summaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.HiSax
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.HiSax')
-rw-r--r--Documentation/isdn/README.HiSax659
1 files changed, 0 insertions, 659 deletions
diff --git a/Documentation/isdn/README.HiSax b/Documentation/isdn/README.HiSax
deleted file mode 100644
index b1a573cf4472..000000000000
--- a/Documentation/isdn/README.HiSax
+++ /dev/null
@@ -1,659 +0,0 @@
-HiSax is a Linux hardware-level driver for passive ISDN cards with Siemens
-chipset (ISAC_S 2085/2086/2186, HSCX SAB 82525). It is based on the Teles
-driver from Jan den Ouden.
-It is meant to be used with isdn4linux, an ISDN link-level module for Linux
-written by Fritz Elfert.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-
-Supported cards
----------------
-
-Teles 8.0/16.0/16.3 and compatible ones
-Teles 16.3c
-Teles S0/PCMCIA
-Teles PCI
-Teles S0Box
-Creatix S0Box
-Creatix PnP S0
-Compaq ISDN S0 ISA card
-AVM A1 (Fritz, Teledat 150)
-AVM Fritz PCMCIA
-AVM Fritz PnP
-AVM Fritz PCI
-ELSA Microlink PCC-16, PCF, PCF-Pro, PCC-8
-ELSA Quickstep 1000
-ELSA Quickstep 1000PCI
-ELSA Quickstep 3000 (same settings as QS1000)
-ELSA Quickstep 3000PCI
-ELSA PCMCIA
-ITK ix1-micro Rev.2
-Eicon Diva 2.0 ISA and PCI (S0 and U interface, no PRO version)
-Eicon Diva 2.01 ISA and PCI
-Eicon Diva 2.02 PCI
-Eicon Diva Piccola
-ASUSCOM NETWORK INC. ISDNLink 128K PC adapter (order code I-IN100-ST-D)
-Dynalink IS64PH (OEM version of ASUSCOM NETWORK INC. ISDNLink 128K adapter)
-PCBIT-DP (OEM version of ASUSCOM NETWORK INC. ISDNLink)
-HFC-2BS0 based cards (TeleInt SA1)
-Sedlbauer Speed Card (Speed Win, Teledat 100, PCI, Fax+)
-Sedlbauer Speed Star/Speed Star2 (PCMCIA)
-Sedlbauer ISDN-Controller PC/104
-USR Sportster internal TA (compatible Stollmann tina-pp V3)
-USR internal TA PCI
-ith Kommunikationstechnik GmbH MIC 16 ISA card
-Traverse Technologie NETjet PCI S0 card and NETspider U card
-Ovislink ISDN sc100-p card (NETjet driver)
-Dr. Neuhaus Niccy PnP/PCI
-Siemens I-Surf 1.0
-Siemens I-Surf 2.0 (with IPAC, try type 12 asuscom)
-ACER P10
-HST Saphir
-Berkom Telekom A4T
-Scitel Quadro
-Gazel ISDN cards
-HFC-PCI based cards
-Winbond W6692 based cards
-HFC-S+, HFC-SP/PCMCIA cards
-formula-n enternow
-Gerdes Power ISDN
-
-Note: PCF, PCF-Pro: up to now, only the ISDN part is supported
- PCC-8: not tested yet
- Eicon.Diehl Diva U interface not tested
-
-If you know other passive cards with the Siemens chipset, please let me know.
-You can combine any card, if there is no conflict between the resources
-(io, mem, irq).
-
-
-Configuring the driver
-----------------------
-
-The HiSax driver can either be built directly into the kernel or as a module.
-It can be configured using the command line feature while loading the kernel
-with LILO or LOADLIN or, if built as a module, using insmod/modprobe with
-parameters.
-There is also some config needed before you compile the kernel and/or
-modules. It is included in the normal "make [menu]config" target at the
-kernel. Don't forget it, especially to select the right D-channel protocol.
-
-Please note: In older versions of the HiSax driver, all PnP cards
-needed to be configured with isapnp and worked only with the HiSax
-driver used as a module.
-
-In the current version, HiSax will automatically use the in-kernel
-ISAPnP support, provided you selected it during kernel configuration
-(CONFIG_ISAPNP), if you don't give the io=, irq= command line parameters.
-
-The affected card types are: 4,7,12,14,19,27-30
-
-a) when built as a module
--------------------------
-
-insmod/modprobe hisax.o \
- io=iobase irq=IRQ mem=membase type=card_type \
- protocol=D_channel_protocol id=idstring
-
-or, if several cards are installed:
-
-insmod/modprobe hisax.o \
- io=iobase1,iobase2,... irq=IRQ1,IRQ2,... mem=membase1,membase2,... \
- type=card_type1,card_type2,... \
- protocol=D_channel_protocol1,D_channel_protocol2,... \
- id=idstring1%idstring2 ...
-
-where "iobaseN" represents the I/O base address of the Nth card, "membaseN"
-the memory base address of the Nth card, etc.
-
-The reason for the delimiter "%" being used in the idstrings is that ","
-won't work with the current modules package.
-
-The parameters may be specified in any order. For example, the "io"
-parameter may precede the "irq" parameter, or vice versa. If several
-cards are installed, the ordering within the comma separated parameter
-lists must of course be consistent.
-
-Only parameters applicable to the card type need to be specified. For
-example, the Teles 16.3 card is not memory-mapped, so the "mem"
-parameter may be omitted for this card. Sometimes it may be necessary
-to specify a dummy parameter, however. This is the case when there is
-a card of a different type later in the list that needs a parameter
-which the preceding card does not. For instance, if a Teles 16.0 card
-is listed after a Teles 16.3 card, a dummy memory base parameter of 0
-must be specified for the 16.3. Instead of a dummy value, the parameter
-can also be skipped by simply omitting the value. For example:
-mem=,0xd0000. See example 6 below.
-
-The parameter for the D-Channel protocol may be omitted if you selected the
-correct one during kernel config. Valid values are "1" for German 1TR6,
-"2" for EDSS1 (Euro ISDN), "3" for leased lines (no D-Channel) and "4"
-for US NI1.
-With US NI1 you have to include your SPID into the MSN setting in the form
-<MSN>:<SPID> for example (your phonenumber is 1234 your SPID 5678):
-AT&E1234:5678 on ttyI interfaces
-isdnctrl eaz ippp0 1234:5678 on network devices
-
-The Creatix/Teles PnP cards use io1= and io2= instead of io= for specifying
-the I/O addresses of the ISAC and HSCX chips, respectively.
-
-Card types:
-
- Type Required parameters (in addition to type and protocol)
-
- 1 Teles 16.0 irq, mem, io
- 2 Teles 8.0 irq, mem
- 3 Teles 16.3 (non PnP) irq, io
- 4 Creatix/Teles PnP irq, io0 (ISAC), io1 (HSCX)
- 5 AVM A1 (Fritz) irq, io
- 6 ELSA PCC/PCF cards io or nothing for autodetect (the iobase is
- required only if you have more than one ELSA
- card in your PC)
- 7 ELSA Quickstep 1000 irq, io (from isapnp setup)
- 8 Teles 16.3 PCMCIA irq, io
- 9 ITK ix1-micro Rev.2 irq, io
- 10 ELSA PCMCIA irq, io (set with card manager)
- 11 Eicon.Diehl Diva ISA PnP irq, io
- 11 Eicon.Diehl Diva PCI no parameter
- 12 ASUS COM ISDNLink irq, io (from isapnp setup)
- 13 HFC-2BS0 based cards irq, io
- 14 Teles 16.3c PnP irq, io
- 15 Sedlbauer Speed Card irq, io
- 15 Sedlbauer PC/104 irq, io
- 15 Sedlbauer Speed PCI no parameter
- 16 USR Sportster internal irq, io
- 17 MIC card irq, io
- 18 ELSA Quickstep 1000PCI no parameter
- 19 Compaq ISDN S0 ISA card irq, io0, io1, io (from isapnp setup io=IO2)
- 20 NETjet PCI card no parameter
- 21 Teles PCI no parameter
- 22 Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager)
- 24 Dr. Neuhaus Niccy PnP irq, io0, io1 (from isapnp setup)
- 24 Dr. Neuhaus Niccy PCI no parameter
- 25 Teles S0Box irq, io (of the used lpt port)
- 26 AVM A1 PCMCIA (Fritz!) irq, io (set with card manager)
- 27 AVM PnP (Fritz!PnP) irq, io (from isapnp setup)
- 27 AVM PCI (Fritz!PCI) no parameter
- 28 Sedlbauer Speed Fax+ irq, io (from isapnp setup)
- 29 Siemens I-Surf 1.0 irq, io, memory (from isapnp setup)
- 30 ACER P10 irq, io (from isapnp setup)
- 31 HST Saphir irq, io
- 32 Telekom A4T none
- 33 Scitel Quadro subcontroller (4*S0, subctrl 1...4)
- 34 Gazel ISDN cards (ISA) irq,io
- 34 Gazel ISDN cards (PCI) none
- 35 HFC 2BDS0 PCI none
- 36 W6692 based PCI cards none
- 37 HFC 2BDS0 S+, SP irq,io
- 38 NETspider U PCI card none
- 39 HFC 2BDS0 SP/PCMCIA irq,io (set with cardmgr)
- 40 hotplug interface
- 41 Formula-n enter:now PCI none
-
-At the moment IRQ sharing is only possible with PCI cards. Please make sure
-that your IRQ is free and enabled for ISA use.
-
-
-Examples for module loading
-
-1. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 10
- modprobe hisax type=3 protocol=2 io=0x280 irq=10
-
-2. Teles 16.0, 1TR6 ISDN, I/O base d80 hex, IRQ 5, Memory d0000 hex
- modprobe hisax protocol=1 type=1 io=0xd80 mem=0xd0000 irq=5
-
-3. Fritzcard, Euro ISDN, I/O base 340 hex, IRQ 10 and ELSA PCF, Euro ISDN
- modprobe hisax type=5,6 protocol=2,2 io=0x340 irq=10 id=Fritz%Elsa
-
-4. Any ELSA PCC/PCF card, Euro ISDN
- modprobe hisax type=6 protocol=2
-
-5. Teles 16.3 PnP, Euro ISDN, with isapnp configured
- isapnp config: (INT 0 (IRQ 10 (MODE +E)))
- (IO 0 (BASE 0x0580))
- (IO 1 (BASE 0x0180))
- modprobe hisax type=4 protocol=2 irq=10 io0=0x580 io1=0x180
-
- In the current version of HiSax, you can instead simply use
-
- modprobe hisax type=4 protocol=2
-
- if you configured your kernel for ISAPnP. Don't run isapnp in
- this case!
-
-6. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 12 and
- Teles 16.0, 1TR6, IRQ 5, Memory d0000 hex
- modprobe hisax type=3,1 protocol=2,1 io=0x280 mem=0,0xd0000
-
- Please note the dummy 0 memory address for the Teles 16.3, used as a
- placeholder as described above, in the last example.
-
-7. Teles PCMCIA, Euro ISDN, I/O base 180 hex, IRQ 15 (default values)
- modprobe hisax type=8 protocol=2 io=0x180 irq=15
-
-
-b) using LILO/LOADLIN, with the driver compiled directly into the kernel
-------------------------------------------------------------------------
-
-hisax=typ1,dp1,pa_1,pb_1,pc_1[,typ2,dp2,pa_2 ... \
- typn,dpn,pa_n,pb_n,pc_n][,idstring1[,idstring2,...,idstringn]]
-
-where
- typ1 = type of 1st card (default depends on kernel settings)
- dp1 = D-Channel protocol of 1st card. 1=1TR6, 2=EDSS1, 3=leased
- pa_1 = 1st parameter (depending on the type of the card)
- pb_1 = 2nd parameter ( " " " " " " " )
- pc_1 = 3rd parameter ( " " " " " " " )
-
- typ2,dp2,pa_2,pb_2,pc_2 = Parameters of the second card (defaults: none)
- typn,dpn,pa_n,pb_n,pc_n = Parameters of the n'th card (up to 16 cards are
- supported)
-
- idstring = Driver ID for accessing the particular card with utility
- programs and for identification when using a line monitor
- (default: "HiSax")
-
- Note: the ID string must start with an alphabetical character!
-
-Card types:
-
-type
- 1 Teles 16.0 pa=irq pb=membase pc=iobase
- 2 Teles 8.0 pa=irq pb=membase
- 3 Teles 16.3 pa=irq pb=iobase
- 4 Creatix/Teles PNP ONLY WORKS AS A MODULE !
- 5 AVM A1 (Fritz) pa=irq pb=iobase
- 6 ELSA PCC/PCF cards pa=iobase or nothing for autodetect
- 7 ELSA Quickstep 1000 ONLY WORKS AS A MODULE !
- 8 Teles S0 PCMCIA pa=irq pb=iobase
- 9 ITK ix1-micro Rev.2 pa=irq pb=iobase
- 10 ELSA PCMCIA pa=irq, pb=io (set with card manager)
- 11 Eicon.Diehl Diva ISAPnP ONLY WORKS AS A MODULE !
- 11 Eicon.Diehl Diva PCI no parameter
- 12 ASUS COM ISDNLink ONLY WORKS AS A MODULE !
- 13 HFC-2BS0 based cards pa=irq pb=io
- 14 Teles 16.3c PnP ONLY WORKS AS A MODULE !
- 15 Sedlbauer Speed Card pa=irq pb=io (Speed Win only as module !)
- 15 Sedlbauer PC/104 pa=irq pb=io
- 15 Sedlbauer Speed PCI no parameter
- 16 USR Sportster internal pa=irq pb=io
- 17 MIC card pa=irq pb=io
- 18 ELSA Quickstep 1000PCI no parameter
- 19 Compaq ISDN S0 ISA card ONLY WORKS AS A MODULE !
- 20 NETjet PCI card no parameter
- 21 Teles PCI no parameter
- 22 Sedlbauer Speed Star (PCMCIA) pa=irq, pb=io (set with card manager)
- 24 Dr. Neuhaus Niccy PnP ONLY WORKS AS A MODULE !
- 24 Dr. Neuhaus Niccy PCI no parameter
- 25 Teles S0Box pa=irq, pb=io (of the used lpt port)
- 26 AVM A1 PCMCIA (Fritz!) pa=irq, pb=io (set with card manager)
- 27 AVM PnP (Fritz!PnP) ONLY WORKS AS A MODULE !
- 27 AVM PCI (Fritz!PCI) no parameter
- 28 Sedlbauer Speed Fax+ ONLY WORKS AS A MODULE !
- 29 Siemens I-Surf 1.0 ONLY WORKS AS A MODULE !
- 30 ACER P10 ONLY WORKS AS A MODULE !
- 31 HST Saphir pa=irq, pb=io
- 32 Telekom A4T no parameter
- 33 Scitel Quadro subcontroller (4*S0, subctrl 1...4)
- 34 Gazel ISDN cards (ISA) pa=irq, pb=io
- 34 Gazel ISDN cards (PCI) no parameter
- 35 HFC 2BDS0 PCI no parameter
- 36 W6692 based PCI cards none
- 37 HFC 2BDS0 S+,SP/PCMCIA ONLY WORKS AS A MODULE !
- 38 NETspider U PCI card none
- 39 HFC 2BDS0 SP/PCMCIA ONLY WORKS AS A MODULE !
- 40 hotplug interface ONLY WORKS AS A MODULE !
- 41 Formula-n enter:now PCI none
-
-Running the driver
-------------------
-
-When you insmod isdn.o and hisax.o (or with the in-kernel version, during
-boot time), a few lines should appear in your syslog. Look for something like:
-
-Apr 13 21:01:59 kke01 kernel: HiSax: Driver for Siemens chip set ISDN cards
-Apr 13 21:01:59 kke01 kernel: HiSax: Version 2.9
-Apr 13 21:01:59 kke01 kernel: HiSax: Revisions 1.14/1.9/1.10/1.25/1.8
-Apr 13 21:01:59 kke01 kernel: HiSax: Total 1 card defined
-Apr 13 21:01:59 kke01 kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax1 (0)
-Apr 13 21:01:59 kke01 kernel: HiSax: Elsa driver Rev. 1.13
-...
-Apr 13 21:01:59 kke01 kernel: Elsa: PCF-Pro found at 0x360 Rev.:C IRQ 10
-Apr 13 21:01:59 kke01 kernel: Elsa: timer OK; resetting card
-Apr 13 21:01:59 kke01 kernel: Elsa: HSCX version A: V2.1 B: V2.1
-Apr 13 21:01:59 kke01 kernel: Elsa: ISAC 2086/2186 V1.1
-...
-Apr 13 21:01:59 kke01 kernel: HiSax: DSS1 Rev. 1.14
-Apr 13 21:01:59 kke01 kernel: HiSax: 2 channels added
-
-This means that the card is ready for use.
-Cabling problems or line-downs are not detected, and only some ELSA cards can
-detect the S0 power.
-
-Remember that, according to the new strategy for accessing low-level drivers
-from within isdn4linux, you should also define a driver ID while doing
-insmod: Simply append hisax_id=<SomeString> to the insmod command line. This
-string MUST NOT start with a digit or a small 'x'!
-
-At this point you can run a 'cat /dev/isdnctrl0' and view debugging messages.
-
-At the moment, debugging messages are enabled with the hisaxctrl tool:
-
- hisaxctrl <DriverId> DebugCmd <debugging_flags>
-
-<DriverId> default is HiSax, if you didn't specify one.
-
-DebugCmd is 1 for generic debugging
- 11 for layer 1 development debugging
- 13 for layer 3 development debugging
-
-where <debugging_flags> is the integer sum of the following debugging
-options you wish enabled:
-
-With DebugCmd set to 1:
-
- 0x0001 Link-level <--> hardware-level communication
- 0x0002 Top state machine
- 0x0004 D-Channel Frames for isdnlog
- 0x0008 D-Channel Q.921
- 0x0010 B-Channel X.75
- 0x0020 D-Channel l2
- 0x0040 B-Channel l2
- 0x0080 D-Channel link state debugging
- 0x0100 B-Channel link state debugging
- 0x0200 TEI debug
- 0x0400 LOCK debug in callc.c
- 0x0800 More paranoid debug in callc.c (not for normal use)
- 0x1000 D-Channel l1 state debugging
- 0x2000 B-Channel l1 state debugging
-
-With DebugCmd set to 11:
-
- 0x0001 Warnings (default: on)
- 0x0002 IRQ status
- 0x0004 ISAC
- 0x0008 ISAC FIFO
- 0x0010 HSCX
- 0x0020 HSCX FIFO (attention: full B-Channel output!)
- 0x0040 D-Channel LAPD frame types
- 0x0080 IPAC debug
- 0x0100 HFC receive debug
- 0x0200 ISAC monitor debug
- 0x0400 D-Channel frames for isdnlog (set with 1 0x4 too)
- 0x0800 D-Channel message verbose
-
-With DebugCmd set to 13:
-
- 1 Warnings (default: on)
- 2 l3 protocol descriptor errors
- 4 l3 state machine
- 8 charge info debugging (1TR6)
-
-For example, 'hisaxctrl HiSax 1 0x3ff' enables full generic debugging.
-
-Because of some obscure problems with some switch equipment, the delay
-between the CONNECT message and sending the first data on the B-channel is now
-configurable with
-
-hisaxctrl <DriverId> 2 <delay>
-<delay> in ms Value between 50 and 800 ms is recommended.
-
-Downloading Firmware
---------------------
-At the moment, the Sedlbauer speed fax+ is the only card, which
-needs to download firmware.
-The firmware is downloaded with the hisaxctrl tool:
-
- hisaxctrl <DriverId> 9 <firmware_filename>
-
-<DriverId> default is HiSax, if you didn't specify one,
-
-where <firmware_filename> is the filename of the firmware file.
-
-For example, 'hisaxctrl HiSax 9 ISAR.BIN' downloads the firmware for
-ISAR based cards (like the Sedlbauer speed fax+).
-
-Warning
--------
-HiSax is a work in progress and may crash your machine.
-For certification look at HiSax.cert file.
-
-Limitations
------------
-At this time, HiSax only works on Euro ISDN lines and German 1TR6 lines.
-For leased lines see appendix.
-
-Bugs
-----
-If you find any, please let me know.
-
-
-Thanks
-------
-Special thanks to:
-
- Emil Stephan for the name HiSax which is a mix of HSCX and ISAC.
-
- Fritz Elfert, Jan den Ouden, Michael Hipp, Michael Wein,
- Andreas Kool, Pekka Sarnila, Sim Yskes, Johan Myrre'en,
- Klaus-Peter Nischke (ITK AG), Christof Petig, Werner Fehn (ELSA GmbH),
- Volker Schmidt
- Edgar Toernig and Marcus Niemann for the Sedlbauer driver
- Stephan von Krawczynski
- Juergen Quade for the Leased Line part
- Klaus Lichtenwalder (Klaus.Lichtenwalder@WebForum.DE), for ELSA PCMCIA support
- Enrik Berkhan (enrik@starfleet.inka.de) for S0BOX specific stuff
- Ton van Rosmalen for Teles PCI
- Petr Novak <petr.novak@i.cz> for Winbond W6692 support
- Werner Cornelius <werner@isdn4linux.de> for HFC-PCI, HFC-S(+/P) and supplementary services support
- and more people who are hunting bugs. (If I forgot somebody, please
- send me a mail).
-
- Firma ELSA GmbH
- Firma Eicon.Diehl GmbH
- Firma Dynalink NL
- Firma ASUSCOM NETWORK INC. Taiwan
- Firma S.u.S.E
- Firma ith Kommunikationstechnik GmbH
- Firma Traverse Technologie Australia
- Firma Medusa GmbH (www.medusa.de).
- Firma Quant-X Austria for sponsoring a DEC Alpha board+CPU
- Firma Cologne Chip Designs GmbH
-
- My girl friend and partner in life Ute for her patience with me.
-
-
-Enjoy,
-
-Karsten Keil
-keil@isdn4linux.de
-
-
-Appendix: Teles PCMCIA driver
------------------------------
-
-See
- http://www.linux.no/teles_cs.txt
-for instructions.
-
-Appendix: Linux and ISDN-leased lines
--------------------------------------
-
-Original from Juergen Quade, new version KKe.
-
-Attention NEW VERSION, the old leased line syntax won't work !!!
-
-You can use HiSax to connect your Linux-Box via an ISDN leased line
-to e.g. the Internet:
-
-1. Build a kernel which includes the HiSax driver either as a module
- or as part of the kernel.
- cd /usr/src/linux
- make menuconfig
- <ISDN subsystem - ISDN support -- HiSax>
- make clean; make zImage; make modules; make modules_install
-2. Install the new kernel
- cp /usr/src/linux/arch/x86/boot/zImage /etc/kernel/linux.isdn
- vi /etc/lilo.conf
- <add new kernel in the bootable image section>
- lilo
-3. in case the hisax driver is a "fixed" part of the kernel, configure
- the driver with lilo:
- vi /etc/lilo.conf
- <add HiSax driver parameter in the global section (see below)>
- lilo
- Your lilo.conf _might_ look like the following:
-
- # LILO configuration-file
- # global section
- # teles 16.0 on IRQ=5, MEM=0xd8000, PORT=0xd80
- append="hisax=1,3,5,0xd8000,0xd80,HiSax"
- # teles 16.3 (non pnp) on IRQ=15, PORT=0xd80
- # append="hisax=3,3,5,0xd8000,0xd80,HiSax"
- boot=/dev/sda
- compact # faster, but won't work on all systems.
- linear
- read-only
- prompt
- timeout=100
- vga = normal # force sane state
- # Linux bootable partition config begins
- image = /etc/kernel/linux.isdn
- root = /dev/sda1
- label = linux.isdn
- #
- image = /etc/kernel/linux-2.0.30
- root = /dev/sda1
- label = linux.secure
-
- In the line starting with "append" you have to adapt the parameters
- according to your card (see above in this file)
-
-3. boot the new linux.isdn kernel
-4. start the ISDN subsystem:
- a) load - if necessary - the modules (depends, whether you compiled
- the ISDN driver as module or not)
- According to the type of card you have to specify the necessary
- driver parameter (irq, io, mem, type, protocol).
- For the leased line the protocol is "3". See the table above for
- the parameters, which you have to specify depending on your card.
- b) configure i4l
- /sbin/isdnctrl addif isdn0
- # EAZ 1 -- B1 channel 2 --B2 channel
- /sbin/isdnctrl eaz isdn0 1
- /sbin/isdnctrl secure isdn0 on
- /sbin/isdnctrl huptimeout isdn0 0
- /sbin/isdnctrl l2_prot isdn0 hdlc
- # Attention you must not set an outgoing number !!! This won't work !!!
- # The incoming number is LEASED0 for the first card, LEASED1 for the
- # second and so on.
- /sbin/isdnctrl addphone isdn0 in LEASED0
- # Here is no need to bind the channel.
- c) in case the remote partner is a CISCO:
- /sbin/isdnctrl encap isdn0 cisco-h
- d) configure the interface
- /sbin/ifconfig isdn0 ${LOCAL_IP} pointopoint ${REMOTE_IP}
- e) set the routes
- /sbin/route add -host ${REMOTE_IP} isdn0
- /sbin/route add default gw ${REMOTE_IP}
- f) switch the card into leased mode for each used B-channel
- /sbin/hisaxctrl HiSax 5 1
-
-Remarks:
-a) Use state of the art isdn4k-utils
-
-Here an example script:
-#!/bin/sh
-# Start/Stop ISDN leased line connection
-
-I4L_AS_MODULE=yes
-I4L_REMOTE_IS_CISCO=no
-I4L_MODULE_PARAMS="type=16 io=0x268 irq=7 "
-I4L_DEBUG=no
-I4L_LEASED_128K=yes
-LOCAL_IP=192.168.1.1
-REMOTE_IP=192.168.2.1
-
-case "$1" in
- start)
- echo "Starting ISDN ..."
- if [ ${I4L_AS_MODULE} = "yes" ]; then
- echo "loading modules..."
- /sbin/modprobe hisax ${I4L_MODULE_PARAMS}
- fi
- # configure interface
- /sbin/isdnctrl addif isdn0
- /sbin/isdnctrl secure isdn0 on
- if [ ${I4L_DEBUG} = "yes" ]; then
- /sbin/isdnctrl verbose 7
- /sbin/hisaxctrl HiSax 1 0xffff
- /sbin/hisaxctrl HiSax 11 0xff
- cat /dev/isdnctrl >/tmp/lea.log &
- fi
- if [ ${I4L_REMOTE_IS_CISCO} = "yes" ]; then
- /sbin/isdnctrl encap isdn0 cisco-h
- fi
- /sbin/isdnctrl huptimeout isdn0 0
- # B-CHANNEL 1
- /sbin/isdnctrl eaz isdn0 1
- /sbin/isdnctrl l2_prot isdn0 hdlc
- # 1. card
- /sbin/isdnctrl addphone isdn0 in LEASED0
- if [ ${I4L_LEASED_128K} = "yes" ]; then
- /sbin/isdnctrl addslave isdn0 isdn0s
- /sbin/isdnctrl secure isdn0s on
- /sbin/isdnctrl huptimeout isdn0s 0
- # B-CHANNEL 2
- /sbin/isdnctrl eaz isdn0s 2
- /sbin/isdnctrl l2_prot isdn0s hdlc
- # 1. card
- /sbin/isdnctrl addphone isdn0s in LEASED0
- if [ ${I4L_REMOTE_IS_CISCO} = "yes" ]; then
- /sbin/isdnctrl encap isdn0s cisco-h
- fi
- fi
- /sbin/isdnctrl dialmode isdn0 manual
- # configure tcp/ip
- /sbin/ifconfig isdn0 ${LOCAL_IP} pointopoint ${REMOTE_IP}
- /sbin/route add -host ${REMOTE_IP} isdn0
- /sbin/route add default gw ${REMOTE_IP}
- # switch to leased mode
- # B-CHANNEL 1
- /sbin/hisaxctrl HiSax 5 1
- if [ ${I4L_LEASED_128K} = "yes" ]; then
- # B-CHANNEL 2
- sleep 10; /* Wait for master */
- /sbin/hisaxctrl HiSax 5 2
- fi
- ;;
- stop)
- /sbin/ifconfig isdn0 down
- /sbin/isdnctrl delif isdn0
- if [ ${I4L_DEBUG} = "yes" ]; then
- killall cat
- fi
- if [ ${I4L_AS_MODULE} = "yes" ]; then
- /sbin/rmmod hisax
- /sbin/rmmod isdn
- /sbin/rmmod ppp
- /sbin/rmmod slhc
- fi
- ;;
- *)
- echo "Usage: $0 {start|stop}"
- exit 1
-esac
-exit 0