diff options
| -rw-r--r-- | arch/arm/boot/dts/at91-sam9x60ek.dts | 16 | ||||
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d3_xplained.dts | 29 | ||||
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d4_xplained.dts | 19 |
3 files changed, 63 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index edca66c232c1..ebbc9b23aef1 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -92,6 +92,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; status = "okay"; /* Conflict with pwm0. */ red { @@ -537,6 +539,10 @@ AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */ AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */ }; + pinctrl_sdmmc0_cd: sdmmc0_cd { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; sdmmc1 { @@ -569,6 +575,14 @@ AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; }; + + leds { + pinctrl_gpio_leds: gpio_leds { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; }; /* pinctrl */ &pwm0 { @@ -580,7 +594,7 @@ &sdmmc0 { bus-width = <4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdmmc0_default>; + pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>; status = "okay"; cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; disable-wp; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 9c55a921263b..cc55d1684322 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -57,6 +57,8 @@ }; spi0: spi@f0004000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_cs>; cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -169,6 +171,8 @@ }; spi1: spi@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_cs>; cs-gpios = <&pioC 25 0>; status = "okay"; }; @@ -248,6 +252,26 @@ <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; + + pinctrl_gpio_leds: gpio_leds_default { + atmel,pins = + <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_spi0_cs: spi0_cs_default { + atmel,pins = + <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_spi1_cs: spi1_cs_default { + atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default { + atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; }; @@ -339,6 +363,8 @@ vcc_mmc0_reg: fixedregulator_mmc0 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>; gpio = <&pioE 2 GPIO_ACTIVE_LOW>; regulator-name = "mmc0-card-supply"; regulator-min-microvolt = <3300000>; @@ -362,6 +388,9 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + status = "okay"; d2 { label = "d2"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 0b3ad1b580b8..e42dae06b582 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -90,6 +90,8 @@ }; spi1: spi@fc018000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_cs>; cs-gpios = <&pioB 21 0>; status = "okay"; }; @@ -147,6 +149,19 @@ atmel,pins = <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_spi0_cs: spi0_cs_default { + atmel,pins = + <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_gpio_leds: gpio_leds_default { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_vcc_mmc1_reg: vcc_mmc1_reg { + atmel,pins = + <AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; }; @@ -252,6 +267,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; status = "okay"; d8 { @@ -278,6 +295,8 @@ vcc_mmc1_reg: fixedregulator_mmc1 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc1_reg>; gpio = <&pioE 4 GPIO_ACTIVE_LOW>; regulator-name = "VDD MCI1"; regulator-min-microvolt = <3300000>; |