summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/include/asm/wsp.h14
-rw-r--r--arch/powerpc/kernel/exceptions-64e.S23
-rw-r--r--arch/powerpc/platforms/Kconfig1
-rw-r--r--arch/powerpc/platforms/Makefile1
-rw-r--r--arch/powerpc/platforms/wsp/Kconfig28
-rw-r--r--arch/powerpc/platforms/wsp/Makefile6
-rw-r--r--arch/powerpc/platforms/wsp/ics.c712
-rw-r--r--arch/powerpc/platforms/wsp/ics.h20
-rw-r--r--arch/powerpc/platforms/wsp/opb_pic.c332
-rw-r--r--arch/powerpc/platforms/wsp/psr2.c95
-rw-r--r--arch/powerpc/platforms/wsp/scom_smp.c427
-rw-r--r--arch/powerpc/platforms/wsp/scom_wsp.c77
-rw-r--r--arch/powerpc/platforms/wsp/setup.c36
-rw-r--r--arch/powerpc/platforms/wsp/smp.c87
-rw-r--r--arch/powerpc/platforms/wsp/wsp.h17
-rw-r--r--arch/powerpc/sysdev/xics/icp-native.c1
16 files changed, 1877 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/wsp.h b/arch/powerpc/include/asm/wsp.h
new file mode 100644
index 000000000000..c7dc83088a33
--- /dev/null
+++ b/arch/powerpc/include/asm/wsp.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_WSP_H
+#define __ASM_POWERPC_WSP_H
+
+extern int wsp_get_chip_id(struct device_node *dn);
+
+#endif /* __ASM_POWERPC_WSP_H */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 23bd83b20be4..c98e9d260621 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -864,6 +864,20 @@ have_hes:
* that will have to be made dependent on whether we are running under
* a hypervisor I suppose.
*/
+
+ /* BEWARE, MAGIC
+ * This code is called as an ordinary function on the boot CPU. But to
+ * avoid duplication, this code is also used in SCOM bringup of
+ * secondary CPUs. We read the code between the initial_tlb_code_start
+ * and initial_tlb_code_end labels one instruction at a time and RAM it
+ * into the new core via SCOM. That doesn't process branches, so there
+ * must be none between those two labels. It also means if this code
+ * ever takes any parameters, the SCOM code must also be updated to
+ * provide them.
+ */
+ .globl a2_tlbinit_code_start
+a2_tlbinit_code_start:
+
ori r11,r3,MAS0_WQ_ALLWAYS
oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
mtspr SPRN_MAS0,r11
@@ -880,6 +894,9 @@ have_hes:
/* Write the TLB entry */
tlbwe
+ .globl a2_tlbinit_after_linear_map
+a2_tlbinit_after_linear_map:
+
/* Now we branch the new virtual address mapped by this entry */
LOAD_REG_IMMEDIATE(r3,1f)
mtctr r3
@@ -931,10 +948,16 @@ have_hes:
cmpw r3,r9
blt 2b
+ .globl a2_tlbinit_after_iprot_flush
+a2_tlbinit_after_iprot_flush:
+
PPC_TLBILX(0,0,0)
sync
isync
+ .globl a2_tlbinit_code_end
+a2_tlbinit_code_end:
+
/* We translate LR and return */
mflr r3
tovirt(r3,r3)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index f2352fc5cbbe..6059053e7158 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -20,6 +20,7 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig"
source "arch/powerpc/platforms/44x/Kconfig"
source "arch/powerpc/platforms/40x/Kconfig"
source "arch/powerpc/platforms/amigaone/Kconfig"
+source "arch/powerpc/platforms/wsp/Kconfig"
config KVM_GUEST
bool "KVM Guest support"
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index fdb9f0b0d7a8..73e2116cfeed 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_PPC_CELL) += cell/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/
obj-$(CONFIG_AMIGAONE) += amigaone/
+obj-$(CONFIG_PPC_WSP) += wsp/
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
new file mode 100644
index 000000000000..c3c48eb62cc1
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -0,0 +1,28 @@
+config PPC_WSP
+ bool
+ default n
+
+menu "WSP platform selection"
+ depends on PPC_BOOK3E_64
+
+config PPC_PSR2
+ bool "PSR-2 platform"
+ select PPC_A2
+ select GENERIC_TBSYNC
+ select PPC_SCOM
+ select EPAPR_BOOT
+ select PPC_WSP
+ select PPC_XICS
+ select PPC_ICP_NATIVE
+ default y
+
+endmenu
+
+config PPC_A2_DD2
+ bool "Support for DD2 based A2/WSP systems"
+ depends on PPC_A2
+
+config WORKAROUND_ERRATUM_463
+ depends on PPC_A2_DD2
+ bool "Workaround erratum 463"
+ default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
new file mode 100644
index 000000000000..095be73d6cd4
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -0,0 +1,6 @@
+ccflags-y += -mno-minimal-toc
+
+obj-y += setup.o ics.o
+obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o
+obj-$(CONFIG_PPC_WSP) += scom_wsp.o
+obj-$(CONFIG_SMP) += smp.o scom_smp.o
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
new file mode 100644
index 000000000000..e53bd9e7b125
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/ics.c
@@ -0,0 +1,712 @@
+/*
+ * Copyright 2008-2011 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/xics.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+
+/* WSP ICS */
+
+struct wsp_ics {
+ struct ics ics;
+ struct device_node *dn;
+ void __iomem *regs;
+ spinlock_t lock;
+ unsigned long *bitmap;
+ u32 chip_id;
+ u32 lsi_base;
+ u32 lsi_count;
+ u64 hwirq_start;
+ u64 count;
+#ifdef CONFIG_SMP
+ int *hwirq_cpu_map;
+#endif
+};
+
+#define to_wsp_ics(ics) container_of(ics, struct wsp_ics, ics)
+
+#define INT_SRC_LAYER_BUID_REG(base) ((base) + 0x00)
+#define IODA_TBL_ADDR_REG(base) ((base) + 0x18)
+#define IODA_TBL_DATA_REG(base) ((base) + 0x20)
+#define XIVE_UPDATE_REG(base) ((base) + 0x28)
+#define ICS_INT_CAPS_REG(base) ((base) + 0x30)
+
+#define TBL_AUTO_INCREMENT ((1UL << 63) | (1UL << 15))
+#define TBL_SELECT_XIST (1UL << 48)
+#define TBL_SELECT_XIVT (1UL << 49)
+
+#define IODA_IRQ(irq) ((irq) & (0x7FFULL)) /* HRM 5.1.3.4 */
+
+#define XIST_REQUIRED 0x8
+#define XIST_REJECTED 0x4
+#define XIST_PRESENTED 0x2
+#define XIST_PENDING 0x1
+
+#define XIVE_SERVER_SHIFT 42
+#define XIVE_SERVER_MASK 0xFFFFULL
+#define XIVE_PRIORITY_MASK 0xFFULL
+#define XIVE_PRIORITY_SHIFT 32
+#define XIVE_WRITE_ENABLE (1ULL << 63)
+
+/*
+ * The docs refer to a 6 bit field called ChipID, which consists of a
+ * 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero
+ * so we ignore it, and every where we use "chip id" in this code we
+ * mean the NodeID.
+ */
+#define WSP_ICS_CHIP_SHIFT 17
+
+
+static struct wsp_ics *ics_list;
+static int num_ics;
+
+/* ICS Source controller accessors */
+
+static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq)
+{
+ unsigned long flags;
+ u64 xive;
+
+ spin_lock_irqsave(&ics->lock, flags);
+ out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq));
+ xive = in_be64(IODA_TBL_DATA_REG(ics->regs));
+ spin_unlock_irqrestore(&ics->lock, flags);
+
+ return xive;
+}
+
+static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive)
+{
+ xive &= ~XIVE_ADDR_MASK;
+ xive |= (irq & XIVE_ADDR_MASK);
+ xive |= XIVE_WRITE_ENABLE;
+
+ out_be64(XIVE_UPDATE_REG(ics->regs), xive);
+}
+
+static u64 xive_set_server(u64 xive, unsigned int server)
+{
+ u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT);
+
+ xive &= mask;
+ xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT;
+
+ return xive;
+}
+
+static u64 xive_set_priority(u64 xive, unsigned int priority)
+{
+ u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT);
+
+ xive &= mask;
+ xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT;
+
+ return xive;
+}
+
+
+#ifdef CONFIG_SMP
+/* Find logical CPUs within mask on a given chip and store result in ret */
+void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret)
+{
+ int cpu, chip;
+ struct device_node *cpu_dn, *dn;
+ const u32 *prop;
+
+ cpumask_clear(ret);
+ for_each_cpu(cpu, mask) {
+ cpu_dn = of_get_cpu_node(cpu, NULL);
+ if (!cpu_dn)
+ continue;
+
+ prop = of_get_property(cpu_dn, "at-node", NULL);
+ if (!prop) {
+ of_node_put(cpu_dn);
+ continue;
+ }
+
+ dn = of_find_node_by_phandle(*prop);
+ of_node_put(cpu_dn);
+
+ chip = wsp_get_chip_id(dn);
+ if (chip == chip_id)
+ cpumask_set_cpu(cpu, ret);
+
+ of_node_put(dn);
+ }
+}
+
+/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */
+static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
+ const cpumask_t *affinity)
+{
+ cpumask_var_t avail, newmask;
+ int ret = -ENOMEM, cpu, cpu_rover = 0, target;
+ int index = hwirq - ics->hwirq_start;
+ unsigned int nodeid;
+
+ BUG_ON(index < 0 || index >= ics->count);
+
+ if (!ics->hwirq_cpu_map)
+ return -ENOMEM;
+
+ if (!distribute_irqs) {
+ ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server;
+ return 0;
+ }
+
+ /* Allocate needed CPU masks */
+ if (!alloc_cpumask_var(&avail, GFP_KERNEL))
+ goto ret;
+ if (!alloc_cpumask_var(&newmask, GFP_KERNEL))
+ goto freeavail;
+
+ /* Find PBus attached to the source of this IRQ */
+ nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */
+
+ /* Find CPUs that could handle this IRQ */
+ if (affinity)
+ cpumask_and(avail, cpu_online_mask, affinity);
+ else
+ cpumask_copy(avail, cpu_online_mask);
+
+ /* Narrow selection down to logical CPUs on the same chip */
+ cpus_on_chip(nodeid, avail, newmask);
+
+ /* Ensure we haven't narrowed it down to 0 */
+ if (unlikely(cpumask_empty(newmask))) {
+ if (unlikely(cpumask_empty(avail))) {
+ ret = -1;
+ goto out;
+ }
+ cpumask_copy(newmask, avail);
+ }
+
+ /* Choose a CPU out of those we narrowed it down to in round robin */
+ target = hwirq % cpumask_weight(newmask);
+ for_each_cpu(cpu, newmask) {
+ if (cpu_rover++ >= target) {
+ ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu);
+ ret = 0;
+ goto out;
+ }
+ }
+
+ /* Shouldn't happen */
+ WARN_ON(1);
+
+out:
+ free_cpumask_var(newmask);
+freeavail:
+ free_cpumask_var(avail);
+ret:
+ if (ret < 0) {
+ ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask);
+ pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n",
+ hwirq, ics->hwirq_cpu_map[index]);
+ }
+ return ret;
+}
+
+static void alloc_irq_map(struct wsp_ics *ics)
+{
+ int i;
+
+ ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL);
+ if (!ics->hwirq_cpu_map) {
+ pr_warning("Allocate hwirq_cpu_map failed, "
+ "IRQ balancing disabled\n");
+ return;
+ }
+
+ for (i=0; i < ics->count; i++)
+ ics->hwirq_cpu_map[i] = xics_default_server;
+}
+
+static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
+{
+ int index = hwirq - ics->hwirq_start;
+
+ BUG_ON(index < 0 || index >= ics->count);
+
+ if (!ics->hwirq_cpu_map)
+ return xics_default_server;
+
+ return ics->hwirq_cpu_map[index];
+}
+#else /* !CONFIG_SMP */
+static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
+ const cpumask_t *affinity)
+{
+ return 0;
+}
+
+static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
+{
+ return xics_default_server;
+}
+
+static void alloc_irq_map(struct wsp_ics *ics) { }
+#endif
+
+static void wsp_chip_unmask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct wsp_ics *ics;
+ int server;
+ u64 xive;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+
+ ics = d->chip_data;
+ if (WARN_ON(!ics))
+ return;
+
+ server = get_irq_server(ics, hw_irq);
+
+ xive = wsp_ics_get_xive(ics, hw_irq);
+ xive = xive_set_server(xive, server);
+ xive = xive_set_priority(xive, DEFAULT_PRIORITY);
+ wsp_ics_set_xive(ics, hw_irq, xive);
+}
+
+static unsigned int wsp_chip_startup(struct irq_data *d)
+{
+ /* unmask it */
+ wsp_chip_unmask_irq(d);
+ return 0;
+}
+
+static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics)
+{
+ u64 xive;
+
+ if (hw_irq == XICS_IPI)
+ return;
+
+ if (WARN_ON(!ics))
+ return;
+ xive = wsp_ics_get_xive(ics, hw_irq);
+ xive = xive_set_server(xive, xics_default_server);
+ xive = xive_set_priority(xive, LOWEST_PRIORITY);
+ wsp_ics_set_xive(ics, hw_irq, xive);
+}
+
+static void wsp_chip_mask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct wsp_ics *ics = d->chip_data;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+
+ wsp_mask_real_irq(hw_irq, ics);
+}
+
+static int wsp_chip_set_affinity(struct irq_data *d,
+ const struct cpumask *cpumask, bool force)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct wsp_ics *ics;
+ int ret;
+ u64 xive;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return -1;
+
+ ics = d->chip_data;
+ if (WARN_ON(!ics))
+ return -1;
+ xive = wsp_ics_get_xive(ics, hw_irq);
+
+ /*
+ * For the moment only implement delivery to all cpus or one cpu.
+ * Get current irq_server for the given irq
+ */
+ ret = cache_hwirq_map(ics, d->irq, cpumask);
+ if (ret == -1) {
+ char cpulist[128];
+ cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
+ pr_warning("%s: No online cpus in the mask %s for irq %d\n",
+ __func__, cpulist, d->irq);
+ return -1;
+ } else if (ret == -ENOMEM) {
+ pr_warning("%s: Out of memory\n", __func__);
+ return -1;
+ }
+
+ xive = xive_set_server(xive, get_irq_server(ics, hw_irq));
+ wsp_ics_set_xive(ics, hw_irq, xive);
+
+ return 0;
+}
+
+static struct irq_chip wsp_irq_chip = {
+ .name = "WSP ICS",
+ .irq_startup = wsp_chip_startup,
+ .irq_mask = wsp_chip_mask_irq,
+ .irq_unmask = wsp_chip_unmask_irq,
+ .irq_set_affinity = wsp_chip_set_affinity
+};
+
+static int wsp_ics_host_match(struct ics *ics, struct device_node *dn)
+{
+ /* All ICSs in the system implement a global irq number space,
+ * so match against them all. */
+ return of_device_is_compatible(dn, "ibm,ppc-xics");
+}
+
+static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq)
+{
+ if (hwirq >= wsp_ics->hwirq_start &&
+ hwirq < wsp_ics->hwirq_start + wsp_ics->count)
+ return 1;
+
+ return 0;
+}
+
+static int wsp_ics_map(struct ics *ics, unsigned int virq)
+{
+ struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+ unsigned int hw_irq = virq_to_hw(virq);
+ unsigned long flags;
+
+ if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+ return -ENOENT;
+
+ irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq);
+
+ irq_set_chip_data(virq, wsp_ics);
+
+ spin_lock_irqsave(&wsp_ics->lock, flags);
+ bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0);
+ spin_unlock_irqrestore(&wsp_ics->lock, flags);
+
+ return 0;
+}
+
+static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq)
+{
+ struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+
+ if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+ return;
+
+ pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq);
+ wsp_mask_real_irq(hw_irq, wsp_ics);
+}
+
+static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq)
+{
+ struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+
+ if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+ return -ENOENT;
+
+ return get_irq_server(wsp_ics, hw_irq);
+}
+
+/* HW Number allocation API */
+
+static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn)
+{
+ struct device_node *iparent;
+ int i;
+
+ iparent = of_irq_find_parent(dn);
+ if (!iparent) {
+ pr_err("wsp_ics: Failed to find interrupt parent!\n");
+ return NULL;
+ }
+
+ for(i = 0; i < num_ics; i++) {
+ if(ics_list[i].dn == iparent)
+ break;
+ }
+
+ if (i >= num_ics) {
+ pr_err("wsp_ics: Unable to find parent bitmap!\n");
+ return NULL;
+ }
+
+ return &ics_list[i];
+}
+
+int wsp_ics_alloc_irq(struct device_node *dn, int num)
+{
+ struct wsp_ics *ics;
+ int order, offset;
+
+ ics = wsp_ics_find_dn_ics(dn);
+ if (!ics)
+ return -ENODEV;
+
+ /* Fast, but overly strict if num isn't a power of two */
+ order = get_count_order(num);
+
+ spin_lock_irq(&ics->lock);
+ offset = bitmap_find_free_region(ics->bitmap, ics->count, order);
+ spin_unlock_irq(&ics->lock);
+
+ if (offset < 0)
+ return offset;
+
+ return offset + ics->hwirq_start;
+}
+
+void wsp_ics_free_irq(struct device_node *dn, unsigned int irq)
+{
+ struct wsp_ics *ics;
+
+ ics = wsp_ics_find_dn_ics(dn);
+ if (WARN_ON(!ics))
+ return;
+
+ spin_lock_irq(&ics->lock);
+ bitmap_release_region(ics->bitmap, irq, 0);
+ spin_unlock_irq(&ics->lock);
+}
+
+/* Initialisation */
+
+static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics,
+ struct device_node *dn)
+{
+ int len, i, j, size;
+ u32 start, count;
+ const u32 *p;
+
+ size = BITS_TO_LONGS(ics->count) * sizeof(long);
+ ics->bitmap = kzalloc(size, GFP_KERNEL);
+ if (!ics->bitmap) {
+ pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&ics->lock);
+
+ p = of_get_property(dn, "available-ranges", &len);
+ if (!p || !len) {
+ /* FIXME this should be a WARN() once mambo is updated */
+ pr_err("wsp_ics: No available-ranges defined for %s\n",
+ dn->full_name);
+ return 0;
+ }
+
+ if (len % (2 * sizeof(u32)) != 0) {
+ /* FIXME this should be a WARN() once mambo is updated */
+ pr_err("wsp_ics: Invalid available-ranges for %s\n",
+ dn->full_name);
+ return 0;
+ }
+
+ bitmap_fill(ics->bitmap, ics->count);
+
+ for (i = 0; i < len / sizeof(u32); i += 2) {
+ start = of_read_number(p + i, 1);
+ count = of_read_number(p + i + 1, 1);
+
+ pr_devel("%s: start: %d count: %d\n", __func__, start, count);
+
+ if ((start + count) > (ics->hwirq_start + ics->count) ||
+ start < ics->hwirq_start) {
+ pr_err("wsp_ics: Invalid range! -> %d to %d\n",
+ start, start + count);
+ break;
+ }
+
+ for (j = 0; j < count; j++)
+ bitmap_release_region(ics->bitmap,
+ (start + j) - ics->hwirq_start, 0);
+ }
+
+ /* Ensure LSIs are not available for allocation */
+ bitmap_allocate_region(ics->bitmap, ics->lsi_base,
+ get_count_order(ics->lsi_count));
+
+ return 0;
+}
+
+static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn)
+{
+ u32 lsi_buid, msi_buid, msi_base, msi_count;
+ void __iomem *regs;
+ const u32 *p;
+ int rc, len, i;
+ u64 caps, buid;
+
+ p = of_get_property(dn, "interrupt-ranges", &len);
+ if (!p || len < (2 * sizeof(u32))) {
+ pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n",
+ dn->full_name);
+ return -ENOENT;
+ }
+
+ if (len > (2 * sizeof(u32))) {
+ pr_err("wsp_ics: Multiple ics ranges not supported.\n");
+ return -EINVAL;
+ }
+
+ regs = of_iomap(dn, 0);
+ if (!regs) {
+ pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name);
+ return -ENXIO;
+ }
+
+ ics->hwirq_start = of_read_number(p, 1);
+ ics->count = of_read_number(p + 1, 1);
+ ics->regs = regs;
+
+ ics->chip_id = wsp_get_chip_id(dn);
+ if (WARN_ON(ics->chip_id < 0))
+ ics->chip_id = 0;
+
+ /* Get some informations about the critter */
+ caps = in_be64(ICS_INT_CAPS_REG(ics->regs));
+ buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs));
+ ics->lsi_count = caps >> 56;
+ msi_count = (caps >> 44) & 0x7ff;
+
+ /* Note: LSI BUID is 9 bits, but really only 3 are BUID and the
+ * rest is mixed in the interrupt number. We store the whole
+ * thing though
+ */
+ lsi_buid = (buid >> 48) & 0x1ff;
+ ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5;
+ msi_buid = (buid >> 37) & 0x7;
+ msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11;
+
+ pr_info("wsp_ics: Found %s\n", dn->full_name);
+ pr_info("wsp_ics: irq range : 0x%06llx..0x%06llx\n",
+ ics->hwirq_start, ics->hwirq_start + ics->count - 1);
+ pr_info("wsp_ics: %4d LSIs : 0x%06x..0x%06x\n",
+ ics->lsi_count, ics->lsi_base,
+ ics->lsi_base + ics->lsi_count - 1);
+ pr_info("wsp_ics: %4d MSIs : 0x%06x..0x%06x\n",
+ msi_count, msi_base,
+ msi_base + msi_count - 1);
+
+ /* Let's check the HW config is sane */
+ if (ics->lsi_base < ics->hwirq_start ||
+ (ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count))
+ pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n");
+ if (msi_base < ics->hwirq_start ||
+ (msi_base + msi_count) > (ics->hwirq_start + ics->count))
+ pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n");
+
+ /* We don't check for overlap between LSI and MSI, which will happen
+ * if we use the same BUID, I'm not sure yet how legit that is.
+ */
+
+ rc = wsp_ics_bitmap_setup(ics, dn);
+ if (rc) {
+ iounmap(regs);
+ return rc;
+ }
+
+ ics->dn = of_node_get(dn);
+ alloc_irq_map(ics);
+
+ for(i = 0; i < ics->count; i++)
+ wsp_mask_real_irq(ics->hwirq_start + i, ics);
+
+ ics->ics.map = wsp_ics_map;
+ ics->ics.mask_unknown = wsp_ics_mask_unknown;
+ ics->ics.get_server = wsp_ics_get_server;
+ ics->ics.host_match = wsp_ics_host_match;
+
+ xics_register_ics(&ics->ics);
+
+ return 0;
+}
+
+static void __init wsp_ics_set_default_server(void)
+{
+ struct device_node *np;
+ u32 hwid;
+
+ /* Find the server number for the boot cpu. */
+ np = of_get_cpu_node(boot_cpuid, NULL);
+ BUG_ON(!np);
+
+ hwid = get_hard_smp_processor_id(boot_cpuid);
+
+ pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name);
+ xics_default_server = hwid;
+
+ of_node_put(np);
+}
+
+static int __init wsp_ics_init(void)
+{
+ struct device_node *dn;
+ struct wsp_ics *ics;
+ int rc, found;
+
+ wsp_ics_set_default_server();
+
+ found = 0;
+ for_each_compatible_node(dn, NULL, "ibm,ppc-xics")
+ found++;
+
+ if (found == 0) {
+ pr_err("wsp_ics: No ICS's found!\n");
+ return -ENODEV;
+ }
+
+ ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL);
+ if (!ics_list) {
+ pr_err("wsp_ics: No memory for structs.\n");
+ return -ENOMEM;
+ }
+
+ num_ics = 0;
+ ics = ics_list;
+ for_each_compatible_node(dn, NULL, "ibm,wsp-xics") {
+ rc = wsp_ics_setup(ics, dn);
+ if (rc == 0) {
+ ics++;
+ num_ics++;
+ }
+ }
+
+ if (found != num_ics) {
+ pr_err("wsp_ics: Failed setting up %d ICS's\n",
+ found - num_ics);
+ return -1;
+ }
+
+ return 0;
+}
+
+void __init wsp_init_irq(void)
+{
+ wsp_ics_init();
+ xics_init();
+
+ /* We need to patch our irq chip's EOI to point to the right ICP */
+ wsp_irq_chip.irq_eoi = icp_ops->eoi;
+}
diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h
new file mode 100644
index 000000000000..e34d53102640
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/ics.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2009 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ICS_H
+#define __ICS_H
+
+#define XIVE_ADDR_MASK 0x7FFULL
+
+extern void wsp_init_irq(void);
+
+extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
+extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
+
+#endif /* __ICS_H */
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
new file mode 100644
index 000000000000..be05631a3c1c
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -0,0 +1,332 @@
+/*
+ * IBM Onboard Peripheral Bus Interrupt Controller
+ *
+ * Copyright 2010 Jack Miller, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#include <asm/reg_a2.h>
+#include <asm/irq.h>
+
+#define OPB_NR_IRQS 32
+
+#define OPB_MLSASIER 0x04 /* MLS Accumulated Status IER */
+#define OPB_MLSIR 0x50 /* MLS Interrupt Register */
+#define OPB_MLSIER 0x54 /* MLS Interrupt Enable Register */
+#define OPB_MLSIPR 0x58 /* MLS Interrupt Polarity Register */
+#define OPB_MLSIIR 0x5c /* MLS Interrupt Inputs Register */
+
+static int opb_index = 0;
+
+struct opb_pic {
+ struct irq_host *host;
+ void *regs;
+ int index;
+ spinlock_t lock;
+};
+
+static u32 opb_in(struct opb_pic *opb, int offset)
+{
+ return in_be32(opb->regs + offset);
+}
+
+static void opb_out(struct opb_pic *opb, int offset, u32 val)
+{
+ out_be32(opb->regs + offset, val);
+}
+
+static void opb_unmask_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 ier, bitset;
+
+ opb = d->chip_data;
+ bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ier = opb_in(opb, OPB_MLSIER);
+ opb_out(opb, OPB_MLSIER, ier | bitset);
+ ier = opb_in(opb, OPB_MLSIER);
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 ier, mask;
+
+ opb = d->chip_data;
+ mask = ~(1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ier = opb_in(opb, OPB_MLSIER);
+ opb_out(opb, OPB_MLSIER, ier & mask);
+ ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_ack_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 bitset;
+
+ opb = d->chip_data;
+ bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ opb_out(opb, OPB_MLSIR, bitset);
+ opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_ack_irq(struct irq_data *d)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ u32 bitset;
+ u32 ier, ir;
+
+ opb = d->chip_data;
+ bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ier = opb_in(opb, OPB_MLSIER);
+ opb_out(opb, OPB_MLSIER, ier & ~bitset);
+ ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+ opb_out(opb, OPB_MLSIR, bitset);
+ ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
+{
+ struct opb_pic *opb;
+ unsigned long flags;
+ int invert, ipr, mask, bit;
+
+ opb = d->chip_data;
+
+ /* The only information we're interested in in the type is whether it's
+ * a high or low trigger. For high triggered interrupts, the polarity
+ * set for it in the MLS Interrupt Polarity Register is 0, for low
+ * interrupts it's 1 so that the proper input in the MLS Interrupt Input
+ * Register is interrupted as asserting the interrupt. */
+
+ switch (flow) {
+ case IRQ_TYPE_NONE:
+ opb_mask_irq(d);
+ return 0;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ invert = 0;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ invert = 1;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ bit = (1 << (31 - irqd_to_hwirq(d)));
+ mask = ~bit;
+
+ spin_lock_irqsave(&opb->lock, flags);
+
+ ipr = opb_in(opb, OPB_MLSIPR);
+ ipr = (ipr & mask) | (invert ? bit : 0);
+ opb_out(opb, OPB_MLSIPR, ipr);
+ ipr = opb_in(opb, OPB_MLSIPR); // Flush posted writes
+
+ spin_unlock_irqrestore(&opb->lock, flags);
+
+ /* Record the type in the interrupt descriptor */
+ irqd_set_trigger_type(d, flow);
+
+ return 0;
+}
+
+static struct irq_chip opb_irq_chip = {
+ .name = "OPB",
+ .irq_mask = opb_mask_irq,
+ .irq_unmask = opb_unmask_irq,
+ .irq_mask_ack = opb_mask_ack_irq,
+ .irq_ack = opb_ack_irq,
+ .irq_set_type = opb_set_irq_type
+};
+
+static int opb_host_map(struct irq_host *host, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct opb_pic *opb;
+
+ opb = host->host_data;
+
+ /* Most of the important stuff is handled by the generic host code, like
+ * the lookup, so just attach some info to the virtual irq */
+
+ irq_set_chip_data(virq, opb);
+ irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static int opb_host_xlate(struct irq_host *host, struct device_node *dn,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ /* Interrupt size must == 2 */
+ BUG_ON(intsize != 2);
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1];
+ return 0;
+}
+
+static struct irq_host_ops opb_host_ops = {
+ .map = opb_host_map,
+ .xlate = opb_host_xlate,
+};
+
+irqreturn_t opb_irq_handler(int irq, void *private)
+{
+ struct opb_pic *opb;
+ u32 ir, src, subvirq;
+
+ opb = (struct opb_pic *) private;
+
+ /* Read the OPB MLS Interrupt Register for
+ * asserted interrupts */
+ ir = opb_in(opb, OPB_MLSIR);
+ if (!ir)
+ return IRQ_NONE;
+
+ do {
+ /* Get 1 - 32 source, *NOT* bit */
+ src = 32 - ffs(ir);
+
+ /* Translate from the OPB's conception of interrupt number to
+ * Linux's virtual IRQ */
+
+ subvirq = irq_linear_revmap(opb->host, src);
+
+ generic_handle_irq(subvirq);
+ } while ((ir = opb_in(opb, OPB_MLSIR)));
+
+ return IRQ_HANDLED;
+}
+
+struct opb_pic *opb_pic_init_one(struct device_node *dn)
+{
+ struct opb_pic *opb;
+ struct resource res;
+
+ if (of_address_to_resource(dn, 0, &res)) {
+ printk(KERN_ERR "opb: Couldn't translate resource\n");
+ return NULL;
+ }
+
+ opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
+ if (!opb) {
+ printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
+ return NULL;
+ }
+
+ /* Get access to the OPB MMIO registers */
+ opb->regs = ioremap(res.start + 0x10000, 0x1000);
+ if (!opb->regs) {
+ printk(KERN_ERR "opb: Failed to allocate register space!\n");
+ goto free_opb;
+ }
+
+ /* Allocate an irq host so that Linux knows that despite only
+ * having one interrupt to issue, we're the controller for multiple
+ * hardware IRQs, so later we can lookup their virtual IRQs. */
+
+ opb->host = irq_alloc_host(dn, IRQ_HOST_MAP_LINEAR,
+ OPB_NR_IRQS, &opb_host_ops, -1);
+
+ if (!opb->host) {
+ printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
+ goto free_regs;
+ }
+
+ opb->index = opb_index++;
+ spin_lock_init(&opb->lock);
+ opb->host->host_data = opb;
+
+ /* Disable all interrupts by default */
+ opb_out(opb, OPB_MLSASIER, 0);
+ opb_out(opb, OPB_MLSIER, 0);
+
+ /* ACK any interrupts left by FW */
+ opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
+
+ return opb;
+
+free_regs:
+ iounmap(opb->regs);
+free_opb:
+ kfree(opb);
+ return NULL;
+}
+
+void __init opb_pic_init(void)
+{
+ struct device_node *dn;
+ struct opb_pic *opb;
+ int virq;
+ int rc;
+
+ /* Call init_one for each OPB device */
+ for_each_compatible_node(dn, NULL, "ibm,opb") {
+
+ /* Fill in an OPB struct */
+ opb = opb_pic_init_one(dn);
+ if (!opb) {
+ printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
+ continue;
+ }
+
+ /* Map / get opb's hardware virtual irq */
+ virq = irq_of_parse_and_map(dn, 0);
+ if (virq <= 0) {
+ printk("opb: irq_op_parse_and_map failed!\n");
+ continue;
+ }
+
+ /* Attach opb interrupt handler to new virtual IRQ */
+ rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+ if (rc) {
+ printk("opb: request_irq failed: %d\n", rc);
+ continue;
+ }
+
+ printk("OPB%d init with %d IRQs at %p\n", opb->index,
+ OPB_NR_IRQS, opb->regs);
+ }
+}
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
new file mode 100644
index 000000000000..40f28916ff6c
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+
+static void psr2_spin(void)
+{
+ hard_irq_disable();
+ for (;;) ;
+}
+
+static void psr2_restart(char *cmd)
+{
+ psr2_spin();
+}
+
+static int psr2_probe_devices(void)
+{
+ struct device_node *np;
+
+ /* Our RTC is a ds1500. It seems to be programatically compatible
+ * with the ds1511 for which we have a driver so let's use that
+ */
+ np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+ if (np != NULL) {
+ struct resource res;
+ if (of_address_to_resource(np, 0, &res) == 0)
+ platform_device_register_simple("ds1511", 0, &res, 1);
+ }
+ return 0;
+}
+machine_arch_initcall(psr2_md, psr2_probe_devices);
+
+static void __init psr2_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ scom_init_wsp();
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ a2_setup_smp();
+#endif
+}
+
+static int __init psr2_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
+ return 0;
+
+ return 1;
+}
+
+static void __init psr2_init_irq(void)
+{
+ wsp_init_irq();
+ opb_pic_init();
+}
+
+define_machine(psr2_md) {
+ .name = "PSR2 A2",
+ .probe = psr2_probe,
+ .setup_arch = psr2_setup_arch,
+ .restart = psr2_restart,
+ .power_off = psr2_spin,
+ .halt = psr2_spin,
+ .calibrate_decr = generic_calibrate_decr,
+ .init_IRQ = psr2_init_irq,
+ .progress = udbg_progress,
+ .power_save = book3e_idle,
+};
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
new file mode 100644
index 000000000000..141e78032097
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/scom_smp.c
@@ -0,0 +1,427 @@
+/*
+ * SCOM support for A2 platforms
+ *
+ * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson,
+ * Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg_a2.h>
+#include <asm/scom.h>
+#include <asm/udbg.h>
+
+#include "wsp.h"
+
+#define SCOM_RAMC 0x2a /* Ram Command */
+#define SCOM_RAMC_TGT1_EXT 0x80000000
+#define SCOM_RAMC_SRC1_EXT 0x40000000
+#define SCOM_RAMC_SRC2_EXT 0x20000000
+#define SCOM_RAMC_SRC3_EXT 0x10000000
+#define SCOM_RAMC_ENABLE 0x00080000
+#define SCOM_RAMC_THREADSEL 0x00060000
+#define SCOM_RAMC_EXECUTE 0x00010000
+#define SCOM_RAMC_MSR_OVERRIDE 0x00008000
+#define SCOM_RAMC_MSR_PR 0x00004000
+#define SCOM_RAMC_MSR_GS 0x00002000
+#define SCOM_RAMC_FORCE 0x00001000
+#define SCOM_RAMC_FLUSH 0x00000800
+#define SCOM_RAMC_INTERRUPT 0x00000004
+#define SCOM_RAMC_ERROR 0x00000002
+#define SCOM_RAMC_DONE 0x00000001
+#define SCOM_RAMI 0x29 /* Ram Instruction */
+#define SCOM_RAMIC 0x28 /* Ram Instruction and Command */
+#define SCOM_RAMIC_INSN 0xffffffff00000000
+#define SCOM_RAMD 0x2d /* Ram Data */
+#define SCOM_RAMDH 0x2e /* Ram Data High */
+#define SCOM_RAMDL 0x2f /* Ram Data Low */
+#define SCOM_PCCR0 0x33 /* PC Configuration Register 0 */
+#define SCOM_PCCR0_ENABLE_DEBUG 0x80000000
+#define SCOM_PCCR0_ENABLE_RAM 0x40000000
+#define SCOM_THRCTL 0x30 /* Thread Control and Status */
+#define SCOM_THRCTL_T0_STOP 0x80000000
+#define SCOM_THRCTL_T1_STOP 0x40000000
+#define SCOM_THRCTL_T2_STOP 0x20000000
+#define SCOM_THRCTL_T3_STOP 0x10000000
+#define SCOM_THRCTL_T0_STEP 0x08000000
+#define SCOM_THRCTL_T1_STEP 0x04000000
+#define SCOM_THRCTL_T2_STEP 0x02000000
+#define SCOM_THRCTL_T3_STEP 0x01000000
+#define SCOM_THRCTL_T0_RUN 0x00800000
+#define SCOM_THRCTL_T1_RUN 0x00400000
+#define SCOM_THRCTL_T2_RUN 0x00200000
+#define SCOM_THRCTL_T3_RUN 0x00100000
+#define SCOM_THRCTL_T0_PM 0x00080000
+#define SCOM_THRCTL_T1_PM 0x00040000
+#define SCOM_THRCTL_T2_PM 0x00020000
+#define SCOM_THRCTL_T3_PM 0x00010000
+#define SCOM_THRCTL_T0_UDE 0x00008000
+#define SCOM_THRCTL_T1_UDE 0x00004000
+#define SCOM_THRCTL_T2_UDE 0x00002000
+#define SCOM_THRCTL_T3_UDE 0x00001000
+#define SCOM_THRCTL_ASYNC_DIS 0x00000800
+#define SCOM_THRCTL_TB_DIS 0x00000400
+#define SCOM_THRCTL_DEC_DIS 0x00000200
+#define SCOM_THRCTL_AND 0x31 /* Thread Control and Status */
+#define SCOM_THRCTL_OR 0x32 /* Thread Control and Status */
+
+
+static DEFINE_PER_CPU(scom_map_t, scom_ptrs);
+
+static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread)
+{
+ scom_map_t scom = per_cpu(scom_ptrs, cpu);
+ int tcpu;
+
+ if (scom_map_ok(scom)) {
+ *first_thread = 0;
+ return scom;
+ }
+
+ *first_thread = 1;
+
+ scom = scom_map_device(np, 0);
+
+ for (tcpu = cpu_first_thread_sibling(cpu);
+ tcpu <= cpu_last_thread_sibling(cpu); tcpu++)
+ per_cpu(scom_ptrs, tcpu) = scom;
+
+ /* Hack: for the boot core, this will actually get called on
+ * the second thread up, not the first so our test above will
+ * set first_thread incorrectly. */
+ if (cpu_first_thread_sibling(cpu) == 0)
+ *first_thread = 0;
+
+ return scom;
+}
+
+static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
+{
+ u64 cmd, mask, val;
+ int n = 0;
+
+ cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28)
+ | ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE;
+ mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR;
+
+ scom_write(scom, SCOM_RAMIC, cmd);
+
+ while (!((val = scom_read(scom, SCOM_RAMC)) & mask)) {
+ pr_devel("Waiting on RAMC = 0x%llx\n", val);
+ if (++n == 3) {
+ pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
+ insn, thread);
+ return -1;
+ }
+ }
+
+ if (val & SCOM_RAMC_INTERRUPT) {
+ pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n",
+ insn, thread);
+ return -SCOM_RAMC_INTERRUPT;
+ }
+
+ if (val & SCOM_RAMC_ERROR) {
+ pr_err("RAMC error on instruction 0x%08x, thread %d\n",
+ insn, thread);
+ return -SCOM_RAMC_ERROR;
+ }
+
+ return 0;
+}
+
+static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
+ u64 *out_gpr)
+{
+ int rc;
+
+ /* or rN, rN, rN */
+ u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11);
+ rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0);
+ if (rc)
+ return rc;
+
+ *out_gpr = scom_read(scom, SCOM_RAMD);
+
+ return 0;
+}
+
+static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
+{
+ int rc, sprhi, sprlo;
+ u32 insn;
+
+ sprhi = spr >> 5;
+ sprlo = spr & 0x1f;
+ insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */
+
+ if (spr == 0x0ff0)
+ insn = 0x7c2000a6; /* mfmsr r1 */
+
+ rc = a2_scom_ram(scom, thread, insn, 0xf);
+ if (rc)
+ return rc;
+ return a2_scom_getgpr(scom, thread, 1, 1, out_spr);
+}
+
+static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr,
+ int alt, u64 val)
+{
+ u32 lis = 0x3c000000 | (gpr << 21);
+ u32 li = 0x38000000 | (gpr << 21);
+ u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16);
+ u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16);
+ u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16);
+ u32 highest = val >> 48;
+ u32 higher = (val >> 32) & 0xffff;
+ u32 high = (val >> 16) & 0xffff;
+ u32 low = val & 0xffff;
+ int lext = alt ? 0x8 : 0x0;
+ int oext = alt ? 0xf : 0x0;
+ int rc = 0;
+
+ if (highest)
+ rc |= a2_scom_ram(scom, thread, lis | highest, lext);
+
+ if (higher) {
+ if (highest)
+ rc |= a2_scom_ram(scom, thread, oris | higher, oext);
+ else
+ rc |= a2_scom_ram(scom, thread, li | higher, lext);
+ }
+
+ if (highest || higher)
+ rc |= a2_scom_ram(scom, thread, rldicr32, oext);
+
+ if (high) {
+ if (highest || higher)
+ rc |= a2_scom_ram(scom, thread, oris | high, oext);
+ else
+ rc |= a2_scom_ram(scom, thread, lis | high, lext);
+ }
+
+ if (highest || higher || high)
+ rc |= a2_scom_ram(scom, thread, ori | low, oext);
+ else
+ rc |= a2_scom_ram(scom, thread, li | low, lext);
+
+ return rc;
+}
+
+static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val)
+{
+ int sprhi = spr >> 5;
+ int sprlo = spr & 0x1f;
+ /* mtspr spr, r1 */
+ u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11);
+
+ if (spr == 0x0ff0)
+ insn = 0x7c200124; /* mtmsr r1 */
+
+ if (a2_scom_setgpr(scom, thread, 1, 1, val))
+ return -1;
+
+ return a2_scom_ram(scom, thread, insn, 0xf);
+}
+
+static int a2_scom_initial_tlb(scom_map_t scom, int thread)
+{
+ extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[];
+ extern u32 a2_tlbinit_after_iprot_flush[];
+ extern u32 a2_tlbinit_after_linear_map[];
+ u32 assoc, entries, i;
+ u64 epn, tlbcfg;
+ u32 *p;
+ int rc;
+
+ /* Invalidate all entries (including iprot) */
+
+ rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg);
+ if (rc)
+ goto scom_fail;
+ entries = tlbcfg & TLBnCFG_N_ENTRY;
+ assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24;
+ epn = 0;
+
+ /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
+ a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531);
+ /* Set MMUCR3 to write all thids bit to the TLB */
+ a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f);
+
+ /* Set MAS1 for 1G page size, and MAS2 to our initial EPN */
+ a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB));
+ a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
+ for (i = 0; i < entries; i++) {
+
+ a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc));
+
+ /* tlbwe */
+ rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0);
+ if (rc)
+ goto scom_fail;
+
+ /* Next entry is new address? */
+ if((i + 1) % assoc == 0) {
+ epn += (1 << 30);
+ a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
+ }
+ }
+
+ /* Setup args for linear mapping */
+ rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0));
+ if (rc)
+ goto scom_fail;
+
+ /* Linear mapping */
+ for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) {
+ rc = a2_scom_ram(scom, thread, *p, 0);
+ if (rc)
+ goto scom_fail;
+ }
+
+ /*
+ * For the boot thread, between the linear mapping and the debug
+ * mappings there is a loop to flush iprot mappings. Ramming doesn't do
+ * branches, but the secondary threads don't need to be nearly as smart
+ * (i.e. we don't need to worry about invalidating the mapping we're
+ * standing on).
+ */
+
+ /* Debug mappings. Expects r11 = MAS0 from linear map (set above) */
+ for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) {
+ rc = a2_scom_ram(scom, thread, *p, 0);
+ if (rc)
+ goto scom_fail;
+ }
+
+scom_fail:
+ if (rc)
+ pr_err("Setting up initial TLB failed, err %d\n", rc);
+
+ if (rc == -SCOM_RAMC_INTERRUPT) {
+ /* Interrupt, dump some status */
+ int rc[10];
+ u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2;
+ rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar);
+ rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0);
+ rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1);
+ rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr);
+ rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0);
+ rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1);
+ rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2);
+ rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3);
+ rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8);
+ rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2);
+ pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]);
+ pr_err(" retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]);
+ pr_err(" retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]);
+ pr_err(" retreived ESR =0x%llx (err %d)\n", esr, rc[3]);
+ pr_err(" retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]);
+ pr_err(" retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]);
+ pr_err(" retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]);
+ pr_err(" retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]);
+ pr_err(" retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]);
+ pr_err(" retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]);
+ }
+
+ return rc;
+}
+
+int __devinit a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
+ struct device_node *np)
+{
+ u64 init_iar, init_msr, init_ccr2;
+ unsigned long start_here;
+ int rc, core_setup;
+ scom_map_t scom;
+ u64 pccr0;
+
+ scom = get_scom(lcpu, np, &core_setup);
+ if (!scom) {
+ printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu);
+ return -1;
+ }
+
+ pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
+
+ pccr0 = scom_read(scom, SCOM_PCCR0);
+ scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
+ SCOM_PCCR0_ENABLE_RAM);
+
+ /* Stop the thead with THRCTL. If we are setting up the TLB we stop all
+ * threads. We also disable asynchronous interrupts while RAMing.
+ */
+ if (core_setup)
+ scom_write(scom, SCOM_THRCTL_OR,
+ SCOM_THRCTL_T0_STOP |
+ SCOM_THRCTL_T1_STOP |
+ SCOM_THRCTL_T2_STOP |
+ SCOM_THRCTL_T3_STOP |
+ SCOM_THRCTL_ASYNC_DIS);
+ else
+ scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx);
+
+ /* Flush its pipeline just in case */
+ scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) |
+ SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE);
+
+ a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar);
+ a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr);
+ a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2);
+
+ /* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */
+ rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM);
+ if (rc) {
+ pr_err("Failed to set MSR ! err %d\n", rc);
+ return rc;
+ }
+
+ /* RAM in an sync/isync for the sake of it */
+ a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0);
+ a2_scom_ram(scom, thr_idx, 0x4c00012c, 0);
+
+ if (core_setup) {
+ pr_devel("CPU%d is first thread in core, initializing TLB...\n",
+ lcpu);
+ rc = a2_scom_initial_tlb(scom, thr_idx);
+ if (rc)
+ goto fail;
+ }
+
+ start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
+ : generic_secondary_thread_init);
+ pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
+
+ rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here);
+ rc |= a2_scom_setgpr(scom, thr_idx, 3, 0,
+ get_hard_smp_processor_id(lcpu));
+ /*
+ * Tell book3e_secondary_core_init not to set up the TLB, we've
+ * already done that.
+ */
+ rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1);
+
+ rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx);
+
+ scom_write(scom, SCOM_RAMC, 0);
+ scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx));
+ scom_write(scom, SCOM_PCCR0, pccr0);
+fail:
+ pr_devel(" SCOM initialization %s\n", rc ? "failed" : "succeeded");
+ if (rc) {
+ pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n",
+ init_iar, init_msr, init_ccr2);
+ }
+
+ return rc;
+}
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
new file mode 100644
index 000000000000..4052e2259f30
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/scom_wsp.c
@@ -0,0 +1,77 @@
+/*
+ * SCOM backend for WSP
+ *
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg_a2.h>
+#include <asm/scom.h>
+#include <asm/udbg.h>
+
+#include "wsp.h"
+
+
+static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
+{
+ struct resource r;
+ u64 xscom_addr;
+
+ if (!of_get_property(dev, "scom-controller", NULL)) {
+ pr_err("%s: device %s is not a SCOM controller\n",
+ __func__, dev->full_name);
+ return SCOM_MAP_INVALID;
+ }
+
+ if (of_address_to_resource(dev, 0, &r)) {
+ pr_debug("Failed to find SCOM controller address\n");
+ return 0;
+ }
+
+ /* Transform the SCOM address into an XSCOM offset */
+ xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
+
+ return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
+}
+
+static void wsp_scom_unmap(scom_map_t map)
+{
+ iounmap((void *)map);
+}
+
+static u64 wsp_scom_read(scom_map_t map, u32 reg)
+{
+ u64 __iomem *addr = (u64 __iomem *)map;
+
+ return in_be64(addr + reg);
+}
+
+static void wsp_scom_write(scom_map_t map, u32 reg, u64 value)
+{
+ u64 __iomem *addr = (u64 __iomem *)map;
+
+ return out_be64(addr + reg, value);
+}
+
+static const struct scom_controller wsp_scom_controller = {
+ .map = wsp_scom_map,
+ .unmap = wsp_scom_unmap,
+ .read = wsp_scom_read,
+ .write = wsp_scom_write
+};
+
+void scom_init_wsp(void)
+{
+ scom_init(&wsp_scom_controller);
+}
diff --git a/arch/powerpc/platforms/wsp/setup.c b/arch/powerpc/platforms/wsp/setup.c
new file mode 100644
index 000000000000..11ac2f05e01c
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/setup.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2010 Michael Ellerman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include "wsp.h"
+
+/*
+ * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
+ * Won't work for nodes that are not a descendant of a wsp node.
+ */
+int wsp_get_chip_id(struct device_node *dn)
+{
+ const u32 *p;
+ int rc;
+
+ /* Start looking at the specified node, not its parent */
+ dn = of_node_get(dn);
+ while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
+ dn = of_get_next_parent(dn);
+
+ if (!dn)
+ return -1;
+
+ rc = *p;
+ of_node_put(dn);
+
+ return rc;
+}
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
new file mode 100644
index 000000000000..c7b8db9ed9b3
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/smp.c
@@ -0,0 +1,87 @@
+/*
+ * SMP Support for A2 platforms
+ *
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/dbell.h>
+#include <asm/machdep.h>
+#include <asm/xics.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+static void __devinit smp_a2_setup_cpu(int cpu)
+{
+ doorbell_setup_this_cpu();
+
+ if (cpu != boot_cpuid)
+ xics_setup_cpu();
+}
+
+int __devinit smp_a2_kick_cpu(int nr)
+{
+ const char *enable_method;
+ struct device_node *np;
+ int thr_idx;
+
+ if (nr < 0 || nr >= NR_CPUS)
+ return -ENOENT;
+
+ np = of_get_cpu_node(nr, &thr_idx);
+ if (!np)
+ return -ENODEV;
+
+ enable_method = of_get_property(np, "enable-method", NULL);
+ pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
+
+ if (!enable_method) {
+ printk(KERN_ERR "CPU%d has no enable-method\n", nr);
+ return -ENOENT;
+ } else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
+ if (a2_scom_startup_cpu(nr, thr_idx, np))
+ return -1;
+ } else {
+ printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
+ nr, enable_method);
+ return -EINVAL;
+ }
+
+ /*
+ * The processor is currently spinning, waiting for the
+ * cpu_start field to become non-zero After we set cpu_start,
+ * the processor will continue on to secondary_start
+ */
+ paca[nr].cpu_start = 1;
+
+ return 0;
+}
+
+static int __init smp_a2_probe(void)
+{
+ return cpus_weight(cpu_possible_map);
+}
+
+static struct smp_ops_t a2_smp_ops = {
+ .message_pass = doorbell_message_pass,
+ .probe = smp_a2_probe,
+ .kick_cpu = smp_a2_kick_cpu,
+ .setup_cpu = smp_a2_setup_cpu,
+};
+
+void __init a2_setup_smp(void)
+{
+ smp_ops = &a2_smp_ops;
+}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
new file mode 100644
index 000000000000..7c3e087fd2f2
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -0,0 +1,17 @@
+#ifndef __WSP_H
+#define __WSP_H
+
+#include <asm/wsp.h>
+
+extern void wsp_setup_pci(void);
+extern void scom_init_wsp(void);
+
+extern void a2_setup_smp(void);
+extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
+ struct device_node *np);
+int smp_a2_cpu_bootable(unsigned int nr);
+int __devinit smp_a2_kick_cpu(int nr);
+
+void opb_pic_init(void);
+
+#endif /* __WSP_H */
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index d9e0515592c4..3508321c4501 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -7,6 +7,7 @@
* 2 of the License, or (at your option) any later version.
*
*/
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/irq.h>