diff options
Diffstat (limited to 'Documentation')
10 files changed, 216 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt index e56a1df3a9d3..dd906db34b32 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -16,7 +16,20 @@ Required properties: - #clock-cells: Should be <1>. The permitted clock-specifier values can be found in include/dt-bindings/clock/bcm2835.h - reg: Specifies base physical address and size of the registers -- clocks: The external oscillator clock phandle +- clocks: phandles to the parent clocks used as input to the module, in + the following order: + + - External oscillator + - DSI0 byte clock + - DSI0 DDR2 clock + - DSI0 DDR clock + - DSI1 byte clock + - DSI1 DDR2 clock + - DSI1 DDR clock + + Only external oscillator is required. The DSI clocks may + not be present, in which case their children will be + unusable. Example: diff --git a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt deleted file mode 100644 index 847d98bae8cf..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Samsung Exynos4415 Clock Controller - -The Exynos4415 clock controller generates and supplies clock to various -consumer devices within the Exynos4415 SoC. - -Required properties: - -- compatible: should be one of the following: - - "samsung,exynos4415-cmu" - for the main system clocks controller - (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains). - - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory - Controller (DMC) domain clock controller. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos4415.h header and can be used in device -tree sources. - -Example 1: An example of a clock controller node is listed below. - - cmu: clock-controller@10030000 { - compatible = "samsung,exynos4415-cmu"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - cmu-dmc: clock-controller@105C0000 { - compatible = "samsung,exynos4415-cmu-dmc"; - reg = <0x105C0000 0x3000>; - #clock-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt new file mode 100644 index 000000000000..cc9b86c35758 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -0,0 +1,42 @@ +* Hisilicon Hi3660 Clock Controller + +The Hi3660 clock controller generates and supplies clock to various +controllers within the Hi3660 SoC. + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi3660-crgctrl" + - "hisilicon,hi3660-pctrl" + - "hisilicon,hi3660-pmuctrl" + - "hisilicon,hi3660-sctrl" + - "hisilicon,hi3660-iomcu" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>. + +Examples: + crg_ctrl: clock-controller@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt new file mode 100644 index 000000000000..87e9c47a89a3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt @@ -0,0 +1,65 @@ +Binding for IDT VersaClock5 programmable i2c clock generator. + +The IDT VersaClock5 are programmable i2c clock generators providing +from 3 to 12 output clocks. + +==I2C device node== + +Required properties: +- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5933". +- reg: i2c device address, shall be 0x68 or 0x6a. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock handles, + - 5p49v5923: (required) either or both of XTAL or CLKIN + reference clock. + - 5p49v5933: (optional) property not present (internal + Xtal used) or CLKIN reference + clock. +- clock-names: from common clock binding; clock input names, can be + - 5p49v5923: (required) either or both of "xin", "clkin". + - 5p49v5933: (optional) property not present or "clkin". + +==Mapping between clock specifier and physical pins== + +When referencing the provided clock in the DT using phandle and +clock specifier, the following mapping applies: + +5P49V5923: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + +5P49V5933: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT4 + +==Example== + +/* 25MHz reference crystal */ +ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; +}; + +i2c-master-node { + + /* IDT 5P49V5923 i2c clock generator */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + + /* Connect XIN input to 25MHz reference */ + clocks = <&ref25m>; + clock-names = "xin"; + }; +}; + +/* Consumer referencing the 5P49V5923 pin OUT1 */ +consumer { + ... + clocks = <&vc5 1>; + ... +} diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 87d3714b956a..a7235e9e1c97 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -11,6 +11,7 @@ Required properties : compatible "qcom,rpmcc" should be also included. "qcom,rpmcc-msm8916", "qcom,rpmcc" + "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt new file mode 100644 index 000000000000..e71c675ba5da --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt @@ -0,0 +1,57 @@ +* Rockchip RK3328 Clock and Reset Unit + +The RK3328 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk3328-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "clkin_i2s" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + +Example: Clock controller node: + + cru: clock-controller@ff440000 { + compatible = "rockchip,rk3328-cru"; + reg = <0x0 0xff440000 0x0 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff120000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff120000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt index 3888dd33fcbd..3bc56fae90ac 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt @@ -13,6 +13,12 @@ Required Properties: - #clock-cells: should be 1. - #reset-cells: should be 1. +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files". + It is used for GRF muxes, if missing any muxes present in the GRF will not + be available. + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt index 0532d815dae3..8f19d87cbf24 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -17,6 +17,9 @@ Required properties: property, containing a phandle to the clock device node, an index selecting between gated clocks and other clocks and an index specifying the clock to use. +- clocks: External oscillator clock phandle + - high speed external clock signal (HSE) + - external I2S clock (I2S_CKIN) Example: @@ -25,6 +28,7 @@ Example: #clock-cells = <2> compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; }; Specifying gated clocks @@ -66,6 +70,19 @@ The secondary index is bound with the following magic numbers: 0 SYSTICK 1 FCLK + 2 CLK_LSI (low-power clock source) + 3 CLK_LSE (generated from a 32.768 kHz low-speed external + crystal or ceramic resonator) + 4 CLK_HSE_RTC (HSE division factor for RTC clock) + 5 CLK_RTC (real-time clock) + 6 PLL_VCO_I2S (vco frequency of I2S pll) + 7 PLL_VCO_SAI (vco frequency of SAI pll) + 8 CLK_LCD (LCD-TFT) + 9 CLK_I2S (I2S clocks) + 10 CLK_SAI1 (audio clocks) + 11 CLK_SAI2 + 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor) + 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor) Example: diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt index 4c7669ad681b..0d01f2d5cc36 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt @@ -1,15 +1,22 @@ -Binding for TO CDCE925 programmable I2C clock synthesizers. +Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers. Reference This binding uses the common clock binding[1]. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] http://www.ti.com/product/cdce925 +[2] http://www.ti.com/product/cdce913 +[3] http://www.ti.com/product/cdce925 +[4] http://www.ti.com/product/cdce937 +[5] http://www.ti.com/product/cdce949 The driver provides clock sources for each output Y1 through Y5. Required properties: - - compatible: Shall be "ti,cdce925" + - compatible: Shall be one of the following: + - "ti,cdce913": 1-PLL, 3 Outputs + - "ti,cdce925": 2-PLL, 5 Outputs + - "ti,cdce937": 3-PLL, 7 Outputs + - "ti,cdce949": 4-PLL, 9 Outputs - reg: I2C device address. - clocks: Points to a fixed parent clock that provides the input frequency. - #clock-cells: From common clock bindings: Shall be 1. @@ -18,7 +25,7 @@ Optional properties: - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a board, or to compensate for external influences. -For both PLL1 and PLL2 an optional child node can be used to specify spread +For all PLL1, PLL2, ... an optional child node can be used to specify spread spectrum clocking parameters for a board. - spread-spectrum: SSC mode as defined in the data sheet. - spread-spectrum-center: Use "centered" mode instead of "max" mode. When diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt index 8c18b7b237bf..4ad703808407 100644 --- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt @@ -13,6 +13,9 @@ Required properties: "zte,zx296718-lsp1crm": zx296718 device level clock selection and gating + "zte,zx296718-audiocrm": + zx296718 audio clock selection, divider and gating + - reg: Address and length of the register set The clock consumer should specify the desired clock by having the clock |