summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt')
-rw-r--r--Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt82
1 files changed, 82 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
new file mode 100644
index 000000000000..64b286d2d398
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
@@ -0,0 +1,82 @@
+TI AM654 SERDES
+
+Required properties:
+ - compatible: Should be "ti,phy-am654-serdes"
+ - reg : Address and length of the register set for the device.
+ - #phy-cells: determine the number of cells that should be given in the
+ phandle while referencing this phy. Should be "2". The 1st cell
+ corresponds to the phy type (should be one of the types specified in
+ include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
+ lane function.
+ If SERDES0 is referenced 2nd cell should be:
+ 0 - USB3
+ 1 - PCIe0 Lane0
+ 2 - ICSS2 SGMII Lane0
+ If SERDES1 is referenced 2nd cell should be:
+ 0 - PCIe1 Lane0
+ 1 - PCIe0 Lane1
+ 2 - ICSS2 SGMII Lane1
+ - power-domains: As documented by the generic PM domain bindings in
+ Documentation/devicetree/bindings/power/power_domain.txt.
+ - clocks: List of clock-specifiers representing the input to the SERDES.
+ Should have 3 items representing the left input clock, external
+ reference clock and right input clock in that order.
+ - clock-output-names: List of clock names for each of the clock outputs of
+ SERDES. Should have 3 items for CMU reference clock,
+ left output clock and right output clock in that order.
+ - assigned-clocks: As defined in
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ - assigned-clock-parents: As defined in
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ - #clock-cells: Should be <1> to choose between the 3 output clocks.
+ Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
+ for selecting the correct reference clock. This can be used while
+ specifying the clocks created by SERDES.
+ => AM654_SERDES_CMU_REFCLK
+ => AM654_SERDES_LO_REFCLK
+ => AM654_SERDES_RO_REFCLK
+
+ - mux-controls: Phandle to the multiplexer that is used to select the lane
+ function. See #phy-cells above to see the multiplex values.
+
+Example:
+
+Example for SERDES0 is given below. It has 3 clock inputs;
+left input reference clock as indicated by <&k3_clks 153 4>, external
+reference clock as indicated by <&k3_clks 153 1> and right input
+reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
+right input of SERDES0 is connected to the left output of SERDES1).
+
+SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
+first refers to the CMU reference clock, second refers to the left output
+reference clock and the third refers to the right output reference clock.
+
+The assigned-clocks and assigned-clock-parents is used here to set the
+parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
+CMU reference clock to left input reference clock.
+
+serdes0: serdes@900000 {
+ compatible = "ti,phy-am654-serdes";
+ reg = <0x0 0x900000 0x0 0x2000>;
+ reg-names = "serdes";
+ #phy-cells = <2>;
+ power-domains = <&k3_pds 153>;
+ clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
+ <&serdes1 AM654_SERDES_LO_REFCLK>;
+ clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk",
+ "serdes0_ro_refclk";
+ assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+ assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+ ti,serdes-clk = <&serdes0_clk>;
+ mux-controls = <&serdes_mux 0>;
+ #clock-cells = <1>;
+};
+
+Example for PCIe consumer node using the SERDES PHY specifier is given below.
+&pcie0_rc {
+ num-lanes = <2>;
+ phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
+ phy-names = "pcie-phy0", "pcie-phy1";
+};