diff options
Diffstat (limited to 'Documentation/devicetree')
9 files changed, 18 insertions, 80 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index ae4f68d4e696..bd67cfee6d19 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -105,7 +105,7 @@ properties: G coefficient for temperature equation. Default for series 5 = 60000 Default for series 6 = 57400 - multipleOf: 1000 + multipleOf: 100 minimum: 1000 $ref: /schemas/types.yaml#/definitions/uint32 @@ -114,7 +114,7 @@ properties: H coefficient for temperature equation. Default for series 5 = 200000 Default for series 6 = 249400 - multipleOf: 1000 + multipleOf: 100 minimum: 1000 $ref: /schemas/types.yaml#/definitions/uint32 @@ -131,7 +131,7 @@ properties: J coefficient for temperature equation. Default for series 5 = -100 Default for series 6 = 0 - multipleOf: 1000 + multipleOf: 100 maximum: 0 $ref: /schemas/types.yaml#/definitions/int32 diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index acb2b2ac4fe1..31cc0c412805 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -293,7 +293,7 @@ allOf: patternProperties: "^mac@[0-1]$": type: object - additionalProperties: false + unevaluatedProperties: false allOf: - $ref: ethernet-controller.yaml# description: @@ -305,14 +305,9 @@ patternProperties: reg: maxItems: 1 - phy-handle: true - - phy-mode: true - required: - reg - compatible - - phy-handle required: - compatible diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 176ea5f90251..7f324c6da915 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -91,12 +91,18 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle tx_delay: - description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. + description: Delay value for TXD timing. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x30 rx_delay: - description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. + description: Delay value for RXD timing. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x10 phy-supply: description: PHY regulator diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml index 30b2131b5860..65cb2e5c5eee 100644 --- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -16,7 +16,6 @@ properties: - enum: - atmel,at91rm9200-usart - atmel,at91sam9260-usart - - microchip,sam9x60-usart - items: - const: atmel,at91rm9200-dbgu - const: atmel,at91rm9200-usart @@ -24,6 +23,9 @@ properties: - const: atmel,at91sam9260-dbgu - const: atmel,at91sam9260-usart - items: + - const: microchip,sam9x60-usart + - const: atmel,at91sam9260-usart + - items: - const: microchip,sam9x60-dbgu - const: microchip,sam9x60-usart - const: atmel,at91sam9260-dbgu diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt deleted file mode 100644 index 87a6c375cd44..000000000000 --- a/Documentation/devicetree/bindings/serial/cavium-uart.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Universal Asynchronous Receiver/Transmitter (UART) - -- compatible: "cavium,octeon-3860-uart" - - Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. - -- reg: The base address of the UART register bank. - -- interrupts: A single interrupt specifier. - -- current-speed: Optional, the current bit rate in bits per second. - -Example: - uart1: serial@1180000000c00 { - compatible = "cavium,octeon-3860-uart","ns16550"; - reg = <0x11800 0x00000c00 0x0 0x400>; - current-speed = <115200>; - interrupts = <0 35>; - }; diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt deleted file mode 100644 index 04e23e63ee4f..000000000000 --- a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt +++ /dev/null @@ -1,28 +0,0 @@ -* NXP LPC1850 UART - -Required properties: -- compatible : "nxp,lpc1850-uart", "ns16550a". -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clocks : phandle to the input clocks. -- clock-names : required elements: "uartclk", "reg". - -Optional properties: -- dmas : Two or more DMA channel specifiers following the - convention outlined in bindings/dma/dma.txt -- dma-names : Names for the dma channels, if present. There must - be at least one channel named "tx" for transmit - and named "rx" for receive. - -Since it's also possible to also use the of_serial.c driver all -parameters from 8250.txt also apply but are optional. - -Example: -uart0: serial@40081000 { - compatible = "nxp,lpc1850-uart", "ns16550a"; - reg = <0x40081000 0x1000>; - reg-shift = <2>; - interrupts = <24>; - clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; - clock-names = "uartclk", "reg"; -}; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index 3de7b36829da..d3ce4de449d5 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -39,22 +39,4 @@ required: additionalProperties: false -examples: - - | - sound { - compatible = "audio-graph-card2"; - - links = <&cpu_port>; - }; - - cpu { - compatible = "cpu-driver"; - - cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; }; - }; - - codec { - compatible = "codec-driver"; - - port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; }; - }; +... diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 666a95ac22c8..ba5b7728cf33 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Google SC7180-Trogdor ASoC sound card driver maintainers: - - Rohit kumar <rohitkr@codeaurora.org> + - Rohit kumar <quic_rohkumar@quicinc.com> - Cheng-Yi Chiang <cychiang@chromium.org> description: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index 6cc8f86c7531..3a559bd07a79 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -8,7 +8,7 @@ title: Qualcomm Technologies Inc. LPASS CPU dai driver maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - - Rohit kumar <rohitkr@codeaurora.org> + - Rohit kumar <quic_rohkumar@quicinc.com> description: | Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist |