata,
- &dra7xx_l4_cfg__smartreflex_core,
- &dra7xx_l4_cfg__smartreflex_mpu,
- &dra7xx_l4_cfg__spinlock,
&dra7xx_l4_wkup__timer1,
&dra7xx_l4_per1__timer2,
&dra7xx_l4_per1__timer3,
&dra7xx_l4_per1__timer4,
- &dra7xx_l4_per3__timer5,
- &dra7xx_l4_per3__timer6,
- &dra7xx_l4_per3__timer7,
- &dra7xx_l4_per3__timer8,
- &dra7xx_l4_per1__timer9,
- &dra7xx_l4_per1__timer10,
- &dra7xx_l4_per1__timer11,
- &dra7xx_l4_per3__timer13,
- &dra7xx_l4_per3__timer14,
- &dra7xx_l4_per3__timer15,
- &dra7xx_l4_per3__timer16,
- &dra7xx_l4_per1__des,
&dra7xx_l4_per3__usb_otg_ss1,
&dra7xx_l4_per3__usb_otg_ss2,
&dra7xx_l4_per3__usb_otg_ss3,
@@ -2195,15 +1334,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per2__vcp1,
&dra7xx_l3_main_1__vcp2,
&dra7xx_l4_per2__vcp2,
- &dra7xx_l4_per2__epwmss0,
- &dra7xx_l4_per2__epwmss1,
- &dra7xx_l4_per2__epwmss2,
- NULL,
-};
-
-/* GP-only hwmod links */
-static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = {
- &dra7xx_l4_wkup__timer12,
NULL,
};
@@ -2256,8 +1386,5 @@ int __init dra7xx_hwmod_init(void)
}
}
- if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP)
- ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs);
-
return ret;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index ca56563e3fec..c85cb8b5831c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -98,7 +98,6 @@ extern struct omap_hwmod_class omap2_hdq1w_class;
extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;
extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mcspi_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
index d5ddba00bb73..143623bb056d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_reset.c
+++ b/arch/arm/mach-omap2/omap_hwmod_reset.c
@@ -26,8 +26,6 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <sound/aess.h>
-
#include "omap_hwmod.h"
#include "common.h"
@@ -41,28 +39,6 @@
#define OMAP_RTC_MAX_READY_TIME 50
/**
- * omap_hwmod_aess_preprogram - enable AESS internal autogating
- * @oh: struct omap_hwmod *
- *
- * The AESS will not IdleAck to the PRCM until its internal autogating
- * is enabled. Since internal autogating is disabled by default after
- * AESS reset, we must enable autogating after the hwmod code resets
- * the AESS. Returns 0.
- */
-int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
-{
- void __iomem *va;
-
- va = omap_hwmod_get_mpu_rt_va(oh);
- if (!va)
- return -EINVAL;
-
- aess_enable_autogating(va);
-
- return 0;
-}
-
-/**
* omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
* @oh: struct omap_hwmod *
*
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index fb26ba58f3cf..dbb7c2acef31 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -529,6 +529,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata),
+ OF_DEV_AUXDATA("ti,omap-sdma", 0, NULL, &dma_plat_info),
{ /* sentinel */ },
};
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 1581b6a6a416..6953c47d8dc6 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -83,8 +83,6 @@ static int omap2_enter_full_retention(void)
l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
- cpu_cluster_pm_enter();
-
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
@@ -96,8 +94,6 @@ static int omap2_enter_full_retention(void)
OMAP_SDRC_REGADDR(SDRC_POWER));
no_sleep:
- cpu_cluster_pm_exit();
-
clk_enable(osc_ck);
/* clear CORE wake-up events */
@@ -162,25 +158,27 @@ static int omap2_can_sleep(void)
return 0;
if (__clk_is_enabled(osc_ck))
return 0;
- if (omap_dma_running())
- return 0;
return 1;
}
static void omap2_pm_idle(void)
{
- if (!omap2_can_sleep()) {
- if (omap_irq_pending())
- return;
- omap2_enter_mpu_retention();
- return;
- }
+ int error;
if (omap_irq_pending())
return;
+ error = cpu_cluster_pm_enter();
+ if (error || !omap2_can_sleep()) {
+ omap2_enter_mpu_retention();
+ goto out_cpu_cluster_pm;
+ }
+
omap2_enter_full_retention();
+
+out_cpu_cluster_pm:
+ cpu_cluster_pm_exit();
}
static void __init prcm_setup_regs(void)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 54254fc92c2e..e66e9948636c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -25,7 +25,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/omap-dma.h>
#include <linux/omap-gpmc.h>
#include <trace/events/power.h>
@@ -85,7 +84,6 @@ static void omap3_core_save_context(void)
omap3_gpmc_save_context();
/* Save the system control module context, padconf already save above*/
omap3_control_save_context();
- omap_dma_global_context_save();
}
static void omap3_core_restore_context(void)
@@ -96,7 +94,6 @@ static void omap3_core_restore_context(void)
omap3_gpmc_restore_context();
/* Restore the interrupt controller context */
omap_intc_restore_context();
- omap_dma_global_context_restore();
}
/*
@@ -547,9 +544,7 @@ int __init omap3_pm_init(void)
local_irq_disable();
- omap_dma_global_context_save();
omap3_save_secure_ram_context();
- omap_dma_global_context_restore();
local_irq_enable();
}
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 08c99413d02c..7d859994ff95 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -65,18 +65,9 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
static struct omap_system_dma_plat_info *p;
static struct omap_dma_dev_attr *d;
static void omap_clear_dma(int lch);
-static int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
- unsigned char write_prio);
static int enable_1510_mode;
static u32 errata;
-static struct omap_dma_global_context_registers {
- u32 dma_irqenable_l0;
- u32 dma_irqenable_l1;
- u32 dma_ocp_sysconfig;
- u32 dma_gcr;
-} omap_dma_global_context;
-
struct dma_link_info {
int *linked_dmach_q;
int no_of_lchs_linked;
@@ -90,42 +81,6 @@ struct dma_link_info {
};
-static struct dma_link_info *dma_linked_lch;
-
-#ifndef CONFIG_ARCH_OMAP1
-
-/* Chain handling macros */
-#define OMAP_DMA_CHAIN_QINIT(chain_id) \
- do { \
- dma_linked_lch[chain_id].q_head = \
- dma_linked_lch[chain_id].q_tail = \
- dma_linked_lch[chain_id].q_count = 0; \
- } while (0)
-#define OMAP_DMA_CHAIN_QFULL(chain_id) \
- (dma_linked_lch[chain_id].no_of_lchs_linked == \
- dma_linked_lch[chain_id].q_count)
-#define OMAP_DMA_CHAIN_QLAST(chain_id) \
- do { \
- ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \
- dma_linked_lch[chain_id].q_count) \
- } while (0)
-#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
- (0 == dma_linked_lch[chain_id].q_count)
-#define __OMAP_DMA_CHAIN_INCQ(end) \
- ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
-#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
- do { \
- __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
- dma_linked_lch[chain_id].q_count--; \
- } while (0)
-
-#define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \
- do { \
- __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
- dma_linked_lch[chain_id].q_count++; \
- } while (0)
-#endif
-
static int dma_lch_count;
static int dma_chan_count;
static int omap_dma_reserve_channels;
@@ -137,9 +92,6 @@ static inline void disable_lnk(int lch);
static void omap_disable_channel_irq(int lch);
static inline void omap_enable_channel_irq(int lch);
-#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
- __func__);
-
#ifdef CONFIG_ARCH_OMAP15XX
/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
static int omap_dma_in_1510_mode(void)
@@ -278,19 +230,6 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
}
EXPORT_SYMBOL(omap_set_dma_transfer_params);
-void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
-{
- if (dma_omap2plus()) {
- u32 csdp;
-
- csdp = p->dma_read(CSDP, lch);
- csdp &= ~(0x3 << 16);
- csdp |= (mode << 16);
- p->dma_write(csdp, CSDP, lch);
- }
-}
-EXPORT_SYMBOL(omap_set_dma_write_mode);
-
void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
if (dma_omap1() && !dma_omap15xx()) {
@@ -332,25 +271,6 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
}
EXPORT_SYMBOL(omap_set_dma_src_params);
-void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
-{
- omap_set_dma_transfer_params(lch, params->data_type,
- params->elem_count, params->frame_count,
- params->sync_mode, params->trigger,
- params->src_or_dst_synch);
- omap_set_dma_src_params(lch, params->src_port,
- params->src_amode, params->src_start,
- params->src_ei, params->src_fi);
-
- omap_set_dma_dest_params(lch, params->dst_port,
- params->dst_amode, params->dst_start,
- params->dst_ei, params->dst_fi);
- if (params->read_prio || params->write_prio)
- omap_dma_set_prio_lch(lch, params->read_prio,
- params->write_prio);
-}
-EXPORT_SYMBOL(omap_set_dma_params);
-
void omap_set_dma_src_data_pack(int lch, int enable)
{
u32 l;
@@ -507,12 +427,6 @@ static inline void omap_disable_channel_irq(int lch)
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
}
-void omap_enable_dma_irq(int lch, u16 bits)
-{
- dma_chan[lch].enabled_irqs |= bits;
-}
-EXPORT_SYMBOL(omap_enable_dma_irq);
-
void omap_disable_dma_irq(int lch, u16 bits)
{
dma_chan[lch].enabled_irqs &= ~bits;
@@ -532,12 +446,6 @@ static inline void enable_lnk(int lch)
if (dma_chan[lch].next_lch != -1)
l = dma_chan[lch].next_lch | (1 << 15);
-#ifndef CONFIG_ARCH_OMAP1
- if (dma_omap2plus())
- if (dma_chan[lch].next_linked_ch != -1)
- l = dma_chan[lch].next_linked_ch | (1 << 15);
-#endif
-
p->dma_write(l, CLNK_CTRL, lch);
}
@@ -564,42 +472,6 @@ static inline void disable_lnk(int lch)
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
-static inline void omap2_enable_irq_lch(int lch)
-{
- u32 val;
- unsigned long flags;
-
- if (dma_omap1())
- return;
-
- spin_lock_irqsave(&dma_chan_lock, flags);
- /* clear IRQ STATUS */
- p->dma_write(1 << lch, IRQSTATUS_L0, lch);
- /* Enable interrupt */
- val = p->dma_read(IRQENABLE_L0, lch);
- val |= 1 << lch;
- p->dma_write(val, IRQENABLE_L0, lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
-static inline void omap2_disable_irq_lch(int lch)
-{
- u32 val;
- unsigned long flags;
-
- if (dma_omap1())
- return;
-
- spin_lock_irqsave(&dma_chan_lock, flags);
- /* Disable interrupt */
- val = p->dma_read(IRQENABLE_L0, lch);
- val &= ~(1 << lch);
- p->dma_write(val, IRQENABLE_L0, lch);
- /* clear IRQ STATUS */
- p->dma_write(1 << lch, IRQSTATUS_L0, lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch_out)
@@ -628,9 +500,6 @@ int omap_request_dma(int dev_id, const char *dev_name,
if (p->clear_lch_regs)
p->clear_lch_regs(free_ch);
- if (dma_omap2plus())
- omap_clear_dma(free_ch);
-
spin_unlock_irqrestore(&dma_chan_lock, flags);
chan->dev_name = dev_name;
@@ -638,20 +507,10 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->data = data;
chan->flags = 0;
-#ifndef CONFIG_ARCH_OMAP1
- if (dma_omap2plus()) {
- chan->chain_id = -1;
- chan->next_linked_ch = -1;
- }
-#endif
-
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
if (dma_omap1())
chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
- else if (dma_omap2plus())
- chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
- OMAP2_DMA_TRANS_ERR_IRQ;
if (dma_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
@@ -668,11 +527,6 @@ int omap_request_dma(int dev_id, const char *dev_name,
p->dma_write(dev_id, CCR, free_ch);
}
- if (dma_omap2plus()) {
- omap_enable_channel_irq(free_ch);
- omap2_enable_irq_lch(free_ch);
- }
-
*dma_ch_out = free_ch;
return 0;
@@ -689,20 +543,12 @@ void omap_free_dma(int lch)
return;
}
- /* Disable interrupt for logical channel */
- if (dma_omap2plus())
- omap2_disable_irq_lch(lch);
-
/* Disable all DMA interrupts for the channel. */
omap_disable_channel_irq(lch);
/* Make sure the DMA transfer is stopped. */
p->dma_write(0, CCR, lch);
- /* Clear registers */
- if (dma_omap2plus())
- omap_clear_dma(lch);
-
spin_lock_irqsave(&dma_chan_lock, flags);
dma_chan[lch].dev_id = -1;
dma_chan[lch].next_lch = -1;
@@ -711,71 +557,6 @@ void omap_free_dma(int lch)
}
EXPORT_SYMBOL(omap_free_dma);
-/**
- * @brief omap_dma_set_global_params : Set global priority settings for dma
- *
- * @param arb_rate
- * @param max_fifo_depth
- * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
- * DMA_THREAD_RESERVE_ONET
- * DMA_THREAD_RESERVE_TWOT
- * DMA_THREAD_RESERVE_THREET
- */
-void
-omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
-{
- u32 reg;
-
- if (dma_omap1()) {
- printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
- return;
- }
-
- if (max_fifo_depth == 0)
- max_fifo_depth = 1;
- if (arb_rate == 0)
- arb_rate = 1;
-
- reg = 0xff & max_fifo_depth;
- reg |= (0x3 & tparams) << 12;
- reg |= (arb_rate & 0xff) << 16;
-
- p->dma_write(reg, GCR, 0);
-}
-EXPORT_SYMBOL(omap_dma_set_global_params);
-
-/**
- * @brief omap_dma_set_prio_lch : Set channel wise priority settings
- *
- * @param lch
- * @param read_prio - Read priority
- * @param write_prio - Write priority
- * Both of the above can be set with one of the following values :
- * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
- */
-static int
-omap_dma_set_prio_lch(int lch, unsigned char read_prio,
- unsigned char write_prio)
-{
- u32 l;
-
- if (unlikely((lch < 0 || lch >= dma_lch_count))) {
- printk(KERN_ERR "Invalid channel id\n");
- return -EINVAL;
- }
- l = p->dma_read(CCR, lch);
- l &= ~((1 << 6) | (1 << 26));
- if (d->dev_caps & IS_RW_PRIORITY)
- l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
- else
- l |= ((read_prio & 0x1) << 6);
-
- p->dma_write(l, CCR, lch);
-
- return 0;
-}
-
-
/*
* Clears any DMA state so the DMA engine is ready to restart with new buffers
* through omap_start_dma(). Any buffers in flight are discarded.
@@ -926,29 +707,6 @@ EXPORT_SYMBOL(omap_stop_dma);
* Allows changing the DMA callback function or data. This may be needed if
* the driver shares a single DMA channel for multiple dma triggers.
*/
-int omap_set_dma_callback(int lch,
- void (*callback)(int lch, u16 ch_status, void *data),
- void *data)
-{
- unsigned long flags;
-
- if (lch < 0)
- return -ENODEV;
-
- spin_lock_irqsave(&dma_chan_lock, flags);
- if (dma_chan[lch].dev_id == -1) {
- printk(KERN_ERR "DMA callback for not set for free channel\n");
- spin_unlock_irqrestore(&dma_chan_lock, flags);
- return -EINVAL;
- }
- dma_chan[lch].callback = callback;
- dma_chan[lch].data = data;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_set_dma_callback);
-
/*
* Returns current physical source address for the given DMA channel.
* If the channel is running the caller must disable interrupts prior calling
@@ -1048,34 +806,6 @@ int omap_dma_running(void)
return 0;
}
-/*
- * lch_queue DMA will start right after lch_head one is finished.
- * For this DMA link to start, you still need to start (see omap_start_dma)
- * the first one. That will fire up the entire queue.
- */
-void omap_dma_link_lch(int lch_head, int lch_queue)
-{
- if (omap_dma_in_1510_mode()) {
- if (lch_head == lch_queue) {
- p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
- CCR, lch_head);
- return;
- }
- printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
- BUG();
- return;
- }
-
- if ((dma_chan[lch_head].dev_id == -1) ||
- (dma_chan[lch_queue].dev_id == -1)) {
- pr_err("omap_dma: trying to link non requested channels\n");
- dump_stack();
- }
-
- dma_chan[lch_head].next_lch = lch_queue;
-}
-EXPORT_SYMBOL(omap_dma_link_lch);
-
/*----------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_OMAP1
@@ -1136,145 +866,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
#define omap1_dma_irq_handler NULL
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-static int omap2_dma_handle_ch(int ch)
-{
- u32 status = p->dma_read(CSR, ch);
-
- if (!status) {
- if (printk_ratelimit())
- pr_warn("Spurious DMA IRQ for lch %d\n", ch);
- p->dma_write(1 << ch, IRQSTATUS_L0, ch);
- return 0;
- }
- if (unlikely(dma_chan[ch].dev_id == -1)) {
- if (printk_ratelimit())
- pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
- status, ch);
- return 0;
- }
- if (unlikely(status & OMAP_DMA_DROP_IRQ))
- pr_info("DMA synchronization event drop occurred with device %d\n",
- dma_chan[ch].dev_id);
- if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
- printk(KERN_INFO "DMA transaction error with device %d\n",
- dma_chan[ch].dev_id);
- if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
- u32 ccr;
-
- ccr = p->dma_read(CCR, ch);
- ccr &= ~OMAP_DMA_CCR_EN;
- p->dma_write(ccr, CCR, ch);
- dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
- }
- }
- if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
- printk(KERN_INFO "DMA secure error with device %d\n",
- dma_chan[ch].dev_id);
- if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
- printk(KERN_INFO "DMA misaligned error with device %d\n",
- dma_chan[ch].dev_id);
-
- p->dma_write(status, CSR, ch);
- p->dma_write(1 << ch, IRQSTATUS_L0, ch);
- /* read back the register to flush the write */
- p->dma_read(IRQSTATUS_L0, ch);
-
- /* If the ch is not chained then chain_id will be -1 */
- if (dma_chan[ch].chain_id != -1) {
- int chain_id = dma_chan[ch].chain_id;
- dma_chan[ch].state = DMA_CH_NOTSTARTED;
- if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
- dma_chan[dma_chan[ch].next_linked_ch].state =
- DMA_CH_STARTED;
- if (dma_linked_lch[chain_id].chain_mode ==
- OMAP_DMA_DYNAMIC_CHAIN)
- disable_lnk(ch);
-
- if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
- OMAP_DMA_CHAIN_INCQHEAD(chain_id);
-
- status = p->dma_read(CSR, ch);
- p->dma_write(status, CSR, ch);
- }
-
- if (likely(dma_chan[ch].callback != NULL))
- dma_chan[ch].callback(ch, status, dma_chan[ch].data);
-
- return 0;
-}
-
-/* STATUS register count is from 1-32 while our is 0-31 */
-static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
-{
- u32 val, enable_reg;
- int i;
-
- val = p->dma_read(IRQSTATUS_L0, 0);
- if (val == 0) {
- if (printk_ratelimit())
- printk(KERN_WARNING "Spurious DMA IRQ\n");
- return IRQ_HANDLED;
- }
- enable_reg = p->dma_read(IRQENABLE_L0, 0);
- val &= enable_reg; /* Dispatch only relevant interrupts */
- for (i = 0; i < dma_lch_count && val != 0; i++) {
- if (val & 1)
- omap2_dma_handle_ch(i);
- val >>= 1;
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap24xx_dma_irq = {
- .name = "DMA",
- .handler = omap2_dma_irq_handler,
-};
-
-#else
-static struct irqaction omap24xx_dma_irq;
-#endif
-
-/*----------------------------------------------------------------------------*/
-
-/*
- * Note that we are currently using only IRQENABLE_L0 and L1.
- * As the DSP may be using IRQENABLE_L2 and L3, let's not
- * touch those for now.
- */
-void omap_dma_global_context_save(void)
-{
- omap_dma_global_context.dma_irqenable_l0 =
- p->dma_read(IRQENABLE_L0, 0);
- omap_dma_global_context.dma_irqenable_l1 =
- p->dma_read(IRQENABLE_L1, 0);
- omap_dma_global_context.dma_ocp_sysconfig =
- p->dma_read(OCP_SYSCONFIG, 0);
- omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
-}
-
-void omap_dma_global_context_restore(void)
-{
- int ch;
-
- p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
- p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
- OCP_SYSCONFIG, 0);
- p->dma_write(omap_dma_global_context.dma_irqenable_l0,
- IRQENABLE_L0, 0);
- p->dma_write(omap_dma_global_context.dma_irqenable_l1,
- IRQENABLE_L1, 0);
-
- if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
- p->dma_write(0x3 , IRQSTATUS_L0, 0);
-
- for (ch = 0; ch < dma_chan_count; ch++)
- if (dma_chan[ch].dev_id != -1)
- omap_clear_dma(ch);
-}
-
struct omap_system_dma_plat_info *omap_get_plat_info(void)
{
return p;
@@ -1286,7 +877,6 @@ static int omap_system_dma_probe(struct platform_device *pdev)
int ch, ret = 0;
int dma_irq;
char irq_name[4];
- int irq_rel;
p = pdev->dev.platform_data;
if (!p) {
@@ -1312,21 +902,9 @@ static int omap_system_dma_probe(struct platform_device *pdev)
if (!dma_chan)
return -ENOMEM;
- if (dma_omap2plus()) {
- dma_linked_lch = kcalloc(dma_lch_count,
- sizeof(*dma_linked_lch),
- GFP_KERNEL);
- if (!dma_linked_lch) {
- ret = -ENOMEM;
- goto exit_dma_lch_fail;
- }
- }
-
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
- if (dma_omap2plus())
- omap2_disable_irq_lch(ch);
dma_chan[ch].dev_id = -1;
dma_chan[ch].next_lch = -1;
@@ -1359,26 +937,6 @@ static int omap_system_dma_probe(struct platform_device *pdev)
}
}
- if (d->dev_caps & IS_RW_PRIORITY)
- omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
- DMA_DEFAULT_FIFO_DEPTH, 0);
-
- if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) {
- strcpy(irq_name, "0");
- dma_irq = platform_get_irq_byname(pdev, irq_name);
- if (dma_irq < 0) {
- dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
- ret = dma_irq;
- goto exit_dma_lch_fail;
- }
- ret = setup_irq(dma_irq, &omap24xx_dma_irq);
- if (ret) {
- dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
- dma_irq, ret);
- goto exit_dma_lch_fail;
- }
- }
-
/* reserve dma channels 0 and 1 in high security devices on 34xx */
if (d->dev_caps & HS_CHANNELS_RESERVED) {
pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
@@ -1389,34 +947,21 @@ static int omap_system_dma_probe(struct platform_device *pdev)
return 0;
exit_dma_irq_fail:
- dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
- dma_irq, ret);
- for (irq_rel = 0; irq_rel < ch; irq_rel++) {
- dma_irq = platform_get_irq(pdev, irq_rel);
- free_irq(dma_irq, (void *)(irq_rel + 1));
- }
-
-exit_dma_lch_fail:
return ret;
}
static int omap_system_dma_remove(struct platform_device *pdev)
{
- int dma_irq;
+ int dma_irq, irq_rel = 0;
- if (dma_omap2plus()) {
- char irq_name[4];
- strcpy(irq_name, "0");
- dma_irq = platform_get_irq_byname(pdev, irq_name);
- if (dma_irq >= 0)
- remove_irq(dma_irq, &omap24xx_dma_irq);
- } else {
- int irq_rel = 0;
- for ( ; irq_rel < dma_chan_count; irq_rel++) {
- dma_irq = platform_get_irq(pdev, irq_rel);
- free_irq(dma_irq, (void *)(irq_rel + 1));
- }
+ if (dma_omap2plus())
+ return 0;
+
+ for ( ; irq_rel < dma_chan_count; irq_rel++) {
+ dma_irq = platform_get_irq(pdev, irq_rel);
+ free_irq(dma_irq, (void *)(irq_rel + 1));
}
+
return 0;
}
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index d2418021768b..cf4f78617c3f 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -15,6 +15,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
@@ -26,4 +28,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index f0349ef4bfdd..10e9186a76bf 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -1,44 +1,5 @@
-/*
- * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
/*
* AXP803 Integrated Power Management Chip
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index 5634245d11db..c7bd73f35ed8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -1,12 +1,11 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2018 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -65,6 +64,22 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&csi {
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 208373efee49..883f217efb81 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -108,6 +70,22 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&dai {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
new file mode 100644
index 000000000000..578c37490d90
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com>
+ */
+
+/ {
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-912000000 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-microvolt = <1120000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-microvolt = <1160000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1200000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <1240000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <1260000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1152000000 {
+ opp-hz = /bits/ 64 <1152000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 9b9d9157128c..e58db8a6cab6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -87,6 +49,22 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&de {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
index 787ebd805a3b..577f9e1d08a1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -1,9 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Oceanic Systems (UK) Ltd.
- * Copyright (C) 2019 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+// Copyright (C) 2019 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
/dts-v1/;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
index 121e6cc4849b..efb20846de49 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -1,8 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
- * Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
- */
+// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
#include "sun50i-a64-olinuxino.dts"
@@ -21,3 +19,7 @@
cap-mmc-hw-reset;
status = "okay";
};
+
+&pio {
+ vcc-pc-supply = <&reg_eldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 393c1948a495..6dfafa1c879b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -87,6 +49,22 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&de {
status = "okay";
};
@@ -163,6 +141,23 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pg-supply = <&reg_dldo4>;
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <&reg_aldo2>;
+ */
+};
+
&r_rsb {
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index f54a415f2e3b..fde9c7a99b17 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -1,49 +1,11 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -123,6 +85,22 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&dai {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 72d6961dc312..302e24be0a31 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -1,8 +1,5 @@
-/*
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- *
- * Copyright (c) 2018 ARM Ltd.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 ARM Ltd.
#include "sun50i-a64-sopine-baseboard.dts"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index d5b6e8159a33..b26181cf9095 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
#include "sun50i-a64-pine64.dts"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 409523cb0950..2165f238af13 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -84,6 +46,22 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&dai {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 78c82a665c84..3d894b208901 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -1,15 +1,14 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
- *
- */
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
@@ -60,6 +59,7 @@
linux,code = <SW_LID>;
linux,can-disable;
wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
};
};
@@ -98,6 +98,22 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&dai {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 920103ec0046..2f6ea9f3f6a2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -1,47 +1,7 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+// Copyright (c) 2016 ARM Ltd.
/dts-v1/;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 9d20e13f0c02..c48692b06e1f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -1,49 +1,10 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+// Copyright (c) 2016 ARM Ltd.
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -51,6 +12,22 @@
cpvdd-supply = <&reg_eldo1>;
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 970415106dcf..f5df5f705b72 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -1,13 +1,11 @@
-/*
- * Copyright (C) Harald Geyer <harald@ccbib.org>
- * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
- *
- * SPDX-License-Identifier: (GPL-2.0 OR MIT)
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) Harald Geyer <harald@ccbib.org>
+// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -104,6 +102,22 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&ehci1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 27e48234f1c2..862b47dc9dc9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -1,46 +1,7 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- * based on the Allwinner H3 dtsi:
- * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// based on the Allwinner H3 dtsi:
+// Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
#include <dt-bindings/clock/sun50i-a64-ccu.h>
#include <dt-bindings/clock/sun8i-de2.h>
@@ -49,6 +10,7 @@
#include <dt-bindings/reset/sun50i-a64-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -89,6 +51,9 @@
reg = <0>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -97,6 +62,9 @@
reg = <1>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -105,6 +73,9 @@
reg = <2>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -113,6 +84,9 @@
reg = <3>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
L2: l2-cache {
@@ -211,6 +185,69 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ thermal-zones {
+ cpu_thermal: cpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: cpu_alert1 {
+ /* milliCelsius */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu0_thermal: gpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+
+ gpu1_thermal: gpu1-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 2>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -382,6 +419,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_dsi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -485,6 +528,12 @@
sid: eeprom@1c14000 {
compatible = "allwinner,sun50i-a64-sid";
reg = <0x1c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@34 {
+ reg = <0x34 0x8>;
+ };
};
crypto: crypto@1c15000 {
@@ -593,7 +642,7 @@
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 58>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -810,6 +859,18 @@
status = "disabled";
};
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun50i-a64-ths";
+ reg = <0x01c25000 0x100>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -1014,6 +1075,37 @@
status = "disabled";
};
+ dsi: dsi@1ca0000 {
+ compatible = "allwinner,sun50i-a64-mipi-dsi";
+ reg = <0x01ca0000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>;
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ phys = <&dphy>;
+ phy-names = "dphy";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port {
+ dsi_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_dsi>;
+ };
+ };
+ };
+
+ dphy: d-phy@1ca1000 {
+ compatible = "allwinner,sun50i-a64-mipi-dphy",
+ "allwinner,sun6i-a31-mipi-dphy";
+ reg = <0x01ca1000 0x1000>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_DPHY>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun50i-a64-dw-hdmi",
"allwinner,sun8i-a83t-dw-hdmi";
@@ -1051,7 +1143,7 @@
compatible = "allwinner,sun50i-a64-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu 7>;
+ <&ccu CLK_PLL_VIDEO0>;
clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
@@ -1081,7 +1173,8 @@
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ <&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
index c924090331d0..076a0b983101 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
/*
* DTS for Emlid Neutis N5 Dev board.
- *
- * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
*/
/dts-v1/;
@@ -15,14 +15,6 @@
"emlid,neutis-n5",
"allwinner,sun50i-h5";
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
connector {
compatible = "hdmi-connector";
type = "a";
@@ -34,16 +26,6 @@
};
};
- reg_usb0_vbus: usb0-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
- status = "okay";
- };
-
vdd_cpux: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "vdd-cpux";
@@ -59,33 +41,11 @@
};
};
-&codec {
- allwinner,audio-routing =
- "Line Out", "LINEOUT",
- "LINEIN", "Line In",
- "MIC1", "Mic",
- "MIC2", "Mic",
- "Mic", "MBIAS";
- status = "okay";
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
};
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ehci3 {
+&codec {
status = "okay";
};
@@ -106,42 +66,6 @@
};
};
-&mmc0 {
- vmmc-supply = <&reg_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pa_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- usb0_vbus-supply = <&reg_usb0_vbus>;
+&i2c1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
index 5bec574fa108..fc570011495f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -1,73 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
/*
* DTSI for Emlid Neutis N5 SoM.
- *
- * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
*/
/dts-v1/;
#include "sun50i-h5.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
- post-power-on-delay-ms = <200>;
- clocks = <&rtc 1>;
- clock-names = "ext_clock";
- };
-};
-
-&mmc1 {
- vmmc-supply = <&reg_vcc3v3>;
- vqmmc-supply = <&reg_vcc3v3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&r_pio>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
- interrupt-names = "host-wake";
- };
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <&reg_vcc3v3>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
- clock-names = "lpo";
- vbat-supply = <&reg_vcc3v3>;
- vddio-supply = <&reg_vcc3v3>;
- shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
- device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
- };
-};
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
index d68bdfea2271..64d35daf2023 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -1,8 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
+// Copyright (C) 2018 BayLibre, SAS
+// Author: Neil Armstrong <narmstrong@baylibre.com>
/dts-v1/;
#include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
new file mode 100644
index 000000000000..e59d68b525fc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-libretech-all-h3-it.dtsi>
+
+/ {
+ model = "Libre Computer Board ALL-H3-IT H5";
+ compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
new file mode 100644
index 000000000000..df1b9263ad0e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+#include "sun50i-h5-libretech-all-h3-cc.dts"
+
+/ {
+ model = "Libre Computer Board ALL-H5-CC H5";
+ compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&reg_vcc5v0>;
+ };
+};
+
+&codec {
+ /* No line out; only onboard microphone */
+ allwinner,audio-routing =
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+};
+
+/* This board has external PHY */
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ /delete-property/ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 1c7dde84e54d..4f9ba53ffaae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -1,45 +1,6 @@
-/*
- * Copyright (C) 2017 Antony Antony <antony@phenome.org>
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Antony Antony <antony@phenome.org>
+// Copyright (C) 2016 ARM Ltd.
/dts-v1/;
#include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 57a6f45036c1..b059e20813bd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
/dts-v1/;
#include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index e126c1c9f05c..70b5f0998421 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
/dts-v1/;
#include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index d9b3ed257088..cb44bfa5981f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -1,47 +1,7 @@
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-h5-orangepi-pc2.dts, which is:
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-h5-orangepi-pc2.dts, which is:
+// Copyright (C) 2016 ARM Ltd.
/dts-v1/;
#include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index db6ea7b58999..ef5ca6444220 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -1,9 +1,6 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- * Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR X11)
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
/dts-v1/;
#include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index dacf61399527..c95a68541309 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
/dts-v1/;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index e92c4de5bf3b..9893aa64dd0b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
#include <arm/sunxi-h3-h5.dtsi>
@@ -54,21 +15,21 @@
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <3>;
@@ -76,6 +37,16 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu",
+ "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -176,6 +147,32 @@
assigned-clocks = <&ccu CLK_GPU>;
assigned-clock-rates = <384000000>;
};
+
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun50i-h5-ths";
+ reg = <0x01c25000 0x400>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ gpu_thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index f335f7482a73..df6d872c34e2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
/dts-v1/;
@@ -76,6 +74,10 @@
status = "okay";
};
+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -292,3 +294,7 @@
usb0_vbus-supply = <&reg_vcc5v>;
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 4ed3fc2c7734..c311eee52a35 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
/dts-v1/;
@@ -274,6 +272,10 @@
};
};
+&r_ir {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index e098a2475f2d..e7ca75c0d0f7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
#include "sun50i-h6-orangepi.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
index 12e17567ab56..83aab7368889 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
#include "sun50i-h6-orangepi.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index df4cbd7ef96c..37f4c57597d4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
/dts-v1/;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
new file mode 100644
index 000000000000..f4c8966a6497
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+ model = "Pine H64 model B";
+ compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
+
+ /delete-node/ reg_gmac_3v3;
+};
+
+&hdmi_connector {
+ /delete-property/ ddc-en-gpios;
+};
+
+&emac {
+ phy-supply = <&reg_aldo2>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 74899ede00fb..d1c2aa5b3a20 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
/dts-v1/;
@@ -10,7 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Pine H64";
+ model = "Pine H64 model A";
compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
aliases {
@@ -22,9 +20,10 @@
stdout-path = "serial0:115200n8";
};
- connector {
+ hdmi_connector: connector {
compatible = "hdmi-connector";
type = "a";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
port {
hdmi_con_in: endpoint {
@@ -52,6 +51,16 @@
};
};
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usb_vbus: vbus {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
@@ -68,7 +77,7 @@
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
- phy-supply = <&reg_aldo2>;
+ phy-supply = <&reg_gmac_3v3>;
allwinner,rx-delay-ps = <200>;
allwinner,tx-delay-ps = <200>;
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index bccfe1e65b6a..83e6cb0e59ce 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
/dts-v1/;
@@ -45,6 +43,10 @@
status = "okay";
};
+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -85,6 +87,7 @@
};
&r_ir {
+ linux,rc-map-name = "rc-tanix-tx5max";
status = "okay";
};
@@ -102,3 +105,7 @@
&usb2phy {
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 29824081b43b..3329283e38ab 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
@@ -11,6 +9,7 @@
#include <dt-bindings/reset/sun50i-h6-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -70,6 +69,16 @@
clock-output-names = "ext_osc32k";
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu",
+ "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -233,6 +242,12 @@
sid: efuse@3006000 {
compatible = "allwinner,sun50i-h6-sid";
reg = <0x03006000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@14 {
+ reg = <0x14 0x8>;
+ };
};
watchdog: watchdog@30090a0 {
@@ -245,6 +260,16 @@
status = "disabled";
};
+ pwm: pwm@300a000 {
+ compatible = "allwinner,sun50i-h6-pwm";
+ reg = <0x0300a000 0x400>;
+ clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+ clock-names = "mod", "bus";
+ resets = <&ccu RST_BUS_PWM>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
@@ -856,5 +881,31 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ths: thermal-sensor@5070400 {
+ compatible = "allwinner,sun50i-h6-ths";
+ reg = <0x05070400 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
index 27bb925adc8d..10119c7ab437 100644
--- a/arch/arm64/boot/dts/altera/Makefile
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
+dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb \
+ socfpga_stratix10_socdk_nand.dtb
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
new file mode 100644
index 000000000000..9946515b8afd
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+ model = "SoCFPGA Stratix 10 SoCDK";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ hps1 {
+ label = "hps_led1";
+ gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ hps2 {
+ label = "hps_led2";
+ gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ ref_033v: 033-v-ref {
+ compatible = "regulator-fixed";
+ regulator-name = "0.33V";
+ regulator-min-microvolt = <330000>;
+ regulator-max-microvolt = <330000>;
+ };
+
+ soc {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+
+ eccmgr {
+ sdmmca-ecc@ff8c8c00 {
+ compatible = "altr,socfpga-s10-sdmmc-ecc",
+ "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c8c00 0x100>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <14 4>,
+ <15 4>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ nand-bus-width = <16>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0x200000>;
+ };
+
+ partition@200000 {
+ label = "env";
+ reg = <0x200000 0x40000>;
+ };
+
+ partition@240000 {
+ label = "dtb";
+ reg = <0x240000 0x40000>;
+ };
+
+ partition@280000 {
+ label = "kernel";
+ reg = <0x280000 0x2000000>;
+ };
+
+ partition@2280000 {
+ label = "misc";
+ reg = <0x2280000 0x2000000>;
+ };
+
+ partition@4280000 {
+ label = "rootfs";
+ reg = <0x4280000 0x3bd80000>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+ i2c-sda-falling-time-ns = <890>; /* hcnt */
+ i2c-sdl-falling-time-ns = <890>; /* lcnt */
+
+ adc@14 {
+ compatible = "lltc,ltc2497";
+ reg = <0x14>;
+ vref-supply = <&ref_033v>;
+ };
+
+ temp@4c {
+ compatible = "maxim,max1619";
+ reg = <0x4c>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&qspi {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q00a";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <1>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qspi_boot: partition@0 {
+ label = "Boot and fpga data";
+ reg = <0x0 0x034B0000>;
+ };
+
+ qspi_rootfs: partition@4000000 {
+ label = "Root Filesystem - JFFS2";
+ reg = <0x034B0000 0x0EB50000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 63400538d39f..eef0045320f2 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
@@ -29,11 +30,13 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad049d1d..4dec518c4dde 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
/ {
compatible = "amlogic,a1";
@@ -74,6 +75,30 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
+
+ reset: reset-controller@0 {
+ compatible = "amlogic,meson-a1-reset";
+ reg = <0x0 0x0 0x0 0x8c>;
+ #reset-cells = <1>;
+ };
+
+ periphs_pinctrl: pinctrl@0400 {
+ compatible = "amlogic,meson-a1-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank@0400 {
+ reg = <0x0 0x0400 0x0 0x003c>,
+ <0x0 0x0480 0x0 0x0118>;
+ reg-names = "mux", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 62>;
+ };
+
+ };
+
uart_AO: serial@1c00 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04803c3bccfa..aace3d32a3df 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1169,6 +1169,7 @@
interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
resets = <&arb AXG_ARB_TODDR_A>;
+ amlogic,fifo-depth = <512>;
status = "disabled";
};
@@ -1180,6 +1181,7 @@
interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
resets = <&arb AXG_ARB_TODDR_B>;
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -1191,6 +1193,7 @@
interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
resets = <&arb AXG_ARB_TODDR_C>;
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -1202,6 +1205,7 @@
interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
resets = <&arb AXG_ARB_FRDDR_A>;
+ amlogic,fifo-depth = <512>;
status = "disabled";
};
@@ -1213,6 +1217,7 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
resets = <&arb AXG_ARB_FRDDR_B>;
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -1224,6 +1229,7 @@
interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
resets = <&arb AXG_ARB_FRDDR_C>;
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 7fabc8d9654a..abe04f4ad7d8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1968,6 +1968,29 @@
};
};
+ vdec: video-decoder@ff620000 {
+ compatible = "amlogic,g12a-vdec";
+ reg = <0x0 0xff620000 0x0 0x10000>,
+ <0x0 0xffd0e180 0x0 0xe4>;
+ reg-names = "dos", "esparser";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "vdec", "esparser";
+
+ amlogic,ao-sysctrl = <&rti>;
+ amlogic,canvas = <&canvas>;
+
+ clocks = <&clkc CLKID_PARSER>,
+ <&clkc CLKID_DOS>,
+ <&clkc CLKID_VDEC_1>,
+ <&clkc CLKID_VDEC_HEVC>,
+ <&clkc CLKID_VDEC_HEVCF>;
+ clock-names = "dos_parser", "dos", "vdec_1",
+ "vdec_hevc", "vdec_hevcf";
+ resets = <&reset RESET_PARSER>;
+ reset-names = "esparser";
+ };
+
vpu: vpu@ff900000 {
compatible = "amlogic,meson-g12a-vpu";
reg = <0x0 0xff900000 0x0 0x100000>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index b3ba2fda8af8..03054c478896 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -106,6 +106,7 @@
resets = <&arb AXG_ARB_TODDR_A>,
<&clkc_audio AUD_RESET_TODDR_A>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <512>;
status = "disabled";
};
@@ -120,6 +121,7 @@
resets = <&arb AXG_ARB_TODDR_B>,
<&clkc_audio AUD_RESET_TODDR_B>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -134,6 +136,7 @@
resets = <&arb AXG_ARB_TODDR_C>,
<&clkc_audio AUD_RESET_TODDR_C>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -148,6 +151,7 @@
resets = <&arb AXG_ARB_FRDDR_A>,
<&clkc_audio AUD_RESET_FRDDR_A>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <512>;
status = "disabled";
};
@@ -162,6 +166,7 @@
resets = <&arb AXG_ARB_FRDDR_B>,
<&clkc_audio AUD_RESET_FRDDR_B>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -176,6 +181,7 @@
resets = <&arb AXG_ARB_FRDDR_C>,
<&clkc_audio AUD_RESET_FRDDR_C>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
new file mode 100644
index 000000000000..248b018c83d5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+
+ update-button {
+ label = "update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <1300000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = &ethmac;
+ spi0 = &spifc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+ status = "disabled";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ power-button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+ };
+
+ vcc_card: regulator-vcc_card {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_CARD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddio_ao3v3>;
+
+ gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc5v: regulator-vcc5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&ao_5v>;
+
+ gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&ao_5v>;
+ regulator-always-on;
+ };
+
+ vddio_ao3v3: regulator-vddio_ao3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ao_5v>;
+ regulator-always-on;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddio_ao3v3>;
+ regulator-always-on;
+ };
+
+ vddio_card: regulator-vddio-card {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_CARD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+
+ regulator-settling-time-up-us = <200>;
+ regulator-settling-time-down-us = <50000>;
+ };
+};
+
+&cec_AO {
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+ status = "okay";
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&ethmac {
+ pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ reg = <0>;
+ max-speed = <1000>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pinctrl_periphs {
+ /*
+ * Make sure the reset pin of the usb HUB is driven high to take
+ * it out of reset.
+ */
+ usb1_rst_pins: usb1_rst_irq {
+ mux {
+ groups = "GPIODV_3";
+ function = "gpio_periphs";
+ bias-disable;
+ output-high;
+ };
+ };
+
+ /* Make sure the phy irq pin is properly configured as input */
+ eth_phy_irq_pins: eth_phy_irq {
+ mux {
+ groups = "GPIOZ_15";
+ function = "gpio_periphs";
+ bias-disable;
+ output-disable;
+ };
+ };
+};
+
+&hdmi_tx {
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc5v>;
+ status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&i2c_C {
+ pinctrl-0 = <&i2c_c_dv18_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtc: rtc@51 {
+ reg = <0x51>;
+ compatible = "nxp,pcf8563";
+ #clock-cells = <0>;
+ clock-output-names = "rtc_clkout";
+ };
+};
+
+&pwm_AO_ab {
+ pinctrl-0 = <&pwm_ao_a_3_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+ status = "okay";
+};
+
+&pwm_ab {
+ pinctrl-0 = <&pwm_b_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+ status = "okay";
+};
+
+&pwm_ef {
+ pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vddio_ao18>;
+ status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vcc_card>;
+ vqmmc-supply = <&vddio_card>;
+
+ status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddio_ao3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ status = "okay";
+};
+
+&spifc {
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ gd25lq128: spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <12000000>;
+ };
+};
+
+&uart_AO {
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb1_rst_pins>;
+ pinctrl-names = "default";
+ phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+ phy-supply = <&vcc5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
new file mode 100644
index 000000000000..2f1f829450a2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+/ {
+ compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+ model = "Videostrong KII Pro";
+
+ leds {
+ compatible = "gpio-leds";
+ status {
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ button-reset {
+ label = "reset";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+};
+
+
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4335a0";
+ };
+};
+
+
+
+&ethmac {
+ status = "okay";
+ pinctrl-0 = <&eth_rmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&eth_phy0>;
+ phy-mode = "rmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101GR (0x02430c54) */
+ reg = <0>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
new file mode 100644
index 000000000000..100a1cfeea15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+ compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
+ "amlogic,meson-gxl";
+ model = "Libre Computer AML-S905D-PC";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index ed33d8efaf62..259d86399390 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -533,6 +533,15 @@
};
};
+ i2c_c_dv18_pins: i2c_c_dv18 {
+ mux {
+ groups = "i2c_sck_c_dv19",
+ "i2c_sda_c_dv18";
+ function = "i2c_c";
+ bias-disable;
+ };
+ };
+
eth_pins: eth_c {
mux {
groups = "eth_mdio",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
new file mode 100644
index 000000000000..444c249863cb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+ compatible = "libretech,aml-s912-pc", "amlogic,s912",
+ "amlogic,meson-gxm";
+ model = "Libre Computer AML-S912-PC";
+
+ typec2_vbus: regulator-typec2_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "TYPEC2_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v>;
+
+ gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&pinctrl_periphs {
+ /*
+ * Make sure the irq pin of the TYPE C controller is not driven
+ * by the SoC.
+ */
+ fusb302_irq_pins: fusb302_irq {
+ mux {
+ groups = "GPIODV_0";
+ function = "gpio_periphs";
+ bias-pull-up;
+ output-disable;
+ };
+ };
+};
+
+&i2c_C {
+ fusb302@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+
+ pinctrl-0 = <&fusb302_irq_pins>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+ vbus-supply = <&typec2_vbus>;
+
+ status = "okay";
+ };
+};
+
+&usb2_phy2 {
+ phy-supply = <&typec2_vbus>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 7894a5458dbc..d847a3fcbc85 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -201,6 +201,7 @@
resets = <&arb AXG_ARB_TODDR_A>,
<&clkc_audio AUD_RESET_TODDR_A>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <8192>;
status = "disabled";
};
@@ -215,6 +216,7 @@
resets = <&arb AXG_ARB_TODDR_B>,
<&clkc_audio AUD_RESET_TODDR_B>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -229,6 +231,7 @@
resets = <&arb AXG_ARB_TODDR_C>,
<&clkc_audio AUD_RESET_TODDR_C>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -243,6 +246,7 @@
resets = <&arb AXG_ARB_FRDDR_A>,
<&clkc_audio AUD_RESET_FRDDR_A>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <512>;
status = "disabled";
};
@@ -257,6 +261,7 @@
resets = <&arb AXG_ARB_FRDDR_B>,
<&clkc_audio AUD_RESET_FRDDR_B>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -271,6 +276,7 @@
resets = <&arb AXG_ARB_FRDDR_C>,
<&clkc_audio AUD_RESET_FRDDR_C>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -412,6 +418,7 @@
resets = <&arb AXG_ARB_TODDR_D>,
<&clkc_audio AUD_RESET_TODDR_D>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
@@ -426,6 +433,7 @@
resets = <&arb AXG_ARB_FRDDR_D>,
<&clkc_audio AUD_RESET_FRDDR_D>;
reset-names = "arb", "rst";
+ amlogic,fifo-depth = <256>;
status = "disabled";
};
};
@@ -482,6 +490,10 @@
power-domains = <&pwrc PWRC_SM1_VPU_ID>;
};
+&vdec {
+ compatible = "amlogic,sm1-vdec";
+};
+
&vpu {
power-domains = <&pwrc PWRC_SM1_VPU_ID>;
};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e24..7a2c7f9c2660 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
};
- uart_clk: uart-clk {
- compatible = "fixed-clock";
- clock-frequency = <500000000>;
- #clock-cells = <0>;
- };
-
soc {
gpio0: gpio@50027000 {
porta: gpio-controller@0 {
@@ -173,21 +167,18 @@
&uart0 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0_default>;
};
&uart1 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
};
&uart2 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_default>;
};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index d65453f99a99..fa6e6905f588 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -4,6 +4,7 @@
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
+#include <dt-bindings/clock/bm1880-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/bitmain,bm1880-reset.h>
@@ -66,6 +67,12 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
+ osc: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -94,6 +101,15 @@
reg = <0x400 0x120>;
};
+ clk: clock-controller@e8 {
+ compatible = "bitmain,bm1880-clk";
+ reg = <0xe8 0x0c>, <0x800 0xb0>;
+ reg-names = "pll", "sys";
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ };
+
rst: reset-controller@c00 {
compatible = "bitmain,bm1880-reset";
reg = <0xc00 0x8>;
@@ -158,6 +174,9 @@
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x58018000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -168,6 +187,9 @@
uart1: serial@5801A000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -178,6 +200,9 @@
uart2: serial@5801C000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -188,6 +213,9 @@
uart3: serial@5801E000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6f90b0e62cba..250fc01de78d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG Exynos5433 TM2 board device tree source
+ * Samsung Exynos5433 TM2 board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index dda5d2746a74..fdd0796b29d4 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG Exynos5433 TM2 board device tree source
+ * Samsung Exynos5433 TM2 board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 1e207ce8b97b..089fc7a1af67 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG Exynos5433 TM2E board device tree source
+ * Samsung Exynos5433 TM2E board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 080e0f56e108..7af288fa9475 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG Exynos7 Espresso board device tree source
+ * Samsung Exynos7 Espresso board device tree source
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -13,7 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+ model = "Samsung Exynos7 Espresso board based on Exynos7";
compatible = "samsung,exynos7-espresso", "samsung,exynos7";
aliases {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 3a00ef0a17ff..5558045637ac 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG EXYNOS7 SoC device tree source
+ * Samsung Exynos7 SoC device tree source
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 38e344a2f0ff..bac293e6ee33 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
@@ -28,7 +30,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 5b9d4b35dd35..ca409d907b36 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -123,6 +123,21 @@
status = "okay";
};
+&fspi {
+ status = "okay";
+
+ mt35xu02g0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+ reg = <0>;
+ };
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 9720a190049f..afb55653850d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -93,9 +93,26 @@
&esdhc1 {
mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
status = "okay";
};
+&fspi {
+ status = "okay";
+
+ mt35xu02g0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+ reg = <0>;
+ };
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index a6f9b7784e8f..0bf375ec959b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -277,6 +277,19 @@
status = "disabled";
};
+ fspi: spi@20c0000 {
+ compatible = "nxp,lx2160a-fspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "fspi_en", "fspi";
+ status = "disabled";
+ };
+
esdhc: mmc@2140000 {
compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
@@ -322,7 +335,7 @@
edma0: dma-controller@22c0000 {
#dma-cells = <2>;
- compatible = "fsl,vf610-edma";
+ compatible = "fsl,ls1028a-edma";
reg = <0x0 0x22c0000 0x0 0x10000>,
<0x0 0x22d0000 0x0 0x10000>,
<0x0 0x22e0000 0x0 0x10000>;
@@ -534,6 +547,7 @@
dma-names = "tx", "rx";
dmas = <&edma0 1 4>,
<&edma0 1 3>;
+ fsl,sai-asynchronous;
status = "disabled";
};
@@ -548,6 +562,22 @@
dma-names = "tx", "rx";
dmas = <&edma0 1 6>,
<&edma0 1 5>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai3: audio-controller@f120000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf120000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 8>,
+ <&edma0 1 7>;
+ fsl,sai-asynchronous;
status = "disabled";
};
@@ -562,6 +592,37 @@
dma-names = "tx", "rx";
dmas = <&edma0 1 10>,
<&edma0 1 9>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai5: audio-controller@f140000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf140000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 12>,
+ <&edma0 1 11>;
+ fsl,sai-asynchronous;
+ status = "disabled";
+ };
+
+ sai6: audio-controller@f150000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf150000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 14>,
+ <&edma0 1 13>;
+ fsl,sai-asynchronous;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index 3595be0f2527..db3d303093f6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -112,6 +112,20 @@
};
+&qspi {
+ status = "okay";
+
+ mt25qu512a0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <0>;
+ };
+};
+
#include "fsl-ls1046-post.dtsi"
&fman0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 0c742befb761..dbc23d6cd3b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -101,23 +101,23 @@
&qspi {
status = "okay";
- qflash0: flash@0 {
- compatible = "spansion,m25p80";
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <0>;
};
- qflash1: flash@1 {
- compatible = "spansion,m25p80";
+ s25fs512s1: flash@1 {
+ compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <1>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 120e62dad154..41d8b15f25a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -143,6 +143,30 @@
status = "okay";
};
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <0>;
+ };
+
+ s25fs512s1: flash@1 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <1>;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 90b198939251..4d77b345cebd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -86,6 +86,30 @@
status = "okay";
};
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <0>;
+ };
+
+ s25fs512s1: flash@1 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <1>;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c676d0771762..594566265e3d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -375,6 +375,19 @@
status = "disabled";
};
+ qspi: spi@20c0000 {
+ compatible = "fsl,ls2080a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ status = "disabled";
+ };
+
esdhc: esdhc@2140000 {
compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 6fd7f63085c9..d0d670227ae2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -108,7 +108,15 @@
};
&qspi {
- status = "disabled";
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
};
&sata0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 7a0be8eaa84a..f96d06da96be 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -618,16 +618,16 @@
};
qspi: spi@20c0000 {
- status = "disabled";
- compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
+ compatible = "fsl,ls2080a-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x20c0000 0x0 0x10000>,
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
- interrupts = <0 25 0x4>; /* Level high type */
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "qspi_en", "qspi";
+ status = "disabled";
};
pcie1: pcie@3400000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
new file mode 100644
index 000000000000..071e21678f77
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A-CEx7
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+ model = "SolidRun LX2160A COM Express Type 7 module";
+ compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
+
+ aliases {
+ crypto = &crypto;
+ };
+
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "RT7290";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+&dpmac17 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+ status = "okay";
+
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9547";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fan-temperature-ctrlr@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ cooling-min-state = <0>;
+ cooling-max-state = <9>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ temperature-sensor@48 {
+ compatible = "nxp,sa56004";
+ reg = <0x48>;
+ vcc-supply = <&sb_3v3>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ // IRQ10_B
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&fspi {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,m25p80";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+ spi-rx-bus-width = <8>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
new file mode 100644
index 000000000000..86a9b771428d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog CX board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+ model = "SolidRun LX2160A Clearfog CX";
+ compatible = "solidrun,clearfog-cx",
+ "solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
new file mode 100644
index 000000000000..f3741a32e868
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog ITX board; this contains the
+// common parts shared between the Clearfog CX and Honeycomb builds.
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-cex7.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&emdio2 {
+ status = "okay";
+};
+
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
new file mode 100644
index 000000000000..fe19f3009ea5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Honeycomb board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+ model = "SolidRun LX2160A Honeycomb";
+ compatible = "solidrun,honeycomb",
+ "solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index c2817b784232..51615de102fe 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -35,6 +35,34 @@
status = "okay";
};
+&dpmac17 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+ status = "okay";
+
+ rgmii_phy1: ethernet-phy@1 {
+ /* AR8035 PHY */
+ compatible = "ethernet-phy-id004d.d072";
+ reg = <0x1>;
+ eee-broken-1000t;
+ };
+
+ rgmii_phy2: ethernet-phy@2 {
+ /* AR8035 PHY */
+ compatible = "ethernet-phy-id004d.d072";
+ reg = <0x2>;
+ eee-broken-1000t;
+ };
+};
+
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e883fe0fc1b7..e5ee5591e52b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -939,6 +939,27 @@
fsl,extts-fifo;
};
+ /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+ emdio1: mdio@8b96000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8b96000 0x0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ little-endian;
+ status = "disabled";
+ };
+
+ emdio2: mdio@8b97000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8b97000 0x0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 28ab17a277bb..9e54747cf4e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -16,6 +16,11 @@
stdout-path = &uart2;
};
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -77,6 +82,26 @@
cpu-supply = <&buck2_reg>;
};
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index cffa8991880d..5ccc4cc91959 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -430,18 +430,26 @@
#define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP 0x1AC 0x414 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1B0 0x418 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX 0x1B0 0x418 0x4F4 0x4 0x2
#define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0 0x1B0 0x418 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX 0x1B4 0x41C 0x000 0x4 0x0
#define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B 0x1B8 0x420 0x000 0x4 0x0
#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x1BC 0x424 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B 0x1BC 0x424 0x4F0 0x4 0x3
#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0
@@ -464,21 +472,29 @@
#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1D0 0x438 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x1D0 0x438 0x4F8 0x4 0x2
#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x1D4 0x43C 0x000 0x4 0x0
#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4Fc 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4Fc 0x4 0x3
#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 3d95b66a2d71..1e5e11592f7b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -140,11 +140,6 @@
};
};
- memory@40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0x80000000>;
- };
-
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -232,7 +227,7 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
@@ -438,7 +433,7 @@
};
anatop: anatop@30360000 {
- compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+ compatible = "fsl,imx8mm-anatop", "syscon";
reg = <0x30360000 0x10000>;
};
@@ -501,7 +496,7 @@
};
aips2: bus@30400000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -560,7 +555,7 @@
};
aips3: bus@30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>;
@@ -641,6 +636,36 @@
status = "disabled";
};
+ crypto: crypto@30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_AHB>,
+ <&clk IMX8MM_CLK_IPG_ROOT>;
+ clock-names = "aclk", "ipg";
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
@@ -775,7 +800,7 @@
};
aips4: bus@32c00000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -858,6 +883,16 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+ <&clk IMX8MM_DRAM_PLL>,
+ <&clk IMX8MM_CLK_DRAM_ALT>,
+ <&clk IMX8MM_CLK_DRAM_APB>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 071949412caf..2497eebb5739 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -17,6 +17,26 @@
cpu-supply = <&buck2_reg>;
};
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-600M {
+ opp-hz = /bits/ 64 <600000000>;
+ };
+ };
+};
+
&i2c1 {
pmic@4b {
compatible = "rohm,bd71847";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 2a74330aee8c..0d2ec4a2c7f2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -3,6 +3,7 @@
* Copyright 2019 NXP
*/
+#include <dt-bindings/usb/pd.h>
#include "imx8mn.dtsi"
/ {
@@ -22,6 +23,11 @@
};
};
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -60,6 +66,42 @@
status = "okay";
};
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec1>;
+ reg = <0x50>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+
+ port {
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -70,6 +112,21 @@
status = "okay";
};
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
&usdhc2 {
assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
assigned-clock-rates = <200000000>;
@@ -138,12 +195,25 @@
>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
fsl,pins = <
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
+ pinctrl_typec1: typec1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index e91625063f8e..a44b5438e842 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -139,11 +139,6 @@
};
};
- memory@40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0x80000000>;
- };
-
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -208,7 +203,7 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -349,7 +344,7 @@
anatop: anatop@30360000 {
compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
- "syscon", "simple-bus";
+ "syscon";
reg = <0x30360000 0x10000>;
};
@@ -395,7 +390,7 @@
};
aips2: bus@30400000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -455,7 +450,7 @@
};
aips3: bus@30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -537,6 +532,36 @@
status = "disabled";
};
+ crypto: crypto@30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_AHB>,
+ <&clk IMX8MN_CLK_IPG_ROOT>;
+ clock-names = "aclk", "ipg";
+
+ sec_jr0: jr0@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr1@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr2@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
@@ -671,7 +696,7 @@
};
aips4: bus@32c00000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -683,10 +708,8 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
clock-names = "usb1_ctrl_root_clk";
- assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
- <&clk IMX8MN_CLK_USB_CORE_REF>;
- assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
- <&clk IMX8MN_SYS_PLL1_100M>;
+ assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
status = "disabled";
@@ -759,6 +782,16 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+ <&clk IMX8MN_DRAM_PLL>,
+ <&clk IMX8MN_CLK_DRAM_ALT>,
+ <&clk IMX8MN_CLK_DRAM_APB>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index c36685916683..94066d49d6ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -105,6 +105,33 @@
cpu-supply = <&buck2_reg>;
};
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ /*
+ * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+ */
+ opp-166M {
+ opp-hz = /bits/ 64 <166935483>;
+ };
+
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
index b8cb20c01a79..bfd91c1ed6a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -84,6 +84,12 @@
clock-frequency = <100000>;
status = "okay";
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ status = "okay";
+ };
+
rtc@69 {
compatible = "abracon,ab1805";
reg = <0x69>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 596bc65f475c..764a4cb4e125 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -440,6 +440,13 @@
AVDD28-supply = <&reg_2v8_p>;
VDDIO-supply = <&reg_1v8_p>;
};
+
+ accel-gyro@6a {
+ compatible = "st,lsm9ds1-imu";
+ reg = <0x6a>;
+ vdd-supply = <&reg_3v3_p>;
+ vddio-supply = <&reg_3v3_p>;
+ };
};
&iomuxc {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
new file mode 100644
index 000000000000..3f2a489a4ad8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+ model = "Google i.MX8MQ Phanbell";
+ compatible = "google,imx8mq-phanbell", "fsl,imx8mq";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000 0 0x40000000>;
+ };
+
+ pmic_osc: clock-pmic {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic_osc";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pmic@4b {
+ compatible = "rohm,bd71837";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ #clock-cells = <0>;
+ clocks = <&pmic_osc>;
+ clock-output-names = "pmic_clk";
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 GPIO_ACTIVE_LOW>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <900000>;
+ rohm,dvs-idle-voltage = <900000>;
+ rohm,dvs-suspend-voltage = <800000>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ rohm,dvs-run-voltage = <900000>;
+ };
+
+ buck4: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ rohm,dvs-run-voltage = <900000>;
+ };
+
+ buck5: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck7: BUCK7 {
+ regulator-name = "buck7";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck8: BUCK8 {
+ regulator-name = "buck8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo6: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo7: LDO7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_pmic: pmicirq {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
+ MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
index 3dc44114da0e..602c870a7ccb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -125,6 +125,12 @@
};
};
};
+
+ eeprom@50 {
+ compatible = "atmel,24c01";
+ reg = <0x50>;
+ status = "okay";
+ };
};
&pgc_gpu{
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
new file mode 100644
index 000000000000..b4795a032fa2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+ model = "Einfochips i.MX8MQ Thor96";
+ compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000 0 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ user-led1 {
+ label = "green:user1";
+ gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user-led2 {
+ label = "green:user2";
+ gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+
+ user-led3 {
+ label = "green:user3";
+ gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ user-led4 {
+ label = "green:user4";
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ linux,default-trigger = "none";
+ };
+
+ wlan-active-led {
+ label = "yellow:wlan";
+ gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt-active-led {
+ label = "blue:bt";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
+
+ reg_usdhc1_vmmc: reg-usdhc1-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usdhc1_vqmmc: reg-usdhc1-vqmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8_EXT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_usdhc2_vmmc: reg-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vqmmc: reg-usdhc2-vqmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "NVCC_SD2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reg_on>;
+ gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* LS-SPI0 */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ phy-handle = <&ethphy>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+ };
+};
+
+/* LS-I2C0 */
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x8>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3ab {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+/* LS-I2C1 */
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+/* HS-I2C2 */
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+/* HS-I2C3 */
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&pgc_gpu {
+ power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+ power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <100000000>;
+ reg = <0>;
+ };
+};
+
+/* Debug UART */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+ status = "okay";
+};
+
+/* LS-UART0 */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_gpios>;
+ };
+};
+
+/* LS-UART1 */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* SDIO */
+&usdhc1 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <&reg_usdhc1_vmmc>;
+ vqmmc-supply = <&reg_usdhc1_vqmmc>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ no-sd;
+ no-emmc;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* uSD */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ vqmmc-supply = <&reg_usdhc2_vqmmc>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ no-sdio;
+ no-emmc;
+ disable-wp;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_bt_gpios: btgpiosgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
+ MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19
+ MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x16
+ MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x16
+ MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x16
+ MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x16
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x4
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x24
+ MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1c
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1c
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1c
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1c
+ MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1c
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1c
+ MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x19
+ MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19
+ MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
+ MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19
+ MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
+ MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
+
+ >;
+ };
+
+ pinctrl_reg_usdhc2: regusdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
+ MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49
+ MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
+ MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
+ MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
+ MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8c
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcc
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcc
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcc
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcc
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcc
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9c
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdc
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdc
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdc
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdc
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdc
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xcc
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+
+ pinctrl_wifi_reg_on: wifiregongrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x17059
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
index d2a6da479980..6b3581366d67 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -8,7 +8,7 @@
#include "imx8mq-zii-ultra.dtsi"
/ {
- model = "ZII i.MX8MQ Ultra RMB3 Board";
+ model = "ZII Ultra RMB3 Board";
compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
index 1084d9330403..173b9e9b2bbd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
@@ -8,7 +8,7 @@
#include "imx8mq-zii-ultra.dtsi"
/ {
- model = "ZII i.MX8MQ Ultra Zest Board";
+ model = "ZII Ultra Zest Board";
compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7f9319452b58..6a1e83922c71 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -290,11 +290,67 @@
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
bus@30000000 { /* AIPS1 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
+ sai1: sai@30010000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai";
+ reg = <0x30010000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
+ <&clk IMX8MQ_CLK_SAI1_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai6: sai@30030000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai";
+ reg = <0x30030000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+ <&clk IMX8MQ_CLK_SAI6_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai5: sai@30040000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai";
+ reg = <0x30040000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
+ <&clk IMX8MQ_CLK_SAI5_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai4: sai@30050000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai";
+ reg = <0x30050000 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
+ <&clk IMX8MQ_CLK_SAI4_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
gpio1: gpio@30200000 {
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>;
@@ -448,6 +504,23 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
+ lcdif: lcd-controller@30320000 {
+ compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif";
+ reg = <0x30320000 0x10000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+ clock-names = "pix";
+ assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+ <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+ <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+ <&clk IMX8MQ_VIDEO_PLL1>;
+ assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+ <&clk IMX8MQ_VIDEO_PLL1>,
+ <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+ assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+ status = "disabled";
+ };
+
iomuxc: iomuxc@30330000 {
compatible = "fsl,imx8mq-iomuxc";
reg = <0x30330000 0x10000>;
@@ -519,6 +592,8 @@
clock-names = "ckil", "osc_25m", "osc_27m",
"clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
+ assigned-clocks = <&clk IMX8MQ_CLK_NOC>;
+ assigned-clock-rates = <800000000>;
};
src: reset-controller@30390000 {
@@ -617,7 +692,7 @@
};
bus@30400000 { /* AIPS2 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -676,7 +751,7 @@
};
bus@30800000 { /* AIPS3 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>,
@@ -765,6 +840,20 @@
status = "disabled";
};
+ sai3: sai@308c0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai";
+ reg = <0x308c0000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+ <&clk IMX8MQ_CLK_SAI3_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
crypto: crypto@30900000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
@@ -934,7 +1023,7 @@
};
bus@32c00000 { /* AIPS4 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -1113,6 +1202,16 @@
interrupt-parent = <&gic>;
};
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+ <&clk IMX8MQ_DRAM_PLL_OUT>,
+ <&clk IMX8MQ_CLK_DRAM_ALT>,
+ <&clk IMX8MQ_CLK_DRAM_APB>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9646a41e0532..fb5f752b15fe 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -250,7 +250,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a060000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -262,7 +261,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a070000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -274,7 +272,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a080000 0x1000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -286,7 +283,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a090000 0x1000>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -298,7 +294,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a800000 0x4000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
@@ -311,7 +306,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a810000 0x4000>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
@@ -324,7 +318,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a820000 0x4000>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
@@ -337,7 +330,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a830000 0x4000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
@@ -361,7 +353,6 @@
usdhc1: mmc@5b010000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b010000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
@@ -374,7 +365,6 @@
usdhc2: mmc@5b020000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b020000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
@@ -389,7 +379,6 @@
usdhc3: mmc@5b030000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b030000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
@@ -446,7 +435,6 @@
ddr-pmu@5c020000 {
compatible = "fsl,imx8-ddr-pmu";
reg = <0x5c020000 0x10000>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index c563d3eb2d98..7d370dac4c85 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -170,6 +170,7 @@
};
&ir {
+ linux,rc-map-name = "rc-hisi-poplar";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 13821a0ff524..12bc1d3ed424 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -564,7 +564,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- bus-range = <0 15>;
+ bus-range = <0x00 0xff>;
num-lanes = <1>;
ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 1253af30da8e..40cb16e8c814 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb
+dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
+ socfpga_agilex_socdk_nand.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index d43e1299c8ef..e1d357eaad7c 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -113,6 +113,7 @@
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 1>;
+ altr,sysmgr-syscon = <&sysmgr 0x44 0>;
status = "disabled";
};
@@ -128,6 +129,7 @@
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 2>;
+ altr,sysmgr-syscon = <&sysmgr 0x48 8>;
status = "disabled";
};
@@ -143,6 +145,7 @@
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 3>;
+ altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
status = "disabled";
};
@@ -249,6 +252,18 @@
status = "disabled";
};
+ nand: nand@ffb90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-denali-nand";
+ reg = <0xffb90000 0x10000>,
+ <0xffb80000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ interrupts = <0 97 4>;
+ resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+ status = "disabled";
+ };
+
ocram: sram@ffe00000 {
compatible = "mmio-sram";
reg = <0xffe00000 0x40000>;
@@ -325,7 +340,7 @@
};
sysmgr: sysmgr@ffd12000 {
- compatible = "altr,sys-mgr", "syscon";
+ compatible = "altr,sys-mgr-s10","altr,sys-mgr";
reg = <0xffd12000 0x500>;
};
@@ -449,6 +464,65 @@
reg = <0xf8011100 0xc0>;
};
+ eccmgr {
+ compatible = "altr,socfpga-s10-ecc-manager",
+ "altr,socfpga-a10-ecc-manager";
+ altr,sysmgr-syscon = <&sysmgr>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <0 15 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ sdramedac {
+ compatible = "altr,sdram-edac-s10";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <16 4>;
+ };
+
+ ocram-ecc@ff8cc000 {
+ compatible = "altr,socfpga-s10-ocram-ecc",
+ "altr,socfpga-a10-ocram-ecc";
+ reg = <0xff8cc000 0x100>;
+ altr,ecc-parent = <&ocram>;
+ interrupts = <1 4>;
+ };
+
+ usb0-ecc@ff8c4000 {
+ compatible = "altr,socfpga-s10-usb-ecc",
+ "altr,socfpga-usb-ecc";
+ reg = <0xff8c4000 0x100>;
+ altr,ecc-parent = <&usb0>;
+ interrupts = <2 4>;
+ };
+
+ emac0-rx-ecc@ff8c0000 {
+ compatible = "altr,socfpga-s10-eth-mac-ecc",
+ "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0000 0x100>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 4>;
+ };
+
+ emac0-tx-ecc@ff8c0400 {
+ compatible = "altr,socfpga-s10-eth-mac-ecc",
+ "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0400 0x100>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 4>;
+ };
+
+ sdmmca-ecc@ff8c8c00 {
+ compatible = "altr,socfpga-s10-sdmmc-ecc",
+ "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c8c00 0x100>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <14 4>,
+ <15 4>;
+ };
+ };
+
qspi: spi@ff8d2000 {
compatible = "cdns,qspi-nor";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
new file mode 100644
index 000000000000..979aa59a6bd0
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+ model = "SoCFPGA Agilex SoCDK";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ hps1 {
+ label = "hps_led1";
+ gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ hps2 {
+ label = "hps_led2";
+ gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ soc {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ nand-bus-width = <16>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0x200000>;
+ };
+ partition@200000 {
+ label = "env";
+ reg = <0x200000 0x40000>;
+ };
+ partition@240000 {
+ label = "dtb";
+ reg = <0x240000 0x40000>;
+ };
+ partition@280000 {
+ label = "kernel";
+ reg = <0x280000 0x2000000>;
+ };
+ partition@2280000 {
+ label = "misc";
+ reg = <0x2280000 0x2000000>;
+ };
+ partition@4280000 {
+ label = "rootfs";
+ reg = <0x4280000 0x3bd80000>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index bd4aab6092e0..7eb6c1796cef 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -69,6 +69,7 @@
mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
};
sfp_eth1: sfp-eth1 {
@@ -78,6 +79,7 @@
mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
};
};
@@ -119,12 +121,14 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
lm75@48 {
status = "okay";
@@ -143,6 +147,7 @@
phy-mode = "sgmii";
status = "okay";
managed = "in-band-status";
+ phys = <&comphy1 0>;
sfp = <&sfp_eth0>;
};
@@ -150,11 +155,14 @@
phy-mode = "sgmii";
status = "okay";
managed = "in-band-status";
+ phys = <&comphy0 1>;
sfp = <&sfp_eth1>;
};
&usb3 {
status = "okay";
+ phys = <&usb2_utmi_otg_phy>;
+ phy-names = "usb2-utmi-otg-phy";
};
&uart0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index bd881497b872..a211a046b2f2 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -408,6 +408,8 @@
reg = <5>;
label = "cpu";
ethernet = <&cp1_eth2>;
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 15f1842f6df3..8b4e806d5119 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -157,6 +157,7 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
#cooling-cells = <2>;
+ dynamic-power-coefficient = <263>;
clocks = <&infracfg CLK_INFRA_CA53SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
@@ -170,6 +171,7 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
#cooling-cells = <2>;
+ dynamic-power-coefficient = <263>;
clocks = <&infracfg CLK_INFRA_CA53SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
@@ -183,6 +185,7 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
#cooling-cells = <2>;
+ dynamic-power-coefficient = <530>;
clocks = <&infracfg CLK_INFRA_CA72SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
@@ -196,6 +199,7 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
#cooling-cells = <2>;
+ dynamic-power-coefficient = <530>;
clocks = <&infracfg CLK_INFRA_CA72SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
@@ -1401,6 +1405,20 @@
<&topckgen CLK_TOP_UNIVPLL1_D2>;
};
+ jpegdec: jpegdec@18004000 {
+ compatible = "mediatek,mt8173-jpgdec";
+ reg = <0 0x18004000 0 0x1000>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&vencsys CLK_VENC_CKE0>,
+ <&vencsys CLK_VENC_CKE3>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+ mediatek,larb = <&larb3>;
+ iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
+ <&iommu M4U_PORT_JPGDEC_BSDMA>;
+ };
+
vencltsys: clock-controller@19000000 {
compatible = "mediatek,mt8173-vencltsys", "syscon";
reg = <0 0x19000000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 10b32471bc7b..124f9d3e09f5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mt8183-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset-controller/mt8183-resets.h>
#include "mt8183-pinfunc.h"
/ {
@@ -227,6 +228,7 @@
compatible = "mediatek,mt8183-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
pio: pinctrl@10005000 {
@@ -278,6 +280,15 @@
clock-names = "clk13m";
};
+ gce: mailbox@10238000 {
+ compatible = "mediatek,mt8183-gce";
+ reg = <0 0x10238000 0 0x4000>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+ #mbox-cells = <3>;
+ clocks = <&infracfg CLK_INFRA_GCE>;
+ clock-names = "gce";
+ };
+
auxadc: auxadc@11001000 {
compatible = "mediatek,mt8183-auxadc",
"mediatek,mt8173-auxadc";
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 631a7f77c386..6238e6e274b4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -604,9 +604,11 @@
#iommu-cells = <1>;
};
- emc: emc@7001b000 {
+ emc: external-memory-controller@7001b000 {
compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
reg = <0x0 0x7001b000 0x0 0x1000>;
+ clocks = <&tegra_car TEGRA124_CLK_EMC>;
+ clock-names = "emc";
nvidia,memory-controller = <&mc>;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 5e18acf5cfad..947744d0f04c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -8,6 +8,7 @@
compatible = "nvidia,p3310", "nvidia,tegra186";
aliases {
+ ethernet0 = "/ethernet@2490000";
sdhci0 = "/sdhci@3460000";
sdhci1 = "/sdhci@3400000";
serial0 = &uarta;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 7893d78a0fb6..c905527c26ef 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -142,7 +142,29 @@
memory-controller@2c00000 {
compatible = "nvidia,tegra186-mc";
reg = <0x0 0x02c00000 0x0 0xb0000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
+
+ /*
+ * Memory clients have access to all 40 bits that the memory
+ * controller can address.
+ */
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+ emc: external-memory-controller@2c60000 {
+ compatible = "nvidia,tegra186-emc";
+ reg = <0x0 0x02c60000 0x0 0x50000>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_EMC>;
+ clock-names = "emc";
+
+ nvidia,bpmp = <&bpmp>;
+ };
};
uarta: serial@3100000 {
@@ -524,12 +546,9 @@
reg = <0x0 0x03530000 0x0 0x8000>,
<0x0 0x03538000 0x0 0x1000>;
reg-names = "hcd", "fpci";
-
- iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-
clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
<&bpmp TEGRA186_CLK_XUSB_FALCON>,
<&bpmp TEGRA186_CLK_XUSB_SS>,
@@ -542,16 +561,15 @@
clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
"xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
"pll_u_480m", "clk_m", "pll_e";
-
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
power-domain-names = "xusb_host", "xusb_ss";
- nvidia,xusb-padctl = <&padctl>;
-
- status = "disabled";
-
+ iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
+
+ nvidia,xusb-padctl = <&padctl>;
};
fuse@3820000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index c7f2a20e6b02..bdd33ff4e324 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -48,6 +48,10 @@
};
};
+ memory-controller@2c00000 {
+ status = "okay";
+ };
+
serial@3110000 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 353a6a22196d..985e7d84f161 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -152,7 +152,7 @@
gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
- linux,code = <BTN_1>;
+ linux,code = <KEY_SLEEP>;
debounce-interval = <10>;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 11220d97adb8..ccac43be12ac 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/power/tegra194-powergate.h>
#include <dt-bindings/reset/tegra194-reset.h>
#include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
+#include <dt-bindings/memory/tegra194-mc.h>
/ {
compatible = "nvidia,tegra194";
@@ -21,6 +22,12 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x40000000>;
+ misc@100000 {
+ compatible = "nvidia,tegra194-misc";
+ reg = <0x00100000 0xf000>,
+ <0x0010f000 0x1000>;
+ };
+
gpio: gpio@2200000 {
compatible = "nvidia,tegra194-gpio";
reg-names = "security", "gpio";
@@ -164,6 +171,48 @@
};
};
+ mc: memory-controller@2c00000 {
+ compatible = "nvidia,tegra194-mc";
+ reg = <0x02c00000 0x100000>,
+ <0x02b80000 0x040000>,
+ <0x01700000 0x100000>;
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>,
+ <0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+ <0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+ /*
+ * Bit 39 of addresses passing through the memory
+ * controller selects the XBAR format used when memory
+ * is accessed. This is used to transparently access
+ * memory in the XBAR format used by the discrete GPU
+ * (bit 39 set) or Tegra (bit 39 clear).
+ *
+ * As a consequence, the operating system must ensure
+ * that bit 39 is never used implicitly, for example
+ * via an I/O virtual address mapping of an IOMMU. If
+ * devices require access to the XBAR switch, their
+ * drivers must set this bit explicitly.
+ *
+ * Limit the DMA range for memory clients to [38:0].
+ */
+ dma-ranges = <0x0 0x0 0x0 0x80 0x0>;
+
+ emc: external-memory-controller@2c60000 {
+ compatible = "nvidia,tegra194-emc";
+ reg = <0x0 0x02c60000 0x0 0x90000>,
+ <0x0 0x01780000 0x0 0x80000>;
+ clocks = <&bpmp TEGRA194_CLK_EMC>;
+ clock-names = "emc";
+
+ nvidia,bpmp = <&bpmp>;
+ };
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
reg = <0x03100000 0x40>;
@@ -488,6 +537,13 @@
status = "disabled";
};
+ fuse@3820000 {
+ compatible = "nvidia,tegra194-efuse";
+ reg = <0x03820000 0x10000>;
+ clocks = <&bpmp TEGRA194_CLK_FUSE>;
+ clock-names = "fuse";
+ };
+
gic: interrupt-controller@3881000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 90381d52ac54..9101d3a39cd2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -536,6 +536,19 @@
vmmc-supply = <&vdd_3v3_sd>;
};
+ sdhci@700b0400 {
+ status = "okay";
+ bus-width = <4>;
+
+ vqmmc-supply = <&vdd_1v8>;
+ vmmc-supply = <&vdd_3v3_sys>;
+
+ non-removable;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ wakeup-source;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -573,6 +586,66 @@
};
};
+ fan: fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 3 45334>;
+
+ cooling-levels = <0 64 128 255>;
+ #cooling-cells = <2>;
+ };
+
+ thermal-zones {
+ cpu {
+ trips {
+ cpu_trip_critical: critical {
+ temperature = <96500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+
+ cpu_trip_hot: hot {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_trip_active: active {
+ temperature = <50000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_trip_passive: passive {
+ temperature = <30000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ cpu-critical {
+ cooling-device = <&fan 3 3>;
+ trip = <&cpu_trip_critical>;
+ };
+
+ cpu-hot {
+ cooling-device = <&fan 2 2>;
+ trip = <&cpu_trip_hot>;
+ };
+
+ cpu-active {
+ cooling-device = <&fan 1 1>;
+ trip = <&cpu_trip_active>;
+ };
+
+ cpu-passive {
+ cooling-device = <&fan 0 0>;
+ trip = <&cpu_trip_passive>;
+ };
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6498a1ec893f..973c0f079659 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
@@ -13,6 +14,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index ec2f0de67993..aff218c1b7b6 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -8,6 +8,15 @@
pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
+ input-disable;
+ output-high;
+ };
+ };
+
+ usb_hub_reset_pm_device: usb_hub_reset_pm_device {
+ pinconf {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
@@ -22,6 +31,16 @@
};
};
+ usb_sw_sel_pm_device: usb_sw_sel_pm_device {
+ pinconf {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <PM8916_GPIO_VPH>;
+ input-disable;
+ output-low;
+ };
+ };
+
pm8916_gpios_leds: pm8916_gpios_leds {
pinconf {
pins = "gpio1", "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index e12a36ce5d93..037e26b3f8d5 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -358,14 +358,15 @@
};
usb@78d9000 {
- extcon = <&usb_id>;
+ extcon = <&usb_id>, <&usb_id>;
status = "okay";
adp-disable;
hnp-disable;
srp-disable;
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&usb_sw_sel_pm>;
+ dr_mode = "otg";
+ pinctrl-names = "default", "device";
+ pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+ pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
ulpi {
phy {
v1p8-supply = <&pm8916_l7>;
@@ -504,7 +505,7 @@
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
- vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+ id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
deleted file mode 100644
index a5cc80d6e82f..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-&msmgpio {
- sdc2_cd_on: sdc2_cd_on {
- mux {
- pins = "gpio38";
- function = "gpio";
- };
-
- config {
- pins = "gpio38";
- bias-pull-up; /* pull up */
- drive-strength = <16>; /* 16 MA */
- };
- };
-
- sdc2_cd_off: sdc2_cd_off {
- mux {
- pins = "gpio38";
- function = "gpio";
- };
-
- config {
- pins = "gpio38";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- blsp1_uart1_default: blsp1_uart1_default {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "blsp_uart2";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart1_sleep: blsp1_uart1_sleep {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "gpio";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- hdmi_hpd_active: hdmi_hpd_active {
- mux {
- pins = "gpio34";
- function = "hdmi_hot";
- };
-
- config {
- pins = "gpio34";
- bias-pull-down;
- drive-strength = <16>;
- };
- };
-
- hdmi_hpd_suspend: hdmi_hpd_suspend {
- mux {
- pins = "gpio34";
- function = "hdmi_hot";
- };
-
- config {
- pins = "gpio34";
- bias-pull-down;
- drive-strength = <2>;
- };
- };
-
- hdmi_ddc_active: hdmi_ddc_active {
- mux {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- };
-
- config {
- pins = "gpio32", "gpio33";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- hdmi_ddc_suspend: hdmi_ddc_suspend {
- mux {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- };
-
- config {
- pins = "gpio32", "gpio33";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
deleted file mode 100644
index 31a3e3311ad5..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-&pm8994_gpios {
-
- pinctrl-names = "default";
- pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
- ls_exp_gpio_f: pm8994_gpio5 {
- pinconf {
- pins = "gpio5";
- output-low;
- power-source = <2>; // PM8994_GPIO_S4, 1.8V
- };
- };
-
- bt_en_gpios: bt_en_gpios {
- pinconf {
- pins = "gpio19";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- wlan_en_gpios: wlan_en_gpios {
- pinconf {
- pins = "gpio8";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- audio_mclk: clk_div1 {
- pinconf {
- pins = "gpio15";
- function = "func1";
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-
- volume_up_gpio: pm8996_gpio2 {
- pinconf {
- pins = "gpio2";
- function = "normal";
- input-enable;
- drive-push-pull;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-
- divclk4_pin_a: divclk4 {
- pinconf {
- pins = "gpio18";
- function = PMIC_GPIO_FUNC_FUNC2;
-
- bias-disable;
- power-source = <PM8994_GPIO_S4>;
- };
- };
-
- usb3_vbus_det_gpio: pm8996_gpio22 {
- pinconf {
- pins = "gpio22";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-};
-
-&pmi8994_gpios {
- usb2_vbus_det_gpio: pmi8996_gpio6 {
- pinconf {
- pins = "gpio6";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index dba3488492f1..fff6115f2670 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -6,10 +6,9 @@
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
-#include "apq8096-db820c-pins.dtsi"
-#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
@@ -78,611 +77,837 @@
};
};
- soc {
- serial@7570000 {
- label = "BT-UART";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
-
- bluetooth {
- compatible = "qcom,qca6174-bt";
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
- /* bt_disable_n gpio */
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&volume_up_gpio>;
- clocks = <&divclk4>;
- };
+ button@0 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
};
+ };
- serial@75b0000 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
- };
-
- serial@75b1000 {
- label = "LS-UART0";
- status = "disabled";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_4pins_default>;
- pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
- };
-
- i2c@7577000 {
- /* On Low speed expansion */
- label = "LS-I2C0";
- status = "okay";
- };
-
- i2c@75b6000 {
- /* On Low speed expansion */
- label = "LS-I2C1";
- status = "okay";
- };
-
- spi@7575000 {
- /* On Low speed expansion */
- label = "LS-SPI0";
- status = "okay";
- };
-
- i2c@75b5000 {
- /* On High speed expansion */
- label = "HS-I2C2";
- status = "okay";
- };
-
- spi@75ba000{
- /* On High speed expansion */
- label = "HS-SPI1";
- status = "okay";
- };
-
- sdhci@74a4900 {
- /* External SD card */
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
- cd-gpios = <&msmgpio 38 0x1>;
- vmmc-supply = <&pm8994_l21>;
- vqmmc-supply = <&pm8994_l13>;
- status = "okay";
- };
-
- phy@627000 {
- status = "okay";
- };
-
- ufshc@624000 {
- status = "okay";
- };
-
- pinctrl@1010000 {
- gpio-line-names =
- "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
- "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
- "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
- "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
- "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
- "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
- "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
- "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
- "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
- "TP93", /* GPIO_9 */
- "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
- "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
- "NC", /* GPIO_12 */
- "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
- "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
- "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
- "TP99", /* GPIO_16 */
- "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
- "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
- "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
- "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
- "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
- "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
- "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
- "GPIO-D", /* GPIO_24, LSEC pin 26 */
- "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
- "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
- "BLSP6_I2C_SDA", /* GPIO_27 */
- "BLSP6_I2C_SCL", /* GPIO_28 */
- "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
- "GPIO30", /* GPIO_30, S HSEC pin 4 */
- "HDMI_CEC", /* GPIO_31 */
- "HDMI_DDC_CLOCK", /* GPIO_32 */
- "HDMI_DDC_DATA", /* GPIO_33 */
- "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
- "PCIE0_RST_N", /* GPIO_35 */
- "PCIE0_CLKREQ_N", /* GPIO_36 */
- "PCIE0_WAKE", /* GPIO_37 */
- "SD_CARD_DET_N", /* GPIO_38 */
- "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
- "W_DISABLE_N", /* GPIO_40 */
- "[BLSP9_UART_TX]", /* GPIO_41 */
- "[BLSP9_UART_RX]", /* GPIO_42 */
- "[BLSP2_UART_CTS_N]", /* GPIO_43 */
- "[BLSP2_UART_RFR_N]", /* GPIO_44 */
- "[BLSP3_UART_TX]", /* GPIO_45 */
- "[BLSP3_UART_RX]", /* GPIO_46 */
- "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
- "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
- "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
- "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
- "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
- "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
- "[CODEC_INT1_N]", /* GPIO_53 */
- "[CODEC_INT2_N]", /* GPIO_54 */
- "[BLSP7_I2C_SDA]", /* GPIO_55 */
- "[BLSP7_I2C_SCL]", /* GPIO_56 */
- "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
- "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
- "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
- "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
- "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
- "GPIO-E", /* GPIO_62, LSEC pin 27 */
- "TP87", /* GPIO_63 */
- "[CODEC_RST_N]", /* GPIO_64 */
- "[PCM1_CLK]", /* GPIO_65 */
- "[PCM1_SYNC]", /* GPIO_66 */
- "[PCM1_DIN]", /* GPIO_67 */
- "[PCM1_DOUT]", /* GPIO_68 */
- "AUDIO_REF_CLK", /* GPIO_69 */
- "SLIMBUS_CLK", /* GPIO_70 */
- "SLIMBUS_DATA0", /* GPIO_71 */
- "SLIMBUS_DATA1", /* GPIO_72 */
- "NC", /* GPIO_73 */
- "NC", /* GPIO_74 */
- "NC", /* GPIO_75 */
- "NC", /* GPIO_76 */
- "TP94", /* GPIO_77 */
- "NC", /* GPIO_78 */
- "TP95", /* GPIO_79 */
- "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
- "TP88", /* GPIO_81 */
- "TP89", /* GPIO_82 */
- "TP90", /* GPIO_83 */
- "TP91", /* GPIO_84 */
- "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
- "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
- "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
- "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
- "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
- "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
- "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
- "NC", /* GPIO_92 */
- "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
- "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
- "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
- "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
- "NC", /* GPIO_97 */
- "CAM1_STANDBY_N", /* GPIO_98 */
- "NC", /* GPIO_99 */
- "NC", /* GPIO_100 */
- "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
- "BOOT_CONFIG1", /* GPIO_102 */
- "USB_HUB_RESET", /* GPIO_103 */
- "CAM1_RST_N", /* GPIO_104 */
- "NC", /* GPIO_105 */
- "NC", /* GPIO_106 */
- "NC", /* GPIO_107 */
- "NC", /* GPIO_108 */
- "NC", /* GPIO_109 */
- "NC", /* GPIO_110 */
- "NC", /* GPIO_111 */
- "NC", /* GPIO_112 */
- "PMI8994_BUA", /* GPIO_113 */
- "PCIE2_RST_N", /* GPIO_114 */
- "PCIE2_CLKREQ_N", /* GPIO_115 */
- "PCIE2_WAKE", /* GPIO_116 */
- "SSC_IRQ_0", /* GPIO_117 */
- "SSC_IRQ_1", /* GPIO_118 */
- "SSC_IRQ_2", /* GPIO_119 */
- "NC", /* GPIO_120 */
- "GPIO121", /* GPIO_121, S HSEC pin 2 */
- "NC", /* GPIO_122 */
- "SSC_IRQ_6", /* GPIO_123 */
- "SSC_IRQ_7", /* GPIO_124 */
- "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
- "BOOT_CONFIG5", /* GPIO_126 */
- "NC", /* GPIO_127 */
- "NC", /* GPIO_128 */
- "BOOT_CONFIG7", /* GPIO_129 */
- "PCIE1_RST_N", /* GPIO_130 */
- "PCIE1_CLKREQ_N", /* GPIO_131 */
- "PCIE1_WAKE", /* GPIO_132 */
- "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
- "NC", /* GPIO_134 */
- "NC", /* GPIO_135 */
- "BOOT_CONFIG8", /* GPIO_136 */
- "NC", /* GPIO_137 */
- "NC", /* GPIO_138 */
- "GPS_SSBI2", /* GPIO_139 */
- "GPS_SSBI1", /* GPIO_140 */
- "NC", /* GPIO_141 */
- "NC", /* GPIO_142 */
- "NC", /* GPIO_143 */
- "BOOT_CONFIG6", /* GPIO_144 */
- "NC", /* GPIO_145 */
- "NC", /* GPIO_146 */
- "NC", /* GPIO_147 */
- "NC", /* GPIO_148 */
- "NC"; /* GPIO_149 */
- };
-
- qcom,spmi@400f000 {
- pmic@0 {
- gpios@c000 {
- gpio-line-names =
- "NC",
- "KEY_VOLP_N",
- "NC",
- "BL1_PWM",
- "GPIO-F", /* BL0_PWM, LSEC pin 28 */
- "BL1_EN",
- "NC",
- "WLAN_EN",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "DIVCLK1",
- "DIVCLK2",
- "DIVCLK3",
- "DIVCLK4",
- "BT_EN",
- "PMIC_SLB",
- "PMIC_BUA",
- "USB_VBUS_DET";
- };
-
- mpps@a000 {
- gpio-line-names =
- "VDDPX_BIAS",
- "WIFI_LED",
- "NC",
- "BT_LED",
- "PM_MPP05",
- "PM_MPP06",
- "PM_MPP07",
- "NC";
- };
- };
+ usb2_id: usb2-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_det_gpio>;
+ };
- pmic@2 {
- gpios@c000 {
- gpio-line-names =
- "NC",
- "SPKR_AMP_EN1",
- "SPKR_AMP_EN2",
- "TP61",
- "NC",
- "USB2_VBUS_DET",
- "NC",
- "NC",
- "NC",
- "NC";
- };
- };
- };
+ usb3_id: usb3-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_det_gpio>;
+ };
- phy@34000 {
- status = "okay";
- };
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ vreg_s8a_l3a_input: vreg-s8a-l3a-input {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s8a_l3a_input";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-min-microvolt = <0>;
+ regulator-max-microvolt = <0>;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_gpios>;
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8994_gpios 8 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&blsp1_i2c2 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
+
+&blsp1_spi0 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ label = "BT-UART";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
+
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
+
+ /* bt_disable_n gpio */
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&divclk4>;
+ };
+};
+
+&blsp2_i2c0 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ status = "okay";
+};
+
+&blsp2_i2c1 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
+
+&blsp2_spi5 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
+
+&blsp2_uart1 {
+ label = "LS-UART1";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart1_2pins_default>;
+ pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
+
+&blsp2_uart2 {
+ label = "LS-UART0";
+ status = "disabled";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_4pins_default>;
+ pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+};
+
+&camss {
+ vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&hdmi {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+ pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+ core-vdda-supply = <&vreg_l12a_1p8>;
+ core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&hdmi_phy {
+ status = "okay";
+
+ vddio-supply = <&vreg_l12a_1p8>;
+ vcca-supply = <&vreg_l28a_0p925>;
+ #phy-cells = <0>;
+};
+
+&hsusb_phy1 {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
- phy@7410000 {
- status = "okay";
+&msmgpio {
+ gpio-line-names =
+ "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+ "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+ "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+ "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+ "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+ "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+ "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+ "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+ "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+ "TP93", /* GPIO_9 */
+ "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+ "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+ "NC", /* GPIO_12 */
+ "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+ "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+ "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+ "TP99", /* GPIO_16 */
+ "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+ "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+ "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+ "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+ "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+ "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+ "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+ "GPIO-D", /* GPIO_24, LSEC pin 26 */
+ "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+ "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+ "BLSP6_I2C_SDA", /* GPIO_27 */
+ "BLSP6_I2C_SCL", /* GPIO_28 */
+ "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+ "GPIO30", /* GPIO_30, S HSEC pin 4 */
+ "HDMI_CEC", /* GPIO_31 */
+ "HDMI_DDC_CLOCK", /* GPIO_32 */
+ "HDMI_DDC_DATA", /* GPIO_33 */
+ "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+ "PCIE0_RST_N", /* GPIO_35 */
+ "PCIE0_CLKREQ_N", /* GPIO_36 */
+ "PCIE0_WAKE", /* GPIO_37 */
+ "SD_CARD_DET_N", /* GPIO_38 */
+ "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+ "W_DISABLE_N", /* GPIO_40 */
+ "[BLSP9_UART_TX]", /* GPIO_41 */
+ "[BLSP9_UART_RX]", /* GPIO_42 */
+ "[BLSP2_UART_CTS_N]", /* GPIO_43 */
+ "[BLSP2_UART_RFR_N]", /* GPIO_44 */
+ "[BLSP3_UART_TX]", /* GPIO_45 */
+ "[BLSP3_UART_RX]", /* GPIO_46 */
+ "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+ "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+ "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+ "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+ "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+ "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+ "[CODEC_INT1_N]", /* GPIO_53 */
+ "[CODEC_INT2_N]", /* GPIO_54 */
+ "[BLSP7_I2C_SDA]", /* GPIO_55 */
+ "[BLSP7_I2C_SCL]", /* GPIO_56 */
+ "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+ "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+ "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+ "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+ "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+ "GPIO-E", /* GPIO_62, LSEC pin 27 */
+ "TP87", /* GPIO_63 */
+ "[CODEC_RST_N]", /* GPIO_64 */
+ "[PCM1_CLK]", /* GPIO_65 */
+ "[PCM1_SYNC]", /* GPIO_66 */
+ "[PCM1_DIN]", /* GPIO_67 */
+ "[PCM1_DOUT]", /* GPIO_68 */
+ "AUDIO_REF_CLK", /* GPIO_69 */
+ "SLIMBUS_CLK", /* GPIO_70 */
+ "SLIMBUS_DATA0", /* GPIO_71 */
+ "SLIMBUS_DATA1", /* GPIO_72 */
+ "NC", /* GPIO_73 */
+ "NC", /* GPIO_74 */
+ "NC", /* GPIO_75 */
+ "NC", /* GPIO_76 */
+ "TP94", /* GPIO_77 */
+ "NC", /* GPIO_78 */
+ "TP95", /* GPIO_79 */
+ "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+ "TP88", /* GPIO_81 */
+ "TP89", /* GPIO_82 */
+ "TP90", /* GPIO_83 */
+ "TP91", /* GPIO_84 */
+ "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+ "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+ "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+ "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+ "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+ "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+ "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+ "NC", /* GPIO_92 */
+ "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+ "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+ "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+ "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+ "NC", /* GPIO_97 */
+ "CAM1_STANDBY_N", /* GPIO_98 */
+ "NC", /* GPIO_99 */
+ "NC", /* GPIO_100 */
+ "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+ "BOOT_CONFIG1", /* GPIO_102 */
+ "USB_HUB_RESET", /* GPIO_103 */
+ "CAM1_RST_N", /* GPIO_104 */
+ "NC", /* GPIO_105 */
+ "NC", /* GPIO_106 */
+ "NC", /* GPIO_107 */
+ "NC", /* GPIO_108 */
+ "NC", /* GPIO_109 */
+ "NC", /* GPIO_110 */
+ "NC", /* GPIO_111 */
+ "NC", /* GPIO_112 */
+ "PMI8994_BUA", /* GPIO_113 */
+ "PCIE2_RST_N", /* GPIO_114 */
+ "PCIE2_CLKREQ_N", /* GPIO_115 */
+ "PCIE2_WAKE", /* GPIO_116 */
+ "SSC_IRQ_0", /* GPIO_117 */
+ "SSC_IRQ_1", /* GPIO_118 */
+ "SSC_IRQ_2", /* GPIO_119 */
+ "NC", /* GPIO_120 */
+ "GPIO121", /* GPIO_121, S HSEC pin 2 */
+ "NC", /* GPIO_122 */
+ "SSC_IRQ_6", /* GPIO_123 */
+ "SSC_IRQ_7", /* GPIO_124 */
+ "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+ "BOOT_CONFIG5", /* GPIO_126 */
+ "NC", /* GPIO_127 */
+ "NC", /* GPIO_128 */
+ "BOOT_CONFIG7", /* GPIO_129 */
+ "PCIE1_RST_N", /* GPIO_130 */
+ "PCIE1_CLKREQ_N", /* GPIO_131 */
+ "PCIE1_WAKE", /* GPIO_132 */
+ "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+ "NC", /* GPIO_134 */
+ "NC", /* GPIO_135 */
+ "BOOT_CONFIG8", /* GPIO_136 */
+ "NC", /* GPIO_137 */
+ "NC", /* GPIO_138 */
+ "GPS_SSBI2", /* GPIO_139 */
+ "GPS_SSBI1", /* GPIO_140 */
+ "NC", /* GPIO_141 */
+ "NC", /* GPIO_142 */
+ "NC", /* GPIO_143 */
+ "BOOT_CONFIG6", /* GPIO_144 */
+ "NC", /* GPIO_145 */
+ "NC", /* GPIO_146 */
+ "NC", /* GPIO_147 */
+ "NC", /* GPIO_148 */
+ "NC"; /* GPIO_149 */
+
+ sdc2_cd_on: sdc2_cd_on {
+ mux {
+ pins = "gpio38";
+ function = "gpio";
};
- phy@7411000 {
- status = "okay";
+ config {
+ pins = "gpio38";
+ bias-pull-up; /* pull up */
+ drive-strength = <16>; /* 16 MA */
};
+ };
- phy@7412000 {
- status = "okay";
+ sdc2_cd_off: sdc2_cd_off {
+ mux {
+ pins = "gpio38";
+ function = "gpio";
};
- usb@6af8800 {
- status = "okay";
- extcon = <&usb3_id>;
+ config {
+ pins = "gpio38";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
- dwc3@6a00000 {
- extcon = <&usb3_id>;
- dr_mode = "otg";
- };
+ blsp1_uart1_default: blsp1_uart1_default {
+ mux {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "blsp_uart2";
};
- usb3_id: usb3-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_det_gpio>;
+ config {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ drive-strength = <16>;
+ bias-disable;
};
+ };
- usb@76f8800 {
- status = "okay";
- extcon = <&usb2_id>;
+ blsp1_uart1_sleep: blsp1_uart1_sleep {
+ mux {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "gpio";
+ };
- dwc3@7600000 {
- extcon = <&usb2_id>;
- dr_mode = "otg";
- maximum-speed = "high-speed";
- };
+ config {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ drive-strength = <2>;
+ bias-disable;
};
+ };
- usb2_id: usb2-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_det_gpio>;
+ hdmi_hpd_active: hdmi_hpd_active {
+ mux {
+ pins = "gpio34";
+ function = "hdmi_hot";
};
- wlan_en: wlan-en-1-8v {
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_en_gpios>;
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ config {
+ pins = "gpio34";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
- gpio = <&pm8994_gpios 8 0>;
+ hdmi_hpd_suspend: hdmi_hpd_suspend {
+ mux {
+ pins = "gpio34";
+ function = "hdmi_hot";
+ };
- /* WLAN card specific delay */
- startup-delay-us = <70000>;
- enable-active-high;
+ config {
+ pins = "gpio34";
+ bias-pull-down;
+ drive-strength = <2>;
};
+ };
- agnoc@0 {
- pcie@600000 {
- status = "okay";
- perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
- vddpe-3v3-supply = <&wlan_en>;
- };
+ hdmi_ddc_active: hdmi_ddc_active {
+ mux {
+ pins = "gpio32", "gpio33";
+ function = "hdmi_ddc";
+ };
- pcie@608000 {
- status = "okay";
- perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
- };
+ config {
+ pins = "gpio32", "gpio33";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
- pcie@610000 {
- status = "okay";
- perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
- };
+ hdmi_ddc_suspend: hdmi_ddc_suspend {
+ mux {
+ pins = "gpio32", "gpio33";
+ function = "hdmi_ddc";
};
- slim_msm: slim@91c0000 {
- ngd@1 {
- wcd9335: codec@1{
- clock-names = "mclk", "slimbus";
- clocks = <&div1_mclk>,
- <&rpmcc RPM_SMD_BB_CLK1>;
- };
- };
+ config {
+ pins = "gpio32", "gpio33";
+ drive-strength = <2>;
+ bias-pull-down;
};
+ };
+};
- mdss@900000 {
- status = "okay";
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&wlan_en>;
+ vdda-supply = <&vreg_l28a_0p925>;
+};
- mdp@901000 {
- status = "okay";
- };
+&pcie1 {
+ status = "okay";
+ perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&vreg_l28a_0p925>;
+};
- hdmi-phy@9a0600 {
- status = "okay";
+&pcie2 {
+ status = "okay";
+ perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&vreg_l28a_0p925>;
+};
- vddio-supply = <&pm8994_l12>;
- vcca-supply = <&pm8994_l28>;
- #phy-cells = <0>;
- };
+&pcie_phy {
+ status = "okay";
- hdmi-tx@9a0000 {
- status = "okay";
+ vdda-phy-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+};
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
- pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+&pm8994_gpios {
+ gpio-line-names =
+ "NC",
+ "KEY_VOLP_N",
+ "NC",
+ "BL1_PWM",
+ "GPIO-F", /* BL0_PWM, LSEC pin 28 */
+ "BL1_EN",
+ "NC",
+ "WLAN_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "DIVCLK1",
+ "DIVCLK2",
+ "DIVCLK3",
+ "DIVCLK4",
+ "BT_EN",
+ "PMIC_SLB",
+ "PMIC_BUA",
+ "USB_VBUS_DET";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+ ls_exp_gpio_f: pm8994_gpio5 {
+ pinconf {
+ pins = "gpio5";
+ output-low;
+ power-source = <2>; // PM8994_GPIO_S4, 1.8V
+ };
+ };
- core-vdda-supply = <&pm8994_l12>;
- core-vcc-supply = <&pm8994_s4>;
- };
+ bt_en_gpios: bt_en_gpios {
+ pinconf {
+ pins = "gpio19";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
};
};
+ wlan_en_gpios: wlan_en_gpios {
+ pinconf {
+ pins = "gpio8";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+ };
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
+ audio_mclk: clk_div1 {
+ pinconf {
+ pins = "gpio15";
+ function = "func1";
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&volume_up_gpio>;
+ volume_up_gpio: pm8996_gpio2 {
+ pinconf {
+ pins = "gpio2";
+ function = "normal";
+ input-enable;
+ drive-push-pull;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
- button@0 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+ divclk4_pin_a: divclk4 {
+ pinconf {
+ pins = "gpio18";
+ function = PMIC_GPIO_FUNC_FUNC2;
+
+ bias-disable;
+ power-source = <PM8994_GPIO_S4>;
};
};
- rpm-glink {
- rpm_requests {
- pm8994-regulators {
- vdd_l1-supply = <&pm8994_s3>;
- vdd_l2_l26_l28-supply = <&pm8994_s3>;
- vdd_l3_l11-supply = <&pm8994_s3>;
- vdd_l4_l27_l31-supply = <&pm8994_s3>;
- vdd_l5_l7-supply = <&pm8994_s5>;
- vdd_l14_l15-supply = <&pm8994_s5>;
- vdd_l20_l21-supply = <&pm8994_s5>;
- vdd_l25-supply = <&pm8994_s3>;
-
- s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- /**
- * 1.8v required on LS expansion
- * for mezzanine boards
- */
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
- s7 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
-
- l1 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- l2 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- };
- l3 {
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- };
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
- l6 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- l11 {
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- };
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
- l17 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
- l18 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2900000>;
- };
- l19 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- };
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
- l22 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
- l25 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-allow-set-load;
- };
- l27 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- l28 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <925000>;
- regulator-allow-set-load;
- };
- l29 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- l30 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- l32 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
+ usb3_vbus_det_gpio: pm8996_gpio22 {
+ pinconf {
+ pins = "gpio22";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
-&spmi_bus {
- pmic@0 {
- pon@800 {
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
+&pm8994_mpps {
+ gpio-line-names =
+ "VDDPX_BIAS",
+ "WIFI_LED",
+ "NC",
+ "BT_LED",
+ "PM_MPP05",
+ "PM_MPP06",
+ "PM_MPP07",
+ "NC";
+};
+
+&pm8994_spmi_regulators {
+ qcom,saw-reg = <&saw3>;
+ s9 {
+ qcom,saw-slave;
+ };
+ s10 {
+ qcom,saw-slave;
+ };
+ s11 {
+ qcom,saw-leader;
+ regulator-always-on;
+ regulator-min-microvolt = <1230000>;
+ regulator-max-microvolt = <1230000>;
+ };
+};
+
+&pmi8994_gpios {
+ gpio-line-names =
+ "NC",
+ "SPKR_AMP_EN1",
+ "SPKR_AMP_EN2",
+ "TP61",
+ "NC",
+ "USB2_VBUS_DET",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+
+ usb2_vbus_det_gpio: pmi8996_gpio6 {
+ pinconf {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
+&rpm_requests {
+ pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+ vdd_l3_l11-supply = <&vreg_s8a_l3a_input>;
+ vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+ vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+ vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+ vdd_l8_l16_l30-supply = <&vph_pwr>;
+ vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+ vdd_l25-supply = <&vreg_s3a_1p3>;
+ vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p3: s3 {
+ regulator-name = "vreg_s3a_1p3";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ /**
+ * 1.8v required on LS expansion
+ * for mezzanine boards
+ */
+ vreg_s4a_1p8: s4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ vreg_s5a_2p15: s5 {
+ regulator-name = "vreg_s5a_2p15";
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+ vreg_s7a_1p0: s7 {
+ regulator-name = "vreg_s7a_1p0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_l1a_1p0: l1 {
+ regulator-name = "vreg_l1a_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l2a_1p25: l2 {
+ regulator-name = "vreg_l2a_1p25";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+ vreg_l3a_0p875: l3 {
+ regulator-name = "vreg_l3a_0p875";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ };
+ vreg_l4a_1p225: l4 {
+ regulator-name = "vreg_l4a_1p225";
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ vreg_l6a_1p2: l6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l8a_1p8: l8 {
+ regulator-name = "vreg_l8a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l9a_1p8: l9 {
+ regulator-name = "vreg_l9a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l10a_1p8: l10 {
+ regulator-name = "vreg_l10a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l11a_1p15: l11 {
+ regulator-name = "vreg_l11a_1p15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+ vreg_l12a_1p8: l12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l13a_2p95: l13 {
+ regulator-name = "vreg_l13a_2p95";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ vreg_l14a_1p8: l14 {
+ regulator-name = "vreg_l14a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l15a_1p8: l15 {
+ regulator-name = "vreg_l15a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l16a_2p7: l16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+ vreg_l17a_2p8: l17 {
+ regulator-name = "vreg_l17a_2p8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ vreg_l18a_2p85: l18 {
+ regulator-name = "vreg_l18a_2p85";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2900000>;
+ };
+ vreg_l19a_2p8: l19 {
+ regulator-name = "vreg_l19a_2p8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ vreg_l20a_2p95: l20 {
+ regulator-name = "vreg_l20a_2p95";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+ vreg_l21a_2p95: l21 {
+ regulator-name = "vreg_l21a_2p95";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+ vreg_l22a_3p0: l22 {
+ regulator-name = "vreg_l22a_3p0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ vreg_l23a_2p8: l23 {
+ regulator-name = "vreg_l23a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l24a_3p075: l24 {
+ regulator-name = "vreg_l24a_3p075";
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ vreg_l25a_1p2: l25 {
+ regulator-name = "vreg_l25a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ };
+ vreg_l26a_0p8: l27 {
+ regulator-name = "vreg_l26a_0p8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l28a_0p925: l28 {
+ regulator-name = "vreg_l28a_0p925";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-allow-set-load;
+ };
+ vreg_l29a_2p8: l29 {
+ regulator-name = "vreg_l29a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l30a_1p8: l30 {
+ regulator-name = "vreg_l30a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l32a_1p8: l32 {
+ regulator-name = "vreg_l32a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-name = "vreg_lvs1a_1p8";
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-name = "vreg_lvs2a_1p8";
+ };
+ };
+};
+
+&sdhc2 {
+ /* External SD card */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ cd-gpios = <&msmgpio 38 0x1>;
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+ status = "okay";
+};
+
&sound {
compatible = "qcom,apq8096-sndcard";
model = "DB820c";
@@ -754,3 +979,84 @@
};
};
};
+
+&spmi_bus {
+ pmic@0 {
+ pon@800 {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+};
+
+&ufsphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+
+ vdda-phy-max-microamp = <18380>;
+ vdda-pll-max-microamp = <9440>;
+
+ vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+ vddp-ref-clk-max-microamp = <100>;
+ vddp-ref-clk-always-on;
+};
+
+&ufshc {
+ status = "okay";
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l25a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+
+ vcc-max-microamp = <600000>;
+ vccq-max-microamp = <450000>;
+ vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+ status = "okay";
+ extcon = <&usb2_id>;
+
+ dwc3@7600000 {
+ extcon = <&usb2_id>;
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+ };
+};
+
+&usb3 {
+ status = "okay";
+ extcon = <&usb3_id>;
+
+ dwc3@6a00000 {
+ extcon = <&usb3_id>;
+ dr_mode = "otg";
+ };
+};
+
+&usb3phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+
+};
+
+&wcd9335 {
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
new file mode 100644
index 000000000000..f6ddf17ada81
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Inforce 6640 Single Board Computer";
+ compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096";
+
+ qcom,msm-id = <291 0x00030001>;
+ qcom,board-id = <0x00010018 0>;
+
+ aliases {
+ serial0 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ v1p05: v1p05-regulator {
+ compatible = "regulator-fixed";
+ reglator-name = "v1p05";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+
+ vin-supply = <&v5p0>;
+ };
+
+ v12_poe: v12-poe-regulator {
+ compatible = "regulator-fixed";
+ reglator-name = "v12_poe";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ v3p3: v3p3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v3p3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&v12_poe>;
+ };
+
+ v5p0: v5p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "v5p0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&v12_poe>;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart1_2pins_default>;
+ pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
+
+&msmgpio {
+ sdc2_pins_default: sdc2-pins-default {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ cd {
+ pins = "gpio38";
+ function = "gpio";
+
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_pins_sleep: sdc2-pins-sleep {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ cd {
+ pins = "gpio38";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+};
+
+&rpm_requests {
+ pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+ vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+ vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+ vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+ vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+ vdd_l8_l16_l30-supply = <&vph_pwr>;
+ vdd_l25-supply = <&vreg_s3a_1p3>;
+ vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p3: s3 {
+ regulator-name = "vreg_s3a_1p3";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ vreg_s4a_1p8: s4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ vreg_s5a_2p15: s5 {
+ regulator-name = "vreg_s5a_2p15";
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+ vreg_s7a_1p0: s7 {
+ regulator-name = "vreg_s7a_1p0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_l1a_1p0: l1 {
+ regulator-name = "vreg_l1a_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l2a_1p25: l2 {
+ regulator-name = "vreg_l2a_1p25";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+ vreg_l3a_0p875: l3 {
+ regulator-name = "vreg_l3a_0p875";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ };
+ vreg_l4a_1p225: l4 {
+ regulator-name = "vreg_l4a_1p225";
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ vreg_l6a_1p2: l6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l8a_1p8: l8 {
+ regulator-name = "vreg_l8a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l9a_1p8: l9 {
+ regulator-name = "vreg_l9a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l10a_1p8: l10 {
+ regulator-name = "vreg_l10a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l11a_1p15: l11 {
+ regulator-name = "vreg_l11a_1p15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+ vreg_l12a_1p8: l12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l13a_2p95: l13 {
+ regulator-name = "vreg_l13a_2p95";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ vreg_l14a_1p8: l14 {
+ regulator-name = "vreg_l14a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l15a_1p8: l15 {
+ regulator-name = "vreg_l15a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l16a_2p7: l16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+ vreg_l17a_2p8: l17 {
+ regulator-name = "vreg_l17a_2p8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ vreg_l18a_2p85: l18 {
+ regulator-name = "vreg_l18a_2p85";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2900000>;
+ };
+ vreg_l19a_2p8: l19 {
+ regulator-name = "vreg_l19a_2p8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ vreg_l20a_2p95: l20 {
+ regulator-name = "vreg_l20a_2p95";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+ vreg_l21a_2p95: l21 {
+ regulator-name = "vreg_l21a_2p95";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ vreg_l22a_3p0: l22 {
+ regulator-name = "vreg_l22a_3p0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ vreg_l23a_2p8: l23 {
+ regulator-name = "vreg_l23a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l24a_3p075: l24 {
+ regulator-name = "vreg_l24a_3p075";
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ vreg_l25a_1p2: l25 {
+ regulator-name = "vreg_l25a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ };
+ vreg_l26a_0p8: l27 {
+ regulator-name = "vreg_l26a_0p8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l28a_0p925: l28 {
+ regulator-name = "vreg_l28a_0p925";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-allow-set-load;
+ };
+ vreg_l29a_2p8: l29 {
+ regulator-name = "vreg_l29a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l30a_1p8: l30 {
+ regulator-name = "vreg_l30a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l32a_1p8: l32 {
+ regulator-name = "vreg_l32a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-name = "vreg_lvs1a_1p8";
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-name = "vreg_lvs2a_1p8";
+ };
+ };
+};
+
+&sdhc2 {
+ status = "okay";
+
+ bus-width = <4>;
+
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_pins_default>;
+ pinctrl-1 = <&sdc2_pins_sleep>;
+};
+
+&ufshc {
+ status = "okay";
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l25a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+
+ vcc-max-microamp = <600000>;
+ vccq-max-microamp = <450000>;
+ vccq2-max-microamp = <450000>;
+};
+
+&ufsphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+
+ vdda-phy-max-microamp = <18380>;
+ vdda-pll-max-microamp = <9440>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8686e101905c..a6a2ac88f042 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -429,7 +429,8 @@
compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
reg = <0xb011000 0x1000>;
#mbox-cells = <1>;
- clocks = <&a53pll>;
+ clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+ clock-names = "pll", "aux";
#clock-cells = <0>;
};
@@ -816,6 +817,8 @@
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
nvmem-cell-names = "calib", "calib_sel";
#qcom,sensors = <5>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 4ca2e7b44559..7ae082ea14ea 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -16,72 +16,19 @@
chosen { };
- memory {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- mba_region: mba@91500000 {
- reg = <0x0 0x91500000 0x0 0x200000>;
- no-map;
- };
-
- slpi_region: slpi@90b00000 {
- reg = <0x0 0x90b00000 0x0 0xa00000>;
- no-map;
- };
-
- venus_region: venus@90400000 {
- reg = <0x0 0x90400000 0x0 0x700000>;
- no-map;
- };
-
- adsp_region: adsp@8ea00000 {
- reg = <0x0 0x8ea00000 0x0 0x1a00000>;
- no-map;
- };
-
- mpss_region: mpss@88800000 {
- reg = <0x0 0x88800000 0x0 0x6200000>;
- no-map;
- };
-
- smem_mem: smem-mem@86000000 {
- reg = <0x0 0x86000000 0x0 0x200000>;
- no-map;
- };
-
- memory@85800000 {
- reg = <0x0 0x85800000 0x0 0x800000>;
- no-map;
- };
-
- memory@86200000 {
- reg = <0x0 0x86200000 0x0 0x2600000>;
- no-map;
- };
-
- rmtfs@86700000 {
- compatible = "qcom,rmtfs-mem";
-
- size = <0x0 0x200000>;
- alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
- no-map;
-
- qcom,client-id = <1>;
- qcom,vmid = <15>;
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
};
- zap_shader_region: gpu@8f200000 {
- compatible = "shared-dma-pool";
- reg = <0x0 0x90b00000 0x0 0xa00000>;
- no-map;
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ clock-output-names = "sleep_clk";
};
};
@@ -173,291 +120,93 @@
};
};
- thermal-zones {
- cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 3>;
-
- trips {
- cpu0_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu0_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 5>;
-
- trips {
- cpu1_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu1_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 8>;
-
- trips {
- cpu2_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu2_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 10>;
-
- trips {
- cpu3_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu3_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- gpu-thermal-top {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 6>;
-
- trips {
- gpu1_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8996";
+ qcom,dload-mode = <&tcsr 0x13000>;
};
+ };
- gpu-thermal-bottom {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 7>;
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
- trips {
- gpu2_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
- m4m-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
- thermal-sensors = <&tsens0 1>;
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- trips {
- m4m_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ mba_region: mba@91500000 {
+ reg = <0x0 0x91500000 0x0 0x200000>;
+ no-map;
};
- l3-or-venus-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 2>;
-
- trips {
- l3_or_venus_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ slpi_region: slpi@90b00000 {
+ reg = <0x0 0x90b00000 0x0 0xa00000>;
+ no-map;
};
- cluster0-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 7>;
-
- trips {
- cluster0_l2_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ venus_region: venus@90400000 {
+ reg = <0x0 0x90400000 0x0 0x700000>;
+ no-map;
};
- cluster1-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 12>;
-
- trips {
- cluster1_l2_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ adsp_region: adsp@8ea00000 {
+ reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+ no-map;
};
- camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 1>;
-
- trips {
- camera_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ mpss_region: mpss@88800000 {
+ reg = <0x0 0x88800000 0x0 0x6200000>;
+ no-map;
};
- q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 2>;
-
- trips {
- q6_dsp_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ smem_mem: smem-mem@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
};
- mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 3>;
-
- trips {
- mem_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
};
- modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 4>;
-
- trips {
- modemtx_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
};
- };
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
+ rmtfs@86700000 {
+ compatible = "qcom,rmtfs-mem";
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- clock-output-names = "xo_board";
- };
+ size = <0x0 0x200000>;
+ alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ no-map;
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32764>;
- clock-output-names = "sleep_clk";
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
};
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-msm8996";
- qcom,dload-mode = <&tcsr 0x13000>;
+ zap_shader_region: gpu@8f200000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x90b00000 0x0 0xa00000>;
+ no-map;
};
};
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x1000>;
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- hwlocks = <&tcsr_mutex 3>;
- };
-
rpm-glink {
compatible = "qcom,glink-rpm";
@@ -467,7 +216,7 @@
mboxes = <&apcs_glb 0>;
- rpm_requests {
+ rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8996";
qcom,glink-channels = "rpm_requests";
@@ -509,57 +258,83 @@
};
};
};
+ };
+ };
- pm8994-regulators {
- compatible = "qcom,rpm-pm8994-regulators";
-
- pm8994_s1: s1 {};
- pm8994_s2: s2 {};
- pm8994_s3: s3 {};
- pm8994_s4: s4 {};
- pm8994_s5: s5 {};
- pm8994_s6: s6 {};
- pm8994_s7: s7 {};
- pm8994_s8: s8 {};
- pm8994_s9: s9 {};
- pm8994_s10: s10 {};
- pm8994_s11: s11 {};
- pm8994_s12: s12 {};
-
- pm8994_l1: l1 {};
- pm8994_l2: l2 {};
- pm8994_l3: l3 {};
- pm8994_l4: l4 {};
- pm8994_l5: l5 {};
- pm8994_l6: l6 {};
- pm8994_l7: l7 {};
- pm8994_l8: l8 {};
- pm8994_l9: l9 {};
- pm8994_l10: l10 {};
- pm8994_l11: l11 {};
- pm8994_l12: l12 {};
- pm8994_l13: l13 {};
- pm8994_l14: l14 {};
- pm8994_l15: l15 {};
- pm8994_l16: l16 {};
- pm8994_l17: l17 {};
- pm8994_l18: l18 {};
- pm8994_l19: l19 {};
- pm8994_l20: l20 {};
- pm8994_l21: l21 {};
- pm8994_l22: l22 {};
- pm8994_l23: l23 {};
- pm8994_l24: l24 {};
- pm8994_l25: l25 {};
- pm8994_l26: l26 {};
- pm8994_l27: l27 {};
- pm8994_l28: l28 {};
- pm8994_l29: l29 {};
- pm8994_l30: l30 {};
- pm8994_l31: l31 {};
- pm8994_l32: l32 {};
- };
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 26>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ smp2p_slpi_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ smp2p_slpi_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
};
};
@@ -569,9 +344,90 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ pcie_phy: phy@34000 {
+ compatible = "qcom,msm8996-qmp-pcie-phy";
+ reg = <0x00034000 0x488>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_PCIE_PHY_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+ reset-names = "phy", "common", "cfg";
+ status = "disabled";
+
+ pciephy_0: lane@35000 {
+ reg = <0x00035000 0x130>,
+ <0x00035200 0x200>,
+ <0x00035400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_0_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "lane0";
+ };
+
+ pciephy_1: lane@36000 {
+ reg = <0x00036000 0x130>,
+ <0x00036200 0x200>,
+ <0x00036400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_1_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe1";
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "lane1";
+ };
+
+ pciephy_2: lane@37000 {
+ reg = <0x00037000 0x130>,
+ <0x00037200 0x200>,
+ <0x00037400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_2_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "pipe2";
+ resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+ reset-names = "lane2";
+ };
+ };
+
rpm_msg_ram: memory@68000 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x68000 0x6000>;
+ reg = <0x00068000 0x6000>;
+ };
+
+ qfprom@74000 {
+ compatible = "qcom,qfprom";
+ reg = <0x00074000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2p_hstx_trim: hstx_trim@24e {
+ reg = <0x24e 0x2>;
+ bits = <5 4>;
+ };
+
+ qusb2s_hstx_trim: hstx_trim@24f {
+ reg = <0x24f 0x1>;
+ bits = <1 4>;
+ };
+
+ gpu_speed_bin: gpu_speed_bin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
};
rng: rng@83000 {
@@ -581,60 +437,790 @@
clock-names = "core";
};
- tcsr_mutex_regs: syscon@740000 {
- compatible = "syscon";
- reg = <0x740000 0x20000>;
+ gcc: clock-controller@300000 {
+ compatible = "qcom,gcc-msm8996";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x00300000 0x90000>;
};
tsens0: thermal-sensor@4a9000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
- interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@4ad000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4ad000 0x1000>, /* TM */
- <0x4ac000 0x1000>; /* SROT */
+ reg = <0x004ad000 0x1000>, /* TM */
+ <0x004ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
+ tcsr_mutex_regs: syscon@740000 {
+ compatible = "syscon";
+ reg = <0x00740000 0x20000>;
+ };
+
tcsr: syscon@7a0000 {
compatible = "qcom,tcsr-msm8996", "syscon";
- reg = <0x7a0000 0x18000>;
+ reg = <0x007a0000 0x18000>;
};
- intc: interrupt-controller@9bc0000 {
- compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
- #interrupt-cells = <3>;
+ mmcc: clock-controller@8c0000 {
+ compatible = "qcom,mmcc-msm8996";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x008c0000 0x40000>;
+ assigned-clocks = <&mmcc MMPLL9_PLL>,
+ <&mmcc MMPLL1_PLL>,
+ <&mmcc MMPLL3_PLL>,
+ <&mmcc MMPLL4_PLL>,
+ <&mmcc MMPLL5_PLL>;
+ assigned-clock-rates = <624000000>,
+ <810000000>,
+ <980000000>,
+ <960000000>,
+ <825000000>;
+ };
+
+ mdss: mdss@900000 {
+ compatible = "qcom,mdss";
+
+ reg = <0x00900000 0x1000>,
+ <0x009b0000 0x1040>,
+ <0x009b8000 0x1040>;
+ reg-names = "mdss_phys",
+ "vbif_phys",
+ "vbif_nrt_phys";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
interrupt-controller;
- #redistributor-regions = <1>;
- redistributor-stride = <0x0 0x40000>;
- reg = <0x09bc0000 0x10000>,
- <0x09c00000 0x100000>;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>;
+ clock-names = "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: mdp@901000 {
+ compatible = "qcom,mdp5";
+ reg = <0x00901000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "iommu",
+ "vsync";
+
+ iommus = <&mdp_smmu 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf3_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
+
+ hdmi: hdmi-tx@9a0000 {
+ compatible = "qcom,hdmi-tx-8996";
+ reg = <0x009a0000 0x50c>,
+ <0x00070000 0x6158>,
+ <0x009e0000 0xfff>;
+ reg-names = "core_physical",
+ "qfprom_physical",
+ "hdcp_physical";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_HDMI_CLK>,
+ <&mmcc MDSS_HDMI_AHB_CLK>,
+ <&mmcc MDSS_EXTPCLK_CLK>;
+ clock-names =
+ "mdp_core",
+ "iface",
+ "core",
+ "alt_iface",
+ "extp";
+
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi_phy";
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&mdp5_intf3_out>;
+ };
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@9a0600 {
+ #phy-cells = <0>;
+ compatible = "qcom,hdmi-phy-8996";
+ reg = <0x009a0600 0x1c4>,
+ <0x009a0a00 0x124>,
+ <0x009a0c00 0x124>,
+ <0x009a0e00 0x124>,
+ <0x009a1000 0x124>,
+ <0x009a1200 0x0c8>;
+ reg-names = "hdmi_pll",
+ "hdmi_tx_l0",
+ "hdmi_tx_l1",
+ "hdmi_tx_l2",
+ "hdmi_tx_l3",
+ "hdmi_phy";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&gcc GCC_HDMI_CLKREF_CLK>;
+ clock-names = "iface",
+ "ref";
+ };
};
+ gpu@b00000 {
+ compatible = "qcom,adreno-530.2", "qcom,adreno";
+ #stream-id-cells = <16>;
- apcs_glb: mailbox@9820000 {
- compatible = "qcom,msm8996-apcs-hmss-global";
- reg = <0x9820000 0x1000>;
+ reg = <0x00b00000 0x3f000>;
+ reg-names = "kgsl_3d0_reg_memory";
- #mbox-cells = <1>;
+ interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+ <&mmcc GPU_AHB_CLK>,
+ <&mmcc GPU_GX_RBBMTIMER_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+
+ clock-names = "core",
+ "iface",
+ "rbbmtimer",
+ "mem",
+ "mem_iface";
+
+ power-domains = <&mmcc GPU_GDSC>;
+ iommus = <&adreno_smmu 0>;
+
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
+ qcom,gpu-quirk-two-pass-use-wfi;
+ qcom,gpu-quirk-fault-detect-mask;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp-table {
+ compatible ="operating-points-v2";
+
+ /*
+ * 624Mhz and 560Mhz are only available on speed
+ * bin (1 << 0). All the rest are available on
+ * all bins of the hardware
+ */
+ opp-624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-supported-hw = <0x01>;
+ };
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ opp-supported-hw = <0x01>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-401800000 {
+ opp-hz = /bits/ 64 <401800000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-214000000 {
+ opp-hz = /bits/ 64 <214000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-133000000 {
+ opp-hz = /bits/ 64 <133000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ };
+
+ zap-shader {
+ memory-region = <&zap_shader_region>;
+ };
};
- gcc: clock-controller@300000 {
- compatible = "qcom,gcc-msm8996";
- #clock-cells = <1>;
+ msmgpio: pinctrl@1010000 {
+ compatible = "qcom,msm8996-pinctrl";
+ reg = <0x01010000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spmi_bus: qcom,spmi@400f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0400f000 0x1000>,
+ <0x04400000 0x800000>,
+ <0x04c00000 0x800000>,
+ <0x05800000 0x200000>,
+ <0x0400a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ agnoc@0 {
+ power-domains = <&gcc AGGRE0_NOC_GDSC>;
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pcie0: pcie@600000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ status = "disabled";
+ power-domains = <&gcc PCIE0_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ reg = <0x00600000 0x2000>,
+ <0x0c000000 0xf1d>,
+ <0x0c000f20 0xa8>,
+ <0x0c100000 0x100000>;
+ reg-names = "parf", "dbi", "elbi","config";
+
+ phys = <&pciephy_0>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
+ pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+
+ linux,pci-domain = <0>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+
+ };
+
+ pcie1: pcie@608000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ power-domains = <&gcc PCIE1_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ status = "disabled";
+
+ reg = <0x00608000 0x2000>,
+ <0x0d000000 0xf1d>,
+ <0x0d000f20 0xa8>,
+ <0x0d100000 0x100000>;
+
+ reg-names = "parf", "dbi", "elbi","config";
+
+ phys = <&pciephy_1>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+ interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
+ pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+
+ linux,pci-domain = <1>;
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+ };
+
+ pcie2: pcie@610000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ power-domains = <&gcc PCIE2_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ status = "disabled";
+ reg = <0x00610000 0x2000>,
+ <0x0e000000 0xf1d>,
+ <0x0e000f20 0xa8>,
+ <0x0e100000 0x100000>;
+
+ reg-names = "parf", "dbi", "elbi","config";
+
+ phys = <&pciephy_2>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+ device_type = "pci";
+
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
+ pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+
+ linux,pci-domain = <2>;
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+ <&gcc GCC_PCIE_2_AUX_CLK>,
+ <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+ };
+ };
+
+ ufshc: ufshc@624000 {
+ compatible = "qcom,ufshc";
+ reg = <0x00624000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&ufsphy>;
+ phy-names = "ufsphy";
+
+ power-domains = <&gcc UFS_GDSC>;
+
+ clock-names =
+ "core_clk_src",
+ "core_clk",
+ "bus_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro_src",
+ "core_clk_unipro",
+ "core_clk_ice",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk";
+ clocks =
+ <&gcc UFS_AXI_CLK_SRC>,
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc UFS_ICE_CORE_CLK_SRC>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&gcc GCC_UFS_ICE_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+ freq-table-hz =
+ <100000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <150000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ lanes-per-direction = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x300000 0x90000>;
+ status = "disabled";
+
+ ufs_variant {
+ compatible = "qcom,ufs_variant";
+ };
+ };
+
+ ufsphy: phy@627000 {
+ compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
+ reg = <0x00627000 0xda8>;
+ reg-names = "phy_mem";
+ #phy-cells = <0>;
+
+ clock-names = "ref_clk_src", "ref_clk";
+ clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_CLKREF_CLK>;
+ resets = <&ufshc 0>;
+ status = "disabled";
+ };
+
+ camss: camss@a00000 {
+ compatible = "qcom,msm8996-camss";
+ reg = <0x00a34000 0x1000>,
+ <0x00a00030 0x4>,
+ <0x00a35000 0x1000>,
+ <0x00a00038 0x4>,
+ <0x00a36000 0x1000>,
+ <0x00a00040 0x4>,
+ <0x00a30000 0x100>,
+ <0x00a30400 0x100>,
+ <0x00a30800 0x100>,
+ <0x00a30c00 0x100>,
+ <0x00a31000 0x500>,
+ <0x00a00020 0x10>,
+ <0x00a10000 0x1000>,
+ <0x00a14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 0>,
+ <GIC_SPI 79 0>,
+ <GIC_SPI 80 0>,
+ <GIC_SPI 296 0>,
+ <GIC_SPI 297 0>,
+ <GIC_SPI 298 0>,
+ <GIC_SPI 299 0>,
+ <GIC_SPI 309 0>,
+ <GIC_SPI 314 0>,
+ <GIC_SPI 315 0>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ power-domains = <&mmcc VFE0_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+ iommus = <&vfe_smmu 0>,
+ <&vfe_smmu 1>,
+ <&vfe_smmu 2>,
+ <&vfe_smmu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ adreno_smmu: iommu@b40000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00b40000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+
+ clocks = <&mmcc GPU_AHB_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc GPU_GDSC>;
+ };
+
+ video-codec@c00000 {
+ compatible = "qcom,msm8996-venus";
+ reg = <0x00c00000 0xff000>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc VENUS_GDSC>;
+ clocks = <&mmcc VIDEO_CORE_CLK>,
+ <&mmcc VIDEO_AHB_CLK>,
+ <&mmcc VIDEO_AXI_CLK>,
+ <&mmcc VIDEO_MAXI_CLK>;
+ clock-names = "core", "iface", "bus", "mbus";
+ iommus = <&venus_smmu 0x00>,
+ <&venus_smmu 0x01>,
+ <&venus_smmu 0x0a>,
+ <&venus_smmu 0x07>,
+ <&venus_smmu 0x0e>,
+ <&venus_smmu 0x0f>,
+ <&venus_smmu 0x08>,
+ <&venus_smmu 0x09>,
+ <&venus_smmu 0x0b>,
+ <&venus_smmu 0x0c>,
+ <&venus_smmu 0x0d>,
+ <&venus_smmu 0x10>,
+ <&venus_smmu 0x11>,
+ <&venus_smmu 0x21>,
+ <&venus_smmu 0x28>,
+ <&venus_smmu 0x29>,
+ <&venus_smmu 0x2b>,
+ <&venus_smmu 0x2c>,
+ <&venus_smmu 0x2d>,
+ <&venus_smmu 0x31>;
+ memory-region = <&venus_region>;
+ status = "okay";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE0_GDSC>;
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE1_GDSC>;
+ };
+ };
+
+ mdp_smmu: iommu@d00000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00d00000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ clocks = <&mmcc SMMU_MDP_AHB_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ };
+
+ venus_smmu: iommu@d40000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00d40000 0x20000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
+ clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
+ <&mmcc SMMU_VIDEO_AXI_CLK>;
+ clock-names = "iface", "bus";
+ #iommu-cells = <1>;
+ status = "okay";
+ };
+
+ vfe_smmu: iommu@da0000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00da0000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+ clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+ <&mmcc SMMU_VFE_AXI_CLK>;
+ clock-names = "iface",
+ "bus";
+ #iommu-cells = <1>;
+ };
+
+ lpass_q6_smmu: iommu@1600000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x01600000 0x20000>;
+ #iommu-cells = <1>;
+ power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+ <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+ clock-names = "iface", "bus";
};
stm@3002000 {
@@ -1104,13 +1690,119 @@
};
};
};
-
kryocc: clock-controller@6400000 {
compatible = "qcom,apcc-msm8996";
- reg = <0x6400000 0x90000>;
+ reg = <0x06400000 0x90000>;
+ #clock-cells = <1>;
+ };
+
+ usb3: usb@6af8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x06af8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ status = "disabled";
+
+ dwc3@6a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x06a00000 0xcc00>;
+ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ };
+ };
+
+ usb3phy: phy@7410000 {
+ compatible = "qcom,msm8996-qmp-usb3-phy";
+ reg = <0x07410000 0x1c4>;
#clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy", "common";
+ status = "disabled";
+
+ ssusb_phy_0: lane@7410200 {
+ reg = <0x07410200 0x200>,
+ <0x07410400 0x130>,
+ <0x07410600 0x1a8>;
+ #phy-cells = <0>;
+
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ };
};
+ hsusb_phy1: phy@7411000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x07411000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ status = "disabled";
+ };
+
+ hsusb_phy2: phy@7412000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x07412000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX2_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+ nvmem-cells = <&qusb2s_hstx_trim>;
+ status = "disabled";
+ };
+
+ sdhc2: sdhci@74a4900 {
+ status = "disabled";
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ bus-width = <4>;
+ };
+
blsp1_uart1: serial@7570000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x07570000 0x1000>;
@@ -1136,16 +1828,16 @@
status = "disabled";
};
- blsp2_i2c0: i2c@75b5000 {
+ blsp1_i2c2: i2c@7577000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x075b5000 0x1000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+ reg = <0x07577000 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c0_default>;
- pinctrl-1 = <&blsp2_i2c0_sleep>;
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1153,7 +1845,7 @@
blsp2_uart1: serial@75b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x75b0000 0x1000>;
+ reg = <0x075b0000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
@@ -1161,21 +1853,6 @@
status = "disabled";
};
- blsp2_i2c1: i2c@75b6000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x075b6000 0x1000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c1_default>;
- pinctrl-1 = <&blsp2_i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
blsp2_uart2: serial@75b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x075b1000 0x1000>;
@@ -1186,16 +1863,31 @@
status = "disabled";
};
- blsp1_i2c2: i2c@7577000 {
+ blsp2_i2c0: i2c@75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x07577000 0x1000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ reg = <0x075b5000 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_i2c2_default>;
- pinctrl-1 = <&blsp1_i2c2_sleep>;
+ pinctrl-0 = <&blsp2_i2c0_default>;
+ pinctrl-1 = <&blsp2_i2c0_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_i2c1: i2c@75b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x075b6000 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c1_default>;
+ pinctrl-1 = <&blsp2_i2c1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1216,369 +1908,9 @@
status = "disabled";
};
- sdhc2: sdhci@74a4900 {
- status = "disabled";
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
- bus-width = <4>;
- };
-
- msmgpio: pinctrl@1010000 {
- compatible = "qcom,msm8996-pinctrl";
- reg = <0x01010000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- timer@9840000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x09840000 0x1000>;
- clock-frequency = <19200000>;
-
- frame@9850000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09850000 0x1000>,
- <0x09860000 0x1000>;
- };
-
- frame@9870000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09870000 0x1000>;
- status = "disabled";
- };
-
- frame@9880000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09880000 0x1000>;
- status = "disabled";
- };
-
- frame@9890000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09890000 0x1000>;
- status = "disabled";
- };
-
- frame@98a0000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098a0000 0x1000>;
- status = "disabled";
- };
-
- frame@98b0000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098b0000 0x1000>;
- status = "disabled";
- };
-
- frame@98c0000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098c0000 0x1000>;
- status = "disabled";
- };
- };
-
- spmi_bus: qcom,spmi@400f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x400f000 0x1000>,
- <0x4400000 0x800000>,
- <0x4c00000 0x800000>,
- <0x5800000 0x200000>,
- <0x400a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- ufsphy: phy@627000 {
- compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x627000 0xda8>;
- reg-names = "phy_mem";
- #phy-cells = <0>;
-
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
-
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
-
- vddp-ref-clk-supply = <&pm8994_l25>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
-
- clock-names = "ref_clk_src", "ref_clk";
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_CLKREF_CLK>;
- resets = <&ufshc 0>;
- status = "disabled";
- };
-
- ufshc: ufshc@624000 {
- compatible = "qcom,ufshc";
- reg = <0x624000 0x2500>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-
- phys = <&ufsphy>;
- phy-names = "ufsphy";
-
- vcc-supply = <&pm8994_l20>;
- vccq-supply = <&pm8994_l25>;
- vccq2-supply = <&pm8994_s4>;
-
- vcc-max-microamp = <600000>;
- vccq-max-microamp = <450000>;
- vccq2-max-microamp = <450000>;
-
- power-domains = <&gcc UFS_GDSC>;
-
- clock-names =
- "core_clk_src",
- "core_clk",
- "bus_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro_src",
- "core_clk_unipro",
- "core_clk_ice",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk";
- clocks =
- <&gcc UFS_AXI_CLK_SRC>,
- <&gcc GCC_UFS_AXI_CLK>,
- <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
- <&gcc GCC_UFS_AHB_CLK>,
- <&gcc UFS_ICE_CORE_CLK_SRC>,
- <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
- <&gcc GCC_UFS_ICE_CORE_CLK>,
- <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
- freq-table-hz =
- <100000000 200000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <150000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
-
- lanes-per-direction = <1>;
- #reset-cells = <1>;
- status = "disabled";
-
- ufs_variant {
- compatible = "qcom,ufs_variant";
- };
- };
-
- mmcc: clock-controller@8c0000 {
- compatible = "qcom,mmcc-msm8996";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x8c0000 0x40000>;
- assigned-clocks = <&mmcc MMPLL9_PLL>,
- <&mmcc MMPLL1_PLL>,
- <&mmcc MMPLL3_PLL>,
- <&mmcc MMPLL4_PLL>,
- <&mmcc MMPLL5_PLL>;
- assigned-clock-rates = <624000000>,
- <810000000>,
- <980000000>,
- <960000000>,
- <825000000>;
- };
-
- qfprom@74000 {
- compatible = "qcom,qfprom";
- reg = <0x74000 0x8ff>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- qusb2p_hstx_trim: hstx_trim@24e {
- reg = <0x24e 0x2>;
- bits = <5 4>;
- };
-
- qusb2s_hstx_trim: hstx_trim@24f {
- reg = <0x24f 0x1>;
- bits = <1 4>;
- };
-
- gpu_speed_bin: gpu_speed_bin@133 {
- reg = <0x133 0x1>;
- bits = <5 3>;
- };
- };
-
- phy@34000 {
- compatible = "qcom,msm8996-qmp-pcie-phy";
- reg = <0x34000 0x488>;
- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
-
- resets = <&gcc GCC_PCIE_PHY_BCR>,
- <&gcc GCC_PCIE_PHY_COM_BCR>,
- <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
- reset-names = "phy", "common", "cfg";
- status = "disabled";
-
- pciephy_0: lane@35000 {
- reg = <0x035000 0x130>,
- <0x035200 0x200>,
- <0x035400 0x1dc>;
- #phy-cells = <0>;
-
- clock-output-names = "pcie_0_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
- resets = <&gcc GCC_PCIE_0_PHY_BCR>;
- reset-names = "lane0";
- };
-
- pciephy_1: lane@36000 {
- reg = <0x036000 0x130>,
- <0x036200 0x200>,
- <0x036400 0x1dc>;
- #phy-cells = <0>;
-
- clock-output-names = "pcie_1_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe1";
- resets = <&gcc GCC_PCIE_1_PHY_BCR>;
- reset-names = "lane1";
- };
-
- pciephy_2: lane@37000 {
- reg = <0x037000 0x130>,
- <0x037200 0x200>,
- <0x037400 0x1dc>;
- #phy-cells = <0>;
-
- clock-output-names = "pcie_2_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe2";
- resets = <&gcc GCC_PCIE_2_PHY_BCR>;
- reset-names = "lane2";
- };
- };
-
- phy@7410000 {
- compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x7410000 0x1c4>;
- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
-
- resets = <&gcc GCC_USB3_PHY_BCR>,
- <&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "phy", "common";
- status = "disabled";
-
- ssusb_phy_0: lane@7410200 {
- reg = <0x7410200 0x200>,
- <0x7410400 0x130>,
- <0x7410600 0x1a8>;
- #phy-cells = <0>;
-
- clock-output-names = "usb3_phy_pipe_clk_src";
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- };
- };
-
- hsusb_phy1: phy@7411000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7411000 0x180>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX1_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
-
- vdda-pll-supply = <&pm8994_l12>;
- vdda-phy-dpdm-supply = <&pm8994_l24>;
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
- nvmem-cells = <&qusb2p_hstx_trim>;
- status = "disabled";
- };
-
- hsusb_phy2: phy@7412000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7412000 0x180>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX2_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
-
- vdda-pll-supply = <&pm8994_l12>;
- vdda-phy-dpdm-supply = <&pm8994_l24>;
-
- resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
- nvmem-cells = <&qusb2s_hstx_trim>;
- status = "disabled";
- };
-
usb2: usb@76f8800 {
compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x76f8800 0x400>;
+ reg = <0x076f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1598,424 +1930,19 @@
dwc3@7600000 {
compatible = "snps,dwc3";
- reg = <0x7600000 0xcc00>;
+ reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
};
};
- usb3: usb@6af8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x6af8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
-
- assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <120000000>;
-
- power-domains = <&gcc USB30_GDSC>;
- status = "disabled";
-
- dwc3@6a00000 {
- compatible = "snps,dwc3";
- reg = <0x6a00000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy1>, <&ssusb_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
- };
- };
-
- vfe_smmu: iommu@da0000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xda0000 0x10000>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
- clocks = <&mmcc SMMU_VFE_AHB_CLK>,
- <&mmcc SMMU_VFE_AXI_CLK>;
- clock-names = "iface",
- "bus";
- #iommu-cells = <1>;
- };
-
- camss: camss@a00000 {
- compatible = "qcom,msm8996-camss";
- reg = <0xa34000 0x1000>,
- <0xa00030 0x4>,
- <0xa35000 0x1000>,
- <0xa00038 0x4>,
- <0xa36000 0x1000>,
- <0xa00040 0x4>,
- <0xa30000 0x100>,
- <0xa30400 0x100>,
- <0xa30800 0x100>,
- <0xa30c00 0x100>,
- <0xa31000 0x500>,
- <0xa00020 0x10>,
- <0xa10000 0x1000>,
- <0xa14000 0x1000>;
- reg-names = "csiphy0",
- "csiphy0_clk_mux",
- "csiphy1",
- "csiphy1_clk_mux",
- "csiphy2",
- "csiphy2_clk_mux",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
- "ispif",
- "csi_clk_mux",
- "vfe0",
- "vfe1";
- interrupts = <GIC_SPI 78 0>,
- <GIC_SPI 79 0>,
- <GIC_SPI 80 0>,
- <GIC_SPI 296 0>,
- <GIC_SPI 297 0>,
- <GIC_SPI 298 0>,
- <GIC_SPI 299 0>,
- <GIC_SPI 309 0>,
- <GIC_SPI 314 0>,
- <GIC_SPI 315 0>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csiphy2",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
- "ispif",
- "vfe0",
- "vfe1";
- power-domains = <&mmcc VFE0_GDSC>;
- clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc CAMSS_ISPIF_AHB_CLK>,
- <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI0_AHB_CLK>,
- <&mmcc CAMSS_CSI0_CLK>,
- <&mmcc CAMSS_CSI0PHY_CLK>,
- <&mmcc CAMSS_CSI0PIX_CLK>,
- <&mmcc CAMSS_CSI0RDI_CLK>,
- <&mmcc CAMSS_CSI1_AHB_CLK>,
- <&mmcc CAMSS_CSI1_CLK>,
- <&mmcc CAMSS_CSI1PHY_CLK>,
- <&mmcc CAMSS_CSI1PIX_CLK>,
- <&mmcc CAMSS_CSI1RDI_CLK>,
- <&mmcc CAMSS_CSI2_AHB_CLK>,
- <&mmcc CAMSS_CSI2_CLK>,
- <&mmcc CAMSS_CSI2PHY_CLK>,
- <&mmcc CAMSS_CSI2PIX_CLK>,
- <&mmcc CAMSS_CSI2RDI_CLK>,
- <&mmcc CAMSS_CSI3_AHB_CLK>,
- <&mmcc CAMSS_CSI3_CLK>,
- <&mmcc CAMSS_CSI3PHY_CLK>,
- <&mmcc CAMSS_CSI3PIX_CLK>,
- <&mmcc CAMSS_CSI3RDI_CLK>,
- <&mmcc CAMSS_AHB_CLK>,
- <&mmcc CAMSS_VFE0_CLK>,
- <&mmcc CAMSS_CSI_VFE0_CLK>,
- <&mmcc CAMSS_VFE0_AHB_CLK>,
- <&mmcc CAMSS_VFE0_STREAM_CLK>,
- <&mmcc CAMSS_VFE1_CLK>,
- <&mmcc CAMSS_CSI_VFE1_CLK>,
- <&mmcc CAMSS_VFE1_AHB_CLK>,
- <&mmcc CAMSS_VFE1_STREAM_CLK>,
- <&mmcc CAMSS_VFE_AHB_CLK>,
- <&mmcc CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csiphy2_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "csi2_ahb",
- "csi2",
- "csi2_phy",
- "csi2_pix",
- "csi2_rdi",
- "csi3_ahb",
- "csi3",
- "csi3_phy",
- "csi3_pix",
- "csi3_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe0_ahb",
- "vfe0_stream",
- "vfe1",
- "csi_vfe1",
- "vfe1_ahb",
- "vfe1_stream",
- "vfe_ahb",
- "vfe_axi";
- vdda-supply = <&pm8994_l2>;
- iommus = <&vfe_smmu 0>,
- <&vfe_smmu 1>,
- <&vfe_smmu 2>,
- <&vfe_smmu 3>;
- status = "disabled";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- adreno_smmu: iommu@b40000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xb40000 0x10000>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
-
- clocks = <&mmcc GPU_AHB_CLK>,
- <&gcc GCC_MMSS_BIMC_GFX_CLK>;
- clock-names = "iface", "bus";
-
- power-domains = <&mmcc GPU_GDSC>;
- };
-
- mdp_smmu: iommu@d00000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xd00000 0x10000>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
- clocks = <&mmcc SMMU_MDP_AHB_CLK>,
- <&mmcc SMMU_MDP_AXI_CLK>;
- clock-names = "iface", "bus";
-
- power-domains = <&mmcc MDSS_GDSC>;
- };
-
- lpass_q6_smmu: iommu@1600000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x1600000 0x20000>;
- #iommu-cells = <1>;
- power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
- <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
- clock-names = "iface", "bus";
- };
-
- agnoc@0 {
- power-domains = <&gcc AGGRE0_NOC_GDSC>;
- compatible = "simple-pm-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- pcie0: pcie@600000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- status = "disabled";
- power-domains = <&gcc PCIE0_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-
- reg = <0x00600000 0x2000>,
- <0x0c000000 0xf1d>,
- <0x0c000f20 0xa8>,
- <0x0c100000 0x100000>;
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_0>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
- <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
-
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
- pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
-
-
- vdda-supply = <&pm8994_l28>;
-
- linux,pci-domain = <0>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
-
- };
-
- pcie1: pcie@608000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- power-domains = <&gcc PCIE1_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-
- status = "disabled";
-
- reg = <0x00608000 0x2000>,
- <0x0d000000 0xf1d>,
- <0x0d000f20 0xa8>,
- <0x0d100000 0x100000>;
-
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_1>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
- <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
-
- interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
- pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
-
-
- vdda-supply = <&pm8994_l28>;
- linux,pci-domain = <1>;
-
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
- };
-
- pcie2: pcie@610000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- power-domains = <&gcc PCIE2_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- status = "disabled";
- reg = <0x00610000 0x2000>,
- <0x0e000000 0xf1d>,
- <0x0e000f20 0xa8>,
- <0x0e100000 0x100000>;
-
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_2>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
- <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
-
- device_type = "pci";
-
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
-
- vdda-supply = <&pm8994_l28>;
-
- linux,pci-domain = <2>;
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
- <&gcc GCC_PCIE_2_AUX_CLK>,
- <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
- };
- };
-
- slimbam:dma@9184000
- {
+ slimbam: dma@9184000 {
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
- reg = <0x9184000 0x32000>;
+ reg = <0x09184000 0x32000>;
num-channels = <31>;
interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
@@ -2025,7 +1952,7 @@
slim_msm: slim@91c0000 {
compatible = "qcom,slim-ngd-v1.5.0";
- reg = <0x91c0000 0x2C000>;
+ reg = <0x091c0000 0x2C000>;
reg-names = "ctrl";
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&slimbam 3>, <&slimbam 4>,
@@ -2060,433 +1987,418 @@
slim-ifc-dev = <&tasha_ifd>;
- vdd-buck-supply = <&pm8994_s4>;
- vdd-buck-sido-supply = <&pm8994_s4>;
- vdd-tx-supply = <&pm8994_s4>;
- vdd-rx-supply = <&pm8994_s4>;
- vdd-io-supply = <&pm8994_s4>;
-
#sound-dai-cells = <1>;
};
};
};
- gpu@b00000 {
- compatible = "qcom,adreno-530.2", "qcom,adreno";
- #stream-id-cells = <16>;
+ adsp_pil: remoteproc@9300000 {
+ compatible = "qcom,msm8996-adsp-pil";
+ reg = <0x09300000 0x80000>;
- reg = <0xb00000 0x3f000>;
- reg-names = "kgsl_3d0_reg_memory";
+ interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
- interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
- clocks = <&mmcc GPU_GX_GFX3D_CLK>,
- <&mmcc GPU_AHB_CLK>,
- <&mmcc GPU_GX_RBBMTIMER_CLK>,
- <&gcc GCC_BIMC_GFX_CLK>,
- <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+ memory-region = <&adsp_region>;
- clock-names = "core",
- "iface",
- "rbbmtimer",
- "mem",
- "mem_iface";
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
- power-domains = <&mmcc GPU_GDSC>;
- iommus = <&adreno_smmu 0>;
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
- nvmem-cells = <&gpu_speed_bin>;
- nvmem-cell-names = "speed_bin";
+ label = "lpass";
+ mboxes = <&apcs_glb 8>;
+ qcom,smd-edge = <1>;
+ qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ apr {
+ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- qcom,gpu-quirk-two-pass-use-wfi;
- qcom,gpu-quirk-fault-detect-mask;
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
- operating-points-v2 = <&gpu_opp_table>;
+ q6afe: q6afe {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ hdmi@1 {
+ reg = <1>;
+ };
+ };
+ };
- gpu_opp_table: opp-table {
- compatible ="operating-points-v2";
+ q6asm: q6asm {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #sound-dai-cells = <1>;
+ iommus = <&lpass_q6_smmu 1>;
+ };
+ };
- /*
- * 624Mhz and 560Mhz are only available on speed
- * bin (1 << 0). All the rest are available on
- * all bins of the hardware
- */
- opp-624000000 {
- opp-hz = /bits/ 64 <624000000>;
- opp-supported-hw = <0x01>;
- };
- opp-560000000 {
- opp-hz = /bits/ 64 <560000000>;
- opp-supported-hw = <0x01>;
- };
- opp-510000000 {
- opp-hz = /bits/ 64 <510000000>;
- opp-supported-hw = <0xFF>;
- };
- opp-401800000 {
- opp-hz = /bits/ 64 <401800000>;
- opp-supported-hw = <0xFF>;
- };
- opp-315000000 {
- opp-hz = /bits/ 64 <315000000>;
- opp-supported-hw = <0xFF>;
- };
- opp-214000000 {
- opp-hz = /bits/ 64 <214000000>;
- opp-supported-hw = <0xFF>;
- };
- opp-133000000 {
- opp-hz = /bits/ 64 <133000000>;
- opp-supported-hw = <0xFF>;
+ q6adm: q6adm {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
};
- };
- zap-shader {
- memory-region = <&zap_shader_region>;
};
};
- mdss: mdss@900000 {
- compatible = "qcom,mdss";
-
- reg = <0x900000 0x1000>,
- <0x9b0000 0x1040>,
- <0x9b8000 0x1040>;
- reg-names = "mdss_phys",
- "vbif_phys",
- "vbif_nrt_phys";
-
- power-domains = <&mmcc MDSS_GDSC>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
+ apcs_glb: mailbox@9820000 {
+ compatible = "qcom,msm8996-apcs-hmss-global";
+ reg = <0x09820000 0x1000>;
- clocks = <&mmcc MDSS_AHB_CLK>;
- clock-names = "iface";
+ #mbox-cells = <1>;
+ };
+ timer@9840000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x09840000 0x1000>;
+ clock-frequency = <19200000>;
- mdp: mdp@901000 {
- compatible = "qcom,mdp5";
- reg = <0x901000 0x90000>;
- reg-names = "mdp_phys";
+ frame@9850000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09850000 0x1000>,
+ <0x09860000 0x1000>;
+ };
- interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ frame@9870000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09870000 0x1000>;
+ status = "disabled";
+ };
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MDSS_MDP_CLK>,
- <&mmcc SMMU_MDP_AXI_CLK>,
- <&mmcc MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "iommu",
- "vsync";
+ frame@9880000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09880000 0x1000>;
+ status = "disabled";
+ };
- iommus = <&mdp_smmu 0>;
+ frame@9890000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09890000 0x1000>;
+ status = "disabled";
+ };
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ frame@98a0000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x098a0000 0x1000>;
+ status = "disabled";
+ };
- port@0 {
- reg = <0>;
- mdp5_intf3_out: endpoint {
- remote-endpoint = <&hdmi_in>;
- };
- };
- };
+ frame@98b0000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x098b0000 0x1000>;
+ status = "disabled";
};
- hdmi: hdmi-tx@9a0000 {
- compatible = "qcom,hdmi-tx-8996";
- reg = <0x009a0000 0x50c>,
- <0x00070000 0x6158>,
- <0x009e0000 0xfff>;
- reg-names = "core_physical",
- "qfprom_physical",
- "hdcp_physical";
+ frame@98c0000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x098c0000 0x1000>;
+ status = "disabled";
+ };
+ };
- interrupt-parent = <&mdss>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ saw3: syscon@9a10000 {
+ compatible = "syscon";
+ reg = <0x09a10000 0x1000>;
+ };
- clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_HDMI_CLK>,
- <&mmcc MDSS_HDMI_AHB_CLK>,
- <&mmcc MDSS_EXTPCLK_CLK>;
- clock-names =
- "mdp_core",
- "iface",
- "core",
- "alt_iface",
- "extp";
+ intc: interrupt-controller@9bc0000 {
+ compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x40000>;
+ reg = <0x09bc0000 0x10000>,
+ <0x09c00000 0x100000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
- phys = <&hdmi_phy>;
- phy-names = "hdmi_phy";
- #sound-dai-cells = <1>;
+ sound: sound {
+ };
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- port@0 {
- reg = <0>;
- hdmi_in: endpoint {
- remote-endpoint = <&mdp5_intf3_out>;
- };
- };
- };
- };
+ thermal-sensors = <&tsens0 3>;
- hdmi_phy: hdmi-phy@9a0600 {
- #phy-cells = <0>;
- compatible = "qcom,hdmi-phy-8996";
- reg = <0x9a0600 0x1c4>,
- <0x9a0a00 0x124>,
- <0x9a0c00 0x124>,
- <0x9a0e00 0x124>,
- <0x9a1000 0x124>,
- <0x9a1200 0x0c8>;
- reg-names = "hdmi_pll",
- "hdmi_tx_l0",
- "hdmi_tx_l1",
- "hdmi_tx_l2",
- "hdmi_tx_l3",
- "hdmi_phy";
+ trips {
+ cpu0_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&gcc GCC_HDMI_CLKREF_CLK>;
- clock-names = "iface",
- "ref";
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
- venus_smmu: arm,smmu-venus@d40000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xd40000 0x20000>;
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
- clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
- <&mmcc SMMU_VIDEO_AXI_CLK>;
- clock-names = "iface", "bus";
- #iommu-cells = <1>;
- status = "okay";
- };
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- video-codec@c00000 {
- compatible = "qcom,msm8996-venus";
- reg = <0x00c00000 0xff000>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc VENUS_GDSC>;
- clocks = <&mmcc VIDEO_CORE_CLK>,
- <&mmcc VIDEO_AHB_CLK>,
- <&mmcc VIDEO_AXI_CLK>,
- <&mmcc VIDEO_MAXI_CLK>;
- clock-names = "core", "iface", "bus", "mbus";
- iommus = <&venus_smmu 0x00>,
- <&venus_smmu 0x01>,
- <&venus_smmu 0x0a>,
- <&venus_smmu 0x07>,
- <&venus_smmu 0x0e>,
- <&venus_smmu 0x0f>,
- <&venus_smmu 0x08>,
- <&venus_smmu 0x09>,
- <&venus_smmu 0x0b>,
- <&venus_smmu 0x0c>,
- <&venus_smmu 0x0d>,
- <&venus_smmu 0x10>,
- <&venus_smmu 0x11>,
- <&venus_smmu 0x21>,
- <&venus_smmu 0x28>,
- <&venus_smmu 0x29>,
- <&venus_smmu 0x2b>,
- <&venus_smmu 0x2c>,
- <&venus_smmu 0x2d>,
- <&venus_smmu 0x31>;
- memory-region = <&venus_region>;
- status = "okay";
+ thermal-sensors = <&tsens0 5>;
- video-decoder {
- compatible = "venus-decoder";
- clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
- clock-names = "core";
- power-domains = <&mmcc VENUS_CORE0_GDSC>;
- };
+ trips {
+ cpu1_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- video-encoder {
- compatible = "venus-encoder";
- clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
- clock-names = "core";
- power-domains = <&mmcc VENUS_CORE1_GDSC>;
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
- };
-
- sound: sound {
- };
-
- adsp-pil {
- compatible = "qcom,msm8996-adsp-pil";
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- clocks = <&xo_board>;
- clock-names = "xo";
+ thermal-sensors = <&tsens0 8>;
- memory-region = <&adsp_region>;
+ trips {
+ cpu2_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- label = "lpass";
- mboxes = <&apcs_glb 8>;
- qcom,smd-edge = <1>;
- qcom,remote-pid = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- apr {
- power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
- compatible = "qcom,apr-v2";
- qcom,smd-channels = "apr_audio_svc";
- qcom,apr-domain = <APR_DOMAIN_ADSP>;
- #address-cells = <1>;
- #size-cells = <0>;
+ thermal-sensors = <&tsens0 10>;
- q6core {
- reg = <APR_SVC_ADSP_CORE>;
- compatible = "qcom,q6core";
- };
-
- q6afe: q6afe {
- compatible = "qcom,q6afe";
- reg = <APR_SVC_AFE>;
- q6afedai: dais {
- compatible = "qcom,q6afe-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- hdmi@1 {
- reg = <1>;
- };
- };
+ trips {
+ cpu3_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
};
- q6asm: q6asm {
- compatible = "qcom,q6asm";
- reg = <APR_SVC_ASM>;
- q6asmdai: dais {
- compatible = "qcom,q6asm-dais";
- #sound-dai-cells = <1>;
- iommus = <&lpass_q6_smmu 1>;
- };
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
};
+ };
+ };
- q6adm: q6adm {
- compatible = "qcom,q6adm";
- reg = <APR_SVC_ADM>;
- q6routing: routing {
- compatible = "qcom,q6adm-routing";
- #sound-dai-cells = <0>;
- };
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
};
};
-
};
- };
- adsp-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <443>, <429>;
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens1 7>;
- mboxes = <&apcs_glb 10>;
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <2>;
+ m4m-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- adsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ m4m_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- adsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
+ l3-or-venus-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ l3_or_venus_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- };
- modem-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
+ cluster0-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens0 7>;
- mboxes = <&apcs_glb 14>;
+ trips {
+ cluster0_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- modem_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- modem_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- };
- smp2p-slpi {
- compatible = "qcom,smp2p";
- qcom,smem = <481>, <430>;
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens1 2>;
- mboxes = <&apcs_glb 26>;
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <3>;
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- slpi_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- slpi_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ modemtx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
};
#include "msm8996-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 6138b58db6d2..6ab830d01867 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -74,6 +74,23 @@
cpu-idle-states = <&BIG_CPU_SLEEP_1>;
};
+&pm8005_lsid1 {
+ pm8005-regulators {
+ compatible = "qcom,pm8005-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+
+ pm8005_s1: s1 { /* VDD_GFX supply */
+ regulator-min-microvolt = <524000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-enable-ramp-delay = <500>;
+
+ /* hack until we rig up the gpu consumer */
+ regulator-always-on;
+ };
+ };
+};
+
&qusb2phy {
status = "okay";
@@ -292,3 +309,35 @@
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&blsp1_uart3_on {
+ rx {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-up on 45 (RX). This is needed to
+ * avoid garbage data when the TX pin of the Bluetooth
+ * module is in tri-state (module powered off or not
+ * driving the signal yet).
+ */
+ bias-pull-up;
+ };
+
+ cts {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-down on 47 (CTS) to match the pull
+ * of the Bluetooth module.
+ */
+ bias-pull-down;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 5f101a20a20a..0e0b9bc12945 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -9,6 +9,7 @@
/ {
aliases {
serial0 = &blsp2_uart1;
+ serial1 = &blsp1_uart3;
};
chosen {
@@ -311,6 +312,14 @@
};
};
+&remoteproc_adsp {
+ status = "okay";
+};
+
+&remoteproc_slpi {
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
};
@@ -364,3 +373,35 @@
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&blsp1_uart3_on {
+ rx {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-up on 45 (RX). This is needed to
+ * avoid garbage data when the TX pin of the Bluetooth
+ * module is in tri-state (module powered off or not
+ * driving the signal yet).
+ */
+ bias-pull-up;
+ };
+
+ cts {
+ /delete-property/ bias-disable;
+ /*
+ * Configure a pull-down on 47 (CTS) to match the pull
+ * of the Bluetooth module.
+ */
+ bias-pull-down;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
index e32d3ab395ea..7c222cbf19d9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
@@ -77,13 +77,30 @@
};
blsp1_uart3_on: blsp1_uart3_on {
- mux {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ tx {
+ pins = "gpio45";
function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
};
- config {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ rx {
+ pins = "gpio46";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cts {
+ pins = "gpio47";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rfr {
+ pins = "gpio48";
+ function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index fc7838ea9a01..91f7f2d07597 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
@@ -28,8 +29,13 @@
#size-cells = <2>;
ranges;
- memory@85800000 {
- reg = <0x0 0x85800000 0x0 0x800000>;
+ hyp_mem: memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x600000>;
+ no-map;
+ };
+
+ xbl_mem: memory@85e00000 {
+ reg = <0x0 0x85e00000 0x0 0x100000>;
no-map;
};
@@ -38,21 +44,69 @@
no-map;
};
- memory@86200000 {
+ tz_mem: memory@86200000 {
reg = <0x0 0x86200000 0x0 0x2d00000>;
no-map;
};
- rmtfs {
+ rmtfs_mem: memory@88f00000 {
compatible = "qcom,rmtfs-mem";
-
- size = <0x0 0x200000>;
- alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ reg = <0x0 0x88f00000 0x0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <15>;
};
+
+ spss_mem: memory@8ab00000 {
+ reg = <0x0 0x8ab00000 0x0 0x700000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8b200000 {
+ reg = <0x0 0x8b200000 0x0 0x1a00000>;
+ no-map;
+ };
+
+ mpss_mem: memory@8cc00000 {
+ reg = <0x0 0x8cc00000 0x0 0x7000000>;
+ no-map;
+ };
+
+ venus_mem: memory@93c00000 {
+ reg = <0x0 0x93c00000 0x0 0x500000>;
+ no-map;
+ };
+
+ mba_mem: memory@94100000 {
+ reg = <0x0 0x94100000 0x0 0x200000>;
+ no-map;
+ };
+
+ slpi_mem: memory@94300000 {
+ reg = <0x0 0x94300000 0x0 0xf00000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@95200000 {
+ reg = <0x0 0x95200000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@95210000 {
+ reg = <0x0 0x95210000 0x0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@95600000 {
+ reg = <0x0 0x95600000 0x0 0x100000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@95700000 {
+ reg = <0x0 0x95700000 0x0 0x100000>;
+ no-map;
+ };
};
clocks {
@@ -817,8 +871,9 @@
reg = <0x010ab000 0x1000>, /* TM */
<0x010aa000 0x1000>; /* SROT */
#qcom,sensors = <14>;
- interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -827,8 +882,9 @@
reg = <0x010ae000 0x1000>, /* TM */
<0x010ad000 0x1000>; /* SROT */
#qcom,sensors = <8>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -847,6 +903,25 @@
<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
};
+ anoc2_smmu: iommu@16c0000 {
+ compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+ reg = <0x016c0000 0x40000>;
+ #iommu-cells = <1>;
+
+ #global-interrupts = <0>;
+ interrupts =
+ <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
+ };
+
pcie0: pci@1c00000 {
compatible = "qcom,pcie-msm8996";
reg = <0x01c00000 0x2000>,
@@ -987,7 +1062,7 @@
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
- reg = <0x01f40000 0x20000>;
+ reg = <0x01f40000 0x40000>;
};
tlmm: pinctrl@3400000 {
@@ -1000,6 +1075,110 @@
#interrupt-cells = <0x2>;
};
+ remoteproc_mss: remoteproc@4080000 {
+ compatible = "qcom,msm8998-mss-pil";
+ reg = <0x04080000 0x100>, <0x04180000 0x20>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended =
+ <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+ <&rpmcc RPM_SMD_QDSS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "bus", "mem", "gpll0_mss",
+ "snoc_axi", "mnoc_axi", "qdss", "xo";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+ power-domains = <&rpmpd MSM8998_VDDCX>,
+ <&rpmpd MSM8998_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ glink-edge {
+ interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 15>;
+ };
+ };
+
+ gpucc: clock-controller@5065000 {
+ compatible = "qcom,msm8998-gpucc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x05065000 0x9000>;
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GPLL0_OUT_MAIN>;
+ clock-names = "xo",
+ "gpll0";
+ };
+
+ remoteproc_slpi: remoteproc@5800000 {
+ compatible = "qcom,msm8998-slpi-pas";
+ reg = <0x05800000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ px-supply = <&vreg_lvs2a_1p8>;
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ clock-names = "xo", "aggre2";
+
+ memory-region = <&slpi_mem>;
+
+ qcom,smem-states = <&slpi_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ power-domains = <&rpmpd MSM8998_SSCCX>;
+ power-domain-names = "ssc_cx";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ label = "dsps";
+ qcom,remote-pid = <3>;
+ mboxes = <&apcs_glb 27>;
+ };
+ };
+
stm: stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x06002000 0x1000>,
@@ -1792,6 +1971,39 @@
#size-cells = <0>;
};
+ remoteproc_adsp: remoteproc@17300000 {
+ compatible = "qcom,msm8998-adsp-pas";
+ reg = <0x17300000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ power-domains = <&rpmpd MSM8998_VDDCX>;
+ power-domain-names = "cx";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 9>;
+ };
+ };
+
apcs_glb: mailbox@17911000 {
compatible = "qcom,msm8998-apcs-hmss-global";
reg = <0x17911000 0x1000>;
@@ -1870,6 +2082,32 @@
redistributor-stride = <0x0 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ wifi: wifi@18800000 {
+ compatible = "qcom,wcn3990-wifi";
+ status = "disabled";
+ reg = <0x18800000 0x800000>;
+ reg-names = "membase";
+ memory-region = <&wlan_msa_mem>;
+ clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+ clock-names = "cxo_ref_clk_pin";
+ interrupts =
+ <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&anoc2_smmu 0x1900>,
+ <&anoc2_smmu 0x1901>;
+ qcom,snoc-host-cap-8bit-quirk;
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644
index 000000000000..23534639f455
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+&spmi_bus {
+ pm6150_lsid0: pmic@0 {
+ compatible = "qcom,pm6150", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm6150_pon: pon@800 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ pm6150_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm6150_adc: adc@3100 {
+ compatible = "qcom,spmi-adc5";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ adc-chan@6 {
+ reg = <ADC5_DIE_TEMP>;
+ label = "die_temp";
+ };
+ };
+
+ pm6150_gpio: gpios@c000 {
+ compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ gpio-ranges = <&pm6150_gpio 0 0 10>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pm6150_lsid1: pmic@1 {
+ compatible = "qcom,pm6150", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644
index 000000000000..f84027b505d1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pm6150l_lsid4: pmic@4 {
+ compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm6150l_gpio: gpios@c000 {
+ compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ gpio-ranges = <&pm6150l_gpio 0 0 12>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pm6150l_lsid5: pmic@5 {
+ compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+ reg = <0x5 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
index 297b57bfa87a..0abd1abe12fc 100644
--- a/arch/arm64/boot/dts/qcom/pm8004.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -4,17 +4,23 @@
&spmi_bus {
- pmic@4 {
+ pm8004_lsid4: pmic@4 {
compatible = "qcom,pm8004", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
- pmic@5 {
+ pm8004_lsid5: pmic@5 {
compatible = "qcom,pm8004", "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
+
+ pm8004_spmi_regulators: regulators {
+ compatible = "qcom,pm8004-regulators";
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 9dd2df1cbf47..0bcdf0471107 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -111,6 +111,12 @@
#address-cells = <1>;
#size-cells = <0>;
+ pm8916_vib: vibrator@c000 {
+ compatible = "qcom,pm8916-vib";
+ reg = <0xc000>;
+ status = "disabled";
+ };
+
wcd_codec: codec@f000 {
compatible = "qcom,pm8916-wcd-analog-codec";
reg = <0xf000 0x200>;
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 76b5a3e6a2b5..7e4f777746cb 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -85,5 +85,9 @@
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8994_spmi_regulators: regulators {
+ compatible = "qcom,pm8994-regulators";
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 501a7330dbc8..522d3ef72df5 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -73,6 +73,7 @@
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd_apc";
+ regulator-initial-mode = <1>;
regulator-min-microvolt = <1048000>;
regulator-max-microvolt = <1384000>;
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index f5f0c4c9cb16..4ee1e3d5f123 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -42,6 +42,10 @@
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
+ clocks = <&apcs_glb>;
+ operating-points-v2 = <&cpu_opp_table>;
+ power-domains = <&cpr>;
+ power-domain-names = "cpr";
};
CPU1: cpu@101 {
@@ -52,6 +56,10 @@
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
+ clocks = <&apcs_glb>;
+ operating-points-v2 = <&cpu_opp_table>;
+ power-domains = <&cpr>;
+ power-domain-names = "cpr";
};
CPU2: cpu@102 {
@@ -62,6 +70,10 @@
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
+ clocks = <&apcs_glb>;
+ operating-points-v2 = <&cpu_opp_table>;
+ power-domains = <&cpr>;
+ power-domain-names = "cpr";
};
CPU3: cpu@103 {
@@ -72,6 +84,10 @@
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
+ clocks = <&apcs_glb>;
+ operating-points-v2 = <&cpu_opp_table>;
+ power-domains = <&cpr>;
+ power-domain-names = "cpr";
};
L2_0: l2-cache {
@@ -94,6 +110,41 @@
};
};
+ cpu_opp_table: cpu-opp-table {
+ compatible = "operating-points-v2-kryo-cpu";
+ opp-shared;
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ required-opps = <&cpr_opp1>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ required-opps = <&cpr_opp2>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ required-opps = <&cpr_opp3>;
+ };
+ };
+
+ cpr_opp_table: cpr-opp-table {
+ compatible = "operating-points-v2-qcom-level";
+
+ cpr_opp1: opp1 {
+ opp-level = <1>;
+ qcom,opp-fuse-level = <1>;
+ };
+ cpr_opp2: opp2 {
+ opp-level = <2>;
+ qcom,opp-fuse-level = <2>;
+ };
+ cpr_opp3: opp3 {
+ opp-level = <3>;
+ qcom,opp-fuse-level = <3>;
+ };
+ };
+
firmware {
scm: scm {
compatible = "qcom,scm-qcs404", "qcom,scm";
@@ -280,6 +331,62 @@
tsens_caldata: caldata@d0 {
reg = <0x1f8 0x14>;
};
+ cpr_efuse_speedbin: speedbin@13c {
+ reg = <0x13c 0x4>;
+ bits = <2 3>;
+ };
+ cpr_efuse_quot_offset1: qoffset1@231 {
+ reg = <0x231 0x4>;
+ bits = <4 7>;
+ };
+ cpr_efuse_quot_offset2: qoffset2@232 {
+ reg = <0x232 0x4>;
+ bits = <3 7>;
+ };
+ cpr_efuse_quot_offset3: qoffset3@233 {
+ reg = <0x233 0x4>;
+ bits = <2 7>;
+ };
+ cpr_efuse_init_voltage1: ivoltage1@229 {
+ reg = <0x229 0x4>;
+ bits = <4 6>;
+ };
+ cpr_efuse_init_voltage2: ivoltage2@22a {
+ reg = <0x22a 0x4>;
+ bits = <2 6>;
+ };
+ cpr_efuse_init_voltage3: ivoltage3@22b {
+ reg = <0x22b 0x4>;
+ bits = <0 6>;
+ };
+ cpr_efuse_quot1: quot1@22b {
+ reg = <0x22b 0x4>;
+ bits = <6 12>;
+ };
+ cpr_efuse_quot2: quot2@22d {
+ reg = <0x22d 0x4>;
+ bits = <2 12>;
+ };
+ cpr_efuse_quot3: quot3@230 {
+ reg = <0x230 0x4>;
+ bits = <0 12>;
+ };
+ cpr_efuse_ring1: ring1@228 {
+ reg = <0x228 0x4>;
+ bits = <0 3>;
+ };
+ cpr_efuse_ring2: ring2@228 {
+ reg = <0x228 0x4>;
+ bits = <4 3>;
+ };
+ cpr_efuse_ring3: ring3@229 {
+ reg = <0x229 0x4>;
+ bits = <0 3>;
+ };
+ cpr_efuse_revision: revision@218 {
+ reg = <0x218 0x4>;
+ bits = <3 3>;
+ };
};
rng: rng@e3000 {
@@ -902,14 +1009,65 @@
compatible = "qcom,qcs404-apcs-apps-global", "syscon";
reg = <0x0b011000 0x1000>;
#mbox-cells = <1>;
+ clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+ clock-names = "pll", "aux";
+ #clock-cells = <0>;
+ };
+
+ apcs_hfpll: clock-controller@b016000 {
+ compatible = "qcom,hfpll";
+ reg = <0x0b016000 0x30>;
+ #clock-cells = <0>;
+ clock-output-names = "apcs_hfpll";
+ clocks = <&xo_board>;
+ clock-names = "xo";
};
watchdog@b017000 {
- compatible = "qcom,kpss-wdt";
+ compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
reg = <0x0b017000 0x1000>;
clocks = <&sleep_clk>;
};
+ cpr: power-controller@b018000 {
+ compatible = "qcom,qcs404-cpr", "qcom,cpr";
+ reg = <0x0b018000 0x1000>;
+ interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xo_board>;
+ clock-names = "ref";
+ vdd-apc-supply = <&pms405_s3>;
+ #power-domain-cells = <0>;
+ operating-points-v2 = <&cpr_opp_table>;
+ acc-syscon = <&tcsr>;
+
+ nvmem-cells = <&cpr_efuse_quot_offset1>,
+ <&cpr_efuse_quot_offset2>,
+ <&cpr_efuse_quot_offset3>,
+ <&cpr_efuse_init_voltage1>,
+ <&cpr_efuse_init_voltage2>,
+ <&cpr_efuse_init_voltage3>,
+ <&cpr_efuse_quot1>,
+ <&cpr_efuse_quot2>,
+ <&cpr_efuse_quot3>,
+ <&cpr_efuse_ring1>,
+ <&cpr_efuse_ring2>,
+ <&cpr_efuse_ring3>,
+ <&cpr_efuse_revision>;
+ nvmem-cell-names = "cpr_quotient_offset1",
+ "cpr_quotient_offset2",
+ "cpr_quotient_offset3",
+ "cpr_init_voltage1",
+ "cpr_init_voltage2",
+ "cpr_init_voltage3",
+ "cpr_quotient1",
+ "cpr_quotient2",
+ "cpr_quotient3",
+ "cpr_ring_osc1",
+ "cpr_ring_osc2",
+ "cpr_ring_osc3",
+ "cpr_fuse_revision";
+ };
+
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
new file mode 100644
index 000000000000..388f50ad4fde
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 IDP board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7180.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SC7180 IDP";
+ compatible = "qcom,sc7180-idp", "qcom,sc7180";
+
+ aliases {
+ hsuart0 = &uart3;
+ serial0 = &uart8;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&apps_rsc {
+ pm6150-rpmh-regulators {
+ compatible = "qcom,pm6150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s1a_1p1: smps1 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_s4a_1p0: smps4 {
+ regulator-min-microvolt = <824000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s5a_2p0: smps5 {
+ regulator-min-microvolt = <1744000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_l1a_1p2: ldo1 {
+ regulator-min-microvolt = <1178000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l2a_1p0: ldo2 {
+ regulator-min-microvolt = <944000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <968000>;
+ regulator-max-microvolt = <1064000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l4a_0p8: ldo4 {
+ regulator-min-microvolt = <824000>;
+ regulator-max-microvolt = <928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l5a_2p7: ldo5 {
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l6a_0p6: ldo6 {
+ regulator-min-microvolt = <568000>;
+ regulator-max-microvolt = <648000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l9a_0p6: ldo9 {
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l11a_1p8: ldo11 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l13a_1p8: ldo13 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1728000>;
+ regulator-max-microvolt = <1832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-min-microvolt = <2920000>;
+ regulator-max-microvolt = <3232000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l18a_2p8: ldo18 {
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l19a_2p9: ldo19 {
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+ };
+
+ pm6150l-rpmh-regulators {
+ compatible = "qcom,pm6150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_s8c_1p3: smps8 {
+ regulator-min-microvolt = <1120000>;
+ regulator-max-microvolt = <1408000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <1984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l2c_1p3: ldo2 {
+ regulator-min-microvolt = <1168000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l3c_1p2: ldo3 {
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart8 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+ vdd-supply = <&vreg_l4a_0p8>;
+ vdda-pll-supply = <&vreg_l11a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l4a_0p8>;
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&qspi_clk {
+ pinconf {
+ pins = "gpio63";
+ bias-disable;
+ };
+};
+
+&qspi_cs0 {
+ pinconf {
+ pins = "gpio68";
+ bias-disable;
+ };
+};
+
+&qspi_data01 {
+ pinconf {
+ pins = "gpio64", "gpio65";
+
+ /* High-Z when no transfers; nice to park the lines */
+ bias-pull-up;
+ };
+};
+
+&qup_i2c2_default {
+ pinconf {
+ pins = "gpio15", "gpio16";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c4_default {
+ pinconf {
+ pins = "gpio115", "gpio116";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c7_default {
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c9_default {
+ pinconf {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_uart3_default {
+ pinconf-cts {
+ /*
+ * Configure a pull-down on 38 (CTS) to match the pull of
+ * the Bluetooth module.
+ */
+ pins = "gpio38";
+ bias-pull-down;
+ output-high;
+ };
+
+ pinconf-rts {
+ /* We'll drive 39 (RTS), so no pull */
+ pins = "gpio39";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-tx {
+ /* We'll drive 40 (TX), so no pull */
+ pins = "gpio40";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ pinconf-rx {
+ /*
+ * Configure a pull-up on 41 (RX). This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module is
+ * in tri-state (module powered off or not driving the
+ * signal yet).
+ */
+ pins = "gpio41";
+ bias-pull-up;
+ };
+};
+
+&qup_uart8_default {
+ pinconf-tx {
+ pins = "gpio44";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio45";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&qup_spi0_default {
+ pinconf {
+ pins = "gpio34", "gpio35", "gpio36", "gpio37";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi6_default {
+ pinconf {
+ pins = "gpio59", "gpio60", "gpio61", "gpio62";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi10_default {
+ pinconf {
+ pins = "gpio86", "gpio87", "gpio88", "gpio89";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
new file mode 100644
index 000000000000..8011c5fe2a31
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -0,0 +1,2187 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 SoC device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sc7180.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi3 = &spi3;
+ spi5 = &spi5;
+ spi6 = &spi6;
+ spi8 = &spi8;
+ spi10 = &spi10;
+ spi11 = &spi11;
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <38400000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32764>;
+ #clock-cells = <0>;
+ };
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ aop_cmd_db_mem: memory@80820000 {
+ reg = <0x0 0x80820000 0x0 0x20000>;
+ compatible = "qcom,cmd-db";
+ };
+
+ smem_mem: memory@80900000 {
+ reg = <0x0 0x80900000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-sc7180", "qcom,scm";
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 6>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sc7180";
+ reg = <0 0x00100000 0 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ qfprom@784000 {
+ compatible = "qcom,qfprom";
+ reg = <0 0x00784000 0 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2p_hstx_trim: hstx-trim-primary@25b {
+ reg = <0x25b 0x1>;
+ bits = <1 3>;
+ };
+ };
+
+ qupv3_id_0: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@880000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart1: serial@884000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart2: serial@888000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart3: serial@88c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@890000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart5: serial@894000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ qupv3_id_1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c6: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi6_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart6: serial@a80000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart6_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart7: serial@a84000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart7_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi8: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi8_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart8: serial@a88000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart8_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart9: serial@a8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart9_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi10: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi10_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart10: serial@a90000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart10_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi11: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi11_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart11: serial@a94000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00a94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart11_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0 0x01f40000 0 0x40000>;
+ };
+
+ tlmm: pinctrl@3500000 {
+ compatible = "qcom,sc7180-pinctrl";
+ reg = <0 0x03500000 0 0x300000>,
+ <0 0x03900000 0 0x300000>,
+ <0 0x03d00000 0 0x300000>;
+ reg-names = "west", "north", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 120>;
+ wakeup-parent = <&pdc>;
+
+ qspi_clk: qspi-clk {
+ pinmux {
+ pins = "gpio63";
+ function = "qspi_clk";
+ };
+ };
+
+ qspi_cs0: qspi-cs0 {
+ pinmux {
+ pins = "gpio68";
+ function = "qspi_cs";
+ };
+ };
+
+ qspi_cs1: qspi-cs1 {
+ pinmux {
+ pins = "gpio72";
+ function = "qspi_cs";
+ };
+ };
+
+ qspi_data01: qspi-data01 {
+ pinmux-data {
+ pins = "gpio64", "gpio65";
+ function = "qspi_data";
+ };
+ };
+
+ qspi_data12: qspi-data12 {
+ pinmux-data {
+ pins = "gpio66", "gpio67";
+ function = "qspi_data";
+ };
+ };
+
+ qup_i2c0_default: qup-i2c0-default {
+ pinmux {
+ pins = "gpio34", "gpio35";
+ function = "qup00";
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-default {
+ pinmux {
+ pins = "gpio0", "gpio1";
+ function = "qup01";
+ };
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ pinmux {
+ pins = "gpio15", "gpio16";
+ function = "qup02_i2c";
+ };
+ };
+
+ qup_i2c3_default: qup-i2c3-default {
+ pinmux {
+ pins = "gpio38", "gpio39";
+ function = "qup03";
+ };
+ };
+
+ qup_i2c4_default: qup-i2c4-default {
+ pinmux {
+ pins = "gpio115", "gpio116";
+ function = "qup04_i2c";
+ };
+ };
+
+ qup_i2c5_default: qup-i2c5-default {
+ pinmux {
+ pins = "gpio25", "gpio26";
+ function = "qup05";
+ };
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ pinmux {
+ pins = "gpio59", "gpio60";
+ function = "qup10";
+ };
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ pinmux {
+ pins = "gpio6", "gpio7";
+ function = "qup11_i2c";
+ };
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ pinmux {
+ pins = "gpio42", "gpio43";
+ function = "qup12";
+ };
+ };
+
+ qup_i2c9_default: qup-i2c9-default {
+ pinmux {
+ pins = "gpio46", "gpio47";
+ function = "qup13_i2c";
+ };
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ pinmux {
+ pins = "gpio86", "gpio87";
+ function = "qup14";
+ };
+ };
+
+ qup_i2c11_default: qup-i2c11-default {
+ pinmux {
+ pins = "gpio53", "gpio54";
+ function = "qup15";
+ };
+ };
+
+ qup_spi0_default: qup-spi0-default {
+ pinmux {
+ pins = "gpio34", "gpio35",
+ "gpio36", "gpio37";
+ function = "qup00";
+ };
+ };
+
+ qup_spi1_default: qup-spi1-default {
+ pinmux {
+ pins = "gpio0", "gpio1",
+ "gpio2", "gpio3";
+ function = "qup01";
+ };
+ };
+
+ qup_spi3_default: qup-spi3-default {
+ pinmux {
+ pins = "gpio38", "gpio39",
+ "gpio40", "gpio41";
+ function = "qup03";
+ };
+ };
+
+ qup_spi5_default: qup-spi5-default {
+ pinmux {
+ pins = "gpio25", "gpio26",
+ "gpio27", "gpio28";
+ function = "qup05";
+ };
+ };
+
+ qup_spi6_default: qup-spi6-default {
+ pinmux {
+ pins = "gpio59", "gpio60",
+ "gpio61", "gpio62";
+ function = "qup10";
+ };
+ };
+
+ qup_spi8_default: qup-spi8-default {
+ pinmux {
+ pins = "gpio42", "gpio43",
+ "gpio44", "gpio45";
+ function = "qup12";
+ };
+ };
+
+ qup_spi10_default: qup-spi10-default {
+ pinmux {
+ pins = "gpio86", "gpio87",
+ "gpio88", "gpio89";
+ function = "qup14";
+ };
+ };
+
+ qup_spi11_default: qup-spi11-default {
+ pinmux {
+ pins = "gpio53", "gpio54",
+ "gpio55", "gpio56";
+ function = "qup15";
+ };
+ };
+
+ qup_uart0_default: qup-uart0-default {
+ pinmux {
+ pins = "gpio34", "gpio35",
+ "gpio36", "gpio37";
+ function = "qup00";
+ };
+ };
+
+ qup_uart1_default: qup-uart1-default {
+ pinmux {
+ pins = "gpio0", "gpio1",
+ "gpio2", "gpio3";
+ function = "qup01";
+ };
+ };
+
+ qup_uart2_default: qup-uart2-default {
+ pinmux {
+ pins = "gpio15", "gpio16";
+ function = "qup02_uart";
+ };
+ };
+
+ qup_uart3_default: qup-uart3-default {
+ pinmux {
+ pins = "gpio38", "gpio39",
+ "gpio40", "gpio41";
+ function = "qup03";
+ };
+ };
+
+ qup_uart4_default: qup-uart4-default {
+ pinmux {
+ pins = "gpio115", "gpio116";
+ function = "qup04_uart";
+ };
+ };
+
+ qup_uart5_default: qup-uart5-default {
+ pinmux {
+ pins = "gpio25", "gpio26",
+ "gpio27", "gpio28";
+ function = "qup05";
+ };
+ };
+
+ qup_uart6_default: qup-uart6-default {
+ pinmux {
+ pins = "gpio59", "gpio60",
+ "gpio61", "gpio62";
+ function = "qup10";
+ };
+ };
+
+ qup_uart7_default: qup-uart7-default {
+ pinmux {
+ pins = "gpio6", "gpio7";
+ function = "qup11_uart";
+ };
+ };
+
+ qup_uart8_default: qup-uart8-default {
+ pinmux {
+ pins = "gpio44", "gpio45";
+ function = "qup12";
+ };
+ };
+
+ qup_uart9_default: qup-uart9-default {
+ pinmux {
+ pins = "gpio46", "gpio47";
+ function = "qup13_uart";
+ };
+ };
+
+ qup_uart10_default: qup-uart10-default {
+ pinmux {
+ pins = "gpio86", "gpio87",
+ "gpio88", "gpio89";
+ function = "qup14";
+ };
+ };
+
+ qup_uart11_default: qup-uart11-default {
+ pinmux {
+ pins = "gpio53", "gpio54",
+ "gpio55", "gpio56";
+ function = "qup15";
+ };
+ };
+ };
+
+ qspi: spi@88dc000 {
+ compatible = "qcom,qspi-v1";
+ reg = <0 0x088dc000 0 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <&gcc GCC_QSPI_CORE_CLK>;
+ clock-names = "iface", "core";
+ status = "disabled";
+ };
+
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sc7180-qusb2-phy";
+ reg = <0 0x088e3000 0 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ };
+
+ usb_1_qmpphy: phy-wrapper@88e9000 {
+ compatible = "qcom,sc7180-qmp-usb3-phy";
+ reg = <0 0x088e9000 0 0x18c>,
+ <0 0x088e8000 0 0x38>;
+ reg-names = "reg-base", "dp_com";
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ usb_1_ssphy: phy@88e9200 {
+ reg = <0 0x088e9200 0 0x128>,
+ <0 0x088e9400 0 0x200>,
+ <0 0x088e9c00 0 0x218>,
+ <0 0x088e9600 0 0x128>,
+ <0 0x088e9800 0 0x200>,
+ <0 0x088e9a00 0 0x18>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
+ system-cache-controller@9200000 {
+ compatible = "qcom,sc7180-llcc";
+ reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
+ reg-names = "llcc_base", "llcc_broadcast_base";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+ status = "disabled";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ usb_1_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xe000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x540 0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sc7180-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>;
+ qcom,pdc-ranges = <0 480 15>, <17 497 98>,
+ <119 634 4>, <124 639 1>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ pdc_reset: reset-controller@b2e0000 {
+ compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
+ reg = <0 0x0b2e0000 0 0x20000>;
+ #reset-cells = <1>;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <15>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow","critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <10>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow","critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
+ reg = <0 0x0c2a0000 0 0x31000>;
+ #reset-cells = <1>;
+ };
+
+ aoss_qmp: qmp@c300000 {
+ compatible = "qcom,sc7180-aoss-qmp";
+ reg = <0 0x0c300000 0 0x100000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 0>;
+
+ #clock-cells = <0>;
+ #power-domain-cells = <1>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0 0x0c440000 0 0x1100>,
+ <0 0x0c600000 0 0x2000000>,
+ <0 0x0e600000 0 0x100000>,
+ <0 0x0e700000 0 0xa0000>,
+ <0 0x0c40a000 0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0 0x17a00000 0 0x10000>, /* GICD */
+ <0 0x17a60000 0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-controller@17a40000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0 0x17a40000 0 0x20000>;
+ status = "disabled";
+ };
+ };
+
+ apss_shared: mailbox@17c00000 {
+ compatible = "qcom,sc7180-apss-shared";
+ reg = <0 0x17c00000 0 0x10000>;
+ #mbox-cells = <1>;
+ };
+
+ watchdog@17c10000 {
+ compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
+ reg = <0 0x17c10000 0 0x1000>;
+ clocks = <&sleep_clk>;
+ };
+
+ timer@17c20000{
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0 0x17c20000 0 0x1000>;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0 0x17c21000 0 0x1000>,
+ <0 0x17c22000 0 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0 0x17c23000 0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0 0x17c25000 0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0 0x17c27000 0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0 0x17c29000 0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0 0x17c2b000 0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0 0x17c2d000 0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@18200000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0 0x18200000 0 0x10000>,
+ <0 0x18210000 0 0x10000>,
+ <0 0x18220000 0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>,
+ <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sc7180-rpmh-clk";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sc7180-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs_l2: opp6 {
+ opp-level = <224>;
+ };
+
+ rpmhpd_opp_nom: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp11 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ cpufreq_hw: cpufreq@18323000 {
+ compatible = "qcom,cpufreq-hw";
+ reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu4_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu4_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu5_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu5_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu6_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu6_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu7_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu7_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu8-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu8_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu8_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu8_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu8_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu8_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu9-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu9_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu9_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu9_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu9_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu9_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ aoss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpuss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpuss0_crit: cluster0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpuss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpuss1_crit: cluster0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ gpuss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ gpuss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cwlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cwlan_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ audio-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ audio_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ ddr_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_hvx_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mdm-core-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ mdm_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mdm-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ mdm_dsp_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ npu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ npu_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 9a4ff57fc877..7b53b3c7ffe6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -165,7 +165,6 @@
/delete-node/ &venus_mem;
/delete-node/ &cdsp_mem;
/delete-node/ &cdsp_pas;
-/delete-node/ &zap_shader;
/delete-node/ &gpu_mem;
/* Increase the size from 120 MB to 128 MB */
@@ -651,6 +650,20 @@ ap_ts_i2c: &i2c14 {
status = "okay";
};
+&spi5 {
+ status = "okay";
+
+ tpm@0 {
+ compatible = "google,cr50";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&h1_ap_int_odl>;
+ spi-max-frequency = <800000>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <129 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
&spi10 {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index d100f46791a6..eb77aaa6a819 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -197,7 +197,7 @@
&adsp_pas {
status = "okay";
- firmware-name = "qcom/db845c/adsp.mdt";
+ firmware-name = "qcom/sdm845/adsp.mdt";
};
&apps_rsc {
@@ -343,7 +343,7 @@
&cdsp_pas {
status = "okay";
- firmware-name = "qcom/db845c/cdsp.mdt";
+ firmware-name = "qcom/sdm845/cdsp.mdt";
};
&gcc {
@@ -352,6 +352,18 @@
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
};
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/a630_zap.mbn";
+ };
+};
+
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
&pm8998_gpio {
vol_up_pin_a: vol-up-active {
pins = "gpio6";
@@ -529,6 +541,8 @@
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+ qcom,snoc-host-cap-8bit-quirk;
};
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index c57548b7b250..09ad37b0dd71 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -360,6 +360,13 @@
<GCC_LPASS_SWAY_CLK>;
};
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/a630_zap.mbn";
+ };
+};
+
&i2c10 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ddb1f23c936f..d42302b8889b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1357,7 +1357,7 @@
};
};
- cache-controller@1100000 {
+ system-cache-controller@1100000 {
compatible = "qcom,sdm845-llcc";
reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>;
reg-names = "llcc_base", "llcc_broadcast_base";
@@ -1374,6 +1374,8 @@
lanes-per-direction = <2>;
power-domains = <&gcc UFS_PHY_GDSC>;
#reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
iommus = <&apps_smmu 0x100 0xf>;
@@ -1447,6 +1449,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 150>;
+ wakeup-parent = <&pdc_intc>;
qspi_clk: qspi-clk {
pinmux {
@@ -2804,7 +2807,7 @@
};
};
- gpu@5000000 {
+ gpu: gpu@5000000 {
compatible = "qcom,adreno-630.2", "qcom,adreno";
#stream-id-cells = <16>;
@@ -2824,10 +2827,6 @@
qcom,gmu = <&gmu>;
- zap_shader: zap-shader {
- memory-region = <&gpu_mem>;
- };
-
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -2939,6 +2938,15 @@
#power-domain-cells = <1>;
};
+ pdc_intc: interrupt-controller@b220000 {
+ compatible = "qcom,sdm845-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>;
+ qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
pdc_reset: reset-controller@b2e0000 {
compatible = "qcom,sdm845-pdc-global";
reg = <0 0x0b2e0000 0 0x20000>;
@@ -2950,8 +2958,9 @@
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <13>;
- interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -2960,8 +2969,9 @@
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <8>;
- interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -3191,7 +3201,7 @@
<0 0x17a60000 0 0x100000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- gic-its@17a40000 {
+ msi-controller@17a40000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 13dc619687f3..b255be3a4a0a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -245,6 +245,13 @@
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
};
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+ };
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index aa5de42fcae4..8ab16611ebe8 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
#include "sm8150.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
@@ -366,6 +367,18 @@
};
};
+&remoteproc_adsp {
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ status = "okay";
+};
+
+&remoteproc_slpi {
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>, <126 4>;
};
@@ -373,3 +386,25 @@
&uart2 {
status = "okay";
};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10a_2p5>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l9a_1p2>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+ vdda-max-microamp = <90200>;
+ vdda-pll-supply = <&vreg_l3c_1p2>;
+ vdda-pll-max-microamp = <19000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 8f23fcadecb8..141c21dfa68c 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -5,8 +5,11 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,gcc-sm8150.h>
/ {
interrupt-parent = <&intc>;
@@ -42,6 +45,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -57,6 +61,7 @@
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -70,6 +75,7 @@
reg = <0x0 0x200>;
enable-method = "psci";
next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -82,6 +88,7 @@
reg = <0x0 0x300>;
enable-method = "psci";
next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -94,6 +101,7 @@
reg = <0x0 0x400>;
enable-method = "psci";
next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -106,6 +114,7 @@
reg = <0x0 0x500>;
enable-method = "psci";
next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -118,6 +127,7 @@
reg = <0x0 0x600>;
enable-method = "psci";
next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -130,6 +140,7 @@
reg = <0x0 0x700>;
enable-method = "psci";
next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -283,6 +294,102 @@
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 6>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+
+ interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 26>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
@@ -306,8 +413,8 @@
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc 123>,
- <&gcc 124>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -317,17 +424,120 @@
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
clock-names = "se";
- clocks = <&gcc 105>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <37500000 300000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sm8150-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: lanes@1d87400 {
+ reg = <0 0x01d87400 0 0x108>,
+ <0 0x01d87600 0 0x1e0>,
+ <0 0x01d87c00 0 0x1dc>,
+ <0 0x01d87800 0 0x108>,
+ <0 0x01d87a00 0 0x1e0>;
+ #phy-cells = <0>;
+ };
+ };
+
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
reg = <0x0 0x01f40000 0x0 0x40000>;
};
+ remoteproc_slpi: remoteproc@2400000 {
+ compatible = "qcom,sm8150-slpi-pas";
+ reg = <0x0 0x02400000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+ <&rpmhpd 3>,
+ <&rpmhpd 2>;
+ power-domain-names = "load_state", "lcx", "lmx";
+
+ memory-region = <&slpi_mem>;
+
+ qcom,smem-states = <&slpi_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+ label = "dsps";
+ qcom,remote-pid = <3>;
+ mboxes = <&apss_shared 24>;
+ };
+ };
+
tlmm: pinctrl@3100000 {
compatible = "qcom,sm8150-pinctrl";
reg = <0x0 0x03100000 0x0 0x300000>,
@@ -343,6 +553,74 @@
#interrupt-cells = <2>;
};
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sm8150-mpss-pas";
+ reg = <0x0 0x04080000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+ <&rpmhpd 7>,
+ <&rpmhpd 0>;
+ power-domain-names = "load_state", "cx", "mss";
+
+ memory-region = <&mpss_mem>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apss_shared 12>;
+ };
+ };
+
+ remoteproc_cdsp: remoteproc@8300000 {
+ compatible = "qcom,sm8150-cdsp-pas";
+ reg = <0x0 0x08300000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+ <&rpmhpd 7>;
+ power-domain-names = "load_state", "cx";
+
+ memory-region = <&cdsp_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ mboxes = <&apss_shared 4>;
+ };
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8150-aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -372,6 +650,40 @@
cell-index = <0>;
};
+ remoteproc_adsp: remoteproc@17300000 {
+ compatible = "qcom,sm8150-adsp-pas";
+ reg = <0x0 0x17300000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+ <&rpmhpd 7>;
+ power-domain-names = "load_state", "cx";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apss_shared 8>;
+ };
+ };
+
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
interrupt-controller;
@@ -387,6 +699,12 @@
#mbox-cells = <1>;
};
+ watchdog@17c10000 {
+ compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
+ reg = <0 0x17c10000 0 0x1000>;
+ clocks = <&sleep_clk>;
+ };
+
timer@17c20000 {
#address-cells = <2>;
#size-cells = <2>;
@@ -469,6 +787,73 @@
clock-names = "xo";
clocks = <&xo_board>;
};
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sm8150-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs_l2: opp6 {
+ opp-level = <224>;
+ };
+
+ rpmhpd_opp_nom: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp11 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ cpufreq_hw: cpufreq@18323000 {
+ compatible = "qcom,cpufreq-hw";
+ reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
+ <0 0x18327800 0 0x1400>;
+ reg-names = "freq-domain0", "freq-domain1",
+ "freq-domain2";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
};
};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 8fdbd2267384..2153842321ce 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -3,22 +3,21 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
-dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-m3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
+ r8a774c0-ek874-idk-2121wr.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 2c942a7eaeeb..bd056904e8bd 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -109,8 +109,7 @@
gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
wlan_en_reg: regulator-wlan_en {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 34a9f472fbb4..8f950dabca54 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -521,12 +521,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -837,8 +837,8 @@
compatible = "renesas,r8a774a1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -851,8 +851,8 @@
compatible = "renesas,r8a774a1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -878,23 +878,23 @@
compatible = "renesas,dmac-r8a774a1",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -920,23 +920,23 @@
compatible = "renesas,dmac-r8a774a1",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -962,23 +962,23 @@
compatible = "renesas,dmac-r8a774a1",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2075,23 +2075,23 @@
compatible = "renesas,dmac-r8a774a1",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2117,23 +2117,23 @@
compatible = "renesas,dmac-r8a774a1",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2323,10 +2323,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2350,10 +2350,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
- 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
- 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
- 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+ <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index fe78387e4bb8..c40ea300968e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -395,12 +395,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -711,8 +711,8 @@
compatible = "renesas,r8a774b1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -725,8 +725,8 @@
compatible = "renesas,r8a774b1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -752,23 +752,23 @@
compatible = "renesas,dmac-r8a774b1",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -794,23 +794,23 @@
compatible = "renesas,dmac-r8a774b1",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -836,23 +836,23 @@
compatible = "renesas,dmac-r8a774b1",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1949,23 +1949,23 @@
compatible = "renesas,dmac-r8a774b1",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1983,23 +1983,23 @@
compatible = "renesas,dmac-r8a774b1",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2192,10 +2192,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2219,10 +2219,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
- 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
- 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
- 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+ <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index c99b1dec52ef..26aee004a44e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -110,8 +110,7 @@
gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
wlan_en_reg: fixedregulator {
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
new file mode 100644
index 000000000000..a7b27d09f6c2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
+ * connected to an Advantech IDK-2121WR 21.5" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-ek874.dts"
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm5 0 50000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+
+ power-supply = <&reg_12p0v>;
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ panel-lvds {
+ compatible = "advantech,idk-2121wr", "panel-lvds";
+
+ width-mm = <476>;
+ height-mm = <268>;
+
+ data-mapping = "vesa-24";
+
+ panel-timing {
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <44>;
+ hfront-porch = <88>;
+ hback-porch = <148>;
+ vfront-porch = <4>;
+ vback-porch = <36>;
+ vsync-len = <5>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+ panel_in0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+ panel_in1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+ };
+};
+
+&gpio0 {
+ /*
+ * When GP0_17 is low LVDS[01] are connected to the LVDS connector
+ * When GP0_17 is high LVDS[01] are connected to the LT8918L
+ */
+ lvds-connector-en-gpio{
+ gpio-hog;
+ gpios = <17 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "lvds-connector-en-gpio";
+ };
+};
+
+&lvds0 {
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in0>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+ };
+};
+
+&pfc {
+ pwm5_pins: pwm5 {
+ groups = "pwm5_a";
+ function = "pwm5";
+ };
+};
+
+&pwm5 {
+ pinctrl-0 = <&pwm5_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index c7bdc3606323..a53cd5fcc401 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -369,12 +369,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -697,8 +697,8 @@
compatible = "renesas,r8a774c0-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -711,8 +711,8 @@
compatible = "renesas,r8a774c0-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -725,23 +725,23 @@
compatible = "renesas,dmac-r8a774c0",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -767,23 +767,23 @@
compatible = "renesas,dmac-r8a774c0",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -809,23 +809,23 @@
compatible = "renesas,dmac-r8a774c0",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1521,23 +1521,23 @@
compatible = "renesas,dmac-r8a774c0",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1679,10 +1679,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
index c72968623e94..2438825c9b22 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
@@ -6,11 +6,11 @@
*/
/dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a77950.dtsi"
#include "salvator-x.dtsi"
/ {
- model = "Renesas Salvator-X board based on r8a7795 ES1.x";
+ model = "Renesas Salvator-X board based on r8a77950";
compatible = "renesas,salvator-x", "renesas,r8a7795";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
index 80791ed27539..dcaaf12cec40 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
@@ -6,11 +6,11 @@
* Copyright (C) 2017 Cogent Embedded, Inc.
*/
-#include "r8a7795-h3ulcb.dts"
+#include "r8a77950-ulcb.dts"
#include "ulcb-kf.dtsi"
/ {
- model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+";
+ model = "Renesas H3ULCB Kingfisher board based on r8a77950";
compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
"renesas,r8a7795";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
index 598b98168559..38a6d6a108d4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
@@ -7,11 +7,11 @@
*/
/dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a77950.dtsi"
#include "ulcb.dtsi"
/ {
- model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+ model = "Renesas H3ULCB board based on r8a77950";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
index 14d8513d2a47..15216495e1c8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
@@ -1,11 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
&audma0 {
iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
index 72874f675359..a402a2fb6e3c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
@@ -6,11 +6,11 @@
*/
/dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
#include "salvator-x.dtsi"
/ {
- model = "Renesas Salvator-X board based on r8a7795 ES2.0+";
+ model = "Renesas Salvator-X board based on r8a77951";
compatible = "renesas,salvator-x", "renesas,r8a7795";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
index 36667c81d43d..cef9da4376a3 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
@@ -1,16 +1,16 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0+
*
* Copyright (C) 2015-2017 Renesas Electronics Corp.
*/
/dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
#include "salvator-xs.dtsi"
/ {
- model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+";
+ model = "Renesas Salvator-X 2nd version board based on r8a77951";
compatible = "renesas,salvator-xs", "renesas,r8a7795";
memory@48000000 {
@@ -136,7 +136,7 @@
* - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
* (when SW31 is the default setting on Salvator-XS).
* - If SW31 is the default setting, you cannot use USB2.0 ch3 on
- * r8a7795 with Salvator-XS.
+ * r8a77951 with Salvator-XS.
* Hence the SW31 setting must be changed like 2) below.
* 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
* - Connect GP6_3[01] to ADV7842.
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
index 2f24dfc45617..11f943a67703 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
@@ -6,11 +6,11 @@
* Copyright (C) 2017 Cogent Embedded, Inc.
*/
-#include "r8a7795-es1-h3ulcb.dts"
+#include "r8a77951-ulcb.dts"
#include "ulcb-kf.dtsi"
/ {
- model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES1.x";
+ model = "Renesas H3ULCB Kingfisher board based on r8a77951";
compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
"renesas,r8a7795";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
index 54515eaf0310..8ad8f2a53977 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
@@ -7,11 +7,11 @@
*/
/dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
#include "ulcb.dtsi"
/ {
- model = "Renesas H3ULCB board based on r8a7795 ES2.0+";
+ model = "Renesas H3ULCB board based on r8a77951";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index fde6ec122d3b..a8729eb744db 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the R-Car H3 (R8A77950) SoC
+ * Device Tree Source for the R-Car H3 (R8A77951) SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
@@ -605,12 +605,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -873,8 +873,8 @@
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -887,8 +887,8 @@
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -901,8 +901,8 @@
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe6460000 0 0x100>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 326>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -915,8 +915,8 @@
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe6470000 0 0x100>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 329>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -951,23 +951,23 @@
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -993,23 +993,23 @@
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1035,23 +1035,23 @@
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2343,23 +2343,23 @@
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2385,23 +2385,23 @@
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2679,10 +2679,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2706,10 +2706,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
- 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
- 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
- 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+ <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
index de37e91e3b7a..ecfbeafeaf36 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
@@ -6,11 +6,11 @@
*/
/dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
#include "salvator-x.dtsi"
/ {
- model = "Renesas Salvator-X board based on r8a7796";
+ model = "Renesas Salvator-X board based on r8a77960";
compatible = "renesas,salvator-x", "renesas,r8a7796";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
index a1cbfef2053f..249896a38fdc 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
@@ -6,11 +6,11 @@
*/
/dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
#include "salvator-xs.dtsi"
/ {
- model = "Renesas Salvator-X 2nd version board based on r8a7796";
+ model = "Renesas Salvator-X 2nd version board based on r8a77960";
compatible = "renesas,salvator-xs", "renesas,r8a7796";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
index 2df50eb11f16..2151c37d77a6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
@@ -6,11 +6,11 @@
* Copyright (C) 2017 Cogent Embedded, Inc.
*/
-#include "r8a7796-m3ulcb.dts"
+#include "r8a77960-ulcb.dts"
#include "ulcb-kf.dtsi"
/ {
- model = "Renesas M3ULCB Kingfisher board based on r8a7796";
+ model = "Renesas M3ULCB Kingfisher board based on r8a77960";
compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
"renesas,r8a7796";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
index 9e4594c27fa6..d041042a5619 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
@@ -7,11 +7,11 @@
*/
/dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
#include "ulcb.dtsi"
/ {
- model = "Renesas M3ULCB board based on r8a7796";
+ model = "Renesas M3ULCB board based on r8a77960";
compatible = "renesas,m3ulcb", "renesas,r8a7796";
memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index b9db882b0351..60f156cfd2d6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -574,12 +574,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -825,8 +825,8 @@
compatible = "renesas,r8a7796-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -839,8 +839,8 @@
compatible = "renesas,r8a7796-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -866,23 +866,23 @@
compatible = "renesas,dmac-r8a7796",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -908,23 +908,23 @@
compatible = "renesas,dmac-r8a7796",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -950,23 +950,23 @@
compatible = "renesas,dmac-r8a7796",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2210,23 +2210,23 @@
compatible = "renesas,dmac-r8a7796",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2252,23 +2252,23 @@
compatible = "renesas,dmac-r8a7796",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2462,10 +2462,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2489,10 +2489,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
- 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
- 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
- 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+ <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 64466c86b698..be3824bda632 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -319,53 +319,133 @@
ranges;
rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a77961-wdt",
+ "renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
- /* placeholder */
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a77961",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pfc: pin-controller@e6060000 {
@@ -401,27 +481,138 @@
/* placeholder */
};
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77961",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77961",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
i2c2: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "renesas,i2c-r8a77961",
+ "renesas,rcar-gen3-i2c";
reg = <0 0xe6510000 0 0x40>;
- /* placeholder */
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77961",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
};
i2c4: i2c@e66d8000 {
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "renesas,i2c-r8a77961",
+ "renesas,rcar-gen3-i2c";
reg = <0 0xe66d8000 0 0x40>;
- /* placeholder */
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77961",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77961",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
};
i2c_dvfs: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "renesas,iic-r8a77961",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
- /* placeholder */
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
};
+
hscif1: serial@e6550000 {
reg = <0 0xe6550000 0 0x60>;
/* placeholder */
@@ -438,11 +629,151 @@
/* placeholder */
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a77961",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a77961",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a77961",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a77961",
+ "renesas,etheravb-rcar-gen3";
reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ phy-mode = "rgmii";
#address-cells = <1>;
#size-cells = <0>;
- /* placeholder */
+ status = "disabled";
};
pwm1: pwm@e6e31000 {
@@ -574,18 +905,51 @@
};
sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
- /* placeholder */
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
+ status = "disabled";
};
sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
- /* placeholder */
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
};
sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a77961",
+ "renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
- /* placeholder */
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
};
gic: interrupt-controller@f1010000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
index dadad97051b9..12aa08fd6fd8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
@@ -6,7 +6,7 @@
* Copyright (C) 2018 Cogent Embedded, Inc.
*/
-#include "r8a77965-m3nulcb.dts"
+#include "r8a77965-ulcb.dts"
#include "ulcb-kf.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
index 964078b6cc49..964078b6cc49 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index bdbe197774d2..c17d90bd160e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -429,12 +429,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -680,8 +680,8 @@
compatible = "renesas,r8a77965-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -694,8 +694,8 @@
compatible = "renesas,r8a77965-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -721,23 +721,23 @@
compatible = "renesas,dmac-r8a77965",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -763,23 +763,23 @@
compatible = "renesas,dmac-r8a77965",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -805,23 +805,23 @@
compatible = "renesas,dmac-r8a77965",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1937,23 +1937,23 @@
compatible = "renesas,dmac-r8a77965",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1971,23 +1971,23 @@
compatible = "renesas,dmac-r8a77965",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -2184,10 +2184,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2211,10 +2211,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
- 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
- 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
- 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+ <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 0d0558e53533..664a73a2cc69 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -302,8 +302,8 @@
thermal: thermal@e6190000 {
compatible = "renesas,thermal-r8a77970";
- reg = <0 0xe6190000 0 0x10
- 0 0xe6190100 0 0x120>;
+ reg = <0 0xe6190000 0 0x10>,
+ <0 0xe6190100 0 0x120>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
@@ -318,12 +318,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -933,15 +933,15 @@
compatible = "renesas,dmac-r8a77970",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7";
@@ -961,15 +961,15 @@
compatible = "renesas,dmac-r8a77970",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 4d86669af819..b340fb469999 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -348,12 +348,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -1174,23 +1174,23 @@
compatible = "renesas,dmac-r8a77980",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1216,23 +1216,23 @@
compatible = "renesas,dmac-r8a77980",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1367,21 +1367,17 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <
- 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000
- >;
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000
- 0 0x80000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 148
- IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index b38f9d442fc0..4fd2b14fbb8b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -182,8 +182,7 @@
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -206,8 +205,7 @@
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vga {
@@ -636,7 +634,6 @@
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
- clkout-lr-synchronous;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 67a6824a962c..32d91f210246 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -394,12 +394,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -643,8 +643,8 @@
compatible = "renesas,r8a77990-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -657,8 +657,8 @@
compatible = "renesas,r8a77990-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -671,23 +671,23 @@
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -713,23 +713,23 @@
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -755,23 +755,23 @@
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1474,23 +1474,23 @@
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -1635,10 +1635,10 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e6ee2b709ba6..9503007c34c0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -231,12 +231,12 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 407>;
@@ -365,8 +365,8 @@
compatible = "renesas,r8a77995-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -379,8 +379,8 @@
compatible = "renesas,r8a77995-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -418,15 +418,15 @@
compatible = "renesas,dmac-r8a77995",
"renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x10000>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7";
@@ -446,15 +446,15 @@
compatible = "renesas,dmac-r8a77995",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7";
@@ -474,15 +474,15 @@
compatible = "renesas,dmac-r8a77995",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
- interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7";
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 21e01056e759..98bbcafc8c0d 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -232,8 +232,7 @@
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi3: regulator-vcc-sdhi3 {
@@ -256,8 +255,7 @@
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vga {
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 3ef89171538f..ff88af8e39d3 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -120,8 +120,7 @@
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
x12_clk: x12 {
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 48fb631d5451..60d9437096c7 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 936ed7d71ffc..0a680257d9c2 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -112,6 +112,38 @@
status = "okay";
};
+&dsi {
+ status = "okay";
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "xinpeng,xpp055c272";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vci-supply = <&vcc3v3_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
@@ -132,6 +164,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_log>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -485,6 +522,12 @@
status = "okay";
};
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
&u2phy {
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 8812b70f3911..75908c587511 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/px30-power.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,px30";
@@ -113,16 +114,11 @@
compatible = "operating-points-v2";
opp-shared;
- opp-408000000 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <950000 950000 1350000>;
- clock-latency-ns = <40000>;
- opp-suspend;
- };
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000 950000 1350000>;
clock-latency-ns = <40000>;
+ opp-suspend;
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
@@ -181,6 +177,55 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ thermal_zones: thermal-zones {
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <750>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ threshold: trip-point-0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: trip-point-1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc_crit: soc-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+
+ map1 {
+ trip = <&target>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&tsadc 1>;
+ };
+ };
+
xin24m: xin24m {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -365,6 +410,33 @@
compatible = "rockchip,px30-io-voltage-domain";
status = "disabled";
};
+
+ lvds: lvds {
+ compatible = "rockchip,px30-lvds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phys = <&dsi_dphy>;
+ phy-names = "dphy";
+ rockchip,grf = <&grf>;
+ rockchip,output = "lvds";
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_vopb_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+
+ lvds_vopl_in: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
+ };
+ };
};
uart1: serial@ff158000 {
@@ -645,6 +717,26 @@
};
};
+ tsadc: tsadc@ff280000 {
+ compatible = "rockchip,px30-tsadc";
+ reg = <0x0 0xff280000 0x0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <50000>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ rockchip,grf = <&grf>;
+ rockchip,hw-tshut-temp = <120000>;
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&tsadc_otp_gpio>;
+ pinctrl-1 = <&tsadc_otp_out>;
+ pinctrl-2 = <&tsadc_otp_gpio>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
saradc: saradc@ff288000 {
compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
reg = <0x0 0xff288000 0x0 0x100>;
@@ -755,6 +847,18 @@
};
};
+ dsi_dphy: phy@ff2e0000 {
+ compatible = "rockchip,px30-dsi-dphy";
+ reg = <0x0 0xff2e0000 0x0 0x10000>;
+ clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+ clock-names = "ref", "pclk";
+ resets = <&cru SRST_MIPIDSIPHY_P>;
+ reset-names = "apb";
+ #phy-cells = <0>;
+ power-domains = <&power PX30_PD_VO>;
+ status = "disabled";
+ };
+
usb20_otg: usb@ff300000 {
compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
"snps,dwc2";
@@ -820,13 +924,13 @@
status = "disabled";
};
- sdmmc: dwmmc@ff370000 {
+ sdmmc: mmc@ff370000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff370000 0x0 0x4000>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
@@ -835,13 +939,13 @@
status = "disabled";
};
- sdio: dwmmc@ff380000 {
+ sdio: mmc@ff380000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff380000 0x0 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
@@ -850,13 +954,13 @@
status = "disabled";
};
- emmc: dwmmc@ff390000 {
+ emmc: mmc@ff390000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff390000 0x0 0x4000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
@@ -865,6 +969,57 @@
status = "disabled";
};
+ gpu: gpu@ff400000 {
+ compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+ reg = <0x0 0xff400000 0x0 0x4000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&cru SCLK_GPU>;
+ #cooling-cells = <2>;
+ power-domains = <&power PX30_PD_GPU>;
+ status = "disabled";
+ };
+
+ dsi: dsi@ff450000 {
+ compatible = "rockchip,px30-mipi-dsi";
+ reg = <0x0 0xff450000 0x0 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_MIPI_DSI>;
+ clock-names = "pclk";
+ phys = <&dsi_dphy>;
+ phy-names = "dphy";
+ power-domains = <&power PX30_PD_VO>;
+ resets = <&cru SRST_MIPIDSI_HOST_P>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_dsi>;
+ };
+
+ dsi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_dsi>;
+ };
+ };
+ };
+ };
+
vopb: vop@ff460000 {
compatible = "rockchip,px30-vop-big";
reg = <0x0 0xff460000 0x0 0xefc>;
@@ -882,6 +1037,16 @@
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
+ vopb_out_dsi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in_vopb>;
+ };
+
+ vopb_out_lvds: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds_vopb_in>;
+ };
};
};
@@ -914,6 +1079,16 @@
vopl_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
+ vopl_out_dsi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in_vopl>;
+ };
+
+ vopl_out_lvds: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds_vopl_in>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 8bdc66c62975..116f1900effb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -584,14 +584,14 @@
status = "disabled";
};
- sdmmc: dwmmc@ff480000 {
+ sdmmc: mmc@ff480000 {
compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff480000 0x0 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <4>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
@@ -599,27 +599,27 @@
status = "disabled";
};
- emmc: dwmmc@ff490000 {
+ emmc: mmc@ff490000 {
compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff490000 0x0 0x4000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
status = "disabled";
};
- sdio: dwmmc@ff4a0000 {
+ sdio: mmc@ff4a0000 {
compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff4a0000 0x0 0x4000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <4>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 91306ebed4da..1f53ead52c7f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -41,6 +41,7 @@
reg = <0x0 0x0>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -53,6 +54,7 @@
reg = <0x0 0x1>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -65,6 +67,7 @@
reg = <0x0 0x2>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -77,12 +80,26 @@
reg = <0x0 0x3>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu0_opp_table>;
};
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+ };
+
l2: l2-cache0 {
compatible = "cache";
};
@@ -837,7 +854,7 @@
};
};
- sdmmc: dwmmc@ff500000 {
+ sdmmc: mmc@ff500000 {
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff500000 0x0 0x4000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -849,7 +866,7 @@
status = "disabled";
};
- sdio: dwmmc@ff510000 {
+ sdio: mmc@ff510000 {
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff510000 0x0 0x4000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -861,7 +878,7 @@
status = "disabled";
};
- emmc: dwmmc@ff520000 {
+ emmc: mmc@ff520000 {
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff520000 0x0 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
index 8251f3c0d0a8..cbde279ae81d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -83,12 +83,6 @@
status = "okay";
};
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
&usb_otg {
dr_mode = "otg";
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index fd86188010b2..a0df61c61925 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -204,7 +204,7 @@
#clock-cells = <0>;
};
- sdmmc: dwmmc@ff0c0000 {
+ sdmmc: mmc@ff0c0000 {
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0c0000 0x0 0x4000>;
max-frequency = <150000000>;
@@ -218,7 +218,7 @@
status = "disabled";
};
- sdio0: dwmmc@ff0d0000 {
+ sdio0: mmc@ff0d0000 {
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0d0000 0x0 0x4000>;
max-frequency = <150000000>;
@@ -232,7 +232,7 @@
status = "disabled";
};
- emmc: dwmmc@ff0f0000 {
+ emmc: mmc@ff0f0000 {
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0f0000 0x0 0x4000>;
max-frequency = <150000000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c706db0ee9ec..d63faf38cc81 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -206,7 +206,7 @@
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <800000>;
+ regulator-min-microvolt = <430000>;
regulator-max-microvolt = <1400000>;
vin-supply = <&vcc_sys>;
};
@@ -660,7 +660,6 @@
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
@@ -669,9 +668,12 @@
vqmmc-supply = &vcc1v8_s3; /* IO line */
vmmc-supply = &vcc_sdio; /* card's power */
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index 9dd3b171e91d..e6c1c94c8d69 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -18,7 +18,7 @@
"google,bob", "google,gru", "rockchip,rk3399";
edp_panel: edp-panel {
- compatible = "boe,nv101wxmn51", "simple-panel";
+ compatible = "boe,nv101wxmn51";
backlight = <&backlight>;
power-supply = <&pp3300_disp>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index b8066868a3fe..2bbef9fcbe27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -39,7 +39,7 @@
};
edp_panel: edp-panel {
- compatible = "sharp,lq123p1jx31", "simple-panel";
+ compatible = "sharp,lq123p1jx31";
backlight = <&backlight>;
power-supply = <&pp3300_disp>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index c133e8d64b2a..d69a613fb65a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -556,7 +556,6 @@
&sdmmc {
clock-frequency = <150000000>;
clock-freq-min-max = <200000 150000000>;
- supports-sd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
@@ -572,7 +571,6 @@
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
- supports-emmc;
non-removable;
keep-power-in-suspend;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 4944d78a0a1c..e87a04477440 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -654,9 +654,12 @@
sd-uhs-sdr104;
vqmmc-supply = <&vcc1v8_s3>;
vmmc-supply = <&vccio_sd>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 2a127985ab17..e0d75617bb7e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -94,31 +94,9 @@
};
};
-&gpu_thermal {
- trips {
- gpu_warm: gpu_warm {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- gpu_hot: gpu_hot {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
- };
- };
- cooling-maps {
- map1 {
- trip = <&gpu_warm>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
- };
-
- map2 {
- trip = <&gpu_hot>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
- };
- };
+&pcie0 {
+ num-lanes = <4>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
};
&pinctrl {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index b788ae4f47f0..c88018a0ef35 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -48,7 +48,7 @@
};
/* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ vcc1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
@@ -71,6 +71,27 @@
vin-supply = <&vcc3v3_sys>;
};
+ /*
+ * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+ * drives the enable pin, but we can't quite model that.
+ */
+ vcca0v9_s3: vcca0v9-s3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vcca0v9_s3";
+ vin-supply = <&vcc1v8_s3>;
+ };
+
+ /* As above, actually supplied by vcc3v3_sys */
+ vcca1v8_s3: vcca1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_s3";
+ vin-supply = <&vcc1v8_s3>;
+ };
+
vbus_typec: vbus-typec {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
@@ -485,7 +506,9 @@
&pcie0 {
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
max-link-speed = <2>;
- num-lanes = <4>;
+ num-lanes = <2>;
+ vpcie0v9-supply = <&vcca0v9_s3>;
+ vpcie1v8-supply = <&vcca1v8_s3>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 0541dfce924d..9c659f3115c8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -648,9 +648,12 @@
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
index d6b3042cffa9..2acb3d500fb9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -32,8 +32,6 @@
gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc3v3_pcie_en>;
- regulator-always-on;
- regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
@@ -50,6 +48,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie_perst>;
vpcie3v3-supply = <&vcc3v3_pcie>;
+ vpcie1v8-supply = <&vcc1v8_pmu>;
+ vpcie0v9-supply = <&vcca_0v9>;
status = "okay";
};
@@ -70,3 +70,24 @@
};
};
};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_ngff>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 7e07dae33d0f..9f225e9c3d54 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -110,20 +110,6 @@
regulator-max-microvolt = <5000000>;
};
- /*
- * should be placed inside mp8859, but not until mp8859 has
- * its own dt-binding.
- */
- dc_12v: mp8859-dcdc1 {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <&vcc_vbus_typec0>;
- };
-
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
@@ -135,6 +121,19 @@
vin-supply = <&vcc_1v8>;
};
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v0_sd_en>;
+ regulator-name = "vcc3v0_sd";
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
@@ -145,6 +144,16 @@
vin-supply = <&dc_12v>;
};
+ vcca_0v9: vcca-0v9 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
@@ -153,7 +162,6 @@
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
regulator-name = "vcc5v0_host";
- regulator-always-on;
vin-supply = <&vcc_sys>;
};
@@ -175,7 +183,6 @@
pinctrl-names = "default";
pinctrl-0 = <&vcc_sys_en>;
regulator-name = "vcc_sys";
- regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -188,9 +195,9 @@
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <800000>;
+ regulator-min-microvolt = <450000>;
regulator-max-microvolt = <1400000>;
- vin-supply = <&vcc3v3_sys>;
+ pwm-supply = <&vcc3v3_sys>;
};
};
@@ -238,6 +245,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
ddc-i2c-bus = <&i2c3>;
pinctrl-names = "default";
@@ -245,6 +257,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
@@ -360,7 +376,6 @@
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
- regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
@@ -465,8 +480,6 @@
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
@@ -519,6 +532,24 @@
vbus-supply = <&vcc_vbus_typec0>;
status = "okay";
};
+
+ mp8859: regulator@66 {
+ compatible = "mps,mp8859";
+ reg = <0x66>;
+ dc_12v: mp8859_dcdc {
+ regulator-name = "dc_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_vbus_typec0>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <12000000>;
+ };
+ };
+ };
};
&i2s0 {
@@ -559,7 +590,7 @@
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
@@ -593,6 +624,12 @@
};
};
+ sdmmc {
+ vcc3v0_sd_en: vcc3v0-sd-en {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -645,24 +682,34 @@
&sdmmc {
bus-width = <4>;
- cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
&sdhci {
bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
+&spi1 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
&tcphy0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 188d9dfc297b..3923ec01ef66 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -53,6 +53,16 @@
vin-supply = <&vcc12v_dcin>;
};
+ vcc_0v9: vcc-0v9 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -463,6 +473,22 @@
pmu1830-supply = <&vcc_3v0>;
};
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+ max-link-speed = <2>;
+ num-lanes = <4>;
+ pinctrl-0 = <&pcie_clkreqnb_cpm>;
+ pinctrl-names = "default";
+ vpcie0v9-supply = <&vcc_0v9>;
+ vpcie1v8-supply = <&vcc_1v8>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
&pinctrl {
bt {
bt_enable_h: bt-enable-h {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index c7d48d41e184..b69f0f2cbd67 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -76,6 +76,15 @@
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
+
+ vcc_0v9: vcc-0v9 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_0v9";
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
};
&cpu_l0 {
@@ -384,6 +393,8 @@
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
+ vpcie0v9-supply = <&vcc_0v9>;
+ vpcie1v8-supply = <&vcca_1v8>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
new file mode 100644
index 000000000000..304e3c51391c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+ model = "Pine64 RockPro64 v2.0";
+ compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+ es8316: codec@10 {
+ compatible = "everest,es8316";
+ reg = <0x10>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s1_p0_0>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 7f4b2eba31d4..4b42717800f7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -2,481 +2,18 @@
/*
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
* Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
*/
/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-rockpro64.dtsi"
/ {
- model = "Pine64 RockPro64";
- compatible = "pine64,rockpro64", "rockchip,rk3399";
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
-
- work-led {
- label = "work";
- default-state = "on";
- gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
- };
-
- diy-led {
- label = "diy";
- default-state = "off";
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- fan: pwm-fan {
- compatible = "pwm-fan";
- #cooling-cells = <2>;
- fan-supply = <&vcc12v_dcin>;
- pwms = <&pwm1 0 50000 0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- sound {
- compatible = "audio-graph-card";
- label = "rockchip,rk3399";
- dais = <&i2s1_p0>;
- };
-
- vcc12v_dcin: vcc12v-dcin {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pwr_en>;
- regulator-name = "vcc3v3_pcie";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc5v0_usb>;
- };
-
- vcc5v0_typec: vcc5v0-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec_en>;
- regulator-name = "vcc5v0_typec";
- regulator-always-on;
- vin-supply = <&vcc5v0_usb>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc5v0_usb: vcc5v0-usb {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1700000>;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio3>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcca_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v0_touch: LDO_REG2 {
- regulator-name = "vcc3v0_touch";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
+ model = "Pine64 RockPro64 v2.1";
+ compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
};
&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-
es8316: codec@11 {
compatible = "everest,es8316";
reg = <0x11>;
@@ -491,291 +28,3 @@
};
};
};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb0: typec-portc@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vcc5v0_typec>;
- status = "okay";
- };
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-
- i2s1_p0: port {
- i2s1_p0_0: endpoint {
- dai-format = "i2s";
- mclk-fs = <256>;
- remote-endpoint = <&es8316_p0_0>;
- };
- };
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
- gpio1830-supply = <&vcc_3v0>;
-};
-
-&pcie0 {
- ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_perst>;
- vpcie12v-supply = <&vcc12v_dcin>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- fusb302x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- work_led_gpio: work_led-gpio {
- rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- diy_led_gpio: diy_led-gpio {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_perst: pcie-perst {
- rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_pwr_en: pcie-pwr-en {
- rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_gpio: vsel1-gpio {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb-typec {
- vcc5v0_typec_en: vcc5v0_typec_en {
- rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "otg";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
new file mode 100644
index 000000000000..9bca25801260
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ fan-supply = <&vcc12v_dcin>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3399";
+ dais = <&i2s1_p0>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1700000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcca_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+
+ i2s1_p0: port {
+ i2s1_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_perst>;
+ vpcie12v-supply = <&vcc12v_dcin>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_perst: pcie-perst {
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 808ea77f951d..b4d8f60b7e44 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -84,7 +84,7 @@
};
edp_panel: edp-panel {
- compatible ="lg,lp079qx1-sp0v", "simple-panel";
+ compatible ="lg,lp079qx1-sp0v";
backlight = <&backlight>;
enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index e62ea0e2b657..33cc21fcf4c1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -291,7 +291,7 @@
status = "disabled";
};
- sdio0: dwmmc@fe310000 {
+ sdio0: mmc@fe310000 {
compatible = "rockchip,rk3399-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe310000 0x0 0x4000>;
@@ -307,7 +307,7 @@
status = "disabled";
};
- sdmmc: dwmmc@fe320000 {
+ sdmmc: mmc@fe320000 {
compatible = "rockchip,rk3399-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe320000 0x0 0x4000>;
@@ -828,6 +828,14 @@
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
};
@@ -1887,6 +1895,7 @@
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "gpu", "job", "mmu";
clocks = <&cru ACLK_GPU>;
+ #cooling-cells = <2>;
power-domains = <&power RK3399_PD_GPU>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
new file mode 100644
index 000000000000..b42f94179538
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include "rk3399pro-vmarc-som.dtsi"
+#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+
+/ {
+ model = "Radxa ROCK Pi N10";
+ compatible = "radxa,rockpi-n10", "rockchip,rk3399pro";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 000000000000..0a516334f15f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <180>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-name = "vcc_buck5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcca_0v9: LDO_REG1 {
+ regulator-name = "vcca_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_0v9: LDO_REG3 {
+ regulator-name = "vcc_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG4 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ /*
+ * As per BSP, but schematic not showing any regulator
+ * pin for LD05.
+ */
+ vdd1v5_dvp: LDO_REG5 {
+ regulator-name = "vdd1v5_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_3v0: LDO_REG7 {
+ regulator-name = "vccio_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ /*
+ * As per BSP, but schematic not showing any regulator
+ * pin for LD09.
+ */
+ vcc_sd: LDO_REG9 {
+ regulator-name = "vcc_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v0_usb2: SWITCH_REG1 {
+ regulator-name = "vcc5v0_usb2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <5000000>;
+ };
+ };
+
+ vccio_3v3: vcc_lan: SWITCH_REG2 {
+ regulator-name = "vccio_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcca_1v8>;
+ sdmmc-supply = <&vccio_sd>;
+ gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tsadc {
+ status = "okay";
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC2 0 &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 8ec40a0b8b1e..5b18bda9c5a6 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -633,7 +633,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index b658f2b641e2..f2dc5f695020 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -937,7 +937,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index d6f6cee4d549..73e7e1203b09 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -795,7 +795,8 @@
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
- resets = <&sys_rst 2>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
};
};
};
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index 2bdc23804f40..f4f1f5148cc2 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
- sp9860g-1h10.dtb
+ sp9860g-1h10.dtb \
+ sp9863a-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
new file mode 100644
index 000000000000..cd80756c888d
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ core4 {
+ cpu = <&CPU4>;
+ };
+ core5 {
+ cpu = <&CPU5>;
+ };
+ core6 {
+ cpu = <&CPU6>;
+ };
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD>;
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+ CORE_PD: core-pd {
+ compatible = "arm,idle-state";
+ entry-latency-us = <4000>;
+ exit-latency-us = <4000>;
+ min-residency-us = <10000>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x00010000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ gic: interrupt-controller@14000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ redistributor-stride = <0x0 0x20000>; /* 128KB stride */
+ #redistributor-regions = <1>;
+ interrupt-controller;
+ reg = <0x0 0x14000000 0 0x20000>, /* GICD */
+ <0x0 0x14040000 0 0x100000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ funnel@10001000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x10001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_soc_out_port: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ funnel_soc_in_port: endpoint {
+ remote-endpoint =
+ <&funnel_ca55_out_port>;
+ };
+ };
+ };
+ };
+
+ etb@10003000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x10003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint =
+ <&funnel_soc_out_port>;
+ };
+ };
+ };
+ };
+
+ funnel@12001000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x12001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_little_out_port: endpoint {
+ remote-endpoint =
+ <&etf_little_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_little_in_port0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_little_in_port1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel_little_in_port2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ funnel_little_in_port3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+ };
+
+ etf@12002000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x12002000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etf_little_out: endpoint {
+ remote-endpoint =
+ <&funnel_ca55_in_port0>;
+ };
+ };
+ };
+
+ in-port {
+ port {
+ etf_little_in: endpoint {
+ remote-endpoint =
+ <&funnel_little_out_port>;
+ };
+ };
+ };
+ };
+
+ etf@12003000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x12003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etf_big_out: endpoint {
+ remote-endpoint =
+ <&funnel_ca55_in_port1>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ etf_big_in: endpoint {
+ remote-endpoint =
+ <&funnel_big_out_port>;
+ };
+ };
+ };
+ };
+
+ funnel@12004000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x12004000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_ca55_out_port: endpoint {
+ remote-endpoint =
+ <&funnel_soc_in_port>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_ca55_in_port0: endpoint {
+ remote-endpoint =
+ <&etf_little_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_ca55_in_port1: endpoint {
+ remote-endpoint =
+ <&etf_big_out>;
+ };
+ };
+ };
+ };
+
+ funnel@12005000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0x12005000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ funnel_big_out_port: endpoint {
+ remote-endpoint =
+ <&etf_big_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_big_in_port0: endpoint {
+ remote-endpoint = <&etm4_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_big_in_port1: endpoint {
+ remote-endpoint = <&etm5_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel_big_in_port2: endpoint {
+ remote-endpoint = <&etm6_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ funnel_big_in_port3: endpoint {
+ remote-endpoint = <&etm7_out>;
+ };
+ };
+ };
+ };
+
+ etm@13040000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13040000 0 0x1000>;
+ cpu = <&CPU0>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port0>;
+ };
+ };
+ };
+ };
+
+ etm@13140000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13140000 0 0x1000>;
+ cpu = <&CPU1>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port1>;
+ };
+ };
+ };
+ };
+
+ etm@13240000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13240000 0 0x1000>;
+ cpu = <&CPU2>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port2>;
+ };
+ };
+ };
+ };
+
+ etm@13340000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13340000 0 0x1000>;
+ cpu = <&CPU3>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&funnel_little_in_port3>;
+ };
+ };
+ };
+ };
+
+ etm@13440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13440000 0 0x1000>;
+ cpu = <&CPU4>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port0>;
+ };
+ };
+ };
+ };
+
+ etm@13540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13540000 0 0x1000>;
+ cpu = <&CPU5>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port1>;
+ };
+ };
+ };
+ };
+
+ etm@13640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13640000 0 0x1000>;
+ cpu = <&CPU6>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port2>;
+ };
+ };
+ };
+ };
+
+ etm@13740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x13740000 0 0x1000>;
+ cpu = <&CPU7>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&funnel_big_in_port3>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
new file mode 100644
index 000000000000..0222128b10f7
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ apb@70000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x70000000 0x10000000>;
+
+ uart0: serial@0 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@100000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x100000 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart2: serial@200000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x200000 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart3: serial@300000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x300000 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart4: serial@400000 {
+ compatible = "sprd,sc9863a-uart",
+ "sprd,sc9836-uart";
+ reg = <0x400000 0x100>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ext_26m: ext-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "ext-26m";
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
new file mode 100644
index 000000000000..5c32c1596337
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+ model = "Spreadtrum SP9863A-1H10 Board";
+
+ compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ bootargs = "earlycon";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index efb24579922c..e5df20a2d2f9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -51,17 +51,6 @@
};
};
- secure_proxy_main: mailbox@32c00000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x32c00000 0x00 0x100000>,
- <0x00 0x32400000 0x00 0x100000>,
- <0x00 0x32800000 0x00 0x100000>;
- interrupt-names = "rx_011";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- };
-
serdes0: serdes@900000 {
compatible = "ti,phy-am654-serdes";
reg = <0x0 0x900000 0x0 0x2000>;
@@ -385,11 +374,15 @@
ti,sci-rm-range-girq = <0x1>;
};
- cbass_main_navss: interconnect0 {
- compatible = "simple-bus";
+ main_navss {
+ compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-coherent;
+ dma-ranges;
+
+ ti,sci-dev-id = <118>;
intr_main_navss: interrupt-controller1 {
compatible = "ti,sci-intr";
@@ -414,6 +407,17 @@
ti,sci-rm-range-global-event = <0x1>;
};
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
hwspinlock: spinlock@30e00000 {
compatible = "ti,am654-hwspinlock";
reg = <0x00 0x30e00000 0x00 0x1000>;
@@ -527,6 +531,41 @@
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
};
+
+ ringacc: ringacc@3c000000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <818>;
+ ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+ ti,dma-ring-reset-quirk;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <187>;
+ msi-parent = <&inta_main_udmass>;
+ };
+
+ main_udmap: dma-controller@31150000 {
+ compatible = "ti,am654-navss-main-udmap";
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x100000>,
+ <0x0 0x35000000 0x0 0x100000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&inta_main_udmass>;
+ #dma-cells = <1>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <188>;
+ ti,ringacc = <&ringacc>;
+
+ ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+ <0x2>; /* TX_CHAN */
+ ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+ <0x5>; /* RX_CHAN */
+ ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+ };
};
main_gpio0: main_gpio0@600000 {
@@ -624,4 +663,83 @@
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
+
+ mcasp0: mcasp@2b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 104 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 105 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 106 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ cal: cal@6f03000 {
+ compatible = "ti,am654-cal";
+ reg = <0x0 0x06f03000 0x0 0x400>,
+ <0x0 0x06f03800 0x0 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0";
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0x40c0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 2 0>;
+ power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 7bdf5342f58f..92629cbdc184 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -6,6 +6,14 @@
*/
&cbass_mcu {
+ mcu_conf: scm_conf@40f00000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x40f00000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40f00000 0x20000>;
+ };
+
mcu_uart0: serial@40a00000 {
compatible = "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
@@ -95,4 +103,88 @@
compatible = "ti,am654-adc", "ti,am3359-adc";
};
};
+
+ mcu_navss {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+
+ ti,sci-dev-id = <119>;
+
+ mcu_ringacc: ringacc@2b800000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <286>;
+ ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+ ti,dma-ring-reset-quirk;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <195>;
+ msi-parent = <&inta_main_udmass>;
+ };
+
+ mcu_udmap: dma-controller@285c0000 {
+ compatible = "ti,am654-navss-mcu-udmap";
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&inta_main_udmass>;
+ #dma-cells = <1>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <194>;
+ ti,ringacc = <&mcu_ringacc>;
+
+ ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+ <0x2>; /* TX_CHAN */
+ ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
+ <0x4>; /* RX_CHAN */
+ ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
+ };
+ };
+
+ fss: fss@47000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x0 0x47040000 0x0 0x100>,
+ <0x5 0x00000000 0x1 0x0000000>;
+ interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 248 0>;
+ assigned-clocks = <&k3_clks 248 0>;
+ assigned-clock-parents = <&k3_clks 248 2>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ospi1: spi@47050000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x0 0x47050000 0x0 0x100>,
+ <0x7 0x00000000 0x1 0x00000000>;
+ interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 249 6>;
+ power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index 6dfccd5d56c8..aea36e29dd32 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -74,13 +74,18 @@
/* MCUSS Range */
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
<0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
- <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
cbass_mcu: interconnect@28380000 {
compatible = "simple-bus";
@@ -88,13 +93,17 @@
#size-cells = <2>;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
<0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
- <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
cbass_wakeup: interconnect@42040000 {
compatible = "simple-bus";
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 8a85b482ad31..1700996800eb 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -53,6 +53,12 @@
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
};
};
+
+ clk_ov5640_fixed: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
};
&wkup_pmx0 {
@@ -69,6 +75,29 @@
AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
>;
};
+
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
+ AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */
+ AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */
+ AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */
+ AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */
+ AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */
+ AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */
+ AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */
+ AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
+ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+ >;
+ };
+
+ wkup_pca554_default: wkup_pca554_default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+
+ >;
+ };
};
&main_pmx0 {
@@ -164,6 +193,12 @@
reg = <0x39>;
gpio-controller;
#gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_pca554_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
@@ -184,6 +219,23 @@
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
+
+ ov5640@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
};
&main_i2c2 {
@@ -339,3 +391,31 @@
&mailbox0_cluster11 {
status = "disabled";
};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&csi2_0 {
+ csi2_phy0: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2a3cd6174504..7a5c3d4adadd 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -67,6 +67,46 @@
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
};
+
+ main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+ >;
+ };
+
+ main_i2c0_pins_default: main-i2c0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+ >;
+ };
+
+ main_i2c1_pins_default: main-i2c1-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+ >;
+ };
+
+ main_i2c3_pins_default: main-i2c3-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+ >;
+ };
+
+ main_i2c6_pins_default: main-i2c6-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+ >;
+ };
+
+ main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+ >;
+ };
};
&wkup_pmx0 {
@@ -75,6 +115,19 @@
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
>;
};
+
+ mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+ J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+ J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+ J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+ J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+ J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+ J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+ >;
+ };
};
&wkup_uart0 {
@@ -279,3 +332,100 @@
dr_mode = "host";
maximum-speed = "high-speed";
};
+
+&ospi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&tscadc0 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&tscadc1 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ exp1: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ exp2: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ exp4: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c3_pins_default>;
+ clock-frequency = <400000>;
+
+ exp3: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c6_pins_default>;
+ clock-frequency = <400000>;
+
+ exp5: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 1e4c2b78d66d..0b9d14b838a1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -40,16 +40,6 @@
};
};
- smmu0: smmu@36600000 {
- compatible = "arm,smmu-v3";
- reg = <0x0 0x36600000 0x0 0x100000>;
- interrupt-parent = <&gic500>;
- interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "eventq", "gerror";
- #iommu-cells = <1>;
- };
-
main_gpio_intr: interrupt-controller0 {
compatible = "ti,sci-intr";
ti,intr-trigger-type = <1>;
@@ -61,11 +51,15 @@
ti,sci-rm-range-girq = <0x1>;
};
- cbass_main_navss: interconnect0 {
- compatible = "simple-bus";
+ main_navss {
+ compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-coherent;
+ dma-ranges;
+
+ ti,sci-dev-id = <199>;
main_navss_intr: interrupt-controller1 {
compatible = "ti,sci-intr";
@@ -90,6 +84,27 @@
ti,sci-rm-range-global-event = <0xd>;
};
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ smmu0: smmu@36600000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0x36600000 0x0 0x100000>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror";
+ #iommu-cells = <1>;
+ };
+
hwspinlock: spinlock@30e00000 {
compatible = "ti,am654-hwspinlock";
reg = <0x00 0x30e00000 0x00 0x1000>;
@@ -203,17 +218,42 @@
ti,mbox-num-fifos = <16>;
interrupt-parent = <&main_navss_intr>;
};
- };
- secure_proxy_main: mailbox@32c00000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x32c00000 0x00 0x100000>,
- <0x00 0x32400000 0x00 0x100000>,
- <0x00 0x32800000 0x00 0x100000>;
- interrupt-names = "rx_011";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ main_ringacc: ringacc@3c000000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <1024>;
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <211>;
+ msi-parent = <&main_udmass_inta>;
+ };
+
+ main_udmap: dma-controller@31150000 {
+ compatible = "ti,j721e-navss-main-udmap";
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x100000>,
+ <0x0 0x35000000 0x0 0x100000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <1>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <212>;
+ ti,ringacc = <&main_ringacc>;
+
+ ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+ <0x0f>, /* TX_HCHAN */
+ <0x10>; /* TX_UHCHAN */
+ ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+ <0x0b>, /* RX_HCHAN */
+ <0x0c>; /* RX_UHCHAN */
+ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+ };
};
main_pmx0: pinmux@11c000 {
@@ -596,4 +636,331 @@
dr_mode = "otg";
};
};
+
+ main_i2c0: i2c@2000000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2000000 0x0 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 187 0>;
+ power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+ };
+
+ main_i2c1: i2c@2010000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2010000 0x0 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 188 0>;
+ power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c2: i2c@2020000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2020000 0x0 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 189 0>;
+ power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c3: i2c@2030000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2030000 0x0 0x100>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 190 0>;
+ power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c4: i2c@2040000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2040000 0x0 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 191 0>;
+ power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c5: i2c@2050000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2050000 0x0 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 192 0>;
+ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c6: i2c@2060000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2060000 0x0 0x100>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 193 0>;
+ power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ ufs_wrapper: ufs-wrapper@4e80000 {
+ compatible = "ti,j721e-ufs";
+ reg = <0x0 0x4e80000 0x0 0x100>;
+ power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 277 1>;
+ assigned-clocks = <&k3_clks 277 1>;
+ assigned-clock-parents = <&k3_clks 277 4>;
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufs@4e84000 {
+ compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+ reg = <0x0 0x4e84000 0x0 0x10000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+ clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+ clock-names = "core_clk", "phy_clk", "ref_clk";
+ dma-coherent;
+ };
+ };
+
+ mcasp0: mcasp@2b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 174 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 175 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 176 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp3: mcasp@2b30000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b30000 0x0 0x2000>,
+ <0x0 0x02b38000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 177 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp4: mcasp@2b40000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b40000 0x0 0x2000>,
+ <0x0 0x02b48000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 178 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp5: mcasp@2b50000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b50000 0x0 0x2000>,
+ <0x0 0x02b58000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 179 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp6: mcasp@2b60000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b60000 0x0 0x2000>,
+ <0x0 0x02b68000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 180 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp7: mcasp@2b70000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b70000 0x0 0x2000>,
+ <0x0 0x02b78000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 181 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp8: mcasp@2b80000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b80000 0x0 0x2000>,
+ <0x0 0x02b88000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 182 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp9: mcasp@2b90000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b90000 0x0 0x2000>,
+ <0x0 0x02b98000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 183 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp10: mcasp@2ba0000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02ba0000 0x0 0x2000>,
+ <0x0 0x02ba8000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 184 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp11: mcasp@2bb0000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02bb0000 0x0 0x2000>,
+ <0x0 0x02bb8000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 185 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 555dc7b7aedc..16c874bfd49a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -121,4 +121,153 @@
clocks = <&k3_clks 114 0>;
clock-names = "gpio";
};
+
+ mcu_i2c0: i2c@40b00000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x40b00000 0x0 0x100>;
+ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 194 0>;
+ power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ mcu_i2c1: i2c@40b10000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x40b10000 0x0 0x100>;
+ interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 195 0>;
+ power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ wkup_i2c0: i2c@42120000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x42120000 0x0 0x100>;
+ interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 197 0>;
+ power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+ };
+
+ fss: fss@47000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x47000000 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi";
+ reg = <0x0 0x47040000 0x0 0x100>,
+ <0x5 0x00000000 0x1 0x0000000>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 103 0>;
+ assigned-clocks = <&k3_clks 103 0>;
+ assigned-clock-parents = <&k3_clks 103 2>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ospi1: spi@47050000 {
+ compatible = "ti,am654-ospi";
+ reg = <0x0 0x47050000 0x0 0x100>,
+ <0x7 0x00000000 0x1 0x00000000>;
+ interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 104 0>;
+ power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ tscadc0: tscadc@40200000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40200000 0x0 0x1000>;
+ interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 0 1>;
+ assigned-clocks = <&k3_clks 0 3>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
+
+ tscadc1: tscadc@40210000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 1 1>;
+ assigned-clocks = <&k3_clks 1 3>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
+
+ mcu_navss {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+
+ ti,sci-dev-id = <232>;
+
+ mcu_ringacc: ringacc@2b800000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <286>;
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <235>;
+ msi-parent = <&main_udmass_inta>;
+ };
+
+ mcu_udmap: dma-controller@285c0000 {
+ compatible = "ti,j721e-navss-mcu-udmap";
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <1>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <236>;
+ ti,ringacc = <&mcu_ringacc>;
+
+ ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+ <0x0f>; /* TX_HCHAN */
+ ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+ <0x0b>; /* RX_HCHAN */
+ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 1884fc70148f..7680109ca60a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -27,3 +27,48 @@
};
};
};
+
+&wkup_pmx0 {
+ wkup_i2c0_pins_default: wkup_i2c0_pins_default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+ >;
+ };
+
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */
+ J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */
+ J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */
+ J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */
+ J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */
+ J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */
+ J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */
+ J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */
+ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */
+ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+ >;
+ };
+};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index ee5470edb435..027bd1febafa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -130,7 +130,7 @@
<0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
<0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
- <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
<0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
<0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
<0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
new file mode 100644
index 000000000000..9868ca15dfc5
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+/ {
+ pss_ref_clk: pss_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33333333>;
+ };
+
+ video_clk: video_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ pss_alt_ref_clk: pss_alt_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ gt_crx_ref_clk: gt_crx_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <108000000>;
+ };
+
+ aux_ref_clk: aux_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+};
+
+&can0 {
+ clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&can1 {
+ clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&cpu0 {
+ clocks = <&zynqmp_clk ACPU>;
+};
+
+&fpd_dma_chan1 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan2 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan3 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan4 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan5 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan6 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan7 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan8 {
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan1 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan2 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan3 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan4 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan5 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan6 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan7 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan8 {
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gem0 {
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+ <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+ <&zynqmp_clk GEM_TSU>;
+ clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem1 {
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+ <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+ <&zynqmp_clk GEM_TSU>;
+ clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem2 {
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+ <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+ <&zynqmp_clk GEM_TSU>;
+ clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem3 {
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+ <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+ <&zynqmp_clk GEM_TSU>;
+ clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gpio {
+ clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&i2c0 {
+ clocks = <&zynqmp_clk I2C0_REF>;
+};
+
+&i2c1 {
+ clocks = <&zynqmp_clk I2C1_REF>;
+};
+
+&pcie {
+ clocks = <&zynqmp_clk PCIE_REF>;
+};
+
+&sata {
+ clocks = <&zynqmp_clk SATA_REF>;
+};
+
+&sdhci0 {
+ clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sdhci1 {
+ clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi0 {
+ clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi1 {
+ clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc0 {
+ clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc1 {
+ clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc2 {
+ clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc3 {
+ clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart0 {
+ clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart1 {
+ clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&usb0 {
+ clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&usb1 {
+ clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&watchdog0 {
+ clocks = <&zynqmp_clk WDT>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
deleted file mode 100644
index 306ad2157c98..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Clock specification for Xilinx ZynqMP
- *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- */
-
-/ {
- clk100: clk100 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- };
-
- clk125: clk125 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- };
-
- clk200: clk200 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- clk250: clk250 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <250000000>;
- };
-
- clk300: clk300 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <300000000>;
- };
-
- clk600: clk600 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <600000000>;
- };
-
- dp_aclk: clock0 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- clock-accuracy = <100>;
- };
-
- dp_aud_clk: clock1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- clock-accuracy = <100>;
- };
-
- dpdma_clk: dpdma-clk {
- compatible = "fixed-clock";
- #clock-cells = <0x0>;
- clock-frequency = <533000000>;
- };
-
- drm_clock: drm-clock {
- compatible = "fixed-clock";
- #clock-cells = <0x0>;
- clock-frequency = <262750000>;
- clock-accuracy = <0x64>;
- };
-};
-
-&can0 {
- clocks = <&clk100 &clk100>;
-};
-
-&can1 {
- clocks = <&clk100 &clk100>;
-};
-
-&fpd_dma_chan1 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan1 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan2 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan3 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan4 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan5 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan6 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan7 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan8 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
- clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem1 {
- clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem2 {
- clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem3 {
- clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gpio {
- clocks = <&clk100>;
-};
-
-&i2c0 {
- clocks = <&clk100>;
-};
-
-&i2c1 {
- clocks = <&clk100>;
-};
-
-&sata {
- clocks = <&clk250>;
-};
-
-&sdhci0 {
- clocks = <&clk200 &clk200>;
-};
-
-&sdhci1 {
- clocks = <&clk200 &clk200>;
-};
-
-&spi0 {
- clocks = <&clk200 &clk200>;
-};
-
-&spi1 {
- clocks = <&clk200 &clk200>;
-};
-
-&uart0 {
- clocks = <&clk100 &clk100>;
-};
-
-&uart1 {
- clocks = <&clk100 &clk100>;
-};
-
-&usb0 {
- clocks = <&clk250>, <&clk250>;
-};
-
-&usb1 {
- clocks = <&clk250>, <&clk250>;
-};
-
-&watchdog0 {
- clocks = <&clk250>;
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
index 0f7b4cf6078e..2e05fa416955 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZC1232
*
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
/ {
model = "ZynqMP ZC1232 RevA";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
index 9092828f92ec..3d0aaa02f184 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZC1254
*
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
* Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -11,7 +11,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
/ {
model = "ZynqMP ZC1254 RevA";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
index 4f404c580eec..66a90483b004 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZC1275
*
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
* Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -11,7 +11,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
/ {
model = "ZynqMP ZC1275 RevA";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index 9a3e39d1294f..69f6e4610739 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP zc1751-xm015-dc1
*
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -73,7 +73,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@0 {
+ phy0: ethernet-phy@0 {
reg = <0>;
};
};
@@ -128,4 +128,5 @@
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
+ dr_mode = "host";
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 2421ec71a201..4a86efa32d68 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP zc1751-xm016-dc2
*
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -84,7 +84,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@5 {
+ phy0: ethernet-phy@5 {
reg = <5>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
@@ -123,7 +123,7 @@
status = "okay";
num-cs = <1>;
- spi0_flash0: flash0@0 {
+ spi0_flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25wf080", "jedec,spi-nor";
@@ -141,7 +141,7 @@
status = "okay";
num-cs = <1>;
- spi1_flash0: flash0@0 {
+ spi1_flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
@@ -158,6 +158,7 @@
/* ULPI SMSC USB3320 */
&usb1 {
status = "okay";
+ dr_mode = "host";
};
&uart0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 7a49deeae647..4ea6ef5a7f2b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP zc1751-xm017-dc3
*
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
/ {
model = "ZynqMP zc1751-xm017-dc3 RevA";
@@ -73,7 +73,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@0 { /* VSC8211 */
+ phy0: ethernet-phy@0 { /* VSC8211 */
reg = <0>;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 54c7b4f1d1e4..2366cd9f091a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP zc1751-xm018-dc4
*
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
/ {
model = "ZynqMP zc1751-xm018-dc4";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index b8b5ff13818d..41934e3525c6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP zc1751-xm019-dc5
*
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
*
* Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
* Michal Simek <michal.simek@xilinx.com>
@@ -11,7 +11,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -74,7 +74,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@0 {
+ phy0: ethernet-phy@0 {
reg = <0>;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index e5699d0d91e4..d60110ad8367 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZCU100 revC
*
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
* Nathalie Chan King Choy
@@ -11,7 +11,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
@@ -103,6 +103,11 @@
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
post-power-on-delay-ms = <10>;
};
+
+ ina226 {
+ compatible = "iio-hwmon";
+ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+ };
};
&dcc {
@@ -191,8 +196,9 @@
#size-cells = <0>;
reg = <5>;
/* PS_PMBUS */
- ina226@40 { /* u35 */
+ u35: ina226@40 { /* u35 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <10000>;
/* MIO31 is alert which should be routed to PMUFW */
@@ -226,7 +232,6 @@
&sdhci0 {
status = "okay";
no-1-8-v;
- broken-cd; /* CD has to be enabled by default */
disable-wp;
};
@@ -251,11 +256,13 @@
&spi0 { /* Low Speed connector */
status = "okay";
label = "LS-SPI0";
+ num-cs = <1>;
};
&spi1 { /* High Speed connector */
status = "okay";
label = "HS-SPI1";
+ num-cs = <1>;
};
&uart0 {
@@ -274,11 +281,13 @@
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
+ dr_mode = "peripheral";
};
/* ULPI SMSC USB3320 */
&usb1 {
status = "okay";
+ dr_mode = "host";
};
&watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 2a3b66547c6d..4f801721564f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZCU102 RevA
*
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@@ -59,6 +59,79 @@
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u76 {
+ compatible = "iio-hwmon";
+ io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u78 {
+ compatible = "iio-hwmon";
+ io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+ };
+ ina226-u87 {
+ compatible = "iio-hwmon";
+ io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+ };
+ ina226-u85 {
+ compatible = "iio-hwmon";
+ io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+ };
+ ina226-u86 {
+ compatible = "iio-hwmon";
+ io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+ };
+ ina226-u93 {
+ compatible = "iio-hwmon";
+ io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+ };
+ ina226-u88 {
+ compatible = "iio-hwmon";
+ io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+ };
+ ina226-u15 {
+ compatible = "iio-hwmon";
+ io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+ };
+ ina226-u92 {
+ compatible = "iio-hwmon";
+ io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
+ ina226-u81 {
+ compatible = "iio-hwmon";
+ io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+ };
+ ina226-u80 {
+ compatible = "iio-hwmon";
+ io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+ };
+ ina226-u84 {
+ compatible = "iio-hwmon";
+ io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+ };
+ ina226-u16 {
+ compatible = "iio-hwmon";
+ io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u74 {
+ compatible = "iio-hwmon";
+ io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+ };
+ ina226-u75 {
+ compatible = "iio-hwmon";
+ io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+ };
};
&can1 {
@@ -105,7 +178,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@21 {
+ phy0: ethernet-phy@21 {
reg = <21>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
@@ -125,21 +198,11 @@
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
- gpio-controller;
+ gpio-controller; /* IRQ not connected */
#gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - PS_GTR_LAN_SEL0
- * 1 - PS_GTR_LAN_SEL1
- * 2 - PS_GTR_LAN_SEL2
- * 3 - PS_GTR_LAN_SEL3
- * 4 - PCI_CLK_DIR_SEL
- * 5 - IIC_MUX_RESET_B
- * 6 - GEM3_EXP_RESET_B
- * 7, 10 - 17 - not connected
- */
-
+ gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+ "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+ "", "", "", "", "", "", "", "", "";
gtr-sel0 {
gpio-hog;
gpios = <0 0>;
@@ -169,27 +232,12 @@
tca6416_u61: gpio@21 {
compatible = "ti,tca6416";
reg = <0x21>;
- gpio-controller;
+ gpio-controller; /* IRQ not connected */
#gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - VCCPSPLL_EN
- * 1 - MGTRAVCC_EN
- * 2 - MGTRAVTT_EN
- * 3 - VCCPSDDRPLL_EN
- * 4 - MIO26_PMU_INPUT_LS
- * 5 - PL_PMBUS_ALERT
- * 6 - PS_PMBUS_ALERT
- * 7 - MAXIM_PMBUS_ALERT
- * 10 - PL_DDR4_VTERM_EN
- * 11 - PL_DDR4_VPP_2V5_EN
- * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
- * 13 - PS_DIMM_SUSPEND_EN
- * 14 - PS_DDR4_VTERM_EN
- * 15 - PS_DDR4_VPP_2V5_EN
- * 16 - 17 - not connected
- */
+ gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+ "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+ "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+ "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
};
i2c-mux@75 { /* u60 */
@@ -202,53 +250,73 @@
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
- ina226@40 { /* u76 */
+ u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u76";
reg = <0x40>;
shunt-resistor = <5000>;
};
- ina226@41 { /* u77 */
+ u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u78 */
+ u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u78";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u87 */
+ u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u87";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u85 */
+ u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u85";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u86 */
+ u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u86";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u93 */
+ u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u93";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u88 */
+ u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u88";
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u15 */
+ u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u15";
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u92 */
+ u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u92";
reg = <0x4b>;
shunt-resistor = <5000>;
};
@@ -258,43 +326,59 @@
#size-cells = <0>;
reg = <1>;
/* PL_PMBUS */
- ina226@40 { /* u79 */
+ u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u81 */
+ u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u81";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u80 */
+ u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u80";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u84 */
+ u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u84";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u16 */
+ u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u16";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u65 */
+ u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u74 */
+ u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u74";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u75 */
+ u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u75";
reg = <0x47>;
shunt-resistor = <5000>;
};
@@ -414,6 +498,7 @@
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -427,6 +512,7 @@
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
@@ -540,6 +626,7 @@
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
+ dr_mode = "host";
};
&watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
index 1780ed237daf..d9ad8a4b20d3 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
@@ -16,7 +16,7 @@
&gem3 {
phy-handle = <&phyc>;
- phyc: phy@c {
+ phyc: ethernet-phy@c {
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
@@ -24,7 +24,7 @@
ti,dp83867-rxctrl-strap-quirk;
};
/* Cleanup from RevA */
- /delete-node/ phy@21;
+ /delete-node/ ethernet-phy@21;
};
/* Fix collision with u61 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 8f456146409f..7a4614e3f5fa 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZCU104
*
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -50,7 +50,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@c {
+ phy0: ethernet-phy@c {
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
@@ -118,9 +118,9 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- tca6416_u97: gpio@21 {
+ tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
- reg = <0x21>;
+ reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
/*
@@ -189,6 +189,7 @@
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
+ dr_mode = "host";
};
&watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 93ce7eb81498..6e9efe233838 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZCU106
*
- * (C) Copyright 2016, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@@ -59,6 +59,79 @@
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u76 {
+ compatible = "iio-hwmon";
+ io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u78 {
+ compatible = "iio-hwmon";
+ io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+ };
+ ina226-u87 {
+ compatible = "iio-hwmon";
+ io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+ };
+ ina226-u85 {
+ compatible = "iio-hwmon";
+ io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+ };
+ ina226-u86 {
+ compatible = "iio-hwmon";
+ io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+ };
+ ina226-u93 {
+ compatible = "iio-hwmon";
+ io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+ };
+ ina226-u88 {
+ compatible = "iio-hwmon";
+ io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+ };
+ ina226-u15 {
+ compatible = "iio-hwmon";
+ io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+ };
+ ina226-u92 {
+ compatible = "iio-hwmon";
+ io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
+ ina226-u81 {
+ compatible = "iio-hwmon";
+ io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+ };
+ ina226-u80 {
+ compatible = "iio-hwmon";
+ io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+ };
+ ina226-u84 {
+ compatible = "iio-hwmon";
+ io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+ };
+ ina226-u16 {
+ compatible = "iio-hwmon";
+ io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u74 {
+ compatible = "iio-hwmon";
+ io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+ };
+ ina226-u75 {
+ compatible = "iio-hwmon";
+ io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+ };
};
&can1 {
@@ -106,7 +179,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@c {
+ phy0: ethernet-phy@c {
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
@@ -177,53 +250,73 @@
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
- ina226@40 { /* u76 */
+ u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u76";
reg = <0x40>;
shunt-resistor = <5000>;
};
- ina226@41 { /* u77 */
+ u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u78 */
+ u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u78";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u87 */
+ u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u87";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u85 */
+ u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u85";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u86 */
+ u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u86";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u93 */
+ u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u93";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u88 */
+ u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u88";
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u15 */
+ u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u15";
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u92 */
+ u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u92";
reg = <0x4b>;
shunt-resistor = <5000>;
};
@@ -233,43 +326,59 @@
#size-cells = <0>;
reg = <1>;
/* PL_PMBUS */
- ina226@40 { /* u79 */
+ u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u81 */
+ u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u81";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u80 */
+ u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u80";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u84 */
+ u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u84";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u16 */
+ u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u16";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u65 */
+ u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u74 */
+ u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u74";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u75 */
+ u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u75";
reg = <0x47>;
shunt-resistor = <5000>;
};
@@ -388,6 +497,7 @@
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -401,6 +511,7 @@
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
@@ -514,6 +625,7 @@
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
+ dr_mode = "host";
};
&watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 8bb0001a026f..2e92634c77f9 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZCU111
*
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@@ -59,6 +59,63 @@
linux,default-trigger = "heartbeat";
};
};
+
+ ina226-u67 {
+ compatible = "iio-hwmon";
+ io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+ };
+ ina226-u59 {
+ compatible = "iio-hwmon";
+ io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+ };
+ ina226-u61 {
+ compatible = "iio-hwmon";
+ io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+ };
+ ina226-u60 {
+ compatible = "iio-hwmon";
+ io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+ };
+ ina226-u64 {
+ compatible = "iio-hwmon";
+ io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+ };
+ ina226-u69 {
+ compatible = "iio-hwmon";
+ io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+ };
+ ina226-u66 {
+ compatible = "iio-hwmon";
+ io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u63 {
+ compatible = "iio-hwmon";
+ io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+ };
+ ina226-u3 {
+ compatible = "iio-hwmon";
+ io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+ };
+ ina226-u71 {
+ compatible = "iio-hwmon";
+ io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u73 {
+ compatible = "iio-hwmon";
+ io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
};
&dcc {
@@ -101,7 +158,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@c {
+ phy0: ethernet-phy@c {
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
@@ -152,73 +209,101 @@
reg = <0>;
/* PS_PMBUS */
/* PMBUS_ALERT done via pca9544 */
- ina226@40 { /* u67 */
+ u67: ina226@40 { /* u67 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u67";
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u59 */
+ u59: ina226@41 { /* u59 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u59";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u61 */
+ u61: ina226@42 { /* u61 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u61";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u60 */
+ u60: ina226@43 { /* u60 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u60";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u64 */
+ u64: ina226@45 { /* u64 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u64";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u69 */
+ u69: ina226@46 { /* u69 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u69";
reg = <0x46>;
shunt-resistor = <2000>;
};
- ina226@47 { /* u66 */
+ u66: ina226@47 { /* u66 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u66";
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@48 { /* u65 */
+ u65: ina226@48 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x48>;
shunt-resistor = <5000>;
};
- ina226@49 { /* u63 */
+ u63: ina226@49 { /* u63 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u63";
reg = <0x49>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u3 */
+ u3: ina226@4a { /* u3 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u3";
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u71 */
+ u71: ina226@4b { /* u71 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u71";
reg = <0x4b>;
shunt-resistor = <5000>;
};
- ina226@4c { /* u77 */
+ u77: ina226@4c { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x4c>;
shunt-resistor = <5000>;
};
- ina226@4d { /* u73 */
+ u73: ina226@4d { /* u73 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u73";
reg = <0x4d>;
shunt-resistor = <5000>;
};
- ina226@4e { /* u79 */
+ u79: ina226@4e { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x4e>;
shunt-resistor = <5000>;
};
@@ -304,6 +389,7 @@
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -316,7 +402,8 @@
reg = <0x5d>;
temperature-stability = <50>;
factory-fout = <156250000>;
- clock-frequency = <148500000>;
+ clock-frequency = <156250000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
@@ -440,4 +527,5 @@
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
+ dr_mode = "host";
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 3c731e73903a..26d926eb1431 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP
*
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ * (C) Copyright 2014 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
@@ -12,6 +12,8 @@
* the License, or (at your option) any later version.
*/
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
@@ -118,8 +120,31 @@
firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
+ #power-domain-cells = <1>;
method = "smc";
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupt-parent = <&gic>;
+ interrupts = <0 35 4>;
+ };
+
+ zynqmp_clk: clock-controller {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>,
+ <&video_clk>,
+ <&pss_alt_ref_clk>,
+ <&aux_ref_clk>,
+ <&gt_crx_ref_clk>;
+ clock-names = "pss_ref_clk",
+ "video_clk",
+ "pss_alt_ref_clk",
+ "aux_ref_clk",
+ "gt_crx_ref_clk";
+ };
+
nvmem_firmware {
compatible = "xlnx,zynqmp-nvmem-fw";
#address-cells = <1>;
@@ -187,6 +212,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_0>;
};
can1: can@ff070000 {
@@ -198,6 +224,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_1>;
};
cci: cci@fd6e0000 {
@@ -228,6 +255,7 @@
interrupts = <0 124 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan2: dma@fd510000 {
@@ -238,6 +266,7 @@
interrupts = <0 125 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan3: dma@fd520000 {
@@ -248,6 +277,7 @@
interrupts = <0 126 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan4: dma@fd530000 {
@@ -258,6 +288,7 @@
interrupts = <0 127 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan5: dma@fd540000 {
@@ -268,6 +299,7 @@
interrupts = <0 128 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan6: dma@fd550000 {
@@ -278,6 +310,7 @@
interrupts = <0 129 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan7: dma@fd560000 {
@@ -288,6 +321,7 @@
interrupts = <0 130 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan8: dma@fd570000 {
@@ -298,6 +332,7 @@
interrupts = <0 131 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
/* LPDDMA default allows only secured access. inorder to enable
@@ -312,6 +347,7 @@
interrupts = <0 77 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan2: dma@ffa90000 {
@@ -322,6 +358,7 @@
interrupts = <0 78 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan3: dma@ffaa0000 {
@@ -332,6 +369,7 @@
interrupts = <0 79 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan4: dma@ffab0000 {
@@ -342,6 +380,7 @@
interrupts = <0 80 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan5: dma@ffac0000 {
@@ -352,6 +391,7 @@
interrupts = <0 81 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan6: dma@ffad0000 {
@@ -362,6 +402,7 @@
interrupts = <0 82 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan7: dma@ffae0000 {
@@ -372,6 +413,7 @@
interrupts = <0 83 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan8: dma@ffaf0000 {
@@ -382,6 +424,7 @@
interrupts = <0 84 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
mc: memory-controller@fd070000 {
@@ -400,6 +443,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_0>;
};
gem1: ethernet@ff0c0000 {
@@ -411,6 +455,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_1>;
};
gem2: ethernet@ff0d0000 {
@@ -422,6 +467,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_2>;
};
gem3: ethernet@ff0e0000 {
@@ -433,6 +479,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_3>;
};
gpio: gpio@ff0a0000 {
@@ -445,6 +492,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
+ power-domains = <&zynqmp_firmware PD_GPIO>;
};
i2c0: i2c@ff020000 {
@@ -455,6 +503,7 @@
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_0>;
};
i2c1: i2c@ff030000 {
@@ -465,6 +514,7 @@
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_1>;
};
pcie: pcie@fd0e0000 {
@@ -496,6 +546,7 @@
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ power-domains = <&zynqmp_firmware PD_PCIE>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
@@ -519,24 +570,31 @@
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
+ power-domains = <&zynqmp_firmware PD_SATA>;
};
sdhci0: mmc@ff160000 {
- compatible = "arasan,sdhci-8.9a";
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #clock-cells = <1>;
+ clock-output-names = "clk_out_sd0", "clk_in_sd0";
+ power-domains = <&zynqmp_firmware PD_SD_0>;
};
sdhci1: mmc@ff170000 {
- compatible = "arasan,sdhci-8.9a";
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #clock-cells = <1>;
+ clock-output-names = "clk_out_sd1", "clk_in_sd1";
+ power-domains = <&zynqmp_firmware PD_SD_1>;
};
smmu: smmu@fd800000 {
@@ -561,6 +619,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_0>;
};
spi1: spi@ff050000 {
@@ -572,6 +631,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_1>;
};
ttc0: timer@ff110000 {
@@ -581,6 +641,7 @@
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_0>;
};
ttc1: timer@ff120000 {
@@ -590,6 +651,7 @@
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_1>;
};
ttc2: timer@ff130000 {
@@ -599,6 +661,7 @@
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_2>;
};
ttc3: timer@ff140000 {
@@ -608,6 +671,7 @@
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_3>;
};
uart0: serial@ff000000 {
@@ -617,6 +681,7 @@
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_0>;
};
uart1: serial@ff010000 {
@@ -626,6 +691,7 @@
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_1>;
};
usb0: usb@fe200000 {
@@ -635,6 +701,7 @@
interrupts = <0 65 4>;
reg = <0x0 0xfe200000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_USB_0>;
};
usb1: usb@fe300000 {
@@ -644,6 +711,7 @@
interrupts = <0 70 4>;
reg = <0x0 0xfe300000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_USB_1>;
};
watchdog0: watchdog@fd4d0000 {
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index b4a95cbbda98..6e71591e63a0 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -53,6 +53,8 @@
#define APMU_DISP1 0x110
#define APMU_CCIC0 0x50
#define APMU_CCIC1 0xf4
+#define APMU_USBHSIC0 0xf8
+#define APMU_USBHSIC1 0xfc
#define MPMU_UART_PLL 0x14
struct mmp2_clk_unit {
@@ -194,6 +196,8 @@ static struct mmp_clk_mix_config sdh_mix_config = {
};
static DEFINE_SPINLOCK(usb_lock);
+static DEFINE_SPINLOCK(usbhsic0_lock);
+static DEFINE_SPINLOCK(usbhsic1_lock);
static DEFINE_SPINLOCK(disp0_lock);
static DEFINE_SPINLOCK(disp1_lock);
@@ -224,6 +228,8 @@ static struct mmp_param_div_clk apmu_div_clks[] = {
static struct mmp_param_gate_clk apmu_gate_clks[] = {
{MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ {MMP2_CLK_USBHSIC0, "usbhsic0_clk", "usb_pll", 0, APMU_USBHSIC0, 0x1b, 0x1b, 0x0, 0, &usbhsic0_lock},
+ {MMP2_CLK_USBHSIC1, "usbhsic1_clk", "usb_pll", 0, APMU_USBHSIC1, 0x1b, 0x1b, 0x0, 0, &usbhsic1_lock},
/* The gate clocks has mux parent. */
{MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
{MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
index 6b6ba238b81a..a014ab96e673 100644
--- a/drivers/dma/ti/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c
@@ -2,6 +2,7 @@
/*
* OMAP DMAengine support
*/
+#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
@@ -23,12 +24,33 @@
#define OMAP_SDMA_REQUESTS 127
#define OMAP_SDMA_CHANNELS 32
+struct omap_dma_config {
+ int lch_end;
+ unsigned int rw_priority:1;
+ unsigned int needs_busy_check:1;
+ unsigned int may_lose_context:1;
+ unsigned int needs_lch_clear:1;
+};
+
+struct omap_dma_context {
+ u32 irqenable_l0;
+ u32 irqenable_l1;
+ u32 ocp_sysconfig;
+ u32 gcr;
+};
+
struct omap_dmadev {
struct dma_device ddev;
spinlock_t lock;
void __iomem *base;
const struct omap_dma_reg *reg_map;
struct omap_system_dma_plat_info *plat;
+ const struct omap_dma_config *cfg;
+ struct notifier_block nb;
+ struct omap_dma_context context;
+ int lch_count;
+ DECLARE_BITMAP(lch_bitmap, OMAP_SDMA_CHANNELS);
+ struct mutex lch_lock; /* for assigning logical channels */
bool legacy;
bool ll123_supported;
struct dma_pool *desc_pool;
@@ -376,6 +398,19 @@ static unsigned omap_dma_get_csr(struct omap_chan *c)
return val;
}
+static void omap_dma_clear_lch(struct omap_dmadev *od, int lch)
+{
+ struct omap_chan *c;
+ int i;
+
+ c = od->lch_map[lch];
+ if (!c)
+ return;
+
+ for (i = CSDP; i <= od->cfg->lch_end; i++)
+ omap_dma_chan_write(c, i, 0);
+}
+
static void omap_dma_assign(struct omap_dmadev *od, struct omap_chan *c,
unsigned lch)
{
@@ -633,6 +668,37 @@ static irqreturn_t omap_dma_irq(int irq, void *devid)
return IRQ_HANDLED;
}
+static int omap_dma_get_lch(struct omap_dmadev *od, int *lch)
+{
+ int channel;
+
+ mutex_lock(&od->lch_lock);
+ channel = find_first_zero_bit(od->lch_bitmap, od->lch_count);
+ if (channel >= od->lch_count)
+ goto out_busy;
+ set_bit(channel, od->lch_bitmap);
+ mutex_unlock(&od->lch_lock);
+
+ omap_dma_clear_lch(od, channel);
+ *lch = channel;
+
+ return 0;
+
+out_busy:
+ mutex_unlock(&od->lch_lock);
+ *lch = -EINVAL;
+
+ return -EBUSY;
+}
+
+static void omap_dma_put_lch(struct omap_dmadev *od, int lch)
+{
+ omap_dma_clear_lch(od, lch);
+ mutex_lock(&od->lch_lock);
+ clear_bit(lch, od->lch_bitmap);
+ mutex_unlock(&od->lch_lock);
+}
+
static int omap_dma_alloc_chan_resources(struct dma_chan *chan)
{
struct omap_dmadev *od = to_omap_dma_dev(chan->device);
@@ -644,8 +710,7 @@ static int omap_dma_alloc_chan_resources(struct dma_chan *chan)
ret = omap_request_dma(c->dma_sig, "DMA engine",
omap_dma_callback, c, &c->dma_ch);
} else {
- ret = omap_request_dma(c->dma_sig, "DMA engine", NULL, NULL,
- &c->dma_ch);
+ ret = omap_dma_get_lch(od, &c->dma_ch);
}
dev_dbg(dev, "allocating channel %u for %u\n", c->dma_ch, c->dma_sig);
@@ -702,7 +767,11 @@ static void omap_dma_free_chan_resources(struct dma_chan *chan)
c->channel_base = NULL;
od->lch_map[c->dma_ch] = NULL;
vchan_free_chan_resources(&c->vc);
- omap_free_dma(c->dma_ch);
+
+ if (od->legacy)
+ omap_free_dma(c->dma_ch);
+ else
+ omap_dma_put_lch(od, c->dma_ch);
dev_dbg(od->ddev.dev, "freeing channel %u used for %u\n", c->dma_ch,
c->dma_sig);
@@ -1453,16 +1522,128 @@ static void omap_dma_free(struct omap_dmadev *od)
}
}
+/* Currently only used for omap2. For omap1, also a check for lcd_dma is needed */
+static int omap_dma_busy_notifier(struct notifier_block *nb,
+ unsigned long cmd, void *v)
+{
+ struct omap_dmadev *od;
+ struct omap_chan *c;
+ int lch = -1;
+
+ od = container_of(nb, struct omap_dmadev, nb);
+
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ while (1) {
+ lch = find_next_bit(od->lch_bitmap, od->lch_count,
+ lch + 1);
+ if (lch >= od->lch_count)
+ break;
+ c = od->lch_map[lch];
+ if (!c)
+ continue;
+ if (omap_dma_chan_read(c, CCR) & CCR_ENABLE)
+ return NOTIFY_BAD;
+ }
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+/*
+ * We are using IRQENABLE_L1, and legacy DMA code was using IRQENABLE_L0.
+ * As the DSP may be using IRQENABLE_L2 and L3, let's not touch those for
+ * now. Context save seems to be only currently needed on omap3.
+ */
+static void omap_dma_context_save(struct omap_dmadev *od)
+{
+ od->context.irqenable_l0 = omap_dma_glbl_read(od, IRQENABLE_L0);
+ od->context.irqenable_l1 = omap_dma_glbl_read(od, IRQENABLE_L1);
+ od->context.ocp_sysconfig = omap_dma_glbl_read(od, OCP_SYSCONFIG);
+ od->context.gcr = omap_dma_glbl_read(od, GCR);
+}
+
+static void omap_dma_context_restore(struct omap_dmadev *od)
+{
+ int i;
+
+ omap_dma_glbl_write(od, GCR, od->context.gcr);
+ omap_dma_glbl_write(od, OCP_SYSCONFIG, od->context.ocp_sysconfig);
+ omap_dma_glbl_write(od, IRQENABLE_L0, od->context.irqenable_l0);
+ omap_dma_glbl_write(od, IRQENABLE_L1, od->context.irqenable_l1);
+
+ /* Clear IRQSTATUS_L0 as legacy DMA code is no longer doing it */
+ if (od->plat->errata & DMA_ROMCODE_BUG)
+ omap_dma_glbl_write(od, IRQSTATUS_L0, 0);
+
+ /* Clear dma channels */
+ for (i = 0; i < od->lch_count; i++)
+ omap_dma_clear_lch(od, i);
+}
+
+/* Currently only used for omap3 */
+static int omap_dma_context_notifier(struct notifier_block *nb,
+ unsigned long cmd, void *v)
+{
+ struct omap_dmadev *od;
+
+ od = container_of(nb, struct omap_dmadev, nb);
+
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ omap_dma_context_save(od);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ omap_dma_context_restore(od);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static void omap_dma_init_gcr(struct omap_dmadev *od, int arb_rate,
+ int max_fifo_depth, int tparams)
+{
+ u32 val;
+
+ /* Set only for omap2430 and later */
+ if (!od->cfg->rw_priority)
+ return;
+
+ if (max_fifo_depth == 0)
+ max_fifo_depth = 1;
+ if (arb_rate == 0)
+ arb_rate = 1;
+
+ val = 0xff & max_fifo_depth;
+ val |= (0x3 & tparams) << 12;
+ val |= (arb_rate & 0xff) << 16;
+
+ omap_dma_glbl_write(od, GCR, val);
+}
+
#define OMAP_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+/*
+ * No flags currently set for default configuration as omap1 is still
+ * using platform data.
+ */
+static const struct omap_dma_config default_cfg;
+
static int omap_dma_probe(struct platform_device *pdev)
{
+ const struct omap_dma_config *conf;
struct omap_dmadev *od;
struct resource *res;
int rc, i, irq;
- u32 lch_count;
+ u32 val;
od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
if (!od)
@@ -1473,9 +1654,21 @@ static int omap_dma_probe(struct platform_device *pdev)
if (IS_ERR(od->base))
return PTR_ERR(od->base);
- od->plat = omap_get_plat_info();
- if (!od->plat)
- return -EPROBE_DEFER;
+ conf = of_device_get_match_data(&pdev->dev);
+ if (conf) {
+ od->cfg = conf;
+ od->plat = dev_get_platdata(&pdev->dev);
+ if (!od->plat) {
+ dev_err(&pdev->dev, "omap_system_dma_plat_info is missing");
+ return -ENODEV;
+ }
+ } else {
+ od->cfg = &default_cfg;
+
+ od->plat = omap_get_plat_info();
+ if (!od->plat)
+ return -EPROBE_DEFER;
+ }
od->reg_map = od->plat->reg_map;
@@ -1507,6 +1700,7 @@ static int omap_dma_probe(struct platform_device *pdev)
od->ddev.max_burst = SZ_16M - 1; /* CCEN: 24bit unsigned */
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
+ mutex_init(&od->lch_lock);
spin_lock_init(&od->lock);
spin_lock_init(&od->irq_lock);
@@ -1522,18 +1716,30 @@ static int omap_dma_probe(struct platform_device *pdev)
/* Number of available logical channels */
if (!pdev->dev.of_node) {
- lch_count = od->plat->dma_attr->lch_count;
- if (unlikely(!lch_count))
- lch_count = OMAP_SDMA_CHANNELS;
+ od->lch_count = od->plat->dma_attr->lch_count;
+ if (unlikely(!od->lch_count))
+ od->lch_count = OMAP_SDMA_CHANNELS;
} else if (of_property_read_u32(pdev->dev.of_node, "dma-channels",
- &lch_count)) {
+ &od->lch_count)) {
dev_info(&pdev->dev,
"Missing dma-channels property, using %u.\n",
OMAP_SDMA_CHANNELS);
- lch_count = OMAP_SDMA_CHANNELS;
+ od->lch_count = OMAP_SDMA_CHANNELS;
+ }
+
+ /* Mask of allowed logical channels */
+ if (pdev->dev.of_node && !of_property_read_u32(pdev->dev.of_node,
+ "dma-channel-mask",
+ &val)) {
+ /* Tag channels not in mask as reserved */
+ val = ~val;
+ bitmap_from_arr32(od->lch_bitmap, &val, od->lch_count);
}
+ if (od->plat->dma_attr->dev_caps & HS_CHANNELS_RESERVED)
+ bitmap_set(od->lch_bitmap, 0, 2);
- od->lch_map = devm_kcalloc(&pdev->dev, lch_count, sizeof(*od->lch_map),
+ od->lch_map = devm_kcalloc(&pdev->dev, od->lch_count,
+ sizeof(*od->lch_map),
GFP_KERNEL);
if (!od->lch_map)
return -ENOMEM;
@@ -1605,6 +1811,16 @@ static int omap_dma_probe(struct platform_device *pdev)
}
}
+ omap_dma_init_gcr(od, DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0);
+
+ if (od->cfg->needs_busy_check) {
+ od->nb.notifier_call = omap_dma_busy_notifier;
+ cpu_pm_register_notifier(&od->nb);
+ } else if (od->cfg->may_lose_context) {
+ od->nb.notifier_call = omap_dma_context_notifier;
+ cpu_pm_register_notifier(&od->nb);
+ }
+
dev_info(&pdev->dev, "OMAP DMA engine driver%s\n",
od->ll123_supported ? " (LinkedList1/2/3 supported)" : "");
@@ -1616,6 +1832,9 @@ static int omap_dma_remove(struct platform_device *pdev)
struct omap_dmadev *od = platform_get_drvdata(pdev);
int irq;
+ if (od->cfg->may_lose_context)
+ cpu_pm_unregister_notifier(&od->nb);
+
if (pdev->dev.of_node)
of_dma_controller_free(pdev->dev.of_node);
@@ -1637,12 +1856,45 @@ static int omap_dma_remove(struct platform_device *pdev)
return 0;
}
+static const struct omap_dma_config omap2420_data = {
+ .lch_end = CCFN,
+ .rw_priority = true,
+ .needs_lch_clear = true,
+ .needs_busy_check = true,
+};
+
+static const struct omap_dma_config omap2430_data = {
+ .lch_end = CCFN,
+ .rw_priority = true,
+ .needs_lch_clear = true,
+};
+
+static const struct omap_dma_config omap3430_data = {
+ .lch_end = CCFN,
+ .rw_priority = true,
+ .needs_lch_clear = true,
+ .may_lose_context = true,
+};
+
+static const struct omap_dma_config omap3630_data = {
+ .lch_end = CCDN,
+ .rw_priority = true,
+ .needs_lch_clear = true,
+ .may_lose_context = true,
+};
+
+static const struct omap_dma_config omap4_data = {
+ .lch_end = CCDN,
+ .rw_priority = true,
+ .needs_lch_clear = true,
+};
+
static const struct of_device_id omap_dma_match[] = {
- { .compatible = "ti,omap2420-sdma", },
- { .compatible = "ti,omap2430-sdma", },
- { .compatible = "ti,omap3430-sdma", },
- { .compatible = "ti,omap3630-sdma", },
- { .compatible = "ti,omap4430-sdma", },
+ { .compatible = "ti,omap2420-sdma", .data = &omap2420_data, },
+ { .compatible = "ti,omap2430-sdma", .data = &omap2430_data, },
+ { .compatible = "ti,omap3430-sdma", .data = &omap3430_data, },
+ { .compatible = "ti,omap3630-sdma", .data = &omap3630_data, },
+ { .compatible = "ti,omap4430-sdma", .data = &omap4_data, },
{},
};
MODULE_DEVICE_TABLE(of, omap_dma_match);
diff --git a/include/dt-bindings/clock/marvell,mmp2.h b/include/dt-bindings/clock/marvell,mmp2.h
index e785c6eb3561..4b1a7724f20d 100644
--- a/include/dt-bindings/clock/marvell,mmp2.h
+++ b/include/dt-bindings/clock/marvell,mmp2.h
@@ -72,6 +72,8 @@
#define MMP2_CLK_CCIC1_PHY 118
#define MMP2_CLK_CCIC1_SPHY 119
#define MMP2_CLK_DISP0_LCDC 120
+#define MMP2_CLK_USBHSIC0 121
+#define MMP2_CLK_USBHSIC1 122
#define MMP2_NR_CLKS 200
#endif
diff --git a/include/dt-bindings/memory/tegra186-mc.h b/include/dt-bindings/memory/tegra186-mc.h
index 64813536aec9..82a1e27f7357 100644
--- a/include/dt-bindings/memory/tegra186-mc.h
+++ b/include/dt-bindings/memory/tegra186-mc.h
@@ -108,4 +108,143 @@
#define TEGRA186_SID_SE_VM6 0x4e
#define TEGRA186_SID_SE_VM7 0x4f
+/*
+ * memory client IDs
+ */
+
+/* Misses from System Memory Management Unit (SMMU) Page Table Cache (PTC) */
+#define TEGRA186_MEMORY_CLIENT_PTCR 0x00
+/* PCIE reads */
+#define TEGRA186_MEMORY_CLIENT_AFIR 0x0e
+/* High-definition audio (HDA) reads */
+#define TEGRA186_MEMORY_CLIENT_HDAR 0x15
+/* Host channel data reads */
+#define TEGRA186_MEMORY_CLIENT_HOST1XDMAR 0x16
+#define TEGRA186_MEMORY_CLIENT_NVENCSRD 0x1c
+/* SATA reads */
+#define TEGRA186_MEMORY_CLIENT_SATAR 0x1f
+/* Reads from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA186_MEMORY_CLIENT_MPCORER 0x27
+#define TEGRA186_MEMORY_CLIENT_NVENCSWR 0x2b
+/* PCIE writes */
+#define TEGRA186_MEMORY_CLIENT_AFIW 0x31
+/* High-definition audio (HDA) writes */
+#define TEGRA186_MEMORY_CLIENT_HDAW 0x35
+/* Writes from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA186_MEMORY_CLIENT_MPCOREW 0x39
+/* SATA writes */
+#define TEGRA186_MEMORY_CLIENT_SATAW 0x3d
+/* ISP Read client for Crossbar A */
+#define TEGRA186_MEMORY_CLIENT_ISPRA 0x44
+/* ISP Write client for Crossbar A */
+#define TEGRA186_MEMORY_CLIENT_ISPWA 0x46
+/* ISP Write client Crossbar B */
+#define TEGRA186_MEMORY_CLIENT_ISPWB 0x47
+/* XUSB reads */
+#define TEGRA186_MEMORY_CLIENT_XUSB_HOSTR 0x4a
+/* XUSB_HOST writes */
+#define TEGRA186_MEMORY_CLIENT_XUSB_HOSTW 0x4b
+/* XUSB reads */
+#define TEGRA186_MEMORY_CLIENT_XUSB_DEVR 0x4c
+/* XUSB_DEV writes */
+#define TEGRA186_MEMORY_CLIENT_XUSB_DEVW 0x4d
+/* TSEC Memory Return Data Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSRD 0x54
+/* TSEC Memory Write Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSWR 0x55
+/* 3D, ltcx reads instance 0 */
+#define TEGRA186_MEMORY_CLIENT_GPUSRD 0x58
+/* 3D, ltcx writes instance 0 */
+#define TEGRA186_MEMORY_CLIENT_GPUSWR 0x59
+/* sdmmca memory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCRA 0x60
+/* sdmmcbmemory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCRAA 0x61
+/* sdmmc memory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCR 0x62
+/* sdmmcd memory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCRAB 0x63
+/* sdmmca memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCWA 0x64
+/* sdmmcb memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCWAA 0x65
+/* sdmmc memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCW 0x66
+/* sdmmcd memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCWAB 0x67
+#define TEGRA186_MEMORY_CLIENT_VICSRD 0x6c
+#define TEGRA186_MEMORY_CLIENT_VICSWR 0x6d
+/* VI Write client */
+#define TEGRA186_MEMORY_CLIENT_VIW 0x72
+#define TEGRA186_MEMORY_CLIENT_NVDECSRD 0x78
+#define TEGRA186_MEMORY_CLIENT_NVDECSWR 0x79
+/* Audio Processing (APE) engine reads */
+#define TEGRA186_MEMORY_CLIENT_APER 0x7a
+/* Audio Processing (APE) engine writes */
+#define TEGRA186_MEMORY_CLIENT_APEW 0x7b
+#define TEGRA186_MEMORY_CLIENT_NVJPGSRD 0x7e
+#define TEGRA186_MEMORY_CLIENT_NVJPGSWR 0x7f
+/* SE Memory Return Data Client Description */
+#define TEGRA186_MEMORY_CLIENT_SESRD 0x80
+/* SE Memory Write Client Description */
+#define TEGRA186_MEMORY_CLIENT_SESWR 0x81
+/* ETR reads */
+#define TEGRA186_MEMORY_CLIENT_ETRR 0x84
+/* ETR writes */
+#define TEGRA186_MEMORY_CLIENT_ETRW 0x85
+/* TSECB Memory Return Data Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSRDB 0x86
+/* TSECB Memory Write Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSWRB 0x87
+/* 3D, ltcx reads instance 1 */
+#define TEGRA186_MEMORY_CLIENT_GPUSRD2 0x88
+/* 3D, ltcx writes instance 1 */
+#define TEGRA186_MEMORY_CLIENT_GPUSWR2 0x89
+/* AXI Switch read client */
+#define TEGRA186_MEMORY_CLIENT_AXISR 0x8c
+/* AXI Switch write client */
+#define TEGRA186_MEMORY_CLIENT_AXISW 0x8d
+/* EQOS read client */
+#define TEGRA186_MEMORY_CLIENT_EQOSR 0x8e
+/* EQOS write client */
+#define TEGRA186_MEMORY_CLIENT_EQOSW 0x8f
+/* UFSHC read client */
+#define TEGRA186_MEMORY_CLIENT_UFSHCR 0x90
+/* UFSHC write client */
+#define TEGRA186_MEMORY_CLIENT_UFSHCW 0x91
+/* NVDISPLAY read client */
+#define TEGRA186_MEMORY_CLIENT_NVDISPLAYR 0x92
+/* BPMP read client */
+#define TEGRA186_MEMORY_CLIENT_BPMPR 0x93
+/* BPMP write client */
+#define TEGRA186_MEMORY_CLIENT_BPMPW 0x94
+/* BPMPDMA read client */
+#define TEGRA186_MEMORY_CLIENT_BPMPDMAR 0x95
+/* BPMPDMA write client */
+#define TEGRA186_MEMORY_CLIENT_BPMPDMAW 0x96
+/* AON read client */
+#define TEGRA186_MEMORY_CLIENT_AONR 0x97
+/* AON write client */
+#define TEGRA186_MEMORY_CLIENT_AONW 0x98
+/* AONDMA read client */
+#define TEGRA186_MEMORY_CLIENT_AONDMAR 0x99
+/* AONDMA write client */
+#define TEGRA186_MEMORY_CLIENT_AONDMAW 0x9a
+/* SCE read client */
+#define TEGRA186_MEMORY_CLIENT_SCER 0x9b
+/* SCE write client */
+#define TEGRA186_MEMORY_CLIENT_SCEW 0x9c
+/* SCEDMA read client */
+#define TEGRA186_MEMORY_CLIENT_SCEDMAR 0x9d
+/* SCEDMA write client */
+#define TEGRA186_MEMORY_CLIENT_SCEDMAW 0x9e
+/* APEDMA read client */
+#define TEGRA186_MEMORY_CLIENT_APEDMAR 0x9f
+/* APEDMA write client */
+#define TEGRA186_MEMORY_CLIENT_APEDMAW 0xa0
+/* NVDISPLAY read client instance 2 */
+#define TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 0xa1
+#define TEGRA186_MEMORY_CLIENT_VICSRD1 0xa2
+#define TEGRA186_MEMORY_CLIENT_NVDECSRD1 0xa3
+
#endif
diff --git a/include/dt-bindings/memory/tegra194-mc.h b/include/dt-bindings/memory/tegra194-mc.h
new file mode 100644
index 000000000000..eed48b746bc9
--- /dev/null
+++ b/include/dt-bindings/memory/tegra194-mc.h
@@ -0,0 +1,410 @@
+#ifndef DT_BINDINGS_MEMORY_TEGRA194_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA194_MC_H
+
+/* special clients */
+#define TEGRA194_SID_INVALID 0x00
+#define TEGRA194_SID_PASSTHROUGH 0x7f
+
+/* host1x clients */
+#define TEGRA194_SID_HOST1X 0x01
+#define TEGRA194_SID_CSI 0x02
+#define TEGRA194_SID_VIC 0x03
+#define TEGRA194_SID_VI 0x04
+#define TEGRA194_SID_ISP 0x05
+#define TEGRA194_SID_NVDEC 0x06
+#define TEGRA194_SID_NVENC 0x07
+#define TEGRA194_SID_NVJPG 0x08
+#define TEGRA194_SID_NVDISPLAY 0x09
+#define TEGRA194_SID_TSEC 0x0a
+#define TEGRA194_SID_TSECB 0x0b
+#define TEGRA194_SID_SE 0x0c
+#define TEGRA194_SID_SE1 0x0d
+#define TEGRA194_SID_SE2 0x0e
+#define TEGRA194_SID_SE3 0x0f
+
+/* GPU clients */
+#define TEGRA194_SID_GPU 0x10
+
+/* other SoC clients */
+#define TEGRA194_SID_AFI 0x11
+#define TEGRA194_SID_HDA 0x12
+#define TEGRA194_SID_ETR 0x13
+#define TEGRA194_SID_EQOS 0x14
+#define TEGRA194_SID_UFSHC 0x15
+#define TEGRA194_SID_AON 0x16
+#define TEGRA194_SID_SDMMC4 0x17
+#define TEGRA194_SID_SDMMC3 0x18
+#define TEGRA194_SID_SDMMC2 0x19
+#define TEGRA194_SID_SDMMC1 0x1a
+#define TEGRA194_SID_XUSB_HOST 0x1b
+#define TEGRA194_SID_XUSB_DEV 0x1c
+#define TEGRA194_SID_SATA 0x1d
+#define TEGRA194_SID_APE 0x1e
+#define TEGRA194_SID_SCE 0x1f
+
+/* GPC DMA clients */
+#define TEGRA194_SID_GPCDMA_0 0x20
+#define TEGRA194_SID_GPCDMA_1 0x21
+#define TEGRA194_SID_GPCDMA_2 0x22
+#define TEGRA194_SID_GPCDMA_3 0x23
+#define TEGRA194_SID_GPCDMA_4 0x24
+#define TEGRA194_SID_GPCDMA_5 0x25
+#define TEGRA194_SID_GPCDMA_6 0x26
+#define TEGRA194_SID_GPCDMA_7 0x27
+
+/* APE DMA clients */
+#define TEGRA194_SID_APE_1 0x28
+#define TEGRA194_SID_APE_2 0x29
+
+/* camera RTCPU */
+#define TEGRA194_SID_RCE 0x2a
+
+/* camera RTCPU on host1x address space */
+#define TEGRA194_SID_RCE_1X 0x2b
+
+/* APE DMA clients */
+#define TEGRA194_SID_APE_3 0x2c
+
+/* camera RTCPU running on APE */
+#define TEGRA194_SID_APE_CAM 0x2d
+#define TEGRA194_SID_APE_CAM_1X 0x2e
+
+#define TEGRA194_SID_RCE_RM 0x2f
+#define TEGRA194_SID_VI_FALCON 0x30
+#define TEGRA194_SID_ISP_FALCON 0x31
+
+/*
+ * The BPMP has its SID value hardcoded in the firmware. Changing it requires
+ * considerable effort.
+ */
+#define TEGRA194_SID_BPMP 0x32
+
+/* for SMMU tests */
+#define TEGRA194_SID_SMMU_TEST 0x33
+
+/* host1x virtualization channels */
+#define TEGRA194_SID_HOST1X_CTX0 0x38
+#define TEGRA194_SID_HOST1X_CTX1 0x39
+#define TEGRA194_SID_HOST1X_CTX2 0x3a
+#define TEGRA194_SID_HOST1X_CTX3 0x3b
+#define TEGRA194_SID_HOST1X_CTX4 0x3c
+#define TEGRA194_SID_HOST1X_CTX5 0x3d
+#define TEGRA194_SID_HOST1X_CTX6 0x3e
+#define TEGRA194_SID_HOST1X_CTX7 0x3f
+
+/* host1x command buffers */
+#define TEGRA194_SID_HOST1X_VM0 0x40
+#define TEGRA194_SID_HOST1X_VM1 0x41
+#define TEGRA194_SID_HOST1X_VM2 0x42
+#define TEGRA194_SID_HOST1X_VM3 0x43
+#define TEGRA194_SID_HOST1X_VM4 0x44
+#define TEGRA194_SID_HOST1X_VM5 0x45
+#define TEGRA194_SID_HOST1X_VM6 0x46
+#define TEGRA194_SID_HOST1X_VM7 0x47
+
+/* SE data buffers */
+#define TEGRA194_SID_SE_VM0 0x48
+#define TEGRA194_SID_SE_VM1 0x49
+#define TEGRA194_SID_SE_VM2 0x4a
+#define TEGRA194_SID_SE_VM3 0x4b
+#define TEGRA194_SID_SE_VM4 0x4c
+#define TEGRA194_SID_SE_VM5 0x4d
+#define TEGRA194_SID_SE_VM6 0x4e
+#define TEGRA194_SID_SE_VM7 0x4f
+
+#define TEGRA194_SID_MIU 0x50
+
+#define TEGRA194_SID_NVDLA0 0x51
+#define TEGRA194_SID_NVDLA1 0x52
+
+#define TEGRA194_SID_PVA0 0x53
+#define TEGRA194_SID_PVA1 0x54
+#define TEGRA194_SID_NVENC1 0x55
+#define TEGRA194_SID_PCIE0 0x56
+#define TEGRA194_SID_PCIE1 0x57
+#define TEGRA194_SID_PCIE2 0x58
+#define TEGRA194_SID_PCIE3 0x59
+#define TEGRA194_SID_PCIE4 0x5a
+#define TEGRA194_SID_PCIE5 0x5b
+#define TEGRA194_SID_NVDEC1 0x5c
+
+#define TEGRA194_SID_XUSB_VF0 0x5d
+#define TEGRA194_SID_XUSB_VF1 0x5e
+#define TEGRA194_SID_XUSB_VF2 0x5f
+#define TEGRA194_SID_XUSB_VF3 0x60
+
+#define TEGRA194_SID_RCE_VM3 0x61
+#define TEGRA194_SID_VI_VM2 0x62
+#define TEGRA194_SID_VI_VM3 0x63
+#define TEGRA194_SID_RCE_SERVER 0x64
+
+/*
+ * memory client IDs
+ */
+
+/* Misses from System Memory Management Unit (SMMU) Page Table Cache (PTC) */
+#define TEGRA194_MEMORY_CLIENT_PTCR 0x00
+/* MSS internal memqual MIU7 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU7R 0x01
+/* MSS internal memqual MIU7 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU7W 0x02
+/* High-definition audio (HDA) read clients */
+#define TEGRA194_MEMORY_CLIENT_HDAR 0x15
+/* Host channel data read clients */
+#define TEGRA194_MEMORY_CLIENT_HOST1XDMAR 0x16
+#define TEGRA194_MEMORY_CLIENT_NVENCSRD 0x1c
+/* SATA read clients */
+#define TEGRA194_MEMORY_CLIENT_SATAR 0x1f
+/* Reads from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA194_MEMORY_CLIENT_MPCORER 0x27
+#define TEGRA194_MEMORY_CLIENT_NVENCSWR 0x2b
+/* High-definition audio (HDA) write clients */
+#define TEGRA194_MEMORY_CLIENT_HDAW 0x35
+/* Writes from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA194_MEMORY_CLIENT_MPCOREW 0x39
+/* SATA write clients */
+#define TEGRA194_MEMORY_CLIENT_SATAW 0x3d
+/* ISP read client for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPRA 0x44
+/* ISP read client 1 for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPFALR 0x45
+/* ISP Write client for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPWA 0x46
+/* ISP Write client Crossbar B */
+#define TEGRA194_MEMORY_CLIENT_ISPWB 0x47
+/* XUSB_HOST read clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_HOSTR 0x4a
+/* XUSB_HOST write clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_HOSTW 0x4b
+/* XUSB read clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_DEVR 0x4c
+/* XUSB_DEV write clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_DEVW 0x4d
+/* sdmmca memory read client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCRA 0x60
+/* sdmmc memory read client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCR 0x62
+/* sdmmcd memory read client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCRAB 0x63
+/* sdmmca memory write client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCWA 0x64
+/* sdmmc memory write client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCW 0x66
+/* sdmmcd memory write client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCWAB 0x67
+#define TEGRA194_MEMORY_CLIENT_VICSRD 0x6c
+#define TEGRA194_MEMORY_CLIENT_VICSWR 0x6d
+/* VI Write client */
+#define TEGRA194_MEMORY_CLIENT_VIW 0x72
+#define TEGRA194_MEMORY_CLIENT_NVDECSRD 0x78
+#define TEGRA194_MEMORY_CLIENT_NVDECSWR 0x79
+/* Audio Processing (APE) engine read clients */
+#define TEGRA194_MEMORY_CLIENT_APER 0x7a
+/* Audio Processing (APE) engine write clients */
+#define TEGRA194_MEMORY_CLIENT_APEW 0x7b
+#define TEGRA194_MEMORY_CLIENT_NVJPGSRD 0x7e
+#define TEGRA194_MEMORY_CLIENT_NVJPGSWR 0x7f
+/* AXI AP and DFD-AUX0/1 read clients Both share the same interface on the on MSS */
+#define TEGRA194_MEMORY_CLIENT_AXIAPR 0x82
+/* AXI AP and DFD-AUX0/1 write clients Both sahre the same interface on MSS */
+#define TEGRA194_MEMORY_CLIENT_AXIAPW 0x83
+/* ETR read clients */
+#define TEGRA194_MEMORY_CLIENT_ETRR 0x84
+/* ETR write clients */
+#define TEGRA194_MEMORY_CLIENT_ETRW 0x85
+/* AXI Switch read client */
+#define TEGRA194_MEMORY_CLIENT_AXISR 0x8c
+/* AXI Switch write client */
+#define TEGRA194_MEMORY_CLIENT_AXISW 0x8d
+/* EQOS read client */
+#define TEGRA194_MEMORY_CLIENT_EQOSR 0x8e
+/* EQOS write client */
+#define TEGRA194_MEMORY_CLIENT_EQOSW 0x8f
+/* UFSHC read client */
+#define TEGRA194_MEMORY_CLIENT_UFSHCR 0x90
+/* UFSHC write client */
+#define TEGRA194_MEMORY_CLIENT_UFSHCW 0x91
+/* NVDISPLAY read client */
+#define TEGRA194_MEMORY_CLIENT_NVDISPLAYR 0x92
+/* BPMP read client */
+#define TEGRA194_MEMORY_CLIENT_BPMPR 0x93
+/* BPMP write client */
+#define TEGRA194_MEMORY_CLIENT_BPMPW 0x94
+/* BPMPDMA read client */
+#define TEGRA194_MEMORY_CLIENT_BPMPDMAR 0x95
+/* BPMPDMA write client */
+#define TEGRA194_MEMORY_CLIENT_BPMPDMAW 0x96
+/* AON read client */
+#define TEGRA194_MEMORY_CLIENT_AONR 0x97
+/* AON write client */
+#define TEGRA194_MEMORY_CLIENT_AONW 0x98
+/* AONDMA read client */
+#define TEGRA194_MEMORY_CLIENT_AONDMAR 0x99
+/* AONDMA write client */
+#define TEGRA194_MEMORY_CLIENT_AONDMAW 0x9a
+/* SCE read client */
+#define TEGRA194_MEMORY_CLIENT_SCER 0x9b
+/* SCE write client */
+#define TEGRA194_MEMORY_CLIENT_SCEW 0x9c
+/* SCEDMA read client */
+#define TEGRA194_MEMORY_CLIENT_SCEDMAR 0x9d
+/* SCEDMA write client */
+#define TEGRA194_MEMORY_CLIENT_SCEDMAW 0x9e
+/* APEDMA read client */
+#define TEGRA194_MEMORY_CLIENT_APEDMAR 0x9f
+/* APEDMA write client */
+#define TEGRA194_MEMORY_CLIENT_APEDMAW 0xa0
+/* NVDISPLAY read client instance 2 */
+#define TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 0xa1
+#define TEGRA194_MEMORY_CLIENT_VICSRD1 0xa2
+#define TEGRA194_MEMORY_CLIENT_NVDECSRD1 0xa3
+/* MSS internal memqual MIU0 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU0R 0xa6
+/* MSS internal memqual MIU0 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU0W 0xa7
+/* MSS internal memqual MIU1 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU1R 0xa8
+/* MSS internal memqual MIU1 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU1W 0xa9
+/* MSS internal memqual MIU2 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU2R 0xae
+/* MSS internal memqual MIU2 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU2W 0xaf
+/* MSS internal memqual MIU3 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU3R 0xb0
+/* MSS internal memqual MIU3 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU3W 0xb1
+/* MSS internal memqual MIU4 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU4R 0xb2
+/* MSS internal memqual MIU4 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU4W 0xb3
+#define TEGRA194_MEMORY_CLIENT_DPMUR 0xb4
+#define TEGRA194_MEMORY_CLIENT_DPMUW 0xb5
+#define TEGRA194_MEMORY_CLIENT_NVL0R 0xb6
+#define TEGRA194_MEMORY_CLIENT_NVL0W 0xb7
+#define TEGRA194_MEMORY_CLIENT_NVL1R 0xb8
+#define TEGRA194_MEMORY_CLIENT_NVL1W 0xb9
+#define TEGRA194_MEMORY_CLIENT_NVL2R 0xba
+#define TEGRA194_MEMORY_CLIENT_NVL2W 0xbb
+/* VI FLACON read clients */
+#define TEGRA194_MEMORY_CLIENT_VIFALR 0xbc
+/* VIFAL write clients */
+#define TEGRA194_MEMORY_CLIENT_VIFALW 0xbd
+/* DLA0ARDA read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0RDA 0xbe
+/* DLA0 Falcon read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0FALRDB 0xbf
+/* DLA0 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0WRA 0xc0
+/* DLA0 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0FALWRB 0xc1
+/* DLA1ARDA read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1RDA 0xc2
+/* DLA1 Falcon read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1FALRDB 0xc3
+/* DLA1 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1WRA 0xc4
+/* DLA1 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1FALWRB 0xc5
+/* PVA0RDA read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDA 0xc6
+/* PVA0RDB read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDB 0xc7
+/* PVA0RDC read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDC 0xc8
+/* PVA0WRA write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0WRA 0xc9
+/* PVA0WRB write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0WRB 0xca
+/* PVA0WRC write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0WRC 0xcb
+/* PVA1RDA read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDA 0xcc
+/* PVA1RDB read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDB 0xcd
+/* PVA1RDC read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDC 0xce
+/* PVA1WRA write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1WRA 0xcf
+/* PVA1WRB write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1WRB 0xd0
+/* PVA1WRC write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1WRC 0xd1
+/* RCE read client */
+#define TEGRA194_MEMORY_CLIENT_RCER 0xd2
+/* RCE write client */
+#define TEGRA194_MEMORY_CLIENT_RCEW 0xd3
+/* RCEDMA read client */
+#define TEGRA194_MEMORY_CLIENT_RCEDMAR 0xd4
+/* RCEDMA write client */
+#define TEGRA194_MEMORY_CLIENT_RCEDMAW 0xd5
+#define TEGRA194_MEMORY_CLIENT_NVENC1SRD 0xd6
+#define TEGRA194_MEMORY_CLIENT_NVENC1SWR 0xd7
+/* PCIE0 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE0R 0xd8
+/* PCIE0 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE0W 0xd9
+/* PCIE1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE1R 0xda
+/* PCIE1 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE1W 0xdb
+/* PCIE2 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE2AR 0xdc
+/* PCIE2 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE2AW 0xdd
+/* PCIE3 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE3R 0xde
+/* PCIE3 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE3W 0xdf
+/* PCIE4 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE4R 0xe0
+/* PCIE4 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE4W 0xe1
+/* PCIE5 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE5R 0xe2
+/* PCIE5 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE5W 0xe3
+/* ISP read client 1 for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPFALW 0xe4
+#define TEGRA194_MEMORY_CLIENT_NVL3R 0xe5
+#define TEGRA194_MEMORY_CLIENT_NVL3W 0xe6
+#define TEGRA194_MEMORY_CLIENT_NVL4R 0xe7
+#define TEGRA194_MEMORY_CLIENT_NVL4W 0xe8
+/* DLA0ARDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0RDA1 0xe9
+/* DLA1ARDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1RDA1 0xea
+/* PVA0RDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDA1 0xeb
+/* PVA0RDB1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDB1 0xec
+/* PVA1RDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDA1 0xed
+/* PVA1RDB1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDB1 0xee
+/* PCIE5r1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE5R1 0xef
+#define TEGRA194_MEMORY_CLIENT_NVENCSRD1 0xf0
+#define TEGRA194_MEMORY_CLIENT_NVENC1SRD1 0xf1
+/* ISP read client for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPRA1 0xf2
+/* PCIE0 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE0R1 0xf3
+#define TEGRA194_MEMORY_CLIENT_NVL0RHP 0xf4
+#define TEGRA194_MEMORY_CLIENT_NVL1RHP 0xf5
+#define TEGRA194_MEMORY_CLIENT_NVL2RHP 0xf6
+#define TEGRA194_MEMORY_CLIENT_NVL3RHP 0xf7
+#define TEGRA194_MEMORY_CLIENT_NVL4RHP 0xf8
+#define TEGRA194_MEMORY_CLIENT_NVDEC1SRD 0xf9
+#define TEGRA194_MEMORY_CLIENT_NVDEC1SRD1 0xfa
+#define TEGRA194_MEMORY_CLIENT_NVDEC1SWR 0xfb
+/* MSS internal memqual MIU5 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU5R 0xfc
+/* MSS internal memqual MIU5 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU5W 0xfd
+/* MSS internal memqual MIU6 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU6R 0xfe
+/* MSS internal memqual MIU6 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU6W 0xff
+
+#endif
diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h
index ba3cfbb52312..5c5c93ad6b50 100644
--- a/include/linux/omap-dma.h
+++ b/include/linux/omap-dma.h
@@ -129,7 +129,6 @@
#define IS_WORD_16 BIT(0xd)
#define ENABLE_16XX_MODE BIT(0xe)
#define HS_CHANNELS_RESERVED BIT(0xf)
-#define DMA_ENGINE_HANDLE_IRQ BIT(0x10)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
@@ -239,9 +238,6 @@ struct omap_dma_lch {
void (*callback)(int lch, u16 ch_status, void *data);
void *data;
long flags;
- /* required for Dynamic chaining */
- int prev_linked_ch;
- int next_linked_ch;
int state;
int chain_id;
int status;
@@ -303,7 +299,6 @@ extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch);
-extern void omap_enable_dma_irq(int ch, u16 irq_bits);
extern void omap_disable_dma_irq(int ch, u16 irq_bits);
extern void omap_free_dma(int ch);
extern void omap_start_dma(int lch);
@@ -312,7 +307,6 @@ extern void omap_set_dma_transfer_params(int lch, int data_type,
int elem_count, int frame_count,
int sync_mode,
int dma_trigger, int src_or_dst_synch);
-extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
@@ -329,22 +323,10 @@ extern void omap_set_dma_dest_data_pack(int lch, int enable);
extern void omap_set_dma_dest_burst_mode(int lch,
enum omap_dma_burst_mode burst_mode);
-extern void omap_set_dma_params(int lch,
- struct omap_dma_channel_params *params);
-
-extern void omap_dma_link_lch(int lch_head, int lch_queue);
-
-extern int omap_set_dma_callback(int lch,
- void (*callback)(int lch, u16 ch_status, void *data),
- void *data);
extern dma_addr_t omap_get_dma_src_pos(int lch);
extern dma_addr_t omap_get_dma_dst_pos(int lch);
extern int omap_get_dma_active_status(int lch);
extern int omap_dma_running(void);
-extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
- int tparams);
-void omap_dma_global_context_save(void);
-void omap_dma_global_context_restore(void);
#if defined(CONFIG_ARCH_OMAP1) && IS_ENABLED(CONFIG_FB_OMAP)
#include <mach/lcd_dma.h>
diff --git a/include/sound/aess.h b/include/sound/aess.h
deleted file mode 100644
index cee0d09fadbd..000000000000
--- a/include/sound/aess.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * AESS IP block reset
- *
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-#ifndef __SOUND_AESS_H__
-#define __SOUND_AESS_H__
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-/*
- * AESS_AUTO_GATING_ENABLE_OFFSET: offset in bytes of the AESS IP
- * block's AESS_AUTO_GATING_ENABLE__1 register from the IP block's
- * base address
- */
-#define AESS_AUTO_GATING_ENABLE_OFFSET 0x07c
-
-/* Register bitfields in the AESS_AUTO_GATING_ENABLE__1 register */
-#define AESS_AUTO_GATING_ENABLE_SHIFT 0
-
-/**
- * aess_enable_autogating - enable AESS internal autogating
- * @oh: struct omap_hwmod *
- *
- * Enable internal autogating on the AESS. This allows the AESS to
- * indicate that it is idle to the OMAP PRCM. Returns 0.
- */
-static inline void aess_enable_autogating(void __iomem *base)
-{
- u32 v;
-
- /* Set AESS_AUTO_GATING_ENABLE__1.ENABLE to allow idle entry */
- v = 1 << AESS_AUTO_GATING_ENABLE_SHIFT;
- writel(v, base + AESS_AUTO_GATING_ENABLE_OFFSET);
-}
-
-#endif /* __SOUND_AESS_H__ */