1 files changed, 0 insertions, 38 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
deleted file mode 100644
index 349f79fd7076..000000000000
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-On CPM1 devices, all ports are using slightly different register layouts.
-Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
-
-On CPM2 devices, all ports are 32bit ports and use a common register layout.
-
-Required properties:
-- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
-  "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
-  "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-- gpio-controller : Marks the port as GPIO controller.
-
-Example of three SOC GPIO banks defined as gpio-controller nodes:
-
-	CPM1_PIO_A: gpio-controller@950 {
-		#gpio-cells = <2>;
-		compatible = "fsl,cpm1-pario-bank-a";
-		reg = <0x950 0x10>;
-		gpio-controller;
-	};
-
-	CPM1_PIO_B: gpio-controller@ab8 {
-		#gpio-cells = <2>;
-		compatible = "fsl,cpm1-pario-bank-b";
-		reg = <0xab8 0x10>;
-		gpio-controller;
-	};
-
-	CPM1_PIO_E: gpio-controller@ac8 {
-		#gpio-cells = <2>;
-		compatible = "fsl,cpm1-pario-bank-e";
-		reg = <0xac8 0x18>;
-		gpio-controller;
-	};