diff options
| -rw-r--r-- | drivers/mfd/axp20x-i2c.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/axp20x.c | 107 | ||||
| -rw-r--r-- | include/linux/mfd/axp20x.h | 85 |
3 files changed, 194 insertions, 0 deletions
diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c index f49fbd307958..b4f5cb457117 100644 --- a/drivers/mfd/axp20x-i2c.c +++ b/drivers/mfd/axp20x-i2c.c @@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = { { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID }, { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID }, + { .compatible = "x-powers,axp15060", .data = (void *)AXP15060_ID }, { }, }; MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match); @@ -78,6 +79,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = { { "axp223", 0 }, { "axp803", 0 }, { "axp806", 0 }, + { "axp15060", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 7720ac15c7d4..72b87aae60cc 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -43,6 +43,7 @@ static const char * const axp20x_model_names[] = { "AXP806", "AXP809", "AXP813", + "AXP15060", }; static const struct regmap_range axp152_writeable_ranges[] = { @@ -169,6 +170,31 @@ static const struct regmap_access_table axp806_volatile_table = { .n_yes_ranges = ARRAY_SIZE(axp806_volatile_ranges), }; +static const struct regmap_range axp15060_writeable_ranges[] = { + regmap_reg_range(AXP15060_PWR_OUT_CTRL1, AXP15060_DCDC_MODE_CTRL2), + regmap_reg_range(AXP15060_OUTPUT_MONITOR_DISCHARGE, AXP15060_CPUSLDO_V_CTRL), + regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ), + regmap_reg_range(AXP15060_PEK_KEY, AXP15060_PEK_KEY), + regmap_reg_range(AXP15060_IRQ1_EN, AXP15060_IRQ2_EN), + regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE), +}; + +static const struct regmap_range axp15060_volatile_ranges[] = { + regmap_reg_range(AXP15060_STARTUP_SRC, AXP15060_STARTUP_SRC), + regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ), + regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE), +}; + +static const struct regmap_access_table axp15060_writeable_table = { + .yes_ranges = axp15060_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp15060_writeable_ranges), +}; + +static const struct regmap_access_table axp15060_volatile_table = { + .yes_ranges = axp15060_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp15060_volatile_ranges), +}; + static const struct resource axp152_pek_resources[] = { DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"), DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"), @@ -237,6 +263,11 @@ static const struct resource axp809_pek_resources[] = { DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_FAL_EDGE, "PEK_DBF"), }; +static const struct resource axp15060_pek_resources[] = { + DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_RIS_EDGE, "PEK_DBR"), + DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_FAL_EDGE, "PEK_DBF"), +}; + static const struct regmap_config axp152_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -282,6 +313,15 @@ static const struct regmap_config axp806_regmap_config = { .cache_type = REGCACHE_RBTREE, }; +static const struct regmap_config axp15060_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp15060_writeable_table, + .volatile_table = &axp15060_volatile_table, + .max_register = AXP15060_IRQ2_STATE, + .cache_type = REGCACHE_RBTREE, +}; + #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } @@ -503,6 +543,23 @@ static const struct regmap_irq axp809_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0), }; +static const struct regmap_irq axp15060_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV1, 0, 0), + INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV2, 0, 1), + INIT_REGMAP_IRQ(AXP15060, DCDC1_V_LOW, 0, 2), + INIT_REGMAP_IRQ(AXP15060, DCDC2_V_LOW, 0, 3), + INIT_REGMAP_IRQ(AXP15060, DCDC3_V_LOW, 0, 4), + INIT_REGMAP_IRQ(AXP15060, DCDC4_V_LOW, 0, 5), + INIT_REGMAP_IRQ(AXP15060, DCDC5_V_LOW, 0, 6), + INIT_REGMAP_IRQ(AXP15060, DCDC6_V_LOW, 0, 7), + INIT_REGMAP_IRQ(AXP15060, PEK_LONG, 1, 0), + INIT_REGMAP_IRQ(AXP15060, PEK_SHORT, 1, 1), + INIT_REGMAP_IRQ(AXP15060, GPIO1_INPUT, 1, 2), + INIT_REGMAP_IRQ(AXP15060, PEK_FAL_EDGE, 1, 3), + INIT_REGMAP_IRQ(AXP15060, PEK_RIS_EDGE, 1, 4), + INIT_REGMAP_IRQ(AXP15060, GPIO2_INPUT, 1, 5), +}; + static const struct regmap_irq_chip axp152_regmap_irq_chip = { .name = "axp152_irq_chip", .status_base = AXP152_IRQ1_STATE, @@ -582,6 +639,17 @@ static const struct regmap_irq_chip axp809_regmap_irq_chip = { .num_regs = 5, }; +static const struct regmap_irq_chip axp15060_regmap_irq_chip = { + .name = "axp15060", + .status_base = AXP15060_IRQ1_STATE, + .ack_base = AXP15060_IRQ1_STATE, + .unmask_base = AXP15060_IRQ1_EN, + .init_ack_masked = true, + .irqs = axp15060_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp15060_regmap_irqs), + .num_regs = 2, +}; + static const struct mfd_cell axp20x_cells[] = { { .name = "axp20x-gpio", @@ -826,6 +894,23 @@ static const struct mfd_cell axp813_cells[] = { }, }; +static const struct mfd_cell axp15060_cells[] = { + { + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp15060_pek_resources), + .resources = axp15060_pek_resources, + }, { + .name = "axp20x-regulator", + }, +}; + +/* For boards that don't have IRQ line connected to SOC. */ +static const struct mfd_cell axp_regulator_only_cells[] = { + { + .name = "axp20x-regulator", + }, +}; + static int axp20x_power_off(struct sys_off_data *data) { struct axp20x_dev *axp20x = data->cb_data; @@ -935,6 +1020,28 @@ int axp20x_match_device(struct axp20x_dev *axp20x) */ axp20x->regmap_irq_chip = &axp803_regmap_irq_chip; break; + case AXP15060_ID: + /* + * Don't register the power key part if there is no interrupt + * line. + * + * Since most use cases of AXP PMICs are Allwinner SOCs, board + * designers follow Allwinner's reference design and connects + * IRQ line to SOC, there's no need for those variants to deal + * with cases that IRQ isn't connected. However, AXP15660 is + * used by some other vendors' SOCs that didn't connect IRQ + * line, we need to deal with this case. + */ + if (axp20x->irq > 0) { + axp20x->nr_cells = ARRAY_SIZE(axp15060_cells); + axp20x->cells = axp15060_cells; + } else { + axp20x->nr_cells = ARRAY_SIZE(axp_regulator_only_cells); + axp20x->cells = axp_regulator_only_cells; + } + axp20x->regmap_cfg = &axp15060_regmap_config; + axp20x->regmap_irq_chip = &axp15060_regmap_irq_chip; + break; default: dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); return -EINVAL; diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 2058194807bd..beb3f44f85c5 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -21,6 +21,7 @@ enum axp20x_variants { AXP806_ID, AXP809_ID, AXP813_ID, + AXP15060_ID, NR_AXP20X_VARIANTS, }; @@ -131,6 +132,39 @@ enum axp20x_variants { /* Other DCDC regulator control registers are the same as AXP803 */ #define AXP813_DCDC7_V_OUT 0x26 +#define AXP15060_STARTUP_SRC 0x00 +#define AXP15060_PWR_OUT_CTRL1 0x10 +#define AXP15060_PWR_OUT_CTRL2 0x11 +#define AXP15060_PWR_OUT_CTRL3 0x12 +#define AXP15060_DCDC1_V_CTRL 0x13 +#define AXP15060_DCDC2_V_CTRL 0x14 +#define AXP15060_DCDC3_V_CTRL 0x15 +#define AXP15060_DCDC4_V_CTRL 0x16 +#define AXP15060_DCDC5_V_CTRL 0x17 +#define AXP15060_DCDC6_V_CTRL 0x18 +#define AXP15060_ALDO1_V_CTRL 0x19 +#define AXP15060_DCDC_MODE_CTRL1 0x1a +#define AXP15060_DCDC_MODE_CTRL2 0x1b +#define AXP15060_OUTPUT_MONITOR_DISCHARGE 0x1e +#define AXP15060_IRQ_PWROK_VOFF 0x1f +#define AXP15060_ALDO2_V_CTRL 0x20 +#define AXP15060_ALDO3_V_CTRL 0x21 +#define AXP15060_ALDO4_V_CTRL 0x22 +#define AXP15060_ALDO5_V_CTRL 0x23 +#define AXP15060_BLDO1_V_CTRL 0x24 +#define AXP15060_BLDO2_V_CTRL 0x25 +#define AXP15060_BLDO3_V_CTRL 0x26 +#define AXP15060_BLDO4_V_CTRL 0x27 +#define AXP15060_BLDO5_V_CTRL 0x28 +#define AXP15060_CLDO1_V_CTRL 0x29 +#define AXP15060_CLDO2_V_CTRL 0x2a +#define AXP15060_CLDO3_V_CTRL 0x2b +#define AXP15060_CLDO4_V_CTRL 0x2d +#define AXP15060_CPUSLDO_V_CTRL 0x2e +#define AXP15060_PWR_WAKEUP_CTRL 0x31 +#define AXP15060_PWR_DISABLE_DOWN_SEQ 0x32 +#define AXP15060_PEK_KEY 0x36 + /* Interrupt */ #define AXP152_IRQ1_EN 0x40 #define AXP152_IRQ2_EN 0x41 @@ -152,6 +186,11 @@ enum axp20x_variants { #define AXP20X_IRQ5_STATE 0x4c #define AXP20X_IRQ6_STATE 0x4d +#define AXP15060_IRQ1_EN 0x40 +#define AXP15060_IRQ2_EN 0x41 +#define AXP15060_IRQ1_STATE 0x48 +#define AXP15060_IRQ2_STATE 0x49 + /* ADC */ #define AXP20X_ACIN_V_ADC_H 0x56 #define AXP20X_ACIN_V_ADC_L 0x57 @@ -222,6 +261,8 @@ enum axp20x_variants { #define AXP22X_GPIO_STATE 0x94 #define AXP22X_GPIO_PULL_DOWN 0x95 +#define AXP15060_CLDO4_GPIO2_MODESET 0x2c + /* Battery */ #define AXP20X_CHRG_CC_31_24 0xb0 #define AXP20X_CHRG_CC_23_16 0xb1 @@ -419,6 +460,33 @@ enum { AXP813_REG_ID_MAX, }; +enum { + AXP15060_DCDC1 = 0, + AXP15060_DCDC2, + AXP15060_DCDC3, + AXP15060_DCDC4, + AXP15060_DCDC5, + AXP15060_DCDC6, + AXP15060_ALDO1, + AXP15060_ALDO2, + AXP15060_ALDO3, + AXP15060_ALDO4, + AXP15060_ALDO5, + AXP15060_BLDO1, + AXP15060_BLDO2, + AXP15060_BLDO3, + AXP15060_BLDO4, + AXP15060_BLDO5, + AXP15060_CLDO1, + AXP15060_CLDO2, + AXP15060_CLDO3, + AXP15060_CLDO4, + AXP15060_CPUSLDO, + AXP15060_SW, + AXP15060_RTC_LDO, + AXP15060_REG_ID_MAX, +}; + /* IRQs */ enum { AXP152_IRQ_LDO0IN_CONNECT = 1, @@ -637,6 +705,23 @@ enum axp809_irqs { AXP809_IRQ_GPIO0_INPUT, }; +enum axp15060_irqs { + AXP15060_IRQ_DIE_TEMP_HIGH_LV1 = 1, + AXP15060_IRQ_DIE_TEMP_HIGH_LV2, + AXP15060_IRQ_DCDC1_V_LOW, + AXP15060_IRQ_DCDC2_V_LOW, + AXP15060_IRQ_DCDC3_V_LOW, + AXP15060_IRQ_DCDC4_V_LOW, + AXP15060_IRQ_DCDC5_V_LOW, + AXP15060_IRQ_DCDC6_V_LOW, + AXP15060_IRQ_PEK_LONG, + AXP15060_IRQ_PEK_SHORT, + AXP15060_IRQ_GPIO1_INPUT, + AXP15060_IRQ_PEK_FAL_EDGE, + AXP15060_IRQ_PEK_RIS_EDGE, + AXP15060_IRQ_GPIO2_INPUT, +}; + struct axp20x_dev { struct device *dev; int irq; |