diff options
Diffstat (limited to 'Documentation')
1085 files changed, 23448 insertions, 7237 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index d9d117d457e1..9b642669cb16 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -12,7 +12,6 @@ Description: This file shows ASIC health status. The possible values are: What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ cpld1_version cpld2_version - Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -21,6 +20,28 @@ Description: These files show with which CPLD versions have been burned The files are read only. +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + cpld3_version + +Date: November 2018 +KernelVersion: 4.21 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on LED board. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + jtag_enable + +Date: November 2018 +KernelVersion: 4.21 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files enable and disable the access to the JTAG domain. + By default access to the JTAG domain is disabled. + + The file is read/write. + What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio Date: June 2018 KernelVersion: 4.19 @@ -76,3 +97,21 @@ Description: These files show the system reset cause, as following: power reset cause. The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + reset_comex_pwr_fail + reset_from_comex + reset_system + reset_voltmon_upgrade_fail + +Date: November 2018 +KernelVersion: 4.21 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset cause, as following: ComEx + power fail, reset from ComEx, system platform reset, reset + due to voltage monitor devices upgrade failure, + Value 1 in file means this is reset cause, 0 - otherwise. + Only one bit could be 1 at the same time, representing only + the last reset cause. + + The files are read only. diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index dea212db9df3..7710d4022b19 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -244,7 +244,7 @@ Description: What: /sys/block/<disk>/queue/zoned Date: September 2016 -Contact: Damien Le Moal <damien.lemoal@hgst.com> +Contact: Damien Le Moal <damien.lemoal@wdc.com> Description: zoned indicates if the device is a zoned block device and the zone model of the device if it is indeed zoned. @@ -259,6 +259,14 @@ Description: zone commands, they will be treated as regular block devices and zoned will report "none". +What: /sys/block/<disk>/queue/nr_zones +Date: November 2018 +Contact: Damien Le Moal <damien.lemoal@wdc.com> +Description: + nr_zones indicates the total number of zones of a zoned block + device ("host-aware" or "host-managed" zone model). For regular + block devices, the value is always 0. + What: /sys/block/<disk>/queue/chunk_sectors Date: September 2016 Contact: Hannes Reinecke <hare@suse.com> @@ -268,6 +276,6 @@ Description: indicates the size in 512B sectors of the RAID volume stripe segment. For a zoned block device, either host-aware or host-managed, chunk_sectors indicates the - size of 512B sectors of the zones of the device, with + size in 512B sectors of the zones of the device, with the eventual exception of the last zone of the device which may be smaller. diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index c1513c756af1..9d2339a485c8 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -98,3 +98,35 @@ Description: The backing_dev file is read-write and set up backing device for zram to write incompressible pages. For using, user should enable CONFIG_ZRAM_WRITEBACK. + +What: /sys/block/zram<id>/idle +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + idle file is write-only and mark zram slot as idle. + If system has mounted debugfs, user can see which slots + are idle via /sys/kernel/debug/zram/zram<id>/block_state + +What: /sys/block/zram<id>/writeback +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The writeback file is write-only and trigger idle and/or + huge page writeback to backing device. + +What: /sys/block/zram<id>/bd_stat +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The bd_stat file is read-only and represents backing device's + statistics (bd_count, bd_reads, bd_writes) in a format + similar to block layer statistics file format. + +What: /sys/block/zram<id>/writeback_limit +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The writeback_limit file is read-write and specifies the maximum + amount of writeback ZRAM can do. The limit could be changed + in run time and "0" means disable the limit. + No limit is the initial state. diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c new file mode 100644 index 000000000000..2f332ec36f82 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i3c @@ -0,0 +1,146 @@ +What: /sys/bus/i3c/devices/i3c-<bus-id> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + An I3C bus. This directory will contain one sub-directory per + I3C device present on the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/current_master +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the master that owns the bus (<bus-id>-<master-pid>) at + the time this file is read. Note that bus ownership can change + overtime, so there's no guarantee that when the read() call + returns, the value returned is still valid. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/mode +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + I3C bus mode. Can be "pure", "mixed-fast" or "mixed-slow". See + the I3C specification for a detailed description of what each + of these modes implies. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/i3c_scl_frequency +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + The frequency (expressed in Hz) of the SCL signal when + operating in I3C SDR mode. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/i2c_scl_frequency +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + The frequency (expressed in Hz) of the SCL signal when + operating in I2C mode. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/dynamic_address +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Dynamic address assigned to the master controller. This + address may change if the bus is re-initialized. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/bcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + BCR stands for Bus Characteristics Register and express the + device capabilities in term of speed, maximum read/write + length, etc. See the I3C specification for more details. + This entry describes the BCR of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/dcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + DCR stands for Device Characteristics Register and express the + device capabilities in term of exposed features. See the I3C + specification for more details. + This entry describes the DCR of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/pid +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + PID stands for Provisional ID and is used to uniquely identify + a device on a bus. This PID contains information about the + vendor, the part and an instance ID so that several devices of + the same type can be connected on the same bus. + See the I3C specification for more details. + This entry describes the PID of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/hdrcap +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the HDR (High Data Rate) capabilities of a device. + Returns a list of supported HDR mode, each element is separated + by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR + modes. + This entry describes the HDRCAP of the master controller + driving the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + An I3C device present on I3C bus identified by <bus-id>. Note + that all devices are represented including the master driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dynamic_address +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Dynamic address assigned to device <bus-id>-<device-pid>. This + address may change if the bus is re-initialized. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/bcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + BCR stands for Bus Characteristics Register and express the + device capabilities in term of speed, maximum read/write + length, etc. See the I3C specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + DCR stands for Device Characteristics Register and express the + device capabilities in term of exposed features. See the I3C + specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + PID stands for Provisional ID and is used to uniquely identify + a device on a bus. This PID contains information about the + vendor, the part and an instance ID so that several devices of + the same type can be connected on the same bus. + See the I3C specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/hdrcap +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the HDR (High Data Rate) capabilities of a device. + Returns a list of supported HDR mode, each element is separated + by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR + modes. + +What: /sys/bus/i3c/devices/<bus-id>-<device-pid> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + These directories are just symbolic links to + /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>. diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 151584a1f950..b21fba14689b 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -21,6 +21,15 @@ Description: Holds a comma separated list of device unique_ids that If a device is authorized automatically during boot its boot attribute is set to 1. +What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection +Date: Mar 2019 +KernelVersion: 4.21 +Contact: thunderbolt-software@lists.01.org +Description: This attribute tells whether the system uses IOMMU + for DMA protection. Value of 1 means IOMMU is used 0 means + it is not (DMA protection is solely based on Thunderbolt + security levels). + What: /sys/bus/thunderbolt/devices/.../domainX/security Date: Sep 2017 KernelVersion: 4.13 diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern index fb3d1e03b881..1e5d172e0646 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern @@ -37,8 +37,8 @@ Description: 0-| / \/ \/ +---0----1----2----3----4----5----6------------> time (s) - 2. To make the LED go instantly from one brigntess value to another, - we should use use zero-time lengths (the brightness must be same as + 2. To make the LED go instantly from one brightness value to another, + we should use zero-time lengths (the brightness must be same as the previous tuple's). So the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2 duration_2 brightness_2 0 ...". For example: diff --git a/Documentation/ABI/testing/sysfs-class-net-dsa b/Documentation/ABI/testing/sysfs-class-net-dsa index f240221e071e..985d84c585c6 100644 --- a/Documentation/ABI/testing/sysfs-class-net-dsa +++ b/Documentation/ABI/testing/sysfs-class-net-dsa @@ -1,4 +1,4 @@ -What: /sys/class/net/<iface>/tagging +What: /sys/class/net/<iface>/dsa/tagging Date: August 2018 KernelVersion: 4.20 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-devices-software_node b/Documentation/ABI/testing/sysfs-devices-software_node new file mode 100644 index 000000000000..85df37de359f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-software_node @@ -0,0 +1,10 @@ +What: /sys/devices/.../software_node/ +Date: January 2019 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This directory contains the details about the device that are + assigned in kernel (i.e. software), as opposed to the + firmware_node directory which contains the details that are + assigned for the device in firmware. The main attributes in the + directory will show the properties the device has, and the + relationship it has to some of the other devices. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 73318225a368..9605dbd4b5b5 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -145,6 +145,8 @@ What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/name /sys/devices/system/cpu/cpuX/cpuidle/stateN/power /sys/devices/system/cpu/cpuX/cpuidle/stateN/time /sys/devices/system/cpu/cpuX/cpuidle/stateN/usage + /sys/devices/system/cpu/cpuX/cpuidle/stateN/above + /sys/devices/system/cpu/cpuX/cpuidle/stateN/below Date: September 2007 KernelVersion: v2.6.24 Contact: Linux power management list <linux-pm@vger.kernel.org> @@ -166,6 +168,11 @@ Description: usage: (RO) Number of times this state was entered (a count). + above: (RO) Number of times this state was entered, but the + observed CPU idle duration was too short for it (a count). + + below: (RO) Number of times this state was entered, but the + observed CPU idle duration was too long for it (a count). What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc Date: February 2008 diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 3ac41774ad3c..a7ce33199457 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -92,6 +92,15 @@ Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> Description: Controls the number of trials to find a victim segment. +What: /sys/fs/f2fs/<disk>/migration_granularity +Date: October 2018 +Contact: "Chao Yu" <yuchao0@huawei.com> +Description: + Controls migration granularity of garbage collection on large + section, it can let GC move partial segment{s} of one section + in one GC cycle, so that dispersing heavy overhead GC to + multiple lightweight one. + What: /sys/fs/f2fs/<disk>/dir_level Date: March 2014 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index ac66ae2509a9..e133ccd60228 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -60,15 +60,6 @@ the returned memory, like GFP_DMA). :: - void * - dma_zalloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) - -Wraps dma_alloc_coherent() and also zeroes the returned memory if the -allocation attempt succeeded. - -:: - void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_handle) @@ -717,12 +708,15 @@ dma-api/num_errors The number in this file shows how many dma-api/min_free_entries This read-only file can be read to get the minimum number of free dma_debug_entries the allocator has ever seen. If this value goes - down to zero the code will disable itself - because it is not longer reliable. + down to zero the code will attempt to increase + nr_total_entries to compensate. dma-api/num_free_entries The current number of free dma_debug_entries in the allocator. +dma-api/nr_total_entries The total number of dma_debug_entries in the + allocator, both free and used. + dma-api/driver-filter You can write a name of a driver into this file to limit the debug output to requests from that particular driver. Write an empty string to @@ -742,10 +736,15 @@ driver filter at boot time. The debug code will only print errors for that driver afterwards. This filter can be disabled or changed later using debugfs. When the code disables itself at runtime this is most likely because it ran -out of dma_debug_entries. These entries are preallocated at boot. The number -of preallocated entries is defined per architecture. If it is too low for you -boot with 'dma_debug_entries=<your_desired_number>' to overwrite the -architectural default. +out of dma_debug_entries and was unable to allocate more on-demand. 65536 +entries are preallocated at boot - if this is too low for you boot with +'dma_debug_entries=<your_desired_number>' to overwrite the default. Note +that the code allocates entries in batches, so the exact number of +preallocated entries may be greater than the actual number requested. The +code will print to the kernel log each time it has dynamically allocated +as many entries as were initially preallocated. This is to indicate that a +larger preallocation size may be appropriate, or if it happens continually +that a driver may be leaking mappings. :: diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S index 6f3e4b75e49e..4aed3f9ab88a 100644 --- a/Documentation/EDID/1024x768.S +++ b/Documentation/EDID/1024x768.S @@ -31,14 +31,13 @@ #define YBLANK 38 #define XOFFSET 8 #define XPULSE 144 -#define YOFFSET (63+3) -#define YPULSE (63+6) +#define YOFFSET 3 +#define YPULSE 6 #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux XGA" #define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ #define HSYNC_POL 0 #define VSYNC_POL 0 -#define CRC 0x55 #include "edid.S" diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S index bd9bef2a65af..b26dd424cad7 100644 --- a/Documentation/EDID/1280x1024.S +++ b/Documentation/EDID/1280x1024.S @@ -31,14 +31,13 @@ #define YBLANK 42 #define XOFFSET 48 #define XPULSE 112 -#define YOFFSET (63+1) -#define YPULSE (63+3) +#define YOFFSET 1 +#define YPULSE 3 #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SXGA" /* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 -#define CRC 0xa0 #include "edid.S" diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S index a45101c6160c..0d091b282768 100644 --- a/Documentation/EDID/1600x1200.S +++ b/Documentation/EDID/1600x1200.S @@ -31,14 +31,13 @@ #define YBLANK 50 #define XOFFSET 64 #define XPULSE 192 -#define YOFFSET (63+1) -#define YPULSE (63+3) +#define YOFFSET 1 +#define YPULSE 3 #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux UXGA" /* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 -#define CRC 0x9d #include "edid.S" diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S index b0d7c69282b4..7dfed9a33eab 100644 --- a/Documentation/EDID/1680x1050.S +++ b/Documentation/EDID/1680x1050.S @@ -31,14 +31,13 @@ #define YBLANK 39 #define XOFFSET 104 #define XPULSE 176 -#define YOFFSET (63+3) -#define YPULSE (63+6) +#define YOFFSET 3 +#define YPULSE 6 #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux WSXGA" /* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 -#define CRC 0x26 #include "edid.S" diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S index 3084355e81e7..d6ffbba28e95 100644 --- a/Documentation/EDID/1920x1080.S +++ b/Documentation/EDID/1920x1080.S @@ -31,14 +31,13 @@ #define YBLANK 45 #define XOFFSET 88 #define XPULSE 44 -#define YOFFSET (63+4) -#define YPULSE (63+5) +#define YOFFSET 4 +#define YPULSE 5 #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux FHD" /* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 -#define CRC 0x05 #include "edid.S" diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S index 6644e26d5801..a5616588de08 100644 --- a/Documentation/EDID/800x600.S +++ b/Documentation/EDID/800x600.S @@ -28,14 +28,13 @@ #define YBLANK 28 #define XOFFSET 40 #define XPULSE 128 -#define YOFFSET (63+1) -#define YPULSE (63+4) +#define YOFFSET 1 +#define YPULSE 4 #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SVGA" #define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */ #define HSYNC_POL 1 #define VSYNC_POL 1 -#define CRC 0xc2 #include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt index 835db332289b..539871c3b785 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/HOWTO.txt @@ -45,14 +45,5 @@ EDID: #define YPIX vdisp #define YBLANK vtotal-vdisp -#define YOFFSET (63+(vsyncstart-vdisp)) -#define YPULSE (63+(vsyncend-vsyncstart)) - -The CRC value in the last line - #define CRC 0x55 -also is a bit tricky. After a first version of the binary data set is -created, it must be checked with the "edid-decode" utility which will -most probably complain about a wrong CRC. Fortunately, the utility also -displays the correct CRC which must then be inserted into the source -file. After the make procedure is repeated, the EDID data set is ready -to be used. +#define YOFFSET vsyncstart-vdisp +#define YPULSE vsyncend-vsyncstart diff --git a/Documentation/EDID/Makefile b/Documentation/EDID/Makefile index 17763ca3f12b..85a927dfab02 100644 --- a/Documentation/EDID/Makefile +++ b/Documentation/EDID/Makefile @@ -15,10 +15,21 @@ clean: %.o: %.S @cc -c $^ -%.bin: %.o +%.bin.nocrc: %.o @objcopy -Obinary $^ $@ -%.bin.ihex: %.o +%.crc: %.bin.nocrc + @list=$$(for i in `seq 1 127`; do head -c$$i $^ | tail -c1 \ + | hexdump -v -e '/1 "%02X+"'; done); \ + echo "ibase=16;100-($${list%?})%100" | bc >$@ + +%.p: %.crc %.S + @cc -c -DCRC="$$(cat $*.crc)" -o $@ $*.S + +%.bin: %.p + @objcopy -Obinary $^ $@ + +%.bin.ihex: %.p @objcopy -Oihex $^ $@ @dos2unix $@ 2>/dev/null diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S index ef082dcc6084..c3d13815526d 100644 --- a/Documentation/EDID/edid.S +++ b/Documentation/EDID/edid.S @@ -47,9 +47,11 @@ #define mfgname2id(v1,v2,v3) \ ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) #define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) +#define lsbs2(v1,v2) (((v1&0x0f)<<4)+(v2&0x0f)) #define msbs2(v1,v2) ((((v1>>8)&0x0f)<<4)+((v2>>8)&0x0f)) #define msbs4(v1,v2,v3,v4) \ - (((v1&0x03)>>2)+((v2&0x03)>>4)+((v3&0x03)>>6)+((v4&0x03)>>8)) + ((((v1>>8)&0x03)<<6)+(((v2>>8)&0x03)<<4)+\ + (((v3>>4)&0x03)<<2)+((v4>>4)&0x03)) #define pixdpi2mm(pix,dpi) ((pix*25)/dpi) #define xsize pixdpi2mm(XPIX,DPI) #define ysize pixdpi2mm(YPIX,DPI) @@ -200,9 +202,9 @@ y_msbs: .byte msbs2(YPIX,YBLANK) x_snc_off_lsb: .byte XOFFSET&0xff /* Horizontal sync pulse width pixels 8 lsbits (0-1023) */ x_snc_pls_lsb: .byte XPULSE&0xff -/* Bits 7-4 Vertical sync offset lines 4 lsbits -63) - Bits 3-0 Vertical sync pulse width lines 4 lsbits -63) */ -y_snc_lsb: .byte ((YOFFSET-63)<<4)+(YPULSE-63) +/* Bits 7-4 Vertical sync offset lines 4 lsbits (0-63) + Bits 3-0 Vertical sync pulse width lines 4 lsbits (0-63) */ +y_snc_lsb: .byte lsbs2(YOFFSET, YPULSE) /* Bits 7-6 Horizontal sync offset pixels 2 msbits Bits 5-4 Horizontal sync pulse width pixels 2 msbits Bits 3-2 Vertical sync offset lines 2 msbits diff --git a/Documentation/Makefile b/Documentation/Makefile index 2ca77ad0f238..9786957c6a35 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -2,7 +2,7 @@ # Makefile for Sphinx documentation # -subdir-y := +subdir-y := devicetree/bindings/ # You can set these variables from the command line. SPHINXBUILD = sphinx-build diff --git a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg deleted file mode 100644 index 9bbb1944f962..000000000000 --- a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg +++ /dev/null @@ -1,499 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> - -<!-- CreationDate: Wed Dec 9 17:26:09 2015 --> - -<!-- Magnification: 2.000 --> - -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="5.7in" - height="6.6in" - viewBox="-44 -44 6838 7888" - id="svg2" - version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="BigTreeClassicRCUBH.fig"> - <metadata - id="metadata110"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - <dc:title></dc:title> - </cc:Work> - </rdf:RDF> - </metadata> - <defs - id="defs108"> - <marker - inkscape:stockid="Arrow1Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow1Mend" - style="overflow:visible;"> - <path - id="path3868" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> - </marker> - <marker - inkscape:stockid="Arrow2Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow2Mend" - style="overflow:visible;"> - <path - id="path3886" - style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" - d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " - transform="scale(0.6) rotate(180) translate(0,0)" /> - </marker> - </defs> - <sodipodi:namedview - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1" - objecttolerance="10" - gridtolerance="10" - guidetolerance="10" - inkscape:pageopacity="0" - inkscape:pageshadow="2" - inkscape:window-width="878" - inkscape:window-height="1148" - id="namedview106" - showgrid="false" - inkscape:zoom="1.3547758" - inkscape:cx="256.5" - inkscape:cy="297" - inkscape:window-x="45" - inkscape:window-y="24" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> - <g - style="stroke-width:.025in; fill:none" - id="g4"> - <!-- Line: box --> - <rect - x="450" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> - <!-- Line: box --> - <rect - x="4950" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect8" /> - <!-- Line: box --> - <rect - x="750" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect10" /> - <!-- Line: box --> - <rect - x="0" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect12" /> - <!-- Line: box --> - <rect - x="300" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect14" /> - <!-- Circle --> - <circle - cx="2850" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle16" /> - <!-- Circle --> - <circle - cx="3150" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle18" /> - <!-- Circle --> - <circle - cx="3450" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle20" /> - <!-- Circle --> - <circle - cx="1350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle22" /> - <!-- Circle --> - <circle - cx="1650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle24" /> - <!-- Circle --> - <circle - cx="1950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle26" /> - <!-- Circle --> - <circle - cx="4350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle28" /> - <!-- Circle --> - <circle - cx="4650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle30" /> - <!-- Circle --> - <circle - cx="4950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle32" /> - <!-- Line --> - <polyline - points="1350,3450 2350,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline34" /> - <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> - <!-- Line --> - <polyline - points="4950,3450 3948,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline38" /> - <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> - <!-- Line: box --> - <rect - x="750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect42" /> - <!-- Line --> - <polyline - points="2250,5400 2250,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline44" /> - <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> - <!-- Line: box --> - <rect - x="1500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect48" /> - <!-- Line: box --> - <rect - x="300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect50" /> - <!-- Line: box --> - <rect - x="3750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect52" /> - <!-- Line: box --> - <rect - x="4500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect54" /> - <!-- Line: box --> - <rect - x="3300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect56" /> - <!-- Line: box --> - <rect - x="2250" - y="1650" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect58" /> - <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text60">rcu_bh</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="1950" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text62">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2250" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text64">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text66">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text68">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text70">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text72">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text74">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text76">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text78">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text80">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text82">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text84">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text86">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text88">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="450" - y="1350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="start" - id="text90">struct rcu_state</text> - <!-- Text --> - <text - xml:space="preserve" - x="6000" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text92">rcu_sched</text> - <!-- Line --> - <polyline - points="5250,5400 5250,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline94" /> - <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> - <!-- Line --> - <polyline - points="4050,6600 4050,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline98" /> - <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> - <!-- Line --> - <polyline - points="1050,6600 1050,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline102" /> - <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> - </g> -</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg deleted file mode 100644 index 21ba7823479d..000000000000 --- a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg +++ /dev/null @@ -1,695 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> - -<!-- CreationDate: Wed Dec 9 17:20:02 2015 --> - -<!-- Magnification: 2.000 --> - -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="5.7in" - height="8.6in" - viewBox="-44 -44 6838 10288" - id="svg2" - version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="BigTreeClassicRCUBHdyntick.fig"> - <metadata - id="metadata166"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - <dc:title></dc:title> - </cc:Work> - </rdf:RDF> - </metadata> - <defs - id="defs164"> - <marker - inkscape:stockid="Arrow1Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow1Mend" - style="overflow:visible;"> - <path - id="path3924" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> - </marker> - <marker - inkscape:stockid="Arrow2Lend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow2Lend" - style="overflow:visible;"> - <path - id="path3936" - style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" - d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " - transform="scale(1.1) rotate(180) translate(1,0)" /> - </marker> - </defs> - <sodipodi:namedview - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1" - objecttolerance="10" - gridtolerance="10" - guidetolerance="10" - inkscape:pageopacity="0" - inkscape:pageshadow="2" - inkscape:window-width="845" - inkscape:window-height="988" - id="namedview162" - showgrid="false" - inkscape:zoom="1.0452196" - inkscape:cx="256.5" - inkscape:cy="387.00003" - inkscape:window-x="356" - inkscape:window-y="61" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> - <g - style="stroke-width:.025in; fill:none" - id="g4"> - <!-- Line: box --> - <rect - x="450" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> - <!-- Line: box --> - <rect - x="4950" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect8" /> - <!-- Line: box --> - <rect - x="750" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect10" /> - <!-- Line --> - <polyline - points="5250,8100 5688,5912 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline12" /> - <!-- Arrowhead on XXXpoint 5250 8100 - 5710 5790--> - <polyline - points="5714 6068 5704 5822 5598 6044 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline14" /> - <!-- Line --> - <polyline - points="4050,9300 4486,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline16" /> - <!-- Arrowhead on XXXpoint 4050 9300 - 4512 7140--> - <polyline - points="4514 7418 4506 7172 4396 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline18" /> - <!-- Line --> - <polyline - points="1040,9300 1476,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline20" /> - <!-- Arrowhead on XXXpoint 1040 9300 - 1502 7140--> - <polyline - points="1504 7418 1496 7172 1386 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline22" /> - <!-- Line --> - <polyline - points="2240,8100 2676,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline24" /> - <!-- Arrowhead on XXXpoint 2240 8100 - 2702 5940--> - <polyline - points="2704 6218 2696 5972 2586 6194 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline26" /> - <!-- Line: box --> - <rect - x="0" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect28" /> - <!-- Line: box --> - <rect - x="300" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect30" /> - <!-- Line --> - <polyline - points="1350,3450 2350,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline32" /> - <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> - <!-- Line --> - <polyline - points="4950,3450 3948,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline36" /> - <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> - <!-- Line --> - <polyline - points="4050,6600 4050,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline40" /> - <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> - <!-- Line --> - <polyline - points="1050,6600 1050,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline44" /> - <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> - <!-- Line --> - <polyline - points="2250,5400 2250,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline48" /> - <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> - <!-- Line --> - <polyline - points="2250,8100 2250,6364 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline52" /> - <!-- Arrowhead on XXXpoint 2250 8100 - 2250 6240--> - <!-- Line --> - <polyline - points="1050,9300 1050,7564 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline56" /> - <!-- Arrowhead on XXXpoint 1050 9300 - 1050 7440--> - <!-- Line --> - <polyline - points="4050,9300 4050,7564 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline60" /> - <!-- Arrowhead on XXXpoint 4050 9300 - 4050 7440--> - <!-- Line --> - <polyline - points="5250,8100 5250,6364 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline64" /> - <!-- Arrowhead on XXXpoint 5250 8100 - 5250 6240--> - <!-- Circle --> - <circle - cx="2850" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle68" /> - <!-- Circle --> - <circle - cx="3150" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle70" /> - <!-- Circle --> - <circle - cx="3450" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle72" /> - <!-- Circle --> - <circle - cx="1350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle74" /> - <!-- Circle --> - <circle - cx="1650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle76" /> - <!-- Circle --> - <circle - cx="1950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle78" /> - <!-- Circle --> - <circle - cx="4350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle80" /> - <!-- Circle --> - <circle - cx="4650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle82" /> - <!-- Circle --> - <circle - cx="4950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle84" /> - <!-- Line: box --> - <rect - x="750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect86" /> - <!-- Line: box --> - <rect - x="300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect88" /> - <!-- Line: box --> - <rect - x="3750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect90" /> - <!-- Line: box --> - <rect - x="4500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect92" /> - <!-- Line: box --> - <rect - x="3300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect94" /> - <!-- Line: box --> - <rect - x="2250" - y="1650" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect96" /> - <!-- Line: box --> - <rect - x="0" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect98" /> - <!-- Line: box --> - <rect - x="1350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect100" /> - <!-- Line: box --> - <rect - x="3000" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect102" /> - <!-- Line: box --> - <rect - x="4350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect104" /> - <!-- Line: box --> - <rect - x="1500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect106" /> - <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text108">rcu_bh</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="1950" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text110">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2250" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text112">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text114">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text116">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text118">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text120">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text122">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text124">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text126">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text128">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text130">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text132">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text134">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text136">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="450" - y="1350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="start" - id="text138">struct rcu_state</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text140">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text142">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text144">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text146">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text148">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text150">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text152">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text154">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="6000" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text156">rcu_sched</text> - <!-- Line --> - <polyline - points="5250,5400 5250,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline158" /> - <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> - </g> -</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg deleted file mode 100644 index 15adcac036c7..000000000000 --- a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg +++ /dev/null @@ -1,741 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> - -<!-- CreationDate: Wed Dec 9 17:32:59 2015 --> - -<!-- Magnification: 2.000 --> - -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="6.1in" - height="8.9in" - viewBox="-44 -44 7288 10738" - id="svg2" - version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="BigTreePreemptRCUBHdyntick.fig"> - <metadata - id="metadata182"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - <dc:title></dc:title> - </cc:Work> - </rdf:RDF> - </metadata> - <defs - id="defs180"> - <marker - inkscape:stockid="Arrow1Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow1Mend" - style="overflow:visible;"> - <path - id="path3940" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> - </marker> - </defs> - <sodipodi:namedview - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1" - objecttolerance="10" - gridtolerance="10" - guidetolerance="10" - inkscape:pageopacity="0" - inkscape:pageshadow="2" - inkscape:window-width="874" - inkscape:window-height="1148" - id="namedview178" - showgrid="false" - inkscape:zoom="1.2097379" - inkscape:cx="274.5" - inkscape:cy="400.49997" - inkscape:window-x="946" - inkscape:window-y="24" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> - <g - style="stroke-width:.025in; fill:none" - id="g4"> - <!-- Line: box --> - <rect - x="900" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> - <!-- Line: box --> - <rect - x="1200" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect8" /> - <!-- Line: box --> - <rect - x="5400" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect10" /> - <!-- Line: box --> - <rect - x="450" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect12" /> - <!-- Line: box --> - <rect - x="750" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect14" /> - <!-- Line: box --> - <rect - x="4950" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect16" /> - <!-- Line --> - <polyline - points="5250,8550 5688,6362 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline18" /> - <!-- Arrowhead on XXXpoint 5250 8550 - 5710 6240--> - <polyline - points="5714 6518 5704 6272 5598 6494 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline20" /> - <!-- Line --> - <polyline - points="4050,9750 4486,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline22" /> - <!-- Arrowhead on XXXpoint 4050 9750 - 4512 7590--> - <polyline - points="4514 7868 4506 7622 4396 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline24" /> - <!-- Line --> - <polyline - points="1040,9750 1476,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline26" /> - <!-- Arrowhead on XXXpoint 1040 9750 - 1502 7590--> - <polyline - points="1504 7868 1496 7622 1386 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline28" /> - <!-- Line --> - <polyline - points="2240,8550 2676,6512 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline30" /> - <!-- Arrowhead on XXXpoint 2240 8550 - 2702 6390--> - <polyline - points="2704 6668 2696 6422 2586 6644 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline32" /> - <!-- Line --> - <polyline - points="4050,9750 5682,6360 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline34" /> - <!-- Arrowhead on XXXpoint 4050 9750 - 5736 6246--> - <polyline - points="5672 6518 5722 6276 5562 6466 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline36" /> - <!-- Line --> - <polyline - points="1010,9750 2642,6360 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline38" /> - <!-- Arrowhead on XXXpoint 1010 9750 - 2696 6246--> - <polyline - points="2632 6518 2682 6276 2522 6466 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline40" /> - <!-- Line: box --> - <rect - x="0" - y="900" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect42" /> - <!-- Line: box --> - <rect - x="300" - y="1500" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect44" /> - <!-- Line --> - <polyline - points="1350,3900 2350,3040 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline46" /> - <!-- Arrowhead on XXXpoint 1350 3900 - 2444 2960--> - <!-- Line --> - <polyline - points="4950,3900 3948,3040 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline50" /> - <!-- Arrowhead on XXXpoint 4950 3900 - 3854 2960--> - <!-- Line --> - <polyline - points="4050,7050 4050,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline54" /> - <!-- Arrowhead on XXXpoint 4050 7050 - 4050 4740--> - <!-- Line --> - <polyline - points="1050,7050 1050,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline58" /> - <!-- Arrowhead on XXXpoint 1050 7050 - 1050 4740--> - <!-- Line --> - <polyline - points="2250,5850 2250,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline62" /> - <!-- Arrowhead on XXXpoint 2250 5850 - 2250 4740--> - <!-- Line --> - <polyline - points="2250,8550 2250,6814 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline66" /> - <!-- Arrowhead on XXXpoint 2250 8550 - 2250 6690--> - <!-- Line --> - <polyline - points="1050,9750 1050,8014 " - style="stroke:#00ff00;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline70" /> - <!-- Arrowhead on XXXpoint 1050 9750 - 1050 7890--> - <!-- Line --> - <polyline - points="4050,9750 4050,8014 " - style="stroke:#00ff00;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline74" /> - <!-- Arrowhead on XXXpoint 4050 9750 - 4050 7890--> - <!-- Line --> - <polyline - points="5250,8550 5250,6814 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline78" /> - <!-- Arrowhead on XXXpoint 5250 8550 - 5250 6690--> - <!-- Circle --> - <circle - cx="2850" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle82" /> - <!-- Circle --> - <circle - cx="3150" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle84" /> - <!-- Circle --> - <circle - cx="3450" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle86" /> - <!-- Circle --> - <circle - cx="1350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle88" /> - <!-- Circle --> - <circle - cx="1650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle90" /> - <!-- Circle --> - <circle - cx="1950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle92" /> - <!-- Circle --> - <circle - cx="4350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle94" /> - <!-- Circle --> - <circle - cx="4650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle96" /> - <!-- Circle --> - <circle - cx="4950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle98" /> - <!-- Line: box --> - <rect - x="750" - y="3900" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect100" /> - <!-- Line: box --> - <rect - x="300" - y="7050" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect102" /> - <!-- Line: box --> - <rect - x="3750" - y="3900" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect104" /> - <!-- Line: box --> - <rect - x="4500" - y="5850" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect106" /> - <!-- Line: box --> - <rect - x="3300" - y="7050" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect108" /> - <!-- Line: box --> - <rect - x="2250" - y="2100" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect110" /> - <!-- Line: box --> - <rect - x="0" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect112" /> - <!-- Line: box --> - <rect - x="1350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect114" /> - <!-- Line: box --> - <rect - x="3000" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect116" /> - <!-- Line: box --> - <rect - x="4350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect118" /> - <!-- Line: box --> - <rect - x="1500" - y="5850" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect120" /> - <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text122">rcu_bh</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text124">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text126">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text128">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4500" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text130">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4500" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text132">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text134">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text136">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6450" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text138">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text140">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7650" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text142">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text144">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6450" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text146">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text148">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7650" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text150">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="450" - y="1800" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="start" - id="text152">struct rcu_state</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text154">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text156">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text158">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text160">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text162">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text164">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text166">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text168">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="6900" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text170">rcu_preempt</text> - <!-- Text --> - <text - xml:space="preserve" - x="6000" - y="1200" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text172">rcu_sched</text> - <!-- Line --> - <polyline - points="5250,5850 5250,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline174" /> - <!-- Arrowhead on XXXpoint 5250 5850 - 5250 4740--> - </g> -</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg index bbc3801470d0..3a1a4f85dc3a 100644 --- a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg +++ b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg @@ -13,12 +13,12 @@ xmlns="http://www.w3.org/2000/svg" xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="7.4in" - height="9.9in" - viewBox="-44 -44 8938 11938" + width="7.4000001in" + height="7.9000001in" + viewBox="-44 -44 8938 9526.283" id="svg2" version="1.1" - inkscape:version="0.48.4 r9939" + inkscape:version="0.92.2pre0 (973e216, 2017-07-25)" sodipodi:docname="BigTreePreemptRCUBHdyntickCB.svg"> <metadata id="metadata212"> @@ -37,15 +37,46 @@ <marker inkscape:stockid="Arrow1Mend" orient="auto" - refY="0.0" - refX="0.0" + refY="0" + refX="0" + id="marker1177" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path897" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Lend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path891" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.8,0,0,-0.8,-10,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0" + refX="0" id="Arrow1Mend" - style="overflow:visible;"> + style="overflow:visible"> <path id="path3970" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> </marker> </defs> <sodipodi:namedview @@ -57,802 +88,575 @@ guidetolerance="10" inkscape:pageopacity="0" inkscape:pageshadow="2" - inkscape:window-width="881" - inkscape:window-height="1128" + inkscape:window-width="1920" + inkscape:window-height="1019" id="namedview208" showgrid="false" inkscape:zoom="1.0195195" - inkscape:cx="333" - inkscape:cy="445.49997" - inkscape:window-x="936" - inkscape:window-y="24" - inkscape:window-maximized="0" + inkscape:cx="166.25478" + inkscape:cy="362.18693" + inkscape:window-x="0" + inkscape:window-y="0" + inkscape:window-maximized="1" inkscape:current-layer="g4" /> <g - style="stroke-width:.025in; fill:none" - id="g4"> + style="fill:none;stroke-width:0.025in" + id="g4" + transform="translate(0,-2415.6743)"> <!-- Line: box --> - <rect - x="900" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> <!-- Line: box --> - <rect - x="1200" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect8" /> <!-- Line: box --> - <rect - x="5400" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect10" /> <!-- Line: box --> - <rect - x="450" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect12" /> <!-- Line: box --> - <rect - x="750" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect14" /> <!-- Line: box --> - <rect - x="4950" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect16" /> <!-- Line --> - <polyline - points="5250,8550 5688,6362 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline18" /> <!-- Arrowhead on XXXpoint 5250 8550 - 5710 6240--> <polyline points="5714 6518 5704 6272 5598 6494 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline20" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline20" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="4050,9750 4486,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline22" /> <!-- Arrowhead on XXXpoint 4050 9750 - 4512 7590--> <polyline points="4514 7868 4506 7622 4396 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline24" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline24" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="1040,9750 1476,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline26" /> <!-- Arrowhead on XXXpoint 1040 9750 - 1502 7590--> <polyline points="1504 7868 1496 7622 1386 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline28" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline28" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="2240,8550 2676,6512 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline30" /> <!-- Arrowhead on XXXpoint 2240 8550 - 2702 6390--> <polyline points="2704 6668 2696 6422 2586 6644 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline32" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline32" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="4050,9600 5692,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline34" /> <!-- Arrowhead on XXXpoint 4050 9600 - 5744 5948--> <polyline points="5682 6220 5730 5978 5574 6170 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline36" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline36" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="1086,9600 2728,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline38" /> <!-- Arrowhead on XXXpoint 1086 9600 - 2780 5948--> <polyline points="2718 6220 2766 5978 2610 6170 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline40" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline40" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line: box --> <rect - x="0" - y="900" + x="12.340758" + y="2442.5947" width="6300" - height="7350" + height="7045.3135" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + style="fill:#ffffff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect42" /> <!-- Line: box --> <rect - x="300" - y="1500" + x="312.34076" + y="3017.7224" width="5700" - height="3750" + height="3594.5476" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + style="fill:#ffff00;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect44" /> <!-- Line --> <polyline points="1350,3900 2350,3040 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline46" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline46" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 1350 3900 - 2444 2960--> <!-- Line --> <polyline points="4950,3900 3948,3040 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline50" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline50" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 4950 3900 - 3854 2960--> <!-- Line --> <polyline points="4050,7050 4050,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline54" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline54" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 4050 7050 - 4050 4740--> <!-- Line --> <polyline points="1050,7050 1050,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline58" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline58" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 1050 7050 - 1050 4740--> <!-- Line --> <polyline points="2250,5850 2250,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline62" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline62" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 2250 5850 - 2250 4740--> <!-- Line --> - <polyline - points="2250,8550 2250,6814 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline66" /> <!-- Arrowhead on XXXpoint 2250 8550 - 2250 6690--> <!-- Line --> - <polyline - points="1050,9750 1050,8014 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline70" /> <!-- Arrowhead on XXXpoint 1050 9750 - 1050 7890--> <!-- Line --> - <polyline - points="4050,9750 4050,8014 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline74" /> <!-- Arrowhead on XXXpoint 4050 9750 - 4050 7890--> <!-- Line --> - <polyline - points="5250,8550 5250,6814 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline78" /> <!-- Arrowhead on XXXpoint 5250 8550 - 5250 6690--> <!-- Line --> - <polyline - points="6000,6300 8048,7910 " - style="stroke:#87cfff;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline82" /> <!-- Arrowhead on XXXpoint 6000 6300 - 8146 7986--> <!-- Circle --> - <circle - cx="2850" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle86" /> + <ellipse + cx="2862.3408" + cy="5749.5786" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle86" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="3150" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle88" /> + <ellipse + cx="3162.3408" + cy="5749.5786" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle88" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="3450" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle90" /> + <ellipse + cx="3462.3408" + cy="5749.5786" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle90" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="1350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle92" /> + <ellipse + cx="1362.3407" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle92" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="1650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle94" /> + <ellipse + cx="1662.3407" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle94" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="1950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle96" /> + <ellipse + cx="1962.3407" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle96" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="4350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle98" /> + <ellipse + cx="4362.3408" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle98" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="4650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle100" /> + <ellipse + cx="4662.3408" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle100" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="4950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle102" /> + <ellipse + cx="4962.3408" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle102" + rx="76" + ry="72.849495" /> <!-- Line: box --> <rect - x="7350" - y="7950" + x="6745.3027" + y="8146.0654" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect104" /> <!-- Line: box --> <rect - x="7350" - y="9450" + x="6745.3027" + y="9583.8857" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect106" /> <!-- Line --> <polyline points="8100,8850 8100,9384 " - style="stroke:#000000;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline108" /> + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter;marker-end:url(#Arrow1Mend)" + id="polyline108" + transform="matrix(1,0,0,0.95854605,-604.69715,525.62477)" /> <!-- Arrowhead on XXXpoint 8100 8850 - 8100 9510--> <!-- Line: box --> <rect - x="7350" - y="10950" + x="6745.3027" + y="11021.704" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect112" /> <!-- Line --> <polyline points="8100,10350 8100,10884 " - style="stroke:#000000;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline114" /> + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter;marker-end:url(#Arrow1Mend)" + id="polyline114" + transform="matrix(1,0,0,0.95854605,-604.69715,525.62477)" /> <!-- Arrowhead on XXXpoint 8100 10350 - 8100 11010--> <!-- Line: box --> <rect - x="750" - y="3900" + x="762.34076" + y="5318.2324" width="1800" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect118" /> <!-- Line: box --> <rect - x="300" - y="7050" + x="312.34076" + y="8337.6533" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect120" /> <!-- Line: box --> <rect - x="3750" - y="3900" + x="3762.3408" + y="5318.2324" width="1800" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect122" /> <!-- Line: box --> <rect - x="4500" - y="5850" + x="4512.3408" + y="7187.3975" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect124" /> <!-- Line: box --> <rect - x="3300" - y="7050" + x="3312.3408" + y="8337.6533" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect126" /> <!-- Line: box --> <rect - x="2250" - y="2100" + x="2262.3408" + y="3592.8503" width="1800" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect128" /> <!-- Line: box --> - <rect - x="0" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect130" /> <!-- Line: box --> - <rect - x="1350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect132" /> <!-- Line: box --> - <rect - x="3000" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect134" /> <!-- Line: box --> - <rect - x="4350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect136" /> <!-- Line: box --> <rect - x="1500" - y="5850" + x="1512.3407" + y="7187.3975" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect138" /> <!-- Text --> <text xml:space="preserve" - x="8100" - y="8250" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="8614.0625" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text140">struct</text> + id="text140" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="8550" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="8907.7783" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text142">rcu_head</text> + id="text142" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_head</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="9750" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="10082.644" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text144">struct</text> + id="text144" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="10050" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="10376.36" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text146">rcu_head</text> + id="text146" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_head</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="11250" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="11551.224" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text148">struct</text> + id="text148" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="11550" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="11844.94" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text150">rcu_head</text> + id="text150" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_head</text> <!-- Text --> <text xml:space="preserve" - x="6000" - y="1200" - fill="#000000" - font-family="Helvetica" + x="5886.4043" + y="2788.5688" font-style="normal" font-weight="normal" font-size="192" - text-anchor="end" - id="text152">rcu_sched</text> + id="text152" + style="font-style:normal;font-weight:normal;font-size:187.978302px;font-family:Helvetica;text-anchor:end;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_state</text> <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text154">rcu_bh</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="2400" - fill="#000000" - font-family="Courier" + x="3096.1016" + y="3963.4336" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text156">struct</text> + id="text156" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="2700" - fill="#000000" - font-family="Courier" + x="3096.1016" + y="4257.1494" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text158">rcu_node</text> + id="text158" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="4200" - fill="#000000" - font-family="Courier" + x="1627.5209" + y="5725.7305" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text160">struct</text> + id="text160" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="4500" - fill="#000000" - font-family="Courier" + x="1627.5209" + y="6019.4463" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text162">rcu_node</text> + id="text162" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="4650" - y="4500" - fill="#000000" - font-family="Courier" + x="4564.6821" + y="6019.4463" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text164">rcu_node</text> + id="text164" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="4650" - y="4200" - fill="#000000" - font-family="Courier" + x="4564.6821" + y="5725.7305" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text166">struct</text> + id="text166" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="6150" - fill="#000000" - font-family="Courier" + x="2214.9531" + y="7634.8848" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text168">struct</text> + id="text168" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="6450" - fill="#000000" - font-family="Courier" + x="2214.9531" + y="7928.6011" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text170">rcu_data</text> + id="text170" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="7350" - fill="#000000" - font-family="Courier" + x="1040.0886" + y="8809.749" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text172">struct</text> + id="text172" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="7650" - fill="#000000" - font-family="Courier" + x="1040.0886" + y="9103.4648" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text174">rcu_data</text> + id="text174" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="6150" - fill="#000000" - font-family="Courier" + x="5152.1138" + y="7634.8848" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text176">struct</text> + id="text176" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="6450" - fill="#000000" - font-family="Courier" + x="5152.1138" + y="7928.6011" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text178">rcu_data</text> + id="text178" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="7350" - fill="#000000" - font-family="Courier" + x="3977.2495" + y="8809.749" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text180">struct</text> + id="text180" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="7650" - fill="#000000" - font-family="Courier" + x="3977.2495" + y="9103.4648" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text182">rcu_data</text> + id="text182" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="450" - y="1800" - fill="#000000" - font-family="Courier" + x="452.6564" + y="3376.0012" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text184">struct rcu_state</text> + id="text184" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:start;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct rcu_state</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text186">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text188">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text190">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text192">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text194">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text196">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text198">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text200">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="6900" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text202">rcu_preempt</text> <!-- Line --> <polyline points="5250,5850 5250,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline204" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline204" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 5250 5850 - 5250 4740--> + <path + style="fill:none;stroke:#000000;stroke-width:34.24744034;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#marker1177)" + d="m 6000.1472,7564.2558 c 1498.5508,0 1498.5508,0 1498.5508,0 v 520.0252" + id="path886" + inkscape:connector-curvature="0" /> </g> </svg> diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html index 1d2051c0c3fc..18f179807563 100644 --- a/Documentation/RCU/Design/Data-Structures/Data-Structures.html +++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html @@ -23,8 +23,6 @@ to each other. The <tt>rcu_segcblist</tt> Structure</a> <li> <a href="#The rcu_data Structure"> The <tt>rcu_data</tt> Structure</a> -<li> <a href="#The rcu_dynticks Structure"> - The <tt>rcu_dynticks</tt> Structure</a> <li> <a href="#The rcu_head Structure"> The <tt>rcu_head</tt> Structure</a> <li> <a href="#RCU-Specific Fields in the task_struct Structure"> @@ -127,9 +125,11 @@ CPUs, RCU would configure the <tt>rcu_node</tt> tree as follows: </p><p>RCU currently permits up to a four-level tree, which on a 64-bit system accommodates up to 4,194,304 CPUs, though only a mere 524,288 CPUs for 32-bit systems. -On the other hand, you can set <tt>CONFIG_RCU_FANOUT</tt> to be -as small as 2 if you wish, which would permit only 16 CPUs, which -is useful for testing. +On the other hand, you can set both <tt>CONFIG_RCU_FANOUT</tt> and +<tt>CONFIG_RCU_FANOUT_LEAF</tt> to be as small as 2, which would result +in a 16-CPU test using a 4-level tree. +This can be useful for testing large-system capabilities on small test +machines. </p><p>This multi-level combining tree allows us to get most of the performance and scalability @@ -154,44 +154,9 @@ on that root <tt>rcu_node</tt> structure remains acceptably low. keeping lock contention under control at all tree levels regardless of the level of loading on the system. -</p><p>The Linux kernel actually supports multiple flavors of RCU -running concurrently, so RCU builds separate data structures for each -flavor. -For example, for <tt>CONFIG_TREE_RCU=y</tt> kernels, RCU provides -rcu_sched and rcu_bh, as shown below: - -</p><p><img src="BigTreeClassicRCUBH.svg" alt="BigTreeClassicRCUBH.svg" width="33%"> - -</p><p>Energy efficiency is increasingly important, and for that -reason the Linux kernel provides <tt>CONFIG_NO_HZ_IDLE</tt>, which -turns off the scheduling-clock interrupts on idle CPUs, which in -turn allows those CPUs to attain deeper sleep states and to consume -less energy. -CPUs whose scheduling-clock interrupts have been turned off are -said to be in <i>dyntick-idle mode</i>. -RCU must handle dyntick-idle CPUs specially -because RCU would otherwise wake up each CPU on every grace period, -which would defeat the whole purpose of <tt>CONFIG_NO_HZ_IDLE</tt>. -RCU uses the <tt>rcu_dynticks</tt> structure to track -which CPUs are in dyntick idle mode, as shown below: - -</p><p><img src="BigTreeClassicRCUBHdyntick.svg" alt="BigTreeClassicRCUBHdyntick.svg" width="33%"> - -</p><p>However, if a CPU is in dyntick-idle mode, it is in that mode -for all flavors of RCU. -Therefore, a single <tt>rcu_dynticks</tt> structure is allocated per -CPU, and all of a given CPU's <tt>rcu_data</tt> structures share -that <tt>rcu_dynticks</tt>, as shown in the figure. - -</p><p>Kernels built with <tt>CONFIG_PREEMPT_RCU</tt> support -rcu_preempt in addition to rcu_sched and rcu_bh, as shown below: - -</p><p><img src="BigTreePreemptRCUBHdyntick.svg" alt="BigTreePreemptRCUBHdyntick.svg" width="35%"> - </p><p>RCU updaters wait for normal grace periods by registering RCU callbacks, either directly via <tt>call_rcu()</tt> and friends (namely <tt>call_rcu_bh()</tt> and <tt>call_rcu_sched()</tt>), -there being a separate interface per flavor of RCU) or indirectly via <tt>synchronize_rcu()</tt> and friends. RCU callbacks are represented by <tt>rcu_head</tt> structures, which are queued on <tt>rcu_data</tt> structures while they are @@ -214,9 +179,6 @@ its own synchronization: <li> Each <tt>rcu_node</tt> structure has a spinlock. <li> The fields in <tt>rcu_data</tt> are private to the corresponding CPU, although a few can be read and written by other CPUs. -<li> Similarly, the fields in <tt>rcu_dynticks</tt> are private - to the corresponding CPU, although a few can be read by - other CPUs. </ol> <p>It is important to note that different data structures can have @@ -272,11 +234,6 @@ follows: access to this information from the corresponding CPU. Finally, this structure records past dyntick-idle state for the corresponding CPU and also tracks statistics. -<li> <tt>rcu_dynticks</tt>: - This per-CPU structure tracks the current dyntick-idle - state for the corresponding CPU. - Unlike the other three structures, the <tt>rcu_dynticks</tt> - structure is not replicated per RCU flavor. <li> <tt>rcu_head</tt>: This structure represents RCU callbacks, and is the only structure allocated and managed by RCU users. @@ -287,14 +244,14 @@ follows: <p>If all you wanted from this article was a general notion of how RCU's data structures are related, you are done. Otherwise, each of the following sections give more details on -the <tt>rcu_state</tt>, <tt>rcu_node</tt>, <tt>rcu_data</tt>, -and <tt>rcu_dynticks</tt> data structures. +the <tt>rcu_state</tt>, <tt>rcu_node</tt> and <tt>rcu_data</tt> data +structures. <h3><a name="The rcu_state Structure"> The <tt>rcu_state</tt> Structure</a></h3> <p>The <tt>rcu_state</tt> structure is the base structure that -represents a flavor of RCU. +represents the state of RCU in the system. This structure forms the interconnection between the <tt>rcu_node</tt> and <tt>rcu_data</tt> structures, tracks grace periods, contains the lock used to @@ -389,7 +346,7 @@ sequence number. The bottom two bits are the state of the current grace period, which can be zero for not yet started or one for in progress. In other words, if the bottom two bits of <tt>->gp_seq</tt> are -zero, the corresponding flavor of RCU is idle. +zero, then RCU is idle. Any other value in the bottom two bits indicates that something is broken. This field is protected by the root <tt>rcu_node</tt> structure's <tt>->lock</tt> field. @@ -419,10 +376,10 @@ as follows: grace period in jiffies. It is protected by the root <tt>rcu_node</tt>'s <tt>->lock</tt>. -<p>The <tt>->name</tt> field points to the name of the RCU flavor -(for example, “rcu_sched”), and is constant. -The <tt>->abbr</tt> field contains a one-character abbreviation, -for example, “s” for RCU-sched. +<p>The <tt>->name</tt> and <tt>->abbr</tt> fields distinguish +between preemptible RCU (“rcu_preempt” and “p”) +and non-preemptible RCU (“rcu_sched” and “s”). +These fields are used for diagnostic and tracing purposes. <h3><a name="The rcu_node Structure"> The <tt>rcu_node</tt> Structure</a></h3> @@ -971,25 +928,31 @@ this <tt>rcu_segcblist</tt> structure, <i>not</i> the <tt>->head</tt> pointer. The reason for this is that all the ready-to-invoke callbacks (that is, those in the <tt>RCU_DONE_TAIL</tt> segment) are extracted -all at once at callback-invocation time. +all at once at callback-invocation time (<tt>rcu_do_batch</tt>), due +to which <tt>->head</tt> may be set to NULL if there are no not-done +callbacks remaining in the <tt>rcu_segcblist</tt>. If callback invocation must be postponed, for example, because a high-priority process just woke up on this CPU, then the remaining -callbacks are placed back on the <tt>RCU_DONE_TAIL</tt> segment. -Either way, the <tt>->len</tt> and <tt>->len_lazy</tt> counts -are adjusted after the corresponding callbacks have been invoked, and so -again it is the <tt>->len</tt> count that accurately reflects whether -or not there are callbacks associated with this <tt>rcu_segcblist</tt> -structure. +callbacks are placed back on the <tt>RCU_DONE_TAIL</tt> segment and +<tt>->head</tt> once again points to the start of the segment. +In short, the head field can briefly be <tt>NULL</tt> even though the +CPU has callbacks present the entire time. +Therefore, it is not appropriate to test the <tt>->head</tt> pointer +for <tt>NULL</tt>. + +<p>In contrast, the <tt>->len</tt> and <tt>->len_lazy</tt> counts +are adjusted only after the corresponding callbacks have been invoked. +This means that the <tt>->len</tt> count is zero only if +the <tt>rcu_segcblist</tt> structure really is devoid of callbacks. Of course, off-CPU sampling of the <tt>->len</tt> count requires -the use of appropriate synchronization, for example, memory barriers. +careful use of appropriate synchronization, for example, memory barriers. This synchronization can be a bit subtle, particularly in the case of <tt>rcu_barrier()</tt>. <h3><a name="The rcu_data Structure"> The <tt>rcu_data</tt> Structure</a></h3> -<p>The <tt>rcu_data</tt> maintains the per-CPU state for the -corresponding flavor of RCU. +<p>The <tt>rcu_data</tt> maintains the per-CPU state for the RCU subsystem. The fields in this structure may be accessed only from the corresponding CPU (and from tracing) unless otherwise stated. This structure is the @@ -1015,30 +978,19 @@ as follows: <pre> 1 int cpu; - 2 struct rcu_state *rsp; - 3 struct rcu_node *mynode; - 4 struct rcu_dynticks *dynticks; - 5 unsigned long grpmask; - 6 bool beenonline; + 2 struct rcu_node *mynode; + 3 unsigned long grpmask; + 4 bool beenonline; </pre> <p>The <tt>->cpu</tt> field contains the number of the -corresponding CPU, the <tt>->rsp</tt> pointer references -the corresponding <tt>rcu_state</tt> structure (and is most frequently -used to locate the name of the corresponding flavor of RCU for tracing), -and the <tt>->mynode</tt> field references the corresponding -<tt>rcu_node</tt> structure. +corresponding CPU and the <tt>->mynode</tt> field references the +corresponding <tt>rcu_node</tt> structure. The <tt>->mynode</tt> is used to propagate quiescent states up the combining tree. -<p>The <tt>->dynticks</tt> pointer references the -<tt>rcu_dynticks</tt> structure corresponding to this -CPU. -Recall that a single per-CPU instance of the <tt>rcu_dynticks</tt> -structure is shared among all flavors of RCU. -These first four fields are constant and therefore require not -synchronization. +These two fields are constant and therefore do not require synchronization. -</p><p>The <tt>->grpmask</tt> field indicates the bit in +<p>The <tt>->grpmask</tt> field indicates the bit in the <tt>->mynode->qsmask</tt> corresponding to this <tt>rcu_data</tt> structure, and is also used when propagating quiescent states. @@ -1057,12 +1009,12 @@ as follows: 3 bool cpu_no_qs; 4 bool core_needs_qs; 5 bool gpwrap; - 6 unsigned long rcu_qs_ctr_snap; </pre> -<p>The <tt>->gp_seq</tt> and <tt>->gp_seq_needed</tt> -fields are the counterparts of the fields of the same name -in the <tt>rcu_state</tt> and <tt>rcu_node</tt> structures. +<p>The <tt>->gp_seq</tt> field is the counterpart of the field of the same +name in the <tt>rcu_state</tt> and <tt>rcu_node</tt> structures. The +<tt>->gp_seq_needed</tt> field is the counterpart of the field of the same +name in the rcu_node</tt> structure. They may each lag up to one behind their <tt>rcu_node</tt> counterparts, but in <tt>CONFIG_NO_HZ_IDLE</tt> and <tt>CONFIG_NO_HZ_FULL</tt> kernels can lag @@ -1103,10 +1055,6 @@ CPU has remained idle for so long that the <tt>gp_seq</tt> counter is in danger of overflow, which will cause the CPU to disregard the values of its counters on its next exit from idle. -Finally, the <tt>rcu_qs_ctr_snap</tt> field is used to detect -cases where a given operation has resulted in a quiescent state -for all flavors of RCU, for example, <tt>cond_resched()</tt> -when RCU has indicated a need for quiescent states. <h5>RCU Callback Handling</h5> @@ -1179,26 +1127,22 @@ Finally, the <tt>->dynticks_fqs</tt> field is used to count the number of times this CPU is determined to be in dyntick-idle state, and is used for tracing and debugging purposes. -<h3><a name="The rcu_dynticks Structure"> -The <tt>rcu_dynticks</tt> Structure</a></h3> - -<p>The <tt>rcu_dynticks</tt> maintains the per-CPU dyntick-idle state -for the corresponding CPU. -Unlike the other structures, <tt>rcu_dynticks</tt> is not -replicated over the different flavors of RCU. -The fields in this structure may be accessed only from the corresponding -CPU (and from tracing) unless otherwise stated. -Its fields are as follows: +<p> +This portion of the rcu_data structure is declared as follows: <pre> 1 long dynticks_nesting; 2 long dynticks_nmi_nesting; 3 atomic_t dynticks; 4 bool rcu_need_heavy_qs; - 5 unsigned long rcu_qs_ctr; - 6 bool rcu_urgent_qs; + 5 bool rcu_urgent_qs; </pre> +<p>These fields in the rcu_data structure maintain the per-CPU dyntick-idle +state for the corresponding CPU. +The fields may be accessed only from the corresponding CPU (and from tracing) +unless otherwise stated. + <p>The <tt>->dynticks_nesting</tt> field counts the nesting depth of process execution, so that in normal circumstances this counter has value zero or one. @@ -1240,19 +1184,12 @@ it is willing to call for heavy-weight dyntick-counter operations. This flag is checked by RCU's context-switch and <tt>cond_resched()</tt> code, which provide a momentary idle sojourn in response. -</p><p>The <tt>->rcu_qs_ctr</tt> field is used to record -quiescent states from <tt>cond_resched()</tt>. -Because <tt>cond_resched()</tt> can execute quite frequently, this -must be quite lightweight, as in a non-atomic increment of this -per-CPU field. - </p><p>Finally, the <tt>->rcu_urgent_qs</tt> field is used to record -the fact that the RCU core code would really like to see a quiescent -state from the corresponding CPU, with the various other fields indicating -just how badly RCU wants this quiescent state. -This flag is checked by RCU's context-switch and <tt>cond_resched()</tt> -code, which, if nothing else, non-atomically increment <tt>->rcu_qs_ctr</tt> -in response. +the fact that the RCU core code would really like to see a quiescent state from +the corresponding CPU, with the various other fields indicating just how badly +RCU wants this quiescent state. +This flag is checked by RCU's context-switch path +(<tt>rcu_note_context_switch</tt>) and the cond_resched code. <table> <tr><th> </th></tr> @@ -1425,11 +1362,11 @@ the last part of the array, thus traversing only the leaf <h3><a name="Summary"> Summary</a></h3> -So each flavor of RCU is represented by an <tt>rcu_state</tt> structure, +So the state of RCU is represented by an <tt>rcu_state</tt> structure, which contains a combining tree of <tt>rcu_node</tt> and <tt>rcu_data</tt> structures. Finally, in <tt>CONFIG_NO_HZ_IDLE</tt> kernels, each CPU's dyntick-idle -state is tracked by an <tt>rcu_dynticks</tt> structure. +state is tracked by dynticks-related fields in the <tt>rcu_data</tt> structure. If you made it this far, you are well prepared to read the code walkthroughs in the other articles in this series. diff --git a/Documentation/RCU/Design/Data-Structures/blkd_task.svg b/Documentation/RCU/Design/Data-Structures/blkd_task.svg index 00e810bb8419..bed13e9ecab8 100644 --- a/Documentation/RCU/Design/Data-Structures/blkd_task.svg +++ b/Documentation/RCU/Design/Data-Structures/blkd_task.svg @@ -14,12 +14,12 @@ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" width="10.1in" - height="8.6in" - viewBox="-44 -44 12088 10288" + height="6.5999999in" + viewBox="-44 -44 12088 7895.4414" id="svg2" version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="blkd_task.fig"> + inkscape:version="0.92.2pre0 (973e216, 2017-07-25)" + sodipodi:docname="blkd_task.svg"> <metadata id="metadata212"> <rdf:RDF> @@ -37,15 +37,16 @@ <marker inkscape:stockid="Arrow1Mend" orient="auto" - refY="0.0" - refX="0.0" + refY="0" + refX="0" id="Arrow1Mend" - style="overflow:visible;"> + style="overflow:visible"> <path id="path3970" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> </marker> </defs> <sodipodi:namedview @@ -57,787 +58,574 @@ guidetolerance="10" inkscape:pageopacity="0" inkscape:pageshadow="2" - inkscape:window-width="1087" - inkscape:window-height="1144" + inkscape:window-width="1920" + inkscape:window-height="1019" id="namedview208" showgrid="false" inkscape:zoom="1.0495049" - inkscape:cx="454.50003" - inkscape:cy="387.00003" - inkscape:window-x="833" - inkscape:window-y="28" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> + inkscape:cx="456.40569" + inkscape:cy="348.88682" + inkscape:window-x="0" + inkscape:window-y="0" + inkscape:window-maximized="1" + inkscape:current-layer="g4" + showguides="false" /> <g - style="stroke-width:.025in; fill:none" - id="g4"> + style="fill:none;stroke-width:0.025in" + id="g4" + transform="translate(0,-2393.6637)"> <!-- Line: box --> - <rect - x="450" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> <!-- Line: box --> - <rect - x="4950" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect8" /> <!-- Line: box --> - <rect - x="750" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect10" /> <!-- Line --> - <polyline - points="5250,8100 5688,5912 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline12" /> <!-- Arrowhead on XXXpoint 5250 8100 - 5710 5790--> <polyline points="5714 6068 5704 5822 5598 6044 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline14" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline14" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> - <polyline - points="4050,9300 4486,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline16" /> <!-- Arrowhead on XXXpoint 4050 9300 - 4512 7140--> <polyline points="4514 7418 4506 7172 4396 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline18" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline18" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> - <polyline - points="1040,9300 1476,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline20" /> <!-- Arrowhead on XXXpoint 1040 9300 - 1502 7140--> <polyline points="1504 7418 1496 7172 1386 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline22" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline22" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> - <polyline - points="2240,8100 2676,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline24" /> <!-- Arrowhead on XXXpoint 2240 8100 - 2702 5940--> <polyline points="2704 6218 2696 5972 2586 6194 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline26" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline26" + transform="translate(23.757862,2185.7233)" /> <!-- Line: box --> <rect - x="0" - y="450" + x="23.757858" + y="2635.7231" width="6300" height="7350" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + style="fill:#ffffff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect28" /> <!-- Line: box --> <rect - x="300" - y="1050" + x="323.75787" + y="3235.7231" width="5700" height="3750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + style="fill:#ffff00;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect30" /> <!-- Line --> <polyline points="1350,3450 2350,2590 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline32" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline32" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> <!-- Line --> <polyline points="4950,3450 3948,2590 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline36" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline36" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> <!-- Line --> <polyline points="4050,6600 4050,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline40" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline40" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> <!-- Line --> <polyline points="1050,6600 1050,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline44" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline44" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> <!-- Line --> <polyline points="2250,5400 2250,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline48" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline48" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> <!-- Line --> - <polyline - points="2250,8100 2250,6364 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline52" /> <!-- Arrowhead on XXXpoint 2250 8100 - 2250 6240--> <!-- Line --> - <polyline - points="1050,9300 1050,7564 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline56" /> <!-- Arrowhead on XXXpoint 1050 9300 - 1050 7440--> <!-- Line --> - <polyline - points="4050,9300 4050,7564 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline60" /> <!-- Arrowhead on XXXpoint 4050 9300 - 4050 7440--> <!-- Line --> - <polyline - points="5250,8100 5250,6364 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline64" /> <!-- Arrowhead on XXXpoint 5250 8100 - 5250 6240--> <!-- Circle --> <circle - cx="2850" - cy="3900" + cx="2873.7581" + cy="6085.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle68" /> <!-- Circle --> <circle - cx="3150" - cy="3900" + cx="3173.7581" + cy="6085.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle70" /> <!-- Circle --> <circle - cx="3450" - cy="3900" + cx="3473.7581" + cy="6085.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle72" /> <!-- Circle --> <circle - cx="1350" - cy="5100" + cx="1373.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle74" /> <!-- Circle --> <circle - cx="1650" - cy="5100" + cx="1673.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle76" /> <!-- Circle --> <circle - cx="1950" - cy="5100" + cx="1973.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle78" /> <!-- Circle --> <circle - cx="4350" - cy="5100" + cx="4373.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle80" /> <!-- Circle --> <circle - cx="4650" - cy="5100" + cx="4673.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle82" /> <!-- Circle --> <circle - cx="4950" - cy="5100" + cx="4973.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle84" /> <!-- Line: box --> <rect - x="750" - y="3450" + x="773.75781" + y="5635.7236" width="1800" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect86" /> <!-- Line: box --> <rect - x="300" - y="6600" + x="323.75787" + y="8785.7227" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect88" /> <!-- Line: box --> <rect - x="4500" - y="5400" + x="4523.7578" + y="7585.7236" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect90" /> <!-- Line: box --> <rect - x="3300" - y="6600" + x="3323.7581" + y="8785.7227" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect92" /> <!-- Line: box --> <rect - x="2250" - y="1650" + x="2273.7581" + y="3835.7231" width="1800" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect94" /> <!-- Line: box --> - <rect - x="0" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect96" /> <!-- Line: box --> - <rect - x="1350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect98" /> <!-- Line: box --> - <rect - x="3000" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect100" /> <!-- Line: box --> - <rect - x="4350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect102" /> <!-- Line: box --> <rect - x="1500" - y="5400" + x="1523.7578" + y="7585.7236" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect104" /> <!-- Line --> <polygon - points="5550,3450 7350,2850 7350,5100 5550,4350 5550,3450 " - style="stroke:#000000;stroke-width:14; stroke-linejoin:miter; stroke-linecap:butt; stroke-dasharray:120 120;fill:#ffbfbf; " - id="polygon106" /> + points="7350,2850 7350,5100 5550,4350 5550,3450 " + style="fill:#ffbfbf;stroke:#000000;stroke-width:14;stroke-linecap:butt;stroke-linejoin:miter;stroke-dasharray:120, 120" + id="polygon106" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> <polyline points="9300,3150 10734,3150 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline108" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline108" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 9300 3150 - 10860 3150--> <!-- Line: box --> <rect - x="10800" - y="2850" + x="10823.758" + y="5035.7236" width="1200" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect112" /> <!-- Line --> <polyline points="11400,3600 11400,4284 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline114" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline114" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 11400 3600 - 11400 4410--> <!-- Line: box --> <rect - x="10800" - y="4350" + x="10823.758" + y="6535.7236" width="1200" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect118" /> <!-- Line --> <polyline points="11400,5100 11400,5784 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline120" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline120" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 11400 5100 - 11400 5910--> <!-- Line: box --> <rect - x="10800" - y="5850" + x="10823.758" + y="8035.7236" width="1200" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect124" /> <!-- Line --> <polyline points="9300,3900 9900,3900 9900,4650 10734,4650 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline126" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline126" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 9900 4650 - 10860 4650--> <!-- Line --> <polyline points="9300,4650 9600,4650 9600,6150 10734,6150 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline130" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline130" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 9600 6150 - 10860 6150--> <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text134">rcu_bh</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="1950" - fill="#000000" - font-family="Courier" + x="3173.7581" + y="4135.7231" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text136">struct</text> + id="text136" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="2250" - fill="#000000" - font-family="Courier" + x="3173.7581" + y="4435.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text138">rcu_node</text> + id="text138" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="3750" - fill="#000000" - font-family="Courier" + x="1673.7578" + y="5935.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text140">struct</text> + id="text140" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="4050" - fill="#000000" - font-family="Courier" + x="1673.7578" + y="6235.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text142">rcu_node</text> + id="text142" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="5700" - fill="#000000" - font-family="Courier" + x="2273.7581" + y="7885.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text144">struct</text> + id="text144" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="6000" - fill="#000000" - font-family="Courier" + x="2273.7581" + y="8185.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text146">rcu_data</text> + id="text146" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="6900" - fill="#000000" - font-family="Courier" + x="1073.7578" + y="9085.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text148">struct</text> + id="text148" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="7200" - fill="#000000" - font-family="Courier" + x="1073.7578" + y="9385.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text150">rcu_data</text> + id="text150" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="5700" - fill="#000000" - font-family="Courier" + x="5273.7578" + y="7885.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text152">struct</text> + id="text152" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="6000" - fill="#000000" - font-family="Courier" + x="5273.7578" + y="8185.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text154">rcu_data</text> + id="text154" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="6900" - fill="#000000" - font-family="Courier" + x="4073.7578" + y="9085.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text156">struct</text> + id="text156" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="7200" - fill="#000000" - font-family="Courier" + x="4073.7578" + y="9385.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text158">rcu_data</text> + id="text158" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="450" - y="1350" - fill="#000000" - font-family="Courier" + x="473.75784" + y="3535.7231" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text160">struct rcu_state</text> + id="text160" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">struct rcu_state</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text162">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text164">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text166">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text168">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text170">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text172">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text174">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text176">rcu_dynticks</text> <!-- Text --> <text xml:space="preserve" - x="6000" - y="750" - fill="#000000" - font-family="Helvetica" + x="6023.7578" + y="2935.7231" font-style="normal" font-weight="normal" font-size="192" - text-anchor="end" - id="text178">rcu_sched</text> + id="text178" + style="font-style:normal;font-weight:normal;font-size:192px;font-family:Helvetica;text-anchor:end;fill:#000000">rcu_state</text> <!-- Text --> <text xml:space="preserve" - x="11400" - y="3300" - fill="#000000" - font-family="Helvetica" + x="11423.758" + y="5485.7236" font-style="normal" font-weight="normal" font-size="216" - text-anchor="middle" - id="text180">T3</text> + id="text180" + style="font-style:normal;font-weight:normal;font-size:216px;font-family:Helvetica;text-anchor:middle;fill:#000000">T3</text> <!-- Text --> <text xml:space="preserve" - x="11400" - y="4800" - fill="#000000" - font-family="Helvetica" + x="11423.758" + y="6985.7236" font-style="normal" font-weight="normal" font-size="216" - text-anchor="middle" - id="text182">T2</text> + id="text182" + style="font-style:normal;font-weight:normal;font-size:216px;font-family:Helvetica;text-anchor:middle;fill:#000000">T2</text> <!-- Text --> <text xml:space="preserve" - x="11400" - y="6300" - fill="#000000" - font-family="Helvetica" + x="11423.758" + y="8485.7227" font-style="normal" font-weight="normal" font-size="216" - text-anchor="middle" - id="text184">T1</text> + id="text184" + style="font-style:normal;font-weight:normal;font-size:216px;font-family:Helvetica;text-anchor:middle;fill:#000000">T1</text> <!-- Line --> <polyline points="5250,5400 5250,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline186" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline186" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> <!-- Line: box --> <rect - x="3750" - y="3450" + x="3773.7581" + y="5635.7236" width="1800" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect190" /> <!-- Line: box --> <rect - x="7350" - y="2850" + x="7373.7578" + y="5035.7236" width="1950" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect192" /> <!-- Line: box --> <rect - x="7350" - y="3600" + x="7373.7578" + y="5785.7236" width="1950" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect194" /> <!-- Line: box --> <rect - x="7350" - y="4350" + x="7373.7578" + y="6535.7236" width="1950" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect196" /> <!-- Text --> <text xml:space="preserve" - x="4650" - y="4050" - fill="#000000" - font-family="Courier" + x="4673.7578" + y="6235.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text198">rcu_node</text> + id="text198" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="4650" - y="3750" - fill="#000000" - font-family="Courier" + x="4673.7578" + y="5935.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text200">struct</text> + id="text200" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="7500" - y="3300" - fill="#000000" - font-family="Courier" + x="7523.7578" + y="5485.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text202">blkd_tasks</text> + id="text202" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">blkd_tasks</text> <!-- Text --> <text xml:space="preserve" - x="7500" - y="4050" - fill="#000000" - font-family="Courier" + x="7523.7578" + y="6235.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text204">gp_tasks</text> + id="text204" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">gp_tasks</text> <!-- Text --> <text xml:space="preserve" - x="7500" - y="4800" - fill="#000000" - font-family="Courier" + x="7523.7578" + y="6985.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text206">exp_tasks</text> + id="text206" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">exp_tasks</text> </g> </svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html index e62c7c34a369..8e4f873b979f 100644 --- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html @@ -160,9 +160,9 @@ was in flight. If the CPU is idle, then <tt>sync_sched_exp_handler()</tt> reports the quiescent state. -<p> -Otherwise, the handler invokes <tt>resched_cpu()</tt>, which forces -a future context switch. +<p> Otherwise, the handler forces a future context switch by setting the +NEED_RESCHED flag of the current task's thread flag and the CPU preempt +counter. At the time of the context switch, the CPU reports the quiescent state. Should the CPU go offline first, it will report the quiescent state at that time. diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html index a346ce0116eb..e4d94fba6c89 100644 --- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html +++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html @@ -77,7 +77,7 @@ The key point is that the lock-acquisition functions, including <tt>smp_mb__after_unlock_lock()</tt> immediately after successful acquisition of the lock. -<p>Therefore, for any given <tt>rcu_node</tt> struction, any access +<p>Therefore, for any given <tt>rcu_node</tt> structure, any access happening before one of the above lock-release functions will be seen by all CPUs as happening before any access happening after a later one of the above lock-acquisition functions. diff --git a/Documentation/RCU/Design/Requirements/Requirements.html b/Documentation/RCU/Design/Requirements/Requirements.html index 43c4e2f05f40..9fca73e03a98 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.html +++ b/Documentation/RCU/Design/Requirements/Requirements.html @@ -900,8 +900,6 @@ Except where otherwise noted, these non-guarantees were premeditated. Grace Periods Don't Partition Read-Side Critical Sections</a> <li> <a href="#Read-Side Critical Sections Don't Partition Grace Periods"> Read-Side Critical Sections Don't Partition Grace Periods</a> -<li> <a href="#Disabling Preemption Does Not Block Grace Periods"> - Disabling Preemption Does Not Block Grace Periods</a> </ol> <h3><a name="Readers Impose Minimal Ordering">Readers Impose Minimal Ordering</a></h3> @@ -1259,54 +1257,6 @@ of RCU grace periods. <tr><td> </td></tr> </table> -<h3><a name="Disabling Preemption Does Not Block Grace Periods"> -Disabling Preemption Does Not Block Grace Periods</a></h3> - -<p> -There was a time when disabling preemption on any given CPU would block -subsequent grace periods. -However, this was an accident of implementation and is not a requirement. -And in the current Linux-kernel implementation, disabling preemption -on a given CPU in fact does not block grace periods, as Oleg Nesterov -<a href="https://lkml.kernel.org/g/20150614193825.GA19582@redhat.com">demonstrated</a>. - -<p> -If you need a preempt-disable region to block grace periods, you need to add -<tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt>, for example -as follows: - -<blockquote> -<pre> - 1 preempt_disable(); - 2 rcu_read_lock(); - 3 do_something(); - 4 rcu_read_unlock(); - 5 preempt_enable(); - 6 - 7 /* Spinlocks implicitly disable preemption. */ - 8 spin_lock(&mylock); - 9 rcu_read_lock(); -10 do_something(); -11 rcu_read_unlock(); -12 spin_unlock(&mylock); -</pre> -</blockquote> - -<p> -In theory, you could enter the RCU read-side critical section first, -but it is more efficient to keep the entire RCU read-side critical -section contained in the preempt-disable region as shown above. -Of course, RCU read-side critical sections that extend outside of -preempt-disable regions will work correctly, but such critical sections -can be preempted, which forces <tt>rcu_read_unlock()</tt> to do -more work. -And no, this is <i>not</i> an invitation to enclose all of your RCU -read-side critical sections within preempt-disable regions, because -doing so would degrade real-time response. - -<p> -This non-requirement appeared with preemptible RCU. - <h2><a name="Parallelism Facts of Life">Parallelism Facts of Life</a></h2> <p> @@ -1381,6 +1331,7 @@ Classes of quality-of-implementation requirements are as follows: <ol> <li> <a href="#Specialization">Specialization</a> <li> <a href="#Performance and Scalability">Performance and Scalability</a> +<li> <a href="#Forward Progress">Forward Progress</a> <li> <a href="#Composability">Composability</a> <li> <a href="#Corner Cases">Corner Cases</a> </ol> @@ -1645,7 +1596,7 @@ used in place of <tt>synchronize_rcu()</tt> as follows: 16 struct foo *p; 17 18 spin_lock(&gp_lock); -19 p = rcu_dereference(gp); +19 p = rcu_access_pointer(gp); 20 if (!p) { 21 spin_unlock(&gp_lock); 22 return false; @@ -1822,6 +1773,106 @@ so it is too early to tell whether they will stand the test of time. RCU thus provides a range of tools to allow updaters to strike the required tradeoff between latency, flexibility and CPU overhead. +<h3><a name="Forward Progress">Forward Progress</a></h3> + +<p> +In theory, delaying grace-period completion and callback invocation +is harmless. +In practice, not only are memory sizes finite but also callbacks sometimes +do wakeups, and sufficiently deferred wakeups can be difficult +to distinguish from system hangs. +Therefore, RCU must provide a number of mechanisms to promote forward +progress. + +<p> +These mechanisms are not foolproof, nor can they be. +For one simple example, an infinite loop in an RCU read-side critical +section must by definition prevent later grace periods from ever completing. +For a more involved example, consider a 64-CPU system built with +<tt>CONFIG_RCU_NOCB_CPU=y</tt> and booted with <tt>rcu_nocbs=1-63</tt>, +where CPUs 1 through 63 spin in tight loops that invoke +<tt>call_rcu()</tt>. +Even if these tight loops also contain calls to <tt>cond_resched()</tt> +(thus allowing grace periods to complete), CPU 0 simply will +not be able to invoke callbacks as fast as the other 63 CPUs can +register them, at least not until the system runs out of memory. +In both of these examples, the Spiderman principle applies: With great +power comes great responsibility. +However, short of this level of abuse, RCU is required to +ensure timely completion of grace periods and timely invocation of +callbacks. + +<p> +RCU takes the following steps to encourage timely completion of +grace periods: + +<ol> +<li> If a grace period fails to complete within 100 milliseconds, + RCU causes future invocations of <tt>cond_resched()</tt> on + the holdout CPUs to provide an RCU quiescent state. + RCU also causes those CPUs' <tt>need_resched()</tt> invocations + to return <tt>true</tt>, but only after the corresponding CPU's + next scheduling-clock. +<li> CPUs mentioned in the <tt>nohz_full</tt> kernel boot parameter + can run indefinitely in the kernel without scheduling-clock + interrupts, which defeats the above <tt>need_resched()</tt> + strategem. + RCU will therefore invoke <tt>resched_cpu()</tt> on any + <tt>nohz_full</tt> CPUs still holding out after + 109 milliseconds. +<li> In kernels built with <tt>CONFIG_RCU_BOOST=y</tt>, if a given + task that has been preempted within an RCU read-side critical + section is holding out for more than 500 milliseconds, + RCU will resort to priority boosting. +<li> If a CPU is still holding out 10 seconds into the grace + period, RCU will invoke <tt>resched_cpu()</tt> on it regardless + of its <tt>nohz_full</tt> state. +</ol> + +<p> +The above values are defaults for systems running with <tt>HZ=1000</tt>. +They will vary as the value of <tt>HZ</tt> varies, and can also be +changed using the relevant Kconfig options and kernel boot parameters. +RCU currently does not do much sanity checking of these +parameters, so please use caution when changing them. +Note that these forward-progress measures are provided only for RCU, +not for +<a href="#Sleepable RCU">SRCU</a> or +<a href="#Tasks RCU">Tasks RCU</a>. + +<p> +RCU takes the following steps in <tt>call_rcu()</tt> to encourage timely +invocation of callbacks when any given non-<tt>rcu_nocbs</tt> CPU has +10,000 callbacks, or has 10,000 more callbacks than it had the last time +encouragement was provided: + +<ol> +<li> Starts a grace period, if one is not already in progress. +<li> Forces immediate checking for quiescent states, rather than + waiting for three milliseconds to have elapsed since the + beginning of the grace period. +<li> Immediately tags the CPU's callbacks with their grace period + completion numbers, rather than waiting for the <tt>RCU_SOFTIRQ</tt> + handler to get around to it. +<li> Lifts callback-execution batch limits, which speeds up callback + invocation at the expense of degrading realtime response. +</ol> + +<p> +Again, these are default values when running at <tt>HZ=1000</tt>, +and can be overridden. +Again, these forward-progress measures are provided only for RCU, +not for +<a href="#Sleepable RCU">SRCU</a> or +<a href="#Tasks RCU">Tasks RCU</a>. +Even for RCU, callback-invocation forward progress for <tt>rcu_nocbs</tt> +CPUs is much less well-developed, in part because workloads benefiting +from <tt>rcu_nocbs</tt> CPUs tend to invoke <tt>call_rcu()</tt> +relatively infrequently. +If workloads emerge that need both <tt>rcu_nocbs</tt> CPUs and high +<tt>call_rcu()</tt> invocation rates, then additional forward-progress +work will be required. + <h3><a name="Composability">Composability</a></h3> <p> @@ -2272,7 +2323,7 @@ that meets this requirement. Furthermore, NMI handlers can be interrupted by what appear to RCU to be normal interrupts. One way that this can happen is for code that directly invokes -<tt>rcu_irq_enter()</tt> and </tt>rcu_irq_exit()</tt> to be called +<tt>rcu_irq_enter()</tt> and <tt>rcu_irq_exit()</tt> to be called from an NMI handler. This astonishing fact of life prompted the current code structure, which has <tt>rcu_irq_enter()</tt> invoking <tt>rcu_nmi_enter()</tt> @@ -2294,7 +2345,7 @@ via <tt>del_timer_sync()</tt> or similar. <p> Unfortunately, there is no way to cancel an RCU callback; once you invoke <tt>call_rcu()</tt>, the callback function is -going to eventually be invoked, unless the system goes down first. +eventually going to be invoked, unless the system goes down first. Because it is normally considered socially irresponsible to crash the system in response to a module unload request, we need some other way to deal with in-flight RCU callbacks. @@ -2424,23 +2475,37 @@ for context-switch-heavy <tt>CONFIG_NO_HZ_FULL=y</tt> workloads, but there is room for further improvement. <p> -In the past, it was forbidden to disable interrupts across an -<tt>rcu_read_unlock()</tt> unless that interrupt-disabled region -of code also included the matching <tt>rcu_read_lock()</tt>. -Violating this restriction could result in deadlocks involving the -scheduler's runqueue and priority-inheritance spinlocks. -This restriction was lifted when interrupt-disabled calls to -<tt>rcu_read_unlock()</tt> started deferring the reporting of -the resulting RCU-preempt quiescent state until the end of that +It is forbidden to hold any of scheduler's runqueue or priority-inheritance +spinlocks across an <tt>rcu_read_unlock()</tt> unless interrupts have been +disabled across the entire RCU read-side critical section, that is, +up to and including the matching <tt>rcu_read_lock()</tt>. +Violating this restriction can result in deadlocks involving these +scheduler spinlocks. +There was hope that this restriction might be lifted when interrupt-disabled +calls to <tt>rcu_read_unlock()</tt> started deferring the reporting of +the resulting RCU-preempt quiescent state until the end of the corresponding interrupts-disabled region. -This deferred reporting means that the scheduler's runqueue and -priority-inheritance locks cannot be held while reporting an RCU-preempt -quiescent state, which lifts the earlier restriction, at least from -a deadlock perspective. -Unfortunately, real-time systems using RCU priority boosting may +Unfortunately, timely reporting of the corresponding quiescent state +to expedited grace periods requires a call to <tt>raise_softirq()</tt>, +which can acquire these scheduler spinlocks. +In addition, real-time systems using RCU priority boosting need this restriction to remain in effect because deferred -quiescent-state reporting also defers deboosting, which in turn -degrades real-time latencies. +quiescent-state reporting would also defer deboosting, which in turn +would degrade real-time latencies. + +<p> +In theory, if a given RCU read-side critical section could be +guaranteed to be less than one second in duration, holding a scheduler +spinlock across that critical section's <tt>rcu_read_unlock()</tt> +would require only that preemption be disabled across the entire +RCU read-side critical section, not interrupts. +Unfortunately, given the possibility of vCPU preemption, long-running +interrupts, and so on, it is not possible in practice to guarantee +that a given RCU read-side critical section will complete in less than +one second. +Therefore, as noted above, if scheduler spinlocks are held across +a given call to <tt>rcu_read_unlock()</tt>, interrupts must be +disabled across the entire RCU read-side critical section. <h3><a name="Tracing and RCU">Tracing and RCU</a></h3> @@ -3233,6 +3298,11 @@ For example, RCU callback overhead might be charged back to the originating <tt>call_rcu()</tt> instance, though probably not in production kernels. +<p> +Additional work may be required to provide reasonable forward-progress +guarantees under heavy load for grace periods and for callback +invocation. + <h2><a name="Summary">Summary</a></h2> <p> diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 49747717d905..6f469864d9f5 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -63,7 +63,7 @@ over a rather long period of time, but improvements are always welcome! pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(), rcu_read_lock_sched(), or by the appropriate update-side lock. Disabling of preemption can serve as rcu_read_lock_sched(), but - is less readable. + is less readable and prevents lockdep from detecting locking issues. Letting RCU-protected pointers "leak" out of an RCU read-side critical section is every bid as bad as letting them leak out @@ -285,11 +285,7 @@ over a rather long period of time, but improvements are always welcome! here is that superuser already has lots of ways to crash the machine. - d. Use call_rcu_bh() rather than call_rcu(), in order to take - advantage of call_rcu_bh()'s faster grace periods. (This - is only a partial solution, though.) - - e. Periodically invoke synchronize_rcu(), permitting a limited + d. Periodically invoke synchronize_rcu(), permitting a limited number of updates per grace period. The same cautions apply to call_rcu_bh(), call_rcu_sched(), @@ -324,37 +320,14 @@ over a rather long period of time, but improvements are always welcome! will break Alpha, cause aggressive compilers to generate bad code, and confuse people trying to read your code. -11. Note that synchronize_rcu() -only- guarantees to wait until - all currently executing rcu_read_lock()-protected RCU read-side - critical sections complete. It does -not- necessarily guarantee - that all currently running interrupts, NMIs, preempt_disable() - code, or idle loops will complete. Therefore, if your - read-side critical sections are protected by something other - than rcu_read_lock(), do -not- use synchronize_rcu(). - - Similarly, disabling preemption is not an acceptable substitute - for rcu_read_lock(). Code that attempts to use preemption - disabling where it should be using rcu_read_lock() will break - in CONFIG_PREEMPT=y kernel builds. - - If you want to wait for interrupt handlers, NMI handlers, and - code under the influence of preempt_disable(), you instead - need to use synchronize_irq() or synchronize_sched(). - - This same limitation also applies to synchronize_rcu_bh() - and synchronize_srcu(), as well as to the asynchronous and - expedited forms of the three primitives, namely call_rcu(), - call_rcu_bh(), call_srcu(), synchronize_rcu_expedited(), - synchronize_rcu_bh_expedited(), and synchronize_srcu_expedited(). - -12. Any lock acquired by an RCU callback must be acquired elsewhere +11. Any lock acquired by an RCU callback must be acquired elsewhere with softirq disabled, e.g., via spin_lock_irqsave(), spin_lock_bh(), etc. Failing to disable irq on a given acquisition of that lock will result in deadlock as soon as the RCU softirq handler happens to run your RCU callback while interrupting that acquisition's critical section. -13. RCU callbacks can be and are executed in parallel. In many cases, +12. RCU callbacks can be and are executed in parallel. In many cases, the callback code simply wrappers around kfree(), so that this is not an issue (or, more accurately, to the extent that it is an issue, the memory-allocator locking handles it). However, @@ -370,7 +343,7 @@ over a rather long period of time, but improvements are always welcome! not the case, a self-spawning RCU callback would prevent the victim CPU from ever going offline.) -14. Unlike other forms of RCU, it -is- permissible to block in an +13. Unlike other forms of RCU, it -is- permissible to block in an SRCU read-side critical section (demarked by srcu_read_lock() and srcu_read_unlock()), hence the "SRCU": "sleepable RCU". Please note that if you don't need to sleep in read-side critical @@ -414,7 +387,7 @@ over a rather long period of time, but improvements are always welcome! Note that rcu_dereference() and rcu_assign_pointer() relate to SRCU just as they do to other forms of RCU. -15. The whole point of call_rcu(), synchronize_rcu(), and friends +14. The whole point of call_rcu(), synchronize_rcu(), and friends is to wait until all pre-existing readers have finished before carrying out some otherwise-destructive operation. It is therefore critically important to -first- remove any path @@ -426,13 +399,13 @@ over a rather long period of time, but improvements are always welcome! is the caller's responsibility to guarantee that any subsequent readers will execute safely. -16. The various RCU read-side primitives do -not- necessarily contain +15. The various RCU read-side primitives do -not- necessarily contain memory barriers. You should therefore plan for the CPU and the compiler to freely reorder code into and out of RCU read-side critical sections. It is the responsibility of the RCU update-side primitives to deal with this. -17. Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the +16. Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the __rcu sparse checks to validate your RCU code. These can help find problems as follows: @@ -455,7 +428,7 @@ over a rather long period of time, but improvements are always welcome! These debugging aids can help you find problems that are otherwise extremely difficult to spot. -18. If you register a callback using call_rcu(), call_rcu_bh(), +17. If you register a callback using call_rcu(), call_rcu_bh(), call_rcu_sched(), or call_srcu(), and pass in a function defined within a loadable module, then it in necessary to wait for all pending callbacks to be invoked after the last invocation @@ -469,8 +442,8 @@ over a rather long period of time, but improvements are always welcome! You instead need to use one of the barrier functions: o call_rcu() -> rcu_barrier() - o call_rcu_bh() -> rcu_barrier_bh() - o call_rcu_sched() -> rcu_barrier_sched() + o call_rcu_bh() -> rcu_barrier() + o call_rcu_sched() -> rcu_barrier() o call_srcu() -> srcu_barrier() However, these barrier functions are absolutely -not- guaranteed diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 491043fd976f..073dbc12d1ea 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -176,9 +176,8 @@ causing stalls, and that the stall was affecting RCU-sched. This message will normally be followed by stack dumps for each CPU. Please note that PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, and that the tasks will be indicated by PID, for example, "P3421". It is even -possible for a rcu_preempt_state stall to be caused by both CPUs -and- -tasks, in which case the offending CPUs and tasks will all be called -out in the list. +possible for an rcu_state stall to be caused by both CPUs -and- tasks, +in which case the offending CPUs and tasks will all be called out in the list. CPU 2's "(3 GPs behind)" indicates that this CPU has not interacted with the RCU core for the past three grace periods. In contrast, CPU 16's "(0 @@ -206,7 +205,7 @@ handlers are no longer able to execute on this CPU. This can happen if the stalled CPU is spinning with interrupts are disabled, or, in -rt kernels, if a high-priority process is starving RCU's softirq handler. -The "fps=" shows the number of force-quiescent-state idle/offline +The "fqs=" shows the number of force-quiescent-state idle/offline detection passes that the grace-period kthread has made across this CPU since the last time that this CPU noted the beginning of a grace period. diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 86d82f7f3500..4a6854318b17 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -266,7 +266,7 @@ rcu_dereference() unnecessary overhead on Alpha CPUs. Note that the value returned by rcu_dereference() is valid - only within the enclosing RCU read-side critical section. + only within the enclosing RCU read-side critical section [1]. For example, the following is -not- legal: rcu_read_lock(); @@ -292,6 +292,19 @@ rcu_dereference() typically used indirectly, via the _rcu list-manipulation primitives, such as list_for_each_entry_rcu(). + [1] The variant rcu_dereference_protected() can be used outside + of an RCU read-side critical section as long as the usage is + protected by locks acquired by the update-side code. This variant + avoids the lockdep warning that would happen when using (for + example) rcu_dereference() without rcu_read_lock() protection. + Using rcu_dereference_protected() also has the advantage + of permitting compiler optimizations that rcu_dereference() + must prohibit. The rcu_dereference_protected() variant takes + a lockdep expression to indicate which locks must be acquired + by the caller. If the indicated protection is not provided, + a lockdep splat is emitted. See RCU/Design/Requirements.html + and the API's code comments for more details and example usage. + The following diagram shows how each API communicates among the reader, updater, and reclaimer. @@ -322,28 +335,27 @@ to their callers and (2) call_rcu() callbacks may be invoked. Efficient implementations of the RCU infrastructure make heavy use of batching in order to amortize their overhead over many uses of the corresponding APIs. -There are no fewer than three RCU mechanisms in the Linux kernel; the -diagram above shows the first one, which is by far the most commonly used. -The rcu_dereference() and rcu_assign_pointer() primitives are used for -all three mechanisms, but different defer and protect primitives are -used as follows: - - Defer Protect +There are at least three flavors of RCU usage in the Linux kernel. The diagram +above shows the most common one. On the updater side, the rcu_assign_pointer(), +sychronize_rcu() and call_rcu() primitives used are the same for all three +flavors. However for protection (on the reader side), the primitives used vary +depending on the flavor: -a. synchronize_rcu() rcu_read_lock() / rcu_read_unlock() - call_rcu() rcu_dereference() +a. rcu_read_lock() / rcu_read_unlock() + rcu_dereference() -b. synchronize_rcu_bh() rcu_read_lock_bh() / rcu_read_unlock_bh() - call_rcu_bh() rcu_dereference_bh() +b. rcu_read_lock_bh() / rcu_read_unlock_bh() + local_bh_disable() / local_bh_enable() + rcu_dereference_bh() -c. synchronize_sched() rcu_read_lock_sched() / rcu_read_unlock_sched() - call_rcu_sched() preempt_disable() / preempt_enable() - local_irq_save() / local_irq_restore() - hardirq enter / hardirq exit - NMI enter / NMI exit - rcu_dereference_sched() +c. rcu_read_lock_sched() / rcu_read_unlock_sched() + preempt_disable() / preempt_enable() + local_irq_save() / local_irq_restore() + hardirq enter / hardirq exit + NMI enter / NMI exit + rcu_dereference_sched() -These three mechanisms are used as follows: +These three flavors are used as follows: a. RCU applied to normal data structures. @@ -867,18 +879,20 @@ RCU: Critical sections Grace period Barrier bh: Critical sections Grace period Barrier - rcu_read_lock_bh call_rcu_bh rcu_barrier_bh - rcu_read_unlock_bh synchronize_rcu_bh - rcu_dereference_bh synchronize_rcu_bh_expedited + rcu_read_lock_bh call_rcu rcu_barrier + rcu_read_unlock_bh synchronize_rcu + [local_bh_disable] synchronize_rcu_expedited + [and friends] + rcu_dereference_bh rcu_dereference_bh_check rcu_dereference_bh_protected rcu_read_lock_bh_held sched: Critical sections Grace period Barrier - rcu_read_lock_sched synchronize_sched rcu_barrier_sched - rcu_read_unlock_sched call_rcu_sched - [preempt_disable] synchronize_sched_expedited + rcu_read_lock_sched call_rcu rcu_barrier + rcu_read_unlock_sched synchronize_rcu + [preempt_disable] synchronize_rcu_expedited [and friends] rcu_read_lock_sched_notrace rcu_read_unlock_sched_notrace @@ -890,8 +904,8 @@ sched: Critical sections Grace period Barrier SRCU: Critical sections Grace period Barrier - srcu_read_lock synchronize_srcu srcu_barrier - srcu_read_unlock call_srcu + srcu_read_lock call_srcu srcu_barrier + srcu_read_unlock synchronize_srcu srcu_dereference synchronize_srcu_expedited srcu_dereference_check srcu_read_lock_held @@ -1034,7 +1048,7 @@ Answer: Just as PREEMPT_RT permits preemption of spinlock spinlocks blocking while in RCU read-side critical sections. - Why the apparent inconsistency? Because it is it + Why the apparent inconsistency? Because it is possible to use priority boosting to keep the RCU grace periods short if need be (for example, if running short of memory). In contrast, if blocking waiting diff --git a/Documentation/admin-guide/LSM/SELinux.rst b/Documentation/admin-guide/LSM/SELinux.rst index f722c9b4173a..520a1c2c6fd2 100644 --- a/Documentation/admin-guide/LSM/SELinux.rst +++ b/Documentation/admin-guide/LSM/SELinux.rst @@ -6,7 +6,7 @@ If you want to use SELinux, chances are you will want to use the distro-provided policies, or install the latest reference policy release from - http://oss.tresys.com/projects/refpolicy + https://github.com/SELinuxProject/refpolicy However, if you want to install a dummy policy for testing, you can do using ``mdp`` provided under diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 476722b7b636..7bf3f129c68b 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -56,11 +56,13 @@ v1 is available under Documentation/cgroup-v1/. 5-3-3-2. IO Latency Interface Files 5-4. PID 5-4-1. PID Interface Files - 5-5. Device - 5-6. RDMA - 5-6-1. RDMA Interface Files - 5-7. Misc - 5-7-1. perf_event + 5-5. Cpuset + 5.5-1. Cpuset Interface Files + 5-6. Device + 5-7. RDMA + 5-7-1. RDMA Interface Files + 5-8. Misc + 5-8-1. perf_event 5-N. Non-normative information 5-N-1. CPU controller root cgroup process behaviour 5-N-2. IO controller root cgroup process behaviour @@ -1610,6 +1612,176 @@ through fork() or clone(). These will return -EAGAIN if the creation of a new process would cause a cgroup policy to be violated. +Cpuset +------ + +The "cpuset" controller provides a mechanism for constraining +the CPU and memory node placement of tasks to only the resources +specified in the cpuset interface files in a task's current cgroup. +This is especially valuable on large NUMA systems where placing jobs +on properly sized subsets of the systems with careful processor and +memory placement to reduce cross-node memory access and contention +can improve overall system performance. + +The "cpuset" controller is hierarchical. That means the controller +cannot use CPUs or memory nodes not allowed in its parent. + + +Cpuset Interface Files +~~~~~~~~~~~~~~~~~~~~~~ + + cpuset.cpus + A read-write multiple values file which exists on non-root + cpuset-enabled cgroups. + + It lists the requested CPUs to be used by tasks within this + cgroup. The actual list of CPUs to be granted, however, is + subjected to constraints imposed by its parent and can differ + from the requested CPUs. + + The CPU numbers are comma-separated numbers or ranges. + For example: + + # cat cpuset.cpus + 0-4,6,8-10 + + An empty value indicates that the cgroup is using the same + setting as the nearest cgroup ancestor with a non-empty + "cpuset.cpus" or all the available CPUs if none is found. + + The value of "cpuset.cpus" stays constant until the next update + and won't be affected by any CPU hotplug events. + + cpuset.cpus.effective + A read-only multiple values file which exists on all + cpuset-enabled cgroups. + + It lists the onlined CPUs that are actually granted to this + cgroup by its parent. These CPUs are allowed to be used by + tasks within the current cgroup. + + If "cpuset.cpus" is empty, the "cpuset.cpus.effective" file shows + all the CPUs from the parent cgroup that can be available to + be used by this cgroup. Otherwise, it should be a subset of + "cpuset.cpus" unless none of the CPUs listed in "cpuset.cpus" + can be granted. In this case, it will be treated just like an + empty "cpuset.cpus". + + Its value will be affected by CPU hotplug events. + + cpuset.mems + A read-write multiple values file which exists on non-root + cpuset-enabled cgroups. + + It lists the requested memory nodes to be used by tasks within + this cgroup. The actual list of memory nodes granted, however, + is subjected to constraints imposed by its parent and can differ + from the requested memory nodes. + + The memory node numbers are comma-separated numbers or ranges. + For example: + + # cat cpuset.mems + 0-1,3 + + An empty value indicates that the cgroup is using the same + setting as the nearest cgroup ancestor with a non-empty + "cpuset.mems" or all the available memory nodes if none + is found. + + The value of "cpuset.mems" stays constant until the next update + and won't be affected by any memory nodes hotplug events. + + cpuset.mems.effective + A read-only multiple values file which exists on all + cpuset-enabled cgroups. + + It lists the onlined memory nodes that are actually granted to + this cgroup by its parent. These memory nodes are allowed to + be used by tasks within the current cgroup. + + If "cpuset.mems" is empty, it shows all the memory nodes from the + parent cgroup that will be available to be used by this cgroup. + Otherwise, it should be a subset of "cpuset.mems" unless none of + the memory nodes listed in "cpuset.mems" can be granted. In this + case, it will be treated just like an empty "cpuset.mems". + + Its value will be affected by memory nodes hotplug events. + + cpuset.cpus.partition + A read-write single value file which exists on non-root + cpuset-enabled cgroups. This flag is owned by the parent cgroup + and is not delegatable. + + It accepts only the following input values when written to. + + "root" - a paritition root + "member" - a non-root member of a partition + + When set to be a partition root, the current cgroup is the + root of a new partition or scheduling domain that comprises + itself and all its descendants except those that are separate + partition roots themselves and their descendants. The root + cgroup is always a partition root. + + There are constraints on where a partition root can be set. + It can only be set in a cgroup if all the following conditions + are true. + + 1) The "cpuset.cpus" is not empty and the list of CPUs are + exclusive, i.e. they are not shared by any of its siblings. + 2) The parent cgroup is a partition root. + 3) The "cpuset.cpus" is also a proper subset of the parent's + "cpuset.cpus.effective". + 4) There is no child cgroups with cpuset enabled. This is for + eliminating corner cases that have to be handled if such a + condition is allowed. + + Setting it to partition root will take the CPUs away from the + effective CPUs of the parent cgroup. Once it is set, this + file cannot be reverted back to "member" if there are any child + cgroups with cpuset enabled. + + A parent partition cannot distribute all its CPUs to its + child partitions. There must be at least one cpu left in the + parent partition. + + Once becoming a partition root, changes to "cpuset.cpus" is + generally allowed as long as the first condition above is true, + the change will not take away all the CPUs from the parent + partition and the new "cpuset.cpus" value is a superset of its + children's "cpuset.cpus" values. + + Sometimes, external factors like changes to ancestors' + "cpuset.cpus" or cpu hotplug can cause the state of the partition + root to change. On read, the "cpuset.sched.partition" file + can show the following values. + + "member" Non-root member of a partition + "root" Partition root + "root invalid" Invalid partition root + + It is a partition root if the first 2 partition root conditions + above are true and at least one CPU from "cpuset.cpus" is + granted by the parent cgroup. + + A partition root can become invalid if none of CPUs requested + in "cpuset.cpus" can be granted by the parent cgroup or the + parent cgroup is no longer a partition root itself. In this + case, it is not a real partition even though the restriction + of the first partition root condition above will still apply. + The cpu affinity of all the tasks in the cgroup will then be + associated with CPUs in the nearest ancestor partition. + + An invalid partition root can be transitioned back to a + real partition root if at least one of the requested CPUs + can now be granted by its parent. In this case, the cpu + affinity of all the tasks in the formerly invalid partition + will be associated to the CPUs of the newly formed partition. + Changing the partition state of an invalid partition root to + "member" is always allowed even if child cpusets are present. + + Device controller ----------------- @@ -1879,8 +2051,10 @@ following two functions. wbc_init_bio(@wbc, @bio) Should be called for each bio carrying writeback data and - associates the bio with the inode's owner cgroup. Can be - called anytime between bio allocation and submission. + associates the bio with the inode's owner cgroup and the + corresponding request queue. This must be called after + a queue (device) has been associated with the bio and + before submission. wbc_account_io(@wbc, @page, @bytes) Should be called for each data segment being written out. @@ -1899,7 +2073,7 @@ the configuration, the bio may be executed at a lower priority and if the writeback session is holding shared resources, e.g. a journal entry, may lead to priority inversion. There is no one easy solution for the problem. Filesystems can try to work around specific problem -cases by skipping wbc_init_bio() or using bio_associate_blkcg() +cases by skipping wbc_init_bio() and using bio_associate_blkg() directly. diff --git a/Documentation/admin-guide/devices.rst b/Documentation/admin-guide/devices.rst index 7fadc05330dd..d41671aeaef0 100644 --- a/Documentation/admin-guide/devices.rst +++ b/Documentation/admin-guide/devices.rst @@ -1,3 +1,4 @@ +.. _admin_devices: Linux allocated devices (4.x+ version) ====================================== diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst index fdf72429f801..252e5ef324e5 100644 --- a/Documentation/admin-guide/dynamic-debug-howto.rst +++ b/Documentation/admin-guide/dynamic-debug-howto.rst @@ -110,8 +110,8 @@ If your query set is big, you can batch them too:: ~# cat query-batch-file > <debugfs>/dynamic_debug/control -A another way is to use wildcard. The match rule support ``*`` (matches -zero or more characters) and ``?`` (matches exactly one character).For +Another way is to use wildcards. The match rule supports ``*`` (matches +zero or more characters) and ``?`` (matches exactly one character). For example, you can match all usb drivers:: ~# echo "file drivers/usb/* +p" > <debugfs>/dynamic_debug/control @@ -258,7 +258,7 @@ this boot parameter for debugging purposes. If ``foo`` module is not built-in, ``foo.dyndbg`` will still be processed at boot time, without effect, but will be reprocessed when module is -loaded later. ``dyndbg_query=`` and bare ``dyndbg=`` are only processed at +loaded later. ``ddebug_query=`` and bare ``dyndbg=`` are only processed at boot. @@ -301,7 +301,7 @@ The ``dyndbg`` option is a "fake" module parameter, which means: For ``CONFIG_DYNAMIC_DEBUG`` kernels, any settings given at boot-time (or enabled by ``-DDEBUG`` flag during compilation) can be disabled later via -the sysfs interface if the debug messages are no longer needed:: +the debugfs interface if the debug messages are no longer needed:: echo "module module_name -p" > <debugfs>/dynamic_debug/control diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst index 965745d5fb9a..0a491676685e 100644 --- a/Documentation/admin-guide/index.rst +++ b/Documentation/admin-guide/index.rst @@ -76,6 +76,7 @@ configure specific aspects of kernel behavior to your liking. thunderbolt LSM/index mm/index + perf-security .. only:: subproject and html diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 81d1d5a74728..37e235be1d35 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -331,7 +331,7 @@ APC and your system crashes randomly. apic= [APIC,X86] Advanced Programmable Interrupt Controller - Change the output verbosity whilst booting + Change the output verbosity while booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output when initialising the APIC and IO-APIC components. @@ -486,10 +486,14 @@ cut the overhead, others just disable the usage. So only cgroup_disable=memory is actually worthy} - cgroup_no_v1= [KNL] Disable one, multiple, all cgroup controllers in v1 - Format: { controller[,controller...] | "all" } + cgroup_no_v1= [KNL] Disable cgroup controllers and named hierarchies in v1 + Format: { { controller | "all" | "named" } + [,{ controller | "all" | "named" }...] } Like cgroup_disable, but only applies to cgroup v1; the blacklisted controllers remain available in cgroup2. + "all" blacklists all controllers and "named" disables + named mounts. Specifying both "all" and "named" disables + all v1 hierarchies. cgroup.memory= [KNL] Pass options to the cgroup memory controller. Format: <string> @@ -674,6 +678,9 @@ cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system + cpuidle.governor= + [CPU_IDLE] Name of the cpuidle governor to use. + cpufreq.off=1 [CPU_FREQ] disable the cpufreq sub-system @@ -856,7 +863,8 @@ causing system reset or hang due to sending INIT from AP to BSP. - disable_counter_freezing [HW] + perf_v4_pmi= [X86,INTEL] + Format: <bool> Disable Intel PMU counter freezing feature. The feature only exists starting from Arch Perfmon v4 (Skylake and newer). @@ -2095,6 +2103,9 @@ off Disables hypervisor mitigations and doesn't emit any warnings. + It also drops the swap size and available + RAM limit restriction on both hypervisor and + bare metal. Default is 'flush'. @@ -2826,7 +2837,7 @@ check bypass). With this option data leaks are possible in the system. - nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2 + nospectre_v2 [X86,PPC_FSL_BOOK3E] Disable all mitigations for the Spectre variant 2 (indirect branch prediction) vulnerability. System may allow data leaks with this option, which is equivalent to spectre_v2=off. @@ -3504,6 +3515,10 @@ before loading. See Documentation/blockdev/ramdisk.txt. + psi= [KNL] Enable or disable pressure stall information + tracking. + Format: <bool> + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for; one of (bare|imps|exps|lifebook|any). psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports @@ -3743,24 +3758,6 @@ in microseconds. The default of zero says no holdoff. - rcutorture.cbflood_inter_holdoff= [KNL] - Set holdoff time (jiffies) between successive - callback-flood tests. - - rcutorture.cbflood_intra_holdoff= [KNL] - Set holdoff time (jiffies) between successive - bursts of callbacks within a given callback-flood - test. - - rcutorture.cbflood_n_burst= [KNL] - Set the number of bursts making up a given - callback-flood test. Set this to zero to - disable callback-flood testing. - - rcutorture.cbflood_n_per_burst= [KNL] - Set the number of callbacks to be registered - in a given burst of a callback-flood test. - rcutorture.fqs_duration= [KNL] Set duration of force_quiescent_state bursts in microseconds. @@ -3773,6 +3770,23 @@ Set wait time between force_quiescent_state bursts in seconds. + rcutorture.fwd_progress= [KNL] + Enable RCU grace-period forward-progress testing + for the types of RCU supporting this notion. + + rcutorture.fwd_progress_div= [KNL] + Specify the fraction of a CPU-stall-warning + period to do tight-loop forward-progress testing. + + rcutorture.fwd_progress_holdoff= [KNL] + Number of seconds to wait between successive + forward-progress tests. + + rcutorture.fwd_progress_need_resched= [KNL] + Enclose cond_resched() calls within checks for + need_resched() during tight-loop forward-progress + testing. + rcutorture.gp_cond= [KNL] Use conditional/asynchronous update-side primitives, if available. @@ -4194,9 +4208,13 @@ spectre_v2= [X86] Control mitigation of Spectre variant 2 (indirect branch speculation) vulnerability. + The default operation protects the kernel from + user space attacks. - on - unconditionally enable - off - unconditionally disable + on - unconditionally enable, implies + spectre_v2_user=on + off - unconditionally disable, implies + spectre_v2_user=off auto - kernel detects whether your CPU model is vulnerable @@ -4206,6 +4224,12 @@ CONFIG_RETPOLINE configuration option, and the compiler with which the kernel was built. + Selecting 'on' will also enable the mitigation + against user space to user space task attacks. + + Selecting 'off' will disable both the kernel and + the user space protections. + Specific mitigations can also be selected manually: retpoline - replace indirect branches @@ -4215,6 +4239,48 @@ Not specifying this option is equivalent to spectre_v2=auto. + spectre_v2_user= + [X86] Control mitigation of Spectre variant 2 + (indirect branch speculation) vulnerability between + user space tasks + + on - Unconditionally enable mitigations. Is + enforced by spectre_v2=on + + off - Unconditionally disable mitigations. Is + enforced by spectre_v2=off + + prctl - Indirect branch speculation is enabled, + but mitigation can be enabled via prctl + per thread. The mitigation control state + is inherited on fork. + + prctl,ibpb + - Like "prctl" above, but only STIBP is + controlled per thread. IBPB is issued + always when switching between different user + space processes. + + seccomp + - Same as "prctl" above, but all seccomp + threads will enable the mitigation unless + they explicitly opt out. + + seccomp,ibpb + - Like "seccomp" above, but only STIBP is + controlled per thread. IBPB is issued + always when switching between different + user space processes. + + auto - Kernel selects the mitigation depending on + the available CPU features and vulnerability. + + Default mitigation: + If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl" + + Not specifying this option is equivalent to + spectre_v2_user=auto. + spec_store_bypass_disable= [HW] Control Speculative Store Bypass (SSB) Disable mitigation (Speculative Store Bypass vulnerability) @@ -4713,6 +4779,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= diff --git a/Documentation/admin-guide/l1tf.rst b/Documentation/admin-guide/l1tf.rst index b85dd80510b0..9af977384168 100644 --- a/Documentation/admin-guide/l1tf.rst +++ b/Documentation/admin-guide/l1tf.rst @@ -405,6 +405,9 @@ time with the option "l1tf=". The valid arguments for this option are: off Disables hypervisor mitigations and doesn't emit any warnings. + It also drops the swap size and available RAM limit restrictions + on both hypervisor and bare metal. + ============ ============================================================= The default is 'flush'. For details about L1D flushing see :ref:`l1d_flush`. @@ -576,7 +579,8 @@ Default mitigations The kernel default mitigations for vulnerable processors are: - PTE inversion to protect against malicious user space. This is done - unconditionally and cannot be controlled. + unconditionally and cannot be controlled. The swap storage is limited + to ~16TB. - L1D conditional flushing on VMENTER when EPT is enabled for a guest. diff --git a/Documentation/admin-guide/mm/concepts.rst b/Documentation/admin-guide/mm/concepts.rst index 291699c810d4..c2531b14bf46 100644 --- a/Documentation/admin-guide/mm/concepts.rst +++ b/Documentation/admin-guide/mm/concepts.rst @@ -4,13 +4,13 @@ Concepts overview ================= -The memory management in Linux is complex system that evolved over the -years and included more and more functionality to support variety of +The memory management in Linux is a complex system that evolved over the +years and included more and more functionality to support a variety of systems from MMU-less microcontrollers to supercomputers. The memory -management for systems without MMU is called ``nommu`` and it +management for systems without an MMU is called ``nommu`` and it definitely deserves a dedicated document, which hopefully will be eventually written. Yet, although some of the concepts are the same, -here we assume that MMU is available and CPU can translate a virtual +here we assume that an MMU is available and a CPU can translate a virtual address to a physical address. .. contents:: :local: @@ -21,10 +21,10 @@ Virtual Memory Primer The physical memory in a computer system is a limited resource and even for systems that support memory hotplug there is a hard limit on the amount of memory that can be installed. The physical memory is not -necessary contiguous, it might be accessible as a set of distinct +necessarily contiguous; it might be accessible as a set of distinct address ranges. Besides, different CPU architectures, and even -different implementations of the same architecture have different view -how these address ranges defined. +different implementations of the same architecture have different views +of how these address ranges are defined. All this makes dealing directly with physical memory quite complex and to avoid this complexity a concept of virtual memory was developed. @@ -48,8 +48,8 @@ appropriate kernel configuration option. Each physical memory page can be mapped as one or more virtual pages. These mappings are described by page tables that allow -translation from virtual address used by programs to real address in -the physical memory. The page tables organized hierarchically. +translation from a virtual address used by programs to the physical +memory address. The page tables are organized hierarchically. The tables at the lowest level of the hierarchy contain physical addresses of actual pages used by the software. The tables at higher @@ -121,8 +121,8 @@ Nodes Many multi-processor machines are NUMA - Non-Uniform Memory Access - systems. In such systems the memory is arranged into banks that have different access latency depending on the "distance" from the -processor. Each bank is referred as `node` and for each node Linux -constructs an independent memory management subsystem. A node has it's +processor. Each bank is referred to as a `node` and for each node Linux +constructs an independent memory management subsystem. A node has its own set of zones, lists of free and used pages and various statistics counters. You can find more details about NUMA in :ref:`Documentation/vm/numa.rst <numa>` and in @@ -149,9 +149,9 @@ for program's stack and heap or by explicit calls to mmap(2) system call. Usually, the anonymous mappings only define virtual memory areas that the program is allowed to access. The read accesses will result in creation of a page table entry that references a special physical -page filled with zeroes. When the program performs a write, regular +page filled with zeroes. When the program performs a write, a regular physical page will be allocated to hold the written data. The page -will be marked dirty and if the kernel will decide to repurpose it, +will be marked dirty and if the kernel decides to repurpose it, the dirty page will be swapped out. Reclaim @@ -181,8 +181,8 @@ pressure. The process of freeing the reclaimable physical memory pages and repurposing them is called (surprise!) `reclaim`. Linux can reclaim pages either asynchronously or synchronously, depending on the state -of the system. When system is not loaded, most of the memory is free -and allocation request will be satisfied immediately from the free +of the system. When the system is not loaded, most of the memory is free +and allocation requests will be satisfied immediately from the free pages supply. As the load increases, the amount of the free pages goes down and when it reaches a certain threshold (high watermark), an allocation request will awaken the ``kswapd`` daemon. It will @@ -190,7 +190,7 @@ asynchronously scan memory pages and either just free them if the data they contain is available elsewhere, or evict to the backing storage device (remember those dirty pages?). As memory usage increases even more and reaches another threshold - min watermark - an allocation -will trigger the `direct reclaim`. In this case allocation is stalled +will trigger `direct reclaim`. In this case allocation is stalled until enough memory pages are reclaimed to satisfy the request. Compaction @@ -200,7 +200,7 @@ As the system runs, tasks allocate and free the memory and it becomes fragmented. Although with virtual memory it is possible to present scattered physical pages as virtually contiguous range, sometimes it is necessary to allocate large physically contiguous memory areas. Such -need may arise, for instance, when a device driver requires large +need may arise, for instance, when a device driver requires a large buffer for DMA, or when THP allocates a huge page. Memory `compaction` addresses the fragmentation issue. This mechanism moves occupied pages from the lower part of a memory zone to free pages in the upper part @@ -208,15 +208,16 @@ of the zone. When a compaction scan is finished free pages are grouped together at the beginning of the zone and allocations of large physically contiguous areas become possible. -Like reclaim, the compaction may happen asynchronously in ``kcompactd`` -daemon or synchronously as a result of memory allocation request. +Like reclaim, the compaction may happen asynchronously in the ``kcompactd`` +daemon or synchronously as a result of a memory allocation request. OOM killer ========== -It may happen, that on a loaded machine memory will be exhausted. When -the kernel detects that the system runs out of memory (OOM) it invokes -`OOM killer`. Its mission is simple: all it has to do is to select a -task to sacrifice for the sake of the overall system health. The -selected task is killed in a hope that after it exits enough memory -will be freed to continue normal operation. +It is possible that on a loaded machine memory will be exhausted and the +kernel will be unable to reclaim enough memory to continue to operate. In +order to save the rest of the system, it invokes the `OOM killer`. + +The `OOM killer` selects a task to sacrifice for the sake of the overall +system health. The selected task is killed in a hope that after it exits +enough memory will be freed to continue normal operation. diff --git a/Documentation/admin-guide/perf-security.rst b/Documentation/admin-guide/perf-security.rst new file mode 100644 index 000000000000..f73ebfe9bfe2 --- /dev/null +++ b/Documentation/admin-guide/perf-security.rst @@ -0,0 +1,97 @@ +.. _perf_security: + +Perf Events and tool security +============================= + +Overview +-------- + +Usage of Performance Counters for Linux (perf_events) [1]_ , [2]_ , [3]_ can +impose a considerable risk of leaking sensitive data accessed by monitored +processes. The data leakage is possible both in scenarios of direct usage of +perf_events system call API [2]_ and over data files generated by Perf tool user +mode utility (Perf) [3]_ , [4]_ . The risk depends on the nature of data that +perf_events performance monitoring units (PMU) [2]_ collect and expose for +performance analysis. Having that said perf_events/Perf performance monitoring +is the subject for security access control management [5]_ . + +perf_events/Perf access control +------------------------------- + +To perform security checks, the Linux implementation splits processes into two +categories [6]_ : a) privileged processes (whose effective user ID is 0, referred +to as superuser or root), and b) unprivileged processes (whose effective UID is +nonzero). Privileged processes bypass all kernel security permission checks so +perf_events performance monitoring is fully available to privileged processes +without access, scope and resource restrictions. + +Unprivileged processes are subject to a full security permission check based on +the process's credentials [5]_ (usually: effective UID, effective GID, and +supplementary group list). + +Linux divides the privileges traditionally associated with superuser into +distinct units, known as capabilities [6]_ , which can be independently enabled +and disabled on per-thread basis for processes and files of unprivileged users. + +Unprivileged processes with enabled CAP_SYS_ADMIN capability are treated as +privileged processes with respect to perf_events performance monitoring and +bypass *scope* permissions checks in the kernel. + +Unprivileged processes using perf_events system call API is also subject for +PTRACE_MODE_READ_REALCREDS ptrace access mode check [7]_ , whose outcome +determines whether monitoring is permitted. So unprivileged processes provided +with CAP_SYS_PTRACE capability are effectively permitted to pass the check. + +Other capabilities being granted to unprivileged processes can effectively +enable capturing of additional data required for later performance analysis of +monitored processes or a system. For example, CAP_SYSLOG capability permits +reading kernel space memory addresses from /proc/kallsyms file. + +perf_events/Perf unprivileged users +----------------------------------- + +perf_events/Perf *scope* and *access* control for unprivileged processes is +governed by perf_event_paranoid [2]_ setting: + +-1: + Impose no *scope* and *access* restrictions on using perf_events performance + monitoring. Per-user per-cpu perf_event_mlock_kb [2]_ locking limit is + ignored when allocating memory buffers for storing performance data. + This is the least secure mode since allowed monitored *scope* is + maximized and no perf_events specific limits are imposed on *resources* + allocated for performance monitoring. + +>=0: + *scope* includes per-process and system wide performance monitoring + but excludes raw tracepoints and ftrace function tracepoints monitoring. + CPU and system events happened when executing either in user or + in kernel space can be monitored and captured for later analysis. + Per-user per-cpu perf_event_mlock_kb locking limit is imposed but + ignored for unprivileged processes with CAP_IPC_LOCK [6]_ capability. + +>=1: + *scope* includes per-process performance monitoring only and excludes + system wide performance monitoring. CPU and system events happened when + executing either in user or in kernel space can be monitored and + captured for later analysis. Per-user per-cpu perf_event_mlock_kb + locking limit is imposed but ignored for unprivileged processes with + CAP_IPC_LOCK capability. + +>=2: + *scope* includes per-process performance monitoring only. CPU and system + events happened when executing in user space only can be monitored and + captured for later analysis. Per-user per-cpu perf_event_mlock_kb + locking limit is imposed but ignored for unprivileged processes with + CAP_IPC_LOCK capability. + +Bibliography +------------ + +.. [1] `<https://lwn.net/Articles/337493/>`_ +.. [2] `<http://man7.org/linux/man-pages/man2/perf_event_open.2.html>`_ +.. [3] `<http://web.eece.maine.edu/~vweaver/projects/perf_events/>`_ +.. [4] `<https://perf.wiki.kernel.org/index.php/Main_Page>`_ +.. [5] `<https://www.kernel.org/doc/html/latest/security/credentials.html>`_ +.. [6] `<http://man7.org/linux/man-pages/man7/capabilities.7.html>`_ +.. [7] `<http://man7.org/linux/man-pages/man2/ptrace.2.html>`_ + diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 47153e64dfb5..7eca9026a9ed 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -150,7 +150,7 @@ data structures necessary to handle the given policy and, possibly, to add a governor ``sysfs`` interface to it. Next, the governor is started by invoking its ``->start()`` callback. -That callback it expected to register per-CPU utilization update callbacks for +That callback is expected to register per-CPU utilization update callbacks for all of the online CPUs belonging to the given policy with the CPU scheduler. The utilization update callbacks will be invoked by the CPU scheduler on important events, like task enqueue and dequeue, on every iteration of the diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst new file mode 100644 index 000000000000..106379e2619f --- /dev/null +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -0,0 +1,631 @@ +.. |struct cpuidle_state| replace:: :c:type:`struct cpuidle_state <cpuidle_state>` +.. |cpufreq| replace:: :doc:`CPU Performance Scaling <cpufreq>` + +======================== +CPU Idle Time Management +======================== + +:: + + Copyright (c) 2018 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +Concepts +======== + +Modern processors are generally able to enter states in which the execution of +a program is suspended and instructions belonging to it are not fetched from +memory or executed. Those states are the *idle* states of the processor. + +Since part of the processor hardware is not used in idle states, entering them +generally allows power drawn by the processor to be reduced and, in consequence, +it is an opportunity to save energy. + +CPU idle time management is an energy-efficiency feature concerned about using +the idle states of processors for this purpose. + +Logical CPUs +------------ + +CPU idle time management operates on CPUs as seen by the *CPU scheduler* (that +is the part of the kernel responsible for the distribution of computational +work in the system). In its view, CPUs are *logical* units. That is, they need +not be separate physical entities and may just be interfaces appearing to +software as individual single-core processors. In other words, a CPU is an +entity which appears to be fetching instructions that belong to one sequence +(program) from memory and executing them, but it need not work this way +physically. Generally, three different cases can be consider here. + +First, if the whole processor can only follow one sequence of instructions (one +program) at a time, it is a CPU. In that case, if the hardware is asked to +enter an idle state, that applies to the processor as a whole. + +Second, if the processor is multi-core, each core in it is able to follow at +least one program at a time. The cores need not be entirely independent of each +other (for example, they may share caches), but still most of the time they +work physically in parallel with each other, so if each of them executes only +one program, those programs run mostly independently of each other at the same +time. The entire cores are CPUs in that case and if the hardware is asked to +enter an idle state, that applies to the core that asked for it in the first +place, but it also may apply to a larger unit (say a "package" or a "cluster") +that the core belongs to (in fact, it may apply to an entire hierarchy of larger +units containing the core). Namely, if all of the cores in the larger unit +except for one have been put into idle states at the "core level" and the +remaining core asks the processor to enter an idle state, that may trigger it +to put the whole larger unit into an idle state which also will affect the +other cores in that unit. + +Finally, each core in a multi-core processor may be able to follow more than one +program in the same time frame (that is, each core may be able to fetch +instructions from multiple locations in memory and execute them in the same time +frame, but not necessarily entirely in parallel with each other). In that case +the cores present themselves to software as "bundles" each consisting of +multiple individual single-core "processors", referred to as *hardware threads* +(or hyper-threads specifically on Intel hardware), that each can follow one +sequence of instructions. Then, the hardware threads are CPUs from the CPU idle +time management perspective and if the processor is asked to enter an idle state +by one of them, the hardware thread (or CPU) that asked for it is stopped, but +nothing more happens, unless all of the other hardware threads within the same +core also have asked the processor to enter an idle state. In that situation, +the core may be put into an idle state individually or a larger unit containing +it may be put into an idle state as a whole (if the other cores within the +larger unit are in idle states already). + +Idle CPUs +--------- + +Logical CPUs, simply referred to as "CPUs" in what follows, are regarded as +*idle* by the Linux kernel when there are no tasks to run on them except for the +special "idle" task. + +Tasks are the CPU scheduler's representation of work. Each task consists of a +sequence of instructions to execute, or code, data to be manipulated while +running that code, and some context information that needs to be loaded into the +processor every time the task's code is run by a CPU. The CPU scheduler +distributes work by assigning tasks to run to the CPUs present in the system. + +Tasks can be in various states. In particular, they are *runnable* if there are +no specific conditions preventing their code from being run by a CPU as long as +there is a CPU available for that (for example, they are not waiting for any +events to occur or similar). When a task becomes runnable, the CPU scheduler +assigns it to one of the available CPUs to run and if there are no more runnable +tasks assigned to it, the CPU will load the given task's context and run its +code (from the instruction following the last one executed so far, possibly by +another CPU). [If there are multiple runnable tasks assigned to one CPU +simultaneously, they will be subject to prioritization and time sharing in order +to allow them to make some progress over time.] + +The special "idle" task becomes runnable if there are no other runnable tasks +assigned to the given CPU and the CPU is then regarded as idle. In other words, +in Linux idle CPUs run the code of the "idle" task called *the idle loop*. That +code may cause the processor to be put into one of its idle states, if they are +supported, in order to save energy, but if the processor does not support any +idle states, or there is not enough time to spend in an idle state before the +next wakeup event, or there are strict latency constraints preventing any of the +available idle states from being used, the CPU will simply execute more or less +useless instructions in a loop until it is assigned a new task to run. + + +.. _idle-loop: + +The Idle Loop +============= + +The idle loop code takes two major steps in every iteration of it. First, it +calls into a code module referred to as the *governor* that belongs to the CPU +idle time management subsystem called ``CPUIdle`` to select an idle state for +the CPU to ask the hardware to enter. Second, it invokes another code module +from the ``CPUIdle`` subsystem, called the *driver*, to actually ask the +processor hardware to enter the idle state selected by the governor. + +The role of the governor is to find an idle state most suitable for the +conditions at hand. For this purpose, idle states that the hardware can be +asked to enter by logical CPUs are represented in an abstract way independent of +the platform or the processor architecture and organized in a one-dimensional +(linear) array. That array has to be prepared and supplied by the ``CPUIdle`` +driver matching the platform the kernel is running on at the initialization +time. This allows ``CPUIdle`` governors to be independent of the underlying +hardware and to work with any platforms that the Linux kernel can run on. + +Each idle state present in that array is characterized by two parameters to be +taken into account by the governor, the *target residency* and the (worst-case) +*exit latency*. The target residency is the minimum time the hardware must +spend in the given state, including the time needed to enter it (which may be +substantial), in order to save more energy than it would save by entering one of +the shallower idle states instead. [The "depth" of an idle state roughly +corresponds to the power drawn by the processor in that state.] The exit +latency, in turn, is the maximum time it will take a CPU asking the processor +hardware to enter an idle state to start executing the first instruction after a +wakeup from that state. Note that in general the exit latency also must cover +the time needed to enter the given state in case the wakeup occurs when the +hardware is entering it and it must be entered completely to be exited in an +ordered manner. + +There are two types of information that can influence the governor's decisions. +First of all, the governor knows the time until the closest timer event. That +time is known exactly, because the kernel programs timers and it knows exactly +when they will trigger, and it is the maximum time the hardware that the given +CPU depends on can spend in an idle state, including the time necessary to enter +and exit it. However, the CPU may be woken up by a non-timer event at any time +(in particular, before the closest timer triggers) and it generally is not known +when that may happen. The governor can only see how much time the CPU actually +was idle after it has been woken up (that time will be referred to as the *idle +duration* from now on) and it can use that information somehow along with the +time until the closest timer to estimate the idle duration in future. How the +governor uses that information depends on what algorithm is implemented by it +and that is the primary reason for having more than one governor in the +``CPUIdle`` subsystem. + +There are two ``CPUIdle`` governors available, ``menu`` and ``ladder``. Which +of them is used depends on the configuration of the kernel and in particular on +whether or not the scheduler tick can be `stopped by the idle +loop <idle-cpus-and-tick_>`_. It is possible to change the governor at run time +if the ``cpuidle_sysfs_switch`` command line parameter has been passed to the +kernel, but that is not safe in general, so it should not be done on production +systems (that may change in the future, though). The name of the ``CPUIdle`` +governor currently used by the kernel can be read from the +:file:`current_governor_ro` (or :file:`current_governor` if +``cpuidle_sysfs_switch`` is present in the kernel command line) file under +:file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``. + +Which ``CPUIdle`` driver is used, on the other hand, usually depends on the +platform the kernel is running on, but there are platforms with more than one +matching driver. For example, there are two drivers that can work with the +majority of Intel platforms, ``intel_idle`` and ``acpi_idle``, one with +hardcoded idle states information and the other able to read that information +from the system's ACPI tables, respectively. Still, even in those cases, the +driver chosen at the system initialization time cannot be replaced later, so the +decision on which one of them to use has to be made early (on Intel platforms +the ``acpi_idle`` driver will be used if ``intel_idle`` is disabled for some +reason or if it does not recognize the processor). The name of the ``CPUIdle`` +driver currently used by the kernel can be read from the :file:`current_driver` +file under :file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``. + + +.. _idle-cpus-and-tick: + +Idle CPUs and The Scheduler Tick +================================ + +The scheduler tick is a timer that triggers periodically in order to implement +the time sharing strategy of the CPU scheduler. Of course, if there are +multiple runnable tasks assigned to one CPU at the same time, the only way to +allow them to make reasonable progress in a given time frame is to make them +share the available CPU time. Namely, in rough approximation, each task is +given a slice of the CPU time to run its code, subject to the scheduling class, +prioritization and so on and when that time slice is used up, the CPU should be +switched over to running (the code of) another task. The currently running task +may not want to give the CPU away voluntarily, however, and the scheduler tick +is there to make the switch happen regardless. That is not the only role of the +tick, but it is the primary reason for using it. + +The scheduler tick is problematic from the CPU idle time management perspective, +because it triggers periodically and relatively often (depending on the kernel +configuration, the length of the tick period is between 1 ms and 10 ms). +Thus, if the tick is allowed to trigger on idle CPUs, it will not make sense +for them to ask the hardware to enter idle states with target residencies above +the tick period length. Moreover, in that case the idle duration of any CPU +will never exceed the tick period length and the energy used for entering and +exiting idle states due to the tick wakeups on idle CPUs will be wasted. + +Fortunately, it is not really necessary to allow the tick to trigger on idle +CPUs, because (by definition) they have no tasks to run except for the special +"idle" one. In other words, from the CPU scheduler perspective, the only user +of the CPU time on them is the idle loop. Since the time of an idle CPU need +not be shared between multiple runnable tasks, the primary reason for using the +tick goes away if the given CPU is idle. Consequently, it is possible to stop +the scheduler tick entirely on idle CPUs in principle, even though that may not +always be worth the effort. + +Whether or not it makes sense to stop the scheduler tick in the idle loop +depends on what is expected by the governor. First, if there is another +(non-tick) timer due to trigger within the tick range, stopping the tick clearly +would be a waste of time, even though the timer hardware may not need to be +reprogrammed in that case. Second, if the governor is expecting a non-timer +wakeup within the tick range, stopping the tick is not necessary and it may even +be harmful. Namely, in that case the governor will select an idle state with +the target residency within the time until the expected wakeup, so that state is +going to be relatively shallow. The governor really cannot select a deep idle +state then, as that would contradict its own expectation of a wakeup in short +order. Now, if the wakeup really occurs shortly, stopping the tick would be a +waste of time and in this case the timer hardware would need to be reprogrammed, +which is expensive. On the other hand, if the tick is stopped and the wakeup +does not occur any time soon, the hardware may spend indefinite amount of time +in the shallow idle state selected by the governor, which will be a waste of +energy. Hence, if the governor is expecting a wakeup of any kind within the +tick range, it is better to allow the tick trigger. Otherwise, however, the +governor will select a relatively deep idle state, so the tick should be stopped +so that it does not wake up the CPU too early. + +In any case, the governor knows what it is expecting and the decision on whether +or not to stop the scheduler tick belongs to it. Still, if the tick has been +stopped already (in one of the previous iterations of the loop), it is better +to leave it as is and the governor needs to take that into account. + +The kernel can be configured to disable stopping the scheduler tick in the idle +loop altogether. That can be done through the build-time configuration of it +(by unsetting the ``CONFIG_NO_HZ_IDLE`` configuration option) or by passing +``nohz=off`` to it in the command line. In both cases, as the stopping of the +scheduler tick is disabled, the governor's decisions regarding it are simply +ignored by the idle loop code and the tick is never stopped. + +The systems that run kernels configured to allow the scheduler tick to be +stopped on idle CPUs are referred to as *tickless* systems and they are +generally regarded as more energy-efficient than the systems running kernels in +which the tick cannot be stopped. If the given system is tickless, it will use +the ``menu`` governor by default and if it is not tickless, the default +``CPUIdle`` governor on it will be ``ladder``. + + +The ``menu`` Governor +===================== + +The ``menu`` governor is the default ``CPUIdle`` governor for tickless systems. +It is quite complex, but the basic principle of its design is straightforward. +Namely, when invoked to select an idle state for a CPU (i.e. an idle state that +the CPU will ask the processor hardware to enter), it attempts to predict the +idle duration and uses the predicted value for idle state selection. + +It first obtains the time until the closest timer event with the assumption +that the scheduler tick will be stopped. That time, referred to as the *sleep +length* in what follows, is the upper bound on the time before the next CPU +wakeup. It is used to determine the sleep length range, which in turn is needed +to get the sleep length correction factor. + +The ``menu`` governor maintains two arrays of sleep length correction factors. +One of them is used when tasks previously running on the given CPU are waiting +for some I/O operations to complete and the other one is used when that is not +the case. Each array contains several correction factor values that correspond +to different sleep length ranges organized so that each range represented in the +array is approximately 10 times wider than the previous one. + +The correction factor for the given sleep length range (determined before +selecting the idle state for the CPU) is updated after the CPU has been woken +up and the closer the sleep length is to the observed idle duration, the closer +to 1 the correction factor becomes (it must fall between 0 and 1 inclusive). +The sleep length is multiplied by the correction factor for the range that it +falls into to obtain the first approximation of the predicted idle duration. + +Next, the governor uses a simple pattern recognition algorithm to refine its +idle duration prediction. Namely, it saves the last 8 observed idle duration +values and, when predicting the idle duration next time, it computes the average +and variance of them. If the variance is small (smaller than 400 square +milliseconds) or it is small relative to the average (the average is greater +that 6 times the standard deviation), the average is regarded as the "typical +interval" value. Otherwise, the longest of the saved observed idle duration +values is discarded and the computation is repeated for the remaining ones. +Again, if the variance of them is small (in the above sense), the average is +taken as the "typical interval" value and so on, until either the "typical +interval" is determined or too many data points are disregarded, in which case +the "typical interval" is assumed to equal "infinity" (the maximum unsigned +integer value). The "typical interval" computed this way is compared with the +sleep length multiplied by the correction factor and the minimum of the two is +taken as the predicted idle duration. + +Then, the governor computes an extra latency limit to help "interactive" +workloads. It uses the observation that if the exit latency of the selected +idle state is comparable with the predicted idle duration, the total time spent +in that state probably will be very short and the amount of energy to save by +entering it will be relatively small, so likely it is better to avoid the +overhead related to entering that state and exiting it. Thus selecting a +shallower state is likely to be a better option then. The first approximation +of the extra latency limit is the predicted idle duration itself which +additionally is divided by a value depending on the number of tasks that +previously ran on the given CPU and now they are waiting for I/O operations to +complete. The result of that division is compared with the latency limit coming +from the power management quality of service, or `PM QoS <cpu-pm-qos_>`_, +framework and the minimum of the two is taken as the limit for the idle states' +exit latency. + +Now, the governor is ready to walk the list of idle states and choose one of +them. For this purpose, it compares the target residency of each state with +the predicted idle duration and the exit latency of it with the computed latency +limit. It selects the state with the target residency closest to the predicted +idle duration, but still below it, and exit latency that does not exceed the +limit. + +In the final step the governor may still need to refine the idle state selection +if it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That +happens if the idle duration predicted by it is less than the tick period and +the tick has not been stopped already (in a previous iteration of the idle +loop). Then, the sleep length used in the previous computations may not reflect +the real time until the closest timer event and if it really is greater than +that time, the governor may need to select a shallower state with a suitable +target residency. + + +.. _idle-states-representation: + +Representation of Idle States +============================= + +For the CPU idle time management purposes all of the physical idle states +supported by the processor have to be represented as a one-dimensional array of +|struct cpuidle_state| objects each allowing an individual (logical) CPU to ask +the processor hardware to enter an idle state of certain properties. If there +is a hierarchy of units in the processor, one |struct cpuidle_state| object can +cover a combination of idle states supported by the units at different levels of +the hierarchy. In that case, the `target residency and exit latency parameters +of it <idle-loop_>`_, must reflect the properties of the idle state at the +deepest level (i.e. the idle state of the unit containing all of the other +units). + +For example, take a processor with two cores in a larger unit referred to as +a "module" and suppose that asking the hardware to enter a specific idle state +(say "X") at the "core" level by one core will trigger the module to try to +enter a specific idle state of its own (say "MX") if the other core is in idle +state "X" already. In other words, asking for idle state "X" at the "core" +level gives the hardware a license to go as deep as to idle state "MX" at the +"module" level, but there is no guarantee that this is going to happen (the core +asking for idle state "X" may just end up in that state by itself instead). +Then, the target residency of the |struct cpuidle_state| object representing +idle state "X" must reflect the minimum time to spend in idle state "MX" of +the module (including the time needed to enter it), because that is the minimum +time the CPU needs to be idle to save any energy in case the hardware enters +that state. Analogously, the exit latency parameter of that object must cover +the exit time of idle state "MX" of the module (and usually its entry time too), +because that is the maximum delay between a wakeup signal and the time the CPU +will start to execute the first new instruction (assuming that both cores in the +module will always be ready to execute instructions as soon as the module +becomes operational as a whole). + +There are processors without direct coordination between different levels of the +hierarchy of units inside them, however. In those cases asking for an idle +state at the "core" level does not automatically affect the "module" level, for +example, in any way and the ``CPUIdle`` driver is responsible for the entire +handling of the hierarchy. Then, the definition of the idle state objects is +entirely up to the driver, but still the physical properties of the idle state +that the processor hardware finally goes into must always follow the parameters +used by the governor for idle state selection (for instance, the actual exit +latency of that idle state must not exceed the exit latency parameter of the +idle state object selected by the governor). + +In addition to the target residency and exit latency idle state parameters +discussed above, the objects representing idle states each contain a few other +parameters describing the idle state and a pointer to the function to run in +order to ask the hardware to enter that state. Also, for each +|struct cpuidle_state| object, there is a corresponding +:c:type:`struct cpuidle_state_usage <cpuidle_state_usage>` one containing usage +statistics of the given idle state. That information is exposed by the kernel +via ``sysfs``. + +For each CPU in the system, there is a :file:`/sys/devices/system/cpu<N>/cpuidle/` +directory in ``sysfs``, where the number ``<N>`` is assigned to the given +CPU at the initialization time. That directory contains a set of subdirectories +called :file:`state0`, :file:`state1` and so on, up to the number of idle state +objects defined for the given CPU minus one. Each of these directories +corresponds to one idle state object and the larger the number in its name, the +deeper the (effective) idle state represented by it. Each of them contains +a number of files (attributes) representing the properties of the idle state +object corresponding to it, as follows: + +``above`` + Total number of times this idle state had been asked for, but the + observed idle duration was certainly too short to match its target + residency. + +``below`` + Total number of times this idle state had been asked for, but cerainly + a deeper idle state would have been a better match for the observed idle + duration. + +``desc`` + Description of the idle state. + +``disable`` + Whether or not this idle state is disabled. + +``latency`` + Exit latency of the idle state in microseconds. + +``name`` + Name of the idle state. + +``power`` + Power drawn by hardware in this idle state in milliwatts (if specified, + 0 otherwise). + +``residency`` + Target residency of the idle state in microseconds. + +``time`` + Total time spent in this idle state by the given CPU (as measured by the + kernel) in microseconds. + +``usage`` + Total number of times the hardware has been asked by the given CPU to + enter this idle state. + +The :file:`desc` and :file:`name` files both contain strings. The difference +between them is that the name is expected to be more concise, while the +description may be longer and it may contain white space or special characters. +The other files listed above contain integer numbers. + +The :file:`disable` attribute is the only writeable one. If it contains 1, the +given idle state is disabled for this particular CPU, which means that the +governor will never select it for this particular CPU and the ``CPUIdle`` +driver will never ask the hardware to enter it for that CPU as a result. +However, disabling an idle state for one CPU does not prevent it from being +asked for by the other CPUs, so it must be disabled for all of them in order to +never be asked for by any of them. [Note that, due to the way the ``ladder`` +governor is implemented, disabling an idle state prevents that governor from +selecting any idle states deeper than the disabled one too.] + +If the :file:`disable` attribute contains 0, the given idle state is enabled for +this particular CPU, but it still may be disabled for some or all of the other +CPUs in the system at the same time. Writing 1 to it causes the idle state to +be disabled for this particular CPU and writing 0 to it allows the governor to +take it into consideration for the given CPU and the driver to ask for it, +unless that state was disabled globally in the driver (in which case it cannot +be used at all). + +The :file:`power` attribute is not defined very well, especially for idle state +objects representing combinations of idle states at different levels of the +hierarchy of units in the processor, and it generally is hard to obtain idle +state power numbers for complex hardware, so :file:`power` often contains 0 (not +available) and if it contains a nonzero number, that number may not be very +accurate and it should not be relied on for anything meaningful. + +The number in the :file:`time` file generally may be greater than the total time +really spent by the given CPU in the given idle state, because it is measured by +the kernel and it may not cover the cases in which the hardware refused to enter +this idle state and entered a shallower one instead of it (or even it did not +enter any idle state at all). The kernel can only measure the time span between +asking the hardware to enter an idle state and the subsequent wakeup of the CPU +and it cannot say what really happened in the meantime at the hardware level. +Moreover, if the idle state object in question represents a combination of idle +states at different levels of the hierarchy of units in the processor, +the kernel can never say how deep the hardware went down the hierarchy in any +particular case. For these reasons, the only reliable way to find out how +much time has been spent by the hardware in different idle states supported by +it is to use idle state residency counters in the hardware, if available. + + +.. _cpu-pm-qos: + +Power Management Quality of Service for CPUs +============================================ + +The power management quality of service (PM QoS) framework in the Linux kernel +allows kernel code and user space processes to set constraints on various +energy-efficiency features of the kernel to prevent performance from dropping +below a required level. The PM QoS constraints can be set globally, in +predefined categories referred to as PM QoS classes, or against individual +devices. + +CPU idle time management can be affected by PM QoS in two ways, through the +global constraint in the ``PM_QOS_CPU_DMA_LATENCY`` class and through the +resume latency constraints for individual CPUs. Kernel code (e.g. device +drivers) can set both of them with the help of special internal interfaces +provided by the PM QoS framework. User space can modify the former by opening +the :file:`cpu_dma_latency` special device file under :file:`/dev/` and writing +a binary value (interpreted as a signed 32-bit integer) to it. In turn, the +resume latency constraint for a CPU can be modified by user space by writing a +string (representing a signed 32-bit integer) to the +:file:`power/pm_qos_resume_latency_us` file under +:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs``, where the CPU number +``<N>`` is allocated at the system initialization time. Negative values +will be rejected in both cases and, also in both cases, the written integer +number will be interpreted as a requested PM QoS constraint in microseconds. + +The requested value is not automatically applied as a new constraint, however, +as it may be less restrictive (greater in this particular case) than another +constraint previously requested by someone else. For this reason, the PM QoS +framework maintains a list of requests that have been made so far in each +global class and for each device, aggregates them and applies the effective +(minimum in this particular case) value as the new constraint. + +In fact, opening the :file:`cpu_dma_latency` special device file causes a new +PM QoS request to be created and added to the priority list of requests in the +``PM_QOS_CPU_DMA_LATENCY`` class and the file descriptor coming from the +"open" operation represents that request. If that file descriptor is then +used for writing, the number written to it will be associated with the PM QoS +request represented by it as a new requested constraint value. Next, the +priority list mechanism will be used to determine the new effective value of +the entire list of requests and that effective value will be set as a new +constraint. Thus setting a new requested constraint value will only change the +real constraint if the effective "list" value is affected by it. In particular, +for the ``PM_QOS_CPU_DMA_LATENCY`` class it only affects the real constraint if +it is the minimum of the requested constraints in the list. The process holding +a file descriptor obtained by opening the :file:`cpu_dma_latency` special device +file controls the PM QoS request associated with that file descriptor, but it +controls this particular PM QoS request only. + +Closing the :file:`cpu_dma_latency` special device file or, more precisely, the +file descriptor obtained while opening it, causes the PM QoS request associated +with that file descriptor to be removed from the ``PM_QOS_CPU_DMA_LATENCY`` +class priority list and destroyed. If that happens, the priority list mechanism +will be used, again, to determine the new effective value for the whole list +and that value will become the new real constraint. + +In turn, for each CPU there is only one resume latency PM QoS request +associated with the :file:`power/pm_qos_resume_latency_us` file under +:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs`` and writing to it causes +this single PM QoS request to be updated regardless of which user space +process does that. In other words, this PM QoS request is shared by the entire +user space, so access to the file associated with it needs to be arbitrated +to avoid confusion. [Arguably, the only legitimate use of this mechanism in +practice is to pin a process to the CPU in question and let it use the +``sysfs`` interface to control the resume latency constraint for it.] It +still only is a request, however. It is a member of a priority list used to +determine the effective value to be set as the resume latency constraint for the +CPU in question every time the list of requests is updated this way or another +(there may be other requests coming from kernel code in that list). + +CPU idle time governors are expected to regard the minimum of the global +effective ``PM_QOS_CPU_DMA_LATENCY`` class constraint and the effective +resume latency constraint for the given CPU as the upper limit for the exit +latency of the idle states they can select for that CPU. They should never +select any idle states with exit latency beyond that limit. + + +Idle States Control Via Kernel Command Line +=========================================== + +In addition to the ``sysfs`` interface allowing individual idle states to be +`disabled for individual CPUs <idle-states-representation_>`_, there are kernel +command line parameters affecting CPU idle time management. + +The ``cpuidle.off=1`` kernel command line option can be used to disable the +CPU idle time management entirely. It does not prevent the idle loop from +running on idle CPUs, but it prevents the CPU idle time governors and drivers +from being invoked. If it is added to the kernel command line, the idle loop +will ask the hardware to enter idle states on idle CPUs via the CPU architecture +support code that is expected to provide a default mechanism for this purpose. +That default mechanism usually is the least common denominator for all of the +processors implementing the architecture (i.e. CPU instruction set) in question, +however, so it is rather crude and not very energy-efficient. For this reason, +it is not recommended for production use. + +The ``cpuidle.governor=`` kernel command line switch allows the ``CPUIdle`` +governor to use to be specified. It has to be appended with a string matching +the name of an available governor (e.g. ``cpuidle.governor=menu``) and that +governor will be used instead of the default one. It is possible to force +the ``menu`` governor to be used on the systems that use the ``ladder`` governor +by default this way, for example. + +The other kernel command line parameters controlling CPU idle time management +described below are only relevant for the *x86* architecture and some of +them affect Intel processors only. + +The *x86* architecture support code recognizes three kernel command line +options related to CPU idle time management: ``idle=poll``, ``idle=halt``, +and ``idle=nomwait``. The first two of them disable the ``acpi_idle`` and +``intel_idle`` drivers altogether, which effectively causes the entire +``CPUIdle`` subsystem to be disabled and makes the idle loop invoke the +architecture support code to deal with idle CPUs. How it does that depends on +which of the two parameters is added to the kernel command line. In the +``idle=halt`` case, the architecture support code will use the ``HLT`` +instruction of the CPUs (which, as a rule, suspends the execution of the program +and causes the hardware to attempt to enter the shallowest available idle state) +for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a +more or less ``lightweight'' sequence of instructions in a tight loop. [Note +that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle +CPUs from saving almost any energy at all may not be the only effect of it. +For example, on Intel hardware it effectively prevents CPUs from using +P-states (see |cpufreq|) that require any number of CPUs in a package to be +idle, so it very well may hurt single-thread computations performance as well as +energy-efficiency. Thus using it for performance reasons may not be a good idea +at all.] + +The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes +``acpi_idle`` to be used (as long as all of the information needed by it is +there in the system's ACPI tables), but it is not allowed to use the +``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states. + +In addition to the architecture-level kernel command line options affecting CPU +idle time management, there are parameters affecting individual ``CPUIdle`` +drivers that can be passed to them via the kernel command line. Specifically, +the ``intel_idle.max_cstate=<n>`` and ``processor.max_cstate=<n>`` parameters, +where ``<n>`` is an idle state index also used in the name of the given +state's directory in ``sysfs`` (see +`Representation of Idle States <idle-states-representation_>`_), causes the +``intel_idle`` and ``acpi_idle`` drivers, respectively, to discard all of the +idle states deeper than idle state ``<n>``. In that case, they will never ask +for any of those idle states or expose them to the governor. [The behavior of +the two drivers is different for ``<n>`` equal to ``0``. Adding +``intel_idle.max_cstate=0`` to the kernel command line disables the +``intel_idle`` driver and allows ``acpi_idle`` to be used, whereas +``processor.max_cstate=0`` is equivalent to ``processor.max_cstate=1``. +Also, the ``acpi_idle`` driver is part of the ``processor`` kernel module that +can be loaded separately and ``max_cstate=<n>`` can be passed to it as a module +parameter when it is loaded.] diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index ac6f5c597a56..ec0f7c111f65 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -495,7 +495,15 @@ on the following rules, regardless of the current operation mode of the driver: 2. Each individual CPU is affected by its own per-policy limits (that is, it cannot be requested to run faster than its own per-policy maximum and it - cannot be requested to run slower than its own per-policy minimum). + cannot be requested to run slower than its own per-policy minimum). The + effective performance depends on whether the platform supports per core + P-states, hyper-threading is enabled and on current performance requests + from other CPUs. When platform doesn't support per core P-states, the + effective performance can be more than the policy limits set on a CPU, if + other CPUs are requesting higher performance at that moment. Even with per + core P-states support, when hyper-threading is enabled, if the sibling CPU + is requesting higher performance, the other siblings will get higher + performance than their policy limits. 3. The global and per-policy limits can be set independently. diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst index fa01bf083dfe..b6cef9b5e961 100644 --- a/Documentation/admin-guide/pm/working-state.rst +++ b/Documentation/admin-guide/pm/working-state.rst @@ -5,5 +5,6 @@ Working-State Power Management .. toctree:: :maxdepth: 2 + cpuidle cpufreq intel_pstate diff --git a/Documentation/admin-guide/ras.rst b/Documentation/admin-guide/ras.rst index 197896718f81..c7495e42e6f4 100644 --- a/Documentation/admin-guide/ras.rst +++ b/Documentation/admin-guide/ras.rst @@ -54,7 +54,7 @@ those errors are correctable. Types of errors --------------- -Most mechanisms used on modern systems use use technologies like Hamming +Most mechanisms used on modern systems use technologies like Hamming Codes that allow error correction when the number of errors on a bit packet is below a threshold. If the number of errors is above, those mechanisms can indicate with a high degree of confidence that an error happened, but diff --git a/Documentation/admin-guide/security-bugs.rst b/Documentation/admin-guide/security-bugs.rst index 164bf71149fd..dcd6c93c7aac 100644 --- a/Documentation/admin-guide/security-bugs.rst +++ b/Documentation/admin-guide/security-bugs.rst @@ -32,18 +32,19 @@ Disclosure and embargoed information The security list is not a disclosure channel. For that, see Coordination below. -Once a robust fix has been developed, our preference is to release the -fix in a timely fashion, treating it no differently than any of the other -thousands of changes and fixes the Linux kernel project releases every -month. - -However, at the request of the reporter, we will postpone releasing the -fix for up to 5 business days after the date of the report or after the -embargo has lifted; whichever comes first. The only exception to that -rule is if the bug is publicly known, in which case the preference is to -release the fix as soon as it's available. - -Whilst embargoed information may be shared with trusted individuals in +Once a robust fix has been developed, the release process starts. Fixes +for publicly known bugs are released immediately. + +Although our preference is to release fixes for publicly undisclosed bugs +as soon as they become available, this may be postponed at the request of +the reporter or an affected party for up to 7 calendar days from the start +of the release process, with an exceptional extension to 14 calendar days +if it is agreed that the criticality of the bug requires more time. The +only valid reason for deferring the publication of a fix is to accommodate +the logistics of QA and large scale rollouts which require release +coordination. + +While embargoed information may be shared with trusted individuals in order to develop a fix, such information will not be published alongside the fix or on any other disclosure channel without the permission of the reporter. This includes but is not limited to the original bug report diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 35fccba6a9a6..898ad78f3cc7 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -133,6 +133,26 @@ If the user still wants to connect the device they can either approve the device without a key or write a new key and write 1 to the ``authorized`` file to get the new key stored on the device NVM. +DMA protection utilizing IOMMU +------------------------------ +Recent systems from 2018 and forward with Thunderbolt ports may natively +support IOMMU. This means that Thunderbolt security is handled by an IOMMU +so connected devices cannot access memory regions outside of what is +allocated for them by drivers. When Linux is running on such system it +automatically enables IOMMU if not enabled by the user already. These +systems can be identified by reading ``1`` from +``/sys/bus/thunderbolt/devices/domainX/iommu_dma_protection`` attribute. + +The driver does not do anything special in this case but because DMA +protection is handled by the IOMMU, security levels (if set) are +redundant. For this reason some systems ship with security level set to +``none``. Other systems have security level set to ``user`` in order to +support downgrade to older OS, so users who want to automatically +authorize devices when IOMMU DMA protection is enabled can use the +following ``udev`` rule:: + + ACTION=="add", SUBSYSTEM=="thunderbolt", ATTRS{iommu_dma_protection}=="1", ATTR{authorized}=="0", ATTR{authorized}="1" + Upgrading NVM on Thunderbolt device or host ------------------------------------------- Since most of the functionality is handled in firmware running on a diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 259f00af3ab3..f1f965ce93d6 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -126,7 +126,7 @@ tagged list. The boot loader must pass at a minimum the size and location of the system memory, and the root filesystem location. The dtb must be placed in a region of memory where the kernel decompressor will not -overwrite it, whilst remaining within the region which will be covered +overwrite it, while remaining within the region which will be covered by the kernel's low-memory mapping. A safe location is just above the 128MiB boundary from start of RAM. diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index 0ebd7e2244d0..e8f918b96123 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -55,7 +55,7 @@ out s3c2410 API, then here are some notes on the process. as they have the same arguments, and can either take the pin specific values, or the more generic special-function-number arguments. -3) s3c2410_gpio_pullup() changes have the problem that whilst the +3) s3c2410_gpio_pullup() changes have the problem that while the s3c2410_gpio_pullup(x, 1) can be easily translated to the s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0) are not so easy. diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 359587b2367b..00d3c3141e21 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -17,7 +17,7 @@ Introduction versions. The S3C2416 and S3C2450 devices are very similar and S3C2450 support is - included under the arch/arm/mach-s3c2416 directory. Note, whilst core + included under the arch/arm/mach-s3c2416 directory. Note, while core support for these SoCs is in, work on some of the extra peripherals and extra interrupts is still ongoing. diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt index 1ca63b3e5635..cb4f0c0cdf9d 100644 --- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt @@ -87,7 +87,7 @@ Debugging suspending, which means that use of printascii() or similar direct access to the UARTs will cause the debug to stop. - 2) Whilst the pm code itself will attempt to re-enable the UART clocks, + 2) While the pm code itself will attempt to re-enable the UART clocks, care should be taken that any external clock sources that the UARTs rely on are still enabled at that point. diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt index 8d0df62c3fe0..8df9f4658d6f 100644 --- a/Documentation/arm64/booting.txt +++ b/Documentation/arm64/booting.txt @@ -205,6 +205,14 @@ Before jumping into the kernel, the following conditions must be met: ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0. - The DT or ACPI tables must describe a GICv2 interrupt controller. + For CPUs with pointer authentication functionality: + - If EL3 is present: + SCR_EL3.APK (bit 16) must be initialised to 0b1 + SCR_EL3.API (bit 17) must be initialised to 0b1 + - If the kernel is entered at EL1: + HCR_EL2.APK (bit 40) must be initialised to 0b1 + HCR_EL2.API (bit 41) must be initialised to 0b1 + The requirements described above for CPU mode, caches, MMUs, architected timers, coherency and system registers apply to all CPUs. All CPUs must enter the kernel in the same exception level. diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt index 7964f03846b1..d4b4dd1fe786 100644 --- a/Documentation/arm64/cpu-feature-registers.txt +++ b/Documentation/arm64/cpu-feature-registers.txt @@ -184,12 +184,20 @@ infrastructure: x--------------------------------------------------x | Name | bits | visible | |--------------------------------------------------| + | GPI | [31-28] | y | + |--------------------------------------------------| + | GPA | [27-24] | y | + |--------------------------------------------------| | LRCPC | [23-20] | y | |--------------------------------------------------| | FCMA | [19-16] | y | |--------------------------------------------------| | JSCVT | [15-12] | y | |--------------------------------------------------| + | API | [11-8] | y | + |--------------------------------------------------| + | APA | [7-4] | y | + |--------------------------------------------------| | DPB | [3-0] | y | x--------------------------------------------------x diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt index ea819ae024dd..13d6691b37be 100644 --- a/Documentation/arm64/elf_hwcaps.txt +++ b/Documentation/arm64/elf_hwcaps.txt @@ -182,3 +182,15 @@ HWCAP_FLAGM HWCAP_SSBS Functionality implied by ID_AA64PFR1_EL1.SSBS == 0b0010. + +HWCAP_PACA + + Functionality implied by ID_AA64ISAR1_EL1.APA == 0b0001 or + ID_AA64ISAR1_EL1.API == 0b0001, as described by + Documentation/arm64/pointer-authentication.txt. + +HWCAP_PACG + + Functionality implied by ID_AA64ISAR1_EL1.GPA == 0b0001 or + ID_AA64ISAR1_EL1.GPI == 0b0001, as described by + Documentation/arm64/pointer-authentication.txt. diff --git a/Documentation/arm64/pointer-authentication.txt b/Documentation/arm64/pointer-authentication.txt new file mode 100644 index 000000000000..a25cd21290e9 --- /dev/null +++ b/Documentation/arm64/pointer-authentication.txt @@ -0,0 +1,88 @@ +Pointer authentication in AArch64 Linux +======================================= + +Author: Mark Rutland <mark.rutland@arm.com> +Date: 2017-07-19 + +This document briefly describes the provision of pointer authentication +functionality in AArch64 Linux. + + +Architecture overview +--------------------- + +The ARMv8.3 Pointer Authentication extension adds primitives that can be +used to mitigate certain classes of attack where an attacker can corrupt +the contents of some memory (e.g. the stack). + +The extension uses a Pointer Authentication Code (PAC) to determine +whether pointers have been modified unexpectedly. A PAC is derived from +a pointer, another value (such as the stack pointer), and a secret key +held in system registers. + +The extension adds instructions to insert a valid PAC into a pointer, +and to verify/remove the PAC from a pointer. The PAC occupies a number +of high-order bits of the pointer, which varies dependent on the +configured virtual address size and whether pointer tagging is in use. + +A subset of these instructions have been allocated from the HINT +encoding space. In the absence of the extension (or when disabled), +these instructions behave as NOPs. Applications and libraries using +these instructions operate correctly regardless of the presence of the +extension. + +The extension provides five separate keys to generate PACs - two for +instruction addresses (APIAKey, APIBKey), two for data addresses +(APDAKey, APDBKey), and one for generic authentication (APGAKey). + + +Basic support +------------- + +When CONFIG_ARM64_PTR_AUTH is selected, and relevant HW support is +present, the kernel will assign random key values to each process at +exec*() time. The keys are shared by all threads within the process, and +are preserved across fork(). + +Presence of address authentication functionality is advertised via +HWCAP_PACA, and generic authentication functionality via HWCAP_PACG. + +The number of bits that the PAC occupies in a pointer is 55 minus the +virtual address size configured by the kernel. For example, with a +virtual address size of 48, the PAC is 7 bits wide. + +Recent versions of GCC can compile code with APIAKey-based return +address protection when passed the -msign-return-address option. This +uses instructions in the HINT space (unless -march=armv8.3-a or higher +is also passed), and such code can run on systems without the pointer +authentication extension. + +In addition to exec(), keys can also be reinitialized to random values +using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY, +PR_PAC_APIBKEY, PR_PAC_APDAKEY, PR_PAC_APDBKEY and PR_PAC_APGAKEY +specifies which keys are to be reinitialized; specifying 0 means "all +keys". + + +Debugging +--------- + +When CONFIG_ARM64_PTR_AUTH is selected, and HW support for address +authentication is present, the kernel will expose the position of TTBR0 +PAC bits in the NT_ARM_PAC_MASK regset (struct user_pac_mask), which +userspace can acquire via PTRACE_GETREGSET. + +The regset is exposed only when HWCAP_PACA is set. Separate masks are +exposed for data pointers and instruction pointers, as the set of PAC +bits can vary between the two. Note that the masks apply to TTBR0 +addresses, and are not valid to apply to TTBR1 addresses (e.g. kernel +pointers). + + +Virtualization +-------------- + +Pointer authentication is not currently supported in KVM guests. KVM +will mask the feature bits from ID_AA64ISAR1_EL1, and attempted use of +the feature will result in an UNDEFINED exception being injected into +the guest. diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index 76ccded8b74c..1f09d043d086 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -57,6 +57,8 @@ stable kernels. | ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 | | ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 | | ARM | Cortex-A76 | #1188873 | ARM64_ERRATUM_1188873 | +| ARM | Cortex-A76 | #1165522 | ARM64_ERRATUM_1165522 | +| ARM | Cortex-A76 | #1286807 | ARM64_ERRATUM_1286807 | | ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 207eca58efaa..ac18b488cb5e 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -65,7 +65,6 @@ Description of Contents: 3.2.3 I/O completion 3.2.4 Implications for drivers that do not interpret bios (don't handle multiple segments) - 3.2.5 Request command tagging 3.3 I/O submission 4. The I/O scheduler 5. Scalability related changes @@ -708,93 +707,6 @@ is crossed on completion of a transfer. (The end*request* functions should be used if only if the request has come down from block/bio path, not for direct access requests which only specify rq->buffer without a valid rq->bio) -3.2.5 Generic request command tagging - -3.2.5.1 Tag helpers - -Block now offers some simple generic functionality to help support command -queueing (typically known as tagged command queueing), ie manage more than -one outstanding command on a queue at any given time. - - blk_queue_init_tags(struct request_queue *q, int depth) - - Initialize internal command tagging structures for a maximum - depth of 'depth'. - - blk_queue_free_tags((struct request_queue *q) - - Teardown tag info associated with the queue. This will be done - automatically by block if blk_queue_cleanup() is called on a queue - that is using tagging. - -The above are initialization and exit management, the main helpers during -normal operations are: - - blk_queue_start_tag(struct request_queue *q, struct request *rq) - - Start tagged operation for this request. A free tag number between - 0 and 'depth' is assigned to the request (rq->tag holds this number), - and 'rq' is added to the internal tag management. If the maximum depth - for this queue is already achieved (or if the tag wasn't started for - some other reason), 1 is returned. Otherwise 0 is returned. - - blk_queue_end_tag(struct request_queue *q, struct request *rq) - - End tagged operation on this request. 'rq' is removed from the internal - book keeping structures. - -To minimize struct request and queue overhead, the tag helpers utilize some -of the same request members that are used for normal request queue management. -This means that a request cannot both be an active tag and be on the queue -list at the same time. blk_queue_start_tag() will remove the request, but -the driver must remember to call blk_queue_end_tag() before signalling -completion of the request to the block layer. This means ending tag -operations before calling end_that_request_last()! For an example of a user -of these helpers, see the IDE tagged command queueing support. - -3.2.5.2 Tag info - -Some block functions exist to query current tag status or to go from a -tag number to the associated request. These are, in no particular order: - - blk_queue_tagged(q) - - Returns 1 if the queue 'q' is using tagging, 0 if not. - - blk_queue_tag_request(q, tag) - - Returns a pointer to the request associated with tag 'tag'. - - blk_queue_tag_depth(q) - - Return current queue depth. - - blk_queue_tag_queue(q) - - Returns 1 if the queue can accept a new queued command, 0 if we are - at the maximum depth already. - - blk_queue_rq_tagged(rq) - - Returns 1 if the request 'rq' is tagged. - -3.2.5.2 Internal structure - -Internally, block manages tags in the blk_queue_tag structure: - - struct blk_queue_tag { - struct request **tag_index; /* array or pointers to rq */ - unsigned long *tag_map; /* bitmap of free tags */ - struct list_head busy_list; /* fifo list of busy tags */ - int busy; /* queue depth */ - int max_depth; /* max queue depth */ - }; - -Most of the above is simple and straight forward, however busy_list may need -a bit of explaining. Normally we don't care too much about request ordering, -but in the event of any barrier requests in the tag queue we need to ensure -that requests are restarted in the order they were queue. - 3.3 I/O Submission The routine submit_bio() is used to submit a single io. Higher level i/o diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt deleted file mode 100644 index 895bd3813115..000000000000 --- a/Documentation/block/cfq-iosched.txt +++ /dev/null @@ -1,291 +0,0 @@ -CFQ (Complete Fairness Queueing) -=============================== - -The main aim of CFQ scheduler is to provide a fair allocation of the disk -I/O bandwidth for all the processes which requests an I/O operation. - -CFQ maintains the per process queue for the processes which request I/O -operation(synchronous requests). In case of asynchronous requests, all the -requests from all the processes are batched together according to their -process's I/O priority. - -CFQ ioscheduler tunables -======================== - -slice_idle ----------- -This specifies how long CFQ should idle for next request on certain cfq queues -(for sequential workloads) and service trees (for random workloads) before -queue is expired and CFQ selects next queue to dispatch from. - -By default slice_idle is a non-zero value. That means by default we idle on -queues/service trees. This can be very helpful on highly seeky media like -single spindle SATA/SAS disks where we can cut down on overall number of -seeks and see improved throughput. - -Setting slice_idle to 0 will remove all the idling on queues/service tree -level and one should see an overall improved throughput on faster storage -devices like multiple SATA/SAS disks in hardware RAID configuration. The down -side is that isolation provided from WRITES also goes down and notion of -IO priority becomes weaker. - -So depending on storage and workload, it might be useful to set slice_idle=0. -In general I think for SATA/SAS disks and software RAID of SATA/SAS disks -keeping slice_idle enabled should be useful. For any configurations where -there are multiple spindles behind single LUN (Host based hardware RAID -controller or for storage arrays), setting slice_idle=0 might end up in better -throughput and acceptable latencies. - -back_seek_max -------------- -This specifies, given in Kbytes, the maximum "distance" for backward seeking. -The distance is the amount of space from the current head location to the -sectors that are backward in terms of distance. - -This parameter allows the scheduler to anticipate requests in the "backward" -direction and consider them as being the "next" if they are within this -distance from the current head location. - -back_seek_penalty ------------------ -This parameter is used to compute the cost of backward seeking. If the -backward distance of request is just 1/back_seek_penalty from a "front" -request, then the seeking cost of two requests is considered equivalent. - -So scheduler will not bias toward one or the other request (otherwise scheduler -will bias toward front request). Default value of back_seek_penalty is 2. - -fifo_expire_async ------------------ -This parameter is used to set the timeout of asynchronous requests. Default -value of this is 248ms. - -fifo_expire_sync ----------------- -This parameter is used to set the timeout of synchronous requests. Default -value of this is 124ms. In case to favor synchronous requests over asynchronous -one, this value should be decreased relative to fifo_expire_async. - -group_idle ------------ -This parameter forces idling at the CFQ group level instead of CFQ -queue level. This was introduced after a bottleneck was observed -in higher end storage due to idle on sequential queue and allow dispatch -from a single queue. The idea with this parameter is that it can be run with -slice_idle=0 and group_idle=8, so that idling does not happen on individual -queues in the group but happens overall on the group and thus still keeps the -IO controller working. -Not idling on individual queues in the group will dispatch requests from -multiple queues in the group at the same time and achieve higher throughput -on higher end storage. - -Default value for this parameter is 8ms. - -low_latency ------------ -This parameter is used to enable/disable the low latency mode of the CFQ -scheduler. If enabled, CFQ tries to recompute the slice time for each process -based on the target_latency set for the system. This favors fairness over -throughput. Disabling low latency (setting it to 0) ignores target latency, -allowing each process in the system to get a full time slice. - -By default low latency mode is enabled. - -target_latency --------------- -This parameter is used to calculate the time slice for a process if cfq's -latency mode is enabled. It will ensure that sync requests have an estimated -latency. But if sequential workload is higher(e.g. sequential read), -then to meet the latency constraints, throughput may decrease because of less -time for each process to issue I/O request before the cfq queue is switched. - -Though this can be overcome by disabling the latency_mode, it may increase -the read latency for some applications. This parameter allows for changing -target_latency through the sysfs interface which can provide the balanced -throughput and read latency. - -Default value for target_latency is 300ms. - -slice_async ------------ -This parameter is same as of slice_sync but for asynchronous queue. The -default value is 40ms. - -slice_async_rq --------------- -This parameter is used to limit the dispatching of asynchronous request to -device request queue in queue's slice time. The maximum number of request that -are allowed to be dispatched also depends upon the io priority. Default value -for this is 2. - -slice_sync ----------- -When a queue is selected for execution, the queues IO requests are only -executed for a certain amount of time(time_slice) before switching to another -queue. This parameter is used to calculate the time slice of synchronous -queue. - -time_slice is computed using the below equation:- -time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the -time_slice of synchronous queue, increase the value of slice_sync. Default -value is 100ms. - -quantum -------- -This specifies the number of request dispatched to the device queue. In a -queue's time slice, a request will not be dispatched if the number of request -in the device exceeds this parameter. This parameter is used for synchronous -request. - -In case of storage with several disk, this setting can limit the parallel -processing of request. Therefore, increasing the value can improve the -performance although this can cause the latency of some I/O to increase due -to more number of requests. - -CFQ Group scheduling -==================== - -CFQ supports blkio cgroup and has "blkio." prefixed files in each -blkio cgroup directory. It is weight-based and there are four knobs -for configuration - weight[_device] and leaf_weight[_device]. -Internal cgroup nodes (the ones with children) can also have tasks in -them, so the former two configure how much proportion the cgroup as a -whole is entitled to at its parent's level while the latter two -configure how much proportion the tasks in the cgroup have compared to -its direct children. - -Another way to think about it is assuming that each internal node has -an implicit leaf child node which hosts all the tasks whose weight is -configured by leaf_weight[_device]. Let's assume a blkio hierarchy -composed of five cgroups - root, A, B, AA and AB - with the following -weights where the names represent the hierarchy. - - weight leaf_weight - root : 125 125 - A : 500 750 - B : 250 500 - AA : 500 500 - AB : 1000 500 - -root never has a parent making its weight is meaningless. For backward -compatibility, weight is always kept in sync with leaf_weight. B, AA -and AB have no child and thus its tasks have no children cgroup to -compete with. They always get 100% of what the cgroup won at the -parent level. Considering only the weights which matter, the hierarchy -looks like the following. - - root - / | \ - A B leaf - 500 250 125 - / | \ - AA AB leaf - 500 1000 750 - -If all cgroups have active IOs and competing with each other, disk -time will be distributed like the following. - -Distribution below root. The total active weight at this level is -A:500 + B:250 + C:125 = 875. - - root-leaf : 125 / 875 =~ 14% - A : 500 / 875 =~ 57% - B(-leaf) : 250 / 875 =~ 28% - -A has children and further distributes its 57% among the children and -the implicit leaf node. The total active weight at this level is -AA:500 + AB:1000 + A-leaf:750 = 2250. - - A-leaf : ( 750 / 2250) * A =~ 19% - AA(-leaf) : ( 500 / 2250) * A =~ 12% - AB(-leaf) : (1000 / 2250) * A =~ 25% - -CFQ IOPS Mode for group scheduling -=================================== -Basic CFQ design is to provide priority based time slices. Higher priority -process gets bigger time slice and lower priority process gets smaller time -slice. Measuring time becomes harder if storage is fast and supports NCQ and -it would be better to dispatch multiple requests from multiple cfq queues in -request queue at a time. In such scenario, it is not possible to measure time -consumed by single queue accurately. - -What is possible though is to measure number of requests dispatched from a -single queue and also allow dispatch from multiple cfq queue at the same time. -This effectively becomes the fairness in terms of IOPS (IO operations per -second). - -If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches -to IOPS mode and starts providing fairness in terms of number of requests -dispatched. Note that this mode switching takes effect only for group -scheduling. For non-cgroup users nothing should change. - -CFQ IO scheduler Idling Theory -=============================== -Idling on a queue is primarily about waiting for the next request to come -on same queue after completion of a request. In this process CFQ will not -dispatch requests from other cfq queues even if requests are pending there. - -The rationale behind idling is that it can cut down on number of seeks -on rotational media. For example, if a process is doing dependent -sequential reads (next read will come on only after completion of previous -one), then not dispatching request from other queue should help as we -did not move the disk head and kept on dispatching sequential IO from -one queue. - -CFQ has following service trees and various queues are put on these trees. - - sync-idle sync-noidle async - -All cfq queues doing synchronous sequential IO go on to sync-idle tree. -On this tree we idle on each queue individually. - -All synchronous non-sequential queues go on sync-noidle tree. Also any -synchronous write request which is not marked with REQ_IDLE goes on this -service tree. On this tree we do not idle on individual queues instead idle -on the whole group of queues or the tree. So if there are 4 queues waiting -for IO to dispatch we will idle only once last queue has dispatched the IO -and there is no more IO on this service tree. - -All async writes go on async service tree. There is no idling on async -queues. - -CFQ has some optimizations for SSDs and if it detects a non-rotational -media which can support higher queue depth (multiple requests at in -flight at a time), then it cuts down on idling of individual queues and -all the queues move to sync-noidle tree and only tree idle remains. This -tree idling provides isolation with buffered write queues on async tree. - -FAQ -=== -Q1. Why to idle at all on queues not marked with REQ_IDLE. - -A1. We only do tree idle (all queues on sync-noidle tree) on queues not marked - with REQ_IDLE. This helps in providing isolation with all the sync-idle - queues. Otherwise in presence of many sequential readers, other - synchronous IO might not get fair share of disk. - - For example, if there are 10 sequential readers doing IO and they get - 100ms each. If a !REQ_IDLE request comes in, it will be scheduled - roughly after 1 second. If after completion of !REQ_IDLE request we - do not idle, and after a couple of milli seconds a another !REQ_IDLE - request comes in, again it will be scheduled after 1second. Repeat it - and notice how a workload can lose its disk share and suffer due to - multiple sequential readers. - - fsync can generate dependent IO where bunch of data is written in the - context of fsync, and later some journaling data is written. Journaling - data comes in only after fsync has finished its IO (atleast for ext4 - that seemed to be the case). Now if one decides not to idle on fsync - thread due to !REQ_IDLE, then next journaling write will not get - scheduled for another second. A process doing small fsync, will suffer - badly in presence of multiple sequential readers. - - Hence doing tree idling on threads using !REQ_IDLE flag on requests - provides isolation from multiple sequential readers and at the same - time we do not idle on individual threads. - -Q2. When to specify REQ_IDLE -A2. I would think whenever one is doing synchronous write and expecting - more writes to be dispatched from same context soon, should be able - to specify REQ_IDLE on writes and that probably should work well for - most of the cases. diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 2c1e67058fd3..39e286d7afc9 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -64,7 +64,7 @@ guess, the kernel will put the process issuing IO to sleep for an amount of time, before entering a classic poll loop. This mode might be a little slower than pure classic polling, but it will be more efficient. If set to a value larger than 0, the kernel will put the process issuing -IO to sleep for this amont of microseconds before entering classic +IO to sleep for this amount of microseconds before entering classic polling. iostats (RW) @@ -194,4 +194,31 @@ blk-throttle makes decision based on the samplings. Lower time means cgroups have more smooth throughput, but higher CPU overhead. This exists only when CONFIG_BLK_DEV_THROTTLING_LOW is enabled. +zoned (RO) +---------- +This indicates if the device is a zoned block device and the zone model of the +device if it is indeed zoned. The possible values indicated by zoned are +"none" for regular block devices and "host-aware" or "host-managed" for zoned +block devices. The characteristics of host-aware and host-managed zoned block +devices are described in the ZBC (Zoned Block Commands) and ZAC +(Zoned Device ATA Command Set) standards. These standards also define the +"drive-managed" zone model. However, since drive-managed zoned block devices +do not support zone commands, they will be treated as regular block devices +and zoned will report "none". + +nr_zones (RO) +------------- +For zoned block devices (zoned attribute indicating "host-managed" or +"host-aware"), this indicates the total number of zones of the device. +This is always 0 for regular block devices. + +chunk_sectors (RO) +------------------ +This has different meaning depending on the type of the block device. +For a RAID device (dm-raid), chunk_sectors indicates the size in 512B sectors +of the RAID volume stripe segment. For a zoned block device, either host-aware +or host-managed, chunk_sectors indicates the size in 512B sectors of the zones +of the device, with the eventual exception of the last zone of the device which +may be smaller. + Jens Axboe <jens.axboe@oracle.com>, February 2009 diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 3c1b5ab54bc0..436c5e98e1b6 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -164,11 +164,14 @@ reset WO trigger device reset mem_used_max WO reset the `mem_used_max' counter (see later) mem_limit WO specifies the maximum amount of memory ZRAM can use to store the compressed data +writeback_limit WO specifies the maximum amount of write IO zram can + write out to backing device as 4KB unit max_comp_streams RW the number of possible concurrent compress operations comp_algorithm RW show and change the compression algorithm compact WO trigger memory compaction debug_stat RO this file is used for zram debugging purposes backing_dev RW set up backend storage for zram to write out +idle WO mark allocated slot as idle User space is advised to use the following files to read the device statistics. @@ -220,6 +223,17 @@ line of text and contains the following stats separated by whitespace: pages_compacted the number of pages freed during compaction huge_pages the number of incompressible pages +File /sys/block/zram<id>/bd_stat + +The stat file represents device's backing device statistics. It consists of +a single line of text and contains the following stats separated by whitespace: + bd_count size of data written in backing device. + Unit: 4K bytes + bd_reads the number of reads from backing device + Unit: 4K bytes + bd_writes the number of writes to backing device + Unit: 4K bytes + 9) Deactivate: swapoff /dev/zram0 umount /dev/zram1 @@ -237,11 +251,60 @@ line of text and contains the following stats separated by whitespace: = writeback -With incompressible pages, there is no memory saving with zram. -Instead, with CONFIG_ZRAM_WRITEBACK, zram can write incompressible page +With CONFIG_ZRAM_WRITEBACK, zram can write idle/incompressible page to backing storage rather than keeping it in memory. -User should set up backing device via /sys/block/zramX/backing_dev -before disksize setting. +To use the feature, admin should set up backing device via + + "echo /dev/sda5 > /sys/block/zramX/backing_dev" + +before disksize setting. It supports only partition at this moment. +If admin want to use incompressible page writeback, they could do via + + "echo huge > /sys/block/zramX/write" + +To use idle page writeback, first, user need to declare zram pages +as idle. + + "echo all > /sys/block/zramX/idle" + +From now on, any pages on zram are idle pages. The idle mark +will be removed until someone request access of the block. +IOW, unless there is access request, those pages are still idle pages. + +Admin can request writeback of those idle pages at right timing via + + "echo idle > /sys/block/zramX/writeback" + +With the command, zram writeback idle pages from memory to the storage. + +If there are lots of write IO with flash device, potentially, it has +flash wearout problem so that admin needs to design write limitation +to guarantee storage health for entire product life. +To overcome the concern, zram supports "writeback_limit". +The "writeback_limit"'s default value is 0 so that it doesn't limit +any writeback. If admin want to measure writeback count in a certain +period, he could know it via /sys/block/zram0/bd_stat's 3rd column. + +If admin want to limit writeback as per-day 400M, he could do it +like below. + + MB_SHIFT=20 + 4K_SHIFT=12 + echo $((400<<MB_SHIFT>>4K_SHIFT)) > \ + /sys/block/zram0/writeback_limit. + +If admin want to allow further write again, he could do it like below + + echo 0 > /sys/block/zram0/writeback_limit + +If admin want to see remaining writeback budget since he set, + + cat /sys/block/zram0/writeback_limit + +The writeback_limit count will reset whenever you reset zram(e.g., +system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of +writeback happened until you reset the zram to allocate extra writeback +budget in next setting is user's job. = memory tracking @@ -251,16 +314,17 @@ pages of the process with*pagemap. If you enable the feature, you could see block state via /sys/kernel/debug/zram/zram0/block_state". The output is as follows, - 300 75.033841 .wh - 301 63.806904 s.. - 302 63.806919 ..h + 300 75.033841 .wh. + 301 63.806904 s... + 302 63.806919 ..hi First column is zram's block index. Second column is access time since the system was booted Third column is state of the block. (s: same page w: written page to backing store -h: huge page) +h: huge page +i: idle page) First line of above example says 300th block is accessed at 75.033841sec and the block's state is huge so it is written back to the backing diff --git a/Documentation/core-api/assoc_array.rst b/Documentation/core-api/assoc_array.rst index 8231b915c939..792bbf9939e1 100644 --- a/Documentation/core-api/assoc_array.rst +++ b/Documentation/core-api/assoc_array.rst @@ -34,7 +34,7 @@ properties: 8. The array can iterated over. The objects will not necessarily come out in key order. -9. The array can be iterated over whilst it is being modified, provided the +9. The array can be iterated over while it is being modified, provided the RCU readlock is being held by the iterator. Note, however, under these circumstances, some objects may be seen more than once. If this is a problem, the iterator should lock against modification. Objects will not @@ -42,7 +42,7 @@ properties: 10. Objects in the array can be looked up by means of their index key. -11. Objects can be looked up whilst the array is being modified, provided the +11. Objects can be looked up while the array is being modified, provided the RCU readlock is being held by the thread doing the look up. The implementation uses a tree of 16-pointer nodes internally that are indexed @@ -273,7 +273,7 @@ The function will return ``0`` if successful and ``-ENOMEM`` if there wasn't enough memory. It is possible for other threads to iterate over or search the array under -the RCU read lock whilst this function is in progress. The caller should +the RCU read lock while this function is in progress. The caller should lock exclusively against other modifiers of the array. diff --git a/Documentation/core-api/memory-allocation.rst b/Documentation/core-api/memory-allocation.rst index f8bb9aa120c4..8954a88ff5b7 100644 --- a/Documentation/core-api/memory-allocation.rst +++ b/Documentation/core-api/memory-allocation.rst @@ -1,3 +1,5 @@ +.. _memory-allocation: + ======================= Memory Allocation Guide ======================= diff --git a/Documentation/core-api/mm-api.rst b/Documentation/core-api/mm-api.rst index 5ce1ec1dd066..aa8e54b85221 100644 --- a/Documentation/core-api/mm-api.rst +++ b/Documentation/core-api/mm-api.rst @@ -46,11 +46,20 @@ The Slab Cache .. kernel-doc:: mm/slab.c :export: +.. kernel-doc:: mm/slab_common.c + :export: + .. kernel-doc:: mm/util.c :functions: kfree_const kvmalloc_node kvfree -More Memory Management Functions -================================ +Virtually Contiguous Mappings +============================= + +.. kernel-doc:: mm/vmalloc.c + :export: + +File Mapping and Page Cache +=========================== .. kernel-doc:: mm/readahead.c :export: @@ -58,23 +67,28 @@ More Memory Management Functions .. kernel-doc:: mm/filemap.c :export: -.. kernel-doc:: mm/memory.c +.. kernel-doc:: mm/page-writeback.c :export: -.. kernel-doc:: mm/vmalloc.c +.. kernel-doc:: mm/truncate.c :export: -.. kernel-doc:: mm/page_alloc.c - :internal: +Memory pools +============ .. kernel-doc:: mm/mempool.c :export: +DMA pools +========= + .. kernel-doc:: mm/dmapool.c :export: -.. kernel-doc:: mm/page-writeback.c - :export: +More Memory Management Functions +================================ -.. kernel-doc:: mm/truncate.c +.. kernel-doc:: mm/memory.c :export: + +.. kernel-doc:: mm/page_alloc.c diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst index ff48b55040ef..a7fae4538946 100644 --- a/Documentation/core-api/printk-formats.rst +++ b/Documentation/core-api/printk-formats.rst @@ -412,6 +412,24 @@ Examples:: Passed by reference. +Time and date (struct rtc_time) +------------------------------- + +:: + + %ptR YYYY-mm-ddTHH:MM:SS + %ptRd YYYY-mm-dd + %ptRt HH:MM:SS + %ptR[dt][r] + +For printing date and time as represented by struct rtc_time structure in +human readable format. + +By default year will be incremented by 1900 and month by 1. Use %ptRr (raw) +to suppress this behaviour. + +Passed by reference. + struct clk ---------- diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index a4e705108f42..6a6d67acaf69 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -74,7 +74,8 @@ using :c:func:`xa_load`. xa_store will overwrite any entry with the new entry and return the previous entry stored at that index. You can use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a ``NULL`` entry. There is no difference between an entry that has never -been stored to and one that has most recently had ``NULL`` stored to it. +been stored to, one that has been erased and one that has most recently +had ``NULL`` stored to it. You can conditionally replace an entry at an index by using :c:func:`xa_cmpxchg`. Like :c:func:`cmpxchg`, it will only succeed if @@ -105,23 +106,44 @@ may result in the entry being marked at some, but not all of the other indices. Storing into one index may result in the entry retrieved by some, but not all of the other indices changing. +Sometimes you need to ensure that a subsequent call to :c:func:`xa_store` +will not need to allocate memory. The :c:func:`xa_reserve` function +will store a reserved entry at the indicated index. Users of the normal +API will see this entry as containing ``NULL``. If you do not need to +use the reserved entry, you can call :c:func:`xa_release` to remove the +unused entry. If another user has stored to the entry in the meantime, +:c:func:`xa_release` will do nothing; if instead you want the entry to +become ``NULL``, you should use :c:func:`xa_erase`. + +If all entries in the array are ``NULL``, the :c:func:`xa_empty` function +will return ``true``. + Finally, you can remove all entries from an XArray by calling :c:func:`xa_destroy`. If the XArray entries are pointers, you may wish to free the entries first. You can do this by iterating over all present entries in the XArray using the :c:func:`xa_for_each` iterator. -ID assignment -------------- +Allocating XArrays +------------------ + +If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or +initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +the XArray changes to track whether entries are in use or not. You can call :c:func:`xa_alloc` to store the entry at any unused index in the XArray. If you need to modify the array from interrupt context, you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable -interrupts while allocating the ID. Unlike :c:func:`xa_store`, allocating -a ``NULL`` pointer does not delete an entry. Instead it reserves an -entry like :c:func:`xa_reserve` and you can release it using either -:c:func:`xa_erase` or :c:func:`xa_release`. To use ID assignment, the -XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised -by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +interrupts while allocating the ID. + +Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert` +will mark the entry as being allocated. Unlike a normal XArray, storing +``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`. +To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if +you only want to free the entry if it's ``NULL``). + +You cannot use ``XA_MARK_0`` with an allocating XArray as this mark +is used to track whether an entry is free or not. The other marks are +available for your use. Memory allocation ----------------- @@ -158,15 +180,22 @@ Takes RCU read lock: Takes xa_lock internally: * :c:func:`xa_store` + * :c:func:`xa_store_bh` + * :c:func:`xa_store_irq` * :c:func:`xa_insert` * :c:func:`xa_erase` * :c:func:`xa_erase_bh` * :c:func:`xa_erase_irq` * :c:func:`xa_cmpxchg` + * :c:func:`xa_cmpxchg_bh` + * :c:func:`xa_cmpxchg_irq` * :c:func:`xa_store_range` * :c:func:`xa_alloc` * :c:func:`xa_alloc_bh` * :c:func:`xa_alloc_irq` + * :c:func:`xa_reserve` + * :c:func:`xa_reserve_bh` + * :c:func:`xa_reserve_irq` * :c:func:`xa_destroy` * :c:func:`xa_set_mark` * :c:func:`xa_clear_mark` @@ -177,6 +206,7 @@ Assumes xa_lock held on entry: * :c:func:`__xa_erase` * :c:func:`__xa_cmpxchg` * :c:func:`__xa_alloc` + * :c:func:`__xa_reserve` * :c:func:`__xa_set_mark` * :c:func:`__xa_clear_mark` @@ -234,7 +264,9 @@ Sharing the XArray with interrupt context is also possible, either using :c:func:`xa_lock_irqsave` in both the interrupt handler and process context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock` in the interrupt handler. Some of the more common patterns have helper -functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`. +functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`, +:c:func:`xa_erase_bh`, :c:func:`xa_erase_irq`, :c:func:`xa_cmpxchg_bh` +and :c:func:`xa_cmpxchg_irq`. Sometimes you need to protect access to the XArray with a mutex because that lock sits above another mutex in the locking hierarchy. That does @@ -322,7 +354,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``. - :c:func:`xa_is_zero` - Zero entries appear as ``NULL`` through the Normal API, but occupy an entry in the XArray which can be used to reserve the index for - future use. + future use. This is used by allocating XArrays for allocated entries + which are ``NULL``. Other internal entries may be added in the future. As far as possible, they will be handled by :c:func:`xas_retry`. diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt index a873855c811d..14378cecb172 100644 --- a/Documentation/cpu-freq/cpufreq-stats.txt +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -86,9 +86,11 @@ transitions. This will give a fine grained information about all the CPU frequency transitions. The cat output here is a two dimensional matrix, where an entry <i,j> (row i, column j) represents the count of number of transitions from -Freq_i to Freq_j. Freq_i is in descending order with increasing rows and -Freq_j is in descending order with increasing columns. The output here also -contains the actual freq values for each row and column for better readability. +Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in +which the driver has provided the frequency table initially to the cpufreq core +and so can be sorted (ascending or descending) or unsorted. The output here +also contains the actual freq values for each row and column for better +readability. If the transition table is bigger than PAGE_SIZE, reading this will return an -EFBIG error. diff --git a/Documentation/cpuidle/core.txt b/Documentation/cpuidle/core.txt deleted file mode 100644 index 63ecc5dc9d8a..000000000000 --- a/Documentation/cpuidle/core.txt +++ /dev/null @@ -1,23 +0,0 @@ - - Supporting multiple CPU idle levels in kernel - - cpuidle - -General Information: - -Various CPUs today support multiple idle levels that are differentiated -by varying exit latencies and power consumption during idle. -cpuidle is a generic in-kernel infrastructure that separates -idle policy (governor) from idle mechanism (driver) and provides a -standardized infrastructure to support independent development of -governors and drivers. - -cpuidle resides under drivers/cpuidle. - -Boot options: -"cpuidle_sysfs_switch" -enables current_governor interface in /sys/devices/system/cpu/cpuidle/, -which can be used to switch governors at run time. This boot option -is meant for developer testing only. In normal usage, kernel picks the -best governor based on governor ratings. -SEE ALSO: sysfs.txt in this directory. diff --git a/Documentation/cpuidle/sysfs.txt b/Documentation/cpuidle/sysfs.txt deleted file mode 100644 index d1587f434e7b..000000000000 --- a/Documentation/cpuidle/sysfs.txt +++ /dev/null @@ -1,98 +0,0 @@ - - - Supporting multiple CPU idle levels in kernel - - cpuidle sysfs - -System global cpuidle related information and tunables are under -/sys/devices/system/cpu/cpuidle - -The current interfaces in this directory has self-explanatory names: -* current_driver -* current_governor_ro - -With cpuidle_sysfs_switch boot option (meant for developer testing) -following objects are visible instead. -* current_driver -* available_governors -* current_governor -In this case users can switch the governor at run time by writing -to current_governor. - - -Per logical CPU specific cpuidle information are under -/sys/devices/system/cpu/cpuX/cpuidle -for each online cpu X - --------------------------------------------------------------------------------- -# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/ -/sys/devices/system/cpu/cpu0/cpuidle/: -total 0 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state0 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state1 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state2 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state3 - -/sys/devices/system/cpu/cpu0/cpuidle/state0: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state1: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state2: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state3: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage --------------------------------------------------------------------------------- - - -* desc : Small description about the idle state (string) -* disable : Option to disable this idle state (bool) -> see note below -* latency : Latency to exit out of this idle state (in microseconds) -* residency : Time after which a state becomes more effecient than any - shallower state (in microseconds) -* name : Name of the idle state (string) -* power : Power consumed while in this idle state (in milliwatts) -* time : Total time spent in this idle state (in microseconds) -* usage : Number of times this state was entered (count) - -Note: -The behavior and the effect of the disable variable depends on the -implementation of a particular governor. In the ladder governor, for -example, it is not coherent, i.e. if one is disabling a light state, -then all deeper states are disabled as well, but the disable variable -does not reflect it. Likewise, if one enables a deep state but a lighter -state still is disabled, then this has no effect. diff --git a/Documentation/crypto/api.rst b/Documentation/crypto/api.rst index 2e519193ab4a..b91b31736df8 100644 --- a/Documentation/crypto/api.rst +++ b/Documentation/crypto/api.rst @@ -1,15 +1,6 @@ Programming Interface ===================== -Please note that the kernel crypto API contains the AEAD givcrypt API -(crypto_aead_giv\* and aead_givcrypt\* function calls in -include/crypto/aead.h). This API is obsolete and will be removed in the -future. To obtain the functionality of an AEAD cipher with internal IV -generation, use the IV generator as a regular cipher. For example, -rfc4106(gcm(aes)) is the AEAD cipher with external IV generation and -seqniv(rfc4106(gcm(aes))) implies that the kernel crypto API generates -the IV. Different IV generators are available. - .. class:: toc-title Table of contents diff --git a/Documentation/crypto/architecture.rst b/Documentation/crypto/architecture.rst index ca2d09b991f5..ee8ff0762d7f 100644 --- a/Documentation/crypto/architecture.rst +++ b/Documentation/crypto/architecture.rst @@ -157,10 +157,6 @@ applicable to a cipher, it is not displayed: - rng for random number generator - - givcipher for cipher with associated IV generator (see the geniv - entry below for the specification of the IV generator type used by - the cipher implementation) - - kpp for a Key-agreement Protocol Primitive (KPP) cipher such as an ECDH or DH implementation @@ -174,16 +170,7 @@ applicable to a cipher, it is not displayed: - digestsize: output size of the message digest -- geniv: IV generation type: - - - eseqiv for encrypted sequence number based IV generation - - - seqiv for sequence number based IV generation - - - chainiv for chain iv generation - - - <builtin> is a marker that the cipher implements IV generation and - handling as it is specific to the given cipher +- geniv: IV generator (obsolete) Key Sizes --------- @@ -218,10 +205,6 @@ the aforementioned cipher types: - CRYPTO_ALG_TYPE_ABLKCIPHER Asynchronous multi-block cipher -- CRYPTO_ALG_TYPE_GIVCIPHER Asynchronous multi-block cipher packed - together with an IV generator (see geniv field in the /proc/crypto - listing for the known IV generators) - - CRYPTO_ALG_TYPE_KPP Key-agreement Protocol Primitive (KPP) such as an ECDH or DH implementation @@ -338,18 +321,14 @@ uses the API applicable to the cipher type specified for the block. The following call sequence is applicable when the IPSEC layer triggers an encryption operation with the esp_output function. During -configuration, the administrator set up the use of rfc4106(gcm(aes)) as -the cipher for ESP. The following call sequence is now depicted in the -ASCII art above: +configuration, the administrator set up the use of seqiv(rfc4106(gcm(aes))) +as the cipher for ESP. The following call sequence is now depicted in +the ASCII art above: 1. esp_output() invokes crypto_aead_encrypt() to trigger an encryption operation of the AEAD cipher with IV generator. - In case of GCM, the SEQIV implementation is registered as GIVCIPHER - in crypto_rfc4106_alloc(). - - The SEQIV performs its operation to generate an IV where the core - function is seqiv_geniv(). + The SEQIV generates the IV. 2. Now, SEQIV uses the AEAD API function calls to invoke the associated AEAD cipher. In our case, during the instantiation of SEQIV, the diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst index aa14f05cabb1..00a3409b0c28 100644 --- a/Documentation/dev-tools/coccinelle.rst +++ b/Documentation/dev-tools/coccinelle.rst @@ -4,6 +4,8 @@ .. highlight:: none +.. _devtools_coccinelle: + Coccinelle ========== diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst index e313925fb0fa..b0522a4dd107 100644 --- a/Documentation/dev-tools/index.rst +++ b/Documentation/dev-tools/index.rst @@ -3,8 +3,8 @@ Development tools for the kernel ================================ This document is a collection of documents about development tools that can -be used to work on the kernel. For now, the documents have been pulled -together without any significant effot to integrate them into a coherent +be used to work on the kernel. For now, the documents have been pulled +together without any significant effort to integrate them into a coherent whole; patches welcome! .. class:: toc-title diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index aabc8738b3d8..b72d07d70239 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -4,15 +4,25 @@ The Kernel Address Sanitizer (KASAN) Overview -------- -KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides -a fast and comprehensive solution for finding use-after-free and out-of-bounds -bugs. +KernelAddressSANitizer (KASAN) is a dynamic memory error detector designed to +find out-of-bound and use-after-free bugs. KASAN has two modes: generic KASAN +(similar to userspace ASan) and software tag-based KASAN (similar to userspace +HWASan). -KASAN uses compile-time instrumentation for checking every memory access, -therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is -required for detection of out-of-bounds accesses to stack or global variables. +KASAN uses compile-time instrumentation to insert validity checks before every +memory access, and therefore requires a compiler version that supports that. -Currently KASAN is supported only for the x86_64 and arm64 architectures. +Generic KASAN is supported in both GCC and Clang. With GCC it requires version +4.9.2 or later for basic support and version 5.0 or later for detection of +out-of-bounds accesses for stack and global variables and for inline +instrumentation mode (see the Usage section). With Clang it requires version +7.0.0 or later and it doesn't support detection of out-of-bounds accesses for +global variables yet. + +Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later. + +Currently generic KASAN is supported for the x86_64, arm64, xtensa and s390 +architectures, and tag-based KASAN is supported only for arm64. Usage ----- @@ -21,12 +31,14 @@ To enable KASAN configure kernel with:: CONFIG_KASAN = y -and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and -inline are compiler instrumentation types. The former produces smaller binary -the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC -version 5.0 or later. +and choose between CONFIG_KASAN_GENERIC (to enable generic KASAN) and +CONFIG_KASAN_SW_TAGS (to enable software tag-based KASAN). + +You also need to choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. +Outline and inline are compiler instrumentation types. The former produces +smaller binary while the latter is 1.1 - 2 times faster. -KASAN works with both SLUB and SLAB memory allocators. +Both KASAN modes work with both SLUB and SLAB memory allocators. For better bug detection and nicer reporting, enable CONFIG_STACKTRACE. To disable instrumentation for specific files or directories, add a line @@ -43,85 +55,85 @@ similar to the following to the respective kernel Makefile: Error reports ~~~~~~~~~~~~~ -A typical out of bounds access report looks like this:: +A typical out-of-bounds access generic KASAN report looks like this:: ================================================================== - BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3 - Write of size 1 by task modprobe/1689 - ============================================================================= - BUG kmalloc-128 (Not tainted): kasan error - ----------------------------------------------------------------------------- - - Disabling lock debugging due to kernel taint - INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689 - __slab_alloc+0x4b4/0x4f0 - kmem_cache_alloc_trace+0x10b/0x190 - kmalloc_oob_right+0x3d/0x75 [test_kasan] - init_module+0x9/0x47 [test_kasan] - do_one_initcall+0x99/0x200 - load_module+0x2cb3/0x3b20 - SyS_finit_module+0x76/0x80 - system_call_fastpath+0x12/0x17 - INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080 - INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720 - - Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ - Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. - Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc ........ - Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ - CPU: 0 PID: 1689 Comm: modprobe Tainted: G B 3.18.0-rc1-mm1+ #98 - Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 - ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78 - ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8 - ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558 + BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan] + Write of size 1 at addr ffff8801f44ec37b by task insmod/2760 + + CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698 + Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: - [<ffffffff81cc68ae>] dump_stack+0x46/0x58 - [<ffffffff811fd848>] print_trailer+0xf8/0x160 - [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan] - [<ffffffff811ff0f5>] object_err+0x35/0x40 - [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan] - [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0 - [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40 - [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40 - [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40 - [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan] - [<ffffffff8120a995>] __asan_store1+0x75/0xb0 - [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan] - [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan] - [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan] - [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan] - [<ffffffff810002d9>] do_one_initcall+0x99/0x200 - [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160 - [<ffffffff81114f63>] load_module+0x2cb3/0x3b20 - [<ffffffff8110fd70>] ? m_show+0x240/0x240 - [<ffffffff81115f06>] SyS_finit_module+0x76/0x80 - [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17 + dump_stack+0x94/0xd8 + print_address_description+0x73/0x280 + kasan_report+0x144/0x187 + __asan_report_store1_noabort+0x17/0x20 + kmalloc_oob_right+0xa8/0xbc [test_kasan] + kmalloc_tests_init+0x16/0x700 [test_kasan] + do_one_initcall+0xa5/0x3ae + do_init_module+0x1b6/0x547 + load_module+0x75df/0x8070 + __do_sys_init_module+0x1c6/0x200 + __x64_sys_init_module+0x6e/0xb0 + do_syscall_64+0x9f/0x2c0 + entry_SYSCALL_64_after_hwframe+0x44/0xa9 + RIP: 0033:0x7f96443109da + RSP: 002b:00007ffcf0b51b08 EFLAGS: 00000202 ORIG_RAX: 00000000000000af + RAX: ffffffffffffffda RBX: 000055dc3ee521a0 RCX: 00007f96443109da + RDX: 00007f96445cff88 RSI: 0000000000057a50 RDI: 00007f9644992000 + RBP: 000055dc3ee510b0 R08: 0000000000000003 R09: 0000000000000000 + R10: 00007f964430cd0a R11: 0000000000000202 R12: 00007f96445cff88 + R13: 000055dc3ee51090 R14: 0000000000000000 R15: 0000000000000000 + + Allocated by task 2760: + save_stack+0x43/0xd0 + kasan_kmalloc+0xa7/0xd0 + kmem_cache_alloc_trace+0xe1/0x1b0 + kmalloc_oob_right+0x56/0xbc [test_kasan] + kmalloc_tests_init+0x16/0x700 [test_kasan] + do_one_initcall+0xa5/0x3ae + do_init_module+0x1b6/0x547 + load_module+0x75df/0x8070 + __do_sys_init_module+0x1c6/0x200 + __x64_sys_init_module+0x6e/0xb0 + do_syscall_64+0x9f/0x2c0 + entry_SYSCALL_64_after_hwframe+0x44/0xa9 + + Freed by task 815: + save_stack+0x43/0xd0 + __kasan_slab_free+0x135/0x190 + kasan_slab_free+0xe/0x10 + kfree+0x93/0x1a0 + umh_complete+0x6a/0xa0 + call_usermodehelper_exec_async+0x4c3/0x640 + ret_from_fork+0x35/0x40 + + The buggy address belongs to the object at ffff8801f44ec300 + which belongs to the cache kmalloc-128 of size 128 + The buggy address is located 123 bytes inside of + 128-byte region [ffff8801f44ec300, ffff8801f44ec380) + The buggy address belongs to the page: + page:ffffea0007d13b00 count:1 mapcount:0 mapping:ffff8801f7001640 index:0x0 + flags: 0x200000000000100(slab) + raw: 0200000000000100 ffffea0007d11dc0 0000001a0000001a ffff8801f7001640 + raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 + page dumped because: kasan: bad access detected + Memory state around the buggy address: - ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc - ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00 - >ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc - ^ - ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb - ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb - ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb + ffff8801f44ec200: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb + ffff8801f44ec280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc + >ffff8801f44ec300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 + ^ + ffff8801f44ec380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb + ffff8801f44ec400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== -The header of the report discribe what kind of bug happened and what kind of -access caused it. It's followed by the description of the accessed slub object -(see 'SLUB Debug output' section in Documentation/vm/slub.rst for details) and -the description of the accessed memory page. +The header of the report provides a short summary of what kind of bug happened +and what kind of access caused it. It's followed by a stack trace of the bad +access, a stack trace of where the accessed memory was allocated (in case bad +access happens on a slab object), and a stack trace of where the object was +freed (in case of a use-after-free bug report). Next comes a description of +the accessed slab object and information about the accessed memory page. In the last section the report shows memory state around the accessed address. Reading this part requires some understanding of how KASAN works. @@ -138,18 +150,24 @@ inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h). In the report above the arrows point to the shadow byte 03, which means that the accessed address is partially accessible. +For tag-based KASAN this last report section shows the memory tags around the +accessed address (see Implementation details section). + Implementation details ---------------------- +Generic KASAN +~~~~~~~~~~~~~ + From a high level, our approach to memory error detection is similar to that of kmemcheck: use shadow memory to record whether each byte of memory is safe -to access, and use compile-time instrumentation to check shadow memory on each -memory access. +to access, and use compile-time instrumentation to insert checks of shadow +memory on each memory access. -AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory -(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and -offset to translate a memory address to its corresponding shadow address. +Generic KASAN dedicates 1/8th of kernel memory to its shadow memory (e.g. 16TB +to cover 128TB on x86_64) and uses direct mapping with a scale and offset to +translate a memory address to its corresponding shadow address. Here is the function which translates an address to its corresponding shadow address:: @@ -162,12 +180,38 @@ address:: where ``KASAN_SHADOW_SCALE_SHIFT = 3``. -Compile-time instrumentation used for checking memory accesses. Compiler inserts -function calls (__asan_load*(addr), __asan_store*(addr)) before each memory -access of size 1, 2, 4, 8 or 16. These functions check whether memory access is -valid or not by checking corresponding shadow memory. +Compile-time instrumentation is used to insert memory access checks. Compiler +inserts function calls (__asan_load*(addr), __asan_store*(addr)) before each +memory access of size 1, 2, 4, 8 or 16. These functions check whether memory +access is valid or not by checking corresponding shadow memory. GCC 5.0 has possibility to perform inline instrumentation. Instead of making function calls GCC directly inserts the code to check the shadow memory. This option significantly enlarges kernel but it gives x1.1-x2 performance boost over outline instrumented kernel. + +Software tag-based KASAN +~~~~~~~~~~~~~~~~~~~~~~~~ + +Tag-based KASAN uses the Top Byte Ignore (TBI) feature of modern arm64 CPUs to +store a pointer tag in the top byte of kernel pointers. Like generic KASAN it +uses shadow memory to store memory tags associated with each 16-byte memory +cell (therefore it dedicates 1/16th of the kernel memory for shadow memory). + +On each memory allocation tag-based KASAN generates a random tag, tags the +allocated memory with this tag, and embeds this tag into the returned pointer. +Software tag-based KASAN uses compile-time instrumentation to insert checks +before each memory access. These checks make sure that tag of the memory that +is being accessed is equal to tag of the pointer that is used to access this +memory. In case of a tag mismatch tag-based KASAN prints a bug report. + +Software tag-based KASAN also has two instrumentation modes (outline, that +emits callbacks to check memory accesses; and inline, that performs the shadow +memory checks inline). With outline instrumentation mode, a bug report is +simply printed from the function that performs the access check. With inline +instrumentation a brk instruction is emitted by the compiler, and a dedicated +brk handler is used to print bug reports. + +A potential expansion of this mode is a hardware tag-based mode, which would +use hardware memory tagging support instead of compiler instrumentation and +manual shadow memory manipulation. diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index dad1bb8711e2..7756f7a7c23b 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -9,7 +9,7 @@ and booting a kernel. On some systems, hot-plug tests could hang forever waiting for cpu and memory to be ready to be offlined. A special hot-plug target is created -to run full range of hot-plug tests. In default mode, hot-plug tests run +to run the full range of hot-plug tests. In default mode, hot-plug tests run in safe mode with a limited scope. In limited mode, cpu-hotplug test is run on a single cpu as opposed to all hotplug capable cpus, and memory hotplug test is run on 2% of hotplug capable memory instead of 10%. @@ -89,9 +89,9 @@ Note that some tests will require root privileges. Install selftests ================= -You can use kselftest_install.sh tool installs selftests in default -location which is tools/testing/selftests/kselftest or a user specified -location. +You can use the kselftest_install.sh tool to install selftests in the +default location, which is tools/testing/selftests/kselftest, or in a +user specified location. To install selftests in default location:: @@ -109,7 +109,7 @@ Running installed selftests Kselftest install as well as the Kselftest tarball provide a script named "run_kselftest.sh" to run the tests. -You can simply do the following to run the installed Kselftests. Please +You can simply do the following to run the installed Kselftests. Please note some tests will require root privileges:: $ cd kselftest @@ -139,7 +139,7 @@ Contributing new tests (details) default. TEST_CUSTOM_PROGS should be used by tests that require custom build - rule and prevent common build rule use. + rules and prevent common build rule use. TEST_PROGS are for test shell scripts. Please ensure shell script has its exec bit set. Otherwise, lib.mk run_tests will generate a warning. diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 52a719b49afd..2355bef14653 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -146,7 +146,7 @@ The target is named "raid" and it accepts the following parameters: [data_offset <sectors>] This option value defines the offset into each data device where the data starts. This is used to provide out-of-place - reshaping space to avoid writing over data whilst + reshaping space to avoid writing over data while changing the layout of stripes, hence an interruption/crash may happen at any time without the risk of losing data. E.g. when adding devices to an existing raid set during diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore new file mode 100644 index 000000000000..ef82fcfcccab --- /dev/null +++ b/Documentation/devicetree/bindings/.gitignore @@ -0,0 +1,2 @@ +*.example.dts +processed-schema.yaml diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile new file mode 100644 index 000000000000..6e5cef0ed6fb --- /dev/null +++ b/Documentation/devicetree/bindings/Makefile @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +DT_DOC_CHECKER ?= dt-doc-validate +DT_EXTRACT_EX ?= dt-extract-example +DT_MK_SCHEMA ?= dt-mk-schema +DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u) + +quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) + cmd_chk_binding = $(DT_DOC_CHECKER) $< ; \ + $(DT_EXTRACT_EX) $< > $@ + +$(obj)/%.example.dts: $(src)/%.yaml FORCE + $(call if_changed,chk_binding) + +DT_TMP_SCHEMA := processed-schema.yaml +extra-y += $(DT_TMP_SCHEMA) + +quiet_cmd_mk_schema = SCHEMA $@ + cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^) + +DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml') +DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS)) + +extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) +extra-y += $(patsubst $(src)/%.yaml,%.example.dtb, $(DT_SCHEMA_FILES)) + +$(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE + $(call if_changed,mk_schema) diff --git a/Documentation/devicetree/bindings/arm/altera.txt b/Documentation/devicetree/bindings/arm/altera.txt deleted file mode 100644 index 558735aacca8..000000000000 --- a/Documentation/devicetree/bindings/arm/altera.txt +++ /dev/null @@ -1,14 +0,0 @@ -Altera's SoCFPGA platform device tree bindings ---------------------------------------------- - -Boards with Cyclone 5 SoC: -Required root node properties: -compatible = "altr,socfpga-cyclone5", "altr,socfpga"; - -Boards with Arria 5 SoC: -Required root node properties: -compatible = "altr,socfpga-arria5", "altr,socfpga"; - -Boards with Arria 10 SoC: -Required root node properties: -compatible = "altr,socfpga-arria10", "altr,socfpga"; diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml new file mode 100644 index 000000000000..49e0362ddc11 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/altera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera's SoCFPGA platform device tree bindings + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + items: + - enum: + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 + - const: altr,socfpga +... diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt deleted file mode 100644 index 2c28f1d12f45..000000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt +++ /dev/null @@ -1,11 +0,0 @@ -Altera SOCFPGA Clock Manager - -Required properties: -- compatible : "altr,clk-mgr" -- reg : Should contain base address and length for Clock Manager - -Example: - clkmgr@ffd04000 { - compatible = "altr,clk-mgr"; - reg = <0xffd04000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml new file mode 100644 index 000000000000..e4131fa42b26 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/altera/socfpga-clk-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA Clock Manager + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: test + +properties: + compatible: + items: + - const: altr,clk-mgr + reg: + maxItems: 1 + +required: + - compatible + +examples: + - | + clkmgr@ffd04000 { + compatible = "altr,clk-mgr"; + reg = <0xffd04000 0x1000>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt index 7b9a861e9306..5ab59da052df 100644 --- a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt +++ b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt @@ -17,4 +17,11 @@ Required sub-node properties: - compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared memory on Amlogic GXBB SoC. +Sensor bindings for the sensors based on SCPI Message Protocol +-------------------------------------------------------------- +SCPI provides an API to access the various sensors on the SoC. + +Required properties: +- compatible : should be "amlogic,meson-gxbb-scpi-sensors". + [0] Documentation/devicetree/bindings/arm/arm,scpi.txt diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 4498292b833d..8dbc259081e4 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -91,8 +91,10 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "phicomm,n1" (Meson gxl s905d) - "amlogic,p241" (Meson gxl s805x) + - "libretech,aml-s805x-ac" (Meson gxl s805x) - "amlogic,p281" (Meson gxl s905w) - "oranth,tx3-mini" (Meson gxl s905w) diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 4b96608ad692..14f319f694b7 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -158,14 +158,24 @@ Security Module (SECUMOD) The Security Module macrocell provides all necessary secure functions to avoid voltage, temperature, frequency and mechanical attacks on the chip. It also -embeds secure memories that can be scrambled +embeds secure memories that can be scrambled. + +The Security Module also offers the PIOBU pins which can be used as GPIO pins. +Note that they maintain their voltage during Backup/Self-refresh. required properties: - compatible: Should be "atmel,<chip>-secumod", "syscon". <chip> can be "sama5d2". - reg: Should contain registers location and length +- gpio-controller: Marks the port as GPIO controller. +- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. + secumod@fc040000 { compatible = "atmel,sama5d2-secumod", "syscon"; reg = <0xfc040000 0x100>; + gpio-controller; + #gpio-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt deleted file mode 100644 index 25fcf96795ca..000000000000 --- a/Documentation/devicetree/bindings/arm/calxeda.txt +++ /dev/null @@ -1,15 +0,0 @@ -Calxeda Platforms Device Tree Bindings ------------------------------------------------ - -Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the -following properties. - -Required root node properties: - - compatible = "calxeda,highbank"; - - -Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following -properties. - -Required root node properties: - - compatible = "calxeda,ecx-2000"; diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml new file mode 100644 index 000000000000..aa5571d23c39 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/calxeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Platforms Device Tree Bindings + +maintainers: + - Rob Herring <robh@kernel.org> +description: |+ + Bindings for boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC + or Cortex-A15 based ECX-2000 SOCs + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - calxeda,highbank + - calxeda,ecx-2000 diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt deleted file mode 100644 index b0198a1cf403..000000000000 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ /dev/null @@ -1,490 +0,0 @@ -================= -ARM CPUs bindings -================= - -The device tree allows to describe the layout of CPUs in a system through -the "cpus" node, which in turn contains a number of subnodes (ie "cpu") -defining properties for every cpu. - -Bindings for CPU nodes follow the Devicetree Specification, available from: - -https://www.devicetree.org/specifications/ - -with updates for 32-bit and 64-bit ARM systems provided in this document. - -================================ -Convention used in this document -================================ - -This document follows the conventions described in the Devicetree -Specification, with the addition: - -- square brackets define bitfields, eg reg[7:0] value of the bitfield in - the reg property contained in bits 7 down to 0 - -===================================== -cpus and cpu node bindings definition -===================================== - -The ARM architecture, in accordance with the Devicetree Specification, -requires the cpus and cpu nodes to be present and contain the properties -described below. - -- cpus node - - Description: Container of cpu nodes - - The node name must be "cpus". - - A cpus node must define the following properties: - - - #address-cells - Usage: required - Value type: <u32> - - Definition depends on ARM architecture version and - configuration: - - # On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - # On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - # On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - #size-cells - Usage: required - Value type: <u32> - Definition: must be set to 0 - -- cpu node - - Description: Describes a CPU in an ARM based system - - PROPERTIES - - - device_type - Usage: required - Value type: <string> - Definition: must be "cpu" - - reg - Usage and definition depend on ARM architecture version and - configuration: - - # On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - # On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - # On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - # On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. - - * If cpus node's #address-cells property is set to 2 - - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. - - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. - - * If cpus node's #address-cells property is set to 1 - - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. - - All other bits in the reg cells must be set to 0. - - - compatible: - Usage: required - Value type: <string> - Definition: should be one of: - "arm,arm710t" - "arm,arm720t" - "arm,arm740t" - "arm,arm7ej-s" - "arm,arm7tdmi" - "arm,arm7tdmi-s" - "arm,arm9es" - "arm,arm9ej-s" - "arm,arm920t" - "arm,arm922t" - "arm,arm925" - "arm,arm926e-s" - "arm,arm926ej-s" - "arm,arm940t" - "arm,arm946e-s" - "arm,arm966e-s" - "arm,arm968e-s" - "arm,arm9tdmi" - "arm,arm1020e" - "arm,arm1020t" - "arm,arm1022e" - "arm,arm1026ej-s" - "arm,arm1136j-s" - "arm,arm1136jf-s" - "arm,arm1156t2-s" - "arm,arm1156t2f-s" - "arm,arm1176jzf" - "arm,arm1176jz-s" - "arm,arm1176jzf-s" - "arm,arm11mpcore" - "arm,cortex-a5" - "arm,cortex-a7" - "arm,cortex-a8" - "arm,cortex-a9" - "arm,cortex-a12" - "arm,cortex-a15" - "arm,cortex-a17" - "arm,cortex-a53" - "arm,cortex-a57" - "arm,cortex-a72" - "arm,cortex-a73" - "arm,cortex-m0" - "arm,cortex-m0+" - "arm,cortex-m1" - "arm,cortex-m3" - "arm,cortex-m4" - "arm,cortex-r4" - "arm,cortex-r5" - "arm,cortex-r7" - "brcm,brahma-b15" - "brcm,brahma-b53" - "brcm,vulcan" - "cavium,thunder" - "cavium,thunder2" - "faraday,fa526" - "intel,sa110" - "intel,sa1100" - "marvell,feroceon" - "marvell,mohawk" - "marvell,pj4a" - "marvell,pj4b" - "marvell,sheeva-v5" - "nvidia,tegra132-denver" - "nvidia,tegra186-denver" - "nvidia,tegra194-carmel" - "qcom,krait" - "qcom,kryo" - "qcom,kryo385" - "qcom,scorpion" - - enable-method - Value type: <stringlist> - Usage and definition depend on ARM architecture version. - # On ARM v8 64-bit this property is required and must - be one of: - "psci" - "spin-table" - # On ARM 32-bit systems this property is optional and - can be one of: - "actions,s500-smp" - "allwinner,sun6i-a31" - "allwinner,sun8i-a23" - "allwinner,sun9i-a80-smp" - "amlogic,meson8-smp" - "amlogic,meson8b-smp" - "arm,realview-smp" - "brcm,bcm11351-cpu-method" - "brcm,bcm23550" - "brcm,bcm2836-smp" - "brcm,bcm-nsp-smp" - "brcm,brahma-b15" - "marvell,armada-375-smp" - "marvell,armada-380-smp" - "marvell,armada-390-smp" - "marvell,armada-xp-smp" - "marvell,98dx3236-smp" - "mediatek,mt6589-smp" - "mediatek,mt81xx-tz-smp" - "qcom,gcc-msm8660" - "qcom,kpss-acc-v1" - "qcom,kpss-acc-v2" - "renesas,apmu" - "renesas,r9a06g032-smp" - "rockchip,rk3036-smp" - "rockchip,rk3066-smp" - "ste,dbx500-smp" - - - cpu-release-addr - Usage: required for systems that have an "enable-method" - property value of "spin-table". - Value type: <prop-encoded-array> - Definition: - # On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - - qcom,saw - Usage: required for systems that have an "enable-method" - property value of "qcom,kpss-acc-v1" or - "qcom,kpss-acc-v2" - Value type: <phandle> - Definition: Specifies the SAW[1] node associated with this CPU. - - - qcom,acc - Usage: required for systems that have an "enable-method" - property value of "qcom,kpss-acc-v1" or - "qcom,kpss-acc-v2" - Value type: <phandle> - Definition: Specifies the ACC[2] node associated with this CPU. - - - cpu-idle-states - Usage: Optional - Value type: <prop-encoded-array> - Definition: - # List of phandles to idle state nodes supported - by this cpu [3]. - - - capacity-dmips-mhz - Usage: Optional - Value type: <u32> - Definition: - # u32 value representing CPU capacity [4] in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - - rockchip,pmu - Usage: optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - Value type: <phandle> - Definition: Specifies the syscon node controlling the cpu core - power domains. - - - dynamic-power-coefficient - Usage: optional - Value type: <prop-encoded-array> - Definition: A u32 value that represents the running time dynamic - power coefficient in units of uW/MHz/V^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in V, frequency is in MHz. - -Example 1 (dual-cluster big.LITTLE system 32-bit): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - }; - }; - -Example 2 (Cortex-A8 uniprocessor 32-bit system): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - }; - }; - -Example 3 (ARM 926EJ-S uniprocessor 32-bit system): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - reg = <0x0>; - }; - }; - -Example 4 (ARM Cortex-A57 64-bit system): - -cpus { - #size-cells = <0>; - #address-cells = <2>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; -}; - --- -[1] arm/msm/qcom,saw2.txt -[2] arm/msm/qcom,kpss-acc.txt -[3] ARM Linux kernel documentation - idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[4] ARM Linux kernel documentation - cpu capacity bindings - Documentation/devicetree/bindings/arm/cpu-capacity.txt diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml new file mode 100644 index 000000000000..298c17b327c6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -0,0 +1,507 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM CPUs bindings + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + The device tree allows to describe the layout of CPUs in a system through + the "cpus" node, which in turn contains a number of subnodes (ie "cpu") + defining properties for every cpu. + + Bindings for CPU nodes follow the Devicetree Specification, available from: + + https://www.devicetree.org/specifications/ + + with updates for 32-bit and 64-bit ARM systems provided in this document. + + ================================ + Convention used in this document + ================================ + + This document follows the conventions described in the Devicetree + Specification, with the addition: + + - square brackets define bitfields, eg reg[7:0] value of the bitfield in + the reg property contained in bits 7 down to 0 + + ===================================== + cpus and cpu node bindings definition + ===================================== + + The ARM architecture, in accordance with the Devicetree Specification, + requires the cpus and cpu nodes to be present and contain the properties + described below. + +properties: + $nodename: + const: cpus + description: Container of cpu nodes + + '#address-cells': + enum: [1, 2] + description: | + Definition depends on ARM architecture version and configuration: + + On uniprocessor ARM architectures previous to v7 + value must be 1, to enable a simple enumeration + scheme for processors that do not have a HW CPU + identification register. + On 32-bit ARM 11 MPcore, ARM v7 or later systems + value must be 1, that corresponds to CPUID/MPIDR + registers sizes. + On ARM v8 64-bit systems value should be set to 2, + that corresponds to the MPIDR_EL1 register size. + If MPIDR_EL1[63:32] value is equal to 0 on all CPUs + in the system, #address-cells can be set to 1, since + MPIDR_EL1[63:32] bits are not used for CPUs + identification. + + '#size-cells': + const: 0 + +patternProperties: + '^cpu@[0-9a-f]+$': + properties: + device_type: + const: cpu + + reg: + maxItems: 1 + description: | + Usage and definition depend on ARM architecture version and + configuration: + + On uniprocessor ARM architectures previous to v7 + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + items: + - enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. + + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" + + * arm/msm/qcom,saw2.txt + + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. + + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" + + * arm/msm/qcom,kpss-acc.txt + + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. + + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. + + required: + - device_type + - reg + - compatible + + dependencies: + cpu-release-addr: [enable-method] + rockchip,pmu: [enable-method] + +required: + - '#address-cells' + - '#size-cells' + +examples: + - | + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + }; + + - | + // Example 2 (Cortex-A8 uniprocessor 32-bit system): + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + }; + }; + + - | + // Example 3 (ARM 926EJ-S uniprocessor 32-bit system): + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + reg = <0x0>; + }; + }; + + - | + // Example 4 (ARM Cortex-A57 64-bit system): + cpus { + #size-cells = <0>; + #address-cells = <2>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt deleted file mode 100644 index 715622c36260..000000000000 --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ /dev/null @@ -1,25 +0,0 @@ -Texas Instruments DaVinci Platforms Device Tree Bindings --------------------------------------------------------- - -DA850/OMAP-L138/AM18x Evaluation Module (EVM) board -Required root node properties: - - compatible = "ti,da850-evm", "ti,da850"; - -DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board -Required root node properties: - - compatible = "ti,da850-lcdk", "ti,da850"; - -EnBW AM1808 based CMC board -Required root node properties: - - compatible = "enbw,cmc", "ti,da850; - -LEGO MINDSTORMS EV3 (AM1808 based) -Required root node properties: - - compatible = "lego,ev3", "ti,da850"; - -Generic DaVinci Boards ----------------------- - -DA850/OMAP-L138/AM18x generic board -Required root node properties: - - compatible = "ti,da850"; diff --git a/Documentation/devicetree/bindings/arm/emtrion.txt b/Documentation/devicetree/bindings/arm/emtrion.txt new file mode 100644 index 000000000000..83329aefc483 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/emtrion.txt @@ -0,0 +1,12 @@ +Emtrion Devicetree Bindings +=========================== + +emCON Series: +------------- + +Required root node properties + - compatible: + - "emtrion,emcon-mx6", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM + - "emtrion,emcon-mx6-avari", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM on Avari Base + - "emtrion,emcon-mx6", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM + - "emtrion,emcon-mx6-avari", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM on Avari Base diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt new file mode 100644 index 000000000000..75195bee116f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt @@ -0,0 +1,23 @@ +Freescale i.MX7ULP Power Management Components +---------------------------------------------- + +The Multi-System Mode Controller (MSMC) is responsible for sequencing +the MCU into and out of all stop and run power modes. Specifically, it +monitors events to trigger transitions between power modes while +controlling the power, clocks, and memories of the MCU to achieve the +power consumption and functionality of that mode. + +The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or +Standby modes for either Cortex family. Run, Wait, and Stop are the +common terms used for the primary operating modes of Kinetis +microcontrollers. + +Required properties: +- compatible: Should be "fsl,imx7ulp-smc1". +- reg: Specifies base physical address and size of the register sets. + +Example: +smc1: smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 46d0af1f0872..27784b6edfed 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -58,19 +58,11 @@ This binding for the SCU power domain providers uses the generic power domain binding[2]. Required properties: -- compatible: Should be "fsl,scu-pd". -- #address-cells: Should be 1. -- #size-cells: Should be 0. - -Required properties for power domain sub nodes: -- #power-domain-cells: Must be 0. - -Optional Properties: -- reg: Resource ID of this power domain. - No exist means uncontrollable by user. +- compatible: Should be "fsl,imx8qxp-scu-pd". +- #power-domain-cells: Must be 1. Contains the Resource ID used by + SCU commands. See detailed Resource ID list from: - include/dt-bindings/power/imx-rsrc.h -- power-domains: phandle pointing to the parent power domain. + include/dt-bindings/firmware/imx/rsrc.h Clock bindings based on SCU Message Protocol ------------------------------------------------------------ @@ -96,13 +88,16 @@ Pinctrl bindings based on SCU Message Protocol This binding uses the i.MX common pinctrl binding[3]. Required properties: -- compatible: Should be "fsl,imx8qxp-iomuxc". +- compatible: Should be one of: + "fsl,imx8qm-iomuxc", + "fsl,imx8qxp-iomuxc". Required properties for Pinctrl sub nodes: - fsl,pins: Each entry consists of 3 integers which represents the mux and config setting for one pin. The first 2 integers <pin_id mux_mode> are specified using a PIN_FUNC_ID macro, which can be found in + <dt-bindings/pinctrl/pads-imx8qm.h>, <dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. @@ -114,6 +109,12 @@ Required properties for Pinctrl sub nodes: [2] Documentation/devicetree/bindings/power/power_domain.txt [3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +RTC bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: should be "fsl,imx8qxp-sc-rtc"; + Example (imx8qxp): ------------- lsio_mu1: mailbox@5d1c0000 { @@ -152,22 +153,13 @@ firmware { ... }; - imx8qx-pm { - compatible = "fsl,scu-pd"; - #address-cells = <1>; - #size-cells = <0>; - - pd_dma: dma-power-domain { - #power-domain-cells = <0>; + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd"; + #power-domain-cells = <1>; + }; - pd_dma_lpuart0: dma-lpuart0@57 { - reg = <SC_R_UART_0>; - #power-domain-cells = <0>; - power-domains = <&pd_dma>; - }; - ... - }; - ... + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; }; }; }; @@ -179,5 +171,5 @@ serial@5a060000 { clocks = <&clk IMX8QXP_UART0_CLK>, <&clk IMX8QXP_UART0_IPG_CLK>; clock-names = "per", "ipg"; - power-domains = <&pd_dma_lpuart0>; + power-domains = <&pd IMX_SC_R_UART_0>; }; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 5074aeecd327..7fbc42484001 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -101,6 +101,10 @@ i.MX7 SabreSD Board Required root node properties: - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; +i.MX7ULP Evaluation Kit +Required root node properties: + - compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp"; + Generic i.MX boards ------------------- @@ -123,6 +127,10 @@ i.MX6q generic board Required root node properties: - compatible = "fsl,imx6q"; +i.MX7ULP generic board +Required root node properties: + - compatible = "fsl,imx7ulp"; + Freescale Vybrid Platform Device Tree Bindings ---------------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 2c73847499ab..8f0937db55c5 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -142,7 +142,7 @@ characterised by the following graph: The graph is split in two parts delimited by time 1ms on the X-axis. The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope -and denotes the energy costs incurred whilst entering and leaving the idle +and denotes the energy costs incurred while entering and leaving the idle state. The graph curve in the area delimited by X-axis values = {x | x > 1ms } has shallower slope and essentially represents the energy consumption of the idle diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index 4e4a3c0ab9ab..de4075413d91 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6797-apmixedsys" - "mediatek,mt7622-apmixedsys" - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" + - "mediatek,mt7629-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index f17cfe64255d..6b7e8067e7aa 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-ethsys", "syscon" - "mediatek,mt7622-ethsys", "syscon" - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7629-ethsys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 89f4272a1441..417bd83d1378 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -12,6 +12,7 @@ Required Properties: - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt7629-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt index 7fe5dc6097a6..d179a61536f4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-pciesys", "syscon" + - "mediatek,mt7629-pciesys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index 6755514deb80..4c7e478117a0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt2712-pericfg", "syscon" - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt7629-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt index d113b8e741f3..30cb645c0e54 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-sgmiisys", "syscon" + - "mediatek,mt7629-sgmiisys", "syscon" - #clock-cells: Must be 1 The SGMIISYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt index b8184da2508c..7cb02c930613 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-ssusbsys", "syscon" + - "mediatek,mt7629-ssusbsys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index d849465b8c99..d160c2b4b6fe 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6797-topckgen" - "mediatek,mt7622-topckgen" - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" + - "mediatek,mt7629-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt index 117d741a2e4f..951687528efb 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt @@ -11,4 +11,4 @@ Required root node properties: MMP2 Brownstone Board Required root node properties: - - compatible = "mrvl,mmp2-brownstone"; + - compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; diff --git a/Documentation/devicetree/bindings/arm/nspire.txt b/Documentation/devicetree/bindings/arm/nspire.txt deleted file mode 100644 index 4d08518bd176..000000000000 --- a/Documentation/devicetree/bindings/arm/nspire.txt +++ /dev/null @@ -1,14 +0,0 @@ -TI-NSPIRE calculators - -Required properties: -- compatible: Compatible property value should contain "ti,nspire". - CX models should have "ti,nspire-cx" - Touchpad models should have "ti,nspire-tp" - Clickpad models should have "ti,nspire-clp" - -Example: - -/ { - model = "TI-NSPIRE CX"; - compatible = "ti,nspire-cx"; - ... diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt deleted file mode 100644 index 0df6acacfaea..000000000000 --- a/Documentation/devicetree/bindings/arm/primecell.txt +++ /dev/null @@ -1,46 +0,0 @@ -* ARM Primecell Peripherals - -ARM, Ltd. Primecell peripherals have a standard id register that can be used to -identify the peripheral type, vendor, and revision. This value can be used for -driver matching. - -Required properties: - -- compatible : should be a specific name for the peripheral and - "arm,primecell". The specific name will match the ARM - engineering name for the logic block in the form: "arm,pl???" - -Optional properties: - -- arm,primecell-periphid : Value to override the h/w value with -- clocks : From common clock binding. First clock is phandle to clock for apb - pclk. Additional clocks are optional and specific to those peripherals. -- clock-names : From common clock binding. Shall be "apb_pclk" for first clock. -- dmas : From common DMA binding. If present, refers to one or more dma channels. -- dma-names : From common DMA binding, needs to match the 'dmas' property. - Devices with exactly one receive and transmit channel shall name - these "rx" and "tx", respectively. -- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt -- pinctrl-names : Names corresponding to the numbered pinctrl states -- interrupts : one or more interrupt specifiers -- interrupt-names : names corresponding to the interrupts properties - -Example: - -serial@fff36000 { - compatible = "arm,pl011", "arm,primecell"; - arm,primecell-periphid = <0x00341011>; - - clocks = <&pclk>; - clock-names = "apb_pclk"; - - dmas = <&dma-controller 4>, <&dma-controller 5>; - dma-names = "rx", "tx"; - - pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; - pinctrl-names = "default","sleep"; - - interrupts = <0 11 0x4>; -}; - diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml new file mode 100644 index 000000000000..5aae37f1c563 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/primecell.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/primecell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Primecell Peripherals + +maintainers: + - Rob Herring <robh@kernel.org> + +description: |+ + ARM, Ltd. Primecell peripherals have a standard id register that can be used to + identify the peripheral type, vendor, and revision. This value can be used for + driver matching. + +properties: + compatible: + contains: + const: arm,primecell + description: + Should be a specific name for the peripheral followed by "arm,primecell". + The specific name will match the ARM engineering name for the logic block + in the form "arm,pl???" + + arm,primecell-periphid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Value to override the h/w ID value + clocks: + minItems: 1 + maxItems: 32 + clock-names: + contains: + const: apb_pclk + additionalItems: true +... diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt deleted file mode 100644 index ee532e705d6c..000000000000 --- a/Documentation/devicetree/bindings/arm/qcom.txt +++ /dev/null @@ -1,57 +0,0 @@ -QCOM device tree bindings -------------------------- - -Some qcom based bootloaders identify the dtb blob based on a set of -device properties like SoC and platform and revisions of those components. -To support this scheme, we encode this information into the board compatible -string. - -Each board must specify a top-level board compatible string with the following -format: - - compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" - -The 'SoC' and 'board' elements are required. All other elements are optional. - -The 'SoC' element must be one of the following strings: - - apq8016 - apq8074 - apq8084 - apq8096 - msm8916 - msm8974 - msm8992 - msm8994 - msm8996 - mdm9615 - ipq8074 - sdm845 - -The 'board' element must be one of the following strings: - - cdp - liquid - dragonboard - mtp - sbc - hk01 - -The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> -where the minor number may be omitted when it's zero, i.e. v1.0 is the same -as v1. If all versions of the 'board_version' elements match, then a -wildcard '*' should be used, e.g. 'v*'. - -The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. - -Examples: - - "qcom,msm8916-v1-cdp-pm8916-v2.1" - -A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version -2.1. - - "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" - -A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in -foundry 2. diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml new file mode 100644 index 000000000000..f6316ab66385 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/arm/qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM device tree bindings + +maintainers: + - Stephen Boyd <sboyd@codeaurora.org> + +description: | + Some qcom based bootloaders identify the dtb blob based on a set of + device properties like SoC and platform and revisions of those components. + To support this scheme, we encode this information into the board compatible + string. + + Each board must specify a top-level board compatible string with the following + format: + + compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" + + The 'SoC' and 'board' elements are required. All other elements are optional. + + The 'SoC' element must be one of the following strings: + + apq8016 + apq8074 + apq8084 + apq8096 + msm8916 + msm8974 + msm8992 + msm8994 + msm8996 + mdm9615 + ipq8074 + sdm845 + + The 'board' element must be one of the following strings: + + cdp + liquid + dragonboard + mtp + sbc + hk01 + + The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> + where the minor number may be omitted when it's zero, i.e. v1.0 is the same + as v1. If all versions of the 'board_version' elements match, then a + wildcard '*' should be used, e.g. 'v*'. + + The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. + + Examples: + + "qcom,msm8916-v1-cdp-pm8916-v2.1" + + A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version + 2.1. + + "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" + + A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in + foundry 2. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,apq8016-sbc + - const: qcom,apq8016 + + - items: + - enum: + - qcom,apq8064-cm-qs600 + - qcom,apq8064-ifc6410 + - const: qcom,apq8064 + + - items: + - enum: + - qcom,apq8074-dragonboard + - const: qcom,apq8074 + + - items: + - enum: + - qcom,apq8060-dragonboard + - qcom,msm8660-surf + - const: qcom,msm8660 + + - items: + - enum: + - qcom,apq8084-mtp + - qcom,apq8084-sbc + - const: qcom,apq8084 + + - items: + - enum: + - qcom,msm8960-cdp + - const: qcom,msm8960 + + - items: + - const: qcom,msm8916-mtp/1 + - const: qcom,msm8916-mtp + - const: qcom,msm8916 + + - items: + - const: qcom,msm8996-mtp + + - items: + - const: qcom,ipq4019 + + - items: + - enum: + - qcom,ipq8064-ap148 + - const: qcom,ipq8064 + + - items: + - enum: + - qcom,ipq8074-hk01 + - const: qcom,ipq8074 + +... diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.txt b/Documentation/devicetree/bindings/arm/renesas,prr.txt new file mode 100644 index 000000000000..08e482e953ca --- /dev/null +++ b/Documentation/devicetree/bindings/arm/renesas,prr.txt @@ -0,0 +1,20 @@ +Renesas Product Register + +Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that +allows to retrieve SoC product and revision information. If present, a device +node for this register should be added. + +Required properties: + - compatible: Must be one of: + "renesas,prr" + "renesas,bsid" + - reg: Base address and length of the register block. + + +Examples +-------- + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt deleted file mode 100644 index 0cc71236d639..000000000000 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ /dev/null @@ -1,240 +0,0 @@ -Rockchip platforms device tree bindings ---------------------------------------- - -- 96boards RK3399 Ficus (ROCK960 Enterprise Edition) - Required root node properties: - - compatible = "vamrs,ficus", "rockchip,rk3399"; - -- 96boards RK3399 Rock960 (ROCK960 Consumer Edition) - Required root node properties: - - compatible = "vamrs,rock960", "rockchip,rk3399"; - -- Amarula Vyasa RK3288 board - Required root node properties: - - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; - -- Asus Tinker board - Required root node properties: - - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - -- Asus Tinker board S - Required root node properties: - - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; - -- Kylin RK3036 board: - Required root node properties: - - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036"; - -- MarsBoard RK3066 board: - Required root node properties: - - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; - -- bq Curie 2 tablet: - Required root node properties: - - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; - -- ChipSPARK Rayeager PX2 board: - Required root node properties: - - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; - -- Radxa Rock board: - Required root node properties: - - compatible = "radxa,rock", "rockchip,rk3188"; - -- Radxa Rock2 Square board: - Required root node properties: - - compatible = "radxa,rock2-square", "rockchip,rk3288"; - -- Rikomagic MK808 v1 board: - Required root node properties: - - compatible = "rikomagic,mk808", "rockchip,rk3066a"; - -- Firefly Firefly-RK3288 board: - Required root node properties: - - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; - or - - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; - -- Firefly Firefly-RK3288 Reload board: - Required root node properties: - - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; - -- Firefly Firefly-RK3399 board: - Required root node properties: - - compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; - -- Firefly roc-rk3328-cc board: - Required root node properties: - - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; - -- Firefly ROC-RK3399-PC board: - Required root node properties: - - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; - -- ChipSPARK PopMetal-RK3288 board: - Required root node properties: - - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; - -- Netxeon R89 board: - Required root node properties: - - compatible = "netxeon,r89", "rockchip,rk3288"; - -- GeekBuying GeekBox: - Required root node properties: - - compatible = "geekbuying,geekbox", "rockchip,rk3368"; - -- Google Bob (Asus Chromebook Flip C101PA): - Required root node properties: - compatible = "google,bob-rev13", "google,bob-rev12", - "google,bob-rev11", "google,bob-rev10", - "google,bob-rev9", "google,bob-rev8", - "google,bob-rev7", "google,bob-rev6", - "google,bob-rev5", "google,bob-rev4", - "google,bob", "google,gru", "rockchip,rk3399"; - -- Google Brain (dev-board): - Required root node properties: - - compatible = "google,veyron-brain-rev0", "google,veyron-brain", - "google,veyron", "rockchip,rk3288"; - -- Google Gru (dev-board): - Required root node properties: - - compatible = "google,gru-rev15", "google,gru-rev14", - "google,gru-rev13", "google,gru-rev12", - "google,gru-rev11", "google,gru-rev10", - "google,gru-rev9", "google,gru-rev8", - "google,gru-rev7", "google,gru-rev6", - "google,gru-rev5", "google,gru-rev4", - "google,gru-rev3", "google,gru-rev2", - "google,gru", "rockchip,rk3399"; - -- Google Jaq (Haier Chromebook 11 and more): - Required root node properties: - - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", - "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", - "google,veyron-jaq-rev1", "google,veyron-jaq", - "google,veyron", "rockchip,rk3288"; - -- Google Jerry (Hisense Chromebook C11 and more): - Required root node properties: - - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", - "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", - "google,veyron-jerry-rev3", "google,veyron-jerry", - "google,veyron", "rockchip,rk3288"; - -- Google Kevin (Samsung Chromebook Plus): - Required root node properties: - - compatible = "google,kevin-rev15", "google,kevin-rev14", - "google,kevin-rev13", "google,kevin-rev12", - "google,kevin-rev11", "google,kevin-rev10", - "google,kevin-rev9", "google,kevin-rev8", - "google,kevin-rev7", "google,kevin-rev6", - "google,kevin", "google,gru", "rockchip,rk3399"; - -- Google Mickey (Asus Chromebit CS10): - Required root node properties: - - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", - "google,veyron-mickey-rev6", "google,veyron-mickey-rev5", - "google,veyron-mickey-rev4", "google,veyron-mickey-rev3", - "google,veyron-mickey-rev2", "google,veyron-mickey-rev1", - "google,veyron-mickey-rev0", "google,veyron-mickey", - "google,veyron", "rockchip,rk3288"; - -- Google Minnie (Asus Chromebook Flip C100P): - Required root node properties: - - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", - "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", - "google,veyron-minnie-rev0", "google,veyron-minnie", - "google,veyron", "rockchip,rk3288"; - -- Google Pinky (dev-board): - Required root node properties: - - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", - "google,veyron", "rockchip,rk3288"; - -- Google Speedy (Asus C201 Chromebook): - Required root node properties: - - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", - "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", - "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", - "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", - "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; - -- mqmaker MiQi: - Required root node properties: - - compatible = "mqmaker,miqi", "rockchip,rk3288"; - -- Phytec phyCORE-RK3288: Rapid Development Kit - Required root node properties: - - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; - -- Pine64 Rock64 board: - Required root node properties: - - compatible = "pine64,rock64", "rockchip,rk3328"; - -- Pine64 RockPro64 board: - Required root node properties: - - compatible = "pine64,rockpro64", "rockchip,rk3399"; - -- Rockchip PX3 Evaluation board: - Required root node properties: - - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; - -- Rockchip PX5 Evaluation board: - Required root node properties: - - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; - -- Rockchip PX30 Evaluation board: - Required root node properties: - - compatible = "rockchip,px30-evb", "rockchip,px30"; - -- Rockchip RV1108 Evaluation board - Required root node properties: - - compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; - -- Rockchip RK3368 evb: - Required root node properties: - - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; - -- Rockchip R88 board: - Required root node properties: - - compatible = "rockchip,r88", "rockchip,rk3368"; - -- Rockchip RK3228 Evaluation board: - Required root node properties: - - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; - -- Rockchip RK3229 Evaluation board: - - compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; - -- Rockchip RK3288 Fennec board: - Required root node properties: - - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; - -- Rockchip RK3328 evb: - Required root node properties: - - compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; - -- Rockchip RK3399 evb: - Required root node properties: - - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; - -- Rockchip RK3399 Sapphire board standalone: - Required root node properties: - - compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; - -- Rockchip RK3399 Sapphire Excavator board: - Required root node properties: - - compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399"; - -- Theobroma Systems RK3368-uQ7 Haikou Baseboard: - Required root node properties: - - compatible = "tsd,rk3368-uq7-haikou", "rockchip,rk3368"; - -- Theobroma Systems RK3399-Q7 Haikou Baseboard: - Required root node properties: - - compatible = "tsd,rk3399-q7-haikou", "rockchip,rk3399"; - -- Tronsmart Orion R68 Meta - Required root node properties: - - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml new file mode 100644 index 000000000000..b12958bda09c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -0,0 +1,423 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip platforms device tree bindings + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: 96boards RK3399 Ficus (ROCK960 Enterprise Edition) + items: + - const: vamrs,ficus + - const: rockchip,rk3399 + + - description: 96boards RK3399 Rock960 (ROCK960 Consumer Edition) + items: + - const: vamrs,rock960 + - const: rockchip,rk3399 + + - description: Amarula Vyasa RK3288 + items: + - const: amarula,vyasa-rk3288 + - const: rockchip,rk3288 + + - description: Asus Tinker board + items: + - const: asus,rk3288-tinker + - const: rockchip,rk3288 + + - description: Asus Tinker board S + items: + - const: asus,rk3288-tinker-s + - const: rockchip,rk3288 + + - description: bq Curie 2 tablet + items: + - const: mundoreader,bq-curie2 + - const: rockchip,rk3066a + + - description: bq Edison 2 Quad-Core tablet + items: + - const: mundoreader,bq-edison2qc + - const: rockchip,rk3188 + + - description: ChipSPARK PopMetal-RK3288 + items: + - const: chipspark,popmetal-rk3288 + - const: rockchip,rk3288 + + - description: ChipSPARK Rayeager PX2 + items: + - const: chipspark,rayeager-px2 + - const: rockchip,rk3066a + + - description: Firefly Firefly-RK3288 + items: + - enum: + - firefly,firefly-rk3288 + - firefly,firefly-rk3288-beta + - const: rockchip,rk3288 + + - description: Firefly Firefly-RK3288 Reload + items: + - const: firefly,firefly-rk3288-reload + - const: rockchip,rk3288 + + - description: Firefly Firefly-RK3399 + items: + - const: firefly,firefly-rk3399 + - const: rockchip,rk3399 + + - description: Firefly roc-rk3328-cc + items: + - const: firefly,roc-rk3328-cc + - const: rockchip,rk3328 + + - description: Firefly ROC-RK3399-PC + items: + - const: firefly,roc-rk3399-pc + - const: rockchip,rk3399 + + - description: GeekBuying GeekBox + items: + - const: geekbuying,geekbox + - const: rockchip,rk3368 + + - description: Google Bob (Asus Chromebook Flip C101PA) + items: + - const: google,bob-rev13 + - const: google,bob-rev12 + - const: google,bob-rev11 + - const: google,bob-rev10 + - const: google,bob-rev9 + - const: google,bob-rev8 + - const: google,bob-rev7 + - const: google,bob-rev6 + - const: google,bob-rev5 + - const: google,bob-rev4 + - const: google,bob + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Brain (dev-board) + items: + - const: google,veyron-brain-rev0 + - const: google,veyron-brain + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Gru (dev-board) + items: + - const: google,gru-rev15 + - const: google,gru-rev14 + - const: google,gru-rev13 + - const: google,gru-rev12 + - const: google,gru-rev11 + - const: google,gru-rev10 + - const: google,gru-rev9 + - const: google,gru-rev8 + - const: google,gru-rev7 + - const: google,gru-rev6 + - const: google,gru-rev5 + - const: google,gru-rev4 + - const: google,gru-rev3 + - const: google,gru-rev2 + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Jaq (Haier Chromebook 11 and more) + items: + - const: google,veyron-jaq-rev5 + - const: google,veyron-jaq-rev4 + - const: google,veyron-jaq-rev3 + - const: google,veyron-jaq-rev2 + - const: google,veyron-jaq-rev1 + - const: google,veyron-jaq + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Jerry (Hisense Chromebook C11 and more) + items: + - const: google,veyron-jerry-rev7 + - const: google,veyron-jerry-rev6 + - const: google,veyron-jerry-rev5 + - const: google,veyron-jerry-rev4 + - const: google,veyron-jerry-rev3 + - const: google,veyron-jerry + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Kevin (Samsung Chromebook Plus) + items: + - const: google,kevin-rev15 + - const: google,kevin-rev14 + - const: google,kevin-rev13 + - const: google,kevin-rev12 + - const: google,kevin-rev11 + - const: google,kevin-rev10 + - const: google,kevin-rev9 + - const: google,kevin-rev8 + - const: google,kevin-rev7 + - const: google,kevin-rev6 + - const: google,kevin + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Mickey (Asus Chromebit CS10) + items: + - const: google,veyron-mickey-rev8 + - const: google,veyron-mickey-rev7 + - const: google,veyron-mickey-rev6 + - const: google,veyron-mickey-rev5 + - const: google,veyron-mickey-rev4 + - const: google,veyron-mickey-rev3 + - const: google,veyron-mickey-rev2 + - const: google,veyron-mickey-rev1 + - const: google,veyron-mickey-rev0 + - const: google,veyron-mickey + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Minnie (Asus Chromebook Flip C100P) + items: + - const: google,veyron-minnie-rev4 + - const: google,veyron-minnie-rev3 + - const: google,veyron-minnie-rev2 + - const: google,veyron-minnie-rev1 + - const: google,veyron-minnie-rev0 + - const: google,veyron-minnie + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Pinky (dev-board) + items: + - const: google,veyron-pinky-rev2 + - const: google,veyron-pinky + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10) + items: + - const: google,scarlet-rev15-sku7 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku7 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku7 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku7 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku7 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku7 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku7 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku7 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku7 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku7 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku7 + - const: google,scarlet-rev5 + - const: google,scarlet-rev4-sku7 + - const: google,scarlet-rev4 + - const: google,scarlet-rev3-sku7 + - const: google,scarlet-rev3 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Scarlet - Innolux display (Acer Chromebook Tab 10) + items: + - const: google,scarlet-rev15-sku6 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku6 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku6 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku6 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku6 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku6 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku6 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku6 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku6 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku6 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku6 + - const: google,scarlet-rev5 + - const: google,scarlet-rev4-sku6 + - const: google,scarlet-rev4 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Speedy (Asus C201 Chromebook) + items: + - const: google,veyron-speedy-rev9 + - const: google,veyron-speedy-rev8 + - const: google,veyron-speedy-rev7 + - const: google,veyron-speedy-rev6 + - const: google,veyron-speedy-rev5 + - const: google,veyron-speedy-rev4 + - const: google,veyron-speedy-rev3 + - const: google,veyron-speedy-rev2 + - const: google,veyron-speedy + - const: google,veyron + - const: rockchip,rk3288 + + - description: Haoyu MarsBoard RK3066 + items: + - const: haoyu,marsboard-rk3066 + - const: rockchip,rk3066a + + - description: mqmaker MiQi + items: + - const: mqmaker,miqi + - const: rockchip,rk3288 + + - description: Netxeon R89 board + items: + - const: netxeon,r89 + - const: rockchip,rk3288 + + - description: Phytec phyCORE-RK3288 Rapid Development Kit + items: + - const: phytec,rk3288-pcm-947 + - const: phytec,rk3288-phycore-som + - const: rockchip,rk3288 + + - description: Pine64 Rock64 + items: + - const: pine64,rock64 + - const: rockchip,rk3328 + + - description: Pine64 RockPro64 + items: + - const: pine64,rockpro64 + - const: rockchip,rk3399 + + - description: Radxa Rock + items: + - const: radxa,rock + - const: rockchip,rk3188 + + - description: Radxa Rock2 Square + items: + - const: radxa,rock2-square + - const: rockchip,rk3288 + + - description: Rikomagic MK808 v1 + items: + - const: rikomagic,mk808 + - const: rockchip,rk3066a + + - description: Rockchip Kylin + items: + - const: rockchip,kylin-rk3036 + - const: rockchip,rk3036 + + - description: Rockchip PX3 Evaluation board + items: + - const: rockchip,px3-evb + - const: rockchip,px3 + - const: rockchip,rk3188 + + - description: Rockchip PX30 Evaluation board + items: + - const: rockchip,px30-evb + - const: rockchip,px30 + + - description: Rockchip PX5 Evaluation board + items: + - const: rockchip,px5-evb + - const: rockchip,px5 + - const: rockchip,rk3368 + + - description: Rockchip R88 + items: + - const: rockchip,r88 + - const: rockchip,rk3368 + + - description: Rockchip RK3228 Evaluation board + items: + - const: rockchip,rk3228-evb + - const: rockchip,rk3228 + + - description: Rockchip RK3229 Evaluation board + items: + - const: rockchip,rk3229-evb + - const: rockchip,rk3229 + + - description: Rockchip RK3288 Evaluation board + items: + - enum: + - rockchip,rk3288-evb-act8846 + - rockchip,rk3288-evb-rk808 + - const: rockchip,rk3288 + + - description: Rockchip RK3288 Fennec + items: + - const: rockchip,rk3288-fennec + - const: rockchip,rk3288 + + - description: Rockchip RK3328 Evaluation board + items: + - const: rockchip,rk3328-evb + - const: rockchip,rk3328 + + - description: Rockchip RK3368 Evaluation board (act8846 pmic) + items: + - const: rockchip,rk3368-evb-act8846 + - const: rockchip,rk3368 + + - description: Rockchip RK3399 Evaluation board + items: + - const: rockchip,rk3399-evb + - const: rockchip,rk3399 + + - description: Rockchip RK3399 Sapphire standalone + items: + - const: rockchip,rk3399-sapphire + - const: rockchip,rk3399 + + - description: Rockchip RK3399 Sapphire with Excavator Baseboard + items: + - const: rockchip,rk3399-sapphire-excavator + - const: rockchip,rk3399 + + - description: Rockchip RV1108 Evaluation board + items: + - const: rockchip,rv1108-evb + - const: rockchip,rv1108 + + - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard + items: + - const: tsd,rk3368-uq7-haikou + - const: rockchip,rk3368 + + - description: Theobroma Systems RK3399-Q7 with Haikou baseboard + items: + - const: tsd,rk3399-q7-haikou + - const: rockchip,rk3399 + + - description: Tronsmart Orion R68 Meta + items: + - const: tronsmart,orion-r68-meta + - const: rockchip,rk3368 +... diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index f5e0f82fd503..7f91c2a8b54e 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -27,7 +27,7 @@ SoCs: compatible = "renesas,r8a77470" - RZ/G2M (R8A774A1) compatible = "renesas,r8a774a1" - - RZ/G2E (RA8774C0) + - RZ/G2E (R8A774C0) compatible = "renesas,r8a774c0" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" @@ -101,6 +101,10 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744" + - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) + compatible = "iwave,g20m", "renesas,r8a7744" - Kingfisher (SBEV-RCAR-KF-M03) compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) @@ -149,21 +153,3 @@ Boards: compatible = "renesas,v3msk", "renesas,r8a77970" - Wheat (RTP0RC7792ASKB0000JE) compatible = "renesas,wheat", "renesas,r8a7792" - - -Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that -allows to retrieve SoC product and revision information. If present, a device -node for this register should be added. - -Required properties: - - compatible: Must be "renesas,prr" or "renesas,bsid" - - reg: Base address and length of the register block. - - -Examples --------- - - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt deleted file mode 100644 index 7b28ee6fee91..000000000000 --- a/Documentation/devicetree/bindings/arm/sirf.txt +++ /dev/null @@ -1,11 +0,0 @@ -CSR SiRFprimaII and SiRFmarco device tree bindings. -======================================== - -Required root node properties: - - compatible: - - "sirf,atlas6-cb" : atlas6 "cb" evaluation board - - "sirf,atlas6" : atlas6 device based board - - "sirf,atlas7-cb" : atlas7 "cb" evaluation board - - "sirf,atlas7" : atlas7 device based board - - "sirf,prima2-cb" : prima2 "cb" evaluation board - - "sirf,prima2" : prima2 device based board diff --git a/Documentation/devicetree/bindings/arm/sirf.yaml b/Documentation/devicetree/bindings/arm/sirf.yaml new file mode 100644 index 000000000000..0b597032c923 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sirf.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sirf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CSR SiRFprimaII and SiRFmarco device tree bindings. + +maintainers: + - Binghua Duan <binghua.duan@csr.com> + - Barry Song <Baohua.Song@csr.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - const: sirf,atlas6-cb + - const: sirf,atlas6 + - items: + - const: sirf,atlas7-cb + - const: sirf,atlas7 + - items: + - const: sirf,prima2-cb + - const: sirf,prima2 +... diff --git a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt index d27a646f48a9..d27a646f48a9 100644 --- a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt +++ b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt new file mode 100644 index 000000000000..b3ed1033740e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt @@ -0,0 +1,47 @@ +Socionext UniPhier SoC family +----------------------------- + +Required properties in the root node: + - compatible: should contain board and SoC compatible strings + +SoC and board compatible strings: + (sorted chronologically) + + - LD4 SoC: "socionext,uniphier-ld4" + - Reference Board: "socionext,uniphier-ld4-ref" + + - Pro4 SoC: "socionext,uniphier-pro4" + - Reference Board: "socionext,uniphier-pro4-ref" + - Ace Board: "socionext,uniphier-pro4-ace" + - Sanji Board: "socionext,uniphier-pro4-sanji" + + - sLD8 SoC: "socionext,uniphier-sld8" + - Reference Board: "socionext,uniphier-sld8-ref" + + - PXs2 SoC: "socionext,uniphier-pxs2" + - Gentil Board: "socionext,uniphier-pxs2-gentil" + - Vodka Board: "socionext,uniphier-pxs2-vodka" + + - LD6b SoC: "socionext,uniphier-ld6b" + - Reference Board: "socionext,uniphier-ld6b-ref" + + - LD11 SoC: "socionext,uniphier-ld11" + - Reference Board: "socionext,uniphier-ld11-ref" + - Global Board: "socionext,uniphier-ld11-global" + + - LD20 SoC: "socionext,uniphier-ld20" + - Reference Board: "socionext,uniphier-ld20-ref" + - Global Board: "socionext,uniphier-ld20-global" + + - PXs3 SoC: "socionext,uniphier-pxs3" + - Reference Board: "socionext,uniphier-pxs3-ref" + +Example: + +/dts-v1/; + +/ { + compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; + + ... +}; diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt deleted file mode 100644 index 0d42949df6c2..000000000000 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ /dev/null @@ -1,26 +0,0 @@ -ST SPEAr Platforms Device Tree Bindings ---------------------------------------- - -Boards with the ST SPEAr600 SoC shall have the following properties: -Required root node property: -compatible = "st,spear600"; - -Boards with the ST SPEAr300 SoC shall have the following properties: -Required root node property: -compatible = "st,spear300"; - -Boards with the ST SPEAr310 SoC shall have the following properties: -Required root node property: -compatible = "st,spear310"; - -Boards with the ST SPEAr320 SoC shall have the following properties: -Required root node property: -compatible = "st,spear320"; - -Boards with the ST SPEAr1310 SoC shall have the following properties: -Required root node property: -compatible = "st,spear1310"; - -Boards with the ST SPEAr1340 SoC shall have the following properties: -Required root node property: -compatible = "st,spear1340"; diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml new file mode 100644 index 000000000000..f6ec731c9531 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/spear.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr Platforms Device Tree Bindings + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + - Stefan Roese <sr@denx.de> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - st,spear600 + - st,spear300 + - st,spear310 + - st,spear320 + - st,spear1310 + - st,spear1340 +... diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt deleted file mode 100644 index 8d27f6b084c7..000000000000 --- a/Documentation/devicetree/bindings/arm/sti.txt +++ /dev/null @@ -1,23 +0,0 @@ -ST STi Platforms Device Tree Bindings ---------------------------------------- - -Boards with the ST STiH415 SoC shall have the following properties: -Required root node property: -compatible = "st,stih415"; - -Boards with the ST STiH416 SoC shall have the following properties: -Required root node property: -compatible = "st,stih416"; - -Boards with the ST STiH407 SoC shall have the following properties: -Required root node property: -compatible = "st,stih407"; - -Boards with the ST STiH410 SoC shall have the following properties: -Required root node property: -compatible = "st,stih410"; - -Boards with the ST STiH418 SoC shall have the following properties: -Required root node property: -compatible = "st,stih418"; - diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml new file mode 100644 index 000000000000..47f9b8eebaa0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sti.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST STi Platforms Device Tree Bindings + +maintainers: + - Patrice Chotard <patrice.chotard@st.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - st,stih415 + - st,stih416 + - st,stih407 + - st,stih410 + - st,stih418 +... diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index e4beec3d9ad3..9254cbe7d516 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,8 +14,10 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 - allwinner-sun8i-r40 + allwinner,sun8i-r40 + allwinner,sun8i-t3 allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 + allwinner,suniv-f1c100s nextthing,gr8 diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt deleted file mode 100644 index c59b15f64346..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ /dev/null @@ -1,65 +0,0 @@ -NVIDIA Tegra device tree bindings -------------------------------------------- - -SoCs -------------------------------------------- - -Each device tree must specify which Tegra SoC it uses, using one of the -following compatible values: - - nvidia,tegra20 - nvidia,tegra30 - nvidia,tegra114 - nvidia,tegra124 - nvidia,tegra132 - nvidia,tegra210 - nvidia,tegra186 - nvidia,tegra194 - -Boards -------------------------------------------- - -Each device tree must specify which one or more of the following -board-specific compatible values: - - ad,medcom-wide - ad,plutux - ad,tamonten - ad,tec - compal,paz00 - compulab,trimslice - nvidia,beaver - nvidia,cardhu - nvidia,cardhu-a02 - nvidia,cardhu-a04 - nvidia,dalmore - nvidia,harmony - nvidia,jetson-tk1 - nvidia,norrin - nvidia,p2371-0000 - nvidia,p2371-2180 - nvidia,p2571 - nvidia,p2771-0000 - nvidia,p2972-0000 - nvidia,roth - nvidia,seaboard - nvidia,tn7 - nvidia,ventana - toradex,apalis_t30 - toradex,apalis_t30-eval - toradex,apalis_t30-v1.1 - toradex,apalis_t30-v1.1-eval - toradex,apalis-tk1 - toradex,apalis-tk1-eval - toradex,apalis-tk1-v1.2 - toradex,apalis-tk1-v1.2-eval - toradex,colibri_t20 - toradex,colibri_t20-eval-v3 - toradex,colibri_t20-iris - toradex,colibri_t30 - toradex,colibri_t30-eval-v3 - -Trusted Foundations -------------------------------------------- -Tegra supports the Trusted Foundation secure monitor. See the -"tlm,trusted-foundations" binding's documentation for more details. diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml new file mode 100644 index 000000000000..fbcde8a7e067 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra device tree bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - compal,paz00 + - compulab,trimslice + - nvidia,harmony + - nvidia,seaboard + - nvidia,ventana + - const: nvidia,tegra20 + - items: + - enum: + - ad,medcom-wide + - ad,plutux + - ad,tec + - const: ad,tamonten + - const: nvidia,tegra20 + - items: + - enum: + - toradex,colibri_t20-eval-v3 + - toradex,colibri_t20-iris + - const: toradex,colibri_t20 + - const: nvidia,tegra20 + - items: + - enum: + - nvidia,beaver + - const: nvidia,tegra30 + - items: + - enum: + - nvidia,cardhu-a02 + - nvidia,cardhu-a04 + - const: nvidia,cardhu + - const: nvidia,tegra30 + - items: + - const: toradex,apalis_t30-eval + - const: toradex,apalis_t30 + - const: nvidia,tegra30 + - items: + - const: toradex,apalis_t30-eval-v1.1 + - const: toradex,apalis_t30-eval + - const: toradex,apalis_t30-v1.1 + - const: toradex,apalis_t30 + - const: nvidia,tegra30 + - items: + - enum: + - toradex,colibri_t30-eval-v3 + - const: toradex,colibri_t30 + - const: nvidia,tegra30 + - items: + - enum: + - nvidia,dalmore + - nvidia,roth + - nvidia,tn7 + - const: nvidia,tegra114 + - items: + - enum: + - nvidia,jetson-tk1 + - nvidia,venice2 + - const: nvidia,tegra124 + - items: + - const: toradex,apalis-tk1-eval + - const: toradex,apalis-tk1 + - const: nvidia,tegra124 + - items: + - const: toradex,apalis-tk1-v1.2-eval + - const: toradex,apalis-tk1-eval + - const: toradex,apalis-tk1-v1.2 + - const: toradex,apalis-tk1 + - const: nvidia,tegra124 + - items: + - enum: + - nvidia,norrin + - const: nvidia,tegra132 + - const: nvidia,tegra124 + - items: + - enum: + - nvidia,p2371-0000 + - nvidia,p2371-2180 + - nvidia,p2571 + - const: nvidia,tegra210 + - items: + - enum: + - nvidia,p2771-0000 + - const: nvidia,tegra186 + - items: + - enum: + - nvidia,p2972-0000 + - const: nvidia,tegra194 diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt index c9fd6d1de57e..2d89cdc39eb0 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt @@ -15,6 +15,9 @@ Required properties: Optional properties: - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value must be 2. Example: diff --git a/Documentation/devicetree/bindings/arm/ti/nspire.yaml b/Documentation/devicetree/bindings/arm/ti/nspire.yaml new file mode 100644 index 000000000000..e372b43da62f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/nspire.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/nspire.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-NSPIRE calculators + +maintainers: + - Daniel Tang <dt.tangr@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + # CX models + - ti,nspire-cx + # Touchpad models + - ti,nspire-tp + # Clickpad models + - ti,nspire-clp +... diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml new file mode 100644 index 000000000000..4326d2cfa15d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/davinci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DaVinci Platforms Device Tree Bindings + +maintainers: + - Sekhar Nori <nsekhar@ti.com> + +description: + DA850/OMAP-L138/AM18x based boards + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - ti,da850-evm # DA850/OMAP-L138/AM18x Evaluation Module (EVM) board + - ti,da850-lcdk # DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board + - enbw,cmc # EnBW AM1808 based CMC board + - lego,ev3 # LEGO MINDSTORMS EV3 (AM1808 based) + - const: ti,da850 +... diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt deleted file mode 100644 index 87dc1ddf4770..000000000000 --- a/Documentation/devicetree/bindings/arm/vt8500.txt +++ /dev/null @@ -1,22 +0,0 @@ -VIA/Wondermedia VT8500 Platforms Device Tree Bindings ---------------------------------------- - -Boards with the VIA VT8500 SoC shall have the following properties: -Required root node property: -compatible = "via,vt8500"; - -Boards with the Wondermedia WM8505 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8505"; - -Boards with the Wondermedia WM8650 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8650"; - -Boards with the Wondermedia WM8750 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8750"; - -Boards with the Wondermedia WM8850 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8850"; diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml new file mode 100644 index 000000000000..7b25b6fa34e9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/vt8500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VIA/Wondermedia VT8500 Platforms Device Tree Bindings + +maintainers: + - Tony Prisk <linux@prisktech.co.nz> +description: test + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - via,vt8500 + - wm,wm8505 + - wm,wm8650 + - wm,wm8750 + - wm,wm8850 diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt deleted file mode 100644 index 26fe5ecc4332..000000000000 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ /dev/null @@ -1,83 +0,0 @@ -Xilinx Zynq Platforms Device Tree Bindings - -Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor -shall have the following properties. - -Required root node properties: - - compatible = "xlnx,zynq-7000"; - -Additional compatible strings: - -- Adapteva Parallella board - "adapteva,parallella" - -- Avnet MicroZed board - "avnet,zynq-microzed" - "xlnx,zynq-microzed" - -- Avnet ZedBoard board - "avnet,zynq-zed" - "xlnx,zynq-zed" - -- Digilent Zybo board - "digilent,zynq-zybo" - -- Digilent Zybo Z7 board - "digilent,zynq-zybo-z7" - -- Xilinx CC108 internal board - "xlnx,zynq-cc108" - -- Xilinx ZC702 internal board - "xlnx,zynq-zc702" - -- Xilinx ZC706 internal board - "xlnx,zynq-zc706" - -- Xilinx ZC770 internal board, with different FMC cards - "xlnx,zynq-zc770-xm010" - "xlnx,zynq-zc770-xm011" - "xlnx,zynq-zc770-xm012" - "xlnx,zynq-zc770-xm013" - ---------------------------------------------------------------- - -Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings - -Boards with ZynqMP SOC based on an ARM Cortex A53 processor -shall have the following properties. - -Required root node properties: - - compatible = "xlnx,zynqmp"; - - -Additional compatible strings: - -- Xilinx internal board zc1232 - "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232" - -- Xilinx internal board zc1254 - "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254" - -- Xilinx internal board zc1275 - "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275" - -- Xilinx internal board zc1751 - "xlnx,zynqmp-zc1751" - -- Xilinx 96boards compatible board zcu100 - "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100" - -- Xilinx evaluation board zcu102 - "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102" - "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102" - "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102" - -- Xilinx evaluation board zcu104 - "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104" - -- Xilinx evaluation board zcu106 - "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106" - -- Xilinx evaluation board zcu111 - "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111" diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml new file mode 100644 index 000000000000..c73b1f5c7f49 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/xilinx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Platforms Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +description: | + Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - adapteva,parallella + - digilent,zynq-zybo + - digilent,zynq-zybo-z7 + - xlnx,zynq-cc108 + - xlnx,zynq-zc702 + - xlnx,zynq-zc706 + - xlnx,zynq-zc770-xm010 + - xlnx,zynq-zc770-xm011 + - xlnx,zynq-zc770-xm012 + - xlnx,zynq-zc770-xm013 + - const: xlnx,zynq-7000 + + - items: + - const: avnet,zynq-microzed + - const: xlnx,zynq-microzed + - const: xlnx,zynq-7000 + + - items: + - const: avnet,zynq-zed + - const: xlnx,zynq-zed + - const: xlnx,zynq-7000 + + - items: + - enum: + - xlnx,zynqmp-zc1751 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1232 + items: + - const: xlnx,zynqmp-zc1232-revA + - const: xlnx,zynqmp-zc1232 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1254 + items: + - const: xlnx,zynqmp-zc1254-revA + - const: xlnx,zynqmp-zc1254 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1275 + items: + - const: xlnx,zynqmp-zc1275-revA + - const: xlnx,zynqmp-zc1275 + - const: xlnx,zynqmp + + - description: Xilinx 96boards compatible board zcu100 + items: + - const: xlnx,zynqmp-zcu100-revC + - const: xlnx,zynqmp-zcu100 + - const: xlnx,zynqmp + + - description: Xilinx 96boards compatible board Ultra96 + items: + - const: avnet,ultra96-rev1 + - const: avnet,ultra96 + - const: xlnx,zynqmp-zcu100-revC + - const: xlnx,zynqmp-zcu100 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu102 + items: + - enum: + - xlnx,zynqmp-zcu102-revA + - xlnx,zynqmp-zcu102-revB + - xlnx,zynqmp-zcu102-rev1.0 + - const: xlnx,zynqmp-zcu102 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu104 + items: + - enum: + - xlnx,zynqmp-zcu104-revA + - xlnx,zynqmp-zcu104-rev1.0 + - const: xlnx,zynqmp-zcu104 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu106 + items: + - enum: + - xlnx,zynqmp-zcu106-revA + - xlnx,zynqmp-zcu106-rev1.0 + - const: xlnx,zynqmp-zcu106 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu111 + items: + - enum: + - xlnx,zynqmp-zcu111-revA + - xlnx,zynqmp-zcu11-rev1.0 + - const: xlnx,zynqmp-zcu111 + - const: xlnx,zynqmp + +... diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt deleted file mode 100644 index 340612794a37..000000000000 --- a/Documentation/devicetree/bindings/arm/zte.txt +++ /dev/null @@ -1,14 +0,0 @@ -ZTE platforms device tree bindings - ---------------------------------------- -- ZX296702 board: - Required root node properties: - - compatible = "zte,zx296702-ad1", "zte,zx296702" - ---------------------------------------- -- ZX296718 SoC: - Required root node properties: - - compatible = "zte,zx296718" - -ZX296718 EVB board: - - "zte,zx296718-evb" diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml new file mode 100644 index 000000000000..2d3fefdccdff --- /dev/null +++ b/Documentation/devicetree/bindings/arm/zte.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/zte.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ZTE platforms device tree bindings + +maintainers: + - Jun Nie <jun.nie@linaro.org> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - zte,zx296702-ad1 + - const: zte,zx296702 + - items: + - enum: + - zte,zx296718-evb + - const: zte,zx296718 + +... diff --git a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt index 87dfb33fb3be..b9d533717dff 100644 --- a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt +++ b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt @@ -1,11 +1,14 @@ -Device tree bindings for Allwinner A64 DE2 bus +Device tree bindings for Allwinner DE2/3 bus The Allwinner A64 DE2 is on a special bus, which needs a SRAM region (SRAM C) -to be claimed for enabling the access. +to be claimed for enabling the access. The DE3 on Allwinner H6 is at the same +situation, and the binding also applies. Required properties: - - compatible: Should contain "allwinner,sun50i-a64-de2" + - compatible: Should be one of: + - "allwinner,sun50i-a64-de2" + - "allwinner,sun50i-h6-de3", "allwinner,sun50i-a64-de2" - reg: A resource specifier for the register space - #address-cells: Must be set to 1 - #size-cells: Must be set to 1 diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt index 91dc2333af01..85a23f551f02 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.txt +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -35,6 +35,7 @@ Required standard properties: "ti,sysc-omap3-sham" "ti,sysc-omap-aes" "ti,sysc-mcasp" + "ti,sysc-dra7-mcasp" "ti,sysc-usb-host-fs" "ti,sysc-dra7-mcan" diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt index 3a880528030e..79511d7bb321 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -11,6 +11,13 @@ Required Properties: - GXM (S912) : "amlogic,meson-gxm-aoclkc" - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" followed by the common "amlogic,meson-gx-aoclkc" +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "xtal" : the platform xtal + * "mpeg-clk" : the main clock controller mother clock (aka clk81) + * "ext-32k-0" : external 32kHz reference #0 if any (optional) + * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only) + * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only) - #clock-cells: should be 1. @@ -40,8 +47,9 @@ ao_sysctrl: sys-ctrl@0 { compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; }; -}; Example: UART controller node that consumes the clock and reset generated by the clock controller: diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index e950599566a9..a6871953bf04 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -9,6 +9,9 @@ Required Properties: "amlogic,gxbb-clkc" for GXBB SoC, "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. +- clocks : list of clock phandle, one for each entry clock-names. +- clock-names : should contain the following: + * "xtal": the platform xtal - #clock-cells: should be 1. @@ -31,6 +34,8 @@ sysctrl: system-controller@0 { clkc: clock-controller { #clock-cells = <1>; compatible = "amlogic,gxbb-clkc"; + clocks = <&xtal>; + clock-names = "xtal"; }; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index b455c5aa9139..4d94091c1d2d 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -9,15 +9,13 @@ Required Properties: - "amlogic,meson8-clkc" for Meson8 (S802) SoCs - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs -- reg: it must be composed by two tuples: - 0) physical base address of the xtal register and length of memory - mapped region. - 1) physical base address of the clock controller and length of memory - mapped region. - - #clock-cells: should be 1. - #reset-cells: should be 1. +Parent node should have the following properties : +- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" +- reg: base address and size of the HHI system control register space. + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be @@ -30,9 +28,8 @@ device tree sources). Example: Clock controller node: - clkc: clock-controller@c1104000 { + clkc: clock-controller { compatible = "amlogic,meson8b-clkc"; - reg = <0xc1108000 0x4>, <0xc1104000 0x460>; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 2ec489eebe72..b646bbcf7f92 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -168,3 +168,19 @@ a shared clock is forbidden. Configuration of common clocks, which affect multiple consumer devices can be similarly specified in the clock provider node. + +==Protected clocks== + +Some platforms or firmwares may not fully expose all the clocks to the OS, such +as in situations where those clks are used by drivers running in ARM secure +execution levels. Such a configuration can be specified in device tree with the +protected-clocks property in the form of a clock specifier list. This property should +only be specified in the node that is providing the clocks being protected: + + clock-controller@a000f000 { + compatible = "vendor,clk95; + reg = <0xa000f000 0x1000> + #clocks-cells = <1>; + ... + protected-clocks = <UART3_CLK>, <SPI5_CLK>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index e1308346e00d..13d36d4c6991 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -13,6 +13,9 @@ Optional properties: management IC (PMIC) triggered via PMIC_STBY_REQ signal. Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should be using "syscon-poweroff" driver instead. +- clocks: list of clock specifiers, must contain an entry for each entry + in clock-names +- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2" The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt new file mode 100644 index 000000000000..a4f8cd478f92 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt @@ -0,0 +1,104 @@ +* Clock bindings for Freescale i.MX7ULP + +i.MX7ULP Clock functions are under joint control of the System +Clock Generation (SCG) modules, Peripheral Clock Control (PCC) +modules, and Core Mode Controller (CMC)1 blocks + +The clocking scheme provides clear separation between M4 domain +and A7 domain. Except for a few clock sources shared between two +domains, such as the System Oscillator clock, the Slow IRC (SIRC), +and and the Fast IRC clock (FIRCLK), clock sources and clock +management are separated and contained within each domain. + +M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. +A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. + +Note: this binding doc is only for A7 clock domain. + +System Clock Generation (SCG) modules: +--------------------------------------------------------------------- +The System Clock Generation (SCG) is responsible for clock generation +and distribution across this device. Functions performed by the SCG +include: clock reference selection, generation of clock used to derive +processor, system, peripheral bus and external memory interface clocks, +source selection for peripheral clocks and control of power saving +clock gating mode. + +Required properties: + +- compatible: Should be "fsl,imx7ulp-scg1". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. +- clocks: Should contain the fixed input clocks. +- clock-names: Should contain the following clock names: + "rosc", "sosc", "sirc", "firc", "upll", "mpll". + +Peripheral Clock Control (PCC) modules: +--------------------------------------------------------------------- +The Peripheral Clock Control (PCC) is responsible for clock selection, +optional division and clock gating mode for peripherals in their +respected power domain + +Required properties: +- compatible: Should be one of: + "fsl,imx7ulp-pcc2", + "fsl,imx7ulp-pcc3". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. +- clocks: Should contain the fixed input clocks. +- clock-names: Should contain the following clock names: + "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", + "apll_pfd1", "apll_pfd0", "upll", "sosc_bus_clk", + "mpll", "firc_bus_clk", "rosc", "spll_bus_clk"; + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +See include/dt-bindings/clock/imx7ulp-clock.h +for the full list of i.MX7ULP clock IDs of each module. + +Examples: + +#include <dt-bindings/clock/imx7ulp-clock.h> + +scg1: scg1@403e0000 { + compatible = "fsl,imx7ulp-scg1; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>, <&mpll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll", "mpll"; + #clock-cells = <1>; +}; + +pcc2: pcc2@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_MIPI_PLL>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "mpll", + "firc_bus_clk", "rosc", "spll_bus_clk"; +}; + +usdhc1: usdhc@40380000 { + compatible = "fsl,imx7ulp-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names ="ipg", "ahb", "per"; + bus-width = <4>; +}; diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt new file mode 100644 index 000000000000..52de8263e012 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt @@ -0,0 +1,20 @@ +* Clock bindings for NXP i.MX8M Quad + +Required properties: +- compatible: Should be "fsl,imx8mq-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "ckil" + - "osc_25m" + - "osc_27m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h +for the full list of i.MX8M Quad clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt new file mode 100644 index 000000000000..965cfa42e025 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt @@ -0,0 +1,51 @@ +* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings + +The Low-Power Clock Gate (LPCG) modules contain a local programming +model to control the clock gates for the peripherals. An LPCG module +is used to locally gate the clocks for the associated peripheral. + +Note: +This level of clock gating is provided after the clocks are generated +by the SCU resources and clock controls. Thus even if the clock is +enabled by these control bits, it might still not be running based +on the base resource. + +Required properties: +- compatible: Should be one of: + "fsl,imx8qxp-lpcg-adma", + "fsl,imx8qxp-lpcg-conn", + "fsl,imx8qxp-lpcg-dc", + "fsl,imx8qxp-lpcg-dsp", + "fsl,imx8qxp-lpcg-gpu", + "fsl,imx8qxp-lpcg-hsio", + "fsl,imx8qxp-lpcg-img", + "fsl,imx8qxp-lpcg-lsio", + "fsl,imx8qxp-lpcg-vpu" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +See the full list of clock IDs from: +include/dt-bindings/clock/imx8qxp-clock.h + +Examples: + +#include <dt-bindings/clock/imx8qxp-clock.h> + +conn_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; +}; + +usdhc1: mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; +}; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 52d9345c9927..8661c3cd3ccf 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -35,6 +35,8 @@ be part of GCC and hence the TSENS properties can also be part of the GCC/clock-controller node. For more details on the TSENS properties please refer Documentation/devicetree/bindings/thermal/qcom-tsens.txt +- protected-clocks : Protected clock specifier list as per common clock + binding. Example: clock-controller@900000 { @@ -55,3 +57,17 @@ Example of GCC with TSENS properties: #reset-cells = <1>; #thermal-sensor-cells = <1>; }; + +Example of GCC with protected-clocks properties: + clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.txt b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt new file mode 100644 index 000000000000..4e5215ef1acd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt @@ -0,0 +1,22 @@ +Qualcomm Graphics Clock & Reset Controller Binding +-------------------------------------------------- + +Required properties : +- compatible : shall contain "qcom,sdm845-gpucc" +- reg : shall contain base register location and length +- #clock-cells : from common clock binding, shall contain 1 +- #reset-cells : from common reset binding, shall contain 1 +- #power-domain-cells : from generic power domain binding, shall contain 1 +- clocks : shall contain the XO clock +- clock-names : shall be "xo" + +Example: + gpucc: clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0x5090000 0x9000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt new file mode 100644 index 000000000000..b9e9787045b9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt @@ -0,0 +1,26 @@ +Qualcomm LPASS Clock Controller Binding +----------------------------------------------- + +Required properties : +- compatible : shall contain "qcom,sdm845-lpasscc" +- #clock-cells : from common clock binding, shall contain 1. +- reg : shall contain base register address and size, + in the order + Index-0 maps to LPASS_CC register region + Index-1 maps to LPASS_QDSP6SS register region + +Optional properties : +- reg-names : register names of LPASS domain + "cc", "qdsp6ss". + +Example: + +The below node has to be defined in the cases where the LPASS peripheral loader +would bring the subsystem out of reset. + + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0x17014000 0x1f004>, <0x17300000 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 4491d1c104aa..87b4949e9bc8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -16,6 +16,7 @@ Required properties : "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" + "qcom,rpmcc-qcs404", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.txt b/Documentation/devicetree/bindings/clock/qcom,videocc.txt index e7c035afa778..8a8622c65c5a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.txt @@ -6,8 +6,6 @@ Required properties : - reg : shall contain base register location and length - #clock-cells : from common clock binding, shall contain 1. - #power-domain-cells : from generic power domain binding, shall contain 1. - -Optional properties : - #reset-cells : from common reset binding, shall contain 1. Example: @@ -16,4 +14,5 @@ Example: reg = <0xab00000 0x10000>; #clock-cells = <1>; #power-domain-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 97f46adac85f..c655f28d5918 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -28,6 +28,12 @@ Required properties: * "fsl,p4080-clockgen" * "fsl,p5020-clockgen" * "fsl,p5040-clockgen" + * "fsl,t1023-clockgen" + * "fsl,t1024-clockgen" + * "fsl,t1040-clockgen" + * "fsl,t1042-clockgen" + * "fsl,t2080-clockgen" + * "fsl,t2081-clockgen" * "fsl,t4240-clockgen" * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt index e94582e8b8a9..41a52c2acffd 100644 --- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -1,5 +1,5 @@ -Allwinner Display Engine 2.0 Clock Control Binding --------------------------------------------------- +Allwinner Display Engine 2.0/3.0 Clock Control Binding +------------------------------------------------------ Required properties : - compatible: must contain one of the following compatibles: @@ -8,6 +8,7 @@ Required properties : - "allwinner,sun8i-v3s-de2-clk" - "allwinner,sun50i-a64-de2-clk" - "allwinner,sun50i-h5-de2-clk" + - "allwinner,sun50i-h6-de3-clk" - reg: Must contain the registers base address and length - clocks: phandle to the clocks feeding the display engine subsystem. diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 47d2e902ced4..e3bd88ae456b 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -22,6 +22,7 @@ Required properties : - "allwinner,sun50i-h5-ccu" - "allwinner,sun50i-h6-ccu" - "allwinner,sun50i-h6-r-ccu" + - "allwinner,suniv-f1c100s-ccu" - "nextthing,gr8-ccu" - reg: Must contain the registers base address and length diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt index d90e17e2428b..a9a2f2fc44f2 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -14,6 +14,8 @@ Optional properties: - label: symbolic name for the connector, - type: size of the connector, should be specified in case of USB-A, USB-B non-fullsize connectors: "mini", "micro". +- self-powered: Set this property if the usb device that has its own power + source. Optional properties for usb-c-connector: - power-role: should be one of "source", "sink" or "dual"(DRP) if typec diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt deleted file mode 100644 index 2aa06ac0fac5..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt +++ /dev/null @@ -1,65 +0,0 @@ -Generic ARM big LITTLE cpufreq driver's DT glue ------------------------------------------------ - -This is DT specific glue layer for generic cpufreq driver for big LITTLE -systems. - -Both required and optional properties listed below must be defined -under node /cpus/cpu@x. Where x is the first cpu inside a cluster. - -FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster -must be present contiguously. Generic DT driver will check only node 'x' for -cpu:x. - -Required properties: -- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt - for details - -Optional properties: -- clock-latency: Specify the possible maximum transition latency for clock, - in unit of nanoseconds. - -Examples: - -cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a15"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@1 { - compatible = "arm,cortex-a15"; - reg = <1>; - next-level-cache = <&L2>; - }; - - cpu@100 { - compatible = "arm,cortex-a7"; - reg = <100>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 950000 - 396000 750000 - 198000 450000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@101 { - compatible = "arm,cortex-a7"; - reg = <101>; - next-level-cache = <&L2>; - }; -}; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt new file mode 100644 index 000000000000..33856947c561 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt @@ -0,0 +1,172 @@ +Qualcomm Technologies, Inc. CPUFREQ Bindings + +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) +SoCs to manage frequency in hardware. It is capable of controlling frequency +for multiple clusters. + +Properties: +- compatible + Usage: required + Value type: <string> + Definition: must be "qcom,cpufreq-hw". + +- clocks + Usage: required + Value type: <phandle> From common clock binding. + Definition: clock handle for XO clock and GPLL0 clock. + +- clock-names + Usage: required + Value type: <string> From common clock binding. + Definition: must be "xo", "alternate". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: Addresses and sizes for the memory of the HW bases in + each frequency domain. +- reg-names + Usage: Optional + Value type: <string> + Definition: Frequency domain name i.e. + "freq-domain0", "freq-domain1". + +- #freq-domain-cells: + Usage: required. + Definition: Number of cells in a freqency domain specifier. + +* Property qcom,freq-domain +Devices supporting freq-domain must set their "qcom,freq-domain" property with +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. + + +Example: + +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch +DCVS state together. + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + soc { + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; +} diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt index 999fb2a810f6..6130e6eb4af8 100644 --- a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt +++ b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt @@ -1,8 +1,12 @@ Arm TrustZone CryptoCell cryptographic engine Required properties: -- compatible: Should be one of: "arm,cryptocell-712-ree", - "arm,cryptocell-710-ree" or "arm,cryptocell-630p-ree". +- compatible: Should be one of - + "arm,cryptocell-713-ree" + "arm,cryptocell-703-ree" + "arm,cryptocell-712-ree" + "arm,cryptocell-710-ree" + "arm,cryptocell-630p-ree" - reg: Base physical address of the engine and length of memory mapped region. - interrupts: Interrupt number for the device. diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt index 76a0b4e80e83..4e4d387e38a5 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -6,6 +6,8 @@ Required properties: - interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ must be supplied, optionally Secure IRQ can be present, but is currently not implemented and not used. +- clocks : Clock reference (only required on some SOCs: 6ull and 6sll). +- clock-names : Must be "dcp". Example: diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt index 057b81335775..c65fd7a7467c 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt @@ -67,6 +67,8 @@ Required properties: Optional properties: - power-domains: Optional phandle to associated power domain as described in the file ../power/power_domain.txt +- amlogic,canvas: phandle to canvas provider node as described in the file + ../soc/amlogic/amlogic,canvas.txt Required nodes: diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt index 3aeb0ec06fd0..ba5469dd09f3 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt @@ -13,6 +13,7 @@ Required properties: - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders + - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt new file mode 100644 index 000000000000..e641f664763d --- /dev/null +++ b/Documentation/devicetree/bindings/display/himax,hx8357d.txt @@ -0,0 +1,26 @@ +Himax HX8357D display panels + +This binding is for display panels using a Himax HX8357D controller in SPI +mode, such as the Adafruit 3.5" TFT for Raspberry Pi. + +Required properties: +- compatible: "adafruit,yx350hv15", "himax,hx8357d" +- dc-gpios: D/C pin +- reg: address of the panel on the SPI bus + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "adafruit,yx350hv15", "himax,hx8357d"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <90>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index dfc743219bd8..9ae946942720 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -106,6 +106,7 @@ Required properties: - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: * "iface" + * "ref" (only required for new DTS files/entries) For 28nm HPM/LP, 28nm 8960 PHYs: - vddio-supply: phandle to vdd-io regulator device node For 20nm PHY: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 43fac0fe09bb..ac8df3b871f9 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -1,11 +1,13 @@ Qualcomm adreno/snapdragon GPU Required properties: -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" +- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or + "amd,imageon-XYZ.W", "amd,imageon" for example: "qcom,adreno-306.0", "qcom,adreno" Note that you need to list the less specific "qcom,adreno" (since this is what the device is matched on), in addition to the more specific with the chip-id. + If "amd,imageon" is used, there should be no top level msm device. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. - clocks: device clocks diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt index 3c341a15ccdc..b07eeb38f709 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp4.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp4.txt @@ -38,6 +38,8 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: * "lut_clk" +- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be + used for LCDC. This is only valid for 18bpp panels. Example: diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 new file mode 100644 index 000000000000..bc6a0c858e23 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 @@ -0,0 +1,12 @@ +AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + +Required properties: +- compatible: should be "auo,g101evn010" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt new file mode 100644 index 000000000000..35bc0c839f49 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt @@ -0,0 +1,12 @@ +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel + +Required properties: +- compatible: should be "bananapi,s070wv20-ct16" +- power-supply: see ./panel-common.txt + +Optional properties: +- enable-gpios: see ./simple-panel.txt +- backlight: see ./simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in ./simple-panel.txt. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt new file mode 100644 index 000000000000..057f7f3f6dbe --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt @@ -0,0 +1,12 @@ +CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel + +Required properties: +- compatible: should be "cdtech,s043wq26h-ct7" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt new file mode 100644 index 000000000000..505615dfa0df --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt @@ -0,0 +1,12 @@ +CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel + +Required properties: +- compatible: should be "cdtech,s070wv95-ct16" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt new file mode 100644 index 000000000000..fbf5dcd15661 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt @@ -0,0 +1,12 @@ +DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel + +Required properties: +- compatible: should be "dlc,dlc1010gig" +- power-supply: See simple-panel.txt + +Optional properties: +- enable-gpios: See simple-panel.txt +- backlight: See simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt new file mode 100644 index 000000000000..a89f9c830a85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt @@ -0,0 +1,42 @@ +Binding for Olimex Ltd. LCD-OLinuXino bridge panel. + +This device can be used as bridge between a host controller and LCD panels. +Currently supported LCDs are: + - LCD-OLinuXino-4.3TS + - LCD-OLinuXino-5 + - LCD-OLinuXino-7 + - LCD-OLinuXino-10 + +The panel itself contains: + - AT24C16C EEPROM holding panel identification and timing requirements + - AR1021 resistive touch screen controller (optional) + - FT5x6 capacitive touch screnn controller (optional) + - GT911/GT928 capacitive touch screen controller (optional) + +The above chips share same I2C bus. The EEPROM is factory preprogrammed with +device information (id, serial, etc.) and timing requirements. + +Touchscreen bingings can be found in these files: + - input/touchscreen/goodix.txt + - input/touchscreen/edt-ft5x06.txt + - input/touchscreen/ar1021.txt + +Required properties: + - compatible: should be "olimex,lcd-olinuxino" + - reg: address of the configuration EEPROM, should be <0x50> + - power-supply: phandle of the regulator that provides the supply voltage + +Optional properties: + - enable-gpios: GPIO pin to enable or disable the panel + - backlight: phandle of the backlight device attacked to the panel + +Example: +&i2c2 { + panel@50 { + compatible = "olimex,lcd-olinuxino"; + reg = <0x50>; + power-supply = <®_vcc5v0>; + enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt new file mode 100644 index 000000000000..b94e366f451b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt @@ -0,0 +1,30 @@ +Samsung S6D16D0 4" 864x480 AMOLED panel + +Required properties: + - compatible: should be: + "samsung,s6d16d0", + - reg: the virtual channel number of a DSI peripheral + - vdd1-supply: I/O voltage supply + - reset-gpios: a GPIO spec for the reset pin (active low) + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt index f5e3c6f2095a..40f3d7c713bb 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt @@ -1,47 +1,70 @@ TPO TPG110 Panel ================ -This binding builds on the DPI bindings, adding a few properties -as a superset of a DPI. See panel-dpi.txt for the required DPI -bindings. +This panel driver is a component that acts as an intermediary +between an RGB output and a variety of panels. The panel +driver is strapped up in electronics to the desired resolution +and other properties, and has a control interface over 3WIRE +SPI. By talking to the TPG110 over SPI, the strapped properties +can be discovered and the hardware is therefore mostly +self-describing. + + +--------+ +SPI -> | TPO | -> physical display +RGB -> | TPG110 | + +--------+ + +If some electrical strap or alternate resolution is desired, +this can be set up by taking software control of the display +over the SPI interface. The interface can also adjust +for properties of the display such as gamma correction and +certain electrical driving levels. + +The TPG110 does not know the physical dimensions of the panel +connected, so this needs to be specified in the device tree. + +It requires a GPIO line for control of its reset line. + +The serial protocol has line names that resemble I2C but the +protocol is not I2C but 3WIRE SPI. Required properties: -- compatible : "tpo,tpg110" +- compatible : one of: + "ste,nomadik-nhk15-display", "tpo,tpg110" + "tpo,tpg110" - grestb-gpios : panel reset GPIO -- scen-gpios : serial control enable GPIO -- scl-gpios : serial control clock line GPIO -- sda-gpios : serial control data line GPIO +- width-mm : see display/panel/panel-common.txt +- height-mm : see display/panel/panel-common.txt + +The device needs to be a child of an SPI bus, see +spi/spi-bus.txt. The SPI child must set the following +properties: +- spi-3wire +- spi-max-frequency = <3000000>; +as these are characteristics of this device. -Required nodes: -- Video port for DPI input, see panel-dpi.txt -- Panel timing for DPI setup, see panel-dpi.txt +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. Example ------- -panel { - compatible = "tpo,tpg110", "panel-dpi"; - grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; - scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; +panel: display@0 { + compatible = "tpo,tpg110"; + reg = <0>; + spi-3wire; + /* 320 ns min period ~= 3 MHz */ + spi-max-frequency = <3000000>; + /* Width and height from data sheet */ + width-mm = <116>; + height-mm = <87>; + grestb-gpios = <&foo_gpio 5 GPIO_ACTIVE_LOW>; backlight = <&bl>; port { nomadik_clcd_panel: endpoint { - remote-endpoint = <&nomadik_clcd_pads>; + remote-endpoint = <&foo>; }; }; - - panel-timing { - clock-frequency = <33200000>; - hactive = <800>; - hback-porch = <216>; - hfront-porch = <40>; - hsync-len = <1>; - vactive = <480>; - vback-porch = <35>; - vfront-porch = <10>; - vsync-len = <1>; - }; }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 9de67be632d1..3c855d9f2719 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -4,7 +4,9 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU + - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU + - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -52,7 +54,9 @@ corresponding to each DU output. Port0 Port1 Port2 Port3 ----------------------------------------------------------------------------- R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - + R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - + R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index adc94fc3c9f8..39143424a474 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -13,6 +13,7 @@ Required properties: - compatible: should be one of the following: "rockchip,rk3288-dw-hdmi" + "rockchip,rk3328-dw-hdmi" "rockchip,rk3399-dw-hdmi" - reg: See dw_hdmi.txt. - reg-io-width: See dw_hdmi.txt. Shall be 4. @@ -34,6 +35,8 @@ Optional properties - clock-names: May contain "cec" as defined in dw_hdmi.txt. - clock-names: May contain "grf", power for grf io. - clock-names: May contain "vpll", external clock for some hdmi phy. +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "hdmi" if phys references an external phy. Example: diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 7854fff4fc16..f426bdb42f18 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -79,6 +79,7 @@ Required properties: - compatible: value must be one of: * "allwinner,sun8i-a83t-dw-hdmi" * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi" + * "allwinner,sun50i-h6-dw-hdmi" - reg: base address and size of memory-mapped region - reg-io-width: See dw_hdmi.txt. Shall be 1. - interrupts: HDMI interrupt number @@ -86,9 +87,14 @@ Required properties: * iahb: the HDMI bus clock * isfr: the HDMI register clock * tmds: TMDS clock + * cec: HDMI CEC clock (H6 only) + * hdcp: HDCP clock (H6 only) + * hdcp-bus: HDCP bus clock (H6 only) - clock-names: the clock names mentioned above - - resets: phandle to the reset controller - - reset-names: must be "ctrl" + - resets: + * ctrl: HDMI controller reset + * hdcp: HDCP reset (H6 only) + - reset-names: reset names mentioned above - phys: phandle to the DWC HDMI PHY - phy-names: must be "phy" @@ -109,6 +115,7 @@ Required properties: * allwinner,sun8i-h3-hdmi-phy * allwinner,sun8i-r40-hdmi-phy * allwinner,sun50i-a64-hdmi-phy + * allwinner,sun50i-h6-hdmi-phy - reg: base address and size of memory-mapped region - clocks: phandles to the clocks feeding the HDMI PHY * bus: the HDMI PHY interface clock @@ -158,6 +165,7 @@ Required properties: * allwinner,sun9i-a80-tcon-tv * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd" * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv" + * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. @@ -220,24 +228,26 @@ It allows display pipeline to be configured in very different ways: \ [3] TCON-TV1 [1] - TVE1/RGB Note that both TCON TOP references same physical unit. Both mixers can be -connected to any TCON. +connected to any TCON. Not all TCON TOP variants support all features. Required properties: - compatible: value must be one of: * allwinner,sun8i-r40-tcon-top + * allwinner,sun50i-h6-tcon-top - reg: base address and size of the memory-mapped region. - clocks: phandle to the clocks feeding the TCON TOP * bus: TCON TOP interface clock * tcon-tv0: TCON TV0 clock - * tve0: TVE0 clock - * tcon-tv1: TCON TV1 clock - * tve1: TVE0 clock - * dsi: MIPI DSI clock + * tve0: TVE0 clock (R40 only) + * tcon-tv1: TCON TV1 clock (R40 only) + * tve1: TVE0 clock (R40 only) + * dsi: MIPI DSI clock (R40 only) - clock-names: clock name mentioned above - resets: phandle to the reset line driving the TCON TOP - #clock-cells : must contain 1 - clock-output-names: Names of clocks created for TCON TV0 channel clock, - TCON TV1 channel clock and DSI channel clock, in that order. + TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in + that order. - ports: A ports node with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should @@ -381,6 +391,7 @@ Required properties: * allwinner,sun8i-v3s-de2-mixer * allwinner,sun50i-a64-de2-mixer-0 * allwinner,sun50i-a64-de2-mixer-1 + * allwinner,sun50i-h6-de3-mixer-0 - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the mixer * bus: the mixer interface clock @@ -415,9 +426,10 @@ Required properties: * allwinner,sun8i-v3s-display-engine * allwinner,sun9i-a80-display-engine * allwinner,sun50i-a64-display-engine + * allwinner,sun50i-h6-display-engine - allwinner,pipelines: list of phandle to the display engine - frontends (DE 1.0) or mixers (DE 2.0) available. + frontends (DE 1.0) or mixers (DE 2.0/3.0) available. Example: diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt new file mode 100644 index 000000000000..f39c77ee36ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt @@ -0,0 +1,59 @@ +Truly model NT35597 DSI display driver + +The Truly NT35597 is a generic display driver, currently only configured +for use in the 2K display on the Qualcomm SDM845 MTP board. + +Required properties: +- compatible: should be "truly,nt35597-2K-display" +- vdda-supply: phandle of the regulator that provides the supply voltage + Power IC supply +- vdispp-supply: phandle of the regulator that provides the supply voltage + for positive LCD bias +- vdispn-supply: phandle of the regulator that provides the supply voltage + for negative LCD bias +- reset-gpios: phandle of gpio for reset line + This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names + (active low) +- mode-gpios: phandle of the gpio for choosing the mode of the display + for single DSI or Dual DSI + This should be low for dual DSI and high for single DSI mode +- ports: This device has two video ports driven by two DSIs. Their connections + are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + - port@0: DSI input port driven by master DSI + - port@1: DSI input port driven by secondary DSI + +Example: + + dsi@ae94000 { + panel@0 { + compatible = "truly,nt35597-2K-display"; + reg = <0>; + vdda-supply = <&pm8998_l14>; + vdispp-supply = <&lab_regulator>; + vdispn-supply = <&ibb_regulator>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&dpu_dsi_active>; + pinctrl-1 = <&dpu_dsi_suspend>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt new file mode 100644 index 000000000000..3fe0961bcf64 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt @@ -0,0 +1,33 @@ +* Mediatek UART APDMA Controller + +Required properties: +- compatible should contain: + * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA + * "mediatek,mt6577-uart-dma" for MT6577 and all of the above + +- reg: The base address of the APDMA register bank. + +- interrupts: A single interrupt specifier. + +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: The APDMA clock for register accesses + +Examples: + + apdma: dma-controller@11000380 { + compatible = "mediatek,mt2712-uart-dma"; + reg = <0 0x11000380 0 0x400>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_AP_DMA>; + clock-names = "apdma"; + #dma-cells = <1>; + }; + diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml new file mode 100644 index 000000000000..9175d67f355d --- /dev/null +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +# All the top-level keys are standard json-schema keywords except for +# 'maintainers' and 'select' + +# $id is a unique idenifier based on the filename. There may or may not be a +# file present at the URL. +$id: "http://devicetree.org/schemas/example-schema.yaml#" +# $schema is the meta-schema this schema should be validated with. +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: An example schema annotated with jsonschema details + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + A more detailed multi-line description of the binding. + + Details about the hardware device and any links to datasheets can go here. + + Literal blocks are marked with the '|' at the beginning. The end is marked by + indentation less than the first line of the literal block. Lines also cannot + begin with a tab character. + +select: false + # 'select' is a schema applied to a DT node to determine if this binding + # schema should be applied to the node. It is optional and by default the + # possible compatible strings are extracted and used to match. + + # In this case, a 'false' schema will never match. + +properties: + # A dictionary of DT properties for this binding schema + compatible: + # More complicated schema can use oneOf (XOR), anyOf (OR), or allOf (AND) + # to handle different conditions. + # In this case, it's needed to handle a variable number of values as there + # isn't another way to express a constraint of the last string value. + # The boolean schema must be a list of schemas. + oneOf: + - items: + # items is a list of possible values for the property. The number of + # values is determined by the number of elements in the list. + # Order in lists is significant, order in dicts is not + # Must be one of the 1st enums followed by the 2nd enum + # + # Each element in items should be 'enum' or 'const' + - enum: + - vendor,soc4-ip + - vendor,soc3-ip + - vendor,soc2-ip + - enum: + - vendor,soc1-ip + # additionalItems being false is implied + # minItems/maxItems equal to 2 is implied + - items: + # 'const' is just a special case of an enum with a single possible value + - const: vendor,soc1-ip + + reg: + # The core schema already checks that reg values are numbers, so device + # specific schema don't need to do those checks. + # The description of each element defines the order and implicitly defines + # the number of reg entries. + items: + - description: core registers + - description: aux registers + # minItems/maxItems equal to 2 is implied + + reg-names: + # The core schema enforces this is a string array + items: + - const: core + - const: aux + + clocks: + # Cases that have only a single entry just need to express that with maxItems + maxItems: 1 + description: bus clock + + clock-names: + items: + - const: bus + + interrupts: + # Either 1 or 2 interrupts can be present + minItems: 1 + maxItems: 2 + items: + - description: tx or combined interrupt + - description: rx interrupt + description: + A variable number of interrupts warrants a description of what conditions + affect the number of interrupts. Otherwise, descriptions on standard + properties are not necessary. + + interrupt-names: + # minItems must be specified here because the default would be 2 + minItems: 1 + maxItems: 2 + items: + - const: tx irq + - const: rx irq + + # Property names starting with '#' must be quoted + '#interrupt-cells': + # A simple case where the value must always be '2'. + # The core schema handles that this must be a single integer. + const: 2 + + interrupt-controller: true + # The core checks this is a boolean, so just have to list it here to be + # valid for this binding. + + clock-frequency: + # The type is set in the core schema. Per device schema only need to set + # constraints on the possible values. + minimum: 100 + maximum: 400000 + # The value that should be used if the property is not present + default: 200 + + foo-gpios: + maxItems: 1 + description: A connection of the 'foo' gpio line. + + vendor,int-property: + description: Vendor specific properties must have a description + # 'allOf' is the json-schema way of subclassing a schema. Here the base + # type schema is referenced and then additional constraints on the values + # are added. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [2, 4, 6, 8, 10] + + vendor,bool-property: + description: Vendor specific properties must have a description + # boolean properties is one case where the json-schema 'type' keyword + # can be used directly + type: boolean + + vendor,string-array-property: + description: Vendor specific properties should reference a type in the + core schema. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - items: + - enum: [ foo, bar ] + - enum: [ baz, boo ] + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +examples: + # Examples are now compiled with dtc + - | + node@1000 { + compatible = "vendor,soc4-ip", "vendor,soc1-ip"; + reg = <0x1000 0x80>, + <0x3000 0x80>; + reg-names = "core", "aux"; + interrupts = <10>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt new file mode 100644 index 000000000000..1fa66065acc6 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt @@ -0,0 +1,57 @@ +Intel Service Layer Driver for Stratix10 SoC +============================================ +Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard +processor system (HPS) and Secure Device Manager (SDM). When the FPGA is +configured from HPS, there needs to be a way for HPS to notify SDM the +location and size of the configuration data. Then SDM will get the +configuration data from that location and perform the FPGA configuration. + +To meet the whole system security needs and support virtual machine requesting +communication with SDM, only the secure world of software (EL3, Exception +Layer 3) can interface with SDM. All software entities running on other +exception layers must channel through the EL3 software whenever it needs +service from SDM. + +Intel Stratix10 service layer driver, running at privileged exception level +(EL1, Exception Layer 1), interfaces with the service providers and provides +the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer +driver also manages secure monitor call (SMC) to communicate with secure monitor +code running in EL3. + +Required properties: +------------------- +The svc node has the following mandatory properties, must be located under +the firmware node. + +- compatible: "intel,stratix10-svc" +- method: smc or hvc + smc - Secure Monitor Call + hvc - Hypervisor Call +- memory-region: + phandle to the reserved memory node. See + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + for details + +Example: +------- + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + service_reserved: svcbuffer@0 { + compatible = "shared-dma-pool"; + reg = <0x0 0x0 0x0 0x1000000>; + alignment = <0x1000>; + no-map; + }; + }; + + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + }; + }; diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt new file mode 100644 index 000000000000..6e03f79287fb --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt @@ -0,0 +1,17 @@ +Intel Stratix10 SoC FPGA Manager + +Required properties: +The fpga_mgr node has the following mandatory property, must be located under +firmware/svc node. + +- compatible : should contain "intel,stratix10-soc-fpga-mgr" + +Example: + + firmware { + svc { + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt new file mode 100644 index 000000000000..99ca9862a586 --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt @@ -0,0 +1,16 @@ +Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC) +--------------------------------------------------------------------- + +This is the binding for the P9 On-Chip Controller accessed over FSI from a +service processor. See fsi.txt for details on bindings for FSI slave and CFAM +nodes. The OCC is not an FSI slave device itself, rather it is accessed +through the SBE fifo. + +Required properties: + - compatible = "ibm,p9-occ" + +Examples: + + occ { + compatible = "ibm,p9-occ"; + }; diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt new file mode 100644 index 000000000000..706ef00f5c64 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt @@ -0,0 +1,43 @@ +Cadence GPIO controller bindings + +Required properties: +- compatible: should be "cdns,gpio-r1p02". +- reg: the register base address and size. +- #gpio-cells: should be 2. + * first cell is the GPIO number. + * second cell specifies the GPIO flags, as defined in + <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH + and GPIO_ACTIVE_LOW flags are supported. +- gpio-controller: marks the device as a GPIO controller. +- clocks: should contain one entry referencing the peripheral clock driving + the GPIO controller. + +Optional properties: +- ngpios: integer number of gpio lines supported by this controller, up to 32. +- interrupts: interrupt specifier for the controllers interrupt. +- interrupt-controller: marks the device as an interrupt controller. When + defined, interrupts, interrupt-parent and #interrupt-cells + are required. +- interrupt-cells: should be 2. + * first cell is the GPIO number you want to use as an IRQ source. + * second cell specifies the IRQ type, as defined in + <dt-bindings/interrupt-controller/irq.h>. + Currently only level sensitive IRQs are supported. + + +Example: + gpio0: gpio-controller@fd060000 { + compatible = "cdns,gpio-r1p02"; + reg =<0xfd060000 0x1000>; + + clocks = <&gpio_clk>; + + interrupt-parent = <&gic>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt index 8d950522e7fa..e57b2cb28f6c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -5,6 +5,8 @@ Required properties: - "ti,omap2-gpio" for OMAP2 controllers - "ti,omap3-gpio" for OMAP3 controllers - "ti,omap4-gpio" for OMAP4 controllers +- reg : Physical base address of the controller and length of memory mapped + region. - gpio-controller : Marks the device node as a GPIO controller. - #gpio-cells : Should be two. - first cell is the pin number @@ -18,6 +20,8 @@ Required properties: 2 = high-to-low edge triggered. 4 = active high level-sensitive. 8 = active low level-sensitive. +- interrupts : The interrupt the controller is rising as output when an + interrupt occures OMAP specific properties: - ti,hwmods: Name of the hwmod associated to the GPIO: @@ -29,11 +33,13 @@ OMAP specific properties: Example: -gpio4: gpio4 { +gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio4"; + reg = <0x44e07000 0x1000>; + ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + interrupts = <96>; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt index 0ccbae44019c..ae254aadee35 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt @@ -24,6 +24,12 @@ Required properties for GPIO node: 4 = active high level-sensitive. 8 = active low level-sensitive. +Optional properties: +-clocks: Must contain an entry for each entry in clock-names. + See common clock-bindings.txt for details. +-clock-names: A list of clock names. For imx7ulp, it must contain + "gpio", "port". + Note: Each GPIO port should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt index eb7cdd69e10b..627efc78ecf2 100644 --- a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt @@ -3,12 +3,24 @@ NXP LPC18xx/43xx GPIO controller Device Tree Bindings Required properties: - compatible : Should be "nxp,lpc1850-gpio" -- reg : Address and length of the register set for the device -- clocks : Clock specifier (see clock bindings for details) -- gpio-controller : Marks the device node as a GPIO controller. -- #gpio-cells : Should be two - - First cell is the GPIO line number - - Second cell is used to specify polarity +- reg : List of addresses and lengths of the GPIO controller + register sets +- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and + "gpio-gpoup1-ic" +- clocks : Phandle and clock specifier pair for GPIO controller +- resets : Phandle and reset specifier pair for GPIO controller +- gpio-controller : Marks the device node as a GPIO controller +- #gpio-cells : Should be two: + - The first cell is the GPIO line number + - The second cell is used to specify polarity +- interrupt-controller : Marks the device node as an interrupt controller +- #interrupt-cells : Should be two: + - The first cell is an interrupt number within + 0..9 range, for GPIO pin interrupts it is equal + to 'nxp,gpio-pin-interrupt' property value of + GPIO pin configuration, 8 is for GPIO GROUP0 + interrupt, 9 is for GPIO GROUP1 interrupt + - The second cell is used to specify interrupt type Optional properties: - gpio-ranges : Mapping between GPIO and pinctrl @@ -19,21 +31,29 @@ Example: gpio: gpio@400f4000 { compatible = "nxp,lpc1850-gpio"; - reg = <0x400f4000 0x4000>; + reg = <0x400f4000 0x4000>, <0x40087000 0x1000>, + <0x40088000 0x1000>, <0x40089000 0x1000>; + reg-names = "gpio", "gpio-pin-ic", + "gpio-group0-ic", "gpio-gpoup1-ic"; clocks = <&ccu1 CLK_CPU_GPIO>; + resets = <&rgu 28>; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, ... <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; }; gpio_joystick { - compatible = "gpio-keys-polled"; + compatible = "gpio-keys"; ... - button@0 { + button0 { ... + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>; gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 2889bbcd7416..f3f2c468c1b6 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -8,6 +8,7 @@ Required Properties: - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller. - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller. - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller. + - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller. - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index 7276b50c3506..839dd32ffe11 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -43,7 +43,7 @@ gpio: gpio@20000 { #address-cells = <1>; #size-cells = <0>; - porta: gpio-controller@0 { + porta: gpio@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -55,7 +55,7 @@ gpio: gpio@20000 { interrupts = <0>; }; - portb: gpio-controller@1 { + portb: gpio@1 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index 63cd91176a68..3f128e4f95c6 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -11,6 +11,7 @@ Required properties: + allwinner,sun4i-a10-mali + allwinner,sun7i-a20-mali + allwinner,sun8i-h3-mali + + allwinner,sun50i-a64-mali + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali @@ -73,6 +74,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - allwinner,sun50i-a64-mali + Required properties: + * resets: phandle to the reset line for the GPU + - allwinner,sun50i-h5-mali Required properties: * resets: phandle to the reset line for the GPU diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt new file mode 100644 index 000000000000..1ecd03f3da4d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt @@ -0,0 +1,25 @@ +adm1275 properties + +Required properties: +- compatible: Must be one of the supported compatible strings: + - "adi,adm1075" for adm1075 + - "adi,adm1272" for adm1272 + - "adi,adm1275" for adm1275 + - "adi,adm1276" for adm1276 + - "adi,adm1278" for adm1278 + - "adi,adm1293" for adm1293 + - "adi,adm1294" for adm1294 +- reg: I2C address + +Optional properties: + +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohm + +Example: + +adm1272@10 { + compatible = "adi,adm1272"; + reg = <0x10>; + shunt-resistor-micro-ohms = <500>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt index 97581266e329..c76a7ac47c34 100644 --- a/Documentation/devicetree/bindings/hwmon/lm90.txt +++ b/Documentation/devicetree/bindings/hwmon/lm90.txt @@ -23,6 +23,7 @@ Required node properties: "onnn,nct1008" "winbond,w83l771" "nxp,sa56004" + "ti,tmp451" - reg: I2C bus address of the device diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index c3b9c4cfe8df..37f18d684f6a 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -4,6 +4,7 @@ NTC Thermistor hwmon sensors Requires node properties: - "compatible" value : one of "epcos,b57330v2103" + "epcos,b57891s0103" "murata,ncp15wb473" "murata,ncp18wb473" "murata,ncp21wb473" diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt index 8c4b10df86d9..54d4beed4ee5 100644 --- a/Documentation/devicetree/bindings/hwmon/tmp108.txt +++ b/Documentation/devicetree/bindings/hwmon/tmp108.txt @@ -7,6 +7,10 @@ Requires node properties: - compatible : "ti,tmp108" - reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b. +Optional properties: +- interrupts: Reference to the TMP108 alert interrupt. +- #thermal-sensor-cells: should be set to 0. + Example: tmp108@48 { compatible = "ti,tmp108"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt deleted file mode 100644 index 38a05562d1d2..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Device-Tree bindings for i2c gpio driver - -Required properties: - - compatible = "i2c-gpio"; - - sda-gpios: gpio used for the sda signal, this should be flagged as - active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) - from <dt-bindings/gpio/gpio.h> since the signal is by definition - open drain. - - scl-gpios: gpio used for the scl signal, this should be flagged as - active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) - from <dt-bindings/gpio/gpio.h> since the signal is by definition - open drain. - -Optional properties: - - i2c-gpio,scl-output-only: scl as output only - - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - - i2c-gpio,timeout-ms: timeout to get data - -Deprecated properties, do not use in new device tree sources: - - gpios: sda and scl gpio, alternative for {sda,scl}-gpios - - i2c-gpio,sda-open-drain: this means that something outside of our - control has put the GPIO line used for SDA into open drain mode, and - that something is not the GPIO chip. It is essentially an - inconsistency flag. - - i2c-gpio,scl-open-drain: this means that something outside of our - control has put the GPIO line used for SCL into open drain mode, and - that something is not the GPIO chip. It is essentially an - inconsistency flag. - -Example nodes: - -#include <dt-bindings/gpio/gpio.h> - -i2c@0 { - compatible = "i2c-gpio"; - sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rv3029c2@56 { - compatible = "rv3029c2"; - reg = <0x56>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml new file mode 100644 index 000000000000..da6129090a8e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for GPIO bitbanged I2C + +maintainers: + - Wolfram Sang <wolfram@the-dreams.de> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - const: i2c-gpio + + sda-gpios: + description: + gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + maxItems: 1 + + scl-gpios: + description: + gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + maxItems: 1 + + i2c-gpio,scl-output-only: + description: scl as output only + type: boolean + + i2c-gpio,delay-us: + description: delay between GPIO operations (may depend on each platform) + $ref: /schemas/types.yaml#/definitions/uint32 + + i2c-gpio,timeout-ms: + description: timeout to get data + $ref: /schemas/types.yaml#/definitions/uint32 + + # Deprecated properties, do not use in new device tree sources: + gpios: + minItems: 2 + maxItems: 2 + description: sda and scl gpio, alternative for {sda,scl}-gpios + + i2c-gpio,sda-open-drain: + # Generate a warning if present + not: true + description: this means that something outside of our control has put + the GPIO line used for SDA into open drain mode, and that something is + not the GPIO chip. It is essentially an inconsistency flag. + + i2c-gpio,scl-open-drain: + # Generate a warning if present + not: true + description: this means that something outside of our control has put the + GPIO line used for SCL into open drain mode, and that something is not + the GPIO chip. It is essentially an inconsistency flag. + +required: + - compatible + - sda-gpios + - scl-gpios + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt index 7e49839d4124..4b90ba9f31b7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt @@ -1,8 +1,12 @@ I2C for OMAP platforms Required properties : -- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c" - or "ti,omap4-i2c" +- compatible : Must be + "ti,omap2420-i2c" for OMAP2420 SoCs + "ti,omap2430-i2c" for OMAP2430 SoCs + "ti,omap3-i2c" for OMAP3 SoCs + "ti,omap4-i2c" for OMAP4+ SoCs + "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based) - #address-cells = <1>; - #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt new file mode 100644 index 000000000000..5dc5d2e2573d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt @@ -0,0 +1,25 @@ +Device-tree bindings for I2C-based On-Chip Controller hwmon device +------------------------------------------------------------------ + +Required properties: + - compatible = "ibm,p8-occ-hwmon"; + - reg = <I2C address>; : I2C bus address + +Examples: + + i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + < more properties > + + occ-hwmon@1 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; + + occ-hwmon@2 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x51>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt new file mode 100644 index 000000000000..69da2115abdc --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt @@ -0,0 +1,43 @@ +Bindings for cadence I3C master block +===================================== + +Required properties: +-------------------- +- compatible: shall be "cdns,i3c-master" +- clocks: shall reference the pclk and sysclk +- clock-names: shall contain "pclk" and "sysclk" +- interrupts: the interrupt line connected to this I3C master +- reg: I3C master registers + +Mandatory properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- #address-cells: shall be set to 1 +- #size-cells: shall be set to 0 + +Optional properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- i2c-scl-hz +- i3c-scl-hz + +I3C device connected on the bus follow the generic description (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details). + +Example: + + i3c-master@0d040000 { + compatible = "cdns,i3c-master"; + clocks = <&coreclock>, <&i3csysclock>; + clock-names = "pclk", "sysclk"; + interrupts = <3 0>; + reg = <0x0d040000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-hz = <100000>; + + nunchuk: nunchuk@52 { + compatible = "nintendo,nunchuk"; + reg = <0x52 0x80000010 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt new file mode 100644 index 000000000000..ab729a0a86ae --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/i3c.txt @@ -0,0 +1,138 @@ +Generic device tree bindings for I3C busses +=========================================== + +This document describes generic bindings that should be used to describe I3C +busses in a device tree. + +Required properties +------------------- + +- #address-cells - should be <3>. Read more about addresses below. +- #size-cells - should be <0>. +- compatible - name of the I3C master controller driving the I3C bus + +For other required properties e.g. to describe register sets, +clocks, etc. check the binding documentation of the specific driver. +The node describing an I3C bus should be named i3c-master. + +Optional properties +------------------- + +These properties may not be supported by all I3C master drivers. Each I3C +master bindings should specify which of them are supported. + +- i3c-scl-hz: frequency of the SCL signal used for I3C transfers. + When undefined the core sets it to 12.5MHz. + +- i2c-scl-hz: frequency of the SCL signal used for I2C transfers. + When undefined, the core looks at LVR (Legacy Virtual Register) + values of I2C devices described in the device tree to determine + the maximum I2C frequency. + +I2C devices +=========== + +Each I2C device connected to the bus should be described in a subnode. All +properties described in Documentation/devicetree/bindings/i2c/i2c.txt are +valid here, but several new properties have been added. + +New constraint on existing properties: +-------------------------------------- +- reg: contains 3 cells + + first cell : still encoding the I2C address + + + second cell: shall be 0 + + + third cell: shall encode the I3C LVR (Legacy Virtual Register) + bit[31:8]: unused/ignored + bit[7:5]: I2C device index. Possible values + * 0: I2C device has a 50 ns spike filter + * 1: I2C device does not have a 50 ns spike filter but supports high + frequency on SCL + * 2: I2C device does not have a 50 ns spike filter and is not tolerant + to high frequencies + * 3-7: reserved + + bit[4]: tell whether the device operates in FM (Fast Mode) or FM+ mode + * 0: FM+ mode + * 1: FM mode + + bit[3:0]: device type + * 0-15: reserved + +The I2C node unit-address should always match the first cell of the reg +property: <device-type>@<i2c-address>. + +I3C devices +=========== + +All I3C devices are supposed to support DAA (Dynamic Address Assignment), and +are thus discoverable. So, by default, I3C devices do not have to be described +in the device tree. +This being said, one might want to attach extra resources to these devices, +and those resources may have to be described in the device tree, which in turn +means we have to describe I3C devices. + +Another use case for describing an I3C device in the device tree is when this +I3C device has a static I2C address and we want to assign it a specific I3C +dynamic address before the DAA takes place (so that other devices on the bus +can't take this dynamic address). + +The I3C device should be names <device-type>@<static-i2c-address>,<i3c-pid>, +where device-type is describing the type of device connected on the bus +(gpio-controller, sensor, ...). + +Required properties +------------------- +- reg: contains 3 cells + + first cell : encodes the static I2C address. Should be 0 if the device does + not have one (0 is not a valid I2C address). + + + second and third cells: should encode the ProvisionalID. The second cell + contains the manufacturer ID left-shifted by 1. + The third cell contains ORing of the part ID + left-shifted by 16, the instance ID left-shifted + by 12 and the extra information. This encoding is + following the PID definition provided by the I3C + specification. + +Optional properties +------------------- +- assigned-address: dynamic address to be assigned to this device. This + property is only valid if the I3C device has a static + address (first cell of the reg property != 0). + + +Example: + + i3c-master@d040000 { + compatible = "cdns,i3c-master"; + clocks = <&coreclock>, <&i3csysclock>; + clock-names = "pclk", "sysclk"; + interrupts = <3 0>; + reg = <0x0d040000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + i2c-scl-hz = <100000>; + + /* I2C device. */ + nunchuk: nunchuk@52 { + compatible = "nintendo,nunchuk"; + reg = <0x52 0x0 0x10>; + }; + + /* I3C device with a static I2C address. */ + thermal_sensor: sensor@68,39200144004 { + reg = <0x68 0x392 0x144004>; + assigned-address = <0xa>; + }; + + /* + * I3C device without a static I2C address but requiring + * resources described in the DT. + */ + sensor@0,39200154004 { + reg = <0x0 0x392 0x154004>; + clocks = <&clock_provider 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt new file mode 100644 index 000000000000..5020eb71eb8d --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt @@ -0,0 +1,41 @@ +Bindings for Synopsys DesignWare I3C master block +================================================= + +Required properties: +-------------------- +- compatible: shall be "snps,dw-i3c-master-1.00a" +- clocks: shall reference the core_clk +- interrupts: the interrupt line connected to this I3C master +- reg: Offset and length of I3C master registers + +Mandatory properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- #address-cells: shall be set to 3 +- #size-cells: shall be set to 0 + +Optional properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- i2c-scl-hz +- i3c-scl-hz + +I3C device connected on the bus follow the generic description (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details). + +Example: + + i3c-master@2000 { + compatible = "snps,dw-i3c-master-1.00a"; + #address-cells = <3>; + #size-cells = <0>; + reg = <0x02000 0x1000>; + interrupts = <0>; + clocks = <&i3cclk>; + + eeprom@57{ + compatible = "atmel,24c01"; + reg = <0x57 0x0 0x10>; + pagesize = <0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt index dfdce67826ba..764e28ec1a0a 100644 --- a/Documentation/devicetree/bindings/iio/accel/lis302.txt +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -64,7 +64,7 @@ Optional properties for all bus drivers: Example for a SPI device node: - lis302@0 { + accelerometer@0 { compatible = "st,lis302dl-spi"; reg = <0>; spi-max-frequency = <1000000>; @@ -89,7 +89,7 @@ Example for a SPI device node: Example for a I2C device node: - lis331dlh: lis331dlh@18 { + lis331dlh: accelerometer@18 { compatible = "st,lis331dlh", "st,lis3lv02d"; reg = <0x18>; Vdd-supply = <&lis3_reg>; diff --git a/Documentation/devicetree/bindings/iio/adc/ad7949.txt b/Documentation/devicetree/bindings/iio/adc/ad7949.txt new file mode 100644 index 000000000000..c7f5057356b1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ad7949.txt @@ -0,0 +1,16 @@ +* Analog Devices AD7949/AD7682/AD7689 + +Required properties: + - compatible: Should be one of + * "adi,ad7949" + * "adi,ad7682" + * "adi,ad7689" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + +Example: +adc@0 { + compatible = "adi,ad7949"; + reg = <0>; + vref-supply = <&vdd_supply>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/adc.txt b/Documentation/devicetree/bindings/iio/adc/adc.txt new file mode 100644 index 000000000000..5bbaa330a250 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adc.txt @@ -0,0 +1,23 @@ +Common ADCs properties + +Optional properties for child nodes: +- bipolar : Boolean, if set the channel is used in bipolar mode. +- diff-channels : Differential channels muxed for this ADC. The first value + specifies the positive input pin, the second value the negative + input pin. + +Example: + adc@0 { + compatible = "some,adc"; + ... + channel@0 { + bipolar; + diff-channels = <0 1>; + ... + }; + + channel@1 { + diff-channels = <2 3>; + ... + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt new file mode 100644 index 000000000000..416273dce569 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt @@ -0,0 +1,75 @@ +Analog Devices AD7124 ADC device driver + +Required properties for the AD7124: + - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt + - clocks: phandle to the master clock (mclk) + see: Documentation/devicetree/bindings/clock/clock-bindings.txt + - clock-names: Must be "mclk". + - interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + + Required properties: + * #address-cells: Must be 1. + * #size-cells: Must be 0. + + Subnode(s) represent the external channels which are connected to the ADC. + Each subnode represents one channel and has the following properties: + Required properties: + * reg: The channel number. It can have up to 4 channels on ad7124-4 + and 8 channels on ad7124-8, numbered from 0 to 15. + * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt + + Optional properties: + * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt + * adi,reference-select: Select the reference source to use when + converting on the the specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−). + 1: REFIN2(+)/REFIN2(−). + 3: AVDD + If this field is left empty, internal reference is selected. + +Optional properties: + - refin1-supply: refin1 supply can be used as reference for conversion. + - refin2-supply: refin2 supply can be used as reference for conversion. + - avdd-supply: avdd supply can be used as reference for conversion. + +Example: + adc@0 { + compatible = "adi,ad7124-4"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <25 2>; + interrupt-parent = <&gpio>; + refin1-supply = <&adc_vref>; + clocks = <&ad7124_mclk>; + clock-names = "mclk"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + adi,reference-select = <0>; + }; + + channel@1 { + reg = <1>; + bipolar; + diff-channels = <2 3>; + adi,reference-select = <0>; + }; + + channel@2 { + reg = <2>; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + diff-channels = <6 7>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt index 54b823f3a453..325090e43ce6 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt @@ -22,6 +22,12 @@ Required properties: - vref-supply: the regulator supply for the ADC reference voltage - #io-channel-cells: must be 1, see ../iio-bindings.txt +Optional properties: +- nvmem-cells: phandle to the temperature_calib eFuse cells +- nvmem-cell-names: if present (to enable the temperature sensor + calibration) this must contain "temperature_calib" + + Example: saradc: adc@8680 { compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt index b3c86f4ac7cd..c81993f8d8c3 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt @@ -140,6 +140,10 @@ VADC_GND_REF and VADC_VDD_VADC. Example: +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <linux/irq.h> +/* ... */ + /* VADC node */ pmic_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; @@ -151,7 +155,7 @@ Example: io-channel-ranges; /* Channel node */ - usb_id_nopull { + adc-chan@VADC_LR_MUX10_USB_ID { reg = <VADC_LR_MUX10_USB_ID>; qcom,decimation = <512>; qcom,ratiometric; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt index 6c49db7f8ad2..a10c1f89037d 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt @@ -11,7 +11,7 @@ New driver handles the following Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 and s5pv210 controllers. + for exynos4412/5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for @@ -28,6 +28,8 @@ Required properties: the ADC in s3c2443 and compatibles Must be "samsung,s3c6410-adc" for the ADC in s3c6410 and compatibles + Must be "samsung,s5pv210-adc" for + the ADC in s5pv210 and compatibles - reg: List of ADC register address range - The base address and range of ADC register - The base address and range of ADC_PHY register (every diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt index daa2b2c29428..c07ce1a3f5c4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt @@ -1,7 +1,14 @@ * Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip Required properties: - - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021" + - compatible: Should be one of: + - "ti,adc128s052" + - "ti,adc122s021" + - "ti,adc122s051" + - "ti,adc122s101" + - "ti,adc124s021" + - "ti,adc124s051" + - "ti,adc124s101" - reg: spi chip select number for the device - vref-supply: The regulator supply for ADC reference voltage diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt new file mode 100644 index 000000000000..e5a507db5e01 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt @@ -0,0 +1,23 @@ +TI DAC7311 device tree bindings + +Required properties: +- compatible: must be set to: + * "ti,dac7311" + * "ti,dac6311" + * "ti,dac5311" +- reg: spi chip select number for the device +- vref-supply: The regulator supply for ADC reference voltage + +Optional properties: +- spi-max-frequency: Max SPI frequency to use + +Example: + + spi_master { + dac@0 { + compatible = "ti,dac7311"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vdd_supply>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 879322ad50fd..69d53d98d0f0 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -13,6 +13,7 @@ Required properties: Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). +- st,pullups : enable/disable internal i2c controller pullup resistors. - drive-open-drain: the interrupt/data ready line will be configured as open drain, which is useful if several sensors share the same interrupt line. This is a boolean property. diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4035.txt b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt new file mode 100644 index 000000000000..c07c7f052556 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt @@ -0,0 +1,18 @@ +VISHAY VCNL4035 - Ambient Light and proximity sensor + +Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf + +Required properties: + + -compatible: should be "vishay,vcnl4035" + -reg: I2C address of the sensor, should be 0x60 + -interrupts: interrupt mapping for GPIO IRQ (level active low) + +Example: + +light-sensor@60 { + compatible = "vishay,vcnl4035"; + reg = <0x60>; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt b/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt new file mode 100644 index 000000000000..bdd40bcaaa1f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt @@ -0,0 +1,27 @@ +* FREESCALE MAG3110 magnetometer sensor + +Required properties: + + - compatible : should be "fsl,mag3110" + - reg : the I2C address of the magnetometer + +Optional properties: + + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + + - vdd-supply: phandle to the regulator that provides power to the sensor. + - vddio-supply: phandle to the regulator that provides power to the sensor's IO. + +Example: + +magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt new file mode 100644 index 000000000000..497c932e9e39 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt @@ -0,0 +1,20 @@ +* PNI RM3100 3-axis magnetometer sensor + +Required properties: + +- compatible : should be "pni,rm3100" +- reg : the I2C address or SPI chip select number of the sensor. + +Optional properties: + +- interrupts: data ready (DRDY) from the chip. + The interrupts can be triggered on level high. + +Example: + +rm3100: rm3100@20 { + compatible = "pni,rm3100"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt new file mode 100644 index 000000000000..566711b9950c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt @@ -0,0 +1,28 @@ +* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer + +Datasheet publicly available at: +http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp41010" + "microchip,mcp41050" + "microchip,mcp41100" + "microchip,mcp42010" + "microchip,mcp42050" + "microchip,mcp42100" + +Example: +potentiometer@0 { + compatible = "microchip,mcp41010"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt new file mode 100644 index 000000000000..477d41fa6467 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt @@ -0,0 +1,31 @@ +Analog Devices AD2S90 Resolver-to-Digital Converter + +https://www.analog.com/en/products/ad2s90.html + +Required properties: + - compatible: should be "adi,ad2s90" + - reg: SPI chip select number for the device + - spi-max-frequency: set maximum clock frequency, must be 830000 + - spi-cpol and spi-cpha: + Either SPI mode (0,0) or (1,1) must be used, so specify none or both of + spi-cpha, spi-cpol. + +See for more details: + Documentation/devicetree/bindings/spi/spi-bus.txt + +Note about max frequency: + Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns + delay is expected between the application of a logic LO to CS and the + application of SCLK, as also specified. And since the delay is not + implemented in the spi code, to satisfy it, SCLK's period should be at most + 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives + roughly 830000Hz. + +Example: +resolver@0 { + compatible = "adi,ad2s90"; + reg = <0>; + spi-max-frequency = <830000>; + spi-cpol; + spi-cpha; +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 6f626f73417e..ddcb95509599 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -48,6 +48,7 @@ Accelerometers: - st,lis3l02dq - st,lis2dw12 - st,lis3dhh +- st,lis3de Gyroscopes: - st,l3g4200d-gyro @@ -67,6 +68,7 @@ Magnetometers: - st,lsm303dlm-magn - st,lis3mdl-magn - st,lis2mdl +- st,lsm9ds1-magn Pressure sensors: - st,lps001wp-press diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt index 2bb2626fdb78..1ca6cc5ebf8e 100644 --- a/Documentation/devicetree/bindings/input/input-reset.txt +++ b/Documentation/devicetree/bindings/input/input-reset.txt @@ -12,7 +12,7 @@ The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define a set of keys. Required property: -sysrq-reset-seq: array of Linux keycodes, one keycode per cell. +keyset: array of Linux keycodes, one keycode per cell. Optional property: timeout-ms: duration keys must be pressed together in milliseconds before diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt index b290ca150d30..404352524c3a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt @@ -2,7 +2,9 @@ Allwinner Sunxi Interrupt Controller Required properties: -- compatible : should be "allwinner,sun4i-a10-ic" +- compatible : should be one of the following: + "allwinner,sun4i-a10-ic" + "allwinner,suniv-f1c100s-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 3ea78c4ef887..b83bb8249074 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -7,7 +7,9 @@ Interrupts (LPI). Main node required properties: -- compatible : should at least contain "arm,gic-v3". +- compatible : should at least contain "arm,gic-v3" or either + "qcom,msm8996-gic-v3", "arm,gic-v3" for msm8996 SoCs + to address SoC specific bugs/quirks - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. Must be a single cell with a value of at least 3. diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt new file mode 100644 index 000000000000..45790ce6f5b9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt @@ -0,0 +1,34 @@ +Freescale IRQSTEER Interrupt multiplexer + +Required properties: + +- compatible: should be: + - "fsl,imx8m-irqsteer" + - "fsl,imx-irqsteer" +- reg: Physical base address and size of registers. +- interrupts: Should contain the parent interrupt line used to multiplex the + input interrupts. +- clocks: Should contain one clock for entry in clock-names + see Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names: + - "ipg": main logic clock +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- fsl,channel: The output channel that all input IRQs should be steered into. +- fsl,irq-groups: Number of IRQ groups managed by this controller instance. + Each group manages 64 input interrupts. + +Example: + + interrupt-controller@32e2d000 { + compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer"; + reg = <0x32e2d000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; + clock-names = "ipg"; + fsl,channel = <0>; + fsl,irq-groups = <1>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt index 8b53273cb22f..608fee15a4cf 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt @@ -5,7 +5,7 @@ Required properties: "mrvl,mmp2-mux-intc" - reg : Address and length of the register set of the interrupt controller. If the interrupt controller is intc, address and length means the range - of the whold interrupt controller. If the interrupt controller is mux-intc, + of the whole interrupt controller. If the interrupt controller is mux-intc, address and length means one register. Since address of mux-intc is in the range of intc. mux-intc is secondary interrupt controller. - reg-names : Name of the register set of the interrupt controller. It's diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt new file mode 100644 index 000000000000..e0062aebf025 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt @@ -0,0 +1,61 @@ +RDA Micro RDA8810PL Interrupt Controller + +The interrupt controller in RDA8810PL SoC is a custom interrupt controller +which supports up to 32 interrupts. + +Required properties: + +- compatible: Should be "rda,8810pl-intc". +- reg: Specifies base physical address of the registers set. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. + +The interrupt sources are as follows: + +ID Name +------------ +0: PULSE_DUMMY +1: I2C +2: NAND_NFSC +3: SDMMC1 +4: SDMMC2 +5: SDMMC3 +6: SPI1 +7: SPI2 +8: SPI3 +9: UART1 +10: UART2 +11: UART3 +12: GPIO1 +13: GPIO2 +14: GPIO3 +15: KEYPAD +16: TIMER +17: TIMEROS +18: COMREG0 +19: COMREG1 +20: USB +21: DMC +22: DMA +23: CAMERA +24: GOUDA +25: GPU +26: VPU_JPG +27: VPU_HOST +28: VOC +29: AUIFC0 +30: AUIFC1 +31: L2CC + +Example: + apb@20800000 { + compatible = "simple-bus"; + ... + intc: interrupt-controller@0 { + compatible = "rda,8810pl-intc"; + reg = <0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt index 6a36bf66d932..cd01b2292ec6 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -14,6 +14,10 @@ Required properties: (only needed for exti controller with multiple exti under same parent interrupt: st,stm32-exti and st,stm32h7-exti) +Optional properties: + +- hwlocks: reference to a phandle of a hardware spinlock provider node. + Example: exti: interrupt-controller@40013c00 { diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt new file mode 100644 index 000000000000..78b464ae2672 --- /dev/null +++ b/Documentation/devicetree/bindings/media/aspeed-video.txt @@ -0,0 +1,26 @@ +* Device tree bindings for Aspeed Video Engine + +The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can +capture and compress video data from digital or analog sources. + +Required properties: + - compatible: "aspeed,ast2400-video-engine" or + "aspeed,ast2500-video-engine" + - reg: contains the offset and length of the VE memory region + - clocks: clock specifiers for the syscon clocks associated with + the VE (ordering must match the clock-names property) + - clock-names: "vclk" and "eclk" + - resets: reset specifier for the syscon reset associated with + the VE + - interrupts: the interrupt associated with the VE on this platform + +Example: + +video-engine@1e700000 { + compatible = "aspeed,ast2500-video-engine"; + reg = <0x1e700000 0x20000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + resets = <&syscon ASPEED_RESET_VIDEO>; + interrupts = <7>; +}; diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt index a089a0c1ff05..bce0705df953 100644 --- a/Documentation/devicetree/bindings/media/cedrus.txt +++ b/Documentation/devicetree/bindings/media/cedrus.txt @@ -11,6 +11,8 @@ Required properties: - "allwinner,sun7i-a20-video-engine" - "allwinner,sun8i-a33-video-engine" - "allwinner,sun8i-h3-video-engine" + - "allwinner,sun50i-a64-video-engine" + - "allwinner,sun50i-h5-video-engine" - reg : register base and length of VE; - clocks : list of clock specifiers, corresponding to entries in the clock-names property; @@ -31,7 +33,7 @@ reserved-memory { ranges; /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { + cma_pool: default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; alloc-ranges = <0x4a000000 0x6000000>; diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt index 6b910036b57e..d0bed6fa901a 100644 --- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt +++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt @@ -9,8 +9,14 @@ Required Properties: - clocks: reference to the master clock. - clock-names: shall be "mclk". -For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Optional endpoint properties: +- pclk-sample: For information see ../video-interfaces.txt. The value is set to + 0 if it isn't specified. Example: @@ -21,11 +27,10 @@ Example: clocks = <&mclk>; clock-names = "mclk"; - remote = <&pxa_camera>; port { mt9m111_1: endpoint { - bus-width = <8>; remote-endpoint = <&pxa_camera>; + pclk-sample = <1>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt new file mode 100644 index 000000000000..f11f28a5fda4 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt @@ -0,0 +1,53 @@ +* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor + +The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with +an active array size of 4224H x 3200V. It is programmable through an I2C +interface. +Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum +throughput of 1.2Gbps/lane. + + +Required Properties: +- compatible: Shall be "sony,imx214". +- reg: I2C bus address of the device. Depending on how the sensor is wired, + it shall be <0x10> or <0x1a>; +- enable-gpios: GPIO descriptor for the enable pin. +- vdddo-supply: Chip digital IO regulator (1.8V). +- vdda-supply: Chip analog regulator (2.7V). +- vddd-supply: Chip digital core regulator (1.12V). +- clocks: Reference to the xclk clock. +- clock-frequency: Frequency of the xclk clock. + +Optional Properties: +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt + +The imx214 device node shall contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Required Properties on endpoint: +- data-lanes: check ../video-interfaces.txt +- link-frequencies: check ../video-interfaces.txt +- remote-endpoint: check ../video-interfaces.txt + +Example: + + camera-sensor@1a { + compatible = "sony,imx214"; + reg = <0x1a>; + vdddo-supply = <&pm8994_lvs1>; + vddd-supply = <&camera_vddd_1v12>; + vdda-supply = <&pm8994_l17>; + lens-focus = <&ad5820>; + enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + clocks = <&mmcc CAMSS_MCLK0_CLK>; + clock-frequency = <24000000>; + port { + imx214_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <480000000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt index 00d0d1bf7647..b602c4c025e7 100644 --- a/Documentation/devicetree/bindings/media/qcom,venus.txt +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt @@ -53,7 +53,8 @@ * Subnodes The Venus video-codec node must contain two subnodes representing -video-decoder and video-encoder. +video-decoder and video-encoder, and one optional firmware subnode. +Firmware subnode is needed when the platform does not have TrustZone. Every of video-encoder or video-decoder subnode should have: @@ -79,6 +80,13 @@ Every of video-encoder or video-decoder subnode should have: power domain which is responsible for collapsing and restoring power to the subcore. +The firmware subnode must have: + +- iommus: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. + * An Example video-codec@1d00000 { compatible = "qcom,msm8916-venus"; @@ -105,4 +113,8 @@ Every of video-encoder or video-decoder subnode should have: clock-names = "core"; power-domains = <&mmcc VENUS_CORE1_GDSC>; }; + + video-firmware { + iommus = <&apps_iommu 0x10b2 0x0>; + }; }; diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index d329a4e8ac58..0dd84a183ca7 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -24,6 +24,8 @@ on Gen3 platforms to a CSI-2 receiver. - "renesas,vin-r8a7796" for the R8A7796 device - "renesas,vin-r8a77965" for the R8A77965 device - "renesas,vin-r8a77970" for the R8A77970 device + - "renesas,vin-r8a77980" for the R8A77980 device + - "renesas,vin-r8a77990" for the R8A77990 device - "renesas,vin-r8a77995" for the R8A77995 device - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt index 2d385b65b275..541d936b62e8 100644 --- a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt +++ b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt @@ -12,6 +12,8 @@ Mandatory properties - "renesas,r8a7796-csi2" for the R8A7796 device. - "renesas,r8a77965-csi2" for the R8A77965 device. - "renesas,r8a77970-csi2" for the R8A77970 device. + - "renesas,r8a77980-csi2" for the R8A77980 device. + - "renesas,r8a77990-csi2" for the R8A77990 device. - reg: the register base and size for the device registers - interrupts: the interrupt for the device diff --git a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt index fc5aa263abe5..98a72c0b3c64 100644 --- a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt +++ b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt @@ -5,6 +5,10 @@ Required properties: - reg: SPI chip select number for the device. - spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz). +Optional properties: +- vcc-supply: Optional phandle to the vcc regulator to power the adapter, + as described in the file ../regulator/regulator.txt + Example: cxd2880@0 { diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt new file mode 100644 index 000000000000..d4ab34f2240c --- /dev/null +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt @@ -0,0 +1,59 @@ +Allwinner V3s Camera Sensor Interface +------------------------------------- + +Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. + +Required properties: + - compatible: value must be one of: + * "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-v3s-csi" + - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the CSI + * bus: the CSI interface clock + * mod: the CSI module clock + * ram: the CSI DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset line driving the CSI + +The CSI node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Endpoint node properties for CSI +--------------------------------- +See the video-interfaces.txt for a detailed description of these properties. +- remote-endpoint : (required) a phandle to the bus receiver's endpoint + node +- bus-width: : (required) must be 8, 10, 12 or 16 +- pclk-sample : (optional) (default: sample on falling edge) +- hsync-active : (required; parallel-only) +- vsync-active : (required; parallel-only) + +Example: + +csi1: csi@1cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + + port { + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + + /* If hsync-active/vsync-active are missing, + embedded BT.656 sync is used */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt index 4c33b29dc660..add95367640b 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt @@ -10,6 +10,8 @@ Properties: and chosen using the ramcode board selector. If omitted, only one set of tables can be present and said tables will be used irrespective of ram-code configuration. +- interrupts : Should contain EMC General interrupt. +- clocks : Should contain EMC clock. Child device nodes describe the memory settings for different configurations and clock rates. @@ -20,6 +22,8 @@ Example: #size-cells = < 0 >; compatible = "nvidia,tegra20-emc"; reg = <0x7000f4000 0x200>; + interrupts = <0 78 0x04>; + clocks = <&tegra_car TEGRA20_CLK_EMC>; } diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt index a43d26d41e04..9d32762c47e1 100644 --- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt +++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt @@ -1,15 +1,32 @@ Binding for Synopsys IntelliDDR Multi Protocol Memory Controller -This controller has an optional ECC support in half-bus width (16-bit) -configuration. The ECC controller corrects one bit error and detects -two bit errors. +The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit +bus width configurations. + +The Zynq DDR ECC controller has an optional ECC support in half-bus width +(16-bit) configuration. + +These both ECC controllers correct single bit ECC errors and detect double bit +ECC errors. Required properties: - - compatible: Should be 'xlnx,zynq-ddrc-a05' - - reg: Base address and size of the controllers memory area + - compatible: One of: + - 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller + - 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller + - reg: Should contain DDR controller registers location and length. + +Required properties for "xlnx,zynqmp-ddrc-2.40a": + - interrupts: Property with a value describing the interrupt number. Example: memory-controller@f8006000 { compatible = "xlnx,zynq-ddrc-a05"; reg = <0xf8006000 0x1000>; }; + + mc: memory-controller@fd070000 { + compatible = "xlnx,zynqmp-ddrc-2.40a"; + reg = <0x0 0xfd070000 0x0 0x30000>; + interrupt-parent = <&gic>; + interrupts = <0 112 4>; + }; diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 188f0373d441..2af4ff95d6bc 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -32,6 +32,15 @@ Required properties: - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 +Supported common regulator properties, see ../regulator/regulator.txt for +more information: +- regulator-ramp-delay: sets the ramp up delay in uV/us + AXP20x/DCDC2: 1600, 800 + AXP20x/LDO3: 1600, 800 +- regulator-soft-start: enable the output at the lowest possible voltage and + only then set the desired voltage + AXP20x/LDO3: software-based implementation + Optional properties: - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt index 01fdc33a41d0..bb7e896cb644 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -10,7 +10,7 @@ such as network interfaces, crypto accelerator instances, L2 switches, etc. For an overview of the DPAA2 architecture and fsl-mc bus see: -Documentation/networking/dpaa2/overview.rst +Documentation/networking/device_drivers/freescale/dpaa2/overview.rst As described in the above overview, all DPAA2 objects in a DPRC share the same hardware "isolation context" and a 10-bit value called an ICID diff --git a/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt new file mode 100644 index 000000000000..985e90736780 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt @@ -0,0 +1,29 @@ +* QEMU PVPANIC MMIO Configuration bindings + +QEMU's emulation / virtualization targets provide the following PVPANIC +MMIO Configuration interface on the "virt" machine. +type: + +- a read-write, 16-bit wide data register. + +QEMU exposes the data register to guests as memory mapped registers. + +Required properties: + +- compatible: "qemu,pvpanic-mmio". +- reg: the MMIO region used by the device. + * Bytes 0x0 Write panic event to the reg when guest OS panics. + * Bytes 0x1 Reserved. + +Example: + +/ { + #size-cells = <0x2>; + #address-cells = <0x2>; + + pvpanic-mmio@9060000 { + compatible = "qemu,pvpanic-mmio"; + reg = <0x0 0x9060000 0x0 0x2>; + }; +}; + diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index e2effe17f05e..1edbb049cccb 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -16,6 +16,10 @@ Required Properties: - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY For this device it is strongly suggested to include arasan,soc-ctl-syscon. - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY + Note: This binding has been deprecated and moved to [5]. + + [5] Documentation/devicetree/bindings/mmc/sdhci-am654.txt + - reg: From mmc bindings: Register location and length. - clocks: From clock bindings: Handles to clock inputs. - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 3e29050ec769..9201a7d8d7b0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -16,6 +16,7 @@ Required properties: "fsl,imx6sl-usdhc" "fsl,imx6sx-usdhc" "fsl,imx7d-usdhc" + "fsl,imx8qxp-usdhc" Optional properties: - fsl,wp-controller : Indicate to use controller internal write protection diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt new file mode 100644 index 000000000000..15dbbbace27e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt @@ -0,0 +1,36 @@ +Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs + +The bindings follow the mmc[1], clock[2] and interrupt[3] bindings. +Only deviations are documented here. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + [2] Documentation/devicetree/bindings/clock/clock-bindings.txt + [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Required Properties: + - compatible: should be "ti,am654-sdhci-5.1" + - reg: Must be two entries. + - The first should be the sdhci register space + - The second should the subsystem/phy register space + - clocks: Handles to the clock inputs. + - clock-names: Tuple including "clk_xin" and "clk_ahb" + - interrupts: Interrupt specifiers + - ti,otap-del-sel: Output Tap Delay select + - ti,trm-icp: DLL trim select + - ti,driver-strength-ohm: driver strength in ohms. + Valid values are 33, 40, 50, 66 and 100 ohms. + +Example: + + sdhci0: sdhci@4f80000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; + power-domains = <&k3_pds 47>; + clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + sdhci-caps-mask = <0x80000007 0x0>; + mmc-ddr-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 502b3b851ebb..da4edb146a98 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -4,15 +4,28 @@ This file documents differences between the core properties in mmc.txt and the properties used by the sdhci-msm driver. Required properties: -- compatible: Should contain: +- compatible: Should contain a SoC-specific string and a IP version string: + version strings: "qcom,sdhci-msm-v4" for sdcc versions less than 5.0 - "qcom,sdhci-msm-v5" for sdcc versions >= 5.0 + "qcom,sdhci-msm-v5" for sdcc version 5.0 For SDCC version 5.0.0, MCI registers are removed from SDCC interface and some registers are moved to HC. New compatible string is added to support this change - "qcom,sdhci-msm-v5". + full compatible strings with SoC and version: + "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" + "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" + "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" + NOTE that some old device tree files may be floating around that only + have the string "qcom,sdhci-msm-v4" without the SoC compatible string + but doing that should be considered a deprecated practice. + - reg: Base address and length of the register in the following order: - Host controller register map (required) - - SD Core register map (required) + - SD Core register map (required for msm-v4 and below) - interrupts: Should contain an interrupt-specifiers for the interrupts: - Host controller interrupt (required) - pinctrl-names: Should contain only one value - "default". @@ -29,7 +42,7 @@ Required properties: Example: sdhc_1: sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; interrupts = <0 123 0>; bus-width = <8>; @@ -46,7 +59,7 @@ Example: }; sdhc_2: sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; interrupts = <0 125 0>; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt index 393848c2138e..72c4dec7e1db 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt @@ -2,6 +2,8 @@ Refer to mmc.txt for standard MMC bindings. +For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning. + Required properties: - compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers Should be "ti,k2g-sdhci" for K2G diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 27f2eab2981d..2b4f17ca9087 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -13,12 +13,14 @@ Required properties: - compatible: should contain one or more of the following: "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC + "renesas,sdhi-r7s9210" - SDHI IP on R7S9210 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC "renesas,sdhi-r8a7744" - SDHI IP on R8A7744 SoC "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC "renesas,sdhi-r8a774a1" - SDHI IP on R8A774A1 SoC + "renesas,sdhi-r8a774c0" - SDHI IP on R8A774C0 SoC "renesas,sdhi-r8a77470" - SDHI IP on R8A77470 SoC "renesas,sdhi-mmc-r8a77470" - SDHI/MMC IP on R8A77470 SoC "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC @@ -56,7 +58,7 @@ Required properties: "core" and "cd". If the controller only has 1 clock, naming is not required. Devices which have more than 1 clock are listed below: - 2: R7S72100 + 2: R7S72100, R7S9210 Optional properties: - pinctrl-names: should be "default", "state_uhs" diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt index 232fa12e90ef..7df0dcaccb7d 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt @@ -29,6 +29,8 @@ file systems on embedded devices. - use-advanced-sector-protection: boolean to enable support for the advanced sector protection (Spansion: PPB - Persistent Protection Bits) locking. + - addr-gpios : (optional) List of GPIO descriptors that will be used to + address the MSBs address lines. The order goes from LSB to MSB. For JEDEC compatible devices, the following additional properties are defined: diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt new file mode 100644 index 000000000000..fd0ebe4e3415 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt @@ -0,0 +1,27 @@ +RedBoot FLASH Image System (FIS) Partitions +=========================================== + +The FLASH Image System (FIS) directory is a flash description +format closely associated with the RedBoot boot loader. + +It uses one single flash eraseblock in the flash to store an index of +all images in the flash. + +This block size will vary depending on flash but is typically +32 KB in size. + +Required properties: +- compatible : (required) must be "redboot-fis" +- fis-index-block : (required) a index to the eraseblock containing + the FIS directory on this device. On a flash memory with 32KB + eraseblocks, 0 means the first eraseblock at 0x00000000, 1 means the + second eraseblock at 0x00008000 and so on. + +Example: + +flash@0 { + partitions { + compatible = "redboot-fis"; + fis-index-block = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt index 4194ff7e6ee6..c26f4e11037c 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -10,6 +10,8 @@ device the slave device is attached to. Required properties: - compatible: should contain one of the following: + * "brcm,bcm20702a1" + * "brcm,bcm4330-bt" * "brcm,bcm43438-bt" Optional properties: @@ -18,8 +20,13 @@ Optional properties: - shutdown-gpios: GPIO specifier, used to enable the BT module - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor - - clocks: clock specifier if external clock provided to the controller - - clock-names: should be "extclk" + - clocks: 1 or 2 clocks as defined in clock-names below, in that order + - clock-names: names for clock inputs, matching the clocks given + - "extclk": deprecated, replaced by "txco" + - "txco": external reference clock (not a standalone crystal) + - "lpo": external low power 32.768 kHz clock + - vbat-supply: phandle to regulator supply for VBAT + - vddio-supply: phandle to regulator supply for VDDIO Example: diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index bfc0c433654f..bc77477c6878 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -24,6 +24,14 @@ Optional properties: if this property is present then controller is assumed to be big endian. +- fsl,stop-mode: register bits of stop mode control, the format is + <&gpr req_gpr req_bit ack_gpr ack_bit>. + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset of CAN stop request. + req_bit is the bit offset of CAN stop request. + ack_gpr is the gpr register offset of CAN stop acknowledge. + ack_bit is the bit offset of CAN stop acknowledge. + Example: can@1c000 { diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt index 903a78da65be..3a9926f99937 100644 --- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt +++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt @@ -17,7 +17,7 @@ Example: reg = <1>; clocks = <&clk32m>; interrupt-parent = <&gpio4>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; vdd-supply = <®5v0>; xceiver-supply = <®5v0>; }; diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index cc4372842bf3..9936b9ee67c3 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -5,6 +5,7 @@ Required properties: - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -14,26 +15,32 @@ Required properties: "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. + "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 + compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by the generic version. - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 + devices. + phandles and clock specifiers for 3 CAN clock inputs for every other + SoC. +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". + 3 clock input name strings for every other SoC: "clkp1", "clkp2", + "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" -compatible: -In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock -and can be used by both CAN and CAN FD controller at the same time. It needs to -be scaled to maximum frequency if any of these controllers use it. This is done +Required properties for R8A7795, R8A7796 and R8A77965: +For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can +be used by both CAN and CAN FD controller at the same time. It needs to be +scaled to maximum frequency if any of these controllers use it. This is done using the below properties: - assigned-clocks: phandle of clkp2(CANFD) clock. @@ -42,8 +49,9 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : Externally input clock + <0x1> : Peripheral clock (clkp2) (not supported by + RZ/G2 devices) + <0x3> : External input clock Example ------- diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt index 060e2d46bad9..100cc40b8510 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt +++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt @@ -6,6 +6,7 @@ Required properties: - "xlnx,zynq-can-1.0" for Zynq CAN controllers - "xlnx,axi-can-1.00.a" for Axi CAN controllers - "xlnx,canfd-1.0" for CAN FD controllers + - "xlnx,canfd-2.0" for CAN FD 2.0 controllers - reg : Physical base address and size of the controller registers map. - interrupts : Property with a value describing the interrupt diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index b3acebe08eb0..3264e1978d25 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -22,7 +22,8 @@ Required properties: - cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection device. See also cpsw-phy-sel.txt for it's binding. Note that in legacy cases cpsw-phy-sel may be - a child device instead of a phandle. + a child device instead of a phandle + (DEPRECATED, use phys property instead). Optional properties: - ti,hwmods : Must be "cpgmac0" @@ -44,6 +45,7 @@ Optional properties: Slave Properties: Required properties: - phy-mode : See ethernet.txt file in the same directory +- phys : phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt) Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports @@ -85,12 +87,14 @@ Examples: phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; @@ -114,11 +118,13 @@ Examples: phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 3ceeb8de1196..35694c0c376b 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -7,7 +7,7 @@ limitations. Current Binding --------------- -Switches are true Linux devices and can be probes by any means. Once +Switches are true Linux devices and can be probed by any means. Once probed, they register to the DSA framework, passing a node pointer. This node is expected to fulfil the following binding, and may contain additional properties as required by the device it is diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index ac145b885e95..0f407fb371ce 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -8,6 +8,10 @@ Required properties: - "microchip,ksz9477" - "microchip,ksz9897" +Optional properties: + +- reset-gpios : Should be a gpio specifier for a reset line + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt index 5bb3a18cc38d..54c66d0611cb 100644 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -10,6 +10,7 @@ Required properties: "allwinner,sun8i-r40-gmac" "allwinner,sun8i-v3s-emac" "allwinner,sun50i-a64-emac" + "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac" - reg: address and length of the register for the device. - interrupts: interrupt for the device - interrupt-names: must be "macirq" diff --git a/Documentation/devicetree/bindings/net/icplus-ip101ag.txt b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt new file mode 100644 index 000000000000..a784592bbb15 --- /dev/null +++ b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt @@ -0,0 +1,19 @@ +IC Plus Corp. IP101A / IP101G Ethernet PHYs + +There are different models of the IP101G Ethernet PHY: +- IP101GR (32-pin QFN package) +- IP101G (die only, no package) +- IP101GA (48-pin LQFP package) + +There are different models of the IP101A Ethernet PHY (which is the +predecessor of the IP101G): +- IP101A (48-pin LQFP package) +- IP101AH (48-pin LQFP package) + +Optional properties for the IP101GR (32-pin QFN package): + +- icplus,select-rx-error: + pin 21 ("RXER/INTR_32") will output the receive error status. + interrupts are not routed outside the PHY in this mode. +- icplus,select-interrupt: + pin 21 ("RXER/INTR_32") will output the interrupt signal. diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt new file mode 100644 index 000000000000..8a08621a5b54 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt @@ -0,0 +1,78 @@ +MediaTek DWMAC glue layer controller + +This file documents platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +The device node has following properties. + +Required properties: +- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC +- reg: Address and length of the register set for the device +- interrupts: Should contain the MAC interrupts +- interrupt-names: Should contain a list of interrupt names corresponding to + the interrupts in the interrupts property, if available. + Should be "macirq" for the main MAC IRQ +- clocks: Must contain a phandle for each entry in clock-names. +- clock-names: The name of the clock listed in the clocks property. These are + "axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC +- mac-address: See ethernet.txt in the same directory +- phy-mode: See ethernet.txt in the same directory +- mediatek,pericfg: A phandle to the syscon node that control ethernet + interface and timing delay. + +Optional properties: +- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0. + It should be defined for RGMII/MII interface. +- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0. + It should be defined for RGMII/MII/RMII interface. +Both delay properties need to be a multiple of 170 for RGMII interface, +or will round down. Range 0~31*170. +Both delay properties need to be a multiple of 550 for MII/RMII interface, +or will round down. Range 0~31*550. + +- mediatek,rmii-rxc: boolean property, if present indicates that the RMII + reference clock, which is from external PHYs, is connected to RXC pin + on MT2712 SoC. + Otherwise, is connected to TXC pin. +- mediatek,txc-inverse: boolean property, if present indicates that + 1. tx clock will be inversed in MII/RGMII case, + 2. tx clock inside MAC will be inversed relative to reference clock + which is from external PHYs in RMII case, and it rarely happen. +- mediatek,rxc-inverse: boolean property, if present indicates that + 1. rx clock will be inversed in MII/RGMII case. + 2. reference clock will be inversed when arrived at MAC in RMII case. +- assigned-clocks: mac_main and ptp_ref clocks +- assigned-clock-parents: parent clocks of the assigned clocks + +Example: + eth: ethernet@1101c000 { + compatible = "mediatek,mt2712-gmac"; + reg = <0 0x1101c000 0 0x1300>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq"; + phy-mode ="rgmii"; + mac-address = [00 55 7b b5 7d f7]; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref", + "ptp_top"; + clocks = <&pericfg CLK_PERI_GMAC>, + <&pericfg CLK_PERI_GMAC_PCLK>, + <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, + <&topckgen CLK_TOP_APLL1_D3>; + mediatek,pericfg = <&pericfg>; + mediatek,tx-delay-ps = <1530>; + mediatek,rx-delay-ps = <1530>; + mediatek,rmii-rxc; + mediatek,txc-inverse; + mediatek,rxc-inverse; + snps,txpbl = <32>; + snps,rxpbl = <32>; + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 3530256a879c..7ad36213093e 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -18,6 +18,7 @@ Required properties: R-Car Gen2 and RZ/G1 devices. - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC. + - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC. - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. - "renesas,etheravb-r8a77965" for the R8A77965 SoC. diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 2196d1ab3c8c..ae661e65354e 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -21,10 +21,22 @@ can be provided per device. SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". -Optional properties: - reg: Address and length of the register set for the device. - reg-names: Must include the list of following reg names, "membase" +- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" + compatible target. + reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" + compatible target. + Must contain interrupt-names property per entry for + "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. + +- interrupt-names: Must include the entries for MSI interrupt + names ("msi0" to "msi15") and legacy interrupt + name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" + compatible targets. + +Optional properties: - resets: Must contain an entry for each entry in reset-names. See ../reset/reseti.txt for details. - reset-names: Must include the list of following reset names, @@ -37,12 +49,9 @@ Optional properties: - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names. - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc". -- interrupts: List of interrupt lines. Must contain an entry - for each entry in the interrupt-names property. -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy"), + "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and + "cxo_ref_clk_pin" for "qcom,wcn3990-wifi" + compatible target. - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. @@ -55,14 +64,25 @@ Optional properties: - qcom,ath10k-pre-calibration-data : pre calibration data as an array, the length can vary between hw versions. - <supply-name>-supply: handle to the regulator device tree node - optional "supply-name" is "vdd-0.8-cx-mx". + optional "supply-name" are "vdd-0.8-cx-mx", + "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0". - memory-region: Usage: optional Value type: <phandle> Definition: reference to the reserved-memory for the msa region used by the wifi firmware running in Q6. +- iommus: + Usage: optional + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. +- ext-fem-name: + Usage: Optional + Value type: string + Definition: Name of external front end module used. Some valid FEM names + for example: "microsemi-lx5586", "sky85703-11" + and "sky85803" etc. -Example (to supply the calibration data alone): +Example (to supply PCI based wifi block details): In this example, the node is defined as child node of the PCI controller. @@ -74,10 +94,10 @@ pci { #address-cells = <3>; device_type = "pci"; - ath10k@0,0 { + wifi@0,0 { reg = <0 0 0 0 0>; - device_type = "pci"; qcom,ath10k-calibration-data = [ 01 02 03 ... ]; + ext-fem-name = "microsemi-lx5586"; }; }; }; @@ -138,21 +158,25 @@ wifi@18000000 { compatible = "qcom,wcn3990-wifi"; reg = <0x18800000 0x800000>; reg-names = "membase"; - clocks = <&clock_gcc clk_aggre2_noc_clk>; - clock-names = "smmu_aggre2_noc_clk" + clocks = <&clock_gcc clk_rf_clk2_pin>; + clock-names = "cxo_ref_clk_pin"; interrupts = - <0 130 0 /* CE0 */ >, - <0 131 0 /* CE1 */ >, - <0 132 0 /* CE2 */ >, - <0 133 0 /* CE3 */ >, - <0 134 0 /* CE4 */ >, - <0 135 0 /* CE5 */ >, - <0 136 0 /* CE6 */ >, - <0 137 0 /* CE7 */ >, - <0 138 0 /* CE8 */ >, - <0 139 0 /* CE9 */ >, - <0 140 0 /* CE10 */ >, - <0 141 0 /* CE11 */ >; + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; vdd-0.8-cx-mx-supply = <&pm8998_l5>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; memory-region = <&wifi_msa_mem>; + iommus = <&apps_smmu 0x0040 0x1>; }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index e3298e18de26..2e0723ab3384 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -2,6 +2,8 @@ Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" +- clocks: phandle to the efuse peripheral clock provided by the + clock controller. = Data cells = Are child nodes of eFuse, bindings of which as described in @@ -11,6 +13,7 @@ Example: efuse: efuse { compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt index 3f1d3fca62bb..614b594f4e72 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt @@ -56,7 +56,7 @@ For CAM, this 24-bit offset is: cfg_offset(bus, device, function, register) = bus << 16 | device << 11 | function << 8 | register -Whilst ECAM extends this by 4 bits to accommodate 4k of function space: +While ECAM extends this by 4 bits to accommodate 4k of function space: cfg_offset(bus, device, function, register) = bus << 20 | device << 15 | function << 12 | register diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 66df1e81e0b8..9b2b8d66d1f4 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -13,11 +13,12 @@ information. Required properties: - compatible: should contain the platform identifier such as: - "fsl,ls1021a-pcie", "snps,dw-pcie" - "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" + "fsl,ls1021a-pcie" + "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" + "fsl,ls1043a-pcie" "fsl,ls1012a-pcie" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an @@ -35,7 +36,7 @@ Required properties: Example: pcie@3400000 { - compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1021a-pcie"; reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; diff --git a/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt new file mode 100644 index 000000000000..1bd15785b4ae --- /dev/null +++ b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt @@ -0,0 +1,17 @@ +* NDS32 Performance Monitor Units + +NDS32 core have a PMU for counting cpu and cache events like cache misses. +The NDS32 PMU representation in the device tree should be done as under: + +Required properties: + +- compatible : + "andestech,nds32v3-pmu" + +- interrupts : The interrupt number for NDS32 PMU is 13. + +Example: +pmu{ + compatible = "andestech,nds32v3-pmu"; + interrupts = <13>; +} diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt new file mode 100644 index 000000000000..a22e853d710c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -0,0 +1,17 @@ +* Freescale i.MX8MQ USB3 PHY binding + +Required properties: +- compatible: Should be "fsl,imx8mq-usb-phy" +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) +- reg: The base address and length of the registers +- clocks: phandles to the clocks for each clock listed in clock-names +- clock-names: must contain "phy" + +Example: + usb3_phy0: phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt new file mode 100644 index 000000000000..6e1b47bfce43 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt @@ -0,0 +1,67 @@ +Cadence Sierra PHY +----------------------- + +Required properties: +- compatible: cdns,sierra-phy-t0 +- clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must be "phy_clk" +- resets: Must contain an entry for each in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include "sierra_reset" and "sierra_apb". + "sierra_reset" must control the reset line to the PHY. + "sierra_apb" must control the reset line to the APB PHY + interface. +- reg: register range for the PHY. +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Optional properties: +- cdns,autoconf: A boolean property whose presence indicates that the + PHY registers will be configured by hardware. If not + present, all sub-node optional properties must be + provided. + +Sub-nodes: + Each group of PHY lanes with a single master lane should be represented as + a sub-node. Note that the actual configuration of each lane is determined by + hardware strapping, and must match the configuration specified here. + +Sub-node required properties: +- #phy-cells: Generic PHY binding; must be 0. +- reg: The master lane number. This is the lowest numbered lane + in the lane group. +- resets: Must contain one entry which controls the reset line for the + master lane of the sub-node. + See ../reset/reset.txt for details. + +Sub-node optional properties: +- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The + group is made up of consecutive lanes. +- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on + configuration of lanes. + +Example: + pcie_phy4: pcie-phy@fd240000 { + compatible = "cdns,sierra-phy-t0"; + reg = <0x0 0xfd240000 0x0 0x40000>; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "sierra_reset", "sierra_apb"; + clocks = <&phyclock>; + clock-names = "phy_clk"; + #address-cells = <1>; + #size-cells = <0>; + pcie0_phy0: pcie-phy@0 { + reg = <0>; + resets = <&phyrst 2>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + pcie0_phy1: pcie-phy@2 { + reg = <2>; + resets = <&phyrst 4>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index adf20b2bdf71..41a1074228ba 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -25,10 +25,6 @@ Required properties: - For all others: - The reg-names property shouldn't be defined. - - #clock-cells: must be 1 - - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe - interface (for pipe based PHYs). These clock are then gate-controlled - by gcc. - #address-cells: must be 1 - #size-cells: must be 1 - ranges: must be present @@ -40,24 +36,36 @@ Required properties: "ref" for 19.2 MHz ref clk, "com_aux" for phy common block aux clock, "ref_aux" for phy reference aux clock, + + For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". - For "qcom,qmp-v3-usb3-phy" must contain: + For "qcom,sdm845-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-ufs-phy" must contain: + "ref", "ref_aux". - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - reset-names: "phy" for reset of phy block, "common" for phy common block reset, - "cfg" for phy's ahb cfg block reset (Optional). + "cfg" for phy's ahb cfg block reset. + + For "qcom,ipq8074-qmp-pcie-phy" must contain: + "phy", "common". For "qcom,msm8996-qmp-pcie-phy" must contain: - "phy", "common", "cfg". + "phy", "common", "cfg". For "qcom,msm8996-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,ipq8074-qmp-pcie-phy" must contain: - "phy", "common". + "phy", "common". + For "qcom,sdm845-qmp-usb3-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-ufs-phy": no resets are listed. - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. @@ -70,37 +78,45 @@ Required nodes: - Each device node of QMP phy is required to have as many child nodes as the number of lanes the PHY has. -Required properties for child node: +Required properties for child nodes of PCIe PHYs (one child per lane): - reg: list of offset and length pairs of register sets for PHY blocks - - - index 0: tx - - index 1: rx - - index 2: pcs - - index 3: pcs_misc (optional) + tx, rx, pcs, and pcs_misc (optional). + - #phy-cells: must be 0 +Required properties for a single "lanes" child node of non-PCIe PHYs: + - reg: list of offset and length pairs of register sets for PHY blocks + For 1-lane devices: + tx, rx, pcs, and (optionally) pcs_misc + For 2-lane devices: + tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc - #phy-cells: must be 0 +Required properties for child node of PCIe and USB3 qmp phys: - clocks: a list of phandles and clock-specifier pairs, one for each entry in clock-names. - - clock-names: Must contain following for pcie and usb qmp phys: + - clock-names: Must contain following: "pipe<lane-number>" for pipe clock specific to each lane. - clock-output-names: Name of the PHY clock that will be the parent for the above pipe clock. - For "qcom,ipq8074-qmp-pcie-phy": - "pcie20_phy0_pipe_clk" Pipe Clock parent (or) "pcie20_phy1_pipe_clk" + - #clock-cells: must be 0 + - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then + gate-controlled by the gcc. +Required properties for child node of PHYs with lane reset, AKA: + "qcom,msm8996-qmp-pcie-phy" - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - - reset-names: Must contain following for pcie qmp phys: + - reset-names: Must contain following: "lane<lane-number>" for reset specific to each lane. Example: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x34000 0x488>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -122,6 +138,7 @@ Example: reg = <0x35000 0x130>, <0x35200 0x200>, <0x35400 0x1dc>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; @@ -135,3 +152,54 @@ Example: ... ... }; + + phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x88eb000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + lane@88eb200 { + reg = <0x88eb200 0x128>, + <0x88eb400 0x1fc>, + <0x88eb800 0x218>, + <0x88eb600 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + phy@1d87000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0x1d87000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + lanes@1d87400 { + reg = <0x1d87400 0x108>, + <0x1d87600 0x1e0>, + <0x1d87c00 0x1dc>, + <0x1d87800 0x108>, + <0x1d87a00 0x1e0>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 07ca4ec4a745..f2e120af17f0 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -14,13 +14,14 @@ Required properties: * allwinner,sun8i-r40-usb-phy * allwinner,sun8i-v3s-usb-phy * allwinner,sun50i-a64-usb-phy + * allwinner,sun50i-h6-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" - * "pmu0" for H3, V3s and A64 + * "pmu0" for H3, V3s, A64 or H6 * "pmu1" * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "pmu3" for sun8i-h3 + * "pmu3" for sun8i-h3 or sun50i-h6 - #phy-cells : from the generic phy bindings, must be 1 - clocks : phandle + clock specifier for the phy clocks - clock-names : @@ -29,12 +30,13 @@ Required properties: * "usb0_phy", "usb1_phy" for sun8i * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3 + * "usb0_phy" and "usb3_phy" for sun50i-h6 - resets : a list of phandle + reset specifier pairs - reset-names : * "usb0_reset" * "usb1_reset" * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "usb3_reset" for sun8i-h3 + * "usb3_reset" for sun8i-h3 and sun50i-h6 Optional properties: - usb0_id_det-gpios : gpio phandle for reading the otg id pin value diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt new file mode 100644 index 000000000000..50ce9ae0f7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt @@ -0,0 +1,68 @@ +CPSW Port's Interface Mode Selection PHY Tree Bindings +----------------------------------------------- + +TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports +two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. +The interface mode is selected by configuring the MII mode selection register(s) +(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and +bit fields placement in SCM are different between SoCs while fields meaning +is the same. + +--------------+ + +-------------------------------+ |SCM | + | CPSW | | +---------+ | + | +--------------------------------+gmii_sel | | + | | | | +---------+ | + | +----v---+ +--------+ | +--------------+ + | |Port 1..<--+-->GMII/MII<-------> + | | | | | | | + | +--------+ | +--------+ | + | | | + | | +--------+ | + | | | RMII <-------> + | +--> | | + | | +--------+ | + | | | + | | +--------+ | + | | | RGMII <-------> + | +--> | | + | +--------+ | + +-------------------------------+ + +CPSW Port's Interface Mode Selection PHY describes MII interface mode between +CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration. + +CPSW Port's Interface Mode Selection PHY device should defined as child device +of SCM node (scm_conf) and can be attached to each CPSW port node using standard +PHY bindings (See phy/phy-bindings.txt). + +Required properties: +- compatible : Should be "ti,am3352-phy-gmii-sel" for am335x platform + "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform + "ti,am43xx-phy-gmii-sel" for am43xx platform + "ti,dm814-phy-gmii-sel" for dm814x platform +- reg : Address and length of the register set for the device +- #phy-cells : must be 2. + cell 1 - CPSW port number (starting from 1) + cell 2 - RMII refclk mode + +Examples: + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + + mac: ethernet@4a100000 { + compatible = "ti,am335x-cpsw","ti,cpsw"; + ... + + cpsw_emac0: slave@4a100200 { + ... + phys = <&phy_gmii_sel 1 1>; + }; + + cpsw_emac1: slave@4a100300 { + ... + phys = <&phy_gmii_sel 2 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt new file mode 100644 index 000000000000..d13ff82f8518 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt @@ -0,0 +1,170 @@ +Actions Semi S700 Pin Controller + +This binding describes the pin controller found in the S700 SoC. + +Required Properties: + +- compatible: Should be "actions,s700-pinctrl" +- reg: Should contain the register base address and size of + the pin controller. +- clocks: phandle of the clock feeding the pin controller +- gpio-controller: Marks the device node as a GPIO controller. +- gpio-ranges: Specifies the mapping between gpio controller and + pin-controller pins. +- #gpio-cells: Should be two. The first cell is the gpio pin number + and the second cell is used for optional parameters. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt. Shall be set to 2. The first cell + defines the interrupt number, the second encodes + the trigger flags described in + bindings/interrupt-controller/interrupts.txt +- interrupts: The interrupt outputs from the controller. There is one GPIO + interrupt per GPIO bank. The number of interrupts listed depends + on the number of GPIO banks on the SoC. The interrupts must be + ordered by bank, starting with bank 0. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +Pinmux functions are available only for the pin groups while pinconf +parameters are available for both pin groups and individual pins. + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +Required Properties: + +- pins: An array of strings, each string containing the name of a pin. + These pins are used for selecting the pull control and schmitt + trigger parameters. The following are the list of pins + available: + + eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer, + eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk, + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2, + ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, + lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap, + lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, + lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, + lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, + dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, + sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, + sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx, + uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, + uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk, + i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1, + csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3, + sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2, + dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb, + dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0, + dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2, + dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3 + +- groups: An array of strings, each string containing the name of a pin + group. These pin groups are used for selecting the pinmux + functions. + rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp, + rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp, + rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp, + i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp, + i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, + ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, + dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, + lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp, + dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp, + uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, + sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp, + i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp, + pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp, + nand_ceb2_mfp, nand_ceb3_mfp + + These pin groups are used for selecting the drive strength + parameters. + + sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv, + rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv, + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv, + pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv, + dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv, + uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv, + sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv + +- function: An array of strings, each string containing the name of the + pinmux functions. These functions can only be selected by + the corresponding pin groups. The following are the list of + pinmux functions available: + + nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1, + uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, + pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0, + sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30, + clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0 + +Optional Properties: + +- bias-pull-down: No arguments. The specified pins should be configured as + pull down. +- bias-pull-up: No arguments. The specified pins should be configured as + pull up. +- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified + pins +- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified + pins +- drive-strength: Integer. Selects the drive strength for the specified + pins in mA. + Valid values are: + <2> + <4> + <8> + <12> + +Example: + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s700-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 136>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + uart3-default: uart3-default { + pinmux { + groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp"; + function = "uart3"; + }; + pinconf { + groups = "uart3_all_drv"; + drive-strength = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 258a4648ab81..cf96b7c20e4d 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -29,6 +29,7 @@ Required properties: "allwinner,sun50i-h5-pinctrl" "allwinner,sun50i-h6-pinctrl" "allwinner,sun50i-h6-r-pinctrl" + "allwinner,suniv-f1c100s-pinctrl" "nextthing,gr8-pinctrl" - reg: Should contain the register physical address and length for the @@ -43,6 +44,19 @@ Note: For backward compatibility reasons, the hosc and losc clocks are only required if you need to use the optional input-debounce property. Any new device tree should set them. +Each pin bank, depending on the SoC, can have an associated regulator: + +- vcc-pa-supply: for the A10, A20, A31, A31s, A80 and R40 SoCs +- vcc-pb-supply: for the A31, A31s, A80 and V3s SoCs +- vcc-pc-supply: for the A10, A20, A31, A31s, A64, A80, H5, R40 and V3s SoCs +- vcc-pd-supply: for the A23, A31, A31s, A64, A80, A83t, H3, H5 and R40 SoCs +- vcc-pe-supply: for the A10, A20, A31, A31s, A64, A80, R40 and V3s SoCs +- vcc-pf-supply: for the A10, A20, A31, A31s, A80, R40 and V3s SoCs +- vcc-pg-supply: for the A10, A20, A31, A31s, A64, A80, H3, H5, R40 and V3s SoCs +- vcc-ph-supply: for the A31, A31s and A80 SoCs +- vcc-pl-supply: for the r-pinctrl of the A64, A80 and A83t SoCs +- vcc-pm-supply: for the r-pinctrl of the A31, A31s and A80 SoCs + Optional properties: - input-debounce: Array of debouncing periods in microseconds. One period per irq bank found in the controller. 0 if no setup required. diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt index 4fa9539070cb..8ab2d468dbdb 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt @@ -7,13 +7,15 @@ configure controller correctly. A list of pins varies across chipsets so few bindings are available. +Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon" +noce. + Required properties: - compatible: must be one of: "brcm,bcm4708-pinmux" "brcm,bcm4709-pinmux" "brcm,bcm53012-pinmux" -- reg: iomem address range of CRU (Central Resource Unit) pin registers -- reg-names: "cru_gpio_control" - the only needed & supported reg right now +- offset: offset of pin registers in the CRU block Functions and their groups available for all chipsets: - "spi": "spi_grp" @@ -37,16 +39,12 @@ Example: #size-cells = <1>; cru@100 { - compatible = "simple-bus"; + compatible = "syscon", "simple-mfd"; reg = <0x100 0x1a4>; - ranges; - #address-cells = <1>; - #size-cells = <1>; - pin-controller@1c0 { + pinctrl { compatible = "brcm,bcm4708-pinmux"; - reg = <0x1c0 0x24>; - reg-names = "cru_gpio_control"; + offset = <0xc0>; spi-pins { function = "spi"; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt index 44ad670ae11e..bfa3703a7446 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt @@ -7,55 +7,47 @@ Note: This binding doc is only for the IOMUXC1 support in A7 Domain and it only supports generic pin config. -Please also refer pinctrl-bindings.txt in this directory for generic pinctrl -binding. - -=== Pin Controller Node === +Please refer to fsl,imx-pinctrl.txt in this directory for common binding +part and usage. Required properties: -- compatible: "fsl,imx7ulp-iomuxc1" -- reg: Should contain the base physical address and size of the iomuxc - registers. - -=== Pin Configuration Node === -- pinmux: One integers array, represents a group of pins mux setting. - The format is pinmux = <PIN_FUNC_ID>, PIN_FUNC_ID is a pin working on - a specific function. - - NOTE: i.MX7ULP PIN_FUNC_ID consists of 4 integers as it shares one mux - and config register as follows: - <mux_conf_reg input_reg mux_mode input_val> - - Refer to imx7ulp-pinfunc.h in in device tree source folder for all - available imx7ulp PIN_FUNC_ID. - -Optional Properties: -- drive-strength Integer. Controls Drive Strength - 0: Standard - 1: Hi Driver -- drive-push-pull Bool. Enable Pin Push-pull -- drive-open-drain Bool. Enable Pin Open-drian -- slew-rate: Integer. Controls Slew Rate - 0: Standard - 1: Slow -- bias-disable: Bool. Pull disabled -- bias-pull-down: Bool. Pull down on pin -- bias-pull-up: Bool. Pull up on pin +- compatible: "fsl,imx7ulp-iomuxc1". +- fsl,pins: Each entry consists of 5 integers which represents the mux + and config setting for one pin. The first 4 integers + <mux_conf_reg input_reg mux_mode input_val> are specified + using a PIN_FUNC_ID macro, which can be found in + imx7ulp-pinfunc.h in the device tree source folder. + The last integer CONFIG is the pad setting value like + pull-up on this pin. + + Please refer to i.MX7ULP Reference Manual for detailed + CONFIG settings. + +CONFIG bits definition: +PAD_CTL_OBE (1 << 17) +PAD_CTL_IBE (1 << 16) +PAD_CTL_LK (1 << 16) +PAD_CTL_DSE_HI (1 << 6) +PAD_CTL_DSE_STD (0 << 6) +PAD_CTL_ODE (1 << 5) +PAD_CTL_PUSH_PULL (0 << 5) +PAD_CTL_SRE_SLOW (1 << 2) +PAD_CTL_SRE_STD (0 << 2) +PAD_CTL_PE (1 << 0) Examples: #include "imx7ulp-pinfunc.h" /* Pin Controller Node */ -iomuxc1: iomuxc@40ac0000 { +iomuxc1: pinctrl@40ac0000 { compatible = "fsl,imx7ulp-iomuxc1"; reg = <0x40ac0000 0x1000>; /* Pin Configuration Node */ pinctrl_lpuart4: lpuart4grp { - pinmux = < - IMX7ULP_PAD_PTC3__LPUART4_RX - IMX7ULP_PAD_PTC2__LPUART4_TX + fsl,pins = < + IMX7ULP_PAD_PTC3__LPUART4_RX 0x1 + IMX7ULP_PAD_PTC2__LPUART4_TX 0x1 >; - bias-pull-up; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt index 24a210e0c59a..32a8a8fa7805 100644 --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt @@ -2,7 +2,8 @@ Microsemi Ocelot pin controller Device Tree Bindings ---------------------------------------------------- Required properties: - - compatible : Should be "mscc,ocelot-pinctrl" + - compatible : Should be "mscc,ocelot-pinctrl" or + "mscc,jaguar2-pinctrl" - reg : Address and length of the register set for the device - gpio-controller : Indicates this device is a GPIO controller - #gpio-cells : Must be 2. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt new file mode 100644 index 000000000000..bd83401e6179 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt @@ -0,0 +1,83 @@ +* MediaTek MT6797 Pin Controller + +The MediaTek's MT6797 Pin controller is used to control SoC pins. + +Required properties: +- compatible: Value should be one of the following. + "mediatek,mt6797-pinctrl", compatible with mt6797 pinctrl. +- reg: Should contain address and size for gpio, iocfgl, iocfgb, + iocfgr and iocfgt register bases. +- reg-names: An array of strings describing the "reg" entries. Must + contain "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt". +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Should be two. The first cell is the gpio pin number + and the second cell is used for optional parameters. + +Optional properties: +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- interrupts : The interrupt outputs from the controller. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices. + +Subnode format +A pinctrl node should contain at least one subnodes representing the +pinctrl groups available on the machine. Each subnode will list the +pins it needs, and how they should be configured, with regard to muxer +configuration, pullups, drive strength, input enable/disable and input schmitt. + + node { + pinmux = <PIN_NUMBER_PINMUX>; + GENERIC_PINCONFIG; + }; + +Required properties: +- pinmux: Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + +Optional properties: +- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable, + bias-pull, bias-pull-down, input-enable, input-schmitt-enable, + input-schmitt-disable, output-enable output-low, output-high, + drive-strength, and slew-rate are valid. + + Valid arguments for 'slew-rate' are '0' for no slew rate controlled and + '1' for slower slew rate respectively. Valid arguments for 'drive-strength' + is limited, such as 2, 4, 8, 12, or 16 in mA. + + Some optional vendor properties as defined are valid to specify in a + pinconf subnode: + - mediatek,tdsel: An integer describing the steps for output level shifter + duty cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + - mediatek,rdsel: An integer describing the steps for input level shifter + duty cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 63. + - mediatek,pull-up-adv: An integer describing the code R1R0 as 0, 1, 2 + or 3 for the advanced pull-up resistors. + - mediatek,pull-down-adv: An integer describing the code R1R0 as 0, 1, 2, + or 3 for the advanced pull-down resistors. + +Examples: + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6797-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x10002000 0 0x400>, + <0 0x10002400 0 0x400>, + <0 0x10002800 0 0x400>, + <0 0x10002C00 0 0x400>; + reg-names = "gpio", "iocfgl", "iocfgb", + "iocfgr", "iocfgt"; + gpio-controller; + #gpio-cells = <2>; + + uart1_pins_a: uart1 { + pins1 { + pinmux = <MT6797_GPIO232__FUNC_URXD1>, + <MT6797_GPIO233__FUNC_UTXD1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt index 3b695131c51b..7a7aca1ed705 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt @@ -3,6 +3,7 @@ Required properties for the root node: - compatible: Should be one of the following "mediatek,mt7622-pinctrl" for MT7622 SoC + "mediatek,mt7629-pinctrl" for MT7629 SoC - reg: offset and length of the pinctrl space - gpio-controller: Marks the device node as a GPIO controller. @@ -324,6 +325,136 @@ group. "uart4_2_rts_cts" "uart" 95, 96 "watchdog" "watchdog" 78 + +== Valid values for pins, function and groups on MT7629 == + + Pin #: Valid values for pins + ----------------------------- + PIN 0: "TOP_5G_CLK" + PIN 1: "TOP_5G_DATA" + PIN 2: "WF0_5G_HB0" + PIN 3: "WF0_5G_HB1" + PIN 4: "WF0_5G_HB2" + PIN 5: "WF0_5G_HB3" + PIN 6: "WF0_5G_HB4" + PIN 7: "WF0_5G_HB5" + PIN 8: "WF0_5G_HB6" + PIN 9: "XO_REQ" + PIN 10: "TOP_RST_N" + PIN 11: "SYS_WATCHDOG" + PIN 12: "EPHY_LED0_N_JTDO" + PIN 13: "EPHY_LED1_N_JTDI" + PIN 14: "EPHY_LED2_N_JTMS" + PIN 15: "EPHY_LED3_N_JTCLK" + PIN 16: "EPHY_LED4_N_JTRST_N" + PIN 17: "WF2G_LED_N" + PIN 18: "WF5G_LED_N" + PIN 19: "I2C_SDA" + PIN 20: "I2C_SCL" + PIN 21: "GPIO_9" + PIN 22: "GPIO_10" + PIN 23: "GPIO_11" + PIN 24: "GPIO_12" + PIN 25: "UART1_TXD" + PIN 26: "UART1_RXD" + PIN 27: "UART1_CTS" + PIN 28: "UART1_RTS" + PIN 29: "UART2_TXD" + PIN 30: "UART2_RXD" + PIN 31: "UART2_CTS" + PIN 32: "UART2_RTS" + PIN 33: "MDI_TP_P1" + PIN 34: "MDI_TN_P1" + PIN 35: "MDI_RP_P1" + PIN 36: "MDI_RN_P1" + PIN 37: "MDI_RP_P2" + PIN 38: "MDI_RN_P2" + PIN 39: "MDI_TP_P2" + PIN 40: "MDI_TN_P2" + PIN 41: "MDI_TP_P3" + PIN 42: "MDI_TN_P3" + PIN 43: "MDI_RP_P3" + PIN 44: "MDI_RN_P3" + PIN 45: "MDI_RP_P4" + PIN 46: "MDI_RN_P4" + PIN 47: "MDI_TP_P4" + PIN 48: "MDI_TN_P4" + PIN 49: "SMI_MDC" + PIN 50: "SMI_MDIO" + PIN 51: "PCIE_PERESET_N" + PIN 52: "PWM_0" + PIN 53: "GPIO_0" + PIN 54: "GPIO_1" + PIN 55: "GPIO_2" + PIN 56: "GPIO_3" + PIN 57: "GPIO_4" + PIN 58: "GPIO_5" + PIN 59: "GPIO_6" + PIN 60: "GPIO_7" + PIN 61: "GPIO_8" + PIN 62: "SPI_CLK" + PIN 63: "SPI_CS" + PIN 64: "SPI_MOSI" + PIN 65: "SPI_MISO" + PIN 66: "SPI_WP" + PIN 67: "SPI_HOLD" + PIN 68: "UART0_TXD" + PIN 69: "UART0_RXD" + PIN 70: "TOP_2G_CLK" + PIN 71: "TOP_2G_DATA" + PIN 72: "WF0_2G_HB0" + PIN 73: "WF0_2G_HB1" + PIN 74: "WF0_2G_HB2" + PIN 75: "WF0_2G_HB3" + PIN 76: "WF0_2G_HB4" + PIN 77: "WF0_2G_HB5" + PIN 78: "WF0_2G_HB6" + +Valid values for function are: + "eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart", + "watchdog", "wifi" + +Valid values for groups are: + Valid value function pins (in pin#) + ---------------------------------------------------------------- + "mdc_mdio" "eth" 23, 24 + "i2c_0" "i2c" 19, 20 + "i2c_1" "i2c" 53, 54 + "ephy_leds" "led" 12, 13, 14, 15, 16, + 17, 18 + "ephy0_led" "led" 12 + "ephy1_led" "led" 13 + "ephy2_led" "led" 14 + "ephy3_led" "led" 15 + "ephy4_led" "led" 16 + "wf2g_led" "led" 17 + "wf5g_led" "led" 18 + "snfi" "flash" 62, 63, 64, 65, 66, 67 + "spi_nor" "flash" 62, 63, 64, 65, 66, 67 + "pcie_pereset" "pcie" 51 + "pcie_wake" "pcie" 55 + "pcie_clkreq" "pcie" 56 + "pwm_0" "pwm" 52 + "pwm_1" "pwm" 61 + "spi_0" "spi" 21, 22, 23, 24 + "spi_1" "spi" 62, 63, 64, 65 + "spi_wp" "spi" 66 + "spi_hold" "spi" 67 + "uart0_txd_rxd" "uart" 68, 69 + "uart1_0_txd_rxd" "uart" 25, 26 + "uart1_0_cts_rts" "uart" 27, 28 + "uart1_1_txd_rxd" "uart" 53, 54 + "uart1_1_cts_rts" "uart" 55, 56 + "uart2_0_txd_rxd" "uart" 29, 30 + "uart2_0_cts_rts" "uart" 31, 32 + "uart2_1_txd_rxd" "uart" 57, 58 + "uart2_1_cts_rts" "uart" 59, 60 + "watchdog" "watchdog" 11 + "wf0_2g" "wifi" 70, 71, 72, 73, 74, + 75, 76, 77, 78 + "wf0_5g" "wifi" 0, 1, 2, 3, 4, 5, 6, + 7, 8, 9, 10 + Example: pio: pinctrl@10211000 { diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index ab4000eab07d..759aa1732e48 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -92,7 +92,7 @@ to specify in a pin configuration subnode: gpio1-gpio26 for pm8998 gpio1-gpio22 for pma8084 gpio1-gpio10 for pmi8994 - gpio1-gpio11 for pms405 + gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10) - function: Usage: required diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt new file mode 100644 index 000000000000..a63ccd476cda --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt @@ -0,0 +1,87 @@ +Renesas RZ/A2 combined Pin and GPIO controller + +The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO controller. +Pin multiplexing and GPIO configuration is performed on a per-pin basis. +Each port features up to 8 pins, each of them configurable for GPIO +function (port mode) or in alternate function mode. +Up to 8 different alternate function modes exist for each single pin. + +Pin controller node +------------------- + +Required properties: + - compatible: shall be: + - "renesas,r7s9210-pinctrl": for RZ/A2M + - reg + Address base and length of the memory area where the pin controller + hardware is mapped to. + - gpio-controller + This pin controller also controls pins as GPIO + - #gpio-cells + Must be 2 + - gpio-ranges + Expresses the total number of GPIO ports/pins in this SoC + +Example: Pin controller node for RZ/A2M SoC (r7s9210) + + pinctrl: pin-controller@fcffe000 { + compatible = "renesas,r7s9210-pinctrl"; + reg = <0xfcffe000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 176>; + }; + +Sub-nodes +--------- + +The child nodes of the pin controller designate pins to be used for +specific peripheral functions or as GPIO. + +- Pin multiplexing sub-nodes: + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, pin + number and the desired function index. Use the RZA2_PINMUX macro located + in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily define these. + For assigning GPIO pins, use the macro RZA2_PIN also in r7s9210-pinctrl.h + to express the desired port pin. + + Required properties: + - pinmux: + integer array representing pin number and pin multiplexing configuration. + When a pin has to be configured in alternate function mode, use this + property to identify the pin by its global index, and provide its + alternate function configuration number along with it. + When multiple pins are required to be configured as part of the same + alternate function they shall be specified as members of the same + argument list of a single "pinmux" property. + Helper macros to ease assembling the pin index from its position + (port where it sits on and pin number) and alternate function identifier + are provided by the pin controller header file at: + <dt-bindings/pinctrl/r7s9210-pinctrl.h> + Integers values in "pinmux" argument list are assembled as: + ((PORT * 8 + PIN) | MUX_FUNC << 16) + + Example: Board specific pins configuration + + &pinctrl { + /* Serial Console */ + scif4_pins: serial4 { + pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ + <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ + }; + }; + + Example: Assigning a GPIO: + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led0 { + /* P6_0 */ + gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index ef4f2ff4a1aa..48df30a36b01 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -56,6 +56,7 @@ Optional properties: More details in Documentation/devicetree/bindings/gpio/gpio.txt. - st,bank-ioport: should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). + - hwlocks: reference to a phandle of a hardware spinlock provider node. Example 1: #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt index 9acce75b29ab..7c947a996df1 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt @@ -6,7 +6,9 @@ Control (PGC) for various power domains. Required properties: -- compatible: Should be "fsl,imx7d-gpc" +- compatible: Should be one of: + - "fsl,imx7d-gpc" + - "fsl,imx8mq-gpc" - reg: should be register base and length as documented in the datasheet @@ -22,7 +24,8 @@ which, in turn, is expected to contain the following: Required properties: - reg: Power domain index. Valid values are defined in - include/dt-bindings/power/imx7-power.h + include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and + include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc - #power-domain-cells: Should be 0 diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt index 6d8980c18c34..3e56c1b34a4c 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt @@ -27,6 +27,8 @@ Optional properties: it to an output when the power-off handler is called. If this optional property is not specified, the GPIO is initialized as an output in its inactive state. +- active-delay-ms: Delay (default 100) to wait after driving gpio active +- inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is specified, 3000 ms is used. diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt index 826e8a879121..7a1fb532abe5 100644 --- a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt +++ b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt @@ -4,6 +4,7 @@ Required Properties: - compatible: One of: "x-powers,axp202-ac-power-supply" "x-powers,axp221-ac-power-supply" + "x-powers,axp813-ac-power-supply" This node is a subnode of the axp20x PMIC. @@ -13,6 +14,8 @@ reading ADC channels from the AXP20X ADC. The AXP22X is only able to tell if an AC power supply is present and usable. +AXP813/AXP803 are able to limit current and supply voltage + Example: &axp209 { diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index f4d3b4a10b43..89871ab8c704 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -22,6 +22,18 @@ Optional Properties: - charge-term-current-microamp: current for charge termination phase - constant-charge-current-max-microamp: maximum constant input current - constant-charge-voltage-max-microvolt: maximum constant input voltage + - factory-internal-resistance-micro-ohms: battery factory internal resistance + - ocv-capacity-table-0: An array providing the open circuit voltage (OCV) + of the battery and corresponding battery capacity percent, which is used + to look up battery capacity according to current OCV value. And the open + circuit voltage unit is microvolt. + - ocv-capacity-table-1: Same as ocv-capacity-table-0 + ...... + - ocv-capacity-table-n: Same as ocv-capacity-table-0 + - ocv-capacity-celsius: An array containing the temperature in degree Celsius, + for each of the battery capacity lookup table. The first temperature value + specifies the OCV table 0, and the second temperature value specifies the + OCV table 1, and so on. Battery properties are named, where possible, for the corresponding elements in enum power_supply_property, defined in @@ -42,6 +54,11 @@ Example: charge-term-current-microamp = <128000>; constant-charge-current-max-microamp = <900000>; constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <250000>; + ocv-capacity-celsius = <(-10) 0 10>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...; + ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...; + ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...; }; charger: charger@11 { diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt index 9e517d307070..ffe2be408bb6 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt @@ -3,7 +3,9 @@ TI BQ24190 Li-Ion Battery Charger Required properties: - compatible: contains one of the following: * "ti,bq24190" + * "ti,bq24192" * "ti,bq24192i" + * "ti,bq24196" - reg: integer, I2C address of the charger. - interrupts[-extended]: configuration for charger INT pin. @@ -19,6 +21,12 @@ Optional properties: - ti,system-minimum-microvolt: when power is connected and the battery is below minimum system voltage, the system will be regulated above this setting. +child nodes: +- usb-otg-vbus: + Usage: optional + Description: Regulator that is used to control the VBUS voltage direction for + either USB host mode or for charging on the OTG port. + Notes: - Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default charge current on USB SDP ports, among other features). To simulate this on @@ -39,6 +47,8 @@ Example: interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>; monitored-battery = <&bat>; ti,system-minimum-microvolt = <3200000>; + + usb_otg_vbus: usb-otg-vbus { }; }; &twl_gpio { diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt new file mode 100644 index 000000000000..fc35ac577401 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt @@ -0,0 +1,56 @@ +Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720-fgu", + "sprd,sc2721-fgu", + "sprd,sc2723-fgu", + "sprd,sc2730-fgu", + "sprd,sc2731-fgu". +- reg: The address offset of fuel gauge unit. +- battery-detect-gpios: GPIO for battery detection. +- io-channels: Specify the IIO ADC channel to get temperature. +- io-channel-names: Should be "bat-temp". +- nvmem-cells: A phandle to the calibration cells provided by eFuse device. +- nvmem-cell-names: Should be "fgu_calib". +- monitored-battery: Phandle of battery characteristics devicetree node. + See Documentation/devicetree/bindings/power/supply/battery.txt + +Example: + + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <1900000>; + constant-charge-voltage-max-microvolt = <4350000>; + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, + <4022000 85>, <3983000 80>, <3949000 75>, + <3917000 70>, <3889000 65>, <3864000 60>, + <3835000 55>, <3805000 50>, <3787000 45>, + <3777000 40>, <3773000 35>, <3770000 30>, + <3765000 25>, <3752000 20>, <3724000 15>, + <3680000 10>, <3605000 5>, <3400000 0>; + ...... + }; + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fgu@a00 { + compatible = "sprd,sc2731-fgu"; + reg = <0xa00>; + battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; + io-channels = <&pmic_adc 5>; + io-channel-names = "bat-temp"; + nvmem-cells = <&fgu_calib>; + nvmem-cell-names = "fgu_calib"; + monitored-battery = <&bat>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index 7f31fe7e2093..fbd6a4f943ce 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -6,6 +6,7 @@ Required Properties: - "renesas,pwm-r8a7744": for RZ/G1N - "renesas,pwm-r8a7745": for RZ/G1E - "renesas,pwm-r8a774a1": for RZ/G2M + - "renesas,pwm-r8a774c0": for RZ/G2E - "renesas,pwm-r8a7778": for R-Car M1A - "renesas,pwm-r8a7779": for R-Car H1 - "renesas,pwm-r8a7790": for R-Car H2 diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt index ac955dea00d1..4017527619ab 100644 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -15,11 +15,17 @@ Optional input supply properties: - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 Any standard regulator properties can be used to configure the single regulator. +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be +specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h +file. The valid names for regulators are: REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. Example: + +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> + pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; @@ -32,6 +38,18 @@ Example: regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt=<1400000>; + regulator-suspend-max-microvolt=<1400000>; + regulator-changeable-in-suspend; + regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; + }; }; vdd_1v2_reg: REG_DCDC2 { @@ -39,6 +57,14 @@ Example: regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_reg: REG_DCDC3 { @@ -53,6 +79,14 @@ Example: regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_lp_reg: REG_LDO2 { diff --git a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt new file mode 100644 index 000000000000..91974e6ee251 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt @@ -0,0 +1,82 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the regulator portion +of the driver. + +Also see these documents for generic binding information: + [1] Regulator: ../regulator/regulator.txt + +This binding must be part of the Lochnagar MFD binding: + [2] ../mfd/cirrus,lochnagar.txt + +Optional sub-nodes: + + - VDDCORE : Initialisation data for the VDDCORE regulator, which + supplies the CODECs digital core if it has no build regulator for that + purpose. + Required Properties: + - compatible : One of the following strings: + "cirrus,lochnagar2-vddcore" + - SYSVDD-supply: Primary power supply for the Lochnagar. + + - MICVDD : Initialisation data for the MICVDD regulator, which + supplies the CODECs MICVDD. + Required Properties: + - compatible : One of the following strings: + "cirrus,lochnagar2-micvdd" + - SYSVDD-supply: Primary power supply for the Lochnagar. + + - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies. + Required Properties: + - compatible : One of the following strings: + "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd" + Optional Properties: + - cirrus,micbias-input : A property selecting which of the CODEC + minicard micbias outputs should be used, valid values are 1 - 4. + - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the + MICxVDD outputs, supplying the digital microphones, normally + supplied from the attached CODEC. + + - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the + CODECs analog and 1.8V digital supplies. + Required Properties: + - compatible : Should be set to "regulator-fixed" + - regulator-min-microvolt : Should be set to 1.8V + - regulator-max-microvolt : Should be set to 1.8V + - regulator-boot-on + - regulator-always-on + - vin-supply : Should be set to same supply as SYSVDD + +Example: + +lochnagar { + lochnagar-micvdd: MICVDD { + compatible = "cirrus,lochnagar2-micvdd"; + + SYSVDD-supply = <&wallvdd>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lochnagar-vdd1v8: VDD1V8 { + compatible = "regulator-fixed"; + + regulator-name = "VDD1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + + vin-supply = <&wallvdd>; + }; +}; + diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt new file mode 100644 index 000000000000..b8f843fa6092 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -0,0 +1,143 @@ +MCP16502 PMIC + +Required properties: +- compatible: "microchip,mcp16502" +- reg: I2C slave address +- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode. +- regulators: A node that houses a sub-node for each regulator within + the device. Each sub-node is identified using the node's + name. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Regualtors of MCP16502 PMIC: +1) VDD_IO - Buck (1.2 - 3.7 V) +2) VDD_DDR - Buck (0.6 - 1.85 V) +3) VDD_CORE - Buck (0.6 - 1.85 V) +4) VDD_OTHER - BUCK (0.6 - 1.85 V) +5) LDO1 - LDO (1.2 - 3.7 V) +6) LDO2 - LDO (1.2 - 3.7 V) + +Regulator modes: +2 - FPWM: higher precision, higher consumption +4 - AutoPFM: lower precision, lower consumption + +Each regulator is defined using the standard binding for regulators. + +Example: + +mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index a7cd36877bfe..0a3f087d5844 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -33,13 +33,16 @@ Optional properties: decreases of any level. This is useful for regulators with exponential voltage changes. - regulator-soft-start: Enable soft start so that voltage ramps slowly +- regulator-state-standby sub-root node for Standby mode + : equivalent with standby Linux sleep state, which provides energy savings + with a relatively quick transition back time. - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, only some external interrupt can wake the device. - regulator-state-disk sub-root node for Suspend-to-DISK mode : suspend to disk, this state operates similarly to Suspend-to-RAM, but includes a final step of writing memory contents to disk. -- regulator-state-[mem/disk] node has following common properties: +- regulator-state-[mem/disk/standby] node has following common properties: - regulator-on-in-suspend: regulator should be on in suspend state. - regulator-off-in-suspend: regulator should be off in suspend state. - regulator-suspend-min-microvolt: minimum voltage may be set in @@ -76,8 +79,11 @@ Optional properties: - regulator-coupled-with: Regulators with which the regulator is coupled. The linkage is 2-way - all coupled regulators should be linked with each other. A regulator should not be coupled with its supplier. -- regulator-coupled-max-spread: Max spread between voltages of coupled regulators - in microvolts. +- regulator-coupled-max-spread: Array of maximum spread between voltages of + coupled regulators in microvolts, each value in the array relates to the + corresponding couple specified by the regulator-coupled-with property. +- regulator-max-step-microvolt: Maximum difference between current and target + voltages that can be changed safely in a single step. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple diff --git a/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt b/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt new file mode 100644 index 000000000000..d483a2103d70 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt @@ -0,0 +1,24 @@ +* Xen hypervisor reserved-memory binding + +Expose one or more memory regions as reserved-memory to the guest +virtual machine. Typically, a region is configured at VM creation time +to be a shared memory area across multiple virtual machines for +communication among them. + +For each of these pre-shared memory regions, a range is exposed under +the /reserved-memory node as a child node. Each range sub-node is named +xen-shmem@<address> and has the following properties: + +- compatible: + compatible = "xen,shared-memory-v1" + +- reg: + the base guest physical address and size of the shared memory region + +- xen,offset: (borrower VMs only) + 64 bit integer offset within the owner virtual machine's shared + memory region used for the mapping in the borrower VM. + +- xen,id: + a string that identifies the shared memory region as specified in + the VM config file diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt index 366b99bff8cd..2bc89f133701 100644 --- a/Documentation/devicetree/bindings/rng/mtk-rng.txt +++ b/Documentation/devicetree/bindings/rng/mtk-rng.txt @@ -1,9 +1,10 @@ Device-Tree bindings for Mediatek random number generator -found in Mediatek SoC family +found in MediaTek SoC family Required properties: - compatible : Should be "mediatek,mt7622-rng", "mediatek,mt7623-rng" : for MT7622 + "mediatek,mt7629-rng", "mediatek,mt7623-rng" : for MT7629 "mediatek,mt7623-rng" : for MT7623 - clocks : list of clock specifiers, corresponding to entries in clock-names property; diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt index be789685a1c2..18b892d010d8 100644 --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt @@ -27,4 +27,4 @@ and valid to enable charging: - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output - resistor, the other values are in ohm. + resistor, the other values are in kOhm. diff --git a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt index 811124a36d16..1994f601800a 100644 --- a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt +++ b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt @@ -2,6 +2,7 @@ NXP PCF2123 SPI Real Time Clock Required properties: - compatible: should be: "nxp,rtc-pcf2123" + or "microcrystal,rv2123" - reg: should be the SPI slave chipselect address Optional properties: diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt index 76fdabc59742..94adc1cf93d9 100644 --- a/Documentation/devicetree/bindings/rtc/pcf85363.txt +++ b/Documentation/devicetree/bindings/rtc/pcf85363.txt @@ -1,8 +1,8 @@ -NXP PCF85363 Real Time Clock +NXP PCF85263/PCF85363 Real Time Clock ============================ Required properties: -- compatible: Should contain "nxp,pcf85363". +- compatible: Should contain "nxp,pcf85263" or "nxp,pcf85363". - reg: I2C address for chip. Optional properties: diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt index eebfbe04207a..eaee19b60960 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt @@ -35,7 +35,7 @@ Optional properties: Should be given if internal trickle charger diode should be disabled Example: - rtc1: ds1339@68 { + ds1339: rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; interrupt-parent = <&gpio4>; diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt new file mode 100644 index 000000000000..7c8da6926095 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc.txt @@ -0,0 +1,64 @@ +Generic device tree bindings for Real Time Clock devices +======================================================== + +This document describes generic bindings which can be used to describe Real Time +Clock devices in a device tree. + +Required properties +------------------- + +- compatible : name of RTC device following generic names recommended practice. + +For other required properties e.g. to describe register sets, +clocks, etc. check the binding documentation of the specific driver. + +Optional properties +------------------- + +- start-year : if provided, the default hardware range supported by the RTC is + shifted so the first usable year is the specified one. + +The following properties may not be supported by all drivers. However, if a +driver wants to support one of the below features, it should adapt the bindings +below. +- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given + if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode Should be + given if internal trickle charger diode should be + disabled +- wakeup-source : Enables wake up of host system on alarm + +Trivial RTCs +------------ + +This is a list of trivial RTC devices that have simple device tree +bindings, consisting only of a compatible field, an address and +possibly an interrupt line. + + +Compatible Vendor / Chip +========== ============= +abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface +dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output +dallas,ds1672 Dallas DS1672 Real-time Clock +dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM +epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +emmicro,em3027 EM Microelectronic EM3027 Real-time Clock +isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM +isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM +isil,isl12022 Intersil ISL12022 Real-time Clock +microcrystal,rv3029 Real Time Clock Module with I2C-Bus +nxp,pcf2127 Real-time clock +nxp,pcf2129 Real-time clock +nxp,pcf8523 Real-time Clock +nxp,pcf8563 Real-time clock/calendar +nxp,pcf85063 Tiny Real-Time Clock +pericom,pt7c4338 Real-time Clock Module +ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +sii,s35390a 2-wire CMOS real-time clock diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt index 12c083c1140a..6b732c41392b 100644 --- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt @@ -3,25 +3,44 @@ RTC controller for the Allwinner A31 Required properties: -- compatible : Should be "allwinner,sun6i-a31-rtc" +- compatible : Should be one of the following combinations: + - "allwinner,sun6i-a31-rtc" + - "allwinner,sun8i-a23-rtc" + - "allwinner,sun8i-h3-rtc" + - "allwinner,sun8i-r40-rtc", "allwinner,sun8i-h3-rtc" + - "allwinner,sun8i-v3-rtc" + - "allwinner,sun50i-a64-rtc", "allwinner,sun8i-h3-rtc" + - "allwinner,sun50i-h5-rtc" + + Where there are two or more compatible strings, this + denotes the hardware covered by the most specific one + is backward-compatible with the latter ones, and the + implementation for the latter ones can be used, albeit + with reduced functionality. + - reg : physical base address of the controller and length of memory mapped region. - interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order. Required properties for new device trees - clocks : phandle to the 32kHz external oscillator -- clock-output-names : names of the LOSC and its external output clocks created -- #clock-cells : must be equals to 1. The RTC provides two clocks: the - LOSC and its external output, with index 0 and 1 - respectively. +- clock-output-names : names of up to three clock outputs. See below. +- #clock-cells : must be equal to 1. + +The RTC provides the following clocks at the given indices: +- 0: LOSC +- 1: LOSC external output, known as X32KFOUT in the datasheet. + This clock is not available on the A31 and is deprecated for old + device trees still using the "allwinner,sun6i-a31-rtc" compatible. +- 2: InternalOSC, or internal RC oscillator (A64/H3/H5 only) Example: rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + reg = <0x01f00000 0x400>; interrupts = <0 40 4>, <0 41 4>; - clock-output-names = "osc32k", "osc32k-out"; + clock-output-names = "osc32k"; clocks = <&ext_osc32k>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index aeb6db4e35c3..da50321da34d 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -51,6 +51,7 @@ Optional properties: - tx-threshold: Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. - resets : phandle + reset specifier pairs +- overrun-throttle-ms : how long to pause uart rx when input overrun is encountered. Note: * fsl,ns16550: diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index 6bd3f2e93d61..21483ba820bc 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -8,6 +8,8 @@ Required properties: on LS1021A SoC with 32-bit big-endian register organization - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated on i.MX7ULP SoC with 32-bit little-endian register organization + - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated + on i.MX8QXP SoC with 32-bit little-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt index 3acbd309ab9d..40e81a5818f6 100644 --- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt +++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt @@ -6,8 +6,23 @@ Required properties: - interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier depends on the interrupt-parent interrupt controller. +Optional properties: +- clocks: Should contain frequency clock and gate clock +- clock-names: Should be "freq" and "asc" + Example: +asc0: serial@16600000 { + compatible = "lantiq,asc"; + reg = <0x16600000 0x100000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>; + clock-names = "freq", "asc"; +}; + asc1: serial@e100c00 { compatible = "lantiq,asc"; reg = <0xE100C00 0x400>; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index e52e16c6bc57..20232ad05d89 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -24,6 +24,10 @@ Required properties: - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. + - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART. + - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART. + - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. + - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. @@ -61,13 +65,13 @@ Required properties: - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, - - "renesas,rcar-gen2-scif" for R-Car Gen2 SCIF compatible UART, - - "renesas,rcar-gen3-scif" for R-Car Gen3 SCIF compatible UART, - - "renesas,rcar-gen2-scifa" for R-Car Gen2 SCIFA compatible UART, - - "renesas,rcar-gen2-scifb" for R-Car Gen2 SCIFB compatible UART, + - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART, + - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART, + - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART, + - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART, - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, - - "renesas,rcar-gen2-hscif" for R-Car Gen2 HSCIF compatible UART, - - "renesas,rcar-gen3-hscif" for R-Car Gen3 HSCIF compatible UART, + - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART, + - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART, - "renesas,scif" for generic SCIF compatible UART. - "renesas,scifa" for generic SCIFA compatible UART. - "renesas,scifb" for generic SCIFB compatible UART. diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index b7c29f74ebb2..b92592dff6dd 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -16,7 +16,7 @@ Optional properties: - linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485 feature at boot time. It can be disabled later with proper ioctl. - rs485-rx-during-tx: empty property that enables the receiving of data even - whilst sending data. + while sending data. RS485 example for Atmel USART: usart0: serial@fff8c000 { diff --git a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt new file mode 100644 index 000000000000..205a54bcd7c7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt @@ -0,0 +1,18 @@ +Amlogic Internal Clock Measurer +=============================== + +The Amlogic SoCs contains an IP to measure the internal clocks. +The precision is multiple of MHz, useful to debug the clock states. + +Required properties: +- compatible: Shall contain one of the following : + "amlogic,meson-gx-clk-measure" for GX SoCs + "amlogic,meson8-clk-measure" for Meson8 SoCs + "amlogic,meson8b-clk-measure" for Meson8b SoCs +- reg: base address and size of the Clock Measurer register space. + +Example: + clock-measure@8758 { + compatible = "amlogic,meson-gx-clk-measure"; + reg = <0x0 0x8758 0x0 0x10>; + }; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt index 8dd7b3a7de65..f331316183f6 100644 --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt @@ -2,7 +2,8 @@ Broadcom VCHIQ firmware services Required properties: -- compatible: Should be "brcm,bcm2835-vchiq" +- compatible: Should be "brcm,bcm2835-vchiq" on BCM2835, otherwise + "brcm,bcm2836-vchiq". - reg: Physical base address and length of the doorbell register pair - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt index 89e1cb9212f6..ec95705ba692 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt @@ -23,6 +23,7 @@ resources. "qcom,rpm-msm8916" "qcom,rpm-msm8974" "qcom,rpm-msm8998" + "qcom,rpm-qcs404" - qcom,smd-channels: Usage: required diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt index 5d49d0a2ff29..8304eceb62e4 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt @@ -7,7 +7,9 @@ Required properties for power domain controller: - compatible: Should be one of the following. "rockchip,px30-power-controller" - for PX30 SoCs. "rockchip,rk3036-power-controller" - for RK3036 SoCs. + "rockchip,rk3066-power-controller" - for RK3066 SoCs. "rockchip,rk3128-power-controller" - for RK3128 SoCs. + "rockchip,rk3188-power-controller" - for RK3188 SoCs. "rockchip,rk3228-power-controller" - for RK3228 SoCs. "rockchip,rk3288-power-controller" - for RK3288 SoCs. "rockchip,rk3328-power-controller" - for RK3328 SoCs. @@ -23,7 +25,9 @@ Required properties for power domain sub nodes: - reg: index of the power domain, should use macros in: "include/dt-bindings/power/px30-power.h" - for PX30 type power domain. "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain. + "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain. "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain. + "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain. "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain. "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain. diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt index deca5e18f304..ae5f7f057dc3 100644 --- a/Documentation/devicetree/bindings/sound/ak4104.txt +++ b/Documentation/devicetree/bindings/sound/ak4104.txt @@ -12,8 +12,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the device starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the device starts. Example: diff --git a/Documentation/devicetree/bindings/sound/ak4118.txt b/Documentation/devicetree/bindings/sound/ak4118.txt new file mode 100644 index 000000000000..6e11a2f7404c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4118.txt @@ -0,0 +1,22 @@ +AK4118 S/PDIF transceiver + +This device supports I2C mode. + +Required properties: + +- compatible : "asahi-kasei,ak4118" +- reg : The I2C address of the device for I2C +- reset-gpios: A GPIO specifier for the reset pin +- irq-gpios: A GPIO specifier for the IRQ pin + +Example: + +&i2c { + ak4118: ak4118@13 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4118"; + reg = <0x13>; + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW> + irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt new file mode 100644 index 000000000000..2e6cb7d9b202 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt @@ -0,0 +1,22 @@ +* Amlogic Audio SPDIF Input + +Required properties: +- compatible: 'amlogic,axg-spdifin' +- interrupts: interrupt specifier for the spdif input. +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "pclk" : peripheral clock. + * "refclk" : spdif input reference clock +- #sound-dai-cells: must be 0. + +Example on the A113 SoC: + +spdifin: audio-controller@400 { + compatible = "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; +}; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 7e63e53a901c..269682619a70 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -32,7 +32,9 @@ Required properties: Optional properties: - pa-gpios: GPIO used to control external amplifier. +----------------------- Example: Single DAI case +----------------------- sound_card { compatible = "audio-graph-card"; @@ -61,7 +63,9 @@ Example: Single DAI case }; }; +----------------------- Example: Multi DAI case +----------------------- sound-card { compatible = "audio-graph-card"; @@ -130,3 +134,204 @@ Example: Multi DAI case }; }; + +----------------------- +Example: Sampling Rate Conversion +----------------------- + + sound_card { + compatible = "audio-graph-card"; + + label = "sound-card"; + prefix = "codec"; + routing = "codec Playback", "DAI0 Playback", + "DAI0 Capture", "codec Capture"; + convert-rate = <48000>; + + dais = <&cpu_port>; + }; + + audio-codec { + ... + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + }; + +----------------------- +Example: 2 CPU 1 Codec (Mixing) +----------------------- + + sound_card { + compatible = "audio-graph-card"; + + label = "sound-card"; + routing = "codec Playback", "DAI0 Playback", + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; + + dais = <&cpu_port>; + }; + + audio-codec { + ... + + audio-graph-card,prefix = "codec"; + audio-graph-card,convert-rate = <48000>; + port { + reg = <0>; + codec_endpoint0: endpoint@0 { + remote-endpoint = <&cpu_endpoint0>; + }; + codec_endpoint1: endpoint@1 { + remote-endpoint = <&cpu_endpoint1>; + }; + }; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint0: endpoint@0 { + remote-endpoint = <&codec_endpoint0>; + + dai-format = "left_j"; + ... + }; + cpu_endpoint1: endpoint@1 { + remote-endpoint = <&codec_endpoint1>; + + dai-format = "left_j"; + ... + }; + }; + }; + +----------------------- +Example: Multi DAI with DPCM +----------------------- + + CPU0 ------ ak4613 + CPU1 ------ HDMI + CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */ + CPU3 --/ /* DPCM 3ch/4ch */ + CPU4 --/ /* DPCM 5ch/6ch */ + CPU5 --/ /* DPCM 7ch/8ch */ + CPU6 ------ PCM3168A-c + + sound_card: sound { + compatible = "audio-graph-card"; + + label = "sound-card"; + + routing = "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback"; + + dais = <&snd_port0 /* ak4613 */ + &snd_port1 /* HDMI0 */ + &snd_port2 /* pcm3168a playback */ + &snd_port3 /* pcm3168a capture */ + >; + }; + + ak4613: codec@10 { + ... + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; + + pcm3168a: audio-codec@44 { + ... + audio-graph-card,prefix = "pcm3168a"; + audio-graph-card,convert-channels = <8>; /* TDM Split */ + ports { + port@0 { + reg = <0>; + pcm3168a_endpoint_p1: endpoint@1 { + remote-endpoint = <&rsnd_endpoint2>; + ... + }; + pcm3168a_endpoint_p2: endpoint@2 { + remote-endpoint = <&rsnd_endpoint3>; + ... + }; + pcm3168a_endpoint_p3: endpoint@3 { + remote-endpoint = <&rsnd_endpoint4>; + ... + }; + pcm3168a_endpoint_p4: endpoint@4 { + remote-endpoint = <&rsnd_endpoint5>; + ... + }; + }; + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_endpoint6>; + ... + }; + }; + }; + }; + + &sound { + ports { + snd_port0: port@0 { + rsnd_endpoint0: endpoint { + remote-endpoint = <&ak4613_endpoint>; + ... + }; + }; + snd_port1: port@1 { + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + ... + }; + }; + snd_port2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + rsnd_endpoint2: endpoint@2 { + remote-endpoint = <&pcm3168a_endpoint_p1>; + ... + }; + rsnd_endpoint3: endpoint@3 { + remote-endpoint = <&pcm3168a_endpoint_p2>; + ... + }; + rsnd_endpoint4: endpoint@4 { + remote-endpoint = <&pcm3168a_endpoint_p3>; + ... + }; + rsnd_endpoint5: endpoint@5 { + remote-endpoint = <&pcm3168a_endpoint_p4>; + ... + }; + }; + snd_port3: port@6 { + rsnd_endpoint6: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + ... + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index 441dd6f29df1..62d42768a00b 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -77,11 +77,9 @@ Example 2. 2 CPU 1 Codec (Mixing) compatible = "audio-graph-scu-card"; label = "sound-card"; - prefix = "codec"; routing = "codec Playback", "DAI0 Playback", "codec Playback", "DAI1 Playback", "DAI0 Capture", "codec Capture"; - convert-rate = <48000>; dais = <&cpu_port0 &cpu_port1>; @@ -90,6 +88,8 @@ Example 2. 2 CPU 1 Codec (Mixing) audio-codec { ... + audio-graph-card,prefix = "codec"; + audio-graph-card,convert-rate = <48000>; port { codec_endpoint0: endpoint { remote-endpoint = <&cpu_endpoint0>; diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt index 6b222f9b8ef5..c33770ec4c3c 100644 --- a/Documentation/devicetree/bindings/sound/cs4270.txt +++ b/Documentation/devicetree/bindings/sound/cs4270.txt @@ -10,8 +10,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. Example: diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index 46bc9829c71a..b279b6072bd5 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -30,6 +30,11 @@ Optional properties: - ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0 - tx-num-evt : FIFO levels. - rx-num-evt : FIFO levels. +- dismod : Specify the drive on TX pin during inactive slots + 0 : 3-state + 2 : logic low + 3 : logic high + Defaults to 'logic low' when the property is not present - sram-size-playback : size of sram to be allocated during playback - sram-size-capture : size of sram to be allocated during capture - interrupts : Interrupt numbers for McASP diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt index e957b4136716..32e871037269 100644 --- a/Documentation/devicetree/bindings/sound/dmic.txt +++ b/Documentation/devicetree/bindings/sound/dmic.txt @@ -9,6 +9,7 @@ Optional properties: - dmicen-gpios: GPIO specifier for dmic to control start and stop - num-channels: Number of microphones on this DAI - wakeup-delay-ms: Delay (in ms) after enabling the DMIC + - modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch Example node: @@ -17,4 +18,5 @@ Example node: dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; num-channels = <1>; wakeup-delay-ms <50>; + modeswitch-delay-ms <35>; }; diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index dd9e59738e08..2e726b983845 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -35,13 +35,13 @@ Required properties: - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating that SAI will work in the synchronous mode (sync Tx - with Rx) which means both the transimitter and the + with Rx) which means both the transmitter and the receiver will send and receive data by following receiver's bit clocks and frame sync clocks. - fsl,sai-asynchronous: This is a boolean property. If present, indicating that SAI will work in the asynchronous mode, which - means both transimitter and receiver will send and + means both transmitter and receiver will send and receive data by following their own bit clocks and frame sync clocks separately. @@ -58,8 +58,8 @@ Optional properties (for mx6ul): Note: - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the default synchronous mode (sync Rx with Tx) will be used, which means both - transimitter and receiver will send and receive data by following clocks - of transimitter. + transmitter and receiver will send and receive data by following clocks + of transmitter. - fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive. Example: diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt index 5f4e68ca228c..ff98a0cb5b3f 100644 --- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt @@ -7,6 +7,8 @@ Required properties: <L3 interconnect address, size>; - interrupts: Interrupt number for McPDM - ti,hwmods: Name of the hwmod associated to the McPDM +- clocks: phandle for the pdmclk provider, likely <&twl6040> +- clock-names: Must be "pdmclk" Example: @@ -18,3 +20,11 @@ mcpdm: mcpdm@40132000 { interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; + +In board DTS file the pdmclk needs to be added: + +&mcpdm { + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/sound/pcm3060.txt b/Documentation/devicetree/bindings/sound/pcm3060.txt index 90fcb8523099..97de66932d44 100644 --- a/Documentation/devicetree/bindings/sound/pcm3060.txt +++ b/Documentation/devicetree/bindings/sound/pcm3060.txt @@ -9,9 +9,15 @@ Required properties: - reg : the I2C address of the device for I2C, the chip select number for SPI. +Optional properties: + +- ti,out-single-ended: "true" if output is single-ended; + "false" or not specified if output is differential. + Examples: pcm3060: pcm3060@46 { compatible = "ti,pcm3060"; reg = <0x46>; + ti,out-single-ended = "true"; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt index f9c7bd8c1bc0..9f5378c51686 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt @@ -27,6 +27,28 @@ used by the apr service device. Value type: <u32> Definition: Must be 1 +== ASM DAI is subnode of "dais" and represent a dai, it includes board specific +configuration of each dai. Must contain the following properties. + +- reg + Usage: required + Value type: <u32> + Definition: Must be dai id + +- direction: + Usage: Required for Compress offload dais + Value type: <u32> + Definition: Specifies the direction of the dai stream + 0 for both tx and rx + 1 for only tx (Capture/Encode) + 2 for only rx (Playback/Decode) + +- is-compress-dai: + Usage: Required for Compress offload dais + Value type: <boolean> + Definition: present for Compress offload dais + + = EXAMPLE q6asm@7 { @@ -35,5 +57,10 @@ q6asm@7 { q6asmdai: dais { compatible = "qcom,q6asm-dais"; #sound-dai-cells = <1>; + mm@0 { + reg = <0>; + direction = <2>; + is-compress-dai; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index d92b705e7917..648d43e1b1e9 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -39,15 +39,7 @@ This is example of Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec] Capture: [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec] - &rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; - }; - }; - }; +see "Example: simple sound card" You can use below. ${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example. @@ -83,29 +75,8 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes ** Asynchronous mode ------------------ -You need to use "simple-scu-audio-card" sound card for it. -example) - - sound { - compatible = "simple-scu-audio-card"; - ... - /* - * SRC Asynchronous mode setting - * Playback: - * All input data will be converted to 48kHz - * Capture: - * Inputed 48kHz data will be converted to - * system specified Hz - */ - simple-audio-card,convert-rate = <48000>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; - }; +You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it. +see "Example: simple sound card for Asynchronous mode" ------------------ ** Synchronous mode @@ -141,26 +112,8 @@ For more detail information, see below ${LINUX}/sound/soc/sh/rcar/ctu.c - comment of header -You need to use "simple-scu-audio-card" sound card for it. -example) - - sound { - compatible = "simple-scu-audio-card"; - ... - /* - * CTU setting - * All input data will be converted to 2ch - * as output data - */ - simple-audio-card,convert-channels = <2>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; - }; +You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it. +see "Example: simple sound card for channel convert" Ex) Exchange output channel Input -> Output @@ -190,42 +143,13 @@ and these sounds will be merged by MIX. aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,1 yyyy.wav -You need to use "simple-scu-audio-card" sound card for it. +You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it. Ex) [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] | [MEM] -> [SRC2] -> [CTU03] -+ - sound { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "simple-scu-audio-card"; - ... - simple-audio-card,cpu@0 { - reg = <0>; - sound-dai = <&rcar_sound 0>; - }; - simple-audio-card,cpu@1 { - reg = <1>; - sound-dai = <&rcar_sound 1>; - }; - simple-audio-card,codec { - ... - }; - }; - - &rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; - }; - dai1 { - playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; - }; - }; - }; +see "Example: simple sound card for MIXer" ============================================= * DVC (Digital Volume and Mute Function) @@ -257,15 +181,31 @@ Volume Ramp * SSIU (Serial Sound Interface Unit) ============================================= -There is no DT settings for SSIU, because SSIU will be automatically -selected via SSI. SSIU can avoid some under/over run error, because it has some buffer. But you can't use it if SSI was PIO mode. -In DMA mode, you can select not to use SSIU by using "no-busif" on DT. +In DMA mode, you can select not to use SSIU by using "no-busif" via SSI. - &ssi0 { - no-busif; - }; +SSIU handles BUSIF which will be used for TDM Split mode. +This driver is assuming that audio-graph card will be used. + +TDM Split mode merges 4 sounds. You can see 4 sound interface on system, +and these sounds will be merged SSIU/SSI. + + aplay -D plughw:0,0 xxxx.wav & + aplay -D plughw:0,1 xxxx.wav & + aplay -D plughw:0,2 xxxx.wav & + aplay -D plughw:0,3 xxxx.wav + + 2ch 8ch + [MEM] -> [SSIU 30] -+-> [SSIU 3] --> [Codec] + 2ch | + [MEM] -> [SSIU 31] -+ + 2ch | + [MEM] -> [SSIU 32] -+ + 2ch | + [MEM] -> [SSIU 33] -+ + +see "Example: simple sound card for TDM Split" ============================================= * SSI (Serial Sound Interface) @@ -304,14 +244,7 @@ This is example if SSI1 want to share WS pin with SSI0 You can use Multi-SSI. This is example of SSI0/SSI1/SSI2 (= for 6ch) - &rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>; - }; - }; - }; +see "Example: simple sound card for Multi channel" ** TDM-SSI @@ -319,19 +252,7 @@ You can use TDM with SSI. This is example of TDM 6ch. Driver can automatically switches TDM <-> stereo mode in this case. - rsnd_tdm: sound { - compatible = "simple-audio-card"; - ... - simple-audio-card,cpu { - /* system can use TDM 6ch */ - dai-tdm-slot-num = <6>; - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; - }; - +see "Example: simple sound card for TDM" ============================================= Required properties: @@ -346,6 +267,7 @@ Required properties: - "renesas,rcar_sound-r8a7744" (RZ/G1N) - "renesas,rcar_sound-r8a7745" (RZ/G1E) - "renesas,rcar_sound-r8a774a1" (RZ/G2M) + - "renesas,rcar_sound-r8a774c0" (RZ/G2E) - "renesas,rcar_sound-r8a7778" (R-Car M1A) - "renesas,rcar_sound-r8a7779" (R-Car H1) - "renesas,rcar_sound-r8a7790" (R-Car H2) @@ -356,6 +278,7 @@ Required properties: - "renesas,rcar_sound-r8a7796" (R-Car M3-W) - "renesas,rcar_sound-r8a77965" (R-Car M3-N) - "renesas,rcar_sound-r8a77990" (R-Car E3) + - "renesas,rcar_sound-r8a77995" (R-Car D3) - reg : Should contain the register physical address. required register is SRU/ADG/SSI if generation1 @@ -363,6 +286,9 @@ Required properties: - rcar_sound,ssi : Should contain SSI feature. The number of SSI subnode should be same as HW. see below for detail. +- rcar_sound,ssiu : Should contain SSIU feature. + The number of SSIU subnode should be same as HW. + see below for detail. - rcar_sound,src : Should contain SRC feature. The number of SRC subnode should be same as HW. see below for detail. @@ -402,8 +328,13 @@ SSI subnode properties: - no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case - dma : Should contain Audio DMAC entry - dma-names : SSI case "rx" (=playback), "tx" (=capture) + Deprecated: see SSIU subnode properties SSIU case "rxu" (=playback), "txu" (=capture) +SSIU subnode properties: +- dma : Should contain Audio DMAC entry +- dma-names : "rx" (=playback), "tx" (=capture) + SRC subnode properties: - dma : Should contain Audio DMAC entry - dma-names : "rx" (=playback), "tx" (=capture) @@ -532,56 +463,55 @@ rcar_sound: sound@ec500000 { }; }; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + + ... + + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssi { ssi0: ssi-0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi2: ssi-2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi3: ssi-3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi4: ssi-4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi5: ssi-5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi6: ssi-6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi7: ssi-7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; + + ... + ssi8: ssi-8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; @@ -647,25 +577,174 @@ Example: simple sound card }; ============================================= +Example: simple sound card for Asynchronous mode +============================================= + +sound { + compatible = "simple-scu-audio-card"; + ... + /* + * SRC Asynchronous mode setting + * Playback: + * All input data will be converted to 48kHz + * Capture: + * Inputed 48kHz data will be converted to + * system specified Hz + */ + simple-audio-card,convert-rate = <48000>; + ... + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + simple-audio-card,codec { + ... + }; +}; + +============================================= +Example: simple sound card for channel convert +============================================= + +sound { + compatible = "simple-scu-audio-card"; + ... + /* + * CTU setting + * All input data will be converted to 2ch + * as output data + */ + simple-audio-card,convert-channels = <2>; + ... + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + simple-audio-card,codec { + ... + }; +}; + +============================================= +Example: simple sound card for MIXer +============================================= + +sound { + compatible = "simple-scu-audio-card"; + ... + simple-audio-card,cpu@0 { + sound-dai = <&rcar_sound 0>; + }; + simple-audio-card,cpu@1 { + sound-dai = <&rcar_sound 1>; + }; + simple-audio-card,codec { + ... + }; +}; + +&rcar_sound { + ... + rcar_sound,dai { + dai0 { + playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; + }; + dai1 { + playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; + }; + }; +}; + +============================================= Example: simple sound card for TDM ============================================= - rsnd_tdm: sound { - compatible = "simple-audio-card"; +rsnd_tdm: sound { + compatible = "simple-audio-card"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - dai-tdm-slot-num = <6>; + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + dai-tdm-slot-num = <6>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&xxx>; + }; +}; + +============================================= +Example: simple sound card for TDM Split +============================================= + +sound_card: sound { + compatible = "audio-graph-scu-card"; + prefix = "xxxx"; + routing = "xxxx Playback", "DAI0 Playback", + "xxxx Playback", "DAI1 Playback", + "xxxx Playback", "DAI2 Playback", + "xxxx Playback", "DAI3 Playback"; + convert-channels = <8>; /* TDM Split */ + + dais = <&rsnd_port0 /* playback ch1/ch2 */ + &rsnd_port1 /* playback ch3/ch4 */ + &rsnd_port2 /* playback ch5/ch6 */ + &rsnd_port3 /* playback ch7/ch8 */ + >; +}; + +audio-codec { + ... + port { + codec_0: endpoint@1 { + remote-endpoint = <&rsnd_ep0>; + }; + codec_1: endpoint@2 { + remote-endpoint = <&rsnd_ep1>; + }; + codec_2: endpoint@3 { + remote-endpoint = <&rsnd_ep2>; + }; + codec_3: endpoint@4 { + remote-endpoint = <&rsnd_ep3>; }; + }; +}; - sndcodec: simple-audio-card,codec { - sound-dai = <&xxx>; +&rcar_sound { + ... + ports { + rsnd_port0: port@0 { + rsnd_ep0: endpoint { + remote-endpoint = <&codec_0>; + ... + playback = <&ssiu30 &ssi3>; + }; + }; + rsnd_port1: port@1 { + rsnd_ep1: endpoint { + remote-endpoint = <&codec_1>; + ... + playback = <&ssiu31 &ssi3>; + }; + }; + rsnd_port2: port@2 { + rsnd_ep2: endpoint { + remote-endpoint = <&codec_2>; + ... + playback = <&ssiu32 &ssi3>; + }; + }; + rsnd_port3: port@3 { + rsnd_ep3: endpoint { + remote-endpoint = <&codec_3>; + ... + playback = <&ssiu33 &ssi3>; + }; }; }; +}; ============================================= Example: simple sound card for Multi channel diff --git a/Documentation/devicetree/bindings/sound/rt5631.txt b/Documentation/devicetree/bindings/sound/rt5631.txt index 92b986ca337b..56bc85232c49 100644 --- a/Documentation/devicetree/bindings/sound/rt5631.txt +++ b/Documentation/devicetree/bindings/sound/rt5631.txt @@ -35,14 +35,14 @@ Pins on the device (for linking into audio routes): Example: -alc5631: alc5631@1a { +alc5631: audio-codec@1a { compatible = "realtek,alc5631"; reg = <0x1a>; }; or -rt5631: rt5631@1a { +rt5631: audio-codec@1a { compatible = "realtek,rt5631"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 23386446c63d..2a55e9133408 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -10,6 +10,10 @@ Required properties: - interrupts : The CODEC's interrupt output. +- avdd-supply: Power supply for AVDD, providing 1.8V. + +- cpvdd-supply: Power supply for CPVDD, providing 3.5V. + Optional properties: - "realtek,dc_offset_l_manual" @@ -51,4 +55,6 @@ rt5663: codec@12 { compatible = "realtek,rt5663"; reg = <0x12>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&pp1800_a_alc5662>; + cpvdd-supply = <&pp3500_a_alc5662>; }; diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt index 8647edae7af0..7182ac4f1e65 100644 --- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt +++ b/Documentation/devicetree/bindings/sound/simple-amplifier.txt @@ -4,9 +4,14 @@ Required properties: - compatible : "dioo,dio2125" or "simple-audio-amplifier" - enable-gpios : the gpio connected to the enable pin of the simple amplifier +Optional properties: +- VCC-supply : power supply for the device, as covered + in Documentation/devicetree/bindings/regulator/regulator.txt + Example: amp: analog-amplifier { compatible = "simple-audio-amplifier"; + VCC-supply = <®ulator>; enable-gpios = <&gpio GPIOH_3 0>; }; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index a4c72d09cd45..4629c8f8a6b6 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -95,7 +95,9 @@ Optional CPU/CODEC subnodes properties: initialization. It is useful for some aCPUs with fixed clocks. +------------------------------------------- Example 1 - single DAI link: +------------------------------------------- sound { compatible = "simple-audio-card"; @@ -138,7 +140,9 @@ sh_fsi2: sh_fsi2@ec230000 { interrupts = <0 146 0x4>; }; +------------------------------------------- Example 2 - many DAI links: +------------------------------------------- sound { compatible = "simple-audio-card"; @@ -176,8 +180,10 @@ sound { }; }; +------------------------------------------- Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec through TPA6130A2 amplifier to headphones: +------------------------------------------- &i2c0 { codec: tlv320dac3100@18 { @@ -210,3 +216,134 @@ sound { clocks = ... }; }; + +------------------------------------------- +Example 4. Sampling Rate Conversion +------------------------------------------- + +sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + simple-audio-card,convert-rate = <48000>; + + simple-audio-card,prefix = "ak4642"; + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "DAI0 Capture", "ak4642 Capture"; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; +}; + +------------------------------------------- +Example 5. 2 CPU 1 Codec (Mixing) +------------------------------------------- +sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dpcmcpu>; + simple-audio-card,frame-master = <&dpcmcpu>; + + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "ak4642 Playback", "DAI1 Playback"; + + dpcmcpu: cpu@0 { + sound-dai = <&rcar_sound 0>; + }; + + cpu@1 { + sound-dai = <&rcar_sound 1>; + }; + + codec { + prefix = "ak4642"; + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; +}; + +------------------------------------------- +Example 6 - many DAI links with DPCM: +------------------------------------------- + +CPU0 ------ ak4613 +CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */ +CPU2 --/ /* DPCM 3ch/4ch */ +CPU3 --/ /* DPCM 5ch/6ch */ +CPU4 --/ /* DPCM 7ch/8ch */ +CPU5 ------ PCM3168A-c + +sound { + compatible = "simple-audio-card"; + + simple-audio-card,routing = + "pcm3168a Playback", "DAI1 Playback", + "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback"; + + simple-audio-card,dai-link@0 { + format = "left_j"; + bitclock-master = <&sndcpu0>; + frame-master = <&sndcpu0>; + + sndcpu0: cpu { + sound-dai = <&rcar_sound 0>; + }; + codec { + sound-dai = <&ak4613>; + }; + }; + simple-audio-card,dai-link@1 { + format = "i2s"; + bitclock-master = <&sndcpu1>; + frame-master = <&sndcpu1>; + + convert-channels = <8>; /* TDM Split */ + + sndcpu1: cpu@0 { + sound-dai = <&rcar_sound 1>; + }; + cpu@1 { + sound-dai = <&rcar_sound 2>; + }; + cpu@2 { + sound-dai = <&rcar_sound 3>; + }; + cpu@3 { + sound-dai = <&rcar_sound 4>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + dai-tdm-slot-num = <8>; + sound-dai = <&pcm3168a 0>; + }; + }; + simple-audio-card,dai-link@2 { + format = "i2s"; + bitclock-master = <&sndcpu2>; + frame-master = <&sndcpu2>; + + sndcpu2: cpu { + sound-dai = <&rcar_sound 5>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + sound-dai = <&pcm3168a 1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt index 32f8dbce5241..3a2f71616cda 100644 --- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt @@ -75,7 +75,6 @@ sound { simple-audio-card,bitclock-master = <&dpcmcpu>; simple-audio-card,frame-master = <&dpcmcpu>; - simple-audio-card,prefix = "ak4642"; simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", "ak4642 Playback", "DAI1 Playback"; @@ -88,6 +87,7 @@ sound { }; codec { + prefix = "ak4642"; sound-dai = <&ak4643>; clocks = <&audio_clock>; }; diff --git a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt index 4f8ad0e04d20..056a098495cc 100644 --- a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt +++ b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt @@ -4,9 +4,11 @@ Required properties: - compatible: must be one of the following compatibles: - "allwinner,sun50i-a64-codec-analog" - reg: must contain the registers location and length +- cpvdd-supply: Regulator supply for the headphone amplifier Example: codec_analog: codec-analog@1f015c0 { compatible = "allwinner,sun50i-a64-codec-analog"; reg = <0x01f015c0 0x4>; + cpvdd-supply = <®_eldo1>; }; diff --git a/Documentation/devicetree/bindings/sound/xlnx,i2s.txt b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt new file mode 100644 index 000000000000..5e7c7d5bb60a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt @@ -0,0 +1,28 @@ +Device-Tree bindings for Xilinx I2S PL block + +The IP supports I2S based playback/capture audio + +Required property: + - compatible: "xlnx,i2s-transmitter-1.0" for playback and + "xlnx,i2s-receiver-1.0" for capture + +Required property common to both I2S playback and capture: + - reg: Base address and size of the IP core instance. + - xlnx,dwidth: sample data width. Can be any of 16, 24. + - xlnx,num-channels: Number of I2S streams. Can be any of 1, 2, 3, 4. + supported channels = 2 * xlnx,num-channels + +Example: + + i2s_receiver@a0080000 { + compatible = "xlnx,i2s-receiver-1.0"; + reg = <0x0 0xa0080000 0x0 0x10000>; + xlnx,dwidth = <0x18>; + xlnx,num-channels = <1>; + }; + i2s_transmitter@a0090000 { + compatible = "xlnx,i2s-transmitter-1.0"; + reg = <0x0 0xa0090000 0x0 0x10000>; + xlnx,dwidth = <0x18>; + xlnx,num-channels = <1>; + }; diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt index b93c1e2f25dd..b93c1e2f25dd 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt new file mode 100644 index 000000000000..1fd9a4406a1d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt @@ -0,0 +1,43 @@ +Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver + +Nuvoton NPCM7xx SOC support two PSPI channels. + +Required properties: + - compatible : "nuvoton,npcm750-pspi" for NPCM7XX BMC + - #address-cells : should be 1. see spi-bus.txt + - #size-cells : should be 0. see spi-bus.txt + - specifies physical base address and size of the register. + - interrupts : contain PSPI interrupt. + - clocks : phandle of PSPI reference clock. + - clock-names: Should be "clk_apb5". + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + - cs-gpios: Specifies the gpio pins to be used for chipselects. + See: Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +- clock-frequency : Input clock frequency to the PSPI block in Hz. + Default is 25000000 Hz. + +Aliases: +- All the SPI controller nodes should be represented in the aliases node using + the following format 'spi{n}' withe the correct numbered in "aliases" node. + +Example: + +aliases { + spi0 = &spi0; +}; + +spi0: spi@f0200000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0xf0200000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi1_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt index 2ba5f9c023ac..487208c256c0 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.txt +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt @@ -2,6 +2,7 @@ OMAP2+ McSPI device Required properties: - compatible : + - "ti,am654-mcspi" for AM654. - "ti,omap2-mcspi" for OMAP2 & OMAP3. - "ti,omap4-mcspi" for OMAP4+. - ti,spi-num-cs : Number of chipselect supported by the instance. diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 4b836ad17b19..37cf69586d10 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -5,6 +5,7 @@ Required properties: "renesas,msiof-r8a7744" (RZ/G1N) "renesas,msiof-r8a7745" (RZ/G1E) "renesas,msiof-r8a774a1" (RZ/G2M) + "renesas,msiof-r8a774c0" (RZ/G2E) "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt index 8d178a4503cf..6cc3c6fe25a3 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt @@ -5,8 +5,11 @@ Required properties: - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc - reg : address and length of the lpspi master registers +- interrupt-parent : core interrupt controller - interrupts : lpspi interrupt - clocks : lpspi clock specifier +- spi-slave : spi slave mode support. In slave mode, add this attribute without + value. In master mode, remove it. Examples: @@ -16,4 +19,5 @@ lpspi2: lpspi@40290000 { interrupt-parent = <&intc>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7ULP_CLK_LPSPI2>; + spi-slave; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index 236dcb0faf37..69c356767cf8 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -6,8 +6,10 @@ Required properties: - mediatek,mt2712-spi: for mt2712 platforms - mediatek,mt6589-spi: for mt6589 platforms - mediatek,mt7622-spi: for mt7622 platforms + - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms - mediatek,mt8135-spi: for mt8135 platforms - mediatek,mt8173-spi: for mt8173 platforms + - mediatek,mt8183-spi: for mt8183 platforms - #address-cells: should be 1. diff --git a/Documentation/devicetree/bindings/spi/spi-mxic.txt b/Documentation/devicetree/bindings/spi/spi-mxic.txt new file mode 100644 index 000000000000..529f2dab2648 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-mxic.txt @@ -0,0 +1,34 @@ +Macronix SPI controller Device Tree Bindings +-------------------------------------------- + +Required properties: +- compatible: should be "mxicy,mx25f0a-spi" +- #address-cells: should be 1 +- #size-cells: should be 0 +- reg: should contain 2 entries, one for the registers and one for the direct + mapping area +- reg-names: should contain "regs" and "dirmap" +- interrupts: interrupt line connected to the SPI controller +- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" +- clocks: should contain 3 entries for the "ps_clk", "send_clk" and + "send_dly_clk" clocks + +Example: + + spi@43c30000 { + compatible = "mxicy,mx25f0a-spi"; + reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>; + reg-names = "regs", "dirmap"; + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>; + clock-names = "send_clk", "send_dly_clk", "ps_clk"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt index 0335a9bd2e8a..e30e0c2a4bce 100644 --- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt @@ -11,6 +11,9 @@ Required properties: Optional properties: - cs-gpios: list of GPIO chip selects. See the SPI bus bindings, Documentation/devicetree/bindings/spi/spi-bus.txt +- spi-slave: Empty property indicating the SPI controller is used in slave mode. +- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled + and we're ready to service a transfer. Only useful in slave mode. Child nodes represent devices on the SPI bus See ../spi/spi-bus.txt diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index fc97ad64fbf2..421722b93992 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt @@ -15,6 +15,7 @@ Required properties: - "renesas,qspi-r8a7743" (RZ/G1M) - "renesas,qspi-r8a7744" (RZ/G1N) - "renesas,qspi-r8a7745" (RZ/G1E) + - "renesas,qspi-r8a77470" (RZ/G1C) - "renesas,qspi-r8a7790" (R-Car H2) - "renesas,qspi-r8a7791" (R-Car M2-W) - "renesas,qspi-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt index 504a4ecfc7b1..e1201573a29a 100644 --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt +++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt @@ -7,8 +7,11 @@ Required properties: - reg: address and length of the spi master registers - #address-cells: must be <1>, see spi-bus.txt - #size-cells: must be <0>, see spi-bus.txt - - clocks: A phandle to the clock for the device. - - resets: A phandle to the reset control for the device. + - interrupts: a single interrupt specifier + - pinctrl-names: should be "default" + - pinctrl-0: pin control state for the default mode + - clocks: a phandle to the clock for the device + - resets: a phandle to the reset control for the device Example: @@ -17,6 +20,9 @@ spi0: spi@54006000 { reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; resets = <&peri_rst 11>; }; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 62dd0748f0ef..ab5a70bb9a64 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -18,7 +18,9 @@ Required properties: - "allwinner,sun8i-h3-system-control" - "allwinner,sun50i-a64-sram-controller" (deprecated) - "allwinner,sun50i-a64-system-control" + - "allwinner,sun50i-h5-system-control" - "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control" + - "allwinner,suniv-f1c100s-system-control", "allwinner,sun4i-a10-system-control" - reg : sram controller register offset + length SRAM nodes @@ -54,10 +56,17 @@ The valid sections compatible for H3 are: The valid sections compatible for A64 are: - allwinner,sun50i-a64-sram-c + - allwinner,sun50i-a64-sram-c1, allwinner,sun4i-a10-sram-c1 + +The valid sections compatible for H5 are: + - allwinner,sun50i-h5-sram-c1, allwinner,sun4i-a10-sram-c1 The valid sections compatible for H6 are: - allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c +The valid sections compatible for F1C100s are: + - allwinner,suniv-f1c100s-sram-d, allwinner,sun4i-a10-sram-d + Devices using SRAM sections --------------------------- diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt index 276387dd6815..e17c07be270b 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -15,7 +15,8 @@ Required properties: - compatible: Array of strings. One of: - - "nvidia,tegra186-bpmp-thermal". + - "nvidia,tegra186-bpmp-thermal" + - "nvidia,tegra194-bpmp-thermal" - #thermal-sensor-cells: Cell for sensor index. Single-cell integer. Must be <1>. diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt index a092053f7902..a9da22bda912 100644 --- a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt @@ -4,12 +4,19 @@ Required properties: - compatible : should be "amlogic,meson6-timer" - reg : Specifies base physical address and size of the registers. -- interrupts : The interrupt of the first timer +- interrupts : The four interrupts, one for each timer event +- clocks : phandles to the pclk (system clock) and XTAL clocks +- clock-names : must contain "pclk" and "xtal" Example: timer@c1109940 { compatible = "amlogic,meson6-timer"; reg = <0xc1109940 0x14>; - interrupts = <0 10 1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "pclk"; }; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt b/Documentation/devicetree/bindings/timer/arm,arch_timer.txt deleted file mode 100644 index 68301b77e854..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt +++ /dev/null @@ -1,112 +0,0 @@ -* ARM architected timer - -ARM cores may have a per-core architected timer, which provides per-cpu timers, -or a memory mapped architected timer, which provides up to 8 frames with a -physical and optional virtual timer per frame. - -The per-core architected timer is attached to a GIC to deliver its -per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC -to deliver its interrupts via SPIs. - -** CP15 Timer node properties: - -- compatible : Should at least contain one of - "arm,armv7-timer" - "arm,armv8-timer" - -- interrupts : Interrupt list for secure, non-secure, virtual and - hypervisor timers, in that order. - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only where necessary to work around broken firmware which does not configure - CNTFRQ on all CPUs to a uniform correct value. Use of this property is - strongly discouraged; fix your firmware unless absolutely impossible. - -- always-on : a boolean property. If present, the timer is powered through an - always-on power domain, therefore it never loses context. - -- fsl,erratum-a008585 : A boolean property. Indicates the presence of - QorIQ erratum A-008585, which says that reading the counter is - unreliable unless the same value is returned by back-to-back reads. - This also affects writes to the tval register, due to the implicit - counter read. - -- hisilicon,erratum-161010101 : A boolean property. Indicates the - presence of Hisilicon erratum 161010101, which says that reading the - counters is unreliable in some cases, and reads may return a value 32 - beyond the correct value. This also affects writes to the tval - registers, due to the implicit counter read. - -** Optional properties: - -- arm,cpu-registers-not-fw-configured : Firmware does not initialize - any of the generic timer CPU registers, which contain their - architecturally-defined reset values. Only supported for 32-bit - systems which follow the ARMv7 architected reset values. - -- arm,no-tick-in-suspend : The main counter does not tick when the system is in - low-power system suspend on some SoCs. This behavior does not match the - Architecture Reference Manual's specification that the system counter "must - be implemented in an always-on power domain." - - -Example: - - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - clock-frequency = <100000000>; - }; - -** Memory mapped timer node properties: - -- compatible : Should at least contain "arm,armv7-timer-mem". - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only when firmware has not configured the MMIO CNTFRQ registers. - -- reg : The control frame base address. - -Note that #address-cells, #size-cells, and ranges shall be present to ensure -the CPU can address a frame's registers. - -A timer node has up to 8 frame sub-nodes, each with the following properties: - -- frame-number: 0 to 7. - -- interrupts : Interrupt list for physical and virtual timers in that order. - The virtual timer interrupt is optional. - -- reg : The first and second view base addresses in that order. The second view - base address is optional. - -- status : "disabled" indicates the frame is not available for use. Optional. - -Example: - - timer@f0000000 { - compatible = "arm,armv7-timer-mem"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0xf0000000 0x1000>; - clock-frequency = <50000000>; - - frame@f0001000 { - frame-number = <0> - interrupts = <0 13 0x8>, - <0 14 0x8>; - reg = <0xf0001000 0x1000>, - <0xf0002000 0x1000>; - }; - - frame@f0003000 { - frame-number = <1> - interrupts = <0 15 0x8>; - reg = <0xf0003000 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml new file mode 100644 index 000000000000..6deead07728e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM architected timer + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + - Mark Rutland <mark.rutland@arm.com> +description: |+ + ARM cores may have a per-core architected timer, which provides per-cpu timers, + or a memory mapped architected timer, which provides up to 8 frames with a + physical and optional virtual timer per frame. + + The per-core architected timer is attached to a GIC to deliver its + per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC + to deliver its interrupts via SPIs. + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,cortex-a15-timer + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv8-timer + + interrupts: + items: + - description: secure timer irq + - description: non-secure timer irq + - description: virtual timer irq + - description: hypervisor timer irq + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + fsl,erratum-a008585: + type: boolean + description: Indicates the presence of QorIQ erratum A-008585, which says + that reading the counter is unreliable unless the same value is returned + by back-to-back reads. This also affects writes to the tval register, due + to the implicit counter read. + + hisilicon,erratum-161010101: + type: boolean + description: Indicates the presence of Hisilicon erratum 161010101, which + says that reading the counters is unreliable in some cases, and reads may + return a value 32 beyond the correct value. This also affects writes to + the tval registers, due to the implicit counter read. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +required: + - compatible + +oneOf: + - required: + - interrupts + - required: + - interrupts-extended + +examples: + - | + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml new file mode 100644 index 000000000000..c4ab59550fc2 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM memory mapped architected timer + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + - Mark Rutland <mark.rutland@arm.com> + +description: |+ + ARM cores may have a memory mapped architected timer, which provides up to 8 + frames with a physical and optional virtual timer per frame. + + The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs. + +properties: + compatible: + items: + - enum: + - arm,armv7-timer-mem + + reg: + maxItems: 1 + description: The control frame base address + + '#address-cells': + enum: [1, 2] + + '#size-cells': + const: 1 + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +patternProperties: + '^frame@[0-9a-z]*$': + description: A timer node has up to 8 frame sub-nodes, each with the following properties. + properties: + frame-number: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 7 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: physical timer irq + - description: virtual timer irq + + reg : + minItems: 1 + maxItems: 2 + items: + - description: 1st view base address + - description: 2nd optional view base address + + required: + - frame-number + - interrupts + - reg + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + timer@f0000000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf0000000 0x1000>; + clock-frequency = <50000000>; + + frame@f0001000 { + frame-number = <0>; + interrupts = <0 13 0x8>, + <0 14 0x8>; + reg = <0xf0001000 0x1000>, + <0xf0002000 0x1000>; + }; + + frame@f0003000 { + frame-number = <1>; + interrupts = <0 15 0x8>; + reg = <0xf0003000 0x1000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.txt b/Documentation/devicetree/bindings/timer/arm,global_timer.txt deleted file mode 100644 index bdae3a818793..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,global_timer.txt +++ /dev/null @@ -1,27 +0,0 @@ - -* ARM Global Timer - Cortex-A9 are often associated with a per-core Global timer. - -** Timer node required properties: - -- compatible : should contain - * "arm,cortex-a5-global-timer" for Cortex-A5 global timers. - * "arm,cortex-a9-global-timer" for Cortex-A9 global - timers or any compatible implementation. Note: driver - supports versions r2p0 and above. - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the GT timer - register window. - -- clocks : Should be phandle to a clock. - -Example: - - timer@2c000600 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0xf01>; - clocks = <&arm_periph_clk>; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml new file mode 100644 index 000000000000..21c24a8e28fd --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,global_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Global Timer + +maintainers: + - Stuart Menefy <stuart.menefy@st.com> + +description: + Cortex-A9 are often associated with a per-core Global timer. + +properties: + compatible: + items: + - enum: + - arm,cortex-a5-global-timer + - arm,cortex-a9-global-timer + + description: driver supports versions r2p0 and above. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + timer@2c000600 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf01>; + clocks = <&arm_periph_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt index 9a6e251462e7..b8f02c663521 100644 --- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt +++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.txt @@ -5,9 +5,13 @@ Required properties: - reg : Address and length of the register set of timer controller. - interrupts : Should be the interrupt number. +Optional properties: +- clocks : Should contain a single entry describing the clock input. + Example: timer0: timer@d4014000 { compatible = "mrvl,mmp-timer"; reg = <0xd4014000 0x100>; interrupts = <13>; + clocks = <&coreclk 2>; }; diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt new file mode 100644 index 000000000000..4db542c9a0fd --- /dev/null +++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt @@ -0,0 +1,20 @@ +RDA Micro RDA8810PL Timer + +Required properties: +- compatible : "rda,8810pl-timer" +- reg : Offset and length of the register set for the device. +- interrupts : Should contain two interrupts. +- interrupt-names : Should be "hwtimer", "ostimer". + +Example: + + apb@20900000 { + compatible = "simple-bus"; + ... + timer@10000 { + compatible = "rda,8810pl-timer"; + reg = <0x10000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hwtimer", "ostimer"; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index 33992679a8bd..862a80f0380a 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -28,6 +28,10 @@ Required Properties: - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744. - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745. - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745. + - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470. + - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470. + - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1. + - "renesas,r8a774a1-cmt1" for the 48-bit CMT1 device included in r8a774a1. - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. @@ -36,6 +40,8 @@ Required Properties: - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. + - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796. + - "renesas,r8a7796-cmt1" for the 48-bit CMT1 device included in r8a7796. - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970. - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970. - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980. @@ -47,9 +53,12 @@ Required Properties: and RZ/G1. These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries listed above. - - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3. - - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3. - These are fallbacks for R-Car Gen3 entries listed above. + - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3 + and RZ/G2. + - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3 + and RZ/G2. + These are fallbacks for R-Car Gen3 and RZ/G2 entries listed + above. - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel. diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt index 16a5f4577a61..d65fdce7c7f0 100644 --- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt +++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt @@ -2,6 +2,7 @@ Rockchip rk timer Required properties: - compatible: should be: + "rockchip,rv1108-timer", "rockchip,rk3288-timer": for Rockchip RV1108 "rockchip,rk3036-timer", "rockchip,rk3288-timer": for Rockchip RK3036 "rockchip,rk3066-timer", "rockchip,rk3288-timer": for Rockchip RK3066 "rockchip,rk3188-timer", "rockchip,rk3288-timer": for Rockchip RK3188 diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt deleted file mode 100644 index 6ab001fa1ed4..000000000000 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ /dev/null @@ -1,190 +0,0 @@ -This is a list of trivial i2c devices that have simple device tree -bindings, consisting only of a compatible field, an address and -possibly an interrupt line. - -If a device needs more specific bindings, such as properties to -describe some aspect of it, there needs to be a specific binding -document for it just like any other devices. - - -Compatible Vendor / Chip -========== ============= -abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface -ad,ad7414 SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin -ad,adm9240 ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems -adi,adt7461 +/-1C TDM Extended Temp Range I.C -adt7461 +/-1C TDM Extended Temp Range I.C -adi,adt7473 +/-1C TDM Extended Temp Range I.C -adi,adt7475 +/-1C TDM Extended Temp Range I.C -adi,adt7476 +/-1C TDM Extended Temp Range I.C -adi,adt7490 +/-1C TDM Extended Temp Range I.C -adi,adxl345 Three-Axis Digital Accelerometer -adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) -ams,iaq-core AMS iAQ-Core VOC Sensor -at,24c08 i2c serial eeprom (24cxx) -atmel,at97sc3204t i2c trusted platform module (TPM) -capella,cm32181 CM32181: Ambient Light Sensor -capella,cm3232 CM3232: Ambient Light Sensor -dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output -dallas,ds1631 High-Precision Digital Thermometer -dallas,ds1672 Dallas DS1672 Real-time Clock -dallas,ds1682 Total-Elapsed-Time Recorder with Alarm -dallas,ds1775 Tiny Digital Thermometer and Thermostat -dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM -dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O -dallas,ds75 Digital Thermometer and Thermostat -devantech,srf02 Devantech SRF02 ultrasonic ranger in I2C mode -devantech,srf08 Devantech SRF08 ultrasonic ranger -devantech,srf10 Devantech SRF10 ultrasonic ranger -dlg,da9053 DA9053: flexible system level PMIC with multicore support -dlg,da9063 DA9063: system PMIC for quad-core application processors -domintech,dmard09 DMARD09: 3-axis Accelerometer -domintech,dmard10 DMARD10: 3-axis Accelerometer -epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -emmicro,em3027 EM Microelectronic EM3027 Real-time Clock -fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer -fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor -fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer -fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor -fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller -fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec -gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface -infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) -infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) -infineon,tlv493d-a1b6 Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor -isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM -isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM -isil,isl12022 Intersil ISL12022 Real-time Clock -isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor -isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor -maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator -maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs -maxim,max6621 PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion -maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface -mcube,mc3230 mCube 3-axis 8-bit digital accelerometer -memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer -microchip,mcp4017-502 Microchip 7-bit Single I2C Digital POT (5k) -microchip,mcp4017-103 Microchip 7-bit Single I2C Digital POT (10k) -microchip,mcp4017-503 Microchip 7-bit Single I2C Digital POT (50k) -microchip,mcp4017-104 Microchip 7-bit Single I2C Digital POT (100k) -microchip,mcp4018-502 Microchip 7-bit Single I2C Digital POT (5k) -microchip,mcp4018-103 Microchip 7-bit Single I2C Digital POT (10k) -microchip,mcp4018-503 Microchip 7-bit Single I2C Digital POT (50k) -microchip,mcp4018-104 Microchip 7-bit Single I2C Digital POT (100k) -microchip,mcp4019-502 Microchip 7-bit Single I2C Digital POT (5k) -microchip,mcp4019-103 Microchip 7-bit Single I2C Digital POT (10k) -microchip,mcp4019-503 Microchip 7-bit Single I2C Digital POT (50k) -microchip,mcp4019-104 Microchip 7-bit Single I2C Digital POT (100k) -microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4531-103 Microchip 7-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4531-503 Microchip 7-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4531-104 Microchip 7-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4532-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4532-103 Microchip 7-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4532-503 Microchip 7-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4532-104 Microchip 7-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4541-502 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4541-103 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4541-503 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4541-104 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4542-502 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4542-103 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4542-503 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4542-104 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4551-502 Microchip 8-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4551-103 Microchip 8-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4551-503 Microchip 8-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4551-104 Microchip 8-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4552-502 Microchip 8-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4552-103 Microchip 8-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4552-503 Microchip 8-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4552-104 Microchip 8-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4561-502 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4561-103 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4561-503 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4561-104 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4562-502 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4562-103 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4562-503 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4562-104 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4631-502 Microchip 7-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4631-103 Microchip 7-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4631-503 Microchip 7-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4631-104 Microchip 7-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4632-502 Microchip 7-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4632-103 Microchip 7-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4632-503 Microchip 7-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4632-104 Microchip 7-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4641-502 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4641-103 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4641-503 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4641-104 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4642-502 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4642-103 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4642-503 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4642-104 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4651-502 Microchip 8-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4651-103 Microchip 8-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4651-503 Microchip 8-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4651-104 Microchip 8-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4652-502 Microchip 8-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4652-103 Microchip 8-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4652-503 Microchip 8-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4652-104 Microchip 8-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4661-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4661-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4661-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4661-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4662-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4662-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,tc654 PWM Fan Speed Controller With Fan Fault Detection -microchip,tc655 PWM Fan Speed Controller With Fan Fault Detection -microcrystal,rv3029 Real Time Clock Module with I2C-Bus -miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer -miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer -miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer -national,lm63 Temperature sensor with integrated fan control -national,lm75 I2C TEMP SENSOR -national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor -national,lm85 Temperature sensor with integrated fan control -national,lm92 ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface -nuvoton,npct501 i2c trusted platform module (TPM) -nuvoton,npct601 i2c trusted platform module (TPM2) -nuvoton,w83773g Nuvoton Temperature Sensor -nxp,pca9556 Octal SMBus and I2C registered interface -nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset -nxp,pcf2127 Real-time clock -nxp,pcf2129 Real-time clock -nxp,pcf8523 Real-time Clock -nxp,pcf8563 Real-time clock/calendar -nxp,pcf85063 Tiny Real-Time Clock -oki,ml86v7667 OKI ML86V7667 video decoder -ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus -pericom,pt7c4338 Real-time Clock Module -plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch -pulsedlight,lidar-lite-v2 Pulsedlight LIDAR range-finding sensor -ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) -sgx,vz89x SGX Sensortech VZ89X Sensors -sii,s35390a 2-wire CMOS real-time clock -silabs,si7020 Relative Humidity and Temperature Sensors -skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply -st,24c256 i2c serial eeprom (24cxx) -taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface -ti,ads7828 8-Channels, 12-bit ADC -ti,ads7830 8-Channels, 8-bit ADC -ti,amc6821 Temperature Monitoring and Fan Control -ti,tsc2003 I2C Touch-Screen Controller -ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface -ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface -ti,tmp275 Digital Temperature Sensor -winbond,w83793 Winbond/Nuvoton H/W Monitor -winbond,wpct301 i2c trusted platform module (TPM) diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml new file mode 100644 index 000000000000..cc64ec63a6ad --- /dev/null +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -0,0 +1,342 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/trivial-devices.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial I2C and SPI devices that have simple device tree bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + This is a list of trivial I2C and SPI devices that have simple device tree + bindings, consisting only of a compatible field, an address and possibly an + interrupt line. + + If a device needs more specific bindings, such as properties to + describe some aspect of it, there needs to be a specific binding + document for it just like any other devices. + +properties: + reg: + maxItems: 1 + interrupts: + maxItems: 1 + compatible: + items: + - enum: + # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin + - ad,ad7414 + # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems + - ad,adm9240 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7461 + # +/-1C TDM Extended Temp Range I.C + - adt7461 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7473 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7475 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7476 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7490 + # Three-Axis Digital Accelerometer + - adi,adxl345 + # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) + - adi,adxl346 + # AMS iAQ-Core VOC Sensor + - ams,iaq-core + # i2c serial eeprom (24cxx) + - at,24c08 + # i2c trusted platform module (TPM) + - atmel,at97sc3204t + # CM32181: Ambient Light Sensor + - capella,cm32181 + # CM3232: Ambient Light Sensor + - capella,cm3232 + # High-Precision Digital Thermometer + - dallas,ds1631 + # Total-Elapsed-Time Recorder with Alarm + - dallas,ds1682 + # Tiny Digital Thermometer and Thermostat + - dallas,ds1775 + # CPU Supervisor with Nonvolatile Memory and Programmable I/O + - dallas,ds4510 + # Digital Thermometer and Thermostat + - dallas,ds75 + # Devantech SRF02 ultrasonic ranger in I2C mode + - devantech,srf02 + # Devantech SRF08 ultrasonic ranger + - devantech,srf08 + # Devantech SRF10 ultrasonic ranger + - devantech,srf10 + # DA9053: flexible system level PMIC with multicore support + - dlg,da9053 + # DA9063: system PMIC for quad-core application processors + - dlg,da9063 + # DMARD09: 3-axis Accelerometer + - domintech,dmard09 + # DMARD10: 3-axis Accelerometer + - domintech,dmard10 + # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor + - fsl,mma7660 + # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer + - fsl,mma8450 + # MPL3115: Absolute Digital Pressure Sensor + - fsl,mpl3115 + # MPR121: Proximity Capacitive Touch Sensor Controller + - fsl,mpr121 + # SGTL5000: Ultra Low-Power Audio Codec + - fsl,sgtl5000 + # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface + - gmt,g751 + # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) + - infineon,slb9635tt + # Infineon SLB9645 I2C TPM (new protocol, max 400khz) + - infineon,slb9645tt + # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor + - infineon,tlv493d-a1b6 + # Intersil ISL29028 Ambient Light and Proximity Sensor + - isil,isl29028 + # Intersil ISL29030 Ambient Light and Proximity Sensor + - isil,isl29030 + # 5 Bit Programmable, Pulse-Width Modulator + - maxim,ds1050 + # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs + - maxim,max1237 + # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion + - maxim,max6621 + # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface + - maxim,max6625 + # mCube 3-axis 8-bit digital accelerometer + - mcube,mc3230 + # MEMSIC 2-axis 8-bit digital accelerometer + - memsic,mxc6225 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4017-502 + # Microchip 7-bit Single I2C Digital POT (10k) + - microchip,mcp4017-103 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4017-503 + # Microchip 7-bit Single I2C Digital POT (100k) + - microchip,mcp4017-104 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4018-502 + # Microchip 7-bit Single I2C Digital POT (10k) + - microchip,mcp4018-103 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4018-503 + # Microchip 7-bit Single I2C Digital POT (100k) + - microchip,mcp4018-104 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4019-502 + # Microchip 7-bit Single I2C Digital POT (10k) + - microchip,mcp4019-103 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4019-503 + # Microchip 7-bit Single I2C Digital POT (100k) + - microchip,mcp4019-104 + # Microchip 7-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4531-502 + # Microchip 7-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4531-103 + # Microchip 7-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4531-503 + # Microchip 7-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4531-104 + # Microchip 7-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4532-502 + # Microchip 7-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4532-103 + # Microchip 7-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4532-503 + # Microchip 7-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4532-104 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4541-502 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4541-103 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4541-503 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4541-104 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4542-502 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4542-103 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4542-503 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4542-104 + # Microchip 8-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4551-502 + # Microchip 8-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4551-103 + # Microchip 8-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4551-503 + # Microchip 8-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4551-104 + # Microchip 8-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4552-502 + # Microchip 8-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4552-103 + # Microchip 8-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4552-503 + # Microchip 8-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4552-104 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4561-502 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4561-103 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4561-503 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4561-104 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4562-502 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4562-103 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4562-503 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4562-104 + # Microchip 7-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4631-502 + # Microchip 7-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4631-103 + # Microchip 7-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4631-503 + # Microchip 7-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4631-104 + # Microchip 7-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4632-502 + # Microchip 7-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4632-103 + # Microchip 7-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4632-503 + # Microchip 7-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4632-104 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4641-502 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4641-103 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4641-503 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4641-104 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4642-502 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4642-103 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4642-503 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4642-104 + # Microchip 8-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4651-502 + # Microchip 8-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4651-103 + # Microchip 8-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4651-503 + # Microchip 8-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4651-104 + # Microchip 8-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4652-502 + # Microchip 8-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4652-103 + # Microchip 8-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4652-503 + # Microchip 8-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4652-104 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4661-502 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4661-103 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4661-503 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4661-104 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4662-502 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4662-103 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4662-503 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4662-104 + # PWM Fan Speed Controller With Fan Fault Detection + - microchip,tc654 + # PWM Fan Speed Controller With Fan Fault Detection + - microchip,tc655 + # MiraMEMS DA226 2-axis 14-bit digital accelerometer + - miramems,da226 + # MiraMEMS DA280 3-axis 14-bit digital accelerometer + - miramems,da280 + # MiraMEMS DA311 3-axis 12-bit digital accelerometer + - miramems,da311 + # Temperature sensor with integrated fan control + - national,lm63 + # I2C TEMP SENSOR + - national,lm75 + # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor + - national,lm80 + # Temperature sensor with integrated fan control + - national,lm85 + # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface + - national,lm92 + # i2c trusted platform module (TPM) + - nuvoton,npct501 + # i2c trusted platform module (TPM2) + - nuvoton,npct601 + # Nuvoton Temperature Sensor + - nuvoton,w83773g + # Octal SMBus and I2C registered interface + - nxp,pca9556 + # 8-bit I2C-bus and SMBus I/O port with reset + - nxp,pca9557 + # OKI ML86V7667 video decoder + - oki,ml86v7667 + # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus + - ovti,ov5642 + # 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch + - plx,pex8648 + # Pulsedlight LIDAR range-finding sensor + - pulsedlight,lidar-lite-v2 + # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) + - samsung,24ad0xd1 + # SGX Sensortech VZ89X Sensors + - sgx,vz89x + # Relative Humidity and Temperature Sensors + - silabs,si7020 + # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply + - skyworks,sky81452 + # i2c serial eeprom (24cxx) + - st,24c256 + # Ambient Light Sensor with SMBUS/Two Wire Serial Interface + - taos,tsl2550 + # 8-Channels, 12-bit ADC + - ti,ads7828 + # 8-Channels, 8-bit ADC + - ti,ads7830 + # Temperature Monitoring and Fan Control + - ti,amc6821 + # I2C Touch-Screen Controller + - ti,tsc2003 + # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface + - ti,tmp102 + # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface + - ti,tmp103 + # Digital Temperature Sensor + - ti,tmp275 + # Winbond/Nuvoton H/W Monitor + - winbond,w83793 + # i2c trusted platform module (TPM) + - winbond,wpct301 + +required: + - compatible + - reg + +... diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt new file mode 100644 index 000000000000..a04a4989ec7f --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt @@ -0,0 +1,31 @@ +* Cadence Universal Flash Storage (UFS) Controller + +UFS nodes are defined to describe on-chip UFS host controllers. +Each UFS controller instance should have its own node. +Please see the ufshcd-pltfrm.txt for a list of all available properties. + +Required properties: +- compatible : Compatible list, contains the following controller: + "cdns,ufshc" + complemented with the JEDEC version: + "jedec,ufs-2.0" + +- reg : Address and length of the UFS register set. +- interrupts : One interrupt mapping. +- freq-table-hz : Clock frequency table. + See the ufshcd-pltfrm.txt for details. +- clocks : List of phandle and clock specifier pairs. +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. "core_clk" is mandatory. + Depending on a type of a PHY, + the "phy_clk" clock can also be added, if needed. + +Example: + ufs@fd030000 { + compatible = "cdns,ufshc", "jedec,ufs-2.0"; + reg = <0xfd030000 0x10000>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; + freq-table-hz = <0 0>, <0 0>; + clocks = <&ufs_core_clk>, <&ufs_phy_clk>; + clock-names = "core_clk", "phy_clk"; + }; diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 2df00524bd21..8cf59452c675 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -33,6 +33,12 @@ Optional properties: - clocks : List of phandle and clock specifier pairs - clock-names : List of clock input name strings sorted in the same order as the clocks property. + "ref_clk" indicates reference clock frequency. + UFS host supplies reference clock to UFS device and UFS device + specification allows host to provide one of the 4 frequencies (19.2 MHz, + 26 MHz, 38.4 MHz, 52MHz) for reference clock. This "ref_clk" entry is + parsed and used to update the reference clock setting in device. + Defaults to 26 MHz(as per specification) if not specified by host. - freq-table-hz : Array of <min max> operating frequencies stored in the same order as the clocks property. If this property is not defined or a value in the array is "0" then it is assumed diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 529e51879fb2..adae82385dd6 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -80,15 +80,19 @@ Optional properties: controller. It's expected that a mux state of 0 indicates device mode and a mux state of 1 indicates host mode. - mux-control-names: Shall be "usb_switch" if mux-controls is specified. -- pinctrl-names: Names for optional pin modes in "default", "host", "device" +- pinctrl-names: Names for optional pin modes in "default", "host", "device". + In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this + case, the "idle" state needs to pull down the data and strobe pin + and the "active" state needs to pull up the strobe pin. - pinctrl-n: alternate pin modes i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one argument that indicate usb controller index - disable-over-current: disable over current detect -- over-current-active-high: over current signal polarity is high active, - typically over current signal polarity is low active. +- over-current-active-low: over current signal polarity is active low. +- over-current-active-high: over current signal polarity is active high. + It's recommended to specify the over current polarity. - external-vbus-divider: enables off-chip resistor divider for Vbus Example: @@ -111,3 +115,29 @@ Example: mux-controls = <&usb_switch>; mux-control-names = "usb_switch"; }; + +Example for HSIC: + + usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: smsc@1 { + compatible = "usb424,9730"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 636630fb92d7..8e5265e9f658 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -37,7 +37,11 @@ Optional properties: - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - resets: a single pair of phandle and reset specifier + - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable + - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command + failure SW work-around for DWC_usb31 version 1.70a-ea06 + and prior. - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt index 3eee9e505400..4156c3e181c5 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt @@ -59,6 +59,14 @@ For Tegra210: - avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. - dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. - hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. +- power-domains: A list of PM domain specifiers that reference each power-domain + used by the xHCI controller. This list must comprise of a specifier for the + XUSBA and XUSBC power-domains. See ../power/power_domain.txt and + ../arm/tegra/nvidia,tegra20-pmc.txt for details. +- power-domain-names: A list of names that represent each of the specifiers in + the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which + represent the power-domains XUSBA and XUSBC, respectively. See + ../power/power_domain.txt for details. Optional properties: -------------------- diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 4b1a2a8fcc16..3bbe3b87a1ff 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -67,6 +67,7 @@ capella Capella Microsystems, Inc cascoda Cascoda, Ltd. cavium Cavium, Inc. cdns Cadence Design Systems Inc. +cdtech CDTech(H.K.) Electronics Limited ceva Ceva, Inc. chipidea Chipidea, Inc chipone ChipOne @@ -113,6 +114,7 @@ edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. embest Shenzhen Embest Technology Co., Ltd. +emlid Emlid, Ltd. emmicro EM Microelectronic emtrion emtrion GmbH endless Endless Mobile, Inc. @@ -170,6 +172,7 @@ holtek Holtek Semiconductor, Inc. hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) +icplus IC Plus Corp. idt Integrated Device Technologies, Inc. ifi Ingenieurburo Fur Ic-Technologie (I/F/I) ilitek ILI Technology Corporation (ILITEK) @@ -296,6 +299,7 @@ panasonic Panasonic Corporation parade Parade Technologies Inc. pericom Pericom Technology Inc. pervasive Pervasive Displays, Inc. +phicomm PHICOMM Co., Ltd. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd pine64 Pine64 @@ -303,6 +307,7 @@ pixcir PIXCIR MICROELECTRONICS Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA plx Broadcom Corporation (formerly PLX Technology) +pni PNI Sensor Corporation portwell Portwell Inc. poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) @@ -415,6 +420,7 @@ vamrs Vamrs Ltd. variscite Variscite Ltd. via VIA Technologies, Inc. virtio Virtual I/O Device Specification, developed by the OASIS consortium +vishay Vishay Intertechnology, Inc vitesse Vitesse Semiconductor Corporation vivante Vivante Corporation vocore VoCore Studio diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 859dee167b91..8682d6a93e5b 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -8,6 +8,7 @@ Required properties: "mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797 "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622 "mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623 + "mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629 - reg : Specifies base physical address and size of the registers. diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt new file mode 100644 index 000000000000..6fb984f31982 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt @@ -0,0 +1,28 @@ +QCOM PM8916 watchdog timer controller + +This pm8916 watchdog timer controller must be under pm8916-pon node. + +Required properties: +- compatible: should be "qcom,pm8916-wdt" + +Optional properties : +- interrupts : Watchdog pre-timeout (bark) interrupt. +- timeout-sec : Watchdog timeout value in seconds. + +Example: + + pm8916_0: pm8916@0 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + + watchdog { + compatible = "qcom,pm8916-wdt"; + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; + timeout-sec = <10>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt index a8ee29fd9ac8..ef2b97b72e08 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt @@ -9,6 +9,7 @@ Required properties: - "renesas,r8a7744-wdt" (RZ/G1N) - "renesas,r8a7745-wdt" (RZ/G1E) - "renesas,r8a774a1-wdt" (RZ/G2M) + - "renesas,r8a774c0-wdt" (RZ/G2E) - "renesas,r8a7790-wdt" (R-Car H2) - "renesas,r8a7791-wdt" (R-Car M2-W) - "renesas,r8a7792-wdt" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index ed11ce0ac836..46055254e8dd 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -6,6 +6,7 @@ Required properties: "allwinner,sun4i-a10-wdt" "allwinner,sun6i-a31-wdt" "allwinner,sun50i-a64-wdt","allwinner,sun6i-a31-wdt" + "allwinner,suniv-f1c100s-wdt", "allwinner,sun4i-a10-wdt" - reg : Specifies base physical address and size of the registers. Optional properties: diff --git a/Documentation/devicetree/todo.txt b/Documentation/devicetree/todo.txt deleted file mode 100644 index b5139d1de811..000000000000 --- a/Documentation/devicetree/todo.txt +++ /dev/null @@ -1,10 +0,0 @@ -Todo list for devicetree: - -=== General structure === -- Switch from custom lists to (h)list_head for nodes and properties structure - -=== CONFIG_OF_DYNAMIC === -- Switch to RCU for tree updates and get rid of global spinlock -- Document node lifecycle for CONFIG_OF_DYNAMIC -- Always set ->full_name at of_attach_node() time -- pseries: Get rid of open-coded tree modification from arch/powerpc/platforms/pseries/dlpar.c diff --git a/Documentation/devicetree/writing-schema.md b/Documentation/devicetree/writing-schema.md new file mode 100644 index 000000000000..a3652d33a48f --- /dev/null +++ b/Documentation/devicetree/writing-schema.md @@ -0,0 +1,130 @@ +# Writing DeviceTree Bindings in json-schema + +Devicetree bindings are written using json-schema vocabulary. Schema files are +written in a JSON compatible subset of YAML. YAML is used instead of JSON as it +considered more human readable and has some advantages such as allowing +comments (Prefixed with '#'). + +## Schema Contents + +Each schema doc is a structured json-schema which is defined by a set of +top-level properties. Generally, there is one binding defined per file. The +top-level json-schema properties used are: + +- __$id__ - A json-schema unique identifier string. The string must be a valid +URI typically containing the binding's filename and path. For DT schema, it must +begin with "http://devicetree.org/schemas/". The URL is used in constructing +references to other files specified in schema "$ref" properties. A $ref values +with a leading '/' will have the hostname prepended. A $ref value a relative +path or filename only will be prepended with the hostname and path components +of the current schema file's '$id' value. A URL is used even for local files, +but there may not actually be files present at those locations. + +- __$schema__ - Indicates the meta-schema the schema file adheres to. + +- __title__ - A one line description on the contents of the binding schema. + +- __maintainers__ - A DT specific property. Contains a list of email address(es) +for maintainers of this binding. + +- __description__ - Optional. A multi-line text block containing any detailed +information about this binding. It should contain things such as what the block +or device does, standards the device conforms to, and links to datasheets for +more information. + +- __select__ - Optional. A json-schema used to match nodes for applying the +schema. By default without 'select', nodes are matched against their possible +compatible string values or node name. Most bindings should not need select. + +- __allOf__ - Optional. A list of other schemas to include. This is used to +include other schemas the binding conforms to. This may be schemas for a +particular class of devices such as I2C or SPI controllers. + +- __properties__ - A set of sub-schema defining all the DT properties for the +binding. The exact schema syntax depends on whether properties are known, +common properties (e.g. 'interrupts') or are binding/vendor specific properties. + + A property can also define a child DT node with child properties defined +under it. + + For more details on properties sections, see 'Property Schema' section. + +- __patternProperties__ - Optional. Similar to 'properties', but names are regex. + +- __required__ - A list of DT properties from the 'properties' section that +must always be present. + +- __examples__ - Optional. A list of one or more DTS hunks implementing the +binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead. + +Unless noted otherwise, all properties are required. + +## Property Schema + +The 'properties' section of the schema contains all the DT properties for a +binding. Each property contains a set of constraints using json-schema +vocabulary for that property. The properties schemas are what is used for +validation of DT files. + +For common properties, only additional constraints not covered by the common +binding schema need to be defined such as how many values are valid or what +possible values are valid. + +Vendor specific properties will typically need more detailed schema. With the +exception of boolean properties, they should have a reference to a type in +schemas/types.yaml. A "description" property is always required. + +The Devicetree schemas don't exactly match the YAML encoded DT data produced by +dtc. They are simplified to make them more compact and avoid a bunch of +boilerplate. The tools process the schema files to produce the final schema for +validation. There are currently 2 transformations the tools perform. + +The default for arrays in json-schema is they are variable sized and allow more +entries than explicitly defined. This can be restricted by defining 'minItems', +'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed +size is desired in most cases, so these properties are added based on the +number of entries in an 'items' list. + +The YAML Devicetree format also makes all string values an array and scalar +values a matrix (in order to define groupings) even when only a single value +is present. Single entries in schemas are fixed up to match this encoding. + +## Testing + +### Dependencies + +The DT schema project must be installed in order to validate the DT schema +binding documents and validate DTS files using the DT schema. The DT schema +project can be installed with pip: + +`pip3 install git+https://github.com/robherring/yaml-bindings.git@master` + +dtc must also be built with YAML output support enabled. This requires that +libyaml and its headers be installed on the host system. + +### Running checks + +The DT schema binding documents must be validated using the meta-schema (the +schema for the schema) to ensure they are both valid json-schema and valid +binding schema. All of the DT binding documents can be validated using the +`dt_binding_check` target: + +`make dt_binding_check` + +In order to perform validation of DT source files, use the `dtbs_check` target: + +`make dtbs_check` + +This will first run the `dt_binding_check` which generates the processed schema. + +It is also possible to run checks with a single schema file by setting the +'DT_SCHEMA_FILES' variable to a specific schema file. + +`make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml` + + +## json-schema Resources + +[JSON-Schema Specifications](http://json-schema.org/) + +[Using JSON Schema Book](http://usingjsonschema.com/) diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index 8db53cdc225f..51be62aa4385 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -77,7 +77,7 @@ The general format of a function and function-like macro kernel-doc comment is:: * Context: Describes whether the function can sleep, what locks it takes, * releases, or expects to be held. It can extend over multiple * lines. - * Return: Describe the return value of foobar. + * Return: Describe the return value of function_name. * * The return value description can also have multiple paragraphs, and should * be placed at the end of the comment block. diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst index f0796daa95b4..02605ee1d876 100644 --- a/Documentation/doc-guide/sphinx.rst +++ b/Documentation/doc-guide/sphinx.rst @@ -1,3 +1,5 @@ +.. _sphinxdoc: + Introduction ============ diff --git a/Documentation/driver-api/dmaengine/dmatest.rst b/Documentation/driver-api/dmaengine/dmatest.rst index dd5263a19c7b..8d81f1a7169b 100644 --- a/Documentation/driver-api/dmaengine/dmatest.rst +++ b/Documentation/driver-api/dmaengine/dmatest.rst @@ -11,6 +11,10 @@ This small document introduces how to test DMA drivers using dmatest module. capability of the following: DMA_MEMCPY (memory-to-memory), DMA_MEMSET (const-to-memory or memory-to-memory, when emulated), DMA_XOR, DMA_PQ. +.. note:: + In case of any related questions use the official mailing list + dmaengine@vger.kernel.org. + Part 1 - How to build the test module ===================================== diff --git a/Documentation/driver-api/firmware/other_interfaces.rst b/Documentation/driver-api/firmware/other_interfaces.rst index 36c47b1e9824..a4ac54b5fd79 100644 --- a/Documentation/driver-api/firmware/other_interfaces.rst +++ b/Documentation/driver-api/firmware/other_interfaces.rst @@ -13,3 +13,33 @@ EDD Interfaces .. kernel-doc:: drivers/firmware/edd.c :internal: +Intel Stratix10 SoC Service Layer +--------------------------------- +Some features of the Intel Stratix10 SoC require a level of privilege +higher than the kernel is granted. Such secure features include +FPGA programming. In terms of the ARMv8 architecture, the kernel runs +at Exception Level 1 (EL1), access to the features requires +Exception Level 3 (EL3). + +The Intel Stratix10 SoC service layer provides an in kernel API for +drivers to request access to the secure features. The requests are queued +and processed one by one. ARM’s SMCCC is used to pass the execution +of the requests on to a secure monitor (EL3). + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_command_code + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_client_msg + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_command_reconfig_payload + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_cb_data + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_client + +.. kernel-doc:: drivers/firmware/stratix10-svc.c + :export: diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst index a6c14ff0c54f..a92d8837b62b 100644 --- a/Documentation/driver-api/gpio/driver.rst +++ b/Documentation/driver-api/gpio/driver.rst @@ -434,7 +434,9 @@ try_module_get()). A GPIO driver can use the following functions instead to request and free descriptors without being pinned to the kernel forever:: struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc, - const char *label) + u16 hwnum, + const char *label, + enum gpiod_flags flags) void gpiochip_free_own_desc(struct gpio_desc *desc) diff --git a/Documentation/driver-api/i3c/device-driver-api.rst b/Documentation/driver-api/i3c/device-driver-api.rst new file mode 100644 index 000000000000..85bc3381cd3e --- /dev/null +++ b/Documentation/driver-api/i3c/device-driver-api.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +I3C device driver API +===================== + +.. kernel-doc:: include/linux/i3c/device.h + +.. kernel-doc:: drivers/i3c/device.c diff --git a/Documentation/driver-api/i3c/index.rst b/Documentation/driver-api/i3c/index.rst new file mode 100644 index 000000000000..783d6dad054b --- /dev/null +++ b/Documentation/driver-api/i3c/index.rst @@ -0,0 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +I3C subsystem +============= + +.. toctree:: + + protocol + device-driver-api + master-driver-api diff --git a/Documentation/driver-api/i3c/master-driver-api.rst b/Documentation/driver-api/i3c/master-driver-api.rst new file mode 100644 index 000000000000..332552b28358 --- /dev/null +++ b/Documentation/driver-api/i3c/master-driver-api.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +I3C master controller driver API +================================ + +.. kernel-doc:: drivers/i3c/master.c + +.. kernel-doc:: include/linux/i3c/master.h diff --git a/Documentation/driver-api/i3c/protocol.rst b/Documentation/driver-api/i3c/protocol.rst new file mode 100644 index 000000000000..dae3b6d32c6b --- /dev/null +++ b/Documentation/driver-api/i3c/protocol.rst @@ -0,0 +1,203 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +I3C protocol +============ + +Disclaimer +========== + +This chapter will focus on aspects that matter to software developers. For +everything hardware related (like how things are transmitted on the bus, how +collisions are prevented, ...) please have a look at the I3C specification. + +This document is just a brief introduction to the I3C protocol and the concepts +it brings to the table. If you need more information, please refer to the MIPI +I3C specification (can be downloaded here +http://resources.mipi.org/mipi-i3c-v1-download). + +Introduction +============ + +The I3C (pronounced 'eye-three-see') is a MIPI standardized protocol designed +to overcome I2C limitations (limited speed, external signals needed for +interrupts, no automatic detection of the devices connected to the bus, ...) +while remaining power-efficient. + +I3C Bus +======= + +An I3C bus is made of several I3C devices and possibly some I2C devices as +well, but let's focus on I3C devices for now. + +An I3C device on the I3C bus can have one of the following roles: + +* Master: the device is driving the bus. It's the one in charge of initiating + transactions or deciding who is allowed to talk on the bus (slave generated + events are possible in I3C, see below). +* Slave: the device acts as a slave, and is not able to send frames to another + slave on the bus. The device can still send events to the master on + its own initiative if the master allowed it. + +I3C is a multi-master protocol, so there might be several masters on a bus, +though only one device can act as a master at a given time. In order to gain +bus ownership, a master has to follow a specific procedure. + +Each device on the I3C bus has to be assigned a dynamic address to be able to +communicate. Until this is done, the device should only respond to a limited +set of commands. If it has a static address (also called legacy I2C address), +the device can reply to I2C transfers. + +In addition to these per-device addresses, the protocol defines a broadcast +address in order to address all devices on the bus. + +Once a dynamic address has been assigned to a device, this address will be used +for any direct communication with the device. Note that even after being +assigned a dynamic address, the device should still process broadcast messages. + +I3C Device discovery +==================== + +The I3C protocol defines a mechanism to automatically discover devices present +on the bus, their capabilities and the functionalities they provide. In this +regard I3C is closer to a discoverable bus like USB than it is to I2C or SPI. + +The discovery mechanism is called DAA (Dynamic Address Assignment), because it +not only discovers devices but also assigns them a dynamic address. + +During DAA, each I3C device reports 3 important things: + +* BCR: Bus Characteristic Register. This 8-bit register describes the device bus + related capabilities +* DCR: Device Characteristic Register. This 8-bit register describes the + functionalities provided by the device +* Provisional ID: A 48-bit unique identifier. On a given bus there should be no + Provisional ID collision, otherwise the discovery mechanism may fail. + +I3C slave events +================ + +The I3C protocol allows slaves to generate events on their own, and thus allows +them to take temporary control of the bus. + +This mechanism is called IBI for In Band Interrupts, and as stated in the name, +it allows devices to generate interrupts without requiring an external signal. + +During DAA, each device on the bus has been assigned an address, and this +address will serve as a priority identifier to determine who wins if 2 different +devices are generating an interrupt at the same moment on the bus (the lower the +dynamic address the higher the priority). + +Masters are allowed to inhibit interrupts if they want to. This inhibition +request can be broadcast (applies to all devices) or sent to a specific +device. + +I3C Hot-Join +============ + +The Hot-Join mechanism is similar to USB hotplug. This mechanism allows +slaves to join the bus after it has been initialized by the master. + +This covers the following use cases: + +* the device is not powered when the bus is probed +* the device is hotplugged on the bus through an extension board + +This mechanism is relying on slave events to inform the master that a new +device joined the bus and is waiting for a dynamic address. + +The master is then free to address the request as it wishes: ignore it or +assign a dynamic address to the slave. + +I3C transfer types +================== + +If you omit SMBus (which is just a standardization on how to access registers +exposed by I2C devices), I2C has only one transfer type. + +I3C defines 3 different classes of transfer in addition to I2C transfers which +are here for backward compatibility with I2C devices. + +I3C CCC commands +---------------- + +CCC (Common Command Code) commands are meant to be used for anything that is +related to bus management and all features that are common to a set of devices. + +CCC commands contain an 8-bit CCC ID describing the command that is executed. +The MSB of this ID specifies whether this is a broadcast command (bit7 = 0) or a +unicast one (bit7 = 1). + +The command ID can be followed by a payload. Depending on the command, this +payload is either sent by the master sending the command (write CCC command), +or sent by the slave receiving the command (read CCC command). Of course, read +accesses only apply to unicast commands. +Note that, when sending a CCC command to a specific device, the device address +is passed in the first byte of the payload. + +The payload length is not explicitly passed on the bus, and should be extracted +from the CCC ID. + +Note that vendors can use a dedicated range of CCC IDs for their own commands +(0x61-0x7f and 0xe0-0xef). + +I3C Private SDR transfers +------------------------- + +Private SDR (Single Data Rate) transfers should be used for anything that is +device specific and does not require high transfer speed. + +It is the equivalent of I2C transfers but in the I3C world. Each transfer is +passed the device address (dynamic address assigned during DAA), a payload +and a direction. + +The only difference with I2C is that the transfer is much faster (typical clock +frequency is 12.5MHz). + +I3C HDR commands +---------------- + +HDR commands should be used for anything that is device specific and requires +high transfer speed. + +The first thing attached to an HDR command is the HDR mode. There are currently +3 different modes defined by the I3C specification (refer to the specification +for more details): + +* HDR-DDR: Double Data Rate mode +* HDR-TSP: Ternary Symbol Pure. Only usable on busses with no I2C devices +* HDR-TSL: Ternary Symbol Legacy. Usable on busses with I2C devices + +When sending an HDR command, the whole bus has to enter HDR mode, which is done +using a broadcast CCC command. +Once the bus has entered a specific HDR mode, the master sends the HDR command. +An HDR command is made of: + +* one 16-bits command word in big endian +* N 16-bits data words in big endian + +Those words may be wrapped with specific preambles/post-ambles which depend on +the chosen HDR mode and are detailed here (see the specification for more +details). + +The 16-bits command word is made of: + +* bit[15]: direction bit, read is 1, write is 0 +* bit[14:8]: command code. Identifies the command being executed, the amount of + data words and their meaning +* bit[7:1]: I3C address of the device this command is addressed to +* bit[0]: reserved/parity-bit + +Backward compatibility with I2C devices +======================================= + +The I3C protocol has been designed to be backward compatible with I2C devices. +This backward compatibility allows one to connect a mix of I2C and I3C devices +on the same bus, though, in order to be really efficient, I2C devices should +be equipped with 50 ns spike filters. + +I2C devices can't be discovered like I3C ones and have to be statically +declared. In order to let the master know what these devices are capable of +(both in terms of bus related limitations and functionalities), the software +has to provide some information, which is done through the LVR (Legacy I2C +Virtual Register). diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 909f991b4c0d..ab38ced66a44 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -33,6 +33,7 @@ available subsections can be seen below. pci/index spi i2c + i3c/index hsi edac scsi diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst index 1128705a5731..090c151aa86b 100644 --- a/Documentation/driver-api/pm/devices.rst +++ b/Documentation/driver-api/pm/devices.rst @@ -6,6 +6,8 @@ .. |struct wakeup_source| replace:: :c:type:`struct wakeup_source <wakeup_source>` .. |struct device| replace:: :c:type:`struct device <device>` +.. _driverapi_pm_devices: + ============================== Device Power Management Basics ============================== diff --git a/Documentation/driver-api/usb/index.rst b/Documentation/driver-api/usb/index.rst index 8fe995a1ec94..cfa8797ea614 100644 --- a/Documentation/driver-api/usb/index.rst +++ b/Documentation/driver-api/usb/index.rst @@ -19,6 +19,7 @@ Linux USB API dwc3 writing_musb_glue_layer typec + typec_bus usb3-debug-port .. only:: subproject and html diff --git a/Documentation/driver-api/usb/typec.rst b/Documentation/driver-api/usb/typec.rst index 48ff58095f11..201163d8c13e 100644 --- a/Documentation/driver-api/usb/typec.rst +++ b/Documentation/driver-api/usb/typec.rst @@ -1,3 +1,4 @@ +.. _typec: USB Type-C connector class ========================== diff --git a/Documentation/driver-api/usb/typec_bus.rst b/Documentation/driver-api/usb/typec_bus.rst index d5eec1715b5b..f47a69bff498 100644 --- a/Documentation/driver-api/usb/typec_bus.rst +++ b/Documentation/driver-api/usb/typec_bus.rst @@ -13,10 +13,10 @@ every alternate mode, so every alternate mode will need a custom driver. USB Type-C bus allows binding a driver to the discovered partner alternate modes by using the SVID and the mode number. -USB Type-C Connector Class provides a device for every alternate mode a port -supports, and separate device for every alternate mode the partner supports. -The drivers for the alternate modes are bound to the partner alternate mode -devices, and the port alternate mode devices must be handled by the port +:ref:`USB Type-C Connector Class <typec>` provides a device for every alternate +mode a port supports, and separate device for every alternate mode the partner +supports. The drivers for the alternate modes are bound to the partner alternate +mode devices, and the port alternate mode devices must be handled by the port drivers. When a new partner alternate mode device is registered, it is linked to the @@ -46,7 +46,7 @@ enter any modes on their own. ``->vdm`` is the most important callback in the operation callbacks vector. It will be used to deliver all the SVID specific commands from the partner to the alternate mode driver, and vice versa in case of port drivers. The drivers send -the SVID specific commands to each other using :c:func:`typec_altmode_vmd()`. +the SVID specific commands to each other using :c:func:`typec_altmode_vdm()`. If the communication with the partner using the SVID specific commands results in need to reconfigure the pins on the connector, the alternate mode driver @@ -67,15 +67,15 @@ Type-C Specification, and also put the connector back to ``TYPEC_STATE_USB`` after the mode has been exited. An example of working definitions for SVID specific pin configurations would -look like this: +look like this:: -enum { - ALTMODEX_CONF_A = TYPEC_STATE_MODAL, - ALTMODEX_CONF_B, - ... -}; + enum { + ALTMODEX_CONF_A = TYPEC_STATE_MODAL, + ALTMODEX_CONF_B, + ... + }; -Helper macro ``TYPEC_MODAL_STATE()`` can also be used: +Helper macro ``TYPEC_MODAL_STATE()`` can also be used:: #define ALTMODEX_CONF_A = TYPEC_MODAL_STATE(0); #define ALTMODEX_CONF_B = TYPEC_MODAL_STATE(1); diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 43681ca0837f..841c99529d27 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -132,6 +132,13 @@ devres. Complexity is shifted from less maintained low level drivers to better maintained higher layer. Also, as init failure path is shared with exit path, both can get more testing. +Note though that when converting current calls or assignments to +managed devm_* versions it is up to you to check if internal operations +like allocating memory, have failed. Managed resources pertains to the +freeing of these resources *only* - all other checks needed are still +on you. In some cases this may mean introducing checks that were not +necessary before moving to the managed devm_* calls. + 3. Devres group --------------- @@ -254,8 +261,8 @@ GPIO devm_gpiod_get_index_optional() devm_gpiod_get_optional() devm_gpiod_put() + devm_gpiod_unhinge() devm_gpiochip_add_data() - devm_gpiochip_remove() devm_gpio_request() devm_gpio_request_one() devm_gpio_free() diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README index 1e1057958dd3..955d667dc87e 100644 --- a/Documentation/early-userspace/README +++ b/Documentation/early-userspace/README @@ -52,7 +52,7 @@ user root (0). INITRAMFS_ROOT_GID can be set to a group ID that needs to be mapped to group root (0). A source file must be directives in the format required by the -usr/gen_init_cpio utility (run 'usr/gen_init_cpio --help' to get the +usr/gen_init_cpio utility (run 'usr/gen_init_cpio -h' to get the file format). The directives in the file will be passed directly to usr/gen_init_cpio. diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 27cbd63abfd2..60111395f932 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -29,5 +29,5 @@ | um: | TODO | | unicore32: | TODO | | x86: | ok | - | xtensa: | TODO | + | xtensa: | ok | ----------------------- diff --git a/Documentation/features/io/sg-chain/arch-support.txt b/Documentation/features/io/sg-chain/arch-support.txt deleted file mode 100644 index 6554f0372c3f..000000000000 --- a/Documentation/features/io/sg-chain/arch-support.txt +++ /dev/null @@ -1,33 +0,0 @@ -# -# Feature name: sg-chain -# Kconfig: ARCH_HAS_SG_CHAIN -# description: arch supports chained scatter-gather lists -# - ----------------------- - | arch |status| - ----------------------- - | alpha: | TODO | - | arc: | ok | - | arm: | ok | - | arm64: | ok | - | c6x: | TODO | - | h8300: | TODO | - | hexagon: | TODO | - | ia64: | ok | - | m68k: | TODO | - | microblaze: | TODO | - | mips: | TODO | - | nds32: | TODO | - | nios2: | TODO | - | openrisc: | TODO | - | parisc: | TODO | - | powerpc: | ok | - | riscv: | TODO | - | s390: | ok | - | sh: | TODO | - | sparc: | ok | - | um: | TODO | - | unicore32: | TODO | - | x86: | ok | - | xtensa: | TODO | - ----------------------- diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 8527601a3739..326e4797bc65 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -16,7 +16,7 @@ | ia64: | TODO | | m68k: | TODO | | microblaze: | TODO | - | mips: | TODO | + | mips: | ok | | nds32: | TODO | | nios2: | TODO | | openrisc: | TODO | diff --git a/Documentation/filesystems/caching/backend-api.txt b/Documentation/filesystems/caching/backend-api.txt index c0bd5677271b..c418280c915f 100644 --- a/Documentation/filesystems/caching/backend-api.txt +++ b/Documentation/filesystems/caching/backend-api.txt @@ -704,7 +704,7 @@ FS-Cache provides some utilities that a cache backend may make use of: void fscache_get_retrieval(struct fscache_retrieval *op); void fscache_put_retrieval(struct fscache_retrieval *op); - These two functions are used to retain a retrieval record whilst doing + These two functions are used to retain a retrieval record while doing asynchronous data retrieval and block allocation. diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt index 748a1ae49e12..28aefcbb1442 100644 --- a/Documentation/filesystems/caching/cachefiles.txt +++ b/Documentation/filesystems/caching/cachefiles.txt @@ -45,7 +45,7 @@ filesystems are very specific in nature. CacheFiles creates a misc character device - "/dev/cachefiles" - that is used to communication with the daemon. Only one thing may have this open at once, -and whilst it is open, a cache is at least partially in existence. The daemon +and while it is open, a cache is at least partially in existence. The daemon opens this and sends commands down it to control the cache. CacheFiles is currently limited to a single cache. @@ -163,7 +163,7 @@ Do not mount other things within the cache as this will cause problems. The kernel module contains its own very cut-down path walking facility that ignores mountpoints, but the daemon can't avoid them. -Do not create, rename or unlink files and directories in the cache whilst the +Do not create, rename or unlink files and directories in the cache while the cache is active, as this may cause the state to become uncertain. Renaming files in the cache might make objects appear to be other objects (the diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index 2a6f7399c1f3..ba968e8f5704 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -382,7 +382,7 @@ MISCELLANEOUS OBJECT REGISTRATION An optional step is to request an object of miscellaneous type be created in the cache. This is almost identical to index cookie acquisition. The only difference is that the type in the object definition should be something other -than index type. Whilst the parent object could be an index, it's more likely +than index type. While the parent object could be an index, it's more likely it would be some other type of object such as a data file. xattr->cache = diff --git a/Documentation/filesystems/caching/operations.txt b/Documentation/filesystems/caching/operations.txt index a1c052cbba35..d8976c434718 100644 --- a/Documentation/filesystems/caching/operations.txt +++ b/Documentation/filesystems/caching/operations.txt @@ -171,7 +171,7 @@ Operations are used through the following procedure: (3) If the submitting thread wants to do the work itself, and has marked the operation with FSCACHE_OP_MYTHREAD, then it should monitor FSCACHE_OP_WAITING as described above and check the state of the object if - necessary (the object might have died whilst the thread was waiting). + necessary (the object might have died while the thread was waiting). When it has finished doing its processing, it should call fscache_op_complete() and fscache_put_operation() on it. diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index 3828e85345ae..16e606c11f40 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -216,7 +216,7 @@ be called whenever userspace asks for a write(2) on the attribute. [struct configfs_bin_attribute] - struct configfs_attribute { + struct configfs_bin_attribute { struct configfs_attribute cb_attr; void *cb_private; size_t cb_max_size; diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index 46d1b1be3a51..605befab300b 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -359,3 +359,24 @@ encryption of files and directories. :maxdepth: 2 fscrypt + +Pathname lookup +=============== + + +This write-up is based on three articles published at lwn.net: + +- <https://lwn.net/Articles/649115/> Pathname lookup in Linux +- <https://lwn.net/Articles/649729/> RCU-walk: faster pathname lookup in Linux +- <https://lwn.net/Articles/650786/> A walk among the symlinks + +Written by Neil Brown with help from Al Viro and Jon Corbet. +It has subsequently been updated to reflect changes in the kernel +including: + +- per-directory parallel name lookup. + +.. toctree:: + :maxdepth: 2 + + path-lookup.rst diff --git a/Documentation/filesystems/path-lookup.md b/Documentation/filesystems/path-lookup.rst index e2edd45c4bc0..9d6b68853f5b 100644 --- a/Documentation/filesystems/path-lookup.md +++ b/Documentation/filesystems/path-lookup.rst @@ -1,20 +1,6 @@ -<head> -<style> p { max-width:50em} ol, ul {max-width: 40em}</style> -</head> -Pathname lookup in Linux. -========================= - -This write-up is based on three articles published at lwn.net: - -- <https://lwn.net/Articles/649115/> Pathname lookup in Linux -- <https://lwn.net/Articles/649729/> RCU-walk: faster pathname lookup in Linux -- <https://lwn.net/Articles/650786/> A walk among the symlinks - -Written by Neil Brown with help from Al Viro and Jon Corbet. - -Introduction ------------- +Introduction to pathname lookup +=============================== The most obvious aspect of pathname lookup, which very little exploration is needed to discover, is that it is complex. There are @@ -32,58 +18,58 @@ distinctions we need to clarify first. There are two sorts of ... -------------------------- -[`openat()`]: http://man7.org/linux/man-pages/man2/openat.2.html +.. _openat: http://man7.org/linux/man-pages/man2/openat.2.html Pathnames (sometimes "file names"), used to identify objects in the filesystem, will be familiar to most readers. They contain two sorts -of elements: "slashes" that are sequences of one or more "`/`" +of elements: "slashes" that are sequences of one or more "``/``" characters, and "components" that are sequences of one or more -non-"`/`" characters. These form two kinds of paths. Those that +non-"``/``" characters. These form two kinds of paths. Those that start with slashes are "absolute" and start from the filesystem root. The others are "relative" and start from the current directory, or from some other location specified by a file descriptor given to a -"xxx`at`" system call such as "[`openat()`]". +"``XXXat``" system call such as `openat() <openat_>`_. -[`execveat()`]: http://man7.org/linux/man-pages/man2/execveat.2.html +.. _execveat: http://man7.org/linux/man-pages/man2/execveat.2.html It is tempting to describe the second kind as starting with a component, but that isn't always accurate: a pathname can lack both slashes and components, it can be empty, in other words. This is -generally forbidden in POSIX, but some of those "xxx`at`" system calls -in Linux permit it when the `AT_EMPTY_PATH` flag is given. For +generally forbidden in POSIX, but some of those "xxx``at``" system calls +in Linux permit it when the ``AT_EMPTY_PATH`` flag is given. For example, if you have an open file descriptor on an executable file you -can execute it by calling [`execveat()`] passing the file descriptor, -an empty path, and the `AT_EMPTY_PATH` flag. +can execute it by calling `execveat() <execveat_>`_ passing +the file descriptor, an empty path, and the ``AT_EMPTY_PATH`` flag. These paths can be divided into two sections: the final component and everything else. The "everything else" is the easy bit. In all cases it must identify a directory that already exists, otherwise an error -such as `ENOENT` or `ENOTDIR` will be reported. +such as ``ENOENT`` or ``ENOTDIR`` will be reported. The final component is not so simple. Not only do different system calls interpret it quite differently (e.g. some create it, some do not), but it might not even exist: neither the empty pathname nor the pathname that is just slashes have a final component. If it does -exist, it could be "`.`" or "`..`" which are handled quite differently +exist, it could be "``.``" or "``..``" which are handled quite differently from other components. -[POSIX]: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_12 +.. _POSIX: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_12 -If a pathname ends with a slash, such as "`/tmp/foo/`" it might be +If a pathname ends with a slash, such as "``/tmp/foo/``" it might be tempting to consider that to have an empty final component. In many ways that would lead to correct results, but not always. In -particular, `mkdir()` and `rmdir()` each create or remove a directory named +particular, ``mkdir()`` and ``rmdir()`` each create or remove a directory named by the final component, and they are required to work with pathnames -ending in "`/`". According to [POSIX] +ending in "``/``". According to POSIX_ -> A pathname that contains at least one non- <slash> character and -> that ends with one or more trailing <slash> characters shall not -> be resolved successfully unless the last pathname component before -> the trailing <slash> characters names an existing directory or a -> directory entry that is to be created for a directory immediately -> after the pathname is resolved. + A pathname that contains at least one non- <slash> character and + that ends with one or more trailing <slash> characters shall not + be resolved successfully unless the last pathname component before + the trailing <slash> characters names an existing directory or a + directory entry that is to be created for a directory immediately + after the pathname is resolved. -The Linux pathname walking code (mostly in `fs/namei.c`) deals with +The Linux pathname walking code (mostly in ``fs/namei.c``) deals with all of these issues: breaking the path into components, handling the "everything else" quite separately from the final component, and checking that the trailing slash is not used where it isn't @@ -100,15 +86,15 @@ of the possible races are seen most clearly in the context of the "dcache" and an understanding of that is central to understanding pathname lookup. -More than just a cache. ------------------------ +More than just a cache +---------------------- The "dcache" caches information about names in each filesystem to make them quickly available for lookup. Each entry (known as a "dentry") contains three significant fields: a component name, a pointer to a parent dentry, and a pointer to the "inode" which contains further information about the object in that parent with -the given name. The inode pointer can be `NULL` indicating that the +the given name. The inode pointer can be ``NULL`` indicating that the name doesn't exist in the parent. While there can be linkage in the dentry of a directory to the dentries of the children, that linkage is not used for pathname lookup, and so will not be considered here. @@ -135,7 +121,7 @@ whether remote filesystems like NFS and 9P, or cluster filesystems like ocfs2 or cephfs. These filesystems allow the VFS to revalidate cached information, and must provide their own protection against awkward races. The VFS can detect these filesystems by the -`DCACHE_OP_REVALIDATE` flag being set in the dentry. +``DCACHE_OP_REVALIDATE`` flag being set in the dentry. REF-walk: simple concurrency management with refcounts and spinlocks -------------------------------------------------------------------- @@ -144,22 +130,23 @@ With all of those divisions carefully classified, we can now start looking at the actual process of walking along a path. In particular we will start with the handling of the "everything else" part of a pathname, and focus on the "REF-walk" approach to concurrency -management. This code is found in the `link_path_walk()` function, if -you ignore all the places that only run when "`LOOKUP_RCU`" +management. This code is found in the ``link_path_walk()`` function, if +you ignore all the places that only run when "``LOOKUP_RCU``" (indicating the use of RCU-walk) is set. -[Meet the Lockers]: https://lwn.net/Articles/453685/ +.. _Meet the Lockers: https://lwn.net/Articles/453685/ REF-walk is fairly heavy-handed with locks and reference counts. Not as heavy-handed as in the old "big kernel lock" days, but certainly not afraid of taking a lock when one is needed. It uses a variety of different concurrency controls. A background understanding of the various primitives is assumed, or can be gleaned from elsewhere such -as in [Meet the Lockers]. +as in `Meet the Lockers`_. The locking mechanisms used by REF-walk include: -### dentry->d_lockref ### +dentry->d_lockref +~~~~~~~~~~~~~~~~~ This uses the lockref primitive to provide both a spinlock and a reference count. The special-sauce of this primitive is that the @@ -168,49 +155,51 @@ with a single atomic memory operation. Holding a reference on a dentry ensures that the dentry won't suddenly be freed and used for something else, so the values in various fields -will behave as expected. It also protects the `->d_inode` reference +will behave as expected. It also protects the ``->d_inode`` reference to the inode to some extent. The association between a dentry and its inode is fairly permanent. For example, when a file is renamed, the dentry and inode move together to the new location. When a file is created the dentry will -initially be negative (i.e. `d_inode` is `NULL`), and will be assigned +initially be negative (i.e. ``d_inode`` is ``NULL``), and will be assigned to the new inode as part of the act of creation. When a file is deleted, this can be reflected in the cache either by -setting `d_inode` to `NULL`, or by removing it from the hash table +setting ``d_inode`` to ``NULL``, or by removing it from the hash table (described shortly) used to look up the name in the parent directory. If the dentry is still in use the second option is used as it is perfectly legal to keep using an open file after it has been deleted and having the dentry around helps. If the dentry is not otherwise in -use (i.e. if the refcount in `d_lockref` is one), only then will -`d_inode` be set to `NULL`. Doing it this way is more efficient for a +use (i.e. if the refcount in ``d_lockref`` is one), only then will +``d_inode`` be set to ``NULL``. Doing it this way is more efficient for a very common case. -So as long as a counted reference is held to a dentry, a non-`NULL` `->d_inode` +So as long as a counted reference is held to a dentry, a non-``NULL`` ``->d_inode`` value will never be changed. -### dentry->d_lock ### +dentry->d_lock +~~~~~~~~~~~~~~ -`d_lock` is a synonym for the spinlock that is part of `d_lockref` above. +``d_lock`` is a synonym for the spinlock that is part of ``d_lockref`` above. For our purposes, holding this lock protects against the dentry being -renamed or unlinked. In particular, its parent (`d_parent`), and its -name (`d_name`) cannot be changed, and it cannot be removed from the +renamed or unlinked. In particular, its parent (``d_parent``), and its +name (``d_name``) cannot be changed, and it cannot be removed from the dentry hash table. -When looking for a name in a directory, REF-walk takes `d_lock` on +When looking for a name in a directory, REF-walk takes ``d_lock`` on each candidate dentry that it finds in the hash table and then checks that the parent and name are correct. So it doesn't lock the parent while searching in the cache; it only locks children. -When looking for the parent for a given name (to handle "`..`"), -REF-walk can take `d_lock` to get a stable reference to `d_parent`, +When looking for the parent for a given name (to handle "``..``"), +REF-walk can take ``d_lock`` to get a stable reference to ``d_parent``, but it first tries a more lightweight approach. As seen in -`dget_parent()`, if a reference can be claimed on the parent, and if -subsequently `d_parent` can be seen to have not changed, then there is +``dget_parent()``, if a reference can be claimed on the parent, and if +subsequently ``d_parent`` can be seen to have not changed, then there is no need to actually take the lock on the child. -### rename_lock ### +rename_lock +~~~~~~~~~~~ Looking up a given name in a given directory involves computing a hash from the two values (the name and the dentry of the directory), @@ -224,71 +213,117 @@ happened to be looking at a dentry that was moved in this way, it might end up continuing the search down the wrong chain, and so miss out on part of the correct chain. -The name-lookup process (`d_lookup()`) does _not_ try to prevent this +The name-lookup process (``d_lookup()``) does _not_ try to prevent this from happening, but only to detect when it happens. -`rename_lock` is a seqlock that is updated whenever any dentry is -renamed. If `d_lookup` finds that a rename happened while it +``rename_lock`` is a seqlock that is updated whenever any dentry is +renamed. If ``d_lookup`` finds that a rename happened while it unsuccessfully scanned a chain in the hash table, it simply tries again. -### inode->i_mutex ### +inode->i_rwsem +~~~~~~~~~~~~~~ -`i_mutex` is a mutex that serializes all changes to a particular -directory. This ensures that, for example, an `unlink()` and a `rename()` +``i_rwsem`` is a read/write semaphore that serializes all changes to a particular +directory. This ensures that, for example, an ``unlink()`` and a ``rename()`` cannot both happen at the same time. It also keeps the directory stable while the filesystem is asked to look up a name that is not -currently in the dcache. +currently in the dcache or, optionally, when the list of entries in a +directory is being retrieved with ``readdir()``. -This has a complementary role to that of `d_lock`: `i_mutex` on a -directory protects all of the names in that directory, while `d_lock` +This has a complementary role to that of ``d_lock``: ``i_rwsem`` on a +directory protects all of the names in that directory, while ``d_lock`` on a name protects just one name in a directory. Most changes to the -dcache hold `i_mutex` on the relevant directory inode and briefly take -`d_lock` on one or more the dentries while the change happens. One +dcache hold ``i_rwsem`` on the relevant directory inode and briefly take +``d_lock`` on one or more the dentries while the change happens. One exception is when idle dentries are removed from the dcache due to -memory pressure. This uses `d_lock`, but `i_mutex` plays no role. +memory pressure. This uses ``d_lock``, but ``i_rwsem`` plays no role. -The mutex affects pathname lookup in two distinct ways. Firstly it -serializes lookup of a name in a directory. `walk_component()` uses -`lookup_fast()` first which, in turn, checks to see if the name is in the cache, -using only `d_lock` locking. If the name isn't found, then `walk_component()` -falls back to `lookup_slow()` which takes `i_mutex`, checks again that +The semaphore affects pathname lookup in two distinct ways. Firstly it +prevents changes during lookup of a name in a directory. ``walk_component()`` uses +``lookup_fast()`` first which, in turn, checks to see if the name is in the cache, +using only ``d_lock`` locking. If the name isn't found, then ``walk_component()`` +falls back to ``lookup_slow()`` which takes a shared lock on ``i_rwsem``, checks again that the name isn't in the cache, and then calls in to the filesystem to get a definitive answer. A new dentry will be added to the cache regardless of the result. Secondly, when pathname lookup reaches the final component, it will -sometimes need to take `i_mutex` before performing the last lookup so +sometimes need to take an exclusive lock on ``i_rwsem`` before performing the last lookup so that the required exclusion can be achieved. How path lookup chooses -to take, or not take, `i_mutex` is one of the +to take, or not take, ``i_rwsem`` is one of the issues addressed in a subsequent section. -### mnt->mnt_count ### - -`mnt_count` is a per-CPU reference counter on "`mount`" structures. +If two threads attempt to look up the same name at the same time - a +name that is not yet in the dcache - the shared lock on ``i_rwsem`` will +not prevent them both adding new dentries with the same name. As this +would result in confusion an extra level of interlocking is used, +based around a secondary hash table (``in_lookup_hashtable``) and a +per-dentry flag bit (``DCACHE_PAR_LOOKUP``). + +To add a new dentry to the cache while only holding a shared lock on +``i_rwsem``, a thread must call ``d_alloc_parallel()``. This allocates a +dentry, stores the required name and parent in it, checks if there +is already a matching dentry in the primary or secondary hash +tables, and if not, stores the newly allocated dentry in the secondary +hash table, with ``DCACHE_PAR_LOOKUP`` set. + +If a matching dentry was found in the primary hash table then that is +returned and the caller can know that it lost a race with some other +thread adding the entry. If no matching dentry is found in either +cache, the newly allocated dentry is returned and the caller can +detect this from the presence of ``DCACHE_PAR_LOOKUP``. In this case it +knows that it has won any race and now is responsible for asking the +filesystem to perform the lookup and find the matching inode. When +the lookup is complete, it must call ``d_lookup_done()`` which clears +the flag and does some other house keeping, including removing the +dentry from the secondary hash table - it will normally have been +added to the primary hash table already. Note that a ``struct +waitqueue_head`` is passed to ``d_alloc_parallel()``, and +``d_lookup_done()`` must be called while this ``waitqueue_head`` is still +in scope. + +If a matching dentry is found in the secondary hash table, +``d_alloc_parallel()`` has a little more work to do. It first waits for +``DCACHE_PAR_LOOKUP`` to be cleared, using a wait_queue that was passed +to the instance of ``d_alloc_parallel()`` that won the race and that +will be woken by the call to ``d_lookup_done()``. It then checks to see +if the dentry has now been added to the primary hash table. If it +has, the dentry is returned and the caller just sees that it lost any +race. If it hasn't been added to the primary hash table, the most +likely explanation is that some other dentry was added instead using +``d_splice_alias()``. In any case, ``d_alloc_parallel()`` repeats all the +look ups from the start and will normally return something from the +primary hash table. + +mnt->mnt_count +~~~~~~~~~~~~~~ + +``mnt_count`` is a per-CPU reference counter on "``mount``" structures. Per-CPU here means that incrementing the count is cheap as it only uses CPU-local memory, but checking if the count is zero is expensive as -it needs to check with every CPU. Taking a `mnt_count` reference +it needs to check with every CPU. Taking a ``mnt_count`` reference prevents the mount structure from disappearing as the result of regular unmount operations, but does not prevent a "lazy" unmount. So holding -`mnt_count` doesn't ensure that the mount remains in the namespace and, +``mnt_count`` doesn't ensure that the mount remains in the namespace and, in particular, doesn't stabilize the link to the mounted-on dentry. It -does, however, ensure that the `mount` data structure remains coherent, +does, however, ensure that the ``mount`` data structure remains coherent, and it provides a reference to the root dentry of the mounted -filesystem. So a reference through `->mnt_count` provides a stable +filesystem. So a reference through ``->mnt_count`` provides a stable reference to the mounted dentry, but not the mounted-on dentry. -### mount_lock ### +mount_lock +~~~~~~~~~~ -`mount_lock` is a global seqlock, a bit like `rename_lock`. It can be used to +``mount_lock`` is a global seqlock, a bit like ``rename_lock``. It can be used to check if any change has been made to any mount points. While walking down the tree (away from the root) this lock is used when crossing a mount point to check that the crossing was safe. That is, the value in the seqlock is read, then the code finds the mount that is mounted on the current directory, if there is one, and increments -the `mnt_count`. Finally the value in `mount_lock` is checked against +the ``mnt_count``. Finally the value in ``mount_lock`` is checked against the old value. If there is no change, then the crossing was safe. If there -was a change, the `mnt_count` is decremented and the whole process is +was a change, the ``mnt_count`` is decremented and the whole process is retried. When walking up the tree (towards the root) by following a ".." link, @@ -298,7 +333,8 @@ any changes to any mount points while stepping up. This locking is needed to stabilize the link to the mounted-on dentry, which the refcount on the mount itself doesn't ensure. -### RCU ### +RCU +~~~ Finally the global (but extremely lightweight) RCU read lock is held from time to time to ensure certain data structures don't get freed @@ -307,137 +343,141 @@ unexpectedly. In particular it is held while scanning chains in the dcache hash table, and the mount point hash table. -Bringing it together with `struct nameidata` +Bringing it together with ``struct nameidata`` -------------------------------------------- -[First edition Unix]: http://minnie.tuhs.org/cgi-bin/utree.pl?file=V1/u2.s +.. _First edition Unix: http://minnie.tuhs.org/cgi-bin/utree.pl?file=V1/u2.s Throughout the process of walking a path, the current status is stored -in a `struct nameidata`, "namei" being the traditional name - dating -all the way back to [First Edition Unix] - of the function that -converts a "name" to an "inode". `struct nameidata` contains (among +in a ``struct nameidata``, "namei" being the traditional name - dating +all the way back to `First Edition Unix`_ - of the function that +converts a "name" to an "inode". ``struct nameidata`` contains (among other fields): -### `struct path path` ### +``struct path path`` +~~~~~~~~~~~~~~~~~~ -A `path` contains a `struct vfsmount` (which is -embedded in a `struct mount`) and a `struct dentry`. Together these +A ``path`` contains a ``struct vfsmount`` (which is +embedded in a ``struct mount``) and a ``struct dentry``. Together these record the current status of the walk. They start out referring to the starting point (the current working directory, the root directory, or some other directory identified by a file descriptor), and are updated on each -step. A reference through `d_lockref` and `mnt_count` is always +step. A reference through ``d_lockref`` and ``mnt_count`` is always held. -### `struct qstr last` ### +``struct qstr last`` +~~~~~~~~~~~~~~~~~~ -This is a string together with a length (i.e. _not_ `nul` terminated) +This is a string together with a length (i.e. _not_ ``nul`` terminated) that is the "next" component in the pathname. -### `int last_type` ### +``int last_type`` +~~~~~~~~~~~~~~~ -This is one of `LAST_NORM`, `LAST_ROOT`, `LAST_DOT`, `LAST_DOTDOT`, or -`LAST_BIND`. The `last` field is only valid if the type is -`LAST_NORM`. `LAST_BIND` is used when following a symlink and no +This is one of ``LAST_NORM``, ``LAST_ROOT``, ``LAST_DOT``, ``LAST_DOTDOT``, or +``LAST_BIND``. The ``last`` field is only valid if the type is +``LAST_NORM``. ``LAST_BIND`` is used when following a symlink and no components of the symlink have been processed yet. Others should be fairly self-explanatory. -### `struct path root` ### +``struct path root`` +~~~~~~~~~~~~~~~~~~ This is used to hold a reference to the effective root of the filesystem. Often that reference won't be needed, so this field is only assigned the first time it is used, or when a non-standard root -is requested. Keeping a reference in the `nameidata` ensures that +is requested. Keeping a reference in the ``nameidata`` ensures that only one root is in effect for the entire path walk, even if it races -with a `chroot()` system call. +with a ``chroot()`` system call. The root is needed when either of two conditions holds: (1) either the -pathname or a symbolic link starts with a "'/'", or (2) a "`..`" -component is being handled, since "`..`" from the root must always stay +pathname or a symbolic link starts with a "'/'", or (2) a "``..``" +component is being handled, since "``..``" from the root must always stay at the root. The value used is usually the current root directory of the calling process. An alternate root can be provided as when -`sysctl()` calls `file_open_root()`, and when NFSv4 or Btrfs call -`mount_subtree()`. In each case a pathname is being looked up in a very +``sysctl()`` calls ``file_open_root()``, and when NFSv4 or Btrfs call +``mount_subtree()``. In each case a pathname is being looked up in a very specific part of the filesystem, and the lookup must not be allowed to -escape that subtree. It works a bit like a local `chroot()`. +escape that subtree. It works a bit like a local ``chroot()``. Ignoring the handling of symbolic links, we can now describe the -"`link_path_walk()`" function, which handles the lookup of everything +"``link_path_walk()``" function, which handles the lookup of everything except the final component as: -> Given a path (`name`) and a nameidata structure (`nd`), check that the -> current directory has execute permission and then advance `name` -> over one component while updating `last_type` and `last`. If that -> was the final component, then return, otherwise call -> `walk_component()` and repeat from the top. + Given a path (``name``) and a nameidata structure (``nd``), check that the + current directory has execute permission and then advance ``name`` + over one component while updating ``last_type`` and ``last``. If that + was the final component, then return, otherwise call + ``walk_component()`` and repeat from the top. -`walk_component()` is even easier. If the component is `LAST_DOTS`, -it calls `handle_dots()` which does the necessary locking as already -described. If it finds a `LAST_NORM` component it first calls -"`lookup_fast()`" which only looks in the dcache, but will ask the +``walk_component()`` is even easier. If the component is ``LAST_DOTS``, +it calls ``handle_dots()`` which does the necessary locking as already +described. If it finds a ``LAST_NORM`` component it first calls +"``lookup_fast()``" which only looks in the dcache, but will ask the filesystem to revalidate the result if it is that sort of filesystem. -If that doesn't get a good result, it calls "`lookup_slow()`" which -takes the `i_mutex`, rechecks the cache, and then asks the filesystem +If that doesn't get a good result, it calls "``lookup_slow()``" which +takes ``i_rwsem``, rechecks the cache, and then asks the filesystem to find a definitive answer. Each of these will call -`follow_managed()` (as described below) to handle any mount points. +``follow_managed()`` (as described below) to handle any mount points. -In the absence of symbolic links, `walk_component()` creates a new -`struct path` containing a counted reference to the new dentry and a -reference to the new `vfsmount` which is only counted if it is -different from the previous `vfsmount`. It then calls -`path_to_nameidata()` to install the new `struct path` in the -`struct nameidata` and drop the unneeded references. +In the absence of symbolic links, ``walk_component()`` creates a new +``struct path`` containing a counted reference to the new dentry and a +reference to the new ``vfsmount`` which is only counted if it is +different from the previous ``vfsmount``. It then calls +``path_to_nameidata()`` to install the new ``struct path`` in the +``struct nameidata`` and drop the unneeded references. This "hand-over-hand" sequencing of getting a reference to the new dentry before dropping the reference to the previous dentry may seem obvious, but is worth pointing out so that we will recognize its analogue in the "RCU-walk" version. -Handling the final component. ------------------------------ +Handling the final component +---------------------------- -`link_path_walk()` only walks as far as setting `nd->last` and -`nd->last_type` to refer to the final component of the path. It does -not call `walk_component()` that last time. Handling that final +``link_path_walk()`` only walks as far as setting ``nd->last`` and +``nd->last_type`` to refer to the final component of the path. It does +not call ``walk_component()`` that last time. Handling that final component remains for the caller to sort out. Those callers are -`path_lookupat()`, `path_parentat()`, `path_mountpoint()` and -`path_openat()` each of which handles the differing requirements of +``path_lookupat()``, ``path_parentat()``, ``path_mountpoint()`` and +``path_openat()`` each of which handles the differing requirements of different system calls. -`path_parentat()` is clearly the simplest - it just wraps a little bit -of housekeeping around `link_path_walk()` and returns the parent +``path_parentat()`` is clearly the simplest - it just wraps a little bit +of housekeeping around ``link_path_walk()`` and returns the parent directory and final component to the caller. The caller will be either -aiming to create a name (via `filename_create()`) or remove or rename -a name (in which case `user_path_parent()` is used). They will use -`i_mutex` to exclude other changes while they validate and then +aiming to create a name (via ``filename_create()``) or remove or rename +a name (in which case ``user_path_parent()`` is used). They will use +``i_rwsem`` to exclude other changes while they validate and then perform their operation. -`path_lookupat()` is nearly as simple - it is used when an existing -object is wanted such as by `stat()` or `chmod()`. It essentially just -calls `walk_component()` on the final component through a call to -`lookup_last()`. `path_lookupat()` returns just the final dentry. +``path_lookupat()`` is nearly as simple - it is used when an existing +object is wanted such as by ``stat()`` or ``chmod()``. It essentially just +calls ``walk_component()`` on the final component through a call to +``lookup_last()``. ``path_lookupat()`` returns just the final dentry. -`path_mountpoint()` handles the special case of unmounting which must +``path_mountpoint()`` handles the special case of unmounting which must not try to revalidate the mounted filesystem. It effectively -contains, through a call to `mountpoint_last()`, an alternate -implementation of `lookup_slow()` which skips that step. This is +contains, through a call to ``mountpoint_last()``, an alternate +implementation of ``lookup_slow()`` which skips that step. This is important when unmounting a filesystem that is inaccessible, such as one provided by a dead NFS server. -Finally `path_openat()` is used for the `open()` system call; it -contains, in support functions starting with "`do_last()`", all the +Finally ``path_openat()`` is used for the ``open()`` system call; it +contains, in support functions starting with "``do_last()``", all the complexity needed to handle the different subtleties of O_CREAT (with -or without O_EXCL), final "`/`" characters, and trailing symbolic +or without O_EXCL), final "``/``" characters, and trailing symbolic links. We will revisit this in the final part of this series, which -focuses on those symbolic links. "`do_last()`" will sometimes, but -not always, take `i_mutex`, depending on what it finds. +focuses on those symbolic links. "``do_last()``" will sometimes, but +not always, take ``i_rwsem``, depending on what it finds. Each of these, or the functions which call them, need to be alert to -the possibility that the final component is not `LAST_NORM`. If the +the possibility that the final component is not ``LAST_NORM``. If the goal of the lookup is to create something, then any value for -`last_type` other than `LAST_NORM` will result in an error. For -example if `path_parentat()` reports `LAST_DOTDOT`, then the caller +``last_type`` other than ``LAST_NORM`` will result in an error. For +example if ``path_parentat()`` reports ``LAST_DOTDOT``, then the caller won't try to create that name. They also check for trailing slashes -by testing `last.name[last.len]`. If there is any character beyond +by testing ``last.name[last.len]``. If there is any character beyond the final component, it must be a trailing slash. Revalidation and automounts @@ -448,12 +488,12 @@ process not yet covered. One is the handling of stale cache entries and the other is automounts. On filesystems that require it, the lookup routines will call the -`->d_revalidate()` dentry method to ensure that the cached information +``->d_revalidate()`` dentry method to ensure that the cached information is current. This will often confirm validity or update a few details from a server. In some cases it may find that there has been change further up the path and that something that was thought to be valid previously isn't really. When this happens the lookup of the whole -path is aborted and retried with the "`LOOKUP_REVAL`" flag set. This +path is aborted and retried with the "``LOOKUP_REVAL``" flag set. This forces revalidation to be more thorough. We will see more details of this retry process in the next article. @@ -465,52 +505,55 @@ tree, but a few notes specifically related to path lookup are in order here. The Linux VFS has a concept of "managed" dentries which is reflected -in function names such as "`follow_managed()`". There are three +in function names such as "``follow_managed()``". There are three potentially interesting things about these dentries corresponding -to three different flags that might be set in `dentry->d_flags`: +to three different flags that might be set in ``dentry->d_flags``: -### `DCACHE_MANAGE_TRANSIT` ### +``DCACHE_MANAGE_TRANSIT`` +~~~~~~~~~~~~~~~~~~~~~~~ If this flag has been set, then the filesystem has requested that the -`d_manage()` dentry operation be called before handling any possible +``d_manage()`` dentry operation be called before handling any possible mount point. This can perform two particular services: It can block to avoid races. If an automount point is being -unmounted, the `d_manage()` function will usually wait for that +unmounted, the ``d_manage()`` function will usually wait for that process to complete before letting the new lookup proceed and possibly trigger a new automount. It can selectively allow only some processes to transit through a mount point. When a server process is managing automounts, it may need to access a directory without triggering normal automount -processing. That server process can identify itself to the `autofs` +processing. That server process can identify itself to the ``autofs`` filesystem, which will then give it a special pass through -`d_manage()` by returning `-EISDIR`. +``d_manage()`` by returning ``-EISDIR``. -### `DCACHE_MOUNTED` ### +``DCACHE_MOUNTED`` +~~~~~~~~~~~~~~~~ This flag is set on every dentry that is mounted on. As Linux supports multiple filesystem namespaces, it is possible that the dentry may not be mounted on in *this* namespace, just in some other. So this flag is seen as a hint, not a promise. -If this flag is set, and `d_manage()` didn't return `-EISDIR`, -`lookup_mnt()` is called to examine the mount hash table (honoring the -`mount_lock` described earlier) and possibly return a new `vfsmount` -and a new `dentry` (both with counted references). +If this flag is set, and ``d_manage()`` didn't return ``-EISDIR``, +``lookup_mnt()`` is called to examine the mount hash table (honoring the +``mount_lock`` described earlier) and possibly return a new ``vfsmount`` +and a new ``dentry`` (both with counted references). -### `DCACHE_NEED_AUTOMOUNT` ### +``DCACHE_NEED_AUTOMOUNT`` +~~~~~~~~~~~~~~~~~~~~~~~ -If `d_manage()` allowed us to get this far, and `lookup_mnt()` didn't -find a mount point, then this flag causes the `d_automount()` dentry +If ``d_manage()`` allowed us to get this far, and ``lookup_mnt()`` didn't +find a mount point, then this flag causes the ``d_automount()`` dentry operation to be called. -The `d_automount()` operation can be arbitrarily complex and may +The ``d_automount()`` operation can be arbitrarily complex and may communicate with server processes etc. but it should ultimately either report that there was an error, that there was nothing to mount, or -should provide an updated `struct path` with new `dentry` and `vfsmount`. +should provide an updated ``struct path`` with new ``dentry`` and ``vfsmount``. -In the latter case, `finish_automount()` will be called to safely +In the latter case, ``finish_automount()`` will be called to safely install the new mount point into the mount table. There is no new locking of import here and it is important that no @@ -567,7 +610,7 @@ isn't in the cache, then it tries to stop gracefully and switch to REF-walk. This stopping requires getting a counted reference on the current -`vfsmount` and `dentry`, and ensuring that these are still valid - +``vfsmount`` and ``dentry``, and ensuring that these are still valid - that a path walk with REF-walk would have found the same entries. This is an invariant that RCU-walk must guarantee. It can only make decisions, such as selecting the next step, that are decisions which @@ -578,21 +621,21 @@ RCU-walk finds it cannot stop gracefully, it simply gives up and restarts from the top with REF-walk. This pattern of "try RCU-walk, if that fails try REF-walk" can be -clearly seen in functions like `filename_lookup()`, -`filename_parentat()`, `filename_mountpoint()`, -`do_filp_open()`, and `do_file_open_root()`. These five -correspond roughly to the four `path_`* functions we met earlier, -each of which calls `link_path_walk()`. The `path_*` functions are +clearly seen in functions like ``filename_lookup()``, +``filename_parentat()``, ``filename_mountpoint()``, +``do_filp_open()``, and ``do_file_open_root()``. These five +correspond roughly to the four ``path_``* functions we met earlier, +each of which calls ``link_path_walk()``. The ``path_*`` functions are called using different mode flags until a mode is found which works. -They are first called with `LOOKUP_RCU` set to request "RCU-walk". If -that fails with the error `ECHILD` they are called again with no +They are first called with ``LOOKUP_RCU`` set to request "RCU-walk". If +that fails with the error ``ECHILD`` they are called again with no special flag to request "REF-walk". If either of those report the -error `ESTALE` a final attempt is made with `LOOKUP_REVAL` set (and no -`LOOKUP_RCU`) to ensure that entries found in the cache are forcibly +error ``ESTALE`` a final attempt is made with ``LOOKUP_REVAL`` set (and no +``LOOKUP_RCU``) to ensure that entries found in the cache are forcibly revalidated - normally entries are only revalidated if the filesystem determines that they are too old to trust. -The `LOOKUP_RCU` attempt may drop that flag internally and switch to +The ``LOOKUP_RCU`` attempt may drop that flag internally and switch to REF-walk, but will never then try to switch back to RCU-walk. Places that trip up RCU-walk are much more likely to be near the leaves and so it is very unlikely that there will be much, if any, benefit from @@ -602,7 +645,7 @@ RCU and seqlocks: fast and light -------------------------------- RCU is, unsurprisingly, critical to RCU-walk mode. The -`rcu_read_lock()` is held for the entire time that RCU-walk is walking +``rcu_read_lock()`` is held for the entire time that RCU-walk is walking down a path. The particular guarantee it provides is that the key data structures - dentries, inodes, super_blocks, and mounts - will not be freed while the lock is held. They might be unlinked or @@ -614,7 +657,7 @@ seqlocks. As we saw above, REF-walk holds a counted reference to the current dentry and the current vfsmount, and does not release those references before taking references to the "next" dentry or vfsmount. It also -sometimes takes the `d_lock` spinlock. These references and locks are +sometimes takes the ``d_lock`` spinlock. These references and locks are taken to prevent certain changes from happening. RCU-walk must not take those references or locks and so cannot prevent such changes. Instead, it checks to see if a change has been made, and aborts or @@ -624,123 +667,126 @@ To preserve the invariant mentioned above (that RCU-walk may only make decisions that REF-walk could have made), it must make the checks at or near the same places that REF-walk holds the references. So, when REF-walk increments a reference count or takes a spinlock, RCU-walk -samples the status of a seqlock using `read_seqcount_begin()` or a +samples the status of a seqlock using ``read_seqcount_begin()`` or a similar function. When REF-walk decrements the count or drops the lock, RCU-walk checks if the sampled status is still valid using -`read_seqcount_retry()` or similar. +``read_seqcount_retry()`` or similar. However, there is a little bit more to seqlocks than that. If RCU-walk accesses two different fields in a seqlock-protected structure, or accesses the same field twice, there is no a priori guarantee of any consistency between those accesses. When consistency is needed - which it usually is - RCU-walk must take a copy and then -use `read_seqcount_retry()` to validate that copy. +use ``read_seqcount_retry()`` to validate that copy. -`read_seqcount_retry()` not only checks the sequence number, but also +``read_seqcount_retry()`` not only checks the sequence number, but also imposes a memory barrier so that no memory-read instruction from *before* the call can be delayed until *after* the call, either by the CPU or by the compiler. A simple example of this can be seen in -`slow_dentry_cmp()` which, for filesystems which do not use simple +``slow_dentry_cmp()`` which, for filesystems which do not use simple byte-wise name equality, calls into the filesystem to compare a name against a dentry. The length and name pointer are copied into local -variables, then `read_seqcount_retry()` is called to confirm the two -are consistent, and only then is `->d_compare()` called. When -standard filename comparison is used, `dentry_cmp()` is called -instead. Notably it does _not_ use `read_seqcount_retry()`, but +variables, then ``read_seqcount_retry()`` is called to confirm the two +are consistent, and only then is ``->d_compare()`` called. When +standard filename comparison is used, ``dentry_cmp()`` is called +instead. Notably it does _not_ use ``read_seqcount_retry()``, but instead has a large comment explaining why the consistency guarantee -isn't necessary. A subsequent `read_seqcount_retry()` will be +isn't necessary. A subsequent ``read_seqcount_retry()`` will be sufficient to catch any problem that could occur at this point. With that little refresher on seqlocks out of the way we can look at the bigger picture of how RCU-walk uses seqlocks. -### `mount_lock` and `nd->m_seq` ### +``mount_lock`` and ``nd->m_seq`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -We already met the `mount_lock` seqlock when REF-walk used it to +We already met the ``mount_lock`` seqlock when REF-walk used it to ensure that crossing a mount point is performed safely. RCU-walk uses it for that too, but for quite a bit more. -Instead of taking a counted reference to each `vfsmount` as it -descends the tree, RCU-walk samples the state of `mount_lock` at the +Instead of taking a counted reference to each ``vfsmount`` as it +descends the tree, RCU-walk samples the state of ``mount_lock`` at the start of the walk and stores this initial sequence number in the -`struct nameidata` in the `m_seq` field. This one lock and one -sequence number are used to validate all accesses to all `vfsmounts`, +``struct nameidata`` in the ``m_seq`` field. This one lock and one +sequence number are used to validate all accesses to all ``vfsmounts``, and all mount point crossings. As changes to the mount table are relatively rare, it is reasonable to fall back on REF-walk any time that any "mount" or "unmount" happens. -`m_seq` is checked (using `read_seqretry()`) at the end of an RCU-walk +``m_seq`` is checked (using ``read_seqretry()``) at the end of an RCU-walk sequence, whether switching to REF-walk for the rest of the path or when the end of the path is reached. It is also checked when stepping -down over a mount point (in `__follow_mount_rcu()`) or up (in -`follow_dotdot_rcu()`). If it is ever found to have changed, the +down over a mount point (in ``__follow_mount_rcu()``) or up (in +``follow_dotdot_rcu()``). If it is ever found to have changed, the whole RCU-walk sequence is aborted and the path is processed again by REF-walk. -If RCU-walk finds that `mount_lock` hasn't changed then it can be sure +If RCU-walk finds that ``mount_lock`` hasn't changed then it can be sure that, had REF-walk taken counted references on each vfsmount, the results would have been the same. This ensures the invariant holds, at least for vfsmount structures. -### `dentry->d_seq` and `nd->seq`. ### +``dentry->d_seq`` and ``nd->seq`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -In place of taking a count or lock on `d_reflock`, RCU-walk samples -the per-dentry `d_seq` seqlock, and stores the sequence number in the -`seq` field of the nameidata structure, so `nd->seq` should always be -the current sequence number of `nd->dentry`. This number needs to be +In place of taking a count or lock on ``d_reflock``, RCU-walk samples +the per-dentry ``d_seq`` seqlock, and stores the sequence number in the +``seq`` field of the nameidata structure, so ``nd->seq`` should always be +the current sequence number of ``nd->dentry``. This number needs to be revalidated after copying, and before using, the name, parent, or inode of the dentry. The handling of the name we have already looked at, and the parent is -only accessed in `follow_dotdot_rcu()` which fairly trivially follows +only accessed in ``follow_dotdot_rcu()`` which fairly trivially follows the required pattern, though it does so for three different cases. -When not at a mount point, `d_parent` is followed and its `d_seq` is +When not at a mount point, ``d_parent`` is followed and its ``d_seq`` is collected. When we are at a mount point, we instead follow the -`mnt->mnt_mountpoint` link to get a new dentry and collect its -`d_seq`. Then, after finally finding a `d_parent` to follow, we must +``mnt->mnt_mountpoint`` link to get a new dentry and collect its +``d_seq``. Then, after finally finding a ``d_parent`` to follow, we must check if we have landed on a mount point and, if so, must find that -mount point and follow the `mnt->mnt_root` link. This would imply a +mount point and follow the ``mnt->mnt_root`` link. This would imply a somewhat unusual, but certainly possible, circumstance where the starting point of the path lookup was in part of the filesystem that was mounted on, and so not visible from the root. -The inode pointer, stored in `->d_inode`, is a little more +The inode pointer, stored in ``->d_inode``, is a little more interesting. The inode will always need to be accessed at least twice, once to determine if it is NULL and once to verify access permissions. Symlink handling requires a validated inode pointer too. Rather than revalidating on each access, a copy is made on the first -access and it is stored in the `inode` field of `nameidata` from where +access and it is stored in the ``inode`` field of ``nameidata`` from where it can be safely accessed without further validation. -`lookup_fast()` is the only lookup routine that is used in RCU-mode, -`lookup_slow()` being too slow and requiring locks. It is in -`lookup_fast()` that we find the important "hand over hand" tracking +``lookup_fast()`` is the only lookup routine that is used in RCU-mode, +``lookup_slow()`` being too slow and requiring locks. It is in +``lookup_fast()`` that we find the important "hand over hand" tracking of the current dentry. -The current `dentry` and current `seq` number are passed to -`__d_lookup_rcu()` which, on success, returns a new `dentry` and a -new `seq` number. `lookup_fast()` then copies the inode pointer and -revalidates the new `seq` number. It then validates the old `dentry` -with the old `seq` number one last time and only then continues. This -process of getting the `seq` number of the new dentry and then -checking the `seq` number of the old exactly mirrors the process of +The current ``dentry`` and current ``seq`` number are passed to +``__d_lookup_rcu()`` which, on success, returns a new ``dentry`` and a +new ``seq`` number. ``lookup_fast()`` then copies the inode pointer and +revalidates the new ``seq`` number. It then validates the old ``dentry`` +with the old ``seq`` number one last time and only then continues. This +process of getting the ``seq`` number of the new dentry and then +checking the ``seq`` number of the old exactly mirrors the process of getting a counted reference to the new dentry before dropping that for the old dentry which we saw in REF-walk. -### No `inode->i_mutex` or even `rename_lock` ### +No ``inode->i_rwsem`` or even ``rename_lock`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -A mutex is a fairly heavyweight lock that can only be taken when it is -permissible to sleep. As `rcu_read_lock()` forbids sleeping, -`inode->i_mutex` plays no role in RCU-walk. If some other thread does -take `i_mutex` and modifies the directory in a way that RCU-walk needs +A semaphore is a fairly heavyweight lock that can only be taken when it is +permissible to sleep. As ``rcu_read_lock()`` forbids sleeping, +``inode->i_rwsem`` plays no role in RCU-walk. If some other thread does +take ``i_rwsem`` and modifies the directory in a way that RCU-walk needs to notice, the result will be either that RCU-walk fails to find the dentry that it is looking for, or it will find a dentry which -`read_seqretry()` won't validate. In either case it will drop down to +``read_seqretry()`` won't validate. In either case it will drop down to REF-walk mode which can take whatever locks are needed. -Though `rename_lock` could be used by RCU-walk as it doesn't require -any sleeping, RCU-walk doesn't bother. REF-walk uses `rename_lock` to +Though ``rename_lock`` could be used by RCU-walk as it doesn't require +any sleeping, RCU-walk doesn't bother. REF-walk uses ``rename_lock`` to protect against the possibility of hash chains in the dcache changing while they are being searched. This can result in failing to find something that actually is there. When RCU-walk fails to find @@ -749,57 +795,57 @@ already drops down to REF-walk and tries again with appropriate locking. This neatly handles all cases, so adding extra checks on rename_lock would bring no significant value. -`unlazy walk()` and `complete_walk()` +``unlazy walk()`` and ``complete_walk()`` ------------------------------------- That "dropping down to REF-walk" typically involves a call to -`unlazy_walk()`, so named because "RCU-walk" is also sometimes -referred to as "lazy walk". `unlazy_walk()` is called when +``unlazy_walk()``, so named because "RCU-walk" is also sometimes +referred to as "lazy walk". ``unlazy_walk()`` is called when following the path down to the current vfsmount/dentry pair seems to have proceeded successfully, but the next step is problematic. This can happen if the next name cannot be found in the dcache, if permission checking or name revalidation couldn't be achieved while -the `rcu_read_lock()` is held (which forbids sleeping), if an +the ``rcu_read_lock()`` is held (which forbids sleeping), if an automount point is found, or in a couple of cases involving symlinks. -It is also called from `complete_walk()` when the lookup has reached +It is also called from ``complete_walk()`` when the lookup has reached the final component, or the very end of the path, depending on which particular flavor of lookup is used. Other reasons for dropping out of RCU-walk that do not trigger a call -to `unlazy_walk()` are when some inconsistency is found that cannot be -handled immediately, such as `mount_lock` or one of the `d_seq` +to ``unlazy_walk()`` are when some inconsistency is found that cannot be +handled immediately, such as ``mount_lock`` or one of the ``d_seq`` seqlocks reporting a change. In these cases the relevant function -will return `-ECHILD` which will percolate up until it triggers a new +will return ``-ECHILD`` which will percolate up until it triggers a new attempt from the top using REF-walk. -For those cases where `unlazy_walk()` is an option, it essentially +For those cases where ``unlazy_walk()`` is an option, it essentially takes a reference on each of the pointers that it holds (vfsmount, dentry, and possibly some symbolic links) and then verifies that the relevant seqlocks have not been changed. If there have been changes, -it, too, aborts with `-ECHILD`, otherwise the transition to REF-walk +it, too, aborts with ``-ECHILD``, otherwise the transition to REF-walk has been a success and the lookup process continues. Taking a reference on those pointers is not quite as simple as just incrementing a counter. That works to take a second reference if you already have one (often indirectly through another object), but it isn't sufficient if you don't actually have a counted reference at -all. For `dentry->d_lockref`, it is safe to increment the reference +all. For ``dentry->d_lockref``, it is safe to increment the reference counter to get a reference unless it has been explicitly marked as -"dead" which involves setting the counter to `-128`. -`lockref_get_not_dead()` achieves this. +"dead" which involves setting the counter to ``-128``. +``lockref_get_not_dead()`` achieves this. -For `mnt->mnt_count` it is safe to take a reference as long as -`mount_lock` is then used to validate the reference. If that +For ``mnt->mnt_count`` it is safe to take a reference as long as +``mount_lock`` is then used to validate the reference. If that validation fails, it may *not* be safe to just drop that reference in -the standard way of calling `mnt_put()` - an unmount may have -progressed too far. So the code in `legitimize_mnt()`, when it +the standard way of calling ``mnt_put()`` - an unmount may have +progressed too far. So the code in ``legitimize_mnt()``, when it finds that the reference it got might not be safe, checks the -`MNT_SYNC_UMOUNT` flag to determine if a simple `mnt_put()` is +``MNT_SYNC_UMOUNT`` flag to determine if a simple ``mnt_put()`` is correct, or if it should just decrement the count and pretend none of this ever happened. Taking care in filesystems ---------------------------- +-------------------------- RCU-walk depends almost entirely on cached information and often will not call into the filesystem at all. However there are two places, @@ -809,26 +855,26 @@ careful. If the filesystem has non-standard permission-checking requirements - such as a networked filesystem which may need to check with the server -- the `i_op->permission` interface might be called during RCU-walk. -In this case an extra "`MAY_NOT_BLOCK`" flag is passed so that it -knows not to sleep, but to return `-ECHILD` if it cannot complete -promptly. `i_op->permission` is given the inode pointer, not the +- the ``i_op->permission`` interface might be called during RCU-walk. +In this case an extra "``MAY_NOT_BLOCK``" flag is passed so that it +knows not to sleep, but to return ``-ECHILD`` if it cannot complete +promptly. ``i_op->permission`` is given the inode pointer, not the dentry, so it doesn't need to worry about further consistency checks. However if it accesses any other filesystem data structures, it must -ensure they are safe to be accessed with only the `rcu_read_lock()` -held. This typically means they must be freed using `kfree_rcu()` or +ensure they are safe to be accessed with only the ``rcu_read_lock()`` +held. This typically means they must be freed using ``kfree_rcu()`` or similar. -[`READ_ONCE()`]: https://lwn.net/Articles/624126/ +.. _READ_ONCE: https://lwn.net/Articles/624126/ If the filesystem may need to revalidate dcache entries, then -`d_op->d_revalidate` may be called in RCU-walk too. This interface -*is* passed the dentry but does not have access to the `inode` or the -`seq` number from the `nameidata`, so it needs to be extra careful +``d_op->d_revalidate`` may be called in RCU-walk too. This interface +*is* passed the dentry but does not have access to the ``inode`` or the +``seq`` number from the ``nameidata``, so it needs to be extra careful when accessing fields in the dentry. This "extra care" typically -involves using [`READ_ONCE()`] to access fields, and verifying the +involves using `READ_ONCE() <READ_ONCE_>`_ to access fields, and verifying the result is not NULL before using it. This pattern can be seen in -`nfs_lookup_revalidate()`. +``nfs_lookup_revalidate()``. A pair of patterns ------------------ @@ -839,14 +885,14 @@ being aware of. The first is "try quickly and check, if that fails try slowly". We can see that in the high-level approach of first trying RCU-walk and -then trying REF-walk, and in places where `unlazy_walk()` is used to +then trying REF-walk, and in places where ``unlazy_walk()`` is used to switch to REF-walk for the rest of the path. We also saw it earlier -in `dget_parent()` when following a "`..`" link. It tries a quick way +in ``dget_parent()`` when following a "``..``" link. It tries a quick way to get a reference, then falls back to taking locks if needed. The second pattern is "try quickly and check, if that fails try -again - repeatedly". This is seen with the use of `rename_lock` and -`mount_lock` in REF-walk. RCU-walk doesn't make use of this pattern - +again - repeatedly". This is seen with the use of ``rename_lock`` and +``mount_lock`` in REF-walk. RCU-walk doesn't make use of this pattern - if anything goes wrong it is much safer to just abort and try a more sedate approach. @@ -882,8 +928,8 @@ Conceptually, symbolic links could be handled by editing the path. If a component name refers to a symbolic link, then that component is replaced by the body of the link and, if that body starts with a '/', then all preceding parts of the path are discarded. This is what the -"`readlink -f`" command does, though it also edits out "`.`" and -"`..`" components. +"``readlink -f``" command does, though it also edits out "``.``" and +"``..``" components. Directly editing the path string is not really necessary when looking up a path, and discarding early components is pointless as they aren't @@ -899,19 +945,19 @@ There are two reasons for placing limits on how many symlinks can occur in a single path lookup. The most obvious is to avoid loops. If a symlink referred to itself either directly or through intermediaries, then following the symlink can never complete -successfully - the error `ELOOP` must be returned. Loops can be +successfully - the error ``ELOOP`` must be returned. Loops can be detected without imposing limits, but limits are the simplest solution and, given the second reason for restriction, quite sufficient. -[outlined recently]: http://thread.gmane.org/gmane.linux.kernel/1934390/focus=1934550 +.. _outlined recently: http://thread.gmane.org/gmane.linux.kernel/1934390/focus=1934550 -The second reason was [outlined recently] by Linus: +The second reason was `outlined recently`_ by Linus: -> Because it's a latency and DoS issue too. We need to react well to -> true loops, but also to "very deep" non-loops. It's not about memory -> use, it's about users triggering unreasonable CPU resources. + Because it's a latency and DoS issue too. We need to react well to + true loops, but also to "very deep" non-loops. It's not about memory + use, it's about users triggering unreasonable CPU resources. -Linux imposes a limit on the length of any pathname: `PATH_MAX`, which +Linux imposes a limit on the length of any pathname: ``PATH_MAX``, which is 4096. There are a number of reasons for this limit; not letting the kernel spend too much time on just one path is one of them. With symbolic links you can effectively generate much longer paths so some @@ -921,7 +967,7 @@ further limit of eight on the maximum depth of recursion, but that was raised to 40 when a separate stack was implemented, so there is now just the one limit. -The `nameidata` structure that we met in an earlier article contains a +The ``nameidata`` structure that we met in an earlier article contains a small stack that can be used to store the remaining part of up to two symlinks. In many cases this will be sufficient. If it isn't, a separate stack is allocated with room for 40 symlinks. Pathname @@ -941,13 +987,13 @@ to external storage. It is particularly important for RCU-walk to be able to find and temporarily hold onto these cached entries, so that it doesn't need to drop down into REF-walk. -[object-oriented design pattern]: https://lwn.net/Articles/446317/ +.. _object-oriented design pattern: https://lwn.net/Articles/446317/ While each filesystem is free to make its own choice, symlinks are typically stored in one of two places. Short symlinks are often -stored directly in the inode. When a filesystem allocates a `struct -inode` it typically allocates extra space to store private data (a -common [object-oriented design pattern] in the kernel). This will +stored directly in the inode. When a filesystem allocates a ``struct +inode`` it typically allocates extra space to store private data (a +common `object-oriented design pattern`_ in the kernel). This will sometimes include space for a symlink. The other common location is in the page cache, which normally stores the content of files. The pathname in a symlink can be seen as the content of that symlink and @@ -962,13 +1008,13 @@ the inode which, itself, is protected by RCU or by a counted reference on the dentry. This means that the mechanisms that pathname lookup uses to access the dcache and icache (inode cache) safely are quite sufficient for accessing some cached symlinks safely. In these cases, -the `i_link` pointer in the inode is set to point to wherever the +the ``i_link`` pointer in the inode is set to point to wherever the symlink is stored and it can be accessed directly whenever needed. When the symlink is stored in the page cache or elsewhere, the situation is not so straightforward. A reference on a dentry or even on an inode does not imply any reference on cached pages of that -inode, and even an `rcu_read_lock()` is not sufficient to ensure that +inode, and even an ``rcu_read_lock()`` is not sufficient to ensure that a page will not disappear. So for these symlinks the pathname lookup code needs to ask the filesystem to provide a stable reference and, significantly, needs to release that reference when it is finished @@ -978,48 +1024,48 @@ Taking a reference to a cache page is often possible even in RCU-walk mode. It does require making changes to memory, which is best avoided, but that isn't necessarily a big cost and it is better than dropping out of RCU-walk mode completely. Even filesystems that allocate -space to copy the symlink into can use `GFP_ATOMIC` to often successfully +space to copy the symlink into can use ``GFP_ATOMIC`` to often successfully allocate memory without the need to drop out of RCU-walk. If a filesystem cannot successfully get a reference in RCU-walk mode, it -must return `-ECHILD` and `unlazy_walk()` will be called to return to +must return ``-ECHILD`` and ``unlazy_walk()`` will be called to return to REF-walk mode in which the filesystem is allowed to sleep. -The place for all this to happen is the `i_op->follow_link()` inode +The place for all this to happen is the ``i_op->follow_link()`` inode method. In the present mainline code this is never actually called in RCU-walk mode as the rewrite is not quite complete. It is likely that -in a future release this method will be passed an `inode` pointer when +in a future release this method will be passed an ``inode`` pointer when called in RCU-walk mode so it both (1) knows to be careful, and (2) has the -validated pointer. Much like the `i_op->permission()` method we -looked at previously, `->follow_link()` would need to be careful that +validated pointer. Much like the ``i_op->permission()`` method we +looked at previously, ``->follow_link()`` would need to be careful that all the data structures it references are safe to be accessed while holding no counted reference, only the RCU lock. Though getting a -reference with `->follow_link()` is not yet done in RCU-walk mode, the +reference with ``->follow_link()`` is not yet done in RCU-walk mode, the code is ready to release the reference when that does happen. This need to drop the reference to a symlink adds significant complexity. It requires a reference to the inode so that the -`i_op->put_link()` inode operation can be called. In REF-walk, that +``i_op->put_link()`` inode operation can be called. In REF-walk, that reference is kept implicitly through a reference to the dentry, so -keeping the `struct path` of the symlink is easiest. For RCU-walk, +keeping the ``struct path`` of the symlink is easiest. For RCU-walk, the pointer to the inode is kept separately. To allow switching from RCU-walk back to REF-walk in the middle of processing nested symlinks we also need the seq number for the dentry so we can confirm that switching back was safe. Finally, when providing a reference to a symlink, the filesystem also -provides an opaque "cookie" that must be passed to `->put_link()` so that it +provides an opaque "cookie" that must be passed to ``->put_link()`` so that it knows what to free. This might be the allocated memory area, or a -pointer to the `struct page` in the page cache, or something else +pointer to the ``struct page`` in the page cache, or something else completely. Only the filesystem knows what it is. In order for the reference to each symlink to be dropped when the walk completes, whether in RCU-walk or REF-walk, the symlink stack needs to contain, along with the path remnants: -- the `struct path` to provide a reference to the inode in REF-walk -- the `struct inode *` to provide a reference to the inode in RCU-walk -- the `seq` to allow the path to be safely switched from RCU-walk to REF-walk -- the `cookie` that tells `->put_path()` what to put. +- the ``struct path`` to provide a reference to the inode in REF-walk +- the ``struct inode *`` to provide a reference to the inode in RCU-walk +- the ``seq`` to allow the path to be safely switched from RCU-walk to REF-walk +- the ``cookie`` that tells ``->put_path()`` what to put. This means that each entry in the symlink stack needs to hold five pointers and an integer instead of just one pointer (the path @@ -1028,28 +1074,28 @@ with 40 entries it adds up to 1600 bytes total, which is less than half a page. So it might seem like a lot, but is by no means excessive. -Note that, in a given stack frame, the path remnant (`name`) is not +Note that, in a given stack frame, the path remnant (``name``) is not part of the symlink that the other fields refer to. It is the remnant to be followed once that symlink has been fully parsed. Following the symlink --------------------- -The main loop in `link_path_walk()` iterates seamlessly over all +The main loop in ``link_path_walk()`` iterates seamlessly over all components in the path and all of the non-final symlinks. As symlinks -are processed, the `name` pointer is adjusted to point to a new +are processed, the ``name`` pointer is adjusted to point to a new symlink, or is restored from the stack, so that much of the loop -doesn't need to notice. Getting this `name` variable on and off the +doesn't need to notice. Getting this ``name`` variable on and off the stack is very straightforward; pushing and popping the references is a little more complex. -When a symlink is found, `walk_component()` returns the value `1` -(`0` is returned for any other sort of success, and a negative number -is, as usual, an error indicator). This causes `get_link()` to be +When a symlink is found, ``walk_component()`` returns the value ``1`` +(``0`` is returned for any other sort of success, and a negative number +is, as usual, an error indicator). This causes ``get_link()`` to be called; it then gets the link from the filesystem. Providing that -operation is successful, the old path `name` is placed on the stack, -and the new value is used as the `name` for a while. When the end of -the path is found (i.e. `*name` is `'\0'`) the old `name` is restored +operation is successful, the old path ``name`` is placed on the stack, +and the new value is used as the ``name`` for a while. When the end of +the path is found (i.e. ``*name`` is ``'\0'``) the old ``name`` is restored off the stack and path walking continues. Pushing and popping the reference pointers (inode, cookie, etc.) is more @@ -1060,113 +1106,114 @@ the symlink-just-found to avoid leaving empty path remnants that would just get in the way. It is most convenient to push the new symlink references onto the -stack in `walk_component()` immediately when the symlink is found; -`walk_component()` is also the last piece of code that needs to look at the +stack in ``walk_component()`` immediately when the symlink is found; +``walk_component()`` is also the last piece of code that needs to look at the old symlink as it walks that last component. So it is quite -convenient for `walk_component()` to release the old symlink and pop +convenient for ``walk_component()`` to release the old symlink and pop the references just before pushing the reference information for the -new symlink. It is guided in this by two flags; `WALK_GET`, which +new symlink. It is guided in this by two flags; ``WALK_GET``, which gives it permission to follow a symlink if it finds one, and -`WALK_PUT`, which tells it to release the current symlink after it has been -followed. `WALK_PUT` is tested first, leading to a call to -`put_link()`. `WALK_GET` is tested subsequently (by -`should_follow_link()`) leading to a call to `pick_link()` which sets +``WALK_PUT``, which tells it to release the current symlink after it has been +followed. ``WALK_PUT`` is tested first, leading to a call to +``put_link()``. ``WALK_GET`` is tested subsequently (by +``should_follow_link()``) leading to a call to ``pick_link()`` which sets up the stack frame. -### Symlinks with no final component ### +Symlinks with no final component +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A pair of special-case symlinks deserve a little further explanation. -Both result in a new `struct path` (with mount and dentry) being set -up in the `nameidata`, and result in `get_link()` returning `NULL`. +Both result in a new ``struct path`` (with mount and dentry) being set +up in the ``nameidata``, and result in ``get_link()`` returning ``NULL``. -The more obvious case is a symlink to "`/`". All symlinks starting -with "`/`" are detected in `get_link()` which resets the `nameidata` +The more obvious case is a symlink to "``/``". All symlinks starting +with "``/``" are detected in ``get_link()`` which resets the ``nameidata`` to point to the effective filesystem root. If the symlink only -contains "`/`" then there is nothing more to do, no components at all, -so `NULL` is returned to indicate that the symlink can be released and +contains "``/``" then there is nothing more to do, no components at all, +so ``NULL`` is returned to indicate that the symlink can be released and the stack frame discarded. -The other case involves things in `/proc` that look like symlinks but -aren't really. +The other case involves things in ``/proc`` that look like symlinks but +aren't really:: -> $ ls -l /proc/self/fd/1 -> lrwx------ 1 neilb neilb 64 Jun 13 10:19 /proc/self/fd/1 -> /dev/pts/4 + $ ls -l /proc/self/fd/1 + lrwx------ 1 neilb neilb 64 Jun 13 10:19 /proc/self/fd/1 -> /dev/pts/4 -Every open file descriptor in any process is represented in `/proc` by +Every open file descriptor in any process is represented in ``/proc`` by something that looks like a symlink. It is really a reference to the -target file, not just the name of it. When you `readlink` these +target file, not just the name of it. When you ``readlink`` these objects you get a name that might refer to the same file - unless it -has been unlinked or mounted over. When `walk_component()` follows -one of these, the `->follow_link()` method in "procfs" doesn't return -a string name, but instead calls `nd_jump_link()` which updates the -`nameidata` in place to point to that target. `->follow_link()` then -returns `NULL`. Again there is no final component and `get_link()` -reports this by leaving the `last_type` field of `nameidata` as -`LAST_BIND`. +has been unlinked or mounted over. When ``walk_component()`` follows +one of these, the ``->follow_link()`` method in "procfs" doesn't return +a string name, but instead calls ``nd_jump_link()`` which updates the +``nameidata`` in place to point to that target. ``->follow_link()`` then +returns ``NULL``. Again there is no final component and ``get_link()`` +reports this by leaving the ``last_type`` field of ``nameidata`` as +``LAST_BIND``. Following the symlink in the final component -------------------------------------------- -All this leads to `link_path_walk()` walking down every component, and +All this leads to ``link_path_walk()`` walking down every component, and following all symbolic links it finds, until it reaches the final -component. This is just returned in the `last` field of `nameidata`. +component. This is just returned in the ``last`` field of ``nameidata``. For some callers, this is all they need; they want to create that -`last` name if it doesn't exist or give an error if it does. Other +``last`` name if it doesn't exist or give an error if it does. Other callers will want to follow a symlink if one is found, and possibly apply special handling to the last component of that symlink, rather than just the last component of the original file name. These callers -potentially need to call `link_path_walk()` again and again on +potentially need to call ``link_path_walk()`` again and again on successive symlinks until one is found that doesn't point to another symlink. -This case is handled by the relevant caller of `link_path_walk()`, such as -`path_lookupat()` using a loop that calls `link_path_walk()`, and then +This case is handled by the relevant caller of ``link_path_walk()``, such as +``path_lookupat()`` using a loop that calls ``link_path_walk()``, and then handles the final component. If the final component is a symlink -that needs to be followed, then `trailing_symlink()` is called to set -things up properly and the loop repeats, calling `link_path_walk()` +that needs to be followed, then ``trailing_symlink()`` is called to set +things up properly and the loop repeats, calling ``link_path_walk()`` again. This could loop as many as 40 times if the last component of each symlink is another symlink. The various functions that examine the final component and possibly -report that it is a symlink are `lookup_last()`, `mountpoint_last()` -and `do_last()`, each of which use the same convention as -`walk_component()` of returning `1` if a symlink was found that needs +report that it is a symlink are ``lookup_last()``, ``mountpoint_last()`` +and ``do_last()``, each of which use the same convention as +``walk_component()`` of returning ``1`` if a symlink was found that needs to be followed. -Of these, `do_last()` is the most interesting as it is used for -opening a file. Part of `do_last()` runs with `i_mutex` held and this -part is in a separate function: `lookup_open()`. +Of these, ``do_last()`` is the most interesting as it is used for +opening a file. Part of ``do_last()`` runs with ``i_rwsem`` held and this +part is in a separate function: ``lookup_open()``. -Explaining `do_last()` completely is beyond the scope of this article, +Explaining ``do_last()`` completely is beyond the scope of this article, but a few highlights should help those interested in exploring the code. -1. Rather than just finding the target file, `do_last()` needs to open - it. If the file was found in the dcache, then `vfs_open()` is used for - this. If not, then `lookup_open()` will either call `atomic_open()` (if - the filesystem provides it) to combine the final lookup with the open, or - will perform the separate `lookup_real()` and `vfs_create()` steps - directly. In the later case the actual "open" of this newly found or - created file will be performed by `vfs_open()`, just as if the name - were found in the dcache. - -2. `vfs_open()` can fail with `-EOPENSTALE` if the cached information - wasn't quite current enough. Rather than restarting the lookup from - the top with `LOOKUP_REVAL` set, `lookup_open()` is called instead, - giving the filesystem a chance to resolve small inconsistencies. - If that doesn't work, only then is the lookup restarted from the top. +1. Rather than just finding the target file, ``do_last()`` needs to open + it. If the file was found in the dcache, then ``vfs_open()`` is used for + this. If not, then ``lookup_open()`` will either call ``atomic_open()`` (if + the filesystem provides it) to combine the final lookup with the open, or + will perform the separate ``lookup_real()`` and ``vfs_create()`` steps + directly. In the later case the actual "open" of this newly found or + created file will be performed by ``vfs_open()``, just as if the name + were found in the dcache. + +2. ``vfs_open()`` can fail with ``-EOPENSTALE`` if the cached information + wasn't quite current enough. Rather than restarting the lookup from + the top with ``LOOKUP_REVAL`` set, ``lookup_open()`` is called instead, + giving the filesystem a chance to resolve small inconsistencies. + If that doesn't work, only then is the lookup restarted from the top. 3. An open with O_CREAT **does** follow a symlink in the final component, - unlike other creation system calls (like `mkdir`). So the sequence: + unlike other creation system calls (like ``mkdir``). So the sequence:: - > ln -s bar /tmp/foo - > echo hello > /tmp/foo + ln -s bar /tmp/foo + echo hello > /tmp/foo - will create a file called `/tmp/bar`. This is not permitted if - `O_EXCL` is set but otherwise is handled for an O_CREAT open much - like for a non-creating open: `should_follow_link()` returns `1`, and - so does `do_last()` so that `trailing_symlink()` gets called and the - open process continues on the symlink that was found. + will create a file called ``/tmp/bar``. This is not permitted if + ``O_EXCL`` is set but otherwise is handled for an O_CREAT open much + like for a non-creating open: ``should_follow_link()`` returns ``1``, and + so does ``do_last()`` so that ``trailing_symlink()`` gets called and the + open process continues on the symlink that was found. Updating the access time ------------------------ @@ -1180,110 +1227,112 @@ footprints are best kept to a minimum. One other place where walking down a symlink can involve leaving footprints in a way that doesn't affect directories is in updating access times. In Unix (and Linux) every filesystem object has a "last accessed -time", or "`atime`". Passing through a directory to access a file +time", or "``atime``". Passing through a directory to access a file within is not considered to be an access for the purposes of -`atime`; only listing the contents of a directory can update its `atime`. -Symlinks are different it seems. Both reading a symlink (with `readlink()`) +``atime``; only listing the contents of a directory can update its ``atime``. +Symlinks are different it seems. Both reading a symlink (with ``readlink()``) and looking up a symlink on the way to some other destination can update the atime on that symlink. -[clearest statement]: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_08 +.. _clearest statement: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_08 It is not clear why this is the case; POSIX has little to say on the -subject. The [clearest statement] is that, if a particular implementation +subject. The `clearest statement`_ is that, if a particular implementation updates a timestamp in a place not specified by POSIX, this must be documented "except that any changes caused by pathname resolution need not be documented". This seems to imply that POSIX doesn't really care about access-time updates during pathname lookup. -[Linux 1.3.87]: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/diff/fs/ext2/symlink.c?id=f806c6db77b8eaa6e00dcfb6b567706feae8dbb8 +.. _Linux 1.3.87: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/diff/fs/ext2/symlink.c?id=f806c6db77b8eaa6e00dcfb6b567706feae8dbb8 -An examination of history shows that prior to [Linux 1.3.87], the ext2 +An examination of history shows that prior to `Linux 1.3.87`_, the ext2 filesystem, at least, didn't update atime when following a link. Unfortunately we have no record of why that behavior was changed. In any case, access time must now be updated and that operation can be quite complex. Trying to stay in RCU-walk while doing it is best -avoided. Fortunately it is often permitted to skip the `atime` -update. Because `atime` updates cause performance problems in various -areas, Linux supports the `relatime` mount option, which generally -limits the updates of `atime` to once per day on files that aren't +avoided. Fortunately it is often permitted to skip the ``atime`` +update. Because ``atime`` updates cause performance problems in various +areas, Linux supports the ``relatime`` mount option, which generally +limits the updates of ``atime`` to once per day on files that aren't being changed (and symlinks never change once created). Even without -`relatime`, many filesystems record `atime` with a one-second +``relatime``, many filesystems record ``atime`` with a one-second granularity, so only one update per second is required. -It is easy to test if an `atime` update is needed while in RCU-walk +It is easy to test if an ``atime`` update is needed while in RCU-walk mode and, if it isn't, the update can be skipped and RCU-walk mode -continues. Only when an `atime` update is actually required does the +continues. Only when an ``atime`` update is actually required does the path walk drop down to REF-walk. All of this is handled in the -`get_link()` function. +``get_link()`` function. A few flags ----------- A suitable way to wrap up this tour of pathname walking is to list -the various flags that can be stored in the `nameidata` to guide the +the various flags that can be stored in the ``nameidata`` to guide the lookup process. Many of these are only meaningful on the final component, others reflect the current state of the pathname lookup. -And then there is `LOOKUP_EMPTY`, which doesn't fit conceptually with +And then there is ``LOOKUP_EMPTY``, which doesn't fit conceptually with the others. If this is not set, an empty pathname causes an error very early on. If it is set, empty pathnames are not considered to be an error. -### Global state flags ### +Global state flags +~~~~~~~~~~~~~~~~~~ -We have already met two global state flags: `LOOKUP_RCU` and -`LOOKUP_REVAL`. These select between one of three overall approaches +We have already met two global state flags: ``LOOKUP_RCU`` and +``LOOKUP_REVAL``. These select between one of three overall approaches to lookup: RCU-walk, REF-walk, and REF-walk with forced revalidation. -`LOOKUP_PARENT` indicates that the final component hasn't been reached +``LOOKUP_PARENT`` indicates that the final component hasn't been reached yet. This is primarily used to tell the audit subsystem the full context of a particular access being audited. -`LOOKUP_ROOT` indicates that the `root` field in the `nameidata` was +``LOOKUP_ROOT`` indicates that the ``root`` field in the ``nameidata`` was provided by the caller, so it shouldn't be released when it is no longer needed. -`LOOKUP_JUMPED` means that the current dentry was chosen not because +``LOOKUP_JUMPED`` means that the current dentry was chosen not because it had the right name but for some other reason. This happens when -following "`..`", following a symlink to `/`, crossing a mount point -or accessing a "`/proc/$PID/fd/$FD`" symlink. In this case the +following "``..``", following a symlink to ``/``, crossing a mount point +or accessing a "``/proc/$PID/fd/$FD``" symlink. In this case the filesystem has not been asked to revalidate the name (with -`d_revalidate()`). In such cases the inode may still need to be -revalidated, so `d_op->d_weak_revalidate()` is called if -`LOOKUP_JUMPED` is set when the look completes - which may be at the +``d_revalidate()``). In such cases the inode may still need to be +revalidated, so ``d_op->d_weak_revalidate()`` is called if +``LOOKUP_JUMPED`` is set when the look completes - which may be at the final component or, when creating, unlinking, or renaming, at the penultimate component. -### Final-component flags ### +Final-component flags +~~~~~~~~~~~~~~~~~~~~~ Some of these flags are only set when the final component is being considered. Others are only checked for when considering that final component. -`LOOKUP_AUTOMOUNT` ensures that, if the final component is an automount +``LOOKUP_AUTOMOUNT`` ensures that, if the final component is an automount point, then the mount is triggered. Some operations would trigger it -anyway, but operations like `stat()` deliberately don't. `statfs()` -needs to trigger the mount but otherwise behaves a lot like `stat()`, so -it sets `LOOKUP_AUTOMOUNT`, as does "`quotactl()`" and the handling of -"`mount --bind`". +anyway, but operations like ``stat()`` deliberately don't. ``statfs()`` +needs to trigger the mount but otherwise behaves a lot like ``stat()``, so +it sets ``LOOKUP_AUTOMOUNT``, as does "``quotactl()``" and the handling of +"``mount --bind``". -`LOOKUP_FOLLOW` has a similar function to `LOOKUP_AUTOMOUNT` but for +``LOOKUP_FOLLOW`` has a similar function to ``LOOKUP_AUTOMOUNT`` but for symlinks. Some system calls set or clear it implicitly, while -others have API flags such as `AT_SYMLINK_FOLLOW` and -`UMOUNT_NOFOLLOW` to control it. Its effect is similar to -`WALK_GET` that we already met, but it is used in a different way. +others have API flags such as ``AT_SYMLINK_FOLLOW`` and +``UMOUNT_NOFOLLOW`` to control it. Its effect is similar to +``WALK_GET`` that we already met, but it is used in a different way. -`LOOKUP_DIRECTORY` insists that the final component is a directory. +``LOOKUP_DIRECTORY`` insists that the final component is a directory. Various callers set this and it is also set when the final component is found to be followed by a slash. -Finally `LOOKUP_OPEN`, `LOOKUP_CREATE`, `LOOKUP_EXCL`, and -`LOOKUP_RENAME_TARGET` are not used directly by the VFS but are made -available to the filesystem and particularly the `->d_revalidate()` +Finally ``LOOKUP_OPEN``, ``LOOKUP_CREATE``, ``LOOKUP_EXCL``, and +``LOOKUP_RENAME_TARGET`` are not used directly by the VFS but are made +available to the filesystem and particularly the ``->d_revalidate()`` method. A filesystem can choose not to bother revalidating too hard if it knows that it will be asked to open or create the file soon. -These flags were previously useful for `->lookup()` too but with the -introduction of `->atomic_open()` they are less relevant there. +These flags were previously useful for ``->lookup()`` too but with the +introduction of ``->atomic_open()`` they are less relevant there. End of the road --------------- diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 12a5e6e693b6..66cad5c86171 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -125,6 +125,13 @@ process running on the system, which is named after the process ID (PID). The link self points to the process reading the file system. Each process subdirectory has the entries listed in Table 1-1. +Note that an open a file descriptor to /proc/<pid> or to any of its +contained files or subdirectories does not prevent <pid> being reused +for some other process in the event that <pid> exits. Operations on +open /proc/<pid> file descriptors corresponding to dead processes +never act on any new process that the kernel may, through chance, have +also assigned the process ID <pid>. Instead, operations on these FDs +usually fail with ESRCH. Table 1-1: Process specific entries in /proc .............................................................................. @@ -182,6 +189,7 @@ read the file /proc/PID/status: VmSwap: 0 kB HugetlbPages: 0 kB CoreDumping: 0 + THP_enabled: 1 Threads: 1 SigQ: 0/28578 SigPnd: 0000000000000000 @@ -193,8 +201,10 @@ read the file /proc/PID/status: CapPrm: 0000000000000000 CapEff: 0000000000000000 CapBnd: ffffffffffffffff + CapAmb: 0000000000000000 NoNewPrivs: 0 Seccomp: 0 + Speculation_Store_Bypass: thread vulnerable voluntary_ctxt_switches: 0 nonvoluntary_ctxt_switches: 1 @@ -214,7 +224,7 @@ asynchronous manner and the value may not be very precise. To see a precise snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table. It's slow but very precise. -Table 1-2: Contents of the status files (as of 4.8) +Table 1-2: Contents of the status files (as of 4.19) .............................................................................. Field Content Name filename of the executable @@ -256,6 +266,8 @@ Table 1-2: Contents of the status files (as of 4.8) HugetlbPages size of hugetlb memory portions CoreDumping process's memory is currently being dumped (killing the process may lead to a corrupted core) + THP_enabled process is allowed to use THP (returns 0 when + PR_SET_THP_DISABLE is set on the process Threads number of threads SigQ number of signals queued/max. number for queue SigPnd bitmap of pending signals for the thread @@ -267,8 +279,10 @@ Table 1-2: Contents of the status files (as of 4.8) CapPrm bitmap of permitted capabilities CapEff bitmap of effective capabilities CapBnd bitmap of capabilities bounding set + CapAmb bitmap of ambient capabilities NoNewPrivs no_new_privs, like prctl(PR_GET_NO_NEW_PRIV, ...) Seccomp seccomp mode, like prctl(PR_GET_SECCOMP, ...) + Speculation_Store_Bypass speculative store bypass mitigation status Cpus_allowed mask of CPUs on which this process may run Cpus_allowed_list Same as previous, but in "list format" Mems_allowed mask of memory nodes allowed to this process @@ -425,6 +439,7 @@ SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB +THPeligible: 0 VmFlags: rd ex mr mw me dw the first of these lines shows the same information as is displayed for the @@ -462,6 +477,8 @@ replaced by copy-on-write) part of the underlying shmem object out on swap. "SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this does not take into account swapped out page of underlying shmem objects. "Locked" indicates whether the mapping is locked in memory or not. +"THPeligible" indicates whether the mapping is eligible for THP pages - 1 if +true, 0 otherwise. "VmFlags" field deserves a separate description. This member represents the kernel flags associated with the particular virtual memory area in two letter encoded @@ -496,7 +513,9 @@ manner. The codes are the following: Note that there is no guarantee that every flag and associated mnemonic will be present in all further kernel releases. Things get changed, the flags may -be vanished or the reverse -- new added. +be vanished or the reverse -- new added. Interpretation of their meaning +might change in future as well. So each consumer of these flags has to +follow each specific kernel version for the exact semantic. This file is only present if the CONFIG_MMU kernel configuration option is enabled. diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt index 4f3d6a882bdc..48ea68f15845 100644 --- a/Documentation/filesystems/qnx6.txt +++ b/Documentation/filesystems/qnx6.txt @@ -87,7 +87,7 @@ addressed with 16 direct blocks. For more than 16 blocks an indirect addressing in form of another tree is used. (scheme is the same as the one used for the superblock root nodes) -The filesize is stored 64bit. Inode counting starts with 1. (whilst long +The filesize is stored 64bit. Inode counting starts with 1. (while long filename inodes start with 0) Directories @@ -155,7 +155,7 @@ Then userspace. The requirement for a static, fixed preallocated system area comes from how qnx6fs deals with writes. Each superblock got it's own half of the system area. So superblock #1 -always uses blocks from the lower half whilst superblock #2 just writes to +always uses blocks from the lower half while superblock #2 just writes to blocks represented by the upper half bitmap system area bits. Bitmap blocks, Inode blocks and indirect addressing blocks for those two diff --git a/Documentation/filesystems/spufs.txt b/Documentation/filesystems/spufs.txt index 1343d118a9b2..eb9e3aa63026 100644 --- a/Documentation/filesystems/spufs.txt +++ b/Documentation/filesystems/spufs.txt @@ -452,7 +452,7 @@ RETURN VALUE ERRORS - EACCESS + EACCES The current user does not have write access on the spufs mount point. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 5f71a252e2e0..8dc8e9c2913f 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -1131,7 +1131,7 @@ struct dentry_operations { d_manage: called to allow the filesystem to manage the transition from a dentry (optional). This allows autofs, for example, to hold up clients - waiting to explore behind a 'mountpoint' whilst letting the daemon go + waiting to explore behind a 'mountpoint' while letting the daemon go past and construct the subtree there. 0 should be returned to let the calling process continue. -EISDIR can be returned to tell pathwalk to use this directory as an ordinary directory and to ignore anything diff --git a/Documentation/filesystems/xfs-self-describing-metadata.txt b/Documentation/filesystems/xfs-self-describing-metadata.txt index 05aa455163e3..68604e67a495 100644 --- a/Documentation/filesystems/xfs-self-describing-metadata.txt +++ b/Documentation/filesystems/xfs-self-describing-metadata.txt @@ -110,7 +110,7 @@ owner field in the metadata object, we can immediately do top down validation to determine the scope of the problem. Different types of metadata have different owner identifiers. For example, -directory, attribute and extent tree blocks are all owned by an inode, whilst +directory, attribute and extent tree blocks are all owned by an inode, while freespace btree blocks are owned by an allocation group. Hence the size and contents of the owner field are determined by the type of metadata object we are looking at. The owner information can also identify misplaced writes (e.g. diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index a9ae82fb9d13..9ccfd1bc6201 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -417,7 +417,7 @@ level directory: filesystem from ever unmounting fully in the case of "retry forever" handler configurations. - Note: there is no guarantee that fail_at_unmount can be set whilst an + Note: there is no guarantee that fail_at_unmount can be set while an unmount is in progress. It is possible that the sysfs entries are removed by the unmounting filesystem before a "retry forever" error handler configuration causes unmount to hang, and hence the filesystem diff --git a/Documentation/gpu/amdgpu-dc.rst b/Documentation/gpu/amdgpu-dc.rst new file mode 100644 index 000000000000..cc89b0fc11df --- /dev/null +++ b/Documentation/gpu/amdgpu-dc.rst @@ -0,0 +1,68 @@ +=================================== +drm/amd/display - Display Core (DC) +=================================== + +*placeholder - general description of supported platforms, what dc is, etc.* + +Because it is partially shared with other operating systems, the Display Core +Driver is divided in two pieces. + +1. **Display Core (DC)** contains the OS-agnostic components. Things like + hardware programming and resource management are handled here. +2. **Display Manager (DM)** contains the OS-dependent components. Hooks to the + amdgpu base driver and DRM are implemented here. + +It doesn't help that the entire package is frequently referred to as DC. But +with the context in mind, it should be clear. + +When CONFIG_DRM_AMD_DC is enabled, DC will be initialized by default for +supported ASICs. To force disable, set `amdgpu.dc=0` on kernel command line. +Likewise, to force enable on unsupported ASICs, set `amdgpu.dc=1`. + +To determine if DC is loaded, search dmesg for the following entry: + +``Display Core initialized with <version number here>`` + +AMDgpu Display Manager +====================== + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h + :internal: + +Lifecycle +--------- + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :doc: DM Lifecycle + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :functions: dm_hw_init dm_hw_fini + +Interrupts +---------- + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c + :internal: + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :functions: register_hpd_handlers dm_crtc_high_irq dm_pflip_high_irq + +Atomic Implementation +--------------------- + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :doc: atomic + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :functions: amdgpu_dm_atomic_check amdgpu_dm_atomic_commit_tail + +Display Core +============ + +**WIP** diff --git a/Documentation/gpu/drivers.rst b/Documentation/gpu/drivers.rst index 7d2d3875ff1a..7c1672118a73 100644 --- a/Documentation/gpu/drivers.rst +++ b/Documentation/gpu/drivers.rst @@ -5,6 +5,7 @@ GPU Driver Documentation .. toctree:: amdgpu + amdgpu-dc i915 meson pl111 diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index f9cfcdcdf024..b422eb8edf16 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -59,19 +59,28 @@ Implementing Asynchronous Atomic Commit .. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c :doc: implementing nonblocking commit +Helper Functions Reference +-------------------------- + +.. kernel-doc:: include/drm/drm_atomic_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c + :export: + Atomic State Reset and Initialization ------------------------------------- -.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_atomic_state_helper.c :doc: atomic state reset and initialization -Helper Functions Reference --------------------------- +Atomic State Helper Reference +----------------------------- -.. kernel-doc:: include/drm/drm_atomic_helper.h +.. kernel-doc:: include/drm/drm_atomic_state_helper.h :internal: -.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_atomic_state_helper.c :export: Simple KMS Helper Reference @@ -223,6 +232,18 @@ MIPI DSI Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_mipi_dsi.c :export: +Display Stream Compression Helper Functions Reference +===================================================== + +.. kernel-doc:: drivers/gpu/drm/drm_dsc.c + :doc: dsc helpers + +.. kernel-doc:: include/drm/drm_dsc.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_dsc.c + :export: + Output Probing Helper Functions Reference ========================================= diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 4b1501b4835b..75c882e09fee 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -554,6 +554,18 @@ Plane Composition Properties .. kernel-doc:: drivers/gpu/drm/drm_blend.c :export: +FB_DAMAGE_CLIPS +~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c + :export: + +.. kernel-doc:: include/drm/drm_damage_helper.h + :internal: + Color Management Properties --------------------------- @@ -575,6 +587,13 @@ Explicit Fencing Properties .. kernel-doc:: drivers/gpu/drm/drm_atomic_uapi.c :doc: explicit fencing properties + +Variable Refresh Properties +--------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_connector.c + :doc: Variable refresh properties + Existing KMS Properties ----------------------- diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index e725e8449e72..54a696d961a7 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -72,16 +72,13 @@ object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, driver-specific init and release functions may -be provided, likely eventually calling ttm_bo_global_init() and -ttm_bo_global_release(), respectively. Also, like the previous +be provided, likely eventually calling ttm_bo_global_ref_init() and +ttm_bo_global_ref_release(), respectively. Also, like the previous object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. See the radeon_ttm.c file for an example of usage. -.. kernel-doc:: drivers/gpu/drm/drm_global.c - :export: - The Graphics Execution Manager (GEM) ==================================== diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index a2214cc1f821..a752aa561ea4 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -190,13 +190,16 @@ ENOSPC: Simply running out of kernel/system memory is signalled through ENOMEM. -EPERM/EACCESS: +EPERM/EACCES: Returned for an operation that is valid, but needs more privileges. E.g. root-only or much more common, DRM master-only operations return this when when called by unpriviledged clients. There's no clear - difference between EACCESS and EPERM. + difference between EACCES and EPERM. ENODEV: + The device is not (yet) present or fully initialized. + +EOPNOTSUPP: Feature (like PRIME, modesetting, GEM) is not supported by the driver. ENXIO: diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 77c2b3c25565..14191b64446d 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -28,22 +28,16 @@ them, but also all the virtual ones used by KVM, so everyone qualifies). Contact: Daniel Vetter, Thierry Reding, respective driver maintainers -Switch from reference/unreference to get/put --------------------------------------------- - -For some reason DRM core uses ``reference``/``unreference`` suffixes for -refcounting functions, but kernel uses ``get``/``put`` (e.g. -``kref_get``/``put()``). It would be good to switch over for consistency, and -it's shorter. Needs to be done in 3 steps for each pair of functions: -* Create new ``get``/``put`` functions, define the old names as compatibility - wrappers -* Switch over each file/driver using a cocci-generated spatch. -* Once all users of the old names are gone, remove them. +Remove custom dumb_map_offset implementations +--------------------------------------------- -This way drivers/patches in the progress of getting merged won't break. +All GEM based drivers should be using drm_gem_create_mmap_offset() instead. +Audit each individual driver, make sure it'll work with the generic +implementation (there's lots of outdated locking leftovers in various +implementations), and then remove it. -Contact: Daniel Vetter +Contact: Daniel Vetter, respective driver maintainers Convert existing KMS drivers to atomic modesetting -------------------------------------------------- @@ -234,6 +228,34 @@ efficient. Contact: Daniel Vetter +Defaults for .gem_prime_import and export +----------------------------------------- + +Most drivers don't need to set drm_driver->gem_prime_import and +->gem_prime_export now that drm_gem_prime_import() and drm_gem_prime_export() +are the default. + +struct drm_gem_object_funcs +--------------------------- + +GEM objects can now have a function table instead of having the callbacks on the +DRM driver struct. This is now the preferred way and drivers can be moved over. + +Use DRM_MODESET_LOCK_ALL_* helpers instead of boilerplate +--------------------------------------------------------- + +For cases where drivers are attempting to grab the modeset locks with a local +acquire context. Replace the boilerplate code surrounding +drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN() and +DRM_MODESET_LOCK_ALL_END() instead. + +This should also be done for all places where drm_modest_lock_all() is still +used. + +As a reference, take a look at the conversions already completed in drm core. + +Contact: Sean Paul, respective driver maintainers + Core refactorings ================= @@ -339,6 +361,16 @@ Some of these date from the very introduction of KMS in 2008 ... leftovers from older (never merged into upstream) KMS designs where modes where set using their ID, including support to add/remove modes. +- Make ->funcs and ->helper_private vtables optional. There's a bunch of empty + function tables in drivers, but before we can remove them we need to make sure + that all the users in helpers and drivers do correctly check for a NULL + vtable. + +- Cleanup up the various ->destroy callbacks. A lot of them just wrapt the + drm_*_cleanup implementations and can be removed. Some tack a kfree() at the + end, for which we could add drm_*_cleanup_kfree(). And then there's the (for + historical reasons) misnamed drm_primary_helper_destroy() function. + Better Testing ============== diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst index 0a6ea6216e41..7dfc349a4508 100644 --- a/Documentation/gpu/vkms.rst +++ b/Documentation/gpu/vkms.rst @@ -10,8 +10,8 @@ TODO ==== -CRC API -------- +CRC API Improvements +-------------------- - Optimize CRC computation ``compute_crc()`` and plane blending ``blend()`` @@ -22,3 +22,100 @@ CRC API - Add igt test to check extreme alpha values i.e. fully opaque and fully transparent (intermediate values are affected by hw-specific rounding modes). + +Vblank issues +------------- + +Some IGT test cases are failing. Need to analyze why and fix the issues: + +- plain-flip-fb-recreate +- plain-flip-ts-check +- flip-vs-blocking-wf-vblank +- plain-flip-fb-recreate-interruptible +- flip-vs-wf_vblank-interruptible + +Runtime Configuration +--------------------- + +We want to be able to reconfigure vkms instance without having to reload the +module. Use/Test-cases: + +- Hotplug/hotremove connectors on the fly (to be able to test DP MST handling of + compositors). + +- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of + them first). + +- Change output configuration: Plug/unplug screens, change EDID, allow changing + the refresh rate. + +The currently proposed solution is to expose vkms configuration through +configfs. All existing module options should be supported through configfs too. + +Add Plane Features +------------------ + +There's lots of plane features we could add support for: + +- Real overlay planes, not just cursor. + +- Full alpha blending on all planes. + +- Rotation, scaling. + +- Additional buffer formats, especially YUV formats for video like NV12. + Low/high bpp RGB formats would also be interesting. + +- Async updates (currently only possible on cursor plane using the legacy cursor + api). + +For all of these, we also want to review the igt test coverage and make sure all +relevant igt testcases work on vkms. + +Writeback support +----------------- + +Currently vkms only computes a CRC for each frame. Once we have additional plane +features, we could write back the entire composited frame, and expose it as: + +- Writeback connector. This is useful for testing compositors if you don't have + hardware with writeback support. + +- As a v4l device. This is useful for debugging compositors on special vkms + configurations, so that developers see what's really going on. + +Prime Buffer Sharing +-------------------- + +We already have vgem, which is a gem driver for testing rendering, similar to +how vkms is for testing the modeset side. Adding buffer sharing support to vkms +allows us to test them together, to test synchronization and lots of other +features. Also, this allows compositors to test whether they work correctly on +SoC chips, where the display and rendering is very often split between 2 +drivers. + +Output Features +--------------- + +- Variable refresh rate/freesync support. This probably needs prime buffer + sharing support, so that we can use vgem fences to simulate rendering in + testing. Also needs support to specify the EDID. + +- Add support for link status, so that compositors can validate their runtime + fallbacks when e.g. a Display Port link goes bad. + +- All the hotplug handling describe under "Runtime Configuration". + +Atomic Check using eBPF +----------------------- + +Atomic drivers have lots of restrictions which are not exposed to userspace in +any explicit form through e.g. possible property values. Userspace can only +inquiry about these limits through the atomic IOCTL, possibly using the +TEST_ONLY flag. Trying to add configurable code for all these limits, to allow +compositors to be tested against them, would be rather futile exercise. Instead +we could add support for eBPF to validate any kind of atomic state, and +implement a library of different restrictions. + +This needs a bunch of features (plane compositing, multiple outputs, ...) +enabled already to make sense. diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index 39033538eb03..5e277b0d91ce 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -58,6 +58,9 @@ The ADM1075, unlike many other PMBus devices, does not support internal voltage or current scaling. Reported voltages, currents, and power are raw measurements, and will typically have to be scaled. +The shunt value in micro-ohms can be set via device tree at compile-time. Please +refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings +if the device tree is used. Platform data support --------------------- diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475 index 09d73a10644c..01b46b290532 100644 --- a/Documentation/hwmon/adt7475 +++ b/Documentation/hwmon/adt7475 @@ -79,6 +79,18 @@ ADT7490: * 2 GPIO pins (not implemented) * system acoustics optimizations (not implemented) +Sysfs Mapping +------------- + + ADT7490 ADT7476 ADT7475 ADT7473 + ------- ------- ------- ------- +in0 2.5VIN (22) 2.5VIN (22) - - +in1 VCCP (23) VCCP (23) VCCP (14) VCCP (14) +in2 VCC (4) VCC (4) VCC (4) VCC (3) +in3 5VIN (20) 5VIN (20) +in4 12VIN (21) 12VIN (21) +in5 VTT (8) + Special Features ---------------- diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt index eb7a78aebb38..8bdefb41be30 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.txt @@ -299,17 +299,25 @@ functions is used. The header file linux/hwmon-sysfs.h provides a number of useful macros to declare and use hardware monitoring sysfs attributes. -In many cases, you can use the exsting define DEVICE_ATTR to declare such -attributes. This is feasible if an attribute has no additional context. However, -in many cases there will be additional information such as a sensor index which -will need to be passed to the sysfs attribute handling function. +In many cases, you can use the exsting define DEVICE_ATTR or its variants +DEVICE_ATTR_{RW,RO,WO} to declare such attributes. This is feasible if an +attribute has no additional context. However, in many cases there will be +additional information such as a sensor index which will need to be passed +to the sysfs attribute handling function. SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 can be used to define attributes which need such additional context information. SENSOR_DEVICE_ATTR requires one additional argument, SENSOR_DEVICE_ATTR_2 requires two. -SENSOR_DEVICE_ATTR defines a struct sensor_device_attribute variable. -This structure has the following fields. +Simplified variants of SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 are available +and should be used if standard attribute permissions and function names are +feasible. Standard permissions are 0644 for SENSOR_DEVICE_ATTR[_2]_RW, +0444 for SENSOR_DEVICE_ATTR[_2]_RO, and 0200 for SENSOR_DEVICE_ATTR[_2]_WO. +Standard functions, similar to DEVICE_ATTR_{RW,RO,WO}, have _show and _store +appended to the provided function name. + +SENSOR_DEVICE_ATTR and its variants define a struct sensor_device_attribute +variable. This structure has the following fields. struct sensor_device_attribute { struct device_attribute dev_attr; @@ -320,8 +328,8 @@ You can use to_sensor_dev_attr to get the pointer to this structure from the attribute read or write function. Its parameter is the device to which the attribute is attached. -SENSOR_DEVICE_ATTR_2 defines a struct sensor_device_attribute_2 variable, -which is defined as follows. +SENSOR_DEVICE_ATTR_2 and its variants define a struct sensor_device_attribute_2 +variable, which is defined as follows. struct sensor_device_attribute_2 { struct device_attribute dev_attr; diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index b8df81f6d6bc..0f36c021192d 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -62,3 +62,18 @@ bus and shunt voltage conversion times multiplied by the averaging rate. We don't touch the conversion times and only modify the number of averages. The lower limit of the update_interval is 2 ms, the upper limit is 2253 ms. The actual programmed interval may vary from the desired value. + +General sysfs entries +------------- + +in0_input Shunt voltage(mV) channel +in1_input Bus voltage(mV) channel +curr1_input Current(mA) measurement channel +power1_input Power(uW) measurement channel +shunt_resistor Shunt resistance(uOhm) channel + +Sysfs entries for ina226, ina230 and ina231 only +------------- + +update_interval data conversion time; affects number of samples used + to average results for shunt and bus voltages. diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index 2f1120f88c16..010583608f12 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -42,6 +42,11 @@ Supported chips: Addresses scanned: none Datasheet: Publicly available at the ST website http://www.st.com/internet/analog/product/121769.jsp + * ST Microelectronics STLM75 + Prefix: 'stlm75' + Addresses scanned: none + Datasheet: Publicly available at the ST website + https://www.st.com/resource/en/datasheet/stlm75.pdf * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275 Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275' Addresses scanned: none diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ new file mode 100644 index 000000000000..e787596e03fe --- /dev/null +++ b/Documentation/hwmon/occ @@ -0,0 +1,112 @@ +Kernel driver occ-hwmon +======================= + +Supported chips: + * POWER8 + * POWER9 + +Author: Eddie James <eajames@linux.ibm.com> + +Description +----------- + +This driver supports hardware monitoring for the On-Chip Controller (OCC) +embedded on POWER processors. The OCC is a device that collects and aggregates +sensor data from the processor and the system. The OCC can provide the raw +sensor data as well as perform thermal and power management on the system. + +The P8 version of this driver is a client driver of I2C. It may be probed +manually if an "ibm,p8-occ-hwmon" compatible device is found under the +appropriate I2C bus node in the device-tree. + +The P9 version of this driver is a client driver of the FSI-based OCC driver. +It will be probed automatically by the FSI-based OCC driver. + +Sysfs entries +------------- + +The following attributes are supported. All attributes are read-only unless +specified. + +The OCC sensor ID is an integer that represents the unique identifier of the +sensor with respect to the OCC. For example, a temperature sensor for the third +DIMM slot in the system may have a sensor ID of 7. This mapping is unavailable +to the device driver, which must therefore export the sensor ID as-is. + +Some entries are only present with certain OCC sensor versions or only on +certain OCCs in the system. The version number is not exported to the user +but can be inferred. + +temp[1-n]_label OCC sensor ID. +[with temperature sensor version 1] + temp[1-n]_input Measured temperature of the component in millidegrees + Celsius. +[with temperature sensor version >= 2] + temp[1-n]_type The FRU (Field Replaceable Unit) type + (represented by an integer) for the component + that this sensor measures. + temp[1-n]_fault Temperature sensor fault boolean; 1 to indicate + that a fault is present or 0 to indicate that + no fault is present. + [with type == 3 (FRU type is VRM)] + temp[1-n]_alarm VRM temperature alarm boolean; 1 to indicate + alarm, 0 to indicate no alarm + [else] + temp[1-n]_input Measured temperature of the component in + millidegrees Celsius. + +freq[1-n]_label OCC sensor ID. +freq[1-n]_input Measured frequency of the component in MHz. + +power[1-n]_input Latest measured power reading of the component in + microwatts. +power[1-n]_average Average power of the component in microwatts. +power[1-n]_average_interval The amount of time over which the power average + was taken in microseconds. +[with power sensor version < 2] + power[1-n]_label OCC sensor ID. +[with power sensor version >= 2] + power[1-n]_label OCC sensor ID + function ID + channel in the form + of a string, delimited by underscores, i.e. "0_15_1". + Both the function ID and channel are integers that + further identify the power sensor. +[with power sensor version 0xa0] + power[1-n]_label OCC sensor ID + sensor type in the form of a string, + delimited by an underscore, i.e. "0_system". Sensor + type will be one of "system", "proc", "vdd" or "vdn". + For this sensor version, OCC sensor ID will be the same + for all power sensors. +[present only on "master" OCC; represents the whole system power; only one of + this type of power sensor will be present] + power[1-n]_label "system" + power[1-n]_input Latest system output power in microwatts. + power[1-n]_cap Current system power cap in microwatts. + power[1-n]_cap_not_redundant System power cap in microwatts when + there is not redundant power. + power[1-n]_cap_max Maximum power cap that the OCC can enforce in + microwatts. + power[1-n]_cap_min Minimum power cap that the OCC can enforce in + microwatts. + power[1-n]_cap_user The power cap set by the user, in microwatts. + This attribute will return 0 if no user power + cap has been set. This attribute is read-write, + but writing any precision below watts will be + ignored, i.e. requesting a power cap of + 500900000 microwatts will result in a power cap + request of 500 watts. + [with caps sensor version > 1] + power[1-n]_cap_user_source Indicates how the user power cap was + set. This is an integer that maps to + system or firmware components that can + set the user power cap. + +The following "extn" sensors are exported as a way for the OCC to provide data +that doesn't fit anywhere else. The meaning of these sensors is entirely +dependent on their data, and cannot be statically defined. + +extn[1-n]_label ASCII ID or OCC sensor ID. +extn[1-n]_flags This is one byte hexadecimal value. Bit 7 indicates the + type of the label attribute; 1 for sensor ID, 0 for + ASCII ID. Other bits are reserved. +extn[1-n]_input 6 bytes of hexadecimal data, with a meaning defined by + the sensor ID. diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu b/Documentation/i2c/busses/i2c-nvidia-gpu new file mode 100644 index 000000000000..31884d2b2eb5 --- /dev/null +++ b/Documentation/i2c/busses/i2c-nvidia-gpu @@ -0,0 +1,18 @@ +Kernel driver i2c-nvidia-gpu + +Datasheet: not publicly available. + +Authors: + Ajay Gupta <ajayg@nvidia.com> + +Description +----------- + +i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing +and later GPUs and it is used to communicate with Type-C controller on GPUs. + +If your 'lspci -v' listing shows something like the following, + +01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1) + +then this driver should support the I2C controller of your GPU. diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst index cef220c176a4..a8c0873beb95 100644 --- a/Documentation/input/event-codes.rst +++ b/Documentation/input/event-codes.rst @@ -190,16 +190,7 @@ A few EV_REL codes have special meanings: * REL_WHEEL, REL_HWHEEL: - These codes are used for vertical and horizontal scroll wheels, - respectively. The value is the number of "notches" moved on the wheel, the - physical size of which varies by device. For high-resolution wheels (which - report multiple events for each notch of movement, or do not have notches) - this may be an approximation based on the high-resolution scroll events. - -* REL_WHEEL_HI_RES: - - - If a vertical scroll wheel supports high-resolution scrolling, this code - will be emitted in addition to REL_WHEEL. The value is the (approximate) - distance travelled by the user's finger, in microns. + respectively. EV_ABS ------ diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 8390c360d4b3..c9e3d93e7a89 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -81,12 +81,7 @@ KBUILD_EXTMOD -------------------------------------------------- Set the directory to look for the kernel source when building external modules. -The directory can be specified in several ways: -1) Use "M=..." on the command line -2) Environment variable KBUILD_EXTMOD -3) Environment variable SUBDIRS -The possibilities are listed in the order they take precedence. -Using "M=..." will always override the others. +Setting "M=..." takes precedence over KBUILD_EXTMOD. KBUILD_OUTPUT -------------------------------------------------- diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index fc9485d79061..ff4c25098119 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -279,10 +279,14 @@ such a method has a form like:: One important point cannot be overstated: every kobject must have a release() method, and the kobject must persist (in a consistent state) until that method is called. If these constraints are not met, the code is -flawed. Note that the kernel will warn you if you forget to provide a +flawed. Note that the kernel will warn you if you forget to provide a release() method. Do not try to get rid of this warning by providing an -"empty" release function; you will be mocked mercilessly by the kobject -maintainer if you attempt this. +"empty" release function. + +If all your cleanup function needs to do is call kfree(), then you must +create a wrapper function which uses container_of() to upcast to the correct +type (as shown in the example above) and then calls kfree() on the overall +structure. Note, the name of the kobject is available in the release function, but it must NOT be changed within this callback. Otherwise there will be a memory diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt index 836cb16d6f09..8b39cc6b03ee 100644 --- a/Documentation/leds/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -15,7 +15,7 @@ existing subsystems with minimal additional code. Examples are the disk-activity nand-disk and sharpsl-charge triggers. With led triggers disabled, the code optimises away. -Complex triggers whilst available to all LEDs have LED specific +Complex triggers while available to all LEDs have LED specific parameters and work on a per LED basis. The timer trigger is an example. The timer trigger will periodically change the LED brightness between LED_OFF and the current brightness setting. The "on" and "off" time can diff --git a/Documentation/media/.gitignore b/Documentation/media/.gitignore index 08b21de3ef94..53adc029061f 100644 --- a/Documentation/media/.gitignore +++ b/Documentation/media/.gitignore @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + *.pdf # Files generated from *.dot uapi/v4l/pipeline.svg diff --git a/Documentation/media/Makefile b/Documentation/media/Makefile index 36166952d555..d75d70f191bc 100644 --- a/Documentation/media/Makefile +++ b/Documentation/media/Makefile @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Rules to convert a .h file to inline RST documentation SRC_DIR=$(srctree)/Documentation/media diff --git a/Documentation/media/audio.h.rst.exceptions b/Documentation/media/audio.h.rst.exceptions index 940458774cf6..cf6620477f73 100644 --- a/Documentation/media/audio.h.rst.exceptions +++ b/Documentation/media/audio.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBAUDIO_H_ diff --git a/Documentation/media/ca.h.rst.exceptions b/Documentation/media/ca.h.rst.exceptions index 553559cc6ad7..f6828238eb48 100644 --- a/Documentation/media/ca.h.rst.exceptions +++ b/Documentation/media/ca.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBCA_H_ diff --git a/Documentation/media/cec-drivers/index.rst b/Documentation/media/cec-drivers/index.rst index 7ef204823422..2b7fcaa4311b 100644 --- a/Documentation/media/cec-drivers/index.rst +++ b/Documentation/media/cec-drivers/index.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> diff --git a/Documentation/media/cec-drivers/pulse8-cec.rst b/Documentation/media/cec-drivers/pulse8-cec.rst index 99551c6a9bc5..356d08b519f3 100644 --- a/Documentation/media/cec-drivers/pulse8-cec.rst +++ b/Documentation/media/cec-drivers/pulse8-cec.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Pulse-Eight CEC Adapter driver ============================== diff --git a/Documentation/media/cec.h.rst.exceptions b/Documentation/media/cec.h.rst.exceptions index d9fd092de6f8..014816d04b9e 100644 --- a/Documentation/media/cec.h.rst.exceptions +++ b/Documentation/media/cec.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _CEC_UAPI_H diff --git a/Documentation/media/conf.py b/Documentation/media/conf.py index bef927bc4659..1f194fcd2cae 100644 --- a/Documentation/media/conf.py +++ b/Documentation/media/conf.py @@ -1,5 +1,7 @@ # -*- coding: utf-8; mode: python -*- +# SPDX-License-Identifier: GPL-2.0 + project = 'Linux Media Subsystem Documentation' tags.add("subproject") diff --git a/Documentation/media/conf_nitpick.py b/Documentation/media/conf_nitpick.py index 480d548af670..d0c50d75f518 100644 --- a/Documentation/media/conf_nitpick.py +++ b/Documentation/media/conf_nitpick.py @@ -1,5 +1,7 @@ # -*- coding: utf-8; mode: python -*- +# SPDX-License-Identifier: GPL-2.0 + project = 'Linux Media Subsystem Documentation' # It is possible to run Sphinx in nickpick mode with: diff --git a/Documentation/media/dmx.h.rst.exceptions b/Documentation/media/dmx.h.rst.exceptions index a8c4239ed95b..afc14d384b83 100644 --- a/Documentation/media/dmx.h.rst.exceptions +++ b/Documentation/media/dmx.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _UAPI_DVBDMX_H_ diff --git a/Documentation/media/dvb-drivers/avermedia.rst b/Documentation/media/dvb-drivers/avermedia.rst index 49cd9c935307..14f437ca38d3 100644 --- a/Documentation/media/dvb-drivers/avermedia.rst +++ b/Documentation/media/dvb-drivers/avermedia.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + HOWTO: Get An Avermedia DVB-T working under Linux ------------------------------------------------- diff --git a/Documentation/media/dvb-drivers/bt8xx.rst b/Documentation/media/dvb-drivers/bt8xx.rst index e3e387bdf498..7936cd96fc8f 100644 --- a/Documentation/media/dvb-drivers/bt8xx.rst +++ b/Documentation/media/dvb-drivers/bt8xx.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + How to get the bt8xx cards working ================================== diff --git a/Documentation/media/dvb-drivers/cards.rst b/Documentation/media/dvb-drivers/cards.rst index 177cbeb2b561..e2e30a56b450 100644 --- a/Documentation/media/dvb-drivers/cards.rst +++ b/Documentation/media/dvb-drivers/cards.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Hardware supported by the linuxtv.org DVB drivers ================================================= diff --git a/Documentation/media/dvb-drivers/ci.rst b/Documentation/media/dvb-drivers/ci.rst index 87f3748c49b9..35f33f1f9e2a 100644 --- a/Documentation/media/dvb-drivers/ci.rst +++ b/Documentation/media/dvb-drivers/ci.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Conditional Access Interface (CI API) ================================================ diff --git a/Documentation/media/dvb-drivers/contributors.rst b/Documentation/media/dvb-drivers/contributors.rst index 5949753008ae..f23b6e6faf46 100644 --- a/Documentation/media/dvb-drivers/contributors.rst +++ b/Documentation/media/dvb-drivers/contributors.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Contributors ============ diff --git a/Documentation/media/dvb-drivers/dvb-usb.rst b/Documentation/media/dvb-drivers/dvb-usb.rst index eec99cd07a30..6679191819aa 100644 --- a/Documentation/media/dvb-drivers/dvb-usb.rst +++ b/Documentation/media/dvb-drivers/dvb-usb.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Idea behind the dvb-usb-framework ================================= diff --git a/Documentation/media/dvb-drivers/faq.rst b/Documentation/media/dvb-drivers/faq.rst index a8593d3792fa..52f153d18278 100644 --- a/Documentation/media/dvb-drivers/faq.rst +++ b/Documentation/media/dvb-drivers/faq.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + FAQ === diff --git a/Documentation/media/dvb-drivers/frontends.rst b/Documentation/media/dvb-drivers/frontends.rst index 1f5f57989196..7b8336ece681 100644 --- a/Documentation/media/dvb-drivers/frontends.rst +++ b/Documentation/media/dvb-drivers/frontends.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + **************** Frontend drivers **************** diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst index 314e127d82e3..9d3fce544f85 100644 --- a/Documentation/media/dvb-drivers/index.rst +++ b/Documentation/media/dvb-drivers/index.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> diff --git a/Documentation/media/dvb-drivers/intro.rst b/Documentation/media/dvb-drivers/intro.rst index d6eeb2708b9b..4e361bcc3ad4 100644 --- a/Documentation/media/dvb-drivers/intro.rst +++ b/Documentation/media/dvb-drivers/intro.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Introduction ============ diff --git a/Documentation/media/dvb-drivers/lmedm04.rst b/Documentation/media/dvb-drivers/lmedm04.rst index e8913d4481a0..a6ee33413748 100644 --- a/Documentation/media/dvb-drivers/lmedm04.rst +++ b/Documentation/media/dvb-drivers/lmedm04.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Firmware files for lmedm04 cards ================================ diff --git a/Documentation/media/dvb-drivers/opera-firmware.rst b/Documentation/media/dvb-drivers/opera-firmware.rst index 41236b43c124..fab3581551de 100644 --- a/Documentation/media/dvb-drivers/opera-firmware.rst +++ b/Documentation/media/dvb-drivers/opera-firmware.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Opera firmware ============== diff --git a/Documentation/media/dvb-drivers/technisat.rst b/Documentation/media/dvb-drivers/technisat.rst index f80f4ecc1560..9eaa12366bbf 100644 --- a/Documentation/media/dvb-drivers/technisat.rst +++ b/Documentation/media/dvb-drivers/technisat.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + How to set up the Technisat/B2C2 Flexcop devices ================================================ diff --git a/Documentation/media/dvb-drivers/ttusb-dec.rst b/Documentation/media/dvb-drivers/ttusb-dec.rst index 84fc2199dc29..516bbab8a872 100644 --- a/Documentation/media/dvb-drivers/ttusb-dec.rst +++ b/Documentation/media/dvb-drivers/ttusb-dec.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + TechnoTrend/Hauppauge DEC USB Driver ==================================== diff --git a/Documentation/media/dvb-drivers/udev.rst b/Documentation/media/dvb-drivers/udev.rst index 7d7d5d82108a..ca6c9c226902 100644 --- a/Documentation/media/dvb-drivers/udev.rst +++ b/Documentation/media/dvb-drivers/udev.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + UDEV rules for DVB ================== diff --git a/Documentation/media/frontend.h.rst.exceptions b/Documentation/media/frontend.h.rst.exceptions index f7c4df620a52..6283702c08c8 100644 --- a/Documentation/media/frontend.h.rst.exceptions +++ b/Documentation/media/frontend.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBFRONTEND_H_ diff --git a/Documentation/media/index.rst b/Documentation/media/index.rst index 1cf5316c8ff8..0a222fc1d7ca 100644 --- a/Documentation/media/index.rst +++ b/Documentation/media/index.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Linux Media Subsystem Documentation =================================== diff --git a/Documentation/media/intro.rst b/Documentation/media/intro.rst index 9ce2e23a0236..4a6bd665b884 100644 --- a/Documentation/media/intro.rst +++ b/Documentation/media/intro.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 ============ Introduction diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst index bca1d9d1d223..3ce26b7c2b2b 100644 --- a/Documentation/media/kapi/cec-core.rst +++ b/Documentation/media/kapi/cec-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + CEC Kernel Support ================== diff --git a/Documentation/media/kapi/csi2.rst b/Documentation/media/kapi/csi2.rst index 0560100efca2..a7e75e2eba85 100644 --- a/Documentation/media/kapi/csi2.rst +++ b/Documentation/media/kapi/csi2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + MIPI CSI-2 ========== diff --git a/Documentation/media/kapi/dtv-ca.rst b/Documentation/media/kapi/dtv-ca.rst index fded096b937c..8a09862b428b 100644 --- a/Documentation/media/kapi/dtv-ca.rst +++ b/Documentation/media/kapi/dtv-ca.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Conditional Access kABI ---------------------------------- diff --git a/Documentation/media/kapi/dtv-common.rst b/Documentation/media/kapi/dtv-common.rst index 7a9574f03190..f8b2c4dc8170 100644 --- a/Documentation/media/kapi/dtv-common.rst +++ b/Documentation/media/kapi/dtv-common.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Common functions --------------------------- diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst index bca743dc6b43..17454a2cf6b0 100644 --- a/Documentation/media/kapi/dtv-core.rst +++ b/Documentation/media/kapi/dtv-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV (DVB) devices ------------------------ diff --git a/Documentation/media/kapi/dtv-demux.rst b/Documentation/media/kapi/dtv-demux.rst index 24857133e4e8..c0ae5dec5328 100644 --- a/Documentation/media/kapi/dtv-demux.rst +++ b/Documentation/media/kapi/dtv-demux.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Demux kABI --------------------- diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst index 472650cdb100..8ea64742c7ba 100644 --- a/Documentation/media/kapi/dtv-frontend.rst +++ b/Documentation/media/kapi/dtv-frontend.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Frontend kABI ------------------------ diff --git a/Documentation/media/kapi/dtv-net.rst b/Documentation/media/kapi/dtv-net.rst index 158c7cbd7600..deb6bffe96bb 100644 --- a/Documentation/media/kapi/dtv-net.rst +++ b/Documentation/media/kapi/dtv-net.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Network kABI ----------------------- diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst index 69362b3135c2..0bcfeadbc52d 100644 --- a/Documentation/media/kapi/mc-core.rst +++ b/Documentation/media/kapi/mc-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Media Controller devices ------------------------ diff --git a/Documentation/media/kapi/rc-core.rst b/Documentation/media/kapi/rc-core.rst index 4759f020d6b2..53f5e643b6e9 100644 --- a/Documentation/media/kapi/rc-core.rst +++ b/Documentation/media/kapi/rc-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Remote Controller devices ------------------------- diff --git a/Documentation/media/kapi/v4l2-async.rst b/Documentation/media/kapi/v4l2-async.rst index 523ff9eb09a0..3422330b3b1f 100644 --- a/Documentation/media/kapi/v4l2-async.rst +++ b/Documentation/media/kapi/v4l2-async.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 async kAPI ^^^^^^^^^^^^^^^ .. kernel-doc:: include/media/v4l2-async.h diff --git a/Documentation/media/kapi/v4l2-clocks.rst b/Documentation/media/kapi/v4l2-clocks.rst index b8a895860a8a..5c22eecab7ba 100644 --- a/Documentation/media/kapi/v4l2-clocks.rst +++ b/Documentation/media/kapi/v4l2-clocks.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 clocks ----------- diff --git a/Documentation/media/kapi/v4l2-common.rst b/Documentation/media/kapi/v4l2-common.rst index 525d804871ff..b1e70eb56aa4 100644 --- a/Documentation/media/kapi/v4l2-common.rst +++ b/Documentation/media/kapi/v4l2-common.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 common functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-controls.rst b/Documentation/media/kapi/v4l2-controls.rst index 07a179eeb2fb..64ab99abf0b6 100644 --- a/Documentation/media/kapi/v4l2-controls.rst +++ b/Documentation/media/kapi/v4l2-controls.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Controls ============= diff --git a/Documentation/media/kapi/v4l2-core.rst b/Documentation/media/kapi/v4l2-core.rst index 5cf292037a48..0dcad7a23141 100644 --- a/Documentation/media/kapi/v4l2-core.rst +++ b/Documentation/media/kapi/v4l2-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Video4Linux devices ------------------- diff --git a/Documentation/media/kapi/v4l2-dev.rst b/Documentation/media/kapi/v4l2-dev.rst index eb03ccc41c41..b359f1804bbe 100644 --- a/Documentation/media/kapi/v4l2-dev.rst +++ b/Documentation/media/kapi/v4l2-dev.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Video device' s internal representation ======================================= diff --git a/Documentation/media/kapi/v4l2-device.rst b/Documentation/media/kapi/v4l2-device.rst index 6c58bbbaa66f..c4311f0421be 100644 --- a/Documentation/media/kapi/v4l2-device.rst +++ b/Documentation/media/kapi/v4l2-device.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 device instance -------------------- diff --git a/Documentation/media/kapi/v4l2-dv-timings.rst b/Documentation/media/kapi/v4l2-dv-timings.rst index 55274329d229..b178f931518b 100644 --- a/Documentation/media/kapi/v4l2-dv-timings.rst +++ b/Documentation/media/kapi/v4l2-dv-timings.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 DV Timings functions ^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-event.rst b/Documentation/media/kapi/v4l2-event.rst index 5c7e31224ddc..a4b7ae2b94d8 100644 --- a/Documentation/media/kapi/v4l2-event.rst +++ b/Documentation/media/kapi/v4l2-event.rst @@ -1,3 +1,4 @@ +.. SPDX-License-Identifier: GPL-2.0 V4L2 events ----------- diff --git a/Documentation/media/kapi/v4l2-fh.rst b/Documentation/media/kapi/v4l2-fh.rst index 3ee64adf4635..4c62b19af744 100644 --- a/Documentation/media/kapi/v4l2-fh.rst +++ b/Documentation/media/kapi/v4l2-fh.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 File handlers ------------------ diff --git a/Documentation/media/kapi/v4l2-flash-led-class.rst b/Documentation/media/kapi/v4l2-flash-led-class.rst index 20798bdac387..2aa6bed9b8db 100644 --- a/Documentation/media/kapi/v4l2-flash-led-class.rst +++ b/Documentation/media/kapi/v4l2-flash-led-class.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 flash functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-fwnode.rst b/Documentation/media/kapi/v4l2-fwnode.rst index 6c8bccdfeb25..e313b6cddcd0 100644 --- a/Documentation/media/kapi/v4l2-fwnode.rst +++ b/Documentation/media/kapi/v4l2-fwnode.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 fwnode kAPI ^^^^^^^^^^^^^^^^ .. kernel-doc:: include/media/v4l2-fwnode.h diff --git a/Documentation/media/kapi/v4l2-intro.rst b/Documentation/media/kapi/v4l2-intro.rst index e614d8d4ca1c..cea3e263e48b 100644 --- a/Documentation/media/kapi/v4l2-intro.rst +++ b/Documentation/media/kapi/v4l2-intro.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Introduction ------------ diff --git a/Documentation/media/kapi/v4l2-mc.rst b/Documentation/media/kapi/v4l2-mc.rst index 8af347013490..0c352ac588b2 100644 --- a/Documentation/media/kapi/v4l2-mc.rst +++ b/Documentation/media/kapi/v4l2-mc.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Media Controller functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-mediabus.rst b/Documentation/media/kapi/v4l2-mediabus.rst index e64131906d11..1f2254cba92d 100644 --- a/Documentation/media/kapi/v4l2-mediabus.rst +++ b/Documentation/media/kapi/v4l2-mediabus.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Media Bus functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-mem2mem.rst b/Documentation/media/kapi/v4l2-mem2mem.rst index 5536b4a71e51..a43b31cc8261 100644 --- a/Documentation/media/kapi/v4l2-mem2mem.rst +++ b/Documentation/media/kapi/v4l2-mem2mem.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Memory to Memory functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-rect.rst b/Documentation/media/kapi/v4l2-rect.rst index 8df5067ad57d..fc315cd84156 100644 --- a/Documentation/media/kapi/v4l2-rect.rst +++ b/Documentation/media/kapi/v4l2-rect.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 rect helper functions ^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst index 1280e05b662b..be4970909f40 100644 --- a/Documentation/media/kapi/v4l2-subdev.rst +++ b/Documentation/media/kapi/v4l2-subdev.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 sub-devices ---------------- diff --git a/Documentation/media/kapi/v4l2-tuner.rst b/Documentation/media/kapi/v4l2-tuner.rst index 86e894639651..e6caa3321566 100644 --- a/Documentation/media/kapi/v4l2-tuner.rst +++ b/Documentation/media/kapi/v4l2-tuner.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Tuner functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-tveeprom.rst b/Documentation/media/kapi/v4l2-tveeprom.rst index 33422cb26aa7..43fb391edaba 100644 --- a/Documentation/media/kapi/v4l2-tveeprom.rst +++ b/Documentation/media/kapi/v4l2-tveeprom.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Hauppauge TV EEPROM functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-videobuf.rst b/Documentation/media/kapi/v4l2-videobuf.rst index 54adfd772d28..1a7756397b1a 100644 --- a/Documentation/media/kapi/v4l2-videobuf.rst +++ b/Documentation/media/kapi/v4l2-videobuf.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. _vb_framework: Videobuf Framework diff --git a/Documentation/media/kapi/v4l2-videobuf2.rst b/Documentation/media/kapi/v4l2-videobuf2.rst index 3c4cb1e7e05f..1044f64ff168 100644 --- a/Documentation/media/kapi/v4l2-videobuf2.rst +++ b/Documentation/media/kapi/v4l2-videobuf2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. _vb2_framework: V4L2 videobuf2 functions and data structures diff --git a/Documentation/media/lirc.h.rst.exceptions b/Documentation/media/lirc.h.rst.exceptions index 984b61dc3f2e..379b9e7df5d0 100644 --- a/Documentation/media/lirc.h.rst.exceptions +++ b/Documentation/media/lirc.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _LINUX_LIRC_H diff --git a/Documentation/media/media.h.rst.exceptions b/Documentation/media/media.h.rst.exceptions index 684fe9c86dee..9b4c26502d95 100644 --- a/Documentation/media/media.h.rst.exceptions +++ b/Documentation/media/media.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define __LINUX_MEDIA_H diff --git a/Documentation/media/media_kapi.rst b/Documentation/media/media_kapi.rst index 83da736fad72..1389998c90f7 100644 --- a/Documentation/media/media_kapi.rst +++ b/Documentation/media/media_kapi.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> diff --git a/Documentation/media/media_uapi.rst b/Documentation/media/media_uapi.rst index 28eb35a1f965..0753005c7bb4 100644 --- a/Documentation/media/media_uapi.rst +++ b/Documentation/media/media_uapi.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> @@ -10,9 +10,9 @@ Linux Media Infrastructure userspace API Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or -any later version published by the Free Software Foundation. A copy of -the license is included in the chapter entitled "GNU Free Documentation -License". +any later version published by the Free Software Foundation, with no +Invariant Sections. A copy of the license is included in the chapter +entitled "GNU Free Documentation License". .. only:: html diff --git a/Documentation/media/net.h.rst.exceptions b/Documentation/media/net.h.rst.exceptions index afe6bef91567..5159aa4bbbb9 100644 --- a/Documentation/media/net.h.rst.exceptions +++ b/Documentation/media/net.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBNET_H_ diff --git a/Documentation/media/typical_media_device.svg b/Documentation/media/typical_media_device.svg index d6fad90ec199..bfd5c7db3b00 100644 --- a/Documentation/media/typical_media_device.svg +++ b/Documentation/media/typical_media_device.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="235mm" height="179mm" clip-path="url(#a)" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 22648.239 17899.829" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata1533"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4"><clipPath id="a"><rect id="rect7" width="28000" height="21000"/></clipPath></defs><path id="path11" d="m10146 2636c-518.06 0-1035.1 515-1035.1 1031v4124c0 516 517.06 1032 1035.1 1032h8572.2c518.06 0 1036.1-516 1036.1-1032v-4124c0-516-518.06-1031-1036.1-1031h-8572.2z" fill="#fcf" style=""/><path id="path15" d="m1505.5 13443c-293 0-585 292-585 585v2340c0 293 292 586 585 586h3275c293 0 586-293 586-586v-2340c0-293-293-585-586-585h-3275z" fill="#ffc" style=""/><path id="path19" d="m517.15 22.013c-461 0-922 461-922 922v11169c0 461 461 923 922 923h3692c461 0 922-462 922-923v-11169c0-461-461-922-922-922h-3692z" fill="#e6e6e6" style=""/><path id="path23" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="#ff8080" style=""/><path id="path25" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="none" stroke="#3465af" style=""/><text id="text27" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan29" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan31" class="TextPosition" x="489.5459" y="6111.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan33" fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio decoder</tspan></tspan></tspan></text> diff --git a/Documentation/media/uapi/cec/cec-api.rst b/Documentation/media/uapi/cec/cec-api.rst index 1e2cf498ba30..b614bf81aa20 100644 --- a/Documentation/media/uapi/cec/cec-api.rst +++ b/Documentation/media/uapi/cec/cec-api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst index 334358dfa72e..e10d675546f8 100644 --- a/Documentation/media/uapi/cec/cec-func-close.rst +++ b/Documentation/media/uapi/cec/cec-func-close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-close: diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst index e2b6260b0086..c18d4ba5eb37 100644 --- a/Documentation/media/uapi/cec/cec-func-ioctl.rst +++ b/Documentation/media/uapi/cec/cec-func-ioctl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-ioctl: diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst index 5d6663a649bd..f235aa80155c 100644 --- a/Documentation/media/uapi/cec/cec-func-open.rst +++ b/Documentation/media/uapi/cec/cec-func-open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-open: diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst index c698c969635c..3f6c5b0effa3 100644 --- a/Documentation/media/uapi/cec/cec-func-poll.rst +++ b/Documentation/media/uapi/cec/cec-func-poll.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-poll: diff --git a/Documentation/media/uapi/cec/cec-funcs.rst b/Documentation/media/uapi/cec/cec-funcs.rst index 6d696cead5cb..620590b168c9 100644 --- a/Documentation/media/uapi/cec/cec-funcs.rst +++ b/Documentation/media/uapi/cec/cec-funcs.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _cec-user-func: ****************** diff --git a/Documentation/media/uapi/cec/cec-header.rst b/Documentation/media/uapi/cec/cec-header.rst index d5a9a2828274..726f9766a130 100644 --- a/Documentation/media/uapi/cec/cec-header.rst +++ b/Documentation/media/uapi/cec/cec-header.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec_header: diff --git a/Documentation/media/uapi/cec/cec-intro.rst b/Documentation/media/uapi/cec/cec-intro.rst index 07ee2b8f89d6..05088fcefe81 100644 --- a/Documentation/media/uapi/cec/cec-intro.rst +++ b/Documentation/media/uapi/cec/cec-intro.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _cec-intro: Introduction diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst index 6c1f6efb822e..0c44f31a9b59 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_ADAP_G_CAPS: diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index 84f431a022ad..26465094e3f1 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_ADAP_LOG_ADDRS: .. _CEC_ADAP_G_LOG_ADDRS: diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst index 9e49d4be35d5..693be2f9bf2e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_ADAP_PHYS_ADDR: .. _CEC_ADAP_G_PHYS_ADDR: diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index 8d5633e6ae04..46a1c99a595e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_DQEVENT: diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index 508e2e325683..c53bb5f73f0d 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_MODE: .. _CEC_G_MODE: diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index b25e48afaa08..c3a685ff05cb 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_TRANSMIT: .. _CEC_RECEIVE: diff --git a/Documentation/media/uapi/cec/cec-pin-error-inj.rst b/Documentation/media/uapi/cec/cec-pin-error-inj.rst index 464b006dbe0a..725f8b1c9965 100644 --- a/Documentation/media/uapi/cec/cec-pin-error-inj.rst +++ b/Documentation/media/uapi/cec/cec-pin-error-inj.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + CEC Pin Framework Error Injection ================================= diff --git a/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst b/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst index 1279bd21dbd0..ee2ee74dafa3 100644 --- a/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst +++ b/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_BILINGUAL_CHANNEL_SELECT: diff --git a/Documentation/media/uapi/dvb/audio-channel-select.rst b/Documentation/media/uapi/dvb/audio-channel-select.rst index 8cab3d7abff5..ebb2f121c4c8 100644 --- a/Documentation/media/uapi/dvb/audio-channel-select.rst +++ b/Documentation/media/uapi/dvb/audio-channel-select.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_CHANNEL_SELECT: diff --git a/Documentation/media/uapi/dvb/audio-clear-buffer.rst b/Documentation/media/uapi/dvb/audio-clear-buffer.rst index f6bed67cb070..c5b62cde18c8 100644 --- a/Documentation/media/uapi/dvb/audio-clear-buffer.rst +++ b/Documentation/media/uapi/dvb/audio-clear-buffer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_CLEAR_BUFFER: diff --git a/Documentation/media/uapi/dvb/audio-continue.rst b/Documentation/media/uapi/dvb/audio-continue.rst index ca587869306e..6bdc99e39e20 100644 --- a/Documentation/media/uapi/dvb/audio-continue.rst +++ b/Documentation/media/uapi/dvb/audio-continue.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_CONTINUE: diff --git a/Documentation/media/uapi/dvb/audio-fclose.rst b/Documentation/media/uapi/dvb/audio-fclose.rst index 58d351a3af4b..1e4ad7a0325d 100644 --- a/Documentation/media/uapi/dvb/audio-fclose.rst +++ b/Documentation/media/uapi/dvb/audio-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_fclose: diff --git a/Documentation/media/uapi/dvb/audio-fopen.rst b/Documentation/media/uapi/dvb/audio-fopen.rst index 4a174640bf11..2cf4d83661f4 100644 --- a/Documentation/media/uapi/dvb/audio-fopen.rst +++ b/Documentation/media/uapi/dvb/audio-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_fopen: diff --git a/Documentation/media/uapi/dvb/audio-fwrite.rst b/Documentation/media/uapi/dvb/audio-fwrite.rst index 4980ae7953ef..6dc6bf6cbbc7 100644 --- a/Documentation/media/uapi/dvb/audio-fwrite.rst +++ b/Documentation/media/uapi/dvb/audio-fwrite.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_fwrite: diff --git a/Documentation/media/uapi/dvb/audio-get-capabilities.rst b/Documentation/media/uapi/dvb/audio-get-capabilities.rst index 0d867f189c22..4f1ec47e8ac2 100644 --- a/Documentation/media/uapi/dvb/audio-get-capabilities.rst +++ b/Documentation/media/uapi/dvb/audio-get-capabilities.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_GET_CAPABILITIES: diff --git a/Documentation/media/uapi/dvb/audio-get-status.rst b/Documentation/media/uapi/dvb/audio-get-status.rst index 857b058325f1..30e4dd7fce6d 100644 --- a/Documentation/media/uapi/dvb/audio-get-status.rst +++ b/Documentation/media/uapi/dvb/audio-get-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_GET_STATUS: diff --git a/Documentation/media/uapi/dvb/audio-pause.rst b/Documentation/media/uapi/dvb/audio-pause.rst index c7310dffbff2..4567ecd9e0a3 100644 --- a/Documentation/media/uapi/dvb/audio-pause.rst +++ b/Documentation/media/uapi/dvb/audio-pause.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_PAUSE: diff --git a/Documentation/media/uapi/dvb/audio-play.rst b/Documentation/media/uapi/dvb/audio-play.rst index 943b5eec9f28..17acd4c411b8 100644 --- a/Documentation/media/uapi/dvb/audio-play.rst +++ b/Documentation/media/uapi/dvb/audio-play.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_PLAY: diff --git a/Documentation/media/uapi/dvb/audio-select-source.rst b/Documentation/media/uapi/dvb/audio-select-source.rst index c0434a0bd324..c5ed6243b11c 100644 --- a/Documentation/media/uapi/dvb/audio-select-source.rst +++ b/Documentation/media/uapi/dvb/audio-select-source.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SELECT_SOURCE: diff --git a/Documentation/media/uapi/dvb/audio-set-av-sync.rst b/Documentation/media/uapi/dvb/audio-set-av-sync.rst index cf621f3a3037..c116d105fdea 100644 --- a/Documentation/media/uapi/dvb/audio-set-av-sync.rst +++ b/Documentation/media/uapi/dvb/audio-set-av-sync.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_AV_SYNC: diff --git a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst index f0db1fbdb066..d537da90acf5 100644 --- a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst +++ b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_BYPASS_MODE: diff --git a/Documentation/media/uapi/dvb/audio-set-id.rst b/Documentation/media/uapi/dvb/audio-set-id.rst index 8b1081d24473..aeb6ace6cd1e 100644 --- a/Documentation/media/uapi/dvb/audio-set-id.rst +++ b/Documentation/media/uapi/dvb/audio-set-id.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_ID: diff --git a/Documentation/media/uapi/dvb/audio-set-mixer.rst b/Documentation/media/uapi/dvb/audio-set-mixer.rst index 248aab8c8909..60781aa88202 100644 --- a/Documentation/media/uapi/dvb/audio-set-mixer.rst +++ b/Documentation/media/uapi/dvb/audio-set-mixer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_MIXER: diff --git a/Documentation/media/uapi/dvb/audio-set-mute.rst b/Documentation/media/uapi/dvb/audio-set-mute.rst index 0af105a8ddcc..4449f225e48c 100644 --- a/Documentation/media/uapi/dvb/audio-set-mute.rst +++ b/Documentation/media/uapi/dvb/audio-set-mute.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_MUTE: diff --git a/Documentation/media/uapi/dvb/audio-set-streamtype.rst b/Documentation/media/uapi/dvb/audio-set-streamtype.rst index 46c0362ac71d..d20c34fc7128 100644 --- a/Documentation/media/uapi/dvb/audio-set-streamtype.rst +++ b/Documentation/media/uapi/dvb/audio-set-streamtype.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_STREAMTYPE: diff --git a/Documentation/media/uapi/dvb/audio-stop.rst b/Documentation/media/uapi/dvb/audio-stop.rst index dd6c3b6826ec..1bba2e50c364 100644 --- a/Documentation/media/uapi/dvb/audio-stop.rst +++ b/Documentation/media/uapi/dvb/audio-stop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_STOP: diff --git a/Documentation/media/uapi/dvb/audio.rst b/Documentation/media/uapi/dvb/audio.rst index e9f9e589c486..ebc18fca76a4 100644 --- a/Documentation/media/uapi/dvb/audio.rst +++ b/Documentation/media/uapi/dvb/audio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_audio: diff --git a/Documentation/media/uapi/dvb/audio_data_types.rst b/Documentation/media/uapi/dvb/audio_data_types.rst index 5bffa2c98a24..5b032fe13b9d 100644 --- a/Documentation/media/uapi/dvb/audio_data_types.rst +++ b/Documentation/media/uapi/dvb/audio_data_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_data_types: diff --git a/Documentation/media/uapi/dvb/audio_function_calls.rst b/Documentation/media/uapi/dvb/audio_function_calls.rst index 7dba16285dab..5478e78b085e 100644 --- a/Documentation/media/uapi/dvb/audio_function_calls.rst +++ b/Documentation/media/uapi/dvb/audio_function_calls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_function_calls: diff --git a/Documentation/media/uapi/dvb/ca-fclose.rst b/Documentation/media/uapi/dvb/ca-fclose.rst index e84bbfcfa184..e273444ccc67 100644 --- a/Documentation/media/uapi/dvb/ca-fclose.rst +++ b/Documentation/media/uapi/dvb/ca-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_fclose: diff --git a/Documentation/media/uapi/dvb/ca-fopen.rst b/Documentation/media/uapi/dvb/ca-fopen.rst index 056c71b53a70..e11ebeae5693 100644 --- a/Documentation/media/uapi/dvb/ca-fopen.rst +++ b/Documentation/media/uapi/dvb/ca-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_fopen: diff --git a/Documentation/media/uapi/dvb/ca-get-cap.rst b/Documentation/media/uapi/dvb/ca-get-cap.rst index d2d5c1355396..9e4fb5186373 100644 --- a/Documentation/media/uapi/dvb/ca-get-cap.rst +++ b/Documentation/media/uapi/dvb/ca-get-cap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_CAP: diff --git a/Documentation/media/uapi/dvb/ca-get-descr-info.rst b/Documentation/media/uapi/dvb/ca-get-descr-info.rst index e564fbb8d524..80ef43a339df 100644 --- a/Documentation/media/uapi/dvb/ca-get-descr-info.rst +++ b/Documentation/media/uapi/dvb/ca-get-descr-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_DESCR_INFO: diff --git a/Documentation/media/uapi/dvb/ca-get-msg.rst b/Documentation/media/uapi/dvb/ca-get-msg.rst index ceeda623ce93..bcb7955a0ddc 100644 --- a/Documentation/media/uapi/dvb/ca-get-msg.rst +++ b/Documentation/media/uapi/dvb/ca-get-msg.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_MSG: diff --git a/Documentation/media/uapi/dvb/ca-get-slot-info.rst b/Documentation/media/uapi/dvb/ca-get-slot-info.rst index 1a1d6f0c71b9..1ea5c497f2ea 100644 --- a/Documentation/media/uapi/dvb/ca-get-slot-info.rst +++ b/Documentation/media/uapi/dvb/ca-get-slot-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_SLOT_INFO: diff --git a/Documentation/media/uapi/dvb/ca-reset.rst b/Documentation/media/uapi/dvb/ca-reset.rst index 29788325f90e..29fda19984be 100644 --- a/Documentation/media/uapi/dvb/ca-reset.rst +++ b/Documentation/media/uapi/dvb/ca-reset.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_RESET: diff --git a/Documentation/media/uapi/dvb/ca-send-msg.rst b/Documentation/media/uapi/dvb/ca-send-msg.rst index 9e91287b7bbc..5a3c4e8120c4 100644 --- a/Documentation/media/uapi/dvb/ca-send-msg.rst +++ b/Documentation/media/uapi/dvb/ca-send-msg.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_SEND_MSG: diff --git a/Documentation/media/uapi/dvb/ca-set-descr.rst b/Documentation/media/uapi/dvb/ca-set-descr.rst index a6c47205ffd8..22c8b8f94c7e 100644 --- a/Documentation/media/uapi/dvb/ca-set-descr.rst +++ b/Documentation/media/uapi/dvb/ca-set-descr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_SET_DESCR: diff --git a/Documentation/media/uapi/dvb/ca.rst b/Documentation/media/uapi/dvb/ca.rst index deac72d89e93..8796512c1378 100644 --- a/Documentation/media/uapi/dvb/ca.rst +++ b/Documentation/media/uapi/dvb/ca.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_ca: diff --git a/Documentation/media/uapi/dvb/ca_data_types.rst b/Documentation/media/uapi/dvb/ca_data_types.rst index ac7cbd76ddd5..834c8ab4c300 100644 --- a/Documentation/media/uapi/dvb/ca_data_types.rst +++ b/Documentation/media/uapi/dvb/ca_data_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_data_types: diff --git a/Documentation/media/uapi/dvb/ca_function_calls.rst b/Documentation/media/uapi/dvb/ca_function_calls.rst index 87d697851e82..6985bebd0661 100644 --- a/Documentation/media/uapi/dvb/ca_function_calls.rst +++ b/Documentation/media/uapi/dvb/ca_function_calls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_function_calls: diff --git a/Documentation/media/uapi/dvb/demux.rst b/Documentation/media/uapi/dvb/demux.rst index 45c3d6405c46..d8c0ff4015fe 100644 --- a/Documentation/media/uapi/dvb/demux.rst +++ b/Documentation/media/uapi/dvb/demux.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_demux: diff --git a/Documentation/media/uapi/dvb/dmx-add-pid.rst b/Documentation/media/uapi/dvb/dmx-add-pid.rst index 4d5632dfb43e..f483268e4ede 100644 --- a/Documentation/media/uapi/dvb/dmx-add-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-add-pid.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_ADD_PID: diff --git a/Documentation/media/uapi/dvb/dmx-expbuf.rst b/Documentation/media/uapi/dvb/dmx-expbuf.rst index 2d96cfe891df..d7f0658f3db3 100644 --- a/Documentation/media/uapi/dvb/dmx-expbuf.rst +++ b/Documentation/media/uapi/dvb/dmx-expbuf.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_EXPBUF: **************** diff --git a/Documentation/media/uapi/dvb/dmx-fclose.rst b/Documentation/media/uapi/dvb/dmx-fclose.rst index 578e929f4bde..05ff32270274 100644 --- a/Documentation/media/uapi/dvb/dmx-fclose.rst +++ b/Documentation/media/uapi/dvb/dmx-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fclose: diff --git a/Documentation/media/uapi/dvb/dmx-fopen.rst b/Documentation/media/uapi/dvb/dmx-fopen.rst index 55628a18ba67..2700a2fad68b 100644 --- a/Documentation/media/uapi/dvb/dmx-fopen.rst +++ b/Documentation/media/uapi/dvb/dmx-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fopen: diff --git a/Documentation/media/uapi/dvb/dmx-fread.rst b/Documentation/media/uapi/dvb/dmx-fread.rst index 488bdc4ba178..292fa98f39ff 100644 --- a/Documentation/media/uapi/dvb/dmx-fread.rst +++ b/Documentation/media/uapi/dvb/dmx-fread.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fread: diff --git a/Documentation/media/uapi/dvb/dmx-fwrite.rst b/Documentation/media/uapi/dvb/dmx-fwrite.rst index 519e5733e53b..bdd4d4743bd5 100644 --- a/Documentation/media/uapi/dvb/dmx-fwrite.rst +++ b/Documentation/media/uapi/dvb/dmx-fwrite.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fwrite: diff --git a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst index fbdbc12869d1..fcd3dc06c095 100644 --- a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst +++ b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_GET_PES_PIDS: diff --git a/Documentation/media/uapi/dvb/dmx-get-stc.rst b/Documentation/media/uapi/dvb/dmx-get-stc.rst index 604031f7904b..2c81595f470a 100644 --- a/Documentation/media/uapi/dvb/dmx-get-stc.rst +++ b/Documentation/media/uapi/dvb/dmx-get-stc.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_GET_STC: diff --git a/Documentation/media/uapi/dvb/dmx-mmap.rst b/Documentation/media/uapi/dvb/dmx-mmap.rst index 15d107348b9f..34bb7766718f 100644 --- a/Documentation/media/uapi/dvb/dmx-mmap.rst +++ b/Documentation/media/uapi/dvb/dmx-mmap.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _dmx-mmap: ***************** diff --git a/Documentation/media/uapi/dvb/dmx-munmap.rst b/Documentation/media/uapi/dvb/dmx-munmap.rst index d77218732bb6..ef26b6f2b12b 100644 --- a/Documentation/media/uapi/dvb/dmx-munmap.rst +++ b/Documentation/media/uapi/dvb/dmx-munmap.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _dmx-munmap: ************ diff --git a/Documentation/media/uapi/dvb/dmx-qbuf.rst b/Documentation/media/uapi/dvb/dmx-qbuf.rst index be5a4c6f1904..9a1d85147c25 100644 --- a/Documentation/media/uapi/dvb/dmx-qbuf.rst +++ b/Documentation/media/uapi/dvb/dmx-qbuf.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_QBUF: ************************* diff --git a/Documentation/media/uapi/dvb/dmx-querybuf.rst b/Documentation/media/uapi/dvb/dmx-querybuf.rst index 89481e24bb86..4cf36e821696 100644 --- a/Documentation/media/uapi/dvb/dmx-querybuf.rst +++ b/Documentation/media/uapi/dvb/dmx-querybuf.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_QUERYBUF: ****************** diff --git a/Documentation/media/uapi/dvb/dmx-remove-pid.rst b/Documentation/media/uapi/dvb/dmx-remove-pid.rst index 456cc2ded2c0..be992f44f306 100644 --- a/Documentation/media/uapi/dvb/dmx-remove-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-remove-pid.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_REMOVE_PID: diff --git a/Documentation/media/uapi/dvb/dmx-reqbufs.rst b/Documentation/media/uapi/dvb/dmx-reqbufs.rst index 14b80d60bf35..b302785bf678 100644 --- a/Documentation/media/uapi/dvb/dmx-reqbufs.rst +++ b/Documentation/media/uapi/dvb/dmx-reqbufs.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_REQBUFS: ***************** diff --git a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst index 74fd076a9b90..2dee0fb11f62 100644 --- a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst +++ b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_SET_BUFFER_SIZE: diff --git a/Documentation/media/uapi/dvb/dmx-set-filter.rst b/Documentation/media/uapi/dvb/dmx-set-filter.rst index 88594b8d3846..66afbb9f2fe4 100644 --- a/Documentation/media/uapi/dvb/dmx-set-filter.rst +++ b/Documentation/media/uapi/dvb/dmx-set-filter.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_SET_FILTER: diff --git a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst index d70e7bf96a41..dae5ab7878e5 100644 --- a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst +++ b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_SET_PES_FILTER: diff --git a/Documentation/media/uapi/dvb/dmx-start.rst b/Documentation/media/uapi/dvb/dmx-start.rst index 36700e775296..488289d02504 100644 --- a/Documentation/media/uapi/dvb/dmx-start.rst +++ b/Documentation/media/uapi/dvb/dmx-start.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_START: diff --git a/Documentation/media/uapi/dvb/dmx-stop.rst b/Documentation/media/uapi/dvb/dmx-stop.rst index 6d9c927bcd5f..982384d12923 100644 --- a/Documentation/media/uapi/dvb/dmx-stop.rst +++ b/Documentation/media/uapi/dvb/dmx-stop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_STOP: diff --git a/Documentation/media/uapi/dvb/dmx_fcalls.rst b/Documentation/media/uapi/dvb/dmx_fcalls.rst index 4c391cf2554f..67312ab65f94 100644 --- a/Documentation/media/uapi/dvb/dmx_fcalls.rst +++ b/Documentation/media/uapi/dvb/dmx_fcalls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fcalls: diff --git a/Documentation/media/uapi/dvb/dmx_types.rst b/Documentation/media/uapi/dvb/dmx_types.rst index 2a023a4f516c..b5cf704199e5 100644 --- a/Documentation/media/uapi/dvb/dmx_types.rst +++ b/Documentation/media/uapi/dvb/dmx_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_types: diff --git a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst index 212f032cad8b..172783b75fb7 100644 --- a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst +++ b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb-fe-read-status: diff --git a/Documentation/media/uapi/dvb/dvb-frontend-event.rst b/Documentation/media/uapi/dvb/dvb-frontend-event.rst index 2088bc6cacd8..ad4af66040c7 100644 --- a/Documentation/media/uapi/dvb/dvb-frontend-event.rst +++ b/Documentation/media/uapi/dvb/dvb-frontend-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. c:type:: dvb_frontend_event diff --git a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst index b152166f8fa7..67c2a316019f 100644 --- a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst +++ b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. c:type:: dvb_frontend_parameters diff --git a/Documentation/media/uapi/dvb/dvbapi.rst b/Documentation/media/uapi/dvb/dvbapi.rst index 89ddca38626f..0fcc01f182f9 100644 --- a/Documentation/media/uapi/dvb/dvbapi.rst +++ b/Documentation/media/uapi/dvb/dvbapi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst b/Documentation/media/uapi/dvb/dvbproperty.rst index 1a56c1724e59..371c72bb9419 100644 --- a/Documentation/media/uapi/dvb/dvbproperty.rst +++ b/Documentation/media/uapi/dvb/dvbproperty.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-properties: diff --git a/Documentation/media/uapi/dvb/dvbstb.svg b/Documentation/media/uapi/dvb/dvbstb.svg index f6fe2f837373..c7672148d6ff 100644 --- a/Documentation/media/uapi/dvb/dvbstb.svg +++ b/Documentation/media/uapi/dvb/dvbstb.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="15.847cm" height="8.4187cm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.123 12628.122" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><defs id="defs142"><marker id="Arrow1Lend" overflow="visible" orient="auto"><path id="path954" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker><marker id="marker1243" overflow="visible" orient="auto"><path id="path1241" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker></defs><metadata id="metadata519"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.122" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="none" stroke="#000"/><rect id="rect206" class="BoundingBox" x="13.122" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="1281.1219" y="5435.1221"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text> diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst index 16dd90fa9e94..eaa41bc8d173 100644 --- a/Documentation/media/uapi/dvb/examples.rst +++ b/Documentation/media/uapi/dvb/examples.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_examples: diff --git a/Documentation/media/uapi/dvb/fe-bandwidth-t.rst b/Documentation/media/uapi/dvb/fe-bandwidth-t.rst index 70256180e9b3..c3d7837b5f87 100644 --- a/Documentation/media/uapi/dvb/fe-bandwidth-t.rst +++ b/Documentation/media/uapi/dvb/fe-bandwidth-t.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************** Frontend bandwidth diff --git a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst index f220ee351e15..88fd2186ca4d 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_RECV_SLAVE_REPLY: diff --git a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst index 78476c1c7bf5..92929c2e75db 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_RESET_OVERLOAD: diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst index a7e05914efae..8af872d306aa 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_SEND_BURST: diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst index 6bd3994edfc2..30a48114153c 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_SEND_MASTER_CMD: diff --git a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst index dcf2d20d460f..13811289971b 100644 --- a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISHNETWORK_SEND_LEGACY_CMD: diff --git a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst index b20cb360fe37..32b7d140d80b 100644 --- a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst +++ b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_ENABLE_HIGH_LNB_VOLTAGE: diff --git a/Documentation/media/uapi/dvb/fe-get-event.rst b/Documentation/media/uapi/dvb/fe-get-event.rst index 505db94bf183..2573d5b9b636 100644 --- a/Documentation/media/uapi/dvb/fe-get-event.rst +++ b/Documentation/media/uapi/dvb/fe-get-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_EVENT: diff --git a/Documentation/media/uapi/dvb/fe-get-frontend.rst b/Documentation/media/uapi/dvb/fe-get-frontend.rst index 5db552cedd70..6cd5250d1832 100644 --- a/Documentation/media/uapi/dvb/fe-get-frontend.rst +++ b/Documentation/media/uapi/dvb/fe-get-frontend.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_FRONTEND: diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst index 49307c0abfee..551e68b11528 100644 --- a/Documentation/media/uapi/dvb/fe-get-info.rst +++ b/Documentation/media/uapi/dvb/fe-get-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_INFO: diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst index b69741d9cedf..99386c7461b3 100644 --- a/Documentation/media/uapi/dvb/fe-get-property.rst +++ b/Documentation/media/uapi/dvb/fe-get-property.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_PROPERTY: diff --git a/Documentation/media/uapi/dvb/fe-read-ber.rst b/Documentation/media/uapi/dvb/fe-read-ber.rst index 1e6a79567a4c..e579d648687e 100644 --- a/Documentation/media/uapi/dvb/fe-read-ber.rst +++ b/Documentation/media/uapi/dvb/fe-read-ber.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_BER: diff --git a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst index 198f6dfb53a1..0a0c0c2ff207 100644 --- a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst +++ b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_SIGNAL_STRENGTH: diff --git a/Documentation/media/uapi/dvb/fe-read-snr.rst b/Documentation/media/uapi/dvb/fe-read-snr.rst index 6db22c043512..2a7a0d8f1fd5 100644 --- a/Documentation/media/uapi/dvb/fe-read-snr.rst +++ b/Documentation/media/uapi/dvb/fe-read-snr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_SNR: diff --git a/Documentation/media/uapi/dvb/fe-read-status.rst b/Documentation/media/uapi/dvb/fe-read-status.rst index 4adb52f084ff..0dfc9fdf568f 100644 --- a/Documentation/media/uapi/dvb/fe-read-status.rst +++ b/Documentation/media/uapi/dvb/fe-read-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_STATUS: diff --git a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst index f2c688bcacb3..19c532f750aa 100644 --- a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst +++ b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_UNCORRECTED_BLOCKS: diff --git a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst index 3c4bc179b313..36e8913170e1 100644 --- a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst +++ b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_FRONTEND_TUNE_MODE: diff --git a/Documentation/media/uapi/dvb/fe-set-frontend.rst b/Documentation/media/uapi/dvb/fe-set-frontend.rst index 4f3dcf338254..23caae2588d2 100644 --- a/Documentation/media/uapi/dvb/fe-set-frontend.rst +++ b/Documentation/media/uapi/dvb/fe-set-frontend.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_FRONTEND: diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst index 758efa11014c..fb605e8c9fc4 100644 --- a/Documentation/media/uapi/dvb/fe-set-tone.rst +++ b/Documentation/media/uapi/dvb/fe-set-tone.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_TONE: diff --git a/Documentation/media/uapi/dvb/fe-set-voltage.rst b/Documentation/media/uapi/dvb/fe-set-voltage.rst index 38d4485290a0..c81a8e6a59aa 100644 --- a/Documentation/media/uapi/dvb/fe-set-voltage.rst +++ b/Documentation/media/uapi/dvb/fe-set-voltage.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_VOLTAGE: diff --git a/Documentation/media/uapi/dvb/fe-type-t.rst b/Documentation/media/uapi/dvb/fe-type-t.rst index dee32ae104d7..9720d2f7ba35 100644 --- a/Documentation/media/uapi/dvb/fe-type-t.rst +++ b/Documentation/media/uapi/dvb/fe-type-t.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ************* Frontend type diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst index 3524dcae4604..2fd2954d8dae 100644 --- a/Documentation/media/uapi/dvb/fe_property_parameters.rst +++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _fe_property_parameters: diff --git a/Documentation/media/uapi/dvb/frontend-header.rst b/Documentation/media/uapi/dvb/frontend-header.rst index 8d8433cf1e12..635fb4251214 100644 --- a/Documentation/media/uapi/dvb/frontend-header.rst +++ b/Documentation/media/uapi/dvb/frontend-header.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + Frontend uAPI data types ======================== diff --git a/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst b/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst index bf2328627af5..97fbfc228c10 100644 --- a/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst +++ b/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-property-cable-systems: diff --git a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst index 2929e6999a7a..2bc880a3c826 100644 --- a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst +++ b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-property-satellite-systems: diff --git a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst index 0beb5cb3d729..c20af13297e5 100644 --- a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst +++ b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-property-terrestrial-systems: diff --git a/Documentation/media/uapi/dvb/frontend-stat-properties.rst b/Documentation/media/uapi/dvb/frontend-stat-properties.rst index e73754fd0631..546464db04b5 100644 --- a/Documentation/media/uapi/dvb/frontend-stat-properties.rst +++ b/Documentation/media/uapi/dvb/frontend-stat-properties.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-stat-properties: diff --git a/Documentation/media/uapi/dvb/frontend.rst b/Documentation/media/uapi/dvb/frontend.rst index 4967c48d46ce..7ff225dfe11c 100644 --- a/Documentation/media/uapi/dvb/frontend.rst +++ b/Documentation/media/uapi/dvb/frontend.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_frontend: diff --git a/Documentation/media/uapi/dvb/frontend_f_close.rst b/Documentation/media/uapi/dvb/frontend_f_close.rst index 67958d73cf34..af87c2a83719 100644 --- a/Documentation/media/uapi/dvb/frontend_f_close.rst +++ b/Documentation/media/uapi/dvb/frontend_f_close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_f_close: diff --git a/Documentation/media/uapi/dvb/frontend_f_open.rst b/Documentation/media/uapi/dvb/frontend_f_open.rst index 8e8cb466c24b..6a46ec5acf7b 100644 --- a/Documentation/media/uapi/dvb/frontend_f_open.rst +++ b/Documentation/media/uapi/dvb/frontend_f_open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_f_open: diff --git a/Documentation/media/uapi/dvb/frontend_fcalls.rst b/Documentation/media/uapi/dvb/frontend_fcalls.rst index b03f9cab6d5a..9b3586f538ea 100644 --- a/Documentation/media/uapi/dvb/frontend_fcalls.rst +++ b/Documentation/media/uapi/dvb/frontend_fcalls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_fcalls: diff --git a/Documentation/media/uapi/dvb/frontend_legacy_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_api.rst index 759833d3eaa4..1ea749d09ca2 100644 --- a/Documentation/media/uapi/dvb/frontend_legacy_api.rst +++ b/Documentation/media/uapi/dvb/frontend_legacy_api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_legacy_types: diff --git a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst index a4d5319cb76b..1567bc73855a 100644 --- a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst +++ b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_legacy_dvbv3_api: diff --git a/Documentation/media/uapi/dvb/headers.rst b/Documentation/media/uapi/dvb/headers.rst index c13fd537fbff..edeabd9e8e90 100644 --- a/Documentation/media/uapi/dvb/headers.rst +++ b/Documentation/media/uapi/dvb/headers.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + **************************** Digital TV uAPI header files **************************** diff --git a/Documentation/media/uapi/dvb/intro.rst b/Documentation/media/uapi/dvb/intro.rst index 79b4d0e4e920..f1384616ac4e 100644 --- a/Documentation/media/uapi/dvb/intro.rst +++ b/Documentation/media/uapi/dvb/intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_introdution: diff --git a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst index e1b2c9c7b620..a43b4c36d935 100644 --- a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst +++ b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _legacy_dvb_apis: diff --git a/Documentation/media/uapi/dvb/net-add-if.rst b/Documentation/media/uapi/dvb/net-add-if.rst index 6749b70246c5..1188641b453e 100644 --- a/Documentation/media/uapi/dvb/net-add-if.rst +++ b/Documentation/media/uapi/dvb/net-add-if.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _NET_ADD_IF: diff --git a/Documentation/media/uapi/dvb/net-get-if.rst b/Documentation/media/uapi/dvb/net-get-if.rst index 3733b34da9db..7c4ef4b9d6cc 100644 --- a/Documentation/media/uapi/dvb/net-get-if.rst +++ b/Documentation/media/uapi/dvb/net-get-if.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _NET_GET_IF: diff --git a/Documentation/media/uapi/dvb/net-remove-if.rst b/Documentation/media/uapi/dvb/net-remove-if.rst index 4ebe07a6b79a..bf9a1602eeec 100644 --- a/Documentation/media/uapi/dvb/net-remove-if.rst +++ b/Documentation/media/uapi/dvb/net-remove-if.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _NET_REMOVE_IF: diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst index 8fa3292eaa42..9e16462a1ef4 100644 --- a/Documentation/media/uapi/dvb/net-types.rst +++ b/Documentation/media/uapi/dvb/net-types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _net_types: diff --git a/Documentation/media/uapi/dvb/net.rst b/Documentation/media/uapi/dvb/net.rst index e0cd4e402627..833daa381968 100644 --- a/Documentation/media/uapi/dvb/net.rst +++ b/Documentation/media/uapi/dvb/net.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _net: diff --git a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst index 51ec0b04b496..9a6badc1d295 100644 --- a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst +++ b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _query-dvb-frontend-info: diff --git a/Documentation/media/uapi/dvb/video-clear-buffer.rst b/Documentation/media/uapi/dvb/video-clear-buffer.rst index 2e51a78a69f1..5eb5546e8ce4 100644 --- a/Documentation/media/uapi/dvb/video-clear-buffer.rst +++ b/Documentation/media/uapi/dvb/video-clear-buffer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_CLEAR_BUFFER: diff --git a/Documentation/media/uapi/dvb/video-command.rst b/Documentation/media/uapi/dvb/video-command.rst index 536d0fdd8399..020b49645c6b 100644 --- a/Documentation/media/uapi/dvb/video-command.rst +++ b/Documentation/media/uapi/dvb/video-command.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_COMMAND: diff --git a/Documentation/media/uapi/dvb/video-continue.rst b/Documentation/media/uapi/dvb/video-continue.rst index e65e600be632..2ae2067dfba8 100644 --- a/Documentation/media/uapi/dvb/video-continue.rst +++ b/Documentation/media/uapi/dvb/video-continue.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_CONTINUE: diff --git a/Documentation/media/uapi/dvb/video-fast-forward.rst b/Documentation/media/uapi/dvb/video-fast-forward.rst index 70a53e110335..3f805f334ae1 100644 --- a/Documentation/media/uapi/dvb/video-fast-forward.rst +++ b/Documentation/media/uapi/dvb/video-fast-forward.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_FAST_FORWARD: diff --git a/Documentation/media/uapi/dvb/video-fclose.rst b/Documentation/media/uapi/dvb/video-fclose.rst index 8a997ae6f6a7..3b0285b96a3c 100644 --- a/Documentation/media/uapi/dvb/video-fclose.rst +++ b/Documentation/media/uapi/dvb/video-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_fclose: diff --git a/Documentation/media/uapi/dvb/video-fopen.rst b/Documentation/media/uapi/dvb/video-fopen.rst index 203a2c56f10a..7b2a8c750e6a 100644 --- a/Documentation/media/uapi/dvb/video-fopen.rst +++ b/Documentation/media/uapi/dvb/video-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_fopen: diff --git a/Documentation/media/uapi/dvb/video-freeze.rst b/Documentation/media/uapi/dvb/video-freeze.rst index 5a28bdc8badd..6b31a4755d2c 100644 --- a/Documentation/media/uapi/dvb/video-freeze.rst +++ b/Documentation/media/uapi/dvb/video-freeze.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_FREEZE: diff --git a/Documentation/media/uapi/dvb/video-fwrite.rst b/Documentation/media/uapi/dvb/video-fwrite.rst index cfe7c57dcfc7..eb35b79eb85c 100644 --- a/Documentation/media/uapi/dvb/video-fwrite.rst +++ b/Documentation/media/uapi/dvb/video-fwrite.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_fwrite: diff --git a/Documentation/media/uapi/dvb/video-get-capabilities.rst b/Documentation/media/uapi/dvb/video-get-capabilities.rst index 6987f659a1ad..971fdab70e15 100644 --- a/Documentation/media/uapi/dvb/video-get-capabilities.rst +++ b/Documentation/media/uapi/dvb/video-get-capabilities.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_CAPABILITIES: diff --git a/Documentation/media/uapi/dvb/video-get-event.rst b/Documentation/media/uapi/dvb/video-get-event.rst index b4f53616db9a..def6c40db601 100644 --- a/Documentation/media/uapi/dvb/video-get-event.rst +++ b/Documentation/media/uapi/dvb/video-get-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_EVENT: diff --git a/Documentation/media/uapi/dvb/video-get-frame-count.rst b/Documentation/media/uapi/dvb/video-get-frame-count.rst index 0ffe22cd6108..ef35da7d4861 100644 --- a/Documentation/media/uapi/dvb/video-get-frame-count.rst +++ b/Documentation/media/uapi/dvb/video-get-frame-count.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_FRAME_COUNT: diff --git a/Documentation/media/uapi/dvb/video-get-pts.rst b/Documentation/media/uapi/dvb/video-get-pts.rst index c73f86f1d35b..86ceefff7834 100644 --- a/Documentation/media/uapi/dvb/video-get-pts.rst +++ b/Documentation/media/uapi/dvb/video-get-pts.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_PTS: diff --git a/Documentation/media/uapi/dvb/video-get-size.rst b/Documentation/media/uapi/dvb/video-get-size.rst index d077fe2305a0..cc92189d31fd 100644 --- a/Documentation/media/uapi/dvb/video-get-size.rst +++ b/Documentation/media/uapi/dvb/video-get-size.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_SIZE: diff --git a/Documentation/media/uapi/dvb/video-get-status.rst b/Documentation/media/uapi/dvb/video-get-status.rst index ed6ea19827a6..8bfcf8fc3e19 100644 --- a/Documentation/media/uapi/dvb/video-get-status.rst +++ b/Documentation/media/uapi/dvb/video-get-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_STATUS: diff --git a/Documentation/media/uapi/dvb/video-play.rst b/Documentation/media/uapi/dvb/video-play.rst index 2124120aec22..fb3f4f168814 100644 --- a/Documentation/media/uapi/dvb/video-play.rst +++ b/Documentation/media/uapi/dvb/video-play.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_PLAY: diff --git a/Documentation/media/uapi/dvb/video-select-source.rst b/Documentation/media/uapi/dvb/video-select-source.rst index cde6542723ca..32cf025356dc 100644 --- a/Documentation/media/uapi/dvb/video-select-source.rst +++ b/Documentation/media/uapi/dvb/video-select-source.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SELECT_SOURCE: diff --git a/Documentation/media/uapi/dvb/video-set-blank.rst b/Documentation/media/uapi/dvb/video-set-blank.rst index 3858c69496a5..901c3c80f167 100644 --- a/Documentation/media/uapi/dvb/video-set-blank.rst +++ b/Documentation/media/uapi/dvb/video-set-blank.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_BLANK: diff --git a/Documentation/media/uapi/dvb/video-set-display-format.rst b/Documentation/media/uapi/dvb/video-set-display-format.rst index 2ef7401781be..ffdefa341207 100644 --- a/Documentation/media/uapi/dvb/video-set-display-format.rst +++ b/Documentation/media/uapi/dvb/video-set-display-format.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_DISPLAY_FORMAT: diff --git a/Documentation/media/uapi/dvb/video-set-format.rst b/Documentation/media/uapi/dvb/video-set-format.rst index 4239a4e365bb..63e60214ab37 100644 --- a/Documentation/media/uapi/dvb/video-set-format.rst +++ b/Documentation/media/uapi/dvb/video-set-format.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_FORMAT: diff --git a/Documentation/media/uapi/dvb/video-set-streamtype.rst b/Documentation/media/uapi/dvb/video-set-streamtype.rst index 02a3c2e4e67c..845486a6e049 100644 --- a/Documentation/media/uapi/dvb/video-set-streamtype.rst +++ b/Documentation/media/uapi/dvb/video-set-streamtype.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_STREAMTYPE: diff --git a/Documentation/media/uapi/dvb/video-slowmotion.rst b/Documentation/media/uapi/dvb/video-slowmotion.rst index bd3d1a4070d9..32c934aaf2ba 100644 --- a/Documentation/media/uapi/dvb/video-slowmotion.rst +++ b/Documentation/media/uapi/dvb/video-slowmotion.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SLOWMOTION: diff --git a/Documentation/media/uapi/dvb/video-stillpicture.rst b/Documentation/media/uapi/dvb/video-stillpicture.rst index 6f943f5e27bd..58035a7630e6 100644 --- a/Documentation/media/uapi/dvb/video-stillpicture.rst +++ b/Documentation/media/uapi/dvb/video-stillpicture.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_STILLPICTURE: diff --git a/Documentation/media/uapi/dvb/video-stop.rst b/Documentation/media/uapi/dvb/video-stop.rst index 474309ad31c2..732ace05e34b 100644 --- a/Documentation/media/uapi/dvb/video-stop.rst +++ b/Documentation/media/uapi/dvb/video-stop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_STOP: diff --git a/Documentation/media/uapi/dvb/video-try-command.rst b/Documentation/media/uapi/dvb/video-try-command.rst index 008e6a9ab696..37ecf8e91eb8 100644 --- a/Documentation/media/uapi/dvb/video-try-command.rst +++ b/Documentation/media/uapi/dvb/video-try-command.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_TRY_COMMAND: diff --git a/Documentation/media/uapi/dvb/video.rst b/Documentation/media/uapi/dvb/video.rst index e7d68cd0cf23..6d72ed0e2b2d 100644 --- a/Documentation/media/uapi/dvb/video.rst +++ b/Documentation/media/uapi/dvb/video.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_video: diff --git a/Documentation/media/uapi/dvb/video_function_calls.rst b/Documentation/media/uapi/dvb/video_function_calls.rst index a4222b6cd2d3..9e8e49e52b19 100644 --- a/Documentation/media/uapi/dvb/video_function_calls.rst +++ b/Documentation/media/uapi/dvb/video_function_calls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_function_calls: diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst index a0942171596c..2ed8aad84003 100644 --- a/Documentation/media/uapi/dvb/video_types.rst +++ b/Documentation/media/uapi/dvb/video_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_types: diff --git a/Documentation/media/uapi/fdl-appendix.rst b/Documentation/media/uapi/fdl-appendix.rst index fd475180fed8..f8dc85d3939c 100644 --- a/Documentation/media/uapi/fdl-appendix.rst +++ b/Documentation/media/uapi/fdl-appendix.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _fdl: diff --git a/Documentation/media/uapi/gen-errors.rst b/Documentation/media/uapi/gen-errors.rst index 689d3b101ede..043c312dc06d 100644 --- a/Documentation/media/uapi/gen-errors.rst +++ b/Documentation/media/uapi/gen-errors.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _gen_errors: diff --git a/Documentation/media/uapi/mediactl/media-controller-intro.rst b/Documentation/media/uapi/mediactl/media-controller-intro.rst index 3e776c0d8276..281c559c2f3c 100644 --- a/Documentation/media/uapi/mediactl/media-controller-intro.rst +++ b/Documentation/media/uapi/mediactl/media-controller-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-controller-intro: diff --git a/Documentation/media/uapi/mediactl/media-controller-model.rst b/Documentation/media/uapi/mediactl/media-controller-model.rst index 558273cf9570..b6d5902b556d 100644 --- a/Documentation/media/uapi/mediactl/media-controller-model.rst +++ b/Documentation/media/uapi/mediactl/media-controller-model.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-controller-model: diff --git a/Documentation/media/uapi/mediactl/media-controller.rst b/Documentation/media/uapi/mediactl/media-controller.rst index 66aff38cd499..6e624f690331 100644 --- a/Documentation/media/uapi/mediactl/media-controller.rst +++ b/Documentation/media/uapi/mediactl/media-controller.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/mediactl/media-func-close.rst b/Documentation/media/uapi/mediactl/media-func-close.rst index a8f5203afe4b..369ccd4dee56 100644 --- a/Documentation/media/uapi/mediactl/media-func-close.rst +++ b/Documentation/media/uapi/mediactl/media-func-close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-func-close: diff --git a/Documentation/media/uapi/mediactl/media-func-ioctl.rst b/Documentation/media/uapi/mediactl/media-func-ioctl.rst index fe072b7c8765..9a990d6480f5 100644 --- a/Documentation/media/uapi/mediactl/media-func-ioctl.rst +++ b/Documentation/media/uapi/mediactl/media-func-ioctl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-func-ioctl: diff --git a/Documentation/media/uapi/mediactl/media-func-open.rst b/Documentation/media/uapi/mediactl/media-func-open.rst index 32f53016a9e5..cd2f840ddf73 100644 --- a/Documentation/media/uapi/mediactl/media-func-open.rst +++ b/Documentation/media/uapi/mediactl/media-func-open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-func-open: diff --git a/Documentation/media/uapi/mediactl/media-funcs.rst b/Documentation/media/uapi/mediactl/media-funcs.rst index 260f9dcadcde..87b65df8252a 100644 --- a/Documentation/media/uapi/mediactl/media-funcs.rst +++ b/Documentation/media/uapi/mediactl/media-funcs.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _media-user-func: ****************** diff --git a/Documentation/media/uapi/mediactl/media-header.rst b/Documentation/media/uapi/mediactl/media-header.rst index 96f7b0155e5a..1cb7c88aeff0 100644 --- a/Documentation/media/uapi/mediactl/media-header.rst +++ b/Documentation/media/uapi/mediactl/media-header.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_header: diff --git a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst index c6f224e404b7..f8038cfb708c 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_device_info: diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst index 02738640e34e..6218d9cbdd83 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_enum_entities: diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst index b89aaae373df..a982f16e55a4 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_enum_links: diff --git a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst index 4e1c59238371..0a7d76ac8ded 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_g_topology: diff --git a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst index 0f8b31874002..6d4ca4ada2e0 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_request_alloc: diff --git a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst b/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst index e345e7dc9ad7..ae39dbbe48a0 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_setup_link: diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst index 6dd2d7fea714..fc8458746d51 100644 --- a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst +++ b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_request_ioc_queue: diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst index febe888494c8..61381e87665a 100644 --- a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst +++ b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_request_ioc_reinit: diff --git a/Documentation/media/uapi/mediactl/media-types.rst b/Documentation/media/uapi/mediactl/media-types.rst index e4c57c8f4553..8627587b7075 100644 --- a/Documentation/media/uapi/mediactl/media-types.rst +++ b/Documentation/media/uapi/mediactl/media-types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-controller-types: diff --git a/Documentation/media/uapi/mediactl/request-api.rst b/Documentation/media/uapi/mediactl/request-api.rst index 5f4a23029c48..4b25ad03f45a 100644 --- a/Documentation/media/uapi/mediactl/request-api.rst +++ b/Documentation/media/uapi/mediactl/request-api.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media-request-api: diff --git a/Documentation/media/uapi/mediactl/request-func-close.rst b/Documentation/media/uapi/mediactl/request-func-close.rst index 098d7f2b9548..2cff7770558e 100644 --- a/Documentation/media/uapi/mediactl/request-func-close.rst +++ b/Documentation/media/uapi/mediactl/request-func-close.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-close: diff --git a/Documentation/media/uapi/mediactl/request-func-ioctl.rst b/Documentation/media/uapi/mediactl/request-func-ioctl.rst index ff7b072a6999..de0781c61873 100644 --- a/Documentation/media/uapi/mediactl/request-func-ioctl.rst +++ b/Documentation/media/uapi/mediactl/request-func-ioctl.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-ioctl: diff --git a/Documentation/media/uapi/mediactl/request-func-poll.rst b/Documentation/media/uapi/mediactl/request-func-poll.rst index 85191254f381..ebaf33e21873 100644 --- a/Documentation/media/uapi/mediactl/request-func-poll.rst +++ b/Documentation/media/uapi/mediactl/request-func-poll.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-poll: diff --git a/Documentation/media/uapi/rc/keytable.c.rst b/Documentation/media/uapi/rc/keytable.c.rst index 217237f93b37..46f98569e999 100644 --- a/Documentation/media/uapi/rc/keytable.c.rst +++ b/Documentation/media/uapi/rc/keytable.c.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections file: uapi/v4l/keytable.c ========================= diff --git a/Documentation/media/uapi/rc/lirc-dev-intro.rst b/Documentation/media/uapi/rc/lirc-dev-intro.rst index 11516c8bff62..1a901d8e1797 100644 --- a/Documentation/media/uapi/rc/lirc-dev-intro.rst +++ b/Documentation/media/uapi/rc/lirc-dev-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_dev_intro: diff --git a/Documentation/media/uapi/rc/lirc-dev.rst b/Documentation/media/uapi/rc/lirc-dev.rst index 03cde25f5859..7058e0b2296a 100644 --- a/Documentation/media/uapi/rc/lirc-dev.rst +++ b/Documentation/media/uapi/rc/lirc-dev.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_dev: diff --git a/Documentation/media/uapi/rc/lirc-func.rst b/Documentation/media/uapi/rc/lirc-func.rst index ddb4620de294..25058369f724 100644 --- a/Documentation/media/uapi/rc/lirc-func.rst +++ b/Documentation/media/uapi/rc/lirc-func.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_func: diff --git a/Documentation/media/uapi/rc/lirc-get-features.rst b/Documentation/media/uapi/rc/lirc-get-features.rst index 889a8807037b..1d590df8164a 100644 --- a/Documentation/media/uapi/rc/lirc-get-features.rst +++ b/Documentation/media/uapi/rc/lirc-get-features.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_features: diff --git a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst b/Documentation/media/uapi/rc/lirc-get-rec-mode.rst index 2722118484fa..0a3e02aca80e 100644 --- a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst +++ b/Documentation/media/uapi/rc/lirc-get-rec-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_rec_mode: .. _lirc_set_rec_mode: diff --git a/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst b/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst index 6e016edc2bc4..f560b694ccf2 100644 --- a/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst +++ b/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_rec_resolution: diff --git a/Documentation/media/uapi/rc/lirc-get-send-mode.rst b/Documentation/media/uapi/rc/lirc-get-send-mode.rst index c44e61a79ad1..4f440c697052 100644 --- a/Documentation/media/uapi/rc/lirc-get-send-mode.rst +++ b/Documentation/media/uapi/rc/lirc-get-send-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_send_mode: .. _lirc_set_send_mode: diff --git a/Documentation/media/uapi/rc/lirc-get-timeout.rst b/Documentation/media/uapi/rc/lirc-get-timeout.rst index c94bc5dcaa8e..1de214529f27 100644 --- a/Documentation/media/uapi/rc/lirc-get-timeout.rst +++ b/Documentation/media/uapi/rc/lirc-get-timeout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_min_timeout: .. _lirc_get_max_timeout: diff --git a/Documentation/media/uapi/rc/lirc-header.rst b/Documentation/media/uapi/rc/lirc-header.rst index 487fe00e5517..c9b4f33e1031 100644 --- a/Documentation/media/uapi/rc/lirc-header.rst +++ b/Documentation/media/uapi/rc/lirc-header.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_header: diff --git a/Documentation/media/uapi/rc/lirc-read.rst b/Documentation/media/uapi/rc/lirc-read.rst index c024aaffb8ad..a8fedfaaf0ab 100644 --- a/Documentation/media/uapi/rc/lirc-read.rst +++ b/Documentation/media/uapi/rc/lirc-read.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc-read: diff --git a/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst b/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst index 6307b5715595..c80acd85e369 100644 --- a/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst +++ b/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_measure_carrier_mode: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst b/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst index a89246806c4b..443681d5cc10 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_carrier_range: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst b/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst index a411c0330818..cbe1e48b2a4a 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_carrier: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst b/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst index 86353e602695..d06d69414c1e 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_timeout_reports: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst b/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst index a833a6a4c25a..163ac6065737 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_timeout: .. _lirc_get_rec_timeout: diff --git a/Documentation/media/uapi/rc/lirc-set-send-carrier.rst b/Documentation/media/uapi/rc/lirc-set-send-carrier.rst index 42c8cfb42df5..cffc6c1e15cc 100644 --- a/Documentation/media/uapi/rc/lirc-set-send-carrier.rst +++ b/Documentation/media/uapi/rc/lirc-set-send-carrier.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_send_carrier: diff --git a/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst b/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst index 20d07c2a37a5..08ab3d1a96cd 100644 --- a/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst +++ b/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_send_duty_cycle: diff --git a/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst b/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst index 69b7ad8c2afb..889a739eaf0d 100644 --- a/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst +++ b/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_transmitter_mask: diff --git a/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst b/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst index 0415c6a54f23..592715452fce 100644 --- a/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst +++ b/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_wideband_receiver: diff --git a/Documentation/media/uapi/rc/lirc-write.rst b/Documentation/media/uapi/rc/lirc-write.rst index d4566b0a2015..6adf5ddbac99 100644 --- a/Documentation/media/uapi/rc/lirc-write.rst +++ b/Documentation/media/uapi/rc/lirc-write.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc-write: diff --git a/Documentation/media/uapi/rc/rc-intro.rst b/Documentation/media/uapi/rc/rc-intro.rst index 3707c29d37ed..37c5f90c76e7 100644 --- a/Documentation/media/uapi/rc/rc-intro.rst +++ b/Documentation/media/uapi/rc/rc-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _Remote_controllers_Intro: diff --git a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst index 2d01358d5504..b8e8319e3317 100644 --- a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst +++ b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _remote_controllers_sysfs_nodes: diff --git a/Documentation/media/uapi/rc/rc-table-change.rst b/Documentation/media/uapi/rc/rc-table-change.rst index d604896bca87..4a2e601b89fb 100644 --- a/Documentation/media/uapi/rc/rc-table-change.rst +++ b/Documentation/media/uapi/rc/rc-table-change.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _Remote_controllers_table_change: diff --git a/Documentation/media/uapi/rc/rc-tables.rst b/Documentation/media/uapi/rc/rc-tables.rst index c8ae9479f842..cb670d10998b 100644 --- a/Documentation/media/uapi/rc/rc-tables.rst +++ b/Documentation/media/uapi/rc/rc-tables.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _Remote_controllers_tables: diff --git a/Documentation/media/uapi/rc/remote_controllers.rst b/Documentation/media/uapi/rc/remote_controllers.rst index 46a8acb82125..3051f7abe11d 100644 --- a/Documentation/media/uapi/rc/remote_controllers.rst +++ b/Documentation/media/uapi/rc/remote_controllers.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/v4l/app-pri.rst b/Documentation/media/uapi/v4l/app-pri.rst index a8c41a7ec396..c25c1271b4f6 100644 --- a/Documentation/media/uapi/v4l/app-pri.rst +++ b/Documentation/media/uapi/v4l/app-pri.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _app-pri: @@ -8,7 +15,7 @@ Application Priority When multiple applications share a device it may be desirable to assign them different priorities. Contrary to the traditional "rm -rf /" school -of thought a video recording application could for example block other +of thought, a video recording application could for example block other applications from changing video controls or switching the current TV channel. Another objective is to permit low priority applications working in background, which can be preempted by user controlled diff --git a/Documentation/media/uapi/v4l/async.rst b/Documentation/media/uapi/v4l/async.rst index 5affc0adb95b..be9539313f60 100644 --- a/Documentation/media/uapi/v4l/async.rst +++ b/Documentation/media/uapi/v4l/async.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _async: diff --git a/Documentation/media/uapi/v4l/audio.rst b/Documentation/media/uapi/v4l/audio.rst index 5ec99a2809fe..4c7fdbc8a860 100644 --- a/Documentation/media/uapi/v4l/audio.rst +++ b/Documentation/media/uapi/v4l/audio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio: @@ -31,7 +38,7 @@ outputs applications can enumerate them with the :ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>` ioctl, respectively. The struct :c:type:`v4l2_audio` returned by the :ref:`VIDIOC_ENUMAUDIO` ioctl also contains signal -:status information applicable when the current audio input is queried. +status information applicable when the current audio input is queried. The :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` and :ref:`VIDIOC_G_AUDOUT <VIDIOC_G_AUDOUT>` ioctls report the current diff --git a/Documentation/media/uapi/v4l/bayer.svg b/Documentation/media/uapi/v4l/bayer.svg index c395113d1876..c5bf85103901 100644 --- a/Documentation/media/uapi/v4l/bayer.svg +++ b/Documentation/media/uapi/v4l/bayer.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="164.15mm" height="46.771mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 16415.333 4677.1107" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata652"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><g id="g186" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id6"><rect id="rect189" class="BoundingBox" x="3299" y="3199" width="1303" height="1203" fill="none"/><path id="path191" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path193" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text195" class="TextShape"><tspan id="tspan197" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan199" class="TextPosition" x="3739" y="4021"><tspan id="tspan201" fill="#ffffff">B</tspan></tspan></tspan></text> </g></g><g id="g203" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id7"><rect id="rect206" class="BoundingBox" x="4599" y="3199" width="1303" height="1203" fill="none"/><path id="path208" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path210" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text212" class="TextShape"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="5003" y="4021"><tspan id="tspan218" fill="#ffffff">G</tspan></tspan></tspan></text> diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst index 386d6cf83e9c..ec33768c055e 100644 --- a/Documentation/media/uapi/v4l/biblio.rst +++ b/Documentation/media/uapi/v4l/biblio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ********** References diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst index 2e266d32470a..86878bb0087f 100644 --- a/Documentation/media/uapi/v4l/buffer.rst +++ b/Documentation/media/uapi/v4l/buffer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _buffer: @@ -465,6 +472,9 @@ enum v4l2_buf_type * - ``V4L2_BUF_TYPE_META_CAPTURE`` - 13 - Buffer for metadata capture, see :ref:`metadata`. + * - ``V4L2_BUF_TYPE_META_OUTPUT`` + - 14 + - Buffer for metadata output, see :ref:`metadata`. diff --git a/Documentation/media/uapi/v4l/capture-example.rst b/Documentation/media/uapi/v4l/capture-example.rst index ac1cd057e25b..130ca47ef796 100644 --- a/Documentation/media/uapi/v4l/capture-example.rst +++ b/Documentation/media/uapi/v4l/capture-example.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _capture-example: diff --git a/Documentation/media/uapi/v4l/capture.c.rst b/Documentation/media/uapi/v4l/capture.c.rst index 56525a0fb2fa..b4652c2351f2 100644 --- a/Documentation/media/uapi/v4l/capture.c.rst +++ b/Documentation/media/uapi/v4l/capture.c.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections file: media/v4l/capture.c ========================= diff --git a/Documentation/media/uapi/v4l/colorspaces-defs.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst index f24615544792..c4e8fc620379 100644 --- a/Documentation/media/uapi/v4l/colorspaces-defs.rst +++ b/Documentation/media/uapi/v4l/colorspaces-defs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections **************************** Defining Colorspaces in V4L2 diff --git a/Documentation/media/uapi/v4l/colorspaces-details.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst index 09fabf4cd412..8b0ba3668101 100644 --- a/Documentation/media/uapi/v4l/colorspaces-details.rst +++ b/Documentation/media/uapi/v4l/colorspaces-details.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ******************************** Detailed Colorspace Descriptions diff --git a/Documentation/media/uapi/v4l/colorspaces.rst b/Documentation/media/uapi/v4l/colorspaces.rst index 322eb94c1d44..c5a560f0c13d 100644 --- a/Documentation/media/uapi/v4l/colorspaces.rst +++ b/Documentation/media/uapi/v4l/colorspaces.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _colorspaces: diff --git a/Documentation/media/uapi/v4l/common-defs.rst b/Documentation/media/uapi/v4l/common-defs.rst index 39058216b630..504c6c93c9b0 100644 --- a/Documentation/media/uapi/v4l/common-defs.rst +++ b/Documentation/media/uapi/v4l/common-defs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _common-defs: diff --git a/Documentation/media/uapi/v4l/common.rst b/Documentation/media/uapi/v4l/common.rst index 5f93e71122ef..889f2f2632a1 100644 --- a/Documentation/media/uapi/v4l/common.rst +++ b/Documentation/media/uapi/v4l/common.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _common: diff --git a/Documentation/media/uapi/v4l/compat.rst b/Documentation/media/uapi/v4l/compat.rst index 8b5e1cebd8f4..f35575a300b4 100644 --- a/Documentation/media/uapi/v4l/compat.rst +++ b/Documentation/media/uapi/v4l/compat.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _compat: diff --git a/Documentation/media/uapi/v4l/constraints.svg b/Documentation/media/uapi/v4l/constraints.svg index 7e5d7185ca49..08f9f8b0985e 100644 --- a/Documentation/media/uapi/v4l/constraints.svg +++ b/Documentation/media/uapi/v4l/constraints.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible" orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible" orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301" diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst index c1e6adbe83d7..0d46526b5935 100644 --- a/Documentation/media/uapi/v4l/control.rst +++ b/Documentation/media/uapi/v4l/control.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _control: diff --git a/Documentation/media/uapi/v4l/crop.rst b/Documentation/media/uapi/v4l/crop.rst index 45e8a895a320..ada7c22e6291 100644 --- a/Documentation/media/uapi/v4l/crop.rst +++ b/Documentation/media/uapi/v4l/crop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _crop: diff --git a/Documentation/media/uapi/v4l/crop.svg b/Documentation/media/uapi/v4l/crop.svg index 3878fe4c49e9..32d72598d135 100644 --- a/Documentation/media/uapi/v4l/crop.svg +++ b/Documentation/media/uapi/v4l/crop.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/depth-formats.rst b/Documentation/media/uapi/v4l/depth-formats.rst index d1641e9687a6..1bfd0b82cb85 100644 --- a/Documentation/media/uapi/v4l/depth-formats.rst +++ b/Documentation/media/uapi/v4l/depth-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _depth-formats: @@ -14,3 +21,4 @@ Depth data provides distance to points, mapped onto the image plane pixfmt-inzi pixfmt-z16 + pixfmt-cnf4 diff --git a/Documentation/media/uapi/v4l/dev-capture.rst b/Documentation/media/uapi/v4l/dev-capture.rst index 4218742ab5d9..134e22b32338 100644 --- a/Documentation/media/uapi/v4l/dev-capture.rst +++ b/Documentation/media/uapi/v4l/dev-capture.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _capture: @@ -99,6 +106,6 @@ requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_F Reading Images ============== -A video capture device may support the ::ref:`read() function <func-read>` +A video capture device may support the :ref:`read() function <func-read>` and/or streaming (:ref:`memory mapping <func-mmap>` or :ref:`user pointer <userp>`) I/O. See :ref:`io` for details. diff --git a/Documentation/media/uapi/v4l/dev-codec.rst b/Documentation/media/uapi/v4l/dev-codec.rst index c61e938bd8dc..b5e017c17834 100644 --- a/Documentation/media/uapi/v4l/dev-codec.rst +++ b/Documentation/media/uapi/v4l/dev-codec.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _codec: diff --git a/Documentation/media/uapi/v4l/dev-effect.rst b/Documentation/media/uapi/v4l/dev-effect.rst index b946cc9e1064..b165e2c20910 100644 --- a/Documentation/media/uapi/v4l/dev-effect.rst +++ b/Documentation/media/uapi/v4l/dev-effect.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _effect: diff --git a/Documentation/media/uapi/v4l/dev-event.rst b/Documentation/media/uapi/v4l/dev-event.rst index a06ec4d65359..6029101fe1d7 100644 --- a/Documentation/media/uapi/v4l/dev-event.rst +++ b/Documentation/media/uapi/v4l/dev-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _event: diff --git a/Documentation/media/uapi/v4l/dev-meta.rst b/Documentation/media/uapi/v4l/dev-meta.rst index f7ac8d0d3af1..c5dbe882be65 100644 --- a/Documentation/media/uapi/v4l/dev-meta.rst +++ b/Documentation/media/uapi/v4l/dev-meta.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _metadata: @@ -7,21 +14,27 @@ Metadata Interface ****************** Metadata refers to any non-image data that supplements video frames with -additional information. This may include statistics computed over the image -or frame capture parameters supplied by the image source. This interface is -intended for transfer of metadata to userspace and control of that operation. +additional information. This may include statistics computed over the image, +frame capture parameters supplied by the image source or device specific +parameters for specifying how the device processes images. This interface is +intended for transfer of metadata between the userspace and the hardware and +control of that operation. -The metadata interface is implemented on video capture device nodes. The device -can be dedicated to metadata or can implement both video and metadata capture -as specified in its reported capabilities. +The metadata interface is implemented on video device nodes. The device can be +dedicated to metadata or can support both video and metadata as specified in its +reported capabilities. Querying Capabilities ===================== -Device nodes supporting the metadata interface set the ``V4L2_CAP_META_CAPTURE`` -flag in the ``device_caps`` field of the +Device nodes supporting the metadata capture interface set the +``V4L2_CAP_META_CAPTURE`` flag in the ``device_caps`` field of the :c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP` -ioctl. That flag means the device can capture metadata to memory. +ioctl. That flag means the device can capture metadata to memory. Similarly, +device nodes supporting metadata output interface set the +``V4L2_CAP_META_OUTPUT`` flag in the ``device_caps`` field of +:c:type:`v4l2_capability` structure. That flag means the device can read +metadata from memory. At least one of the read/write or streaming I/O methods must be supported. @@ -35,12 +48,13 @@ to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be supported as well. To use the :ref:`format` ioctls applications set the ``type`` field of the -:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_META_CAPTURE`` and use the -:c:type:`v4l2_meta_format` ``meta`` member of the ``fmt`` union as needed per -the desired operation. Both drivers and applications must set the remainder of -the :c:type:`v4l2_format` structure to 0. +:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_META_CAPTURE`` or to +``V4L2_BUF_TYPE_META_OUTPUT`` and use the :c:type:`v4l2_meta_format` ``meta`` +member of the ``fmt`` union as needed per the desired operation. Both drivers +and applications must set the remainder of the :c:type:`v4l2_format` structure +to 0. -.. _v4l2-meta-format: +.. c:type:: v4l2_meta_format .. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}| diff --git a/Documentation/media/uapi/v4l/dev-osd.rst b/Documentation/media/uapi/v4l/dev-osd.rst index 71da85ed7e4b..d3ad67da6386 100644 --- a/Documentation/media/uapi/v4l/dev-osd.rst +++ b/Documentation/media/uapi/v4l/dev-osd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _osd: diff --git a/Documentation/media/uapi/v4l/dev-output.rst b/Documentation/media/uapi/v4l/dev-output.rst index 342eb4931f5c..3fe1b39696ed 100644 --- a/Documentation/media/uapi/v4l/dev-output.rst +++ b/Documentation/media/uapi/v4l/dev-output.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _output: diff --git a/Documentation/media/uapi/v4l/dev-overlay.rst b/Documentation/media/uapi/v4l/dev-overlay.rst index 9be14b55e305..b91b3837d4e7 100644 --- a/Documentation/media/uapi/v4l/dev-overlay.rst +++ b/Documentation/media/uapi/v4l/dev-overlay.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _overlay: diff --git a/Documentation/media/uapi/v4l/dev-radio.rst b/Documentation/media/uapi/v4l/dev-radio.rst index 2b5b836574eb..133eb0e788c2 100644 --- a/Documentation/media/uapi/v4l/dev-radio.rst +++ b/Documentation/media/uapi/v4l/dev-radio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _radio: diff --git a/Documentation/media/uapi/v4l/dev-raw-vbi.rst b/Documentation/media/uapi/v4l/dev-raw-vbi.rst index 2e6878b624f6..d6a707f0b24f 100644 --- a/Documentation/media/uapi/v4l/dev-raw-vbi.rst +++ b/Documentation/media/uapi/v4l/dev-raw-vbi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _raw-vbi: diff --git a/Documentation/media/uapi/v4l/dev-rds.rst b/Documentation/media/uapi/v4l/dev-rds.rst index 9c4e39dd66bd..624d6f95b842 100644 --- a/Documentation/media/uapi/v4l/dev-rds.rst +++ b/Documentation/media/uapi/v4l/dev-rds.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _rds: diff --git a/Documentation/media/uapi/v4l/dev-sdr.rst b/Documentation/media/uapi/v4l/dev-sdr.rst index b3e828d8cb1f..75595c58cb5b 100644 --- a/Documentation/media/uapi/v4l/dev-sdr.rst +++ b/Documentation/media/uapi/v4l/dev-sdr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _sdr: diff --git a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst index d311a6866b3b..0aa6cb8a272b 100644 --- a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst +++ b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _sliced: diff --git a/Documentation/media/uapi/v4l/dev-subdev.rst b/Documentation/media/uapi/v4l/dev-subdev.rst index d20d945803a7..2c2768c7343b 100644 --- a/Documentation/media/uapi/v4l/dev-subdev.rst +++ b/Documentation/media/uapi/v4l/dev-subdev.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _subdev: diff --git a/Documentation/media/uapi/v4l/dev-teletext.rst b/Documentation/media/uapi/v4l/dev-teletext.rst index 2648f6b37ea3..35e8c4b35458 100644 --- a/Documentation/media/uapi/v4l/dev-teletext.rst +++ b/Documentation/media/uapi/v4l/dev-teletext.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ttx: @@ -10,7 +17,7 @@ This interface was aimed at devices receiving and demodulating Teletext data [:ref:`ets300706`, :ref:`itu653`], evaluating the Teletext packages and storing formatted pages in cache memory. Such devices are usually implemented as microcontrollers with serial interface -(I:sup:`2`\ C) and could be found on old TV cards, dedicated Teletext +(I\ :sup:`2`\ C) and could be found on old TV cards, dedicated Teletext decoding cards and home-brew devices connected to the PC parallel port. The Teletext API was designed by Martin Buck. It was defined in the diff --git a/Documentation/media/uapi/v4l/dev-touch.rst b/Documentation/media/uapi/v4l/dev-touch.rst index 98797f255ce0..356f01385221 100644 --- a/Documentation/media/uapi/v4l/dev-touch.rst +++ b/Documentation/media/uapi/v4l/dev-touch.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _touch: diff --git a/Documentation/media/uapi/v4l/devices.rst b/Documentation/media/uapi/v4l/devices.rst index fb7f8c26cf09..5dbe9d13b6e6 100644 --- a/Documentation/media/uapi/v4l/devices.rst +++ b/Documentation/media/uapi/v4l/devices.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _devices: diff --git a/Documentation/media/uapi/v4l/diff-v4l.rst b/Documentation/media/uapi/v4l/diff-v4l.rst index 8209eeb63dd2..dd6739e8a5b2 100644 --- a/Documentation/media/uapi/v4l/diff-v4l.rst +++ b/Documentation/media/uapi/v4l/diff-v4l.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _diff-v4l: diff --git a/Documentation/media/uapi/v4l/dmabuf.rst b/Documentation/media/uapi/v4l/dmabuf.rst index 4e980a7e9c9c..bb8fd943b14e 100644 --- a/Documentation/media/uapi/v4l/dmabuf.rst +++ b/Documentation/media/uapi/v4l/dmabuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmabuf: diff --git a/Documentation/media/uapi/v4l/dv-timings.rst b/Documentation/media/uapi/v4l/dv-timings.rst index 415a0c4e2ccb..b3c69ca559e2 100644 --- a/Documentation/media/uapi/v4l/dv-timings.rst +++ b/Documentation/media/uapi/v4l/dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dv-timings: diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 65a1d873196b..286a2dd7ec36 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _extended-controls: @@ -1110,10 +1117,16 @@ enum v4l2_mpeg_video_h264_loop_filter_mode - ``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (integer)`` Loop filter alpha coefficient, defined in the H264 standard. + This value corresponds to the slice_alpha_c0_offset_div2 slice header + field, and should be in the range of -6 to +6, inclusive. The actual alpha + offset FilterOffsetA is twice this value. Applicable to the H264 encoder. ``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (integer)`` Loop filter beta coefficient, defined in the H264 standard. + This corresponds to the slice_beta_offset_div2 slice header field, and + should be in the range of -6 to +6, inclusive. The actual beta offset + FilterOffsetB is twice this value. Applicable to the H264 encoder. .. _v4l2-mpeg-video-h264-entropy-mode: @@ -1505,6 +1518,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - configuring a stateless hardware decoding pipeline for MPEG-2. The bitstream parameters are defined according to :ref:`mpeg2part2`. + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + .. c:type:: v4l2_ctrl_mpeg2_slice_params .. cssclass:: longtable @@ -1625,6 +1643,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Specifies quantization matrices (as extracted from the bitstream) for the associated MPEG-2 slice data. + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + .. c:type:: v4l2_ctrl_mpeg2_quantization .. cssclass:: longtable @@ -3980,7 +4003,7 @@ demodulator. It receives radio frequency (RF) from the antenna and converts that received signal to lower intermediate frequency (IF) or baseband frequency (BB). Tuners that could do baseband output are often called Zero-IF tuners. Older tuners were typically simple PLL tuners -inside a metal box, whilst newer ones are highly integrated chips +inside a metal box, while newer ones are highly integrated chips without a metal box "silicon tuners". These controls are mostly applicable for new feature rich silicon tuners, just because older tuners does not have much adjustable features. diff --git a/Documentation/media/uapi/v4l/field-order.rst b/Documentation/media/uapi/v4l/field-order.rst index 5f3f82cbfa34..8415268d439c 100644 --- a/Documentation/media/uapi/v4l/field-order.rst +++ b/Documentation/media/uapi/v4l/field-order.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _field-order: diff --git a/Documentation/media/uapi/v4l/fieldseq_bt.svg b/Documentation/media/uapi/v4l/fieldseq_bt.svg index 909d758f8543..1dab1cd1b6de 100644 --- a/Documentation/media/uapi/v4l/fieldseq_bt.svg +++ b/Documentation/media/uapi/v4l/fieldseq_bt.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -2610,4 +2618,4 @@ sodipodi:role="line" y="-328.99481" x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/fieldseq_tb.svg b/Documentation/media/uapi/v4l/fieldseq_tb.svg index 7c74344e770f..041071e43f9b 100644 --- a/Documentation/media/uapi/v4l/fieldseq_tb.svg +++ b/Documentation/media/uapi/v4l/fieldseq_tb.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -2607,4 +2615,4 @@ y="-311.9397" x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338 538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/format.rst b/Documentation/media/uapi/v4l/format.rst index 3e3efb0e349e..9cdb296333b8 100644 --- a/Documentation/media/uapi/v4l/format.rst +++ b/Documentation/media/uapi/v4l/format.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _format: @@ -12,7 +19,7 @@ Data Format Negotiation Different devices exchange different kinds of data with applications, for example video images, raw or sliced VBI data, RDS datagrams. Even -within one kind many different formats are possible, in particular an +within one kind many different formats are possible, in particular there is an abundance of image formats. Although drivers must provide a default and the selection persists across closing and reopening a device, applications should always negotiate a data format before engaging in diff --git a/Documentation/media/uapi/v4l/func-close.rst b/Documentation/media/uapi/v4l/func-close.rst index e85a6744eb91..1a56811b827e 100644 --- a/Documentation/media/uapi/v4l/func-close.rst +++ b/Documentation/media/uapi/v4l/func-close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-close: diff --git a/Documentation/media/uapi/v4l/func-ioctl.rst b/Documentation/media/uapi/v4l/func-ioctl.rst index ebfbe92f0478..e7a8cf62752e 100644 --- a/Documentation/media/uapi/v4l/func-ioctl.rst +++ b/Documentation/media/uapi/v4l/func-ioctl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-ioctl: diff --git a/Documentation/media/uapi/v4l/func-mmap.rst b/Documentation/media/uapi/v4l/func-mmap.rst index 6d2ce539bd72..75985d80788a 100644 --- a/Documentation/media/uapi/v4l/func-mmap.rst +++ b/Documentation/media/uapi/v4l/func-mmap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-mmap: diff --git a/Documentation/media/uapi/v4l/func-munmap.rst b/Documentation/media/uapi/v4l/func-munmap.rst index c2f4043d7d2b..0d472d86a036 100644 --- a/Documentation/media/uapi/v4l/func-munmap.rst +++ b/Documentation/media/uapi/v4l/func-munmap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-munmap: diff --git a/Documentation/media/uapi/v4l/func-open.rst b/Documentation/media/uapi/v4l/func-open.rst index deea34cc778b..a3d149ce6635 100644 --- a/Documentation/media/uapi/v4l/func-open.rst +++ b/Documentation/media/uapi/v4l/func-open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-open: diff --git a/Documentation/media/uapi/v4l/func-poll.rst b/Documentation/media/uapi/v4l/func-poll.rst index 967fe8920729..4c579ed31358 100644 --- a/Documentation/media/uapi/v4l/func-poll.rst +++ b/Documentation/media/uapi/v4l/func-poll.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-poll: diff --git a/Documentation/media/uapi/v4l/func-read.rst b/Documentation/media/uapi/v4l/func-read.rst index ae38c2d59d49..14aca4d5e8fd 100644 --- a/Documentation/media/uapi/v4l/func-read.rst +++ b/Documentation/media/uapi/v4l/func-read.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-read: diff --git a/Documentation/media/uapi/v4l/func-select.rst b/Documentation/media/uapi/v4l/func-select.rst index 002dedba2666..af5f1e31c0fb 100644 --- a/Documentation/media/uapi/v4l/func-select.rst +++ b/Documentation/media/uapi/v4l/func-select.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-select: diff --git a/Documentation/media/uapi/v4l/func-write.rst b/Documentation/media/uapi/v4l/func-write.rst index 938f33f85455..865129c726ad 100644 --- a/Documentation/media/uapi/v4l/func-write.rst +++ b/Documentation/media/uapi/v4l/func-write.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-write: diff --git a/Documentation/media/uapi/v4l/hist-v4l2.rst b/Documentation/media/uapi/v4l/hist-v4l2.rst index 058b5db95c32..7d8e9efbeb1e 100644 --- a/Documentation/media/uapi/v4l/hist-v4l2.rst +++ b/Documentation/media/uapi/v4l/hist-v4l2.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _hist-v4l2: diff --git a/Documentation/media/uapi/v4l/hsv-formats.rst b/Documentation/media/uapi/v4l/hsv-formats.rst index f0f2615eaa95..f52f8ba131f0 100644 --- a/Documentation/media/uapi/v4l/hsv-formats.rst +++ b/Documentation/media/uapi/v4l/hsv-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _hsv-formats: diff --git a/Documentation/media/uapi/v4l/io.rst b/Documentation/media/uapi/v4l/io.rst index 94b38a10ee65..049a2530d3a2 100644 --- a/Documentation/media/uapi/v4l/io.rst +++ b/Documentation/media/uapi/v4l/io.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _io: diff --git a/Documentation/media/uapi/v4l/libv4l-introduction.rst b/Documentation/media/uapi/v4l/libv4l-introduction.rst index ccc3c4d2fc0f..1b206d380d4b 100644 --- a/Documentation/media/uapi/v4l/libv4l-introduction.rst +++ b/Documentation/media/uapi/v4l/libv4l-introduction.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _libv4l-introduction: diff --git a/Documentation/media/uapi/v4l/libv4l.rst b/Documentation/media/uapi/v4l/libv4l.rst index 332c1d42688b..d114fbf1ffa6 100644 --- a/Documentation/media/uapi/v4l/libv4l.rst +++ b/Documentation/media/uapi/v4l/libv4l.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _libv4l: diff --git a/Documentation/media/uapi/v4l/meta-formats.rst b/Documentation/media/uapi/v4l/meta-formats.rst index cf971d5ad9ea..5f956fa784b7 100644 --- a/Documentation/media/uapi/v4l/meta-formats.rst +++ b/Documentation/media/uapi/v4l/meta-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _meta-formats: @@ -12,6 +19,7 @@ These formats are used for the :ref:`metadata` interface only. .. toctree:: :maxdepth: 1 + pixfmt-meta-intel-ipu3 pixfmt-meta-d4xx pixfmt-meta-uvc pixfmt-meta-vsp1-hgo diff --git a/Documentation/media/uapi/v4l/mmap.rst b/Documentation/media/uapi/v4l/mmap.rst index 670596c1a4f7..c47708bf2c87 100644 --- a/Documentation/media/uapi/v4l/mmap.rst +++ b/Documentation/media/uapi/v4l/mmap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _mmap: @@ -231,17 +238,17 @@ up the output is started with :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`. In the write loop, when the application runs out of free buffers, it must wait until an empty buffer can be dequeued and reused. -To enqueue and dequeue a buffer applications use the :ref:`VIDIOC_QBUF` -and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The status of a buffer -being mapped, enqueued, full or empty can be determined at any time -using the :ref:`VIDIOC_QUERYBUF` ioctl. Two methods exist to suspend -execution of the application until one or more buffers can be dequeued. -By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` blocks when no buffer is -in the outgoing queue. When the ``O_NONBLOCK`` flag was given to the -:ref:`open() <func-open>` function, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` -returns immediately with an ``EAGAIN`` error code when no buffer is -available. The :ref:`select() <func-select>` or :ref:`poll() -<func-poll>` functions are always available. +To enqueue and dequeue a buffer applications use the +:ref:`VIVIOC_QBUF <VIDIOC_QBUF>` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` +ioctl. The status of a buffer being mapped, enqueued, full or empty can +be determined at any time using the :ref:`VIDIOC_QUERYBUF` ioctl. Two +methods exist to suspend execution of the application until one or more +buffers can be dequeued. By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` +blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK`` +flag was given to the :ref:`open() <func-open>` function, +:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN`` +error code when no buffer is available. The :ref:`select() <func-select>` +or :ref:`poll() <func-poll>` functions are always available. To start and stop capturing or output applications call the :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF diff --git a/Documentation/media/uapi/v4l/nv12mt.svg b/Documentation/media/uapi/v4l/nv12mt.svg index 65d05606c04c..067d8fb34ba2 100644 --- a/Documentation/media/uapi/v4l/nv12mt.svg +++ b/Documentation/media/uapi/v4l/nv12mt.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/nv12mt_example.svg b/Documentation/media/uapi/v4l/nv12mt_example.svg index fc51fe8fda8b..70c3200fdb32 100644 --- a/Documentation/media/uapi/v4l/nv12mt_example.svg +++ b/Documentation/media/uapi/v4l/nv12mt_example.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/open.rst b/Documentation/media/uapi/v4l/open.rst index afd116edb40d..42fad5001c5c 100644 --- a/Documentation/media/uapi/v4l/open.rst +++ b/Documentation/media/uapi/v4l/open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _open: @@ -53,7 +60,7 @@ ranges. These ranges are listed in :ref:`devices`. The creation of character special files (with mknod) is a privileged operation and devices cannot be opened by major and minor number. That -means applications cannot *reliable* scan for loaded or installed +means applications cannot *reliably* scan for loaded or installed drivers. The user must enter a device name, or the application can try the conventional device names. diff --git a/Documentation/media/uapi/v4l/pipeline.dot b/Documentation/media/uapi/v4l/pipeline.dot index 02d7fcf12b26..8c53ce719a14 100644 --- a/Documentation/media/uapi/v4l/pipeline.dot +++ b/Documentation/media/uapi/v4l/pipeline.dot @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + digraph board { rankdir=TB colorscheme=x11 diff --git a/Documentation/media/uapi/v4l/pixfmt-cnf4.rst b/Documentation/media/uapi/v4l/pixfmt-cnf4.rst new file mode 100644 index 000000000000..8f469290c304 --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-cnf4.rst @@ -0,0 +1,31 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _V4L2-PIX-FMT-CNF4: + +****************************** +V4L2_PIX_FMT_CNF4 ('CNF4') +****************************** + +Depth sensor confidence information as a 4 bits per pixel packed array + +Description +=========== + +Proprietary format used by Intel RealSense Depth cameras containing depth +confidence information in range 0-15 with 0 indicating that the sensor was +unable to resolve any signal and 15 indicating maximum level of confidence for +the specific sensor (actual error margins might change from sensor to sensor). + +Every two consecutive pixels are packed into a single byte. +Bits 0-3 of byte n refer to confidence value of depth pixel 2*n, +bits 4-7 to confidence value of depth pixel 2*n+1. + +**Bit-packed representation.** + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 64 64 + + * - Y'\ :sub:`01[3:0]`\ (bits 7--4) Y'\ :sub:`00[3:0]`\ (bits 3--0) + - Y'\ :sub:`03[3:0]`\ (bits 7--4) Y'\ :sub:`02[3:0]`\ (bits 3--0) diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst index ba0f6c49d9bf..e4c5e456df59 100644 --- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst +++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************** Compressed Formats diff --git a/Documentation/media/uapi/v4l/pixfmt-grey.rst b/Documentation/media/uapi/v4l/pixfmt-grey.rst index dad813819d3e..3a8156164d39 100644 --- a/Documentation/media/uapi/v4l/pixfmt-grey.rst +++ b/Documentation/media/uapi/v4l/pixfmt-grey.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-GREY: diff --git a/Documentation/media/uapi/v4l/pixfmt-indexed.rst b/Documentation/media/uapi/v4l/pixfmt-indexed.rst index 6edac54dad74..4538b425a046 100644 --- a/Documentation/media/uapi/v4l/pixfmt-indexed.rst +++ b/Documentation/media/uapi/v4l/pixfmt-indexed.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt-indexed: diff --git a/Documentation/media/uapi/v4l/pixfmt-intro.rst b/Documentation/media/uapi/v4l/pixfmt-intro.rst index 4bc116aa8193..ca0a6e0d8959 100644 --- a/Documentation/media/uapi/v4l/pixfmt-intro.rst +++ b/Documentation/media/uapi/v4l/pixfmt-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ********************** Standard Image Formats diff --git a/Documentation/media/uapi/v4l/pixfmt-inzi.rst b/Documentation/media/uapi/v4l/pixfmt-inzi.rst index 75272f80bc8a..af2940d844ff 100644 --- a/Documentation/media/uapi/v4l/pixfmt-inzi.rst +++ b/Documentation/media/uapi/v4l/pixfmt-inzi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-INZI: diff --git a/Documentation/media/uapi/v4l/pixfmt-m420.rst b/Documentation/media/uapi/v4l/pixfmt-m420.rst index 6703f4079c3e..c2bae959bf51 100644 --- a/Documentation/media/uapi/v4l/pixfmt-m420.rst +++ b/Documentation/media/uapi/v4l/pixfmt-m420.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-M420: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst index 63bf1a2c9116..862e1f327150 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-d4xx: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst new file mode 100644 index 000000000000..dc871006b41a --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst @@ -0,0 +1,178 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _v4l2-meta-fmt-params: +.. _v4l2-meta-fmt-stat-3a: + +****************************************************************** +V4L2_META_FMT_IPU3_PARAMS ('ip3p'), V4L2_META_FMT_IPU3_3A ('ip3s') +****************************************************************** + +.. c:type:: ipu3_uapi_stats_3a + +3A statistics +============= + +For IPU3 ImgU, the 3A statistics accelerators collect different statistics over +an input bayer frame. Those statistics, defined in data struct :c:type:`ipu3_uapi_stats_3a`, +are obtained from "ipu3-imgu 3a stat" metadata capture video node, which are then +passed to user space for statistics analysis using :c:type:`v4l2_meta_format` interface. + +The statistics collected are AWB (Auto-white balance) RGBS (Red, Green, Blue and +Saturation measure) cells, AWB filter response, AF (Auto-focus) filter response, +and AE (Auto-exposure) histogram. + +struct :c:type:`ipu3_uapi_4a_config` saves configurable parameters for all above. + +.. code-block:: c + + struct ipu3_uapi_stats_3a { + struct ipu3_uapi_awb_raw_buffer awb_raw_buffer; + struct ipu3_uapi_ae_raw_buffer_aligned ae_raw_buffer[IPU3_UAPI_MAX_STRIPES]; + struct ipu3_uapi_af_raw_buffer af_raw_buffer; + struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer; + struct ipu3_uapi_4a_config stats_4a_config; + __u32 ae_join_buffers; + __u8 padding[28]; + struct ipu3_uapi_stats_3a_bubble_info_per_stripe stats_3a_bubble_per_stripe; + struct ipu3_uapi_ff_status stats_3a_status; + }; + +.. c:type:: ipu3_uapi_params + +Pipeline parameters +=================== + +IPU3 pipeline has a number of image processing stages, each of which takes a +set of parameters as input. The major stages of pipelines are shown here: + +Raw pixels -> Bayer Downscaling -> Optical Black Correction -> + +Linearization -> Lens Shading Correction -> White Balance / Exposure / + +Focus Apply -> Bayer Noise Reduction -> ANR -> Demosaicing -> Color + +Correction Matrix -> Gamma correction -> Color Space Conversion -> + +Chroma Down Scaling -> Chromatic Noise Reduction -> Total Color + +Correction -> XNR3 -> TNR -> DDR + +The table below presents a description of the above algorithms. + +======================== ======================================================= +Name Description +======================== ======================================================= +Optical Black Correction Optical Black Correction block subtracts a pre-defined + value from the respective pixel values to obtain better + image quality. + Defined in :c:type:`ipu3_uapi_obgrid_param`. +Linearization This algo block uses linearization parameters to + address non-linearity sensor effects. The Lookup table + table is defined in + :c:type:`ipu3_uapi_isp_lin_vmem_params`. +SHD Lens shading correction is used to correct spatial + non-uniformity of the pixel response due to optical + lens shading. This is done by applying a different gain + for each pixel. The gain, black level etc are + configured in :c:type:`ipu3_uapi_shd_config_static`. +BNR Bayer noise reduction block removes image noise by + applying a bilateral filter. + See :c:type:`ipu3_uapi_bnr_static_config` for details. +ANR Advanced Noise Reduction is a block based algorithm + that performs noise reduction in the Bayer domain. The + convolution matrix etc can be found in + :c:type:`ipu3_uapi_anr_config`. +Demosaicing Demosaicing converts raw sensor data in Bayer format + into RGB (Red, Green, Blue) presentation. Then add + outputs of estimation of Y channel for following stream + processing by Firmware. The struct is defined as + :c:type:`ipu3_uapi_dm_config`. (TODO) +Color Correction Color Correction algo transforms sensor specific color + space to the standard "sRGB" color space. This is done + by applying 3x3 matrix defined in + :c:type:`ipu3_uapi_ccm_mat_config`. +Gamma correction Gamma correction :c:type:`ipu3_uapi_gamma_config` is a + basic non-linear tone mapping correction that is + applied per pixel for each pixel component. +CSC Color space conversion transforms each pixel from the + RGB primary presentation to YUV (Y: brightness, + UV: Luminance) presentation. This is done by applying + a 3x3 matrix defined in + :c:type:`ipu3_uapi_csc_mat_config` +CDS Chroma down sampling + After the CSC is performed, the Chroma Down Sampling + is applied for a UV plane down sampling by a factor + of 2 in each direction for YUV 4:2:0 using a 4x2 + configurable filter :c:type:`ipu3_uapi_cds_params`. +CHNR Chroma noise reduction + This block processes only the chrominance pixels and + performs noise reduction by cleaning the high + frequency noise. + See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`. +TCC Total color correction as defined in struct + :c:type:`ipu3_uapi_yuvp2_tcc_static_config`. +XNR3 eXtreme Noise Reduction V3 is the third revision of + noise reduction algorithm used to improve image + quality. This removes the low frequency noise in the + captured image. Two related structs are being defined, + :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data memory + and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for vector + memory. +TNR Temporal Noise Reduction block compares successive + frames in time to remove anomalies / noise in pixel + values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params` and + :c:type:`ipu3_uapi_isp_tnr3_params` are defined for ISP + vector and data memory respectively. +======================== ======================================================= + +A few stages of the pipeline will be executed by firmware running on the ISP +processor, while many others will use a set of fixed hardware blocks also +called accelerator cluster (ACC) to crunch pixel data and produce statistics. + +ACC parameters of individual algorithms, as defined by +:c:type:`ipu3_uapi_acc_param`, can be chosen to be applied by the user +space through struct :c:type:`ipu3_uapi_flags` embedded in +:c:type:`ipu3_uapi_params` structure. For parameters that are configured as +not enabled by the user space, the corresponding structs are ignored by the +driver, in which case the existing configuration of the algorithm will be +preserved. + +Both 3A statistics and pipeline parameters described here are closely tied to +the underlying camera sub-system (CSS) APIs. They are usually consumed and +produced by dedicated user space libraries that comprise the important tuning +tools, thus freeing the developers from being bothered with the low level +hardware and algorithm details. + +It should be noted that IPU3 DMA operations require the addresses of all data +structures (that includes both input and output) to be aligned on 32 byte +boundaries. + +The meta data :c:type:`ipu3_uapi_params` will be sent to "ipu3-imgu parameters" +video node in ``V4L2_BUF_TYPE_META_CAPTURE`` format. + +.. code-block:: c + + struct ipu3_uapi_params { + /* Flags which of the settings below are to be applied */ + struct ipu3_uapi_flags use; + + /* Accelerator cluster parameters */ + struct ipu3_uapi_acc_param acc_param; + + /* ISP vector address space parameters */ + struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params; + struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params; + struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params; + + /* ISP data memory (DMEM) parameters */ + struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params; + struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params; + + /* Optical black level compensation */ + struct ipu3_uapi_obgrid_param obgrid_param; + }; + +Intel IPU3 ImgU uAPI data types +=============================== + +.. kernel-doc:: drivers/staging/media/ipu3/include/intel-ipu3.h diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst b/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst index b5165dc090c2..481e4e0e6e1d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-uvc: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst index 67796594fd48..f7a861696281 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-vsp1-hgo: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst index fb9f79466319..2ebccdcca95d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-vsp1-hgt: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12.rst b/Documentation/media/uapi/v4l/pixfmt-nv12.rst index 2776b41377d5..b8c021b07fd2 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV12: .. _V4L2-PIX-FMT-NV21: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst b/Documentation/media/uapi/v4l/pixfmt-nv12m.rst index c1a2779f604c..9b2c5c21280a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV12M: .. _v4l2-pix-fmt-nv12mt-16x16: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst b/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst index 172a3825604e..2092725de33c 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV12MT: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16.rst b/Documentation/media/uapi/v4l/pixfmt-nv16.rst index f0fdad3006cf..5ec4b7fa8f04 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV16: .. _V4L2-PIX-FMT-NV61: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst b/Documentation/media/uapi/v4l/pixfmt-nv16m.rst index c45f036763e7..4a63bcf18b70 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv16m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV16M: .. _v4l2-pix-fmt-nv61m: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv24.rst b/Documentation/media/uapi/v4l/pixfmt-nv24.rst index bda973e86227..13fc6fe1a3d6 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv24.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv24.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV24: .. _V4L2-PIX-FMT-NV42: diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst index 8edf65c80660..38b1895a509f 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _packed-hsv: diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst index 4938d9655a41..6b3781c04dd5 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _packed-rgb: diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst index d7644b411ccc..f53e8f57a003 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _packed-yuv: diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst index 0c399858bda2..b2cd155e691b 100644 --- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst +++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt-reserved: diff --git a/Documentation/media/uapi/v4l/pixfmt-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-rgb.rst index 1f9a7e3a07c9..48ab80024835 100644 --- a/Documentation/media/uapi/v4l/pixfmt-rgb.rst +++ b/Documentation/media/uapi/v4l/pixfmt-rgb.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt-rgb: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst index 179894f6f8fb..e7a89fe7e117 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-sdr-fmt-cs8: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst index 5cf7d387447c..d10d56f0e63a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-CS14LE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst index fd915b7629b7..f37df90f5a21 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-sdr-fmt-cu8: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst index 8922f5b35457..237998fb5f9f 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-CU16LE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst index 2de1b1a0f517..df078dcfd18d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-PCU16BE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst index da8b26bf6b95..a1ea63db9230 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-PCU18BE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst index 5499eed39477..11a05ea60e26 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst @@ -1,4 +1,12 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _V4L2-SDR-FMT-PCU20BE: ****************************** diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst index 5e383382802f..3c2c9f75fc5e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-RU12LE: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst index 99cde5077519..75279f0fdad8 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-pix-fmt-ipu3-sbggr10: .. _v4l2-pix-fmt-ipu3-sgbrg10: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10.rst index af2538ce34e5..cab7fbb1f2fe 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB10: .. _v4l2-pix-fmt-sbggr10: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst index c44e093514de..5bb58764b532 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SBGGR10ALAW8: .. _v4l2-pix-fmt-sgbrg10alaw8: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst index 5e041d02eff0..cbc9c0a52ab4 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SBGGR10DPCM8: .. _v4l2-pix-fmt-sgbrg10dpcm8: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst index d9e07a4b8b31..cdb70ac26126 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB10P: .. _v4l2-pix-fmt-sbggr10p: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12.rst index 15041e568a0a..6fb6a937e6ad 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb12.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb12.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB12: .. _v4l2-pix-fmt-sbggr12: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst index 59918a7913fe..01413be12916 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB12P: .. _v4l2-pix-fmt-sbggr12p: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst index 88d20c0e4282..b583531c2853 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB14P: .. _v4l2-pix-fmt-sbggr14p: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb16.rst b/Documentation/media/uapi/v4l/pixfmt-srggb16.rst index d407b2b2050f..36527c49eaf7 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB16: .. _v4l2-pix-fmt-sbggr16: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb8.rst index 5ac25a634d30..f5233c1e2314 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB8: .. _v4l2-pix-fmt-sbggr8: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst index 07834cd1249e..b7d3d6ccebc5 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-DELTA-TD08: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst index 29ebcf40a989..4031b175257c 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-DELTA-TD16: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst index e7fb7ddd191b..2d447475aaa7 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-TU08: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst index 1588fcc3f1e7..8278543be99a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-TU16: diff --git a/Documentation/media/uapi/v4l/pixfmt-uv8.rst b/Documentation/media/uapi/v4l/pixfmt-uv8.rst index c449231b51bb..6008c898305d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-uv8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-uv8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-UV8: diff --git a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst b/Documentation/media/uapi/v4l/pixfmt-uyvy.rst index ecdc2d94c209..72da2639d37e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst +++ b/Documentation/media/uapi/v4l/pixfmt-uyvy.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-UYVY: diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst index ef52f637d8e9..7f82dad9013a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst +++ b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************************** Multi-planar format structures diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst index 826f2305da01..71eebfc6d853 100644 --- a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst +++ b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************************** Single-planar format structure diff --git a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst b/Documentation/media/uapi/v4l/pixfmt-vyuy.rst index 670c339c1714..39b99707cd99 100644 --- a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst +++ b/Documentation/media/uapi/v4l/pixfmt-vyuy.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-VYUY: diff --git a/Documentation/media/uapi/v4l/pixfmt-y10.rst b/Documentation/media/uapi/v4l/pixfmt-y10.rst index 89e22899cd81..63277686764a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y10.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y10.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y10: diff --git a/Documentation/media/uapi/v4l/pixfmt-y10b.rst b/Documentation/media/uapi/v4l/pixfmt-y10b.rst index 9feddf3ae07b..49c4dd432413 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y10b.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y10b.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y10BPACK: diff --git a/Documentation/media/uapi/v4l/pixfmt-y10p.rst b/Documentation/media/uapi/v4l/pixfmt-y10p.rst index 13b571306915..7893642faee3 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y10p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y10p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y10P: diff --git a/Documentation/media/uapi/v4l/pixfmt-y12.rst b/Documentation/media/uapi/v4l/pixfmt-y12.rst index 0f230713290b..33a943b4996a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y12.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y12.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y12: diff --git a/Documentation/media/uapi/v4l/pixfmt-y12i.rst b/Documentation/media/uapi/v4l/pixfmt-y12i.rst index bb39a2463564..1d4a14e1ec6e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y12i.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y12i.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y12I: diff --git a/Documentation/media/uapi/v4l/pixfmt-y16-be.rst b/Documentation/media/uapi/v4l/pixfmt-y16-be.rst index 54ce35ef84b7..1e72bfe2d557 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y16-be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y16-be.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y16-BE: diff --git a/Documentation/media/uapi/v4l/pixfmt-y16.rst b/Documentation/media/uapi/v4l/pixfmt-y16.rst index bcbd52de3aca..f77d900db131 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y16: diff --git a/Documentation/media/uapi/v4l/pixfmt-y41p.rst b/Documentation/media/uapi/v4l/pixfmt-y41p.rst index e1fe548807a4..829c68afd8d7 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y41p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y41p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y41P: diff --git a/Documentation/media/uapi/v4l/pixfmt-y8i.rst b/Documentation/media/uapi/v4l/pixfmt-y8i.rst index fd8ed23dd342..2c88ed90522d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y8i.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y8i.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y8I: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst b/Documentation/media/uapi/v4l/pixfmt-yuv410.rst index b51a0d1c6108..ebb72a5c7ceb 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv410.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YVU410: .. _v4l2-pix-fmt-yuv410: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst index 2582341972db..83ddaa3f8dfb 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV411P: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420.rst index a9b85c4b1dbc..f4f6f792a23e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv420.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YVU420: .. _V4L2-PIX-FMT-YUV420: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst index 32c68c33f2b1..c29b30c6445a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV420M: .. _v4l2-pix-fmt-yvu420m: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst index 9e7028c4967c..737fd94a9ae9 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV422M: .. _v4l2-pix-fmt-yvu422m: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst index a96f836c7fa5..7cebb6ebb621 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV422P: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst index 8605bfaee112..8f14ca378816 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV444M: .. _v4l2-pix-fmt-yvu444m: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst b/Documentation/media/uapi/v4l/pixfmt-yuyv.rst index 53e876d053fb..d86d7f086c41 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuyv.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUYV: diff --git a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst b/Documentation/media/uapi/v4l/pixfmt-yvyu.rst index b9c31746e565..656a830fed02 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yvyu.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YVYU: diff --git a/Documentation/media/uapi/v4l/pixfmt-z16.rst b/Documentation/media/uapi/v4l/pixfmt-z16.rst index eb713a9bccae..eccf235bf02d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-z16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-z16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Z16: diff --git a/Documentation/media/uapi/v4l/pixfmt.rst b/Documentation/media/uapi/v4l/pixfmt.rst index 2aa449e2da67..29be001796db 100644 --- a/Documentation/media/uapi/v4l/pixfmt.rst +++ b/Documentation/media/uapi/v4l/pixfmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt: diff --git a/Documentation/media/uapi/v4l/planar-apis.rst b/Documentation/media/uapi/v4l/planar-apis.rst index 4e059fb44153..a422dc9d592c 100644 --- a/Documentation/media/uapi/v4l/planar-apis.rst +++ b/Documentation/media/uapi/v4l/planar-apis.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _planar-apis: diff --git a/Documentation/media/uapi/v4l/querycap.rst b/Documentation/media/uapi/v4l/querycap.rst index c19cce7a816f..8d01ef52f780 100644 --- a/Documentation/media/uapi/v4l/querycap.rst +++ b/Documentation/media/uapi/v4l/querycap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _querycap: diff --git a/Documentation/media/uapi/v4l/rw.rst b/Documentation/media/uapi/v4l/rw.rst index 91596c0cc2f3..6e498fcf32c4 100644 --- a/Documentation/media/uapi/v4l/rw.rst +++ b/Documentation/media/uapi/v4l/rw.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _rw: diff --git a/Documentation/media/uapi/v4l/sdr-formats.rst b/Documentation/media/uapi/v4l/sdr-formats.rst index 2037f5bad727..f452f5574ebb 100644 --- a/Documentation/media/uapi/v4l/sdr-formats.rst +++ b/Documentation/media/uapi/v4l/sdr-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _sdr-formats: diff --git a/Documentation/media/uapi/v4l/selection-api-configuration.rst b/Documentation/media/uapi/v4l/selection-api-configuration.rst index 0a4ddc2d71db..6e0c98c37067 100644 --- a/Documentation/media/uapi/v4l/selection-api-configuration.rst +++ b/Documentation/media/uapi/v4l/selection-api-configuration.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ************* Configuration diff --git a/Documentation/media/uapi/v4l/selection-api-examples.rst b/Documentation/media/uapi/v4l/selection-api-examples.rst index 67e0e9aed9e8..bb288b06cc17 100644 --- a/Documentation/media/uapi/v4l/selection-api-examples.rst +++ b/Documentation/media/uapi/v4l/selection-api-examples.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ******** Examples diff --git a/Documentation/media/uapi/v4l/selection-api-intro.rst b/Documentation/media/uapi/v4l/selection-api-intro.rst index 09ca93f91bf7..0faed02d0226 100644 --- a/Documentation/media/uapi/v4l/selection-api-intro.rst +++ b/Documentation/media/uapi/v4l/selection-api-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ************ Introduction diff --git a/Documentation/media/uapi/v4l/selection-api-targets.rst b/Documentation/media/uapi/v4l/selection-api-targets.rst index bf7e76dfbdf9..83d633bcbd6f 100644 --- a/Documentation/media/uapi/v4l/selection-api-targets.rst +++ b/Documentation/media/uapi/v4l/selection-api-targets.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ***************** Selection targets diff --git a/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst b/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst index e7455fb1e572..79b3abca341a 100644 --- a/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst +++ b/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _selection-vs-crop: diff --git a/Documentation/media/uapi/v4l/selection-api.rst b/Documentation/media/uapi/v4l/selection-api.rst index 390233f704a3..5386004e87cf 100644 --- a/Documentation/media/uapi/v4l/selection-api.rst +++ b/Documentation/media/uapi/v4l/selection-api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _selection-api: diff --git a/Documentation/media/uapi/v4l/selection.svg b/Documentation/media/uapi/v4l/selection.svg index 911062bd2844..59d2bec9b278 100644 --- a/Documentation/media/uapi/v4l/selection.svg +++ b/Documentation/media/uapi/v4l/selection.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg enable-background="new" version="1" viewBox="0 0 4226.3 1686.8" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> <defs> <pattern id="ig" xlink:href="#ka" patternTransform="matrix(5.4432 0 0 10.1 1722.4 161.06)"/> diff --git a/Documentation/media/uapi/v4l/selections-common.rst b/Documentation/media/uapi/v4l/selections-common.rst index 69dbce4e6e47..28b32db280f2 100644 --- a/Documentation/media/uapi/v4l/selections-common.rst +++ b/Documentation/media/uapi/v4l/selections-common.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-selections-common: diff --git a/Documentation/media/uapi/v4l/standard.rst b/Documentation/media/uapi/v4l/standard.rst index 75a14895aed7..bf8959b72988 100644 --- a/Documentation/media/uapi/v4l/standard.rst +++ b/Documentation/media/uapi/v4l/standard.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _standard: diff --git a/Documentation/media/uapi/v4l/streaming-par.rst b/Documentation/media/uapi/v4l/streaming-par.rst index f9b93c53f75c..425bd0ff1477 100644 --- a/Documentation/media/uapi/v4l/streaming-par.rst +++ b/Documentation/media/uapi/v4l/streaming-par.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _streaming-par: diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst index 8e73fcfc6900..ff4b2a972fd2 100644 --- a/Documentation/media/uapi/v4l/subdev-formats.rst +++ b/Documentation/media/uapi/v4l/subdev-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-mbus-format: diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg b/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg index ee1df49f83e8..59321e09929d 100644 --- a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg +++ b/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg b/Documentation/media/uapi/v4l/subdev-image-processing-full.svg index c10d222b9ea9..e739c54fbbfb 100644 --- a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg +++ b/Documentation/media/uapi/v4l/subdev-image-processing-full.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg index 3cb68bf9fc04..401d1456958c 100644 --- a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg +++ b/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/tch-formats.rst b/Documentation/media/uapi/v4l/tch-formats.rst index dbaabf33a5b8..429c1010149d 100644 --- a/Documentation/media/uapi/v4l/tch-formats.rst +++ b/Documentation/media/uapi/v4l/tch-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _tch-formats: diff --git a/Documentation/media/uapi/v4l/tuner.rst b/Documentation/media/uapi/v4l/tuner.rst index ad117b068831..601dc535199c 100644 --- a/Documentation/media/uapi/v4l/tuner.rst +++ b/Documentation/media/uapi/v4l/tuner.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _tuner: @@ -31,7 +38,7 @@ current video or radio input is queried. .. note:: :ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` does not switch the - current tuner, when there is more than one at all. The tuner is solely + current tuner, when there is more than one. The tuner is solely determined by the current video input. Drivers must support both ioctls and set the ``V4L2_CAP_TUNER`` flag in the struct :c:type:`v4l2_capability` returned by the :ref:`VIDIOC_QUERYCAP` ioctl when the @@ -41,7 +48,7 @@ current video or radio input is queried. Modulators ========== -Video output devices can have one or more modulators, uh, modulating a +Video output devices can have one or more modulators, that modulate a video signal for radiation or connection to the antenna input of a TV set or video recorder. Each modulator is associated with one or more video outputs, depending on the number of RF connectors on the diff --git a/Documentation/media/uapi/v4l/user-func.rst b/Documentation/media/uapi/v4l/user-func.rst index 3e0413b83a33..ca0ef21d77fe 100644 --- a/Documentation/media/uapi/v4l/user-func.rst +++ b/Documentation/media/uapi/v4l/user-func.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _user-func: diff --git a/Documentation/media/uapi/v4l/userp.rst b/Documentation/media/uapi/v4l/userp.rst index dc2893a60d65..b19da8655452 100644 --- a/Documentation/media/uapi/v4l/userp.rst +++ b/Documentation/media/uapi/v4l/userp.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _userp: @@ -62,9 +69,9 @@ memory pages at any time between the completion of the DMA and this ioctl. The memory is also unlocked when :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called, :ref:`VIDIOC_REQBUFS`, or when the device is closed. -Applications must take care not to free buffers without dequeuing. For -once, the buffers remain locked until further, wasting physical memory. -Second the driver will not be notified when the memory is returned to +Applications must take care not to free buffers without dequeuing. +Firstly, the buffers remain locked for longer, wasting physical memory. +Secondly the driver will not be notified when the memory is returned to the application's free list and subsequently reused for other purposes, possibly completing the requested DMA and overwriting valuable data. @@ -90,7 +97,7 @@ To start and stop capturing or output applications call the .. note:: - ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from + :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from both queues and unlocks all buffers as a side effect. Since there is no notion of doing anything "now" on a multitasking system, if an application needs to synchronize with another event it should examine diff --git a/Documentation/media/uapi/v4l/v4l2-selection-flags.rst b/Documentation/media/uapi/v4l/v4l2-selection-flags.rst index 1f9a03851d0f..cc8f2a2b7cba 100644 --- a/Documentation/media/uapi/v4l/v4l2-selection-flags.rst +++ b/Documentation/media/uapi/v4l/v4l2-selection-flags.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-selection-flags: diff --git a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst b/Documentation/media/uapi/v4l/v4l2-selection-targets.rst index 87433ec76c6b..f74f239b0510 100644 --- a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst +++ b/Documentation/media/uapi/v4l/v4l2-selection-targets.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-selection-targets: @@ -42,12 +49,7 @@ of the two interfaces they are used. * - ``V4L2_SEL_TGT_NATIVE_SIZE`` - 0x0003 - The native size of the device, e.g. a sensor's pixel array. - ``left`` and ``top`` fields are zero for this target. Setting the - native size will generally only make sense for memory to memory - devices where the software can create a canvas of a given size in - which for example a video frame can be composed. In that case - V4L2_SEL_TGT_NATIVE_SIZE can be used to configure the size of - that canvas. + ``left`` and ``top`` fields are zero for this target. - Yes - Yes * - ``V4L2_SEL_TGT_COMPOSE`` diff --git a/Documentation/media/uapi/v4l/v4l2.rst b/Documentation/media/uapi/v4l/v4l2.rst index b89e5621ae69..004ec00db6bd 100644 --- a/Documentation/media/uapi/v4l/v4l2.rst +++ b/Documentation/media/uapi/v4l/v4l2.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> .. _v4l2spec: diff --git a/Documentation/media/uapi/v4l/v4l2grab-example.rst b/Documentation/media/uapi/v4l/v4l2grab-example.rst index c240f0513bee..2a0cfd4429c1 100644 --- a/Documentation/media/uapi/v4l/v4l2grab-example.rst +++ b/Documentation/media/uapi/v4l/v4l2grab-example.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2grab-example: diff --git a/Documentation/media/uapi/v4l/v4l2grab.c.rst b/Documentation/media/uapi/v4l/v4l2grab.c.rst index f0d0ab6abd41..e76c5fb7bd19 100644 --- a/Documentation/media/uapi/v4l/v4l2grab.c.rst +++ b/Documentation/media/uapi/v4l/v4l2grab.c.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections file: media/v4l/v4l2grab.c ========================== diff --git a/Documentation/media/uapi/v4l/vbi_525.svg b/Documentation/media/uapi/v4l/vbi_525.svg index 643aec8d0ba2..6cd5def22b1f 100644 --- a/Documentation/media/uapi/v4l/vbi_525.svg +++ b/Documentation/media/uapi/v4l/vbi_525.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -810,4 +818,4 @@ sodipodi:role="line" y="-3648.6809" x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/vbi_625.svg b/Documentation/media/uapi/v4l/vbi_625.svg index 9b18243c0a06..7aaae5ec4878 100644 --- a/Documentation/media/uapi/v4l/vbi_625.svg +++ b/Documentation/media/uapi/v4l/vbi_625.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -859,4 +867,4 @@ y="-5054.106" sodipodi:role="line" id="tspan4129">24</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/vbi_hsync.svg b/Documentation/media/uapi/v4l/vbi_hsync.svg index e17ff8314e7b..f8e979ada7e3 100644 --- a/Documentation/media/uapi/v4l/vbi_hsync.svg +++ b/Documentation/media/uapi/v4l/vbi_hsync.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -310,4 +318,4 @@ sodipodi:role="line" y="-395.66284" x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/video.rst b/Documentation/media/uapi/v4l/video.rst index d2bc06b064ad..69603b5efbb5 100644 --- a/Documentation/media/uapi/v4l/video.rst +++ b/Documentation/media/uapi/v4l/video.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video: @@ -7,7 +14,7 @@ Video Inputs and Outputs ************************ Video inputs and outputs are physical connectors of a device. These can -be for example RF connectors (antenna/cable), CVBS a.k.a. Composite +be for example: RF connectors (antenna/cable), CVBS a.k.a. Composite Video, S-Video and RGB connectors. Camera sensors are also considered to be a video input. Video and VBI capture devices have inputs. Video and VBI output devices have outputs, at least one each. Radio devices have @@ -19,7 +26,7 @@ outputs applications can enumerate them with the :ref:`VIDIOC_ENUMOUTPUT` ioctl, respectively. The struct :c:type:`v4l2_input` returned by the :ref:`VIDIOC_ENUMINPUT` ioctl also contains signal -:status information applicable when the current video input is queried. +status information applicable when the current video input is queried. The :ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and :ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` ioctls return the index of diff --git a/Documentation/media/uapi/v4l/videodev.rst b/Documentation/media/uapi/v4l/videodev.rst index b9ee4672d639..fa3d3398930a 100644 --- a/Documentation/media/uapi/v4l/videodev.rst +++ b/Documentation/media/uapi/v4l/videodev.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _videodev: diff --git a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst index eadf6f757fbf..bd08e4f77ae4 100644 --- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_CREATE_BUFS: diff --git a/Documentation/media/uapi/v4l/vidioc-cropcap.rst b/Documentation/media/uapi/v4l/vidioc-cropcap.rst index 0a7b8287fd38..019d3d3a0e0d 100644 --- a/Documentation/media/uapi/v4l/vidioc-cropcap.rst +++ b/Documentation/media/uapi/v4l/vidioc-cropcap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_CROPCAP: diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst index 7709852282c2..a1cf20181cf1 100644 --- a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst +++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DBG_G_CHIP_INFO: diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst index f4e8dd5f7889..29e1d4fc4f52 100644 --- a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst +++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DBG_G_REGISTER: diff --git a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst index 85c916b0ce07..ccf83b05afa7 100644 --- a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst +++ b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DECODER_CMD: diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst index 04416b6943c0..dea9c0cc00ab 100644 --- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst +++ b/Documentation/media/uapi/v4l/vidioc-dqevent.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DQEVENT: diff --git a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst index 63ead6b7a115..e62d45d37072 100644 --- a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst +++ b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DV_TIMINGS_CAP: diff --git a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst index 5ae8c933b1b9..c313ca8b8cb5 100644 --- a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst +++ b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENCODER_CMD: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst index 63dca65f49e4..0b286e19b46b 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_DV_TIMINGS: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst index 019c513df217..822d6730e7d2 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FMT: @@ -64,8 +71,12 @@ one until ``EINVAL`` is returned. are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT``, - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type`. + ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``, + ``V4L2_BUF_TYPE_VIDEO_OVERLAY``, + ``V4L2_BUF_TYPE_SDR_CAPTURE``, + ``V4L2_BUF_TYPE_SDR_OUTPUT`` and + ``V4L2_BUF_TYPE_META_CAPTURE``. + See :c:type:`v4l2_buf_type`. * - __u32 - ``flags`` - See :ref:`fmtdesc-flags` diff --git a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst index fea7dc3c879d..2c69f26b165d 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FRAMEINTERVALS: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst index 6de117f163e0..cf31f548826f 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FRAMESIZES: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst index 195cf45f3c32..0e97c09afe0e 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FREQ_BANDS: diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst b/Documentation/media/uapi/v4l/vidioc-enumaudio.rst index 8e5193e8696f..ee0c336c8721 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumaudio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMAUDIO: diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst b/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst index 6d2b4f6e78b0..3a8882214d62 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMAUDOUT: diff --git a/Documentation/media/uapi/v4l/vidioc-enuminput.rst b/Documentation/media/uapi/v4l/vidioc-enuminput.rst index 0350069a56c5..a0e4c4413121 100644 --- a/Documentation/media/uapi/v4l/vidioc-enuminput.rst +++ b/Documentation/media/uapi/v4l/vidioc-enuminput.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMINPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst index 697dcd186ae3..0fea81f60541 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMOUTPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst b/Documentation/media/uapi/v4l/vidioc-enumstd.rst index 2644a62acd4b..1603b1b3b6e8 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumstd.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumstd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMSTD: diff --git a/Documentation/media/uapi/v4l/vidioc-expbuf.rst b/Documentation/media/uapi/v4l/vidioc-expbuf.rst index 226e83eb28a9..4bd8cd79754c 100644 --- a/Documentation/media/uapi/v4l/vidioc-expbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-expbuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_EXPBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-g-audio.rst b/Documentation/media/uapi/v4l/vidioc-g-audio.rst index 290851f99386..7af4fe478ba4 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-audio.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-audio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_AUDIO: diff --git a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst index 1c98af33ee70..c6ea0396a96a 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_AUDOUT: diff --git a/Documentation/media/uapi/v4l/vidioc-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-g-crop.rst index b95ba6743cbd..1eff59dc5f35 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-crop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_CROP: diff --git a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst b/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst index 299b9aabbac2..8493b52adbb2 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_CTRL: diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index 35cba2c8d459..5712bd48e687 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_DV_TIMINGS: diff --git a/Documentation/media/uapi/v4l/vidioc-g-edid.rst b/Documentation/media/uapi/v4l/vidioc-g-edid.rst index acab90f06e5a..e55b349a0c7e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-edid.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-edid.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_EDID: diff --git a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst index 9dfe64fc21a4..e285a1f14cdf 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_ENC_INDEX: diff --git a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst index d9930fe776cf..13dc1a986249 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_EXT_CTRLS: diff --git a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst b/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst index fc73bf0f6052..7b6179627803 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_FBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst index 3ead350e099f..e35a9caff652 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_FMT: @@ -133,6 +140,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical - Definition of a data format, see :ref:`pixfmt`, used by SDR capture and output devices. * - + - struct :c:type:`v4l2_meta_format` + - ``meta`` + - Definition of a metadata format, see :ref:`meta-formats`, used by + metadata capture devices. + * - - __u8 - ``raw_data``\ [200] - Place holder for future extensions. diff --git a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst index c1cccb144660..cc30bae3dd6e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_FREQUENCY: diff --git a/Documentation/media/uapi/v4l/vidioc-g-input.rst b/Documentation/media/uapi/v4l/vidioc-g-input.rst index 1dcef44eef02..76b7d487466e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-input.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-input.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_INPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst index a1773ea9543e..5480277ab327 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_JPEGCOMP: diff --git a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst index a47b6a15cfbe..2c33a8bdcc47 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_MODULATOR: diff --git a/Documentation/media/uapi/v4l/vidioc-g-output.rst b/Documentation/media/uapi/v4l/vidioc-g-output.rst index 3e0093f66834..69542d78977b 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-output.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-output.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_OUTPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-g-parm.rst b/Documentation/media/uapi/v4l/vidioc-g-parm.rst index e831fa5512f0..0d2593176c90 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-parm.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-parm.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_PARM: @@ -42,6 +49,9 @@ side. This is especially useful when using the :ref:`read() <func-read>` or :ref:`write() <func-write>`, which are not augmented by timestamps or sequence counters, and to avoid unnecessary data copying. +Changing the frame interval shall never change the format. Changing the +format, on the other hand, may change the frame interval. + Further these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For implications see the section discussing the :ref:`read() <func-read>` function. diff --git a/Documentation/media/uapi/v4l/vidioc-g-priority.rst b/Documentation/media/uapi/v4l/vidioc-g-priority.rst index c28996b4a45c..244b4dbe9df3 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-priority.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-priority.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_PRIORITY: diff --git a/Documentation/media/uapi/v4l/vidioc-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-g-selection.rst index f1d9df029e0d..7d8ef7ac8e27 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-selection.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_SELECTION: diff --git a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst index a9633cae76c5..388b826d44b3 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_SLICED_VBI_CAP: diff --git a/Documentation/media/uapi/v4l/vidioc-g-std.rst b/Documentation/media/uapi/v4l/vidioc-g-std.rst index 8d94f0404df2..e633e42e3910 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-std.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-std.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_STD: diff --git a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst index acdd15901a51..82d23b8bd195 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_TUNER: diff --git a/Documentation/media/uapi/v4l/vidioc-log-status.rst b/Documentation/media/uapi/v4l/vidioc-log-status.rst index bbeb7b5f516b..16bb5509ad66 100644 --- a/Documentation/media/uapi/v4l/vidioc-log-status.rst +++ b/Documentation/media/uapi/v4l/vidioc-log-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_LOG_STATUS: diff --git a/Documentation/media/uapi/v4l/vidioc-overlay.rst b/Documentation/media/uapi/v4l/vidioc-overlay.rst index 1383e3db25fc..fc5a86e8c1f2 100644 --- a/Documentation/media/uapi/v4l/vidioc-overlay.rst +++ b/Documentation/media/uapi/v4l/vidioc-overlay.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_OVERLAY: diff --git a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst b/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst index 49f9f4c181de..60986710967b 100644 --- a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst +++ b/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_PREPARE_BUF: diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst index 753b3b5946b1..3259168a7358 100644 --- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-qbuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst index 6c82eafd28bb..e9b055395382 100644 --- a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERY_DV_TIMINGS: diff --git a/Documentation/media/uapi/v4l/vidioc-querybuf.rst b/Documentation/media/uapi/v4l/vidioc-querybuf.rst index dd54747fabc9..7da60b24e8b6 100644 --- a/Documentation/media/uapi/v4l/vidioc-querybuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-querybuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-querycap.rst b/Documentation/media/uapi/v4l/vidioc-querycap.rst index 66fb1b3d6e6e..5f9930195d62 100644 --- a/Documentation/media/uapi/v4l/vidioc-querycap.rst +++ b/Documentation/media/uapi/v4l/vidioc-querycap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYCAP: @@ -251,6 +258,9 @@ specification the ioctl returns an ``EINVAL`` error code. * - ``V4L2_CAP_STREAMING`` - 0x04000000 - The device supports the :ref:`streaming <mmap>` I/O method. + * - ``V4L2_CAP_META_OUTPUT`` + - 0x08000000 + - The device supports the :ref:`metadata` output interface. * - ``V4L2_CAP_TOUCH`` - 0x10000000 - This is a touch device. diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst index 258f5813f281..f824162d0ea9 100644 --- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst +++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYCTRL: diff --git a/Documentation/media/uapi/v4l/vidioc-querystd.rst b/Documentation/media/uapi/v4l/vidioc-querystd.rst index a8385cc74818..d8cf28274cfc 100644 --- a/Documentation/media/uapi/v4l/vidioc-querystd.rst +++ b/Documentation/media/uapi/v4l/vidioc-querystd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYSTD: diff --git a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst index d4bbbb0c60e8..d7faef10e39b 100644 --- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_REQBUFS: @@ -59,9 +66,14 @@ When the I/O method is not supported the ioctl returns an ``EINVAL`` error code. Applications can call :ref:`VIDIOC_REQBUFS` again to change the number of -buffers, however this cannot succeed when any buffers are still mapped. -A ``count`` value of zero frees all buffers, after aborting or finishing -any DMA in progress, an implicit +buffers. Note that if any buffers are still mapped or exported via DMABUF, +then :ref:`VIDIOC_REQBUFS` can only succeed if the +``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` capability is set. Otherwise +:ref:`VIDIOC_REQBUFS` will return the ``EBUSY`` error code. +If ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` is set, then these buffers are +orphaned and will be freed when they are unmapped or when the exported DMABUF +fds are closed. A ``count`` value of zero frees or orphans all buffers, after +aborting or finishing any DMA in progress, an implicit :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`. @@ -112,6 +124,7 @@ any DMA in progress, an implicit .. _V4L2-BUF-CAP-SUPPORTS-USERPTR: .. _V4L2-BUF-CAP-SUPPORTS-DMABUF: .. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: +.. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS: .. cssclass:: longtable @@ -132,6 +145,11 @@ any DMA in progress, an implicit * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` - 0x00000008 - This buffer type supports :ref:`requests <media-request-api>`. + * - ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` + - 0x00000010 + - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still + mapped or exported via DMABUF. These orphaned buffers will be freed + when they are unmapped or when the exported DMABUF fds are closed. Return Value ============ diff --git a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst index b318cb8e1df3..4daec97651f2 100644 --- a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst +++ b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_S_HW_FREQ_SEEK: diff --git a/Documentation/media/uapi/v4l/vidioc-streamon.rst b/Documentation/media/uapi/v4l/vidioc-streamon.rst index e851a6961b78..2b5528ec9f89 100644 --- a/Documentation/media/uapi/v4l/vidioc-streamon.rst +++ b/Documentation/media/uapi/v4l/vidioc-streamon.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_STREAMON: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst index 1bfe3865dcc2..6b4bf9ef5606 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst index 33fdc3ac9316..253b128b194e 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_ENUM_FRAME_SIZE: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst index 4e4291798e4b..fefe4d7349ee 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_ENUM_MBUS_CODE: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst index 69b2ae8e7c15..632ee053accc 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_CROP: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst index 81c5d331af9a..472577bd1745 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_FMT: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst index 5af0a7179941..4b1b4bc78bfe 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_FRAME_INTERVAL: @@ -63,6 +70,9 @@ doesn't match the device capabilities. They must instead modify the interval to match what the hardware can provide. The modified interval should be as close as possible to the original request. +Changing the frame interval shall never change the format. Changing the +format, on the other hand, may change the frame interval. + Sub-devices that support the frame interval ioctls should implement them on a single pad only. Their behaviour when supported on multiple pads of the same sub-device is not defined. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst index b1d3dbbef42a..fc73d27e6d74 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_SELECTION: diff --git a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst index b521efa53ceb..a2d3454555ba 100644 --- a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst +++ b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBSCRIBE_EVENT: .. _VIDIOC_UNSUBSCRIBE_EVENT: diff --git a/Documentation/media/uapi/v4l/yuv-formats.rst b/Documentation/media/uapi/v4l/yuv-formats.rst index 9ab0592d08da..867470e5f9e1 100644 --- a/Documentation/media/uapi/v4l/yuv-formats.rst +++ b/Documentation/media/uapi/v4l/yuv-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _yuv-formats: diff --git a/Documentation/media/v4l-drivers/au0828-cardlist.rst b/Documentation/media/v4l-drivers/au0828-cardlist.rst index bb87b7b36a83..aaaadc934e7a 100644 --- a/Documentation/media/v4l-drivers/au0828-cardlist.rst +++ b/Documentation/media/v4l-drivers/au0828-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + AU0828 cards list ================= diff --git a/Documentation/media/v4l-drivers/bttv-cardlist.rst b/Documentation/media/v4l-drivers/bttv-cardlist.rst index 8da27b924e01..f5806856b5a1 100644 --- a/Documentation/media/v4l-drivers/bttv-cardlist.rst +++ b/Documentation/media/v4l-drivers/bttv-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + BTTV cards list =============== diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst index 5f35e2fb5afa..d72a0f8fd267 100644 --- a/Documentation/media/v4l-drivers/bttv.rst +++ b/Documentation/media/v4l-drivers/bttv.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The bttv driver =============== diff --git a/Documentation/media/v4l-drivers/cafe_ccic.rst b/Documentation/media/v4l-drivers/cafe_ccic.rst index 94f0f58ebe37..ff7fbce1342a 100644 --- a/Documentation/media/v4l-drivers/cafe_ccic.rst +++ b/Documentation/media/v4l-drivers/cafe_ccic.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cafe_ccic driver ==================== diff --git a/Documentation/media/v4l-drivers/cardlist.rst b/Documentation/media/v4l-drivers/cardlist.rst index 8a0728d20684..14249f47fbc2 100644 --- a/Documentation/media/v4l-drivers/cardlist.rst +++ b/Documentation/media/v4l-drivers/cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Cards List ========== diff --git a/Documentation/media/v4l-drivers/cpia2.rst b/Documentation/media/v4l-drivers/cpia2.rst index b5125016cfcb..a86baa1c83f1 100644 --- a/Documentation/media/v4l-drivers/cpia2.rst +++ b/Documentation/media/v4l-drivers/cpia2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cpia2 driver ================ diff --git a/Documentation/media/v4l-drivers/cx18.rst b/Documentation/media/v4l-drivers/cx18.rst index afa03f65b01c..16895a734bae 100644 --- a/Documentation/media/v4l-drivers/cx18.rst +++ b/Documentation/media/v4l-drivers/cx18.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cx18 driver =============== diff --git a/Documentation/media/v4l-drivers/cx2341x.rst b/Documentation/media/v4l-drivers/cx2341x.rst index e06d07ebdecd..8ca37deb56b6 100644 --- a/Documentation/media/v4l-drivers/cx2341x.rst +++ b/Documentation/media/v4l-drivers/cx2341x.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cx2341x driver ================== diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst b/Documentation/media/v4l-drivers/cx23885-cardlist.rst index 8c24df8e0423..ddff8da98eeb 100644 --- a/Documentation/media/v4l-drivers/cx23885-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx23885-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + cx23885 cards list ================== diff --git a/Documentation/media/v4l-drivers/cx88-cardlist.rst b/Documentation/media/v4l-drivers/cx88-cardlist.rst index 21648b8c2e83..56ee08028106 100644 --- a/Documentation/media/v4l-drivers/cx88-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx88-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + CX88 cards list =============== diff --git a/Documentation/media/v4l-drivers/cx88.rst b/Documentation/media/v4l-drivers/cx88.rst index d8f3a014726a..698c73ea2e36 100644 --- a/Documentation/media/v4l-drivers/cx88.rst +++ b/Documentation/media/v4l-drivers/cx88.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cx88 driver =============== diff --git a/Documentation/media/v4l-drivers/davinci-vpbe.rst b/Documentation/media/v4l-drivers/davinci-vpbe.rst index b545fe001919..0fde433e5c71 100644 --- a/Documentation/media/v4l-drivers/davinci-vpbe.rst +++ b/Documentation/media/v4l-drivers/davinci-vpbe.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The VPBE V4L2 driver design =========================== diff --git a/Documentation/media/v4l-drivers/em28xx-cardlist.rst b/Documentation/media/v4l-drivers/em28xx-cardlist.rst index dfe882ca945f..2956cbdc28e0 100644 --- a/Documentation/media/v4l-drivers/em28xx-cardlist.rst +++ b/Documentation/media/v4l-drivers/em28xx-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + EM28xx cards list ================= @@ -233,7 +235,7 @@ EM28xx cards list - em2882 - eb1a:e323 * - 55 - - Terratec Cinnergy Hybrid T USB XS (em2882) + - Terratec Cinergy Hybrid T USB XS (em2882) - em2882 - 0ccd:005e, 0ccd:0042 * - 56 diff --git a/Documentation/media/v4l-drivers/fimc.rst b/Documentation/media/v4l-drivers/fimc.rst index 3adc19bcf039..74585ba48b7f 100644 --- a/Documentation/media/v4l-drivers/fimc.rst +++ b/Documentation/media/v4l-drivers/fimc.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> The Samsung S5P/EXYNOS4 FIMC driver diff --git a/Documentation/media/v4l-drivers/fourcc.rst b/Documentation/media/v4l-drivers/fourcc.rst index 9c82106e8a26..d3482c40da62 100644 --- a/Documentation/media/v4l-drivers/fourcc.rst +++ b/Documentation/media/v4l-drivers/fourcc.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Guidelines for Video4Linux pixel format 4CCs ============================================ diff --git a/Documentation/media/v4l-drivers/gspca-cardlist.rst b/Documentation/media/v4l-drivers/gspca-cardlist.rst index e18d87e80d78..adda933616f1 100644 --- a/Documentation/media/v4l-drivers/gspca-cardlist.rst +++ b/Documentation/media/v4l-drivers/gspca-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The gspca cards list ==================== diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst index 65d3d15eb159..6922dde4a82b 100644 --- a/Documentation/media/v4l-drivers/imx.rst +++ b/Documentation/media/v4l-drivers/imx.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + i.MX Video Capture Driver ========================= diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst index 679238e786a7..f28570ec9e42 100644 --- a/Documentation/media/v4l-drivers/index.rst +++ b/Documentation/media/v4l-drivers/index.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> @@ -44,6 +44,7 @@ For more details see the file COPYING in the source distribution of Linux. davinci-vpbe fimc imx + ipu3 ivtv max2175 meye diff --git a/Documentation/media/v4l-drivers/ipu3.rst b/Documentation/media/v4l-drivers/ipu3.rst new file mode 100644 index 000000000000..f89b51dafadd --- /dev/null +++ b/Documentation/media/v4l-drivers/ipu3.rst @@ -0,0 +1,369 @@ +.. include:: <isonum.txt> + +=============================================================== +Intel Image Processing Unit 3 (IPU3) Imaging Unit (ImgU) driver +=============================================================== + +Copyright |copy| 2018 Intel Corporation + +Introduction +============ + +This file documents the Intel IPU3 (3rd generation Image Processing Unit) +Imaging Unit drivers located under drivers/media/pci/intel/ipu3 (CIO2) as well +as under drivers/staging/media/ipu3 (ImgU). + +The Intel IPU3 found in certain Kaby Lake (as well as certain Sky Lake) +platforms (U/Y processor lines) is made up of two parts namely the Imaging Unit +(ImgU) and the CIO2 device (MIPI CSI2 receiver). + +The CIO2 device receives the raw Bayer data from the sensors and outputs the +frames in a format that is specific to the IPU3 (for consumption by the IPU3 +ImgU). The CIO2 driver is available as drivers/media/pci/intel/ipu3/ipu3-cio2* +and is enabled through the CONFIG_VIDEO_IPU3_CIO2 config option. + +The Imaging Unit (ImgU) is responsible for processing images captured +by the IPU3 CIO2 device. The ImgU driver sources can be found under +drivers/staging/media/ipu3 directory. The driver is enabled through the +CONFIG_VIDEO_IPU3_IMGU config option. + +The two driver modules are named ipu3_csi2 and ipu3_imgu, respectively. + +The drivers has been tested on Kaby Lake platforms (U/Y processor lines). + +Both of the drivers implement V4L2, Media Controller and V4L2 sub-device +interfaces. The IPU3 CIO2 driver supports camera sensors connected to the CIO2 +MIPI CSI-2 interfaces through V4L2 sub-device sensor drivers. + +CIO2 +==== + +The CIO2 is represented as a single V4L2 subdev, which provides a V4L2 subdev +interface to the user space. There is a video node for each CSI-2 receiver, +with a single media controller interface for the entire device. + +The CIO2 contains four independent capture channel, each with its own MIPI CSI-2 +receiver and DMA engine. Each channel is modelled as a V4L2 sub-device exposed +to userspace as a V4L2 sub-device node and has two pads: + +.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}| + +.. flat-table:: + + * - pad + - direction + - purpose + + * - 0 + - sink + - MIPI CSI-2 input, connected to the sensor subdev + + * - 1 + - source + - Raw video capture, connected to the V4L2 video interface + +The V4L2 video interfaces model the DMA engines. They are exposed to userspace +as V4L2 video device nodes. + +Capturing frames in raw Bayer format +------------------------------------ + +CIO2 MIPI CSI2 receiver is used to capture frames (in packed raw Bayer format) +from the raw sensors connected to the CSI2 ports. The captured frames are used +as input to the ImgU driver. + +Image processing using IPU3 ImgU requires tools such as raw2pnm [#f1]_, and +yavta [#f2]_ due to the following unique requirements and / or features specific +to IPU3. + +-- The IPU3 CSI2 receiver outputs the captured frames from the sensor in packed +raw Bayer format that is specific to IPU3. + +-- Multiple video nodes have to be operated simultaneously. + +Let us take the example of ov5670 sensor connected to CSI2 port 0, for a +2592x1944 image capture. + +Using the media contorller APIs, the ov5670 sensor is configured to send +frames in packed raw Bayer format to IPU3 CSI2 receiver. + +# This example assumes /dev/media0 as the CIO2 media device + +export MDEV=/dev/media0 + +# and that ov5670 sensor is connected to i2c bus 10 with address 0x36 + +export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036") + +# Establish the link for the media devices using media-ctl [#f3]_ +media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]" + +# Set the format for the media devices +media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]" + +media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]" + +media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]" + +Once the media pipeline is configured, desired sensor specific settings +(such as exposure and gain settings) can be set, using the yavta tool. + +e.g + +yavta -w 0x009e0903 444 $SDEV + +yavta -w 0x009e0913 1024 $SDEV + +yavta -w 0x009e0911 2046 $SDEV + +Once the desired sensor settings are set, frame captures can be done as below. + +e.g + +yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \ + -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0") + +With the above command, 10 frames are captured at 2592x1944 resolution, with +sGRBG10 format and output as IPU3_SGRBG10 format. + +The captured frames are available as /tmp/frame-#.bin files. + +ImgU +==== + +The ImgU is represented as two V4L2 subdevs, each of which provides a V4L2 +subdev interface to the user space. + +Each V4L2 subdev represents a pipe, which can support a maximum of 2 streams. +This helps to support advanced camera features like Continuous View Finder (CVF) +and Snapshot During Video(SDV). + +The ImgU contains two independent pipes, each modelled as a V4L2 sub-device +exposed to userspace as a V4L2 sub-device node. + +Each pipe has two sink pads and three source pads for the following purpose: + +.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}| + +.. flat-table:: + + * - pad + - direction + - purpose + + * - 0 + - sink + - Input raw video stream + + * - 1 + - sink + - Processing parameters + + * - 2 + - source + - Output processed video stream + + * - 3 + - source + - Output viewfinder video stream + + * - 4 + - source + - 3A statistics + +Each pad is connected to a corresponding V4L2 video interface, exposed to +userspace as a V4L2 video device node. + +Device operation +---------------- + +With ImgU, once the input video node ("ipu3-imgu 0/1":0, in +<entity>:<pad-number> format) is queued with buffer (in packed raw Bayer +format), ImgU starts processing the buffer and produces the video output in YUV +format and statistics output on respective output nodes. The driver is expected +to have buffers ready for all of parameter, output and statistics nodes, when +input video node is queued with buffer. + +At a minimum, all of input, main output, 3A statistics and viewfinder +video nodes should be enabled for IPU3 to start image processing. + +Each ImgU V4L2 subdev has the following set of video nodes. + +input, output and viewfinder video nodes +---------------------------------------- + +The frames (in packed raw Bayer format specific to the IPU3) received by the +input video node is processed by the IPU3 Imaging Unit and are output to 2 video +nodes, with each targeting a different purpose (main output and viewfinder +output). + +Details onand the Bayer format specific to the IPU3 can be found in +:ref:`v4l2-pix-fmt-ipu3-sbggr10`. + +The driver supports V4L2 Video Capture Interface as defined at :ref:`devices`. + +Only the multi-planar API is supported. More details can be found at +:ref:`planar-apis`. + +Parameters video node +--------------------- + +The parameters video node receives the ImgU algorithm parameters that are used +to configure how the ImgU algorithms process the image. + +Details on processing parameters specific to the IPU3 can be found in +:ref:`v4l2-meta-fmt-params`. + +3A statistics video node +------------------------ + +3A statistics video node is used by the ImgU driver to output the 3A (auto +focus, auto exposure and auto white balance) statistics for the frames that are +being processed by the ImgU to user space applications. User space applications +can use this statistics data to compute the desired algorithm parameters for +the ImgU. + +Configuring the Intel IPU3 +========================== + +The IPU3 ImgU pipelines can be configured using the Media Controller, defined at +:ref:`media_controller`. + +Firmware binary selection +------------------------- + +The firmware binary is selected using the V4L2_CID_INTEL_IPU3_MODE, currently +defined in drivers/staging/media/ipu3/include/intel-ipu3.h . "VIDEO" and "STILL" +modes are available. + +Processing the image in raw Bayer format +---------------------------------------- + +Configuring ImgU V4L2 subdev for image processing +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The ImgU V4L2 subdevs have to be configured with media controller APIs to have +all the video nodes setup correctly. + +Let us take "ipu3-imgu 0" subdev as an example. + +media-ctl -d $MDEV -r + +media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1] + +media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1] + +media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1] + +media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1] + +Also the pipe mode of the corresponding V4L2 subdev should be set as desired +(e.g 0 for video mode or 1 for still mode) through the control id 0x009819a1 as +below. + +yavta -w "0x009819A1 1" /dev/v4l-subdev7 + +RAW Bayer frames go through the following ImgU pipeline HW blocks to have the +processed image output to the DDR memory. + +RAW Bayer frame -> Input Feeder -> Bayer Down Scaling (BDS) -> Geometric +Distortion Correction (GDC) -> DDR + +The ImgU V4L2 subdev has to be configured with the supported resolutions in all +the above HW blocks, for a given input resolution. + +For a given supported resolution for an input frame, the Input Feeder, Bayer +Down Scaling and GDC blocks should be configured with the supported resolutions. +This information can be obtained by looking at the following IPU3 ImgU +configuration table. + +https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+/master + +Under baseboard-poppy/media-libs/cros-camera-hal-configs-poppy/files/gcss +directory, graph_settings_ov5670.xml can be used as an example. + +The following steps prepare the ImgU pipeline for the image processing. + +1. The ImgU V4L2 subdev data format should be set by using the +VIDIOC_SUBDEV_S_FMT on pad 0, using the GDC width and height obtained above. + +2. The ImgU V4L2 subdev cropping should be set by using the +VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_CROP as the target, +using the input feeder height and width. + +3. The ImgU V4L2 subdev composing should be set by using the +VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_COMPOSE as the target, +using the BDS height and width. + +For the ov5670 example, for an input frame with a resolution of 2592x1944 +(which is input to the ImgU subdev pad 0), the corresponding resolutions +for input feeder, BDS and GDC are 2592x1944, 2592x1944 and 2560x1920 +respectively. + +Once this is done, the received raw Bayer frames can be input to the ImgU +V4L2 subdev as below, using the open source application v4l2n [#f1]_. + +For an image captured with 2592x1944 [#f4]_ resolution, with desired output +resolution as 2560x1920 and viewfinder resolution as 2560x1920, the following +v4l2n command can be used. This helps process the raw Bayer frames and produces +the desired results for the main output image and the viewfinder output, in NV12 +format. + +v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4 +--fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069 +--reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out +--open=/dev/video5 +--fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 +--reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf +--open=/dev/video6 +--fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 +--reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7 +--output=/tmp/frames.3A --fmt=type:META_CAPTURE,? +--reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5 + +where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to +input, output, viewfinder and 3A statistics video nodes respectively. + +Converting the raw Bayer image into YUV domain +---------------------------------------------- + +The processed images after the above step, can be converted to YUV domain +as below. + +Main output frames +~~~~~~~~~~~~~~~~~~ + +raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm + +where 2560x1920 is output resolution, NV12 is the video format, followed +by input frame and output PNM file. + +Viewfinder output frames +~~~~~~~~~~~~~~~~~~~~~~~~ + +raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm + +where 2560x1920 is output resolution, NV12 is the video format, followed +by input frame and output PNM file. + +Example user space code for IPU3 +================================ + +User space code that configures and uses IPU3 is available here. + +https://chromium.googlesource.com/chromiumos/platform/arc-camera/+/master/ + +The source can be located under hal/intel directory. + +References +========== + +.. [#f5] include/uapi/linux/intel-ipu3.h + +.. [#f1] https://github.com/intel/nvt + +.. [#f2] http://git.ideasonboard.org/yavta.git + +.. [#f3] http://git.ideasonboard.org/?p=media-ctl.git;a=summary + +.. [#f4] ImgU limitation requires an additional 16x16 for all input resolutions diff --git a/Documentation/media/v4l-drivers/ivtv-cardlist.rst b/Documentation/media/v4l-drivers/ivtv-cardlist.rst index 022dca80c2c8..c34a9ebc9ac2 100644 --- a/Documentation/media/v4l-drivers/ivtv-cardlist.rst +++ b/Documentation/media/v4l-drivers/ivtv-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + IVTV cards list =============== diff --git a/Documentation/media/v4l-drivers/ivtv.rst b/Documentation/media/v4l-drivers/ivtv.rst index 3ba464c4f9bf..7b8775d20214 100644 --- a/Documentation/media/v4l-drivers/ivtv.rst +++ b/Documentation/media/v4l-drivers/ivtv.rst @@ -1,3 +1,4 @@ +.. SPDX-License-Identifier: GPL-2.0 The ivtv driver =============== diff --git a/Documentation/media/v4l-drivers/max2175.rst b/Documentation/media/v4l-drivers/max2175.rst index b1a4c89fd869..a5e35059d98d 100644 --- a/Documentation/media/v4l-drivers/max2175.rst +++ b/Documentation/media/v4l-drivers/max2175.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Maxim Integrated MAX2175 RF to bits tuner driver ================================================ diff --git a/Documentation/media/v4l-drivers/meye.rst b/Documentation/media/v4l-drivers/meye.rst index cfaba6021850..a572996cdbf6 100644 --- a/Documentation/media/v4l-drivers/meye.rst +++ b/Documentation/media/v4l-drivers/meye.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> Vaio Picturebook Motion Eye Camera Driver diff --git a/Documentation/media/v4l-drivers/omap3isp.rst b/Documentation/media/v4l-drivers/omap3isp.rst index 336e58feaee2..8974c444e3a1 100644 --- a/Documentation/media/v4l-drivers/omap3isp.rst +++ b/Documentation/media/v4l-drivers/omap3isp.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> OMAP 3 Image Signal Processor (ISP) driver diff --git a/Documentation/media/v4l-drivers/omap4_camera.rst b/Documentation/media/v4l-drivers/omap4_camera.rst index 54b427b28e5f..24db4222d36d 100644 --- a/Documentation/media/v4l-drivers/omap4_camera.rst +++ b/Documentation/media/v4l-drivers/omap4_camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + OMAP4 ISS Driver ================ diff --git a/Documentation/media/v4l-drivers/philips.rst b/Documentation/media/v4l-drivers/philips.rst index 4f68947e6a13..e2840be10d08 100644 --- a/Documentation/media/v4l-drivers/philips.rst +++ b/Documentation/media/v4l-drivers/philips.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Philips webcams (pwc driver) ============================ diff --git a/Documentation/media/v4l-drivers/pvrusb2.rst b/Documentation/media/v4l-drivers/pvrusb2.rst index dc0e72d94b1a..83bfaa531ea8 100644 --- a/Documentation/media/v4l-drivers/pvrusb2.rst +++ b/Documentation/media/v4l-drivers/pvrusb2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The pvrusb2 driver ================== diff --git a/Documentation/media/v4l-drivers/pxa_camera.rst b/Documentation/media/v4l-drivers/pxa_camera.rst index 554f91b04e70..e4fbca755e1a 100644 --- a/Documentation/media/v4l-drivers/pxa_camera.rst +++ b/Documentation/media/v4l-drivers/pxa_camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + PXA-Camera Host Driver ====================== diff --git a/Documentation/media/v4l-drivers/qcom_camss.rst b/Documentation/media/v4l-drivers/qcom_camss.rst index f27c8df20b2b..6b15385b12b3 100644 --- a/Documentation/media/v4l-drivers/qcom_camss.rst +++ b/Documentation/media/v4l-drivers/qcom_camss.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> Qualcomm Camera Subsystem driver diff --git a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot index de34f0a7afdc..7ed243b41b67 100644 --- a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot +++ b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + digraph board { rankdir=TB n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] diff --git a/Documentation/media/v4l-drivers/qcom_camss_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_graph.dot index 827fc7112c1e..ef7dca92fd0b 100644 --- a/Documentation/media/v4l-drivers/qcom_camss_graph.dot +++ b/Documentation/media/v4l-drivers/qcom_camss_graph.dot @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + digraph board { rankdir=TB n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] diff --git a/Documentation/media/v4l-drivers/radiotrack.rst b/Documentation/media/v4l-drivers/radiotrack.rst index 2f6325ebfd16..a85cb6205db8 100644 --- a/Documentation/media/v4l-drivers/radiotrack.rst +++ b/Documentation/media/v4l-drivers/radiotrack.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Radiotrack radio driver =========================== diff --git a/Documentation/media/v4l-drivers/rcar-fdp1.rst b/Documentation/media/v4l-drivers/rcar-fdp1.rst index a59b1e8e3e9c..88b0edcf9046 100644 --- a/Documentation/media/v4l-drivers/rcar-fdp1.rst +++ b/Documentation/media/v4l-drivers/rcar-fdp1.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Renesas R-Car Fine Display Processor (FDP1) Driver ================================================== diff --git a/Documentation/media/v4l-drivers/saa7134-cardlist.rst b/Documentation/media/v4l-drivers/saa7134-cardlist.rst index 6e4c35cbaabf..afb0e2fb52b0 100644 --- a/Documentation/media/v4l-drivers/saa7134-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7134-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + SAA7134 cards list ================== diff --git a/Documentation/media/v4l-drivers/saa7134.rst b/Documentation/media/v4l-drivers/saa7134.rst index 36b2ee9e0fdc..15d06facdbc1 100644 --- a/Documentation/media/v4l-drivers/saa7134.rst +++ b/Documentation/media/v4l-drivers/saa7134.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The saa7134 driver ================== diff --git a/Documentation/media/v4l-drivers/saa7164-cardlist.rst b/Documentation/media/v4l-drivers/saa7164-cardlist.rst index e28382ba82e6..e8f36e084537 100644 --- a/Documentation/media/v4l-drivers/saa7164-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7164-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + SAA7164 cards list ================== diff --git a/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst b/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst index e40ffea7708c..822fcb8368ae 100644 --- a/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst +++ b/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver ======================================================================= @@ -114,7 +116,7 @@ window: S_CROP ------ -The API at http://v4l2spec.bytesex.org/spec/x1904.htm says: +The :ref:`V4L2 crop API <crop-scale>` says: "...specification does not define an origin or units. However by convention drivers should horizontally count unscaled samples relative to 0H." diff --git a/Documentation/media/v4l-drivers/si470x.rst b/Documentation/media/v4l-drivers/si470x.rst index 955d8ca159fe..d53bf5f95200 100644 --- a/Documentation/media/v4l-drivers/si470x.rst +++ b/Documentation/media/v4l-drivers/si470x.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> The Silicon Labs Si470x FM Radio Receivers driver diff --git a/Documentation/media/v4l-drivers/si4713.rst b/Documentation/media/v4l-drivers/si4713.rst index 3022e7cfe9a8..be8e6b49b7b4 100644 --- a/Documentation/media/v4l-drivers/si4713.rst +++ b/Documentation/media/v4l-drivers/si4713.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> The Silicon Labs Si4713 FM Radio Transmitter Driver diff --git a/Documentation/media/v4l-drivers/si476x.rst b/Documentation/media/v4l-drivers/si476x.rst index 677512566f15..87062301d6a1 100644 --- a/Documentation/media/v4l-drivers/si476x.rst +++ b/Documentation/media/v4l-drivers/si476x.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> diff --git a/Documentation/media/v4l-drivers/soc-camera.rst b/Documentation/media/v4l-drivers/soc-camera.rst index 79d09e423700..7c39711aebf8 100644 --- a/Documentation/media/v4l-drivers/soc-camera.rst +++ b/Documentation/media/v4l-drivers/soc-camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Soc-Camera Drivers ====================== diff --git a/Documentation/media/v4l-drivers/tm6000-cardlist.rst b/Documentation/media/v4l-drivers/tm6000-cardlist.rst index 6bd083544457..6d2769c0f4d8 100644 --- a/Documentation/media/v4l-drivers/tm6000-cardlist.rst +++ b/Documentation/media/v4l-drivers/tm6000-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + TM6000 cards list ================= diff --git a/Documentation/media/v4l-drivers/tuner-cardlist.rst b/Documentation/media/v4l-drivers/tuner-cardlist.rst index 276dd90e0c59..362617c59c5d 100644 --- a/Documentation/media/v4l-drivers/tuner-cardlist.rst +++ b/Documentation/media/v4l-drivers/tuner-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Tuner cards list ================ diff --git a/Documentation/media/v4l-drivers/tuners.rst b/Documentation/media/v4l-drivers/tuners.rst index c3e8a1cf64a6..7509be888909 100644 --- a/Documentation/media/v4l-drivers/tuners.rst +++ b/Documentation/media/v4l-drivers/tuners.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Tuner drivers ============= diff --git a/Documentation/media/v4l-drivers/usbvision-cardlist.rst b/Documentation/media/v4l-drivers/usbvision-cardlist.rst index 5a8ffbfc204e..6aee115ee6e2 100644 --- a/Documentation/media/v4l-drivers/usbvision-cardlist.rst +++ b/Documentation/media/v4l-drivers/usbvision-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + USBvision cards list ==================== diff --git a/Documentation/media/v4l-drivers/uvcvideo.rst b/Documentation/media/v4l-drivers/uvcvideo.rst index d68b3d59a4b5..e5fd8fad333c 100644 --- a/Documentation/media/v4l-drivers/uvcvideo.rst +++ b/Documentation/media/v4l-drivers/uvcvideo.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Linux USB Video Class (UVC) driver ====================================== diff --git a/Documentation/media/v4l-drivers/v4l-with-ir.rst b/Documentation/media/v4l-drivers/v4l-with-ir.rst index 613e1e79fc96..ce23c8a7bc93 100644 --- a/Documentation/media/v4l-drivers/v4l-with-ir.rst +++ b/Documentation/media/v4l-drivers/v4l-with-ir.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Infrared remote control support in video4linux drivers ====================================================== diff --git a/Documentation/media/v4l-drivers/vivid.rst b/Documentation/media/v4l-drivers/vivid.rst index 089595ce11c5..edb6f33e029c 100644 --- a/Documentation/media/v4l-drivers/vivid.rst +++ b/Documentation/media/v4l-drivers/vivid.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Virtual Video Test Driver (vivid) ===================================== diff --git a/Documentation/media/v4l-drivers/zoran.rst b/Documentation/media/v4l-drivers/zoran.rst index c3a0f7bc2c7b..d2724a863d1d 100644 --- a/Documentation/media/v4l-drivers/zoran.rst +++ b/Documentation/media/v4l-drivers/zoran.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Zoran driver ================ diff --git a/Documentation/media/v4l-drivers/zr364xx.rst b/Documentation/media/v4l-drivers/zr364xx.rst index 3d193f01d8bb..ec8acb3e98fc 100644 --- a/Documentation/media/v4l-drivers/zr364xx.rst +++ b/Documentation/media/v4l-drivers/zr364xx.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Zoran 364xx based USB webcam module =================================== diff --git a/Documentation/media/video.h.rst.exceptions b/Documentation/media/video.h.rst.exceptions index 371cdbd7d062..ea9de59ad8b7 100644 --- a/Documentation/media/video.h.rst.exceptions +++ b/Documentation/media/video.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _UAPI_DVBVIDEO_H_ diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions index 1ec425a7c364..64d348e67df9 100644 --- a/Documentation/media/videodev2.h.rst.exceptions +++ b/Documentation/media/videodev2.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _UAPI__LINUX_VIDEODEV2_H @@ -28,6 +30,7 @@ replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field` # Documented enum v4l2_buf_type replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_SDR_OUTPUT :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_SLICED_VBI_CAPTURE :c:type:`v4l2_buf_type` @@ -161,6 +164,7 @@ replace define V4L2_CAP_META_CAPTURE device-capabilities replace define V4L2_CAP_READWRITE device-capabilities replace define V4L2_CAP_ASYNCIO device-capabilities replace define V4L2_CAP_STREAMING device-capabilities +replace define V4L2_CAP_META_OUTPUT device-capabilities replace define V4L2_CAP_DEVICE_CAPS device-capabilities replace define V4L2_CAP_TOUCH device-capabilities diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index c1d913944ad8..1c22b21ae922 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -587,7 +587,7 @@ leading to the following situation: (Q == &B) and (D == 2) ???? -Whilst this may seem like a failure of coherency or causality maintenance, it +While this may seem like a failure of coherency or causality maintenance, it isn't, and this behaviour can be observed on certain real CPUs (such as the DEC Alpha). @@ -2008,7 +2008,7 @@ for each construct. These operations all imply certain barriers: Certain locking variants of the ACQUIRE operation may fail, either due to being unable to get the lock immediately, or due to receiving an unblocked - signal whilst asleep waiting for the lock to become available. Failed + signal while asleep waiting for the lock to become available. Failed locks do not imply any sort of barrier. [!] Note: one of the consequences of lock ACQUIREs and RELEASEs being only @@ -2508,7 +2508,7 @@ CPU, that CPU's dependency ordering logic will take care of everything else. ATOMIC OPERATIONS ----------------- -Whilst they are technically interprocessor interaction considerations, atomic +While they are technically interprocessor interaction considerations, atomic operations are noted specially as some of them imply full memory barriers and some don't, but they're very heavily relied on as a group throughout the kernel. @@ -2531,7 +2531,7 @@ the device to malfunction. Inside of the Linux kernel, I/O should be done through the appropriate accessor routines - such as inb() or writel() - which know how to make such accesses -appropriately sequential. Whilst this, for the most part, renders the explicit +appropriately sequential. While this, for the most part, renders the explicit use of memory barriers unnecessary, there are a couple of situations where they might be needed: @@ -2555,7 +2555,7 @@ access the device. This may be alleviated - at least in part - by disabling local interrupts (a form of locking), such that the critical operations are all contained within -the interrupt-disabled section in the driver. Whilst the driver's interrupt +the interrupt-disabled section in the driver. While the driver's interrupt routine is executing, the driver's core may not run on the same CPU, and its interrupt is not permitted to happen again until the current interrupt has been handled, thus the interrupt handler does not need to lock against that. @@ -2763,7 +2763,7 @@ CACHE COHERENCY Life isn't quite as simple as it may appear above, however: for while the caches are expected to be coherent, there's no guarantee that that coherency -will be ordered. This means that whilst changes made on one CPU will +will be ordered. This means that while changes made on one CPU will eventually become visible on all CPUs, there's no guarantee that they will become apparent in the same order on those other CPUs. @@ -2799,7 +2799,7 @@ Imagine the system has the following properties: (*) an even-numbered cache line may be in cache B, cache D or it may still be resident in memory; - (*) whilst the CPU core is interrogating one cache, the other cache may be + (*) while the CPU core is interrogating one cache, the other cache may be making use of the bus to access the rest of the system - perhaps to displace a dirty cacheline or to do a speculative load; @@ -2835,7 +2835,7 @@ now imagine that the second CPU wants to read those values: x = *q; The above pair of reads may then fail to happen in the expected order, as the -cacheline holding p may get updated in one of the second CPU's caches whilst +cacheline holding p may get updated in one of the second CPU's caches while the update to the cacheline holding v is delayed in the other of the second CPU's caches by some other cache event: @@ -2855,7 +2855,7 @@ CPU's caches by some other cache event: <C:unbusy> <C:commit v=2> -Basically, whilst both cachelines will be updated on CPU 2 eventually, there's +Basically, while both cachelines will be updated on CPU 2 eventually, there's no guarantee that, without intervention, the order of update will be the same as that committed on CPU 1. @@ -2885,7 +2885,7 @@ coherency queue before processing any further requests: This sort of problem can be encountered on DEC Alpha processors as they have a split cache that improves performance by making better use of the data bus. -Whilst most CPUs do imply a data dependency barrier on the read when a memory +While most CPUs do imply a data dependency barrier on the read when a memory access depends on a read, not all do, so it may not be relied on. Other CPUs may also have split caches, but must coordinate between the various @@ -2974,7 +2974,7 @@ assumption doesn't hold because: thus cutting down on transaction setup costs (memory and PCI devices may both be able to do this); and - (*) the CPU's data cache may affect the ordering, and whilst cache-coherency + (*) the CPU's data cache may affect the ordering, and while cache-coherency mechanisms may alleviate this - once the store has actually hit the cache - there's no guarantee that the coherency management will be propagated in order to other CPUs. diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/device_drivers/3com/3c509.txt index fbf722e15ac3..fbf722e15ac3 100644 --- a/Documentation/networking/3c509.txt +++ b/Documentation/networking/device_drivers/3com/3c509.txt diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/device_drivers/3com/vortex.txt index ad3dead052a4..587f3fcfbcae 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/device_drivers/3com/vortex.txt @@ -1,4 +1,4 @@ -Documentation/networking/vortex.txt +Documentation/networking/device_drivers/3com/vortex.txt Andrew Morton 30 April 2000 diff --git a/Documentation/networking/ena.txt b/Documentation/networking/device_drivers/amazon/ena.txt index 2b4b6f57e549..2b4b6f57e549 100644 --- a/Documentation/networking/ena.txt +++ b/Documentation/networking/device_drivers/amazon/ena.txt diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/device_drivers/chelsio/cxgb.txt index 20a887615c4a..20a887615c4a 100644 --- a/Documentation/networking/cxgb.txt +++ b/Documentation/networking/device_drivers/chelsio/cxgb.txt diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/device_drivers/cirrus/cs89x0.txt index 0e190180eec8..0e190180eec8 100644 --- a/Documentation/networking/cs89x0.txt +++ b/Documentation/networking/device_drivers/cirrus/cs89x0.txt diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/device_drivers/davicom/dm9000.txt index 5552e2e575c5..5552e2e575c5 100644 --- a/Documentation/networking/dm9000.txt +++ b/Documentation/networking/device_drivers/davicom/dm9000.txt diff --git a/Documentation/networking/de4x5.txt b/Documentation/networking/device_drivers/dec/de4x5.txt index c8e4ca9b2c3e..452aac58341d 100644 --- a/Documentation/networking/de4x5.txt +++ b/Documentation/networking/device_drivers/dec/de4x5.txt @@ -84,7 +84,7 @@ Automedia detection is included so that in principle you can disconnect from, e.g. TP, reconnect to BNC and things will still work (after a - pause whilst the driver figures out where its media went). My tests + pause while the driver figures out where its media went). My tests using ping showed that it appears to work.... By default, the driver will now autodetect any DECchip based card. diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/device_drivers/dec/dmfe.txt index 25320bf19c86..25320bf19c86 100644 --- a/Documentation/networking/dmfe.txt +++ b/Documentation/networking/device_drivers/dec/dmfe.txt diff --git a/Documentation/networking/dl2k.txt b/Documentation/networking/device_drivers/dlink/dl2k.txt index cba74f7a3abc..cba74f7a3abc 100644 --- a/Documentation/networking/dl2k.txt +++ b/Documentation/networking/device_drivers/dlink/dl2k.txt diff --git a/Documentation/networking/dpaa.txt b/Documentation/networking/device_drivers/freescale/dpaa.txt index f88194f71c54..f88194f71c54 100644 --- a/Documentation/networking/dpaa.txt +++ b/Documentation/networking/device_drivers/freescale/dpaa.txt diff --git a/Documentation/networking/dpaa2/dpio-driver.rst b/Documentation/networking/device_drivers/freescale/dpaa2/dpio-driver.rst index 13588104161b..a188466b6698 100644 --- a/Documentation/networking/dpaa2/dpio-driver.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/dpio-driver.rst @@ -19,8 +19,8 @@ pool management for network interfaces. This document provides an overview the Linux DPIO driver, its subcomponents, and its APIs. -See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2 -and the general DPAA2 driver architecture in Linux. +See Documentation/networking/device_drivers/freescale/dpaa2/overview.rst for +a general overview of DPAA2 and the general DPAA2 driver architecture in Linux. Driver Overview --------------- diff --git a/Documentation/networking/dpaa2/ethernet-driver.rst b/Documentation/networking/device_drivers/freescale/dpaa2/ethernet-driver.rst index 90ec940749e8..cb4c9a0c5a17 100644 --- a/Documentation/networking/dpaa2/ethernet-driver.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/ethernet-driver.rst @@ -33,7 +33,7 @@ hardware resources, like queues, do not have a corresponding MC object and are treated as internal resources of other objects. For a more detailed description of the DPAA2 architecture and its object -abstractions see *Documentation/networking/dpaa2/overview.rst*. +abstractions see *Documentation/networking/device_drivers/freescale/dpaa2/overview.rst*. Each Linux net device is built on top of a Datapath Network Interface (DPNI) object and uses Buffer Pools (DPBPs), I/O Portals (DPIOs) and Concentrators diff --git a/Documentation/networking/dpaa2/index.rst b/Documentation/networking/device_drivers/freescale/dpaa2/index.rst index 67bd87fe6c53..67bd87fe6c53 100644 --- a/Documentation/networking/dpaa2/index.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/index.rst diff --git a/Documentation/networking/dpaa2/overview.rst b/Documentation/networking/device_drivers/freescale/dpaa2/overview.rst index d638b5a8aadd..d638b5a8aadd 100644 --- a/Documentation/networking/dpaa2/overview.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/overview.rst diff --git a/Documentation/networking/gianfar.txt b/Documentation/networking/device_drivers/freescale/gianfar.txt index ba1daea7f2e4..ba1daea7f2e4 100644 --- a/Documentation/networking/gianfar.txt +++ b/Documentation/networking/device_drivers/freescale/gianfar.txt diff --git a/Documentation/networking/e100.rst b/Documentation/networking/device_drivers/intel/e100.rst index 5e2839b4ec92..5e2839b4ec92 100644 --- a/Documentation/networking/e100.rst +++ b/Documentation/networking/device_drivers/intel/e100.rst diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/device_drivers/intel/e1000.rst index 6379d4d20771..6379d4d20771 100644 --- a/Documentation/networking/e1000.rst +++ b/Documentation/networking/device_drivers/intel/e1000.rst diff --git a/Documentation/networking/e1000e.rst b/Documentation/networking/device_drivers/intel/e1000e.rst index 33554e5416c5..33554e5416c5 100644 --- a/Documentation/networking/e1000e.rst +++ b/Documentation/networking/device_drivers/intel/e1000e.rst diff --git a/Documentation/networking/fm10k.rst b/Documentation/networking/device_drivers/intel/fm10k.rst index bf5e5942f28d..bf5e5942f28d 100644 --- a/Documentation/networking/fm10k.rst +++ b/Documentation/networking/device_drivers/intel/fm10k.rst diff --git a/Documentation/networking/i40e.rst b/Documentation/networking/device_drivers/intel/i40e.rst index 0cc16c525d10..0cc16c525d10 100644 --- a/Documentation/networking/i40e.rst +++ b/Documentation/networking/device_drivers/intel/i40e.rst diff --git a/Documentation/networking/iavf.rst b/Documentation/networking/device_drivers/intel/iavf.rst index f8b42b64eb28..f8b42b64eb28 100644 --- a/Documentation/networking/iavf.rst +++ b/Documentation/networking/device_drivers/intel/iavf.rst diff --git a/Documentation/networking/ice.rst b/Documentation/networking/device_drivers/intel/ice.rst index 4d118b827bbb..4d118b827bbb 100644 --- a/Documentation/networking/ice.rst +++ b/Documentation/networking/device_drivers/intel/ice.rst diff --git a/Documentation/networking/igb.rst b/Documentation/networking/device_drivers/intel/igb.rst index ba16b86d5593..e87a4a72ea2d 100644 --- a/Documentation/networking/igb.rst +++ b/Documentation/networking/device_drivers/intel/igb.rst @@ -177,6 +177,25 @@ rate limit using the IProute2 tool. Download the latest version of the IProute2 tool from Sourceforge if your version does not have all the features you require. +Credit Based Shaper (Qav Mode) +------------------------------ +When enabling the CBS qdisc in the hardware offload mode, traffic shaping using +the CBS (described in the IEEE 802.1Q-2018 Section 8.6.8.2 and discussed in the +Annex L) algorithm will run in the i210 controller, so it's more accurate and +uses less CPU. + +When using offloaded CBS, and the traffic rate obeys the configured rate +(doesn't go above it), CBS should have little to no effect in the latency. + +The offloaded version of the algorithm has some limits, caused by how the idle +slope is expressed in the adapter's registers. It can only represent idle slopes +in 16.38431 kbps units, which means that if a idle slope of 2576kbps is +requested, the controller will be configured to use a idle slope of ~2589 kbps, +because the driver rounds the value up. For more details, see the comments on +:c:func:`igb_config_tx_modes()`. + +NOTE: This feature is exclusive to i210 models. + Support ======= diff --git a/Documentation/networking/igbvf.rst b/Documentation/networking/device_drivers/intel/igbvf.rst index a8a9ffa4f8d3..a8a9ffa4f8d3 100644 --- a/Documentation/networking/igbvf.rst +++ b/Documentation/networking/device_drivers/intel/igbvf.rst diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/device_drivers/intel/ipw2100.txt index 6f85e1d06031..6f85e1d06031 100644 --- a/Documentation/networking/README.ipw2100 +++ b/Documentation/networking/device_drivers/intel/ipw2100.txt diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/device_drivers/intel/ipw2200.txt index b7658bed4906..b7658bed4906 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/device_drivers/intel/ipw2200.txt diff --git a/Documentation/networking/ixgb.rst b/Documentation/networking/device_drivers/intel/ixgb.rst index 8bd80e27843d..8bd80e27843d 100644 --- a/Documentation/networking/ixgb.rst +++ b/Documentation/networking/device_drivers/intel/ixgb.rst diff --git a/Documentation/networking/ixgbe.rst b/Documentation/networking/device_drivers/intel/ixgbe.rst index 725fc697fd8f..86d887a63606 100644 --- a/Documentation/networking/ixgbe.rst +++ b/Documentation/networking/device_drivers/intel/ixgbe.rst @@ -501,6 +501,19 @@ NOTE: This feature can be disabled for a specific Virtual Function (VF):: ip link set <pf dev> vf <vf id> spoofchk {off|on} +IPsec Offload +------------- +The ixgbe driver supports IPsec Hardware Offload. When creating Security +Associations with "ip xfrm ..." the 'offload' tag option can be used to +register the IPsec SA with the driver in order to get higher throughput in +the secure communications. + +The offload is also supported for ixgbe's VFs, but the VF must be set as +'trusted' and the support must be enabled with:: + + ethtool --set-priv-flags eth<x> vf-ipsec on + ip link set eth<x> vf <y> trust on + Known Issues/Troubleshooting ============================ diff --git a/Documentation/networking/ixgbevf.rst b/Documentation/networking/device_drivers/intel/ixgbevf.rst index 56cde6366c2f..56cde6366c2f 100644 --- a/Documentation/networking/ixgbevf.rst +++ b/Documentation/networking/device_drivers/intel/ixgbevf.rst diff --git a/Documentation/networking/netvsc.txt b/Documentation/networking/device_drivers/microsoft/netvsc.txt index 3bfa635bbbd5..3bfa635bbbd5 100644 --- a/Documentation/networking/netvsc.txt +++ b/Documentation/networking/device_drivers/microsoft/netvsc.txt diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/device_drivers/neterion/s2io.txt index 0362a42f7cf4..0362a42f7cf4 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/device_drivers/neterion/s2io.txt diff --git a/Documentation/networking/vxge.txt b/Documentation/networking/device_drivers/neterion/vxge.txt index abfec245f97c..abfec245f97c 100644 --- a/Documentation/networking/vxge.txt +++ b/Documentation/networking/device_drivers/neterion/vxge.txt diff --git a/Documentation/networking/LICENSE.qla3xxx b/Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx index 2f2077e34d81..2f2077e34d81 100644 --- a/Documentation/networking/LICENSE.qla3xxx +++ b/Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic index 2ae3b64983ab..2ae3b64983ab 100644 --- a/Documentation/networking/LICENSE.qlcnic +++ b/Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic diff --git a/Documentation/networking/LICENSE.qlge b/Documentation/networking/device_drivers/qlogic/LICENSE.qlge index ce64e4d15b21..ce64e4d15b21 100644 --- a/Documentation/networking/LICENSE.qlge +++ b/Documentation/networking/device_drivers/qlogic/LICENSE.qlge diff --git a/Documentation/networking/rmnet.txt b/Documentation/networking/device_drivers/qualcomm/rmnet.txt index 6b341eaf2062..6b341eaf2062 100644 --- a/Documentation/networking/rmnet.txt +++ b/Documentation/networking/device_drivers/qualcomm/rmnet.txt diff --git a/Documentation/networking/README.sb1000 b/Documentation/networking/device_drivers/sb1000.txt index f92c2aac56a9..f92c2aac56a9 100644 --- a/Documentation/networking/README.sb1000 +++ b/Documentation/networking/device_drivers/sb1000.txt diff --git a/Documentation/networking/smc9.txt b/Documentation/networking/device_drivers/smsc/smc9.txt index d1e15074e43d..d1e15074e43d 100644 --- a/Documentation/networking/smc9.txt +++ b/Documentation/networking/device_drivers/smsc/smc9.txt diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/device_drivers/stmicro/stmmac.txt index 2bb07078f535..2bb07078f535 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/device_drivers/stmicro/stmmac.txt diff --git a/Documentation/networking/ti-cpsw.txt b/Documentation/networking/device_drivers/ti/cpsw.txt index d4d4c0751a09..d4d4c0751a09 100644 --- a/Documentation/networking/ti-cpsw.txt +++ b/Documentation/networking/device_drivers/ti/cpsw.txt diff --git a/Documentation/networking/tlan.txt b/Documentation/networking/device_drivers/ti/tlan.txt index 34550dfcef74..34550dfcef74 100644 --- a/Documentation/networking/tlan.txt +++ b/Documentation/networking/device_drivers/ti/tlan.txt diff --git a/Documentation/networking/spider_net.txt b/Documentation/networking/device_drivers/toshiba/spider_net.txt index b0b75f8463b3..b0b75f8463b3 100644 --- a/Documentation/networking/spider_net.txt +++ b/Documentation/networking/device_drivers/toshiba/spider_net.txt diff --git a/Documentation/networking/devlink-params.txt b/Documentation/networking/devlink-params.txt index ae444ffe73ac..2d26434ddcf8 100644 --- a/Documentation/networking/devlink-params.txt +++ b/Documentation/networking/devlink-params.txt @@ -40,3 +40,12 @@ msix_vec_per_pf_min [DEVICE, GENERIC] for the device initialization. Value is same across all physical functions (PFs) in the device. Type: u32 + +fw_load_policy [DEVICE, GENERIC] + Controls the device's firmware loading policy. + Valid values: + * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER (0) + Load firmware version preferred by the driver. + * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH (1) + Load firmware currently stored in flash. + Type: u8 diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index bd89dae8d578..6a47629ef8ed 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -31,6 +31,7 @@ Contents: net_failover alias bridge + snmp_counter .. only:: subproject diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 32b21571adfe..acdfb5d2bcaa 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -108,8 +108,8 @@ neigh/default/gc_thresh2 - INTEGER Default: 512 neigh/default/gc_thresh3 - INTEGER - Maximum number of neighbor entries allowed. Increase this - when using large numbers of interfaces and when communicating + Maximum number of non-PERMANENT neighbor entries allowed. Increase + this when using large numbers of interfaces and when communicating with large numbers of directly-connected peers. Default: 1024 @@ -370,6 +370,7 @@ tcp_l3mdev_accept - BOOLEAN derived from the listen socket to be bound to the L3 domain in which the packets originated. Only valid when the kernel was compiled with CONFIG_NET_L3_MASTER_DEV. + Default: 0 (disabled) tcp_low_latency - BOOLEAN This is a legacy option, it has no effect anymore. @@ -758,7 +759,7 @@ tcp_limit_output_bytes - INTEGER flows, for typical pfifo_fast qdiscs. tcp_limit_output_bytes limits the number of bytes on qdisc or device to reduce artificial RTT/cwnd and reduce bufferbloat. - Default: 262144 + Default: 1048576 (16 * 65536) tcp_challenge_ack_limit - INTEGER Limits number of Challenge ACK sent per second, as recommended @@ -773,6 +774,7 @@ udp_l3mdev_accept - BOOLEAN being received regardless of the L3 domain in which they originated. Only valid when the kernel was compiled with CONFIG_NET_L3_MASTER_DEV. + Default: 0 (disabled) udp_mem - vector of 3 INTEGERs: min, pressure, max Number of pages allowed for queueing by all UDP sockets. @@ -799,6 +801,16 @@ udp_wmem_min - INTEGER total pages of UDP sockets exceed udp_mem pressure. The unit is byte. Default: 4K +RAW variables: + +raw_l3mdev_accept - BOOLEAN + Enabling this option allows a "global" bound socket to work + across L3 master domains (e.g., VRFs) with packets capable of + being received regardless of the L3 domain in which they + originated. Only valid when the kernel was compiled with + CONFIG_NET_L3_MASTER_DEV. + Default: 1 (enabled) + CIPSOv4 Variables: cipso_cache_enable - BOOLEAN diff --git a/Documentation/networking/netdev-features.txt b/Documentation/networking/netdev-features.txt index c4a54c162547..58dd1c1e3c65 100644 --- a/Documentation/networking/netdev-features.txt +++ b/Documentation/networking/netdev-features.txt @@ -115,7 +115,7 @@ set, be it TCPv4 (when NETIF_F_TSO is enabled) or TCPv6 (NETIF_F_TSO6). * Transmit UDP segmentation offload -NETIF_F_GSO_UDP_GSO_L4 accepts a single UDP header with a payload that exceeds +NETIF_F_GSO_UDP_L4 accepts a single UDP header with a payload that exceeds gso_size. On segmentation, it segments the payload on gso_size boundaries and replicates the network and UDP headers (fixing up the last one if less than gso_size). diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt index 1669dc2419fd..f75c2ce6e136 100644 --- a/Documentation/networking/nf_conntrack-sysctl.txt +++ b/Documentation/networking/nf_conntrack-sysctl.txt @@ -157,7 +157,16 @@ nf_conntrack_udp_timeout - INTEGER (seconds) default 30 nf_conntrack_udp_timeout_stream - INTEGER (seconds) - default 180 + default 120 This extended timeout will be used in case there is an UDP stream detected. + +nf_conntrack_gre_timeout - INTEGER (seconds) + default 30 + +nf_conntrack_gre_timeout_stream - INTEGER (seconds) + default 180 + + This extended timeout will be used in case there is an GRE stream + detected. diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 605e00cdd6be..c9d052e0cf51 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -661,7 +661,7 @@ A server would be set up to accept operations in the following manner: setsockopt(server, SOL_RXRPC, RXRPC_SECURITY_KEYRING, "AFSkeys", 7); The keyring can be manipulated after it has been given to the socket. This - permits the server to add more keys, replace keys, etc. whilst it is live. + permits the server to add more keys, replace keys, etc. while it is live. (3) A local address must then be bound: @@ -1032,7 +1032,7 @@ The kernel interface functions are as follows: struct sockaddr_rxrpc *srx, struct key *key); - This attempts to partially reinitialise a call and submit it again whilst + This attempts to partially reinitialise a call and submit it again while reusing the original call's Tx queue to avoid the need to repackage and re-encrypt the data to be sent. call indicates the call to retry, srx the new address to send it to and key the encryption key to use for signing or @@ -1056,18 +1056,23 @@ The kernel interface functions are as follows: u32 rxrpc_kernel_check_life(struct socket *sock, struct rxrpc_call *call); + void rxrpc_kernel_probe_life(struct socket *sock, + struct rxrpc_call *call); - This returns a number that is updated when ACKs are received from the peer - (notably including PING RESPONSE ACKs which we can elicit by sending PING - ACKs to see if the call still exists on the server). The caller should - compare the numbers of two calls to see if the call is still alive after - waiting for a suitable interval. + The first function returns a number that is updated when ACKs are received + from the peer (notably including PING RESPONSE ACKs which we can elicit by + sending PING ACKs to see if the call still exists on the server). The + caller should compare the numbers of two calls to see if the call is still + alive after waiting for a suitable interval. This allows the caller to work out if the server is still contactable and - if the call is still alive on the server whilst waiting for the server to + if the call is still alive on the server while waiting for the server to process a client operation. - This function may transmit a PING ACK. + The second function causes a ping ACK to be transmitted to try to provoke + the peer into responding, which would then cause the value returned by the + first function to change. Note that this must be called in TASK_RUNNING + state. (*) Get reply timestamp. @@ -1144,14 +1149,14 @@ adjusted through sysctls in /proc/net/rxrpc/: (*) connection_expiry The amount of time in seconds after a connection was last used before we - remove it from the connection list. Whilst a connection is in existence, + remove it from the connection list. While a connection is in existence, it serves as a placeholder for negotiated security; when it is deleted, the security must be renegotiated. (*) transport_expiry The amount of time in seconds after a transport was last used before we - remove it from the transport list. Whilst a transport is in existence, it + remove it from the transport list. While a transport is in existence, it serves to anchor the peer data and keeps the connection ID counter. (*) rxrpc_rx_window_size diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst new file mode 100644 index 000000000000..f8eb77ddbd44 --- /dev/null +++ b/Documentation/networking/snmp_counter.rst @@ -0,0 +1,1190 @@ +=========== +SNMP counter +=========== + +This document explains the meaning of SNMP counters. + +General IPv4 counters +==================== +All layer 4 packets and ICMP packets will change these counters, but +these counters won't be changed by layer 2 packets (such as STP) or +ARP packets. + +* IpInReceives +Defined in `RFC1213 ipInReceives`_ + +.. _RFC1213 ipInReceives: https://tools.ietf.org/html/rfc1213#page-26 + +The number of packets received by the IP layer. It gets increasing at the +beginning of ip_rcv function, always be updated together with +IpExtInOctets. It will be increased even if the packet is dropped +later (e.g. due to the IP header is invalid or the checksum is wrong +and so on). It indicates the number of aggregated segments after +GRO/LRO. + +* IpInDelivers +Defined in `RFC1213 ipInDelivers`_ + +.. _RFC1213 ipInDelivers: https://tools.ietf.org/html/rfc1213#page-28 + +The number of packets delivers to the upper layer protocols. E.g. TCP, UDP, +ICMP and so on. If no one listens on a raw socket, only kernel +supported protocols will be delivered, if someone listens on the raw +socket, all valid IP packets will be delivered. + +* IpOutRequests +Defined in `RFC1213 ipOutRequests`_ + +.. _RFC1213 ipOutRequests: https://tools.ietf.org/html/rfc1213#page-28 + +The number of packets sent via IP layer, for both single cast and +multicast packets, and would always be updated together with +IpExtOutOctets. + +* IpExtInOctets and IpExtOutOctets +They are Linux kernel extensions, no RFC definitions. Please note, +RFC1213 indeed defines ifInOctets and ifOutOctets, but they +are different things. The ifInOctets and ifOutOctets include the MAC +layer header size but IpExtInOctets and IpExtOutOctets don't, they +only include the IP layer header and the IP layer data. + +* IpExtInNoECTPkts, IpExtInECT1Pkts, IpExtInECT0Pkts, IpExtInCEPkts +They indicate the number of four kinds of ECN IP packets, please refer +`Explicit Congestion Notification`_ for more details. + +.. _Explicit Congestion Notification: https://tools.ietf.org/html/rfc3168#page-6 + +These 4 counters calculate how many packets received per ECN +status. They count the real frame number regardless the LRO/GRO. So +for the same packet, you might find that IpInReceives count 1, but +IpExtInNoECTPkts counts 2 or more. + +* IpInHdrErrors +Defined in `RFC1213 ipInHdrErrors`_. It indicates the packet is +dropped due to the IP header error. It might happen in both IP input +and IP forward paths. + +.. _RFC1213 ipInHdrErrors: https://tools.ietf.org/html/rfc1213#page-27 + +* IpInAddrErrors +Defined in `RFC1213 ipInAddrErrors`_. It will be increased in two +scenarios: (1) The IP address is invalid. (2) The destination IP +address is not a local address and IP forwarding is not enabled + +.. _RFC1213 ipInAddrErrors: https://tools.ietf.org/html/rfc1213#page-27 + +* IpExtInNoRoutes +This counter means the packet is dropped when the IP stack receives a +packet and can't find a route for it from the route table. It might +happen when IP forwarding is enabled and the destination IP address is +not a local address and there is no route for the destination IP +address. + +* IpInUnknownProtos +Defined in `RFC1213 ipInUnknownProtos`_. It will be increased if the +layer 4 protocol is unsupported by kernel. If an application is using +raw socket, kernel will always deliver the packet to the raw socket +and this counter won't be increased. + +.. _RFC1213 ipInUnknownProtos: https://tools.ietf.org/html/rfc1213#page-27 + +* IpExtInTruncatedPkts +For IPv4 packet, it means the actual data size is smaller than the +"Total Length" field in the IPv4 header. + +* IpInDiscards +Defined in `RFC1213 ipInDiscards`_. It indicates the packet is dropped +in the IP receiving path and due to kernel internal reasons (e.g. no +enough memory). + +.. _RFC1213 ipInDiscards: https://tools.ietf.org/html/rfc1213#page-28 + +* IpOutDiscards +Defined in `RFC1213 ipOutDiscards`_. It indicates the packet is +dropped in the IP sending path and due to kernel internal reasons. + +.. _RFC1213 ipOutDiscards: https://tools.ietf.org/html/rfc1213#page-28 + +* IpOutNoRoutes +Defined in `RFC1213 ipOutNoRoutes`_. It indicates the packet is +dropped in the IP sending path and no route is found for it. + +.. _RFC1213 ipOutNoRoutes: https://tools.ietf.org/html/rfc1213#page-29 + +ICMP counters +============ +* IcmpInMsgs and IcmpOutMsgs +Defined by `RFC1213 icmpInMsgs`_ and `RFC1213 icmpOutMsgs`_ + +.. _RFC1213 icmpInMsgs: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpOutMsgs: https://tools.ietf.org/html/rfc1213#page-43 + +As mentioned in the RFC1213, these two counters include errors, they +would be increased even if the ICMP packet has an invalid type. The +ICMP output path will check the header of a raw socket, so the +IcmpOutMsgs would still be updated if the IP header is constructed by +a userspace program. + +* ICMP named types +| These counters include most of common ICMP types, they are: +| IcmpInDestUnreachs: `RFC1213 icmpInDestUnreachs`_ +| IcmpInTimeExcds: `RFC1213 icmpInTimeExcds`_ +| IcmpInParmProbs: `RFC1213 icmpInParmProbs`_ +| IcmpInSrcQuenchs: `RFC1213 icmpInSrcQuenchs`_ +| IcmpInRedirects: `RFC1213 icmpInRedirects`_ +| IcmpInEchos: `RFC1213 icmpInEchos`_ +| IcmpInEchoReps: `RFC1213 icmpInEchoReps`_ +| IcmpInTimestamps: `RFC1213 icmpInTimestamps`_ +| IcmpInTimestampReps: `RFC1213 icmpInTimestampReps`_ +| IcmpInAddrMasks: `RFC1213 icmpInAddrMasks`_ +| IcmpInAddrMaskReps: `RFC1213 icmpInAddrMaskReps`_ +| IcmpOutDestUnreachs: `RFC1213 icmpOutDestUnreachs`_ +| IcmpOutTimeExcds: `RFC1213 icmpOutTimeExcds`_ +| IcmpOutParmProbs: `RFC1213 icmpOutParmProbs`_ +| IcmpOutSrcQuenchs: `RFC1213 icmpOutSrcQuenchs`_ +| IcmpOutRedirects: `RFC1213 icmpOutRedirects`_ +| IcmpOutEchos: `RFC1213 icmpOutEchos`_ +| IcmpOutEchoReps: `RFC1213 icmpOutEchoReps`_ +| IcmpOutTimestamps: `RFC1213 icmpOutTimestamps`_ +| IcmpOutTimestampReps: `RFC1213 icmpOutTimestampReps`_ +| IcmpOutAddrMasks: `RFC1213 icmpOutAddrMasks`_ +| IcmpOutAddrMaskReps: `RFC1213 icmpOutAddrMaskReps`_ + +.. _RFC1213 icmpInDestUnreachs: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpInTimeExcds: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpInParmProbs: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInSrcQuenchs: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInRedirects: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInEchos: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInEchoReps: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInTimestamps: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInTimestampReps: https://tools.ietf.org/html/rfc1213#page-43 +.. _RFC1213 icmpInAddrMasks: https://tools.ietf.org/html/rfc1213#page-43 +.. _RFC1213 icmpInAddrMaskReps: https://tools.ietf.org/html/rfc1213#page-43 + +.. _RFC1213 icmpOutDestUnreachs: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutTimeExcds: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutParmProbs: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutSrcQuenchs: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutRedirects: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutEchos: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutEchoReps: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutTimestamps: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutTimestampReps: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutAddrMasks: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutAddrMaskReps: https://tools.ietf.org/html/rfc1213#page-46 + +Every ICMP type has two counters: 'In' and 'Out'. E.g., for the ICMP +Echo packet, they are IcmpInEchos and IcmpOutEchos. Their meanings are +straightforward. The 'In' counter means kernel receives such a packet +and the 'Out' counter means kernel sends such a packet. + +* ICMP numeric types +They are IcmpMsgInType[N] and IcmpMsgOutType[N], the [N] indicates the +ICMP type number. These counters track all kinds of ICMP packets. The +ICMP type number definition could be found in the `ICMP parameters`_ +document. + +.. _ICMP parameters: https://www.iana.org/assignments/icmp-parameters/icmp-parameters.xhtml + +For example, if the Linux kernel sends an ICMP Echo packet, the +IcmpMsgOutType8 would increase 1. And if kernel gets an ICMP Echo Reply +packet, IcmpMsgInType0 would increase 1. + +* IcmpInCsumErrors +This counter indicates the checksum of the ICMP packet is +wrong. Kernel verifies the checksum after updating the IcmpInMsgs and +before updating IcmpMsgInType[N]. If a packet has bad checksum, the +IcmpInMsgs would be updated but none of IcmpMsgInType[N] would be updated. + +* IcmpInErrors and IcmpOutErrors +Defined by `RFC1213 icmpInErrors`_ and `RFC1213 icmpOutErrors`_ + +.. _RFC1213 icmpInErrors: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpOutErrors: https://tools.ietf.org/html/rfc1213#page-43 + +When an error occurs in the ICMP packet handler path, these two +counters would be updated. The receiving packet path use IcmpInErrors +and the sending packet path use IcmpOutErrors. When IcmpInCsumErrors +is increased, IcmpInErrors would always be increased too. + +relationship of the ICMP counters +------------------------------- +The sum of IcmpMsgOutType[N] is always equal to IcmpOutMsgs, as they +are updated at the same time. The sum of IcmpMsgInType[N] plus +IcmpInErrors should be equal or larger than IcmpInMsgs. When kernel +receives an ICMP packet, kernel follows below logic: + +1. increase IcmpInMsgs +2. if has any error, update IcmpInErrors and finish the process +3. update IcmpMsgOutType[N] +4. handle the packet depending on the type, if has any error, update + IcmpInErrors and finish the process + +So if all errors occur in step (2), IcmpInMsgs should be equal to the +sum of IcmpMsgOutType[N] plus IcmpInErrors. If all errors occur in +step (4), IcmpInMsgs should be equal to the sum of +IcmpMsgOutType[N]. If the errors occur in both step (2) and step (4), +IcmpInMsgs should be less than the sum of IcmpMsgOutType[N] plus +IcmpInErrors. + +General TCP counters +================== +* TcpInSegs +Defined in `RFC1213 tcpInSegs`_ + +.. _RFC1213 tcpInSegs: https://tools.ietf.org/html/rfc1213#page-48 + +The number of packets received by the TCP layer. As mentioned in +RFC1213, it includes the packets received in error, such as checksum +error, invalid TCP header and so on. Only one error won't be included: +if the layer 2 destination address is not the NIC's layer 2 +address. It might happen if the packet is a multicast or broadcast +packet, or the NIC is in promiscuous mode. In these situations, the +packets would be delivered to the TCP layer, but the TCP layer will discard +these packets before increasing TcpInSegs. The TcpInSegs counter +isn't aware of GRO. So if two packets are merged by GRO, the TcpInSegs +counter would only increase 1. + +* TcpOutSegs +Defined in `RFC1213 tcpOutSegs`_ + +.. _RFC1213 tcpOutSegs: https://tools.ietf.org/html/rfc1213#page-48 + +The number of packets sent by the TCP layer. As mentioned in RFC1213, +it excludes the retransmitted packets. But it includes the SYN, ACK +and RST packets. Doesn't like TcpInSegs, the TcpOutSegs is aware of +GSO, so if a packet would be split to 2 by GSO, TcpOutSegs will +increase 2. + +* TcpActiveOpens +Defined in `RFC1213 tcpActiveOpens`_ + +.. _RFC1213 tcpActiveOpens: https://tools.ietf.org/html/rfc1213#page-47 + +It means the TCP layer sends a SYN, and come into the SYN-SENT +state. Every time TcpActiveOpens increases 1, TcpOutSegs should always +increase 1. + +* TcpPassiveOpens +Defined in `RFC1213 tcpPassiveOpens`_ + +.. _RFC1213 tcpPassiveOpens: https://tools.ietf.org/html/rfc1213#page-47 + +It means the TCP layer receives a SYN, replies a SYN+ACK, come into +the SYN-RCVD state. + +* TcpExtTCPRcvCoalesce +When packets are received by the TCP layer and are not be read by the +application, the TCP layer will try to merge them. This counter +indicate how many packets are merged in such situation. If GRO is +enabled, lots of packets would be merged by GRO, these packets +wouldn't be counted to TcpExtTCPRcvCoalesce. + +* TcpExtTCPAutoCorking +When sending packets, the TCP layer will try to merge small packets to +a bigger one. This counter increase 1 for every packet merged in such +situation. Please refer to the LWN article for more details: +https://lwn.net/Articles/576263/ + +* TcpExtTCPOrigDataSent +This counter is explained by `kernel commit f19c29e3e391`_, I pasted the +explaination below:: + + TCPOrigDataSent: number of outgoing packets with original data (excluding + retransmission but including data-in-SYN). This counter is different from + TcpOutSegs because TcpOutSegs also tracks pure ACKs. TCPOrigDataSent is + more useful to track the TCP retransmission rate. + +* TCPSynRetrans +This counter is explained by `kernel commit f19c29e3e391`_, I pasted the +explaination below:: + + TCPSynRetrans: number of SYN and SYN/ACK retransmits to break down + retransmissions into SYN, fast-retransmits, timeout retransmits, etc. + +* TCPFastOpenActiveFail +This counter is explained by `kernel commit f19c29e3e391`_, I pasted the +explaination below:: + + TCPFastOpenActiveFail: Fast Open attempts (SYN/data) failed because + the remote does not accept it or the attempts timed out. + +.. _kernel commit f19c29e3e391: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f19c29e3e391a66a273e9afebaf01917245148cd + +* TcpExtListenOverflows and TcpExtListenDrops +When kernel receives a SYN from a client, and if the TCP accept queue +is full, kernel will drop the SYN and add 1 to TcpExtListenOverflows. +At the same time kernel will also add 1 to TcpExtListenDrops. When a +TCP socket is in LISTEN state, and kernel need to drop a packet, +kernel would always add 1 to TcpExtListenDrops. So increase +TcpExtListenOverflows would let TcpExtListenDrops increasing at the +same time, but TcpExtListenDrops would also increase without +TcpExtListenOverflows increasing, e.g. a memory allocation fail would +also let TcpExtListenDrops increase. + +Note: The above explanation is based on kernel 4.10 or above version, on +an old kernel, the TCP stack has different behavior when TCP accept +queue is full. On the old kernel, TCP stack won't drop the SYN, it +would complete the 3-way handshake. As the accept queue is full, TCP +stack will keep the socket in the TCP half-open queue. As it is in the +half open queue, TCP stack will send SYN+ACK on an exponential backoff +timer, after client replies ACK, TCP stack checks whether the accept +queue is still full, if it is not full, moves the socket to the accept +queue, if it is full, keeps the socket in the half-open queue, at next +time client replies ACK, this socket will get another chance to move +to the accept queue. + + +TCP Fast Open +============ +When kernel receives a TCP packet, it has two paths to handler the +packet, one is fast path, another is slow path. The comment in kernel +code provides a good explanation of them, I pasted them below:: + + It is split into a fast path and a slow path. The fast path is + disabled when: + + - A zero window was announced from us + - zero window probing + is only handled properly on the slow path. + - Out of order segments arrived. + - Urgent data is expected. + - There is no buffer space left + - Unexpected TCP flags/window values/header lengths are received + (detected by checking the TCP header against pred_flags) + - Data is sent in both directions. The fast path only supports pure senders + or pure receivers (this means either the sequence number or the ack + value must stay constant) + - Unexpected TCP option. + +Kernel will try to use fast path unless any of the above conditions +are satisfied. If the packets are out of order, kernel will handle +them in slow path, which means the performance might be not very +good. Kernel would also come into slow path if the "Delayed ack" is +used, because when using "Delayed ack", the data is sent in both +directions. When the TCP window scale option is not used, kernel will +try to enable fast path immediately when the connection comes into the +established state, but if the TCP window scale option is used, kernel +will disable the fast path at first, and try to enable it after kernel +receives packets. + +* TcpExtTCPPureAcks and TcpExtTCPHPAcks +If a packet set ACK flag and has no data, it is a pure ACK packet, if +kernel handles it in the fast path, TcpExtTCPHPAcks will increase 1, +if kernel handles it in the slow path, TcpExtTCPPureAcks will +increase 1. + +* TcpExtTCPHPHits +If a TCP packet has data (which means it is not a pure ACK packet), +and this packet is handled in the fast path, TcpExtTCPHPHits will +increase 1. + + +TCP abort +======== + + +* TcpExtTCPAbortOnData +It means TCP layer has data in flight, but need to close the +connection. So TCP layer sends a RST to the other side, indicate the +connection is not closed very graceful. An easy way to increase this +counter is using the SO_LINGER option. Please refer to the SO_LINGER +section of the `socket man page`_: + +.. _socket man page: http://man7.org/linux/man-pages/man7/socket.7.html + +By default, when an application closes a connection, the close function +will return immediately and kernel will try to send the in-flight data +async. If you use the SO_LINGER option, set l_onoff to 1, and l_linger +to a positive number, the close function won't return immediately, but +wait for the in-flight data are acked by the other side, the max wait +time is l_linger seconds. If set l_onoff to 1 and set l_linger to 0, +when the application closes a connection, kernel will send a RST +immediately and increase the TcpExtTCPAbortOnData counter. + +* TcpExtTCPAbortOnClose +This counter means the application has unread data in the TCP layer when +the application wants to close the TCP connection. In such a situation, +kernel will send a RST to the other side of the TCP connection. + +* TcpExtTCPAbortOnMemory +When an application closes a TCP connection, kernel still need to track +the connection, let it complete the TCP disconnect process. E.g. an +app calls the close method of a socket, kernel sends fin to the other +side of the connection, then the app has no relationship with the +socket any more, but kernel need to keep the socket, this socket +becomes an orphan socket, kernel waits for the reply of the other side, +and would come to the TIME_WAIT state finally. When kernel has no +enough memory to keep the orphan socket, kernel would send an RST to +the other side, and delete the socket, in such situation, kernel will +increase 1 to the TcpExtTCPAbortOnMemory. Two conditions would trigger +TcpExtTCPAbortOnMemory: + +1. the memory used by the TCP protocol is higher than the third value of +the tcp_mem. Please refer the tcp_mem section in the `TCP man page`_: + +.. _TCP man page: http://man7.org/linux/man-pages/man7/tcp.7.html + +2. the orphan socket count is higher than net.ipv4.tcp_max_orphans + + +* TcpExtTCPAbortOnTimeout +This counter will increase when any of the TCP timers expire. In such +situation, kernel won't send RST, just give up the connection. + +* TcpExtTCPAbortOnLinger +When a TCP connection comes into FIN_WAIT_2 state, instead of waiting +for the fin packet from the other side, kernel could send a RST and +delete the socket immediately. This is not the default behavior of +Linux kernel TCP stack. By configuring the TCP_LINGER2 socket option, +you could let kernel follow this behavior. + +* TcpExtTCPAbortFailed +The kernel TCP layer will send RST if the `RFC2525 2.17 section`_ is +satisfied. If an internal error occurs during this process, +TcpExtTCPAbortFailed will be increased. + +.. _RFC2525 2.17 section: https://tools.ietf.org/html/rfc2525#page-50 + +TCP Hybrid Slow Start +==================== +The Hybrid Slow Start algorithm is an enhancement of the traditional +TCP congestion window Slow Start algorithm. It uses two pieces of +information to detect whether the max bandwidth of the TCP path is +approached. The two pieces of information are ACK train length and +increase in packet delay. For detail information, please refer the +`Hybrid Slow Start paper`_. Either ACK train length or packet delay +hits a specific threshold, the congestion control algorithm will come +into the Congestion Avoidance state. Until v4.20, two congestion +control algorithms are using Hybrid Slow Start, they are cubic (the +default congestion control algorithm) and cdg. Four snmp counters +relate with the Hybrid Slow Start algorithm. + +.. _Hybrid Slow Start paper: https://pdfs.semanticscholar.org/25e9/ef3f03315782c7f1cbcd31b587857adae7d1.pdf + +* TcpExtTCPHystartTrainDetect +How many times the ACK train length threshold is detected + +* TcpExtTCPHystartTrainCwnd +The sum of CWND detected by ACK train length. Dividing this value by +TcpExtTCPHystartTrainDetect is the average CWND which detected by the +ACK train length. + +* TcpExtTCPHystartDelayDetect +How many times the packet delay threshold is detected. + +* TcpExtTCPHystartDelayCwnd +The sum of CWND detected by packet delay. Dividing this value by +TcpExtTCPHystartDelayDetect is the average CWND which detected by the +packet delay. + +TCP retransmission and congestion control +====================================== +The TCP protocol has two retransmission mechanisms: SACK and fast +recovery. They are exclusive with each other. When SACK is enabled, +the kernel TCP stack would use SACK, or kernel would use fast +recovery. The SACK is a TCP option, which is defined in `RFC2018`_, +the fast recovery is defined in `RFC6582`_, which is also called +'Reno'. + +The TCP congestion control is a big and complex topic. To understand +the related snmp counter, we need to know the states of the congestion +control state machine. There are 5 states: Open, Disorder, CWR, +Recovery and Loss. For details about these states, please refer page 5 +and page 6 of this document: +https://pdfs.semanticscholar.org/0e9c/968d09ab2e53e24c4dca5b2d67c7f7140f8e.pdf + +.. _RFC2018: https://tools.ietf.org/html/rfc2018 +.. _RFC6582: https://tools.ietf.org/html/rfc6582 + +* TcpExtTCPRenoRecovery and TcpExtTCPSackRecovery +When the congestion control comes into Recovery state, if sack is +used, TcpExtTCPSackRecovery increases 1, if sack is not used, +TcpExtTCPRenoRecovery increases 1. These two counters mean the TCP +stack begins to retransmit the lost packets. + +* TcpExtTCPSACKReneging +A packet was acknowledged by SACK, but the receiver has dropped this +packet, so the sender needs to retransmit this packet. In this +situation, the sender adds 1 to TcpExtTCPSACKReneging. A receiver +could drop a packet which has been acknowledged by SACK, although it is +unusual, it is allowed by the TCP protocol. The sender doesn't really +know what happened on the receiver side. The sender just waits until +the RTO expires for this packet, then the sender assumes this packet +has been dropped by the receiver. + +* TcpExtTCPRenoReorder +The reorder packet is detected by fast recovery. It would only be used +if SACK is disabled. The fast recovery algorithm detects recorder by +the duplicate ACK number. E.g., if retransmission is triggered, and +the original retransmitted packet is not lost, it is just out of +order, the receiver would acknowledge multiple times, one for the +retransmitted packet, another for the arriving of the original out of +order packet. Thus the sender would find more ACks than its +expectation, and the sender knows out of order occurs. + +* TcpExtTCPTSReorder +The reorder packet is detected when a hole is filled. E.g., assume the +sender sends packet 1,2,3,4,5, and the receiving order is +1,2,4,5,3. When the sender receives the ACK of packet 3 (which will +fill the hole), two conditions will let TcpExtTCPTSReorder increase +1: (1) if the packet 3 is not re-retransmitted yet. (2) if the packet +3 is retransmitted but the timestamp of the packet 3's ACK is earlier +than the retransmission timestamp. + +* TcpExtTCPSACKReorder +The reorder packet detected by SACK. The SACK has two methods to +detect reorder: (1) DSACK is received by the sender. It means the +sender sends the same packet more than one times. And the only reason +is the sender believes an out of order packet is lost so it sends the +packet again. (2) Assume packet 1,2,3,4,5 are sent by the sender, and +the sender has received SACKs for packet 2 and 5, now the sender +receives SACK for packet 4 and the sender doesn't retransmit the +packet yet, the sender would know packet 4 is out of order. The TCP +stack of kernel will increase TcpExtTCPSACKReorder for both of the +above scenarios. + + +DSACK +===== +The DSACK is defined in `RFC2883`_. The receiver uses DSACK to report +duplicate packets to the sender. There are two kinds of +duplications: (1) a packet which has been acknowledged is +duplicate. (2) an out of order packet is duplicate. The TCP stack +counts these two kinds of duplications on both receiver side and +sender side. + +.. _RFC2883 : https://tools.ietf.org/html/rfc2883 + +* TcpExtTCPDSACKOldSent +The TCP stack receives a duplicate packet which has been acked, so it +sends a DSACK to the sender. + +* TcpExtTCPDSACKOfoSent +The TCP stack receives an out of order duplicate packet, so it sends a +DSACK to the sender. + +* TcpExtTCPDSACKRecv +The TCP stack receives a DSACK, which indicate an acknowledged +duplicate packet is received. + +* TcpExtTCPDSACKOfoRecv +The TCP stack receives a DSACK, which indicate an out of order +duplciate packet is received. + +examples +======= + +ping test +-------- +Run the ping command against the public dns server 8.8.8.8:: + + nstatuser@nstat-a:~$ ping 8.8.8.8 -c 1 + PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. + 64 bytes from 8.8.8.8: icmp_seq=1 ttl=119 time=17.8 ms + + --- 8.8.8.8 ping statistics --- + 1 packets transmitted, 1 received, 0% packet loss, time 0ms + rtt min/avg/max/mdev = 17.875/17.875/17.875/0.000 ms + +The nstayt result:: + + nstatuser@nstat-a:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + IcmpInMsgs 1 0.0 + IcmpInEchoReps 1 0.0 + IcmpOutMsgs 1 0.0 + IcmpOutEchos 1 0.0 + IcmpMsgInType0 1 0.0 + IcmpMsgOutType8 1 0.0 + IpExtInOctets 84 0.0 + IpExtOutOctets 84 0.0 + IpExtInNoECTPkts 1 0.0 + +The Linux server sent an ICMP Echo packet, so IpOutRequests, +IcmpOutMsgs, IcmpOutEchos and IcmpMsgOutType8 were increased 1. The +server got ICMP Echo Reply from 8.8.8.8, so IpInReceives, IcmpInMsgs, +IcmpInEchoReps and IcmpMsgInType0 were increased 1. The ICMP Echo Reply +was passed to the ICMP layer via IP layer, so IpInDelivers was +increased 1. The default ping data size is 48, so an ICMP Echo packet +and its corresponding Echo Reply packet are constructed by: + +* 14 bytes MAC header +* 20 bytes IP header +* 16 bytes ICMP header +* 48 bytes data (default value of the ping command) + +So the IpExtInOctets and IpExtOutOctets are 20+16+48=84. + +tcp 3-way handshake +------------------ +On server side, we run:: + + nstatuser@nstat-b:~$ nc -lknv 0.0.0.0 9000 + Listening on [0.0.0.0] (family 0, port 9000) + +On client side, we run:: + + nstatuser@nstat-a:~$ nc -nv 192.168.122.251 9000 + Connection to 192.168.122.251 9000 port [tcp/*] succeeded! + +The server listened on tcp 9000 port, the client connected to it, they +completed the 3-way handshake. + +On server side, we can find below nstat output:: + + nstatuser@nstat-b:~$ nstat | grep -i tcp + TcpPassiveOpens 1 0.0 + TcpInSegs 2 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPPureAcks 1 0.0 + +On client side, we can find below nstat output:: + + nstatuser@nstat-a:~$ nstat | grep -i tcp + TcpActiveOpens 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 2 0.0 + +When the server received the first SYN, it replied a SYN+ACK, and came into +SYN-RCVD state, so TcpPassiveOpens increased 1. The server received +SYN, sent SYN+ACK, received ACK, so server sent 1 packet, received 2 +packets, TcpInSegs increased 2, TcpOutSegs increased 1. The last ACK +of the 3-way handshake is a pure ACK without data, so +TcpExtTCPPureAcks increased 1. + +When the client sent SYN, the client came into the SYN-SENT state, so +TcpActiveOpens increased 1, the client sent SYN, received SYN+ACK, sent +ACK, so client sent 2 packets, received 1 packet, TcpInSegs increased +1, TcpOutSegs increased 2. + +TCP normal traffic +----------------- +Run nc on server:: + + nstatuser@nstat-b:~$ nc -lkv 0.0.0.0 9000 + Listening on [0.0.0.0] (family 0, port 9000) + +Run nc on client:: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + +Input a string in the nc client ('hello' in our example):: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + hello + +The client side nstat output:: + + nstatuser@nstat-a:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPPureAcks 1 0.0 + TcpExtTCPOrigDataSent 1 0.0 + IpExtInOctets 52 0.0 + IpExtOutOctets 58 0.0 + IpExtInNoECTPkts 1 0.0 + +The server side nstat output:: + + nstatuser@nstat-b:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + IpExtInOctets 58 0.0 + IpExtOutOctets 52 0.0 + IpExtInNoECTPkts 1 0.0 + +Input a string in nc client side again ('world' in our exmaple):: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + hello + world + +Client side nstat output:: + + nstatuser@nstat-a:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPHPAcks 1 0.0 + TcpExtTCPOrigDataSent 1 0.0 + IpExtInOctets 52 0.0 + IpExtOutOctets 58 0.0 + IpExtInNoECTPkts 1 0.0 + + +Server side nstat output:: + + nstatuser@nstat-b:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPHPHits 1 0.0 + IpExtInOctets 58 0.0 + IpExtOutOctets 52 0.0 + IpExtInNoECTPkts 1 0.0 + +Compare the first client-side nstat and the second client-side nstat, +we could find one difference: the first one had a 'TcpExtTCPPureAcks', +but the second one had a 'TcpExtTCPHPAcks'. The first server-side +nstat and the second server-side nstat had a difference too: the +second server-side nstat had a TcpExtTCPHPHits, but the first +server-side nstat didn't have it. The network traffic patterns were +exactly the same: the client sent a packet to the server, the server +replied an ACK. But kernel handled them in different ways. When the +TCP window scale option is not used, kernel will try to enable fast +path immediately when the connection comes into the established state, +but if the TCP window scale option is used, kernel will disable the +fast path at first, and try to enable it after kerenl receives +packets. We could use the 'ss' command to verify whether the window +scale option is used. e.g. run below command on either server or +client:: + + nstatuser@nstat-a:~$ ss -o state established -i '( dport = :9000 or sport = :9000 ) + Netid Recv-Q Send-Q Local Address:Port Peer Address:Port + tcp 0 0 192.168.122.250:40654 192.168.122.251:9000 + ts sack cubic wscale:7,7 rto:204 rtt:0.98/0.49 mss:1448 pmtu:1500 rcvmss:536 advmss:1448 cwnd:10 bytes_acked:1 segs_out:2 segs_in:1 send 118.2Mbps lastsnd:46572 lastrcv:46572 lastack:46572 pacing_rate 236.4Mbps rcv_space:29200 rcv_ssthresh:29200 minrtt:0.98 + +The 'wscale:7,7' means both server and client set the window scale +option to 7. Now we could explain the nstat output in our test: + +In the first nstat output of client side, the client sent a packet, server +reply an ACK, when kernel handled this ACK, the fast path was not +enabled, so the ACK was counted into 'TcpExtTCPPureAcks'. + +In the second nstat output of client side, the client sent a packet again, +and received another ACK from the server, in this time, the fast path is +enabled, and the ACK was qualified for fast path, so it was handled by +the fast path, so this ACK was counted into TcpExtTCPHPAcks. + +In the first nstat output of server side, fast path was not enabled, +so there was no 'TcpExtTCPHPHits'. + +In the second nstat output of server side, the fast path was enabled, +and the packet received from client qualified for fast path, so it +was counted into 'TcpExtTCPHPHits'. + +TcpExtTCPAbortOnClose +-------------------- +On the server side, we run below python script:: + + import socket + import time + + port = 9000 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(1) + sock, addr = s.accept() + while True: + time.sleep(9999999) + +This python script listen on 9000 port, but doesn't read anything from +the connection. + +On the client side, we send the string "hello" by nc:: + + nstatuser@nstat-a:~$ echo "hello" | nc nstat-b 9000 + +Then, we come back to the server side, the server has received the "hello" +packet, and the TCP layer has acked this packet, but the application didn't +read it yet. We type Ctrl-C to terminate the server script. Then we +could find TcpExtTCPAbortOnClose increased 1 on the server side:: + + nstatuser@nstat-b:~$ nstat | grep -i abort + TcpExtTCPAbortOnClose 1 0.0 + +If we run tcpdump on the server side, we could find the server sent a +RST after we type Ctrl-C. + +TcpExtTCPAbortOnMemory and TcpExtTCPAbortOnTimeout +----------------------------------------------- +Below is an example which let the orphan socket count be higher than +net.ipv4.tcp_max_orphans. +Change tcp_max_orphans to a smaller value on client:: + + sudo bash -c "echo 10 > /proc/sys/net/ipv4/tcp_max_orphans" + +Client code (create 64 connection to server):: + + nstatuser@nstat-a:~$ cat client_orphan.py + import socket + import time + + server = 'nstat-b' # server address + port = 9000 + + count = 64 + + connection_list = [] + + for i in range(64): + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.connect((server, port)) + connection_list.append(s) + print("connection_count: %d" % len(connection_list)) + + while True: + time.sleep(99999) + +Server code (accept 64 connection from client):: + + nstatuser@nstat-b:~$ cat server_orphan.py + import socket + import time + + port = 9000 + count = 64 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(count) + connection_list = [] + while True: + sock, addr = s.accept() + connection_list.append((sock, addr)) + print("connection_count: %d" % len(connection_list)) + +Run the python scripts on server and client. + +On server:: + + python3 server_orphan.py + +On client:: + + python3 client_orphan.py + +Run iptables on server:: + + sudo iptables -A INPUT -i ens3 -p tcp --destination-port 9000 -j DROP + +Type Ctrl-C on client, stop client_orphan.py. + +Check TcpExtTCPAbortOnMemory on client:: + + nstatuser@nstat-a:~$ nstat | grep -i abort + TcpExtTCPAbortOnMemory 54 0.0 + +Check orphane socket count on client:: + + nstatuser@nstat-a:~$ ss -s + Total: 131 (kernel 0) + TCP: 14 (estab 1, closed 0, orphaned 10, synrecv 0, timewait 0/0), ports 0 + + Transport Total IP IPv6 + * 0 - - + RAW 1 0 1 + UDP 1 1 0 + TCP 14 13 1 + INET 16 14 2 + FRAG 0 0 0 + +The explanation of the test: after run server_orphan.py and +client_orphan.py, we set up 64 connections between server and +client. Run the iptables command, the server will drop all packets from +the client, type Ctrl-C on client_orphan.py, the system of the client +would try to close these connections, and before they are closed +gracefully, these connections became orphan sockets. As the iptables +of the server blocked packets from the client, the server won't receive fin +from the client, so all connection on clients would be stuck on FIN_WAIT_1 +stage, so they will keep as orphan sockets until timeout. We have echo +10 to /proc/sys/net/ipv4/tcp_max_orphans, so the client system would +only keep 10 orphan sockets, for all other orphan sockets, the client +system sent RST for them and delete them. We have 64 connections, so +the 'ss -s' command shows the system has 10 orphan sockets, and the +value of TcpExtTCPAbortOnMemory was 54. + +An additional explanation about orphan socket count: You could find the +exactly orphan socket count by the 'ss -s' command, but when kernel +decide whither increases TcpExtTCPAbortOnMemory and sends RST, kernel +doesn't always check the exactly orphan socket count. For increasing +performance, kernel checks an approximate count firstly, if the +approximate count is more than tcp_max_orphans, kernel checks the +exact count again. So if the approximate count is less than +tcp_max_orphans, but exactly count is more than tcp_max_orphans, you +would find TcpExtTCPAbortOnMemory is not increased at all. If +tcp_max_orphans is large enough, it won't occur, but if you decrease +tcp_max_orphans to a small value like our test, you might find this +issue. So in our test, the client set up 64 connections although the +tcp_max_orphans is 10. If the client only set up 11 connections, we +can't find the change of TcpExtTCPAbortOnMemory. + +Continue the previous test, we wait for several minutes. Because of the +iptables on the server blocked the traffic, the server wouldn't receive +fin, and all the client's orphan sockets would timeout on the +FIN_WAIT_1 state finally. So we wait for a few minutes, we could find +10 timeout on the client:: + + nstatuser@nstat-a:~$ nstat | grep -i abort + TcpExtTCPAbortOnTimeout 10 0.0 + +TcpExtTCPAbortOnLinger +--------------------- +The server side code:: + + nstatuser@nstat-b:~$ cat server_linger.py + import socket + import time + + port = 9000 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(1) + sock, addr = s.accept() + while True: + time.sleep(9999999) + +The client side code:: + + nstatuser@nstat-a:~$ cat client_linger.py + import socket + import struct + + server = 'nstat-b' # server address + port = 9000 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.setsockopt(socket.SOL_SOCKET, socket.SO_LINGER, struct.pack('ii', 1, 10)) + s.setsockopt(socket.SOL_TCP, socket.TCP_LINGER2, struct.pack('i', -1)) + s.connect((server, port)) + s.close() + +Run server_linger.py on server:: + + nstatuser@nstat-b:~$ python3 server_linger.py + +Run client_linger.py on client:: + + nstatuser@nstat-a:~$ python3 client_linger.py + +After run client_linger.py, check the output of nstat:: + + nstatuser@nstat-a:~$ nstat | grep -i abort + TcpExtTCPAbortOnLinger 1 0.0 + +TcpExtTCPRcvCoalesce +------------------- +On the server, we run a program which listen on TCP port 9000, but +doesn't read any data:: + + import socket + import time + port = 9000 + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(1) + sock, addr = s.accept() + while True: + time.sleep(9999999) + +Save the above code as server_coalesce.py, and run:: + + python3 server_coalesce.py + +On the client, save below code as client_coalesce.py:: + + import socket + server = 'nstat-b' + port = 9000 + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.connect((server, port)) + +Run:: + + nstatuser@nstat-a:~$ python3 -i client_coalesce.py + +We use '-i' to come into the interactive mode, then a packet:: + + >>> s.send(b'foo') + 3 + +Send a packet again:: + + >>> s.send(b'bar') + 3 + +On the server, run nstat:: + + ubuntu@nstat-b:~$ nstat + #kernel + IpInReceives 2 0.0 + IpInDelivers 2 0.0 + IpOutRequests 2 0.0 + TcpInSegs 2 0.0 + TcpOutSegs 2 0.0 + TcpExtTCPRcvCoalesce 1 0.0 + IpExtInOctets 110 0.0 + IpExtOutOctets 104 0.0 + IpExtInNoECTPkts 2 0.0 + +The client sent two packets, server didn't read any data. When +the second packet arrived at server, the first packet was still in +the receiving queue. So the TCP layer merged the two packets, and we +could find the TcpExtTCPRcvCoalesce increased 1. + +TcpExtListenOverflows and TcpExtListenDrops +---------------------------------------- +On server, run the nc command, listen on port 9000:: + + nstatuser@nstat-b:~$ nc -lkv 0.0.0.0 9000 + Listening on [0.0.0.0] (family 0, port 9000) + +On client, run 3 nc commands in different terminals:: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + +The nc command only accepts 1 connection, and the accept queue length +is 1. On current linux implementation, set queue length to n means the +actual queue length is n+1. Now we create 3 connections, 1 is accepted +by nc, 2 in accepted queue, so the accept queue is full. + +Before running the 4th nc, we clean the nstat history on the server:: + + nstatuser@nstat-b:~$ nstat -n + +Run the 4th nc on the client:: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + +If the nc server is running on kernel 4.10 or higher version, you +won't see the "Connection to ... succeeded!" string, because kernel +will drop the SYN if the accept queue is full. If the nc client is running +on an old kernel, you would see that the connection is succeeded, +because kernel would complete the 3 way handshake and keep the socket +on half open queue. I did the test on kernel 4.15. Below is the nstat +on the server:: + + nstatuser@nstat-b:~$ nstat + #kernel + IpInReceives 4 0.0 + IpInDelivers 4 0.0 + TcpInSegs 4 0.0 + TcpExtListenOverflows 4 0.0 + TcpExtListenDrops 4 0.0 + IpExtInOctets 240 0.0 + IpExtInNoECTPkts 4 0.0 + +Both TcpExtListenOverflows and TcpExtListenDrops were 4. If the time +between the 4th nc and the nstat was longer, the value of +TcpExtListenOverflows and TcpExtListenDrops would be larger, because +the SYN of the 4th nc was dropped, the client was retrying. + +IpInAddrErrors, IpExtInNoRoutes and IpOutNoRoutes +---------------------------------------------- +server A IP address: 192.168.122.250 +server B IP address: 192.168.122.251 +Prepare on server A, add a route to server B:: + + $ sudo ip route add 8.8.8.8/32 via 192.168.122.251 + +Prepare on server B, disable send_redirects for all interfaces:: + + $ sudo sysctl -w net.ipv4.conf.all.send_redirects=0 + $ sudo sysctl -w net.ipv4.conf.ens3.send_redirects=0 + $ sudo sysctl -w net.ipv4.conf.lo.send_redirects=0 + $ sudo sysctl -w net.ipv4.conf.default.send_redirects=0 + +We want to let sever A send a packet to 8.8.8.8, and route the packet +to server B. When server B receives such packet, it might send a ICMP +Redirect message to server A, set send_redirects to 0 will disable +this behavior. + +First, generate InAddrErrors. On server B, we disable IP forwarding:: + + $ sudo sysctl -w net.ipv4.conf.all.forwarding=0 + +On server A, we send packets to 8.8.8.8:: + + $ nc -v 8.8.8.8 53 + +On server B, we check the output of nstat:: + + $ nstat + #kernel + IpInReceives 3 0.0 + IpInAddrErrors 3 0.0 + IpExtInOctets 180 0.0 + IpExtInNoECTPkts 3 0.0 + +As we have let server A route 8.8.8.8 to server B, and we disabled IP +forwarding on server B, Server A sent packets to server B, then server B +dropped packets and increased IpInAddrErrors. As the nc command would +re-send the SYN packet if it didn't receive a SYN+ACK, we could find +multiple IpInAddrErrors. + +Second, generate IpExtInNoRoutes. On server B, we enable IP +forwarding:: + + $ sudo sysctl -w net.ipv4.conf.all.forwarding=1 + +Check the route table of server B and remove the default route:: + + $ ip route show + default via 192.168.122.1 dev ens3 proto static + 192.168.122.0/24 dev ens3 proto kernel scope link src 192.168.122.251 + $ sudo ip route delete default via 192.168.122.1 dev ens3 proto static + +On server A, we contact 8.8.8.8 again:: + + $ nc -v 8.8.8.8 53 + nc: connect to 8.8.8.8 port 53 (tcp) failed: Network is unreachable + +On server B, run nstat:: + + $ nstat + #kernel + IpInReceives 1 0.0 + IpOutRequests 1 0.0 + IcmpOutMsgs 1 0.0 + IcmpOutDestUnreachs 1 0.0 + IcmpMsgOutType3 1 0.0 + IpExtInNoRoutes 1 0.0 + IpExtInOctets 60 0.0 + IpExtOutOctets 88 0.0 + IpExtInNoECTPkts 1 0.0 + +We enabled IP forwarding on server B, when server B received a packet +which destination IP address is 8.8.8.8, server B will try to forward +this packet. We have deleted the default route, there was no route for +8.8.8.8, so server B increase IpExtInNoRoutes and sent the "ICMP +Destination Unreachable" message to server A. + +Third, generate IpOutNoRoutes. Run ping command on server B:: + + $ ping -c 1 8.8.8.8 + connect: Network is unreachable + +Run nstat on server B:: + + $ nstat + #kernel + IpOutNoRoutes 1 0.0 + +We have deleted the default route on server B. Server B couldn't find +a route for the 8.8.8.8 IP address, so server B increased +IpOutNoRoutes. diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index 8ff7b4c8f91b..a5f103b083a0 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -103,19 +103,33 @@ VRF device: or to specify the output device using cmsg and IP_PKTINFO. +By default the scope of the port bindings for unbound sockets is +limited to the default VRF. That is, it will not be matched by packets +arriving on interfaces enslaved to an l3mdev and processes may bind to +the same port if they bind to an l3mdev. + TCP & UDP services running in the default VRF context (ie., not bound to any VRF device) can work across all VRF domains by enabling the tcp_l3mdev_accept and udp_l3mdev_accept sysctl options: + sysctl -w net.ipv4.tcp_l3mdev_accept=1 sysctl -w net.ipv4.udp_l3mdev_accept=1 +These options are disabled by default so that a socket in a VRF is only +selected for packets in that VRF. There is a similar option for RAW +sockets, which is enabled by default for reasons of backwards compatibility. +This is so as to specify the output device with cmsg and IP_PKTINFO, but +using a socket not bound to the corresponding VRF. This allows e.g. older ping +implementations to be run with specifying the device but without executing it +in the VRF. This option can be disabled so that packets received in a VRF +context are only handled by a raw socket bound to the VRF, and packets in the +default VRF are only handled by a socket not bound to any VRF: + + sysctl -w net.ipv4.raw_l3mdev_accept=0 + netfilter rules on the VRF device can be used to limit access to services running in the default VRF context as well. -The default VRF does not have limited scope with respect to port bindings. -That is, if a process does a wildcard bind to a port in the default VRF it -owns the port across all VRF domains within the network namespace. - ################################################################################ Using iproute2 for VRFs diff --git a/Documentation/networking/xfrm_device.txt b/Documentation/networking/xfrm_device.txt index 267f55b5f54a..a1c904dc70dc 100644 --- a/Documentation/networking/xfrm_device.txt +++ b/Documentation/networking/xfrm_device.txt @@ -111,9 +111,10 @@ the stack in xfrm_input(). xfrm_state_hold(xs); store the state information into the skb - skb->sp = secpath_dup(skb->sp); - skb->sp->xvec[skb->sp->len++] = xs; - skb->sp->olen++; + sp = secpath_set(skb); + if (!sp) return; + sp->xvec[sp->len++] = xs; + sp->olen++; indicate the success and/or error status of the offload xo = xfrm_offload(skb); diff --git a/Documentation/nvdimm/security.txt b/Documentation/nvdimm/security.txt new file mode 100644 index 000000000000..4c36c05ca98e --- /dev/null +++ b/Documentation/nvdimm/security.txt @@ -0,0 +1,141 @@ +NVDIMM SECURITY +=============== + +1. Introduction +--------------- + +With the introduction of Intel Device Specific Methods (DSM) v1.8 +specification [1], security DSMs are introduced. The spec added the following +security DSMs: "get security state", "set passphrase", "disable passphrase", +"unlock unit", "freeze lock", "secure erase", and "overwrite". A security_ops +data structure has been added to struct dimm in order to support the security +operations and generic APIs are exposed to allow vendor neutral operations. + +2. Sysfs Interface +------------------ +The "security" sysfs attribute is provided in the nvdimm sysfs directory. For +example: +/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/security + +The "show" attribute of that attribute will display the security state for +that DIMM. The following states are available: disabled, unlocked, locked, +frozen, and overwrite. If security is not supported, the sysfs attribute +will not be visible. + +The "store" attribute takes several commands when it is being written to +in order to support some of the security functionalities: +update <old_keyid> <new_keyid> - enable or update passphrase. +disable <keyid> - disable enabled security and remove key. +freeze - freeze changing of security states. +erase <keyid> - delete existing user encryption key. +overwrite <keyid> - wipe the entire nvdimm. +master_update <keyid> <new_keyid> - enable or update master passphrase. +master_erase <keyid> - delete existing user encryption key. + +3. Key Management +----------------- + +The key is associated to the payload by the DIMM id. For example: +# cat /sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/nfit/id +8089-a2-1740-00000133 +The DIMM id would be provided along with the key payload (passphrase) to +the kernel. + +The security keys are managed on the basis of a single key per DIMM. The +key "passphrase" is expected to be 32bytes long. This is similar to the ATA +security specification [2]. A key is initially acquired via the request_key() +kernel API call during nvdimm unlock. It is up to the user to make sure that +all the keys are in the kernel user keyring for unlock. + +A nvdimm encrypted-key of format enc32 has the description format of: +nvdimm:<bus-provider-specific-unique-id> + +See file ``Documentation/security/keys/trusted-encrypted.rst`` for creating +encrypted-keys of enc32 format. TPM usage with a master trusted key is +preferred for sealing the encrypted-keys. + +4. Unlocking +------------ +When the DIMMs are being enumerated by the kernel, the kernel will attempt to +retrieve the key from the kernel user keyring. This is the only time +a locked DIMM can be unlocked. Once unlocked, the DIMM will remain unlocked +until reboot. Typically an entity (i.e. shell script) will inject all the +relevant encrypted-keys into the kernel user keyring during the initramfs phase. +This provides the unlock function access to all the related keys that contain +the passphrase for the respective nvdimms. It is also recommended that the +keys are injected before libnvdimm is loaded by modprobe. + +5. Update +--------- +When doing an update, it is expected that the existing key is removed from +the kernel user keyring and reinjected as different (old) key. It's irrelevant +what the key description is for the old key since we are only interested in the +keyid when doing the update operation. It is also expected that the new key +is injected with the description format described from earlier in this +document. The update command written to the sysfs attribute will be with +the format: +update <old keyid> <new keyid> + +If there is no old keyid due to a security enabling, then a 0 should be +passed in. + +6. Freeze +--------- +The freeze operation does not require any keys. The security config can be +frozen by a user with root privelege. + +7. Disable +---------- +The security disable command format is: +disable <keyid> + +An key with the current passphrase payload that is tied to the nvdimm should be +in the kernel user keyring. + +8. Secure Erase +--------------- +The command format for doing a secure erase is: +erase <keyid> + +An key with the current passphrase payload that is tied to the nvdimm should be +in the kernel user keyring. + +9. Overwrite +------------ +The command format for doing an overwrite is: +overwrite <keyid> + +Overwrite can be done without a key if security is not enabled. A key serial +of 0 can be passed in to indicate no key. + +The sysfs attribute "security" can be polled to wait on overwrite completion. +Overwrite can last tens of minutes or more depending on nvdimm size. + +An encrypted-key with the current user passphrase that is tied to the nvdimm +should be injected and its keyid should be passed in via sysfs. + +10. Master Update +----------------- +The command format for doing a master update is: +update <old keyid> <new keyid> + +The operating mechanism for master update is identical to update except the +master passphrase key is passed to the kernel. The master passphrase key +is just another encrypted-key. + +This command is only available when security is disabled. + +11. Master Erase +---------------- +The command format for doing a master erase is: +master_erase <current keyid> + +This command has the same operating mechanism as erase except the master +passphrase key is passed to the kernel. The master passphrase key is just +another encrypted-key. + +This command is only available when the master security is enabled, indicated +by the extended security status. + +[1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf +[2]: http://www.t13.org/documents/UploadedDocuments/docs2006/e05179r4-ACS-SecurityClarifications.pdf diff --git a/Documentation/perf/thunderx2-pmu.txt b/Documentation/perf/thunderx2-pmu.txt new file mode 100644 index 000000000000..dffc57143736 --- /dev/null +++ b/Documentation/perf/thunderx2-pmu.txt @@ -0,0 +1,41 @@ +Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE) +============================================================= + +The ThunderX2 SoC PMU consists of independent, system-wide, per-socket +PMUs such as the Level 3 Cache (L3C) and DDR4 Memory Controller (DMC). + +The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles. +Events are counted for the default channel (i.e. channel 0) and prorated +to the total number of channels/tiles. + +The DMC and L3C support up to 4 counters. Counters are independently +programmable and can be started and stopped individually. Each counter +can be set to a different event. Counters are 32-bit and do not support +an overflow interrupt; they are read every 2 seconds. + +PMU UNCORE (perf) driver: + +The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and +L3C devices. Each PMU can be used to count up to 4 events +simultaneously. The PMUs provide a description of their available events +and configuration options under sysfs, see +/sys/devices/uncore_<l3c_S/dmc_S/>; S is the socket id. + +The driver does not support sampling, therefore "perf record" will not +work. Per-task perf sessions are also not supported. + +Examples: + +# perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1 + +# perf stat -a -e \ +uncore_dmc_0/cnt_cycles/,\ +uncore_dmc_0/data_transfers/,\ +uncore_dmc_0/read_txns/,\ +uncore_dmc_0/write_txns/ sleep 1 + +# perf stat -a -e \ +uncore_l3c_0/read_request/,\ +uncore_l3c_0/read_hit/,\ +uncore_l3c_0/inv_request/,\ +uncore_l3c_0/inv_hit/ sleep 1 diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index 40ca2d6e2742..721b4739ec32 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -22,7 +22,7 @@ Nomenclature Some terms used in this document:- o Regulator - Electronic device that supplies power to other devices. - Most regulators can enable and disable their output whilst + Most regulators can enable and disable their output while some can control their output voltage and or current. Input Voltage -> Regulator -> Output Voltage diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.txt index bdd344aa18d9..18c5feef2577 100644 --- a/Documentation/powerpc/firmware-assisted-dump.txt +++ b/Documentation/powerpc/firmware-assisted-dump.txt @@ -113,7 +113,15 @@ header, is usually reserved at an offset greater than boot memory size (see Fig. 1). This area is *not* released: this region will be kept permanently reserved, so that it can act as a receptacle for a copy of the boot memory content in addition to CPU state -and HPTE region, in the case a crash does occur. +and HPTE region, in the case a crash does occur. Since this reserved +memory area is used only after the system crash, there is no point in +blocking this significant chunk of memory from production kernel. +Hence, the implementation uses the Linux kernel's Contiguous Memory +Allocator (CMA) for memory reservation if CMA is configured for kernel. +With CMA reservation this memory will be available for applications to +use it, while kernel is prevented from using it. With this fadump will +still be able to capture all of the kernel memory and most of the user +space memory except the user pages that were present in CMA region. o Memory Reservation during first kernel @@ -162,6 +170,9 @@ How to enable firmware-assisted dump (fadump): 1. Set config option CONFIG_FA_DUMP=y and build kernel. 2. Boot into linux kernel with 'fadump=on' kernel cmdline option. + By default, fadump reserved memory will be initialized as CMA area. + Alternatively, user can boot linux kernel with 'fadump=nocma' to + prevent fadump to use CMA. 3. Optionally, user can also set 'crashkernel=' kernel cmdline to specify size of the memory to reserve for boot memory dump preservation. @@ -172,6 +183,10 @@ NOTE: 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead 2. If firmware-assisted dump fails to reserve memory then it will fallback to existing kdump mechanism if 'crashkernel=' option is set at kernel cmdline. + 3. if user wants to capture all of user space memory and ok with + reserved memory not available to production system, then + 'fadump=nocma' kernel parameter can be used to fallback to + old behaviour. Sysfs/debugfs files: ------------ diff --git a/Documentation/powerpc/isa-versions.rst b/Documentation/powerpc/isa-versions.rst new file mode 100644 index 000000000000..812e20cc898c --- /dev/null +++ b/Documentation/powerpc/isa-versions.rst @@ -0,0 +1,74 @@ +CPU to ISA Version Mapping +========================== + +Mapping of some CPU versions to relevant ISA versions. + +========= ==================== +CPU Architecture version +========= ==================== +Power9 Power ISA v3.0B +Power8 Power ISA v2.07 +Power7 Power ISA v2.06 +Power6 Power ISA v2.05 +PA6T Power ISA v2.04 +Cell PPU - Power ISA v2.02 with some minor exceptions + - Plus Altivec/VMX ~= 2.03 +Power5++ Power ISA v2.04 (no VMX) +Power5+ Power ISA v2.03 +Power5 - PowerPC User Instruction Set Architecture Book I v2.02 + - PowerPC Virtual Environment Architecture Book II v2.02 + - PowerPC Operating Environment Architecture Book III v2.02 +PPC970 - PowerPC User Instruction Set Architecture Book I v2.01 + - PowerPC Virtual Environment Architecture Book II v2.01 + - PowerPC Operating Environment Architecture Book III v2.01 + - Plus Altivec/VMX ~= 2.03 +========= ==================== + + +Key Features +------------ + +========== ================== +CPU VMX (aka. Altivec) +========== ================== +Power9 Yes +Power8 Yes +Power7 Yes +Power6 Yes +PA6T Yes +Cell PPU Yes +Power5++ No +Power5+ No +Power5 No +PPC970 Yes +========== ================== + +========== ==== +CPU VSX +========== ==== +Power9 Yes +Power8 Yes +Power7 Yes +Power6 No +PA6T No +Cell PPU No +Power5++ No +Power5+ No +Power5 No +PPC970 No +========== ==== + +========== ==================== +CPU Transactional Memory +========== ==================== +Power9 Yes (* see transactional_memory.txt) +Power8 Yes +Power7 No +Power6 No +PA6T No +Cell PPU No +Power5++ No +Power5+ No +Power5 No +PPC970 No +========== ==================== diff --git a/Documentation/process/1.Intro.rst b/Documentation/process/1.Intro.rst index e782ae2eef58..c3d0270bbfb3 100644 --- a/Documentation/process/1.Intro.rst +++ b/Documentation/process/1.Intro.rst @@ -1,3 +1,5 @@ +.. _development_process_intro: + Introduction ============ diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst index eb4b185d168c..cfe264889447 100644 --- a/Documentation/process/4.Coding.rst +++ b/Documentation/process/4.Coding.rst @@ -315,7 +315,8 @@ variety of potential coding problems; it can also propose fixes for those problems. Quite a few "semantic patches" for the kernel have been packaged under the scripts/coccinelle directory; running "make coccicheck" will run through those semantic patches and report on any problems found. See -Documentation/dev-tools/coccinelle.rst for more information. +:ref:`Documentation/dev-tools/coccinelle.rst <devtools_coccinelle>` +for more information. Other kinds of portability errors are best found by compiling your code for other architectures. If you do not happen to have an S/390 system or a diff --git a/Documentation/process/5.Posting.rst b/Documentation/process/5.Posting.rst index c418c5d6cae4..4213e580f273 100644 --- a/Documentation/process/5.Posting.rst +++ b/Documentation/process/5.Posting.rst @@ -9,9 +9,10 @@ kernel. Unsurprisingly, the kernel development community has evolved a set of conventions and procedures which are used in the posting of patches; following them will make life much easier for everybody involved. This document will attempt to cover these expectations in reasonable detail; -more information can also be found in the files process/submitting-patches.rst, -process/submitting-drivers.rst, and process/submit-checklist.rst in the kernel -documentation directory. +more information can also be found in the files +:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`, +:ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>` +and :ref:`Documentation/process/submit-checklist.rst <submitchecklist>`. When to post @@ -198,8 +199,10 @@ pass it to diff with the "-X" option. The tags mentioned above are used to describe how various developers have been associated with the development of this patch. They are described in -detail in the process/submitting-patches.rst document; what follows here is a -brief summary. Each of these lines has the format: +detail in +the :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` +document; what follows here is a brief summary. Each of these lines has +the format: :: @@ -210,8 +213,8 @@ The tags in common use are: - Signed-off-by: this is a developer's certification that he or she has the right to submit the patch for inclusion into the kernel. It is an agreement to the Developer's Certificate of Origin, the full text of - which can be found in Documentation/process/submitting-patches.rst. Code - without a proper signoff cannot be merged into the mainline. + which can be found in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` + Code without a proper signoff cannot be merged into the mainline. - Co-developed-by: states that the patch was also created by another developer along with the original author. This is useful at times when multiple @@ -226,7 +229,7 @@ The tags in common use are: it to work. - Reviewed-by: the named developer has reviewed the patch for correctness; - see the reviewer's statement in Documentation/process/submitting-patches.rst + see the reviewer's statement in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` for more detail. - Reported-by: names a user who reported a problem which is fixed by this @@ -253,8 +256,8 @@ take care of: be examined in any detail. If there is any doubt at all, mail the patch to yourself and convince yourself that it shows up intact. - Documentation/process/email-clients.rst has some helpful hints on making - specific mail clients work for sending patches. + :ref:`Documentation/process/email-clients.rst <email_clients>` has some + helpful hints on making specific mail clients work for sending patches. - Are you sure your patch is free of silly mistakes? You should always run patches through scripts/checkpatch.pl and address the complaints it diff --git a/Documentation/process/8.Conclusion.rst b/Documentation/process/8.Conclusion.rst index 1c7f54cd0261..8395aa2c1f3a 100644 --- a/Documentation/process/8.Conclusion.rst +++ b/Documentation/process/8.Conclusion.rst @@ -5,9 +5,10 @@ For more information There are numerous sources of information on Linux kernel development and related topics. First among those will always be the Documentation -directory found in the kernel source distribution. The top-level process/howto.rst -file is an important starting point; process/submitting-patches.rst and -process/submitting-drivers.rst are also something which all kernel developers should +directory found in the kernel source distribution. The top-level :ref:`process/howto.rst <process_howto>` +file is an important starting point; :ref:`process/submitting-patches.rst <submittingpatches>` +and :ref:`process/submitting-drivers.rst <submittingdrivers>` +are also something which all kernel developers should read. Many internal kernel APIs are documented using the kerneldoc mechanism; "make htmldocs" or "make pdfdocs" can be used to generate those documents in HTML or PDF format (though the version of TeX shipped by some diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst index 88a7d5c8bb2f..1c3a840d06b9 100644 --- a/Documentation/process/adding-syscalls.rst +++ b/Documentation/process/adding-syscalls.rst @@ -1,3 +1,6 @@ + +.. _addsyscalls: + Adding a New System Call ======================== diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index d1bf143b446f..18735dc460a0 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -326,7 +326,7 @@ Kernel documentation Sphinx ------ -Please see :ref:`sphinx_install` in ``Documentation/doc-guide/sphinx.rst`` +Please see :ref:`sphinx_install` in :ref:`Documentation/doc-guide/sphinx.rst <sphinxdoc>` for details about Sphinx requirements. Getting updated software diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index 4e7c0a1c427a..277c113376a6 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -1075,5 +1075,5 @@ gcc internals and indent, all available from http://www.gnu.org/manual/ WG14 is the international standardization working group for the programming language C, URL: http://www.open-std.org/JTC1/SC22/WG14/ -Kernel process/coding-style.rst, by greg@kroah.com at OLS 2002: +Kernel :ref:`process/coding-style.rst <codingstyle>`, by greg@kroah.com at OLS 2002: http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/ diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst index dcb25f94188e..58b2f46c4f98 100644 --- a/Documentation/process/howto.rst +++ b/Documentation/process/howto.rst @@ -1,3 +1,5 @@ +.. _process_howto: + HOWTO do Linux kernel development ================================= @@ -296,9 +298,9 @@ two weeks, but it can be longer if there are no pressing problems. A security-related problem, instead, can cause a release to happen almost instantly. -The file Documentation/process/stable-kernel-rules.rst in the kernel tree -documents what kinds of changes are acceptable for the -stable tree, and -how the release process works. +The file :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` +in the kernel tree documents what kinds of changes are acceptable for +the -stable tree, and how the release process works. 4.x -git patches ~~~~~~~~~~~~~~~~ @@ -358,7 +360,8 @@ tool. For details on how to use the kernel bugzilla, please see: https://bugzilla.kernel.org/page.cgi?id=faq.html -The file admin-guide/reporting-bugs.rst in the main kernel source directory has a good +The file :ref:`admin-guide/reporting-bugs.rst <reportingbugs>` +in the main kernel source directory has a good template for how to report a possible kernel bug, and details what kind of information is needed by the kernel developers to help track down the problem. @@ -424,7 +427,7 @@ add your statements between the individual quoted sections instead of writing at the top of the mail. If you add patches to your mail, make sure they are plain readable text -as stated in Documentation/process/submitting-patches.rst. +as stated in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`. Kernel developers don't want to deal with attachments or compressed patches; they may want to comment on individual lines of your patch, which works only that way. Make sure you diff --git a/Documentation/process/kernel-driver-statement.rst b/Documentation/process/kernel-driver-statement.rst index e78452c2164c..a849790a68bc 100644 --- a/Documentation/process/kernel-driver-statement.rst +++ b/Documentation/process/kernel-driver-statement.rst @@ -1,3 +1,5 @@ +.. _process_statement_driver: + Kernel Driver Statement ----------------------- diff --git a/Documentation/process/kernel-enforcement-statement.rst b/Documentation/process/kernel-enforcement-statement.rst index 6816c12d6956..e5a1be476047 100644 --- a/Documentation/process/kernel-enforcement-statement.rst +++ b/Documentation/process/kernel-enforcement-statement.rst @@ -1,4 +1,6 @@ -Linux Kernel Enforcement Statement +.. _process_statement_kernel: + +Linux Kernel Enforcement Statement ---------------------------------- As developers of the Linux kernel, we have a keen interest in how our software diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst index 633be1043690..547bbf28e615 100644 --- a/Documentation/process/magic-number.rst +++ b/Documentation/process/magic-number.rst @@ -1,3 +1,5 @@ +.. _magicnumbers: + Linux magic numbers =================== diff --git a/Documentation/process/management-style.rst b/Documentation/process/management-style.rst index 85ef8ca8f639..186753ff3d2d 100644 --- a/Documentation/process/management-style.rst +++ b/Documentation/process/management-style.rst @@ -5,8 +5,9 @@ Linux kernel management style This is a short document describing the preferred (or made up, depending on who you ask) management style for the linux kernel. It's meant to -mirror the process/coding-style.rst document to some degree, and mainly written to -avoid answering [#f1]_ the same (or similar) questions over and over again. +mirror the :ref:`process/coding-style.rst <codingstyle>` document to some +degree, and mainly written to avoid answering [#f1]_ the same (or similar) +questions over and over again. Management style is very personal and much harder to quantify than simple coding style rules, so this document may or may not have anything diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst index b38bf2054ce3..58bc047e7b95 100644 --- a/Documentation/process/submitting-drivers.rst +++ b/Documentation/process/submitting-drivers.rst @@ -16,7 +16,8 @@ you should probably talk to XFree86 (http://www.xfree86.org/) and/or X.Org Oh, and we don't really recommend submitting changes to XFree86 :) -Also read the Documentation/process/submitting-patches.rst document. +Also read the :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` +document. Allocating Device Numbers @@ -27,7 +28,8 @@ by the Linux assigned name and number authority (currently this is Torben Mathiasen). The site is http://www.lanana.org/. This also deals with allocating numbers for devices that are not going to be submitted to the mainstream kernel. -See Documentation/admin-guide/devices.rst for more information on this. +See :ref:`Documentation/admin-guide/devices.rst <admin_devices>` +for more information on this. If you don't use assigned numbers then when your device is submitted it will be given an assigned number even if that is different from values you may @@ -117,7 +119,7 @@ PM support: anything. For the driver testing instructions see Documentation/power/drivers-testing.txt and for a relatively complete overview of the power management issues related to - drivers see Documentation/driver-api/pm/devices.rst. + drivers see :ref:`Documentation/driver-api/pm/devices.rst <driverapi_pm_devices>`. Control: In general if there is active maintenance of a driver by diff --git a/Documentation/s390/3270.ChangeLog b/Documentation/s390/3270.ChangeLog index 031c36081946..ecaf60b6c381 100644 --- a/Documentation/s390/3270.ChangeLog +++ b/Documentation/s390/3270.ChangeLog @@ -16,7 +16,7 @@ Sep 2002: Dynamically get 3270 input buffer Sep 2002: Fix tubfs kmalloc()s * Do read and write lengths correctly in fs3270_read() - and fs3270_write(), whilst never asking kmalloc() + and fs3270_write(), while never asking kmalloc() for more than 0x800 bytes. Affects tubfs.c and tubio.h. Sep 2002: Recognize 3270 control unit type 3174 diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 92999d4e0cb8..25a4b4cf04a6 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -97,11 +97,6 @@ parameters may be changed at runtime by the command allowing boot to proceed. none ignores them, expecting user space to do the scan. - scsi_mod.use_blk_mq= - [SCSI] use blk-mq I/O path by default - See SCSI_MQ_DEFAULT in drivers/scsi/Kconfig. - Format: <y/n> - sim710= [SCSI,HW] See header of drivers/scsi/sim710.c. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 177c031763c0..c1dd4939f4ae 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -1098,8 +1098,6 @@ of interest: unchecked_isa_dma - 1=>only use bottom 16 MB of ram (ISA DMA addressing restriction), 0=>can use full 32 bit (or better) DMA address space - use_clustering - 1=>SCSI commands in mid level's queue can be merged, - 0=>disallow SCSI command merging no_async_abort - 1=>Asynchronous aborts are not supported 0=>Timed-out commands will be aborted asynchronously hostt - pointer to driver's struct scsi_host_template from which diff --git a/Documentation/security/credentials.rst b/Documentation/security/credentials.rst index 5bb7125faeee..282e79feee6a 100644 --- a/Documentation/security/credentials.rst +++ b/Documentation/security/credentials.rst @@ -291,7 +291,7 @@ for example), it must be considered immutable, barring two exceptions: 1. The reference count may be altered. - 2. Whilst the keyring subscriptions of a set of credentials may not be + 2. While the keyring subscriptions of a set of credentials may not be changed, the keyrings subscribed to may have their contents altered. To catch accidental credential alteration at compile time, struct task_struct @@ -358,7 +358,7 @@ Once a reference has been obtained, it must be released with ``put_cred()``, Accessing Another Task's Credentials ------------------------------------ -Whilst a task may access its own credentials without the need for locking, the +While a task may access its own credentials without the need for locking, the same is not true of a task wanting to access another task's credentials. It must use the RCU read lock and ``rcu_dereference()``. @@ -382,7 +382,7 @@ This should be used inside the RCU read lock, as in the following example:: } Should it be necessary to hold another task's credentials for a long period of -time, and possibly to sleep whilst doing so, then the caller should get a +time, and possibly to sleep while doing so, then the caller should get a reference on them using:: const struct cred *get_task_cred(struct task_struct *task); @@ -442,7 +442,7 @@ duplicate of the current process's credentials, returning with the mutex still held if successful. It returns NULL if not successful (out of memory). The mutex prevents ``ptrace()`` from altering the ptrace state of a process -whilst security checks on credentials construction and changing is taking place +while security checks on credentials construction and changing is taking place as the ptrace state may alter the outcome, particularly in the case of ``execve()``. diff --git a/Documentation/security/keys/request-key.rst b/Documentation/security/keys/request-key.rst index 21e27238cec6..600ad67d1707 100644 --- a/Documentation/security/keys/request-key.rst +++ b/Documentation/security/keys/request-key.rst @@ -132,7 +132,7 @@ Negative Instantiation And Rejection Rather than instantiating a key, it is possible for the possessor of an authorisation key to negatively instantiate a key that's under construction. This is a short duration placeholder that causes any attempt at re-requesting -the key whilst it exists to fail with error ENOKEY if negated or the specified +the key while it exists to fail with error ENOKEY if negated or the specified error if rejected. This is provided to prevent excessive repeated spawning of /sbin/request-key diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst index 3bb24e09a332..e8a1c35cd277 100644 --- a/Documentation/security/keys/trusted-encrypted.rst +++ b/Documentation/security/keys/trusted-encrypted.rst @@ -76,7 +76,7 @@ Usage:: Where:: - format:= 'default | ecryptfs' + format:= 'default | ecryptfs | enc32' key-type:= 'trusted' | 'user' @@ -173,3 +173,7 @@ are anticipated. In particular the new format 'ecryptfs' has been defined in in order to use encrypted keys to mount an eCryptfs filesystem. More details about the usage can be found in the file ``Documentation/security/keys/ecryptfs.rst``. + +Another new format 'enc32' has been defined in order to support encrypted keys +with payload size of 32 bytes. This will initially be used for nvdimm security +but may expand to other usages that require 32 bytes payload. diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 389fcd4759e9..ce0c1a9b8aab 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt @@ -75,7 +75,7 @@ /* Set rts delay after send, if needed: */ rs485conf.delay_rts_after_send = ...; - /* Set this flag if you want to receive data even whilst sending data */ + /* Set this flag if you want to receive data even while sending data */ rs485conf.flags |= SER_RS485_RX_DURING_TX; if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) { diff --git a/Documentation/sh/new-machine.txt b/Documentation/sh/new-machine.txt index f0354164cb0e..e0961a66130b 100644 --- a/Documentation/sh/new-machine.txt +++ b/Documentation/sh/new-machine.txt @@ -116,7 +116,6 @@ might look something like: * arch/sh/boards/vapor/setup.c - Setup code for imaginary board */ #include <linux/init.h> -#include <asm/rtc.h> /* for board_time_init() */ const char *get_system_type(void) { @@ -132,13 +131,6 @@ int __init platform_setup(void) * this board. */ - /* - * Presume all FooTech boards have the same broken timer, - * and also presume that we've defined foo_timer_init to - * do something useful. - */ - board_time_init = foo_timer_init; - /* Start-up imaginary PCI ... */ /* And whatever else ... */ diff --git a/Documentation/sound/soc/dai.rst b/Documentation/sound/soc/dai.rst index 55820e51708f..2e99183a7a47 100644 --- a/Documentation/sound/soc/dai.rst +++ b/Documentation/sound/soc/dai.rst @@ -24,7 +24,7 @@ I2S === I2S is a common 4 wire DAI used in HiFi, STB and portable devices. The Tx and -Rx lines are used for audio transmission, whilst the bit clock (BCLK) and +Rx lines are used for audio transmission, while the bit clock (BCLK) and left/right clock (LRC) synchronise the link. I2S is flexible in that either the controller or CODEC can drive (master) the BCLK and LRC clock lines. Bit clock usually varies depending on the sample rate and the master system clock @@ -49,9 +49,9 @@ PCM PCM is another 4 wire interface, very similar to I2S, which can support a more flexible protocol. It has bit clock (BCLK) and sync (SYNC) lines that are used -to synchronise the link whilst the Tx and Rx lines are used to transmit and +to synchronise the link while the Tx and Rx lines are used to transmit and receive the audio data. Bit clock usually varies depending on sample rate -whilst sync runs at the sample rate. PCM also supports Time Division +while sync runs at the sample rate. PCM also supports Time Division Multiplexing (TDM) in that several devices can use the bus simultaneously (this is sometimes referred to as network mode). diff --git a/Documentation/sound/soc/dpcm.rst b/Documentation/sound/soc/dpcm.rst index fe61e02277f8..f6845b2278ea 100644 --- a/Documentation/sound/soc/dpcm.rst +++ b/Documentation/sound/soc/dpcm.rst @@ -218,7 +218,7 @@ like a BT phone call :- * * <----DAI5-----> FM ************* -This allows the host CPU to sleep whilst the DSP, MODEM DAI and the BT DAI are +This allows the host CPU to sleep while the DSP, MODEM DAI and the BT DAI are still in operation. A BE DAI link can also set the codec to a dummy device if the code is a device diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt index ab16efe0c79d..d68135560895 100644 --- a/Documentation/static-keys.txt +++ b/Documentation/static-keys.txt @@ -156,7 +156,7 @@ or increment/decrement function. Note that switching branches results in some locks being taken, particularly the CPU hotplug lock (in order to avoid races against -CPUs being brought in the kernel whilst the kernel is getting +CPUs being brought in the kernel while the kernel is getting patched). Calling the static key API from within a hotplug notifier is thus a sure deadlock recipe. In order to still allow use of the functionnality, the following functions are provided: diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 7d73882e2c27..187ce4f599a2 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -63,6 +63,7 @@ Currently, these files are in /proc/sys/vm: - swappiness - user_reserve_kbytes - vfs_cache_pressure +- watermark_boost_factor - watermark_scale_factor - zone_reclaim_mode @@ -856,6 +857,26 @@ ten times more freeable objects than there are. ============================================================= +watermark_boost_factor: + +This factor controls the level of reclaim when memory is being fragmented. +It defines the percentage of the high watermark of a zone that will be +reclaimed if pages of different mobility are being mixed within pageblocks. +The intent is that compaction has less work to do in the future and to +increase the success rate of future high-order allocations such as SLUB +allocations, THP and hugetlbfs pages. + +To make it sensible with respect to the watermark_scale_factor parameter, +the unit is in fractions of 10,000. The default value of 15,000 means +that up to 150% of the high watermark will be reclaimed in the event of +a pageblock being mixed due to fragmentation. The level of reclaim is +determined by the number of fragmentation events that occurred in the +recent past. If this value is smaller than a pageblock then a pageblocks +worth of pages will be reclaimed (e.g. 2MB on 64-bit x86). A boost factor +of 0 will disable the feature. + +============================================================= + watermark_scale_factor: This factor controls the aggressiveness of kswapd. It defines the diff --git a/Documentation/thermal/power_allocator.txt b/Documentation/thermal/power_allocator.txt index a1ce2235f121..9fb0ff06dca9 100644 --- a/Documentation/thermal/power_allocator.txt +++ b/Documentation/thermal/power_allocator.txt @@ -110,7 +110,7 @@ the permitted thermal "ramp" of the system. For instance, a lower `k_pu` value will provide a slower ramp, at the cost of capping available capacity at a low temperature. On the other hand, a high value of `k_pu` will result in the governor granting very high power -whilst temperature is low, and may lead to temperature overshooting. +while temperature is low, and may lead to temperature overshooting. The default value for `k_pu` is: diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index f82434f2795e..0131df7f5968 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -24,13 +24,13 @@ It can be used for debugging or analyzing latencies and performance issues that take place outside of user-space. Although ftrace is typically considered the function tracer, it -is really a frame work of several assorted tracing utilities. +is really a framework of several assorted tracing utilities. There's latency tracing to examine what occurs between interrupts disabled and enabled, as well as for preemption and from a time a task is woken to the task is actually scheduled in. One of the most common uses of ftrace is the event tracing. -Through out the kernel is hundreds of static event points that +Throughout the kernel is hundreds of static event points that can be enabled via the tracefs file system to see what is going on in certain parts of the kernel. @@ -462,7 +462,7 @@ of ftrace. Here is a list of some of the key files: mono_raw: This is the raw monotonic clock (CLOCK_MONOTONIC_RAW) - which is montonic but is not subject to any rate adjustments + which is monotonic but is not subject to any rate adjustments and ticks at the same rate as the hardware clocksource. boot: @@ -914,8 +914,8 @@ The above is mostly meaningful for kernel developers. current trace and the next trace. - '$' - greater than 1 second - - '@' - greater than 100 milisecond - - '*' - greater than 10 milisecond + - '@' - greater than 100 millisecond + - '*' - greater than 10 millisecond - '#' - greater than 1000 microsecond - '!' - greater than 100 microsecond - '+' - greater than 10 microsecond @@ -2541,7 +2541,7 @@ At compile time every C file object is run through the recordmcount program (located in the scripts directory). This program will parse the ELF headers in the C object to find all the locations in the .text section that call mcount. Starting -with gcc verson 4.6, the -mfentry has been added for x86, which +with gcc version 4.6, the -mfentry has been added for x86, which calls "__fentry__" instead of "mcount". Which is called before the creation of the stack frame. @@ -2978,7 +2978,7 @@ The following commands are supported: When the function is hit, it will dump the contents of the ftrace ring buffer to the console. This is useful if you need to debug something, and want to dump the trace when a certain function - is hit. Perhaps its a function that is called before a tripple + is hit. Perhaps it's a function that is called before a triple fault happens and does not allow you to get a regular dump. - cpudump: diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst index 306997941ba1..6b4107cf4b98 100644 --- a/Documentation/trace/index.rst +++ b/Documentation/trace/index.rst @@ -22,3 +22,4 @@ Linux Tracing Technologies hwlat_detector intel_th stm + sys-t diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst index 47e765c2f2c3..235ce2ab131a 100644 --- a/Documentation/trace/kprobetrace.rst +++ b/Documentation/trace/kprobetrace.rst @@ -20,6 +20,9 @@ current_tracer. Instead of that, add probe points via /sys/kernel/debug/tracing/kprobe_events, and enable it via /sys/kernel/debug/tracing/events/kprobes/<EVENT>/enable. +You can also use /sys/kernel/debug/tracing/dynamic_events instead of +kprobe_events. That interface will provide unified access to other +dynamic events too. Synopsis of kprobe_events ------------------------- diff --git a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst index d0822811527a..4c3bfde2ba47 100644 --- a/Documentation/trace/uprobetracer.rst +++ b/Documentation/trace/uprobetracer.rst @@ -18,6 +18,10 @@ current_tracer. Instead of that, add probe points via However unlike kprobe-event tracer, the uprobe event interface expects the user to calculate the offset of the probepoint in the object. +You can also use /sys/kernel/debug/tracing/dynamic_events instead of +uprobe_events. That interface will provide unified access to other +dynamic events too. + Synopsis of uprobe_tracer ------------------------- :: diff --git a/Documentation/translations/it_IT/admin-guide/README.rst b/Documentation/translations/it_IT/admin-guide/README.rst new file mode 100644 index 000000000000..80f5ffc94a9e --- /dev/null +++ b/Documentation/translations/it_IT/admin-guide/README.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/admin-guide/README.rst <readme>` + +.. _it_readme: + +Rilascio del kernel Linux 4.x <http://kernel.org/> +=================================================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/admin-guide/security-bugs.rst b/Documentation/translations/it_IT/admin-guide/security-bugs.rst new file mode 100644 index 000000000000..18a5822c7d9a --- /dev/null +++ b/Documentation/translations/it_IT/admin-guide/security-bugs.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>` + +.. _it_securitybugs: + +Bachi di sicurezza +================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/doc-guide/kernel-doc.rst b/Documentation/translations/it_IT/doc-guide/kernel-doc.rst index 2bf1c1e2f394..a4ecd8f27631 100644 --- a/Documentation/translations/it_IT/doc-guide/kernel-doc.rst +++ b/Documentation/translations/it_IT/doc-guide/kernel-doc.rst @@ -107,7 +107,7 @@ macro simil-funzioni è il seguente:: * Context: Describes whether the function can sleep, what locks it takes, * releases, or expects to be held. It can extend over multiple * lines. - * Return: Describe the return value of foobar. + * Return: Describe the return value of function_name. * * The return value description can also have multiple paragraphs, and should * be placed at the end of the comment block. diff --git a/Documentation/translations/it_IT/index.rst b/Documentation/translations/it_IT/index.rst index 898a7823a6f4..ea9b2916b3e4 100644 --- a/Documentation/translations/it_IT/index.rst +++ b/Documentation/translations/it_IT/index.rst @@ -86,6 +86,7 @@ vostre modifiche molto più semplice .. toctree:: :maxdepth: 2 + process/index doc-guide/index kernel-hacking/index diff --git a/Documentation/translations/it_IT/kernel-hacking/locking.rst b/Documentation/translations/it_IT/kernel-hacking/locking.rst index 753643622c23..0ef31666663b 100644 --- a/Documentation/translations/it_IT/kernel-hacking/locking.rst +++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst @@ -593,8 +593,8 @@ l'opzione ``GFP_KERNEL`` che è permessa solo in contesto utente. Ho supposto che :c:func:`cache_add()` venga chiamata dal contesto utente, altrimenti questa opzione deve diventare un parametro di :c:func:`cache_add()`. -Exposing Objects Outside This File ----------------------------------- +Esporre gli oggetti al di fuori del file +---------------------------------------- Se i vostri oggetti contengono più informazioni, potrebbe non essere sufficiente copiare i dati avanti e indietro: per esempio, altre parti del diff --git a/Documentation/translations/it_IT/process/1.Intro.rst b/Documentation/translations/it_IT/process/1.Intro.rst new file mode 100644 index 000000000000..c1be6dc398a7 --- /dev/null +++ b/Documentation/translations/it_IT/process/1.Intro.rst @@ -0,0 +1,297 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/1.Intro.rst <development_process_intro>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_development_intro: + +Introduzione +============ + +Riepilogo generale +------------------ + +Il resto di questa sezione riguarda il processo di sviluppo del kernel e +quella sorta di frustrazione che gli sviluppatori e i loro datori di lavoro +potrebbero dover affrontare. Ci sono molte ragioni per le quali del codice +per il kernel debba essere incorporato nel kernel ufficiale, fra le quali: +disponibilità immediata agli utilizzatori, supporto della comunità in +differenti modalità, e la capacità di influenzare la direzione dello sviluppo +del kernel. +Il codice che contribuisce al kernel Linux deve essere reso disponibile sotto +una licenza GPL-compatibile. + +La sezione :ref:`it_development_process` introduce il processo di sviluppo, +il ciclo di rilascio del kernel, ed i meccanismi della finestra +d'incorporazione. Il capitolo copre le varie fasi di una modifica: sviluppo, +revisione e ciclo d'incorporazione. Ci sono alcuni dibattiti su strumenti e +liste di discussione. Gli sviluppatori che sono in attesa di poter sviluppare +qualcosa per il kernel sono invitati ad individuare e sistemare bachi come +esercizio iniziale. + +La sezione :ref:`it_development_early_stage` copre i primi stadi della +pianificazione di un progetto di sviluppo, con particolare enfasi sul +coinvolgimento della comunità, il prima possibile. + +La sezione :ref:`it_development_coding` riguarda il processo di scrittura +del codice. Qui, sono esposte le diverse insidie che sono state già affrontate +da altri sviluppatori. Il capitolo copre anche alcuni dei requisiti per le +modifiche, ed esiste un'introduzione ad alcuni strumenti che possono aiutarvi +nell'assicurarvi che le modifiche per il kernel siano corrette. + +La sezione :ref:`it_development_posting` parla del processo di pubblicazione +delle modifiche per la revisione. Per essere prese in considerazione dalla +comunità di sviluppo, le modifiche devono essere propriamente formattate ed +esposte, e devono essere inviate nel posto giusto. Seguire i consigli presenti +in questa sezione dovrebbe essere d'aiuto nell'assicurare la migliore +accoglienza possibile del vostro lavoro. + +La sezione :ref:`it_development_followthrough` copre ciò che accade dopo +la pubblicazione delle modifiche; a questo punto il lavoro è lontano +dall'essere concluso. Lavorare con i revisori è una parte cruciale del +processo di sviluppo; questa sezione offre una serie di consigli su come +evitare problemi in questa importante fase. Gli sviluppatori sono diffidenti +nell'affermare che il lavoro è concluso quando una modifica è incorporata nei +sorgenti principali. + +La sezione :ref:`it_development_advancedtopics` introduce un paio di argomenti +"avanzati": gestire le modifiche con git e controllare le modifiche pubblicate +da altri. + +La sezione :ref:`it_development_conclusion` chiude il documento con dei +riferimenti ad altre fonti che forniscono ulteriori informazioni sullo sviluppo +del kernel. + +Di cosa parla questo documento +------------------------------ + +Il kernel Linux, ha oltre 8 milioni di linee di codice e ben oltre 1000 +contributori ad ogni rilascio; è uno dei più vasti e più attivi software +liberi progettati mai esistiti. Sin dal sul modesto inizio nel 1991, +questo kernel si è evoluto nel miglior componente per sistemi operativi +che fanno funzionare piccoli riproduttori musicali, PC, grandi super computer +e tutte le altre tipologie di sistemi fra questi estremi. È una soluzione +robusta, efficiente ed adattabile a praticamente qualsiasi situazione. + +Con la crescita di Linux è arrivato anche un aumento di sviluppatori +(ed aziende) desiderosi di partecipare a questo sviluppo. I produttori di +hardware vogliono assicurarsi che il loro prodotti siano supportati da Linux, +rendendo questi prodotti attrattivi agli utenti Linux. I produttori di +sistemi integrati, che usano Linux come componente di un prodotto integrato, +vogliono che Linux sia capace ed adeguato agli obiettivi ed il più possibile +alla mano. Fornitori ed altri produttori di software che basano i propri +prodotti su Linux hanno un chiaro interesse verso capacità, prestazioni ed +affidabilità del kernel Linux. E gli utenti finali, anche, spesso vorrebbero +cambiare Linux per renderlo più aderente alle proprie necessità. + +Una delle caratteristiche più coinvolgenti di Linux è quella dell'accessibilità +per gli sviluppatori; chiunque con le capacità richieste può migliorare +Linux ed influenzarne la direzione di sviluppo. Prodotti non open-source non +possono offrire questo tipo di apertura, che è una caratteristica del software +libero. Ma, anzi, il kernel è persino più aperto rispetto a molti altri +progetti di software libero. Un classico ciclo di sviluppo trimestrale può +coinvolgere 1000 sviluppatori che lavorano per più di 100 differenti aziende +(o per nessuna azienda). + +Lavorare con la comunità di sviluppo del kernel non è particolarmente +difficile. Ma, ciononostante, diversi potenziali contributori hanno trovato +delle difficoltà quando hanno cercato di lavorare sul kernel. La comunità del +kernel utilizza un proprio modo di operare che gli permette di funzionare +agevolmente (e genera un prodotto di alta qualità) in un ambiente dove migliaia +di stringhe di codice sono modificate ogni giorni. Quindi non deve sorprendere +che il processo di sviluppo del kernel differisca notevolmente dai metodi di +sviluppo privati. + +Il processo di sviluppo del Kernel può, dall'altro lato, risultare +intimidatorio e strano ai nuovi sviluppatori, ma ha dietro di se buone ragioni +e solide esperienze. Uno sviluppatore che non comprende i modi della comunità +del kernel (o, peggio, che cerchi di aggirarli o violarli) avrà un'esperienza +deludente nel proprio bagaglio. La comunità di sviluppo, sebbene sia utile +a coloro che cercano di imparare, ha poco tempo da dedicare a coloro che non +ascoltano o coloro che non sono interessati al processo di sviluppo. + +Si spera che coloro che leggono questo documento saranno in grado di evitare +queste esperienze spiacevoli. C'è molto materiale qui, ma lo sforzo della +lettura sarà ripagato in breve tempo. La comunità di sviluppo ha sempre +bisogno di sviluppatori che vogliano aiutare a rendere il kernel migliore; +il testo seguente potrebbe esservi d'aiuto - o essere d'aiuto ai vostri +collaboratori- per entrare a far parte della nostra comunità. + +Crediti +------- + +Questo documento è stato scritto da Jonathan Corbet, corbet@lwn.net. +È stato migliorato da Johannes Berg, James Berry, Alex Chiang, Roland +Dreier, Randy Dunlap, Jake Edge, Jiri Kosina, Matt Mackall, Arthur Marsh, +Amanda McPherson, Andrew Morton, Andrew Price, Tsugikazu Shibata e Jochen Voß. + +Questo lavoro è stato supportato dalla Linux Foundation; un ringraziamento +speciale ad Amanda McPherson, che ha visto il valore di questo lavoro e lo ha +reso possibile. + +L'importanza d'avere il codice nei sorgenti principali +------------------------------------------------------ + +Alcune aziende e sviluppatori ogni tanto si domandano perché dovrebbero +preoccuparsi di apprendere come lavorare con la comunità del kernel e di +inserire il loro codice nel ramo di sviluppo principale (per ramo principale +s'intende quello mantenuto da Linus Torvalds e usato come base dai +distributori Linux). Nel breve termine, contribuire al codice può sembrare +un costo inutile; può sembra più facile tenere separato il proprio codice e +supportare direttamente i suoi utilizzatori. La verità è che il tenere il +codice separato ("fuori dai sorgenti", *"out-of-tree"*) è un falso risparmio. + +Per dimostrare i costi di un codice "fuori dai sorgenti", eccovi +alcuni aspetti rilevanti del processo di sviluppo kernel; la maggior parte +di essi saranno approfonditi dettagliatamente più avanti in questo documento. +Considerate: + +- Il codice che è stato inserito nel ramo principale del kernel è disponibile + a tutti gli utilizzatori Linux. Sarà automaticamente presente in tutte le + distribuzioni che lo consentono. Non c'è bisogno di: driver per dischi, + scaricare file, o della scocciatura del dover supportare diverse versioni di + diverse distribuzioni; funziona già tutto, per gli sviluppatori e per gli + utilizzatori. L'inserimento nel ramo principale risolve un gran numero di + problemi di distribuzione e di supporto. + +- Nonostante gli sviluppatori kernel si sforzino di tenere stabile + l'interfaccia dello spazio utente, quella interna al kernel è in continuo + cambiamento. La mancanza di un'interfaccia interna è deliberatamente una + decisione di progettazione; ciò permette che i miglioramenti fondamentali + vengano fatti in un qualsiasi momento e che risultino fatti con un codice di + alta qualità. Ma una delle conseguenze di questa politica è che qualsiasi + codice "fuori dai sorgenti" richiede costante manutenzione per renderlo + funzionante coi kernel più recenti. Tenere un codice "fuori dai sorgenti" + richiede una mole di lavoro significativa solo per farlo funzionare. + + Invece, il codice che si trova nel ramo principale non necessita di questo + tipo di lavoro poiché ad ogni sviluppatore che faccia una modifica alle + interfacce viene richiesto di sistemare anche il codice che utilizza + quell'interfaccia. Quindi, il codice che è stato inserito nel ramo principale + ha dei costi di mantenimento significativamente più bassi. + +- Oltre a ciò, spesso il codice che è all'interno del kernel sarà migliorato da + altri sviluppatori. Dare pieni poteri alla vostra comunità di utenti e ai + clienti può portare a sorprendenti risultati che migliorano i vostri + prodotti. + +- Il codice kernel è soggetto a revisioni, sia prima che dopo l'inserimento + nel ramo principale. Non importa quanto forti fossero le abilità dello + sviluppatore originale, il processo di revisione troverà il modo di migliore + il codice. Spesso la revisione trova bachi importanti e problemi di + sicurezza. Questo è particolarmente vero per il codice che è stato + sviluppato in un ambiente chiuso; tale codice ottiene un forte beneficio + dalle revisioni provenienti da sviluppatori esteri. Il codice + "fuori dai sorgenti", invece, è un codice di bassa qualità. + +- La partecipazione al processo di sviluppo costituisce la vostra via per + influenzare la direzione di sviluppo del kernel. Gli utilizzatori che + "reclamano da bordo campo" sono ascoltati, ma gli sviluppatori attivi + hanno una voce più forte - e la capacità di implementare modifiche che + renderanno il kernel più funzionale alle loro necessità. + +- Quando il codice è gestito separatamente, esiste sempre la possibilità che + terze parti contribuiscano con una differente implementazione che fornisce + le stesse funzionalità. Se dovesse accadere, l'inserimento del codice + diventerà molto più difficile - fino all'impossibilità. Poi, dovrete far + fronte a delle alternative poco piacevoli, come: (1) mantenere un elemento + non standard "fuori dai sorgenti" per un tempo indefinito, o (2) abbandonare + il codice e far migrare i vostri utenti alla versione "nei sorgenti". + +- Contribuire al codice è l'azione fondamentale che fa funzionare tutto il + processo. Contribuendo attraverso il vostro codice potete aggiungere nuove + funzioni al kernel e fornire competenze ed esempi che saranno utili ad + altri sviluppatori. Se avete sviluppato del codice Linux (o state pensando + di farlo), avete chiaramente interesse nel far proseguire il successo di + questa piattaforma. Contribuire al codice è une delle migliori vie per + aiutarne il successo. + +Il ragionamento sopra citato si applica ad ogni codice "fuori dai sorgenti" +dal kernel, incluso il codice proprietario distribuito solamente in formato +binario. Ci sono, comunque, dei fattori aggiuntivi che dovrebbero essere +tenuti in conto prima di prendere in considerazione qualsiasi tipo di +distribuzione binaria di codice kernel. Questo include che: + +- Le questioni legali legate alla distribuzione di moduli kernel proprietari + sono molto nebbiose; parecchi detentori di copyright sul kernel credono che + molti moduli binari siano prodotti derivati del kernel e che, come risultato, + la loro diffusione sia una violazione della licenza generale di GNU (della + quale si parlerà più avanti). L'autore qui non è un avvocato, e + niente in questo documento può essere considerato come un consiglio legale. + Il vero stato legale dei moduli proprietari può essere determinato + esclusivamente da un giudice. Ma l'incertezza che perseguita quei moduli + è lì comunque. + +- I moduli binari aumentano di molto la difficoltà di fare debugging del + kernel, al punto che la maggior parte degli sviluppatori del kernel non + vorranno nemmeno tentare. Quindi la diffusione di moduli esclusivamente + binari renderà difficile ai vostri utilizzatori trovare un supporto dalla + comunità. + +- Il supporto è anche difficile per i distributori di moduli binari che devono + fornire una versione del modulo per ogni distribuzione e per ogni versione + del kernel che vogliono supportate. Per fornire una copertura ragionevole e + comprensiva, può essere richiesto di produrre dozzine di singoli moduli. + E inoltre i vostri utilizzatori dovranno aggiornare il vostro modulo + separatamente ogni volta che aggiornano il loro kernel. + +- Tutto ciò che è stato detto prima riguardo alla revisione del codice si + applica doppiamente al codice proprietario. Dato che questo codice non è + del tutto disponibile, non può essere revisionato dalla comunità e avrà, + senza dubbio, seri problemi. + +I produttori di sistemi integrati, in particolare, potrebbero esser tentati +dall'evitare molto di ciò che è stato detto in questa sezione, credendo che +stiano distribuendo un prodotto finito che utilizza una versione del kernel +immutabile e che non richiede un ulteriore sviluppo dopo il rilascio. Questa +idea non comprende il valore di una vasta revisione del codice e il valore +del permettere ai propri utenti di aggiungere funzionalità al vostro prodotto. +Ma anche questi prodotti, hanno una vita commerciale limitata, dopo la quale +deve essere rilasciata una nuova versione. A quel punto, i produttori il cui +codice è nel ramo principale di sviluppo avranno un codice ben mantenuto e +saranno in una posizione migliore per ottenere velocemente un nuovo prodotto +pronto per essere distribuito. + + +Licenza +------- + +IL codice Linux utilizza diverse licenze, ma il codice completo deve essere +compatibile con la seconda versione della licenza GNU General Public License +(GPLv2), che è la licenza che copre la distribuzione del kernel. +Nella pratica, ciò significa che tutti i contributi al codice sono coperti +anche'essi dalla GPLv2 (con, opzionalmente, una dicitura che permette la +possibilità di distribuirlo con licenze più recenti di GPL) o dalla licenza +three-clause BSD. Qualsiasi contributo che non è coperto da una licenza +compatibile non verrà accettata nel kernel. + +Per il codice sottomesso al kernel non è necessario (o richiesto) la +concessione del Copyright. Tutto il codice inserito nel ramo principale del +kernel conserva la sua proprietà originale; ne risulta che ora il kernel abbia +migliaia di proprietari. + +Una conseguenza di questa organizzazione della proprietà è che qualsiasi +tentativo di modifica della licenza del kernel è destinata ad un quasi sicuro +fallimento. Esistono alcuni scenari pratici nei quali il consenso di tutti +i detentori di copyright può essere ottenuto (o il loro codice verrà rimosso +dal kernel). Quindi, in sostanza, non esiste la possibilità che si giunga ad +una versione 3 della licenza GPL nel prossimo futuro. + +È imperativo che tutto il codice che contribuisce al kernel sia legittimamente +software libero. Per questa ragione, un codice proveniente da un contributore +anonimo (o sotto pseudonimo) non verrà accettato. È richiesto a tutti i +contributori di firmare il proprio codice, attestando così che quest'ultimo +può essere distribuito insieme al kernel sotto la licenza GPL. Il codice che +non è stato licenziato come software libero dal proprio creatore, o che +potrebbe creare problemi di copyright per il kernel (come il codice derivante +da processi di ingegneria inversa senza le opportune tutele), non può essere +diffuso. + +Domande relative a questioni legate al copyright sono frequenti nelle liste +di discussione dedicate allo sviluppo di Linux. Tali quesiti, normalmente, +non riceveranno alcuna risposta, ma una cosa deve essere tenuta presente: +le persone che risponderanno a quelle domande non sono avvocati e non possono +fornire supporti legali. Se avete questioni legali relative ai sorgenti +del codice Linux, non esiste alternativa che quella di parlare con un +avvocato esperto nel settore. Fare affidamento sulle risposte ottenute da +una lista di discussione tecnica è rischioso. diff --git a/Documentation/translations/it_IT/process/2.Process.rst b/Documentation/translations/it_IT/process/2.Process.rst new file mode 100644 index 000000000000..9af4d01617c4 --- /dev/null +++ b/Documentation/translations/it_IT/process/2.Process.rst @@ -0,0 +1,531 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/2.Process.rst <development_process>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_development_process: + +Come funziona il processo di sviluppo +===================================== + +Lo sviluppo del Kernel agli inizi degli anno '90 era abbastanza libero, con +un numero di utenti e sviluppatori relativamente basso. Con una base +di milioni di utenti e con 2000 sviluppatori coinvolti nel giro di un anno, +il kernel da allora ha messo in atto un certo numero di procedure per rendere +lo sviluppo più agevole. È richiesta una solida conoscenza di come tale +processo si svolge per poter esserne parte attiva. + +Il quadro d'insieme +------------------- + +Gli sviluppatori kernel utilizzano un calendario di rilascio generico, dove +ogni due o tre mesi viene effettuata un rilascio importante del kernel. +I rilasci più recenti sono stati: + + ====== ================= + 4.11 Aprile 30, 2017 + 4.12 Luglio 2, 2017 + 4.13 Settembre 3, 2017 + 4.14 Novembre 12, 2017 + 4.15 Gennaio 28, 2018 + 4.16 Aprile 1, 2018 + ====== ================= + +Ciascun rilascio 4.x è un importante rilascio del kernel con nuove +funzionalità, modifiche interne dell'API, e molto altro. Un tipico +rilascio 4.x contiene quasi 13,000 gruppi di modifiche con ulteriori +modifiche a parecchie migliaia di linee di codice. La 4.x. è pertanto la +linea di confine nello sviluppo del kernel Linux; il kernel utilizza un sistema +di sviluppo continuo che integra costantemente nuove importanti modifiche. + +Viene seguita una disciplina abbastanza lineare per l'inclusione delle +patch di ogni rilascio. All'inizio di ogni ciclo di sviluppo, la +"finestra di inclusione" viene dichiarata aperta. In quel momento il codice +ritenuto sufficientemente stabile(e che è accettato dalla comunità di sviluppo) +viene incluso nel ramo principale del kernel. La maggior parte delle +patch per un nuovo ciclo di sviluppo (e tutte le più importanti modifiche) +saranno inserite durante questo periodo, ad un ritmo che si attesta sulle +1000 modifiche ("patch" o "gruppo di modifiche") al giorno. + +(per inciso, vale la pena notare che i cambiamenti integrati durante la +"finestra di inclusione" non escono dal nulla; questi infatti, sono stati +raccolti e, verificati in anticipo. Il funzionamento di tale procedimento +verrà descritto dettagliatamente più avanti). + +La finestra di inclusione resta attiva approssimativamente per due settimane. +Al termine di questo periodo, Linus Torvald dichiarerà che la finestra è +chiusa e rilascerà il primo degli "rc" del kernel. +Per il kernel che è destinato ad essere 2.6.40, per esempio, il rilascio +che emerge al termine della finestra d'inclusione si chiamerà 2.6.40-rc1. +Questo rilascio indica che il momento di aggiungere nuovi componenti è +passato, e che è iniziato il periodo di stabilizzazione del prossimo kernel. + +Nelle successive sei/dieci settimane, potranno essere sottoposte solo modifiche +che vanno a risolvere delle problematiche. Occasionalmente potrà essere +consentita una modifica più consistente, ma tali occasioni sono rare. +Gli sviluppatori che tenteranno di aggiungere nuovi elementi al di fuori della +finestra di inclusione, tendenzialmente, riceveranno un accoglienza poco +amichevole. Come regola generale: se vi perdete la finestra di inclusione per +un dato componente, la cosa migliore da fare è aspettare il ciclo di sviluppo +successivo (un'eccezione può essere fatta per i driver per hardware non +supportati in precedenza; se toccano codice non facente parte di quello +attuale, che non causino regressioni e che potrebbero essere aggiunti in +sicurezza in un qualsiasi momento) + +Mentre le correzioni si aprono la loro strada all'interno del ramo principale, +il ritmo delle modifiche rallenta col tempo. Linus rilascia un nuovo +kernel -rc circa una volta alla settimana; e ne usciranno circa 6 o 9 prima +che il kernel venga considerato sufficientemente stabile e che il rilascio +finale 2.6.x venga fatto. A quel punto tutto il processo ricomincerà. + +Esempio: ecco com'è andato il ciclo di sviluppo della versione 4.16 +(tutte le date si collocano nel 2018) + + + ============== ======================================= + Gennaio 28 4.15 rilascio stabile + Febbraio 11 4.16-rc1, finestra di inclusione chiusa + Febbraio 18 4.16-rc2 + Febbraio 25 4.16-rc3 + Marzo 4 4.16-rc4 + Marzo 11 4.16-rc5 + Marzo 18 4.16-rc6 + Marzo 25 4.16-rc7 + Aprile 1 4.17 rilascio stabile + ============== ======================================= + +In che modo gli sviluppatori decidono quando chiudere il ciclo di sviluppo e +creare quindi una rilascio stabile? Un metro valido è il numero di regressioni +rilevate nel precedente rilascio. Nessun baco è il benvenuto, ma quelli che +procurano problemi su sistemi che hanno funzionato in passato sono considerati +particolarmente seri. Per questa ragione, le modifiche che portano ad una +regressione sono viste sfavorevolmente e verranno quasi sicuramente annullate +durante il periodo di stabilizzazione. + +L'obiettivo degli sviluppatori è quello di aggiustare tutte le regressioni +conosciute prima che avvenga il rilascio stabile. Nel mondo reale, questo +tipo di perfezione difficilmente viene raggiunta; esistono troppe variabili +in un progetto di questa portata. Arriva un punto dove ritardare il rilascio +finale peggiora la situazione; la quantità di modifiche in attesa della +prossima finestra di inclusione crescerà enormemente, creando ancor più +regressioni al giro successivo. Quindi molti kernel 4.x escono con una +manciata di regressioni delle quali, si spera, nessuna è grave. + +Una volta che un rilascio stabile è fatto, il suo costante mantenimento è +affidato al "squadra stabilità", attualmente composta da Greg Kroah-Hartman. +Questa squadra rilascia occasionalmente degli aggiornamenti relativi al +rilascio stabile usando la numerazione 4.x.y. Per essere presa in +considerazione per un rilascio d'aggiornamento, una modifica deve: +(1) correggere un baco importante (2) essere già inserita nel ramo principale +per il prossimo sviluppo del kernel. Solitamente, passato il loro rilascio +iniziale, i kernel ricevono aggiornamenti per più di un ciclo di sviluppo. +Quindi, per esempio, la storia del kernel 4.13 appare così: + + ============== =============================== + Settembre 3 4.13 rilascio stabile + Settembre 13 4.13.1 + Settembre 20 4.13.2 + Settembre 27 4.13.3 + Ottobre 5 4.13.4 + Ottobre 12 4.13.5 + ... ... + Novembre 24 4.13.16 + ============== =============================== + +La 4.13.16 fu l'aggiornamento finale per la versione 4.13. + +Alcuni kernel sono destinati ad essere kernel a "lungo termine"; questi +riceveranno assistenza per un lungo periodo di tempo. Al momento in cui +scriviamo, i manutentori dei kernel stabili a lungo termine sono: + + ====== ====================== ========================================== + 3.16 Ben Hutchings (kernel stabile molto più a lungo termine) + 4.1 Sasha Levin + 4.4 Greg Kroah-Hartman (kernel stabile molto più a lungo termine) + 4.9 Greg Kroah-Hartman + 4.14 Greg Kroah-Hartman + ====== ====================== ========================================== + + +Questa selezione di kernel di lungo periodo sono puramente dovuti ai loro +manutentori, alla loro necessità e al tempo per tenere aggiornate proprio +quelle versioni. Non ci sono altri kernel a lungo termine in programma per +alcun rilascio in arrivo. + +Il ciclo di vita di una patch +----------------------------- + +Le patch non passano direttamente dalla tastiera dello sviluppatori +al ramo principale del kernel. Esiste, invece, una procedura disegnata +per assicurare che ogni patch sia di buona qualità e desiderata nel +ramo principale. Questo processo avviene velocemente per le correzioni +meno importanti, o, nel caso di patch ampie e controverse, va avanti per anni. +Per uno sviluppatore la maggior frustrazione viene dalla mancanza di +comprensione di questo processo o dai tentativi di aggirarlo. + +Nella speranza di ridurre questa frustrazione, questo documento spiegherà +come una patch viene inserita nel kernel. Ciò che segue è un'introduzione +che descrive il processo ideale. Approfondimenti verranno invece trattati +più avanti. + +Una patch attraversa, generalmente, le seguenti fasi: + + - Progetto. In questa fase sono stabilite quelli che sono i requisiti + della modifica - e come verranno soddisfatti. Il lavoro di progettazione + viene spesso svolto senza coinvolgere la comunità, ma è meglio renderlo + il più aperto possibile; questo può far risparmiare molto tempo evitando + eventuali riprogettazioni successive. + + - Prima revisione. Le patch vengono pubblicate sulle liste di discussione + interessate, e gli sviluppatori in quella lista risponderanno coi loro + commenti. Se si svolge correttamente, questo procedimento potrebbe far + emergere problemi rilevanti in una patch. + + - Revisione più ampia. Quando la patch è quasi pronta per essere inserita + nel ramo principale, un manutentore importante del sottosistema dovrebbe + accettarla - anche se, questa accettazione non è una garanzia che la + patch arriverà nel ramo principale. La patch sarà visibile nei sorgenti + del sottosistema in questione e nei sorgenti -next (descritti sotto). + Quando il processo va a buon fine, questo passo porta ad una revisione + più estesa della patch e alla scoperta di problemi d'integrazione + con il lavoro altrui. + +- Per favore, tenete da conto che la maggior parte dei manutentori ha + anche un lavoro quotidiano, quindi integrare le vostre patch potrebbe + non essere la loro priorità più alta. Se una vostra patch riceve + dei suggerimenti su dei cambiamenti necessari, dovreste applicare + quei cambiamenti o giustificare perché non sono necessari. Se la vostra + patch non riceve alcuna critica ma non è stata integrata dal + manutentore del driver o sottosistema, allora dovreste continuare con + i necessari aggiornamenti per mantenere la patch aggiornata al kernel + più recente cosicché questa possa integrarsi senza problemi; continuate + ad inviare gli aggiornamenti per essere revisionati e integrati. + + - Inclusione nel ramo principale. Eventualmente, una buona patch verrà + inserita all'interno nel repositorio principale, gestito da + Linus Torvalds. In questa fase potrebbero emergere nuovi problemi e/o + commenti; è importante che lo sviluppatore sia collaborativo e che sistemi + ogni questione che possa emergere. + + - Rilascio stabile. Ora, il numero di utilizzatori che sono potenzialmente + toccati dalla patch è aumentato, quindi, ancora una volta, potrebbero + emergere nuovi problemi. + + - Manutenzione di lungo periodo. Nonostante sia possibile che uno sviluppatore + si dimentichi del codice dopo la sua integrazione, questo comportamento + lascia una brutta impressione nella comunità di sviluppo. Integrare il + codice elimina alcuni degli oneri facenti parte della manutenzione, in + particolare, sistemerà le problematiche causate dalle modifiche all'API. + Ma lo sviluppatore originario dovrebbe continuare ad assumersi la + responsabilità per il codice se quest'ultimo continua ad essere utile + nel lungo periodo. + +Uno dei più grandi errori fatti dagli sviluppatori kernel (o dai loro datori +di lavoro) è quello di cercare di ridurre tutta la procedura ad una singola +"integrazione nel remo principale". Questo approccio inevitabilmente conduce +a una condizione di frustrazione per tutti coloro che sono coinvolti. + +Come le modifiche finiscono nel Kernel +-------------------------------------- + +Esiste una sola persona che può inserire le patch nel repositorio principale +del kernel: Linus Torvalds. Ma, di tutte le 9500 patch che entrarono nella +versione 2.6.38 del kernel, solo 112 (circa l'1,3%) furono scelte direttamente +da Linus in persona. Il progetto del kernel è cresciuto fino a raggiungere +una dimensione tale per cui un singolo sviluppatore non può controllare e +selezionare indipendentemente ogni modifica senza essere supportato. +La via scelta dagli sviluppatori per indirizzare tale crescita è stata quella +di utilizzare un sistema di "sottotenenti" basato sulla fiducia. + +Il codice base del kernel è spezzato in una serie si sottosistemi: rete, +supporto per specifiche architetture, gestione della memoria, video e +strumenti, etc. Molti sottosistemi hanno un manutentore designato: ovvero uno +sviluppatore che ha piena responsabilità di tutto il codice presente in quel +sottosistema. Tali manutentori di sottosistema sono i guardiani +(in un certo senso) della parte di kernel che gestiscono; sono coloro che +(solitamente) accetteranno una patch per l'inclusione nel ramo principale +del kernel. + +I manutentori di sottosistema gestiscono ciascuno la propria parte dei sorgenti +del kernel, utilizzando abitualmente (ma certamente non sempre) git. +Strumenti come git (e affini come quilt o mercurial) permettono ai manutentori +di stilare una lista delle patch, includendo informazioni sull'autore ed +altri metadati. In ogni momento, il manutentore può individuare quale patch +nel sua repositorio non si trova nel ramo principale. + +Quando la "finestra di integrazione" si apre, i manutentori di alto livello +chiederanno a Linus di "prendere" dai loro repositori le modifiche che hanno +selezionato per l'inclusione. Se Linus acconsente, il flusso di patch si +convoglierà nel repositorio di quest ultimo, divenendo così parte del ramo +principale del kernel. La quantità d'attenzione che Linus presta alle +singole patch ricevute durante l'operazione di integrazione varia. +È chiaro che, qualche volta, guardi più attentamente. Ma, come regola +generale, Linus confida nel fatto che i manutentori di sottosistema non +selezionino pessime patch. + +I manutentori di sottosistemi, a turno, possono "prendere" patch +provenienti da altri manutentori. Per esempio, i sorgenti per la rete rete +sono costruiti da modifiche che si sono accumulate inizialmente nei sorgenti +dedicati ai driver per dispositivi di rete, rete senza fili, ecc. Tale +catena di repositori può essere più o meno lunga, benché raramente ecceda +i due o tre collegamenti. Questo processo è conosciuto come +"la catena della fiducia", perché ogni manutentore all'interno della +catena si fida di coloro che gestiscono i livelli più bassi. + +Chiaramente, in un sistema come questo, l'inserimento delle patch all'interno +del kernel si basa sul trovare il manutentore giusto. Di norma, inviare +patch direttamente a Linus non è la via giusta. + + +Sorgenti -next +-------------- + +La catena di sottosistemi guida il flusso di patch all'interno del kernel, +ma solleva anche un interessante quesito: se qualcuno volesse vedere tutte le +patch pronte per la prossima finestra di integrazione? +Gli sviluppatori si interesseranno alle patch in sospeso per verificare +che non ci siano altri conflitti di cui preoccuparsi; una modifica che, per +esempio, cambia il prototipo di una funzione fondamentale del kernel andrà in +conflitto con qualsiasi altra modifica che utilizzi la vecchia versione di +quella funzione. Revisori e tester vogliono invece avere accesso alle +modifiche nella loro totalità prima che approdino nel ramo principale del +kernel. Uno potrebbe prendere le patch provenienti da tutti i sottosistemi +d'interesse, ma questo sarebbe un lavoro enorme e fallace. + +La risposta ci viene sotto forma di sorgenti -next, dove i sottosistemi sono +raccolti per essere testati e controllati. Il più vecchio di questi sorgenti, +gestito da Andrew Morton, è chiamato "-mm" (memory management, che è l'inizio +di tutto). L'-mm integra patch proveniente da una lunga lista di sottosistemi; +e ha, inoltre, alcune patch destinate al supporto del debugging. + +Oltre a questo, -mm contiene una raccolta significativa di patch che sono +state selezionate da Andrew direttamente. Queste patch potrebbero essere +state inviate in una lista di discussione, o possono essere applicate ad una +parte del kernel per la quale non esiste un sottosistema dedicato. +Di conseguenza, -mm opera come una specie di sottosistema "ultima spiaggia"; +se per una patch non esiste una via chiara per entrare nel ramo principale, +allora è probabile che finirà in -mm. Le patch passate per -mm +eventualmente finiranno nel sottosistema più appropriato o saranno inviate +direttamente a Linus. In un tipico ciclo di sviluppo, circa il 5-10% delle +patch andrà nel ramo principale attraverso -mm. + +La patch -mm correnti sono disponibili nella cartella "mmotm" (-mm of +the moment) all'indirizzo: + + http://www.ozlabs.org/~akpm/mmotm/ + +È molto probabile che l'uso dei sorgenti MMOTM diventi un'esperienza +frustrante; ci sono buone probabilità che non compili nemmeno. + +I sorgenti principali per il prossimo ciclo d'integrazione delle patch +è linux-next, gestito da Stephen Rothwell. I sorgenti linux-next sono, per +definizione, un'istantanea di come dovrà apparire il ramo principale dopo che +la prossima finestra di inclusione si chiuderà. I linux-next sono annunciati +sulla lista di discussione linux-kernel e linux-next nel momento in cui +vengono assemblati; e possono essere scaricate da: + + http://www.kernel.org/pub/linux/kernel/next/ + +Linux-next è divenuto parte integrante del processo di sviluppo del kernel; +tutte le patch incorporate durante una finestra di integrazione dovrebbero +aver trovato la propria strada in linux-next, a volte anche prima dell'apertura +della finestra di integrazione. + + +Sorgenti in preparazione +------------------------ + +Nei sorgenti del kernel esiste la cartella drivers/staging/, dove risiedono +molte sotto-cartelle per i driver o i filesystem che stanno per essere aggiunti +al kernel. Questi restano nella cartella drivers/staging fintanto che avranno +bisogno di maggior lavoro; una volta completato, possono essere spostate +all'interno del kernel nel posto più appropriato. Questo è il modo di tener +traccia dei driver che non sono ancora in linea con gli standard di codifica +o qualità, ma che le persone potrebbero voler usare ugualmente e tracciarne +lo sviluppo. + +Greg Kroah-Hartman attualmente gestisce i sorgenti in preparazione. I driver +che non sono completamente pronti vengono inviati a lui, e ciascun driver avrà +la propria sotto-cartella in drivers/staging/. Assieme ai file sorgenti +dei driver, dovrebbe essere presente nella stessa cartella anche un file TODO. +Il file TODO elenca il lavoro ancora da fare su questi driver per poter essere +accettati nel kernel, e indica anche la lista di persone da inserire in copia +conoscenza per ogni modifica fatta. Le regole attuali richiedono che i +driver debbano, come minimo, compilare adeguatamente. + +La *preparazione* può essere una via relativamente facile per inserire nuovi +driver all'interno del ramo principale, dove, con un po' di fortuna, saranno +notati da altri sviluppatori e migliorati velocemente. Entrare nella fase +di preparazione non è però la fine della storia, infatti, il codice che si +trova nella cartella staging che non mostra regolari progressi potrebbe +essere rimosso. Le distribuzioni, inoltre, tendono a dimostrarsi relativamente +riluttanti nell'attivare driver in preparazione. Quindi lo preparazione è, +nel migliore dei casi, una tappa sulla strada verso il divenire un driver +del ramo principale. + + +Strumenti +--------- + +Come è possibile notare dal testo sopra, il processo di sviluppo del kernel +dipende pesantemente dalla capacità di guidare la raccolta di patch in +diverse direzioni. L'intera cosa non funzionerebbe se non venisse svolta +con l'uso di strumenti appropriati e potenti. Spiegare l'uso di tali +strumenti non è lo scopo di questo documento, ma c'è spazio per alcuni +consigli. + +In assoluto, nella comunità del kernel, predomina l'uso di git come sistema +di gestione dei sorgenti. Git è una delle diverse tipologie di sistemi +distribuiti di controllo versione che sono stati sviluppati nella comunità +del software libero. Esso è calibrato per lo sviluppo del kernel, e si +comporta abbastanza bene quando ha a che fare con repositori grandi e con un +vasto numero di patch. Git ha inoltre la reputazione di essere difficile +da imparare e utilizzare, benché stia migliorando. Agli sviluppatori +del kernel viene richiesta un po' di familiarità con git; anche se non lo +utilizzano per il proprio lavoro, hanno bisogno di git per tenersi al passo +con il lavoro degli altri sviluppatori (e con il ramo principale). + +Git è ora compreso in quasi tutte le distribuzioni Linux. Esiste una sito che +potete consultare: + + http://git-scm.com/ + +Qui troverete i riferimenti alla documentazione e alle guide passo-passo. + +Tra gli sviluppatori Kernel che non usano git, la scelta alternativa più +popolare è quasi sicuramente Mercurial: + + http://www.selenic.com/mercurial/ + +Mercurial condivide diverse caratteristiche con git, ma fornisce +un'interfaccia che potrebbe risultare più semplice da utilizzare. + +L'altro strumento che vale la pena conoscere è Quilt: + + http://savannah.nongnu.org/projects/quilt/ + + +Quilt è un sistema di gestione delle patch, piuttosto che un sistema +di gestione dei sorgenti. Non mantiene uno storico degli eventi; ma piuttosto +è orientato verso il tracciamento di uno specifico insieme di modifiche +rispetto ad un codice in evoluzione. Molti dei più grandi manutentori di +sottosistema utilizzano quilt per gestire le patch che dovrebbero essere +integrate. Per la gestione di certe tipologie di sorgenti (-mm, per esempio), +quilt è il miglior strumento per svolgere il lavoro. + + +Liste di discussione +-------------------- + +Una grossa parte del lavoro di sviluppo del Kernel Linux viene svolto tramite +le liste di discussione. È difficile essere un membro della comunità +pienamente coinvolto se non si partecipa almeno ad una lista da qualche +parte. Ma, le liste di discussione di Linux rappresentano un potenziale +problema per gli sviluppatori, che rischiano di venir sepolti da un mare di +email, restare incagliati nelle convenzioni in vigore nelle liste Linux, +o entrambi. + +Molte delle liste di discussione del Kernel girano su vger.kernel.org; +l'elenco principale lo si trova sul sito: + + http://vger.kernel.org/vger-lists.html + +Esistono liste gestite altrove; un certo numero di queste sono in +lists.redhat.com. + +La lista di discussione principale per lo sviluppo del kernel è, ovviamente, +linux-kernel. Questa lista è un luogo ostile dove trovarsi; i volumi possono +raggiungere i 500 messaggi al giorno, la quantità di "rumore" è elevata, +la conversazione può essere strettamente tecnica e i partecipanti non sono +sempre preoccupati di mostrare un alto livello di educazione. Ma non esiste +altro luogo dove la comunità di sviluppo del kernel si unisce per intero; +gli sviluppatori che evitano tale lista si perderanno informazioni importanti. + +Ci sono alcuni consigli che possono essere utili per sopravvivere a +linux-kernel: + +- Tenete la lista in una cartella separata, piuttosto che inserirla nella + casella di posta principale. Così da essere in grado di ignorare il flusso + di mail per un certo periodo di tempo. + +- Non cercate di seguire ogni conversazione - nessuno lo fa. È importante + filtrare solo gli argomenti d'interesse (sebbene va notato che le + conversazioni di lungo periodo possono deviare dall'argomento originario + senza cambiare il titolo della mail) e le persone che stanno partecipando. + +- Non alimentate i troll. Se qualcuno cerca di creare nervosismo, ignoratelo. + +- Quando rispondete ad una mail linux-kernel (o ad altre liste) mantenete + tutti i Cc:. In assenza di importanti motivazioni (come una richiesta + esplicita), non dovreste mai togliere destinatari. Assicuratevi sempre che + la persona alla quale state rispondendo sia presente nella lista Cc. Questa + usanza fa si che divenga inutile chiedere esplicitamente di essere inseriti + in copia nel rispondere al vostro messaggio. + +- Cercate nell'archivio della lista (e nella rete nella sua totalità) prima + di far domande. Molti sviluppatori possono divenire impazienti con le + persone che chiaramente non hanno svolto i propri compiti a casa. + +- Evitate il *top-posting* (cioè la pratica di mettere la vostra risposta sopra + alla frase alla quale state rispondendo). Ciò renderebbe la vostra risposta + difficile da leggere e genera scarsa impressione. + +- Chiedete nella lista di discussione corretta. Linux-kernel può essere un + punto di incontro generale, ma non è il miglior posto dove trovare + sviluppatori da tutti i sottosistemi. + +Infine, la ricerca della corretta lista di discussione è uno degli errori più +comuni per gli sviluppatori principianti. Qualcuno che pone una domanda +relativa alla rete su linux-kernel riceverà quasi certamente il suggerimento +di chiedere sulla lista netdev, che è la lista frequentata dagli sviluppatori +di rete. Ci sono poi altre liste per i sottosistemi SCSI, video4linux, IDE, +filesystem, etc. Il miglior posto dove cercare una lista di discussione è il +file MAINTAINERS che si trova nei sorgenti del kernel. + +Iniziare con lo sviluppo del Kernel +----------------------------------- + +Sono comuni le domande sul come iniziare con lo sviluppo del kernel - sia da +singole persone che da aziende. Altrettanto comuni sono i passi falsi che +rendono l'inizio di tale relazione più difficile di quello che dovrebbe essere. + +Le aziende spesso cercano di assumere sviluppatori noti per creare un gruppo +di sviluppo iniziale. Questo, in effetti, può essere una tecnica efficace. +Ma risulta anche essere dispendiosa e non va ad accrescere il bacino di +sviluppatori kernel con esperienza. È possibile anche "portare a casa" +sviluppatori per accelerare lo sviluppo del kernel, dando comunque +all'investimento un po' di tempo. Prendersi questo tempo può fornire +al datore di lavoro un gruppo di sviluppatori che comprendono sia il kernel +che l'azienda stessa, e che possono supportare la formazione di altre persone. +Nel medio periodo, questa è spesso uno delle soluzioni più proficue. + +I singoli sviluppatori sono spesso, comprensibilmente, una perdita come punto +di partenza. Iniziare con un grande progetto può rivelarsi intimidatorio; +spesso all'inizio si vuole solo verificare il terreno con qualcosa di piccolo. +Questa è una delle motivazioni per le quali molti sviluppatori saltano alla +creazione di patch che vanno a sistemare errori di battitura o +problematiche minori legate allo stile del codice. Sfortunatamente, tali +patch creano un certo livello di rumore che distrae l'intera comunità di +sviluppo, quindi, sempre di più, esse vengono degradate. I nuovi sviluppatori +che desiderano presentarsi alla comunità non riceveranno l'accoglienza +che vorrebbero con questi mezzi. + +Andrew Morton da questo consiglio agli aspiranti sviluppatori kernel + +:: + + Il primo progetto per un neofita del kernel dovrebbe essere + sicuramente quello di "assicurarsi che il kernel funzioni alla + perfezione sempre e su tutte le macchine sulle quali potete stendere + la vostra mano". Solitamente il modo per fare ciò è quello di + collaborare con gli altri nel sistemare le cose (questo richiede + persistenza!) ma va bene - è parte dello sviluppo kernel. + +(http://lwn.net/Articles/283982/). + +In assenza di problemi ovvi da risolvere, si consiglia agli sviluppatori +di consultare, in generale, la lista di regressioni e di bachi aperti. +Non c'è mai carenza di problematiche bisognose di essere sistemate; +accollandosi tali questioni gli sviluppatori accumuleranno esperienza con +la procedura, ed allo stesso tempo, aumenteranno la loro rispettabilità +all'interno della comunità di sviluppo. diff --git a/Documentation/translations/it_IT/process/3.Early-stage.rst b/Documentation/translations/it_IT/process/3.Early-stage.rst new file mode 100644 index 000000000000..443ac1e5558f --- /dev/null +++ b/Documentation/translations/it_IT/process/3.Early-stage.rst @@ -0,0 +1,241 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/3.Early-stage.rst <development_early_stage>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_development_early_stage: + +I primi passi della pianificazione +================================== + +Osservando un progetto di sviluppo per il kernel Linux, si potrebbe essere +tentati dal saltare tutto e iniziare a codificare. Tuttavia, come ogni +progetto significativo, molta della preparazione per giungere al successo +viene fatta prima che una sola linea di codice venga scritta. Il tempo speso +nella pianificazione e la comunicazione può far risparmiare molto +tempo in futuro. + +Specificare il problema +----------------------- + +Come qualsiasi progetto ingegneristico, un miglioramento del kernel di +successo parte con una chiara descrizione del problema da risolvere. +In alcuni casi, questo passaggio è facile: ad esempio quando un driver è +richiesto per un particolare dispositivo. In altri casi invece, si +tende a confondere il problema reale con le soluzioni proposte e questo +può portare all'emergere di problemi. + +Facciamo un esempio: qualche anno fa, gli sviluppatori che lavoravano con +linux audio cercarono un modo per far girare le applicazioni senza dropouts +o altri artefatti dovuti all'eccessivo ritardo nel sistema. La soluzione +alla quale giunsero fu un modulo del kernel destinato ad agganciarsi al +framework Linux Security Module (LSM); questo modulo poteva essere +configurato per dare ad una specifica applicazione accesso allo +schedulatore *realtime*. Tale modulo fu implementato e inviato nella +lista di discussione linux-kernel, dove incontrò subito dei problemi. + +Per gli sviluppatori audio, questo modulo di sicurezza era sufficiente a +risolvere il loro problema nell'immediato. Per l'intera comunità kernel, +invece, era un uso improprio del framework LSM (che non è progettato per +conferire privilegi a processi che altrimenti non avrebbero potuto ottenerli) +e un rischio per la stabilità del sistema. Le loro soluzioni di punta nel +breve periodo, comportavano un accesso alla schedulazione realtime attraverso +il meccanismo rlimit, e nel lungo periodo un costante lavoro nella riduzione +dei ritardi. + +La comunità audio, comunque, non poteva vedere al di là della singola +soluzione che avevano implementato; erano riluttanti ad accettare alternative. +Il conseguente dissenso lasciò in quegli sviluppatori un senso di +disillusione nei confronti dell'intero processo di sviluppo; uno di loro +scrisse questo messaggio: + + Ci sono numerosi sviluppatori del kernel Linux davvero bravi, ma + rischiano di restare sovrastati da una vasta massa di stolti arroganti. + Cercare di comunicare le richieste degli utenti a queste persone è + una perdita di tempo. Loro sono troppo "intelligenti" per stare ad + ascoltare dei poveri mortali. + + (http://lwn.net/Articles/131776/). + +La realtà delle cose fu differente; gli sviluppatori del kernel erano molto +più preoccupati per la stabilità del sistema, per la manutenzione di lungo +periodo e cercavano la giusta soluzione alla problematica esistente con uno +specifico modulo. La morale della storia è quella di concentrarsi sul +problema - non su di una specifica soluzione- e di discuterne con la comunità +di sviluppo prima di investire tempo nella scrittura del codice. + +Quindi, osservando un progetto di sviluppo del kernel, si dovrebbe +rispondere a questa lista di domande: + +- Qual'è, precisamente, il problema che dev'essere risolto? + +- Chi sono gli utenti coinvolti da tal problema? A quale caso dovrebbe + essere indirizzata la soluzione? + +- In che modo il kernel risulta manchevole nell'indirizzare il problema + in questione? + +Solo dopo ha senso iniziare a considerare le possibili soluzioni. + +Prime discussioni +----------------- + +Quando si pianifica un progetto di sviluppo per il kernel, sarebbe quanto meno +opportuno discuterne inizialmente con la comunità prima di lanciarsi +nell'implementazione. Una discussione preliminare può far risparmiare sia +tempo che problemi in svariati modi: + + - Potrebbe essere che il problema sia già stato risolto nel kernel in + una maniera che non avete ancora compreso. Il kernel Linux è grande e ha + una serie di funzionalità e capacità che non sono scontate nell'immediato. + Non tutte le capacità del kernel sono documentate così bene come ci + piacerebbe, ed è facile perdersi qualcosa. Il vostro autore ha assistito + alla pubblicazione di un driver intero che duplica un altro driver + esistente di cui il nuovo autore era ignaro. Il codice che rinnova + ingranaggi già esistenti non è soltanto dispendioso; non verrà nemmeno + accettato nel ramo principale del kernel. + + - Potrebbero esserci proposte che non sono considerate accettabili per + l'integrazione all'interno del ramo principale. È meglio affrontarle + prima di scrivere il codice. + + - È possibile che altri sviluppatori abbiano pensato al problema; potrebbero + avere delle idee per soluzioni migliori, e potrebbero voler contribuire + alla loro creazione. + +Anni di esperienza con la comunità di sviluppo del kernel hanno impartito una +chiara lezione: il codice per il kernel che è pensato e sviluppato a porte +chiuse, inevitabilmente, ha problematiche che si rivelano solo quando il +codice viene rilasciato pubblicamente. Qualche volta tali problemi sono +importanti e richiedono mesi o anni di sforzi prima che il codice possa +raggiungere gli standard richiesti della comunità. +Alcuni esempi possono essere: + + - La rete Devicescape è stata creata e implementata per sistemi + mono-processore. Non avrebbe potuto essere inserita nel ramo principale + fino a che non avesse supportato anche i sistemi multi-processore. + Riadattare i meccanismi di sincronizzazione e simili è un compito difficile; + come risultato, l'inserimento di questo codice (ora chiamato mac80211) + fu rimandato per più di un anno. + + - Il filesystem Reiser4 include una seria di funzionalità che, secondo + l'opinione degli sviluppatori principali del kernel, avrebbero dovuto + essere implementate a livello di filesystem virtuale. Comprende + anche funzionalità che non sono facilmente implementabili senza esporre + il sistema al rischio di uno stallo. La scoperta tardiva di questi + problemi - e il diniego a risolverne alcuni - ha avuto come conseguenza + il fatto che Raiser4 resta fuori dal ramo principale del kernel. + + - Il modulo di sicurezza AppArmor utilizzava strutture dati del + filesystem virtuale interno in modi che sono stati considerati rischiosi e + inattendibili. Questi problemi (tra le altre cose) hanno tenuto AppArmor + fuori dal ramo principale per anni. + +Ciascuno di questi casi è stato un travaglio e ha richiesto del lavoro +straordinario, cose che avrebbero potuto essere evitate con alcune +"chiacchierate" preliminari con gli sviluppatori kernel. + +Con chi parlare? +---------------- + +Quando gli sviluppatori hanno deciso di rendere pubblici i propri progetti, la +domanda successiva sarà: da dove partiamo? La risposta è quella di trovare +la giusta lista di discussione e il giusto manutentore. Per le liste di +discussione, il miglior approccio è quello di cercare la lista più adatta +nel file MAINTAINERS. Se esiste una lista di discussione di sottosistema, +è preferibile pubblicare lì piuttosto che sulla lista di discussione generale +del kernel Linux; avrete maggiori probabilità di trovare sviluppatori con +esperienza sul tema, e l'ambiente che troverete potrebbe essere più +incoraggiante. + +Trovare manutentori può rivelarsi un po' difficoltoso. Ancora, il file +MAINTAINERS è il posto giusto da dove iniziare. Il file potrebbe non essere +sempre aggiornato, inoltre, non tutti i sottosistemi sono rappresentati qui. +Coloro che sono elencati nel file MAINTAINERS potrebbero, in effetti, non +essere le persone che attualmente svolgono quel determinato ruolo. Quindi, +quando c'è un dubbio su chi contattare, un trucco utile è quello di usare +git (git log in particolare) per vedere chi attualmente è attivo all'interno +del sottosistema interessato. Controllate chi sta scrivendo le patch, +e chi, se non ci fosse nessuno, sta aggiungendo la propria firma +(Signed-off-by) a quelle patch. Quelle sono le persone maggiormente +qualificate per aiutarvi con lo sviluppo di nuovo progetto. + +Il compito di trovare il giusto manutentore, a volte, è una tale sfida che +ha spinto gli sviluppatori del kernel a scrivere uno script che li aiutasse +in questa ricerca: + +:: + + .../scripts/get_maintainer.pl + +Se questo script viene eseguito con l'opzione "-f" ritornerà il +manutentore(i) attuale per un dato file o cartella. Se viene passata una +patch sulla linea di comando, lo script elencherà i manutentori che +dovrebbero riceverne una copia. Ci sono svariate opzioni che regolano +quanto a fondo get_maintainer.pl debba cercare i manutentori; +siate quindi prudenti nell'utilizzare le opzioni più aggressive poiché +potreste finire per includere sviluppatori che non hanno un vero interesse +per il codice che state modificando. + +Se tutto ciò dovesse fallire, parlare con Andrew Morton potrebbe essere +un modo efficace per capire chi è il manutentore di un dato pezzo di codice. + +Quando pubblicare +----------------- + +Se potete, pubblicate i vostri intenti durante le fasi preliminari, sarà +molto utile. Descrivete il problema da risolvere e ogni piano che è stato +elaborato per l'implementazione. Ogni informazione fornita può aiutare +la comunità di sviluppo a fornire spunti utili per il progetto. + +Un evento che potrebbe risultare scoraggiate e che potrebbe accadere in +questa fase non è il ricevere una risposta ostile, ma, invece, ottenere +una misera o inesistente reazione. La triste verità è che: (1) gli +sviluppatori del kernel tendono ad essere occupati, (2) ci sono tante persone +con grandi progetti e poco codice (o anche solo la prospettiva di +avere un codice) a cui riferirsi e (3) nessuno è obbligato a revisionare +o a fare osservazioni in merito ad idee pubblicate da altri. Oltre a +questo, progetti di alto livello spesso nascondono problematiche che si +rivelano solo quando qualcuno cerca di implementarle; per questa ragione +gli sviluppatori kernel preferirebbero vedere il codice. + +Quindi, se una richiesta pubblica di commenti riscuote poco successo, non +pensate che ciò significhi che non ci sia interesse nel progetto. +Sfortunatamente, non potete nemmeno assumere che non ci siano problemi con +la vostra idea. La cosa migliore da fare in questa situazione è quella di +andare avanti e tenere la comunità informata mentre procedete. + +Ottenere riscontri ufficiali +---------------------------- + +Se il vostro lavoro è stato svolto in un ambiente aziendale - come molto +del lavoro fatto su Linux - dovete, ovviamente, avere il permesso dei +dirigenti prima che possiate pubblicare i progetti, o il codice aziendale, +su una lista di discussione pubblica. La pubblicazione di codice che non +è stato rilascio espressamente con licenza GPL-compatibile può rivelarsi +problematico; prima la dirigenza, e il personale legale, troverà una decisione +sulla pubblicazione di un progetto, meglio sarà per tutte le persone coinvolte. + +A questo punto, alcuni lettori potrebbero pensare che il loro lavoro sul +kernel è preposto a supportare un prodotto che non è ancora ufficialmente +riconosciuto. Rivelare le intenzioni dei propri datori di lavori in una +lista di discussione pubblica potrebbe non essere una soluzione valida. +In questi casi, vale la pena considerare se la segretezza sia necessaria +o meno; spesso non c'è una reale necessità di mantenere chiusi i progetti di +sviluppo. + +Detto ciò, ci sono anche casi dove l'azienda legittimamente non può rivelare +le proprie intenzioni in anticipo durante il processo di sviluppo. Le aziende +che hanno sviluppatori kernel esperti possono scegliere di procedere a +carte coperte partendo dall'assunto che saranno in grado di evitare, o gestire, +in futuro, eventuali problemi d'integrazione. Per le aziende senza questo tipo +di esperti, la migliore opzione è spesso quella di assumere uno sviluppatore +esterno che revisioni i progetti con un accordo di segretezza. +La Linux Foundation applica un programma di NDA creato appositamente per +aiutare le aziende in questa particolare situazione; potrete trovare più +informazioni sul sito: + + http://www.linuxfoundation.org/en/NDA_program + +Questa tipologia di revisione è spesso sufficiente per evitare gravi problemi +senza che sia richiesta l'esposizione pubblica del progetto. diff --git a/Documentation/translations/it_IT/process/4.Coding.rst b/Documentation/translations/it_IT/process/4.Coding.rst new file mode 100644 index 000000000000..c61059015e52 --- /dev/null +++ b/Documentation/translations/it_IT/process/4.Coding.rst @@ -0,0 +1,447 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/4.Coding.rst <development_coding>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_development_coding: + +Scrivere codice corretto +======================== + +Nonostante ci sia molto da dire sul processo di creazione, sulla sua solidità +e sul suo orientamento alla comunità, la prova di ogni progetto di sviluppo +del kernel si trova nel codice stesso. È il codice che sarà esaminato dagli +altri sviluppatori ed inserito (o no) nel ramo principale. Quindi è la +qualità di questo codice che determinerà il successo finale del progetto. + +Questa sezione esaminerà il processo di codifica. Inizieremo con uno sguardo +sulle diverse casistiche nelle quali gli sviluppatori kernel possono +sbagliare. Poi, l'attenzione si sposterà verso "il fare le cose +correttamente" e sugli strumenti che possono essere utili in questa missione. + +Trappole +-------- + +Lo stile del codice +******************* + +Il kernel ha da tempo delle norme sullo stile di codifica che sono descritte in +:ref:`Documentation/translations/it_IT/process/coding-style.rst <codingstyle>`. +Per la maggior parte del tempo, la politica descritta in quel file è stata +praticamente informativa. Ne risulta che ci sia una quantità sostanziale di +codice nel kernel che non rispetta le linee guida relative allo stile. +La presenza di quel codice conduce a due distinti pericoli per gli +sviluppatori kernel. + +Il primo di questi è credere che gli standard di codifica del kernel +non sono importanti e possono non essere applicati. La verità è che +aggiungere nuovo codice al kernel è davvero difficile se questo non +rispetta le norme; molti sviluppatori richiederanno che il codice sia +riformulato prima che anche solo lo revisionino. Una base di codice larga +quanto il kernel richiede una certa uniformità, in modo da rendere possibile +per gli sviluppatori una comprensione veloce di ogni sua parte. Non ci sono, +quindi, più spazi per un codice formattato alla carlona. + +Occasionalmente, lo stile di codifica del kernel andrà in conflitto con lo +stile richiesto da un datore di lavoro. In alcuni casi, lo stile del kernel +dovrà prevalere prima che il codice venga inserito. Mettere il codice +all'interno del kernel significa rinunciare a un certo grado di controllo +in differenti modi - incluso il controllo sul come formattare il codice. + +L’altra trappola è quella di pensare che il codice già presente nel kernel +abbia urgentemente bisogno di essere sistemato. Gli sviluppatori potrebbero +iniziare a generare patch che correggono lo stile come modo per prendere +famigliarità con il processo, o come modo per inserire i propri nomi nei +changelog del kernel – o entrambe. La comunità di sviluppo vede un attività +di codifica puramente correttiva come "rumore"; queste attività riceveranno +una fredda accoglienza. Di conseguenza è meglio evitare questo tipo di patch. +Mentre si lavora su un pezzo di codice è normale correggerne anche lo stile, +ma le modifiche di stile non dovrebbero essere fatte fini a se stesse. + +Il documento sullo stile del codice non dovrebbe essere letto come una legge +assoluta che non può mai essere trasgredita. Se c’è un a buona ragione +(per esempio, una linea che diviene poco leggibile se divisa per rientrare +nel limite di 80 colonne), fatelo e basta. + +Notate che potete utilizzare lo strumento “clang-format” per aiutarvi con +le regole, per una riformattazione automatica e veloce del vostro codice +e per revisionare interi file per individuare errori nello stile di codifica, +refusi e possibili miglioramenti. Inoltre è utile anche per classificare gli +``#includes``, per allineare variabili/macro, per testi derivati ed altri +compiti del genere. Consultate il file +:ref:`Documentation/translations/it_IT/process/clang-format.rst <clangformat>` +per maggiori dettagli + + +Livelli di astrazione +********************* + + +I professori di Informatica insegnano ai propri studenti a fare ampio uso dei +livelli di astrazione nel nome della flessibilità e del nascondere informazioni. +Certo il kernel fa un grande uso dell'astrazione; nessun progetto con milioni +di righe di codice potrebbe fare altrimenti e sopravvivere. Ma l'esperienza +ha dimostrato che un'eccessiva o prematura astrazione può rivelarsi dannosa +al pari di una prematura ottimizzazione. L'astrazione dovrebbe essere usata +fino al livello necessario e non oltre. + +Ad un livello base, considerate una funzione che ha un argomento che viene +sempre impostato a zero da tutti i chiamanti. Uno potrebbe mantenere +quell'argomento nell'eventualità qualcuno volesse sfruttare la flessibilità +offerta. In ogni caso, tuttavia, ci sono buone possibilità che il codice +che va ad implementare questo argomento aggiuntivo, sia stato rotto in maniera +sottile, in un modo che non è mai stato notato - perché non è mai stato usato. +Oppure, quando sorge la necessità di avere più flessibilità, questo argomento +non la fornisce in maniera soddisfacente. Gli sviluppatori di Kernel, +sottopongono costantemente patch che vanno a rimuovere gli argomenti +inutilizzate; anche se, in generale, non avrebbero dovuto essere aggiunti. + +I livelli di astrazione che nascondono l'accesso all'hardware - +spesso per poter usare dei driver su diversi sistemi operativi - vengono +particolarmente disapprovati. Tali livelli oscurano il codice e possono +peggiorare le prestazioni; essi non appartengono al kernel Linux. + +D'altro canto, se vi ritrovate a dover copiare una quantità significativa di +codice proveniente da un altro sottosistema del kernel, è tempo di chiedersi +se, in effetti, non avrebbe più senso togliere parte di quel codice e metterlo +in una libreria separata o di implementare quella funzionalità ad un livello +più elevato. Non c'è utilità nel replicare lo stesso codice per tutto +il kernel. + + +#ifdef e l'uso del preprocessore in generale +******************************************** + +Il preprocessore C sembra essere una fonte di attrazione per qualche +programmatore C, che ci vede una via per ottenere una grande flessibilità +all'interno di un file sorgente. Ma il preprocessore non è scritto in C, +e un suo massiccio impiego conduce a un codice che è molto più difficile +da leggere per gli altri e che rende più difficile il lavoro di verifica del +compilatore. L'uso eccessivo del preprocessore è praticamente sempre il segno +di un codice che necessita di un certo lavoro di pulizia. + +La compilazione condizionata con #ifdef è, in effetti, un potente strumento, +ed esso viene usato all'interno del kernel. Ma esiste un piccolo desiderio: +quello di vedere il codice coperto solo da una leggera spolverata di +blocchi #ifdef. Come regola generale, quando possibile, l'uso di #ifdef +dovrebbe essere confinato nei file d'intestazione. Il codice compilato +condizionatamente può essere confinato a funzioni tali che, nel caso in cui +il codice non deve essere presente, diventano vuote. Il compilatore poi +ottimizzerà la chiamata alla funzione vuota rimuovendola. Il risultato è +un codice molto più pulito, più facile da seguire. + +Le macro del preprocessore C presentano una serie di pericoli, inclusi +valutazioni multiple di espressioni che hanno effetti collaterali e non +garantiscono una sicurezza rispetto ai tipi. Se siete tentati dal definire +una macro, considerate l'idea di creare invece una funzione inline. Il codice +che ne risulterà sarà lo stesso, ma le funzioni inline sono più leggibili, +non considerano i propri argomenti più volte, e permettono al compilatore di +effettuare controlli sul tipo degli argomenti e del valore di ritorno. + + +Funzioni inline +*************** + +Comunque, anche le funzioni inline hanno i loro pericoli. I programmatori +potrebbero innamorarsi dell'efficienza percepita derivata dalla rimozione +di una chiamata a funzione. Queste funzioni, tuttavia, possono ridurre le +prestazioni. Dato che il loro codice viene replicato ovunque vi sia una +chiamata ad esse, si finisce per gonfiare le dimensioni del kernel compilato. +Questi, a turno, creano pressione sulla memoria cache del processore, e questo +può causare rallentamenti importanti. Le funzioni inline, di norma, dovrebbero +essere piccole e usate raramente. Il costo di una chiamata a funzione, dopo +tutto, non è così alto; la creazione di molte funzioni inline è il classico +esempio di un'ottimizzazione prematura. + +In generale, i programmatori del kernel ignorano gli effetti della cache a +loro rischio e pericolo. Il classico compromesso tempo/spazio teorizzato +all'inizio delle lezioni sulle strutture dati spesso non si applica +all'hardware moderno. Lo spazio *è* tempo, in questo senso un programma +più grande sarà più lento rispetto ad uno più compatto. + +I compilatori più recenti hanno preso un ruolo attivo nel decidere se +una data funzione deve essere resa inline oppure no. Quindi l'uso +indiscriminato della parola chiave "inline" potrebbe non essere non solo +eccessivo, ma anche irrilevante. + +Sincronizzazione +**************** + +Nel maggio 2006, il sistema di rete "Devicescape" fu rilasciato in pompa magna +sotto la licenza GPL e reso disponibile per la sua inclusione nella ramo +principale del kernel. Questa donazione fu una notizia bene accolta; +il supporto per le reti senza fili era considerata, nel migliore dei casi, +al di sotto degli standard; il sistema Deviscape offrì la promessa di una +risoluzione a tale situazione. Tuttavia, questo codice non fu inserito nel +ramo principale fino al giugno del 2007 (2.6.22). Cosa accadde? + +Quel codice mostrava numerosi segnali di uno sviluppo in azienda avvenuto +a porte chiuse. Ma in particolare, un grosso problema fu che non fu +progettato per girare in un sistema multiprocessore. Prima che questo +sistema di rete (ora chiamato mac80211) potesse essere inserito, fu necessario +un lavoro sugli schemi di sincronizzazione. + +Una volta, il codice del kernel Linux poteva essere sviluppato senza pensare +ai problemi di concorrenza presenti nei sistemi multiprocessore. Ora, +comunque, questo documento è stato scritto su di un portatile dual-core. +Persino su sistemi a singolo processore, il lavoro svolto per incrementare +la capacità di risposta aumenterà il livello di concorrenza interno al kernel. +I giorni nei quali il codice poteva essere scritto senza pensare alla +sincronizzazione sono da passati tempo. + +Ogni risorsa (strutture dati, registri hardware, etc.) ai quali si potrebbe +avere accesso simultaneo da più di un thread deve essere sincronizzato. Il +nuovo codice dovrebbe essere scritto avendo tale accortezza in testa; +riadattare la sincronizzazione a posteriori è un compito molto più difficile. +Gli sviluppatori del kernel dovrebbero prendersi il tempo di comprendere bene +le primitive di sincronizzazione, in modo da sceglier lo strumento corretto +per eseguire un compito. Il codice che presenta una mancanza di attenzione +alla concorrenza avrà un percorso difficile all'interno del ramo principale. + +Regressioni +*********** + +Vale la pena menzionare un ultimo pericolo: potrebbe rivelarsi accattivante +l'idea di eseguire un cambiamento (che potrebbe portare a grandi +miglioramenti) che porterà ad alcune rotture per gli utenti esistenti. +Questa tipologia di cambiamento è chiamata "regressione", e le regressioni son +diventate mal viste nel ramo principale del kernel. Con alcune eccezioni, +i cambiamenti che causano regressioni saranno fermati se quest'ultime non +potranno essere corrette in tempo utile. È molto meglio quindi evitare +la regressione fin dall'inizio. + +Spesso si è argomentato che una regressione può essere giustificata se essa +porta risolve più problemi di quanti non ne crei. Perché, dunque, non fare +un cambiamento se questo porta a nuove funzionalità a dieci sistemi per +ognuno dei quali esso determina una rottura? La migliore risposta a questa +domanda ci è stata fornita da Linus nel luglio 2007: + +:: + Dunque, noi non sistemiamo bachi introducendo nuovi problemi. Quella + via nasconde insidie, e nessuno può sapere del tutto se state facendo + dei progressi reali. Sono due passi avanti e uno indietro, oppure + un passo avanti e due indietro? + +(http://lwn.net/Articles/243460/). + +Una particolare tipologia di regressione mal vista consiste in una qualsiasi +sorta di modifica all'ABI dello spazio utente. Una volta che un'interfaccia +viene esportata verso lo spazio utente, dev'essere supportata all'infinito. +Questo fatto rende la creazione di interfacce per lo spazio utente +particolarmente complicato: dato che non possono venir cambiate introducendo +incompatibilità, esse devono essere fatte bene al primo colpo. Per questa +ragione sono sempre richieste: ampie riflessioni, documentazione chiara e +ampie revisioni dell'interfaccia verso lo spazio utente. + + +Strumenti di verifica del codice +-------------------------------- +Almeno per ora la scrittura di codice priva di errori resta un ideale +irraggiungibile ai più. Quello che speriamo di poter fare, tuttavia, è +trovare e correggere molti di questi errori prima che il codice entri nel +ramo principale del kernel. A tal scopo gli sviluppatori del kernel devono +mettere insieme una schiera impressionante di strumenti che possano +localizzare automaticamente un'ampia varietà di problemi. Qualsiasi problema +trovato dal computer è un problema che non affliggerà l'utente in seguito, +ne consegue che gli strumenti automatici dovrebbero essere impiegati ovunque +possibile. + +Il primo passo consiste semplicemente nel fare attenzione agli avvertimenti +proveniente dal compilatore. Versioni moderne di gcc possono individuare +(e segnalare) un gran numero di potenziali errori. Molto spesso, questi +avvertimenti indicano problemi reali. Di regola, il codice inviato per la +revisione non dovrebbe produrre nessun avvertimento da parte del compilatore. +Per mettere a tacere gli avvertimenti, cercate di comprenderne le cause reali +e cercate di evitare le "riparazioni" che fan sparire l'avvertimento senza +però averne trovato la causa. + +Tenete a mente che non tutti gli avvertimenti sono disabilitati di default. +Costruite il kernel con "make EXTRA_CFLAGS=-W" per ottenerli tutti. + +Il kernel fornisce differenti opzioni che abilitano funzionalità di debugging; +molti di queste sono trovano all'interno del sotto menu "kernel hacking". +La maggior parte di queste opzioni possono essere attivate per qualsiasi +kernel utilizzato per lo sviluppo o a scopo di test. In particolare dovreste +attivare: + + - ENABLE_WARN_DEPRECATED, ENABLE_MUST_CHECK, e FRAME_WARN per ottenere degli + avvertimenti dedicati a problemi come l'uso di interfacce deprecate o + l'ignorare un importante valore di ritorno di una funzione. Il risultato + generato da questi avvertimenti può risultare verboso, ma non bisogna + preoccuparsi per gli avvertimenti provenienti da altre parti del kernel. + + - DEBUG_OBJECTS aggiungerà un codice per tracciare il ciclo di vita di + diversi oggetti creati dal kernel e avvisa quando qualcosa viene eseguito + fuori controllo. Se state aggiungendo un sottosistema che crea (ed + esporta) oggetti complessi propri, considerate l'aggiunta di un supporto + al debugging dell'oggetto. + + - DEBUG_SLAB può trovare svariati errori di uso e di allocazione di memoria; + esso dovrebbe esser usato dalla maggior parte dei kernel di sviluppo. + + - DEBUG_SPINLOCK, DEBUG_ATOMIC_SLEEP, e DEBUG_MUTEXES troveranno un certo + numero di errori comuni di sincronizzazione. + +Esistono ancora delle altre opzioni di debugging, di alcune di esse +discuteremo qui sotto. Alcune di esse hanno un forte impatto e non dovrebbero +essere usate tutte le volte. Ma qualche volta il tempo speso nell'capire +le opzioni disponibili porterà ad un risparmio di tempo nel breve termine. + +Uno degli strumenti di debugging più tosti è il *locking checker*, o +"lockdep". Questo strumento traccerà qualsiasi acquisizione e rilascio di +ogni *lock* (spinlock o mutex) nel sistema, l'ordine con il quale i *lock* +sono acquisiti in relazione l'uno con l'altro, l'ambiente corrente di +interruzione, eccetera. Inoltre esso può assicurare che i *lock* vengano +acquisiti sempre nello stesso ordine, che le stesse assunzioni sulle +interruzioni si applichino in tutte le occasioni, e così via. In altre parole, +lockdep può scovare diversi scenari nei quali il sistema potrebbe, in rari +casi, trovarsi in stallo. Questa tipologia di problema può essere grave +(sia per gli sviluppatori che per gli utenti) in un sistema in uso; lockdep +permette di trovare tali problemi automaticamente e in anticipo. + +In qualità di programmatore kernel diligente, senza dubbio, dovrete controllare +il valore di ritorno di ogni operazione (come l'allocazione della memoria) +poiché esso potrebbe fallire. Il nocciolo della questione è che i percorsi +di gestione degli errori, con grande probabilità, non sono mai stati +collaudati del tutto. Il codice collaudato tende ad essere codice bacato; +potrete quindi essere più a vostro agio con il vostro codice se tutti questi +percorsi fossero stati verificati un po' di volte. + +Il kernel fornisce un framework per l'inserimento di fallimenti che fa +esattamente al caso, specialmente dove sono coinvolte allocazioni di memoria. +Con l'opzione per l'inserimento dei fallimenti abilitata, una certa percentuale +di allocazione di memoria sarà destinata al fallimento; questi fallimenti +possono essere ridotti ad uno specifico pezzo di codice. Procedere con +l'inserimento dei fallimenti attivo permette al programmatore di verificare +come il codice risponde quando le cose vanno male. Consultate: +Documentation/fault-injection/fault-injection.txt per avere maggiori +informazioni su come utilizzare questo strumento. + +Altre tipologie di errori possono essere riscontrati con lo strumento di +analisi statica "sparse". Con Sparse, il programmatore può essere avvisato +circa la confusione tra gli indirizzi dello spazio utente e dello spazio +kernel, un miscuglio fra quantità big-endian e little-endian, il passaggio +di un valore intero dove ci sia aspetta un gruppo di flag, e così via. +Sparse deve essere installato separatamente (se il vostra distribuzione non +lo prevede, potete trovarlo su https://sparse.wiki.kernel.org/index.php/Main_Page); +può essere attivato sul codice aggiungendo "C=1" al comando make. + +Lo strumento "Coccinelle" (http://coccinelle.lip6.fr/) è in grado di trovare +una vasta varietà di potenziali problemi di codifica; e può inoltre proporre +soluzioni per risolverli. Un buon numero di "patch semantiche" per il kernel +sono state preparate nella cartella scripts/coccinelle; utilizzando +"make coccicheck" esso percorrerà tali patch semantiche e farà rapporto su +qualsiasi problema trovato. Per maggiori informazioni, consultate +:ref:`Documentation/dev-tools/coccinelle.rst <devtools_coccinelle>`. + +Altri errori di portabilità sono meglio scovati compilando il vostro codice +per altre architetture. Se non vi accade di avere un sistema S/390 o una +scheda di sviluppo Blackfin sotto mano, potete comunque continuare la fase +di compilazione. Un vasto numero di cross-compilatori per x86 possono +essere trovati al sito: + + http://www.kernel.org/pub/tools/crosstool/ + +Il tempo impiegato nell'installare e usare questi compilatori sarà d'aiuto +nell'evitare situazioni imbarazzanti nel futuro. + + +Documentazione +-------------- + +La documentazione è spesso stata più un'eccezione che una regola nello +sviluppo del kernel. Nonostante questo, un'adeguata documentazione aiuterà +a facilitare l'inserimento di nuovo codice nel kernel, rende la vita più +facile per gli altri sviluppatori e sarà utile per i vostri utenti. In molti +casi, la documentazione è divenuta sostanzialmente obbligatoria. + +La prima parte di documentazione per qualsiasi patch è il suo changelog. +Questi dovrebbero descrivere le problematiche risolte, la tipologia di +soluzione, le persone che lavorano alla patch, ogni effetto rilevante +sulle prestazioni e tutto ciò che può servire per la comprensione della +patch. Assicuratevi che il changelog dica *perché*, vale la pena aggiungere +la patch; un numero sorprendente di sviluppatori sbaglia nel fornire tale +informazione. + +Qualsiasi codice che aggiunge una nuova interfaccia in spazio utente - inclusi +nuovi file in sysfs o /proc - dovrebbe includere la documentazione di tale +interfaccia così da permette agli sviluppatori dello spazio utente di sapere +con cosa stanno lavorando. Consultate: Documentation/ABI/README per avere una +descrizione di come questi documenti devono essere impostati e quali +informazioni devono essere fornite. + +Il file :ref:`Documentation/translations/it_IT/admin-guide/kernel-parameters.rst <kernelparameters>` +descrive tutti i parametri di avvio del kernel. Ogni patch che aggiunga +nuovi parametri dovrebbe aggiungere nuove voci a questo file. + +Ogni nuova configurazione deve essere accompagnata da un testo di supporto +che spieghi chiaramente le opzioni e spieghi quando l'utente potrebbe volerle +selezionare. + +Per molti sottosistemi le informazioni sull'API interna sono documentate sotto +forma di commenti formattati in maniera particolare; questi commenti possono +essere estratti e formattati in differenti modi attraverso lo script +"kernel-doc". Se state lavorando all'interno di un sottosistema che ha +commenti kerneldoc dovreste mantenerli e aggiungerli, in maniera appropriata, +per le funzioni disponibili esternamente. Anche in aree che non sono molto +documentate, non c'è motivo per non aggiungere commenti kerneldoc per il +futuro; infatti, questa può essere un'attività utile per sviluppatori novizi +del kernel. Il formato di questi commenti, assieme alle informazione su come +creare modelli per kerneldoc, possono essere trovati in +:ref:`Documentation/translations/it_IT/doc-guide/ <doc_guide>`. + +Chiunque legga un ammontare significativo di codice kernel noterà che, spesso, +i commenti si fanno maggiormente notare per la loro assenza. Ancora una volta, +le aspettative verso il nuovo codice sono più alte rispetto al passato; +inserire codice privo di commenti sarà più difficile. Detto ciò, va aggiunto +che non si desiderano commenti prolissi per il codice. Il codice dovrebbe +essere, di per sé, leggibile, con dei commenti che spieghino gli aspetti più +sottili. + +Determinate cose dovrebbero essere sempre commentate. L'uso di barriere +di memoria dovrebbero essere accompagnate da una riga che spieghi perché sia +necessaria. Le regole di sincronizzazione per le strutture dati, generalmente, +necessitano di una spiegazioni da qualche parte. Le strutture dati più +importanti, in generale, hanno bisogno di una documentazione onnicomprensiva. +Le dipendenze che non sono ovvie tra bit separati di codice dovrebbero essere +indicate. Tutto ciò che potrebbe indurre un inserviente del codice a fare +una "pulizia" incorretta, ha bisogno di un commento che dica perché è stato +fatto in quel modo. E così via. + +Cambiamenti interni dell'API +---------------------------- + +L'interfaccia binaria fornita dal kernel allo spazio utente non può essere +rotta tranne che in circostanze eccezionali. L'interfaccia di programmazione +interna al kernel, invece, è estremamente fluida e può essere modificata al +bisogno. Se vi trovate a dover lavorare attorno ad un'API del kernel o +semplicemente non state utilizzando una funzionalità offerta perché questa +non rispecchia i vostri bisogni, allora questo potrebbe essere un segno che +l'API ha bisogno di essere cambiata. In qualità di sviluppatore del kernel, +hai il potere di fare questo tipo di modifica. + +Ci sono ovviamente alcuni punti da cogliere. I cambiamenti API possono essere +fatti, ma devono essere giustificati. Quindi ogni patch che porta ad una +modifica dell'API interna dovrebbe essere accompagnata da una descrizione +della modifica in sé e del perché essa è necessaria. Questo tipo di +cambiamenti dovrebbero, inoltre, essere fatti in una patch separata, invece di +essere sepolti all'interno di una patch più grande. + +L'altro punto da cogliere consiste nel fatto che uno sviluppatore che +modifica l'API deve, in generale, essere responsabile della correzione +di tutto il codice del kernel che viene rotto per via della sua modifica. +Per una funzione ampiamente usata, questo compito può condurre letteralmente +a centinaia o migliaia di modifiche, molte delle quali sono in conflitto con +il lavoro svolto da altri sviluppatori. Non c'è bisogno di dire che questo +può essere un lavoro molto grosso, quindi è meglio essere sicuri che la +motivazione sia ben solida. Notate che lo strumento Coccinelle può fornire +un aiuto con modifiche estese dell'API. + +Quando viene fatta una modifica API incompatibile, una persona dovrebbe, +quando possibile, assicurarsi che quel codice non aggiornato sia trovato +dal compilatore. Questo vi aiuterà ad essere sicuri d'avere trovato, +tutti gli usi di quell'interfaccia. Inoltre questo avviserà gli sviluppatori +di codice fuori dal kernel che c'è un cambiamento per il quale è necessario del +lavoro. Il supporto al codice fuori dal kernel non è qualcosa di cui gli +sviluppatori del kernel devono preoccuparsi, ma non dobbiamo nemmeno rendere +più difficile del necessario la vita agli sviluppatori di questo codice. diff --git a/Documentation/translations/it_IT/process/5.Posting.rst b/Documentation/translations/it_IT/process/5.Posting.rst new file mode 100644 index 000000000000..b979266aa884 --- /dev/null +++ b/Documentation/translations/it_IT/process/5.Posting.rst @@ -0,0 +1,348 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/5.Posting.rst <development_posting>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_development_posting: + +Pubblicare modifiche +==================== + +Prima o poi arriva il momento in cui il vostro lavoro è pronto per essere +presentato alla comunità per una revisione ed eventualmente per la sua +inclusione nel ramo principale del kernel. Com'era prevedibile, +la comunità di sviluppo del kernel ha elaborato un insieme di convenzioni +e di procedure per la pubblicazione delle patch; seguirle renderà la vita +più facile a tutti quanti. Questo documento cercherà di coprire questi +argomenti con un ragionevole livello di dettaglio; più informazioni possono +essere trovare nella cartella 'Documentation', nei file +:ref:`translations/it_IT/process/submitting-patches.rst <it_submittingpatches>`, +:ref:`translations/it_IT/process/submitting-drivers.rst <it_submittingdrivers>`, e +:ref:`translations/it_IT/process/submit-checklist.rst <it_submitchecklist>`. + + +Quando pubblicarle +------------------ + +C'è sempre una certa resistenza nel pubblicare patch finché non sono +veramente "pronte". Per semplici patch questo non è un problema. +Ma quando il lavoro è di una certa complessità, c'è molto da guadagnare +dai riscontri che la comunità può darvi prima che completiate il lavoro. +Dovreste considerare l'idea di pubblicare un lavoro incompleto, o anche +preparare un ramo git disponibile agli sviluppatori interessati, cosicché +possano stare al passo col vostro lavoro in qualunque momento. + +Quando pubblicate del codice che non è considerato pronto per l'inclusione, +è bene che lo diciate al momento della pubblicazione. Inoltre, aggiungete +informazioni sulle cose ancora da sviluppare e sui problemi conosciuti. +Poche persone guarderanno delle patch che si sa essere fatte a metà, +ma quelli che lo faranno penseranno di potervi aiutare a condurre il vostro +sviluppo nella giusta direzione. + + +Prima di creare patch +--------------------- + +Ci sono un certo numero di cose che dovreste fare prima di considerare +l'invio delle patch alla comunità di sviluppo. Queste cose includono: + + - Verificare il codice fino al massimo che vi è consentito. Usate gli + strumenti di debug del kernel, assicuratevi che il kernel compili con + tutte le più ragionevoli combinazioni d'opzioni, usate cross-compilatori + per compilare il codice per differenti architetture, eccetera. + + - Assicuratevi che il vostro codice sia conforme alla linee guida del + kernel sullo stile del codice. + + - La vostra patch ha delle conseguenze in termini di prestazioni? + Se è così, dovreste eseguire dei *benchmark* che mostrino il loro + impatto (anche positivo); un riassunto dei risultati dovrebbe essere + incluso nella patch. + + - Siate certi d'avere i diritti per pubblicare il codice. Se questo + lavoro è stato fatto per un datore di lavoro, egli avrà dei diritti su + questo lavoro e dovrà quindi essere d'accordo alla sua pubblicazione + con una licenza GPL + +Come regola generale, pensarci un po' di più prima di inviare il codice +ripaga quasi sempre lo sforzo. + + +Preparazione di una patch +------------------------- + +La preparazione delle patch per la pubblicazione può richiedere una quantità +di lavoro significativa, ma, ripetiamolo ancora, generalmente sconsigliamo +di risparmiare tempo in questa fase, anche sul breve periodo. + +Le patch devono essere preparate per una specifica versione del kernel. +Come regola generale, una patch dovrebbe basarsi sul ramo principale attuale +così come lo si trova nei sorgenti git di Linus. Quando vi basate sul ramo +principale, cominciate da un punto di rilascio ben noto - uno stabile o +un -rc - piuttosto che creare il vostro ramo da quello principale in un punto +a caso. + +Per facilitare una revisione e una verifica più estesa, potrebbe diventare +necessaria la produzione di versioni per -mm, linux-next o i sorgenti di un +sottosistema. Basare questa patch sui suddetti sorgenti potrebbe richiedere +un lavoro significativo nella risoluzione dei conflitti e nella correzione dei +cambiamenti di API; questo potrebbe variare a seconda dell'area d'interesse +della vostra patch e da quello che succede altrove nel kernel. + +Solo le modifiche più semplici dovrebbero essere preparate come una singola +patch; tutto il resto dovrebbe essere preparato come una serie logica di +modifiche. Spezzettare le patch è un po' un'arte; alcuni sviluppatori +passano molto tempo nel capire come farlo in modo che piaccia alla comunità. +Ci sono alcune regole spannometriche, che comunque possono aiutare +considerevolmente: + + - La serie di patch che pubblicherete, quasi sicuramente, non sarà + come quella che trovate nel vostro sistema di controllo di versione. + Invece, le vostre modifiche dovranno essere considerate nella loro forma + finale, e quindi separate in parti che abbiano un senso. Gli sviluppatori + sono interessati in modifiche che siano discrete e indipendenti, non + alla strada che avete percorso per ottenerle. + + - Ogni modifica logicamente indipendente dovrebbe essere preparata come una + patch separata. Queste modifiche possono essere piccole ("aggiunto un + campo in questa struttura") o grandi (l'aggiunta di un driver nuovo, + per esempio), ma dovrebbero essere concettualmente piccole da permettere + una descrizione in una sola riga. Ogni patch dovrebbe fare modifiche + specifiche che si possano revisionare indipendentemente e di cui si possa + verificare la veridicità. + + - Giusto per riaffermare quando detto sopra: non mischiate diversi tipi di + modifiche nella stessa patch. Se una modifica corregge un baco critico + per la sicurezza, riorganizza alcune strutture, e riformatta il codice, + ci sono buone probabilità che venga ignorata e che la correzione importante + venga persa. + + - Ogni modifica dovrebbe portare ad un kernel che compila e funziona + correttamente; se la vostra serie di patch si interrompe a metà il + risultato dovrebbe essere comunque un kernel funzionante. L'applicazione + parziale di una serie di patch è uno scenario comune nel quale il + comando "git bisect" viene usato per trovare delle regressioni; se il + risultato è un kernel guasto, renderete la vita degli sviluppatori più + difficile così come quella di chi s'impegna nel nobile lavoro di + scovare i problemi. + + - Però, non strafate. Una volta uno sviluppatore pubblicò una serie di 500 + patch che modificavano un unico file - un atto che non lo rese la persona + più popolare sulla lista di discussione del kernel. Una singola patch + può essere ragionevolmente grande fintanto che contenga un singolo + cambiamento *logico*. + + - Potrebbe essere allettante l'idea di aggiungere una nuova infrastruttura + come una serie di patch, ma di lasciare questa infrastruttura inutilizzata + finché l'ultima patch della serie non abilita tutto quanto. Quando è + possibile, questo dovrebbe essere evitato; se questa serie aggiunge delle + regressioni, "bisect" indicherà quest'ultima patch come causa del + problema anche se il baco si trova altrove. Possibilmente, quando una + patch aggiunge del nuovo codice dovrebbe renderlo attivo immediatamente. + +Lavorare per creare la serie di patch perfetta potrebbe essere frustrante +perché richiede un certo tempo e soprattutto dopo che il "vero lavoro" è +già stato fatto. Quando ben fatto, comunque, è tempo ben speso. + + +Formattazione delle patch e i changelog +--------------------------------------- + +Quindi adesso avete una serie perfetta di patch pronte per la pubblicazione, +ma il lavoro non è davvero finito. Ogni patch deve essere preparata con +un messaggio che spieghi al resto del mondo, in modo chiaro e veloce, +il suo scopo. Per ottenerlo, ogni patch sarà composta dai seguenti elementi: + + - Un campo opzionale "From" col nome dell'autore della patch. Questa riga + è necessaria solo se state passando la patch di qualcun altro via email, + ma nel dubbio non fa di certo male aggiungerlo. + + - Una descrizione di una riga che spieghi cosa fa la patch. Questo + messaggio dovrebbe essere sufficiente per far comprendere al lettore lo + scopo della patch senza altre informazioni. Questo messaggio, + solitamente, presenta in testa il nome del sottosistema a cui si riferisce, + seguito dallo scopo della patch. Per esempio: + + :: + + gpio: fix build on CONFIG_GPIO_SYSFS=n + + - Una riga bianca seguita da una descrizione dettagliata della patch. + Questa descrizione può essere lunga tanto quanto serve; dovrebbe spiegare + cosa fa e perché dovrebbe essere aggiunta al kernel. + + - Una o più righe etichette, con, minimo, una riga *Signed-off-by:* + col nome dall'autore della patch. Queste etichette verranno descritte + meglio più avanti. + +Gli elementi qui sopra, assieme, formano il changelog di una patch. +Scrivere un buon changelog è cruciale ma è spesso un'arte trascurata; +vale la pena spendere qualche parola in più al riguardo. Quando scrivete +un changelog dovreste tenere ben presente che molte persone leggeranno +le vostre parole. Queste includono i manutentori di un sotto-sistema, e i +revisori che devono decidere se la patch debba essere inclusa o no, +le distribuzioni e altri manutentori che cercano di valutare se la patch +debba essere applicata su kernel più vecchi, i cacciatori di bachi che si +chiederanno se la patch è la causa di un problema che stanno cercando, +gli utenti che vogliono sapere com'è cambiato il kernel, e molti altri. +Un buon changelog fornisce le informazioni necessarie a tutte queste +persone nel modo più diretto e conciso possibile. + +A questo scopo, la riga riassuntiva dovrebbe descrivere gli effetti della +modifica e la motivazione della patch nel modo migliore possibile nonostante +il limite di una sola riga. La descrizione dettagliata può spiegare meglio +i temi e fornire maggiori informazioni. Se una patch corregge un baco, +citate, se possibile, il commit che lo introdusse (e per favore, quando +citate un commit aggiungete sia il suo identificativo che il titolo), +Se il problema è associabile ad un file di log o all' output del compilatore, +includeteli al fine d'aiutare gli altri a trovare soluzioni per lo stesso +problema. Se la modifica ha lo scopo di essere di supporto a sviluppi +successivi, ditelo. Se le API interne vengono cambiate, dettagliate queste +modifiche e come gli altri dovrebbero agire per applicarle. In generale, +più riuscirete ad entrare nei panni di tutti quelli che leggeranno il +vostro changelog, meglio sarà il changelog (e il kernel nel suo insieme). + +Non serve dirlo, un changelog dovrebbe essere il testo usato nel messaggio +di commit in un sistema di controllo di versione. Sarà seguito da: + + - La patch stessa, nel formato unificato per patch ("-u"). Usare + l'opzione "-p" assocerà alla modifica il nome della funzione alla quale + si riferisce, rendendo il risultato più facile da leggere per gli altri. + +Dovreste evitare di includere nelle patch delle modifiche per file +irrilevanti (quelli generati dal processo di generazione, per esempio, o i file +di backup del vostro editor). Il file "dontdiff" nella cartella Documentation +potrà esservi d'aiuto su questo punto; passatelo a diff con l'opzione "-X". + +Le etichette sopra menzionante sono usate per descrivere come i vari +sviluppatori sono stati associati allo sviluppo di una patch. Sono descritte +in dettaglio nel documento :ref:`translations/it_IT/process/submitting-patches.rst <it_submittingpatches>`; +quello che segue è un breve riassunto. Ognuna di queste righe ha il seguente +formato: + +:: + + tag: Full Name <email address> optional-other-stuff + +Le etichette in uso più comuni sono: + + - Signed-off-by: questa è la certificazione che lo sviluppatore ha il diritto + di sottomettere la patch per l'integrazione nel kernel. Questo rappresenta + il consenso verso il certificato d'origine degli sviluppatori, il testo + completo potrà essere trovato in + :ref:`Documentation/translations/it_IT/process/submitting-patches.rst <it_submittingpatches>`. + Codice che non presenta una firma appropriata non potrà essere integrato. + + - Co-developed-by: indica che la patch è stata sviluppata anche da un altro + sviluppatore assieme all'autore originale. Questo è utile quando più + persone lavorano sulla stessa patch. Da notare che questa persona deve + avere anche una riga "Signed-off-by:" nella patch. + + - Acked-by: indica il consenso di un altro sviluppatore (spesso il manutentore + del codice in oggetto) all'integrazione della patch nel kernel. + + - Tested-by: menziona la persona che ha verificato la patch e l'ha trovata + funzionante. + + - Reviwed-by: menziona lo sviluppatore che ha revisionato la patch; per + maggiori dettagli leggete la dichiarazione dei revisori in + :ref:`Documentation/translations/it_IT/process/submitting-patches.rst <it_submittingpatches>` + + - Reported-by: menziona l'utente che ha riportato il problema corretto da + questa patch; quest'etichetta viene usata per dare credito alle persone + che hanno verificato il codice e ci hanno fatto sapere quando le cose non + funzionavano correttamente. + + - Cc: la persona menzionata ha ricevuto una copia della patch ed ha avuto + l'opportunità di commentarla. + +State attenti ad aggiungere queste etichette alla vostra patch: solo +"Cc:" può essere aggiunta senza il permesso esplicito della persona menzionata. + +Inviare la modifica +------------------- + +Prima di inviare la vostra patch, ci sarebbero ancora un paio di cose di cui +dovreste aver cura: + + - Siete sicuri che il vostro programma di posta non corromperà le patch? + Le patch che hanno spazi bianchi in libertà o andate a capo aggiunti + dai programmi di posta non funzioneranno per chi le riceve, e spesso + non verranno nemmeno esaminate in dettaglio. Se avete un qualsiasi dubbio, + inviate la patch a voi stessi e verificate che sia integra. + + :ref:`Documentation/translations/it_IT/process/email-clients.rst <it_email_clients>` + contiene alcuni suggerimenti utili sulla configurazione dei programmi + di posta al fine di inviare patch. + + - Siete sicuri che la vostra patch non contenga sciocchi errori? Dovreste + sempre processare le patch con scripts/checkpatch.pl e correggere eventuali + problemi riportati. Per favore tenete ben presente che checkpatch.pl non è + più intelligente di voi, nonostante sia il risultato di un certa quantità di + ragionamenti su come debba essere una patch per il kernel. Se seguire + i suggerimenti di checkpatch.pl rende il codice peggiore, allora non fatelo. + +Le patch dovrebbero essere sempre inviate come testo puro. Per favore non +inviatele come allegati; questo rende molto più difficile, per i revisori, +citare parti della patch che si vogliono commentare. Invece, mettete la vostra +patch direttamente nel messaggio. + +Quando inviate le patch, è importante inviarne una copia a tutte le persone che +potrebbero esserne interessate. Al contrario di altri progetti, il kernel +incoraggia le persone a peccare nell'invio di tante copie; non presumente che +le persone interessate vedano i vostri messaggi sulla lista di discussione. +In particolare le copie dovrebbero essere inviate a: + + - I manutentori dei sottosistemi affetti della modifica. Come descritto + in precedenza, il file MAINTAINERS è il primo luogo dove cercare i nomi + di queste persone. + + - Altri sviluppatori che hanno lavorato nello stesso ambiente - specialmente + quelli che potrebbero lavorarci proprio ora. Usate git potrebbe essere + utile per vedere chi altri ha modificato i file su cui state lavorando. + + - Se state rispondendo a un rapporto su un baco, o a una richiesta di + funzionalità, includete anche gli autori di quei rapporti/richieste. + + - Inviate una copia alle liste di discussione interessate, o, se nient'altro + è adatto, alla lista linux-kernel + + - Se state correggendo un baco, pensate se la patch dovrebbe essere inclusa + nel prossimo rilascio stabile. Se è così, la lista di discussione + stable@vger.kernel.org dovrebbe riceverne una copia. Aggiungete anche + l'etichetta "Cc: stable@vger.kernel.org" nella patch stessa; questo + permetterà alla squadra *stable* di ricevere una notifica quando questa + correzione viene integrata nel ramo principale. + +Quando scegliete i destinatari della patch, è bene avere un'idea di chi +pensiate che sia colui che, eventualmente, accetterà la vostra patch e +la integrerà. Nonostante sia possibile inviare patch direttamente a +Linus Torvalds, e lasciare che sia lui ad integrarle,solitamente non è la +strada migliore da seguire. Linus è occupato, e ci sono dei manutentori di +sotto-sistema che controllano una parte specifica del kernel. Solitamente, +vorreste che siano questi manutentori ad integrare le vostre patch. Se non +c'è un chiaro manutentore, l'ultima spiaggia è spesso Andrew Morton. + +Le patch devono avere anche un buon oggetto. Il tipico formato per l'oggetto +di una patch assomiglia a questo: + +:: + + [PATCH nn/mm] subsys: one-line description of the patch + +dove "nn" è il numero ordinale della patch, "mm" è il numero totale delle patch +nella serie, e "subsys" è il nome del sottosistema interessato. Chiaramente, +nn/mm può essere omesso per una serie composta da una singola patch. + +Se avete una significative serie di patch, è prassi inviare una descrizione +introduttiva come parte zero. Tuttavia questa convenzione non è universalmente +seguita; se la usate, ricordate che le informazioni nell'introduzione non +faranno parte del changelog del kernel. Quindi per favore, assicuratevi che +ogni patch abbia un changelog completo. + +In generale, la seconda parte e quelle successive di una patch "composta" +dovrebbero essere inviate come risposta alla prima, cosicché vengano viste +come un unico *thread*. Strumenti come git e quilt hanno comandi per inviare +gruppi di patch con la struttura appropriata. Se avete una serie lunga +e state usando git, per favore state alla larga dall'opzione --chain-reply-to +per evitare di creare un annidamento eccessivo. diff --git a/Documentation/translations/it_IT/process/6.Followthrough.rst b/Documentation/translations/it_IT/process/6.Followthrough.rst new file mode 100644 index 000000000000..df7d5fb28832 --- /dev/null +++ b/Documentation/translations/it_IT/process/6.Followthrough.rst @@ -0,0 +1,240 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/6.Followthrough.rst <development_followthrough>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_development_followthrough: + +============= +Completamento +============= + +A questo punto, avete seguito le linee guida fino a questo punto e, con +l'aggiunta delle vostre capacità ingegneristiche, avete pubblicato una serie +perfetta di patch. Uno dei più grandi errori che possono essere commessi +persino da sviluppatori kernel esperti è quello di concludere che il +lavoro sia ormai finito. In verità, la pubblicazione delle patch +simboleggia una transizione alla fase successiva del processo, con, +probabilmente, ancora un po' di lavoro da fare. + +È raro che una modifica sia così bella alla sua prima pubblicazione che non +ci sia alcuno spazio di miglioramento. Il programma di sviluppo del kernel +riconosce questo fatto e quindi, è fortemente orientato al miglioramento +del codice pubblicato. Voi, in qualità di autori del codice, dovrete +lavorare con la comunità del kernel per assicurare che il vostro codice +mantenga gli standard qualitativi richiesti. Un fallimento in questo +processo è quasi come impedire l'inclusione delle vostre patch nel +ramo principale. + +Lavorare con i revisori +======================= + +Una patch che abbia una certa rilevanza avrà ricevuto numerosi commenti +da parte di altri sviluppatori dato che avranno revisionato il codice. +Lavorare con i revisori può rivelarsi, per molti sviluppatori, la parte +più intimidatoria del processo di sviluppo del kernel. La vita può esservi +resa molto più facile se tenete presente alcuni dettagli: + + - Se avete descritto la vostra modifica correttamente, i revisori ne + comprenderanno il valore e il perché vi siete presi il disturbo di + scriverla. Ma tale valore non li tratterrà dal porvi una domanda + fondamentale: come verrà mantenuto questo codice nel kernel nei prossimi + cinque o dieci anni? Molti dei cambiamenti che potrebbero esservi + richiesti - da piccoli problemi di stile a sostanziali ristesure - + vengono dalla consapevolezza che Linux resterà in circolazione e in + continuo sviluppo ancora per diverse decadi. + + - La revisione del codice è un duro lavoro, ed è un mestiere poco + riconosciuto; le persone ricordano chi ha scritto il codice, ma meno + fama è attribuita a chi lo ha revisionato. Quindi i revisori potrebbero + divenire burberi, specialmente quando vendono i medesimi errori venire + fatti ancora e ancora. Se ricevete una revisione che vi sembra abbia + un tono arrabbiato, insultante o addirittura offensivo, resistente alla + tentazione di rispondere a tono. La revisione riguarda il codice e non + la persona, e i revisori non vi stanno attaccando personalmente. + + - Similarmente, i revisori del codice non stanno cercando di promuovere + i loro interessi a vostre spese. Gli sviluppatori del kernel spesso si + aspettano di lavorare sul kernel per anni, ma sanno che il loro datore + di lavoro può cambiare. Davvero, senza praticamente eccezioni, loro + stanno lavorando per la creazione del miglior kernel possibile; non + stanno cercando di creare un disagio ad aziende concorrenti. + +Quello che si sta cercando di dire è che, quando i revisori vi inviano degli +appunti dovete fare attenzione alle osservazioni tecniche che vi stanno +facendo. Non lasciate che il loro modo di esprimersi o il vostro orgoglio +impediscano che ciò accada. Quando avete dei suggerimenti sulla revisione, +prendetevi il tempo per comprendere cosa il revisore stia cercando di +comunicarvi. Se possibile, sistemate le cose che il revisore vi chiede di +modificare. E rispondete al revisore ringraziandolo e spiegando come +intendete fare. + +Notate che non dovete per forza essere d'accordo con ogni singola modifica +suggerita dai revisori. Se credete che il revisore non abbia compreso +il vostro codice, spiegateglielo. Se avete un'obiezione tecnica da fargli +su di una modifica suggerita, spiegatela inserendo anche la vostra soluzione +al problema. Se la vostra spiegazione ha senso, il revisore la accetterà. +Tuttavia, la vostra motivazione potrebbe non essere del tutto persuasiva, +specialmente se altri iniziano ad essere d'accordo con il revisore. +Prendetevi quindi un po' di tempo per pensare ancora alla cosa. Può risultare +facile essere accecati dalla propria soluzione al punto che non realizzate che +c'è qualcosa di fondamentalmente sbagliato o, magari, non state nemmeno +risolvendo il problema giusto. + +Andrew Morton suggerisce che ogni suggerimento di revisione che non è +presente nella modifica del codice dovrebbe essere inserito in un commento +aggiuntivo; ciò può essere d'aiuto ai futuri revisori nell'evitare domande +che sorgono al primo sguardo. + +Un errore fatale è quello di ignorare i commenti di revisione nella speranza +che se ne andranno. Non andranno via. Se pubblicherete nuovamente il +codice senza aver risposto ai commenti ricevuti, probabilmente le vostre +modifiche non andranno da nessuna parte. + +Parlando di ripubblicazione del codice: per favore tenete a mente che i +revisori non ricorderanno tutti i dettagli del codice che avete pubblicato +l'ultima volta. Quindi è sempre una buona idea quella di ricordare ai +revisori le questioni sollevate precedetemene e come le avete risolte. +I revisori non dovrebbero star lì a cercare all'interno degli archivi per +famigliarizzare con ciò che è stato detto l'ultima volta; se li aiutate +in questo senso, saranno di umore migliore quando riguarderanno il vostro +codice. + +Se invece avete cercato di far tutto correttamente ma le cose continuano +a non andar bene? Molti disaccordi di natura tecnica possono essere risolti +attraverso la discussione, ma ci sono volte dove qualcuno deve prendere +una decisione. Se credete veramente che tale decisione andrà contro di voi +ingiustamente, potete sempre tentare di rivolgervi a qualcuno più +in alto di voi. Per cose di questo genere la persona con più potere è +Andrew Morton. Andrew è una figura molto rispettata all'interno della +comunità di sviluppo del kernel; lui può spesso sbrogliare situazioni che +sembrano irrimediabilmente bloccate. Rivolgersi ad Andrew non deve essere +fatto alla leggera, e non deve essere fatto prima di aver esplorato tutte +le altre alternative. E tenete a mente, ovviamente, che nemmeno lui +potrebbe non essere d'accordo con voi. + +Cosa accade poi +=============== + +Se la modifica è ritenuta un elemento valido da essere aggiunta al kernel, +e una volta che la maggior parte degli appunti dei revisori sono stati +sistemati, il passo successivo solitamente è quello di entrare in un +sottosistema gestito da un manutentore. Come ciò avviene dipende dal +sottosistema medesimo; ogni manutentore ha il proprio modo di fare le cose. +In particolare, ci potrebbero essere diversi sorgenti - uno, magari, dedicato +alle modifiche pianificate per la finestra di fusione successiva, e un altro +per il lavoro di lungo periodo. + +Per le modifiche proposte in aree per le quali non esiste un sottosistema +preciso (modifiche di gestione della memoria, per esempio), i sorgenti di +ripiego finiscono per essere -mm. Ed anche le modifiche che riguardano +più sottosistemi possono finire in quest'ultimo. + +L'inclusione nei sorgenti di un sottosistema può comportare per una patch, +un alto livello di visibilità. Ora altri sviluppatori che stanno lavorando +in quei medesimi sorgenti avranno le vostre modifiche. I sottosistemi +solitamente riforniscono anche Linux-next, rendendo i propri contenuti +visibili all'intera comunità di sviluppo. A questo punto, ci sono buone +possibilità per voi di ricevere ulteriori commenti da un nuovo gruppo di +revisori; anche a questi commenti dovrete rispondere come avete già fatto per +gli altri. + +Ciò che potrebbe accadere a questo punto, in base alla natura della vostra +modifica, riguarda eventuali conflitti con il lavoro svolto da altri. +Nella peggiore delle situazioni, i conflitti più pesanti tra modifiche possono +concludersi con la messa a lato di alcuni dei lavori svolti cosicché le +modifiche restanti possano funzionare ed essere integrate. Altre volte, la +risoluzione dei conflitti richiederà del lavoro con altri sviluppatori e, +possibilmente, lo spostamento di alcune patch da dei sorgenti a degli altri +in modo da assicurare che tutto sia applicato in modo pulito. Questo lavoro +può rivelarsi una spina nel fianco, ma consideratevi fortunati: prima +dell'avvento dei sorgenti linux-next, questi conflitti spesso emergevano solo +durante l'apertura della finestra di integrazione e dovevano essere smaltiti +in fretta. Ora essi possono essere risolti comodamente, prima dell'apertura +della finestra. + +Un giorno, se tutto va bene, vi collegherete e vedrete che la vostra patch +è stata inserita nel ramo principale de kernel. Congratulazioni! Terminati +i festeggiamenti (nel frattempo avrete inserito il vostro nome nel file +MAINTAINERS) vale la pena ricordare una piccola cosa, ma importante: il +lavoro non è ancora finito. L'inserimento nel ramo principale porta con se +nuove sfide. + +Cominciamo con il dire che ora la visibilità della vostra modifica è +ulteriormente cresciuta. Ci potrebbe portare ad una nuova fase di +commenti dagli sviluppatori che non erano ancora a conoscenza della vostra +patch. Ignorarli potrebbe essere allettante dato che non ci sono più +dubbi sull'integrazione della modifica. Resistete a tale tentazione, dovete +mantenervi disponibili agli sviluppatori che hanno domande o suggerimenti +per voi. + +Ancora più importante: l'inclusione nel ramo principale mette il vostro +codice nelle mani di un gruppo di *tester* molto più esteso. Anche se avete +contribuito ad un driver per un hardware che non è ancora disponibile, sarete +sorpresi da quante persone inseriranno il vostro codice nei loro kernel. +E, ovviamente, dove ci sono *tester*, ci saranno anche dei rapporti su +eventuali bachi. + +La peggior specie di rapporti sono quelli che indicano delle regressioni. +Se la vostra modifica causa una regressione, avrete un gran numero di +occhi puntati su di voi; la regressione deve essere sistemata il prima +possibile. Se non vorrete o non sarete capaci di sistemarla (e nessuno +lo farà per voi), la vostra modifica sarà quasi certamente rimossa durante +la fase di stabilizzazione. Oltre alla perdita di tutto il lavoro svolto +per far si che la vostra modifica fosse inserita nel ramo principale, +l'avere una modifica rimossa a causa del fallimento nel sistemare una +regressione, potrebbe rendere più difficile per voi far accettare +il vostro lavoro in futuro. + +Dopo che ogni regressione è stata affrontata, ci potrebbero essere altri +bachi ordinari da "sconfiggere". Il periodo di stabilizzazione è la +vostra migliore opportunità per sistemare questi bachi e assicurarvi che +il debutto del vostro codice nel ramo principale del kernel sia il più solido +possibile. Quindi, per favore, rispondete ai rapporti sui bachi e ponete +rimedio, se possibile, a tutti i problemi. È a questo che serve il periodo +di stabilizzazione; potete iniziare creando nuove fantastiche modifiche +una volta che ogni problema con le vecchie sia stato risolto. + +Non dimenticate che esistono altre pietre miliari che possono generare +rapporti sui bachi: il successivo rilascio stabile, quando una distribuzione +importante usa una versione del kernel nel quale è presente la vostra +modifica, eccetera. Il continuare a rispondere a questi rapporti è fonte di +orgoglio per il vostro lavoro. Se questa non è una sufficiente motivazione, +allora, è anche consigliabile considera che la comunità di sviluppo ricorda +gli sviluppatori che hanno perso interesse per il loro codice una volta +integrato. La prossima volta che pubblicherete una patch, la comunità +la valuterà anche sulla base del fatto che non sarete disponibili a +prendervene cura anche nel futuro. + + +Altre cose che posso accadere +============================= + +Un giorno, potreste aprire la vostra email e vedere che qualcuno vi ha +inviato una patch per il vostro codice. Questo, dopo tutto, è uno dei +vantaggi di avere il vostro codice "là fuori". Se siete d'accordo con +la modifica, potrete anche inoltrarla ad un manutentore di sottosistema +(assicuratevi di includere la riga "From:" cosicché l'attribuzione sia +corretta, e aggiungete una vostra firma "Signed-off-by"), oppure inviate +un "Acked-by:" e lasciate che l'autore originale la invii. + +Se non siete d'accordo con la patch, inviate una risposta educata +spiegando il perché. Se possibile, dite all'autore quali cambiamenti +servirebbero per rendere la patch accettabile da voi. C'è una certa +riluttanza nell'inserire modifiche con un conflitto fra autore +e manutentore del codice, ma solo fino ad un certo punto. Se siete visti +come qualcuno che blocca un buon lavoro senza motivo, quelle patch vi +passeranno oltre e andranno nel ramo principale in ogni caso. Nel kernel +Linux, nessuno ha potere di veto assoluto su alcun codice. Eccezione +fatta per Linus, forse. + +In rarissime occasioni, potreste vedere qualcosa di completamente diverso: +un altro sviluppatore che pubblica una soluzione differente al vostro +problema. A questo punto, c'è una buona probabilità che una delle due +modifiche non verrà integrata, e il "c'ero prima io" non è considerato +un argomento tecnico rilevante. Se la modifica di qualcun'altro rimpiazza +la vostra ed entra nel ramo principale, esiste un unico modo di reagire: +siate contenti che il vostro problema sia stato risolto e andate avanti con +il vostro lavoro. L'avere un vostro lavoro spintonato da parte in questo +modo può essere avvilente e scoraggiante, ma la comunità ricorderà come +avrete reagito anche dopo che avrà dimenticato quale fu la modifica accettata. diff --git a/Documentation/translations/it_IT/process/7.AdvancedTopics.rst b/Documentation/translations/it_IT/process/7.AdvancedTopics.rst new file mode 100644 index 000000000000..cc1cff5d23ae --- /dev/null +++ b/Documentation/translations/it_IT/process/7.AdvancedTopics.rst @@ -0,0 +1,191 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/7.AdvancedTopics.rst <development_advancedtopics>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_development_advancedtopics: + +Argomenti avanzati +================== + +A questo punto, si spera, dovreste avere un'idea su come funziona il processo +di sviluppo. Ma rimane comunque molto da imparare! Questo capitolo copre +alcuni argomenti che potrebbero essere utili per gli sviluppatori che stanno +per diventare parte integrante del processo di sviluppo del kernel. + +Gestire le modifiche con git +----------------------------- + +L'uso di un sistema distribuito per il controllo delle versioni del kernel +ebbe iniziò nel 2002 quando Linux iniziò a provare il programma proprietario +BitKeeper. Nonostante l'uso di BitKeeper fosse opinabile, di certo il suo +approccio alla gestione dei sorgenti non lo era. Un sistema distribuito per +il controllo delle versioni accelerò immediatamente lo sviluppo del kernel. +Oggigiorno, ci sono diverse alternative libere a BitKeeper. Per il meglio o il +peggio, il progetto del kernel ha deciso di usare git per gestire i sorgenti. + +Gestire le modifiche con git può rendere la vita dello sviluppatore molto +più facile, specialmente quando il volume delle modifiche cresce. +Git ha anche i suoi lati taglienti che possono essere pericolosi; è uno +strumento giovane e potente che è ancora in fase di civilizzazione da parte +dei suoi sviluppatori. Questo documento non ha lo scopo di insegnare l'uso +di git ai suoi lettori; ci sarebbe materiale a sufficienza per un lungo +documento al riguardo. Invece, qui ci concentriamo in particolare su come +git è parte del processo di sviluppo del kernel. Gli sviluppatori che +desiderassero diventare agili con git troveranno più informazioni ai +seguenti indirizzi: + + http://git-scm.com/ + + http://www.kernel.org/pub/software/scm/git/docs/user-manual.html + +e su varie guide che potrete trovare su internet. + +La prima cosa da fare prima di usarlo per produrre patch che saranno +disponibili ad altri, è quella di leggere i siti qui sopra e di acquisire una +base solida su come funziona git. Uno sviluppatore che sappia usare git +dovrebbe essere capace di ottenere una copia del repositorio principale, +esplorare la storia della revisione, registrare le modifiche, usare i rami, +eccetera. Una certa comprensione degli strumenti git per riscrivere la storia +(come ``rebase``) è altrettanto utile. Git ha i propri concetti e la propria +terminologia; un nuovo utente dovrebbe conoscere *refs*, *remote branch*, +*index*, *fast-forward merge*, *push* e *pull*, *detached head*, eccetera. +Il tutto potrebbe essere un po' intimidatorio visto da fuori, ma con un po' +di studio i concetti non saranno così difficili da capire. + +Utilizzare git per produrre patch da sottomettere via email può essere +un buon esercizio da fare mentre si sta prendendo confidenza con lo strumento. + +Quando sarete in grado di creare rami git che siano guardabili da altri, +vi servirà, ovviamente, un server dal quale sia possibile attingere le vostre +modifiche. Se avete un server accessibile da Internet, configurarlo per +eseguire git-daemon è relativamente semplice . Altrimenti, iniziano a +svilupparsi piattaforme che offrono spazi pubblici, e gratuiti (Github, +per esempio). Gli sviluppatori permanenti possono ottenere un account +su kernel.org, ma non è proprio facile da ottenere; per maggiori informazioni +consultate la pagina web http://kernel.org/faq/. + +In git è normale avere a che fare con tanti rami. Ogni linea di sviluppo +può essere separata in "rami per argomenti" e gestiti indipendentemente. +In git i rami sono facilissimi, per cui non c'è motivo per non usarli +in libertà. In ogni caso, non dovreste sviluppare su alcun ramo dal +quale altri potrebbero attingere. I rami disponibili pubblicamente dovrebbero +essere creati con attenzione; integrate patch dai rami di sviluppo +solo quando sono complete e pronte ad essere consegnate - non prima. + +Git offre alcuni strumenti che vi permettono di riscrivere la storia del +vostro sviluppo. Una modifica errata (diciamo, una che rompe la bisezione, +oppure che ha un qualche tipo di baco evidente) può essere corretta sul posto +o fatta sparire completamente dalla storia. Una serie di patch può essere +riscritta come se fosse stata scritta in cima al ramo principale di oggi, +anche se ci avete lavorato per mesi. Le modifiche possono essere spostate +in modo trasparente da un ramo ad un altro. E così via. Un uso giudizioso +di git per revisionare la storia può aiutare nella creazione di una serie +di patch pulite e con meno problemi. + +Un uso eccessivo può portare ad altri tipi di problemi, tuttavia, oltre +alla semplice ossessione per la creazione di una storia del progetto che sia +perfetta. Riscrivere la storia riscriverà le patch contenute in quella +storia, trasformando un kernel verificato (si spera) in uno da verificare. +Ma, oltre a questo, gli sviluppatori non possono collaborare se non condividono +la stessa vista sulla storia del progetto; se riscrivete la storia dalla quale +altri sviluppatori hanno attinto per i loro repositori, renderete la loro vita +molto più difficile. Quindi tenete conto di questa semplice regola generale: +la storia che avete esposto ad altri, generalmente, dovrebbe essere vista come +immutabile. + +Dunque, una volta che il vostro insieme di patch è stato reso disponibile +pubblicamente non dovrebbe essere più sovrascritto. Git tenterà di imporre +questa regola, e si rifiuterà di pubblicare nuove patch che non risultino +essere dirette discendenti di quelle pubblicate in precedenza (in altre parole, +patch che non condividono la stessa storia). È possibile ignorare questo +controllo, e ci saranno momenti in cui sarà davvero necessario riscrivere +un ramo già pubblicato. Un esempio è linux-next dove le patch vengono +spostate da un ramo all'altro al fine di evitare conflitti. Ma questo tipo +d'azione dovrebbe essere un'eccezione. Questo è uno dei motivi per cui lo +sviluppo dovrebbe avvenire in rami privati (che possono essere sovrascritti +quando lo si ritiene necessario) e reso pubblico solo quando è in uno stato +avanzato. + +Man mano che il ramo principale (o altri rami su cui avete basato le +modifiche) avanza, diventa allettante l'idea di integrare tutte le patch +per rimanere sempre aggiornati. Per un ramo privato, il *rebase* può essere +un modo semplice per rimanere aggiornati, ma questa non è un'opzione nel +momento in cui il vostro ramo è stato esposto al mondo intero. +*Merge* occasionali possono essere considerati di buon senso, ma quando +diventano troppo frequenti confondono inutilmente la storia. La tecnica +suggerita in questi casi è quella di fare *merge* raramente, e più in generale +solo nei momenti di rilascio (per esempio gli -rc del ramo principale). +Se siete nervosi circa alcune patch in particolare, potete sempre fare +dei *merge* di test in un ramo privato. In queste situazioni git "rerere" +può essere utile; questo strumento si ricorda come i conflitti di *merge* +furono risolti in passato cosicché non dovrete fare lo stesso lavoro due volte. + +Una delle lamentele più grosse e ricorrenti sull'uso di strumenti come git +è il grande movimento di patch da un repositorio all'altro che rende +facile l'integrazione nel ramo principale di modifiche mediocri, il tutto +sotto il naso dei revisori. Gli sviluppatori del kernel tendono ad essere +scontenti quando vedono succedere queste cose; preparare un ramo git con +patch che non hanno ricevuto alcuna revisione o completamente avulse, potrebbe +influire sulla vostra capacita di proporre, in futuro, l'integrazione dei +vostri rami. Citando Linus + +:: + + Potete inviarmi le vostre patch, ma per far si che io integri una + vostra modifica da git, devo sapere che voi sappiate cosa state + facendo, e ho bisogno di fidarmi *senza* dover passare tutte + le modifiche manualmente una per una. + +(http://lwn.net/Articles/224135/). + +Per evitare queste situazioni, assicuratevi che tutte le patch in un ramo +siano strettamente correlate al tema delle modifiche; un ramo "driver fixes" +non dovrebbe fare modifiche al codice principale per la gestione della memoria. +E, più importante ancora, non usate un repositorio git per tentare di +evitare il processo di revisione. Pubblicate un sommario di quello che il +vostro ramo contiene sulle liste di discussione più opportune, e , quando +sarà il momento, richiedete che il vostro ramo venga integrato in linux-next. + +Se e quando altri inizieranno ad inviarvi patch per essere incluse nel +vostro repositorio, non dovete dimenticare di revisionarle. Inoltre +assicuratevi di mantenerne le informazioni di paternità; al riguardo git "am" +fa del suo meglio, ma potreste dover aggiungere una riga "From:" alla patch +nel caso in cui sia arrivata per vie traverse. + +Quando richiedete l'integrazione, siate certi di fornire tutte le informazioni: +dov'è il vostro repositorio, quale ramo integrare, e quali cambiamenti si +otterranno dall'integrazione. Il comando git request-pull può essere d'aiuto; +preparerà una richiesta nel modo in cui gli altri sviluppatori se l'aspettano, +e verificherà che vi siate ricordati di pubblicare quelle patch su un +server pubblico. + +Revisionare le patch +-------------------- + +Alcuni lettori potrebbero avere obiezioni sulla presenza di questa sezione +negli "argomenti avanzati" sulla base che anche gli sviluppatori principianti +dovrebbero revisionare le patch. É certamente vero che non c'è modo +migliore di imparare come programmare per il kernel che guardare il codice +pubblicato dagli altri. In aggiunta, i revisori sono sempre troppo pochi; +guardando il codice potete apportare un significativo contributo all'intero +processo. + +Revisionare il codice potrebbe risultare intimidatorio, specialmente per i +nuovi arrivati che potrebbero sentirsi un po' nervosi nel questionare +il codice - in pubblico - pubblicato da sviluppatori più esperti. Perfino +il codice scritto dagli sviluppatori più esperti può essere migliorato. +Forse il suggerimento migliore per i revisori (tutti) è questo: formulate +i commenti come domande e non come critiche. Chiedere "Come viene rilasciato +il *lock* in questo percorso?" funziona sempre molto meglio che +"qui la sincronizzazione è sbagliata". + +Diversi sviluppatori revisioneranno il codice con diversi punti di vista. +Alcuni potrebbero concentrarsi principalmente sullo stile del codice e se +alcune linee hanno degli spazio bianchi di troppo. Altri si chiederanno +se accettare una modifica interamente è una cosa positiva per il kernel +o no. E altri ancora si focalizzeranno sui problemi di sincronizzazione, +l'uso eccessivo di *stack*, problemi di sicurezza, duplicazione del codice +in altri contesti, documentazione, effetti negativi sulle prestazioni, cambi +all'ABI dello spazio utente, eccetera. Qualunque tipo di revisione è ben +accetta e di valore, se porta ad avere un codice migliore nel kernel. diff --git a/Documentation/translations/it_IT/process/8.Conclusion.rst b/Documentation/translations/it_IT/process/8.Conclusion.rst new file mode 100644 index 000000000000..039bfc5a4108 --- /dev/null +++ b/Documentation/translations/it_IT/process/8.Conclusion.rst @@ -0,0 +1,85 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/8.Conclusion.rst <development_conclusion>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_development_conclusion: + +Per maggiori informazioni +========================= + +Esistono numerose fonti di informazioni sullo sviluppo del kernel Linux +e argomenti correlati. Primo tra questi sarà sempre la cartella Documentation +che si trova nei sorgenti kernel. + +Il file :ref:`process/howto.rst <it_process_howto>` è un punto di partenza +importante; :ref:`process/submitting-patches.rst <it_submittingpatches>` e +:ref:`process/submitting-drivers.rst <it_submittingdrivers>` sono +anch'essi qualcosa che tutti gli sviluppatori del kernel dovrebbero leggere. +Molte API interne al kernel sono documentate utilizzando il meccanismo +kerneldoc; "make htmldocs" o "make pdfdocs" possono essere usati per generare +quei documenti in HTML o PDF (sebbene le versioni di TeX di alcune +distribuzioni hanno dei limiti interni e fallisce nel processare +appropriatamente i documenti). + +Diversi siti web approfondiscono lo sviluppo del kernel ad ogni livello +di dettaglio. Il vostro autore vorrebbe umilmente suggerirvi +http://lwn.net/ come fonte; usando l'indice 'kernel' su LWN troverete +molti argomenti specifici sul kernel: + + http://lwn.net/Kernel/Index/ + +Oltre a ciò, una risorsa valida per gli sviluppatori kernel è: + + http://kernelnewbies.org/ + +E, ovviamente, una fonte da non dimenticare è http://kernel.org/, il luogo +definitivo per le informazioni sui rilasci del kernel. + +Ci sono numerosi libri sullo sviluppo del kernel: + + Linux Device Drivers, 3rd Edition (Jonathan Corbet, Alessandro + Rubini, and Greg Kroah-Hartman). In linea all'indirizzo + http://lwn.net/Kernel/LDD3/. + + Linux Kernel Development (Robert Love). + + Understanding the Linux Kernel (Daniel Bovet and Marco Cesati). + +Tutti questi libri soffrono di un errore comune: tendono a risultare in un +certo senso obsoleti dal momento che si trovano in libreria da diverso +tempo. Comunque contengono informazioni abbastanza buone. + +La documentazione per git la troverete su: + + http://www.kernel.org/pub/software/scm/git/docs/ + + http://www.kernel.org/pub/software/scm/git/docs/user-manual.html + + + +Conclusioni +=========== + +Congratulazioni a chiunque ce l'abbia fatta a terminare questo documento di +lungo-respiro. Si spera che abbia fornito un'utile comprensione d'insieme +di come il kernel Linux viene sviluppato e di come potete partecipare a +tale processo. + +Infine, quello che conta è partecipare. Qualsiasi progetto software +open-source non è altro che la somma di quello che i suoi contributori +mettono al suo interno. Il kernel Linux è cresciuto velocemente e bene +perché ha ricevuto il supporto di un impressionante gruppo di sviluppatori, +ognuno dei quali sta lavorando per renderlo migliore. Il kernel è un esempio +importante di cosa può essere fatto quando migliaia di persone lavorano +insieme verso un obiettivo comune. + +Il kernel può sempre beneficiare di una larga base di sviluppatori, tuttavia, +c'è sempre molto lavoro da fare. Ma, cosa non meno importante, molti degli +altri partecipanti all'ecosistema Linux possono trarre beneficio attraverso +il contributo al kernel. Inserire codice nel ramo principale è la chiave +per arrivare ad una qualità del codice più alta, bassa manutenzione e +bassi prezzi di distribuzione, alti livelli d'influenza sulla direzione +dello sviluppo del kernel, e molto altro. È una situazione nella quale +tutti coloro che sono coinvolti vincono. Mollate il vostro editor e +raggiungeteci; sarete più che benvenuti. diff --git a/Documentation/translations/it_IT/process/adding-syscalls.rst b/Documentation/translations/it_IT/process/adding-syscalls.rst new file mode 100644 index 000000000000..e0a64b0688a7 --- /dev/null +++ b/Documentation/translations/it_IT/process/adding-syscalls.rst @@ -0,0 +1,643 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/adding-syscalls.rst <addsyscalls>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_addsyscalls: + +Aggiungere una nuova chiamata di sistema +======================================== + +Questo documento descrive quello che è necessario sapere per aggiungere +nuove chiamate di sistema al kernel Linux; questo è da considerarsi come +un'aggiunta ai soliti consigli su come proporre nuove modifiche +:ref:`Documentation/translations/it_IT/process/submitting-patches.rst <it_submittingpatches>`. + + +Alternative alle chiamate di sistema +------------------------------------ + +La prima considerazione da fare quando si aggiunge una nuova chiamata di +sistema è quella di valutare le alternative. Nonostante le chiamate di sistema +siano il punto di interazione fra spazio utente e kernel più tradizionale ed +ovvio, esistono altre possibilità - scegliete quella che meglio si adatta alle +vostra interfaccia. + + - Se le operazioni coinvolte possono rassomigliare a quelle di un filesystem, + allora potrebbe avere molto più senso la creazione di un nuovo filesystem o + dispositivo. Inoltre, questo rende più facile incapsulare la nuova + funzionalità in un modulo kernel piuttosto che essere sviluppata nel cuore + del kernel. + + - Se la nuova funzionalità prevede operazioni dove il kernel notifica + lo spazio utente su un avvenimento, allora restituire un descrittore + di file all'oggetto corrispondente permette allo spazio utente di + utilizzare ``poll``/``select``/``epoll`` per ricevere quelle notifiche. + - Tuttavia, le operazioni che non si sposano bene con operazioni tipo + :manpage:`read(2)`/:manpage:`write(2)` dovrebbero essere implementate + come chiamate :manpage:`ioctl(2)`, il che potrebbe portare ad un'API in + un qualche modo opaca. + + - Se dovete esporre solo delle informazioni sul sistema, un nuovo nodo in + sysfs (vedere ``Documentation/translations/it_IT/filesystems/sysfs.txt``) o + in procfs potrebbe essere sufficiente. Tuttavia, l'accesso a questi + meccanismi richiede che il filesystem sia montato, il che potrebbe non + essere sempre vero (per esempio, in ambienti come namespace/sandbox/chroot). + Evitate d'aggiungere nuove API in debugfs perché questo non viene + considerata un'interfaccia di 'produzione' verso lo spazio utente. + - Se l'operazione è specifica ad un particolare file o descrittore, allora + potrebbe essere appropriata l'aggiunta di un comando :manpage:`fcntl(2)`. + Tuttavia, :manpage:`fcntl(2)` è una chiamata di sistema multiplatrice che + nasconde una notevole complessità, quindi è ottima solo quando la nuova + funzione assomiglia a quelle già esistenti in :manpage:`fcntl(2)`, oppure + la nuova funzionalità è veramente semplice (per esempio, leggere/scrivere + un semplice flag associato ad un descrittore di file). + - Se l'operazione è specifica ad un particolare processo, allora + potrebbe essere appropriata l'aggiunta di un comando :manpage:`prctl(2)`. + Come per :manpage:`fcntl(2)`, questa chiamata di sistema è un complesso + multiplatore quindi è meglio usarlo per cose molto simili a quelle esistenti + nel comando ``prctl`` oppure per leggere/scrivere un semplice flag relativo + al processo. + + +Progettare l'API: pianificare le estensioni +------------------------------------------- + +Una nuova chiamata di sistema diventerà parte dell'API del kernel, e +dev'essere supportata per un periodo indefinito. Per questo, è davvero +un'ottima idea quella di discutere apertamente l'interfaccia sulla lista +di discussione del kernel, ed è altrettanto importante pianificarne eventuali +estensioni future. + +(Nella tabella delle chiamate di sistema sono disseminati esempi dove questo +non fu fatto, assieme ai corrispondenti aggiornamenti - +``eventfd``/``eventfd2``, ``dup2``/``dup3``, ``inotify_init``/``inotify_init1``, +``pipe``/``pipe2``, ``renameat``/``renameat2`` --quindi imparate dalla storia +del kernel e pianificate le estensioni fin dall'inizio) + +Per semplici chiamate di sistema che accettano solo un paio di argomenti, +il modo migliore di permettere l'estensibilità è quello di includere un +argomento *flags* alla chiamata di sistema. Per assicurarsi che i programmi +dello spazio utente possano usare in sicurezza *flags* con diverse versioni +del kernel, verificate se *flags* contiene un qualsiasi valore sconosciuto, +in qual caso rifiutate la chiamata di sistema (con ``EINVAL``):: + + if (flags & ~(THING_FLAG1 | THING_FLAG2 | THING_FLAG3)) + return -EINVAL; + +(Se *flags* non viene ancora utilizzato, verificate che l'argomento sia zero) + +Per chiamate di sistema più sofisticate che coinvolgono un numero più grande di +argomenti, il modo migliore è quello di incapsularne la maggior parte in una +struttura dati che verrà passata per puntatore. Questa struttura potrà +funzionare con future estensioni includendo un campo *size*:: + + struct xyzzy_params { + u32 size; /* userspace sets p->size = sizeof(struct xyzzy_params) */ + u32 param_1; + u64 param_2; + u64 param_3; + }; + +Fintanto che un qualsiasi campo nuovo, diciamo ``param_4``, è progettato per +offrire il comportamento precedente quando vale zero, allora questo permetterà +di gestire un conflitto di versione in entrambe le direzioni: + + - un vecchio kernel può gestire l'accesso di una versione moderna di un + programma in spazio utente verificando che la memoria oltre la dimensione + della struttura dati attesa sia zero (in pratica verificare che + ``param_4 == 0``). + - un nuovo kernel può gestire l'accesso di una versione vecchia di un + programma in spazio utente estendendo la struttura dati con zeri (in pratica + ``param_4 = 0``). + +Vedere :manpage:`perf_event_open(2)` e la funzione ``perf_copy_attr()`` (in +``kernel/events/core.c``) per un esempio pratico di questo approccio. + + +Progettare l'API: altre considerazioni +-------------------------------------- + +Se la vostra nuova chiamata di sistema permette allo spazio utente di fare +riferimento ad un oggetto del kernel, allora questa dovrebbe usare un +descrittore di file per accesso all'oggetto - non inventatevi nuovi tipi di +accesso da spazio utente quando il kernel ha già dei meccanismi e una semantica +ben definita per utilizzare i descrittori di file. + +Se la vostra nuova chiamata di sistema :manpage:`xyzzy(2)` ritorna un nuovo +descrittore di file, allora l'argomento *flags* dovrebbe includere un valore +equivalente a ``O_CLOEXEC`` per i nuovi descrittori. Questo rende possibile, +nello spazio utente, la chiusura della finestra temporale fra le chiamate a +``xyzzy()`` e ``fcntl(fd, F_SETFD, FD_CLOEXEC)``, dove un inaspettato +``fork()`` o ``execve()`` potrebbe trasferire il descrittore al programma +eseguito (Comunque, resistete alla tentazione di riutilizzare il valore di +``O_CLOEXEC`` dato che è specifico dell'architettura e fa parte di una +enumerazione di flag ``O_*`` che è abbastanza ricca). + +Se la vostra nuova chiamata di sistema ritorna un nuovo descrittore di file, +dovreste considerare che significato avrà l'uso delle chiamate di sistema +della famiglia di :manpage:`poll(2)`. Rendere un descrittore di file pronto +per la lettura o la scrittura è il tipico modo del kernel per notificare lo +spazio utente circa un evento associato all'oggetto del kernel. + +Se la vostra nuova chiamata di sistema :manpage:`xyzzy(2)` ha un argomento +che è il percorso ad un file:: + + int sys_xyzzy(const char __user *path, ..., unsigned int flags); + +dovreste anche considerare se non sia più appropriata una versione +:manpage:`xyzzyat(2)`:: + + int sys_xyzzyat(int dfd, const char __user *path, ..., unsigned int flags); + +Questo permette più flessibilità su come lo spazio utente specificherà il file +in questione; in particolare, permette allo spazio utente di richiedere la +funzionalità su un descrittore di file già aperto utilizzando il *flag* +``AT_EMPTY_PATH``, in pratica otterremmo gratuitamente l'operazione +:manpage:`fxyzzy(3)`:: + + - xyzzyat(AT_FDCWD, path, ..., 0) is equivalent to xyzzy(path,...) + - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...) + +(Per maggiori dettagli sulla logica delle chiamate \*at(), leggete la pagina +man :manpage:`openat(2)`; per un esempio di AT_EMPTY_PATH, leggere la pagina +man :manpage:`fstatat(2)`). + +Se la vostra nuova chiamata di sistema :manpage:`xyzzy(2)` prevede un parametro +per descrivere uno scostamento all'interno di un file, usate ``loff_t`` come +tipo cosicché scostamenti a 64-bit potranno essere supportati anche su +architetture a 32-bit. + +Se la vostra nuova chiamata di sistema :manpage:`xyzzy(2)` prevede l'uso di +funzioni riservate, allora dev'essere gestita da un opportuno bit di privilegio +(verificato con una chiamata a ``capable()``), come descritto nella pagina man +:manpage:`capabilities(7)`. Scegliete un bit di privilegio già esistente per +gestire la funzionalità associata, ma evitate la combinazione di diverse +funzionalità vagamente collegate dietro lo stesso bit, in quanto va contro il +principio di *capabilities* di separare i poteri di root. In particolare, +evitate di aggiungere nuovi usi al fin-troppo-generico privilegio +``CAP_SYS_ADMIN``. + +Se la vostra nuova chiamata di sistema :manpage:`xyzzy(2)` manipola altri +processi oltre a quello chiamato, allora dovrebbe essere limitata (usando +la chiamata ``ptrace_may_access()``) di modo che solo un processo chiamante +con gli stessi permessi del processo in oggetto, o con i necessari privilegi, +possa manipolarlo. + +Infine, state attenti che in alcune architetture non-x86 la vita delle chiamate +di sistema con argomenti a 64-bit viene semplificata se questi argomenti +ricadono in posizioni dispari (pratica, i parametri 1, 3, 5); questo permette +l'uso di coppie contigue di registri a 32-bit. (Questo non conta se gli +argomenti sono parte di una struttura dati che viene passata per puntatore). + + +Proporre l'API +-------------- + +Al fine di rendere le nuove chiamate di sistema di facile revisione, è meglio +che dividiate le modifiche i pezzi separati. Questi dovrebbero includere +almeno le seguenti voci in *commit* distinti (ognuno dei quali sarà descritto +più avanti): + + - l'essenza dell'implementazione della chiamata di sistema, con i prototipi, + i numeri generici, le modifiche al Kconfig e l'implementazione *stub* di + ripiego. + - preparare la nuova chiamata di sistema per un'architettura specifica, + solitamente x86 (ovvero tutti: x86_64, x86_32 e x32). + - un programma di auto-verifica da mettere in ``tools/testing/selftests/`` + che mostri l'uso della chiamata di sistema. + - una bozza di pagina man per la nuova chiamata di sistema. Può essere + scritta nell'email di presentazione, oppure come modifica vera e propria + al repositorio delle pagine man. + +Le proposte di nuove chiamate di sistema, come ogni altro modifica all'API del +kernel, deve essere sottomessa alla lista di discussione +linux-api@vger.kernel.org. + + +Implementazione di chiamate di sistema generiche +------------------------------------------------ + +Il principale punto d'accesso alla vostra nuova chiamata di sistema +:manpage:`xyzzy(2)` verrà chiamato ``sys_xyzzy()``; ma, piuttosto che in modo +esplicito, lo aggiungerete tramite la macro ``SYSCALL_DEFINEn``. La 'n' +indica il numero di argomenti della chiamata di sistema; la macro ha come +argomento il nome della chiamata di sistema, seguito dalle coppie (tipo, nome) +per definire i suoi parametri. L'uso di questa macro permette di avere +i metadati della nuova chiamata di sistema disponibili anche per altri +strumenti. + +Il nuovo punto d'accesso necessita anche del suo prototipo di funzione in +``include/linux/syscalls.h``, marcato come asmlinkage di modo da abbinargli +il modo in cui quelle chiamate di sistema verranno invocate:: + + asmlinkage long sys_xyzzy(...); + +Alcune architetture (per esempio x86) hanno le loro specifiche tabelle di +chiamate di sistema (syscall), ma molte altre architetture condividono una +tabella comune di syscall. Aggiungete alla lista generica la vostra nuova +chiamata di sistema aggiungendo un nuovo elemento alla lista in +``include/uapi/asm-generic/unistd.h``:: + + #define __NR_xyzzy 292 + __SYSCALL(__NR_xyzzy, sys_xyzzy) + +Aggiornate anche il contatore __NR_syscalls di modo che sia coerente con +l'aggiunta della nuove chiamate di sistema; va notato che se più di una nuova +chiamata di sistema viene aggiunga nella stessa finestra di sviluppo, il numero +della vostra nuova syscall potrebbe essere aggiustato al fine di risolvere i +conflitti. + +Il file ``kernel/sys_ni.c`` fornisce le implementazioni *stub* di ripiego che +ritornano ``-ENOSYS``. Aggiungete la vostra nuova chiamata di sistema anche +qui:: + + COND_SYSCALL(xyzzy); + +La vostra nuova funzionalità del kernel, e la chiamata di sistema che la +controlla, dovrebbero essere opzionali. Quindi, aggiungete un'opzione +``CONFIG`` (solitamente in ``init/Kconfig``). Come al solito per le nuove +opzioni ``CONFIG``: + + - Includete una descrizione della nuova funzionalità e della chiamata di + sistema che la controlla. + - Rendete l'opzione dipendente da EXPERT se dev'essere nascosta agli utenti + normali. + - Nel Makefile, rendere tutti i nuovi file sorgenti, che implementano la + nuova funzionalità, dipendenti dall'opzione CONFIG (per esempio + ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.o``). + - Controllate due volte che sia possibile generare il kernel con la nuova + opzione CONFIG disabilitata. + +Per riassumere, vi serve un *commit* che includa: + + - un'opzione ``CONFIG``per la nuova funzione, normalmente in ``init/Kconfig`` + - ``SYSCALL_DEFINEn(xyzzy, ...)`` per il punto d'accesso + - il corrispondente prototipo in ``include/linux/syscalls.h`` + - un elemento nella tabella generica in ``include/uapi/asm-generic/unistd.h`` + - *stub* di ripiego in ``kernel/sys_ni.c`` + + +Implementazione delle chiamate di sistema x86 +--------------------------------------------- + +Per collegare la vostra nuova chiamate di sistema alle piattaforme x86, +dovete aggiornate la tabella principale di syscall. Assumendo che la vostra +nuova chiamata di sistema non sia particolarmente speciale (vedere sotto), +dovete aggiungere un elemento *common* (per x86_64 e x32) in +arch/x86/entry/syscalls/syscall_64.tbl:: + + 333 common xyzzy sys_xyzzy + +e un elemento per *i386* ``arch/x86/entry/syscalls/syscall_32.tbl``:: + + 380 i386 xyzzy sys_xyzzy + +Ancora una volta, questi numeri potrebbero essere cambiati se generano +conflitti durante la finestra di integrazione. + + +Chiamate di sistema compatibili (generico) +------------------------------------------ + +Per molte chiamate di sistema, la stessa implementazione a 64-bit può essere +invocata anche quando il programma in spazio utente è a 32-bit; anche se la +chiamata di sistema include esplicitamente un puntatore, questo viene gestito +in modo trasparente. + +Tuttavia, ci sono un paio di situazione dove diventa necessario avere un +livello di gestione della compatibilità per risolvere le differenze di +dimensioni fra 32-bit e 64-bit. + +Il primo caso è quando un kernel a 64-bit supporta anche programmi in spazio +utente a 32-bit, perciò dovrà ispezionare aree della memoria (``__user``) che +potrebbero contenere valori a 32-bit o a 64-bit. In particolar modo, questo +è necessario quando un argomento di una chiamata di sistema è: + + - un puntatore ad un puntatore + - un puntatore ad una struttura dati contenente a sua volta un puntatore + ( ad esempio ``struct iovec __user *``) + - un puntatore ad un tipo intero di dimensione variabile (``time_t``, + ``off_t``, ``long``, ...) + - un puntatore ad una struttura dati contenente un tipo intero di dimensione + variabile. + +Il secondo caso che richiede un livello di gestione della compatibilità è +quando uno degli argomenti di una chiamata a sistema è esplicitamente un tipo +a 64-bit anche su architetture a 32-bit, per esempio ``loff_t`` o ``__u64``. +In questo caso, un valore che arriva ad un kernel a 64-bit da un'applicazione +a 32-bit verrà diviso in due valori a 32-bit che dovranno essere riassemblati +in questo livello di compatibilità. + +(Da notare che non serve questo livello di compatibilità per argomenti che +sono puntatori ad un tipo esplicitamente a 64-bit; per esempio, in +:manpage:`splice(2)` l'argomento di tipo ``loff_t __user *`` non necessita +di una chiamata di sistema ``compat_``) + +La versione compatibile della nostra chiamata di sistema si chiamerà +``compat_sys_xyzzy()``, e viene aggiunta utilizzando la macro +``COMPAT_SYSCALL_DEFINEn()`` (simile a SYSCALL_DEFINEn). Questa versione +dell'implementazione è parte del kernel a 64-bit ma accetta parametri a 32-bit +che trasformerà secondo le necessità (tipicamente, la versione +``compat_sys_`` converte questi valori nello loro corrispondente a 64-bit e +può chiamare la versione ``sys_`` oppure invocare una funzione che implementa +le parti comuni). + +Il punto d'accesso *compat* deve avere il corrispondente prototipo di funzione +in ``include/linux/compat.h``, marcato come asmlinkage di modo da abbinargli +il modo in cui quelle chiamate di sistema verranno invocate:: + + asmlinkage long compat_sys_xyzzy(...); + +Se la chiamata di sistema prevede una struttura dati organizzata in modo +diverso per sistemi a 32-bit e per quelli a 64-bit, diciamo +``struct xyzzy_args``, allora il file d'intestazione +``then the include/linux/compat.h`` deve includere la sua versione +*compatibile* (``struct compat_xyzzy_args``); ogni variabile con +dimensione variabile deve avere il proprio tipo ``compat_`` corrispondente +a quello in ``struct xyzzy_args``. La funzione ``compat_sys_xyzzy()`` +può usare la struttura ``compat_`` per analizzare gli argomenti ricevuti +da una chiamata a 32-bit. + +Per esempio, se avete i seguenti campi:: + + struct xyzzy_args { + const char __user *ptr; + __kernel_long_t varying_val; + u64 fixed_val; + /* ... */ + }; + +nella struttura ``struct xyzzy_args``, allora la struttura +``struct compat_xyzzy_args`` dovrebbe avere:: + + struct compat_xyzzy_args { + compat_uptr_t ptr; + compat_long_t varying_val; + u64 fixed_val; + /* ... */ + }; + +La lista generica delle chiamate di sistema ha bisogno di essere +aggiustata al fine di permettere l'uso della versione *compatibile*; +la voce in ``include/uapi/asm-generic/unistd.h`` dovrebbero usare +``__SC_COMP`` piuttosto di ``__SYSCALL``:: + + #define __NR_xyzzy 292 + __SC_COMP(__NR_xyzzy, sys_xyzzy, compat_sys_xyzzy) + +Riassumendo, vi serve: + + - un ``COMPAT_SYSCALL_DEFINEn(xyzzy, ...)`` per il punto d'accesso + *compatibile* + - un prototipo in ``include/linux/compat.h`` + - (se necessario) una struttura di compatibilità a 32-bit in + ``include/linux/compat.h`` + - una voce ``__SC_COMP``, e non ``__SYSCALL``, in + ``include/uapi/asm-generic/unistd.h`` + +Compatibilità delle chiamate di sistema (x86) +--------------------------------------------- + +Per collegare una chiamata di sistema, su un'architettura x86, con la sua +versione *compatibile*, è necessario aggiustare la voce nella tabella +delle syscall. + +Per prima cosa, la voce in ``arch/x86/entry/syscalls/syscall_32.tbl`` prende +un argomento aggiuntivo per indicare che un programma in spazio utente +a 32-bit, eseguito su un kernel a 64-bit, dovrebbe accedere tramite il punto +d'accesso compatibile:: + + 380 i386 xyzzy sys_xyzzy __ia32_compat_sys_xyzzy + +Secondo, dovete capire cosa dovrebbe succedere alla nuova chiamata di sistema +per la versione dell'ABI x32. Qui C'è una scelta da fare: gli argomenti +possono corrisponde alla versione a 64-bit o a quella a 32-bit. + +Se c'è un puntatore ad un puntatore, la decisione è semplice: x32 è ILP32, +quindi gli argomenti dovrebbero corrispondere a quelli a 32-bit, e la voce in +``arch/x86/entry/syscalls/syscall_64.tbl`` sarà divisa cosicché i programmi +x32 eseguano la chiamata *compatibile*:: + + 333 64 xyzzy sys_xyzzy + ... + 555 x32 xyzzy __x32_compat_sys_xyzzy + +Se non ci sono puntatori, allora è preferibile riutilizzare la chiamata di +sistema a 64-bit per l'ABI x32 (e di conseguenza la voce in +arch/x86/entry/syscalls/syscall_64.tbl rimane immutata). + +In ambo i casi, dovreste verificare che i tipi usati dagli argomenti +abbiano un'esatta corrispondenza da x32 (-mx32) al loro equivalente a +32-bit (-m32) o 64-bit (-m64). + + +Chiamate di sistema che ritornano altrove +----------------------------------------- + +Nella maggior parte delle chiamate di sistema, al termine della loro +esecuzione, i programmi in spazio utente riprendono esattamente dal punto +in cui si erano interrotti -- quindi dall'istruzione successiva, con lo +stesso *stack* e con la maggior parte del registri com'erano stati +lasciati prima della chiamata di sistema, e anche con la stessa memoria +virtuale. + +Tuttavia, alcune chiamata di sistema fanno le cose in modo differente. +Potrebbero ritornare ad un punto diverso (``rt_sigreturn``) o cambiare +la memoria in spazio utente (``fork``/``vfork``/``clone``) o perfino +l'architettura del programma (``execve``/``execveat``). + +Per permettere tutto ciò, l'implementazione nel kernel di questo tipo di +chiamate di sistema potrebbero dover salvare e ripristinare registri +aggiuntivi nello *stack* del kernel, permettendo così un controllo completo +su dove e come l'esecuzione dovrà continuare dopo l'esecuzione della +chiamata di sistema. + +Queste saranno specifiche per ogni architettura, ma tipicamente si definiscono +dei punti d'accesso in *assembly* per salvare/ripristinare i registri +aggiuntivi e quindi chiamare il vero punto d'accesso per la chiamata di +sistema. + +Per l'architettura x86_64, questo è implementato come un punto d'accesso +``stub_xyzzy`` in ``arch/x86/entry/entry_64.S``, e la voce nella tabella +di syscall (``arch/x86/entry/syscalls/syscall_64.tbl``) verrà corretta di +conseguenza:: + + 333 common xyzzy stub_xyzzy + +L'equivalente per programmi a 32-bit eseguiti su un kernel a 64-bit viene +normalmente chiamato ``stub32_xyzzy`` e implementato in +``arch/x86/entry/entry_64_compat.S`` con la corrispondente voce nella tabella +di syscall ``arch/x86/entry/syscalls/syscall_32.tbl`` corretta nel +seguente modo:: + + 380 i386 xyzzy sys_xyzzy stub32_xyzzy + +Se una chiamata di sistema necessita di un livello di compatibilità (come +nella sezione precedente), allora la versione ``stub32_`` deve invocare +la versione ``compat_sys_`` piuttosto che quella nativa a 64-bit. In aggiunta, +se l'implementazione dell'ABI x32 è diversa da quella x86_64, allora la sua +voce nella tabella di syscall dovrà chiamare uno *stub* che invoca la versione +``compat_sys_``, + +Per completezza, sarebbe carino impostare una mappatura cosicché +*user-mode* Linux (UML) continui a funzionare -- la sua tabella di syscall +farà riferimento a stub_xyzzy, ma UML non include l'implementazione +in ``arch/x86/entry/entry_64.S`` (perché UML simula i registri eccetera). +Correggerlo è semplice, basta aggiungere una #define in +``arch/x86/um/sys_call_table_64.c``:: + + #define stub_xyzzy sys_xyzzy + + +Altri dettagli +-------------- + +La maggior parte dei kernel tratta le chiamate di sistema allo stesso modo, +ma possono esserci rare eccezioni per le quali potrebbe essere necessario +l'aggiornamento della vostra chiamata di sistema. + +Il sotto-sistema di controllo (*audit subsystem*) è uno di questi casi +speciali; esso include (per architettura) funzioni che classificano alcuni +tipi di chiamate di sistema -- in particolare apertura dei file +(``open``/``openat``), esecuzione dei programmi (``execve``/``exeveat``) +oppure multiplatori di socket (``socketcall``). Se la vostra nuova chiamata +di sistema è simile ad una di queste, allora il sistema di controllo dovrebbe +essere aggiornato. + +Più in generale, se esiste una chiamata di sistema che è simile alla vostra, +vale la pena fare una ricerca con ``grep`` su tutto il kernel per la chiamata +di sistema esistente per verificare che non ci siano altri casi speciali. + + +Verifica +-------- + +Una nuova chiamata di sistema dev'essere, ovviamente, provata; è utile fornire +ai revisori un programma in spazio utente che mostri l'uso della chiamata di +sistema. Un buon modo per combinare queste cose è quello di aggiungere un +semplice programma di auto-verifica in una nuova cartella in +``tools/testing/selftests/``. + +Per una nuova chiamata di sistema, ovviamente, non ci sarà alcuna funzione +in libc e quindi il programma di verifica dovrà invocarla usando ``syscall()``; +inoltre, se la nuova chiamata di sistema prevede un nuova struttura dati +visibile in spazio utente, il file d'intestazione necessario dev'essere +installato al fine di compilare il programma. + +Assicuratevi che il programma di auto-verifica possa essere eseguito +correttamente su tutte le architetture supportate. Per esempio, verificate che +funzioni quando viene compilato per x86_64 (-m64), x86_32 (-m32) e x32 (-mx32). + +Al fine di una più meticolosa ed estesa verifica della nuova funzionalità, +dovreste considerare l'aggiunta di nuove verifica al progetto 'Linux Test', +oppure al progetto xfstests per cambiamenti relativi al filesystem. + + - https://linux-test-project.github.io/ + - git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git + + +Pagine man +---------- + +Tutte le nuove chiamate di sistema dovrebbero avere una pagina man completa, +idealmente usando i marcatori groff, ma anche il puro testo può andare. Se +state usando groff, è utile che includiate nella email di presentazione una +versione già convertita in formato ASCII: semplificherà la vita dei revisori. + +Le pagine man dovrebbero essere in copia-conoscenza verso +linux-man@vger.kernel.org +Per maggiori dettagli, leggere +https://www.kernel.org/doc/man-pages/patches.html + + +Non invocate chiamate di sistema dal kernel +------------------------------------------- + +Le chiamate di sistema sono, come già detto prima, punti di interazione fra +lo spazio utente e il kernel. Perciò, le chiamate di sistema come +``sys_xyzzy()`` o ``compat_sys_xyzzy()`` dovrebbero essere chiamate solo dallo +spazio utente attraverso la tabella syscall, ma non da nessun altro punto nel +kernel. Se la nuova funzionalità è utile all'interno del kernel, per esempio +dev'essere condivisa fra una vecchia e una nuova chiamata di sistema o +dev'essere utilizzata da una chiamata di sistema e la sua variante compatibile, +allora dev'essere implementata come una funzione di supporto +(*helper function*) (per esempio ``kern_xyzzy()``). Questa funzione potrà +essere chiamata dallo *stub* (``sys_xyzzy()``), dalla variante compatibile +(``compat_sys_xyzzy()``), e/o da altri parti del kernel. + +Sui sistemi x86 a 64-bit, a partire dalla versione v4.17 è un requisito +fondamentale quello di non invocare chiamate di sistema all'interno del kernel. +Esso usa una diversa convenzione per l'invocazione di chiamate di sistema dove +``struct pt_regs`` viene decodificata al volo in una funzione che racchiude +la chiamata di sistema la quale verrà eseguita successivamente. +Questo significa che verranno passati solo i parametri che sono davvero +necessari ad una specifica chiamata di sistema, invece che riempire ogni volta +6 registri del processore con contenuti presi dallo spazio utente (potrebbe +causare seri problemi nella sequenza di chiamate). + +Inoltre, le regole su come i dati possano essere usati potrebbero differire +fra il kernel e l'utente. Questo è un altro motivo per cui invocare +``sys_xyzzy()`` è generalmente una brutta idea. + +Eccezioni a questa regola vengono accettate solo per funzioni d'architetture +che surclassano quelle generiche, per funzioni d'architettura di compatibilità, +o per altro codice in arch/ + + +Riferimenti e fonti +------------------- + + - Articolo di Michael Kerris su LWN sull'uso dell'argomento flags nelle + chiamate di sistema: https://lwn.net/Articles/585415/ + - Articolo di Michael Kerris su LWN su come gestire flag sconosciuti in + una chiamata di sistema: https://lwn.net/Articles/588444/ + - Articolo di Jake Edge su LWN che descrive i limiti degli argomenti a 64-bit + delle chiamate di sistema: https://lwn.net/Articles/311630/ + - Una coppia di articoli di David Drysdale che descrivono i dettagli del + percorso implementativo di una chiamata di sistema per la versione v3.14: + + - https://lwn.net/Articles/604287/ + - https://lwn.net/Articles/604515/ + + - Requisiti specifici alle architetture sono discussi nella pagina man + :manpage:`syscall(2)` : + http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES + - Collezione di email di Linux Torvalds sui problemi relativi a ``ioctl()``: + http://yarchive.net/comp/linux/ioctl.html + - "Come non inventare interfacce del kernel", Arnd Bergmann, + http://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf + - Articolo di Michael Kerris su LWN sull'evitare nuovi usi di CAP_SYS_ADMIN: + https://lwn.net/Articles/486306/ + - Raccomandazioni da Andrew Morton circa il fatto che tutte le informazioni + su una nuova chiamata di sistema dovrebbero essere contenute nello stesso + filone di discussione di email: https://lkml.org/lkml/2014/7/24/641 + - Raccomandazioni da Michael Kerrisk circa il fatto che le nuove chiamate di + sistema dovrebbero avere una pagina man: https://lkml.org/lkml/2014/6/13/309 + - Consigli da Thomas Gleixner sul fatto che il collegamento all'architettura + x86 dovrebbe avvenire in un *commit* differente: + https://lkml.org/lkml/2014/11/19/254 + - Consigli da Greg Kroah-Hartman circa la bontà d'avere una pagina man e un + programma di auto-verifica per le nuove chiamate di sistema: + https://lkml.org/lkml/2014/3/19/710 + - Discussione di Michael Kerrisk sulle nuove chiamate di sistema contro + le estensioni :manpage:`prctl(2)`: https://lkml.org/lkml/2014/6/3/411 + - Consigli da Ingo Molnar che le chiamate di sistema con più argomenti + dovrebbero incapsularli in una struttura che includa un argomento + *size* per garantire l'estensibilità futura: + https://lkml.org/lkml/2015/7/30/117 + - Un certo numero di casi strani emersi dall'uso (riuso) dei flag O_*: + + - commit 75069f2b5bfb ("vfs: renumber FMODE_NONOTIFY and add to uniqueness + check") + - commit 12ed2e36c98a ("fanotify: FMODE_NONOTIFY and __O_SYNC in sparc + conflict") + - commit bb458c644a59 ("Safer ABI for O_TMPFILE") + + - Discussion from Matthew Wilcox about restrictions on 64-bit arguments: + https://lkml.org/lkml/2008/12/12/187 + - Raccomandazioni da Greg Kroah-Hartman sul fatto che i flag sconosciuti dovrebbero + essere controllati: https://lkml.org/lkml/2014/7/17/577 + - Raccomandazioni da Linus Torvalds che le chiamate di sistema x32 dovrebbero + favorire la compatibilità con le versioni a 64-bit piuttosto che quelle a 32-bit: + https://lkml.org/lkml/2011/8/31/244 diff --git a/Documentation/translations/it_IT/process/applying-patches.rst b/Documentation/translations/it_IT/process/applying-patches.rst new file mode 100644 index 000000000000..f5e9c7d0b16d --- /dev/null +++ b/Documentation/translations/it_IT/process/applying-patches.rst @@ -0,0 +1,13 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/applying-patches.rst <applying_patches>` + + +.. _it_applying_patches: + +Applicare modifiche al kernel Linux +=================================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/changes.rst b/Documentation/translations/it_IT/process/changes.rst new file mode 100644 index 000000000000..956cf95a1214 --- /dev/null +++ b/Documentation/translations/it_IT/process/changes.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/changes.rst <changes>` + +.. _it_changes: + +Requisiti minimi per compilare il kernel +++++++++++++++++++++++++++++++++++++++++ + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/clang-format.rst b/Documentation/translations/it_IT/process/clang-format.rst new file mode 100644 index 000000000000..77eac809a639 --- /dev/null +++ b/Documentation/translations/it_IT/process/clang-format.rst @@ -0,0 +1,197 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/clang-format.rst <clangformat>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_clangformat: + +clang-format +============ +``clang-format`` è uno strumento per formattare codice C/C++/... secondo +un gruppo di regole ed euristiche. Come tutti gli strumenti, non è perfetto +e non copre tutti i singoli casi, ma è abbastanza buono per essere utile. + +``clang-format`` può essere usato per diversi fini: + + - Per riformattare rapidamente un blocco di codice secondo lo stile del + kernel. Particolarmente utile quando si sposta del codice e lo si + allinea/ordina. Vedere it_clangformatreformat_. + + - Identificare errori di stile, refusi e possibili miglioramenti nei + file che mantieni, le modifiche che revisioni, le differenze, + eccetera. Vedere it_clangformatreview_. + + - Ti aiuta a seguire lo stile del codice, particolarmente utile per i + nuovi arrivati o per coloro che lavorano allo stesso tempo su diversi + progetti con stili di codifica differenti. + +Il suo file di configurazione è ``.clang-format`` e si trova nella cartella +principale dei sorgenti del kernel. Le regole scritte in quel file tentano +di approssimare le lo stile di codifica del kernel. Si tenta anche di seguire +il più possibile +:ref:`Documentation/translations/it_IT/process/coding-style.rst <it_codingstyle>`. +Dato che non tutto il kernel segue lo stesso stile, potreste voler aggiustare +le regole di base per un particolare sottosistema o cartella. Per farlo, +potete sovrascriverle scrivendole in un altro file ``.clang-format`` in +una sottocartella. + +Questo strumento è già stato incluso da molto tempo nelle distribuzioni +Linux più popolari. Cercate ``clang-format`` nel vostro repositorio. +Altrimenti, potete scaricare una versione pre-generata dei binari di LLVM/clang +oppure generarlo dai codici sorgenti: + + http://releases.llvm.org/download.html + +Troverete più informazioni ai seguenti indirizzi: + + https://clang.llvm.org/docs/ClangFormat.html + + https://clang.llvm.org/docs/ClangFormatStyleOptions.html + + +.. _it_clangformatreview: + +Revisionare lo stile di codifica per file e modifiche +----------------------------------------------------- + +Eseguendo questo programma, potrete revisionare un intero sottosistema, +cartella o singoli file alla ricerca di errori di stile, refusi o +miglioramenti. + +Per farlo, potete eseguire qualcosa del genere:: + + # Make sure your working directory is clean! + clang-format -i kernel/*.[ch] + +E poi date un'occhiata a *git diff*. + +Osservare le righe di questo diff è utile a migliorare/aggiustare +le opzioni di stile nel file di configurazione; così come per verificare +le nuove funzionalità/versioni di ``clang-format``. + +``clang-format`` è in grado di leggere diversi diff unificati, quindi +potrete revisionare facilmente delle modifiche e *git diff*. +La documentazione si trova al seguente indirizzo: + + https://clang.llvm.org/docs/ClangFormat.html#script-for-patch-reformatting + +Per evitare che ``clang-format`` formatti alcune parti di un file, potete +scrivere nel codice:: + + int formatted_code; + // clang-format off + void unformatted_code ; + // clang-format on + void formatted_code_again; + +Nonostante si attraente l'idea di utilizzarlo per mantenere un file +sempre in sintonia con ``clang-format``, specialmente per file nuovi o +se siete un manutentore, ricordatevi che altre persone potrebbero usare +una versione diversa di ``clang-format`` oppure non utilizzarlo del tutto. +Quindi, dovreste trattenervi dall'usare questi marcatori nel codice del +kernel; almeno finché non vediamo che ``clang-format`` è diventato largamente +utilizzato. + + +.. _it_clangformatreformat: + +Riformattare blocchi di codice +------------------------------ + +Utilizzando dei plugin per il vostro editor, potete riformattare una +blocco (selezione) di codice con una singola combinazione di tasti. +Questo è particolarmente utile: quando si riorganizza il codice, per codice +complesso, macro multi-riga (e allineare le loro "barre"), eccetera. + +Ricordatevi che potete sempre aggiustare le modifiche in quei casi dove +questo strumento non ha fatto un buon lavoro. Ma come prima approssimazione, +può essere davvero molto utile. + +Questo programma si integra con molti dei più popolari editor. Alcuni di +essi come vim, emacs, BBEdit, Visaul Studio, lo supportano direttamente. +Al seguente indirizzo troverete le istruzioni: + + https://clang.llvm.org/docs/ClangFormat.html + +Per Atom, Eclipse, Sublime Text, Visual Studio Code, XCode e altri editor +e IDEs dovreste essere in grado di trovare dei plugin pronti all'uso. + +Per questo caso d'uso, considerate l'uso di un secondo ``.clang-format`` +che potete personalizzare con le vostre opzioni. +Consultare it_clangformatextra_. + + +.. _it_clangformatmissing: + +Cose non supportate +------------------- + +``clang-format`` non ha il supporto per alcune cose che sono comuni nel +codice del kernel. Sono facili da ricordare; quindi, se lo usate +regolarmente, imparerete rapidamente a evitare/ignorare certi problemi. + +In particolare, quelli più comuni che noterete sono: + + - Allineamento di ``#define`` su una singola riga, per esempio:: + + #define TRACING_MAP_BITS_DEFAULT 11 + #define TRACING_MAP_BITS_MAX 17 + #define TRACING_MAP_BITS_MIN 7 + + contro:: + + #define TRACING_MAP_BITS_DEFAULT 11 + #define TRACING_MAP_BITS_MAX 17 + #define TRACING_MAP_BITS_MIN 7 + + - Allineamento dei valori iniziali, per esempio:: + + static const struct file_operations uprobe_events_ops = { + .owner = THIS_MODULE, + .open = probes_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = probes_write, + }; + + contro:: + + static const struct file_operations uprobe_events_ops = { + .owner = THIS_MODULE, + .open = probes_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = probes_write, + }; + + +.. _it_clangformatextra: + +Funzionalità e opzioni aggiuntive +--------------------------------- + +Al fine di minimizzare le differenze fra il codice attuale e l'output +del programma, alcune opzioni di stile e funzionalità non sono abilitate +nella configurazione base. In altre parole, lo scopo è di rendere le +differenze le più piccole possibili, permettendo la semplificazione +della revisione di file, differenze e modifiche. + +In altri casi (per esempio un particolare sottosistema/cartella/file), lo +stile del kernel potrebbe essere diverso e abilitare alcune di queste +opzioni potrebbe dare risultati migliori. + +Per esempio: + + - Allineare assegnamenti (``AlignConsecutiveAssignments``). + + - Allineare dichiarazioni (``AlignConsecutiveDeclarations``). + + - Riorganizzare il testo nei commenti (``ReflowComments``). + + - Ordinare gli ``#include`` (``SortIncludes``). + +Piuttosto che per interi file, solitamente sono utili per la riformattazione +di singoli blocchi. In alternativa, potete creare un altro file +``.clang-format`` da utilizzare con il vostro editor/IDE. diff --git a/Documentation/translations/it_IT/process/code-of-conduct.rst b/Documentation/translations/it_IT/process/code-of-conduct.rst new file mode 100644 index 000000000000..7dbd7f55f37c --- /dev/null +++ b/Documentation/translations/it_IT/process/code-of-conduct.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/code-of-conduct.rst <code_of_conduct>` + +.. _it_code_of_conduct: + +Accordo dei contributori sul codice di condotta ++++++++++++++++++++++++++++++++++++++++++++++++ + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/coding-style.rst b/Documentation/translations/it_IT/process/coding-style.rst new file mode 100644 index 000000000000..b707bdbe178c --- /dev/null +++ b/Documentation/translations/it_IT/process/coding-style.rst @@ -0,0 +1,1094 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/coding-style.rst <codingstyle>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_codingstyle: + +Stile del codice per il kernel Linux +==================================== + +Questo è un breve documento che descrive lo stile di codice preferito per +il kernel Linux. Lo stile di codifica è molto personale e non voglio +**forzare** nessuno ad accettare il mio, ma questo stile è quello che +dev'essere usato per qualsiasi cosa che io sia in grado di mantenere, e l'ho +preferito anche per molte altre cose. Per favore, almeno tenete in +considerazione le osservazioni espresse qui. + +La prima cosa che suggerisco è quella di stamparsi una copia degli standard +di codifica GNU e di NON leggerla. Bruciatela, è un grande gesto simbolico. + +Comunque, ecco i punti: + +1) Indentazione +--------------- + +La tabulazione (tab) è di 8 caratteri e così anche le indentazioni. Ci sono +alcuni movimenti di eretici che vorrebbero l'indentazione a 4 (o perfino 2!) +caratteri di profondità, che è simile al tentativo di definire il valore del +pi-greco a 3. + +Motivazione: l'idea dell'indentazione è di definire chiaramente dove un blocco +di controllo inizia e finisce. Specialmente quando siete rimasti a guardare lo +schermo per 20 ore a file, troverete molto più facile capire i livelli di +indentazione se questi sono larghi. + +Ora, alcuni rivendicano che un'indentazione da 8 caratteri sposta il codice +troppo a destra e che quindi rende difficile la lettura su schermi a 80 +caratteri. La risposta a questa affermazione è che se vi servono più di 3 +livelli di indentazione, siete comunque fregati e dovreste correggere il vostro +programma. + +In breve, l'indentazione ad 8 caratteri rende più facile la lettura, e in +aggiunta vi avvisa quando state annidando troppo le vostre funzioni. +Tenete ben a mente questo avviso. + +Al fine di facilitare l'indentazione del costrutto switch, si preferisce +allineare sulla stessa colonna la parola chiave ``switch`` e i suoi +subordinati ``case``. In questo modo si evita una doppia indentazione per +i ``case``. Un esempio.: + +.. code-block:: c + + switch (suffix) { + case 'G': + case 'g': + mem <<= 30; + break; + case 'M': + case 'm': + mem <<= 20; + break; + case 'K': + case 'k': + mem <<= 10; + /* fall through */ + default: + break; + } + +A meno che non vogliate nascondere qualcosa, non mettete più istruzioni sulla +stessa riga: + +.. code-block:: c + + if (condition) do_this; + do_something_everytime; + +né mettete più assegnamenti sulla stessa riga. Lo stile del kernel +è ultrasemplice. Evitate espressioni intricate. + +Al di fuori dei commenti, della documentazione ed escludendo i Kconfig, gli +spazi non vengono mai usati per l'indentazione, e l'esempio qui sopra è +volutamente errato. + +Procuratevi un buon editor di testo e non lasciate spazi bianchi alla fine +delle righe. + + +2) Spezzare righe lunghe e stringhe +----------------------------------- + +Lo stile del codice riguarda la leggibilità e la manutenibilità utilizzando +strumenti comuni. + +Il limite delle righe è di 80 colonne e questo e un limite fortemente +desiderato. + +Espressioni più lunghe di 80 colonne saranno spezzettate in pezzi più piccoli, +a meno che eccedere le 80 colonne non aiuti ad aumentare la leggibilità senza +nascondere informazioni. I pezzi derivati sono sostanzialmente più corti degli +originali e vengono posizionati più a destra. Lo stesso si applica, nei file +d'intestazione, alle funzioni con una lista di argomenti molto lunga. Tuttavia, +non spezzettate mai le stringhe visibili agli utenti come i messaggi di +printk, questo perché inibireste la possibilità d'utilizzare grep per cercarle. + +3) Posizionamento di parentesi graffe e spazi +--------------------------------------------- + +Un altro problema che s'affronta sempre quando si parla di stile in C è +il posizionamento delle parentesi graffe. Al contrario della dimensione +dell'indentazione, non ci sono motivi tecnici sulla base dei quali scegliere +una strategia di posizionamento o un'altra; ma il modo qui preferito, +come mostratoci dai profeti Kernighan e Ritchie, è quello di +posizionare la parentesi graffa di apertura per ultima sulla riga, e quella +di chiusura per prima su una nuova riga, così: + +.. code-block:: c + + if (x is true) { + we do y + } + +Questo è valido per tutte le espressioni che non siano funzioni (if, switch, +for, while, do). Per esempio: + +.. code-block:: c + + switch (action) { + case KOBJ_ADD: + return "add"; + case KOBJ_REMOVE: + return "remove"; + case KOBJ_CHANGE: + return "change"; + default: + return NULL; + } + +Tuttavia, c'è il caso speciale, le funzioni: queste hanno la parentesi graffa +di apertura all'inizio della riga successiva, quindi: + +.. code-block:: c + + int function(int x) + { + body of function + } + +Eretici da tutto il mondo affermano che questa incoerenza è ... +insomma ... incoerente, ma tutte le persone ragionevoli sanno che (a) +K&R hanno **ragione** e (b) K&R hanno ragione. A parte questo, le funzioni +sono comunque speciali (non potete annidarle in C). + +Notate che la graffa di chiusura è da sola su una riga propria, ad +**eccezione** di quei casi dove è seguita dalla continuazione della stessa +espressione, in pratica ``while`` nell'espressione do-while, oppure ``else`` +nell'espressione if-else, come questo: + +.. code-block:: c + + do { + body of do-loop + } while (condition); + +e + +.. code-block:: c + + if (x == y) { + .. + } else if (x > y) { + ... + } else { + .... + } + +Motivazione: K&R. + +Inoltre, notate che questo posizionamento delle graffe minimizza il numero +di righe vuote senza perdere di leggibilità. In questo modo, dato che le +righe sul vostro schermo non sono una risorsa illimitata (pensate ad uno +terminale con 25 righe), avrete delle righe vuote da riempire con dei +commenti. + +Non usate inutilmente le graffe dove una singola espressione è sufficiente. + +.. code-block:: c + + if (condition) + action(); + +e + +.. code-block:: none + + if (condition) + do_this(); + else + do_that(); + +Questo non vale nel caso in cui solo un ramo dell'espressione if-else +contiene una sola espressione; in quest'ultimo caso usate le graffe per +entrambe i rami: + +.. code-block:: c + + if (condition) { + do_this(); + do_that(); + } else { + otherwise(); + } + +Inoltre, usate le graffe se un ciclo contiene più di una semplice istruzione: + +.. code-block:: c + + while (condition) { + if (test) + do_something(); + } + +3.1) Spazi +********** + +Lo stile del kernel Linux per quanto riguarda gli spazi, dipende +(principalmente) dalle funzioni e dalle parole chiave. Usate una spazio dopo +(quasi tutte) le parole chiave. L'eccezioni più evidenti sono sizeof, typeof, +alignof, e __attribute__, il cui aspetto è molto simile a quello delle +funzioni (e in Linux, solitamente, sono usate con le parentesi, anche se il +linguaggio non lo richiede; come ``sizeof info`` dopo aver dichiarato +``struct fileinfo info``). + +Quindi utilizzate uno spazio dopo le seguenti parole chiave:: + + if, switch, case, for, do, while + +ma non con sizeof, typeof, alignof, o __attribute__. Ad esempio, + +.. code-block:: c + + + s = sizeof(struct file); + +Non aggiungete spazi attorno (dentro) ad un'espressione fra parentesi. Questo +esempio è **brutto**: + +.. code-block:: c + + + s = sizeof( struct file ); + +Quando dichiarate un puntatore ad una variabile o una funzione che ritorna un +puntatore, il posto suggerito per l'asterisco ``*`` è adiacente al nome della +variabile o della funzione, e non adiacente al nome del tipo. Esempi: + +.. code-block:: c + + + char *linux_banner; + unsigned long long memparse(char *ptr, char **retptr); + char *match_strdup(substring_t *s); + +Usate uno spazio attorno (da ogni parte) alla maggior parte degli operatori +binari o ternari, come i seguenti:: + + = + - < > * / % | & ^ <= >= == != ? : + +ma non mettete spazi dopo gli operatori unari:: + + & * + - ~ ! sizeof typeof alignof __attribute__ defined + +nessuno spazio dopo l'operatore unario suffisso di incremento o decremento:: + + ++ -- + +nessuno spazio dopo l'operatore unario prefisso di incremento o decremento:: + + ++ -- + +e nessuno spazio attorno agli operatori dei membri di una struttura ``.`` e +``->``. + +Non lasciate spazi bianchi alla fine delle righe. Alcuni editor con +l'indentazione ``furba`` inseriranno gli spazi bianchi all'inizio di una nuova +riga in modo appropriato, quindi potrete scrivere la riga di codice successiva +immediatamente. Tuttavia, alcuni di questi stessi editor non rimuovono +questi spazi bianchi quando non scrivete nulla sulla nuova riga, ad esempio +perché volete lasciare una riga vuota. Il risultato è che finirete per avere +delle righe che contengono spazi bianchi in coda. + +Git vi avviserà delle modifiche che aggiungono questi spazi vuoti di fine riga, +e può opzionalmente rimuoverli per conto vostro; tuttavia, se state applicando +una serie di modifiche, questo potrebbe far fallire delle modifiche successive +perché il contesto delle righe verrà cambiato. + +4) Assegnare nomi +----------------- + +C è un linguaggio spartano, e così dovrebbero esserlo i vostri nomi. Al +contrario dei programmatori Modula-2 o Pascal, i programmatori C non usano +nomi graziosi come ThisVariableIsATemporaryCounter. Un programmatore C +chiamerebbe questa variabile ``tmp``, che è molto più facile da scrivere e +non è una delle più difficili da capire. + +TUTTAVIA, nonostante i nomi con notazione mista siano da condannare, i nomi +descrittivi per variabili globali sono un dovere. Chiamare una funzione +globale ``pippo`` è un insulto. + +Le variabili GLOBALI (da usare solo se vi servono **davvero**) devono avere +dei nomi descrittivi, così come le funzioni globali. Se avete una funzione +che conta gli utenti attivi, dovreste chiamarla ``count_active_users()`` o +qualcosa di simile, **non** dovreste chiamarla ``cntusr()``. + +Codificare il tipo di funzione nel suo nome (quella cosa chiamata notazione +ungherese) fa male al cervello - il compilatore conosce comunque il tipo e +può verificarli, e inoltre confonde i programmatori. Non c'è da +sorprendersi che MicroSoft faccia programmi bacati. + +Le variabili LOCALI dovrebbero avere nomi corti, e significativi. Se avete +un qualsiasi contatore di ciclo, probabilmente sarà chiamato ``i``. +Chiamarlo ``loop_counter`` non è produttivo, non ci sono possibilità che +``i`` possa non essere capito. Analogamente, ``tmp`` può essere una qualsiasi +variabile che viene usata per salvare temporaneamente un valore. + +Se avete paura di fare casino coi nomi delle vostre variabili locali, allora +avete un altro problema che è chiamato sindrome dello squilibrio dell'ormone +della crescita delle funzioni. Vedere il capitolo 6 (funzioni). + +5) Definizione di tipi (typedef) +-------------------------------- + +Per favore non usate cose come ``vps_t``. +Usare il typedef per strutture e puntatori è uno **sbaglio**. Quando vedete: + +.. code-block:: c + + vps_t a; + +nei sorgenti, cosa significa? +Se, invece, dicesse: + +.. code-block:: c + + struct virtual_container *a; + +potreste dire cos'è effettivamente ``a``. + +Molte persone pensano che la definizione dei tipi ``migliori la leggibilità``. +Non molto. Sono utili per: + + (a) gli oggetti completamente opachi (dove typedef viene proprio usato allo + scopo di **nascondere** cosa sia davvero l'oggetto). + + Esempio: ``pte_t`` eccetera sono oggetti opachi che potete usare solamente + con le loro funzioni accessorie. + + .. note:: + Gli oggetti opachi e le ``funzioni accessorie`` non sono, di per se, + una bella cosa. Il motivo per cui abbiamo cose come pte_t eccetera è + che davvero non c'è alcuna informazione portabile. + + (b) i tipi chiaramente interi, dove l'astrazione **aiuta** ad evitare + confusione sul fatto che siano ``int`` oppure ``long``. + + u8/u16/u32 sono typedef perfettamente accettabili, anche se ricadono + nella categoria (d) piuttosto che in questa. + + .. note:: + + Ancora - dev'esserci una **ragione** per farlo. Se qualcosa è + ``unsigned long``, non c'è alcun bisogno di avere: + + typedef unsigned long myfalgs_t; + + ma se ci sono chiare circostanze in cui potrebbe essere ``unsigned int`` + e in altre configurazioni ``unsigned long``, allora certamente typedef + è una buona scelta. + + (c) quando di rado create letteralmente dei **nuovi** tipi su cui effettuare + verifiche. + + (d) circostanze eccezionali, in cui si definiscono nuovi tipi identici a + quelli definiti dallo standard C99. + + Nonostante ci voglia poco tempo per abituare occhi e cervello all'uso dei + tipi standard come ``uint32_t``, alcune persone ne obiettano l'uso. + + Perciò, i tipi specifici di Linux ``u8/u16/u32/u64`` e i loro equivalenti + con segno, identici ai tipi standard, sono permessi- tuttavia, non sono + obbligatori per il nuovo codice. + + (e) i tipi sicuri nella spazio utente. + + In alcune strutture dati visibili dallo spazio utente non possiamo + richiedere l'uso dei tipi C99 e nemmeno i vari ``u32`` descritti prima. + Perciò, utilizziamo __u32 e tipi simili in tutte le strutture dati + condivise con lo spazio utente. + +Magari ci sono altri casi validi, ma la regola di base dovrebbe essere di +non usare MAI MAI un typedef a meno che non rientri in una delle regole +descritte qui. + +In generale, un puntatore, o una struttura a cui si ha accesso diretto in +modo ragionevole, non dovrebbero **mai** essere definite con un typedef. + +6) Funzioni +----------- + +Le funzioni dovrebbero essere brevi e carine, e fare una cosa sola. Dovrebbero +occupare uno o due schermi di testo (come tutti sappiamo, la dimensione +di uno schermo secondo ISO/ANSI è di 80x24), e fare una cosa sola e bene. + +La massima lunghezza di una funziona è inversamente proporzionale alla sua +complessità e al livello di indentazione di quella funzione. Quindi, se avete +una funzione che è concettualmente semplice ma che è implementata come un +lunga (ma semplice) sequenza di caso-istruzione, dove avete molte piccole cose +per molti casi differenti, allora va bene avere funzioni più lunghe. + +Comunque, se avete una funzione complessa e sospettate che uno studente +non particolarmente dotato del primo anno delle scuole superiori potrebbe +non capire cosa faccia la funzione, allora dovreste attenervi strettamente ai +limiti. Usate funzioni di supporto con nomi descrittivi (potete chiedere al +compilatore di renderle inline se credete che sia necessario per le +prestazioni, e probabilmente farà un lavoro migliore di quanto avreste potuto +fare voi). + +Un'altra misura delle funzioni sono il numero di variabili locali. Non +dovrebbero eccedere le 5-10, oppure state sbagliando qualcosa. Ripensate la +funzione, e dividetela in pezzettini. Generalmente, un cervello umano può +seguire facilmente circa 7 cose diverse, di più lo confonderebbe. Lo sai +d'essere brillante, ma magari vorresti riuscire a capire cos'avevi fatto due +settimane prima. + +Nei file sorgenti, separate le funzioni con una riga vuota. Se la funzione è +esportata, la macro **EXPORT** per questa funzione deve seguire immediatamente +la riga della parentesi graffa di chiusura. Ad esempio: + +.. code-block:: c + + int system_is_up(void) + { + return system_state == SYSTEM_RUNNING; + } + EXPORT_SYMBOL(system_is_up); + +Nei prototipi di funzione, includete i nomi dei parametri e i loro tipi. +Nonostante questo non sia richiesto dal linguaggio C, in Linux viene preferito +perché è un modo semplice per aggiungere informazioni importanti per il +lettore. + +7) Centralizzare il ritorno delle funzioni +------------------------------------------ + +Sebbene sia deprecata da molte persone, l'istruzione goto è impiegata di +frequente dai compilatori sotto forma di salto incondizionato. + +L'istruzione goto diventa utile quando una funzione ha punti d'uscita multipli +e vanno eseguite alcune procedure di pulizia in comune. Se non è necessario +pulire alcunché, allora ritornate direttamente. + +Assegnate un nome all'etichetta di modo che suggerisca cosa fa la goto o +perché esiste. Un esempio di un buon nome potrebbe essere ``out_free_buffer:`` +se la goto libera (free) un ``buffer``. Evitate l'uso di nomi GW-BASIC come +``err1:`` ed ``err2:``, potreste doverli riordinare se aggiungete o rimuovete +punti d'uscita, e inoltre rende difficile verificarne la correttezza. + +I motivo per usare le goto sono: + +- i salti incondizionati sono più facili da capire e seguire +- l'annidamento si riduce +- si evita di dimenticare, per errore, di aggiornare un singolo punto d'uscita +- aiuta il compilatore ad ottimizzare il codice ridondante ;) + +.. code-block:: c + + int fun(int a) + { + int result = 0; + char *buffer; + + buffer = kmalloc(SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + if (condition1) { + while (loop1) { + ... + } + result = 1; + goto out_free_buffer; + } + ... + out_free_buffer: + kfree(buffer); + return result; + } + +Un baco abbastanza comune di cui bisogna prendere nota è il ``one err bugs`` +che assomiglia a questo: + +.. code-block:: c + + err: + kfree(foo->bar); + kfree(foo); + return ret; + +Il baco in questo codice è che in alcuni punti d'uscita la variabile ``foo`` è +NULL. Normalmente si corregge questo baco dividendo la gestione dell'errore in +due parti ``err_free_bar:`` e ``err_free_foo:``: + +.. code-block:: c + + err_free_bar: + kfree(foo->bar); + err_free_foo: + kfree(foo); + return ret; + +Idealmente, dovreste simulare condizioni d'errore per verificare i vostri +percorsi d'uscita. + + +8) Commenti +----------- + +I commenti sono una buona cosa, ma c'è anche il rischio di esagerare. MAI +spiegare COME funziona il vostro codice in un commento: è molto meglio +scrivere il codice di modo che il suo funzionamento sia ovvio, inoltre +spiegare codice scritto male è una perdita di tempo. + +Solitamente, i commenti devono dire COSA fa il codice, e non COME lo fa. +Inoltre, cercate di evitare i commenti nel corpo della funzione: se la +funzione è così complessa che dovete commentarla a pezzi, allora dovreste +tornare al punto 6 per un momento. Potete mettere dei piccoli commenti per +annotare o avvisare il lettore circa un qualcosa di particolarmente arguto +(o brutto), ma cercate di non esagerare. Invece, mettete i commenti in +testa alla funzione spiegando alle persone cosa fa, e possibilmente anche +il PERCHÉ. + +Per favore, quando commentate una funzione dell'API del kernel usate il +formato kernel-doc. Per maggiori dettagli, leggete i file in +:ref::ref:`Documentation/translations/it_IT/doc-guide/ <it_doc_guide>` e in +``script/kernel-doc``. + +Lo stile preferito per i commenti più lunghi (multi-riga) è: + +.. code-block:: c + + /* + * This is the preferred style for multi-line + * comments in the Linux kernel source code. + * Please use it consistently. + * + * Description: A column of asterisks on the left side, + * with beginning and ending almost-blank lines. + */ + +Per i file in net/ e in drivers/net/ lo stile preferito per i commenti +più lunghi (multi-riga) è leggermente diverso. + +.. code-block:: c + + /* The preferred comment style for files in net/ and drivers/net + * looks like this. + * + * It is nearly the same as the generally preferred comment style, + * but there is no initial almost-blank line. + */ + +È anche importante commentare i dati, sia per i tipi base che per tipi +derivati. A questo scopo, dichiarate un dato per riga (niente virgole +per una dichiarazione multipla). Questo vi lascerà spazio per un piccolo +commento per spiegarne l'uso. + + +9) Avete fatto un pasticcio +--------------------------- + +Va bene, li facciamo tutti. Probabilmente vi è stato detto dal vostro +aiutante Unix di fiducia che ``GNU emacs`` formatta automaticamente il +codice C per conto vostro, e avete notato che sì, in effetti lo fa, ma che +i modi predefiniti non sono proprio allettanti (infatti, sono peggio che +premere tasti a caso - un numero infinito di scimmie che scrivono in +GNU emacs non faranno mai un buon programma). + +Quindi, potete sbarazzarvi di GNU emacs, o riconfigurarlo con valori più +sensati. Per fare quest'ultima cosa, potete appiccicare il codice che +segue nel vostro file .emacs: + +.. code-block:: none + + (defun c-lineup-arglist-tabs-only (ignored) + "Line up argument lists by tabs, not spaces" + (let* ((anchor (c-langelem-pos c-syntactic-element)) + (column (c-langelem-2nd-pos c-syntactic-element)) + (offset (- (1+ column) anchor)) + (steps (floor offset c-basic-offset))) + (* (max steps 1) + c-basic-offset))) + + (add-hook 'c-mode-common-hook + (lambda () + ;; Add kernel style + (c-add-style + "linux-tabs-only" + '("linux" (c-offsets-alist + (arglist-cont-nonempty + c-lineup-gcc-asm-reg + c-lineup-arglist-tabs-only)))))) + + (add-hook 'c-mode-hook + (lambda () + (let ((filename (buffer-file-name))) + ;; Enable kernel mode for the appropriate files + (when (and filename + (string-match (expand-file-name "~/src/linux-trees") + filename)) + (setq indent-tabs-mode t) + (setq show-trailing-whitespace t) + (c-set-style "linux-tabs-only"))))) + +Questo farà funzionare meglio emacs con lo stile del kernel per i file che +si trovano nella cartella ``~/src/linux-trees``. + +Ma anche se doveste fallire nell'ottenere una formattazione sensata in emacs +non tutto è perduto: usate ``indent``. + +Ora, ancora, GNU indent ha la stessa configurazione decerebrata di GNU emacs, +ed è per questo che dovete passargli alcune opzioni da riga di comando. +Tuttavia, non è così terribile, perché perfino i creatori di GNU indent +riconoscono l'autorità di K&R (le persone del progetto GNU non sono cattive, +sono solo mal indirizzate sull'argomento), quindi date ad indent le opzioni +``-kr -i8`` (che significa ``K&R, 8 caratteri di indentazione``), o utilizzate +``scripts/Lindent`` che indenterà usando l'ultimo stile. + +``indent`` ha un sacco di opzioni, e specialmente quando si tratta di +riformattare i commenti dovreste dare un'occhiata alle pagine man. +Ma ricordatevi: ``indent`` non è un correttore per una cattiva programmazione. + +Da notare che potete utilizzare anche ``clang-format`` per aiutarvi con queste +regole, per riformattare rapidamente ad automaticamente alcune parti del +vostro codice, e per revisionare interi file al fine di identificare errori +di stile, refusi e possibilmente anche delle migliorie. È anche utile per +ordinare gli ``#include``, per allineare variabili/macro, per ridistribuire +il testo e altre cose simili. +Per maggiori dettagli, consultate il file +:ref:`Documentation/translations/it_IT/process/clang-format.rst <it_clangformat>`. + + +10) File di configurazione Kconfig +---------------------------------- + +Per tutti i file di configurazione Kconfig* che si possono trovare nei +sorgenti, l'indentazione è un po' differente. Le linee dopo un ``config`` +sono indentate con un tab, mentre il testo descrittivo è indentato di +ulteriori due spazi. Esempio:: + + config AUDIT + bool "Auditing support" + depends on NET + help + Enable auditing infrastructure that can be used with another + kernel subsystem, such as SELinux (which requires this for + logging of avc messages output). Does not do system-call + auditing without CONFIG_AUDITSYSCALL. + +Le funzionalità davvero pericolose (per esempio il supporto alla scrittura +per certi filesystem) dovrebbero essere dichiarate chiaramente come tali +nella stringa di titolo:: + + config ADFS_FS_RW + bool "ADFS write support (DANGEROUS)" + depends on ADFS_FS + ... + +Per la documentazione completa sui file di configurazione, consultate +il documento Documentation/translations/it_IT/kbuild/kconfig-language.txt + + +11) Strutture dati +------------------ + +Le strutture dati che hanno una visibilità superiore al contesto del +singolo thread in cui vengono create e distrutte, dovrebbero sempre +avere un contatore di riferimenti. Nel kernel non esiste un +*garbage collector* (e fuori dal kernel i *garbage collector* sono lenti +e inefficienti), questo significa che **dovete** assolutamente avere un +contatore di riferimenti per ogni cosa che usate. + +Avere un contatore di riferimenti significa che potete evitare la +sincronizzazione e permette a più utenti di accedere alla struttura dati +in parallelo - e non doversi preoccupare di una struttura dati che +improvvisamente sparisce dalla loro vista perché il loro processo dormiva +o stava facendo altro per un attimo. + +Da notare che la sincronizzazione **non** si sostituisce al conteggio dei +riferimenti. La sincronizzazione ha lo scopo di mantenere le strutture +dati coerenti, mentre il conteggio dei riferimenti è una tecnica di gestione +della memoria. Solitamente servono entrambe le cose, e non vanno confuse fra +di loro. + +Quando si hanno diverse classi di utenti, le strutture dati possono avere +due livelli di contatori di riferimenti. Il contatore di classe conta +il numero dei suoi utenti, e il contatore globale viene decrementato una +sola volta quando il contatore di classe va a zero. + +Un esempio di questo tipo di conteggio dei riferimenti multi-livello può +essere trovato nella gestore della memoria (``struct mm_sturct``: mm_user e +mm_count), e nel codice dei filesystem (``struct super_block``: s_count e +s_active). + +Ricordatevi: se un altro thread può trovare la vostra struttura dati, e non +avete un contatore di riferimenti per essa, quasi certamente avete un baco. + +12) Macro, enumerati e RTL +--------------------------- + +I nomi delle macro che definiscono delle costanti e le etichette degli +enumerati sono scritte in maiuscolo. + +.. code-block:: c + + #define CONSTANT 0x12345 + +Gli enumerati sono da preferire quando si definiscono molte costanti correlate. + +I nomi delle macro in MAIUSCOLO sono preferibili ma le macro che assomigliano +a delle funzioni possono essere scritte in minuscolo. + +Generalmente, le funzioni inline sono preferibili rispetto alle macro che +sembrano funzioni. + +Le macro che contengono più istruzioni dovrebbero essere sempre chiuse in un +blocco do - while: + +.. code-block:: c + + #define macrofun(a, b, c) \ + do { \ + if (a == 5) \ + do_this(b, c); \ + } while (0) + +Cose da evitare quando si usano le macro: + +1) le macro che hanno effetti sul flusso del codice: + +.. code-block:: c + + #define FOO(x) \ + do { \ + if (blah(x) < 0) \ + return -EBUGGERED; \ + } while (0) + +sono **proprio** una pessima idea. Sembra una chiamata a funzione ma termina +la funzione chiamante; non cercate di rompere il decodificatore interno di +chi legge il codice. + +2) le macro che dipendono dall'uso di una variabile locale con un nome magico: + +.. code-block:: c + + #define FOO(val) bar(index, val) + +potrebbe sembrare una bella cosa, ma è dannatamente confusionario quando uno +legge il codice e potrebbe romperlo con una cambiamento che sembra innocente. + +3) le macro con argomenti che sono utilizzati come l-values; questo potrebbe +ritorcervisi contro se qualcuno, per esempio, trasforma FOO in una funzione +inline. + +4) dimenticatevi delle precedenze: le macro che definiscono espressioni devono +essere racchiuse fra parentesi. State attenti a problemi simili con le macro +parametrizzate. + +.. code-block:: c + + #define CONSTANT 0x4000 + #define CONSTEXP (CONSTANT | 3) + +5) collisione nello spazio dei nomi quando si definisce una variabile locale in +una macro che sembra una funzione: + +.. code-block:: c + + #define FOO(x) \ + ({ \ + typeof(x) ret; \ + ret = calc_ret(x); \ + (ret); \ + }) + +ret è un nome comune per una variabile locale - __foo_ret difficilmente +andrà in conflitto con una variabile già esistente. + +Il manuale di cpp si occupa esaustivamente delle macro. Il manuale di sviluppo +di gcc copre anche l'RTL che viene usato frequentemente nel kernel per il +linguaggio assembler. + +13) Visualizzare i messaggi del kernel +-------------------------------------- + +Agli sviluppatori del kernel piace essere visti come dotti. Tenete un occhio +di riguardo per l'ortografia e farete una belle figura. In inglese, evitate +l'uso di parole mozzate come ``dont``: usate ``do not`` oppure ``don't``. +Scrivete messaggi concisi, chiari, e inequivocabili. + +I messaggi del kernel non devono terminare con un punto fermo. + +Scrivere i numeri fra parentesi (%d) non migliora alcunché e per questo +dovrebbero essere evitati. + +Ci sono alcune macro per la diagnostica in <linux/device.h> che dovreste +usare per assicurarvi che i messaggi vengano associati correttamente ai +dispositivi e ai driver, e che siano etichettati correttamente: dev_err(), +dev_warn(), dev_info(), e così via. Per messaggi che non sono associati ad +alcun dispositivo, <linux/printk.h> definisce pr_info(), pr_warn(), pr_err(), +eccetera. + +Tirar fuori un buon messaggio di debug può essere una vera sfida; e quando +l'avete può essere d'enorme aiuto per risolvere problemi da remoto. +Tuttavia, i messaggi di debug sono gestiti differentemente rispetto agli +altri. Le funzioni pr_XXX() stampano incondizionatamente ma pr_debug() no; +essa non viene compilata nella configurazione predefinita, a meno che +DEBUG o CONFIG_DYNAMIC_DEBUG non vengono impostati. Questo vale anche per +dev_dbg() e in aggiunta VERBOSE_DEBUG per aggiungere i messaggi dev_vdbg(). + +Molti sottosistemi hanno delle opzioni di debug in Kconfig che aggiungono +-DDEBUG nei corrispettivi Makefile, e in altri casi aggiungono #define DEBUG +in specifici file. Infine, quando un messaggio di debug dev'essere stampato +incondizionatamente, per esempio perché siete già in una sezione di debug +racchiusa in #ifdef, potete usare printk(KERN_DEBUG ...). + +14) Assegnare memoria +--------------------- + +Il kernel fornisce i seguenti assegnatori ad uso generico: +kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), e vzalloc(). +Per maggiori informazioni, consultate la documentazione dell'API. + +Il modo preferito per passare la dimensione di una struttura è il seguente: + +.. code-block:: c + + p = kmalloc(sizeof(*p), ...); + +La forma alternativa, dove il nome della struttura viene scritto interamente, +peggiora la leggibilità e introduce possibili bachi quando il tipo di +puntatore cambia tipo ma il corrispondente sizeof non viene aggiornato. + +Il valore di ritorno è un puntatore void, effettuare un cast su di esso è +ridondante. La conversione fra un puntatore void e un qualsiasi altro tipo +di puntatore è garantito dal linguaggio di programmazione C. + +Il modo preferito per assegnare un vettore è il seguente: + +.. code-block:: c + + p = kmalloc_array(n, sizeof(...), ...); + +Il modo preferito per assegnare un vettore a zero è il seguente: + +.. code-block:: c + + p = kcalloc(n, sizeof(...), ...); + +Entrambe verificano la condizione di overflow per la dimensione +d'assegnamento n * sizeof(...), se accade ritorneranno NULL. + +15) Il morbo inline +------------------- + +Sembra che ci sia la percezione errata che gcc abbia una qualche magica +opzione "rendimi più veloce" chiamata ``inline``. In alcuni casi l'uso di +inline è appropriato (per esempio in sostituzione delle macro, vedi +capitolo 12), ma molto spesso non lo è. L'uso abbondante della parola chiave +inline porta ad avere un kernel più grande, che si traduce in un sistema nel +suo complesso più lento per via di una cache per le istruzioni della CPU più +grande e poi semplicemente perché ci sarà meno spazio disponibile per una +pagina di cache. Pensateci un attimo; una fallimento nella cache causa una +ricerca su disco che può tranquillamente richiedere 5 millisecondi. Ci sono +TANTI cicli di CPU che potrebbero essere usati in questi 5 millisecondi. + +Spesso le persone dicono che aggiungere inline a delle funzioni dichiarate +static e utilizzare una sola volta è sempre una scelta vincente perché non +ci sono altri compromessi. Questo è tecnicamente vero ma gcc è in grado di +trasformare automaticamente queste funzioni in inline; i problemi di +manutenzione del codice per rimuovere gli inline quando compare un secondo +utente surclassano il potenziale vantaggio nel suggerire a gcc di fare una +cosa che avrebbe fatto comunque. + +16) Nomi e valori di ritorno delle funzioni +------------------------------------------- + +Le funzioni possono ritornare diversi tipi di valori, e uno dei più comuni +è quel valore che indica se una funzione ha completato con successo o meno. +Questo valore può essere rappresentato come un codice di errore intero +(-Exxx = fallimento, 0 = successo) oppure un booleano di successo +(0 = fallimento, non-zero = successo). + +Mischiare questi due tipi di rappresentazioni è un terreno fertile per +i bachi più insidiosi. Se il linguaggio C includesse una forte distinzione +fra gli interi e i booleani, allora il compilatore potrebbe trovare questi +errori per conto nostro ... ma questo non c'è. Per evitare di imbattersi +in questo tipo di baco, seguite sempre la seguente convenzione:: + + Se il nome di una funzione è un'azione o un comando imperativo, + essa dovrebbe ritornare un codice di errore intero. Se il nome + è un predicato, la funzione dovrebbe ritornare un booleano di + "successo" + +Per esempio, ``add work`` è un comando, e la funzione add_work() ritorna 0 +in caso di successo o -EBUSY in caso di fallimento. Allo stesso modo, +``PCI device present`` è un predicato, e la funzione pci_dev_present() ritorna +1 se trova il dispositivo corrispondente con successo, altrimenti 0. + +Tutte le funzioni esportate (EXPORT) devono rispettare questa convenzione, e +così dovrebbero anche tutte le funzioni pubbliche. Le funzioni private +(static) possono non seguire questa convenzione, ma è comunque raccomandato +che lo facciano. + +Le funzioni il cui valore di ritorno è il risultato di una computazione, +piuttosto che l'indicazione sul successo di tale computazione, non sono +soggette a questa regola. Solitamente si indicano gli errori ritornando un +qualche valore fuori dai limiti. Un tipico esempio è quello delle funzioni +che ritornano un puntatore; queste utilizzano NULL o ERR_PTR come meccanismo +di notifica degli errori. + +17) Non reinventate le macro del kernel +--------------------------------------- + +Il file di intestazione include/linux/kernel.h contiene un certo numero +di macro che dovreste usare piuttosto che implementarne una qualche variante. +Per esempio, se dovete calcolare la lunghezza di un vettore, sfruttate la +macro: + +.. code-block:: c + + #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +Analogamente, se dovete calcolare la dimensione di un qualche campo di una +struttura, usate + +.. code-block:: c + + #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + +Ci sono anche le macro min() e max() che, se vi serve, effettuano un controllo +rigido sui tipi. Sentitevi liberi di leggere attentamente questo file +d'intestazione per scoprire cos'altro è stato definito che non dovreste +reinventare nel vostro codice. + +18) Linee di configurazione degli editor e altre schifezze +----------------------------------------------------------- + +Alcuni editor possono interpretare dei parametri di configurazione integrati +nei file sorgenti e indicati con dai marcatori speciali. Per esempio, emacs +interpreta le linee marcate nel seguente modo: + +.. code-block:: c + + -*- mode: c -*- + +O come queste: + +.. code-block:: c + + /* + Local Variables: + compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c" + End: + */ + +Vim interpreta i marcatori come questi: + +.. code-block:: c + + /* vim:set sw=8 noet */ + +Non includete nessuna di queste cose nei file sorgenti. Le persone hanno le +proprie configurazioni personali per l'editor, e i vostri sorgenti non +dovrebbero sovrascrivergliele. Questo vale anche per i marcatori +d'indentazione e di modalità d'uso. Le persone potrebbero aver configurato una +modalità su misura, oppure potrebbero avere qualche altra magia per far +funzionare bene l'indentazione. + +19) Inline assembly +--------------------- + +Nel codice specifico per un'architettura, potreste aver bisogno di codice +*inline assembly* per interfacciarvi col processore o con una funzionalità +specifica della piattaforma. Non esitate a farlo quando è necessario. +Comunque, non usatele gratuitamente quando il C può fare la stessa cosa. +Potete e dovreste punzecchiare l'hardware in C quando è possibile. + +Considerate la scrittura di una semplice funzione che racchiude pezzi comuni +di codice assembler piuttosto che continuare a riscrivere delle piccole +varianti. Ricordatevi che l' *inline assembly* può utilizzare i parametri C. + +Il codice assembler più corposo e non banale dovrebbe andare nei file .S, +coi rispettivi prototipi C definiti nei file d'intestazione. I prototipi C +per le funzioni assembler dovrebbero usare ``asmlinkage``. + +Potreste aver bisogno di marcare il vostro codice asm come volatile al fine +d'evitare che GCC lo rimuova quando pensa che non ci siano effetti collaterali. +Non c'è sempre bisogno di farlo, e farlo quando non serve limita le +ottimizzazioni. + +Quando scrivete una singola espressione *inline assembly* contenente più +istruzioni, mettete ognuna di queste istruzioni in una stringa e riga diversa; +ad eccezione dell'ultima stringa/istruzione, ognuna deve terminare con ``\n\t`` +al fine di allineare correttamente l'assembler che verrà generato: + +.. code-block:: c + + asm ("magic %reg1, #42\n\t" + "more_magic %reg2, %reg3" + : /* outputs */ : /* inputs */ : /* clobbers */); + +20) Compilazione sotto condizione +--------------------------------- + +Ovunque sia possibile, non usate le direttive condizionali del preprocessore +(#if, #ifdef) nei file .c; farlo rende il codice difficile da leggere e da +seguire. Invece, usate queste direttive nei file d'intestazione per definire +le funzioni usate nei file .c, fornendo i relativi stub nel caso #else, +e quindi chiamate queste funzioni senza condizioni di preprocessore. Il +compilatore non produrrà alcun codice per le funzioni stub, produrrà gli +stessi risultati, e la logica rimarrà semplice da seguire. + +È preferibile non compilare intere funzioni piuttosto che porzioni d'esse o +porzioni d'espressioni. Piuttosto che mettere una ifdef in un'espressione, +fattorizzate parte dell'espressione, o interamente, in funzioni e applicate +la direttiva condizionale su di esse. + +Se avete una variabile o funzione che potrebbe non essere usata in alcune +configurazioni, e quindi il compilatore potrebbe avvisarvi circa la definizione +inutilizzata, marcate questa definizione come __maybe_used piuttosto che +racchiuderla in una direttiva condizionale del preprocessore. (Comunque, +se una variabile o funzione è *sempre* inutilizzata, rimuovetela). + +Nel codice, dov'è possibile, usate la macro IS_ENABLED per convertire i +simboli Kconfig in espressioni booleane C, e quindi usatela nelle classiche +condizioni C: + +.. code-block:: c + + if (IS_ENABLED(CONFIG_SOMETHING)) { + ... + } + +Il compilatore valuterà la condizione come costante (constant-fold), e quindi +includerà o escluderà il blocco di codice come se fosse in un #ifdef, quindi +non ne aumenterà il tempo di esecuzione. Tuttavia, questo permette al +compilatore C di vedere il codice nel blocco condizionale e verificarne la +correttezza (sintassi, tipi, riferimenti ai simboli, eccetera). Quindi +dovete comunque utilizzare #ifdef se il codice nel blocco condizionale esiste +solo quando la condizione è soddisfatta. + +Alla fine di un blocco corposo di #if o #ifdef (più di alcune linee), +mettete un commento sulla stessa riga di #endif, annotando la condizione +che termina. Per esempio: + +.. code-block:: c + + #ifdef CONFIG_SOMETHING + ... + #endif /* CONFIG_SOMETHING */ + +Appendice I) riferimenti +------------------------ + +The C Programming Language, Second Edition +by Brian W. Kernighan and Dennis M. Ritchie. +Prentice Hall, Inc., 1988. +ISBN 0-13-110362-8 (paperback), 0-13-110370-9 (hardback). + +The Practice of Programming +by Brian W. Kernighan and Rob Pike. +Addison-Wesley, Inc., 1999. +ISBN 0-201-61586-X. + +Manuali GNU - nei casi in cui sono compatibili con K&R e questo documento - +per indent, cpp, gcc e i suoi dettagli interni, tutto disponibile qui +http://www.gnu.org/manual/ + +WG14 è il gruppo internazionale di standardizzazione per il linguaggio C, +URL: http://www.open-std.org/JTC1/SC22/WG14/ + +Kernel process/coding-style.rst, by greg@kroah.com at OLS 2002: +http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/ diff --git a/Documentation/translations/it_IT/process/development-process.rst b/Documentation/translations/it_IT/process/development-process.rst new file mode 100644 index 000000000000..f1a6eca30824 --- /dev/null +++ b/Documentation/translations/it_IT/process/development-process.rst @@ -0,0 +1,33 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/development-process.rst <development_process_main>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_development_process_main: + +Una guida al processo di sviluppo del Kernel +============================================ + +Contenuti: + +.. toctree:: + :numbered: + :maxdepth: 2 + + 1.Intro + 2.Process + 3.Early-stage + 4.Coding + 5.Posting + 6.Followthrough + 7.AdvancedTopics + 8.Conclusion + +Lo scopo di questo documento è quello di aiutare gli sviluppatori (ed i loro +supervisori) a lavorare con la communità di sviluppo con il minimo sforzo. È +un tentativo di documentare il funzionamento di questa communità in modo che +sia accessibile anche a coloro che non hanno famigliarità con lo sviluppo del +Kernel Linux (o, anzi, con lo sviluppo di software libero in generale). Benchè +qui sia presente del materiale tecnico, questa è una discussione rivolta in +particolare al procedimento, e quindi per essere compreso non richiede una +conoscenza approfondità sullo sviluppo del kernel. diff --git a/Documentation/translations/it_IT/process/email-clients.rst b/Documentation/translations/it_IT/process/email-clients.rst new file mode 100644 index 000000000000..224ab031ffd3 --- /dev/null +++ b/Documentation/translations/it_IT/process/email-clients.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/email-clients.rst <email_clients>` + +.. _it_email_clients: + +Informazioni sui programmi di posta elettronica per Linux +========================================================= + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/howto.rst b/Documentation/translations/it_IT/process/howto.rst new file mode 100644 index 000000000000..909e6a55bc43 --- /dev/null +++ b/Documentation/translations/it_IT/process/howto.rst @@ -0,0 +1,655 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/howto.rst <process_howto>` +:Translator: Alessia Mantegazza <amantegazza@vaga.pv.it> + +.. _it_process_howto: + +Come partecipare allo sviluppo del kernel Linux +=============================================== + +Questo è il documento fulcro di quanto trattato sull'argomento. +Esso contiene le istruzioni su come diventare uno sviluppatore +del kernel Linux e spiega come lavorare con la comunità di +sviluppo kernel Linux. Il documento non tratterà alcun aspetto +tecnico relativo alla programmazione del kernel, ma vi aiuterà +indirizzandovi sulla corretta strada. + +Se qualsiasi cosa presente in questo documento diventasse obsoleta, +vi preghiamo di inviare le correzioni agli amministratori di questo +file, indicati in fondo al presente documento. + +Introduzione +------------ +Dunque, volete imparare come diventare sviluppatori del kernel Linux? +O vi è stato detto dal vostro capo, "Vai, scrivi un driver Linux per +questo dispositivo". Bene, l'obbiettivo di questo documento è quello +di insegnarvi tutto ciò che dovete sapere per raggiungere il vostro +scopo descrivendo il procedimento da seguire e consigliandovi +su come lavorare con la comunità. Il documento cercherà, inoltre, +di spiegare alcune delle ragioni per le quali la comunità lavora in un +modo suo particolare. + +Il kernel è scritto prevalentemente nel linguaggio C con alcune parti +specifiche dell'architettura scritte in linguaggio assembly. +Per lo sviluppo kernel è richiesta una buona conoscenza del linguaggio C. +L'assembly (di qualsiasi architettura) non è richiesto, a meno che non +pensiate di fare dello sviluppo di basso livello per un'architettura. +Sebbene essi non siano un buon sostituto ad un solido studio del +linguaggio C o ad anni di esperienza, i seguenti libri sono, se non +altro, utili riferimenti: + +- "The C Programming Language" di Kernighan e Ritchie [Prentice Hall] +- "Practical C Programming" di Steve Oualline [O'Reilly] +- "C: A Reference Manual" di Harbison and Steele [Prentice Hall] + +Il kernel è stato scritto usando GNU C e la toolchain GNU. +Sebbene si attenga allo standard ISO C89, esso utilizza una serie di +estensioni che non sono previste in questo standard. Il kernel è un +ambiente C indipendente, che non ha alcuna dipendenza dalle librerie +C standard, così alcune parti del C standard non sono supportate. +Le divisioni ``long long`` e numeri in virgola mobile non sono permessi. +Qualche volta è difficile comprendere gli assunti che il kernel ha +riguardo gli strumenti e le estensioni in uso, e sfortunatamente non +esiste alcuna indicazione definitiva. Per maggiori informazioni, controllate, +la pagina `info gcc`. + +Tenete a mente che state cercando di apprendere come lavorare con la comunità +di sviluppo già esistente. Questo è un gruppo eterogeneo di persone, con alti +standard di codifica, di stile e di procedura. Questi standard sono stati +creati nel corso del tempo basandosi su quanto hanno riscontrato funzionare al +meglio per un squadra così grande e geograficamente sparsa. Cercate di +imparare, in anticipo, il più possibile circa questi standard, poichè ben +spiegati; non aspettatevi che gli altri si adattino al vostro modo di fare +o a quello della vostra azienda. + +Note legali +------------ +Il codice sorgente del kernel Linux è rilasciato sotto GPL. Siete pregati +di visionare il file, COPYING, presente nella cartella principale dei +sorgente, per eventuali dettagli sulla licenza. Se avete ulteriori domande +sulla licenza, contattate un avvocato, non chiedete sulle liste di discussione +del kernel Linux. Le persone presenti in queste liste non sono avvocati, +e non dovreste basarvi sulle loro dichiarazioni in materia giuridica. + +Per domande più frequenti e risposte sulla licenza GPL, guardare: + + https://www.gnu.org/licenses/gpl-faq.html + +Documentazione +-------------- +I sorgenti del kernel Linux hanno una vasta base di documenti che vi +insegneranno come interagire con la comunità del kernel. Quando nuove +funzionalità vengono aggiunte al kernel, si raccomanda di aggiungere anche i +relativi file di documentatione che spiegano come usarele. +Quando un cambiamento del kernel genera anche un cambiamento nell'interfaccia +con lo spazio utente, è raccomandabile che inviate una notifica o una +correzione alle pagine *man* spiegando tale modifica agli amministratori di +queste pagine all'indirizzo mtk.manpages@gmail.com, aggiungendo +in CC la lista linux-api@vger.kernel.org. + +Di seguito una lista di file che sono presenti nei sorgente del kernel e che +è richiesto che voi leggiate: + + :ref:`Documentation/translations/it_IT/admin-guide/README.rst <it_readme>` + Questo file da una piccola anteprima del kernel Linux e descrive il + minimo necessario per configurare e generare il kernel. I novizi + del kernel dovrebbero iniziare da qui. + + :ref:`Documentation/translations/it_IT/process/changes.rst <it_changes>` + + Questo file fornisce una lista dei pacchetti software necessari + a compilare e far funzionare il kernel con successo. + + :ref:`Documentation/translations/it_IT/process/coding-style.rst <it_codingstyle>` + + Questo file descrive lo stile della codifica per il kernel Linux, + e parte delle motivazioni che ne sono alla base. Tutto il nuovo codice deve + seguire le linee guida in questo documento. Molti amministratori + accetteranno patch solo se queste osserveranno tali regole, e molte + persone revisioneranno il codice solo se scritto nello stile appropriato. + + :ref:`Documentation/translations/it_IT/process/submitting-patches.rst <it_submittingpatches>` e + :ref:`Documentation/translations/it_IT/process/submitting-drivers.rst <it_submittingdrivers>` + + Questo file descrive dettagliatamente come creare ed inviare una patch + con successo, includendo (ma non solo questo): + + - Contenuto delle email + - Formato delle email + - I destinatari delle email + + Seguire tali regole non garantirà il successo (tutte le patch sono soggette + a controlli realitivi a contenuto e stile), ma non seguirle lo precluderà + sempre. + + Altre ottime descrizioni di come creare buone patch sono: + + "The Perfect Patch" + https://www.ozlabs.org/~akpm/stuff/tpp.txt + + "Linux kernel patch submission format" + http://linux.yyz.us/patch-format.html + + :ref:`Documentation/process/translations/it_IT/stable-api-nonsense.rst <it_stable_api_nonsense>` + + Questo file descrive la motivazioni sottostanti la conscia decisione di + non avere un API stabile all'interno del kernel, incluso cose come: + + - Sottosistemi shim-layers (per compatibilità?) + - Portabilità fra Sistemi Operativi dei driver. + - Attenuare i rapidi cambiamenti all'interno dei sorgenti del kernel + (o prevenirli) + + Questo documento è vitale per la comprensione della filosifia alla base + dello sviluppo di Linux ed è molto importante per le persone che arrivano + da esperienze con altri Sistemi Operativi. + + :ref:`Documentation/translations/it_IT/admin-guide/security-bugs.rst <it_securitybugs>` + Se ritenete di aver trovato un problema di sicurezza nel kernel Linux, + seguite i passaggi scritti in questo documento per notificarlo agli + sviluppatori del kernel, ed aiutare la risoluzione del problema. + + :ref:`Documentation/translations/it_IT/process/management-style.rst <it_managementstyle>` + Questo documento descrive come i manutentori del kernel Linux operano + e la filosofia comune alla base del loro metodo. Questa è un'importante + lettura per tutti coloro che sono nuovi allo sviluppo del kernel (o per + chi è semplicemente curioso), poiché risolve molti dei più comuni + fraintendimenti e confusioni dovuti al particolare comportamento dei + manutentori del kernel. + + :ref:`Documentation/translations/it_IT/process/stable-kernel-rules.rst <it_stable_kernel_rules>` + Questo file descrive le regole sulle quali vengono basati i rilasci del + kernel, e spiega cosa fare se si vuole che una modifica venga inserita + in uno di questi rilasci. + + :ref:`Documentation/translations/it_IT/process/kernel-docs.rst <it_kernel_docs>` + Una lista di documenti pertinenti allo sviluppo del kernel. + Per favore consultate questa lista se non trovate ciò che cercate nella + documentazione interna del kernel. + + :ref:`Documentation/translations/it_IT/process/applying-patches.rst <it_applying_patches>` + Una buona introduzione che descrivere esattamente cos'è una patch e come + applicarla ai differenti rami di sviluppo del kernel. + +Il kernel inoltre ha un vasto numero di documenti che possono essere +automaticamente generati dal codice sorgente stesso o da file +ReStructuredText (ReST), come questo. Esso include una completa +descrizione dell'API interna del kernel, e le regole su come gestire la +sincronizzazione (locking) correttamente + +Tutte queste tipologie di documenti possono essere generati in PDF o in +HTML utilizzando:: + + make pdfdocs + make htmldocs + +rispettivamente dalla cartella principale dei sorgenti del kernel. + +I documenti che impiegano ReST saranno generati nella cartella +Documentation/output. +Questi posso essere generati anche in formato LaTex e ePub con:: + + make latexdocs + make epubdocs + +Diventare uno sviluppatore del kernel +------------------------------------- +Se non sapete nulla sullo sviluppo del kernel Linux, dovreste dare uno +sguardo al progetto *Linux KernelNewbies*: + + https://kernelnewbies.org + +Esso prevede un'utile lista di discussione dove potete porre più o meno ogni +tipo di quesito relativo ai concetti fondamentali sullo sviluppo del kernel +(assicuratevi di cercare negli archivi, prima di chiedere qualcosa alla +quale è già stata fornita risposta in passato). Esistono inoltre, un canale IRC +che potete usare per formulare domande in tempo reale, e molti documenti utili +che vi faciliteranno nell'apprendimento dello sviluppo del kernel Linux. + +Il sito internet contiene informazioni di base circa l'organizzazione del +codice, sottosistemi e progetti attuali (sia interni che esterni a Linux). +Esso descrive, inoltre, informazioni logistiche di base, riguardanti ad esempio +la compilazione del kernel e l'applicazione di una modifica. + +Se non sapete dove cominciare, ma volete cercare delle attività dalle quali +partire per partecipare alla comunità di sviluppo, andate al progetto Linux +Kernel Janitor's. + + https://kernelnewbies.org/KernelJanitors + +È un buon posto da cui iniziare. Esso presenta una lista di problematiche +relativamente semplici da sistemare e pulire all'interno della sorgente del +kernel Linux. Lavorando con gli sviluppatori incaricati di questo progetto, +imparerete le basi per l'inserimento delle vostre modifiche all'interno dei +sorgenti del kernel Linux, e possibilmente, sarete indirizzati al lavoro +successivo da svolgere, se non ne avrete ancora idea. + +Prima di apportare una qualsiasi modifica al codice del kernel Linux, +è imperativo comprendere come tale codice funziona. A questo scopo, non c'è +nulla di meglio che leggerlo direttamente (la maggior parte dei bit più +complessi sono ben commentati), eventualmente anche con l'aiuto di strumenti +specializzati. Uno degli strumenti che è particolarmente raccomandato è +il progetto Linux Cross-Reference, che è in grado di presentare codice +sorgente in un formato autoreferenziale ed indicizzato. Un eccellente ed +aggiornata fonte di consultazione del codice del kernel la potete trovare qui: + + http://lxr.free-electrons.com/ + + +Il processo di sviluppo +----------------------- +Il processo di sviluppo del kernel Linux si compone di pochi "rami" principali +e di molti altri rami per specifici sottosistemi. Questi rami sono: + + - I sorgenti kernel 4.x + - I sorgenti stabili del kernel 4.x.y -stable + - Le modifiche in 4.x -git + - Sorgenti dei sottosistemi del kernel e le loro modifiche + - Il kernel 4.x -next per test d'integrazione + +I sorgenti kernel 4.x +~~~~~~~~~~~~~~~~~~~~~ + +I kernel 4.x sono amministrati da Linus Torvald, e possono essere trovati +su https://kernel.org nella cartella pub/linux/kernel/v4.x/. Il processo +di sviluppo è il seguente: + + - Non appena un nuovo kernel viene rilasciato si apre una finestra di due + settimane. Durante questo periodo i manutentori possono proporre a Linus + dei grossi cambiamenti; solitamente i cambiamenti che sono già stati + inseriti nel ramo -next del kernel per alcune settimane. Il modo migliore + per sottoporre dei cambiamenti è attraverso git (lo strumento usato per + gestire i sorgenti del kernel, più informazioni sul sito + https://git-scm.com/) ma anche delle patch vanno bene. + + - Al termine delle due settimane un kernel -rc1 viene rilasciato e + l'obbiettivo ora è quello di renderlo il più solido possibile. A questo + punto la maggior parte delle patch dovrebbero correggere un'eventuale + regressione. I bachi che sono sempre esistiti non sono considerabili come + regressioni, quindi inviate questo tipo di cambiamenti solo se sono + importanti. Notate che un intero driver (o filesystem) potrebbe essere + accettato dopo la -rc1 poiché non esistono rischi di una possibile + regressione con tale cambiamento, fintanto che quest'ultimo è + auto-contenuto e non influisce su aree esterne al codice che è stato + aggiunto. git può essere utilizzato per inviare le patch a Linus dopo che + la -rc1 è stata rilasciata, ma è anche necessario inviare le patch ad + una lista di discussione pubblica per un'ulteriore revisione. + + - Una nuova -rc viene rilasciata ogni volta che Linus reputa che gli attuali + sorgenti siano in uno stato di salute ragionevolmente adeguato ai test. + L'obiettivo è quello di rilasciare una nuova -rc ogni settimana. + + - Il processo continua fino a che il kernel è considerato "pronto"; tale + processo dovrebbe durare circa in 6 settimane. + +È utile menzionare quanto scritto da Andrew Morton sulla lista di discussione +kernel-linux in merito ai rilasci del kernel: + + *"Nessuno sa quando un kernel verrà rilasciato, poichè questo è + legato allo stato dei bachi e non ad una cronologia preventiva."* + +I sorgenti stabili del kernel 4.x.y -stable +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +I kernel con versioni in 3-parti sono "kernel stabili". Essi contengono +correzioni critiche relativamente piccole nell'ambito della sicurezza +oppure significative regressioni scoperte in un dato 4.x kernel. + +Questo è il ramo raccomandato per gli utenti che vogliono un kernel recente +e stabile e non sono interessati a dare il proprio contributo alla verifica +delle versioni di sviluppo o sperimentali. + +Se non è disponibile alcun kernel 4.x.y., quello più aggiornato e stabile +sarà il kernel 4.x con la numerazione più alta. + +4.x.y sono amministrati dal gruppo "stable" <stable@vger.kernel.org>, e sono +rilasciati a seconda delle esigenze. Il normale periodo di rilascio è +approssimativamente di due settimane, ma può essere più lungo se non si +verificano problematiche urgenti. Un problema relativo alla sicurezza, invece, +può determinare un rilascio immediato. + +Il file Documentation/process/stable-kernel-rules.rst (nei sorgenti) documenta +quali tipologie di modifiche sono accettate per i sorgenti -stable, e come +avviene il processo di rilascio. + +Le modifiche in 4.x -git +~~~~~~~~~~~~~~~~~~~~~~~~ + +Queste sono istantanee quotidiane del kernel di Linus e sono gestite in +una repositorio git (da qui il nome). Queste modifiche sono solitamente +rilasciate giornalmente e rappresentano l'attuale stato dei sorgenti di +Linus. Queste sono da considerarsi più sperimentali di un -rc in quanto +generate automaticamente senza nemmeno aver dato una rapida occhiata +per verificarne lo stato. + + +Sorgenti dei sottosistemi del kernel e le loro patch +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +I manutentori dei diversi sottosistemi del kernel --- ed anche molti +sviluppatori di sottosistemi --- mostrano il loro attuale stato di sviluppo +nei loro repositori. In questo modo, altri possono vedere cosa succede nelle +diverse parti del kernel. In aree dove lo sviluppo è rapido, potrebbe essere +chiesto ad uno sviluppatore di basare le proprie modifiche su questi repositori +in modo da evitare i conflitti fra le sottomissioni ed altri lavori in corso + +La maggior parte di questi repositori sono git, ma esistono anche altri SCM +in uso, o file di patch pubblicate come una serie quilt. +Gli indirizzi dei repositori di sottosistema sono indicati nel file +MAINTAINERS. Molti di questi posso essere trovati su https://git.kernel.org/. + +Prima che una modifica venga inclusa in questi sottosistemi, sarà soggetta ad +una revisione che inizialmente avviene tramite liste di discussione (vedere la +sezione dedicata qui sotto). Per molti sottosistemi del kernel, tale processo +di revisione è monitorato con lo strumento patchwork. +Patchwork offre un'interfaccia web che mostra le patch pubblicate, inclusi i +commenti o le revisioni fatte, e gli amministratori possono indicare le patch +come "in revisione", "accettate", o "rifiutate". Diversi siti Patchwork sono +elencati al sito https://patchwork.kernel.org/. + +Il kernel 4.x -next per test d'integrazione +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Prima che gli aggiornamenti dei sottosistemi siano accorpati nel ramo +principale 4.x, sarà necessario un test d'integrazione. +A tale scopo, esiste un repositorio speciale di test nel quale virtualmente +tutti i rami dei sottosistemi vengono inclusi su base quotidiana: + + https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git + +In questo modo, i kernel -next offrono uno sguardo riassuntivo su quello che +ci si aspetterà essere nel kernel principale nel successivo periodo +d'incorporazione. +Coloro che vorranno fare dei test d'esecuzione del kernel -next sono più che +benvenuti. + + +Riportare Bug +------------- + +https://bugzilla.kernel.org è dove gli sviluppatori del kernel Linux tracciano +i bachi del kernel. Gli utenti sono incoraggiati nel riportare tutti i bachi +che trovano utilizzando questo strumento. +Per maggiori dettagli su come usare il bugzilla del kernel, guardare: + + https://bugzilla.kernel.org/page.cgi?id=faq.html + +Il file admin-guide/reporting-bugs.rst nella cartella principale del kernel +fornisce un buon modello sul come segnalare un baco nel kernel, e spiega quali +informazioni sono necessarie agli sviluppatori per poter aiutare il +rintracciamento del problema. + +Gestire i rapporti sui bug +-------------------------- + +Uno dei modi migliori per mettere in pratica le vostre capacità di hacking è +quello di riparare bachi riportati da altre persone. Non solo aiuterete a far +diventare il kernel più stabile, ma imparerete a riparare problemi veri dal +mondo ed accrescerete le vostre competenze, e gli altri sviluppatori saranno +al corrente della vostra presenza. Riparare bachi è una delle migliori vie per +acquisire meriti tra gli altri sviluppatori, perchè non a molte persone piace +perdere tempo a sistemare i bachi di altri. + +Per lavorare sui rapporti di bachi già riportati, andate su +https://bugzilla.kernel.org. + +Liste di discussione +-------------------- + +Come descritto in molti dei documenti qui sopra, la maggior parte degli +sviluppatori del kernel partecipano alla lista di discussione Linux Kernel. +I dettagli su come iscriversi e disiscriversi dalla lista possono essere +trovati al sito: + + http://vger.kernel.org/vger-lists.html#linux-kernel + +Ci sono diversi archivi della lista di discussione. Usate un qualsiasi motore +di ricerca per trovarli. Per esempio: + + http://dir.gmane.org/gmane.linux.kernel + +É caldamente consigliata una ricerca in questi archivi sul tema che volete +sollevare, prima di pubblicarlo sulla lista. Molte cose sono già state +discusse in dettaglio e registrate negli archivi della lista di discussione. + +Molti dei sottosistemi del kernel hanno anche una loro lista di discussione +dedicata. Guardate nel file MAINTAINERS per avere una lista delle liste di +discussione e il loro uso. + +Molte di queste liste sono gestite su kernel.org. Per informazioni consultate +la seguente pagina: + + http://vger.kernel.org/vger-lists.html + +Per favore ricordatevi della buona educazione quando utilizzate queste liste. +Sebbene sia un pò dozzinale, il seguente URL contiene alcune semplici linee +guida per interagire con la lista (o con qualsiasi altra lista): + + http://www.albion.com/netiquette/ + +Se diverse persone rispondo alla vostra mail, la lista dei riceventi (copia +conoscenza) potrebbe diventare abbastanza lunga. Non cancellate nessuno dalla +lista di CC: senza un buon motivo, e non rispondete solo all'indirizzo +della lista di discussione. Fateci l'abitudine perché capita spesso di +ricevere la stessa email due volte: una dal mittente ed una dalla lista; e non +cercate di modificarla aggiungendo intestazioni stravaganti, agli altri non +piacerà. + +Ricordate di rimanere sempre in argomento e di mantenere le attribuzioni +delle vostre risposte invariate; mantenete il "John Kernelhacker wrote ...:" +in cima alla vostra replica e aggiungete le vostre risposte fra i singoli +blocchi citati, non scrivete all'inizio dell'email. + +Se aggiungete patch alla vostra mail, assicuratevi che siano del tutto +leggibili come indicato in Documentation/process/submitting-patches.rst. +Gli sviluppatori kernel non vogliono avere a che fare con allegati o patch +compresse; vogliono invece poter commentare le righe dei vostri cambiamenti, +il che può funzionare solo in questo modo. +Assicuratevi di utilizzare un gestore di mail che non alterì gli spazi ed i +caratteri. Un ottimo primo test è quello di inviare a voi stessi una mail e +cercare di sottoporre la vostra stessa patch. Se non funziona, sistemate il +vostro programma di posta, o cambiatelo, finché non funziona. + +Ed infine, per favore ricordatevi di mostrare rispetto per gli altri +sottoscriventi. + +Lavorare con la comunità +------------------------ + +L'obiettivo di questa comunità è quello di fornire il miglior kernel possibile. +Quando inviate una modifica che volete integrare, sarà valutata esclusivamente +dal punto di vista tecnico. Quindi, cosa dovreste aspettarvi? + + - critiche + - commenti + - richieste di cambiamento + - richieste di spiegazioni + - nulla + +Ricordatevi che questo fa parte dell'integrazione della vostra modifica +all'interno del kernel. Dovete essere in grado di accettare le critiche, +valutarle a livello tecnico ed eventualmente rielaborare nuovamente le vostre +modifiche o fornire delle chiare e concise motivazioni per le quali le +modifiche suggerite non dovrebbero essere fatte. +Se non riceverete risposte, aspettate qualche giorno e riprovate ancora, +qualche volta le cose si perdono nell'enorme mucchio di email. + +Cosa non dovreste fare? + + - aspettarvi che la vostra modifica venga accettata senza problemi + - mettervi sulla difensiva + - ignorare i commenti + - sottomettere nuovamente la modifica senza fare nessuno dei cambiamenti + richiesti + +In una comunità che è alla ricerca delle migliori soluzioni tecniche possibili, +ci saranno sempre opinioni differenti sull'utilità di una modifica. +Siate cooperativi e vogliate adattare la vostra idea in modo che sia inserita +nel kernel. O almeno vogliate dimostrare che la vostra idea vale. +Ricordatevi, sbagliare è accettato fintanto che siate disposti a lavorare verso +una soluzione che è corretta. + +È normale che le risposte alla vostra prima modifica possa essere +semplicemente una lista con dozzine di cose che dovreste correggere. +Questo **non** implica che la vostra patch non sarà accettata, e questo +**non** è contro di voi personalmente. +Semplicemente correggete tutte le questioni sollevate contro la vostra modifica +ed inviatela nuovamente. + +Differenze tra la comunità del kernel e le strutture aziendali +-------------------------------------------------------------- + +La comunità del kernel funziona diversamente rispetto a molti ambienti di +sviluppo aziendali. Qui di seguito una lista di cose che potete provare a +fare per evitare problemi: + + Cose da dire riguardanti le modifiche da voi proposte: + + - "Questo risolve più problematiche." + - "Questo elimina 2000 stringhe di codice." + - "Qui una modifica che spiega cosa sto cercando di fare." + - "L'ho testato su 5 diverse architetture.." + - "Qui una serie di piccole modifiche che.." + - "Questo aumenta le prestazioni di macchine standard..." + + Cose che dovreste evitare di dire: + + - "Lo abbiamo fatto in questo modo in AIX/ptx/Solaris, di conseguenza + deve per forza essere giusto..." + - "Ho fatto questo per 20 anni, quindi.." + - "Questo è richiesto dalla mia Azienda per far soldi" + - "Questo è per la linea di prodotti della nostra Azienda" + - "Ecco il mio documento di design di 1000 pagine che descrive ciò che ho + in mente" + - "Ci ho lavorato per 6 mesi..." + - "Ecco una patch da 5000 righe che.." + - "Ho riscritto il pasticcio attuale, ed ecco qua.." + - "Ho una scadenza, e questa modifica ha bisogno di essere approvata ora" + +Un'altra cosa nella quale la comunità del kernel si differenzia dai più +classici ambienti di ingegneria del software è la natura "senza volto" delle +interazioni umane. Uno dei benefici dell'uso delle email e di irc come forma +primordiale di comunicazione è l'assenza di discriminazione basata su genere e +razza. L'ambienti di lavoro Linux accetta donne e minoranze perchè tutto quello +che sei è un indirizzo email. Aiuta anche l'aspetto internazionale nel +livellare il terreno di gioco perchè non è possibile indovinare il genere +basandosi sul nome di una persona. Un uomo può chiamarsi Andrea ed una donna +potrebbe chiamarsi Pat. Gran parte delle donne che hanno lavorato al kernel +Linux e che hanno espresso una personale opinione hanno avuto esperienze +positive. + +La lingua potrebbe essere un ostacolo per quelle persone che non si trovano +a loro agio con l'inglese. Una buona padronanza del linguaggio può essere +necessaria per esporre le proprie idee in maniera appropiata all'interno +delle liste di discussione, quindi è consigliabile che rileggiate le vostre +email prima di inviarle in modo da essere certi che abbiano senso in inglese. + + +Spezzare le vostre modifiche +---------------------------- + +La comunità del kernel Linux non accetta con piacere grossi pezzi di codice +buttati lì tutti in una volta. Le modifiche necessitano di essere +adeguatamente presentate, discusse, e suddivise in parti più piccole ed +indipendenti. Questo è praticamente l'esatto opposto di quello che le +aziende fanno solitamente. La vostra proposta dovrebbe, inoltre, essere +presentata prestissimo nel processo di sviluppo, così che possiate ricevere +un riscontro su quello che state facendo. Lasciate che la comunità +senta che state lavorando con loro, e che non li stiate sfruttando come +discarica per le vostre aggiunte. In ogni caso, non inviate 50 email nello +stesso momento in una lista di discussione, il più delle volte la vostra serie +di modifiche dovrebbe essere più piccola. + +I motivi per i quali dovreste frammentare le cose sono i seguenti: + +1) Piccole modifiche aumentano le probabilità che vengano accettate, + altrimenti richiederebbe troppo tempo o sforzo nel verificarne + la correttezza. Una modifica di 5 righe può essere accettata da un + manutentore con a mala pena una seconda occhiata. Invece, una modifica da + 500 linee può richiedere ore di rilettura per verificarne la correttezza + (il tempo necessario è esponenzialmente proporzionale alla dimensione della + modifica, o giù di lì) + + Piccole modifiche sono inoltre molto facili da debuggare quando qualcosa + non va. È molto più facile annullare le modifiche una per una che + dissezionare una patch molto grande dopo la sua sottomissione (e rompere + qualcosa). + +2) È importante non solo inviare piccole modifiche, ma anche riscriverle e + semplificarle (o più semplicemente ordinarle) prima di sottoporle. + +Qui un'analogia dello sviluppatore kernel Al Viro: + + *"Pensate ad un insegnante di matematica che corregge il compito + di uno studente (di matematica). L'insegnante non vuole vedere le + prove e gli errori commessi dallo studente prima che arrivi alla + soluzione. Vuole vedere la risposta più pulita ed elegante + possibile. Un buono studente lo sa, e non presenterebbe mai le + proprie bozze prima prima della soluzione finale"* + + *"Lo stesso vale per lo sviluppo del kernel. I manutentori ed i + revisori non vogliono vedere il procedimento che sta dietro al + problema che uno sta risolvendo. Vogliono vedere una soluzione + semplice ed elegante."* + +Può essere una vera sfida il saper mantenere l'equilibrio fra una presentazione +elegante della vostra soluzione, lavorare insieme ad una comunità e dibattere +su un lavoro incompleto. Pertanto è bene entrare presto nel processo di +revisione per migliorare il vostro lavoro, ma anche per riuscire a tenere le +vostre modifiche in pezzettini che potrebbero essere già accettate, nonostante +la vostra intera attività non lo sia ancora. + +In fine, rendetevi conto che non è accettabile inviare delle modifiche +incomplete con la promessa che saranno "sistemate dopo". + + +Giustificare le vostre modifiche +-------------------------------- + +Insieme alla frammentazione delle vostre modifiche, è altrettanto importante +permettere alla comunità Linux di capire perché dovrebbero accettarle. +Nuove funzionalità devono essere motivate come necessarie ed utili. + + +Documentare le vostre modifiche +------------------------------- + +Quando inviate le vostre modifiche, fate particolare attenzione a quello che +scrivete nella vostra email. Questa diventerà il *ChangeLog* per la modifica, +e sarà visibile a tutti per sempre. Dovrebbe descrivere la modifica nella sua +interezza, contenendo: + + - perchè la modifica è necessaria + - l'approccio d'insieme alla patch + - dettagli supplementari + - risultati dei test + +Per maggiori dettagli su come tutto ciò dovrebbe apparire, riferitevi alla +sezione ChangeLog del documento: + + "The Perfect Patch" + http://www.ozlabs.org/~akpm/stuff/tpp.txt + +A volte tutto questo è difficile da realizzare. Il perfezionamento di queste +pratiche può richiedere anni (eventualmente). È un processo continuo di +miglioramento che richiede molta pazienza e determinazione. Ma non mollate, +si può fare. Molti lo hanno fatto prima, ed ognuno ha dovuto iniziare dove +siete voi ora. + + + + +---------- + +Grazie a Paolo Ciarrocchi che ha permesso che la sezione "Development Process" +(https://lwn.net/Articles/94386/) fosse basata sui testi da lui scritti, ed a +Randy Dunlap e Gerrit Huizenga per la lista di cose che dovreste e non +dovreste dire. Grazie anche a Pat Mochel, Hanna Linder, Randy Dunlap, +Kay Sievers, Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, +Andi Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop, +David A. Wheeler, Junio Hamano, Michael Kerrisk, e Alex Shepard per le +loro revisioni, commenti e contributi. Senza il loro aiuto, questo documento +non sarebbe stato possibile. + +Manutentore: Greg Kroah-Hartman <greg@kroah.com> diff --git a/Documentation/translations/it_IT/process/index.rst b/Documentation/translations/it_IT/process/index.rst new file mode 100644 index 000000000000..2eda85d5cd1e --- /dev/null +++ b/Documentation/translations/it_IT/process/index.rst @@ -0,0 +1,67 @@ +.. raw:: latex + + \renewcommand\thesection* + \renewcommand\thesubsection* + +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/index.rst <process_index>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_process_index: + +Lavorare con la comunità di sviluppo del kernel +=============================================== + +Quindi volete diventare sviluppatori del kernel? Benvenuti! C'è molto da +imparare sul lato tecnico del kernel, ma è anche importante capire come +funziona la nostra comunità. Leggere questi documenti renderà più facile +l'accettazione delle vostre modifiche con il minimo sforzo. + +Di seguito le guide che ogni sviluppatore dovrebbe leggere. + +.. toctree:: + :maxdepth: 1 + + howto + code-of-conduct + development-process + submitting-patches + coding-style + maintainer-pgp-guide + email-clients + kernel-enforcement-statement + kernel-driver-statement + +Poi ci sono altre guide sulla comunità che sono di interesse per molti +degli sviluppatori: + +.. toctree:: + :maxdepth: 1 + + changes + submitting-drivers + stable-api-nonsense + management-style + stable-kernel-rules + submit-checklist + kernel-docs + +Ed infine, qui ci sono alcune guide più tecniche che son state messe qua solo +perché non si è trovato un posto migliore. + +.. toctree:: + :maxdepth: 1 + + applying-patches + adding-syscalls + magic-number + volatile-considered-harmful + clang-format + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/translations/it_IT/process/kernel-docs.rst b/Documentation/translations/it_IT/process/kernel-docs.rst new file mode 100644 index 000000000000..7bd70d661737 --- /dev/null +++ b/Documentation/translations/it_IT/process/kernel-docs.rst @@ -0,0 +1,13 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/kernel-docs.rst <kernel_docs>` + + +.. _it_kernel_docs: + +Indice di documenti per le persone interessate a capire e/o scrivere per il kernel Linux +======================================================================================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/kernel-driver-statement.rst b/Documentation/translations/it_IT/process/kernel-driver-statement.rst new file mode 100644 index 000000000000..f016a75a9d6e --- /dev/null +++ b/Documentation/translations/it_IT/process/kernel-driver-statement.rst @@ -0,0 +1,211 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/kernel-driver-statement.rst <process_statement_driver>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_process_statement_driver: + +Dichiarazioni sui driver per il kernel +====================================== + +Presa di posizione sui moduli per il kernel Linux +------------------------------------------------- + +Noi, i sottoscritti sviluppatori del kernel, consideriamo pericoloso +o indesiderato qualsiasi modulo o driver per il kernel Linux di tipo +*a sorgenti chiusi* (*closed-source*). Ripetutamente, li abbiamo +trovati deleteri per gli utenti Linux, le aziende, ed in generale +l'ecosistema Linux. Questi moduli impediscono l'apertura, la stabilità, +la flessibilità, e la manutenibilità del modello di sviluppo di Linux +e impediscono ai loro utenti di beneficiare dell'esperienza dalla +comunità Linux. I fornitori che distribuiscono codice a sorgenti chiusi +obbligano i propri utenti a rinunciare ai principali vantaggi di Linux +o a cercarsi nuovi fornitori. +Perciò, al fine di sfruttare i vantaggi che codice aperto ha da offrire, +come l'abbattimento dei costi e un supporto condiviso, spingiamo i +fornitori ad adottare una politica di supporto ai loro clienti Linux +che preveda il rilascio dei sorgenti per il kernel. + +Parliamo solo per noi stessi, e non per una qualsiasi azienda per la +quale lavoriamo oggi, o abbiamo lavorato in passato, o lavoreremo in +futuro. + + + - Dave Airlie + - Nick Andrew + - Jens Axboe + - Ralf Baechle + - Felipe Balbi + - Ohad Ben-Cohen + - Muli Ben-Yehuda + - Jiri Benc + - Arnd Bergmann + - Thomas Bogendoerfer + - Vitaly Bordug + - James Bottomley + - Josh Boyer + - Neil Brown + - Mark Brown + - David Brownell + - Michael Buesch + - Franck Bui-Huu + - Adrian Bunk + - François Cami + - Ralph Campbell + - Luiz Fernando N. Capitulino + - Mauro Carvalho Chehab + - Denis Cheng + - Jonathan Corbet + - Glauber Costa + - Alan Cox + - Magnus Damm + - Ahmed S. Darwish + - Robert P. J. Day + - Hans de Goede + - Arnaldo Carvalho de Melo + - Helge Deller + - Jean Delvare + - Mathieu Desnoyers + - Sven-Thorsten Dietrich + - Alexey Dobriyan + - Daniel Drake + - Alex Dubov + - Randy Dunlap + - Michael Ellerman + - Pekka Enberg + - Jan Engelhardt + - Mark Fasheh + - J. Bruce Fields + - Larry Finger + - Jeremy Fitzhardinge + - Mike Frysinger + - Kumar Gala + - Robin Getz + - Liam Girdwood + - Jan-Benedict Glaw + - Thomas Gleixner + - Brice Goglin + - Cyrill Gorcunov + - Andy Gospodarek + - Thomas Graf + - Krzysztof Halasa + - Harvey Harrison + - Stephen Hemminger + - Michael Hennerich + - Tejun Heo + - Benjamin Herrenschmidt + - Kristian Høgsberg + - Henrique de Moraes Holschuh + - Marcel Holtmann + - Mike Isely + - Takashi Iwai + - Olof Johansson + - Dave Jones + - Jesper Juhl + - Matthias Kaehlcke + - Kenji Kaneshige + - Jan Kara + - Jeremy Kerr + - Russell King + - Olaf Kirch + - Roel Kluin + - Hans-Jürgen Koch + - Auke Kok + - Peter Korsgaard + - Jiri Kosina + - Aaro Koskinen + - Mariusz Kozlowski + - Greg Kroah-Hartman + - Michael Krufky + - Aneesh Kumar + - Clemens Ladisch + - Christoph Lameter + - Gunnar Larisch + - Anders Larsen + - Grant Likely + - John W. Linville + - Yinghai Lu + - Tony Luck + - Pavel Machek + - Matt Mackall + - Paul Mackerras + - Roland McGrath + - Patrick McHardy + - Kyle McMartin + - Paul Menage + - Thierry Merle + - Eric Miao + - Akinobu Mita + - Ingo Molnar + - James Morris + - Andrew Morton + - Paul Mundt + - Oleg Nesterov + - Luca Olivetti + - S.Çağlar Onur + - Pierre Ossman + - Keith Owens + - Venkatesh Pallipadi + - Nick Piggin + - Nicolas Pitre + - Evgeniy Polyakov + - Richard Purdie + - Mike Rapoport + - Sam Ravnborg + - Gerrit Renker + - Stefan Richter + - David Rientjes + - Luis R. Rodriguez + - Stefan Roese + - Francois Romieu + - Rami Rosen + - Stephen Rothwell + - Maciej W. Rozycki + - Mark Salyzyn + - Yoshinori Sato + - Deepak Saxena + - Holger Schurig + - Amit Shah + - Yoshihiro Shimoda + - Sergei Shtylyov + - Kay Sievers + - Sebastian Siewior + - Rik Snel + - Jes Sorensen + - Alexey Starikovskiy + - Alan Stern + - Timur Tabi + - Hirokazu Takata + - Eliezer Tamir + - Eugene Teo + - Doug Thompson + - FUJITA Tomonori + - Dmitry Torokhov + - Marcelo Tosatti + - Steven Toth + - Theodore Tso + - Matthias Urlichs + - Geert Uytterhoeven + - Arjan van de Ven + - Ivo van Doorn + - Rik van Riel + - Wim Van Sebroeck + - Hans Verkuil + - Horst H. von Brand + - Dmitri Vorobiev + - Anton Vorontsov + - Daniel Walker + - Johannes Weiner + - Harald Welte + - Matthew Wilcox + - Dan J. Williams + - Darrick J. Wong + - David Woodhouse + - Chris Wright + - Bryan Wu + - Rafael J. Wysocki + - Herbert Xu + - Vlad Yasevich + - Peter Zijlstra + - Bartlomiej Zolnierkiewicz + diff --git a/Documentation/translations/it_IT/process/kernel-enforcement-statement.rst b/Documentation/translations/it_IT/process/kernel-enforcement-statement.rst new file mode 100644 index 000000000000..4ddf5a35b270 --- /dev/null +++ b/Documentation/translations/it_IT/process/kernel-enforcement-statement.rst @@ -0,0 +1,13 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/kernel-enforcement-statement.rst <process_statement_kernel>` + + +.. _it_process_statement_kernel: + +Applicazione della licenza sul kernel Linux +=========================================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst new file mode 100644 index 000000000000..5281d53e57ee --- /dev/null +++ b/Documentation/translations/it_IT/process/magic-number.rst @@ -0,0 +1,170 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/magic-numbers.rst <magicnumbers>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_magicnumbers: + +I numeri magici di Linux +======================== + +Questo documento è un registro dei numeri magici in uso. Quando +aggiungete un numero magico ad una struttura, dovreste aggiungerlo anche +a questo documento; la cosa migliore è che tutti i numeri magici usati +dalle varie strutture siano unici. + +È **davvero** un'ottima idea proteggere le strutture dati del kernel con +dei numeri magici. Questo vi permette in fase d'esecuzione di (a) verificare +se una struttura è stata malmenata, o (b) avete passato a una procedura la +struttura errata. Quest'ultimo è molto utile - particolarmente quando si passa +una struttura dati tramite un puntatore void \*. Il codice tty, per esempio, +effettua questa operazione con regolarità passando avanti e indietro le +strutture specifiche per driver e discipline. + +Per utilizzare un numero magico, dovete dichiararlo all'inizio della struttura +dati, come di seguito:: + + struct tty_ldisc { + int magic; + ... + }; + +Per favore, seguite questa direttiva quando aggiungerete migliorie al kernel! +Mi ha risparmiato un numero illimitato di ore di debug, specialmente nei casi +più ostici dove si è andati oltre la dimensione di un vettore e la struttura +dati che lo seguiva in memoria è stata sovrascritta. Seguendo questa +direttiva, questi casi vengono identificati velocemente e in sicurezza. + +Registro dei cambiamenti:: + + Theodore Ts'o + 31 Mar 94 + + La tabella magica è aggiornata a Linux 2.1.55. + + Michael Chastain + <mailto:mec@shout.net> + 22 Sep 1997 + + Ora dovrebbe essere aggiornata a Linux 2.1.112. Dato che + siamo in un momento di congelamento delle funzionalità + (*feature freeze*) è improbabile che qualcosa cambi prima + della versione 2.2.x. Le righe sono ordinate secondo il + campo numero. + + Krzysztof G. Baranowski + <mailto: kgb@knm.org.pl> + 29 Jul 1998 + + Aggiornamento della tabella a Linux 2.5.45. Giusti nel congelamento + delle funzionalità ma è comunque possibile che qualche nuovo + numero magico s'intrufoli prima del kernel 2.6.x. + + Petr Baudis + <pasky@ucw.cz> + 03 Nov 2002 + + Aggiornamento della tabella magica a Linux 2.5.74. + + Fabian Frederick + <ffrederick@users.sourceforge.net> + 09 Jul 2003 + + +===================== ================ ======================== ========================================== +Nome magico Numero Struttura File +===================== ================ ======================== ========================================== +PG_MAGIC 'P' pg_{read,write}_hdr ``include/linux/pg.h`` +CMAGIC 0x0111 user ``include/linux/a.out.h`` +MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h`` +HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c`` +APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c`` +CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h`` +DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c`` +DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c`` +FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h`` +FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c`` +ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h`` +PTY_MAGIC 0x5001 ``drivers/char/pty.c`` +PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h`` +SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h`` +SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h`` +SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h`` +STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c`` +X25_ASY_MAGIC 0x5303 x25_asy ``drivers/net/x25_asy.h`` +SIXPACK_MAGIC 0x5304 sixpack ``drivers/net/hamradio/6pack.h`` +AX25_MAGIC 0x5316 ax_disp ``drivers/net/mkiss.h`` +TTY_MAGIC 0x5401 tty_struct ``include/linux/tty.h`` +MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c`` +TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h`` +MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c`` +TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h`` +USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h`` +FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c`` +USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c`` +RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c`` +USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h`` +CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h`` +RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h`` +LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c`` +GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str ``drivers/scsi/gdth_ioctl.h`` +RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c`` +NBD_REQUEST_MAGIC 0x12560953 nbd_request ``include/linux/nbd.h`` +RED_MAGIC2 0x170fc2a5 (any) ``mm/slab.c`` +BAYCOM_MAGIC 0x19730510 baycom_state ``drivers/net/baycom_epp.c`` +ISDN_X25IFACE_MAGIC 0x1e75a2b9 isdn_x25iface_proto_data ``drivers/isdn/isdn_x25iface.h`` +ECP_MAGIC 0x21504345 cdkecpsig ``include/linux/cdk.h`` +LSOMAGIC 0x27091997 lso ``drivers/fc4/fc.c`` +LSMAGIC 0x2a3b4d2a ls ``drivers/fc4/fc.c`` +WANPIPE_MAGIC 0x414C4453 sdla_{dump,exec} ``include/linux/wanpipe.h`` +CS_CARD_MAGIC 0x43525553 cs_card ``sound/oss/cs46xx.c`` +LABELCL_MAGIC 0x4857434c labelcl_info_s ``include/asm/ia64/sn/labelcl.h`` +ISDN_ASYNC_MAGIC 0x49344C01 modem_info ``include/linux/isdn.h`` +CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info ``drivers/s390/net/ctctty.c`` +ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s ``drivers/isdn/i4l/isdn_net_lib.h`` +SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg ``arch/*/amiga/config.c`` +CS_STATE_MAGIC 0x4c4f4749 cs_state ``sound/oss/cs46xx.c`` +SLAB_C_MAGIC 0x4f17a36d kmem_cache ``mm/slab.c`` +COW_MAGIC 0x4f4f4f4d cow_header_v1 ``arch/um/drivers/ubd_user.c`` +I810_CARD_MAGIC 0x5072696E i810_card ``sound/oss/i810_audio.c`` +TRIDENT_CARD_MAGIC 0x5072696E trident_card ``sound/oss/trident.c`` +ROUTER_MAGIC 0x524d4157 wan_device [in ``wanrouter.h`` pre 3.9] +SAVEKMSG_MAGIC1 0x53415645 savekmsg ``arch/*/amiga/config.c`` +GDA_MAGIC 0x58464552 gda ``arch/mips/include/asm/sn/gda.h`` +RED_MAGIC1 0x5a2cf071 (any) ``mm/slab.c`` +EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev ``drivers/atm/lanai.c`` +HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state ``include/linux/hdlcdrv.h`` +PCXX_MAGIC 0x5c6df104 channel ``drivers/char/pcxx.h`` +KV_MAGIC 0x5f4b565f kernel_vars_s ``arch/mips/include/asm/sn/klkernvars.h`` +I810_STATE_MAGIC 0x63657373 i810_state ``sound/oss/i810_audio.c`` +TRIDENT_STATE_MAGIC 0x63657373 trient_state ``sound/oss/trident.c`` +M3_CARD_MAGIC 0x646e6f50 m3_card ``sound/oss/maestro3.c`` +FW_HEADER_MAGIC 0x65726F66 fw_header ``drivers/atm/fore200e.h`` +SLOT_MAGIC 0x67267321 slot ``drivers/hotplug/cpqphp.h`` +SLOT_MAGIC 0x67267322 slot ``drivers/hotplug/acpiphp.h`` +LO_MAGIC 0x68797548 nbd_device ``include/linux/nbd.h`` +OPROFILE_MAGIC 0x6f70726f super_block ``drivers/oprofile/oprofilefs.h`` +M3_STATE_MAGIC 0x734d724d m3_state ``sound/oss/maestro3.c`` +VMALLOC_MAGIC 0x87654320 snd_alloc_track ``sound/core/memory.c`` +KMALLOC_MAGIC 0x87654321 snd_alloc_track ``sound/core/memory.c`` +PWC_MAGIC 0x89DC10AB pwc_device ``drivers/usb/media/pwc.h`` +NBD_REPLY_MAGIC 0x96744668 nbd_reply ``include/linux/nbd.h`` +ENI155_MAGIC 0xa54b872d midway_eprom ``drivers/atm/eni.h`` +CODA_MAGIC 0xC0DAC0DA coda_file_info ``fs/coda/coda_fs_i.h`` +DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram ``drivers/scsi/gdth.h`` +YAM_MAGIC 0xF10A7654 yam_port ``drivers/net/hamradio/yam.c`` +CCB_MAGIC 0xf2691ad2 ccb ``drivers/scsi/ncr53c8xx.c`` +QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry ``drivers/scsi/arm/queue.c`` +QUEUE_MAGIC_USED 0xf7e1cc33 queue_entry ``drivers/scsi/arm/queue.c`` +HTB_CMAGIC 0xFEFAFEF1 htb_class ``net/sched/sch_htb.c`` +NMI_MAGIC 0x48414d4d455201 nmi_s ``arch/mips/include/asm/sn/nmi.h`` +===================== ================ ======================== ========================================== + +Da notare che ci sono anche dei numeri magici specifici per driver nel +*sound memory management*. Consultate ``include/sound/sndmagic.h`` per una +lista completa. Molti driver audio OSS hanno i loro numeri magici costruiti a +partire dall'identificativo PCI della scheda audio - nemmeno questi sono +elencati in questo file. + +Il file-system HFS è un altro grande utilizzatore di numeri magici - potete +trovarli qui ``fs/hfs/hfs.h``. diff --git a/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst b/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst new file mode 100644 index 000000000000..24a133f0a51d --- /dev/null +++ b/Documentation/translations/it_IT/process/maintainer-pgp-guide.rst @@ -0,0 +1,13 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/maintainer-pgp-guide.rst <pgpguide>` + +.. _it_pgpguide: + +======================================== +Guida a PGP per i manutentori del kernel +======================================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/management-style.rst b/Documentation/translations/it_IT/process/management-style.rst new file mode 100644 index 000000000000..07e68bfb8402 --- /dev/null +++ b/Documentation/translations/it_IT/process/management-style.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/management-style.rst <managementstyle>` + +.. _it_managementstyle: + +Tipo di gestione del kernel Linux +================================= + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/stable-api-nonsense.rst b/Documentation/translations/it_IT/process/stable-api-nonsense.rst new file mode 100644 index 000000000000..d4fa4abf8dd3 --- /dev/null +++ b/Documentation/translations/it_IT/process/stable-api-nonsense.rst @@ -0,0 +1,13 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/stable-api-nonsense.rst <stable_api_nonsense>` + + +.. _it_stable_api_nonsense: + +L'interfaccia dei driver per il kernel Linux +============================================ + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/stable-kernel-rules.rst b/Documentation/translations/it_IT/process/stable-kernel-rules.rst new file mode 100644 index 000000000000..6fa5ce9c3572 --- /dev/null +++ b/Documentation/translations/it_IT/process/stable-kernel-rules.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` + +.. _it_stable_kernel_rules: + +Tutto quello che volevate sapere sui rilasci -stable di Linux +============================================================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst new file mode 100644 index 000000000000..b6b4dd94a660 --- /dev/null +++ b/Documentation/translations/it_IT/process/submit-checklist.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/submit-checklist.rst <submitchecklist>` + +.. _it_submitchecklist: + +Lista delle cose da fare per inviare una modifica al kernel Linux +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/submitting-drivers.rst b/Documentation/translations/it_IT/process/submitting-drivers.rst new file mode 100644 index 000000000000..16df950ef808 --- /dev/null +++ b/Documentation/translations/it_IT/process/submitting-drivers.rst @@ -0,0 +1,12 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>` + +.. _it_submittingdrivers: + +Sottomettere driver per il kernel Linux +======================================= + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/submitting-patches.rst b/Documentation/translations/it_IT/process/submitting-patches.rst new file mode 100644 index 000000000000..d633775ed556 --- /dev/null +++ b/Documentation/translations/it_IT/process/submitting-patches.rst @@ -0,0 +1,13 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` + + +.. _it_submittingpatches: + +Sottomettere modifiche: la guida essenziale per vedere il vostro codice nel kernel +================================================================================== + +.. warning:: + + TODO ancora da tradurre diff --git a/Documentation/translations/it_IT/process/volatile-considered-harmful.rst b/Documentation/translations/it_IT/process/volatile-considered-harmful.rst new file mode 100644 index 000000000000..efc640cac596 --- /dev/null +++ b/Documentation/translations/it_IT/process/volatile-considered-harmful.rst @@ -0,0 +1,134 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/volatile-considered-harmful.rst <volatile_considered_harmful>` +:Translator: Federico Vaga <federico.vaga@vaga.pv.it> + +.. _it_volatile_considered_harmful: + +Perché la parola chiave "volatile" non dovrebbe essere usata +------------------------------------------------------------ + +Spesso i programmatori C considerano volatili quelle variabili che potrebbero +essere cambiate al di fuori dal thread di esecuzione corrente; come risultato, +a volte saranno tentati dall'utilizzare *volatile* nel kernel per le +strutture dati condivise. In altre parole, gli è stato insegnato ad usare +*volatile* come una variabile atomica di facile utilizzo, ma non è così. +L'uso di *volatile* nel kernel non è quasi mai corretto; questo documento ne +descrive le ragioni. + +Il punto chiave da capire su *volatile* è che il suo scopo è quello di +sopprimere le ottimizzazioni, che non è quasi mai quello che si vuole. +Nel kernel si devono proteggere le strutture dati condivise contro accessi +concorrenti e indesiderati: questa è un'attività completamente diversa. +Il processo di protezione contro gli accessi concorrenti indesiderati eviterà +anche la maggior parte dei problemi relativi all'ottimizzazione in modo più +efficiente. + +Come *volatile*, le primitive del kernel che rendono sicuro l'accesso ai dati +(spinlock, mutex, barriere di sincronizzazione, ecc) sono progettate per +prevenire le ottimizzazioni indesiderate. Se vengono usate opportunamente, +non ci sarà bisogno di utilizzare *volatile*. Se vi sembra che *volatile* sia +comunque necessario, ci dev'essere quasi sicuramente un baco da qualche parte. +In un pezzo di codice kernel scritto a dovere, *volatile* può solo servire a +rallentare le cose. + +Considerate questo tipico blocco di codice kernel:: + + spin_lock(&the_lock); + do_something_on(&shared_data); + do_something_else_with(&shared_data); + spin_unlock(&the_lock); + +Se tutto il codice seguisse le regole di sincronizzazione, il valore di un +dato condiviso non potrebbe cambiare inaspettatamente mentre si trattiene un +lock. Un qualsiasi altro blocco di codice che vorrà usare quel dato rimarrà +in attesa del lock. Gli spinlock agiscono come barriere di sincronizzazione +- sono stati esplicitamente scritti per agire così - il che significa che gli +accessi al dato condiviso non saranno ottimizzati. Quindi il compilatore +potrebbe pensare di sapere cosa ci sarà nel dato condiviso ma la chiamata +spin_lock(), che agisce come una barriera di sincronizzazione, gli imporrà di +dimenticarsi tutto ciò che sapeva su di esso. + +Se il dato condiviso fosse stato dichiarato come *volatile*, la +sincronizzazione rimarrebbe comunque necessaria. Ma verrà impedito al +compilatore di ottimizzare gli accessi al dato anche _dentro_ alla sezione +critica, dove sappiamo che in realtà nessun altro può accedervi. Mentre si +trattiene un lock, il dato condiviso non è *volatile*. Quando si ha a che +fare con dei dati condivisi, un'opportuna sincronizzazione rende inutile +l'uso di *volatile* - anzi potenzialmente dannoso. + +L'uso di *volatile* fu originalmente pensato per l'accesso ai registri di I/O +mappati in memoria. All'interno del kernel, l'accesso ai registri, dovrebbe +essere protetto dai lock, ma si potrebbe anche desiderare che il compilatore +non "ottimizzi" l'accesso ai registri all'interno di una sezione critica. +Ma, all'interno del kernel, l'accesso alla memoria di I/O viene sempre fatto +attraverso funzioni d'accesso; accedere alla memoria di I/O direttamente +con i puntatori è sconsigliato e non funziona su tutte le architetture. +Queste funzioni d'accesso sono scritte per evitare ottimizzazioni indesiderate, +quindi, di nuovo, *volatile* è inutile. + +Un'altra situazione dove qualcuno potrebbe essere tentato dall'uso di +*volatile*, è nel caso in cui il processore è in un'attesa attiva sul valore +di una variabile. Il modo giusto di fare questo tipo di attesa è il seguente:: + + while (my_variable != what_i_want) + cpu_relax(); + +La chiamata cpu_relax() può ridurre il consumo di energia del processore +o cedere il passo ad un processore hyperthreaded gemello; funziona anche come +una barriera per il compilatore, quindi, ancora una volta, *volatile* non è +necessario. Ovviamente, tanto per puntualizzare, le attese attive sono +generalmente un atto antisociale. + +Ci sono comunque alcune rare situazioni dove l'uso di *volatile* nel kernel +ha senso: + + - Le funzioni d'accesso sopracitate potrebbero usare *volatile* su quelle + architetture che supportano l'accesso diretto alla memoria di I/O. + In pratica, ogni chiamata ad una funzione d'accesso diventa una piccola + sezione critica a se stante, e garantisce che l'accesso avvenga secondo + le aspettative del programmatore. + + - I codice *inline assembly* che fa cambiamenti nella memoria, ma che non + ha altri effetti espliciti, rischia di essere rimosso da GCC. Aggiungere + la parola chiave *volatile* a questo codice ne previene la rimozione. + + - La variabile jiffies è speciale in quanto assume un valore diverso ogni + volta che viene letta ma può essere lette senza alcuna sincronizzazione. + Quindi jiffies può essere *volatile*, ma l'aggiunta ad altre variabili di + questo è sconsigliata. Jiffies è considerata uno "stupido retaggio" + (parole di Linus) in questo contesto; correggerla non ne varrebbe la pena e + causerebbe più problemi. + + - I puntatori a delle strutture dati in una memoria coerente che potrebbe + essere modificata da dispositivi di I/O può, a volte, essere legittimamente + *volatile*. Un esempio pratico può essere quello di un adattatore di rete + che utilizza un puntatore ad un buffer circolare, questo viene cambiato + dall'adattatore per indicare quali descrittori sono stati processati. + +Per la maggior parte del codice, nessuna delle giustificazioni sopracitate può +essere considerata. Di conseguenza, l'uso di *volatile* è probabile che venga +visto come un baco e porterà a verifiche aggiuntive. Gli sviluppatori tentati +dall'uso di *volatile* dovrebbero fermarsi e pensare a cosa vogliono davvero +ottenere. + +Le modifiche che rimuovono variabili *volatile* sono generalmente ben accette +- purché accompagnate da una giustificazione che dimostri che i problemi di +concorrenza siano stati opportunamente considerati. + +Riferimenti +=========== + +[1] http://lwn.net/Articles/233481/ + +[2] http://lwn.net/Articles/233482/ + +Crediti +======= + +Impulso e ricerca originale di Randy Dunlap + +Scritto da Jonathan Corbet + +Migliorato dai commenti di Satyam Sharma, Johannes Stezenbach, Jesper +Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, e Stefan Richter. diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt index c7e985f05d8f..f901ec77439c 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.txt @@ -119,5 +119,5 @@ If a deauthorized interface will be authorized so the driver probing must be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe For drivers that need multiple interfaces all needed interfaces should be -authroized first. After that the drivers should be probed. +authorized first. After that the drivers should be probed. This avoids side effects. diff --git a/Documentation/userspace-api/spec_ctrl.rst b/Documentation/userspace-api/spec_ctrl.rst index 32f3d55c54b7..c4dbe6f7cdae 100644 --- a/Documentation/userspace-api/spec_ctrl.rst +++ b/Documentation/userspace-api/spec_ctrl.rst @@ -92,3 +92,12 @@ Speculation misfeature controls * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0); * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0); * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0); + +- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes + (Mitigate Spectre V2 style attacks against user processes) + + Invocations: + * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0); diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index cd209f7730af..356156f5c52d 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -305,6 +305,9 @@ the address space for which you want to return the dirty bitmap. They must be less than the value that KVM_CHECK_EXTENSION returns for the KVM_CAP_MULTI_ADDRESS_SPACE capability. +The bits in the dirty bitmap are cleared before the ioctl returns, unless +KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is enabled. For more information, +see the description of the capability. 4.9 KVM_SET_MEMORY_ALIAS @@ -1129,10 +1132,15 @@ documentation when it pops into existence). 4.37 KVM_ENABLE_CAP -Capability: KVM_CAP_ENABLE_CAP, KVM_CAP_ENABLE_CAP_VM -Architectures: x86 (only KVM_CAP_ENABLE_CAP_VM), - mips (only KVM_CAP_ENABLE_CAP), ppc, s390 -Type: vcpu ioctl, vm ioctl (with KVM_CAP_ENABLE_CAP_VM) +Capability: KVM_CAP_ENABLE_CAP +Architectures: mips, ppc, s390 +Type: vcpu ioctl +Parameters: struct kvm_enable_cap (in) +Returns: 0 on success; -1 on error + +Capability: KVM_CAP_ENABLE_CAP_VM +Architectures: all +Type: vcpu ioctl Parameters: struct kvm_enable_cap (in) Returns: 0 on success; -1 on error @@ -3753,6 +3761,102 @@ Coalesced pio is based on coalesced mmio. There is little difference between coalesced mmio and pio except that coalesced pio records accesses to I/O ports. +4.117 KVM_CLEAR_DIRTY_LOG (vm ioctl) + +Capability: KVM_CAP_MANUAL_DIRTY_LOG_PROTECT +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_dirty_log (in) +Returns: 0 on success, -1 on error + +/* for KVM_CLEAR_DIRTY_LOG */ +struct kvm_clear_dirty_log { + __u32 slot; + __u32 num_pages; + __u64 first_page; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding; + }; +}; + +The ioctl clears the dirty status of pages in a memory slot, according to +the bitmap that is passed in struct kvm_clear_dirty_log's dirty_bitmap +field. Bit 0 of the bitmap corresponds to page "first_page" in the +memory slot, and num_pages is the size in bits of the input bitmap. +Both first_page and num_pages must be a multiple of 64. For each bit +that is set in the input bitmap, the corresponding page is marked "clean" +in KVM's dirty bitmap, and dirty tracking is re-enabled for that page +(for example via write-protection, or by clearing the dirty bit in +a page table entry). + +If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 specifies +the address space for which you want to return the dirty bitmap. +They must be less than the value that KVM_CHECK_EXTENSION returns for +the KVM_CAP_MULTI_ADDRESS_SPACE capability. + +This ioctl is mostly useful when KVM_CAP_MANUAL_DIRTY_LOG_PROTECT +is enabled; for more information, see the description of the capability. +However, it can always be used as long as KVM_CHECK_EXTENSION confirms +that KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is present. + +4.118 KVM_GET_SUPPORTED_HV_CPUID + +Capability: KVM_CAP_HYPERV_CPUID +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_cpuid2 (in/out) +Returns: 0 on success, -1 on error + +struct kvm_cpuid2 { + __u32 nent; + __u32 padding; + struct kvm_cpuid_entry2 entries[0]; +}; + +struct kvm_cpuid_entry2 { + __u32 function; + __u32 index; + __u32 flags; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding[3]; +}; + +This ioctl returns x86 cpuid features leaves related to Hyper-V emulation in +KVM. Userspace can use the information returned by this ioctl to construct +cpuid information presented to guests consuming Hyper-V enlightenments (e.g. +Windows or Hyper-V guests). + +CPUID feature leaves returned by this ioctl are defined by Hyper-V Top Level +Functional Specification (TLFS). These leaves can't be obtained with +KVM_GET_SUPPORTED_CPUID ioctl because some of them intersect with KVM feature +leaves (0x40000000, 0x40000001). + +Currently, the following list of CPUID leaves are returned: + HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS + HYPERV_CPUID_INTERFACE + HYPERV_CPUID_VERSION + HYPERV_CPUID_FEATURES + HYPERV_CPUID_ENLIGHTMENT_INFO + HYPERV_CPUID_IMPLEMENT_LIMITS + HYPERV_CPUID_NESTED_FEATURES + +HYPERV_CPUID_NESTED_FEATURES leaf is only exposed when Enlightened VMCS was +enabled on the corresponding vCPU (KVM_CAP_HYPERV_ENLIGHTENED_VMCS). + +Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure +with the 'nent' field indicating the number of entries in the variable-size +array 'entries'. If the number of entries is too low to describe all Hyper-V +feature leaves, an error (E2BIG) is returned. If the number is more or equal +to the number of Hyper-V feature leaves, the 'nent' field is adjusted to the +number of valid entries in the 'entries' array, which is then filled. + +'index' and 'flags' fields in 'struct kvm_cpuid_entry2' are currently reserved, +userspace should not expect to get any particular value there. + 5. The kvm_run structure ------------------------ @@ -4647,6 +4751,30 @@ and injected exceptions. * For the new DR6 bits, note that bit 16 is set iff the #DB exception will clear DR6.RTM. +7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT + +Architectures: all +Parameters: args[0] whether feature should be enabled or not + +With this capability enabled, KVM_GET_DIRTY_LOG will not automatically +clear and write-protect all pages that are returned as dirty. +Rather, userspace will have to do this operation separately using +KVM_CLEAR_DIRTY_LOG. + +At the cost of a slightly more complicated operation, this provides better +scalability and responsiveness for two reasons. First, +KVM_CLEAR_DIRTY_LOG ioctl can operate on a 64-page granularity rather +than requiring to sync a full memslot; this ensures that KVM does not +take spinlocks for an extended period of time. Second, in some cases a +large amount of time can pass between a call to KVM_GET_DIRTY_LOG and +userspace actually using the data in the page. Pages can be modified +during this time, which is inefficint for both the guest and userspace: +the guest will incur a higher penalty due to write protection faults, +while userspace can see false reports of dirty pages. Manual reprotection +helps reducing this time, improving guest performance and reducing the +number of dirty log false positives. + + 8. Other capabilities. ---------------------- diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst index c4ded22197ca..2b3ab3a1ccf3 100644 --- a/Documentation/vm/index.rst +++ b/Documentation/vm/index.rst @@ -2,7 +2,9 @@ Linux Memory Management Documentation ===================================== -This is a collection of documents about Linux memory management (mm) subsystem. +This is a collection of documents about the Linux memory management (mm) +subsystem. If you are looking for advice on simply allocating memory, +see the :ref:`memory-allocation`. User guides for MM features =========================== diff --git a/Documentation/vm/unevictable-lru.rst b/Documentation/vm/unevictable-lru.rst index fdd84cb8d511..b8e29f977f2d 100644 --- a/Documentation/vm/unevictable-lru.rst +++ b/Documentation/vm/unevictable-lru.rst @@ -143,7 +143,7 @@ using a number of wrapper functions: Query the address space, and return true if it is completely unevictable. -These are currently used in two places in the kernel: +These are currently used in three places in the kernel: (1) By ramfs to mark the address spaces of its inodes when they are created, and this mark remains for the life of the inode. @@ -154,6 +154,10 @@ These are currently used in two places in the kernel: swapped out; the application must touch the pages manually if it wants to ensure they're in memory. + (3) By the i915 driver to mark pinned address space until it's unpinned. The + amount of unevictable memory marked by i915 driver is roughly the bounded + object size in debugfs/dri/0/i915_gem_objects. + Detecting Unevictable Pages --------------------------- diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index 9b93953f69cf..3a91ef5af044 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -128,8 +128,6 @@ struct watchdog_ops { int (*set_pretimeout)(struct watchdog_device *, unsigned int); unsigned int (*get_timeleft)(struct watchdog_device *); int (*restart)(struct watchdog_device *); - void (*ref)(struct watchdog_device *) __deprecated; - void (*unref)(struct watchdog_device *) __deprecated; long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); }; @@ -218,8 +216,6 @@ they are supported. These optional routines/operations are: if a command is not supported. The parameters that are passed to the ioctl call are: watchdog_device, cmd and arg. -The 'ref' and 'unref' operations are no longer used and deprecated. - The status bits should (preferably) be set with the set_bit and clear_bit alike bit-operations. The status bits that are defined are: * WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device diff --git a/Documentation/watchdog/watchdog-pm.txt b/Documentation/watchdog/watchdog-pm.txt new file mode 100644 index 000000000000..7a4dd46e0d24 --- /dev/null +++ b/Documentation/watchdog/watchdog-pm.txt @@ -0,0 +1,19 @@ +The Linux WatchDog Timer Power Management Guide +=============================================== +Last reviewed: 17-Dec-2018 + +Wolfram Sang <wsa+renesas@sang-engineering.com> + +Introduction +------------ +This document states rules about watchdog devices and their power management +handling to ensure a uniform behaviour for Linux systems. + + +Ping on resume +-------------- +On resume, a watchdog timer shall be reset to its selected value to give +userspace enough time to resume. [1] [2] + +[1] https://patchwork.kernel.org/patch/10252209/ +[2] https://patchwork.kernel.org/patch/10711625/ diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7727db8f94bc..f4c2a97bfdbd 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -58,21 +58,9 @@ Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover protocol entry point. Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields - to struct boot_params for loading bzImage and ramdisk + to struct boot_params for loading bzImage and ramdisk above 4G in 64bit. -Protocol 2.13: (Kernel 3.14) Support 32- and 64-bit flags being set in - xloadflags to support booting a 64-bit kernel from 32-bit - EFI - -Protocol 2.14: (Kernel 4.20) Added acpi_rsdp_addr holding the physical - address of the ACPI RSDP table. - The bootloader updates version with: - 0x8000 | min(kernel-version, bootloader-version) - kernel-version being the protocol version supported by - the kernel and bootloader-version the protocol version - supported by the bootloader. - **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -209,7 +197,6 @@ Offset Proto Name Meaning 0258/8 2.10+ pref_address Preferred loading address 0260/4 2.10+ init_size Linear memory required during initialization 0264/4 2.11+ handover_offset Offset of handover entry point -0268/8 2.14+ acpi_rsdp_addr Physical address of RSDP table (1) For backwards compatibility, if the setup_sects field contains 0, the real value is 4. @@ -322,7 +309,7 @@ Protocol: 2.00+ Contains the magic number "HdrS" (0x53726448). Field name: version -Type: modify +Type: read Offset/size: 0x206/2 Protocol: 2.00+ @@ -330,12 +317,6 @@ Protocol: 2.00+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version 10.17. - Up to protocol version 2.13 this information is only read by the - bootloader. From protocol version 2.14 onwards the bootloader will - write the used protocol version or-ed with 0x8000 to the field. The - used protocol version will be the minimum of the supported protocol - versions of the bootloader and the kernel. - Field name: realmode_swtch Type: modify (optional) Offset/size: 0x208/4 @@ -763,17 +744,6 @@ Offset/size: 0x264/4 See EFI HANDOVER PROTOCOL below for more details. -Field name: acpi_rsdp_addr -Type: write -Offset/size: 0x268/8 -Protocol: 2.14+ - - This field can be set by the boot loader to tell the kernel the - physical address of the ACPI RSDP table. - - A value of 0 indicates the kernel should fall back to the standard - methods to locate the RSDP. - **** THE IMAGE CHECKSUM diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/resctrl_ui.txt index 52b10945ff75..d9aed8303984 100644 --- a/Documentation/x86/intel_rdt_ui.txt +++ b/Documentation/x86/resctrl_ui.txt @@ -1,4 +1,7 @@ -User Interface for Resource Allocation in Intel Resource Director Technology +User Interface for Resource Control feature + +Intel refers to this feature as Intel Resource Director Technology(Intel(R) RDT). +AMD refers to this feature as AMD Platform Quality of Service(AMD QoS). Copyright (C) 2016 Intel Corporation @@ -6,8 +9,8 @@ Fenghua Yu <fenghua.yu@intel.com> Tony Luck <tony.luck@intel.com> Vikas Shivappa <vikas.shivappa@intel.com> -This feature is enabled by the CONFIG_INTEL_RDT Kconfig and the -X86 /proc/cpuinfo flag bits: +This feature is enabled by the CONFIG_RESCTRL and the X86 /proc/cpuinfo +flag bits: RDT (Resource Director Technology) Allocation - "rdt_a" CAT (Cache Allocation Technology) - "cat_l3", "cat_l2" CDP (Code and Data Prioritization ) - "cdp_l3", "cdp_l2" diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index ad6d2a80cf05..abc53886655e 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -209,7 +209,7 @@ IOMMU (input/output memory management unit) mapping with memory protection, etc. Kernel boot message: "PCI-DMA: Using Calgary IOMMU" - iommu=[<size>][,noagp][,off][,force][,noforce][,leak[=<nr_of_leak_pages>] + iommu=[<size>][,noagp][,off][,force][,noforce] [,memaper[=<order>]][,merge][,fullflush][,nomerge] [,noaperture][,calgary] @@ -228,9 +228,6 @@ IOMMU (input/output memory management unit) allowed Overwrite iommu off workarounds for specific chipsets. fullflush Flush IOMMU on each allocation (default). nofullflush Don't use IOMMU fullflush. - leak Turn on simple iommu leak tracing (only when - CONFIG_IOMMU_LEAK is on). Default number of leak pages - is 20. memaper[=<order>] Allocate an own aperture over RAM with size 32MB<<order. (default: order=1, i.e. 64MB) merge Do scatter-gather (SG) merging. Implies "force" diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index 73aaaa3da436..804f9426ed17 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -34,23 +34,24 @@ __________________|____________|__________________|_________|___________________ ____________________________________________________________|___________________________________________________________ | | | | ffff800000000000 | -128 TB | ffff87ffffffffff | 8 TB | ... guard hole, also reserved for hypervisor - ffff880000000000 | -120 TB | ffffc7ffffffffff | 64 TB | direct mapping of all physical memory (page_offset_base) - ffffc80000000000 | -56 TB | ffffc8ffffffffff | 1 TB | ... unused hole + ffff880000000000 | -120 TB | ffff887fffffffff | 0.5 TB | LDT remap for PTI + ffff888000000000 | -119.5 TB | ffffc87fffffffff | 64 TB | direct mapping of all physical memory (page_offset_base) + ffffc88000000000 | -55.5 TB | ffffc8ffffffffff | 0.5 TB | ... unused hole ffffc90000000000 | -55 TB | ffffe8ffffffffff | 32 TB | vmalloc/ioremap space (vmalloc_base) ffffe90000000000 | -23 TB | ffffe9ffffffffff | 1 TB | ... unused hole ffffea0000000000 | -22 TB | ffffeaffffffffff | 1 TB | virtual memory map (vmemmap_base) ffffeb0000000000 | -21 TB | ffffebffffffffff | 1 TB | ... unused hole ffffec0000000000 | -20 TB | fffffbffffffffff | 16 TB | KASAN shadow memory - fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole - | | | | vaddr_end for KASLR - fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping - fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | LDT remap for PTI - ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks __________________|____________|__________________|_________|____________________________________________________________ | - | Identical layout to the 47-bit one from here on: + | Identical layout to the 56-bit one from here on: ____________________________________________________________|____________________________________________________________ | | | | + fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole + | | | | vaddr_end for KASLR + fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping + fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole + ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole @@ -83,7 +84,7 @@ Notes: __________________|____________|__________________|_________|___________________________________________________________ | | | | 0000800000000000 | +64 PB | ffff7fffffffffff | ~16K PB | ... huge, still almost 64 bits wide hole of non-canonical - | | | | virtual memory addresses up to the -128 TB + | | | | virtual memory addresses up to the -64 PB | | | | starting offset of kernel mappings. __________________|____________|__________________|_________|___________________________________________________________ | @@ -91,23 +92,24 @@ __________________|____________|__________________|_________|___________________ ____________________________________________________________|___________________________________________________________ | | | | ff00000000000000 | -64 PB | ff0fffffffffffff | 4 PB | ... guard hole, also reserved for hypervisor - ff10000000000000 | -60 PB | ff8fffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base) - ff90000000000000 | -28 PB | ff9fffffffffffff | 4 PB | LDT remap for PTI + ff10000000000000 | -60 PB | ff10ffffffffffff | 0.25 PB | LDT remap for PTI + ff11000000000000 | -59.75 PB | ff90ffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base) + ff91000000000000 | -27.75 PB | ff9fffffffffffff | 3.75 PB | ... unused hole ffa0000000000000 | -24 PB | ffd1ffffffffffff | 12.5 PB | vmalloc/ioremap space (vmalloc_base) ffd2000000000000 | -11.5 PB | ffd3ffffffffffff | 0.5 PB | ... unused hole ffd4000000000000 | -11 PB | ffd5ffffffffffff | 0.5 PB | virtual memory map (vmemmap_base) ffd6000000000000 | -10.5 PB | ffdeffffffffffff | 2.25 PB | ... unused hole ffdf000000000000 | -8.25 PB | fffffdffffffffff | ~8 PB | KASAN shadow memory - fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole - | | | | vaddr_end for KASLR - fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping - fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole - ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks __________________|____________|__________________|_________|____________________________________________________________ | | Identical layout to the 47-bit one from here on: ____________________________________________________________|____________________________________________________________ | | | | + fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole + | | | | vaddr_end for KASLR + fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping + fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole + ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index 97b7adbceda4..68aed077f7b6 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -25,7 +25,7 @@ Offset Proto Name Meaning 0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits 140/080 ALL edid_info Video mode setup (struct edid_info) 1C0/020 ALL efi_info EFI 32 information (struct efi_info) -1E0/004 ALL alk_mem_k Alternative mem check, in KB +1E0/004 ALL alt_mem_k Alternative mem check, in KB 1E4/004 ALL scratch Scratch field for the kernel setup code 1E8/001 ALL e820_entries Number of entries in e820_table (below) 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) |
